linux-toradex.git/sound, branch v3.14.18

ALSA: hda/realtek - Avoid setting wrong COEF on ALC269 & co

2014-09-05T23:34:13+00:00

commit f3ee07d8b6e061bf34a7167c3f564e8da4360a99 upstream.

ALC269 & co have many vendor-specific setups with COEF verbs.
However, some verbs seem specific to some codec versions and they
result in the codec stalling.  Typically, such a case can be avoided
by checking the return value from reading a COEF.  If the return value
is -1, it implies that the COEF is invalid, thus it shouldn't be
written.

This patch adds the invalid COEF checks in appropriate places
accessing ALC269 and its variants.  The patch actually fixes the
resume problem on Acer AO725 laptop.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181
Tested-by: Francesco Muzio 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda - restore the gpio led after resume

2014-09-05T23:34:13+00:00

commit f475371aa65de84fa483a998ab7594531026b9d9 upstream.

On some HP laptops, the mute led is controlled by codec gpio.

When some machine resume from s3/s4, the codec gpio data will be
cleared to 0 by BIOS:
Before suspend:
  IO[3]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0
After resume:
  IO[3]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0

To skip the AFG node to enter D3 can't fix this problem.

A workaround is to restore the gpio data when the system resume
back from s3/s4. It is safe even on the machines without this
problem.

BugLink: https://bugs.launchpad.net/bugs/1358116
Tested-by: Franz Hsieh 
Signed-off-by: Hui Wang 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda - Add mute LED pin quirk for HP 15 touchsmart

2014-09-05T23:34:13+00:00

commit 423044744aa4c250058e976474856a7a41972182 upstream.

This makes the mute LED work on a HP 15 touchsmart machine.

BugLink: https://bugs.launchpad.net/bugs/1334950
Signed-off-by: David Henningsson 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: fix BOSS ME-25 MIDI regression

2014-09-05T23:34:13+00:00

commit 53da5ebfef66ea6e478ad9c6add3781472b79475 upstream.

The BOSS ME-25 turns out not to have any useful descriptors in its MIDI
interface, so its needs a quirk entry after all.

Reported-and-tested-by: Kees van Veen 
Fixes: 8e5ced83dd1c ("ALSA: usb-audio: remove superfluous Roland quirks")
Signed-off-by: Clemens Ladisch 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda/ca0132 - Don't try loading firmware at resume when already failed

2014-09-05T23:34:13+00:00

commit e24aa0a4c5ac92a171d9dd74a8d3dbf652990d36 upstream.

CA0132 driver tries to reload the firmware at resume.  Usually this
works since the firmware loader core caches the firmware contents by
itself.  However, if the driver failed to load the firmwares
(e.g. missing files), reloading the firmware at resume goes through
the actual file loading code path, and triggers a kernel WARNING like:

 WARNING: CPU: 10 PID:11371 at drivers/base/firmware_class.c:1105 _request_firmware+0x9ab/0x9d0()

For avoiding this situation, this patch makes CA0132 skipping the f/w
loading at resume when it failed at probe time.

Reported-and-tested-by: Janek Kozicki 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: virtuoso: add Xonar Essence STX II support

2014-09-05T23:34:13+00:00

commit f42bb22243d2ae264d721b055f836059fe35321f upstream.

Just add the PCI ID for the STX II.  It appears to work the same as the
STX, except for the addition of the not-yet-supported daughterboard.

Tested-by: Mario 
Tested-by: corubba 
Signed-off-by: Clemens Ladisch 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Adjust Gamecom 780 volume level

2014-09-05T23:34:13+00:00

commit 542baf94ec3c5526955b4c9fd899c7f30fae4ebe upstream.

Original patch fixed the original problem, but the sound was far too low
for most users. This patch references a compare matrix to allow the
volume levels to act normally. I personally tested this patch myself,
and volume levels returned to normal. Please see this discussion for
more details: https://bugzilla.kernel.org/show_bug.cgi?id=65251

Signed-off-by: Paul S McSpadden 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda - fix an external mic jack problem on a HP machine

2014-09-05T23:34:13+00:00

commit 7440850c20b69658f322119d20a94dc914127cc7 upstream.

ON the machine, two pin complex (0xb and 0xe) are both routed to
the same external right-side mic jack, this makes the jack can't work.

To fix this problem, set the 0xe to "not connected".

BugLink: https://bugs.launchpad.net/bugs/1350148
Tested-by: Franz Hsieh 
Signed-off-by: Hui Wang 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda - initialize audio InfoFrame to be all zero

2014-07-28T15:05:56+00:00

commit caaf5ef9493f72390905f1e97b310b8906d32dac upstream.

This patch initialized the local audio InfoFrame variable 'ai' to be all zero,
thus the data bytes will indicate "Refer to Stream Header" by default.

Signed-off-by: Mengdong Lin 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda - Fix broken PM due to incomplete i915 initialization

2014-07-28T15:05:56+00:00

commit 4da63c6fc426023d1a20e45508c47d7d68c6a53d upstream.

When the initialization of Intel HDMI controller fails due to missing
i915 kernel symbols (e.g. HD-audio is built in while i915 is module),
the driver discontinues the probe.  However, since the probe was done
asynchronously, the driver object still remains, thus the relevant PM
ops are still called at suspend/resume. This results in the bad access
to the incomplete audio card object, eventually leads to Oops or stall
at PM.

This patch adds the missing checks of chip->init_failed flag at each
PM callback in order to fix the problem above.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79561
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman