<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/tools/bpf/bpftool/bash-completion, branch master</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>bpftool: Add option to wait for program stream output</title>
<updated>2026-09-25T21:04:35+00:00</updated>
<author>
<name>Kumar Kartikeya Dwivedi</name>
<email>memxor@gmail.com</email>
</author>
<published>2026-09-25T04:55:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=0abecacb4bfddff99064b855ff28613b786fa435'/>
<id>0abecacb4bfddff99064b855ff28613b786fa435</id>
<content type='text'>
bpftool prog tracelog { stdout | stderr } PROG dumps the output buffered
in a program stream and exits, which is all BPF_PROG_STREAM_READ_BY_FD
allows. Waiting for further output means rerunning the command.

Add a -w/--wait option that opens the stream with bpf_prog_stream_open()
in its default blocking mode and keeps printing output as the program
produces it. Flush each chunk as it arrives so redirected output is not
held in stdio buffers while the next read blocks. Waiting is opt-in: the
default dump keeps using BPF_PROG_STREAM_READ_BY_FD and exits once the
buffered output is drained, so existing scripts behave the same on old and
new kernels.

A stream descriptor does not keep its program alive, so bpftool drops the
program descriptor once the stream is open. Waiting then ends with EOF
when the program is unloaded and otherwise runs until interrupted, as
bpftool prog tracelog already does for the trace pipe. Exit from the
SIGINT, SIGHUP and SIGTERM handlers like that command does. A flag set by
the handler and checked before each read would miss a signal that lands
between the check and the blocking read(), leaving bpftool asleep until the
next print.

Waiting requires BPF_PROG_STREAM_OPEN. The bpf() syscall fails with EINVAL
for an unknown command, which bpftool reports as missing kernel support
rather than degrading into a dump. Document the option and offer it in the
bash completion.

Signed-off-by: Kumar Kartikeya Dwivedi &lt;memxor@gmail.com&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Acked-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Link: https://patch.msgid.link/20260925045536.1480933-5-memxor@gmail.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
bpftool prog tracelog { stdout | stderr } PROG dumps the output buffered
in a program stream and exits, which is all BPF_PROG_STREAM_READ_BY_FD
allows. Waiting for further output means rerunning the command.

Add a -w/--wait option that opens the stream with bpf_prog_stream_open()
in its default blocking mode and keeps printing output as the program
produces it. Flush each chunk as it arrives so redirected output is not
held in stdio buffers while the next read blocks. Waiting is opt-in: the
default dump keeps using BPF_PROG_STREAM_READ_BY_FD and exits once the
buffered output is drained, so existing scripts behave the same on old and
new kernels.

A stream descriptor does not keep its program alive, so bpftool drops the
program descriptor once the stream is open. Waiting then ends with EOF
when the program is unloaded and otherwise runs until interrupted, as
bpftool prog tracelog already does for the trace pipe. Exit from the
SIGINT, SIGHUP and SIGTERM handlers like that command does. A flag set by
the handler and checked before each read would miss a signal that lands
between the check and the blocking read(), leaving bpftool asleep until the
next print.

Waiting requires BPF_PROG_STREAM_OPEN. The bpf() syscall fails with EINVAL
for an unknown command, which bpftool reports as missing kernel support
rather than degrading into a dump. Document the option and offer it in the
bash completion.

Signed-off-by: Kumar Kartikeya Dwivedi &lt;memxor@gmail.com&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Acked-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Link: https://patch.msgid.link/20260925045536.1480933-5-memxor@gmail.com
</pre>
</div>
</content>
</entry>
<entry>
<title>bpftool: Add support for BPF_F_PREORDER cgroup attach flag</title>
<updated>2026-09-24T21:15:09+00:00</updated>
<author>
<name>Hui Su</name>
<email>sh_def@163.com</email>
</author>
<published>2026-09-22T02:54:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c39bf6b6705f227ebdd191453122ac3db956db0e'/>
<id>c39bf6b6705f227ebdd191453122ac3db956db0e</id>
<content type='text'>
Commit 4b82b181a26c ("bpf: Allow pre-ordering for bpf cgroup progs")
introduced BPF_F_PREORDER to request pre-order execution across the
cgroup hierarchy. Furthermore, attachments legitimately use combinations
such as BPF_F_ALLOW_MULTI | BPF_F_PREORDER or
BPF_F_ALLOW_OVERRIDE | BPF_F_PREORDER.

With BPF_PROG_QUERY reporting the per-program BPF_F_PREORDER attribute,
bpftool's exact-match formatter falls back to "unknown(40)" when
BPF_F_PREORDER is present alone, or "unknown(41)" / "unknown(42)" when
combined with BPF_F_ALLOW_OVERRIDE or BPF_F_ALLOW_MULTI. Additionally,
do_attach() only accepts "multi" and "override", rejecting "preorder"
with "unknown option".

Before:
  $ bpftool cgroup show &lt;cg&gt;
  1234  cgroup_inet_ingress  unknown(42)  test_prog
  $ bpftool cgroup attach &lt;cg&gt; cgroup_inet_ingress id 5678 multi preorder
  Error: unknown option: preorder

After:
  $ bpftool cgroup show &lt;cg&gt;
  1234  cgroup_inet_ingress  multi,preorder  test_prog
  $ bpftool cgroup attach &lt;cg&gt; cgroup_inet_ingress id 5678 multi preorder
  (attaches successfully)

Refactor the attach flags formatter into a bitmask formatter that outputs
comma-separated flag names for plain text while preserving unrecognized
bits as "unknown(...)". Render attach flags as an array of flag names in
JSON output. Accept "preorder" in do_attach(), update the cgroup
documentation and synopsis to express valid flag combinations, and teach
bash completion about them ("multi" or "override" optionally combined
with "preorder").

Signed-off-by: Hui Su &lt;sh_def@163.com&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Acked-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Link: https://patch.msgid.link/20260922025442.3176057-4-sh_def@163.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit 4b82b181a26c ("bpf: Allow pre-ordering for bpf cgroup progs")
introduced BPF_F_PREORDER to request pre-order execution across the
cgroup hierarchy. Furthermore, attachments legitimately use combinations
such as BPF_F_ALLOW_MULTI | BPF_F_PREORDER or
BPF_F_ALLOW_OVERRIDE | BPF_F_PREORDER.

With BPF_PROG_QUERY reporting the per-program BPF_F_PREORDER attribute,
bpftool's exact-match formatter falls back to "unknown(40)" when
BPF_F_PREORDER is present alone, or "unknown(41)" / "unknown(42)" when
combined with BPF_F_ALLOW_OVERRIDE or BPF_F_ALLOW_MULTI. Additionally,
do_attach() only accepts "multi" and "override", rejecting "preorder"
with "unknown option".

Before:
  $ bpftool cgroup show &lt;cg&gt;
  1234  cgroup_inet_ingress  unknown(42)  test_prog
  $ bpftool cgroup attach &lt;cg&gt; cgroup_inet_ingress id 5678 multi preorder
  Error: unknown option: preorder

After:
  $ bpftool cgroup show &lt;cg&gt;
  1234  cgroup_inet_ingress  multi,preorder  test_prog
  $ bpftool cgroup attach &lt;cg&gt; cgroup_inet_ingress id 5678 multi preorder
  (attaches successfully)

Refactor the attach flags formatter into a bitmask formatter that outputs
comma-separated flag names for plain text while preserving unrecognized
bits as "unknown(...)". Render attach flags as an array of flag names in
JSON output. Accept "preorder" in do_attach(), update the cgroup
documentation and synopsis to express valid flag combinations, and teach
bash completion about them ("multi" or "override" optionally combined
with "preorder").

Signed-off-by: Hui Su &lt;sh_def@163.com&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Acked-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Link: https://patch.msgid.link/20260922025442.3176057-4-sh_def@163.com
</pre>
</div>
</content>
</entry>
<entry>
<title>bpftool: Read ring buffer maps with event_pipe</title>
<updated>2026-09-21T22:02:12+00:00</updated>
<author>
<name>Tianyi Chen</name>
<email>hi@tychen.cc</email>
</author>
<published>2026-09-21T07:35:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b5dc1b184f32077f45c9d31514f166b6388fa57f'/>
<id>b5dc1b184f32077f45c9d31514f166b6388fa57f</id>
<content type='text'>
map event_pipe only accepts perf event arrays, leaving no built-in way
to inspect records produced through the BPF ring buffer API. Extend it
to consume queued and live BPF_MAP_TYPE_RINGBUF records in plain or
JSON output, retaining the existing perf event array path.

Ring buffers have a shared consumer position and no implicit CPU or
timestamp. Document that this command consumes records rather than
observing them passively, and reject perf-only CPU/index selectors.

A producer can keep ring_buffer__poll() busy after a stop signal, so
return -EINTR from the record callback when stopping. Keep stdio out of
the shared signal handler and preserve callback output errors.

Signed-off-by: Tianyi Chen &lt;hi@tychen.cc&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Tested-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Link: https://github.com/libbpf/bpftool/issues/54
Link: https://lore.kernel.org/bpf/20260921073556.99421-2-hi@tychen.cc
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
map event_pipe only accepts perf event arrays, leaving no built-in way
to inspect records produced through the BPF ring buffer API. Extend it
to consume queued and live BPF_MAP_TYPE_RINGBUF records in plain or
JSON output, retaining the existing perf event array path.

Ring buffers have a shared consumer position and no implicit CPU or
timestamp. Document that this command consumes records rather than
observing them passively, and reject perf-only CPU/index selectors.

A producer can keep ring_buffer__poll() busy after a stop signal, so
return -EINTR from the record callback when stopping. Keep stdio out of
the shared signal handler and preserve callback output errors.

Signed-off-by: Tianyi Chen &lt;hi@tychen.cc&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Tested-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Link: https://github.com/libbpf/bpftool/issues/54
Link: https://lore.kernel.org/bpf/20260921073556.99421-2-hi@tychen.cc
</pre>
</div>
</content>
</entry>
<entry>
<title>bpftool: add missing fsession to the usage and docs of bpftool</title>
<updated>2026-04-12T19:42:38+00:00</updated>
<author>
<name>Menglong Dong</name>
<email>menglong8.dong@gmail.com</email>
</author>
<published>2026-04-12T06:03:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=f0e16ac716186086478836758dfb5c5df62520db'/>
<id>f0e16ac716186086478836758dfb5c5df62520db</id>
<content type='text'>
Add the fsession attach type to the usage of bpftool in do_help().
Meanwhile, add it to the bash-completion and bpftool-prog.rst too.

Acked-by: Leon Hwang &lt;leon.hwang@linux.dev&gt;
Acked-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Signed-off-by: Menglong Dong &lt;dongml2@chinatelecom.cn&gt;
Link: https://lore.kernel.org/r/20260412060346.142007-4-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add the fsession attach type to the usage of bpftool in do_help().
Meanwhile, add it to the bash-completion and bpftool-prog.rst too.

Acked-by: Leon Hwang &lt;leon.hwang@linux.dev&gt;
Acked-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Signed-off-by: Menglong Dong &lt;dongml2@chinatelecom.cn&gt;
Link: https://lore.kernel.org/r/20260412060346.142007-4-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpftool: Support merging multiple module BTFs in btf dump</title>
<updated>2026-03-05T23:03:02+00:00</updated>
<author>
<name>Josef Bacik</name>
<email>josef@toxicpanda.com</email>
</author>
<published>2026-03-04T20:56:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=d8d5c0151148b0194e8bbba66eb56d4d9cab94cd'/>
<id>d8d5c0151148b0194e8bbba66eb56d4d9cab94cd</id>
<content type='text'>
Add support for specifying multiple file sources in 'bpftool btf dump'
to generate a single C header containing types from vmlinux plus
multiple kernel modules:

  bpftool btf dump file /sys/kernel/btf/mod1 file /sys/kernel/btf/mod2 format c

This is useful for BPF programs that need to access types defined in
kernel modules. Previously this required a separate bpftool invocation
for each module, producing separate headers that could not be combined
due to overlapping vmlinux type definitions.

The implementation collects all file paths, then for the multi-file
case creates an empty split BTF on the vmlinux base and iteratively
merges each module's types into it via btf__add_btf(). The single-file
code path is preserved exactly to avoid any regression risk.

Auto-detection of vmlinux as the base BTF from sysfs paths works as
before. If vmlinux itself appears in the file list it is skipped with
a warning since its types are already provided by the base.

Assisted-by: Claude:claude-opus-4-6

Signed-off-by: Josef Bacik &lt;josef@toxicpanda.com&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Reviewed-by: Alan Maguire &lt;alan.maguire@oracle.com&gt;
Link: https://lore.kernel.org/bpf/b19c2760ffe48cec546dd3810d237f8cad20d606.1772657690.git.josef@toxicpanda.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add support for specifying multiple file sources in 'bpftool btf dump'
to generate a single C header containing types from vmlinux plus
multiple kernel modules:

  bpftool btf dump file /sys/kernel/btf/mod1 file /sys/kernel/btf/mod2 format c

This is useful for BPF programs that need to access types defined in
kernel modules. Previously this required a separate bpftool invocation
for each module, producing separate headers that could not be combined
due to overlapping vmlinux type definitions.

The implementation collects all file paths, then for the multi-file
case creates an empty split BTF on the vmlinux base and iteratively
merges each module's types into it via btf__add_btf(). The single-file
code path is preserved exactly to avoid any regression risk.

Auto-detection of vmlinux as the base BTF from sysfs paths works as
before. If vmlinux itself appears in the file list it is skipped with
a warning since its types are already provided by the base.

Assisted-by: Claude:claude-opus-4-6

Signed-off-by: Josef Bacik &lt;josef@toxicpanda.com&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Reviewed-by: Alan Maguire &lt;alan.maguire@oracle.com&gt;
Link: https://lore.kernel.org/bpf/b19c2760ffe48cec546dd3810d237f8cad20d606.1772657690.git.josef@toxicpanda.com
</pre>
</div>
</content>
</entry>
<entry>
<title>bpftool: Add 'prepend' option for tcx attach to insert at chain start</title>
<updated>2026-01-16T22:51:23+00:00</updated>
<author>
<name>Gyutae Bae</name>
<email>gyutae.bae@navercorp.com</email>
</author>
<published>2026-01-12T03:45:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=999b2395e3c32273dec98f811f0ab5c8a7441850'/>
<id>999b2395e3c32273dec98f811f0ab5c8a7441850</id>
<content type='text'>
Add support for the 'prepend' option when attaching tcx_ingress and
tcx_egress programs. This option allows inserting a BPF program at
the beginning of the TCX chain instead of appending it at the end.

The implementation uses BPF_F_BEFORE flag which automatically inserts
the program at the beginning of the chain when no relative reference
is specified.

This change includes:
- Modify do_attach_tcx() to support prepend insertion using BPF_F_BEFORE
- Update documentation to describe the new 'prepend' option
- Add bash completion support for the 'prepend' option on tcx attach types
- Add example usage in the documentation
- Add validation to reject 'overwrite' for non-XDP attach types

The 'prepend' option is only valid for tcx_ingress and tcx_egress attach
types. For XDP attach types, the existing 'overwrite' option remains
available.

Example usage:
  # bpftool net attach tcx_ingress name tc_prog dev lo prepend

This feature is useful when the order of program execution in the TCX
chain matters and users need to ensure certain programs run first.

Co-developed-by: Siwan Kim &lt;siwan.kim@navercorp.com&gt;
Signed-off-by: Siwan Kim &lt;siwan.kim@navercorp.com&gt;
Signed-off-by: Gyutae Bae &lt;gyutae.bae@navercorp.com&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Reviewed-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Acked-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20260112034516.22723-1-gyutae.opensource@navercorp.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add support for the 'prepend' option when attaching tcx_ingress and
tcx_egress programs. This option allows inserting a BPF program at
the beginning of the TCX chain instead of appending it at the end.

The implementation uses BPF_F_BEFORE flag which automatically inserts
the program at the beginning of the chain when no relative reference
is specified.

This change includes:
- Modify do_attach_tcx() to support prepend insertion using BPF_F_BEFORE
- Update documentation to describe the new 'prepend' option
- Add bash completion support for the 'prepend' option on tcx attach types
- Add example usage in the documentation
- Add validation to reject 'overwrite' for non-XDP attach types

The 'prepend' option is only valid for tcx_ingress and tcx_egress attach
types. For XDP attach types, the existing 'overwrite' option remains
available.

Example usage:
  # bpftool net attach tcx_ingress name tc_prog dev lo prepend

This feature is useful when the order of program execution in the TCX
chain matters and users need to ensure certain programs run first.

Co-developed-by: Siwan Kim &lt;siwan.kim@navercorp.com&gt;
Signed-off-by: Siwan Kim &lt;siwan.kim@navercorp.com&gt;
Signed-off-by: Gyutae Bae &lt;gyutae.bae@navercorp.com&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Reviewed-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Acked-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20260112034516.22723-1-gyutae.opensource@navercorp.com
</pre>
</div>
</content>
</entry>
<entry>
<title>bpftool: Add bash completion for program signing options</title>
<updated>2025-09-23T19:28:33+00:00</updated>
<author>
<name>Quentin Monnet</name>
<email>qmo@kernel.org</email>
</author>
<published>2025-09-23T10:38:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=0d3bf643b41bc339a02562a4aa382542d046bd0a'/>
<id>0d3bf643b41bc339a02562a4aa382542d046bd0a</id>
<content type='text'>
Commit 40863f4d6ef2 ("bpftool: Add support for signing BPF programs")
added new options for "bpftool prog load" and "bpftool gen skeleton".
This commit brings the relevant update to the bash completion file.

We rework slightly the processing of options to make completion more
resilient for options that take an argument.

Signed-off-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Link: https://lore.kernel.org/r/20250923103802.57695-1-qmo@kernel.org
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit 40863f4d6ef2 ("bpftool: Add support for signing BPF programs")
added new options for "bpftool prog load" and "bpftool gen skeleton".
This commit brings the relevant update to the bash completion file.

We rework slightly the processing of options to make completion more
resilient for options that take an argument.

Signed-off-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Link: https://lore.kernel.org/r/20250923103802.57695-1-qmo@kernel.org
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpftool: Add bash completion for token argument</title>
<updated>2025-08-02T01:03:23+00:00</updated>
<author>
<name>Tao Chen</name>
<email>chen.dylane@linux.dev</email>
</author>
<published>2025-07-23T14:44:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=f3af62b6cee8af9f07012051874af2d2a451f0e5'/>
<id>f3af62b6cee8af9f07012051874af2d2a451f0e5</id>
<content type='text'>
This commit updates the bash completion script with the
new token argument.
$ bpftool token
help  list  show

Reviewed-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Signed-off-by: Tao Chen &lt;chen.dylane@linux.dev&gt;
Link: https://lore.kernel.org/r/20250723144442.1427943-3-chen.dylane@linux.dev
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This commit updates the bash completion script with the
new token argument.
$ bpftool token
help  list  show

Reviewed-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Signed-off-by: Tao Chen &lt;chen.dylane@linux.dev&gt;
Link: https://lore.kernel.org/r/20250723144442.1427943-3-chen.dylane@linux.dev
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpftool: Add support for dumping streams</title>
<updated>2025-07-04T02:30:07+00:00</updated>
<author>
<name>Kumar Kartikeya Dwivedi</name>
<email>memxor@gmail.com</email>
</author>
<published>2025-07-03T20:48:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=876f5ebd58a9ac42f48a7ead3d5b274a314e0ace'/>
<id>876f5ebd58a9ac42f48a7ead3d5b274a314e0ace</id>
<content type='text'>
Add support for printing the BPF stream contents of a program in
bpftool. The new bpftool prog tracelog command is extended to take
stdout and stderr arguments, and then the prog specification.

The bpf_prog_stream_read() API added in previous patch is simply reused
to grab data and then it is dumped to the respective file. The stdout
data is sent to stdout, and stderr is printed to stderr.

Cc: Quentin Monnet &lt;qmo@kernel.org&gt;
Signed-off-by: Kumar Kartikeya Dwivedi &lt;memxor@gmail.com&gt;
Link: https://lore.kernel.org/r/20250703204818.925464-12-memxor@gmail.com
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add support for printing the BPF stream contents of a program in
bpftool. The new bpftool prog tracelog command is extended to take
stdout and stderr arguments, and then the prog specification.

The bpf_prog_stream_read() API added in previous patch is simply reused
to grab data and then it is dumped to the respective file. The stdout
data is sent to stdout, and stderr is printed to stderr.

Cc: Quentin Monnet &lt;qmo@kernel.org&gt;
Signed-off-by: Kumar Kartikeya Dwivedi &lt;memxor@gmail.com&gt;
Link: https://lore.kernel.org/r/20250703204818.925464-12-memxor@gmail.com
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpftool: Add support for custom BTF path in prog load/loadall</title>
<updated>2025-05-27T17:31:20+00:00</updated>
<author>
<name>Jiayuan Chen</name>
<email>jiayuan.chen@linux.dev</email>
</author>
<published>2025-05-16T14:47:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=1ae7a84ed85317b12a3395470f0cfcc900b2a61a'/>
<id>1ae7a84ed85317b12a3395470f0cfcc900b2a61a</id>
<content type='text'>
This patch exposes the btf_custom_path feature to bpftool, allowing users
to specify a custom BTF file when loading BPF programs using prog load or
prog loadall commands.

The argument 'btf_custom_path' in libbpf is used for those kernels that
don't have CONFIG_DEBUG_INFO_BTF enabled but still want to perform CO-RE
relocations.

Suggested-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Reviewed-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Signed-off-by: Jiayuan Chen &lt;jiayuan.chen@linux.dev&gt;
Link: https://lore.kernel.org/r/20250516144708.298652-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This patch exposes the btf_custom_path feature to bpftool, allowing users
to specify a custom BTF file when loading BPF programs using prog load or
prog loadall commands.

The argument 'btf_custom_path' in libbpf is used for those kernels that
don't have CONFIG_DEBUG_INFO_BTF enabled but still want to perform CO-RE
relocations.

Suggested-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Reviewed-by: Quentin Monnet &lt;qmo@kernel.org&gt;
Signed-off-by: Jiayuan Chen &lt;jiayuan.chen@linux.dev&gt;
Link: https://lore.kernel.org/r/20250516144708.298652-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
