linux-toradex.git/tools/build, branch v4.19-rc8

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2018-08-15T22:04:25+00:00

Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...

Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux

2018-07-21T04:17:12+00:00

All conflicts were trivial overlapping changes, so reasonably
easy to resolve.

Signed-off-by: David S. Miller

kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGS

2018-07-17T16:18:05+00:00

In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS
to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not
have any visible effects.

Signed-off-by: Laura Abbott 
Signed-off-by: Masahiro Yamada

kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGS

2018-07-17T16:18:05+00:00

In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.

Signed-off-by: Laura Abbott 
Signed-off-by: Masahiro Yamada

tools: include reallocarray feature test in FEATURE_TESTS_BASIC

2018-07-14T08:38:48+00:00

perf propagates its feature check results to libbpf.  This means
features for which perf probes must be a superset of libbpf's
required features.  perf depends on FEATURE_TESTS_BASIC for its list
of features.

commit 531b014e7a2f ("tools: bpf: make use of reallocarray") added
reallocarray use to libbpf, make perf also perform the reallocarray
feature check.

Fixes: 531b014e7a2f ("tools: bpf: make use of reallocarray")
Reported-by: Guenter Roeck 
Signed-off-by: Jakub Kicinski 
Tested-by: Guenter Roeck 
Signed-off-by: Daniel Borkmann

tools: build: Use HOSTLDFLAGS with fixdep

2018-07-12T15:48:18+00:00

The final link of fixdep uses LDFLAGS but not the existing HOSTLDFLAGS.
Fix this.

Signed-off-by: Laura Abbott 
Acked-by: Jiri Olsa 
Signed-off-by: Masahiro Yamada

tools: build: Fixup host c flags

2018-07-12T15:48:17+00:00

Commit 0c3b7e42616f ("tools build: Add support for host programs format")
introduced host_c_flags which referenced CHOSTFLAGS. The actual name of the
variable is HOSTCFLAGS. Fix this up.

Fixes: 0c3b7e42616f ("tools build: Add support for host programs format")
Signed-off-by: Laura Abbott 
Acked-by: Jiri Olsa 
Signed-off-by: Masahiro Yamada

tools build: fix # escaping in .cmd files for future Make

2018-07-12T15:48:17+00:00

In 2016 GNU Make made a backwards incompatible change to the way '#'
characters were handled in Makefiles when used inside functions or
macros:

http://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57

Due to this change, when attempting to run `make prepare' I get a
spurious make syntax error:

    /home/earnest/linux/tools/objtool/.fixdep.o.cmd:1: *** missing separator.  Stop.

When inspecting `.fixdep.o.cmd' it includes two lines which use
unescaped comment characters at the top:

    \# cannot find fixdep (/home/earnest/linux/tools/objtool//fixdep)
    \# using basic dep data

This is because `tools/build/Build.include' prints these '\#'
characters:

    printf '\# cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \
    printf '\# using basic dep data\n\n' >> $(dot-target).cmd;           \

This completes commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files
for future Make").

Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847
Cc: Randy Dunlap 
Cc: Rasmus Villemoes 
Cc: stable@vger.kernel.org
Signed-off-by: Paul Menzel 
Signed-off-by: Masahiro Yamada

tools: bpf: make use of reallocarray

2018-07-11T20:13:34+00:00

reallocarray() is a safer variant of realloc which checks for
multiplication overflow in case of array allocation.  Since it's
not available in Glibc < 2.26 import kernel's overflow.h and
add a static inline implementation when needed.  Use feature
detection to probe for existence of reallocarray.

Signed-off-by: Jakub Kicinski 
Reviewed-by: Quentin Monnet 
Reviewed-by: Jiong Wang 
Signed-off-by: Daniel Borkmann

Kbuild: fix # escaping in .cmd files for future Make

2018-04-10T15:03:02+00:00

I tried building using a freshly built Make (4.2.1-69-g8a731d1), but
already the objtool build broke with

orc_dump.c: In function ‘orc_dump’:
orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations]
  if (elf_getshdrnum(elf, &nr_sections)) {

Turns out that with that new Make, the backslash was not removed, so cpp
didn't see a #include directive, grep found nothing, and
-DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS.

Now, that new Make behaviour is documented in their NEWS file:

  * WARNING: Backward-incompatibility!
    Number signs (#) appearing inside a macro reference or function invocation
    no longer introduce comments and should not be escaped with backslashes:
    thus a call such as:
      foo := $(shell echo '#')
    is legal.  Previously the number sign needed to be escaped, for example:
      foo := $(shell echo '\#')
    Now this latter will resolve to "\#".  If you want to write makefiles
    portable to both versions, assign the number sign to a variable:
      C := \#
      foo := $(shell echo '$C')
    This was claimed to be fixed in 3.81, but wasn't, for some reason.
    To detect this change search for 'nocomment' in the .FEATURES variable.

This also fixes up the two make-cmd instances to replace # with $(pound)
rather than with \#. There might very well be other places that need
similar fixup in preparation for whatever future Make release contains
the above change, but at least this builds an x86_64 defconfig with the
new make.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847
Cc: Randy Dunlap 
Signed-off-by: Rasmus Villemoes 
Signed-off-by: Masahiro Yamada