linux-toradex.git/tools/include/linux/compiler.h, branch v5.12-rc6

tools headers: Get tools's linux/compiler.h closer to the kernel's

2020-12-18T20:32:26+00:00

We're cherry picking stuff from the kernel to allow for the other
headers that we keep in sync via tools/perf/check-headers.sh to work,
so introduce linux/compiler_types.h and from there get the compiler
specific stuff.

Cc: Adrian Hunter 
Cc: Ian Rogers 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Remove broken __no_tail_call attribute

2020-11-03T11:32:15+00:00

The GCC specific __attribute__((optimize)) attribute does not what is
commonly expected and is explicitly recommended against using in
production code by the GCC people.

Unlike what is often expected, it doesn't add to the optimization flags,
but it fully replaces them, loosing any and all optimization flags
provided by the compiler commandline.

The only guaranteed upon means of inhibiting tail-calls is by placing a
volatile asm with side-effects after the call such that the tail-call simply
cannot be done.

Given the original commit wasn't specific on which calls were the problem, this
removal might re-introduce the problem, which can then be re-analyzed and cured
properly.

Signed-off-by: Peter Zijlstra 
Acked-by: Ard Biesheuvel 
Acked-by: Miguel Ojeda 
Cc: Alexei Starovoitov 
Cc: Arnd Bergmann 
Cc: Arvind Sankar 
Cc: Daniel Borkmann 
Cc: Geert Uytterhoeven 
Cc: Ian Rogers 
Cc: Josh Poimboeuf 
Cc: Kees Kook 
Cc: Martin Liška 
Cc: Nick Desaulniers 
Cc: Randy Dunlap 
Cc: Thomas Gleixner 
Link: http://lore.kernel.org/lkml/20201028081123.GT2628@hirez.programming.kicks-ass.net
Signed-off-by: Arnaldo Carvalho de Melo

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-08-06T03:13:21+00:00

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

compiler: Remove uninitialized_var() macro

2020-07-16T19:35:31+00:00

Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.

As recommended[2] by[3] Linus[4], remove the macro. With the recent
change to disable -Wmaybe-uninitialized in v5.7 in commit 78a5255ffb6a
("Stop the ad-hoc games with -Wno-maybe-initialized"), this is likely
the best time to make this treewide change.

[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/

Suggested-by: Linus Torvalds 
Reviewed-by: Bart van Assche 
Reviewed-by: Miguel Ojeda 
Tested-by: Nathan Chancellor 
Tested-by: Sedat Dilek 
Signed-off-by: Kees Cook

tools headers: Adopt verbatim copy of btf_ids.h from kernel sources

2020-07-13T17:42:03+00:00

It will be needed by bpf selftest for resolve_btfids tool.

Also adding __PASTE macro as btf_ids.h dependency, which is
defined in:

  include/linux/compiler_types.h

but because tools/include do not have this header, I'm putting
the macro into linux/compiler.h header.

Signed-off-by: Jiri Olsa 
Signed-off-by: Alexei Starovoitov 
Tested-by: Andrii Nakryiko 
Acked-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/20200711215329.41165-9-jolsa@kernel.org

tools compiler.h: Add attribute to disable tail calls

2020-06-01T15:24:21+00:00

Tail call optimizations can remove stack frames that are used in
unwinding tests. Add an attribute that can be used to disable the tail
call optimization. Tested  on clang and GCC.

Committer notes:

Old versions of clang don't like that __attribute__((optimize)), so add
an ifdef to make it go away.

Signed-off-by: Ian Rogers 
Cc: Alexander Shishkin 
Cc: Alexei Starovoitov 
Cc: clang-built-linux@googlegroups.com
Cc: Jakub Kicinski 
Cc: Jiri Olsa 
Cc: Mark Rutland 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Cc: Quentin Monnet 
Cc: Stephane Eranian 
Link: http://lore.kernel.org/lkml/20200530082015.39162-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo

tools headers: Adopt verbatim copy of compiletime_assert() from kernel sources

2020-04-14T14:39:28+00:00

Will be needed when syncing the linux/bits.h header, in the next cset.

Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Signed-off-by: Arnaldo Carvalho de Melo

tools headers: Restore READ_ONCE() C++ compatibility

2018-04-12T12:30:09+00:00

Our userspace  defines READ_ONCE() in a way that clang
doesn't like, as we have an anonymous union in which neither field is
initialized.

WRITE_ONCE() is fine since it initializes the __val field. For
READ_ONCE() we can keep clang and GCC happy with a dummy initialization
of the __c field, so let's do that.

At the same time, let's split READ_ONCE() and WRITE_ONCE() over several
lines for legibility, as we do in the in-kernel .

Reported-by: Li Zhijian 
Reported-by: Sandipan Das 
Tested-by: Sandipan Das 
Signed-off-by: Mark Rutland 
Fixes: 6aa7de059173a986 ("locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()")
Link: http://lkml.kernel.org/r/20180404163445.16492-1-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo

tools/include: Remove ACCESS_ONCE()

2017-12-12T12:22:10+00:00

There are no longer any usersapce uses of ACCESS_ONCE(), so we can
remove the definition from our userspace , which is
only used by tools in the kernel directory (i.e. it isn't a uapi
header).

This patch removes the ACCESS_ONCE() definition, and updates comments
which referred to it. At the same time, some inconsistent and redundant
whitespace is removed from comments.

Tested-by: Paul E. McKenney 
Signed-off-by: Mark Rutland 
Cc: Arnaldo Carvalho de Melo 
Cc: Joe Perches 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: apw@canonical.com
Link: http://lkml.kernel.org/r/20171127103824.36526-3-mark.rutland@arm.com
Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman