Pull networking fixes from Jakub Kicinski:
 "Cross-tree/merge window issues:

   - rtl8150: don't incorrectly assign random MAC addresses; fix late in
     the 5.9 cycle started depending on a return code from a function
     which changed with the 5.10 PR from the usb subsystem

  Current release regressions:

   - Revert "virtio-net: ethtool configurable RXCSUM", it was causing
     crashes at probe when control vq was not negotiated/available

  Previous release regressions:

   - ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
     bus, only first device would be probed correctly

   - nexthop: Fix performance regression in nexthop deletion by
     effectively switching from recently added synchronize_rcu() to
     synchronize_rcu_expedited()

   - netsec: ignore 'phy-mode' device property on ACPI systems; the
     property is not populated correctly by the firmware, but firmware
     configures the PHY so just keep boot settings

  Previous releases - always broken:

   - tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
     bulk transfers getting "stuck"

   - icmp: randomize the global rate limiter to prevent attackers from
     getting useful signal

   - r8169: fix operation under forced interrupt threading, make the
     driver always use hard irqs, even on RT, given the handler is light
     and only wants to schedule napi (and do so through a _irqoff()
     variant, preferably)

   - bpf: Enforce pointer id generation for all may-be-null register
     type to avoid pointers erroneously getting marked as null-checked

   - tipc: re-configure queue limit for broadcast link

   - net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
     tunnels

   - fix various issues in chelsio inline tls driver

  Misc:

   - bpf: improve just-added bpf_redirect_neigh() helper api to support
     supplying nexthop by the caller - in case BPF program has already
     done a lookup we can avoid doing another one

   - remove unnecessary break statements

   - make MCTCP not select IPV6, but rather depend on it"

* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  tcp: fix to update snd_wl1 in bulk receiver fast path
  net: Properly typecast int values to set sk_max_pacing_rate
  netfilter: nf_fwd_netdev: clear timestamp in forwarding path
  ibmvnic: save changed mac address to adapter->mac_addr
  selftests: mptcp: depends on built-in IPv6
  Revert "virtio-net: ethtool configurable RXCSUM"
  rtnetlink: fix data overflow in rtnl_calcit()
  net: ethernet: mtk-star-emac: select REGMAP_MMIO
  net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
  net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
  bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
  bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
  bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
  mptcp: depends on IPV6 but not as a module
  sfc: move initialisation of efx->filter_sem to efx_init_struct()
  mpls: load mpls_gso after mpls_iptunnel
  net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
  net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
  net: dsa: bcm_sf2: make const array static, makes object smaller
  mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
  ...

Yaniv reported a compilation error after pulling latest libbpf:

  [...]
  ../libbpf/src/root/usr/include/bpf/bpf_helpers.h:99:10: error:
  unknown register name 'r0' in asm
                     : "r0", "r1", "r2", "r3", "r4", "r5");
  [...]

The issue got triggered given Yaniv was compiling tracing programs with native
target (e.g. x86) instead of BPF target, hence no BTF generated vmlinux.h nor
CO-RE used, and later llc with -march=bpf was invoked to compile from LLVM IR
to BPF object file. Given that clang was expecting x86 inline asm and not BPF
one the error complained that these regs don't exist on the former.

Guard bpf_tail_call_static() with defined(__bpf__) where BPF inline asm is valid
to use. BPF tracing programs on more modern kernels use BPF target anyway and
thus the bpf_tail_call_static() function will be available for them. BPF inline
asm is supported since clang 7 (clang <= 6 otherwise throws same above error),
and __bpf_unreachable() since clang 8, therefore include the latter condition
in order to prevent compilation errors for older clang versions. Given even an
old Ubuntu 18.04 LTS has official LLVM packages all the way up to llvm-10, I did
not bother to special case the __bpf_unreachable() inside bpf_tail_call_static()
further.

Also, undo the sockex3_kern's use of bpf_tail_call_static() sample given they
still have the old hacky way to even compile networking progs with native instead
of BPF target so bpf_tail_call_static() won't be defined there anymore.

Fixes: 0e9f6841f664 ("bpf, libbpf: Add bpf_tail_call_static helper for bpf programs")
Reported-by: Yaniv Agman <yanivagman@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Tested-by: Yaniv Agman <yanivagman@gmail.com>
Link: https://lore.kernel.org/bpf/CAMy7=ZUk08w5Gc2Z-EKi4JFtuUCaZYmE4yzhJjrExXpYKR4L8w@mail.gmail.com
Link: https://lore.kernel.org/bpf/20201021203257.26223-1-daniel@iogearbox.net

Pull perf tools updates from Arnaldo Carvalho de Melo:

 - cgroup improvements for 'perf stat', allowing for compact
   specification of events and cgroups in the command line.

 - Support per thread topdown metrics in 'perf stat'.

 - Support sample-read topdown metric group in 'perf record'

 - Show start of latency in addition to its start in 'perf sched
   latency'.

 - Add min, max to 'perf script' futex-contention output, in addition to
   avg.

 - Allow usage of 'perf_event_attr->exclusive' attribute via the new
   ':e' event modifier.

 - Add 'snapshot' command to 'perf record --control', using it with
   Intel PT.

 - Support FIFO file names as alternative options to 'perf record
   --control'.

 - Introduce branch history "streams", to compare 'perf record' runs
   with 'perf diff' based on branch records and report hot streams.

 - Support PE executable symbol tables using libbfd, to profile, for
   instance, wine binaries.

 - Add filter support for option 'perf ftrace -F/--funcs'.

 - Allow configuring the 'disassembler_style' 'perf annotate' knob via
   'perf config'

 - Update CascadelakeX and SkylakeX JSON vendor events files.

 - Add support for parsing perchip/percore JSON vendor events.

 - Add power9 hv_24x7 core level metric events.

 - Add L2 prefetch, ITLB instruction fetch hits JSON events for AMD
   zen1.

 - Enable Family 19h users by matching Zen2 AMD vendor events.

 - Use debuginfod in 'perf probe' when required debug files not found
   locally.

 - Display negative tid in non-sample events in 'perf script'.

 - Make GTK2 support opt-in

 - Add build test with GTK+

 - Add missing -lzstd to the fast path feature detection

 - Add scripts to auto generate 'mmap', 'mremap' string<->id tables for
   use in 'perf trace'.

 - Show python test script in verbose mode.

 - Fix uncore metric expressions

 - Msan uninitialized use fixes.

 - Use condition variables in 'perf bench numa'

 - Autodetect python3 binary in systems without python2.

 - Support md5 build ids in addition to sha1.

 - Add build id 'perf test' regression test.

 - Fix printable strings in python3 scripts.

 - Fix off by ones in 'perf trace' in arches using libaudit.

 - Fix JSON event code for events referencing std arch events.

 - Introduce 'perf test' shell script for Arm CoreSight testing.

 - Add rdtsc() for Arm64 for used in the PERF_RECORD_TIME_CONV metadata
   event and in 'perf test tsc'.

 - 'perf c2c' improvements: Add "RMT Load Hit" metric, "Total Stores",
   fixes and documentation update.

 - Fix usage of reloc_sym in 'perf probe' when using both kallsyms and
   debuginfo files.

 - Do not print 'Metric Groups:' unnecessarily in 'perf list'

 - Refcounting fixes in the event parsing code.

 - Add expand cgroup event 'perf test' entry.

 - Fix out of bounds CPU map access when handling armv8_pmu events in
   'perf stat'.

 - Add build-id injection 'perf bench' benchmark.

 - Enter namespace when reading build-id in 'perf inject'.

 - Do not load map/dso when injecting build-id speeding up the 'perf
   inject' process.

 - Add --buildid-all option to avoid processing all samples, just the
   mmap metadata events.

 - Add feature test to check if libbfd has buildid support

 - Add 'perf test' entry for PE binary format support.

 - Fix typos in power8 PMU vendor events JSON files.

 - Hide libtraceevent non API functions.

* tag 'perf-tools-for-v5.10-2020-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (113 commits)
  perf c2c: Update documentation for metrics reorganization
  perf c2c: Add metrics "RMT Load Hit"
  perf c2c: Correct LLC load hit metrics
  perf c2c: Change header for LLC local hit
  perf c2c: Use more explicit headers for HITM
  perf c2c: Change header from "LLC Load Hitm" to "Load Hitm"
  perf c2c: Organize metrics based on memory hierarchy
  perf c2c: Display "Total Stores" as a standalone metrics
  perf c2c: Display the total numbers continuously
  perf bench: Use condition variables in numa.
  perf jevents: Fix event code for events referencing std arch events
  perf diff: Support hot streams comparison
  perf streams: Report hot streams
  perf streams: Calculate the sum of total streams hits
  perf streams: Link stream pair
  perf streams: Compare two streams
  perf streams: Get the evsel_streams by evsel_idx
  perf streams: Introduce branch history "streams"
  perf intel-pt: Improve PT documentation slightly
  perf tools: Add support for exclusive groups/events
  ...

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...

Pull kselftest updates from Shuah Khan:

 - a selftests harness fix to flush stdout before forking to avoid
   parent and child printing duplicates messages. This is evident when
   test output is redirected to a file.

 - a tools/ wide change to avoid comma separated statements from Joe
   Perches. This fix spans tools/lib, tools/power/cpupower, and
   selftests.

* tag 'linux-kselftest-fixes-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  tools: Avoid comma separated statements
  selftests/harness: Flush stdout before forking

We do not store size with build ids in perf data, but there's enough
space to do it. Adding misc bit PERF_RECORD_MISC_BUILD_ID_SIZE to mark
build id event with size.

With this fix the dso with md5 build id will have correct build id data
and will be usable for debuginfod processing if needed (coming in
following patches).

Committer notes:

Use %zu with size_t to fix this error on 32-bit arches:

  util/header.c: In function '__event_process_build_id':
  util/header.c:2105:3: error: format '%lu' expects argument of type 'long unsigned int', but argument 6 has type 'size_t' [-Werror=format=]
     pr_debug("build id event received for %s: %s [%lu]\n",
     ^

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20201013192441.1299447-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick fixes that missed v5.9.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

There are internal library functions, which are not declared as a static.
They are used inside the library from different files. Hide them from
the library users, as they are not part of the API.
These functions are made hidden and are renamed without the prefix "tep_":
 tep_free_plugin_paths
 tep_peek_char
 tep_buffer_init
 tep_get_input_buf_ptr
 tep_get_input_buf
 tep_read_token
 tep_free_token
 tep_free_event
 tep_free_format_field
 __tep_parse_format

Link: https://lore.kernel.org/linux-trace-devel/e4afdd82deb5e023d53231bb13e08dca78085fb0.camel@decadent.org.uk/
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200930110733.280534-1-tz.stoyanov@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-10-12

The main changes are:

1) The BPF verifier improvements to track register allocation pattern, from Alexei and Yonghong.

2) libbpf relocation support for different size load/store, from Andrii.

3) bpf_redirect_peer() helper and support for inner map array with different max_entries, from Daniel.

4) BPF support for per-cpu variables, form Hao.

5) sockmap improvements, from John.
====================

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use generalized BTF parsing logic, making it possible to parse BTF both from
ELF file, as well as a raw BTF dump. This makes it easier to write custom
tests with manually generated BTFs.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201008001025.292064-4-andrii@kernel.org