linux-toradex.git/tools/perf/ui/tui/setup.c, branch v4.10

perf tools: Remove needless includes from cache.h

2016-07-12T18:19:58+00:00

The cache.h header doesn't use any of the definitions in some of the
headers it includes, ditch them and fix the fallout, where files were
getting stuff they needed just because they were including it, sometimes
not using what it really exports at all.

Cc: Adrian Hunter 
Cc: David Ahern 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Cc: Wang Nan 
Link: http://lkml.kernel.org/n/tip-l6r2bmj8h1g3e01wr981on0n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf ui tui: Register the error callbacks before initializing the widgets

2015-10-22T19:44:17+00:00

I.e. we want to tell the user about errors found during, for instance,
the ui_browser initialization, so that a call to ui__warning() appears
as a window waiting for a key to be pressed.

Cc: Adrian Hunter 
Cc: Borislav Petkov 
Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Cc: Stephane Eranian 
Cc: Wang Nan 
Link: http://lkml.kernel.org/n/tip-ederrwizcl6mfz10vfobl5qq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Make Ctrl-C stop processing on TUI

2015-05-29T15:49:00+00:00

It was inconvenient that perf cannot be quit with SIGINT during
processing samples on TUI especially for large data files.

This was because the first argument of SLang_init_tty(), abort_char,
being 0.  The manual says it's the ascii value of the control character
that will be used to generate the interrupt signal [1].  Passing -1
means to use the default value (Ctrl-C).

However, after processing samples, Ctrl-C was used to in other cases as
well - like stepping back from annotate.  So recover the original
behavior after processing.

[1] http://jedsoft.org/slang/doc/html/cslang-6.html#ss6.1

Signed-off-by: Namhyung Kim 
Tested-by: Arnaldo Carvalho de Melo 
Cc: David Ahern 
Cc: Jiri Olsa 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1432904024-13170-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf ui/tui: Show fatal error message only if exists

2015-01-22T20:05:10+00:00

When perf exits with some error it shows the error message with
ui__error() or ui__warning() and then calls ui__exit() during
exit_browser().

On TUI, it then shows a window titled "Fatal Error" to inform user a
last message which might be related with this condition.  However it
sometimes contains no message and just annoyes users.

The usual case for this is running perf top as normal user.  (And
/proc/sys/kernel/perf_event_paranoid being 1).

Signed-off-by: Namhyung Kim 
Acked-by: Jiri Olsa 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1421736050-5283-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf ui/tui: Print backtrace symbols when segfault occurs

2014-12-23T15:05:59+00:00

The output will look like below.  (I added an error into ui__init() for
the test).

  $ perf report
  perf: Segmentation fault
  -------- backtrace --------
  perf[0x503781]
  /usr/lib/libc.so.6(+0x33b20)[0x7f1a14f04b20]
  perf(ui__init+0xd5)[0x503645]
  perf(setup_browser+0x97)[0x4ce4e7]
  perf(cmd_report+0xcea)[0x4392ba]
  perf[0x428493]
  perf(main+0x60a)[0x427c0a]
  /usr/lib/libc.so.6(__libc_start_main+0xf0)[0x7f1a14ef1040]
  perf[0x427d29]
  [0x0]

Signed-off-by: Namhyung Kim 
Cc: Adrian Hunter 
Cc: David Ahern 
Cc: Ingo Molnar 
Cc: Jiri Olsa 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/r/1419223455-4362-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf ui: Rename ui_progress to ui_progress_ops

2013-10-23T17:41:23+00:00

Reserving 'struct ui_progress' to the per progress instances, not to the
particular set of operations used to implmenet a progress bar in the
current UI (GTK, TUI, etc).

Cc: Adrian Hunter 
Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Jiri Olsa 
Cc: Mike Galbraith 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-zjqbfp9gx3yo45s0rp9uv42n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Remove dependency on libnewt

2013-04-01T15:23:21+00:00

Now that the map browser shares the input routine with the hists
browser, there is no need for using any libnewt routine, so remove all
traces except for honouring NO_NEWT=1 on the makefile command line as an
indication that TUI support is not needed, in fact it just sets
NO_SLANG=1.

Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Jiri Olsa 
Cc: Mike Galbraith 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-wae5o7xca9m52bj1re28jc5j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf ui: Introduce generic ui_progress helper

2012-11-14T19:52:39+00:00

Make ui_progress functions generic so that UI frontend code will add its
callbacks.

Signed-off-by: Namhyung Kim 
Cc: Ingo Molnar 
Cc: Pekka Enberg 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1352813436-14173-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Use __maybe_used for unused variables

2012-09-11T15:19:15+00:00

perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored

__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.

The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.

Signed-off-by: Irina Tirdea 
Acked-by: Pekka Enberg 
Cc: David Ahern 
Cc: Ingo Molnar 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Steven Rostedt 
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with a116e05 in builtin-sched.c ]
Signed-off-by: Arnaldo Carvalho de Melo

perf hists browser: Use perf_hpp__format functions

2012-09-08T16:20:13+00:00

Override hpp->color functions for TUI. Because line coloring is done
outside of the function, it just sets the percent value and pass it.

Signed-off-by: Namhyung Kim 
Cc: Ingo Molnar 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1346640790-17197-5-git-send-email-namhyung@kernel.org
[ committer note: Keep previous layout by showing the overhead at column 1 ]
Signed-off-by: Arnaldo Carvalho de Melo