linux-toradex.git/tools/perf/util/pmu.h, branch v4.9.52

perf list jevents: Add support for event list topics

2016-10-04T00:35:47+00:00

Add support to group the output of perf list by the Topic field in the
JSON file.

Example output:

% perf list
...
Cache:
  l1d.replacement
       [L1D data line replacements]
  l1d_pend_miss.pending
       [L1D miss oustandings duration in cycles]
  l1d_pend_miss.pending_cycles
       [Cycles with L1D load Misses outstanding]
  l2_l1d_wb_rqsts.all
       [Not rejected writebacks from L1D to L2 cache lines in any state]
  l2_l1d_wb_rqsts.hit_e
       [Not rejected writebacks from L1D to L2 cache lines in E state]
  l2_l1d_wb_rqsts.hit_m
       [Not rejected writebacks from L1D to L2 cache lines in M state]

...
Pipeline:
  arith.fpu_div
       [Divide operations executed]
  arith.fpu_div_active
       [Cycles when divider is busy executing divide operations]
  baclears.any
       [Counts the total number when the front end is resteered, mainly
       when the BPU cannot provide a correct prediction and this is
       corrected by other branch handling mechanisms at the front end]
  br_inst_exec.all_branches
       [Speculative and retired branches]
  br_inst_exec.all_conditional
       [Speculative and retired macro-conditional branches]
  br_inst_exec.all_direct_jmp
       [Speculative and retired macro-unconditional branches excluding
       calls and indirects]
  br_inst_exec.all_direct_near_call
       [Speculative and retired direct near calls]
  br_inst_exec.all_indirect_jump_non_call_ret

Signed-off-by: Andi Kleen 
Signed-off-by: Sukadev Bhattiprolu 
Acked-by: Ingo Molnar 
Acked-by: Jiri Olsa 
Tested-by: Arnaldo Carvalho de Melo 
Cc: Madhavan Srinivasan 
Cc: Peter Zijlstra 
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-14-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo

perf list: Support long jevents descriptions

2016-10-04T00:35:47+00:00

Previously we were dropping the useful longer descriptions that some
events have in the event list completely. This patch makes them appear with
perf list.

Old perf list:

baclears:
  baclears.all
       [Counts the number of baclears]

vs new:

perf list -v:
...
baclears:
  baclears.all
       [The BACLEARS event counts the number of times the front end is
        resteered, mainly when the Branch Prediction Unit cannot provide
        a correct prediction and this is corrected by the Branch Address
        Calculator at the front end. The BACLEARS.ANY event counts the
        number of baclears for any type of branch]

Signed-off-by: Andi Kleen 
Signed-off-by: Sukadev Bhattiprolu 
Acked-by: Ingo Molnar 
Acked-by: Jiri Olsa 
Cc: Madhavan Srinivasan 
Cc: Peter Zijlstra 
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-13-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo

perf list: Add a --no-desc flag

2016-10-04T00:35:45+00:00

Add a --no-desc flag to 'perf list' to not print the event descriptions
that were earlier added for JSON events. This may be useful to get a
less crowded listing.

It's still default to print descriptions as that is the more useful
default for most users.

Signed-off-by: Andi Kleen 
Signed-off-by: Sukadev Bhattiprolu 
Acked-by: Ingo Molnar 
Acked-by: Jiri Olsa 
Tested-by: Arnaldo Carvalho de Melo 
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1473978296-20712-9-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo

perf pmu: Support alias descriptions

2016-10-04T00:34:54+00:00

Add support to print alias descriptions in perf list, which are taken
from the generated event files.

The sorting code is changed to put the events with descriptions at the
end. The descriptions are printed as possibly multiple word wrapped
lines.

Example output:

% perf list
...
  arith.fpu_div
       [Divide operations executed]
  arith.fpu_div_active
       [Cycles when divider is busy executing divide operations]

Committer notes:

Further testing on a Broadwell machine (ThinkPad t450s), using these
files:

  $ find tools/perf/pmu-events/arch/x86/
  tools/perf/pmu-events/arch/x86/
  tools/perf/pmu-events/arch/x86/Broadwell
  tools/perf/pmu-events/arch/x86/Broadwell/Cache.json
  tools/perf/pmu-events/arch/x86/Broadwell/Other.json
  tools/perf/pmu-events/arch/x86/Broadwell/Frontend.json
  tools/perf/pmu-events/arch/x86/Broadwell/Virtual-Memory.json
  tools/perf/pmu-events/arch/x86/Broadwell/Pipeline.json
  tools/perf/pmu-events/arch/x86/Broadwell/Floating-point.json
  tools/perf/pmu-events/arch/x86/Broadwell/Memory.json
  tools/perf/pmu-events/arch/x86/mapfile.csv
  $

Taken from:

https://github.com/sukadev/linux/tree/json-code+data-v21/tools/perf/pmu-events/arch/x86/

to get this machinery to actually parse JSON files, generate
$(OUTPUT)pmu-events/pmu-events.c, compile it and link it with perf, that
will then use the table it contains, these files will be submitted right
after this patchkit.

  [acme@jouet linux]$ perf list page_walker

  List of pre-defined events (to be used in -e):

    page_walker_loads.dtlb_l1
         [Number of DTLB page walker hits in the L1+FB]
    page_walker_loads.dtlb_l2
         [Number of DTLB page walker hits in the L2]
    page_walker_loads.dtlb_l3
         [Number of DTLB page walker hits in the L3 + XSNP]
    page_walker_loads.dtlb_memory
         [Number of DTLB page walker hits in Memory]
    page_walker_loads.itlb_l1
         [Number of ITLB page walker hits in the L1+FB]
    page_walker_loads.itlb_l2
         [Number of ITLB page walker hits in the L2]
    page_walker_loads.itlb_l3
         [Number of ITLB page walker hits in the L3 + XSNP]

[acme@jouet linux]$

Signed-off-by: Andi Kleen 
Signed-off-by: Sukadev Bhattiprolu 
Acked-by: Ingo Molnar 
Acked-by: Jiri Olsa 
Tested-by: Arnaldo Carvalho de Melo 
Cc: Madhavan Srinivasan 
Cc: Peter Zijlstra 
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-7-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo

perf pmu: Push configuration down to PMU driver

2016-09-22T15:19:41+00:00

This patch adds a PMU callback and the required mechanic so that drivers
can process the command line configuration elements found in
evsel::config_terms.

Signed-off-by: Mathieu Poirier 
Acked-by: Jiri Olsa 
Cc: Alexander Shishkin 
Cc: Peter Zijlstra 
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1474041004-13956-6-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Add perf_pmu__format_bits()

2015-08-06T19:49:01+00:00

Add perf_pmu__format_bits() to get the format bits for a PMU config
term.  Intel PT will use this to validate terms and to record format
bits to enable later interpreting the config from the attribute stored
in the perf.data file.

Signed-off-by: Adrian Hunter 
Cc: Jiri Olsa 
Link: http://lkml.kernel.org/r/1437150840-31811-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Add term support for parse_events_error

2015-04-29T13:38:01+00:00

Allowing event's term processing to report back error, like:

  $ perf record -e 'cpu/even=0x1/' ls
  event syntax error: 'cpu/even=0x1/'
                           \___ unknown term

  valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type

Signed-off-by: Jiri Olsa 
Tested-by: Arnaldo Carvalho de Melo 
Cc: David Ahern 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1429729824-13932-7-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Add snapshot format file parsing

2014-11-24T21:03:51+00:00

The .snapshot file indicates that the provided event value is a snapshot
value and we have to bypass the delta computation logic.

Adding support to check up this file and set event flag accordingly.

Signed-off-by: Jiri Olsa 
Cc: Andi Kleen 
Cc: Corey Ashford 
Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Ingo Molnar 
Cc: Matt Fleming 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/r/1416562275-12404-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Add per-pkg format file parsing

2014-11-24T21:03:51+00:00

The .per-pkg file indicates that all but one value per socket should be
discarded. Adding support to check up this file and set event flag
accordingly.

This patch is part of Matt's original patch:

http://marc.info/?l=linux-kernel&m=141527675002139&w=2 only the file
parsing part, the rest is solved differently.

Signed-off-by: Matt Fleming 
Cc: Andi Kleen 
Cc: Corey Ashford 
Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Ingo Molnar 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/r/1416562275-12404-9-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa 
Signed-off-by: Arnaldo Carvalho de Melo

perf pmu: Let pmu's with no events show up on perf list

2014-10-29T12:32:48+00:00

perf list only lists PMUs with events.  Add a flag to cause a PMU to be
also listed separately.

Signed-off-by: Adrian Hunter 
Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/r/1414061124-26830-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo