linux-toradex.git/tools/scripts, branch v5.17-rc4 Linux kernel for Apalis and Colibri modules tools: Ignore errors from `which' when searching a GCC toolchain 2022-02-01T22:04:12+00:00 Jean-Philippe Brucker jean-philippe@linaro.org 2022-02-01T09:31:20+00:00 b7892f7d5cb2b8187c603dd8ea3a7c44059ccfc2 When cross-building tools with clang, we run `which $(CROSS_COMPILE)gcc` to detect whether a GCC toolchain provides the standard libraries. It is only a helper because some distros put libraries where LLVM does not automatically find them. On other systems, LLVM detects the libc automatically and does not need this. There, it is completely fine not to have a GCC at all, but some versions of `which' display an error when the command is not found: which: no aarch64-linux-gnu-gcc in ($PATH) Since the error can safely be ignored, throw it to /dev/null. Fixes: cebdb7374577 ("tools: Help cross-building with clang") Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/bpf/20220201093119.1713207-1-jean-philippe@linaro.org 
When cross-building tools with clang, we run `which $(CROSS_COMPILE)gcc`
to detect whether a GCC toolchain provides the standard libraries. It is
only a helper because some distros put libraries where LLVM does not
automatically find them. On other systems, LLVM detects the libc
automatically and does not need this. There, it is completely fine not
to have a GCC at all, but some versions of `which' display an error when
the command is not found:

  which: no aarch64-linux-gnu-gcc in ($PATH)

Since the error can safely be ignored, throw it to /dev/null.

Fixes: cebdb7374577 ("tools: Help cross-building with clang")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/bpf/20220201093119.1713207-1-jean-philippe@linaro.org
tools: Help cross-building with clang 2021-12-16T20:15:04+00:00 Jean-Philippe Brucker jean-philippe@linaro.org 2021-12-16T16:38:38+00:00 cebdb7374577ac6e14afb11311af8c2c44a259fa Cross-compilation with clang uses the -target parameter rather than a toolchain prefix. Just like the kernel Makefile, add that parameter to CFLAGS when CROSS_COMPILE is set. Unlike the kernel Makefile, we use the --sysroot and --gcc-toolchain options because unlike the kernel, tools require standard libraries. Commit c91d4e47e10e ("Makefile: Remove '--gcc-toolchain' flag") provides some background about --gcc-toolchain. Normally clang finds on its own the additional utilities and libraries that it needs (for example GNU ld or glibc). On some systems however, this autodetection doesn't work. There, our only recourse is asking GCC directly, and pass the result to --sysroot and --gcc-toolchain. Of course that only works when a cross GCC is available. Autodetection worked fine on Debian, but to use the aarch64-linux-gnu toolchain from Archlinux I needed both --sysroot (for crt1.o) and --gcc-toolchain (for crtbegin.o, -lgcc). The --prefix parameter wasn't needed there, but it might be useful on other distributions. Use the CLANG_CROSS_FLAGS variable instead of CLANG_FLAGS because it allows tools such as bpftool, that need to build both host and target binaries, to easily filter out the cross-build flags from CFLAGS. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Quentin Monnet <quentin@isovalent.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/bpf/20211216163842.829836-2-jean-philippe@linaro.org 
Cross-compilation with clang uses the -target parameter rather than a
toolchain prefix. Just like the kernel Makefile, add that parameter to
CFLAGS when CROSS_COMPILE is set.

Unlike the kernel Makefile, we use the --sysroot and --gcc-toolchain
options because unlike the kernel, tools require standard libraries.
Commit c91d4e47e10e ("Makefile: Remove '--gcc-toolchain' flag") provides
some background about --gcc-toolchain. Normally clang finds on its own
the additional utilities and libraries that it needs (for example GNU ld
or glibc). On some systems however, this autodetection doesn't work.
There, our only recourse is asking GCC directly, and pass the result to
--sysroot and --gcc-toolchain. Of course that only works when a cross
GCC is available.

Autodetection worked fine on Debian, but to use the aarch64-linux-gnu
toolchain from Archlinux I needed both --sysroot (for crt1.o) and
--gcc-toolchain (for crtbegin.o, -lgcc). The --prefix parameter wasn't
needed there, but it might be useful on other distributions.

Use the CLANG_CROSS_FLAGS variable instead of CLANG_FLAGS because it
allows tools such as bpftool, that need to build both host and target
binaries, to easily filter out the cross-build flags from CFLAGS.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-2-jean-philippe@linaro.org
tools, build: Add RISC-V to HOSTARCH parsing 2021-11-01T16:08:21+00:00 Björn Töpel bjorn@kernel.org 2021-10-28T16:10:55+00:00 b390d69831ee30e10a4ef410bee157e73b149036 Add RISC-V to the HOSTARCH parsing, so that ARCH is "riscv", and not "riscv32" or "riscv64". This affects the perf and libbpf builds, so that arch specific includes are correctly picked up for RISC-V. Signed-off-by: Björn Töpel <bjorn@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211028161057.520552-3-bjorn@kernel.org 
Add RISC-V to the HOSTARCH parsing, so that ARCH is "riscv", and not
"riscv32" or "riscv64".

This affects the perf and libbpf builds, so that arch specific
includes are correctly picked up for RISC-V.

Signed-off-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211028161057.520552-3-bjorn@kernel.org
tools build: Fix quiet cmd indentation 2021-05-17T03:10:03+00:00 Kees Cook keescook@chromium.org 2021-04-21T18:58:48+00:00 c6de37dd5e48b883db032aa4dc0547a4858b9f20 The tools quiet cmd output has mismatched indentation (and extra space character between cmd name and target name) compared to the rest of kbuild out: HOSTCC scripts/insert-sys-cert LD /srv/code/tools/objtool/arch/x86/objtool-in.o LD /srv/code/tools/objtool/libsubcmd-in.o AR /srv/code/tools/objtool/libsubcmd.a HOSTLD scripts/genksyms/genksyms CC scripts/mod/empty.o HOSTCC scripts/mod/mk_elfconfig CC scripts/mod/devicetable-offsets.s MKELF scripts/mod/elfconfig.h HOSTCC scripts/mod/modpost.o HOSTCC scripts/mod/file2alias.o HOSTCC scripts/mod/sumversion.o LD /srv/code/tools/objtool/objtool-in.o LINK /srv/code/tools/objtool/objtool HOSTLD scripts/mod/modpost CC kernel/bounds.s Adjust to match the rest of kbuild. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 
The tools quiet cmd output has mismatched indentation (and extra space
character between cmd name and target name) compared to the rest of
kbuild out:

  HOSTCC  scripts/insert-sys-cert
  LD       /srv/code/tools/objtool/arch/x86/objtool-in.o
  LD       /srv/code/tools/objtool/libsubcmd-in.o
  AR       /srv/code/tools/objtool/libsubcmd.a
  HOSTLD  scripts/genksyms/genksyms
  CC      scripts/mod/empty.o
  HOSTCC  scripts/mod/mk_elfconfig
  CC      scripts/mod/devicetable-offsets.s
  MKELF   scripts/mod/elfconfig.h
  HOSTCC  scripts/mod/modpost.o
  HOSTCC  scripts/mod/file2alias.o
  HOSTCC  scripts/mod/sumversion.o
  LD       /srv/code/tools/objtool/objtool-in.o
  LINK     /srv/code/tools/objtool/objtool
  HOSTLD  scripts/mod/modpost
  CC      kernel/bounds.s

Adjust to match the rest of kbuild.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
tools: disable -Wno-type-limits 2021-05-07T02:24:11+00:00 Yury Norov yury.norov@gmail.com 2021-05-07T01:02:42+00:00 d1d1a2cd4627724c37539892db8efa611d2cbd70 Patch series "lib/find_bit: fast path for small bitmaps", v6. Bitmap operations are much simpler and faster in case of small bitmaps which fit into a single word. In linux/bitmap.c we have a machinery that allows compiler to replace actual function call with a few instructions if bitmaps passed into the function are small and their size is known at compile time. find_*_bit() API lacks this functionality; but users will benefit from it a lot. One important example is cpumask subsystem when NR_CPUS <= BITS_PER_LONG. This patch (of 12): GENMASK(h, l) may be passed with unsigned types. In such case, type-limits warning is generated for example in case of GENMASK(h, 0). Link: https://lkml.kernel.org/r/20210401003153.97325-1-yury.norov@gmail.com Link: https://lkml.kernel.org/r/20210401003153.97325-2-yury.norov@gmail.com Signed-off-by: Yury Norov <yury.norov@gmail.com> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Alexey Klimov <aklimov@redhat.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Sterba <dsterba@suse.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jianpeng Ma <jianpeng.ma@intel.com> Cc: Joe Perches <joe@perches.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Rich Felker <dalias@libc.org> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Patch series "lib/find_bit: fast path for small bitmaps", v6.

Bitmap operations are much simpler and faster in case of small bitmaps
which fit into a single word.  In linux/bitmap.c we have a machinery that
allows compiler to replace actual function call with a few instructions if
bitmaps passed into the function are small and their size is known at
compile time.

find_*_bit() API lacks this functionality; but users will benefit from it
a lot.  One important example is cpumask subsystem when NR_CPUS <=
BITS_PER_LONG.

This patch (of 12):

GENMASK(h, l) may be passed with unsigned types.  In such case,
type-limits warning is generated for example in case of GENMASK(h, 0).

Link: https://lkml.kernel.org/r/20210401003153.97325-1-yury.norov@gmail.com
Link: https://lkml.kernel.org/r/20210401003153.97325-2-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Alexey Klimov <aklimov@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jianpeng Ma <jianpeng.ma@intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2021-04-29T18:57:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-04-29T18:57:23+00:00 9d31d2338950293ec19d9b095fbaa9030899dcb4 Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ... 
Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...
tools: Allow proper CC/CXX/... override with LLVM=1 in Makefile.include 2021-04-15T23:50:21+00:00 Yonghong Song yhs@fb.com 2021-04-13T15:34:19+00:00 f62700ce63a315b4607cc9e97aa15ea409a677b9 selftests/bpf/Makefile includes tools/scripts/Makefile.include. With the following command make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1 some files are still compiled with gcc. This patch fixed the case if CC/AR/LD/CXX/STRIP is allowed to be overridden, it will be written to clang/llvm-ar/..., instead of gcc binaries. The definition of CC_NO_CLANG is also relocated to the place after the above CC is defined. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210413153419.3028165-1-yhs@fb.com 
selftests/bpf/Makefile includes tools/scripts/Makefile.include.
With the following command
  make -j60 LLVM=1 LLVM_IAS=1  <=== compile kernel
  make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed the case if CC/AR/LD/CXX/STRIP is allowed to be
overridden, it will be written to clang/llvm-ar/..., instead of
gcc binaries. The definition of CC_NO_CLANG is also relocated
to the place after the above CC is defined.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153419.3028165-1-yhs@fb.com
Documentation: Replace more lkml.org links with lore 2021-03-07T00:36:52+00:00 Kees Cook keescook@chromium.org 2021-02-10T23:40:05+00:00 c9491aad97e67e45216d5181a2dc56ebf1a0bc04 As started by commit 05a5f51ca566 ("Documentation: Replace lkml.org links with lore"), replace a few more scattered lkml.org links with lore to better use a single source that's more likely to stay available long-term. Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210210234005.2236201-1-keescook@chromium.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> 
As started by commit 05a5f51ca566 ("Documentation: Replace lkml.org
links with lore"), replace a few more scattered lkml.org links with
lore to better use a single source that's more likely to stay available
long-term.

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210234005.2236201-1-keescook@chromium.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Merge tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux 2021-02-22T21:59:43+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-02-22T21:59:43+00:00 3a36281a17199737b468befb826d4a23eb774445 Pull perf tool updates from Arnaldo Carvalho de Melo: "New features: - Support instruction latency in 'perf report', with both memory latency (weight) and instruction latency information, users can locate expensive load instructions and understand time spent in different stages. - Extend 'perf c2c' to display the number of loads which were blocked by data or address conflict. - Add 'perf stat' support for L2 topdown events in systems such as Intel's Sapphire rapids server. - Add support for PERF_SAMPLE_CODE_PAGE_SIZE in various tools, as a sort key, for instance: perf report --stdio --sort=comm,symbol,code_page_size - New 'perf daemon' command to run long running sessions while providing a way to control the enablement of events without restarting a traditional 'perf record' session. - Enable counting events for BPF programs in 'perf stat' just like for other targets (tid, cgroup, cpu, etc), e.g.: # perf stat -e ref-cycles,cycles -b 254 -I 1000 1.487903822 115,200 ref-cycles 1.487903822 86,012 cycles 2.489147029 80,560 ref-cycles 2.489147029 73,784 cycles ^C The example above counts 'cycles' and 'ref-cycles' of BPF program of id 254. It is similar to bpftool-prog-profile command, but more flexible. - Support the new layout for PERF_RECORD_MMAP2 to carry the DSO build-id using infrastructure generalised from the eBPF subsystem, removing the need for traversing the perf.data file to collect build-ids at the end of 'perf record' sessions and helping with long running sessions where binaries can get replaced in updates, leading to possible mis-resolution of symbols. - Support filtering by hex address in 'perf script'. - Support DSO filter in 'perf script', like in other perf tools. - Add namespaces support to 'perf inject' - Add support for SDT (Dtrace Style Markers) events on ARM64. perf record: - Fix handling of eventfd() when draining a buffer in 'perf record'. - Improvements to the generation of metadata events for pre-existing threads (mmaps, comm, etc), speeding up the work done at the start of system wide or per CPU 'perf record' sessions. Hardware tracing: - Initial support for tracing KVM with Intel PT. - Intel PT fixes for IPC - Support Intel PT PSB (synchronization packets) events. - Automatically group aux-output events to overcome --filter syntax. - Enable PERF_SAMPLE_DATA_SRC on ARMs SPE. - Update ARM's CoreSight hardware tracing OpenCSD library to v1.0.0. perf annotate TUI: - Fix handling of 'k' ("show line number") hotkey - Fix jump parsing for C++ code. perf probe: - Add protection to avoid endless loop. cgroups: - Avoid reading cgroup mountpoint multiple times, caching it. - Fix handling of cgroup v1/v2 in mixed hierarchy. Symbol resolving: - Add OCaml symbol demangling. - Further fixes for handling PE executables when using perf with Wine and .exe/.dll files. - Fix 'perf unwind' DSO handling. - Resolve symbols against debug file first, to deal with artifacts related to LTO. - Fix gap between kernel end and module start on powerpc. Reporting tools: - The DSO filter shouldn't show samples in unresolved maps. - Improve debuginfod support in various tools. build ids: - Fix 16-byte build ids in 'perf buildid-cache', add a 'perf test' entry for that case. perf test: - Support for PERF_SAMPLE_WEIGHT_STRUCT. - Add test case for PERF_SAMPLE_CODE_PAGE_SIZE. - Shell based tests for 'perf daemon's commands ('start', 'stop, 'reconfig', 'list', etc). - ARM cs-etm 'perf test' fixes. - Add parse-metric memory bandwidth testcase. Compiler related: - Fix 'perf probe' kretprobe issue caused by gcc 11 bug when used with -fpatchable-function-entry. - Fix ARM64 build with gcc 11's -Wformat-overflow. - Fix unaligned access in sample parsing test. - Fix printf conversion specifier for IP addresses on arm64, s390 and powerpc. Arch specific: - Support exposing Performance Monitor Counter SPRs as part of extended regs on powerpc. - Add JSON 'perf stat' metrics for ARM64's imx8mp, imx8mq and imx8mn DDR, fix imx8mm ones. - Fix common and uarch events for ARM64's A76 and Ampere eMag" * tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (148 commits) perf buildid-cache: Don't skip 16-byte build-ids perf buildid-cache: Add test for 16-byte build-id perf symbol: Remove redundant libbfd checks perf test: Output the sub testing result in cs-etm perf test: Suppress logs in cs-etm testing perf tools: Fix arm64 build error with gcc-11 perf intel-pt: Add documentation for tracing virtual machines perf intel-pt: Split VM-Entry and VM-Exit branches perf intel-pt: Adjust sample flags for VM-Exit perf intel-pt: Allow for a guest kernel address filter perf intel-pt: Support decoding of guest kernel perf machine: Factor out machine__idle_thread() perf machine: Factor out machines__find_guest() perf intel-pt: Amend decoder to track the NR flag perf intel-pt: Retain the last PIP packet payload as is perf intel_pt: Add vmlaunch and vmresume as branches perf script: Add branch types for VM-Entry and VM-Exit perf auxtrace: Automatically group aux-output events perf test: Fix unaligned access in sample parsing test perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing ... 
Pull perf tool updates from Arnaldo Carvalho de Melo:
 "New features:

   - Support instruction latency in 'perf report', with both memory
     latency (weight) and instruction latency information, users can
     locate expensive load instructions and understand time spent in
     different stages.

   - Extend 'perf c2c' to display the number of loads which were blocked
     by data or address conflict.

   - Add 'perf stat' support for L2 topdown events in systems such as
     Intel's Sapphire rapids server.

   - Add support for PERF_SAMPLE_CODE_PAGE_SIZE in various tools, as a
     sort key, for instance:

        perf report --stdio --sort=comm,symbol,code_page_size

   - New 'perf daemon' command to run long running sessions while
     providing a way to control the enablement of events without
     restarting a traditional 'perf record' session.

   - Enable counting events for BPF programs in 'perf stat' just like
     for other targets (tid, cgroup, cpu, etc), e.g.:

        # perf stat -e ref-cycles,cycles -b 254 -I 1000
           1.487903822            115,200      ref-cycles
           1.487903822             86,012      cycles
           2.489147029             80,560      ref-cycles
           2.489147029             73,784      cycles
        ^C

     The example above counts 'cycles' and 'ref-cycles' of BPF program
     of id 254. It is similar to bpftool-prog-profile command, but more
     flexible.

   - Support the new layout for PERF_RECORD_MMAP2 to carry the DSO
     build-id using infrastructure generalised from the eBPF subsystem,
     removing the need for traversing the perf.data file to collect
     build-ids at the end of 'perf record' sessions and helping with
     long running sessions where binaries can get replaced in updates,
     leading to possible mis-resolution of symbols.

   - Support filtering by hex address in 'perf script'.

   - Support DSO filter in 'perf script', like in other perf tools.

   - Add namespaces support to 'perf inject'

   - Add support for SDT (Dtrace Style Markers) events on ARM64.

  perf record:

   - Fix handling of eventfd() when draining a buffer in 'perf record'.

   - Improvements to the generation of metadata events for pre-existing
     threads (mmaps, comm, etc), speeding up the work done at the start
     of system wide or per CPU 'perf record' sessions.

  Hardware tracing:

   - Initial support for tracing KVM with Intel PT.

   - Intel PT fixes for IPC

   - Support Intel PT PSB (synchronization packets) events.

   - Automatically group aux-output events to overcome --filter syntax.

   - Enable PERF_SAMPLE_DATA_SRC on ARMs SPE.

   - Update ARM's CoreSight hardware tracing OpenCSD library to v1.0.0.

  perf annotate TUI:

   - Fix handling of 'k' ("show line number") hotkey

   - Fix jump parsing for C++ code.

  perf probe:

   - Add protection to avoid endless loop.

  cgroups:

   - Avoid reading cgroup mountpoint multiple times, caching it.

   - Fix handling of cgroup v1/v2 in mixed hierarchy.

  Symbol resolving:

   - Add OCaml symbol demangling.

   - Further fixes for handling PE executables when using perf with Wine
     and .exe/.dll files.

   - Fix 'perf unwind' DSO handling.

   - Resolve symbols against debug file first, to deal with artifacts
     related to LTO.

   - Fix gap between kernel end and module start on powerpc.

  Reporting tools:

   - The DSO filter shouldn't show samples in unresolved maps.

   - Improve debuginfod support in various tools.

  build ids:

   - Fix 16-byte build ids in 'perf buildid-cache', add a 'perf test'
     entry for that case.

  perf test:

   - Support for PERF_SAMPLE_WEIGHT_STRUCT.

   - Add test case for PERF_SAMPLE_CODE_PAGE_SIZE.

   - Shell based tests for 'perf daemon's commands ('start', 'stop,
     'reconfig', 'list', etc).

   - ARM cs-etm 'perf test' fixes.

   - Add parse-metric memory bandwidth testcase.

  Compiler related:

   - Fix 'perf probe' kretprobe issue caused by gcc 11 bug when used
     with -fpatchable-function-entry.

   - Fix ARM64 build with gcc 11's -Wformat-overflow.

   - Fix unaligned access in sample parsing test.

   - Fix printf conversion specifier for IP addresses on arm64, s390 and
     powerpc.

  Arch specific:

   - Support exposing Performance Monitor Counter SPRs as part of
     extended regs on powerpc.

   - Add JSON 'perf stat' metrics for ARM64's imx8mp, imx8mq and imx8mn
     DDR, fix imx8mm ones.

   - Fix common and uarch events for ARM64's A76 and Ampere eMag"

* tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (148 commits)
  perf buildid-cache: Don't skip 16-byte build-ids
  perf buildid-cache: Add test for 16-byte build-id
  perf symbol: Remove redundant libbfd checks
  perf test: Output the sub testing result in cs-etm
  perf test: Suppress logs in cs-etm testing
  perf tools: Fix arm64 build error with gcc-11
  perf intel-pt: Add documentation for tracing virtual machines
  perf intel-pt: Split VM-Entry and VM-Exit branches
  perf intel-pt: Adjust sample flags for VM-Exit
  perf intel-pt: Allow for a guest kernel address filter
  perf intel-pt: Support decoding of guest kernel
  perf machine: Factor out machine__idle_thread()
  perf machine: Factor out machines__find_guest()
  perf intel-pt: Amend decoder to track the NR flag
  perf intel-pt: Retain the last PIP packet payload as is
  perf intel_pt: Add vmlaunch and vmresume as branches
  perf script: Add branch types for VM-Entry and VM-Exit
  perf auxtrace: Automatically group aux-output events
  perf test: Fix unaligned access in sample parsing test
  perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing
  ...
tools: Factor Clang, LLC and LLVM utils definitions 2021-01-29T00:25:34+00:00 Sedat Dilek sedat.dilek@gmail.com 2021-01-28T01:50:58+00:00 211a741cd3e124bffdc13ee82e7e65f204e53f60 When dealing with BPF/BTF/pahole and DWARF v5 I wanted to build bpftool. While looking into the source code I found duplicate assignments in misc tools for the LLVM eco system, e.g. clang and llvm-objcopy. Move the Clang, LLC and/or LLVM utils definitions to tools/scripts/Makefile.include file and add missing includes where needed. Honestly, I was inspired by the commit c8a950d0d3b9 ("tools: Factor HOSTCC, HOSTLD, HOSTAR definitions"). I tested with bpftool and perf on Debian/testing AMD64 and LLVM/Clang v11.1.0-rc1. Build instructions: [ make and make-options ] MAKE="make V=1" MAKE_OPTS="HOSTCC=clang HOSTCXX=clang++ HOSTLD=ld.lld CC=clang LD=ld.lld LLVM=1 LLVM_IAS=1" MAKE_OPTS="$MAKE_OPTS PAHOLE=/opt/pahole/bin/pahole" [ clean-up ] $MAKE $MAKE_OPTS -C tools/ clean [ bpftool ] $MAKE $MAKE_OPTS -C tools/bpf/bpftool/ [ perf ] PYTHON=python3 $MAKE $MAKE_OPTS -C tools/perf/ I was careful with respecting the user's wish to override custom compiler, linker, GNU/binutils and/or LLVM utils settings. Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> # tools/build and tools/perf Link: https://lore.kernel.org/bpf/20210128015117.20515-1-sedat.dilek@gmail.com 
When dealing with BPF/BTF/pahole and DWARF v5 I wanted to build bpftool.

While looking into the source code I found duplicate assignments in misc tools
for the LLVM eco system, e.g. clang and llvm-objcopy.

Move the Clang, LLC and/or LLVM utils definitions to tools/scripts/Makefile.include
file and add missing includes where needed. Honestly, I was inspired by the commit
c8a950d0d3b9 ("tools: Factor HOSTCC, HOSTLD, HOSTAR definitions").

I tested with bpftool and perf on Debian/testing AMD64 and LLVM/Clang v11.1.0-rc1.

Build instructions:

[ make and make-options ]
MAKE="make V=1"
MAKE_OPTS="HOSTCC=clang HOSTCXX=clang++ HOSTLD=ld.lld CC=clang LD=ld.lld LLVM=1 LLVM_IAS=1"
MAKE_OPTS="$MAKE_OPTS PAHOLE=/opt/pahole/bin/pahole"

[ clean-up ]
$MAKE $MAKE_OPTS -C tools/ clean

[ bpftool ]
$MAKE $MAKE_OPTS -C tools/bpf/bpftool/

[ perf ]
PYTHON=python3 $MAKE $MAKE_OPTS -C tools/perf/

I was careful with respecting the user's wish to override custom compiler, linker,
GNU/binutils and/or LLVM utils settings.

Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com> # tools/build and tools/perf
Link: https://lore.kernel.org/bpf/20210128015117.20515-1-sedat.dilek@gmail.com