<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/tools/testing/selftests/alsa, branch master</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>selftests: ALSA: pcmtest: Compare all captured bytes in ni_capture</title>
<updated>2026-10-21T12:59:58+00:00</updated>
<author>
<name>HyeongJun An</name>
<email>sammiee5311@gmail.com</email>
</author>
<published>2026-10-21T11:25:54+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c8c199e1b1b3bb0ef52a2a02d1ec87bee574ce13'/>
<id>c8c199e1b1b3bb0ef52a2a02d1ec87bee574ce13</id>
<content type='text'>
The ni_capture test reads rate * time frames into each channel buffer
and then compares rate * time bytes. A frame is sample_size bytes per
channel, so with S16_LE only the first half of each channel is checked.
If the second half is wrong the test still passes.

Compare rate * time * sample_size bytes per channel.

Fixes: 10b98a4db11a ("selftests: ALSA: Add test for the 'pcmtest' driver")
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: HyeongJun An &lt;sammiee5311@gmail.com&gt;
Link: https://patch.msgid.link/20261021112554.4037107-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The ni_capture test reads rate * time frames into each channel buffer
and then compares rate * time bytes. A frame is sample_size bytes per
channel, so with S16_LE only the first half of each channel is checked.
If the second half is wrong the test still passes.

Compare rate * time * sample_size bytes per channel.

Fixes: 10b98a4db11a ("selftests: ALSA: Add test for the 'pcmtest' driver")
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: HyeongJun An &lt;sammiee5311@gmail.com&gt;
Link: https://patch.msgid.link/20261021112554.4037107-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests/alsa: Check the aloop PCM Slave controls for a matching playback</title>
<updated>2026-10-21T12:56:00+00:00</updated>
<author>
<name>Henrik Enquist</name>
<email>henrik.enquist@gmail.com</email>
</author>
<published>2026-10-21T07:46:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=d0bee96f846ff56e0ab93030b5f187550b882977'/>
<id>d0bee96f846ff56e0ab93030b5f187550b882977</id>
<content type='text'>
Add a test that starts a playback with the same parameters as a running
capture, and checks that the capture keeps running and that the
"PCM Slave" controls report the playback's parameters, with a value
event for each control that changed. Before the previous patch, the
controls keep the parameters of the earlier stream and the test fails.

Signed-off-by: Henrik Enquist &lt;henrik.enquist@gmail.com&gt;
Link: https://patch.msgid.link/20261021-aloop-slave-controls-v1-2-62297727177f@gmail.com
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a test that starts a playback with the same parameters as a running
capture, and checks that the capture keeps running and that the
"PCM Slave" controls report the playback's parameters, with a value
event for each control that changed. Before the previous patch, the
controls keep the parameters of the earlier stream and the test fails.

Signed-off-by: Henrik Enquist &lt;henrik.enquist@gmail.com&gt;
Link: https://patch.msgid.link/20261021-aloop-slave-controls-v1-2-62297727177f@gmail.com
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: ALSA: pcmtest: Make room for the longest fill pattern</title>
<updated>2026-10-21T09:36:10+00:00</updated>
<author>
<name>HyeongJun An</name>
<email>sammiee5311@gmail.com</email>
</author>
<published>2026-10-20T10:18:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c338e77291d6b1b6aee6d45b3cc523f97199a011'/>
<id>c338e77291d6b1b6aee6d45b3cc523f97199a011</id>
<content type='text'>
The driver accepts fill patterns of up to 4096 bytes, as pcmtest.rst
documents. The test reads each pattern into a 1024-byte buffer, using
the length the driver reports. So a pattern longer than 1024 bytes
overflows the buffer into the next pattern and past the array.

Size the buffer to the driver's maximum.

Fixes: 10b98a4db11a ("selftests: ALSA: Add test for the 'pcmtest' driver")
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: HyeongJun An &lt;sammiee5311@gmail.com&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
Link: https://patch.msgid.link/7cbbcef84d2c14a2f0ec0ad2ba55c6ba0a15a8d8.1792390197.git.sammiee5311@gmail.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The driver accepts fill patterns of up to 4096 bytes, as pcmtest.rst
documents. The test reads each pattern into a 1024-byte buffer, using
the length the driver reports. So a pattern longer than 1024 bytes
overflows the buffer into the next pattern and past the array.

Size the buffer to the driver's maximum.

Fixes: 10b98a4db11a ("selftests: ALSA: Add test for the 'pcmtest' driver")
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: HyeongJun An &lt;sammiee5311@gmail.com&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
Link: https://patch.msgid.link/7cbbcef84d2c14a2f0ec0ad2ba55c6ba0a15a8d8.1792390197.git.sammiee5311@gmail.com
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: ALSA: pcmtest: Check the frame count of each transfer</title>
<updated>2026-10-21T09:36:10+00:00</updated>
<author>
<name>HyeongJun An</name>
<email>sammiee5311@gmail.com</email>
</author>
<published>2026-10-20T10:18:36+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=317f2ddb6662fca8954e381a1bc632667872c4a3'/>
<id>317f2ddb6662fca8954e381a1bc632667872c4a3</id>
<content type='text'>
The tests keep the result of snd_pcm_writei(), snd_pcm_readi() and
their non-interleaved forms in a size_t. A size_t is never negative, so
ASSERT_GE(res, 0) always passes.

The capture tests still catch a failed read when they compare the data.
But the playback tests do not. The driver sets pc_test to 1 when it saw
no corrupted data, and that is also true when it saw no data at all. So
a playback test passes even when every write fails.

Store the result as snd_pcm_sframes_t and check that the whole request
was transferred. The calls block, so a short count means an error.

Fixes: 10b98a4db11a ("selftests: ALSA: Add test for the 'pcmtest' driver")
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: HyeongJun An &lt;sammiee5311@gmail.com&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
Link: https://patch.msgid.link/6f16e2a01f18c0ea069164bab31999182ff6d49e.1792390197.git.sammiee5311@gmail.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The tests keep the result of snd_pcm_writei(), snd_pcm_readi() and
their non-interleaved forms in a size_t. A size_t is never negative, so
ASSERT_GE(res, 0) always passes.

The capture tests still catch a failed read when they compare the data.
But the playback tests do not. The driver sets pc_test to 1 when it saw
no corrupted data, and that is also true when it saw no data at all. So
a playback test passes even when every write fails.

Store the result as snd_pcm_sframes_t and check that the whole request
was transferred. The calls block, so a short count means an error.

Fixes: 10b98a4db11a ("selftests: ALSA: Add test for the 'pcmtest' driver")
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: HyeongJun An &lt;sammiee5311@gmail.com&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
Link: https://patch.msgid.link/6f16e2a01f18c0ea069164bab31999182ff6d49e.1792390197.git.sammiee5311@gmail.com
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests/alsa: Add a test for snd-aloop notify mode</title>
<updated>2026-10-04T18:35:52+00:00</updated>
<author>
<name>Henrik Enquist</name>
<email>henrik.enquist@gmail.com</email>
</author>
<published>2026-10-03T13:26:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=48eb74077beb6f2310b817ab2b033c0352cd1e49'/>
<id>48eb74077beb6f2310b817ab2b033c0352cd1e49</id>
<content type='text'>
Add a test for the hw constraints between the playback and capture
devices of an snd-aloop cable, and for the "PCM Slave" controls that
report the playback side's parameters to the capture application.

With notify disabled, a playback opened while a capture is set up must
be pinned to the capture's parameters. With notify enabled, it may pick
others. Starting it stops the running capture, and the "PCM Slave
Format", "Rate", "Channels" and "Access Mode" controls report the new
parameters, each with a value event. A capture opened second is pinned
to the playback either way.

The tests only check hw_refine results, stream states and control
values, so they don't depend on timing. They skip if snd-aloop isn't
loaded or the devices are in use.

Without "ALSA: aloop: Don't constrain playback params in notify mode",
the two notify mode tests fail.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Henrik Enquist &lt;henrik.enquist@gmail.com&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
Link: https://patch.msgid.link/20261003-aloop-notify-fix-v1-2-ba5dfb831bf5@gmail.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a test for the hw constraints between the playback and capture
devices of an snd-aloop cable, and for the "PCM Slave" controls that
report the playback side's parameters to the capture application.

With notify disabled, a playback opened while a capture is set up must
be pinned to the capture's parameters. With notify enabled, it may pick
others. Starting it stops the running capture, and the "PCM Slave
Format", "Rate", "Channels" and "Access Mode" controls report the new
parameters, each with a value event. A capture opened second is pinned
to the playback either way.

The tests only check hw_refine results, stream states and control
values, so they don't depend on timing. They skip if snd-aloop isn't
loaded or the devices are in use.

Without "ALSA: aloop: Don't constrain playback params in notify mode",
the two notify mode tests fail.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Henrik Enquist &lt;henrik.enquist@gmail.com&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
Link: https://patch.msgid.link/20261003-aloop-notify-fix-v1-2-ba5dfb831bf5@gmail.com
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests/alsa: Check that a write does not silently change other controls</title>
<updated>2026-10-04T18:22:11+00:00</updated>
<author>
<name>HyeongJun An</name>
<email>sammiee5311@gmail.com</email>
</author>
<published>2026-09-30T11:15:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=990385ba98336224bc000c7cf7b51c2fa442c780'/>
<id>990385ba98336224bc000c7cf7b51c2fa442c780</id>
<content type='text'>
A control whose register mask is wider than its field clobbers the
field next to it. No event is sent for the neighbour, so nothing
notices. The es8316 bug fixed in
commit 6c1bb4031729 ("ASoC: codec: es8316: "DAC Soft Ramp Rate" is just a 2 bit control")
was one.

Add a test that writes each control's minimum and then its maximum.
After each write it compares the other controls on the card with a
snapshot. The minimum clears the field and the maximum sets its top
bit, which is where a mask one bit too wide lands. Some drivers link
controls on purpose, so a change announced with a value event is only
logged. A silent one fails.

On an HDA HDMI codec and snd-dummy, 39 controls in all, it reports
nothing. A snd-dummy copy with an injected silent overlap fails, and
the same overlap announced with a value event passes.

Suggested-by: Mark Brown &lt;broonie@kernel.org&gt;
Link: https://lore.kernel.org/all/0fefbfe1-021b-46b2-8945-15956e75e37f@sirena.org.uk/
Signed-off-by: HyeongJun An &lt;sammiee5311@gmail.com&gt;
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
Link: https://patch.msgid.link/20260930111534.3782264-3-sammiee5311@gmail.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
A control whose register mask is wider than its field clobbers the
field next to it. No event is sent for the neighbour, so nothing
notices. The es8316 bug fixed in
commit 6c1bb4031729 ("ASoC: codec: es8316: "DAC Soft Ramp Rate" is just a 2 bit control")
was one.

Add a test that writes each control's minimum and then its maximum.
After each write it compares the other controls on the card with a
snapshot. The minimum clears the field and the maximum sets its top
bit, which is where a mask one bit too wide lands. Some drivers link
controls on purpose, so a change announced with a value event is only
logged. A silent one fails.

On an HDA HDMI codec and snd-dummy, 39 controls in all, it reports
nothing. A snd-dummy copy with an injected silent overlap fails, and
the same overlap announced with a value event passes.

Suggested-by: Mark Brown &lt;broonie@kernel.org&gt;
Link: https://lore.kernel.org/all/0fefbfe1-021b-46b2-8945-15956e75e37f@sirena.org.uk/
Signed-off-by: HyeongJun An &lt;sammiee5311@gmail.com&gt;
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
Link: https://patch.msgid.link/20260930111534.3782264-3-sammiee5311@gmail.com
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests/alsa: Do not take another control's event as our own</title>
<updated>2026-10-04T18:22:11+00:00</updated>
<author>
<name>HyeongJun An</name>
<email>sammiee5311@gmail.com</email>
</author>
<published>2026-09-30T11:15:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c9b0768669976a1beb0a1537b4257bd6b76dfbac'/>
<id>c9b0768669976a1beb0a1537b4257bd6b76dfbac</id>
<content type='text'>
The wait_for_event() skips an event for a different control with a
continue inside its do-while loop. But continue goes straight to the
loop condition, and that tests the mask of the event just skipped. So
a value event for another control ends the wait as if it were ours.

A driver that notifies a second control from its put() queues that
event first. The core only sends ours once put() returns. So the wait
returns early and leaves ours in the queue. The next test then
reports it as spurious. And event_missing passes for a control whose
put() said nothing changed, as long as it notified a neighbour.

To fix this, clear the mask before skipping the event.

Fixes: b1446bda5645 ("kselftest: alsa: Check for event generation when we write to controls")
Signed-off-by: HyeongJun An &lt;sammiee5311@gmail.com&gt;
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
Link: https://patch.msgid.link/20260930111534.3782264-2-sammiee5311@gmail.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The wait_for_event() skips an event for a different control with a
continue inside its do-while loop. But continue goes straight to the
loop condition, and that tests the mask of the event just skipped. So
a value event for another control ends the wait as if it were ours.

A driver that notifies a second control from its put() queues that
event first. The core only sends ours once put() returns. So the wait
returns early and leaves ours in the queue. The next test then
reports it as spurious. And event_missing passes for a control whose
put() said nothing changed, as long as it notified a neighbour.

To fix this, clear the mask before skipping the event.

Fixes: b1446bda5645 ("kselftest: alsa: Check for event generation when we write to controls")
Signed-off-by: HyeongJun An &lt;sammiee5311@gmail.com&gt;
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
Link: https://patch.msgid.link/20260930111534.3782264-2-sammiee5311@gmail.com
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'for-linus' into for-next</title>
<updated>2026-09-28T12:44:10+00:00</updated>
<author>
<name>Takashi Iwai</name>
<email>tiwai@suse.de</email>
</author>
<published>2026-09-28T12:44:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=767b90004dd2952bcefb2570a494e253b9a3da69'/>
<id>767b90004dd2952bcefb2570a494e253b9a3da69</id>
<content type='text'>
Pull 7.3 devel branch for applying the further HD-audio quirks more
cleanly.

Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull 7.3 devel branch for applying the further HD-audio quirks more
cleanly.

Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: ALSA: Skip timer tests when device is unavailable</title>
<updated>2026-09-28T12:21:50+00:00</updated>
<author>
<name>Alireza Feyzabadi Farahani</name>
<email>arfa79lg@gmail.com</email>
</author>
<published>2026-09-27T06:44:30+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=3e9c6464dadd52334abc22bc089cc5307d46314a'/>
<id>3e9c6464dadd52334abc22bc089cc5307d46314a</id>
<content type='text'>
When CONFIG_SND is disabled, opening /dev/snd/timer fails and the
userspace timer tests report failures even though the test environment
does not support ALSA timers.

Skip the affected tests when opening the timer device fails because the
device is unavailable. Continue to report unexpected open failures as
test failures.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218479
Signed-off-by: Alireza Feyzabadi Farahani &lt;arfa79lg@gmail.com&gt;
Reviewed-by: Mark Brown &lt;broonie@kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
Link: https://patch.msgid.link/20260927064430.2112688-1-arfa79lg@gmail.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When CONFIG_SND is disabled, opening /dev/snd/timer fails and the
userspace timer tests report failures even though the test environment
does not support ALSA timers.

Skip the affected tests when opening the timer device fails because the
device is unavailable. Continue to report unexpected open failures as
test failures.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218479
Signed-off-by: Alireza Feyzabadi Farahani &lt;arfa79lg@gmail.com&gt;
Reviewed-by: Mark Brown &lt;broonie@kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
Link: https://patch.msgid.link/20260927064430.2112688-1-arfa79lg@gmail.com
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests/alsa: Test writes to IEC958 controls</title>
<updated>2026-09-12T12:19:17+00:00</updated>
<author>
<name>HyeongJun An</name>
<email>sammiee5311@gmail.com</email>
</author>
<published>2026-09-12T02:54:30+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=e0fb2b8ac3c6a9e9ce7a098c6dd9272eb4ec6848'/>
<id>e0fb2b8ac3c6a9e9ce7a098c6dd9272eb4ec6848</id>
<content type='text'>
Nothing checks that the put() callback of an IEC958 control reports a
change, because write_valid skips these controls.

Where the device publishes a mask, toggle every bit in it and check each
write.  A bit the mask advertises that does not stick fails the test, the
way a rejected value fails for the other control types.

Where none is found, keep the old single guess at the non audio bit,
which the device is free to ignore, so only the notification can be
counted against it.  That path writes without checking so drop_events()
clears what those writes leave behind.

On an HDA card with four HDMI PCMs the Con Mask is 0f ff, so each control
walks eleven bits instead of one and all eleven stick:

  -# Totals: pass:212 fail:5 xfail:0 xpass:0 skip:56 error:0
  +# Totals: pass:216 fail:5 xfail:0 xpass:0 skip:52 error:0

A driver whose put() never reports a change still shows up as
event_missing.  hdmi-codec and img-spdif-out store every byte and return
0, so boards using them report one event_missing per walked bit, and
hdmi-codec advertises the whole block so that is 191 of them.  A driver
whose mask claims more than its put() keeps now fails write_valid
outright: au88x0 and ice1712 on Delta 1010 and Mediastation advertise
bytes they never store, cs46xx, oxygen and ice1724 advertise bits their
put() drops, and the RME cards regenerate the whole emphasis field from
one bit so the rest of it never reads back.  None of that hardware was
to hand, the paths were read rather than run.

write_invalid stays a skip.  Every bit pattern is a valid channel status.

Signed-off-by: HyeongJun An &lt;sammiee5311@gmail.com&gt;
Assisted-by: Claude:claude-opus-5
Reviewed-by: Mark Brown &lt;broonie@kernel.org&gt;
Link: https://patch.msgid.link/20260912025430.2102149-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Nothing checks that the put() callback of an IEC958 control reports a
change, because write_valid skips these controls.

Where the device publishes a mask, toggle every bit in it and check each
write.  A bit the mask advertises that does not stick fails the test, the
way a rejected value fails for the other control types.

Where none is found, keep the old single guess at the non audio bit,
which the device is free to ignore, so only the notification can be
counted against it.  That path writes without checking so drop_events()
clears what those writes leave behind.

On an HDA card with four HDMI PCMs the Con Mask is 0f ff, so each control
walks eleven bits instead of one and all eleven stick:

  -# Totals: pass:212 fail:5 xfail:0 xpass:0 skip:56 error:0
  +# Totals: pass:216 fail:5 xfail:0 xpass:0 skip:52 error:0

A driver whose put() never reports a change still shows up as
event_missing.  hdmi-codec and img-spdif-out store every byte and return
0, so boards using them report one event_missing per walked bit, and
hdmi-codec advertises the whole block so that is 191 of them.  A driver
whose mask claims more than its put() keeps now fails write_valid
outright: au88x0 and ice1712 on Delta 1010 and Mediastation advertise
bytes they never store, cs46xx, oxygen and ice1724 advertise bits their
put() drops, and the RME cards regenerate the whole emphasis field from
one bit so the rest of it never reads back.  None of that hardware was
to hand, the paths were read rather than run.

write_invalid stays a skip.  Every bit pattern is a valid channel status.

Signed-off-by: HyeongJun An &lt;sammiee5311@gmail.com&gt;
Assisted-by: Claude:claude-opus-5
Reviewed-by: Mark Brown &lt;broonie@kernel.org&gt;
Link: https://patch.msgid.link/20260912025430.2102149-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
</feed>
