Patch fixes uninitialized variable warning in bad_accesses test
which causes the selftests build to fail in older distibutions

bad_accesses.c: In function ‘bad_access’:
bad_accesses.c:52:9: error: ‘x’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
   printf("Bad - no SEGV! (%c)\n", x);
         ^
cc1: all warnings being treated as errors

Signed-off-by: Harish <harish@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201201092403.238182-1-harish@linux.ibm.com

I did an in-place build of the self-tests and found that it left
the tree dirty.

Add missed test binaries to .gitignore

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201201144427.1228745-1-dja@axtens.net

Merge our fixes branch, in particular to bring in the changes for the
entry/uaccess flush.

For simplicity in backporting, the original entry_flush test contained
a lot of duplicated code from the rfi_flush test. De-duplicate that code.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Add a test modelled on the RFI flush test which counts the number
of L1D misses doing a simple syscall with the entry flush on and off.

For simplicity of backporting, this test duplicates a lot of code from
rfi_flush. We clean that up in the next patch.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We are about to add an entry flush. The rfi (exit) flush test measures
the number of L1D flushes over a syscall with the RFI flush enabled and
disabled. But if the entry flush is also enabled, the effect of enabling
and disabling the RFI flush is masked.

If there is a debugfs entry for the entry flush, disable it during the RFI
flush and restore it later.

Reported-by: Spoorthy S <spoorts2@in.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The eeh-basic test got its own 60 seconds timeout (defined in commit
414f50434aa2 "selftests/eeh: Bump EEH wait time to 60s") per breakable
device.

And we have discovered that the number of breakable devices varies
on different hardware. The device recovery time ranges from 0 to 35
seconds. In our test pool it will take about 30 seconds to run on a
Power8 system that with 5 breakable devices, 60 seconds to run on a
Power9 system that with 4 breakable devices.

Extend the timeout setting in the kselftest framework to 5 minutes
to give it a chance to finish.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201023024539.9512-1-po-hsu.lin@canonical.com

Pull powerpc fixes from Michael Ellerman:

 - A fix for undetected data corruption on Power9 Nimbus <= DD2.1 in the
   emulation of VSX loads. The affected CPUs were not widely available.

 - Two fixes for machine check handling in guests under PowerVM.

 - A fix for our recent changes to SMP setup, when
   CONFIG_CPUMASK_OFFSTACK=y.

 - Three fixes for races in the handling of some of our powernv sysfs
   attributes.

 - One change to remove TM from the set of Power10 CPU features.

 - A couple of other minor fixes.

Thanks to: Aneesh Kumar K.V, Christophe Leroy, Ganesh Goudar, Jordan
Niethe, Mahesh Salgaonkar, Michael Neuling, Oliver O'Halloran, Qian Cai,
Srikar Dronamraju, Vasant Hegde.

* tag 'powerpc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries: Avoid using addr_to_pfn in real mode
  powerpc/uaccess: Don't use "m<>" constraint with GCC 4.9
  powerpc/eeh: Fix eeh_dev_check_failure() for PE#0
  powerpc/64s: Remove TM from Power10 features
  selftests/powerpc: Make alignment handler test P9N DD2.1 vector CI load workaround
  powerpc: Fix undetected data corruption with P9N DD2.1 VSX CI load emulation
  powerpc/powernv/dump: Handle multiple writes to ack attribute
  powerpc/powernv/dump: Fix race while processing OPAL dump
  powerpc/smp: Use GFP_ATOMIC while allocating tmp mask
  powerpc/smp: Remove unnecessary variable
  powerpc/mce: Avoid nmi_enter/exit in real mode on pseries hash
  powerpc/opal_elog: Handle multiple writes to ack attribute

alignment_handler currently only tests the unaligned cases but it can
also be useful for testing the workaround for the P9N DD2.1 vector CI
load issue fixed by p9_hmi_special_emu(). This workaround was
introduced in 5080332c2c89 ("powerpc/64s: Add workaround for P9 vector
CI load issue").

This changes the loop to start from offset 0 rather than 1 so that we
test the kernel emulation in p9_hmi_special_emu().

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201013043741.743413-2-mikey@neuling.org

Pull powerpc updates from Michael Ellerman:

 - A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting
   it for powerpc, as well as a related fix for sparc.

 - Remove support for PowerPC 601.

 - Some fixes for watchpoints & addition of a new ptrace flag for
   detecting ISA v3.1 (Power10) watchpoint features.

 - A fix for kernels using 4K pages and the hash MMU on bare metal
   Power9 systems with > 16TB of RAM, or RAM on the 2nd node.

 - A basic idle driver for shallow stop states on Power10.

 - Tweaks to our sched domains code to better inform the scheduler about
   the hardware topology on Power9/10, where two SMT4 cores can be
   presented by firmware as an SMT8 core.

 - A series doing further reworks & cleanups of our EEH code.

 - Addition of a filter for RTAS (firmware) calls done via sys_rtas(),
   to prevent root from overwriting kernel memory.

 - Other smaller features, fixes & cleanups.

Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe
Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn
Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero,
Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad
Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca
Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas
Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro
Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang
Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha,
Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.

* tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits)
  Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed"
  selftests/powerpc: Fix eeh-basic.sh exit codes
  cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
  powerpc/time: Make get_tb() common to PPC32 and PPC64
  powerpc/time: Make get_tbl() common to PPC32 and PPC64
  powerpc/time: Remove get_tbu()
  powerpc/time: Avoid using get_tbl() and get_tbu() internally
  powerpc/time: Make mftb() common to PPC32 and PPC64
  powerpc/time: Rename mftbl() to mftb()
  powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S
  powerpc/32s: Rename head_32.S to head_book3s_32.S
  powerpc/32s: Setup the early hash table at all time.
  powerpc/time: Remove ifdef in get_dec() and set_dec()
  powerpc: Remove get_tb_or_rtc()
  powerpc: Remove __USE_RTC()
  powerpc: Tidy up a bit after removal of PowerPC 601.
  powerpc: Remove support for PowerPC 601
  powerpc: Remove PowerPC 601
  powerpc: Drop SYNC_601() ISYNC_601() and SYNC()
  powerpc: Remove CONFIG_PPC601_SYNC_FIX
  ...