linux-toradex.git/tools/testing/selftests/sysctl, branch v5.12-rc8

Merge tag 'linux-kselftest-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

2020-06-09T17:03:12+00:00

Pull kselftest updates from Shuah Khan:
 "This consists of:

   - Several fixes from Masami Hiramatsu to improve coverage for lib and
     sysctl tests.

   - Clean up to vdso test and a new test for getcpu() from Mark Brown.

   - Add new gen_tar selftests Makefile target generate selftest package
     running "make gen_tar" in selftests directory from Veronika
     Kabatova.

   - Other miscellaneous fixes to timens, exec, tpm2 tests"

* tag 'linux-kselftest-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/sysctl: Make sysctl test driver as a module
  selftests/sysctl: Fix to load test_sysctl module
  lib: Make test_sysctl initialized as module
  lib: Make prime number generator independently selectable
  selftests/ftrace: Return unsupported if no error_log file
  selftests/ftrace: Use printf for backslash included command
  selftests/timens: handle a case when alarm clocks are not supported
  Kernel selftests: Add check if TPM devices are supported
  selftests: vdso: Add a selftest for vDSO getcpu()
  selftests: vdso: Use a header file to prototype parse_vdso API
  selftests: vdso: Rename vdso_test to vdso_test_gettimeofday
  selftests/exec: Verify execve of non-regular files fail
  selftests: introduce gen_tar Makefile target

lib/test_sysctl: support testing of sysctl. boot parameter

2020-06-08T18:05:56+00:00

Testing is done by a new parameter debug.test_sysctl.boot_int which
defaults to 0 and it's expected that the tester passes a boot parameter
that sets it to 1.  The test checks if it's set to 1.

To distinguish true failure from parameter not being set, the test
checks /proc/cmdline for the expected parameter, and whether test_sysctl
is built-in and not a module.

[vbabka@suse.cz: skip the new test if boot_int sysctl is not present]
  Link: http://lkml.kernel.org/r/305af605-1e60-cf84-fada-6ce1ca37c102@suse.cz

Signed-off-by: Vlastimil Babka 
Signed-off-by: Andrew Morton 
Cc: Alexey Dobriyan 
Cc: Christian Brauner 
Cc: David Rientjes 
Cc: "Eric W . Biederman" 
Cc: Greg Kroah-Hartman 
Cc: "Guilherme G . Piccoli" 
Cc: Iurii Zaikin 
Cc: Ivan Teterevkov 
Cc: Kees Cook 
Cc: Luis Chamberlain 
Cc: Masami Hiramatsu 
Cc: Matthew Wilcox 
Cc: Michal Hocko 
Cc: Michal Hocko 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20200427180433.7029-6-vbabka@suse.cz
Signed-off-by: Linus Torvalds

tools/testing/selftests/sysctl/sysctl.sh: support CONFIG_TEST_SYSCTL=y

2020-06-08T18:05:56+00:00

The testing script recommends CONFIG_TEST_SYSCTL=y, but actually only
works with CONFIG_TEST_SYSCTL=m.  Testing of sysctl setting via boot
param however requires the test to be built-in, so make sure the test
script supports it.

Signed-off-by: Vlastimil Babka 
Signed-off-by: Andrew Morton 
Acked-by: Luis Chamberlain 
Cc: Alexey Dobriyan 
Cc: Christian Brauner 
Cc: David Rientjes 
Cc: "Eric W . Biederman" 
Cc: Greg Kroah-Hartman 
Cc: "Guilherme G . Piccoli" 
Cc: Iurii Zaikin 
Cc: Ivan Teterevkov 
Cc: Kees Cook 
Cc: Masami Hiramatsu 
Cc: Matthew Wilcox 
Cc: Michal Hocko 
Cc: Michal Hocko 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20200427180433.7029-5-vbabka@suse.cz
Signed-off-by: Linus Torvalds

selftests/sysctl: Make sysctl test driver as a module

2020-06-02T16:27:02+00:00

Fix config file to require CONFIG_TEST_SYSCTL=m instead of y
because this driver introduces a test sysctl interfaces which
are normally not used, and only used for the selftest.

Signed-off-by: Masami Hiramatsu 
Reviewed-by: Kees Cook 
Reviewed-by: Luis Chamberlain 
Signed-off-by: Shuah Khan

selftests/sysctl: Fix to load test_sysctl module

2020-06-02T16:26:46+00:00

Fix to load test_sysctl.ko module correctly.

sysctl.sh checks whether the test module is embedded (or loaded
already) or not at first, and if not, it returns skip error
instead of trying modprobe. Thus, there is no chance to load the
test_sysctl test module.

Instead, this removes that module embedded check and returns
skip error only if it ensures that there is no embedded test
module *and* no loadable test module.

This also avoid referring config file since that is not
installed.

Signed-off-by: Masami Hiramatsu 
Reviewed-by: Kees Cook 
Reviewed-by: Luis Chamberlain 
Signed-off-by: Shuah Khan

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

tools/testing/selftests/sysctl/sysctl.sh: add proc_do_large_bitmap() test case

2019-05-15T02:52:51+00:00

The kernel has only two users of proc_do_large_bitmap(), the kernel CPU
watchdog, and the ip_local_reserved_ports.  Refer to watchdog_cpumask
and ip_local_reserved_ports in Documentation for further details on
these.  When you input a large buffer into these, when it is larger than
PAGE_SIZE- 1, the input data gets misparsed, and the user get
incorrectly informed that the desired input value was set.  This commit
implements a test which mimics and exploits that use case, it uses a
bitmap size, as in the watchdog case.  The bitmap is used to test the
bitmap proc handler, proc_do_large_bitmap().

The next commit fixes this issue.

[akpm@linux-foundation.org: move proc_do_large_bitmap() export to EOF]
[mcgrof@kernel.org: use new target description for backward compatibility]
[mcgrof@kernel.org: augment test number to 50, ran into issues with bash string comparisons when testing up to 50 cases.]
[mcgrof@kernel.org: introduce and use verify_diff_proc_file() to use diff]
[mcgrof@kernel.org: use mktemp for tmp file]
[mcgrof@kernel.org: merge shell test and C code]
[mcgrof@kernel.org: commit log love]
[mcgrof@kernel.org: export proc_do_large_bitmap() to allow for the test
[mcgrof@kernel.org: check for the return value when writing to the proc file]
Link: http://lkml.kernel.org/r/20190320222831.8243-6-mcgrof@kernel.org
Signed-off-by: Eric Sandeen 
Signed-off-by: Luis Chamberlain 
Acked-by: Kees Cook 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

tools/testing/selftests/sysctl/sysctl.sh: allow graceful use on older kernels

2019-05-15T02:52:51+00:00

On old kernels older new test knobs implemented on the test_sysctl
module may not be available.  This is expected, and the selftests test
scripts should be able to run without failures on older kernels.

Generalize a solution so that we test for each required test target file
for each test by requiring each test description to annotate their
respective test target file.  If the target file does not exist, we skip
the test gracefully.

Link: http://lkml.kernel.org/r/20190320222831.8243-5-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain 
Acked-by: Kees Cook 
Cc: Eric Sandeen 
Cc: Eric Sandeen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

tools/testing/selftests/sysctl/sysctl.sh: ignore diff output on verify_diff_w()

2019-05-15T02:52:51+00:00

When verify_diff_w() is used we care about the result, not the verbose
output, and although we use -q, that still gives us a chatty message
about if the files differ or not.  Since verify_diff_w() uses stdinput
the chatty message says whether or not "-" matches the target file, and
this just seems rather odd.  Better to just ignore that messsage all
together, what we really care about i sthe results, the return value and
we check for that.

Link: http://lkml.kernel.org/r/20190320222831.8243-4-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain 
Acked-by: Kees Cook 
Cc: Eric Sandeen 
Cc: Eric Sandeen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

tools/testing/selftests/sysctl/sysctl.sh: load module before testing for it

2019-05-15T02:52:51+00:00

Currently the test script checks for the existence of the sysctl test
module's directory path prior to loading it.  We must first try to load
the module prior to checking for that path.  This fixes the order for
the load / test.

Link: http://lkml.kernel.org/r/20190320222831.8243-3-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain 
Acked-by: Kees Cook 
Cc: Eric Sandeen 
Cc: Eric Sandeen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds