Every ublk test script sources test_common.sh from its own directory:

    . "$(cd "$(dirname "$0")" && pwd)"/test_common.sh

and test_generic_02/12 additionally run bpftrace against the scripts in
trace/. Neither test_common.sh nor trace/ is listed in TEST_FILES, so
"make install" does not copy them into the install directory and every
ublk test fails when run from there:

  ./test_generic_02.sh: line 4: .../kselftest_install/ublk/test_common.sh: No such file or directory
  ./test_generic_02.sh: line 8: _have_program: command not found

The bpftrace tests are affected even when bpftrace is installed: the
missing trace/*.bt makes bpftrace exit immediately, and the tests then
report a skip rather than a failure, which hides the problem.

Add both to TEST_FILES, matching how other selftests ship their sourced
helpers (see kexec/kexec_common_lib.sh and zram/zram_lib.sh).

Fixes: 6aecda00b7d1e1 ("selftests: ublk: add kernel selftests for ublk")
Fixes: 723977cab4c0fd ("selftests: ublk: add generic_01 for verifying sequential IO order")
Cc: stable@vger.kernel.org # v6.15+
Assisted-by: Kiro:claude-opus-5
Signed-off-by: Mahmoud Nagy Adam <mngyadam@amazon.de>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260909132602.68852-2-mngyadam@amazon.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add test_params_01.sh for SET_PARAMS. The test checks valid basic
parameters and several invalid parameter cases.

Also cover zoned parameters, including a non-power-of-2 zone size. This
case must fail in SET_PARAMS instead of being accepted and rejected later
when the device is started.

Signed-off-by: Yao Sang <sangyao@kylinos.cn>
Link: https://patch.msgid.link/20260814023226.354288-4-sangyao@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Batch AUTO_BUF_REG COMMIT must unregister the old auto_buf index before
storing the next one. Fixed per-tag indexing (A == B) masks bugs that
clear after overwriting io->buf.

Add kublk --rotate_auto_buf so each tag alternates between two sparse
buffer indices, and test_batch_04.sh to exercise that path. Without the
driver fix, the request ref stays stuck and I/O hangs; the test uses a
short timeout and kills the ublk daemon to recover. With the fix, a
small write completes quickly.

Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260730024050.1062354-1-yangxiuwei@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add test loop_08, which creates a ublk device with UBLK_F_IO_DESC_SIZE
enabled and io_desc_size set to 64. The test issues verified I/O to the
device using fio.

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://patch.msgid.link/20260803211441.2538144-8-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The end-to-end integrity ublk selftest test_integrity_02 requires a
relatively recent fio version to support I/O with integrity buffers. Add
a version test_integrity_03 that uses the block layer's auto integrity
path instead. The auto integrity code doesn't check the application tag,
and doesn't indicate the bad guard/ref tag (just returns EILSEQ). But
it's a good smoke-test of the ublk integrity code and provides coverage
of the auto integrity path as well.

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add --rdonly_shmem_buf option to kublk that registers shared memory
buffers with UBLK_SHMEM_BUF_READ_ONLY (read-only pinning without
FOLL_WRITE) and mmaps with PROT_READ only.

Add test_shmemzc_04.sh which exercises the new flag with a null target,
hugetlbfs buffer, and write workload. Write I/O works because the
server only reads from the shared buffer — the data flows from client
to kernel to the shared pages, and the server reads them out.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260331153207.3635125-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add test_shmemzc_03.sh which exercises shmem_zc through the full
filesystem stack: mkfs ext4 on the ublk device, mount it, then run
fio verify on a file inside the filesystem with --mem=mmaphuge.

Extend _mkfs_mount_test() to accept an optional command that runs
between mount and umount. The function cd's into the mount directory
so the command can use relative file paths. Existing callers that
pass only the device are unaffected.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260331153207.3635125-10-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add test_shmem_zc_02.sh which tests the UBLK_IO_F_SHMEM_ZC zero-copy
path on the loop target using a hugetlbfs shared buffer. Both kublk and
fio mmap the same hugetlbfs file with MAP_SHARED, sharing physical
pages. The kernel's PFN matching enables zero-copy — the loop target
reads/writes directly from the shared buffer to the backing file.

Uses standard fio --mem=mmaphuge:<path> (supported since fio 1.10),
no patched fio required.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260331153207.3635125-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add test_shmem_zc_01.sh which tests UBLK_IO_F_SHMEM_ZC on the null
target using a hugetlbfs shared buffer. Both kublk (--htlb) and fio
(--mem=mmaphuge:<path>) mmap the same hugetlbfs file with MAP_SHARED,
sharing physical pages. The kernel PFN match enables zero-copy I/O.

Uses standard fio --mem=mmaphuge:<path> (supported since fio 1.10),
no patched fio required.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260331153207.3635125-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Before the fix, teardown of a ublk server that was attempting to recover
a device, but died when it had submitted a nonempty proper subset of the
fetch commands to any queue would loop forever. Add a test to verify
that, after the fix, teardown completes. This is done by:

- Adding a new argument to the fault_inject target that causes it die
  after fetching a nonempty proper subset of the IOs to a queue
- Using that argument in a new test while trying to recover an
  already-created device
- Attempting to delete the ublk device at the end of the test; this
  hangs forever if teardown from the fault-injected ublk server never
  completed.

It was manually verified that the test passes with the fix and hangs
without it.

Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260405-cancel-v2-2-02d711e643c2@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>