linux-toradex.git/tools/testing, branch v5.7-rc2 Linux kernel for Apalis and Colibri modules Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2020-04-16T21:52:29+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-04-16T21:52:29+00:00 c8372665b4b96d6a818b2693dd49236d5f9c8bc2 Pull networking fixes from David Miller: 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel. 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet. 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing. 4) Adjust icmp6 message source address selection when routes have a preferred source address set, from Tim Stallard. 5) Be sure to validate HSR protocol version when creating new links, from Taehee Yoo. 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in non-initial namespaces, from Michael Weiß. 7) Missing release firmware call in mlx5, from Eran Ben Elisha. 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from Taehee Yoo. 9) Fix pause frame negotiation in marvell phy driver, from Clemens Gruber. 10) Record RX queue early enough in tun packet paths such that XDP programs will see the correct RX queue index, from Gilberto Bertin. 11) Fix double unlock in mptcp, from Florian Westphal. 12) Fix offset overflow in ARM bpf JIT, from Luke Nelson. 13) marvell10g needs to soft reset PHY when coming out of low power mode, from Russell King. 14) Fix MTU setting regression in stmmac for some chip types, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) amd-xgbe: Use __napi_schedule() in BH context mISDN: make dmril and dmrim static net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode tipc: fix incorrect increasing of link window Documentation: Fix tcp_challenge_ack_limit default value net: tulip: make early_486_chipsets static dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400 ipv6: remove redundant assignment to variable err net/rds: Use ERR_PTR for rds_message_alloc_sgs() net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge selftests/bpf: Check for correct program attach/detach in xdp_attach test libbpf: Fix type of old_fd in bpf_xdp_set_link_opts libbpf: Always specify expected_attach_type on program load if supported xsk: Add missing check on user supplied headroom size mac80211: fix channel switch trigger from unknown mesh peer mac80211: fix race in ieee80211_register_hw() net: marvell10g: soft-reset the PHY when coming out of low power net: marvell10g: report firmware version net/cxgb4: Check the return from t4_query_params properly ... 
Pull networking fixes from David Miller:

 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.

 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.

 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.

 4) Adjust icmp6 message source address selection when routes have a
    preferred source address set, from Tim Stallard.

 5) Be sure to validate HSR protocol version when creating new links,
    from Taehee Yoo.

 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
    non-initial namespaces, from Michael Weiß.

 7) Missing release firmware call in mlx5, from Eran Ben Elisha.

 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
    Taehee Yoo.

 9) Fix pause frame negotiation in marvell phy driver, from Clemens
    Gruber.

10) Record RX queue early enough in tun packet paths such that XDP
    programs will see the correct RX queue index, from Gilberto Bertin.

11) Fix double unlock in mptcp, from Florian Westphal.

12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.

13) marvell10g needs to soft reset PHY when coming out of low power
    mode, from Russell King.

14) Fix MTU setting regression in stmmac for some chip types, from
    Florian Fainelli.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
  amd-xgbe: Use __napi_schedule() in BH context
  mISDN: make dmril and dmrim static
  net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
  net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
  tipc: fix incorrect increasing of link window
  Documentation: Fix tcp_challenge_ack_limit default value
  net: tulip: make early_486_chipsets static
  dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
  ipv6: remove redundant assignment to variable err
  net/rds: Use ERR_PTR for rds_message_alloc_sgs()
  net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
  selftests/bpf: Check for correct program attach/detach in xdp_attach test
  libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
  libbpf: Always specify expected_attach_type on program load if supported
  xsk: Add missing check on user supplied headroom size
  mac80211: fix channel switch trigger from unknown mesh peer
  mac80211: fix race in ieee80211_register_hw()
  net: marvell10g: soft-reset the PHY when coming out of low power
  net: marvell10g: report firmware version
  net/cxgb4: Check the return from t4_query_params properly
  ...
selftests/bpf: Check for correct program attach/detach in xdp_attach test 2020-04-15T11:26:08+00:00 Toke Høiland-Jørgensen toke@redhat.com 2020-04-14T14:50:25+00:00 c6c111523d9e697bfb463870759825be5d6caff6 David Ahern noticed that there was a bug in the EXPECTED_FD code so programs did not get detached properly when that parameter was supplied. This case was not included in the xdp_attach tests; so let's add it to be sure that such a bug does not sneak back in down. Fixes: 87854a0b57b3 ("selftests/bpf: Add tests for attaching XDP programs") Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200414145025.182163-2-toke@redhat.com 
David Ahern noticed that there was a bug in the EXPECTED_FD code so
programs did not get detached properly when that parameter was supplied.
This case was not included in the xdp_attach tests; so let's add it to be
sure that such a bug does not sneak back in down.

Fixes: 87854a0b57b3 ("selftests/bpf: Add tests for attaching XDP programs")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200414145025.182163-2-toke@redhat.com
libbpf: Always specify expected_attach_type on program load if supported 2020-04-15T11:22:43+00:00 Andrii Nakryiko andriin@fb.com 2020-04-14T18:26:45+00:00 25498a1969bf3687c29c29bbac92821d7a0f8b4a For some types of BPF programs that utilize expected_attach_type, libbpf won't set load_attr.expected_attach_type, even if expected_attach_type is known from section definition. This was done to preserve backwards compatibility with old kernels that didn't recognize expected_attach_type attribute yet (which was added in 5e43f899b03a ("bpf: Check attach type at prog load time"). But this is problematic for some BPF programs that utilize newer features that require kernel to know specific expected_attach_type (e.g., extended set of return codes for cgroup_skb/egress programs). This patch makes libbpf specify expected_attach_type by default, but also detect support for this field in kernel and not set it during program load. This allows to have a good metadata for bpf_program (e.g., bpf_program__get_extected_attach_type()), but still work with old kernels (for cases where it can work at all). Additionally, due to expected_attach_type being always set for recognized program types, bpf_program__attach_cgroup doesn't have to do extra checks to determine correct attach type, so remove that additional logic. Also adjust section_names selftest to account for this change. More detailed discussion can be found in [0]. [0] https://lore.kernel.org/bpf/20200412003604.GA15986@rdna-mbp.dhcp.thefacebook.com/ Fixes: 5cf1e9145630 ("bpf: cgroup inet skb programs can return 0 to 3") Fixes: 5e43f899b03a ("bpf: Check attach type at prog load time") Reported-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Link: https://lore.kernel.org/bpf/20200414182645.1368174-1-andriin@fb.com 
For some types of BPF programs that utilize expected_attach_type, libbpf won't
set load_attr.expected_attach_type, even if expected_attach_type is known from
section definition. This was done to preserve backwards compatibility with old
kernels that didn't recognize expected_attach_type attribute yet (which was
added in 5e43f899b03a ("bpf: Check attach type at prog load time"). But this
is problematic for some BPF programs that utilize newer features that require
kernel to know specific expected_attach_type (e.g., extended set of return
codes for cgroup_skb/egress programs).

This patch makes libbpf specify expected_attach_type by default, but also
detect support for this field in kernel and not set it during program load.
This allows to have a good metadata for bpf_program
(e.g., bpf_program__get_extected_attach_type()), but still work with old
kernels (for cases where it can work at all).

Additionally, due to expected_attach_type being always set for recognized
program types, bpf_program__attach_cgroup doesn't have to do extra checks to
determine correct attach type, so remove that additional logic.

Also adjust section_names selftest to account for this change.

More detailed discussion can be found in [0].

  [0] https://lore.kernel.org/bpf/20200412003604.GA15986@rdna-mbp.dhcp.thefacebook.com/

Fixes: 5cf1e9145630 ("bpf: cgroup inet skb programs can return 0 to 3")
Fixes: 5e43f899b03a ("bpf: Check attach type at prog load time")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20200414182645.1368174-1-andriin@fb.com
selftests/bpf: Validate frozen map contents stays frozen 2020-04-14T19:28:57+00:00 Andrii Nakryiko andriin@fb.com 2020-04-10T20:26:13+00:00 642c1654702731ab42a3be771bebbd6ef938f0dc Test that frozen and mmap()'ed BPF map can't be mprotect()'ed as writable or executable memory. Also validate that "downgrading" from writable to read-only doesn't screw up internal writable count accounting for the purposes of map freezing. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200410202613.3679837-2-andriin@fb.com 
Test that frozen and mmap()'ed BPF map can't be mprotect()'ed as writable or
executable memory. Also validate that "downgrading" from writable to read-only
doesn't screw up internal writable count accounting for the purposes of map
freezing.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200410202613.3679837-2-andriin@fb.com
selftests: kmod: test disabling module autoloading 2020-04-10T22:36:22+00:00 Eric Biggers ebiggers@google.com 2020-04-10T21:33:57+00:00 23756e551f35aaa9400a7e8a2660494115221801 Test that request_module() fails with -ENOENT when /proc/sys/kernel/modprobe contains (a) a nonexistent path, and (b) an empty path. Case (b) is a regression test for the patch "kmod: make request_module() return an error when autoloading is disabled". Tested with 'kmod.sh -t 0010 && kmod.sh -t 0011', and also simply with 'kmod.sh' to run all kmod tests. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: NeilBrown <neilb@suse.com> Link: http://lkml.kernel.org/r/20200312202552.241885-5-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Test that request_module() fails with -ENOENT when
/proc/sys/kernel/modprobe contains (a) a nonexistent path, and (b) an
empty path.

Case (b) is a regression test for the patch "kmod: make request_module()
return an error when autoloading is disabled".

Tested with 'kmod.sh -t 0010 && kmod.sh -t 0011', and also simply with
'kmod.sh' to run all kmod tests.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
selftests: kmod: fix handling test numbers above 9 2020-04-10T22:36:22+00:00 Eric Biggers ebiggers@google.com 2020-04-10T21:33:53+00:00 6d573a07528308eb77ec072c010819c359bebf6e get_test_count() and get_test_enabled() were broken for test numbers above 9 due to awk interpreting a field specification like '$0010' as octal rather than decimal. Fix it by stripping the leading zeroes. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: NeilBrown <neilb@suse.com> Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal.  Fix it by stripping the leading zeroes.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf 2020-04-10T00:39:22+00:00 David S. Miller davem@davemloft.net 2020-04-10T00:39:22+00:00 40fc7ad2c8863479f3db34f9a9283b4884cd0e90 Daniel Borkmann says: ==================== pull-request: bpf 2020-04-10 The following pull-request contains BPF updates for your *net* tree. We've added 13 non-merge commits during the last 7 day(s) which contain a total of 13 files changed, 137 insertions(+), 43 deletions(-). The main changes are: 1) JIT code emission fixes for riscv and arm32, from Luke Nelson and Xi Wang. 2) Disable vmlinux BTF info if GCC_PLUGIN_RANDSTRUCT is used, from Slava Bacherikov. 3) Fix oob write in AF_XDP when meta data is used, from Li RongQing. 4) Fix bpf_get_link_xdp_id() handling on single prog when flags are specified, from Andrey Ignatov. 5) Fix sk_assign() BPF helper for request sockets that can have sk_reuseport field uninitialized, from Joe Stringer. 6) Fix mprotect() test case for the BPF LSM, from KP Singh. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 
Daniel Borkmann says:

====================
pull-request: bpf 2020-04-10

The following pull-request contains BPF updates for your *net* tree.

We've added 13 non-merge commits during the last 7 day(s) which contain
a total of 13 files changed, 137 insertions(+), 43 deletions(-).

The main changes are:

1) JIT code emission fixes for riscv and arm32, from Luke Nelson and Xi Wang.

2) Disable vmlinux BTF info if GCC_PLUGIN_RANDSTRUCT is used, from Slava Bacherikov.

3) Fix oob write in AF_XDP when meta data is used, from Li RongQing.

4) Fix bpf_get_link_xdp_id() handling on single prog when flags are specified,
   from Andrey Ignatov.

5) Fix sk_assign() BPF helper for request sockets that can have sk_reuseport
   field uninitialized, from Joe Stringer.

6) Fix mprotect() test case for the BPF LSM, from KP Singh.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux 2020-04-09T18:01:42+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-04-09T18:01:42+00:00 e4da01d8333e500e15a674d75885a9dfcfd31e77 Pull more powerpc updates from Michael Ellerman: "The bulk of this is the series to make CONFIG_COMPAT user-selectable, it's been around for a long time but was blocked behind the syscall-in-C series. Plus there's also a few fixes and other minor things. Summary: - A fix for a crash in machine check handling on pseries (ie. guests) - A small series to make it possible to disable CONFIG_COMPAT, and turn it off by default for ppc64le where it's not used. - A few other miscellaneous fixes and small improvements. Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann, Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven, Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek, Nicholas Piggin, Stephen Boyd, Wen Xiong" * tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Always build the tm-poison test 64-bit powerpc: Improve ppc_save_regs() Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled" powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h> powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory powerpc/perf: split callchain.c by bitness powerpc/64: Make COMPAT user-selectable disabled on littleendian by default. powerpc/64: make buildable without CONFIG_COMPAT powerpc/perf: consolidate valid_user_sp -> invalid_user_sp powerpc/perf: consolidate read_user_stack_32 powerpc: move common register copy functions from signal_32.c to signal.c powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig powerpc/ps3: Remove an unneeded NULL check powerpc/ps3: Remove duplicate error message powerpc/powernv: Re-enable imc trace-mode in kernel powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events. powerpc/pseries: Fix MCE handling on pseries selftests/eeh: Skip ahci adapters powerpc/64s: Fix doorbell wakeup msgclr optimisation 
Pull more powerpc updates from Michael Ellerman:
 "The bulk of this is the series to make CONFIG_COMPAT user-selectable,
  it's been around for a long time but was blocked behind the
  syscall-in-C series.

  Plus there's also a few fixes and other minor things.

  Summary:

   - A fix for a crash in machine check handling on pseries (ie. guests)

   - A small series to make it possible to disable CONFIG_COMPAT, and
     turn it off by default for ppc64le where it's not used.

   - A few other miscellaneous fixes and small improvements.

  Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann,
  Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven,
  Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek,
  Nicholas Piggin, Stephen Boyd, Wen Xiong"

* tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Always build the tm-poison test 64-bit
  powerpc: Improve ppc_save_regs()
  Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
  powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
  powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory
  powerpc/perf: split callchain.c by bitness
  powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
  powerpc/64: make buildable without CONFIG_COMPAT
  powerpc/perf: consolidate valid_user_sp -> invalid_user_sp
  powerpc/perf: consolidate read_user_stack_32
  powerpc: move common register copy functions from signal_32.c to signal.c
  powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
  powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig
  powerpc/ps3: Remove an unneeded NULL check
  powerpc/ps3: Remove duplicate error message
  powerpc/powernv: Re-enable imc trace-mode in kernel
  powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events.
  powerpc/pseries: Fix MCE handling on pseries
  selftests/eeh: Skip ahci adapters
  powerpc/64s: Fix doorbell wakeup msgclr optimisation
Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm 2020-04-09T04:03:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-04-09T04:03:40+00:00 9b06860d7c1f1f4cb7d70f92e47dfa4a91bd5007 Pull libnvdimm and dax updates from Dan Williams: "There were multiple touches outside of drivers/nvdimm/ this round to add cross arch compatibility to the devm_memremap_pages() interface, enhance numa information for persistent memory ranges, and add a zero_page_range() dax operation. This cycle I switched from the patchwork api to Konstantin's b4 script for collecting tags (from x86, PowerPC, filesystem, and device-mapper folks), and everything looks to have gone ok there. This has all appeared in -next with no reported issues. Summary: - Add support for region alignment configuration and enforcement to fix compatibility across architectures and PowerPC page size configurations. - Introduce 'zero_page_range' as a dax operation. This facilitates filesystem-dax operation without a block-device. - Introduce phys_to_target_node() to facilitate drivers that want to know resulting numa node if a given reserved address range was onlined. - Advertise a persistence-domain for of_pmem and papr_scm. The persistence domain indicates where cpu-store cycles need to reach in the platform-memory subsystem before the platform will consider them power-fail protected. - Promote numa_map_to_online_node() to a cross-kernel generic facility. - Save x86 numa information to allow for node-id lookups for reserved memory ranges, deploy that capability for the e820-pmem driver. - Pick up some miscellaneous minor fixes, that missed v5.6-final, including a some smatch reports in the ioctl path and some unit test compilation fixups. - Fixup some flexible-array declarations" * tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits) dax: Move mandatory ->zero_page_range() check in alloc_dax() dax,iomap: Add helper dax_iomap_zero() to zero a range dax: Use new dax zero page method for zeroing a page dm,dax: Add dax zero_page_range operation s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver dax, pmem: Add a dax operation zero_page_range pmem: Add functions for reading/writing page to/from pmem libnvdimm: Update persistence domain value for of_pmem and papr_scm device tools/test/nvdimm: Fix out of tree build libnvdimm/region: Fix build error libnvdimm/region: Replace zero-length array with flexible-array member libnvdimm/label: Replace zero-length array with flexible-array member ACPI: NFIT: Replace zero-length array with flexible-array member libnvdimm/region: Introduce an 'align' attribute libnvdimm/region: Introduce NDD_LABELING libnvdimm/namespace: Enforce memremap_compat_align() libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid libnvdimm: Out of bounds read in __nd_ioctl() acpi/nfit: improve bounds checking for 'func' mm/memremap_pages: Introduce memremap_compat_align() ... 
Pull libnvdimm and dax updates from Dan Williams:
 "There were multiple touches outside of drivers/nvdimm/ this round to
  add cross arch compatibility to the devm_memremap_pages() interface,
  enhance numa information for persistent memory ranges, and add a
  zero_page_range() dax operation.

  This cycle I switched from the patchwork api to Konstantin's b4 script
  for collecting tags (from x86, PowerPC, filesystem, and device-mapper
  folks), and everything looks to have gone ok there. This has all
  appeared in -next with no reported issues.

  Summary:

   - Add support for region alignment configuration and enforcement to
     fix compatibility across architectures and PowerPC page size
     configurations.

   - Introduce 'zero_page_range' as a dax operation. This facilitates
     filesystem-dax operation without a block-device.

   - Introduce phys_to_target_node() to facilitate drivers that want to
     know resulting numa node if a given reserved address range was
     onlined.

   - Advertise a persistence-domain for of_pmem and papr_scm. The
     persistence domain indicates where cpu-store cycles need to reach
     in the platform-memory subsystem before the platform will consider
     them power-fail protected.

   - Promote numa_map_to_online_node() to a cross-kernel generic
     facility.

   - Save x86 numa information to allow for node-id lookups for reserved
     memory ranges, deploy that capability for the e820-pmem driver.

   - Pick up some miscellaneous minor fixes, that missed v5.6-final,
     including a some smatch reports in the ioctl path and some unit
     test compilation fixups.

   - Fixup some flexible-array declarations"

* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
  dax: Move mandatory ->zero_page_range() check in alloc_dax()
  dax,iomap: Add helper dax_iomap_zero() to zero a range
  dax: Use new dax zero page method for zeroing a page
  dm,dax: Add dax zero_page_range operation
  s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
  dax, pmem: Add a dax operation zero_page_range
  pmem: Add functions for reading/writing page to/from pmem
  libnvdimm: Update persistence domain value for of_pmem and papr_scm device
  tools/test/nvdimm: Fix out of tree build
  libnvdimm/region: Fix build error
  libnvdimm/region: Replace zero-length array with flexible-array member
  libnvdimm/label: Replace zero-length array with flexible-array member
  ACPI: NFIT: Replace zero-length array with flexible-array member
  libnvdimm/region: Introduce an 'align' attribute
  libnvdimm/region: Introduce NDD_LABELING
  libnvdimm/namespace: Enforce memremap_compat_align()
  libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
  libnvdimm: Out of bounds read in __nd_ioctl()
  acpi/nfit: improve bounds checking for 'func'
  mm/memremap_pages: Introduce memremap_compat_align()
  ...
tc-testing: remove duplicate code in tdc.py 2020-04-08T01:38:55+00:00 Roman Mashak mrv@mojatatu.com 2020-04-07T17:13:25+00:00 cb9533d1c683219bc982905046c05e24bfaf4996 In set_operation_mode() function remove duplicated check for args.list parameter, which is already done one line before. Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
In set_operation_mode() function remove duplicated check for args.list
parameter, which is already done one line before.

Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>