David writes:
  "Networking

   1) RXRPC receive path fixes from David Howells.

   2) Re-export __skb_recv_udp(), from Jiri Kosina.

   3) Fix refcounting in u32 classificer, from Al Viro.

   4) Userspace netlink ABI fixes from Eugene Syromiatnikov.

   5) Don't double iounmap on rmmod in ena driver, from Arthur
      Kiyanovski.

   6) Fix devlink string attribute handling, we must pull a copy into a
      kernel buffer if the lifetime extends past the netlink request.
      From Moshe Shemesh.

   7) Fix hangs in RDS, from Ka-Cheong Poon.

   8) Fix recursive locking lockdep warnings in tipc, from Ying Xue.

   9) Clear RX irq correctly in socionext, from Ilias Apalodimas.

   10) bcm_sf2 fixes from Florian Fainelli."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
  net: dsa: bcm_sf2: Call setup during switch resume
  net: dsa: bcm_sf2: Fix unbind ordering
  net: phy: sfp: remove sfp_mutex's definition
  r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips
  net: socionext: clear rx irq correctly
  net/mlx4_core: Fix warnings during boot on driverinit param set failures
  tipc: eliminate possible recursive locking detected by LOCKDEP
  selftests: udpgso_bench.sh explicitly requires bash
  selftests: rtnetlink.sh explicitly requires bash.
  qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface
  tipc: queue socket protocol error messages into socket receive buffer
  tipc: set link tolerance correctly in broadcast link
  net: ipv4: don't let PMTU updates increase route MTU
  net: ipv4: update fnhe_pmtu when first hop's MTU changes
  net/ipv6: stop leaking percpu memory in fib6 info
  rds: RDS (tcp) hangs on sendto() to unresponding address
  net: make skb_partial_csum_set() more robust against overflows
  devlink: Add helper function for safely copy string param
  devlink: Fix param cmode driverinit for string type
  devlink: Fix param set handling for string type
  ...

The udpgso_bench.sh script requires several bash-only features. This
may cause random failures if the default shell is not bash.
Address the above explicitly requiring bash as the script interpreter

Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

the script rtnetlink.sh requires a bash-only features (sleep with sub-second
precision). This may cause random test failure if the default shell is not
bash.
Address the above explicitly requiring bash as the script interpreter.

Fixes: 33b01b7b4f19 ("selftests: add rtnetlink test script")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ingo, a man of few words, writes:
  "perf fixes:

   misc perf tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf record: Use unmapped IP for inline callchain cursors
  perf python: Use -Wno-redundant-decls to build with PYTHON=python3
  perf report: Don't try to map ip to invalid map
  perf script python: Fix export-to-sqlite.py sample columns
  perf script python: Fix export-to-postgresql.py occasional failure

I wrote:
  "Char/Misc fixes for 4.19-rc7

   Here are 8 small fixes for some char/misc driver issues

   Included here are:
	- fpga driver fixes
	- thunderbolt bugfixes
	- firmware core revert/fix
	- hv core fix
	- hv tool fix

   All of these have been in linux-next with no reported issues."

* tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  thunderbolt: Initialize after IOMMUs
  thunderbolt: Do not handle ICM events after domain is stopped
  firmware: Always initialize the fw_priv list object
  docs: fpga: document fpga manager flags
  fpga: bridge: fix obvious function documentation error
  tools: hv: fcopy: set 'error' in case an unknown operation was requested
  fpga: do not access region struct after fpga_region_unregister
  Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect()

Ingo writes:
  "x86 fixes:

   Misc fixes:

    - fix various vDSO bugs: asm constraints and retpolines
    - add vDSO test units to make sure they never re-appear
    - fix UV platform TSC initialization bug
    - fix build warning on Clang"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Fix vDSO syscall fallback asm constraint regression
  x86/cpu/amd: Remove unnecessary parentheses
  x86/vdso: Only enable vDSO retpolines when enabled and supported
  x86/tsc: Fix UV TSC initialization
  x86/platform/uv: Provide is_early_uv_system()
  selftests/x86: Add clock_gettime() tests to test_vdso
  x86/vdso: Fix asm constraints on vDSO syscall fallbacks

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

- Fix the build on Clear Linux, coping with redundant declarations of
  function prototypes in python3 header files by adding
  -Wno-redundant-decls to build with PYTHON=python3 (Arnaldo Carvalho de Melo)

- Fixes for processing inline frames in backtraces using DWARF based
  unwinding (Milian Wolff)

- Cope with bad DWARF info for function names for inline frames,not
  trying to demangle this symbol. Problem reported with rust but
  reproduced as well with C++. Problem reported to the libbpf
  maintainers (Milian Wolff)

- Fix python export to postgresql and sqlite code (Adrian Hunter)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Paolo writes:
  "KVM changes for 4.19-rc7

   x86 and PPC bugfixes, mostly introduced in 4.19-rc1."

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: nVMX: fix entry with pending interrupt if APICv is enabled
  KVM: VMX: hide flexpriority from guest when disabled at the module level
  KVM: VMX: check for existence of secondary exec controls before accessing
  KVM: PPC: Book3S HV: Avoid crash from THP collapse during radix page fault
  KVM: x86: fix L1TF's MMIO GFN calculation
  tools/kvm_stat: cut down decimal places in update interval dialog
  KVM: nVMX: Fix emulation of VM_ENTRY_LOAD_BNDCFGS
  KVM: x86: Do not use kvm_x86_ops->mpx_supported() directly
  KVM: nVMX: Do not expose MPX VMX controls when guest MPX disabled
  KVM: x86: never trap MSR_KERNEL_GS_BASE

Only use the mapped IP to find inline frames, but keep using the
unmapped IP for the callchain cursor. This ensures we properly show the
unmapped IP when displaying a frame we received via the
dso__parse_addr_inlines API for a module which does not contain
sufficient debug symbols to show the srcline.

This is another follow-up to commit 19610184693c ("perf script: Show
virtual addresses instead of offsets").

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Fixes: 19610184693c ("perf script: Show virtual addresses instead of offsets")
Link: http://lkml.kernel.org/r/20180926135207.30263-2-milian.wolff@kdab.com
Link: http://lkml.kernel.org/r/20181002073949.3297-1-milian.wolff@kdab.com
[ Squashed a fix from Milian for a problem reported by Ravi, fixed up space damage ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When building in ClearLinux using 'make PYTHON=python3' with gcc 8.2.1
it fails with:

    GEN      /tmp/build/perf/python/perf.so
  In file included from /usr/include/python3.7m/Python.h:126,
                   from /git/linux/tools/perf/util/python.c:2:
  /usr/include/python3.7m/import.h:58:24: error: redundant redeclaration of ‘_PyImport_AddModuleObject’ [-Werror=redundant-decls]
   PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *, PyObject *);
                          ^~~~~~~~~~~~~~~~~~~~~~~~~
  /usr/include/python3.7m/import.h:47:24: note: previous declaration of ‘_PyImport_AddModuleObject’ was here
   PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *name,
                          ^~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors
  error: command 'gcc' failed with exit status 1

And indeed there is a redundant declaration in that Python.h file, one
with parameter names and the other without, so just add
-Wno-error=redundant-decls to the python setup instructions.

Now perf builds with gcc in ClearLinux with the following Dockerfile:

  # docker.io/acmel/linux-perf-tools-build-clearlinux:latest
  FROM docker.io/clearlinux:latest
  MAINTAINER Arnaldo Carvalho de Melo <acme@kernel.org>
  RUN swupd update && \
      swupd bundle-add sysadmin-basic-dev
  RUN mkdir -m 777 -p /git /tmp/build/perf /tmp/build/objtool /tmp/build/linux && \
      groupadd -r perfbuilder && \
      useradd -m -r -g perfbuilder perfbuilder && \
      chown -R perfbuilder.perfbuilder /tmp/build/ /git/
  USER perfbuilder
  COPY rx_and_build.sh /
  ENV EXTRA_MAKE_ARGS=PYTHON=python3
  ENTRYPOINT ["/rx_and_build.sh"]

Now to figure out why the build fails with clang, that is present in the
above container as detected by the rx_and_build.sh script:

  clang version 6.0.1 (tags/RELEASE_601/final)
  Target: x86_64-unknown-linux-gnu
  Thread model: posix
  InstalledDir: /usr/sbin
  make: Entering directory '/git/linux/tools/perf'
    BUILD:   Doing 'make -j4' parallel build
    HOSTCC   /tmp/build/perf/fixdep.o
    HOSTLD   /tmp/build/perf/fixdep-in.o
    LINK     /tmp/build/perf/fixdep

  Auto-detecting system features:
  ...                         dwarf: [ OFF ]
  ...            dwarf_getlocations: [ OFF ]
  ...                         glibc: [ OFF ]
  ...                          gtk2: [ OFF ]
  ...                      libaudit: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                      libslang: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ OFF ]
  ...                          zlib: [ OFF ]
  ...                          lzma: [ OFF ]
  ...                     get_cpuid: [ OFF ]
  ...                           bpf: [ OFF ]

  Makefile.config:331: *** No gnu/libc-version.h found, please install glibc-dev[el].  Stop.
  make[1]: *** [Makefile.perf:206: sub-make] Error 2
  make: *** [Makefile:70: all] Error 2
  make: Leaving directory '/git/linux/tools/perf'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-c3khb9ac86s00qxzjrueomme@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>