linux-toradex.git/tools, branch v4.4.111

usbip: fix usbip bind writing random string after command in match_busid

2018-01-02T19:33:26+00:00

commit 544c4605acc5ae4afe7dd5914147947db182f2fb upstream.

usbip bind writes commands followed by random string when writing to
match_busid attribute in sysfs, caused by using full variable size
instead of string length.

Signed-off-by: Juan Zea 
Acked-by: Shuah Khan 
Signed-off-by: Greg Kroah-Hartman

perf symbols: Fix symbols__fixup_end heuristic for corner cases

2017-12-20T09:04:56+00:00

[ Upstream commit e7ede72a6d40cb3a30c087142d79381ca8a31dab ]

The current symbols__fixup_end() heuristic for the last entry in the rb
tree is suboptimal as it leads to not being able to recognize the symbol
in the call graph in a couple of corner cases, for example:

 i) If the symbol has a start address (f.e. exposed via kallsyms)
    that is at a page boundary, then the roundup(curr->start, 4096)
    for the last entry will result in curr->start == curr->end with
    a symbol length of zero.

ii) If the symbol has a start address that is shortly before a page
    boundary, then also here, curr->end - curr->start will just be
    very few bytes, where it's unrealistic that we could perform a
    match against.

Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so
that we can catch such corner cases and have a better chance to find
that specific symbol. It's still just best effort as the real end of the
symbol is unknown to us (and could even be at a larger offset than the
current range), but better than the current situation.

Alexei reported that he recently run into case i) with a JITed eBPF
program (these are all page aligned) as the last symbol which wasn't
properly shown in the call graph (while other eBPF program symbols in
the rb tree were displayed correctly). Since this is a generic issue,
lets try to improve the heuristic a bit.

Reported-and-Tested-by: Alexei Starovoitov 
Signed-off-by: Daniel Borkmann 
Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup")
Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

userfaultfd: selftest: vm: allow to build in vm/ directory

2017-12-20T09:04:53+00:00

[ Upstream commit 46aa6a302b53f543f8e8b8e1714dc5e449ad36a6 ]

linux/tools/testing/selftests/vm $ make

  gcc -Wall -I ../../../../usr/include     compaction_test.c -lrt -o /compaction_test
  /usr/lib/gcc/x86_64-pc-linux-gnu/4.9.4/../../../../x86_64-pc-linux-gnu/bin/ld: cannot open output file /compaction_test: Permission denied
  collect2: error: ld returned 1 exit status
  make: *** [../lib.mk:54: /compaction_test] Error 1

Since commit a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
selftests/vm build fails if run from the "selftests/vm" directory, but
it works in the selftests/ directory.  It's quicker to be able to do a
local vm-only build after a tree wipe and this patch allows for it
again.

Link: http://lkml.kernel.org/r/20170302173738.18994-4-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli 
Cc: Mike Rapoport 
Cc: "Dr. David Alan Gilbert" 
Cc: Mike Kravetz 
Cc: Pavel Emelyanov 
Cc: Hillf Danton 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

selftest/powerpc: Fix false failures for skipped tests

2017-12-16T09:33:51+00:00

[ Upstream commit a6d8a21596df041f36f4c2ccc260c459e3e851f1 ]

Tests under alignment subdirectory are skipped when executed on previous
generation hardware, but harness still marks them as failed.

  test: test_copy_unaligned
  tags: git_version:unknown
  [SKIP] Test skipped on line 26
  skip: test_copy_unaligned
  selftests: copy_unaligned [FAIL]

The MAGIC_SKIP_RETURN_VALUE value assigned to rc variable is retained till
the program exit which causes the test to be marked as failed.

This patch resets the value before returning to the main() routine.
With this patch the test o/p is as follows:

  test: test_copy_unaligned
  tags: git_version:unknown
  [SKIP] Test skipped on line 26
  skip: test_copy_unaligned
  selftests: copy_unaligned [PASS]

Signed-off-by: Sachin Sant 
Signed-off-by: Michael Ellerman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

hv: kvp: Avoid reading past allocated blocks from KVP file

2017-12-16T09:33:48+00:00

commit 297d6b6e56c2977fc504c61bbeeaa21296923f89 upstream.

While reading in more than one block (50) of KVP records, the allocation
goes per block, but the reads used the total number of allocated records
(without resetting the pointer/stream). This causes the records buffer to
overrun when the refresh reads more than one block over the previous
capacity (e.g. reading more than 100 KVP records whereas the in-memory
database was empty before).

Fix this by reading the correct number of KVP records from file each time.

Signed-off-by: Paul Meyer 
Signed-off-by: Long Li 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman

perf test attr: Fix ignored test case result

2017-12-09T17:42:41+00:00

[ Upstream commit 22905582f6dd4bbd0c370fe5732c607452010c04 ]

Command perf test -v 16 (Setup struct perf_event_attr test) always
reports success even if the test case fails.  It works correctly if you
also specify -F (for don't fork).

   root@s35lp76 perf]# ./perf test -v 16
   15: Setup struct perf_event_attr               :
   --- start ---
   running './tests/attr/test-record-no-delay'
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.002 MB /tmp/tmp4E1h7R/perf.data
     (1 samples) ]
   expected task=0, got 1
   expected precise_ip=0, got 3
   expected wakeup_events=1, got 0
   FAILED './tests/attr/test-record-no-delay' - match failure
   test child finished with 0
   ---- end ----
   Setup struct perf_event_attr: Ok

The reason for the wrong error reporting is the return value of the
system() library call. It is called in run_dir() file tests/attr.c and
returns the exit status, in above case 0xff00.

This value is given as parameter to the exit() function which can only
handle values 0-0xff.

The child process terminates with exit value of 0 and the parent does
not detect any error.

This patch corrects the error reporting and prints the correct test
result.

Signed-off-by: Thomas-Mich Richter 
Acked-by: Jiri Olsa 
Cc: Heiko Carstens 
Cc: Hendrik Brueckner 
Cc: Martin Schwidefsky 
Cc: Thomas-Mich Richter 
LPU-Reference: 20170913081209.39570-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-rdube6rfcjsr1nzue72c7lqn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

selftests/x86/ldt_get: Add a few additional tests for limits

2017-12-09T17:42:39+00:00

[ Upstream commit fec8f5ae1715a01c72ad52cb2ecd8aacaf142302 ]

We weren't testing the .limit and .limit_in_pages fields very well.
Add more tests.

This addition seems to trigger the "bits 16:19 are undefined" issue
that was fixed in an earlier patch.  I think that, at least on my
CPU, the high nibble of the limit ends in LAR bits 16:19.

Signed-off-by: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/5601c15ea9b3113d288953fd2838b18bedf6bc67.1509794321.git.luto@kernel.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

tools: firmware: check for distro fallback udev cancel rule

2017-11-15T16:13:13+00:00

commit afb999cdef69148f366839e74470d8f5375ba5f1 upstream.

Some distributions (Debian, OpenSUSE) have a udev rule in place to cancel
all fallback mechanism uevents immediately. This would obviously
make it hard to test against the fallback mechanism test interface,
so we need to check for this.

Signed-off-by: Luis R. Rodriguez 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

selftests: firmware: send expected errors to /dev/null

2017-11-15T16:13:13+00:00

commit 880444e214cfd293a2e8cc4bd3505f7ffa6ce33a upstream.

Error that we expect should not be spilled to stdout.

Without this we get:

./fw_filesystem.sh: line 58: printf: write error: Invalid argument
./fw_filesystem.sh: line 63: printf: write error: No such device
./fw_filesystem.sh: line 69: echo: write error: No such file or directory
./fw_filesystem.sh: filesystem loading works
./fw_filesystem.sh: async filesystem loading works

With it:

./fw_filesystem.sh: filesystem loading works
./fw_filesystem.sh: async filesystem loading works

Signed-off-by: Luis R. Rodriguez 
[AmitP: Dropped the async trigger testing parts from original commit]
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

selftests: firmware: add empty string and async tests

2017-11-15T16:13:13+00:00

commit 1b1fe542b6f010cf6bc7e1c92805e1c0e133e007 upstream.

Now that we've added a 'trigger_async_request' knob to test the
request_firmware_nowait() API, let's use it. Also add tests for the
empty ("") string, since there have been a couple errors in that
handling already.

Since we now have real ways that the sysfs write might fail, let's add
the appropriate check on the 'echo' lines too.

Signed-off-by: Brian Norris 
Acked-by: Kees Cook 
Signed-off-by: Shuah Khan 
[AmitP: Dropped the async trigger testing parts from original commit]
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman