linux-toradex.git/tools, branch v4.9.76

KPTI: Rename to PAGE_TABLE_ISOLATION

2018-01-05T14:46:35+00:00

This renames CONFIG_KAISER to CONFIG_PAGE_TABLE_ISOLATION.

Signed-off-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman

kaiser: add "nokaiser" boot option, using ALTERNATIVE

2018-01-05T14:46:34+00:00

Added "nokaiser" boot option: an early param like "noinvpcid".
Most places now check int kaiser_enabled (#defined 0 when not
CONFIG_KAISER) instead of #ifdef CONFIG_KAISER; but entry_64.S
and entry_64_compat.S are using the ALTERNATIVE technique, which
patches in the preferred instructions at runtime.  That technique
is tied to x86 cpu features, so X86_FEATURE_KAISER is fabricated.

Prior to "nokaiser", Kaiser #defined _PAGE_GLOBAL 0: revert that,
but be careful with both _PAGE_GLOBAL and CR4.PGE: setting them when
nokaiser like when !CONFIG_KAISER, but not setting either when kaiser -
neither matters on its own, but it's hard to be sure that _PAGE_GLOBAL
won't get set in some obscure corner, or something add PGE into CR4.
By omitting _PAGE_GLOBAL from __supported_pte_mask when kaiser_enabled,
all page table setup which uses pte_pfn() masks it out of the ptes.

It's slightly shameful that the same declaration versus definition of
kaiser_enabled appears in not one, not two, but in three header files
(asm/kaiser.h, asm/pgtable.h, asm/tlbflush.h).  I felt safer that way,
than with #including any of those in any of the others; and did not
feel it worth an asm/kaiser_enabled.h - kernel/cpu/common.c includes
them all, so we shall hear about it if they get out of synch.

Cleanups while in the area: removed the silly #ifdef CONFIG_KAISER
from kaiser.c; removed the unused native_get_normal_pgd(); removed
the spurious reg clutter from SWITCH_*_CR3 macro stubs; corrected some
comments.  But more interestingly, set CR4.PSE in secondary_startup_64:
the manual is clear that it does not matter whether it's 0 or 1 when
4-level-pts are enabled, but I was distracted to find cr4 different on
BSP and auxiliaries - BSP alone was adding PSE, in probe_page_size_mask().

Signed-off-by: Hugh Dickins 
Acked-by: Jiri Kosina 
Signed-off-by: Greg Kroah-Hartman

usbip: fix usbip bind writing random string after command in match_busid

2018-01-02T19:35:15+00:00

commit 544c4605acc5ae4afe7dd5914147947db182f2fb upstream.

usbip bind writes commands followed by random string when writing to
match_busid attribute in sysfs, caused by using full variable size
instead of string length.

Signed-off-by: Juan Zea 
Acked-by: Shuah Khan 
Signed-off-by: Greg Kroah-Hartman

sync objtool's copy of x86-opcode-map.txt

2018-01-02T19:35:06+00:00

When building objtool, we get the warning:
	warning: objtool: x86 instruction decoder differs from kernel

That's due to commit 2816c0455cea088f07a210f8a00701a82a78aa9c which was
commit 12a78d43de767eaf8fb272facb7a7b6f2dc6a9df upstream that modified
arch/x86/lib/x86-opcode-map.txt without also updating the objtool copy.
The objtool copy was updated in a much larger patch upstream, but we
don't need all of that here, so just update the single file.

If this gets too annoying, I'll just end up doing what we did for 4.14
and backport the whole series to keep this from happening again, but as
this seems to be rare in the 4.9-stable series, this single patch should
be fine.

Cc: Masami Hiramatsu 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

perf symbols: Fix symbols__fixup_end heuristic for corner cases

2017-12-20T09:07:26+00:00

[ Upstream commit e7ede72a6d40cb3a30c087142d79381ca8a31dab ]

The current symbols__fixup_end() heuristic for the last entry in the rb
tree is suboptimal as it leads to not being able to recognize the symbol
in the call graph in a couple of corner cases, for example:

 i) If the symbol has a start address (f.e. exposed via kallsyms)
    that is at a page boundary, then the roundup(curr->start, 4096)
    for the last entry will result in curr->start == curr->end with
    a symbol length of zero.

ii) If the symbol has a start address that is shortly before a page
    boundary, then also here, curr->end - curr->start will just be
    very few bytes, where it's unrealistic that we could perform a
    match against.

Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so
that we can catch such corner cases and have a better chance to find
that specific symbol. It's still just best effort as the real end of the
symbol is unknown to us (and could even be at a larger offset than the
current range), but better than the current situation.

Alexei reported that he recently run into case i) with a JITed eBPF
program (these are all page aligned) as the last symbol which wasn't
properly shown in the call graph (while other eBPF program symbols in
the rb tree were displayed correctly). Since this is a generic issue,
lets try to improve the heuristic a bit.

Reported-and-Tested-by: Alexei Starovoitov 
Signed-off-by: Daniel Borkmann 
Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup")
Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

userfaultfd: selftest: vm: allow to build in vm/ directory

2017-12-20T09:07:18+00:00

[ Upstream commit 46aa6a302b53f543f8e8b8e1714dc5e449ad36a6 ]

linux/tools/testing/selftests/vm $ make

  gcc -Wall -I ../../../../usr/include     compaction_test.c -lrt -o /compaction_test
  /usr/lib/gcc/x86_64-pc-linux-gnu/4.9.4/../../../../x86_64-pc-linux-gnu/bin/ld: cannot open output file /compaction_test: Permission denied
  collect2: error: ld returned 1 exit status
  make: *** [../lib.mk:54: /compaction_test] Error 1

Since commit a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
selftests/vm build fails if run from the "selftests/vm" directory, but
it works in the selftests/ directory.  It's quicker to be able to do a
local vm-only build after a tree wipe and this patch allows for it
again.

Link: http://lkml.kernel.org/r/20170302173738.18994-4-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli 
Cc: Mike Rapoport 
Cc: "Dr. David Alan Gilbert" 
Cc: Mike Kravetz 
Cc: Pavel Emelyanov 
Cc: Hillf Danton 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

x86/mpx/selftests: Fix up weird arrays

2017-12-14T08:28:22+00:00

[ Upstream commit a6400120d042397675fcf694060779d21e9e762d ]

The MPX hardware data structurse are defined in a weird way: they define
their size in bytes and then union that with the type with which we want
to access them.

Yes, this is weird, but it does work.  But, new GCC's complain that we
are accessing the array out of bounds.  Just make it a zero-sized array
so gcc will stop complaining.  There was not really a bug here.

Signed-off-by: Dave Hansen 
Acked-by: Thomas Gleixner 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/20171111001229.58A7933D@viggo.jf.intel.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

selftest/powerpc: Fix false failures for skipped tests

2017-12-14T08:28:17+00:00

[ Upstream commit a6d8a21596df041f36f4c2ccc260c459e3e851f1 ]

Tests under alignment subdirectory are skipped when executed on previous
generation hardware, but harness still marks them as failed.

  test: test_copy_unaligned
  tags: git_version:unknown
  [SKIP] Test skipped on line 26
  skip: test_copy_unaligned
  selftests: copy_unaligned [FAIL]

The MAGIC_SKIP_RETURN_VALUE value assigned to rc variable is retained till
the program exit which causes the test to be marked as failed.

This patch resets the value before returning to the main() routine.
With this patch the test o/p is as follows:

  test: test_copy_unaligned
  tags: git_version:unknown
  [SKIP] Test skipped on line 26
  skip: test_copy_unaligned
  selftests: copy_unaligned [PASS]

Signed-off-by: Sachin Sant 
Signed-off-by: Michael Ellerman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

x86/selftests: Add clobbers for int80 on x86_64

2017-12-14T08:28:17+00:00

[ Upstream commit 2a4d0c627f5374f365a873dea4e10ae0bb437680 ]

Kernel erases R8..R11 registers prior returning to userspace
from int80:

  https://lkml.org/lkml/2009/10/1/164

GCC can reuse these registers and doesn't expect them to change
during syscall invocation. I met this kind of bug in CRIU once
GCC 6.1 and CLANG stored local variables in those registers
and the kernel zerofied them during syscall:

  https://github.com/xemul/criu/commit/990d33f1a1cdd17bca6c2eb059ab3be2564f7fa2

By that reason I suggest to add those registers to clobbers
in selftests.  Also, as noted by Andy - removed unneeded clobber
for flags in INT $0x80 inline asm.

Signed-off-by: Dmitry Safonov 
Acked-by: Andy Lutomirski 
Cc: 0x7f454c46@gmail.com
Cc: Borislav Petkov 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Shuah Khan 
Cc: Thomas Gleixner 
Cc: linux-kselftest@vger.kernel.org
Link: http://lkml.kernel.org/r/20170213101336.20486-1-dsafonov@virtuozzo.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

hv: kvp: Avoid reading past allocated blocks from KVP file

2017-12-14T08:28:11+00:00

commit 297d6b6e56c2977fc504c61bbeeaa21296923f89 upstream.

While reading in more than one block (50) of KVP records, the allocation
goes per block, but the reads used the total number of allocated records
(without resetting the pointer/stream). This causes the records buffer to
overrun when the refresh reads more than one block over the previous
capacity (e.g. reading more than 100 KVP records whereas the in-memory
database was empty before).

Fix this by reading the correct number of KVP records from file each time.

Signed-off-by: Paul Meyer 
Signed-off-by: Long Li 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman