linux-toradex.git/virt, branch v3.14.19

kvm: iommu: fix the third parameter of kvm_iommu_put_pages (CVE-2014-3601)

2014-09-05T23:34:15+00:00

commit 350b8bdd689cd2ab2c67c8a86a0be86cfa0751a7 upstream.

The third parameter of kvm_iommu_put_pages is wrong,
It should be 'gfn - slot->base_gfn'.

By making gfn very large, malicious guest or userspace can cause kvm to
go to this error path, and subsequently to pass a huge value as size.
Alternatively if gfn is small, then pages would be pinned but never
unpinned, causing host memory leak and local DOS.

Passing a reasonable but large value could be the most dangerous case,
because it would unpin a page that should have stayed pinned, and thus
allow the device to DMA into arbitrary memory.  However, this cannot
happen because of the condition that can trigger the error:

- out of memory (where you can't allocate even a single page)
  should not be possible for the attacker to trigger

- when exceeding the iommu's address space, guest pages after gfn
  will also exceed the iommu's address space, and inside
  kvm_iommu_put_pages() the iommu_iova_to_phys() will fail.  The
  page thus would not be unpinned at all.

Reported-by: Jack Morgenstein 
Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

KVM: x86: always exit on EOIs for interrupts listed in the IOAPIC redir table

2014-09-05T23:34:15+00:00

commit 0f6c0a740b7d3e1f3697395922d674000f83d060 upstream.

Currently, the EOI exit bitmap (used for APICv) does not include
interrupts that are masked.  However, this can cause a bug that manifests
as an interrupt storm inside the guest.  Alex Williamson reported the
bug and is the one who really debugged this; I only wrote the patch. :)

The scenario involves a multi-function PCI device with OHCI and EHCI
USB functions and an audio function, all assigned to the guest, where
both USB functions use legacy INTx interrupts.

As soon as the guest boots, interrupts for these devices turn into an
interrupt storm in the guest; the host does not see the interrupt storm.
Basically the EOI path does not work, and the guest continues to see the
interrupt over and over, even after it attempts to mask it at the APIC.
The bug is only visible with older kernels (RHEL6.5, based on 2.6.32
with not many changes in the area of APIC/IOAPIC handling).

Alex then tried forcing bit 59 (corresponding to the USB functions' IRQ)
on in the eoi_exit_bitmap and TMR, and things then work.  What happens
is that VFIO asserts IRQ11, then KVM recomputes the EOI exit bitmap.
It does not have set bit 59 because the RTE was masked, so the IOAPIC
never sees the EOI and the interrupt continues to fire in the guest.

My guess was that the guest is masking the interrupt in the redirection
table in the interrupt routine, i.e. while the interrupt is set in a
LAPIC's ISR, The simplest fix is to ignore the masking state, we would
rather have an unnecessary exit rather than a missed IRQ ACK and anyway
IOAPIC interrupts are not as performance-sensitive as for example MSIs.
Alex tested this patch and it fixed his bug.

[Thanks to Alex for his precise description of the problem
 and initial debugging effort.  A lot of the text above is
 based on emails exchanged with him.]

Reported-by: Alex Williamson 
Tested-by: Alex Williamson 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155)

2014-05-13T11:32:48+00:00

commit 5678de3f15010b9022ee45673f33bcfc71d47b60 upstream.

QE reported that they got the BUG_ON in ioapic_service to trigger.
I cannot reproduce it, but there are two reasons why this could happen.

The less likely but also easiest one, is when kvm_irq_delivery_to_apic
does not deliver to any APIC and returns -1.

Because irqe.shorthand == 0, the kvm_for_each_vcpu loop in that
function is never reached.  However, you can target the similar loop in
kvm_irq_delivery_to_apic_fast; just program a zero logical destination
address into the IOAPIC, or an out-of-range physical destination address.

Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

KVM: async_pf: mm->mm_users can not pin apf->mm

2014-05-13T11:32:47+00:00

commit 41c22f626254b9dc0376928cae009e73d1b6a49a upstream.

get_user_pages(mm) is simply wrong if mm->mm_users == 0 and exit_mmap/etc
was already called (or is in progress), mm->mm_count can only pin mm->pgd
and mm_struct itself.

Change kvm_setup_async_pf/async_pf_execute to inc/dec mm->mm_users.

kvm_create_vm/kvm_destroy_vm play with ->mm_count too but this case looks
fine at first glance, it seems that this ->mm is only used to verify that
current->mm == kvm->mm.

Signed-off-by: Oleg Nesterov 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

KVM: ARM: vgic: Fix sgi dispatch problem

2014-05-13T11:32:47+00:00

commit 91021a6c8ffdc55804dab5acdfc7de4f278b9ac3 upstream.

When dispatch SGI(mode == 0), that is the vcpu of VM should send
sgi to the cpu which the target_cpus list.
So, there must add the "break" to branch of case 0.

Signed-off-by: Haibin Wang 
Acked-by: Marc Zyngier 
Signed-off-by: Christoffer Dall 
Signed-off-by: Greg Kroah-Hartman

arm64: KVM: Add VGIC device control for arm64

2014-02-14T10:09:49+00:00

This fixes the build breakage introduced by
c07a0191ef2de1f9510f12d1f88e3b0b5cd8d66f and adds support for the device
control API and save/restore of the VGIC state for ARMv8.

The defines were simply missing from the arm64 header files and
uaccess.h must be implicitly imported from somewhere else on arm.

Signed-off-by: Christoffer Dall 
Signed-off-by: Paolo Bonzini

KVM: return an error code in kvm_vm_ioctl_register_coalesced_mmio()

2014-01-30T10:56:09+00:00

If kvm_io_bus_register_dev() fails then it returns success but it should
return an error code.

I also did a little cleanup like removing an impossible NULL test.

Cc: stable@vger.kernel.org
Fixes: 2b3c246a682c ('KVM: Make coalesced mmio use a device per zone')
Signed-off-by: Dan Carpenter 
Signed-off-by: Paolo Bonzini

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2014-01-23T05:40:43+00:00

Pull KVM updates from Paolo Bonzini:
 "First round of KVM updates for 3.14; PPC parts will come next week.

  Nothing major here, just bugfixes all over the place.  The most
  interesting part is the ARM guys' virtualized interrupt controller
  overhaul, which lets userspace get/set the state and thus enables
  migration of ARM VMs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits)
  kvm: make KVM_MMU_AUDIT help text more readable
  KVM: s390: Fix memory access error detection
  KVM: nVMX: Update guest activity state field on L2 exits
  KVM: nVMX: Fix nested_run_pending on activity state HLT
  KVM: nVMX: Clean up handling of VMX-related MSRs
  KVM: nVMX: Add tracepoints for nested_vmexit and nested_vmexit_inject
  KVM: nVMX: Pass vmexit parameters to nested_vmx_vmexit
  KVM: nVMX: Leave VMX mode on clearing of feature control MSR
  KVM: VMX: Fix DR6 update on #DB exception
  KVM: SVM: Fix reading of DR6
  KVM: x86: Sync DR7 on KVM_SET_DEBUGREGS
  add support for Hyper-V reference time counter
  KVM: remove useless write to vcpu->hv_clock.tsc_timestamp
  KVM: x86: fix tsc catchup issue with tsc scaling
  KVM: x86: limit PIT timer frequency
  KVM: x86: handle invalid root_hpa everywhere
  kvm: Provide kvm_vcpu_eligible_for_directed_yield() stub
  kvm: vfio: silence GCC warning
  KVM: ARM: Remove duplicate include
  arm/arm64: KVM: relax the requirements of VMA alignment for THP
  ...

kvm: Provide kvm_vcpu_eligible_for_directed_yield() stub

2014-01-15T11:03:23+00:00

Commit 7940876e1330671708186ac3386aa521ffb5c182 ("kvm: make local
functions static") broke KVM PPC builds due to removing (rather than
moving) the stub version of kvm_vcpu_eligible_for_directed_yield().

This patch reintroduces it.

Signed-off-by: Scott Wood 
Cc: Stephen Hemminger 
Cc: Alexander Graf 
[Move the #ifdef inside the function. - Paolo]
Signed-off-by: Paolo Bonzini

kvm: vfio: silence GCC warning

2014-01-15T11:01:48+00:00

Building vfio.o triggers a GCC warning (when building for 32 bits x86):
    arch/x86/kvm/../../../virt/kvm/vfio.c: In function 'kvm_vfio_set_group':
    arch/x86/kvm/../../../virt/kvm/vfio.c:104:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
      void __user *argp = (void __user *)arg;
                          ^

Silence this warning by casting arg to unsigned long.

argp's current type, "void __user *", is always casted to "int32_t
__user *". So its type might as well be changed to "int32_t __user *".

Signed-off-by: Paul Bolle 
Signed-off-by: Paolo Bonzini