Merge tag 'for-linus-20150901' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "SPI NOR:
   - reduce virtual address space requirements for fsl-quadspi memory map
   - new fsl-quadspi IP support: imx6ul-qspi and imx7d-qspi
   - add new NOR flash device support
   - add new driver for NXP SPI Flash Interface (SPIFI)
   - stop abusing SPI API structs for non-SPI framework
   - fixup DT table matching for new "jedec,spi-nor" string

  NAND:
   - brcmnand: fix big endian MIPS macro usage
   - denali: refactor to use devres, dev_*() printing, etc.
   - OMAP ELM: change the module alias to actually be usable
   - pxa3xx_nand: fixup a few command sequencing issues -- both new and old
      - race conditions in the IRQ handler status clearing
      - problems when a bootloader left interrupts pending
      - config issues when overriding the bootloader configuration
   - new flash device support
   - sunxi_nand:
      - optimize timing configuration by calculation, rather than fixed
        fail-safe values
      - use EDO setting from ONFI
   - r852: fix compiler warnings
   - davinci: add 4KB page support

  Core:
   - oobtest: correct debug print information"

* tag 'for-linus-20150901' of git://git.infradead.org/linux-mtd: (42 commits)
  mtd: mtd_oobtest: Fix the address offset with vary_offset case
  mtd: blkdevs: fix switch-bool compilation warning
  mtd: spi-nor: stop (ab)using struct spi_device_id
  mtd: nand: add Toshiba TC58NVG0S3E to nand_ids table
  mtd: dataflash: Export OF module alias information
  nand: pxa3xx: Increase READ_ID buffer and make the size static
  mtd: nand: pxa3xx-nand: fix random command timeouts
  mtd: nand: pxa3xx_nand: fix early spurious interrupt
  mtd: pxa3xx_nand: add a default chunk size
  mtd: omap_elm: Fix module alias
  mtd: physmap_of: fix null pointer deference when kzalloc returns null
  mtd: nettel: do not ignore mtd_device_register() failure in nettel_init()
  mtd: denali_pci: switch to dev_err()
  mtd: denali_pci: refactor driver using devres API
  mtd: denali_pci: use module_pci_driver() macro
  mtd: denali: hide core part from user in Kconfig
  mtd: spi-nor: add Spansion S25FL204K support
  mtd: spi-nor: Improve Kconfig help text for SPI_FSL_QUADSPI
  mtd: spi-nor: add driver for NXP SPI Flash Interface (SPIFI)
  doc: dt: add documentation for nxp,lpc1773-spifi
  ...

23 files changed, 1010 insertions, 233 deletions

diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
index 4461dc71cb10..862aa2f8837a 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -1,7 +1,8 @@
 * Freescale Quad Serial Peripheral Interface(QuadSPI)
 
 Required properties:
-  - compatible : Should be "fsl,vf610-qspi" or "fsl,imx6sx-qspi"
+  - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
+		 "fsl,imx7d-qspi", "fsl,imx6ul-qspi"
   - reg : the first contains the register location and length,
           the second contains the memory mapping address and length
   - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
diff --git a/Documentation/devicetree/bindings/mtd/nxp-spifi.txt b/Documentation/devicetree/bindings/mtd/nxp-spifi.txt
new file mode 100644
index 000000000000..f8b6b250654e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nxp-spifi.txt
@@ -0,0 +1,58 @@
+* NXP SPI Flash Interface (SPIFI)
+
+NXP SPIFI is a specialized SPI interface for serial Flash devices.
+It supports one Flash device with 1-, 2- and 4-bits width in SPI
+mode 0 or 3. The controller operates in either command or memory
+mode. In memory mode the Flash is accessible from the CPU as
+normal memory.
+
+Required properties:
+  - compatible : Should be "nxp,lpc1773-spifi"
+  - reg : the first contains the register location and length,
+          the second contains the memory mapping address and length
+  - reg-names: Should contain the reg names "spifi" and "flash"
+  - interrupts : Should contain the interrupt for the device
+  - clocks : The clocks needed by the SPIFI controller
+  - clock-names : Should contain the clock names "spifi" and "reg"
+
+Optional properties:
+ - resets : phandle + reset specifier
+
+The SPI Flash must be a child of the SPIFI node and must have a
+compatible property as specified in bindings/mtd/jedec,spi-nor.txt
+
+Optionally it can also contain the following properties.
+ - spi-cpol : Controller only supports mode 0 and 3 so either
+              both spi-cpol and spi-cpha should be present or
+              none of them
+ - spi-cpha : See above
+ - spi-rx-bus-width : Used to select how many pins that are used
+                      for input on the controller
+
+See bindings/spi/spi-bus.txt for more information.
+
+Example:
+spifi: spifi@40003000 {
+	compatible = "nxp,lpc1773-spifi";
+	reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+	reg-names = "spifi", "flash";
+	interrupts = <30>;
+	clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+	clock-names = "spifi", "reg";
+	resets = <&rgu 53>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "data";
+			reg = <0 0x200000>;
+		};
+	};
+};
+
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index d313f948b96c..9cd3631170ef 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -223,8 +223,6 @@ static int m25p_probe(struct spi_device *spi)
 	 */
 	if (data && data->type)
 		flash_name = data->type;
-	else if (!strcmp(spi->modalias, "spi-nor"))
-		flash_name = NULL; /* auto-detect */
 	else
 		flash_name = spi->modalias;
 
@@ -289,19 +287,25 @@ static const struct spi_device_id m25p_ids[] = {
 	{"m25p40-nonjedec"},	{"m25p80-nonjedec"},	{"m25p16-nonjedec"},
 	{"m25p32-nonjedec"},	{"m25p64-nonjedec"},	{"m25p128-nonjedec"},
 
-	/*
-	 * Generic support for SPI NOR that can be identified by the JEDEC READ
-	 * ID opcode (0x9F). Use this, if possible.
-	 */
-	{"spi-nor"},
 	{ },
 };
 MODULE_DEVICE_TABLE(spi, m25p_ids);
 
+static const struct of_device_id m25p_of_table[] = {
+	/*
+	 * Generic compatibility for SPI NOR that can be identified by the
+	 * JEDEC READ ID opcode (0x9F). Use this, if possible.
+	 */
+	{ .compatible = "jedec,spi-nor" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, m25p_of_table);
+
 static struct spi_driver m25p80_driver = {
 	.driver = {
 		.name	= "m25p80",
 		.owner	= THIS_MODULE,
+		.of_match_table = m25p_of_table,
 	},
 	.id_table	= m25p_ids,
 	.probe	= m25p_probe,
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 0099aba72a8b..df6f61137376 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -102,6 +102,7 @@ static const struct of_device_id dataflash_dt_ids[] = {
 	{ .compatible = "atmel,dataflash", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, dataflash_dt_ids);
 #endif
 
 /* ......................................................................... */
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index eadcfffc4f9c..a577ef8553d0 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -385,20 +385,28 @@ static int __init nettel_init(void)
 	}
 	rc = mtd_device_register(intel_mtd, nettel_intel_partitions,
 				 num_intel_partitions);
+	if (rc)
+		goto out_map_destroy;
 #endif
 
 	if (amd_mtd) {
 		rc = mtd_device_register(amd_mtd, nettel_amd_partitions,
 					 num_amd_partitions);
+		if (rc)
+			goto out_mtd_unreg;
 	}
 
 #ifdef CONFIG_MTD_CFI_INTELEXT
 	register_reboot_notifier(&nettel_notifier_block);
 #endif
 
-	return(rc);
+	return rc;
 
+out_mtd_unreg:
 #ifdef CONFIG_MTD_CFI_INTELEXT
+	mtd_device_unregister(intel_mtd);
+out_map_destroy:
+	map_destroy(intel_mtd);
 out_unmap1:
 	iounmap(nettel_intel_map.virt);
 #endif
@@ -407,8 +415,7 @@ out_unmap2:
 	iounmap(nettel_mmcrp);
 	iounmap(nettel_amd_map.virt);
 
-	return(rc);
-
+	return rc;
 }
 
 /****************************************************************************/
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 774b32fd29e6..3e614e9119d5 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -130,6 +130,8 @@ static const char * const *of_get_probes(struct device_node *dp)
 			count++;
 
 	res = kzalloc((count + 1)*sizeof(*res), GFP_KERNEL);
+	if (!res)
+		return NULL;
 	count = 0;
 	while (cplen > 0) {
 		res[count] = cp;
@@ -311,6 +313,10 @@ static int of_flash_probe(struct platform_device *dev)
 
 	ppdata.of_node = dp;
 	part_probe_types = of_get_probes(dp);
+	if (!part_probe_types) {
+		err = -ENOMEM;
+		goto err_out;
+	}
 	mtd_device_parse_register(info->cmtd, part_probe_types, &ppdata,
 			NULL, 0);
 	of_free_probes(part_probe_types);
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 41acc507b22e..88304751eb8a 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -97,14 +97,13 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr,
 	if (req->cmd_flags & REQ_DISCARD)
 		return tr->discard(dev, block, nsect);
 
-	switch(rq_data_dir(req)) {
-	case READ:
+	if (rq_data_dir(req) == READ) {
 		for (; nsect > 0; nsect--, block++, buf += tr->blksize)
 			if (tr->readsect(dev, block, buf))
 				return -EIO;
 		rq_flush_dcache_pages(req);
 		return 0;
-	case WRITE:
+	} else {
 		if (!tr->writesect)
 			return -EIO;
 
@@ -113,9 +112,6 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr,
 			if (tr->writesect(dev, block, buf))
 				return -EIO;
 		return 0;
-	default:
-		printk(KERN_NOTICE "Unknown request %u\n", rq_data_dir(req));
-		return -EIO;
 	}
 }
 
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 5b2806a7e5f7..3324281d1f53 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -42,23 +42,20 @@ config MTD_SM_COMMON
 	default n
 
 config MTD_NAND_DENALI
-        tristate "Support Denali NAND controller"
-        depends on HAS_DMA
-        help
-	  Enable support for the Denali NAND controller.  This should be
-	  combined with either the PCI or platform drivers to provide device
-	  registration.
+	tristate
 
 config MTD_NAND_DENALI_PCI
         tristate "Support Denali NAND controller on Intel Moorestown"
-	depends on PCI && MTD_NAND_DENALI
+	select MTD_NAND_DENALI
+	depends on HAS_DMA && PCI
         help
           Enable the driver for NAND flash on Intel Moorestown, using the
           Denali NAND controller core.
 
 config MTD_NAND_DENALI_DT
 	tristate "Support Denali NAND controller as a DT device"
-	depends on HAVE_CLK && MTD_NAND_DENALI
+	select MTD_NAND_DENALI
+	depends on HAS_DMA && HAVE_CLK
 	help
 	  Enable the driver for NAND flash on platforms using a Denali NAND
 	  controller as a DT device.
diff --git a/drivers/mtd/nand/brcmnand/brcmnand.h b/drivers/mtd/nand/brcmnand/brcmnand.h
index a20c73630b7b..169f99e38a26 100644
--- a/drivers/mtd/nand/brcmnand/brcmnand.h
+++ b/drivers/mtd/nand/brcmnand/brcmnand.h
@@ -50,7 +50,7 @@ static inline u32 brcmnand_readl(void __iomem *addr)
 	 * Other architectures (e.g., ARM) either do not support big endian, or
 	 * else leave I/O in little endian mode.
 	 */
-	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 		return __raw_readl(addr);
 	else
 		return readl_relaxed(addr);
@@ -59,7 +59,7 @@ static inline u32 brcmnand_readl(void __iomem *addr)
 static inline void brcmnand_writel(u32 val, void __iomem *addr)
 {
 	/* See brcmnand_readl() comments */
-	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 		__raw_writel(val, addr);
 	else
 		writel_relaxed(val, addr);
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index feb6d18de78d..b90801302df4 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -520,6 +520,32 @@ static struct nand_ecclayout hwecc4_2048 = {
 	},
 };
 
+/*
+ * An ECC layout for using 4-bit ECC with large-page (4096bytes) flash,
+ * storing ten ECC bytes plus the manufacturer's bad block marker byte,
+ * and not overlapping the default BBT markers.
+ */
+static struct nand_ecclayout hwecc4_4096 = {
+	.eccbytes = 80,
+	.eccpos = {
+		/* at the end of spare sector */
+		48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
+		58, 59, 60, 61, 62, 63, 64, 65, 66, 67,
+		68, 69, 70, 71, 72, 73, 74, 75, 76, 77,
+		78, 79, 80, 81, 82, 83, 84, 85, 86, 87,
+		88, 89, 90, 91, 92, 93, 94, 95, 96, 97,
+		98, 99, 100, 101, 102, 103, 104, 105, 106, 107,
+		108, 109, 110, 111, 112, 113, 114, 115, 116, 117,
+		118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
+	},
+	.oobfree = {
+		/* 2 bytes at offset 0 hold manufacturer badblock markers */
+		{.offset = 2, .length = 46, },
+		/* 5 bytes at offset 8 hold BBT markers */
+		/* 8 bytes at offset 16 hold JFFS2 clean markers */
+	},
+};
+
 #if defined(CONFIG_OF)
 static const struct of_device_id davinci_nand_of_match[] = {
 	{.compatible = "ti,davinci-nand", },
@@ -796,18 +822,12 @@ static int nand_davinci_probe(struct platform_device *pdev)
 			info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
 			goto syndrome_done;
 		}
+		if (chunks == 8) {
+			info->ecclayout = hwecc4_4096;
+			info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
+			goto syndrome_done;
+		}
 
-		/* 4KiB page chips are not yet supported. The eccpos from
-		 * nand_ecclayout cannot hold 80 bytes and change to eccpos[]
-		 * breaks userspace ioctl interface with mtd-utils. Once we
-		 * resolve this issue, NAND_ECC_HW_OOB_FIRST mode can be used
-		 * for the 4KiB page chips.
-		 *
-		 * TODO: Note that nand_ecclayout has now been expanded and can
-		 *  hold plenty of OOB entries.
-		 */
-		dev_warn(&pdev->dev, "no 4-bit ECC support yet "
-				"for 4KiB-page NAND\n");
 		ret = -EIO;
 		goto err;
 
diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c
index 6e2f387b823f..de31514df282 100644
--- a/drivers/mtd/nand/denali_pci.c
+++ b/drivers/mtd/nand/denali_pci.c
@@ -30,19 +30,19 @@ MODULE_DEVICE_TABLE(pci, denali_pci_ids);
 
 static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	int ret = -ENODEV;
+	int ret;
 	resource_size_t csr_base, mem_base;
 	unsigned long csr_len, mem_len;
 	struct denali_nand_info *denali;
 
-	denali = kzalloc(sizeof(*denali), GFP_KERNEL);
+	denali = devm_kzalloc(&dev->dev, sizeof(*denali), GFP_KERNEL);
 	if (!denali)
 		return -ENOMEM;
 
-	ret = pci_enable_device(dev);
+	ret = pcim_enable_device(dev);
 	if (ret) {
-		pr_err("Spectra: pci_enable_device failed.\n");
-		goto failed_alloc_memery;
+		dev_err(&dev->dev, "Spectra: pci_enable_device failed.\n");
+		return ret;
 	}
 
 	if (id->driver_data == INTEL_CE4100) {
@@ -69,20 +69,19 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	ret = pci_request_regions(dev, DENALI_NAND_NAME);
 	if (ret) {
-		pr_err("Spectra: Unable to request memory regions\n");
-		goto failed_enable_dev;
+		dev_err(&dev->dev, "Spectra: Unable to request memory regions\n");
+		return ret;
 	}
 
 	denali->flash_reg = ioremap_nocache(csr_base, csr_len);
 	if (!denali->flash_reg) {
-		pr_err("Spectra: Unable to remap memory region\n");
-		ret = -ENOMEM;
-		goto failed_req_regions;
+		dev_err(&dev->dev, "Spectra: Unable to remap memory region\n");
+		return -ENOMEM;
 	}
 
 	denali->flash_mem = ioremap_nocache(mem_base, mem_len);
 	if (!denali->flash_mem) {
-		pr_err("Spectra: ioremap_nocache failed!");
+		dev_err(&dev->dev, "Spectra: ioremap_nocache failed!");
 		ret = -ENOMEM;
 		goto failed_remap_reg;
 	}
@@ -99,13 +98,6 @@ failed_remap_mem:
 	iounmap(denali->flash_mem);
 failed_remap_reg:
 	iounmap(denali->flash_reg);
-failed_req_regions:
-	pci_release_regions(dev);
-failed_enable_dev:
-	pci_disable_device(dev);
-failed_alloc_memery:
-	kfree(denali);
-
 	return ret;
 }
 
@@ -117,9 +109,6 @@ static void denali_pci_remove(struct pci_dev *dev)
 	denali_remove(denali);
 	iounmap(denali->flash_reg);
 	iounmap(denali->flash_mem);
-	pci_release_regions(dev);
-	pci_disable_device(dev);
-	kfree(denali);
 }
 
 static struct pci_driver denali_pci_driver = {
@@ -129,14 +118,4 @@ static struct pci_driver denali_pci_driver = {
 	.remove = denali_pci_remove,
 };
 
-static int denali_init_pci(void)
-{
-	return pci_register_driver(&denali_pci_driver);
-}
-module_init(denali_init_pci);
-
-static void denali_exit_pci(void)
-{
-	pci_unregister_driver(&denali_pci_driver);
-}
-module_exit(denali_exit_pci);
+module_pci_driver(denali_pci_driver);
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 7124400d903b..a8804a3da076 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -29,6 +29,10 @@ struct nand_flash_dev nand_flash_ids[] = {
 	 * listed by full ID. We list them first so that we can easily identify
 	 * the most specific match.
 	 */
+	{"TC58NVG0S3E 1G 3.3V 8-bit",
+		{ .id = {0x98, 0xd1, 0x90, 0x15, 0x76, 0x14, 0x01, 0x00} },
+		  SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512),
+		  2 },
 	{"TC58NVG2S0F 4G 3.3V 8-bit",
 		{ .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} },
 		  SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) },
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 52c0c1a3899c..95d0cc49cfc2 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -649,7 +649,8 @@ static void free_device(struct nandsim *ns)
 				kmem_cache_free(ns->nand_pages_slab,
 						ns->pages[i].byte);
 		}
-		kmem_cache_destroy(ns->nand_pages_slab);
+		if (ns->nand_pages_slab)
+			kmem_cache_destroy(ns->nand_pages_slab);
 		vfree(ns->pages);
 	}
 }
@@ -729,8 +730,7 @@ static int init_nandsim(struct mtd_info *mtd)
 	/* Fill the partition_info structure */
 	if (parts_num > ARRAY_SIZE(ns->partitions)) {
 		NS_ERR("too many partitions.\n");
-		ret = -EINVAL;
-		goto error;
+		return -EINVAL;
 	}
 	remains = ns->geom.totsz;
 	next_offset = 0;
@@ -739,14 +739,12 @@ static int init_nandsim(struct mtd_info *mtd)
 
 		if (!part_sz || part_sz > remains) {
 			NS_ERR("bad partition size.\n");
-			ret = -EINVAL;
-			goto error;
+			return -EINVAL;
 		}
 		ns->partitions[i].name   = get_partition_name(i);
 		if (!ns->partitions[i].name) {
 			NS_ERR("unable to allocate memory.\n");
-			ret = -ENOMEM;
-			goto error;
+			return -ENOMEM;
 		}
 		ns->partitions[i].offset = next_offset;
 		ns->partitions[i].size   = part_sz;
@@ -757,14 +755,12 @@ static int init_nandsim(struct mtd_info *mtd)
 	if (remains) {
 		if (parts_num + 1 > ARRAY_SIZE(ns->partitions)) {
 			NS_ERR("too many partitions.\n");
-			ret = -EINVAL;
-			goto error;
+			return -EINVAL;
 		}
 		ns->partitions[i].name   = get_partition_name(i);
 		if (!ns->partitions[i].name) {
 			NS_ERR("unable to allocate memory.\n");
-			ret = -ENOMEM;
-			goto error;
+			return -ENOMEM;
 		}
 		ns->partitions[i].offset = next_offset;
 		ns->partitions[i].size   = remains;
@@ -792,24 +788,18 @@ static int init_nandsim(struct mtd_info *mtd)
 	printk("options: %#x\n",                ns->options);
 
 	if ((ret = alloc_device(ns)) != 0)
-		goto error;
+		return ret;
 
 	/* Allocate / initialize the internal buffer */
 	ns->buf.byte = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
 	if (!ns->buf.byte) {
 		NS_ERR("init_nandsim: unable to allocate %u bytes for the internal buffer\n",
 			ns->geom.pgszoob);
-		ret = -ENOMEM;
-		goto error;
+		return -ENOMEM;
 	}
 	memset(ns->buf.byte, 0xFF, ns->geom.pgszoob);
 
 	return 0;
-
-error:
-	free_device(ns);
-
-	return ret;
 }
 
 /*
diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c
index 376bfe19104f..235ec7992b4c 100644
--- a/drivers/mtd/nand/omap_elm.c
+++ b/drivers/mtd/nand/omap_elm.c
@@ -574,5 +574,5 @@ module_platform_driver(elm_driver);
 
 MODULE_DESCRIPTION("ELM driver for BCH error correction");
 MODULE_AUTHOR("Texas Instruments");
-MODULE_ALIAS("platform: elm");
+MODULE_ALIAS("platform:" DRIVER_NAME);
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 1259cc558ce9..740983a34626 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -45,10 +45,13 @@
 
 /*
  * Define a buffer size for the initial command that detects the flash device:
- * STATUS, READID and PARAM. The largest of these is the PARAM command,
- * needing 256 bytes.
+ * STATUS, READID and PARAM.
+ * ONFI param page is 256 bytes, and there are three redundant copies
+ * to be read. JEDEC param page is 512 bytes, and there are also three
+ * redundant copies to be read.
+ * Hence this buffer should be at least 512 x 3. Let's pick 2048.
  */
-#define INIT_BUFFER_SIZE	256
+#define INIT_BUFFER_SIZE	2048
 
 /* registers and bit definitions */
 #define NDCR		(0x00) /* Control register */
@@ -126,6 +129,13 @@
 #define EXT_CMD_TYPE_LAST_RW	1 /* Last naked read/write */
 #define EXT_CMD_TYPE_MONO	0 /* Monolithic read/write */
 
+/*
+ * This should be large enough to read 'ONFI' and 'JEDEC'.
+ * Let's use 7 bytes, which is the maximum ID count supported
+ * by the controller (see NDCR_RD_ID_CNT_MASK).
+ */
+#define READ_ID_BYTES		7
+
 /* macros for registers read/write */
 #define nand_writel(info, off, val)	\
 	writel_relaxed((val), (info)->mmio_base + (off))
@@ -173,8 +183,6 @@ struct pxa3xx_nand_host {
 	/* calculated from pxa3xx_nand_flash data */
 	unsigned int		col_addr_cycles;
 	unsigned int		row_addr_cycles;
-	size_t			read_id_bytes;
-
 };
 
 struct pxa3xx_nand_info {
@@ -439,8 +447,8 @@ static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
 	ndcr |= NDCR_ND_RUN;
 
 	/* clear status bits and run */
-	nand_writel(info, NDCR, 0);
 	nand_writel(info, NDSR, NDSR_MASK);
+	nand_writel(info, NDCR, 0);
 	nand_writel(info, NDCR, ndcr);
 }
 
@@ -675,8 +683,14 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
 		is_ready = 1;
 	}
 
+	/*
+	 * Clear all status bit before issuing the next command, which
+	 * can and will alter the status bits and will deserve a new
+	 * interrupt on its own. This lets the controller exit the IRQ
+	 */
+	nand_writel(info, NDSR, status);
+
 	if (status & NDSR_WRCMDREQ) {
-		nand_writel(info, NDSR, NDSR_WRCMDREQ);
 		status &= ~NDSR_WRCMDREQ;
 		info->state = STATE_CMD_HANDLE;
 
@@ -697,8 +711,6 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
 			nand_writel(info, NDCB0, info->ndcb3);
 	}
 
-	/* clear NDSR to let the controller exit the IRQ */
-	nand_writel(info, NDSR, status);
 	if (is_completed)
 		complete(&info->cmd_complete);
 	if (is_ready)
@@ -899,18 +911,18 @@ static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
 		break;
 
 	case NAND_CMD_PARAM:
-		info->buf_count = 256;
+		info->buf_count = INIT_BUFFER_SIZE;
 		info->ndcb0 |= NDCB0_CMD_TYPE(0)
 				| NDCB0_ADDR_CYC(1)
 				| NDCB0_LEN_OVRD
 				| command;
 		info->ndcb1 = (column & 0xFF);
-		info->ndcb3 = 256;
-		info->data_size = 256;
+		info->ndcb3 = INIT_BUFFER_SIZE;
+		info->data_size = INIT_BUFFER_SIZE;
 		break;
 
 	case NAND_CMD_READID:
-		info->buf_count = host->read_id_bytes;
+		info->buf_count = READ_ID_BYTES;
 		info->ndcb0 |= NDCB0_CMD_TYPE(3)
 				| NDCB0_ADDR_CYC(1)
 				| command;
@@ -1247,9 +1259,6 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
 		return -EINVAL;
 	}
 
-	/* calculate flash information */
-	host->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
-
 	/* calculate addressing information */
 	host->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
 
@@ -1265,7 +1274,7 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
 	ndcr |= (f->flash_width == 16) ? NDCR_DWIDTH_M : 0;
 	ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
 
-	ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes);
+	ndcr |= NDCR_RD_ID_CNT(READ_ID_BYTES);
 	ndcr |= NDCR_SPARE_EN; /* enable spare by default */
 
 	info->reg_ndcr = ndcr;
@@ -1276,23 +1285,10 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
 
 static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
 {
-	/*
-	 * We set 0 by hard coding here, for we don't support keep_config
-	 * when there is more than one chip attached to the controller
-	 */
-	struct pxa3xx_nand_host *host = info->host[0];
 	uint32_t ndcr = nand_readl(info, NDCR);
 
-	if (ndcr & NDCR_PAGE_SZ) {
-		/* Controller's FIFO size */
-		info->chunk_size = 2048;
-		host->read_id_bytes = 4;
-	} else {
-		info->chunk_size = 512;
-		host->read_id_bytes = 2;
-	}
-
 	/* Set an initial chunk size */
+	info->chunk_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
 	info->reg_ndcr = ndcr & ~NDCR_INT_MASK;
 	info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
 	info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
@@ -1473,6 +1469,9 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
 	if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
 		goto KEEP_CONFIG;
 
+	/* Set a default chunk size */
+	info->chunk_size = 512;
+
 	ret = pxa3xx_nand_sensing(info);
 	if (ret) {
 		dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index 77e96d2df96c..cc6bac537f5a 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -466,7 +466,7 @@ static int r852_ecc_calculate(struct mtd_info *mtd, const uint8_t *dat,
 static int r852_ecc_correct(struct mtd_info *mtd, uint8_t *dat,
 				uint8_t *read_ecc, uint8_t *calc_ecc)
 {
-	uint16_t ecc_reg;
+	uint32_t ecc_reg;
 	uint8_t ecc_status, err_byte;
 	int i, error = 0;
 
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index 6f93b2990d25..f97a58d6aae1 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -99,6 +99,15 @@
 				 NFC_CMD_INT_ENABLE | \
 				 NFC_DMA_INT_ENABLE)
 
+/* define bit use in NFC_TIMING_CTL */
+#define NFC_TIMING_CTL_EDO	BIT(8)
+
+/* define NFC_TIMING_CFG register layout */
+#define NFC_TIMING_CFG(tWB, tADL, tWHR, tRHW, tCAD)		\
+	(((tWB) & 0x3) | (((tADL) & 0x3) << 2) |		\
+	(((tWHR) & 0x3) << 4) | (((tRHW) & 0x3) << 6) |		\
+	(((tCAD) & 0x7) << 8))
+
 /* define bit use in NFC_CMD */
 #define NFC_CMD_LOW_BYTE	GENMASK(7, 0)
 #define NFC_CMD_HIGH_BYTE	GENMASK(15, 8)
@@ -208,6 +217,7 @@ struct sunxi_nand_hw_ecc {
  * @nand:		base NAND chip structure
  * @mtd:		base MTD structure
  * @clk_rate:		clk_rate required for this NAND chip
+ * @timing_cfg		TIMING_CFG register value for this NAND chip
  * @selected:		current active CS
  * @nsels:		number of CS lines required by the NAND chip
  * @sels:		array of CS lines descriptions
@@ -217,6 +227,8 @@ struct sunxi_nand_chip {
 	struct nand_chip nand;
 	struct mtd_info mtd;
 	unsigned long clk_rate;
+	u32 timing_cfg;
+	u32 timing_ctl;
 	int selected;
 	int nsels;
 	struct sunxi_nand_chip_sel sels[0];
@@ -403,6 +415,8 @@ static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip)
 		}
 	}
 
+	writel(sunxi_nand->timing_ctl, nfc->regs + NFC_REG_TIMING_CTL);
+	writel(sunxi_nand->timing_cfg, nfc->regs + NFC_REG_TIMING_CFG);
 	writel(ctl, nfc->regs + NFC_REG_CTL);
 
 	sunxi_nand->selected = chip;
@@ -807,10 +821,33 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd,
 	return 0;
 }
 
+static const s32 tWB_lut[] = {6, 12, 16, 20};
+static const s32 tRHW_lut[] = {4, 8, 12, 20};
+
+static int _sunxi_nand_lookup_timing(const s32 *lut, int lut_size, u32 duration,
+		u32 clk_period)
+{
+	u32 clk_cycles = DIV_ROUND_UP(duration, clk_period);
+	int i;
+
+	for (i = 0; i < lut_size; i++) {
+		if (clk_cycles <= lut[i])
+			return i;
+	}
+
+	/* Doesn't fit */
+	return -EINVAL;
+}
+
+#define sunxi_nand_lookup_timing(l, p, c) \
+			_sunxi_nand_lookup_timing(l, ARRAY_SIZE(l), p, c)
+
 static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
 				       const struct nand_sdr_timings *timings)
 {
+	struct sunxi_nfc *nfc = to_sunxi_nfc(chip->nand.controller);
 	u32 min_clk_period = 0;
+	s32 tWB, tADL, tWHR, tRHW, tCAD;
 
 	/* T1 <=> tCLS */
 	if (timings->tCLS_min > min_clk_period)
@@ -872,6 +909,48 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
 	if (timings->tWC_min > (min_clk_period * 2))
 		min_clk_period = DIV_ROUND_UP(timings->tWC_min, 2);
 
+	/* T16 - T19 + tCAD */
+	tWB  = sunxi_nand_lookup_timing(tWB_lut, timings->tWB_max,
+					min_clk_period);
+	if (tWB < 0) {
+		dev_err(nfc->dev, "unsupported tWB\n");
+		return tWB;
+	}
+
+	tADL = DIV_ROUND_UP(timings->tADL_min, min_clk_period) >> 3;
+	if (tADL > 3) {
+		dev_err(nfc->dev, "unsupported tADL\n");
+		return -EINVAL;
+	}
+
+	tWHR = DIV_ROUND_UP(timings->tWHR_min, min_clk_period) >> 3;
+	if (tWHR > 3) {
+		dev_err(nfc->dev, "unsupported tWHR\n");
+		return -EINVAL;
+	}
+
+	tRHW = sunxi_nand_lookup_timing(tRHW_lut, timings->tRHW_min,
+					min_clk_period);
+	if (tRHW < 0) {
+		dev_err(nfc->dev, "unsupported tRHW\n");
+		return tRHW;
+	}
+
+	/*
+	 * TODO: according to ONFI specs this value only applies for DDR NAND,
+	 * but Allwinner seems to set this to 0x7. Mimic them for now.
+	 */
+	tCAD = 0x7;
+
+	/* TODO: A83 has some more bits for CDQSS, CS, CLHZ, CCS, WC */
+	chip->timing_cfg = NFC_TIMING_CFG(tWB, tADL, tWHR, tRHW, tCAD);
+
+	/*
+	 * ONFI specification 3.1, paragraph 4.15.2 dictates that EDO data
+	 * output cycle timings shall be used if the host drives tRC less than
+	 * 30 ns.
+	 */
+	chip->timing_ctl = (timings->tRC_min < 30000) ? NFC_TIMING_CTL_EDO : 0;
 
 	/* Convert min_clk_period from picoseconds to nanoseconds */
 	min_clk_period = DIV_ROUND_UP(min_clk_period, 1000);
@@ -884,8 +963,6 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
 	 */
 	chip->clk_rate = (2 * NSEC_PER_SEC) / min_clk_period;
 
-	/* TODO: configure T16-T19 */
-
 	return 0;
 }
 
@@ -1376,13 +1453,6 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, nfc);
 
-	/*
-	 * TODO: replace these magic values with proper flags as soon as we
-	 * know what they are encoding.
-	 */
-	writel(0x100, nfc->regs + NFC_REG_TIMING_CTL);
-	writel(0x7ff, nfc->regs + NFC_REG_TIMING_CFG);
-
 	ret = sunxi_nand_chips_init(dev, nfc);
 	if (ret) {
 		dev_err(dev, "failed to init nand chips\n");
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 64a4f0edabc7..89bf4c1faa2b 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -26,6 +26,18 @@ config SPI_FSL_QUADSPI
 	depends on ARCH_MXC
 	help
 	  This enables support for the Quad SPI controller in master mode.
-	  We only connect the NOR to this controller now.
+	  This controller does not support generic SPI. It only supports
+	  SPI NOR.
+
+config SPI_NXP_SPIFI
+	tristate "NXP SPI Flash Interface (SPIFI)"
+	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+	depends on HAS_IOMEM
+	help
+	  Enable support for the NXP LPC SPI Flash Interface controller.
+
+	  SPIFI is a specialized controller for connecting serial SPI
+	  Flash. Enable this option if you have a device with a SPIFI
+	  controller and want to access the Flash as a mtd device.
 
 endif # MTD_SPI_NOR
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index 6a7ce1462247..e53333ef8582 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
 obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-quadspi.o
+obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 52a872fa1b6e..d32b7e04ccca 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -26,6 +26,20 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/spi-nor.h>
+#include <linux/mutex.h>
+#include <linux/pm_qos.h>
+
+/* Controller needs driver to swap endian */
+#define QUADSPI_QUIRK_SWAP_ENDIAN	(1 << 0)
+/* Controller needs 4x internal clock */
+#define QUADSPI_QUIRK_4X_INT_CLK	(1 << 1)
+/*
+ * TKT253890, Controller needs driver to fill txfifo till 16 byte to
+ * trigger data transfer even though extern data will not transferred.
+ */
+#define QUADSPI_QUIRK_TKT253890		(1 << 2)
+/* Controller cannot wake up from wait mode, TKT245618 */
+#define QUADSPI_QUIRK_TKT245618         (1 << 3)
 
 /* The registers */
 #define QUADSPI_MCR			0x00
@@ -191,9 +205,13 @@
 #define SEQID_EN4B		10
 #define SEQID_BRWR		11
 
+#define QUADSPI_MIN_IOMAP SZ_4M
+
 enum fsl_qspi_devtype {
 	FSL_QUADSPI_VYBRID,
 	FSL_QUADSPI_IMX6SX,
+	FSL_QUADSPI_IMX7D,
+	FSL_QUADSPI_IMX6UL,
 };
 
 struct fsl_qspi_devtype_data {
@@ -201,20 +219,42 @@ struct fsl_qspi_devtype_data {
 	int rxfifo;
 	int txfifo;
 	int ahb_buf_size;
+	int driver_data;
 };
 
 static struct fsl_qspi_devtype_data vybrid_data = {
 	.devtype = FSL_QUADSPI_VYBRID,
 	.rxfifo = 128,
 	.txfifo = 64,
-	.ahb_buf_size = 1024
+	.ahb_buf_size = 1024,
+	.driver_data = QUADSPI_QUIRK_SWAP_ENDIAN,
 };
 
 static struct fsl_qspi_devtype_data imx6sx_data = {
 	.devtype = FSL_QUADSPI_IMX6SX,
 	.rxfifo = 128,
 	.txfifo = 512,
-	.ahb_buf_size = 1024
+	.ahb_buf_size = 1024,
+	.driver_data = QUADSPI_QUIRK_4X_INT_CLK
+		       | QUADSPI_QUIRK_TKT245618,
+};
+
+static struct fsl_qspi_devtype_data imx7d_data = {
+	.devtype = FSL_QUADSPI_IMX7D,
+	.rxfifo = 512,
+	.txfifo = 512,
+	.ahb_buf_size = 1024,
+	.driver_data = QUADSPI_QUIRK_TKT253890
+		       | QUADSPI_QUIRK_4X_INT_CLK,
+};
+
+static struct fsl_qspi_devtype_data imx6ul_data = {
+	.devtype = FSL_QUADSPI_IMX6UL,
+	.rxfifo = 128,
+	.txfifo = 512,
+	.ahb_buf_size = 1024,
+	.driver_data = QUADSPI_QUIRK_TKT253890
+		       | QUADSPI_QUIRK_4X_INT_CLK,
 };
 
 #define FSL_QSPI_MAX_CHIP	4
@@ -222,8 +262,10 @@ struct fsl_qspi {
 	struct mtd_info mtd[FSL_QSPI_MAX_CHIP];
 	struct spi_nor nor[FSL_QSPI_MAX_CHIP];
 	void __iomem *iobase;
-	void __iomem *ahb_base; /* Used when read from AHB bus */
+	void __iomem *ahb_addr;
 	u32 memmap_phy;
+	u32 memmap_offs;
+	u32 memmap_len;
 	struct clk *clk, *clk_en;
 	struct device *dev;
 	struct completion c;
@@ -233,16 +275,28 @@ struct fsl_qspi {
 	u32 clk_rate;
 	unsigned int chip_base_addr; /* We may support two chips. */
 	bool has_second_chip;
+	struct mutex lock;
+	struct pm_qos_request pm_qos_req;
 };
 
-static inline int is_vybrid_qspi(struct fsl_qspi *q)
+static inline int needs_swap_endian(struct fsl_qspi *q)
+{
+	return q->devtype_data->driver_data & QUADSPI_QUIRK_SWAP_ENDIAN;
+}
+
+static inline int needs_4x_clock(struct fsl_qspi *q)
+{
+	return q->devtype_data->driver_data & QUADSPI_QUIRK_4X_INT_CLK;
+}
+
+static inline int needs_fill_txfifo(struct fsl_qspi *q)
 {
-	return q->devtype_data->devtype == FSL_QUADSPI_VYBRID;
+	return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT253890;
 }
 
-static inline int is_imx6sx_qspi(struct fsl_qspi *q)
+static inline int needs_wakeup_wait_mode(struct fsl_qspi *q)
 {
-	return q->devtype_data->devtype == FSL_QUADSPI_IMX6SX;
+	return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT245618;
 }
 
 /*
@@ -251,7 +305,7 @@ static inline int is_imx6sx_qspi(struct fsl_qspi *q)
  */
 static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a)
 {
-	return is_vybrid_qspi(q) ? __swab32(a) : a;
+	return needs_swap_endian(q) ? __swab32(a) : a;
 }
 
 static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q)
@@ -343,14 +397,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 	/* Erase a sector */
 	lut_base = SEQID_SE * 4;
 
-	if (q->nor_size <= SZ_16M) {
-		cmd = SPINOR_OP_SE;
-		addrlen = ADDR24BIT;
-	} else {
-		/* use the 4-byte address */
-		cmd = SPINOR_OP_SE;
-		addrlen = ADDR32BIT;
-	}
+	cmd = q->nor[0].erase_opcode;
+	addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT;
 
 	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
 			base + QUADSPI_LUT(lut_base));
@@ -419,6 +467,8 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
 	case SPINOR_OP_BRWR:
 		return SEQID_BRWR;
 	default:
+		if (cmd == q->nor[0].erase_opcode)
+			return SEQID_SE;
 		dev_err(q->dev, "Unsupported cmd 0x%.2x\n", cmd);
 		break;
 	}
@@ -537,7 +587,7 @@ static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
 
 	/* clear the TX FIFO. */
 	tmp = readl(q->iobase + QUADSPI_MCR);
-	writel(tmp | QUADSPI_MCR_CLR_RXF_MASK, q->iobase + QUADSPI_MCR);
+	writel(tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR);
 
 	/* fill the TX data to the FIFO */
 	for (j = 0, i = ((count + 3) / 4); j < i; j++) {
@@ -546,6 +596,11 @@ static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
 		txbuf++;
 	}
 
+	/* fill the TXFIFO upto 16 bytes for i.MX7d */
+	if (needs_fill_txfifo(q))
+		for (; i < 4; i++)
+			writel(tmp, q->iobase + QUADSPI_TBDR);
+
 	/* Trigger it */
 	ret = fsl_qspi_runcmd(q, opcode, to, count);
 
@@ -606,6 +661,38 @@ static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
 		q->iobase + QUADSPI_BFGENCR);
 }
 
+/* This function was used to prepare and enable QSPI clock */
+static int fsl_qspi_clk_prep_enable(struct fsl_qspi *q)
+{
+	int ret;
+
+	ret = clk_prepare_enable(q->clk_en);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(q->clk);
+	if (ret) {
+		clk_disable_unprepare(q->clk_en);
+		return ret;
+	}
+
+	if (needs_wakeup_wait_mode(q))
+		pm_qos_add_request(&q->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, 0);
+
+	return 0;
+}
+
+/* This function was used to disable and unprepare QSPI clock */
+static void fsl_qspi_clk_disable_unprep(struct fsl_qspi *q)
+{
+	if (needs_wakeup_wait_mode(q))
+		pm_qos_remove_request(&q->pm_qos_req);
+
+	clk_disable_unprepare(q->clk);
+	clk_disable_unprepare(q->clk_en);
+
+}
+
 /* We use this function to do some basic init for spi_nor_scan(). */
 static int fsl_qspi_nor_setup(struct fsl_qspi *q)
 {
@@ -613,11 +700,23 @@ static int fsl_qspi_nor_setup(struct fsl_qspi *q)
 	u32 reg;
 	int ret;
 
-	/* the default frequency, we will change it in the future.*/
+	/* disable and unprepare clock to avoid glitch pass to controller */
+	fsl_qspi_clk_disable_unprep(q);
+
+	/* the default frequency, we will change it in the future. */
 	ret = clk_set_rate(q->clk, 66000000);
 	if (ret)
 		return ret;
 
+	ret = fsl_qspi_clk_prep_enable(q);
+	if (ret)
+		return ret;
+
+	/* Reset the module */
+	writel(QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK,
+		base + QUADSPI_MCR);
+	udelay(1);
+
 	/* Init the LUT table. */
 	fsl_qspi_init_lut(q);
 
@@ -635,6 +734,9 @@ static int fsl_qspi_nor_setup(struct fsl_qspi *q)
 	writel(QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK,
 			base + QUADSPI_MCR);
 
+	/* clear all interrupt status */
+	writel(0xffffffff, q->iobase + QUADSPI_FR);
+
 	/* enable the interrupt */
 	writel(QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER);
 
@@ -646,13 +748,20 @@ static int fsl_qspi_nor_setup_last(struct fsl_qspi *q)
 	unsigned long rate = q->clk_rate;
 	int ret;
 
-	if (is_imx6sx_qspi(q))
+	if (needs_4x_clock(q))
 		rate *= 4;
 
+	/* disable and unprepare clock to avoid glitch pass to controller */
+	fsl_qspi_clk_disable_unprep(q);
+
 	ret = clk_set_rate(q->clk, rate);
 	if (ret)
 		return ret;
 
+	ret = fsl_qspi_clk_prep_enable(q);
+	if (ret)
+		return ret;
+
 	/* Init the LUT table again. */
 	fsl_qspi_init_lut(q);
 
@@ -665,6 +774,8 @@ static int fsl_qspi_nor_setup_last(struct fsl_qspi *q)
 static const struct of_device_id fsl_qspi_dt_ids[] = {
 	{ .compatible = "fsl,vf610-qspi", .data = (void *)&vybrid_data, },
 	{ .compatible = "fsl,imx6sx-qspi", .data = (void *)&imx6sx_data, },
+	{ .compatible = "fsl,imx7d-qspi", .data = (void *)&imx7d_data, },
+	{ .compatible = "fsl,imx6ul-qspi", .data = (void *)&imx6ul_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
@@ -730,11 +841,42 @@ static int fsl_qspi_read(struct spi_nor *nor, loff_t from,
 	struct fsl_qspi *q = nor->priv;
 	u8 cmd = nor->read_opcode;
 
-	dev_dbg(q->dev, "cmd [%x],read from (0x%p, 0x%.8x, 0x%.8x),len:%d\n",
-		cmd, q->ahb_base, q->chip_base_addr, (unsigned int)from, len);
+	/* if necessary,ioremap buffer before AHB read, */
+	if (!q->ahb_addr) {
+		q->memmap_offs = q->chip_base_addr + from;
+		q->memmap_len = len > QUADSPI_MIN_IOMAP ? len : QUADSPI_MIN_IOMAP;
+
+		q->ahb_addr = ioremap_nocache(
+				q->memmap_phy + q->memmap_offs,
+				q->memmap_len);
+		if (!q->ahb_addr) {
+			dev_err(q->dev, "ioremap failed\n");
+			return -ENOMEM;
+		}
+	/* ioremap if the data requested is out of range */
+	} else if (q->chip_base_addr + from < q->memmap_offs
+			|| q->chip_base_addr + from + len >
+			q->memmap_offs + q->memmap_len) {
+		iounmap(q->ahb_addr);
+
+		q->memmap_offs = q->chip_base_addr + from;
+		q->memmap_len = len > QUADSPI_MIN_IOMAP ? len : QUADSPI_MIN_IOMAP;
+		q->ahb_addr = ioremap_nocache(
+				q->memmap_phy + q->memmap_offs,
+				q->memmap_len);
+		if (!q->ahb_addr) {
+			dev_err(q->dev, "ioremap failed\n");
+			return -ENOMEM;
+		}
+	}
+
+	dev_dbg(q->dev, "cmd [%x],read from 0x%p, len:%d\n",
+		cmd, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs,
+		len);
 
 	/* Read out the data directly from the AHB buffer.*/
-	memcpy(buf, q->ahb_base + q->chip_base_addr + from, len);
+	memcpy(buf, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs,
+		len);
 
 	*retlen += len;
 	return 0;
@@ -761,26 +903,26 @@ static int fsl_qspi_prep(struct spi_nor *nor, enum spi_nor_ops ops)
 	struct fsl_qspi *q = nor->priv;
 	int ret;
 
-	ret = clk_enable(q->clk_en);
-	if (ret)
-		return ret;
+	mutex_lock(&q->lock);
 
-	ret = clk_enable(q->clk);
-	if (ret) {
-		clk_disable(q->clk_en);
-		return ret;
-	}
+	ret = fsl_qspi_clk_prep_enable(q);
+	if (ret)
+		goto err_mutex;
 
 	fsl_qspi_set_base_addr(q, nor);
 	return 0;
+
+err_mutex:
+	mutex_unlock(&q->lock);
+	return ret;
 }
 
 static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
 {
 	struct fsl_qspi *q = nor->priv;
 
-	clk_disable(q->clk);
-	clk_disable(q->clk_en);
+	fsl_qspi_clk_disable_unprep(q);
+	mutex_unlock(&q->lock);
 }
 
 static int fsl_qspi_probe(struct platform_device *pdev)
@@ -804,6 +946,10 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 	if (!q->nor_num || q->nor_num > FSL_QSPI_MAX_CHIP)
 		return -ENODEV;
 
+	q->dev = dev;
+	q->devtype_data = (struct fsl_qspi_devtype_data *)of_id->data;
+	platform_set_drvdata(pdev, q);
+
 	/* find the resources */
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI");
 	q->iobase = devm_ioremap_resource(dev, res);
@@ -812,9 +958,11 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					"QuadSPI-memory");
-	q->ahb_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(q->ahb_base))
-		return PTR_ERR(q->ahb_base);
+	if (!devm_request_mem_region(dev, res->start, resource_size(res),
+				     res->name)) {
+		dev_err(dev, "can't request region for resource %pR\n", res);
+		return -EBUSY;
+	}
 
 	q->memmap_phy = res->start;
 
@@ -827,15 +975,9 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 	if (IS_ERR(q->clk))
 		return PTR_ERR(q->clk);
 
-	ret = clk_prepare_enable(q->clk_en);
-	if (ret) {
-		dev_err(dev, "cannot enable the qspi_en clock: %d\n", ret);
-		return ret;
-	}
-
-	ret = clk_prepare_enable(q->clk);
+	ret = fsl_qspi_clk_prep_enable(q);
 	if (ret) {
-		dev_err(dev, "cannot enable the qspi clock: %d\n", ret);
+		dev_err(dev, "can not enable the clock\n");
 		goto clk_failed;
 	}
 
@@ -853,10 +995,6 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 		goto irq_failed;
 	}
 
-	q->dev = dev;
-	q->devtype_data = (struct fsl_qspi_devtype_data *)of_id->data;
-	platform_set_drvdata(pdev, q);
-
 	ret = fsl_qspi_nor_setup(q);
 	if (ret)
 		goto irq_failed;
@@ -864,6 +1002,8 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 	if (of_get_property(np, "fsl,qspi-has-second-chip", NULL))
 		q->has_second_chip = true;
 
+	mutex_init(&q->lock);
+
 	/* iterate the subnodes. */
 	for_each_available_child_of_node(dev->of_node, np) {
 		char modalias[40];
@@ -892,24 +1032,24 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 
 		ret = of_modalias_node(np, modalias, sizeof(modalias));
 		if (ret < 0)
-			goto irq_failed;
+			goto mutex_failed;
 
 		ret = of_property_read_u32(np, "spi-max-frequency",
 				&q->clk_rate);
 		if (ret < 0)
-			goto irq_failed;
+			goto mutex_failed;
 
 		/* set the chip address for READID */
 		fsl_qspi_set_base_addr(q, nor);
 
 		ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD);
 		if (ret)
-			goto irq_failed;
+			goto mutex_failed;
 
 		ppdata.of_node = np;
 		ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
 		if (ret)
-			goto irq_failed;
+			goto mutex_failed;
 
 		/* Set the correct NOR size now. */
 		if (q->nor_size == 0) {
@@ -939,8 +1079,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 	if (ret)
 		goto last_init_failed;
 
-	clk_disable(q->clk);
-	clk_disable(q->clk_en);
+	fsl_qspi_clk_disable_unprep(q);
 	return 0;
 
 last_init_failed:
@@ -950,10 +1089,12 @@ last_init_failed:
 			i *= 2;
 		mtd_device_unregister(&q->mtd[i]);
 	}
+mutex_failed:
+	mutex_destroy(&q->lock);
 irq_failed:
-	clk_disable_unprepare(q->clk);
+	fsl_qspi_clk_disable_unprep(q);
 clk_failed:
-	clk_disable_unprepare(q->clk_en);
+	dev_err(dev, "Freescale QuadSPI probe failed\n");
 	return ret;
 }
 
@@ -973,8 +1114,11 @@ static int fsl_qspi_remove(struct platform_device *pdev)
 	writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
 	writel(0x0, q->iobase + QUADSPI_RSER);
 
-	clk_unprepare(q->clk);
-	clk_unprepare(q->clk_en);
+	mutex_destroy(&q->lock);
+
+	if (q->ahb_addr)
+		iounmap(q->ahb_addr);
+
 	return 0;
 }
 
@@ -985,12 +1129,19 @@ static int fsl_qspi_suspend(struct platform_device *pdev, pm_message_t state)
 
 static int fsl_qspi_resume(struct platform_device *pdev)
 {
+	int ret;
 	struct fsl_qspi *q = platform_get_drvdata(pdev);
 
+	ret = fsl_qspi_clk_prep_enable(q);
+	if (ret)
+		return ret;
+
 	fsl_qspi_nor_setup(q);
 	fsl_qspi_set_map_addr(q);
 	fsl_qspi_nor_setup_last(q);
 
+	fsl_qspi_clk_disable_unprep(q);
+
 	return 0;
 }
 
diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c
new file mode 100644
index 000000000000..9ad1dd0896c0
--- /dev/null
+++ b/drivers/mtd/spi-nor/nxp-spifi.c
@@ -0,0 +1,482 @@
+/*
+ * SPI-NOR driver for NXP SPI Flash Interface (SPIFI)
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on Freescale QuadSPI driver:
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+/* NXP SPIFI registers, bits and macros */
+#define SPIFI_CTRL				0x000
+#define  SPIFI_CTRL_TIMEOUT(timeout)		(timeout)
+#define  SPIFI_CTRL_CSHIGH(cshigh)		((cshigh) << 16)
+#define  SPIFI_CTRL_MODE3			BIT(23)
+#define  SPIFI_CTRL_DUAL			BIT(28)
+#define  SPIFI_CTRL_FBCLK			BIT(30)
+#define SPIFI_CMD				0x004
+#define  SPIFI_CMD_DATALEN(dlen)		((dlen) & 0x3fff)
+#define  SPIFI_CMD_DOUT				BIT(15)
+#define  SPIFI_CMD_INTLEN(ilen)			((ilen) << 16)
+#define  SPIFI_CMD_FIELDFORM(field)		((field) << 19)
+#define  SPIFI_CMD_FIELDFORM_ALL_SERIAL		SPIFI_CMD_FIELDFORM(0x0)
+#define  SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA	SPIFI_CMD_FIELDFORM(0x1)
+#define  SPIFI_CMD_FRAMEFORM(frame)		((frame) << 21)
+#define  SPIFI_CMD_FRAMEFORM_OPCODE_ONLY	SPIFI_CMD_FRAMEFORM(0x1)
+#define  SPIFI_CMD_OPCODE(op)			((op) << 24)
+#define SPIFI_ADDR				0x008
+#define SPIFI_IDATA				0x00c
+#define SPIFI_CLIMIT				0x010
+#define SPIFI_DATA				0x014
+#define SPIFI_MCMD				0x018
+#define SPIFI_STAT				0x01c
+#define  SPIFI_STAT_MCINIT			BIT(0)
+#define  SPIFI_STAT_CMD				BIT(1)
+#define  SPIFI_STAT_RESET			BIT(4)
+
+#define SPI_NOR_MAX_ID_LEN	6
+
+struct nxp_spifi {
+	struct device *dev;
+	struct clk *clk_spifi;
+	struct clk *clk_reg;
+	void __iomem *io_base;
+	void __iomem *flash_base;
+	struct mtd_info mtd;
+	struct spi_nor nor;
+	bool memory_mode;
+	u32 mcmd;
+};
+
+static int nxp_spifi_wait_for_cmd(struct nxp_spifi *spifi)
+{
+	u8 stat;
+	int ret;
+
+	ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
+				 !(stat & SPIFI_STAT_CMD), 10, 30);
+	if (ret)
+		dev_warn(spifi->dev, "command timed out\n");
+
+	return ret;
+}
+
+static int nxp_spifi_reset(struct nxp_spifi *spifi)
+{
+	u8 stat;
+	int ret;
+
+	writel(SPIFI_STAT_RESET, spifi->io_base + SPIFI_STAT);
+	ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
+				 !(stat & SPIFI_STAT_RESET), 10, 30);
+	if (ret)
+		dev_warn(spifi->dev, "state reset timed out\n");
+
+	return ret;
+}
+
+static int nxp_spifi_set_memory_mode_off(struct nxp_spifi *spifi)
+{
+	int ret;
+
+	if (!spifi->memory_mode)
+		return 0;
+
+	ret = nxp_spifi_reset(spifi);
+	if (ret)
+		dev_err(spifi->dev, "unable to enter command mode\n");
+	else
+		spifi->memory_mode = false;
+
+	return ret;
+}
+
+static int nxp_spifi_set_memory_mode_on(struct nxp_spifi *spifi)
+{
+	u8 stat;
+	int ret;
+
+	if (spifi->memory_mode)
+		return 0;
+
+	writel(spifi->mcmd, spifi->io_base + SPIFI_MCMD);
+	ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
+				 stat & SPIFI_STAT_MCINIT, 10, 30);
+	if (ret)
+		dev_err(spifi->dev, "unable to enter memory mode\n");
+	else
+		spifi->memory_mode = true;
+
+	return ret;
+}
+
+static int nxp_spifi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
+{
+	struct nxp_spifi *spifi = nor->priv;
+	u32 cmd;
+	int ret;
+
+	ret = nxp_spifi_set_memory_mode_off(spifi);
+	if (ret)
+		return ret;
+
+	cmd = SPIFI_CMD_DATALEN(len) |
+	      SPIFI_CMD_OPCODE(opcode) |
+	      SPIFI_CMD_FIELDFORM_ALL_SERIAL |
+	      SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
+	writel(cmd, spifi->io_base + SPIFI_CMD);
+
+	while (len--)
+		*buf++ = readb(spifi->io_base + SPIFI_DATA);
+
+	return nxp_spifi_wait_for_cmd(spifi);
+}
+
+static int nxp_spifi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
+			       int len, int write_enable)
+{
+	struct nxp_spifi *spifi = nor->priv;
+	u32 cmd;
+	int ret;
+
+	ret = nxp_spifi_set_memory_mode_off(spifi);
+	if (ret)
+		return ret;
+
+	cmd = SPIFI_CMD_DOUT |
+	      SPIFI_CMD_DATALEN(len) |
+	      SPIFI_CMD_OPCODE(opcode) |
+	      SPIFI_CMD_FIELDFORM_ALL_SERIAL |
+	      SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
+	writel(cmd, spifi->io_base + SPIFI_CMD);
+
+	while (len--)
+		writeb(*buf++, spifi->io_base + SPIFI_DATA);
+
+	return nxp_spifi_wait_for_cmd(spifi);
+}
+
+static int nxp_spifi_read(struct spi_nor *nor, loff_t from, size_t len,
+			  size_t *retlen, u_char *buf)
+{
+	struct nxp_spifi *spifi = nor->priv;
+	int ret;
+
+	ret = nxp_spifi_set_memory_mode_on(spifi);
+	if (ret)
+		return ret;
+
+	memcpy_fromio(buf, spifi->flash_base + from, len);
+	*retlen += len;
+
+	return 0;
+}
+
+static void nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len,
+			    size_t *retlen, const u_char *buf)
+{
+	struct nxp_spifi *spifi = nor->priv;
+	u32 cmd;
+	int ret;
+
+	ret = nxp_spifi_set_memory_mode_off(spifi);
+	if (ret)
+		return;
+
+	writel(to, spifi->io_base + SPIFI_ADDR);
+	*retlen += len;
+
+	cmd = SPIFI_CMD_DOUT |
+	      SPIFI_CMD_DATALEN(len) |
+	      SPIFI_CMD_FIELDFORM_ALL_SERIAL |
+	      SPIFI_CMD_OPCODE(nor->program_opcode) |
+	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+	writel(cmd, spifi->io_base + SPIFI_CMD);
+
+	while (len--)
+		writeb(*buf++, spifi->io_base + SPIFI_DATA);
+
+	nxp_spifi_wait_for_cmd(spifi);
+}
+
+static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs)
+{
+	struct nxp_spifi *spifi = nor->priv;
+	u32 cmd;
+	int ret;
+
+	ret = nxp_spifi_set_memory_mode_off(spifi);
+	if (ret)
+		return ret;
+
+	writel(offs, spifi->io_base + SPIFI_ADDR);
+
+	cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL |
+	      SPIFI_CMD_OPCODE(nor->erase_opcode) |
+	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+	writel(cmd, spifi->io_base + SPIFI_CMD);
+
+	return nxp_spifi_wait_for_cmd(spifi);
+}
+
+static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi)
+{
+	switch (spifi->nor.flash_read) {
+	case SPI_NOR_NORMAL:
+	case SPI_NOR_FAST:
+		spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL;
+		break;
+	case SPI_NOR_DUAL:
+	case SPI_NOR_QUAD:
+		spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA;
+		break;
+	default:
+		dev_err(spifi->dev, "unsupported SPI read mode\n");
+		return -EINVAL;
+	}
+
+	/* Memory mode supports address length between 1 and 4 */
+	if (spifi->nor.addr_width < 1 || spifi->nor.addr_width > 4)
+		return -EINVAL;
+
+	spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) |
+		       SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) |
+		       SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+
+	return 0;
+}
+
+static void nxp_spifi_dummy_id_read(struct spi_nor *nor)
+{
+	u8 id[SPI_NOR_MAX_ID_LEN];
+	nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
+}
+
+static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
+				 struct device_node *np)
+{
+	struct mtd_part_parser_data ppdata;
+	enum read_mode flash_read;
+	u32 ctrl, property;
+	u16 mode = 0;
+	int ret;
+
+	if (!of_property_read_u32(np, "spi-rx-bus-width", &property)) {
+		switch (property) {
+		case 1:
+			break;
+		case 2:
+			mode |= SPI_RX_DUAL;
+			break;
+		case 4:
+			mode |= SPI_RX_QUAD;
+			break;
+		default:
+			dev_err(spifi->dev, "unsupported rx-bus-width\n");
+			return -EINVAL;
+		}
+	}
+
+	if (of_find_property(np, "spi-cpha", NULL))
+		mode |= SPI_CPHA;
+
+	if (of_find_property(np, "spi-cpol", NULL))
+		mode |= SPI_CPOL;
+
+	/* Setup control register defaults */
+	ctrl = SPIFI_CTRL_TIMEOUT(1000) |
+	       SPIFI_CTRL_CSHIGH(15) |
+	       SPIFI_CTRL_FBCLK;
+
+	if (mode & SPI_RX_DUAL) {
+		ctrl |= SPIFI_CTRL_DUAL;
+		flash_read = SPI_NOR_DUAL;
+	} else if (mode & SPI_RX_QUAD) {
+		ctrl &= ~SPIFI_CTRL_DUAL;
+		flash_read = SPI_NOR_QUAD;
+	} else {
+		ctrl |= SPIFI_CTRL_DUAL;
+		flash_read = SPI_NOR_NORMAL;
+	}
+
+	switch (mode & (SPI_CPHA | SPI_CPOL)) {
+	case SPI_MODE_0:
+		ctrl &= ~SPIFI_CTRL_MODE3;
+		break;
+	case SPI_MODE_3:
+		ctrl |= SPIFI_CTRL_MODE3;
+		break;
+	default:
+		dev_err(spifi->dev, "only mode 0 and 3 supported\n");
+		return -EINVAL;
+	}
+
+	writel(ctrl, spifi->io_base + SPIFI_CTRL);
+
+	spifi->mtd.priv  = &spifi->nor;
+	spifi->nor.mtd   = &spifi->mtd;
+	spifi->nor.dev   = spifi->dev;
+	spifi->nor.priv  = spifi;
+	spifi->nor.read  = nxp_spifi_read;
+	spifi->nor.write = nxp_spifi_write;
+	spifi->nor.erase = nxp_spifi_erase;
+	spifi->nor.read_reg  = nxp_spifi_read_reg;
+	spifi->nor.write_reg = nxp_spifi_write_reg;
+
+	/*
+	 * The first read on a hard reset isn't reliable so do a
+	 * dummy read of the id before calling spi_nor_scan().
+	 * The reason for this problem is unknown.
+	 *
+	 * The official NXP spifilib uses more or less the same
+	 * workaround that is applied here by reading the device
+	 * id multiple times.
+	 */
+	nxp_spifi_dummy_id_read(&spifi->nor);
+
+	ret = spi_nor_scan(&spifi->nor, NULL, flash_read);
+	if (ret) {
+		dev_err(spifi->dev, "device scan failed\n");
+		return ret;
+	}
+
+	ret = nxp_spifi_setup_memory_cmd(spifi);
+	if (ret) {
+		dev_err(spifi->dev, "memory command setup failed\n");
+		return ret;
+	}
+
+	ppdata.of_node = np;
+	ret = mtd_device_parse_register(&spifi->mtd, NULL, &ppdata, NULL, 0);
+	if (ret) {
+		dev_err(spifi->dev, "mtd device parse failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int nxp_spifi_probe(struct platform_device *pdev)
+{
+	struct device_node *flash_np;
+	struct nxp_spifi *spifi;
+	struct resource *res;
+	int ret;
+
+	spifi = devm_kzalloc(&pdev->dev, sizeof(*spifi), GFP_KERNEL);
+	if (!spifi)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spifi");
+	spifi->io_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(spifi->io_base))
+		return PTR_ERR(spifi->io_base);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "flash");
+	spifi->flash_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(spifi->flash_base))
+		return PTR_ERR(spifi->flash_base);
+
+	spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi");
+	if (IS_ERR(spifi->clk_spifi)) {
+		dev_err(&pdev->dev, "spifi clock not found\n");
+		return PTR_ERR(spifi->clk_spifi);
+	}
+
+	spifi->clk_reg = devm_clk_get(&pdev->dev, "reg");
+	if (IS_ERR(spifi->clk_reg)) {
+		dev_err(&pdev->dev, "reg clock not found\n");
+		return PTR_ERR(spifi->clk_reg);
+	}
+
+	ret = clk_prepare_enable(spifi->clk_reg);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable reg clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(spifi->clk_spifi);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable spifi clock\n");
+		goto dis_clk_reg;
+	}
+
+	spifi->dev = &pdev->dev;
+	platform_set_drvdata(pdev, spifi);
+
+	/* Initialize and reset device */
+	nxp_spifi_reset(spifi);
+	writel(0, spifi->io_base + SPIFI_IDATA);
+	writel(0, spifi->io_base + SPIFI_MCMD);
+	nxp_spifi_reset(spifi);
+
+	flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
+	if (!flash_np) {
+		dev_err(&pdev->dev, "no SPI flash device to configure\n");
+		ret = -ENODEV;
+		goto dis_clks;
+	}
+
+	ret = nxp_spifi_setup_flash(spifi, flash_np);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to setup flash chip\n");
+		goto dis_clks;
+	}
+
+	return 0;
+
+dis_clks:
+	clk_disable_unprepare(spifi->clk_spifi);
+dis_clk_reg:
+	clk_disable_unprepare(spifi->clk_reg);
+	return ret;
+}
+
+static int nxp_spifi_remove(struct platform_device *pdev)
+{
+	struct nxp_spifi *spifi = platform_get_drvdata(pdev);
+
+	mtd_device_unregister(&spifi->mtd);
+	clk_disable_unprepare(spifi->clk_spifi);
+	clk_disable_unprepare(spifi->clk_reg);
+
+	return 0;
+}
+
+static const struct of_device_id nxp_spifi_match[] = {
+	{.compatible = "nxp,lpc1773-spifi"},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, nxp_spifi_match);
+
+static struct platform_driver nxp_spifi_driver = {
+	.probe	= nxp_spifi_probe,
+	.remove	= nxp_spifi_remove,
+	.driver	= {
+		.name = "nxp-spifi",
+		.of_match_table = nxp_spifi_match,
+	},
+};
+module_platform_driver(nxp_spifi_driver);
+
+MODULE_DESCRIPTION("NXP SPI Flash Interface driver");
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index d78831b4422b..c27d427fead4 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -29,6 +29,8 @@
 #define SPI_NOR_MAX_ID_LEN	6
 
 struct flash_info {
+	char		*name;
+
 	/*
 	 * This array stores the ID bytes.
 	 * The first three bytes are the JEDIC ID.
@@ -59,7 +61,7 @@ struct flash_info {
 
 #define JEDEC_MFR(info)	((info)->id[0])
 
-static const struct spi_device_id *spi_nor_match_id(const char *name);
+static const struct flash_info *spi_nor_match_id(const char *name);
 
 /*
  * Read the status register, returning its value in the location
@@ -169,7 +171,7 @@ static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
 }
 
 /* Enable/disable 4-byte addressing mode. */
-static inline int set_4byte(struct spi_nor *nor, struct flash_info *info,
+static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info,
 			    int enable)
 {
 	int status;
@@ -469,7 +471,6 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 
 /* Used when the "_ext_id" is two bytes at most */
 #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
-	((kernel_ulong_t)&(struct flash_info) {				\
 		.id = {							\
 			((_jedec_id) >> 16) & 0xff,			\
 			((_jedec_id) >> 8) & 0xff,			\
@@ -481,11 +482,9 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 		.sector_size = (_sector_size),				\
 		.n_sectors = (_n_sectors),				\
 		.page_size = 256,					\
-		.flags = (_flags),					\
-	})
+		.flags = (_flags),
 
 #define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
-	((kernel_ulong_t)&(struct flash_info) {				\
 		.id = {							\
 			((_jedec_id) >> 16) & 0xff,			\
 			((_jedec_id) >> 8) & 0xff,			\
@@ -498,17 +497,14 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 		.sector_size = (_sector_size),				\
 		.n_sectors = (_n_sectors),				\
 		.page_size = 256,					\
-		.flags = (_flags),					\
-	})
+		.flags = (_flags),
 
 #define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags)	\
-	((kernel_ulong_t)&(struct flash_info) {				\
 		.sector_size = (_sector_size),				\
 		.n_sectors = (_n_sectors),				\
 		.page_size = (_page_size),				\
 		.addr_width = (_addr_width),				\
-		.flags = (_flags),					\
-	})
+		.flags = (_flags),
 
 /* NOTE: double check command sets and memory organization when you add
  * more nor chips.  This current list focusses on newer chips, which
@@ -521,7 +517,7 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
  * For historical (and compatibility) reasons (before we got above config) some
  * old entries may be missing 4K flag.
  */
-static const struct spi_device_id spi_nor_ids[] = {
+static const struct flash_info spi_nor_ids[] = {
 	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
 	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K) },
 	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },
@@ -589,7 +585,7 @@ static const struct spi_device_id spi_nor_ids[] = {
 
 	/* Micron */
 	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
-	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, SPI_NOR_QUAD_READ) },
+	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, SPI_NOR_QUAD_READ) },
 	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SPI_NOR_QUAD_READ) },
 	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
@@ -626,6 +622,7 @@ static const struct spi_device_id spi_nor_ids[] = {
 	{ "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128, SECT_4K) },
 	{ "s25fl132k",  INFO(0x014016,      0,  64 * 1024,  64, SECT_4K) },
 	{ "s25fl164k",  INFO(0x014017,      0,  64 * 1024, 128, SECT_4K) },
+	{ "s25fl204k",  INFO(0x014013,      0,  64 * 1024,   8, SECT_4K) },
 
 	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
 	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
@@ -702,11 +699,11 @@ static const struct spi_device_id spi_nor_ids[] = {
 	{ },
 };
 
-static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
+static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
 {
 	int			tmp;
 	u8			id[SPI_NOR_MAX_ID_LEN];
-	struct flash_info	*info;
+	const struct flash_info	*info;
 
 	tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
 	if (tmp < 0) {
@@ -715,7 +712,7 @@ static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
 	}
 
 	for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
-		info = (void *)spi_nor_ids[tmp].driver_data;
+		info = &spi_nor_ids[tmp];
 		if (info->id_len) {
 			if (!memcmp(info->id, id, info->id_len))
 				return &spi_nor_ids[tmp];
@@ -961,7 +958,7 @@ static int micron_quad_enable(struct spi_nor *nor)
 	return 0;
 }
 
-static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
+static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info)
 {
 	int status;
 
@@ -1003,8 +1000,7 @@ static int spi_nor_check(struct spi_nor *nor)
 
 int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
 {
-	const struct spi_device_id	*id = NULL;
-	struct flash_info		*info;
+	const struct flash_info *info = NULL;
 	struct device *dev = nor->dev;
 	struct mtd_info *mtd = nor->mtd;
 	struct device_node *np = dev->of_node;
@@ -1015,27 +1011,25 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
 	if (ret)
 		return ret;
 
-	/* Try to auto-detect if chip name wasn't specified */
-	if (!name)
-		id = spi_nor_read_id(nor);
-	else
-		id = spi_nor_match_id(name);
-	if (IS_ERR_OR_NULL(id))
+	if (name)
+		info = spi_nor_match_id(name);
+	/* Try to auto-detect if chip name wasn't specified or not found */
+	if (!info)
+		info = spi_nor_read_id(nor);
+	if (IS_ERR_OR_NULL(info))
 		return -ENOENT;
 
-	info = (void *)id->driver_data;
-
 	/*
 	 * If caller has specified name of flash model that can normally be
 	 * detected using JEDEC, let's verify it.
 	 */
 	if (name && info->id_len) {
-		const struct spi_device_id *jid;
+		const struct flash_info *jinfo;
 
-		jid = spi_nor_read_id(nor);
-		if (IS_ERR(jid)) {
-			return PTR_ERR(jid);
-		} else if (jid != id) {
+		jinfo = spi_nor_read_id(nor);
+		if (IS_ERR(jinfo)) {
+			return PTR_ERR(jinfo);
+		} else if (jinfo != info) {
 			/*
 			 * JEDEC knows better, so overwrite platform ID. We
 			 * can't trust partitions any longer, but we'll let
@@ -1044,9 +1038,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
 			 * information, even if it's not 100% accurate.
 			 */
 			dev_warn(dev, "found %s, expected %s\n",
-				 jid->name, id->name);
-			id = jid;
-			info = (void *)jid->driver_data;
+				 jinfo->name, info->name);
+			info = jinfo;
 		}
 	}
 
@@ -1196,7 +1189,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
 
 	nor->read_dummy = spi_nor_read_dummy_cycles(nor);
 
-	dev_info(dev, "%s (%lld Kbytes)\n", id->name,
+	dev_info(dev, "%s (%lld Kbytes)\n", info->name,
 			(long long)mtd->size >> 10);
 
 	dev_dbg(dev,
@@ -1219,9 +1212,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
 }
 EXPORT_SYMBOL_GPL(spi_nor_scan);
 
-static const struct spi_device_id *spi_nor_match_id(const char *name)
+static const struct flash_info *spi_nor_match_id(const char *name)
 {
-	const struct spi_device_id *id = spi_nor_ids;
+	const struct flash_info *id = spi_nor_ids;
 
 	while (id->name[0]) {
 		if (!strcmp(name, id->name))
diff --git a/drivers/mtd/tests/oobtest.c b/drivers/mtd/tests/oobtest.c
index 8e8525f0202f..31762120eb56 100644
--- a/drivers/mtd/tests/oobtest.c
+++ b/drivers/mtd/tests/oobtest.c
@@ -125,7 +125,8 @@ static int write_whole_device(void)
  * Display the address, offset and data bytes at comparison failure.
  * Return number of bitflips encountered.
  */
-static size_t memcmpshow(loff_t addr, const void *cs, const void *ct, size_t count)
+static size_t memcmpshowoffset(loff_t addr, loff_t offset, const void *cs,
+			       const void *ct, size_t count)
 {
 	const unsigned char *su1, *su2;
 	int res;
@@ -135,8 +136,9 @@ static size_t memcmpshow(loff_t addr, const void *cs, const void *ct, size_t cou
 	for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--, i++) {
 		res = *su1 ^ *su2;
 		if (res) {
-			pr_info("error @addr[0x%lx:0x%zx] 0x%x -> 0x%x diff 0x%x\n",
-				(unsigned long)addr, i, *su1, *su2, res);
+			pr_info("error @addr[0x%lx:0x%lx] 0x%x -> 0x%x diff 0x%x\n",
+				(unsigned long)addr, (unsigned long)offset + i,
+				*su1, *su2, res);
 			bitflips += hweight8(res);
 		}
 	}
@@ -144,6 +146,9 @@ static size_t memcmpshow(loff_t addr, const void *cs, const void *ct, size_t cou
 	return bitflips;
 }
 
+#define memcmpshow(addr, cs, ct, count) memcmpshowoffset((addr), 0, (cs), (ct),\
+							 (count))
+
 /*
  * Compare with 0xff and show the address, offset and data bytes at
  * comparison failure. Return number of bitflips encountered.
@@ -228,9 +233,10 @@ static int verify_eraseblock(int ebnum)
 				errcnt += 1;
 				return err ? err : -1;
 			}
-			bitflips = memcmpshow(addr, readbuf + use_offset,
-					      writebuf + (use_len_max * i) + use_offset,
-					      use_len);
+			bitflips = memcmpshowoffset(addr, use_offset,
+						    readbuf + use_offset,
+						    writebuf + (use_len_max * i) + use_offset,
+						    use_len);
 
 			/* verify pre-offset area for 0xff */
 			bitflips += memffshow(addr, 0, readbuf, use_offset);