summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2013-04-18 15:00:59 -0400
committerDavid S. Miller <davem@davemloft.net>2013-04-18 15:00:59 -0400
commitc1cb0d3b569b1d21ada8666efb42dfd437617a09 (patch)
treeaec20516721412a8d0b802605ac9f6e163ef1023
parent0e280af026a5662ffd57c4e623b822df1f7f47ff (diff)
parent8c5afd6d7ba6516985ed69076927b01d2882e346 (diff)
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
Jeff Kirsher says: ==================== This series contains updates to ixgbe only. v2- Dropped the following 2 patches from the series: ixgbe: Support using build_skb in the case that jumbo frames are disabled ixgbe: walk pci-e bus to find minimum width Ben Hutchings found a bug with Alex's patch, so that patch was dropped permanently. Jacob's "walk PCIe bus" patch is being re-worked for a more generic solution so that other drivers can benefit. In the remaining patches... Alex provides a fix where we were incorrectly checking the entire frag_off field when we only wanted the fragment offset. Alex also cleans up the check for PAGE_SIZE, since the default configuration allocates 32K for all buffers. Emil provides a change to the calculation of eerd so that it is consistent between the read and write functions by using | instead of +. Jacob adds support for displaying PCIe Gen3 link speed, which was previously missing from the ixgbe driver. He also provides a patch to clean up ixgbe_get_bus_info_generic to call some conversion functions, which are used also in another patch provided by Jacob. Jacob modifies the driver to enable certain devices (which have an internal switch) to read from the physical slot rather than reading data from the internal switch. Don provides a couple of fixes (which are more appropriate for net-next), one of which resolves an issue where ixgbe was only turning on the laser when the adapter was up which caused issues for those who wanted to access the MNG firmware while the port was in a down state. The other fix is for WoL when currently linked at 1G. Lastly Don bumps the driver version keep the in-kernel driver up to date with the current functionality. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c1
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c51
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_common.c63
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_common.h2
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c76
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_type.h13
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c1
7 files changed, 162 insertions, 45 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index d0113fc97b6f..4a5bfb6b3af0 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -1305,6 +1305,7 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
.release_swfw_sync = &ixgbe_release_swfw_sync,
.get_thermal_sensor_data = NULL,
.init_thermal_sensor_thresh = NULL,
+ .mng_fw_enabled = NULL,
};
static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 203a00c24330..7946da94b228 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -59,12 +59,34 @@ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
bool autoneg_wait_to_complete);
static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
+static bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
+{
+ u32 fwsm, manc, factps;
+
+ fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
+ if ((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT)
+ return false;
+
+ manc = IXGBE_READ_REG(hw, IXGBE_MANC);
+ if (!(manc & IXGBE_MANC_RCV_TCO_EN))
+ return false;
+
+ factps = IXGBE_READ_REG(hw, IXGBE_FACTPS);
+ if (factps & IXGBE_FACTPS_MNGCG)
+ return false;
+
+ return true;
+}
+
static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
- /* enable the laser control functions for SFP+ fiber */
- if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) {
+ /* enable the laser control functions for SFP+ fiber
+ * and MNG not enabled
+ */
+ if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+ !hw->mng_fw_enabled) {
mac->ops.disable_tx_laser =
&ixgbe_disable_tx_laser_multispeed_fiber;
mac->ops.enable_tx_laser =
@@ -563,7 +585,8 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
return status;
/* Flap the tx laser if it has not already been done */
- hw->mac.ops.flap_tx_laser(hw);
+ if (hw->mac.ops.flap_tx_laser)
+ hw->mac.ops.flap_tx_laser(hw);
/*
* Wait for the controller to acquire link. Per IEEE 802.3ap,
@@ -615,7 +638,8 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
return status;
/* Flap the tx laser if it has not already been done */
- hw->mac.ops.flap_tx_laser(hw);
+ if (hw->mac.ops.flap_tx_laser)
+ hw->mac.ops.flap_tx_laser(hw);
/* Wait for the link partner to also set speed */
msleep(100);
@@ -933,6 +957,7 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
ixgbe_link_speed link_speed;
s32 status;
u32 ctrl, i, autoc, autoc2;
+ u32 curr_lms;
bool link_up = false;
/* Call adapter stop to disable tx/rx and clear interrupts */
@@ -964,6 +989,9 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
hw->phy.ops.reset(hw);
+ /* remember AUTOC LMS from before we reset */
+ curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) & IXGBE_AUTOC_LMS_MASK;
+
mac_reset_top:
/*
* Issue global reset to the MAC. Needs to be SW reset if link is up.
@@ -1019,6 +1047,19 @@ mac_reset_top:
hw->mac.orig_autoc2 = autoc2;
hw->mac.orig_link_settings_stored = true;
} else {
+
+ /* If MNG FW is running on a multi-speed device that
+ * doesn't autoneg with out driver support we need to
+ * leave LMS in the state it was before we MAC reset.
+ * Likewise if we support WoL we don't want change the
+ * LMS state either.
+ */
+ if ((hw->phy.multispeed_fiber && hw->mng_fw_enabled) ||
+ hw->wol_supported)
+ hw->mac.orig_autoc =
+ (hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) |
+ curr_lms;
+
if (autoc != hw->mac.orig_autoc) {
/* Need SW/FW semaphore around AUTOC writes if LESM is
* on, likewise reset_pipeline requires us to hold
@@ -2216,7 +2257,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
.release_swfw_sync = &ixgbe_release_swfw_sync,
.get_thermal_sensor_data = &ixgbe_get_thermal_sensor_data_generic,
.init_thermal_sensor_thresh = &ixgbe_init_thermal_sensor_thresh_generic,
-
+ .mng_fw_enabled = &ixgbe_mng_enabled,
};
static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 99e472ebaa75..9bcdeb89af5a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -592,6 +592,36 @@ s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr)
return 0;
}
+enum ixgbe_bus_width ixgbe_convert_bus_width(u16 link_status)
+{
+ switch (link_status & IXGBE_PCI_LINK_WIDTH) {
+ case IXGBE_PCI_LINK_WIDTH_1:
+ return ixgbe_bus_width_pcie_x1;
+ case IXGBE_PCI_LINK_WIDTH_2:
+ return ixgbe_bus_width_pcie_x2;
+ case IXGBE_PCI_LINK_WIDTH_4:
+ return ixgbe_bus_width_pcie_x4;
+ case IXGBE_PCI_LINK_WIDTH_8:
+ return ixgbe_bus_width_pcie_x8;
+ default:
+ return ixgbe_bus_width_unknown;
+ }
+}
+
+enum ixgbe_bus_speed ixgbe_convert_bus_speed(u16 link_status)
+{
+ switch (link_status & IXGBE_PCI_LINK_SPEED) {
+ case IXGBE_PCI_LINK_SPEED_2500:
+ return ixgbe_bus_speed_2500;
+ case IXGBE_PCI_LINK_SPEED_5000:
+ return ixgbe_bus_speed_5000;
+ case IXGBE_PCI_LINK_SPEED_8000:
+ return ixgbe_bus_speed_8000;
+ default:
+ return ixgbe_bus_speed_unknown;
+ }
+}
+
/**
* ixgbe_get_bus_info_generic - Generic set PCI bus info
* @hw: pointer to hardware structure
@@ -610,35 +640,8 @@ s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw)
pci_read_config_word(adapter->pdev, IXGBE_PCI_LINK_STATUS,
&link_status);
- switch (link_status & IXGBE_PCI_LINK_WIDTH) {
- case IXGBE_PCI_LINK_WIDTH_1:
- hw->bus.width = ixgbe_bus_width_pcie_x1;
- break;
- case IXGBE_PCI_LINK_WIDTH_2:
- hw->bus.width = ixgbe_bus_width_pcie_x2;
- break;
- case IXGBE_PCI_LINK_WIDTH_4:
- hw->bus.width = ixgbe_bus_width_pcie_x4;
- break;
- case IXGBE_PCI_LINK_WIDTH_8:
- hw->bus.width = ixgbe_bus_width_pcie_x8;
- break;
- default:
- hw->bus.width = ixgbe_bus_width_unknown;
- break;
- }
-
- switch (link_status & IXGBE_PCI_LINK_SPEED) {
- case IXGBE_PCI_LINK_SPEED_2500:
- hw->bus.speed = ixgbe_bus_speed_2500;
- break;
- case IXGBE_PCI_LINK_SPEED_5000:
- hw->bus.speed = ixgbe_bus_speed_5000;
- break;
- default:
- hw->bus.speed = ixgbe_bus_speed_unknown;
- break;
- }
+ hw->bus.width = ixgbe_convert_bus_width(link_status);
+ hw->bus.speed = ixgbe_convert_bus_speed(link_status);
mac->ops.set_lan_id(hw);
@@ -1125,7 +1128,7 @@ s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
}
for (i = 0; i < words; i++) {
- eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) +
+ eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
IXGBE_EEPROM_RW_REG_START;
IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index bc3948ead6e0..22eee38868f1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -40,6 +40,8 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
u32 pba_num_size);
s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr);
+enum ixgbe_bus_width ixgbe_convert_bus_width(u16 link_status);
+enum ixgbe_bus_speed ixgbe_convert_bus_speed(u16 link_status);
s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw);
void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw);
s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 1339932f59b1..6bd1dd13682c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -63,7 +63,7 @@ char ixgbe_default_device_descr[] =
static char ixgbe_default_device_descr[] =
"Intel(R) 10 Gigabit Network Connection";
#endif
-#define DRV_VERSION "3.11.33-k"
+#define DRV_VERSION "3.13.10-k"
const char ixgbe_driver_version[] = DRV_VERSION;
static const char ixgbe_copyright[] =
"Copyright (c) 1999-2013 Intel Corporation.";
@@ -149,6 +149,52 @@ MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+static int ixgbe_read_pci_cfg_word_parent(struct ixgbe_adapter *adapter,
+ u32 reg, u16 *value)
+{
+ int pos = 0;
+ struct pci_dev *parent_dev;
+ struct pci_bus *parent_bus;
+
+ parent_bus = adapter->pdev->bus->parent;
+ if (!parent_bus)
+ return -1;
+
+ parent_dev = parent_bus->self;
+ if (!parent_dev)
+ return -1;
+
+ pos = pci_find_capability(parent_dev, PCI_CAP_ID_EXP);
+ if (!pos)
+ return -1;
+
+ pci_read_config_word(parent_dev, pos + reg, value);
+ return 0;
+}
+
+static s32 ixgbe_get_parent_bus_info(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u16 link_status = 0;
+ int err;
+
+ hw->bus.type = ixgbe_bus_type_pci_express;
+
+ /* Get the negotiated link width and speed from PCI config space of the
+ * parent, as this device is behind a switch
+ */
+ err = ixgbe_read_pci_cfg_word_parent(adapter, 18, &link_status);
+
+ /* assume caller will handle error case */
+ if (err)
+ return err;
+
+ hw->bus.width = ixgbe_convert_bus_width(link_status);
+ hw->bus.speed = ixgbe_convert_bus_speed(link_status);
+
+ return 0;
+}
+
static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter)
{
if (!test_bit(__IXGBE_DOWN, &adapter->state) &&
@@ -1337,7 +1383,7 @@ static unsigned int ixgbe_get_headlen(unsigned char *data,
return hdr.network - data;
/* record next protocol if header is present */
- if (!hdr.ipv4->frag_off)
+ if (!(hdr.ipv4->frag_off & htons(IP_OFFSET)))
nexthdr = hdr.ipv4->protocol;
} else if (protocol == __constant_htons(ETH_P_IPV6)) {
if ((hdr.network - data) > (max_len - sizeof(struct ipv6hdr)))
@@ -6425,9 +6471,7 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
struct ixgbe_tx_buffer *first;
int tso;
u32 tx_flags = 0;
-#if PAGE_SIZE > IXGBE_MAX_DATA_PER_TXD
unsigned short f;
-#endif
u16 count = TXD_USE_COUNT(skb_headlen(skb));
__be16 protocol = skb->protocol;
u8 hdr_len = 0;
@@ -6439,12 +6483,9 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
* + 1 desc for context descriptor,
* otherwise try next time
*/
-#if PAGE_SIZE > IXGBE_MAX_DATA_PER_TXD
for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
-#else
- count += skb_shinfo(skb)->nr_frags;
-#endif
+
if (ixgbe_maybe_stop_tx(tx_ring, count + 3)) {
tx_ring->tx_stats.tx_busy++;
return NETDEV_TX_BUSY;
@@ -7329,6 +7370,10 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (err)
goto err_sw_init;
+ /* Cache if MNG FW is up so we don't have to read the REG later */
+ if (hw->mac.ops.mng_fw_enabled)
+ hw->mng_fw_enabled = hw->mac.ops.mng_fw_enabled(hw);
+
/* Make it possible the adapter to be woken up via WOL */
switch (adapter->hw.mac.type) {
case ixgbe_mac_82599EB:
@@ -7481,7 +7526,9 @@ skip_sriov:
/* WOL not supported for all devices */
adapter->wol = 0;
hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap);
- if (ixgbe_wol_supported(adapter, pdev->device, pdev->subsystem_device))
+ hw->wol_supported = ixgbe_wol_supported(adapter, pdev->device,
+ pdev->subsystem_device);
+ if (hw->wol_supported)
adapter->wol = IXGBE_WUFC_MAG;
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
@@ -7492,10 +7539,13 @@ skip_sriov:
/* pick up the PCI bus settings for reporting later */
hw->mac.ops.get_bus_info(hw);
+ if (hw->device_id == IXGBE_DEV_ID_82599_SFP_SF_QP)
+ ixgbe_get_parent_bus_info(adapter);
/* print bus type/speed/width info */
e_dev_info("(PCI Express:%s:%s) %pM\n",
- (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" :
+ (hw->bus.speed == ixgbe_bus_speed_8000 ? "8.0GT/s" :
+ hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" :
hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" :
"Unknown"),
(hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" :
@@ -7579,6 +7629,12 @@ skip_sriov:
ixgbe_dbg_adapter_init(adapter);
#endif /* CONFIG_DEBUG_FS */
+ /* Need link setup for MNG FW, else wait for IXGBE_UP */
+ if (hw->mng_fw_enabled && hw->mac.ops.setup_link)
+ hw->mac.ops.setup_link(hw,
+ IXGBE_LINK_SPEED_10GB_FULL | IXGBE_LINK_SPEED_1GB_FULL,
+ true);
+
return 0;
err_register:
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 6652e96c352d..155a793705be 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -729,6 +729,13 @@ struct ixgbe_thermal_sensor_data {
#define IXGBE_MDEF_EXT(_i) (0x05160 + ((_i) * 4)) /* 8 of these (0-7) */
#define IXGBE_LSWFW 0x15014
+/* Management Bit Fields and Masks */
+#define IXGBE_MANC_RCV_TCO_EN 0x00020000 /* Rcv TCO packet enable */
+
+/* Firmware Semaphore Register */
+#define IXGBE_FWSM_MODE_MASK 0xE
+#define IXGBE_FWSM_FW_MODE_PT 0x4
+
/* ARC Subsystem registers */
#define IXGBE_HICR 0x15F00
#define IXGBE_FWSTS 0x15F0C
@@ -1019,6 +1026,7 @@ struct ixgbe_thermal_sensor_data {
#define IXGBE_CTRL_RST_MASK (IXGBE_CTRL_LNK_RST | IXGBE_CTRL_RST)
/* FACTPS */
+#define IXGBE_FACTPS_MNGCG 0x20000000 /* Manageblility Clock Gated */
#define IXGBE_FACTPS_LFS 0x40000000 /* LAN Function Select */
/* MHADD Bit Masks */
@@ -1827,6 +1835,7 @@ enum {
#define IXGBE_PCI_LINK_SPEED 0xF
#define IXGBE_PCI_LINK_SPEED_2500 0x1
#define IXGBE_PCI_LINK_SPEED_5000 0x2
+#define IXGBE_PCI_LINK_SPEED_8000 0x3
#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E
#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
#define IXGBE_PCI_DEVICE_CONTROL2_16ms 0x0005
@@ -2650,6 +2659,7 @@ enum ixgbe_bus_speed {
ixgbe_bus_speed_133 = 133,
ixgbe_bus_speed_2500 = 2500,
ixgbe_bus_speed_5000 = 5000,
+ ixgbe_bus_speed_8000 = 8000,
ixgbe_bus_speed_reserved
};
@@ -2859,6 +2869,7 @@ struct ixgbe_mac_operations {
s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
s32 (*get_thermal_sensor_data)(struct ixgbe_hw *);
s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw);
+ bool (*mng_fw_enabled)(struct ixgbe_hw *hw);
};
struct ixgbe_phy_operations {
@@ -2986,6 +2997,8 @@ struct ixgbe_hw {
bool adapter_stopped;
bool force_full_reset;
bool allow_unsupported_sfp;
+ bool mng_fw_enabled;
+ bool wol_supported;
};
struct ixgbe_info {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index 66c5e946284e..389324f5929a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -854,6 +854,7 @@ static struct ixgbe_mac_operations mac_ops_X540 = {
.enable_rx_buff = &ixgbe_enable_rx_buff_generic,
.get_thermal_sensor_data = NULL,
.init_thermal_sensor_thresh = NULL,
+ .mng_fw_enabled = NULL,
};
static struct ixgbe_eeprom_operations eeprom_ops_X540 = {