Staging: comedi: add dt2601 driver

Driver for DataTranslation DT2801

From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 693 insertions, 0 deletions

diff --git a/drivers/staging/comedi/drivers/dt2801.c b/drivers/staging/comedi/drivers/dt2801.c
new file mode 100644
index 000000000000..73aaf7911a9d
--- /dev/null
+++ b/drivers/staging/comedi/drivers/dt2801.c
@@ -0,0 +1,693 @@
+/*
+ * comedi/drivers/dt2801.c
+ * Device Driver for DataTranslation DT2801
+ *
+ */
+/*
+Driver: dt2801
+Description: Data Translation DT2801 series and DT01-EZ
+Author: ds
+Status: works
+Devices: [Data Translation] DT2801 (dt2801), DT2801-A, DT2801/5716A,
+  DT2805, DT2805/5716A, DT2808, DT2818, DT2809, DT01-EZ
+
+This driver can autoprobe the type of board.
+
+Configuration options:
+  [0] - I/O port base address
+  [1] - unused
+  [2] - A/D reference 0=differential, 1=single-ended
+  [3] - A/D range
+          0 = [-10,10]
+	  1 = [0,10]
+  [4] - D/A 0 range
+          0 = [-10,10]
+	  1 = [-5,5]
+	  2 = [-2.5,2.5]
+	  3 = [0,10]
+	  4 = [0,5]
+  [5] - D/A 1 range (same choices)
+*/
+
+#include "../comedidev.h"
+#include <linux/delay.h>
+#include <linux/ioport.h>
+
+#define DT2801_TIMEOUT 1000
+
+/* Hardware Configuration */
+/* ====================== */
+
+#define DT2801_MAX_DMA_SIZE (64 * 1024)
+
+/* Ports */
+#define DT2801_IOSIZE 2
+
+/* define's & typedef's */
+/* ====================== */
+
+/* Commands */
+#define DT_C_RESET       0x0
+#define DT_C_CLEAR_ERR   0x1
+#define DT_C_READ_ERRREG 0x2
+#define DT_C_SET_CLOCK   0x3
+
+#define DT_C_TEST        0xb
+#define DT_C_STOP        0xf
+
+#define DT_C_SET_DIGIN   0x4
+#define DT_C_SET_DIGOUT  0x5
+#define DT_C_READ_DIG    0x6
+#define DT_C_WRITE_DIG   0x7
+
+#define DT_C_WRITE_DAIM  0x8
+#define DT_C_SET_DA      0x9
+#define DT_C_WRITE_DA    0xa
+
+#define DT_C_READ_ADIM   0xc
+#define DT_C_SET_AD      0xd
+#define DT_C_READ_AD     0xe
+
+/* Command modifiers (only used with read/write), EXTTRIG can be
+   used with some other commands.
+*/
+#define DT_MOD_DMA     (1<<4)
+#define DT_MOD_CONT    (1<<5)
+#define DT_MOD_EXTCLK  (1<<6)
+#define DT_MOD_EXTTRIG (1<<7)
+
+/* Bits in status register */
+#define DT_S_DATA_OUT_READY   (1<<0)
+#define DT_S_DATA_IN_FULL     (1<<1)
+#define DT_S_READY            (1<<2)
+#define DT_S_COMMAND          (1<<3)
+#define DT_S_COMPOSITE_ERROR  (1<<7)
+
+/* registers */
+#define DT2801_DATA		0
+#define DT2801_STATUS		1
+#define DT2801_CMD		1
+
+static int dt2801_attach(comedi_device * dev, comedi_devconfig * it);
+static int dt2801_detach(comedi_device * dev);
+static comedi_driver driver_dt2801 = {
+      driver_name:"dt2801",
+      module:THIS_MODULE,
+      attach:dt2801_attach,
+      detach:dt2801_detach,
+};
+
+COMEDI_INITCLEANUP(driver_dt2801);
+
+#if 0
+// ignore 'defined but not used' warning
+static const comedi_lrange range_dt2801_ai_pgh_bipolar = { 4, {
+			RANGE(-10, 10),
+			RANGE(-5, 5),
+			RANGE(-2.5, 2.5),
+			RANGE(-1.25, 1.25),
+	}
+};
+#endif
+static const comedi_lrange range_dt2801_ai_pgl_bipolar = { 4, {
+			RANGE(-10, 10),
+			RANGE(-1, 1),
+			RANGE(-0.1, 0.1),
+			RANGE(-0.02, 0.02),
+	}
+};
+
+#if 0
+// ignore 'defined but not used' warning
+static const comedi_lrange range_dt2801_ai_pgh_unipolar = { 4, {
+			RANGE(0, 10),
+			RANGE(0, 5),
+			RANGE(0, 2.5),
+			RANGE(0, 1.25),
+	}
+};
+#endif
+static const comedi_lrange range_dt2801_ai_pgl_unipolar = { 4, {
+			RANGE(0, 10),
+			RANGE(0, 1),
+			RANGE(0, 0.1),
+			RANGE(0, 0.02),
+	}
+};
+
+typedef struct {
+	const char *name;
+	int boardcode;
+	int ad_diff;
+	int ad_chan;
+	int adbits;
+	int adrangetype;
+	int dabits;
+} boardtype_t;
+
+/* Typeid's for the different boards of the DT2801-series
+   (taken from the test-software, that comes with the board)
+   */
+static const boardtype_t boardtypes[] = {
+	{
+	      name:	"dt2801",
+	      boardcode:0x09,
+	      ad_diff:	2,
+	      ad_chan:	16,
+	      adbits:	12,
+	      adrangetype:0,
+      dabits:	12},
+	{
+	      name:	"dt2801-a",
+	      boardcode:0x52,
+	      ad_diff:	2,
+	      ad_chan:	16,
+	      adbits:	12,
+	      adrangetype:0,
+      dabits:	12},
+	{
+	      name:	"dt2801/5716a",
+	      boardcode:0x82,
+	      ad_diff:	1,
+	      ad_chan:	16,
+	      adbits:	16,
+	      adrangetype:1,
+      dabits:	12},
+	{
+	      name:	"dt2805",
+	      boardcode:0x12,
+	      ad_diff:	1,
+	      ad_chan:	16,
+	      adbits:	12,
+	      adrangetype:0,
+      dabits:	12},
+	{
+	      name:	"dt2805/5716a",
+	      boardcode:0x92,
+	      ad_diff:	1,
+	      ad_chan:	16,
+	      adbits:	16,
+	      adrangetype:1,
+      dabits:	12},
+	{
+	      name:	"dt2808",
+	      boardcode:0x20,
+	      ad_diff:	0,
+	      ad_chan:	16,
+	      adbits:	12,
+	      adrangetype:2,
+      dabits:	8},
+	{
+	      name:	"dt2818",
+	      boardcode:0xa2,
+	      ad_diff:	0,
+	      ad_chan:	4,
+	      adbits:	12,
+	      adrangetype:0,
+      dabits:	12},
+	{
+	      name:	"dt2809",
+	      boardcode:0xb0,
+	      ad_diff:	0,
+	      ad_chan:	8,
+	      adbits:	12,
+	      adrangetype:1,
+      dabits:	12},
+};
+
+#define n_boardtypes ((sizeof(boardtypes))/(sizeof(boardtypes[0])))
+#define boardtype (*(const boardtype_t *)dev->board_ptr)
+
+typedef struct {
+	const comedi_lrange *dac_range_types[2];
+	lsampl_t ao_readback[2];
+} dt2801_private;
+#define devpriv ((dt2801_private *)dev->private)
+
+static int dt2801_ai_insn_read(comedi_device * dev, comedi_subdevice * s,
+	comedi_insn * insn, lsampl_t * data);
+static int dt2801_ao_insn_read(comedi_device * dev, comedi_subdevice * s,
+	comedi_insn * insn, lsampl_t * data);
+static int dt2801_ao_insn_write(comedi_device * dev, comedi_subdevice * s,
+	comedi_insn * insn, lsampl_t * data);
+static int dt2801_dio_insn_bits(comedi_device * dev, comedi_subdevice * s,
+	comedi_insn * insn, lsampl_t * data);
+static int dt2801_dio_insn_config(comedi_device * dev, comedi_subdevice * s,
+	comedi_insn * insn, lsampl_t * data);
+
+/* These are the low-level routines:
+   writecommand: write a command to the board
+   writedata: write data byte
+   readdata: read data byte
+ */
+
+/* Only checks DataOutReady-flag, not the Ready-flag as it is done
+   in the examples of the manual. I don't see why this should be
+   necessary. */
+static int dt2801_readdata(comedi_device * dev, int *data)
+{
+	int stat = 0;
+	int timeout = DT2801_TIMEOUT;
+
+	do {
+		stat = inb_p(dev->iobase + DT2801_STATUS);
+		if (stat & (DT_S_COMPOSITE_ERROR | DT_S_READY)) {
+			return stat;
+		}
+		if (stat & DT_S_DATA_OUT_READY) {
+			*data = inb_p(dev->iobase + DT2801_DATA);
+			return 0;
+		}
+	} while (--timeout > 0);
+
+	return -ETIME;
+}
+
+static int dt2801_readdata2(comedi_device * dev, int *data)
+{
+	int lb, hb;
+	int ret;
+
+	ret = dt2801_readdata(dev, &lb);
+	if (ret)
+		return ret;
+	ret = dt2801_readdata(dev, &hb);
+	if (ret)
+		return ret;
+
+	*data = (hb << 8) + lb;
+	return 0;
+}
+
+static int dt2801_writedata(comedi_device * dev, unsigned int data)
+{
+	int stat = 0;
+	int timeout = DT2801_TIMEOUT;
+
+	do {
+		stat = inb_p(dev->iobase + DT2801_STATUS);
+
+		if (stat & DT_S_COMPOSITE_ERROR) {
+			return stat;
+		}
+		if (!(stat & DT_S_DATA_IN_FULL)) {
+			outb_p(data & 0xff, dev->iobase + DT2801_DATA);
+			return 0;
+		}
+#if 0
+		if (stat & DT_S_READY) {
+			printk("dt2801: ready flag set (bad!) in dt2801_writedata()\n");
+			return -EIO;
+		}
+#endif
+	} while (--timeout > 0);
+
+	return -ETIME;
+}
+
+static int dt2801_writedata2(comedi_device * dev, unsigned int data)
+{
+	int ret;
+
+	ret = dt2801_writedata(dev, data & 0xff);
+	if (ret < 0)
+		return ret;
+	ret = dt2801_writedata(dev, (data >> 8));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int dt2801_wait_for_ready(comedi_device * dev)
+{
+	int timeout = DT2801_TIMEOUT;
+	int stat;
+
+	stat = inb_p(dev->iobase + DT2801_STATUS);
+	if (stat & DT_S_READY) {
+		return 0;
+	}
+	do {
+		stat = inb_p(dev->iobase + DT2801_STATUS);
+
+		if (stat & DT_S_COMPOSITE_ERROR) {
+			return stat;
+		}
+		if (stat & DT_S_READY) {
+			return 0;
+		}
+	} while (--timeout > 0);
+
+	return -ETIME;
+}
+
+static int dt2801_writecmd(comedi_device * dev, int command)
+{
+	int stat;
+
+	dt2801_wait_for_ready(dev);
+
+	stat = inb_p(dev->iobase + DT2801_STATUS);
+	if (stat & DT_S_COMPOSITE_ERROR) {
+		printk("dt2801: composite-error in dt2801_writecmd(), ignoring\n");
+	}
+	if (!(stat & DT_S_READY)) {
+		printk("dt2801: !ready in dt2801_writecmd(), ignoring\n");
+	}
+	outb_p(command, dev->iobase + DT2801_CMD);
+
+	return 0;
+}
+
+static int dt2801_reset(comedi_device * dev)
+{
+	int board_code = 0;
+	unsigned int stat;
+	int timeout;
+
+	DPRINTK("dt2801: resetting board...\n");
+	DPRINTK("fingerprint: 0x%02x 0x%02x\n", inb_p(dev->iobase),
+		inb_p(dev->iobase + 1));
+
+	/* pull random data from data port */
+	inb_p(dev->iobase + DT2801_DATA);
+	inb_p(dev->iobase + DT2801_DATA);
+	inb_p(dev->iobase + DT2801_DATA);
+	inb_p(dev->iobase + DT2801_DATA);
+
+	DPRINTK("dt2801: stop\n");
+	//dt2801_writecmd(dev,DT_C_STOP);
+	outb_p(DT_C_STOP, dev->iobase + DT2801_CMD);
+
+	//dt2801_wait_for_ready(dev);
+	comedi_udelay(100);
+	timeout = 10000;
+	do {
+		stat = inb_p(dev->iobase + DT2801_STATUS);
+		if (stat & DT_S_READY)
+			break;
+	} while (timeout--);
+	if (!timeout) {
+		printk("dt2801: timeout 1 status=0x%02x\n", stat);
+	}
+	//printk("dt2801: reading dummy\n");
+	//dt2801_readdata(dev,&board_code);
+
+	DPRINTK("dt2801: reset\n");
+	outb_p(DT_C_RESET, dev->iobase + DT2801_CMD);
+	//dt2801_writecmd(dev,DT_C_RESET);
+
+	comedi_udelay(100);
+	timeout = 10000;
+	do {
+		stat = inb_p(dev->iobase + DT2801_STATUS);
+		if (stat & DT_S_READY)
+			break;
+	} while (timeout--);
+	if (!timeout) {
+		printk("dt2801: timeout 2 status=0x%02x\n", stat);
+	}
+
+	DPRINTK("dt2801: reading code\n");
+	dt2801_readdata(dev, &board_code);
+
+	DPRINTK("dt2801: ok.  code=0x%02x\n", board_code);
+
+	return board_code;
+}
+
+static int probe_number_of_ai_chans(comedi_device * dev)
+{
+	int n_chans;
+	int stat;
+	int data;
+
+	for (n_chans = 0; n_chans < 16; n_chans++) {
+		stat = dt2801_writecmd(dev, DT_C_READ_ADIM);
+		dt2801_writedata(dev, 0);
+		dt2801_writedata(dev, n_chans);
+		stat = dt2801_readdata2(dev, &data);
+
+		if (stat)
+			break;
+	}
+
+	dt2801_reset(dev);
+	dt2801_reset(dev);
+
+	return n_chans;
+}
+
+static const comedi_lrange *dac_range_table[] = {
+	&range_bipolar10,
+	&range_bipolar5,
+	&range_bipolar2_5,
+	&range_unipolar10,
+	&range_unipolar5
+};
+
+static const comedi_lrange *dac_range_lkup(int opt)
+{
+	if (opt < 0 || opt > 5)
+		return &range_unknown;
+	return dac_range_table[opt];
+}
+
+static const comedi_lrange *ai_range_lkup(int type, int opt)
+{
+	switch (type) {
+	case 0:
+		return (opt) ?
+			&range_dt2801_ai_pgl_unipolar :
+			&range_dt2801_ai_pgl_bipolar;
+	case 1:
+		return (opt) ? &range_unipolar10 : &range_bipolar10;
+	case 2:
+		return &range_unipolar5;
+	}
+	return &range_unknown;
+}
+
+/*
+   options:
+	[0] - i/o base
+	[1] - unused
+	[2] - a/d 0=differential, 1=single-ended
+	[3] - a/d range 0=[-10,10], 1=[0,10]
+	[4] - dac0 range 0=[-10,10], 1=[-5,5], 2=[-2.5,2.5] 3=[0,10], 4=[0,5]
+	[5] - dac1 range 0=[-10,10], 1=[-5,5], 2=[-2.5,2.5] 3=[0,10], 4=[0,5]
+*/
+static int dt2801_attach(comedi_device * dev, comedi_devconfig * it)
+{
+	comedi_subdevice *s;
+	unsigned long iobase;
+	int board_code, type;
+	int ret = 0;
+	int n_ai_chans;
+
+	iobase = it->options[0];
+	if (!request_region(iobase, DT2801_IOSIZE, "dt2801")) {
+		comedi_error(dev, "I/O port conflict");
+		return -EIO;
+	}
+	dev->iobase = iobase;
+
+	/* do some checking */
+
+	board_code = dt2801_reset(dev);
+
+	/* heh.  if it didn't work, try it again. */
+	if (!board_code)
+		board_code = dt2801_reset(dev);
+
+	for (type = 0; type < n_boardtypes; type++) {
+		if (boardtypes[type].boardcode == board_code)
+			goto havetype;
+	}
+	printk("dt2801: unrecognized board code=0x%02x, contact author\n",
+		board_code);
+	type = 0;
+
+      havetype:
+	dev->board_ptr = boardtypes + type;
+	printk("dt2801: %s at port 0x%lx", boardtype.name, iobase);
+
+	n_ai_chans = probe_number_of_ai_chans(dev);
+	printk(" (ai channels = %d)", n_ai_chans);
+
+	if ((ret = alloc_subdevices(dev, 4)) < 0)
+		goto out;
+
+	if ((ret = alloc_private(dev, sizeof(dt2801_private))) < 0)
+		goto out;
+
+	dev->board_name = boardtype.name;
+
+	s = dev->subdevices + 0;
+	/* ai subdevice */
+	s->type = COMEDI_SUBD_AI;
+	s->subdev_flags = SDF_READABLE | SDF_GROUND;
+#if 1
+	s->n_chan = n_ai_chans;
+#else
+	if (it->options[2])
+		s->n_chan = boardtype.ad_chan;
+	else
+		s->n_chan = boardtype.ad_chan / 2;
+#endif
+	s->maxdata = (1 << boardtype.adbits) - 1;
+	s->range_table = ai_range_lkup(boardtype.adrangetype, it->options[3]);
+	s->insn_read = dt2801_ai_insn_read;
+
+	s++;
+	/* ao subdevice */
+	s->type = COMEDI_SUBD_AO;
+	s->subdev_flags = SDF_WRITABLE;
+	s->n_chan = 2;
+	s->maxdata = (1 << boardtype.dabits) - 1;
+	s->range_table_list = devpriv->dac_range_types;
+	devpriv->dac_range_types[0] = dac_range_lkup(it->options[4]);
+	devpriv->dac_range_types[1] = dac_range_lkup(it->options[5]);
+	s->insn_read = dt2801_ao_insn_read;
+	s->insn_write = dt2801_ao_insn_write;
+
+	s++;
+	/* 1st digital subdevice */
+	s->type = COMEDI_SUBD_DIO;
+	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+	s->n_chan = 8;
+	s->maxdata = 1;
+	s->range_table = &range_digital;
+	s->insn_bits = dt2801_dio_insn_bits;
+	s->insn_config = dt2801_dio_insn_config;
+
+	s++;
+	/* 2nd digital subdevice */
+	s->type = COMEDI_SUBD_DIO;
+	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+	s->n_chan = 8;
+	s->maxdata = 1;
+	s->range_table = &range_digital;
+	s->insn_bits = dt2801_dio_insn_bits;
+	s->insn_config = dt2801_dio_insn_config;
+
+	ret = 0;
+      out:
+	printk("\n");
+
+	return ret;
+}
+
+static int dt2801_detach(comedi_device * dev)
+{
+	if (dev->iobase)
+		release_region(dev->iobase, DT2801_IOSIZE);
+
+	return 0;
+}
+
+static int dt2801_error(comedi_device * dev, int stat)
+{
+	if (stat < 0) {
+		if (stat == -ETIME) {
+			printk("dt2801: timeout\n");
+		} else {
+			printk("dt2801: error %d\n", stat);
+		}
+		return stat;
+	}
+	printk("dt2801: error status 0x%02x, resetting...\n", stat);
+
+	dt2801_reset(dev);
+	dt2801_reset(dev);
+
+	return -EIO;
+}
+
+static int dt2801_ai_insn_read(comedi_device * dev, comedi_subdevice * s,
+	comedi_insn * insn, lsampl_t * data)
+{
+	int d;
+	int stat;
+	int i;
+
+	for (i = 0; i < insn->n; i++) {
+		stat = dt2801_writecmd(dev, DT_C_READ_ADIM);
+		dt2801_writedata(dev, CR_RANGE(insn->chanspec));
+		dt2801_writedata(dev, CR_CHAN(insn->chanspec));
+		stat = dt2801_readdata2(dev, &d);
+
+		if (stat != 0)
+			return dt2801_error(dev, stat);
+
+		data[i] = d;
+	}
+
+	return i;
+}
+
+static int dt2801_ao_insn_read(comedi_device * dev, comedi_subdevice * s,
+	comedi_insn * insn, lsampl_t * data)
+{
+	data[0] = devpriv->ao_readback[CR_CHAN(insn->chanspec)];
+
+	return 1;
+}
+
+static int dt2801_ao_insn_write(comedi_device * dev, comedi_subdevice * s,
+	comedi_insn * insn, lsampl_t * data)
+{
+	dt2801_writecmd(dev, DT_C_WRITE_DAIM);
+	dt2801_writedata(dev, CR_CHAN(insn->chanspec));
+	dt2801_writedata2(dev, data[0]);
+
+	devpriv->ao_readback[CR_CHAN(insn->chanspec)] = data[0];
+
+	return 1;
+}
+
+static int dt2801_dio_insn_bits(comedi_device * dev, comedi_subdevice * s,
+	comedi_insn * insn, lsampl_t * data)
+{
+	int which = 0;
+
+	if (s == dev->subdevices + 4)
+		which = 1;
+
+	if (insn->n != 2)
+		return -EINVAL;
+	if (data[0]) {
+		s->state &= ~data[0];
+		s->state |= (data[0] & data[1]);
+		dt2801_writecmd(dev, DT_C_WRITE_DIG);
+		dt2801_writedata(dev, which);
+		dt2801_writedata(dev, s->state);
+	}
+	dt2801_writecmd(dev, DT_C_READ_DIG);
+	dt2801_writedata(dev, which);
+	dt2801_readdata(dev, data + 1);
+
+	return 2;
+}
+
+static int dt2801_dio_insn_config(comedi_device * dev, comedi_subdevice * s,
+	comedi_insn * insn, lsampl_t * data)
+{
+	int which = 0;
+
+	if (s == dev->subdevices + 4)
+		which = 1;
+
+	/* configure */
+	if (data[0]) {
+		s->io_bits = 0xff;
+		dt2801_writecmd(dev, DT_C_SET_DIGOUT);
+	} else {
+		s->io_bits = 0;
+		dt2801_writecmd(dev, DT_C_SET_DIGIN);
+	}
+	dt2801_writedata(dev, which);
+
+	return 1;
+}