diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-03-17 19:34:12 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-03-17 19:34:12 -0700 |
| commit | 08351fc6a75731226e1112fc7254542bd3a2912e (patch) | |
| tree | 8b25bd168e0663c766f0332c8be082aa7d6ed265 | |
| parent | 0df0914d414a504b975f3cc66ace0c16ef55b7f3 (diff) | |
| parent | 0dccb0489f9a5a13a33e828ab965aa49685d12f8 (diff) | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (27 commits)
arch/tile: support newer binutils assembler shift semantics
arch/tile: fix deadlock bugs in rwlock implementation
drivers/edac: provide support for tile architecture
tile on-chip network driver: sync up with latest fixes
arch/tile: support 4KB page size as well as 64KB
arch/tile: add some more VMSPLIT options and use consistent naming
arch/tile: fix some comments and whitespace
arch/tile: export some additional module symbols
arch/tile: enhance existing finv_buffer_remote() routine
arch/tile: fix two bugs in the backtracer code
arch/tile: use extended assembly to inline __mb_incoherent()
arch/tile: use a cleaner technique to enable interrupt for cpu_idle()
arch/tile: sync up with <arch/sim.h> and <arch/sim_def.h> changes
arch/tile: fix reversed test of strict_strtol() return value
arch/tile: avoid a simulator warning during bootup
arch/tile: export <asm/hardwall.h> to userspace
arch/tile: warn and retry if an IPI is not accepted by the target cpu
arch/tile: stop disabling INTCTRL_1 interrupts during hypervisor downcalls
arch/tile: fix __ndelay etc to work better
arch/tile: bug fix: exec'ed task thought it was still single-stepping
...
Fix up trivial conflict in arch/tile/kernel/vmlinux.lds.S (percpu
alignment vs section naming convention fix)
58 files changed, 1648 insertions, 1007 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 6e696bd37cf9..7d6e12dbdffa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6127,6 +6127,7 @@ S: Supported F: arch/tile/ F: drivers/tty/hvc/hvc_tile.c F: drivers/net/tile/ +F: drivers/edac/tile_edac.c TLAN NETWORK DRIVER M: Samuel Chessman <chessman@tux.org> @@ -24,7 +24,7 @@ ON WHAT HARDWARE DOES IT RUN? today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell, IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS, - Xtensa, AVR32 and Renesas M32R architectures. + Xtensa, Tilera TILE, AVR32 and Renesas M32R architectures. Linux is easily portable to most general-purpose 32- or 64-bit architectures as long as they have a paged memory management unit (PMMU) and a port of the diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 08948e4e1503..f3b78701c219 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -1,5 +1,5 @@ # For a description of the syntax of this configuration file, -# see Documentation/kbuild/config-language.txt. +# see Documentation/kbuild/kconfig-language.txt. config TILE def_bool y @@ -11,17 +11,18 @@ config TILE select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP + select GENERIC_HARDIRQS_NO_DEPRECATED # FIXME: investigate whether we need/want these options. # select HAVE_IOREMAP_PROT -# select HAVE_OPTPROBES -# select HAVE_REGS_AND_STACK_ACCESS_API -# select HAVE_HW_BREAKPOINT -# select PERF_EVENTS -# select HAVE_USER_RETURN_NOTIFIER -# config NO_BOOTMEM -# config ARCH_SUPPORTS_DEBUG_PAGEALLOC -# config HUGETLB_PAGE_SIZE_VARIABLE +# select HAVE_OPTPROBES +# select HAVE_REGS_AND_STACK_ACCESS_API +# select HAVE_HW_BREAKPOINT +# select PERF_EVENTS +# select HAVE_USER_RETURN_NOTIFIER +# config NO_BOOTMEM +# config ARCH_SUPPORTS_DEBUG_PAGEALLOC +# config HUGETLB_PAGE_SIZE_VARIABLE config MMU def_bool y @@ -39,7 +40,7 @@ config HAVE_SETUP_PER_CPU_AREA def_bool y config NEED_PER_CPU_PAGE_FIRST_CHUNK - def_bool y + def_bool y config SYS_SUPPORTS_HUGETLBFS def_bool y @@ -201,12 +202,6 @@ config NODES_SHIFT By default, 2, i.e. 2^2 == 4 DDR2 controllers. In a system with more controllers, this value should be raised. -# Need 16MB areas to enable hugetlb -# See build-time check in arch/tile/mm/init.c. -config FORCE_MAX_ZONEORDER - int - default 9 - choice depends on !TILEGX prompt "Memory split" if EXPERT @@ -233,8 +228,12 @@ choice bool "3.5G/0.5G user/kernel split" config VMSPLIT_3G bool "3G/1G user/kernel split" - config VMSPLIT_3G_OPT - bool "3G/1G user/kernel split (for full 1G low memory)" + config VMSPLIT_2_75G + bool "2.75G/1.25G user/kernel split (for full 1G low memory)" + config VMSPLIT_2_5G + bool "2.5G/1.5G user/kernel split" + config VMSPLIT_2_25G + bool "2.25G/1.75G user/kernel split" config VMSPLIT_2G bool "2G/2G user/kernel split" config VMSPLIT_1G @@ -245,7 +244,9 @@ config PAGE_OFFSET hex default 0xF0000000 if VMSPLIT_3_75G default 0xE0000000 if VMSPLIT_3_5G - default 0xB0000000 if VMSPLIT_3G_OPT + default 0xB0000000 if VMSPLIT_2_75G + default 0xA0000000 if VMSPLIT_2_5G + default 0x90000000 if VMSPLIT_2_25G default 0x80000000 if VMSPLIT_2G default 0x40000000 if VMSPLIT_1G default 0xC0000000 diff --git a/arch/tile/include/arch/interrupts_32.h b/arch/tile/include/arch/interrupts_32.h index 9d0bfa7e59be..96b5710505b6 100644 --- a/arch/tile/include/arch/interrupts_32.h +++ b/arch/tile/include/arch/interrupts_32.h @@ -16,10 +16,11 @@ #define __ARCH_INTERRUPTS_H__ /** Mask for an interrupt. */ -#ifdef __ASSEMBLER__ /* Note: must handle breaking interrupts into high and low words manually. */ -#define INT_MASK(intno) (1 << (intno)) -#else +#define INT_MASK_LO(intno) (1 << (intno)) +#define INT_MASK_HI(intno) (1 << ((intno) - 32)) + +#ifndef __ASSEMBLER__ #define INT_MASK(intno) (1ULL << (intno)) #endif @@ -89,6 +90,7 @@ #define NUM_INTERRUPTS 49 +#ifndef __ASSEMBLER__ #define QUEUED_INTERRUPTS ( \ INT_MASK(INT_MEM_ERROR) | \ INT_MASK(INT_DMATLB_MISS) | \ @@ -301,4 +303,5 @@ INT_MASK(INT_DOUBLE_FAULT) | \ INT_MASK(INT_AUX_PERF_COUNT) | \ 0) +#endif /* !__ASSEMBLER__ */ #endif /* !__ARCH_INTERRUPTS_H__ */ diff --git a/arch/tile/include/arch/sim.h b/arch/tile/include/arch/sim.h index 74b7c1624d34..e54b7b0527f3 100644 --- a/arch/tile/include/arch/sim.h +++ b/arch/tile/include/arch/sim.h @@ -152,16 +152,33 @@ sim_dump(unsigned int mask) /** * Print a string to the simulator stdout. * - * @param str The string to be written; a newline is automatically added. + * @param str The string to be written. + */ +static __inline void +sim_print(const char* str) +{ + for ( ; *str != '\0'; str++) + { + __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | + (*str << _SIM_CONTROL_OPERATOR_BITS)); + } + __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | + (SIM_PUTC_FLUSH_BINARY << _SIM_CONTROL_OPERATOR_BITS)); +} + + +/** + * Print a string to the simulator stdout. + * + * @param str The string to be written (a newline is automatically added). */ static __inline void sim_print_string(const char* str) { - int i; - for (i = 0; str[i] != 0; i++) + for ( ; *str != '\0'; str++) { __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | - (str[i] << _SIM_CONTROL_OPERATOR_BITS)); + (*str << _SIM_CONTROL_OPERATOR_BITS)); } __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | (SIM_PUTC_FLUSH_STRING << _SIM_CONTROL_OPERATOR_BITS)); @@ -203,7 +220,7 @@ sim_command(const char* str) * we are passing to the simulator are actually valid in the registers * (i.e. returned from memory) prior to the SIM_CONTROL spr. */ -static __inline int _sim_syscall0(int val) +static __inline long _sim_syscall0(int val) { long result; __asm__ __volatile__ ("mtspr SIM_CONTROL, r0" @@ -211,7 +228,7 @@ static __inline int _sim_syscall0(int val) return result; } -static __inline int _sim_syscall1(int val, long arg1) +static __inline long _sim_syscall1(int val, long arg1) { long result; __asm__ __volatile__ ("{ and zero, r1, r1; mtspr SIM_CONTROL, r0 }" @@ -219,7 +236,7 @@ static __inline int _sim_syscall1(int val, long arg1) return result; } -static __inline int _sim_syscall2(int val, long arg1, long arg2) +static __inline long _sim_syscall2(int val, long arg1, long arg2) { long result; __asm__ __volatile__ ("{ and zero, r1, r2; mtspr SIM_CONTROL, r0 }" @@ -233,7 +250,7 @@ static __inline int _sim_syscall2(int val, long arg1, long arg2) the register values for arguments 3 and up may still be in flight to the core from a stack frame reload. */ -static __inline int _sim_syscall3(int val, long arg1, long arg2, long arg3) +static __inline long _sim_syscall3(int val, long arg1, long arg2, long arg3) { long result; __asm__ __volatile__ ("{ and zero, r3, r3 };" @@ -244,7 +261,7 @@ static __inline int _sim_syscall3(int val, long arg1, long arg2, long arg3) return result; } -static __inline int _sim_syscall4(int val, long arg1, long arg2, long arg3, +static __inline long _sim_syscall4(int val, long arg1, long arg2, long arg3, long arg4) { long result; @@ -256,7 +273,7 @@ static __inline int _sim_syscall4(int val, long arg1, long arg2, long arg3, return result; } -static __inline int _sim_syscall5(int val, long arg1, long arg2, long arg3, +static __inline long _sim_syscall5(int val, long arg1, long arg2, long arg3, long arg4, long arg5) { long result; @@ -268,7 +285,6 @@ static __inline int _sim_syscall5(int val, long arg1, long arg2, long arg3, return result; } - /** * Make a special syscall to the simulator itself, if running under * simulation. This is used as the implementation of other functions @@ -281,7 +297,8 @@ static __inline int _sim_syscall5(int val, long arg1, long arg2, long arg3, */ #define _sim_syscall(syscall_num, nr, args...) \ _sim_syscall##nr( \ - ((syscall_num) << _SIM_CONTROL_OPERATOR_BITS) | SIM_CONTROL_SYSCALL, args) + ((syscall_num) << _SIM_CONTROL_OPERATOR_BITS) | SIM_CONTROL_SYSCALL, \ + ##args) /* Values for the "access_mask" parameters below. */ @@ -365,6 +382,13 @@ sim_validate_lines_evicted(unsigned long long pa, unsigned long length) } +/* Return the current CPU speed in cycles per second. */ +static __inline long +sim_query_cpu_speed(void) +{ + return _sim_syscall(SIM_SYSCALL_QUERY_CPU_SPEED, 0); +} + #endif /* !__DOXYGEN__ */ diff --git a/arch/tile/include/arch/sim_def.h b/arch/tile/include/arch/sim_def.h index 7a17082c3773..4b44a2b6a09a 100644 --- a/arch/tile/include/arch/sim_def.h +++ b/arch/tile/include/arch/sim_def.h @@ -243,6 +243,9 @@ */ #define SIM_SYSCALL_VALIDATE_LINES_EVICTED 5 +/** Syscall number for sim_query_cpu_speed(). */ +#define SIM_SYSCALL_QUERY_CPU_SPEED 6 + /* * Bit masks which can be shifted by 8, combined with diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild index 3b8f55b82dee..849ab2fa1f5c 100644 --- a/arch/tile/include/asm/Kbuild +++ b/arch/tile/include/asm/Kbuild @@ -1,3 +1,4 @@ include include/asm-generic/Kbuild.asm header-y += ucontext.h +header-y += hardwall.h diff --git a/arch/tile/include/asm/atomic.h b/arch/tile/include/asm/atomic.h index b8c49f98a44c..75a16028a952 100644 --- a/arch/tile/include/asm/atomic.h +++ b/arch/tile/include/asm/atomic.h @@ -32,7 +32,7 @@ */ static inline int atomic_read(const atomic_t *v) { - return v->counter; + return ACCESS_ONCE(v->counter); } /** diff --git a/arch/tile/include/asm/bitops_32.h b/arch/tile/include/asm/bitops_32.h index 7a93c001ac19..2638be51a164 100644 --- a/arch/tile/include/asm/bitops_32.h +++ b/arch/tile/include/asm/bitops_32.h @@ -122,7 +122,7 @@ static inline int test_and_change_bit(unsigned nr, return (_atomic_xor(addr, mask) & mask) != 0; } -/* See discussion at smp_mb__before_atomic_dec() in <asm/atomic.h>. */ +/* See discussion at smp_mb__before_atomic_dec() in <asm/atomic_32.h>. */ #define smp_mb__before_clear_bit() smp_mb() #define smp_mb__after_clear_bit() do {} while (0) diff --git a/arch/tile/include/asm/cache.h b/arch/tile/include/asm/cache.h index 08a2815b5e4e..392e5333dd8b 100644 --- a/arch/tile/include/asm/cache.h +++ b/arch/tile/include/asm/cache.h @@ -40,7 +40,7 @@ #define INTERNODE_CACHE_BYTES L2_CACHE_BYTES /* Group together read-mostly things to avoid cache false sharing */ -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#define __read_mostly __attribute__((__section__(".data..read_mostly"))) /* * Attribute for data that is kept read/write coherent until the end of diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h index 14a3f8556ace..12fb0fb330ee 100644 --- a/arch/tile/include/asm/cacheflush.h +++ b/arch/tile/include/asm/cacheflush.h @@ -138,55 +138,12 @@ static inline void finv_buffer(void *buffer, size_t size) } /* - * Flush & invalidate a VA range that is homed remotely on a single core, - * waiting until the memory controller holds the flushed values. + * Flush and invalidate a VA range that is homed remotely, waiting + * until the memory controller holds the flushed values. If "hfh" is + * true, we will do a more expensive flush involving additional loads + * to make sure we have touched all the possible home cpus of a buffer + * that is homed with "hash for home". */ -static inline void finv_buffer_remote(void *buffer, size_t size) -{ - char *p; - int i; - - /* - * Flush and invalidate the buffer out of the local L1/L2 - * and request the home cache to flush and invalidate as well. - */ - __finv_buffer(buffer, size); - - /* - * Wait for the home cache to acknowledge that it has processed - * all the flush-and-invalidate requests. This does not mean - * that the flushed data has reached the memory controller yet, - * but it does mean the home cache is processing the flushes. - */ - __insn_mf(); - - /* - * Issue a load to the last cache line, which can't complete - * until all the previously-issued flushes to the same memory - * controller have also completed. If we weren't striping - * memory, that one load would be sufficient, but since we may - * be, we also need to back up to the last load issued to - * another memory controller, which would be the point where - * we crossed an 8KB boundary (the granularity of striping - * across memory controllers). Keep backing up and doing this - * until we are before the beginning of the buffer, or have - * hit all the controllers. - */ - for (i = 0, p = (char *)buffer + size - 1; - i < (1 << CHIP_LOG_NUM_MSHIMS()) && p >= (char *)buffer; - ++i) { - const unsigned long STRIPE_WIDTH = 8192; - - /* Force a load instruction to issue. */ - *(volatile char *)p; - - /* Jump to end of previous stripe. */ - p -= STRIPE_WIDTH; - p = (char *)((unsigned long)p | (STRIPE_WIDTH - 1)); - } - - /* Wait for the loads (and thus flushes) to have completed. */ - __insn_mf(); -} +void finv_buffer_remote(void *buffer, size_t size, int hfh); #endif /* _ASM_TILE_CACHEFLUSH_H */ diff --git a/arch/tile/include/asm/edac.h b/arch/tile/include/asm/edac.h new file mode 100644 index 000000000000..87fc83eeaffd --- /dev/null +++ b/arch/tile/include/asm/edac.h @@ -0,0 +1,29 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#ifndef _ASM_TILE_EDAC_H +#define _ASM_TILE_EDAC_H + +/* ECC atomic, DMA, SMP and interrupt safe scrub function */ + +static inline void atomic_scrub(void *va, u32 size) +{ + /* + * These is nothing to be done here because CE is + * corrected by the mshim. + */ + return; +} + +#endif /* _ASM_TILE_EDAC_H */ diff --git a/arch/tile/include/asm/hugetlb.h b/arch/tile/include/asm/hugetlb.h index 0521c277bbde..d396d1805163 100644 --- a/arch/tile/include/asm/hugetlb.h +++ b/arch/tile/include/asm/hugetlb.h @@ -54,7 +54,7 @@ static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { - set_pte_order(ptep, pte, HUGETLB_PAGE_ORDER); + set_pte(ptep, pte); } static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h index 641e4ff3d805..5db0ce54284d 100644 --- a/arch/tile/include/asm/irqflags.h +++ b/arch/tile/include/asm/irqflags.h @@ -18,6 +18,8 @@ #include <arch/interrupts.h> #include <arch/chip.h> +#if !defined(__tilegx__) && defined(__ASSEMBLY__) + /* * The set of interrupts we want to allow when interrupts are nominally * disabled. The remainder are effectively "NMI" interrupts from @@ -25,6 +27,16 @@ * interrupts (aka "non-queued") are not blocked by the mask in any case. */ #if CHIP_HAS_AUX_PERF_COUNTERS() +#define LINUX_MASKABLE_INTERRUPTS_HI \ + (~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT))) +#else +#define LINUX_MASKABLE_INTERRUPTS_HI \ + (~(INT_MASK_HI(INT_PERF_COUNT))) +#endif + +#else + +#if CHIP_HAS_AUX_PERF_COUNTERS() #define LINUX_MASKABLE_INTERRUPTS \ (~(INT_MASK(INT_PERF_COUNT) | INT_MASK(INT_AUX_PERF_COUNT))) #else @@ -32,6 +44,8 @@ (~(INT_MASK(INT_PERF_COUNT))) #endif +#endif + #ifndef __ASSEMBLY__ /* NOTE: we can't include <linux/percpu.h> due to #include dependencies. */ @@ -224,11 +238,11 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask); #define IRQ_DISABLE(tmp0, tmp1) \ { \ movei tmp0, -1; \ - moveli tmp1, lo16(LINUX_MASKABLE_INTERRUPTS) \ + moveli tmp1, lo16(LINUX_MASKABLE_INTERRUPTS_HI) \ }; \ { \ mtspr SPR_INTERRUPT_MASK_SET_K_0, tmp0; \ - auli tmp1, tmp1, ha16(LINUX_MASKABLE_INTERRUPTS) \ + auli tmp1, tmp1, ha16(LINUX_MASKABLE_INTERRUPTS_HI) \ }; \ mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp1 diff --git a/arch/tile/include/asm/page.h b/arch/tile/include/asm/page.h index 7979a45430d3..3eb53525bf9d 100644 --- a/arch/tile/include/asm/page.h +++ b/arch/tile/include/asm/page.h @@ -16,10 +16,11 @@ #define _ASM_TILE_PAGE_H #include <linux/const.h> +#include <hv/pagesize.h> /* PAGE_SHIFT and HPAGE_SHIFT determine the page sizes. */ -#define PAGE_SHIFT 16 -#define HPAGE_SHIFT 24 +#define PAGE_SHIFT HV_LOG2_PAGE_SIZE_SMALL +#define HPAGE_SHIFT HV_LOG2_PAGE_SIZE_LARGE #define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) #define HPAGE_SIZE (_AC(1, UL) << HPAGE_SHIFT) @@ -29,25 +30,18 @@ #ifdef __KERNEL__ -#include <hv/hypervisor.h> -#include <arch/chip.h> - /* - * The {,H}PAGE_SHIFT values must match the HV_LOG2_PAGE_SIZE_xxx - * definitions in <hv/hypervisor.h>. We validate this at build time - * here, and again at runtime during early boot. We provide a - * separate definition since userspace doesn't have <hv/hypervisor.h>. - * - * Be careful to distinguish PAGE_SHIFT from HV_PTE_INDEX_PFN, since - * they are the same on i386 but not TILE. + * If the Kconfig doesn't specify, set a maximum zone order that + * is enough so that we can create huge pages from small pages given + * the respective sizes of the two page types. See <linux/mmzone.h>. */ -#if HV_LOG2_PAGE_SIZE_SMALL != PAGE_SHIFT -# error Small page size mismatch in Linux -#endif -#if HV_LOG2_PAGE_SIZE_LARGE != HPAGE_SHIFT -# error Huge page size mismatch in Linux +#ifndef CONFIG_FORCE_MAX_ZONEORDER +#define CONFIG_FORCE_MAX_ZONEORDER (HPAGE_SHIFT - PAGE_SHIFT + 1) #endif +#include <hv/hypervisor.h> +#include <arch/chip.h> + #ifndef __ASSEMBLY__ #include <linux/types.h> @@ -81,12 +75,6 @@ static inline void copy_user_page(void *to, void *from, unsigned long vaddr, * Hypervisor page tables are made of the same basic structure. */ -typedef __u64 pteval_t; -typedef __u64 pmdval_t; -typedef __u64 pudval_t; -typedef __u64 pgdval_t; -typedef __u64 pgprotval_t; - typedef HV_PTE pte_t; typedef HV_PTE pgd_t; typedef HV_PTE pgprot_t; diff --git a/arch/tile/include/asm/pgalloc.h b/arch/tile/include/asm/pgalloc.h index cf52791a5501..e919c0bdc22d 100644 --- a/arch/tile/include/asm/pgalloc.h +++ b/arch/tile/include/asm/pgalloc.h @@ -41,9 +41,9 @@ static inline void set_pmd(pmd_t *pmdp, pmd_t pmd) { #ifdef CONFIG_64BIT - set_pte_order(pmdp, pmd, L2_USER_PGTABLE_ORDER); + set_pte(pmdp, pmd); #else - set_pte_order(&pmdp->pud.pgd, pmd.pud.pgd, L2_USER_PGTABLE_ORDER); + set_pte(&pmdp->pud.pgd, pmd.pud.pgd); #endif } @@ -100,6 +100,9 @@ pte_t *get_prealloc_pte(unsigned long pfn); /* During init, we can shatter kernel huge pages if needed. */ void shatter_pmd(pmd_t *pmd); +/* After init, a more complex technique is required. */ +void shatter_huge_page(unsigned long addr); + #ifdef __tilegx__ /* We share a single page allocator for both L1 and L2 page tables. */ #if HV_L1_SIZE != HV_L2_SIZE diff --git a/arch/tile/include/asm/pgtable.h b/arch/tile/include/asm/pgtable.h index a6604e9485da..1a20b7ef8ea2 100644 --- a/arch/tile/include/asm/pgtable.h +++ b/arch/tile/include/asm/pgtable.h @@ -233,15 +233,23 @@ static inline void __pte_clear(pte_t *ptep) #define pgd_ERROR(e) \ pr_err("%s:%d: bad pgd 0x%016llx.\n", __FILE__, __LINE__, pgd_val(e)) +/* Return PA and protection info for a given kernel VA. */ +int va_to_cpa_and_pte(void *va, phys_addr_t *cpa, pte_t *pte); + +/* + * __set_pte() ensures we write the 64-bit PTE with 32-bit words in + * the right order on 32-bit platforms and also allows us to write + * hooks to check valid PTEs, etc., if we want. + */ +void __set_pte(pte_t *ptep, pte_t pte); + /* - * set_pte_order() sets the given PTE and also sanity-checks the + * set_pte() sets the given PTE and also sanity-checks the * requested PTE against the page homecaching. Unspecified parts * of the PTE are filled in when it is written to memory, i.e. all * caching attributes if "!forcecache", or the home cpu if "anyhome". */ -extern void set_pte_order(pte_t *ptep, pte_t pte, int order); - -#define set_pte(ptep, pteval) set_pte_order(ptep, pteval, 0) +extern void set_pte(pte_t *ptep, pte_t pte); #define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) #define set_pte_atomic(pteptr, pteval) set_pte(pteptr, pteval) @@ -293,21 +301,6 @@ extern void check_mm_caching(struct mm_struct *prev, struct mm_struct *next); #define __swp_entry_to_pte(swp) ((pte_t) { (((long long) ((swp).val)) << 32) }) /* - * clone_pgd_range(pgd_t *dst, pgd_t *src, int count); - * - * dst - pointer to pgd range anwhere on a pgd page - * src - "" - * count - the number of pgds to copy. - * - * dst and src can be on the same page, but the range must not overlap, - * and must not cross a page boundary. - */ -static inline void clone_pgd_range(pgd_t *dst, pgd_t *src, int count) -{ - memcpy(dst, src, count * sizeof(pgd_t)); -} - -/* * Conversion functions: convert a page and protection to a page entry, * and a page entry and page directory to the page they refer to. */ diff --git a/arch/tile/include/asm/pgtable_32.h b/arch/tile/include/asm/pgtable_32.h index 53ec34884744..9f98529761fd 100644 --- a/arch/tile/include/asm/pgtable_32.h +++ b/arch/tile/include/asm/pgtable_32.h @@ -24,6 +24,7 @@ #define PGDIR_SIZE HV_PAGE_SIZE_LARGE #define PGDIR_MASK (~(PGDIR_SIZE-1)) #define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT)) +#define SIZEOF_PGD (PTRS_PER_PGD * sizeof(pgd_t)) /* * The level-2 index is defined by the difference between the huge @@ -33,6 +34,7 @@ * this nomenclature is somewhat confusing. */ #define PTRS_PER_PTE (1 << (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL)) +#define SIZEOF_PTE (PTRS_PER_PTE * sizeof(pte_t)) #ifndef __ASSEMBLY__ @@ -94,7 +96,6 @@ static inline int pgd_addr_invalid(unsigned long addr) */ #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG #define __HAVE_ARCH_PTEP_SET_WRPROTECT -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR extern int ptep_test_and_clear_young(struct vm_area_struct *, unsigned long addr, pte_t *); @@ -110,6 +111,11 @@ static inline pte_t ptep_get_and_clear(struct mm_struct *mm, return pte; } +static inline void __set_pmd(pmd_t *pmdp, pmd_t pmdval) +{ + set_pte(&pmdp->pud.pgd, pmdval.pud.pgd); +} + /* Create a pmd from a PTFN. */ static inline pmd_t ptfn_pmd(unsigned long ptfn, pgprot_t prot) { diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h index a9e7c8760334..e6889474038a 100644 --- a/arch/tile/include/asm/processor.h +++ b/arch/tile/include/asm/processor.h @@ -269,7 +269,6 @@ extern char chip_model[64]; /* Data on which physical memory controller corresponds to which NUMA node. */ extern int node_controller[]; - /* Do we dump information to the console when a user application crashes? */ extern int show_crashinfo; diff --git a/arch/tile/include/asm/ptrace.h b/arch/tile/include/asm/ptrace.h index ac6d343129d3..6be2246e015c 100644 --- a/arch/tile/include/asm/ptrace.h +++ b/arch/tile/include/asm/ptrace.h @@ -141,6 +141,9 @@ struct single_step_state { /* Single-step the instruction at regs->pc */ extern void single_step_once(struct pt_regs *regs); +/* Clean up after execve(). */ +extern void single_step_execve(void); + struct task_struct; extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, diff --git a/arch/tile/include/asm/spinlock_32.h b/arch/tile/include/asm/spinlock_32.h index 88efdde8dd2b..a8f2c6e31a87 100644 --- a/arch/tile/include/asm/spinlock_32.h +++ b/arch/tile/include/asm/spinlock_32.h @@ -78,13 +78,6 @@ void arch_spin_unlock_wait(arch_spinlock_t *lock); #define _RD_COUNT_SHIFT 24 #define _RD_COUNT_WIDTH 8 -/* Internal functions; do not use. */ -void arch_read_lock_slow(arch_rwlock_t *, u32); -int arch_read_trylock_slow(arch_rwlock_t *); -void arch_read_unlock_slow(arch_rwlock_t *); -void arch_write_lock_slow(arch_rwlock_t *, u32); -void arch_write_unlock_slow(arch_rwlock_t *, u32); - /** * arch_read_can_lock() - would read_trylock() succeed? */ @@ -104,94 +97,32 @@ static inline int arch_write_can_lock(arch_rwlock_t *rwlock) /** * arch_read_lock() - acquire a read lock. */ -static inline void arch_read_lock(arch_rwlock_t *rwlock) -{ - u32 val = __insn_tns((int *)&rwlock->lock); - if (unlikely(val << _RD_COUNT_WIDTH)) { - arch_read_lock_slow(rwlock, val); - return; - } - rwlock->lock = val + (1 << _RD_COUNT_SHIFT); -} +void arch_read_lock(arch_rwlock_t *rwlock); /** - * arch_read_lock() - acquire a write lock. + * arch_write_lock() - acquire a write lock. */ -static inline void arch_write_lock(arch_rwlock_t *rwlock) -{ - u32 val = __insn_tns((int *)&rwlock->lock); - if (unlikely(val != 0)) { - arch_write_lock_slow(rwlock, val); - return; - } - rwlock->lock = 1 << _WR_NEXT_SHIFT; -} +void arch_write_lock(arch_rwlock_t *rwlock); /** * arch_read_trylock() - try to acquire a read lock. */ -static inline int arch_read_trylock(arch_rwlock_t *rwlock) -{ - int locked; - u32 val = __insn_tns((int *)&rwlock->lock); - if (unlikely(val & 1)) - return arch_read_trylock_slow(rwlock); - locked = (val << _RD_COUNT_WIDTH) == 0; - rwlock->lock = val + (locked << _RD_COUNT_SHIFT); - return locked; -} +int arch_read_trylock(arch_rwlock_t *rwlock); /** * arch_write_trylock() - try to acquire a write lock. */ -static inline int arch_write_trylock(arch_rwlock_t *rwlock) -{ - u32 val = __insn_tns((int *)&rwlock->lock); - - /* - * If a tns is in progress, or there's a waiting or active locker, - * or active readers, we can't take the lock, so give up. - */ - if (unlikely(val != 0)) { - if (!(val & 1)) - rwlock->lock = val; - return 0; - } - - /* Set the "next" field to mark it locked. */ - rwlock->lock = 1 << _WR_NEXT_SHIFT; - return 1; -} +int arch_write_trylock(arch_rwlock_t *rwlock); /** * arch_read_unlock() - release a read lock. */ -static inline void arch_read_unlock(arch_rwlock_t *rwlock) -{ - u32 val; - mb(); /* guarantee anything modified under the lock is visible */ - val = __insn_tns((int *)&rwlock->lock); - if (unlikely(val & 1)) { - arch_read_unlock_slow(rwlock); - return; - } - rwlock->lock = val - (1 << _RD_COUNT_SHIFT); -} +void arch_read_unlock(arch_rwlock_t *rwlock); /** * arch_write_unlock() - release a write lock. */ -static inline void arch_write_unlock(arch_rwlock_t *rwlock) -{ - u32 val; - mb(); /* guarantee anything modified under the lock is visible */ - val = __insn_tns((int *)&rwlock->lock); - if (unlikely(val != (1 << _WR_NEXT_SHIFT))) { - arch_write_unlock_slow(rwlock, val); - return; - } - rwlock->lock = 0; -} +void arch_write_unlock(arch_rwlock_t *rwlock); #define arch_read_lock_flags(lock, flags) arch_read_lock(lock) #define arch_write_lock_flags(lock, flags) arch_write_lock(lock) diff --git a/arch/tile/include/asm/stack.h b/arch/tile/include/asm/stack.h index f908473c322d..4d97a2db932e 100644 --- a/arch/tile/include/asm/stack.h +++ b/arch/tile/include/asm/stack.h @@ -18,13 +18,14 @@ #include <linux/types.h> #include <linux/sched.h> #include <asm/backtrace.h> +#include <asm/page.h> #include <hv/hypervisor.h> /* Everything we need to keep track of a backtrace iteration */ struct KBacktraceIterator { BacktraceIterator it; struct task_struct *task; /* task we are backtracing */ - HV_PTE *pgtable; /* page table for user space access */ + pte_t *pgtable; /* page table for user space access */ int end; /* iteration complete. */ int new_context; /* new context is starting */ int profile; /* profiling, so stop on async intrpt */ diff --git a/arch/tile/include/asm/system.h b/arch/tile/include/asm/system.h index 5388850deeb2..23d1842f4839 100644 --- a/arch/tile/include/asm/system.h +++ b/arch/tile/include/asm/system.h @@ -90,7 +90,24 @@ #endif #if !CHIP_HAS_MF_WAITS_FOR_VICTIMS() -int __mb_incoherent(void); /* Helper routine for mb_incoherent(). */ +#include <hv/syscall_public.h> +/* + * Issue an uncacheable load to each memory controller, then + * wait until those loads have completed. + */ +static inline void __mb_incoherent(void) +{ + long clobber_r10; + asm volatile("swint2" + : "=R10" (clobber_r10) + : "R10" (HV_SYS_fence_incoherent) + : "r0", "r1", "r2", "r3", "r4", + "r5", "r6", "r7", "r8", "r9", + "r11", "r12", "r13", "r14", + "r15", "r16", "r17", "r18", "r19", + "r20", "r21", "r22", "r23", "r24", + "r25", "r26", "r27", "r28", "r29"); +} #endif /* Fence to guarantee visibility of stores to incoherent memory. */ diff --git a/arch/tile/include/asm/thread_info.h b/arch/tile/include/asm/thread_info.h index 3872f2b345d2..9e8e9c4dfa2a 100644 --- a/arch/tile/include/asm/thread_info.h +++ b/arch/tile/include/asm/thread_info.h @@ -68,6 +68,7 @@ struct thread_info { #else #define THREAD_SIZE_ORDER (0) #endif +#define THREAD_SIZE_PAGES (1 << THREAD_SIZE_ORDER) #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) #define LOG2_THREAD_SIZE (PAGE_SHIFT + THREAD_SIZE_ORDER) diff --git a/arch/tile/include/asm/timex.h b/arch/tile/include/asm/timex.h index 3baf5fc4c0a1..29921f0b86da 100644 --- a/arch/tile/include/asm/timex.h +++ b/arch/tile/include/asm/timex.h @@ -38,6 +38,9 @@ static inline cycles_t get_cycles(void) cycles_t get_clock_rate(void); +/* Convert nanoseconds to core clock cycles. */ +cycles_t ns2cycles(unsigned long nsecs); + /* Called at cpu initialization to set some low-level constants. */ void setup_clock(void); diff --git a/arch/tile/include/hv/drv_mshim_intf.h b/arch/tile/include/hv/drv_mshim_intf.h new file mode 100644 index 000000000000..c6ef3bdc55cf --- /dev/null +++ b/arch/tile/include/hv/drv_mshim_intf.h @@ -0,0 +1,50 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/** + * @file drv_mshim_intf.h + * Interface definitions for the Linux EDAC memory controller driver. + */ + +#ifndef _SYS_HV_INCLUDE_DRV_MSHIM_INTF_H +#define _SYS_HV_INCLUDE_DRV_MSHIM_INTF_H + +/** Number of memory controllers in the public API. */ +#define TILE_MAX_MSHIMS 4 + +/** Memory info under each memory controller. */ +struct mshim_mem_info +{ + uint64_t mem_size; /**< Total memory size in bytes. */ + uint8_t mem_type; /**< Memory type, DDR2 or DDR3. */ + uint8_t mem_ecc; /**< Memory supports ECC. */ +}; + +/** + * DIMM error structure. + * For now, only correctable errors are counted and the mshim doesn't record + * the error PA. HV takes panic upon uncorrectable errors. + */ +struct mshim_mem_error +{ + uint32_t sbe_count; /**< Number of single-bit errors. */ +}; + +/** Read this offset to get the memory info per mshim. */ +#define MSHIM_MEM_INFO_OFF 0x100 + +/** Read this offset to check DIMM error. */ +#define MSHIM_MEM_ERROR_OFF 0x200 + +#endif /* _SYS_HV_INCLUDE_DRV_MSHIM_INTF_H */ diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h index f672544cd4f9..1b8bf03d62a0 100644 --- a/arch/tile/include/hv/hypervisor.h +++ b/arch/tile/include/hv/hypervisor.h @@ -338,9 +338,10 @@ typedef int HV_Errno; #define HV_ENOTREADY -812 /**< Device not ready */ #define HV_EIO -813 /**< I/O error */ #define HV_ENOMEM -814 /**< Out of memory */ +#define HV_EAGAIN -815 /**< Try again */ #define HV_ERR_MAX -801 /**< Largest HV error code */ -#define HV_ERR_MIN -814 /**< Smallest HV error code */ +#define HV_ERR_MIN -815 /**< Smallest HV error code */ #ifndef __ASSEMBLER__ @@ -867,6 +868,43 @@ typedef struct */ HV_PhysAddrRange hv_inquire_physical(int idx); +/** Possible DIMM types. */ +typedef enum +{ + NO_DIMM = 0, /**< No DIMM */ + DDR2 = 1, /**< DDR2 */ + DDR3 = 2 /**< DDR3 */ +} HV_DIMM_Type; + +#ifdef __tilegx__ + +/** Log2 of minimum DIMM bytes supported by the memory controller. */ +#define HV_MSH_MIN_DIMM_SIZE_SHIFT 29 + +/** Max number of DIMMs contained by one memory controller. */ +#define HV_MSH_MAX_DIMMS 8 + +#else + +/** Log2 of minimum DIMM bytes supported by the memory controller. */ +#define HV_MSH_MIN_DIMM_SIZE_SHIFT 26 + +/** Max number of DIMMs contained by one memory controller. */ +#define HV_MSH_MAX_DIMMS 2 + +#endif + +/** Number of bits to right-shift to get the DIMM type. */ +#define HV_DIMM_TYPE_SHIFT 0 + +/** Bits to mask to get the DIMM type. */ +#define HV_DIMM_TYPE_MASK 0xf + +/** Number of bits to right-shift to get the DIMM size. */ +#define HV_DIMM_SIZE_SHIFT 4 + +/** Bits to mask to get the DIMM size. */ +#define HV_DIMM_SIZE_MASK 0xf /** Memory controller information. */ typedef struct @@ -964,6 +1002,11 @@ HV_ASIDRange hv_inquire_asid(int idx); /** Waits for at least the specified number of nanoseconds then returns. * + * NOTE: this deprecated function currently assumes a 750 MHz clock, + * and is thus not generally suitable for use. New code should call + * hv_sysconf(HV_SYSCONF_CPU_SPEED), compute a cycle count to wait for, + * and delay by looping while checking the cycle counter SPR. + * * @param nanosecs The number of nanoseconds to sleep. */ void hv_nanosleep(int nanosecs); @@ -1038,6 +1081,7 @@ int hv_console_write(HV_VirtAddr bytes, int len); * downcall: * * INT_MESSAGE_RCV_DWNCL (hypervisor message available) + * INT_DEV_INTR_DWNCL (device interrupt) * INT_DMATLB_MISS_DWNCL (DMA TLB miss) * INT_SNITLB_MISS_DWNCL (SNI TLB miss) * INT_DMATLB_ACCESS_DWNCL (DMA TLB access violation) diff --git a/arch/tile/kernel/entry.S b/arch/tile/kernel/entry.S index fd8dc42abdcb..431e9ae60488 100644 --- a/arch/tile/kernel/entry.S +++ b/arch/tile/kernel/entry.S @@ -38,12 +38,6 @@ STD_ENTRY(kernel_execve) jrp lr STD_ENDPROC(kernel_execve) -/* Delay a fixed number of cycles. */ -STD_ENTRY(__delay) - { addi r0, r0, -1; bnzt r0, . } - jrp lr - STD_ENDPROC(__delay) - /* * We don't run this function directly, but instead copy it to a page * we map into every user process. See vdso_setup(). @@ -97,23 +91,17 @@ STD_ENTRY(smp_nap) /* * Enable interrupts racelessly and then nap until interrupted. + * Architecturally, we are guaranteed that enabling interrupts via + * mtspr to INTERRUPT_CRITICAL_SECTION only interrupts at the next PC. * This function's _cpu_idle_nap address is special; see intvec.S. * When interrupted at _cpu_idle_nap, we bump the PC forward 8, and * as a result return to the function that called _cpu_idle(). */ STD_ENTRY(_cpu_idle) - { - lnk r0 - movei r1, KERNEL_PL - } - { - addli r0, r0, _cpu_idle_nap - . - mtspr INTERRUPT_CRITICAL_SECTION, r1 - } + movei r1, 1 + mtspr INTERRUPT_CRITICAL_SECTION, r1 IRQ_ENABLE(r2, r3) /* unmask, but still with ICS set */ - mtspr SPR_EX_CONTEXT_K_1, r1 /* Kernel PL, ICS clear */ - mtspr SPR_EX_CONTEXT_K_0, r0 - iret + mtspr INTERRUPT_CRITICAL_SECTION, zero .global _cpu_idle_nap _cpu_idle_nap: nap diff --git a/arch/tile/kernel/head_32.S b/arch/tile/kernel/head_32.S index 90e7c4435693..1a39b7c1c87e 100644 --- a/arch/tile/kernel/head_32.S +++ b/arch/tile/kernel/head_32.S @@ -133,7 +133,7 @@ ENTRY(_start) } ENDPROC(_start) -.section ".bss.page_aligned","w" +__PAGE_ALIGNED_BSS .align PAGE_SIZE ENTRY(empty_zero_page) .fill PAGE_SIZE,1,0 @@ -145,10 +145,10 @@ ENTRY(empty_zero_page) .endif .word HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED | \ (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) - .word (\bits1) | (HV_CPA_TO_PFN(\cpa) << HV_PTE_INDEX_PFN) + .word (\bits1) | (HV_CPA_TO_PFN(\cpa) << (HV_PTE_INDEX_PFN - 32)) .endm -.section ".data.page_aligned","wa" +__PAGE_ALIGNED_DATA .align PAGE_SIZE ENTRY(swapper_pg_dir) /* @@ -158,12 +158,14 @@ ENTRY(swapper_pg_dir) */ .set addr, 0 .rept (MEM_USER_INTRPT - PAGE_OFFSET) >> PGDIR_SHIFT - PTE addr + PAGE_OFFSET, addr, HV_PTE_READABLE | HV_PTE_WRITABLE + PTE addr + PAGE_OFFSET, addr, (1 << (HV_PTE_INDEX_READABLE - 32)) | \ + (1 << (HV_PTE_INDEX_WRITABLE - 32)) .set addr, addr + PGDIR_SIZE .endr /* The true text VAs are mapped as VA = PA + MEM_SV_INTRPT */ - PTE MEM_SV_INTRPT, 0, HV_PTE_READABLE | HV_PTE_EXECUTABLE + PTE MEM_SV_INTRPT, 0, (1 << (HV_PTE_INDEX_READABLE - 32)) | \ + (1 << (HV_PTE_INDEX_EXECUTABLE - 32)) .org swapper_pg_dir + HV_L1_SIZE END(swapper_pg_dir) @@ -176,6 +178,7 @@ ENTRY(swapper_pg_dir) __INITDATA .align CHIP_L2_LINE_SIZE() ENTRY(swapper_pgprot) - PTE 0, 0, HV_PTE_READABLE | HV_PTE_WRITABLE, 1 + PTE 0, 0, (1 << (HV_PTE_INDEX_READABLE - 32)) | \ + (1 << (HV_PTE_INDEX_WRITABLE - 32)), 1 .align CHIP_L2_LINE_SIZE() END(swapper_pgprot) diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S index 5eed4a02bf62..fffcfa6b3a62 100644 --- a/arch/tile/kernel/intvec_32.S +++ b/arch/tile/kernel/intvec_32.S @@ -32,10 +32,6 @@ # error "No support for kernel preemption currently" #endif -#if INT_INTCTRL_K < 32 || INT_INTCTRL_K >= 48 -# error INT_INTCTRL_K coded to set high interrupt mask -#endif - #define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg) #define PTREGS_OFFSET_SYSCALL PTREGS_OFFSET_REG(TREG_SYSCALL_NR) @@ -1199,46 +1195,6 @@ STD_ENTRY(interrupt_return) STD_ENDPROC(interrupt_return) /* - * This interrupt variant clears the INT_INTCTRL_K interrupt mask bit - * before returning, so we can properly get more downcalls. - */ - .pushsection .text.handle_interrupt_downcall,"ax" -handle_interrupt_downcall: - finish_interrupt_save handle_interrupt_downcall - check_single_stepping normal, .Ldispatch_downcall -.Ldispatch_downcall: - - /* Clear INTCTRL_K from the set of interrupts we ever enable. */ - GET_INTERRUPTS_ENABLED_MASK_PTR(r30) - { - addi r30, r30, 4 - movei r31, INT_MASK(INT_INTCTRL_K) - } - { - lw r20, r30 - nor r21, r31, zero - } - and r20, r20, r21 - sw r30, r20 - - { - jalr r0 - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - } - FEEDBACK_REENTER(handle_interrupt_downcall) - - /* Allow INTCTRL_K to be enabled next time we enable interrupts. */ - lw r20, r30 - or r20, r20, r31 - sw r30, r20 - - { - movei r30, 0 /* not an NMI */ - j interrupt_return - } - STD_ENDPROC(handle_interrupt_downcall) - - /* * Some interrupts don't check for single stepping */ .pushsection .text.handle_interrupt_no_single_step,"ax" @@ -1600,7 +1556,10 @@ STD_ENTRY(_sys_clone) .align 64 /* Align much later jump on the start of a cache line. */ #if !ATOMIC_LOCKS_FOUND_VIA_TABLE() - nop; nop + nop +#if PAGE_SIZE >= 0x10000 + nop +#endif #endif ENTRY(sys_cmpxchg) @@ -1628,9 +1587,13 @@ ENTRY(sys_cmpxchg) * about aliasing among multiple mappings of the same physical page, * and we ignore the low 3 bits so we have one lock that covers * both a cmpxchg64() and a cmpxchg() on either its low or high word. - * NOTE: this code must match __atomic_hashed_lock() in lib/atomic.c. + * NOTE: this must match __atomic_hashed_lock() in lib/atomic_32.c. */ +#if (PAGE_OFFSET & 0xffff) != 0 +# error Code here assumes PAGE_OFFSET can be loaded with just hi16() +#endif + #if ATOMIC_LOCKS_FOUND_VIA_TABLE() { /* Check for unaligned input. */ @@ -1723,11 +1686,14 @@ ENTRY(sys_cmpxchg) lw r26, r0 } { - /* atomic_locks is page aligned so this suffices to get its addr. */ - auli r21, zero, hi16(atomic_locks) + auli r21, zero, ha16(atomic_locks) bbns r23, .Lcmpxchg_badaddr } +#if PAGE_SIZE < 0x10000 + /* atomic_locks is page-aligned so for big pages we don't need this. */ + addli r21, r21, lo16(atomic_locks) +#endif { /* * Insert the hash bits into the page-aligned pointer. @@ -1762,7 +1728,7 @@ ENTRY(sys_cmpxchg) /* * Perform the actual cmpxchg or atomic_update. - * Note that __futex_mark_unlocked() in uClibc relies on + * Note that the system <arch/atomic.h> header relies on * atomic_update() to always perform an "mf", so don't make * it optional or conditional without modifying that code. */ @@ -2014,17 +1980,17 @@ int_unalign: #endif int_hand INT_INTCTRL_0, INTCTRL_0, bad_intr int_hand INT_MESSAGE_RCV_DWNCL, MESSAGE_RCV_DWNCL, \ - hv_message_intr, handle_interrupt_downcall + hv_message_intr int_hand INT_DEV_INTR_DWNCL, DEV_INTR_DWNCL, \ - tile_dev_intr, handle_interrupt_downcall + tile_dev_intr int_hand INT_I_ASID, I_ASID, bad_intr int_hand INT_D_ASID, D_ASID, bad_intr int_hand INT_DMATLB_MISS_DWNCL, DMATLB_MISS_DWNCL, \ - do_page_fault, handle_interrupt_downcall + do_page_fault int_hand INT_SNITLB_MISS_DWNCL, SNITLB_MISS_DWNCL, \ - do_page_fault, handle_interrupt_downcall + do_page_fault int_hand INT_DMATLB_ACCESS_DWNCL, DMATLB_ACCESS_DWNCL, \ - do_page_fault, handle_interrupt_downcall + do_page_fault int_hand INT_SN_CPL, SN_CPL, bad_intr int_hand INT_DOUBLE_FAULT, DOUBLE_FAULT, do_trap #if CHIP_HAS_AUX_PERF_COUNTERS() diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c index 128805ef8f2c..0baa7580121f 100644 --- a/arch/tile/kernel/irq.c +++ b/arch/tile/kernel/irq.c @@ -176,43 +176,43 @@ void disable_percpu_irq(unsigned int irq) EXPORT_SYMBOL(disable_percpu_irq); /* Mask an interrupt. */ -static void tile_irq_chip_mask(unsigned int irq) +static void tile_irq_chip_mask(struct irq_data *d) { - mask_irqs(1UL << irq); + mask_irqs(1UL << d->irq); } /* Unmask an interrupt. */ -static void tile_irq_chip_unmask(unsigned int irq) +static void tile_irq_chip_unmask(struct irq_data *d) { - unmask_irqs(1UL << irq); + unmask_irqs(1UL << d->irq); } /* * Clear an interrupt before processing it so that any new assertions * will trigger another irq. */ -static void tile_irq_chip_ack(unsigned int irq) +static void tile_irq_chip_ack(struct irq_data *d) { - if ((unsigned long)get_irq_chip_data(irq) != IS_HW_CLEARED) - clear_irqs(1UL << irq); + if ((unsigned long)irq_data_get_irq_chip_data(d) != IS_HW_CLEARED) + clear_irqs(1UL << d->irq); } /* * For per-cpu interrupts, we need to avoid unmasking any interrupts * that we disabled via disable_percpu_irq(). */ -static void tile_irq_chip_eoi(unsigned int irq) +static void tile_irq_chip_eoi(struct irq_data *d) { - if (!(__get_cpu_var(irq_disable_mask) & (1UL << irq))) - unmask_irqs(1UL << irq); + if (!(__get_cpu_var(irq_disable_mask) & (1UL << d->irq))) + unmask_irqs(1UL << d->irq); } static struct irq_chip tile_irq_chip = { .name = "tile_irq_chip", - .ack = tile_irq_chip_ack, - .eoi = tile_irq_chip_eoi, - .mask = tile_irq_chip_mask, - .unmask = tile_irq_chip_unmask, + .irq_ack = tile_irq_chip_ack, + .irq_eoi = tile_irq_chip_eoi, + .irq_mask = tile_irq_chip_mask, + .irq_unmask = tile_irq_chip_unmask, }; void __init init_IRQ(void) @@ -277,8 +277,10 @@ int show_interrupts(struct seq_file *p, void *v) } if (i < NR_IRQS) { - raw_spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; + struct irq_desc *desc = irq_to_desc(i); + + raw_spin_lock_irqsave(&desc->lock, flags); + action = desc->action; if (!action) goto skip; seq_printf(p, "%3d: ", i); @@ -288,7 +290,7 @@ int show_interrupts(struct seq_file *p, void *v) for_each_online_cpu(j) seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); #endif - seq_printf(p, " %14s", irq_desc[i].chip->name); + seq_printf(p, " %14s", get_irq_desc_chip(desc)->name); seq_printf(p, " %s", action->name); for (action = action->next; action; action = action->next) @@ -296,7 +298,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); skip: - raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags); + raw_spin_unlock_irqrestore(&desc->lock, flags); } return 0; } diff --git a/arch/tile/kernel/machine_kexec.c b/arch/tile/kernel/machine_kexec.c index 0d8b9e933487..e00d7179989e 100644 --- a/arch/tile/kernel/machine_kexec.c +++ b/arch/tile/kernel/machine_kexec.c @@ -240,8 +240,11 @@ static void setup_quasi_va_is_pa(void) pte = hv_pte(_PAGE_KERNEL | _PAGE_HUGE_PAGE); pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3); - for (i = 0; i < pgd_index(PAGE_OFFSET); i++) - pgtable[i] = pfn_pte(i << (HPAGE_SHIFT - PAGE_SHIFT), pte); + for (i = 0; i < pgd_index(PAGE_OFFSET); i++) { + unsigned long pfn = i << (HPAGE_SHIFT - PAGE_SHIFT); + if (pfn_valid(pfn)) + __set_pte(&pgtable[i], pfn_pte(pfn, pte)); + } } diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c index 5ad5e13b0fa6..658752b2835e 100644 --- a/arch/tile/kernel/pci-dma.c +++ b/arch/tile/kernel/pci-dma.c @@ -86,6 +86,21 @@ EXPORT_SYMBOL(dma_free_coherent); * can count on nothing having been touched. */ +/* Flush a PA range from cache page by page. */ +static void __dma_map_pa_range(dma_addr_t dma_addr, size_t size) +{ + struct page *page = pfn_to_page(PFN_DOWN(dma_addr)); + size_t bytesleft = PAGE_SIZE - (dma_addr & (PAGE_SIZE - 1)); + + while ((ssize_t)size > 0) { + /* Flush the page. */ + homecache_flush_cache(page++, 0); + + /* Figure out if we need to continue on the next page. */ + size -= bytesleft; + bytesleft = PAGE_SIZE; + } +} /* * dma_map_single can be passed any memory address, and there appear @@ -97,26 +112,12 @@ EXPORT_SYMBOL(dma_free_coherent); dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, enum dma_data_direction direction) { - struct page *page; - dma_addr_t dma_addr; - int thispage; + dma_addr_t dma_addr = __pa(ptr); BUG_ON(!valid_dma_direction(direction)); WARN_ON(size == 0); - dma_addr = __pa(ptr); - - /* We might have been handed a buffer that wraps a page boundary */ - while ((int)size > 0) { - /* The amount to flush that's on this page */ - thispage = PAGE_SIZE - ((unsigned long)ptr & (PAGE_SIZE - 1)); - thispage = min((int)thispage, (int)size); - /* Is this valid for any page we could be handed? */ - page = pfn_to_page(kaddr_to_pfn(ptr)); - homecache_flush_cache(page, 0); - ptr += thispage; - size -= thispage; - } + __dma_map_pa_range(dma_addr, size); return dma_addr; } @@ -140,10 +141,8 @@ int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, WARN_ON(nents == 0 || sglist->length == 0); for_each_sg(sglist, sg, nents, i) { - struct page *page; sg->dma_address = sg_phys(sg); - page = pfn_to_page(sg->dma_address >> PAGE_SHIFT); - homecache_flush_cache(page, 0); + __dma_map_pa_range(sg->dma_address, sg->length); } return nents; @@ -163,6 +162,7 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page, { BUG_ON(!valid_dma_direction(direction)); + BUG_ON(offset + size > PAGE_SIZE); homecache_flush_cache(page, 0); return page_to_pa(page) + offset; diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c index e90eb53173b0..b9cd962e1d30 100644 --- a/arch/tile/kernel/process.c +++ b/arch/tile/kernel/process.c @@ -165,7 +165,7 @@ void free_thread_info(struct thread_info *info) kfree(step_state); } - free_page((unsigned long)info); + free_pages((unsigned long)info, THREAD_SIZE_ORDER); } static void save_arch_state(struct thread_struct *t); @@ -574,6 +574,8 @@ SYSCALL_DEFINE4(execve, const char __user *, path, goto out; error = do_execve(filename, argv, envp, regs); putname(filename); + if (error == 0) + single_step_execve(); out: return error; } @@ -593,6 +595,8 @@ long compat_sys_execve(const char __user *path, goto out; error = compat_do_execve(filename, argv, envp, regs); putname(filename); + if (error == 0) + single_step_execve(); out: return error; } diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c index f18573643ed1..3696b1832566 100644 --- a/arch/tile/kernel/setup.c +++ b/arch/tile/kernel/setup.c @@ -59,6 +59,8 @@ unsigned long __initdata node_memmap_pfn[MAX_NUMNODES]; unsigned long __initdata node_percpu_pfn[MAX_NUMNODES]; unsigned long __initdata node_free_pfn[MAX_NUMNODES]; +static unsigned long __initdata node_percpu[MAX_NUMNODES]; + #ifdef CONFIG_HIGHMEM /* Page frame index of end of lowmem on each controller. */ unsigned long __cpuinitdata node_lowmem_end_pfn[MAX_NUMNODES]; @@ -554,7 +556,6 @@ static void __init setup_bootmem_allocator(void) reserve_bootmem(crashk_res.start, crashk_res.end - crashk_res.start + 1, 0); #endif - } void *__init alloc_remap(int nid, unsigned long size) @@ -568,11 +569,13 @@ void *__init alloc_remap(int nid, unsigned long size) static int __init percpu_size(void) { - int size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE); -#ifdef CONFIG_MODULES - if (size < PERCPU_ENOUGH_ROOM) - size = PERCPU_ENOUGH_ROOM; -#endif + int size = __per_cpu_end - __per_cpu_start; + size += PERCPU_MODULE_RESERVE; + size += PERCPU_DYNAMIC_EARLY_SIZE; + if (size < PCPU_MIN_UNIT_SIZE) + size = PCPU_MIN_UNIT_SIZE; + size = roundup(size, PAGE_SIZE); + /* In several places we assume the per-cpu data fits on a huge page. */ BUG_ON(kdata_huge && size > HPAGE_SIZE); return size; @@ -589,7 +592,6 @@ static inline unsigned long alloc_bootmem_pfn(int size, unsigned long goal) static void __init zone_sizes_init(void) { unsigned long zones_size[MAX_NR_ZONES] = { 0 }; - unsigned long node_percpu[MAX_NUMNODES] = { 0 }; int size = percpu_size(); int num_cpus = smp_height * smp_width; int i; @@ -674,7 +676,7 @@ static void __init zone_sizes_init(void) NODE_DATA(i)->bdata = NODE_DATA(0)->bdata; free_area_init_node(i, zones_size, start, NULL); - printk(KERN_DEBUG " DMA zone: %ld per-cpu pages\n", + printk(KERN_DEBUG " Normal zone: %ld per-cpu pages\n", PFN_UP(node_percpu[i])); /* Track the type of memory on each node */ @@ -1312,6 +1314,8 @@ static void *__init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align) BUG_ON(size % PAGE_SIZE != 0); pfn_offset[nid] += size / PAGE_SIZE; + BUG_ON(node_percpu[nid] < size); + node_percpu[nid] -= size; if (percpu_pfn[cpu] == 0) percpu_pfn[cpu] = pfn; return pfn_to_kaddr(pfn); diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c index 1eb3b39e36c7..84a729e06ec4 100644 --- a/arch/tile/kernel/single_step.c +++ b/arch/tile/kernel/single_step.c @@ -56,7 +56,7 @@ enum mem_op { MEMOP_STORE_POSTINCR }; -static inline tile_bundle_bits set_BrOff_X1(tile_bundle_bits n, int32_t offset) +static inline tile_bundle_bits set_BrOff_X1(tile_bundle_bits n, s32 offset) { tile_bundle_bits result; @@ -254,6 +254,18 @@ P("\n"); return bundle; } +/* + * Called after execve() has started the new image. This allows us + * to reset the info state. Note that the the mmap'ed memory, if there + * was any, has already been unmapped by the exec. + */ +void single_step_execve(void) +{ + struct thread_info *ti = current_thread_info(); + kfree(ti->step_state); + ti->step_state = NULL; +} + /** * single_step_once() - entry point when single stepping has been triggered. * @regs: The machine register state @@ -373,7 +385,7 @@ void single_step_once(struct pt_regs *regs) /* branches */ case BRANCH_OPCODE_X1: { - int32_t offset = signExtend17(get_BrOff_X1(bundle)); + s32 offset = signExtend17(get_BrOff_X1(bundle)); /* * For branches, we use a rewriting trick to let the @@ -731,4 +743,9 @@ void single_step_once(struct pt_regs *regs) __insn_mtspr(SPR_SINGLE_STEP_EN_K_K, 1 << USER_PL); } +void single_step_execve(void) +{ + /* Nothing */ +} + #endif /* !__tilegx__ */ diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c index 9575b37a8b75..a4293102ef81 100644 --- a/arch/tile/kernel/smp.c +++ b/arch/tile/kernel/smp.c @@ -36,6 +36,22 @@ static unsigned long __iomem *ipi_mappings[NR_CPUS]; /* Set by smp_send_stop() to avoid recursive panics. */ static int stopping_cpus; +static void __send_IPI_many(HV_Recipient *recip, int nrecip, int tag) +{ + int sent = 0; + while (sent < nrecip) { + int rc = hv_send_message(recip, nrecip, + (HV_VirtAddr)&tag, sizeof(tag)); + if (rc < 0) { + if (!stopping_cpus) /* avoid recursive panic */ + panic("hv_send_message returned %d", rc); + break; + } + WARN_ONCE(rc == 0, "hv_send_message() returned zero\n"); + sent += rc; + } +} + void send_IPI_single(int cpu, int tag) { HV_Recipient recip = { @@ -43,14 +59,13 @@ void send_IPI_single(int cpu, int tag) .x = cpu % smp_width, .state = HV_TO_BE_SENT }; - int rc = hv_send_message(&recip, 1, (HV_VirtAddr)&tag, sizeof(tag)); - BUG_ON(rc <= 0); + __send_IPI_many(&recip, 1, tag); } void send_IPI_many(const struct cpumask *mask, int tag) { HV_Recipient recip[NR_CPUS]; - int cpu, sent; + int cpu; int nrecip = 0; int my_cpu = smp_processor_id(); for_each_cpu(cpu, mask) { @@ -61,17 +76,7 @@ void send_IPI_many(const struct cpumask *mask, int tag) r->x = cpu % smp_width; r->state = HV_TO_BE_SENT; } - sent = 0; - while (sent < nrecip) { - int rc = hv_send_message(recip, nrecip, - (HV_VirtAddr)&tag, sizeof(tag)); - if (rc <= 0) { - if (!stopping_cpus) /* avoid recursive panic */ - panic("hv_send_message returned %d", rc); - break; - } - sent += rc; - } + __send_IPI_many(recip, nrecip, tag); } void send_IPI_allbutself(int tag) diff --git a/arch/tile/kernel/stack.c b/arch/tile/kernel/stack.c index 0d54106be3d6..dd81713a90dc 100644 --- a/arch/tile/kernel/stack.c +++ b/arch/tile/kernel/stack.c @@ -44,13 +44,6 @@ static int in_kernel_stack(struct KBacktraceIterator *kbt, VirtualAddress sp) return sp >= kstack_base && sp < kstack_base + THREAD_SIZE; } -/* Is address in the specified kernel code? */ -static int in_kernel_text(VirtualAddress address) -{ - return (address >= MEM_SV_INTRPT && - address < MEM_SV_INTRPT + HPAGE_SIZE); -} - /* Is address valid for reading? */ static int valid_address(struct KBacktraceIterator *kbt, VirtualAddress address) { @@ -63,6 +56,23 @@ static int valid_address(struct KBacktraceIterator *kbt, VirtualAddress address) if (l1_pgtable == NULL) return 0; /* can't read user space in other tasks */ +#ifdef CONFIG_64BIT + /* Find the real l1_pgtable by looking in the l0_pgtable. */ + pte = l1_pgtable[HV_L0_INDEX(address)]; + if (!hv_pte_get_present(pte)) + return 0; + pfn = hv_pte_get_pfn(pte); + if (pte_huge(pte)) { + if (!pfn_valid(pfn)) { + pr_err("L0 huge page has bad pfn %#lx\n", pfn); + return 0; + } + return hv_pte_get_present(pte) && hv_pte_get_readable(pte); + } + page = pfn_to_page(pfn); + BUG_ON(PageHighMem(page)); /* No HIGHMEM on 64-bit. */ + l1_pgtable = (HV_PTE *)pfn_to_kaddr(pfn); +#endif pte = l1_pgtable[HV_L1_INDEX(address)]; if (!hv_pte_get_present(pte)) return 0; @@ -92,7 +102,7 @@ static bool read_memory_func(void *result, VirtualAddress address, { int retval; struct KBacktraceIterator *kbt = (struct KBacktraceIterator *)vkbt; - if (in_kernel_text(address)) { + if (__kernel_text_address(address)) { /* OK to read kernel code. */ } else if (address >= PAGE_OFFSET) { /* We only tolerate kernel-space reads of this task's stack */ @@ -132,7 +142,7 @@ static struct pt_regs *valid_fault_handler(struct KBacktraceIterator* kbt) } } if (EX1_PL(p->ex1) == KERNEL_PL && - in_kernel_text(p->pc) && + __kernel_text_address(p->pc) && in_kernel_stack(kbt, p->sp) && p->sp >= sp) { if (kbt->verbose) diff --git a/arch/tile/kernel/time.c b/arch/tile/kernel/time.c index f2e156e44692..49a605be94c5 100644 --- a/arch/tile/kernel/time.c +++ b/arch/tile/kernel/time.c @@ -224,3 +224,13 @@ int setup_profiling_timer(unsigned int multiplier) { return -EINVAL; } + +/* + * Use the tile timer to convert nsecs to core clock cycles, relying + * on it having the same frequency as SPR_CYCLE. + */ +cycles_t ns2cycles(unsigned long nsecs) +{ + struct clock_event_device *dev = &__get_cpu_var(tile_timer); + return ((u64)nsecs * dev->mult) >> dev->shift; +} diff --git a/arch/tile/kernel/vmlinux.lds.S b/arch/tile/kernel/vmlinux.lds.S index c6ce378e0678..38f64fafdc10 100644 --- a/arch/tile/kernel/vmlinux.lds.S +++ b/arch/tile/kernel/vmlinux.lds.S @@ -59,10 +59,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); VMLINUX_SYMBOL(_sinitdata) = .; - .init.page : AT (ADDR(.init.page) - LOAD_OFFSET) { - *(.init.page) - } :data =0 - INIT_DATA_SECTION(16) + INIT_DATA_SECTION(16) :data =0 PERCPU(L2_CACHE_BYTES, PAGE_SIZE) . = ALIGN(PAGE_SIZE); VMLINUX_SYMBOL(_einitdata) = .; diff --git a/arch/tile/lib/Makefile b/arch/tile/lib/Makefile index 93122d5b1558..0c26086ecbef 100644 --- a/arch/tile/lib/Makefile +++ b/arch/tile/lib/Makefile @@ -2,9 +2,8 @@ # Makefile for TILE-specific library files.. # -lib-y = cacheflush.o checksum.o cpumask.o delay.o \ - mb_incoherent.o uaccess.o memmove.o \ - memcpy_$(BITS).o memchr_$(BITS).o memset_$(BITS).o \ +lib-y = cacheflush.o checksum.o cpumask.o delay.o uaccess.o \ + memmove.o memcpy_$(BITS).o memchr_$(BITS).o memset_$(BITS).o \ strchr_$(BITS).o strlen_$(BITS).o ifeq ($(CONFIG_TILEGX),y) diff --git a/arch/tile/lib/atomic_32.c b/arch/tile/lib/atomic_32.c index 7a5cc706ab62..f02040d3614e 100644 --- a/arch/tile/lib/atomic_32.c +++ b/arch/tile/lib/atomic_32.c @@ -46,14 +46,13 @@ struct atomic_locks_on_cpu *atomic_lock_ptr[ATOMIC_HASH_L1_SIZE] #else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */ /* This page is remapped on startup to be hash-for-home. */ -int atomic_locks[PAGE_SIZE / sizeof(int) /* Only ATOMIC_HASH_SIZE is used */] - __attribute__((aligned(PAGE_SIZE), section(".bss.page_aligned"))); +int atomic_locks[PAGE_SIZE / sizeof(int)] __page_aligned_bss; #endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */ static inline int *__atomic_hashed_lock(volatile void *v) { - /* NOTE: this code must match "sys_cmpxchg" in kernel/intvec.S */ + /* NOTE: this code must match "sys_cmpxchg" in kernel/intvec_32.S */ #if ATOMIC_LOCKS_FOUND_VIA_TABLE() unsigned long i = (unsigned long) v & ((PAGE_SIZE-1) & -sizeof(long long)); diff --git a/arch/tile/lib/atomic_asm_32.S b/arch/tile/lib/atomic_asm_32.S index 5a5514b77e78..82f64cc63658 100644 --- a/arch/tile/lib/atomic_asm_32.S +++ b/arch/tile/lib/atomic_asm_32.S @@ -14,7 +14,7 @@ * Support routines for atomic operations. Each function takes: * * r0: address to manipulate - * r1: pointer to atomic lock guarding this operation (for FUTEX_LOCK_REG) + * r1: pointer to atomic lock guarding this operation (for ATOMIC_LOCK_REG) * r2: new value to write, or for cmpxchg/add_unless, value to compare against * r3: (cmpxchg/xchg_add_unless) new value to write or add; * (atomic64 ops) high word of value to write diff --git a/arch/tile/lib/cacheflush.c b/arch/tile/lib/cacheflush.c index 11b6164c2097..35c1d8ca5f38 100644 --- a/arch/tile/lib/cacheflush.c +++ b/arch/tile/lib/cacheflush.c @@ -21,3 +21,105 @@ void __flush_icache_range(unsigned long start, unsigned long end) { invalidate_icache((const void *)start, end - start, PAGE_SIZE); } + + +/* Force a load instruction to issue. */ +static inline void force_load(char *p) +{ + *(volatile char *)p; +} + +/* + * Flush and invalidate a VA range that is homed remotely on a single + * core (if "!hfh") or homed via hash-for-home (if "hfh"), waiting + * until the memory controller holds the flushed values. + */ +void finv_buffer_remote(void *buffer, size_t size, int hfh) +{ + char *p, *base; + size_t step_size, load_count; + const unsigned long STRIPE_WIDTH = 8192; + + /* + * Flush and invalidate the buffer out of the local L1/L2 + * and request the home cache to flush and invalidate as well. + */ + __finv_buffer(buffer, size); + + /* + * Wait for the home cache to acknowledge that it has processed + * all the flush-and-invalidate requests. This does not mean + * that the flushed data has reached the memory controller yet, + * but it does mean the home cache is processing the flushes. + */ + __insn_mf(); + + /* + * Issue a load to the last cache line, which can't complete + * until all the previously-issued flushes to the same memory + * controller have also completed. If we weren't striping + * memory, that one load would be sufficient, but since we may + * be, we also need to back up to the last load issued to + * another memory controller, which would be the point where + * we crossed an 8KB boundary (the granularity of striping + * across memory controllers). Keep backing up and doing this + * until we are before the beginning of the buffer, or have + * hit all the controllers. + * + * If we are flushing a hash-for-home buffer, it's even worse. + * Each line may be homed on a different tile, and each tile + * may have up to four lines that are on different + * controllers. So as we walk backwards, we have to touch + * enough cache lines to satisfy these constraints. In + * practice this ends up being close enough to "load from + * every cache line on a full memory stripe on each + * controller" that we simply do that, to simplify the logic. + * + * FIXME: See bug 9535 for some issues with this code. + */ + if (hfh) { + step_size = L2_CACHE_BYTES; + load_count = (STRIPE_WIDTH / L2_CACHE_BYTES) * + (1 << CHIP_LOG_NUM_MSHIMS()); + } else { + step_size = STRIPE_WIDTH; + load_count = (1 << CHIP_LOG_NUM_MSHIMS()); + } + + /* Load the last byte of the buffer. */ + p = (char *)buffer + size - 1; + force_load(p); + + /* Bump down to the end of the previous stripe or cache line. */ + p -= step_size; + p = (char *)((unsigned long)p | (step_size - 1)); + + /* Figure out how far back we need to go. */ + base = p - (step_size * (load_count - 2)); + if ((long)base < (long)buffer) + base = buffer; + + /* + * Fire all the loads we need. The MAF only has eight entries + * so we can have at most eight outstanding loads, so we + * unroll by that amount. + */ +#pragma unroll 8 + for (; p >= base; p -= step_size) + force_load(p); + + /* + * Repeat, but with inv's instead of loads, to get rid of the + * data we just loaded into our own cache and the old home L3. + * No need to unroll since inv's don't target a register. + */ + p = (char *)buffer + size - 1; + __insn_inv(p); + p -= step_size; + p = (char *)((unsigned long)p | (step_size - 1)); + for (; p >= base; p -= step_size) + __insn_inv(p); + + /* Wait for the load+inv's (and thus finvs) to have completed. */ + __insn_mf(); +} diff --git a/arch/tile/lib/delay.c b/arch/tile/lib/delay.c index 5801b03c13ef..cdacdd11d360 100644 --- a/arch/tile/lib/delay.c +++ b/arch/tile/lib/delay.c @@ -15,20 +15,31 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/thread_info.h> -#include <asm/fixmap.h> -#include <hv/hypervisor.h> +#include <asm/timex.h> void __udelay(unsigned long usecs) { - hv_nanosleep(usecs * 1000); + if (usecs > ULONG_MAX / 1000) { + WARN_ON_ONCE(usecs > ULONG_MAX / 1000); + usecs = ULONG_MAX / 1000; + } + __ndelay(usecs * 1000); } EXPORT_SYMBOL(__udelay); void __ndelay(unsigned long nsecs) { - hv_nanosleep(nsecs); + cycles_t target = get_cycles(); + target += ns2cycles(nsecs); + while (get_cycles() < target) + cpu_relax(); } EXPORT_SYMBOL(__ndelay); -/* FIXME: should be declared in a header somewhere. */ +void __delay(unsigned long cycles) +{ + cycles_t target = get_cycles() + cycles; + while (get_cycles() < target) + cpu_relax(); +} EXPORT_SYMBOL(__delay); diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c index 1509c5597653..49284fae9d09 100644 --- a/arch/tile/lib/exports.c +++ b/arch/tile/lib/exports.c @@ -29,6 +29,9 @@ EXPORT_SYMBOL(__put_user_8); EXPORT_SYMBOL(strnlen_user_asm); EXPORT_SYMBOL(strncpy_from_user_asm); EXPORT_SYMBOL(clear_user_asm); +EXPORT_SYMBOL(flush_user_asm); +EXPORT_SYMBOL(inv_user_asm); +EXPORT_SYMBOL(finv_user_asm); /* arch/tile/kernel/entry.S */ #include <linux/kernel.h> @@ -45,9 +48,6 @@ EXPORT_SYMBOL(__copy_from_user_zeroing); EXPORT_SYMBOL(__copy_in_user_inatomic); #endif -/* arch/tile/lib/mb_incoherent.S */ -EXPORT_SYMBOL(__mb_incoherent); - /* hypervisor glue */ #include <hv/hypervisor.h> EXPORT_SYMBOL(hv_dev_open); @@ -85,4 +85,8 @@ int64_t __muldi3(int64_t, int64_t); EXPORT_SYMBOL(__muldi3); uint64_t __lshrdi3(uint64_t, unsigned int); EXPORT_SYMBOL(__lshrdi3); +uint64_t __ashrdi3(uint64_t, unsigned int); +EXPORT_SYMBOL(__ashrdi3); +uint64_t __ashldi3(uint64_t, unsigned int); +EXPORT_SYMBOL(__ashldi3); #endif diff --git a/arch/tile/lib/mb_incoherent.S b/arch/tile/lib/mb_incoherent.S deleted file mode 100644 index 989ad7b68d5a..000000000000 --- a/arch/tile/lib/mb_incoherent.S +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Assembly code for invoking the HV's fence_incoherent syscall. - */ - -#include <linux/linkage.h> -#include <hv/syscall_public.h> -#include <arch/abi.h> -#include <arch/chip.h> - -#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS() - -/* - * Invoke the hypervisor's fence_incoherent syscall, which guarantees - * that all victims for cachelines homed on this tile have reached memory. - */ -STD_ENTRY(__mb_incoherent) - moveli TREG_SYSCALL_NR_NAME, HV_SYS_fence_incoherent - swint2 - jrp lr - STD_ENDPROC(__mb_incoherent) - -#endif diff --git a/arch/tile/lib/memcpy_tile64.c b/arch/tile/lib/memcpy_tile64.c index f7d4a6ad61e8..b2fe15e01075 100644 --- a/arch/tile/lib/memcpy_tile64.c +++ b/arch/tile/lib/memcpy_tile64.c @@ -96,7 +96,7 @@ static void memcpy_multicache(void *dest, const void *source, newsrc = __fix_to_virt(idx) + ((unsigned long)source & (PAGE_SIZE-1)); pmdp = pmd_offset(pud_offset(pgd_offset_k(newsrc), newsrc), newsrc); ptep = pte_offset_kernel(pmdp, newsrc); - *ptep = src_pte; /* set_pte() would be confused by this */ + __set_pte(ptep, src_pte); /* set_pte() would be confused by this */ local_flush_tlb_page(NULL, newsrc, PAGE_SIZE); /* Actually move the data. */ @@ -109,7 +109,7 @@ static void memcpy_multicache(void *dest, const void *source, */ src_pte = hv_pte_set_mode(src_pte, HV_PTE_MODE_CACHE_NO_L3); src_pte = hv_pte_set_writable(src_pte); /* need write access for inv */ - *ptep = src_pte; /* set_pte() would be confused by this */ + __set_pte(ptep, src_pte); /* set_pte() would be confused by this */ local_flush_tlb_page(NULL, newsrc, PAGE_SIZE); /* diff --git a/arch/tile/lib/spinlock_32.c b/arch/tile/lib/spinlock_32.c index 5cd1c4004eca..cb0999fb64b4 100644 --- a/arch/tile/lib/spinlock_32.c +++ b/arch/tile/lib/spinlock_32.c @@ -15,6 +15,7 @@ #include <linux/spinlock.h> #include <linux/module.h> #include <asm/processor.h> +#include <arch/spr_def.h> #include "spinlock_common.h" @@ -91,75 +92,75 @@ EXPORT_SYMBOL(arch_spin_unlock_wait); #define RD_COUNT_MASK ((1 << RD_COUNT_WIDTH) - 1) -/* Lock the word, spinning until there are no tns-ers. */ -static inline u32 get_rwlock(arch_rwlock_t *rwlock) -{ - u32 iterations = 0; - for (;;) { - u32 val = __insn_tns((int *)&rwlock->lock); - if (unlikely(val & 1)) { - delay_backoff(iterations++); - continue; - } - return val; - } -} - -int arch_read_trylock_slow(arch_rwlock_t *rwlock) -{ - u32 val = get_rwlock(rwlock); - int locked = (val << RD_COUNT_WIDTH) == 0; - rwlock->lock = val + (locked << RD_COUNT_SHIFT); - return locked; -} -EXPORT_SYMBOL(arch_read_trylock_slow); - -void arch_read_unlock_slow(arch_rwlock_t *rwlock) -{ - u32 val = get_rwlock(rwlock); - rwlock->lock = val - (1 << RD_COUNT_SHIFT); -} -EXPORT_SYMBOL(arch_read_unlock_slow); - -void arch_write_unlock_slow(arch_rwlock_t *rwlock, u32 val) +/* + * We can get the read lock if everything but the reader bits (which + * are in the high part of the word) is zero, i.e. no active or + * waiting writers, no tns. + * + * We guard the tns/store-back with an interrupt critical section to + * preserve the semantic that the same read lock can be acquired in an + * interrupt context. + */ +inline int arch_read_trylock(arch_rwlock_t *rwlock) { - u32 eq, mask = 1 << WR_CURR_SHIFT; - while (unlikely(val & 1)) { - /* Limited backoff since we are the highest-priority task. */ - relax(4); - val = __insn_tns((int *)&rwlock->lock); + u32 val; + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 1); + val = __insn_tns((int *)&rwlock->lock); + if (likely((val << _RD_COUNT_WIDTH) == 0)) { + val += 1 << RD_COUNT_SHIFT; + rwlock->lock = val; + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); + BUG_ON(val == 0); /* we don't expect wraparound */ + return 1; } - val = __insn_addb(val, mask); - eq = __insn_seqb(val, val << (WR_CURR_SHIFT - WR_NEXT_SHIFT)); - val = __insn_mz(eq & mask, val); - rwlock->lock = val; + if ((val & 1) == 0) + rwlock->lock = val; + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); + return 0; } -EXPORT_SYMBOL(arch_write_unlock_slow); +EXPORT_SYMBOL(arch_read_trylock); /* - * We spin until everything but the reader bits (which are in the high - * part of the word) are zero, i.e. no active or waiting writers, no tns. - * + * Spin doing arch_read_trylock() until we acquire the lock. * ISSUE: This approach can permanently starve readers. A reader who sees * a writer could instead take a ticket lock (just like a writer would), * and atomically enter read mode (with 1 reader) when it gets the ticket. - * This way both readers and writers will always make forward progress + * This way both readers and writers would always make forward progress * in a finite time. */ -void arch_read_lock_slow(arch_rwlock_t *rwlock, u32 val) +void arch_read_lock(arch_rwlock_t *rwlock) { u32 iterations = 0; - do { - if (!(val & 1)) - rwlock->lock = val; + while (unlikely(!arch_read_trylock(rwlock))) delay_backoff(iterations++); +} +EXPORT_SYMBOL(arch_read_lock); + +void arch_read_unlock(arch_rwlock_t *rwlock) +{ + u32 val, iterations = 0; + + mb(); /* guarantee anything modified under the lock is visible */ + for (;;) { + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 1); val = __insn_tns((int *)&rwlock->lock); - } while ((val << RD_COUNT_WIDTH) != 0); - rwlock->lock = val + (1 << RD_COUNT_SHIFT); + if (likely(val & 1) == 0) { + rwlock->lock = val - (1 << _RD_COUNT_SHIFT); + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); + break; + } + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); + delay_backoff(iterations++); + } } -EXPORT_SYMBOL(arch_read_lock_slow); +EXPORT_SYMBOL(arch_read_unlock); -void arch_write_lock_slow(arch_rwlock_t *rwlock, u32 val) +/* + * We don't need an interrupt critical section here (unlike for + * arch_read_lock) since we should never use a bare write lock where + * it could be interrupted by code that could try to re-acquire it. + */ +void arch_write_lock(arch_rwlock_t *rwlock) { /* * The trailing underscore on this variable (and curr_ below) @@ -168,6 +169,12 @@ void arch_write_lock_slow(arch_rwlock_t *rwlock, u32 val) */ u32 my_ticket_; u32 iterations = 0; + u32 val = __insn_tns((int *)&rwlock->lock); + + if (likely(val == 0)) { + rwlock->lock = 1 << _WR_NEXT_SHIFT; + return; + } /* * Wait until there are no readers, then bump up the next @@ -206,23 +213,47 @@ void arch_write_lock_slow(arch_rwlock_t *rwlock, u32 val) relax(4); } } -EXPORT_SYMBOL(arch_write_lock_slow); +EXPORT_SYMBOL(arch_write_lock); -int __tns_atomic_acquire(atomic_t *lock) +int arch_write_trylock(arch_rwlock_t *rwlock) { - int ret; - u32 iterations = 0; + u32 val = __insn_tns((int *)&rwlock->lock); - BUG_ON(__insn_mfspr(SPR_INTERRUPT_CRITICAL_SECTION)); - __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 1); + /* + * If a tns is in progress, or there's a waiting or active locker, + * or active readers, we can't take the lock, so give up. + */ + if (unlikely(val != 0)) { + if (!(val & 1)) + rwlock->lock = val; + return 0; + } - while ((ret = __insn_tns((void *)&lock->counter)) == 1) - delay_backoff(iterations++); - return ret; + /* Set the "next" field to mark it locked. */ + rwlock->lock = 1 << _WR_NEXT_SHIFT; + return 1; } +EXPORT_SYMBOL(arch_write_trylock); -void __tns_atomic_release(atomic_t *p, int v) +void arch_write_unlock(arch_rwlock_t *rwlock) { - p->counter = v; - __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); + u32 val, eq, mask; + + mb(); /* guarantee anything modified under the lock is visible */ + val = __insn_tns((int *)&rwlock->lock); + if (likely(val == (1 << _WR_NEXT_SHIFT))) { + rwlock->lock = 0; + return; + } + while (unlikely(val & 1)) { + /* Limited backoff since we are the highest-priority task. */ + relax(4); + val = __insn_tns((int *)&rwlock->lock); + } + mask = 1 << WR_CURR_SHIFT; + val = __insn_addb(val, mask); + eq = __insn_seqb(val, val << (WR_CURR_SHIFT - WR_NEXT_SHIFT)); + val = __insn_mz(eq & mask, val); + rwlock->lock = val; } +EXPORT_SYMBOL(arch_write_unlock); diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c index dcebfc831cd6..758f597f488c 100644 --- a/arch/tile/mm/fault.c +++ b/arch/tile/mm/fault.c @@ -655,14 +655,6 @@ struct intvec_state do_page_fault_ics(struct pt_regs *regs, int fault_num, } /* - * NOTE: the one other type of access that might bring us here - * are the memory ops in __tns_atomic_acquire/__tns_atomic_release, - * but we don't have to check specially for them since we can - * always safely return to the address of the fault and retry, - * since no separate atomic locks are involved. - */ - - /* * Now that we have released the atomic lock (if necessary), * it's safe to spin if the PTE that caused the fault was migrating. */ diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c index d78df3a6ee15..cbe6f4f9eca3 100644 --- a/arch/tile/mm/homecache.c +++ b/arch/tile/mm/homecache.c @@ -179,23 +179,46 @@ void flush_remote(unsigned long cache_pfn, unsigned long cache_control, panic("Unsafe to continue."); } +void flush_remote_page(struct page *page, int order) +{ + int i, pages = (1 << order); + for (i = 0; i < pages; ++i, ++page) { + void *p = kmap_atomic(page); + int hfh = 0; + int home = page_home(page); +#if CHIP_HAS_CBOX_HOME_MAP() + if (home == PAGE_HOME_HASH) + hfh = 1; + else +#endif + BUG_ON(home < 0 || home >= NR_CPUS); + finv_buffer_remote(p, PAGE_SIZE, hfh); + kunmap_atomic(p); + } +} + void homecache_evict(const struct cpumask *mask) { flush_remote(0, HV_FLUSH_EVICT_L2, mask, 0, 0, 0, NULL, NULL, 0); } -/* Return a mask of the cpus whose caches currently own these pages. */ -static void homecache_mask(struct page *page, int pages, - struct cpumask *home_mask) +/* + * Return a mask of the cpus whose caches currently own these pages. + * The return value is whether the pages are all coherently cached + * (i.e. none are immutable, incoherent, or uncached). + */ +static int homecache_mask(struct page *page, int pages, + struct cpumask *home_mask) { int i; + int cached_coherently = 1; cpumask_clear(home_mask); for (i = 0; i < pages; ++i) { int home = page_home(&page[i]); if (home == PAGE_HOME_IMMUTABLE || home == PAGE_HOME_INCOHERENT) { cpumask_copy(home_mask, cpu_possible_mask); - return; + return 0; } #if CHIP_HAS_CBOX_HOME_MAP() if (home == PAGE_HOME_HASH) { @@ -203,11 +226,14 @@ static void homecache_mask(struct page *page, int pages, continue; } #endif - if (home == PAGE_HOME_UNCACHED) + if (home == PAGE_HOME_UNCACHED) { + cached_coherently = 0; continue; + } BUG_ON(home < 0 || home >= NR_CPUS); cpumask_set_cpu(home, home_mask); } + return cached_coherently; } /* @@ -386,7 +412,7 @@ void homecache_change_page_home(struct page *page, int order, int home) pte_t *ptep = virt_to_pte(NULL, kva); pte_t pteval = *ptep; BUG_ON(!pte_present(pteval) || pte_huge(pteval)); - *ptep = pte_set_home(pteval, home); + __set_pte(ptep, pte_set_home(pteval, home)); } } diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c index 0b9ce69b0ee5..d6e87fda2fb2 100644 --- a/arch/tile/mm/init.c +++ b/arch/tile/mm/init.c @@ -53,22 +53,11 @@ #include "migrate.h" -/* - * We could set FORCE_MAX_ZONEORDER to "(HPAGE_SHIFT - PAGE_SHIFT + 1)" - * in the Tile Kconfig, but this generates configure warnings. - * Do it here and force people to get it right to compile this file. - * The problem is that with 4KB small pages and 16MB huge pages, - * the default value doesn't allow us to group enough small pages - * together to make up a huge page. - */ -#if CONFIG_FORCE_MAX_ZONEORDER < HPAGE_SHIFT - PAGE_SHIFT + 1 -# error "Change FORCE_MAX_ZONEORDER in arch/tile/Kconfig to match page size" -#endif - #define clear_pgd(pmdptr) (*(pmdptr) = hv_pte(0)) #ifndef __tilegx__ unsigned long VMALLOC_RESERVE = CONFIG_VMALLOC_RESERVE; +EXPORT_SYMBOL(VMALLOC_RESERVE); #endif DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -445,7 +434,7 @@ static pmd_t *__init get_pmd(pgd_t pgtables[], unsigned long va) /* Temporary page table we use for staging. */ static pgd_t pgtables[PTRS_PER_PGD] - __attribute__((section(".init.page"))); + __attribute__((aligned(HV_PAGE_TABLE_ALIGN))); /* * This maps the physical memory to kernel virtual address space, a total @@ -653,6 +642,17 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base) memcpy(pgd_base, pgtables, sizeof(pgtables)); __install_page_table(pgd_base, __get_cpu_var(current_asid), swapper_pgprot); + + /* + * We just read swapper_pgprot and thus brought it into the cache, + * with its new home & caching mode. When we start the other CPUs, + * they're going to reference swapper_pgprot via their initial fake + * VA-is-PA mappings, which cache everything locally. At that + * time, if it's in our cache with a conflicting home, the + * simulator's coherence checker will complain. So, flush it out + * of our cache; we're not going to ever use it again anyway. + */ + __insn_finv(&swapper_pgprot); } /* @@ -950,11 +950,7 @@ struct kmem_cache *pgd_cache; void __init pgtable_cache_init(void) { - pgd_cache = kmem_cache_create("pgd", - PTRS_PER_PGD*sizeof(pgd_t), - PTRS_PER_PGD*sizeof(pgd_t), - 0, - NULL); + pgd_cache = kmem_cache_create("pgd", SIZEOF_PGD, SIZEOF_PGD, 0, NULL); if (!pgd_cache) panic("pgtable_cache_init(): Cannot create pgd cache"); } @@ -989,7 +985,7 @@ static long __write_once initfree = 1; static int __init set_initfree(char *str) { long val; - if (strict_strtol(str, 0, &val)) { + if (strict_strtol(str, 0, &val) == 0) { initfree = val; pr_info("initfree: %s free init pages\n", initfree ? "will" : "won't"); diff --git a/arch/tile/mm/migrate_32.S b/arch/tile/mm/migrate_32.S index f738765cd1e6..ac01a7cdf77f 100644 --- a/arch/tile/mm/migrate_32.S +++ b/arch/tile/mm/migrate_32.S @@ -18,6 +18,7 @@ #include <linux/linkage.h> #include <linux/threads.h> #include <asm/page.h> +#include <asm/thread_info.h> #include <asm/types.h> #include <asm/asm-offsets.h> #include <hv/hypervisor.h> diff --git a/arch/tile/mm/pgtable.c b/arch/tile/mm/pgtable.c index 1f5430c53d0d..1a2b36f8866d 100644 --- a/arch/tile/mm/pgtable.c +++ b/arch/tile/mm/pgtable.c @@ -142,6 +142,76 @@ pte_t *_pte_offset_map(pmd_t *dir, unsigned long address) } #endif +/** + * shatter_huge_page() - ensure a given address is mapped by a small page. + * + * This function converts a huge PTE mapping kernel LOWMEM into a bunch + * of small PTEs with the same caching. No cache flush required, but we + * must do a global TLB flush. + * + * Any caller that wishes to modify a kernel mapping that might + * have been made with a huge page should call this function, + * since doing so properly avoids race conditions with installing the + * newly-shattered page and then flushing all the TLB entries. + * + * @addr: Address at which to shatter any existing huge page. + */ +void shatter_huge_page(unsigned long addr) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + unsigned long flags = 0; /* happy compiler */ +#ifdef __PAGETABLE_PMD_FOLDED + struct list_head *pos; +#endif + + /* Get a pointer to the pmd entry that we need to change. */ + addr &= HPAGE_MASK; + BUG_ON(pgd_addr_invalid(addr)); + BUG_ON(addr < PAGE_OFFSET); /* only for kernel LOWMEM */ + pgd = swapper_pg_dir + pgd_index(addr); + pud = pud_offset(pgd, addr); + BUG_ON(!pud_present(*pud)); + pmd = pmd_offset(pud, addr); + BUG_ON(!pmd_present(*pmd)); + if (!pmd_huge_page(*pmd)) + return; + + /* + * Grab the pgd_lock, since we may need it to walk the pgd_list, + * and since we need some kind of lock here to avoid races. + */ + spin_lock_irqsave(&pgd_lock, flags); + if (!pmd_huge_page(*pmd)) { + /* Lost the race to convert the huge page. */ + spin_unlock_irqrestore(&pgd_lock, flags); + return; + } + + /* Shatter the huge page into the preallocated L2 page table. */ + pmd_populate_kernel(&init_mm, pmd, + get_prealloc_pte(pte_pfn(*(pte_t *)pmd))); + +#ifdef __PAGETABLE_PMD_FOLDED + /* Walk every pgd on the system and update the pmd there. */ + list_for_each(pos, &pgd_list) { + pmd_t *copy_pmd; + pgd = list_to_pgd(pos) + pgd_index(addr); + pud = pud_offset(pgd, addr); + copy_pmd = pmd_offset(pud, addr); + __set_pmd(copy_pmd, *pmd); + } +#endif + + /* Tell every cpu to notice the change. */ + flush_remote(0, 0, NULL, addr, HPAGE_SIZE, HPAGE_SIZE, + cpu_possible_mask, NULL, 0); + + /* Hold the lock until the TLB flush is finished to avoid races. */ + spin_unlock_irqrestore(&pgd_lock, flags); +} + /* * List of all pgd's needed so it can invalidate entries in both cached * and uncached pgd's. This is essentially codepath-based locking @@ -184,9 +254,9 @@ static void pgd_ctor(pgd_t *pgd) BUG_ON(((u64 *)swapper_pg_dir)[pgd_index(MEM_USER_INTRPT)] != 0); #endif - clone_pgd_range(pgd + KERNEL_PGD_INDEX_START, - swapper_pg_dir + KERNEL_PGD_INDEX_START, - KERNEL_PGD_PTRS); + memcpy(pgd + KERNEL_PGD_INDEX_START, + swapper_pg_dir + KERNEL_PGD_INDEX_START, + KERNEL_PGD_PTRS * sizeof(pgd_t)); pgd_list_add(pgd); spin_unlock_irqrestore(&pgd_lock, flags); @@ -220,8 +290,11 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd) struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) { - gfp_t flags = GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO|__GFP_COMP; + gfp_t flags = GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO; struct page *p; +#if L2_USER_PGTABLE_ORDER > 0 + int i; +#endif #ifdef CONFIG_HIGHPTE flags |= __GFP_HIGHMEM; @@ -231,6 +304,18 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) if (p == NULL) return NULL; +#if L2_USER_PGTABLE_ORDER > 0 + /* + * Make every page have a page_count() of one, not just the first. + * We don't use __GFP_COMP since it doesn't look like it works + * correctly with tlb_remove_page(). + */ + for (i = 1; i < L2_USER_PGTABLE_PAGES; ++i) { + init_page_count(p+i); + inc_zone_page_state(p+i, NR_PAGETABLE); + } +#endif + pgtable_page_ctor(p); return p; } @@ -242,8 +327,15 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) */ void pte_free(struct mm_struct *mm, struct page *p) { + int i; + pgtable_page_dtor(p); - __free_pages(p, L2_USER_PGTABLE_ORDER); + __free_page(p); + + for (i = 1; i < L2_USER_PGTABLE_PAGES; ++i) { + __free_page(p+i); + dec_zone_page_state(p+i, NR_PAGETABLE); + } } void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte, @@ -252,18 +344,11 @@ void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte, int i; pgtable_page_dtor(pte); - tlb->need_flush = 1; - if (tlb_fast_mode(tlb)) { - struct page *pte_pages[L2_USER_PGTABLE_PAGES]; - for (i = 0; i < L2_USER_PGTABLE_PAGES; ++i) - pte_pages[i] = pte + i; - free_pages_and_swap_cache(pte_pages, L2_USER_PGTABLE_PAGES); - return; - } - for (i = 0; i < L2_USER_PGTABLE_PAGES; ++i) { - tlb->pages[tlb->nr++] = pte + i; - if (tlb->nr >= FREE_PTE_NR) - tlb_flush_mmu(tlb, 0, 0); + tlb_remove_page(tlb, pte); + + for (i = 1; i < L2_USER_PGTABLE_PAGES; ++i) { + tlb_remove_page(tlb, pte + i); + dec_zone_page_state(pte + i, NR_PAGETABLE); } } @@ -346,35 +431,51 @@ int get_remote_cache_cpu(pgprot_t prot) return x + y * smp_width; } -void set_pte_order(pte_t *ptep, pte_t pte, int order) +/* + * Convert a kernel VA to a PA and homing information. + */ +int va_to_cpa_and_pte(void *va, unsigned long long *cpa, pte_t *pte) { - unsigned long pfn = pte_pfn(pte); - struct page *page = pfn_to_page(pfn); + struct page *page = virt_to_page(va); + pte_t null_pte = { 0 }; - /* Update the home of a PTE if necessary */ - pte = pte_set_home(pte, page_home(page)); + *cpa = __pa(va); + /* Note that this is not writing a page table, just returning a pte. */ + *pte = pte_set_home(null_pte, page_home(page)); + + return 0; /* return non-zero if not hfh? */ +} +EXPORT_SYMBOL(va_to_cpa_and_pte); + +void __set_pte(pte_t *ptep, pte_t pte) +{ #ifdef __tilegx__ *ptep = pte; #else - /* - * When setting a PTE, write the high bits first, then write - * the low bits. This sets the "present" bit only after the - * other bits are in place. If a particular PTE update - * involves transitioning from one valid PTE to another, it - * may be necessary to call set_pte_order() more than once, - * transitioning via a suitable intermediate state. - * Note that this sequence also means that if we are transitioning - * from any migrating PTE to a non-migrating one, we will not - * see a half-updated PTE with the migrating bit off. - */ -#if HV_PTE_INDEX_PRESENT >= 32 || HV_PTE_INDEX_MIGRATING >= 32 -# error Must write the present and migrating bits last -#endif - ((u32 *)ptep)[1] = (u32)(pte_val(pte) >> 32); - barrier(); - ((u32 *)ptep)[0] = (u32)(pte_val(pte)); -#endif +# if HV_PTE_INDEX_PRESENT >= 32 || HV_PTE_INDEX_MIGRATING >= 32 +# error Must write the present and migrating bits last +# endif + if (pte_present(pte)) { + ((u32 *)ptep)[1] = (u32)(pte_val(pte) >> 32); + barrier(); + ((u32 *)ptep)[0] = (u32)(pte_val(pte)); + } else { + ((u32 *)ptep)[0] = (u32)(pte_val(pte)); + barrier(); + ((u32 *)ptep)[1] = (u32)(pte_val(pte) >> 32); + } +#endif /* __tilegx__ */ +} + +void set_pte(pte_t *ptep, pte_t pte) +{ + struct page *page = pfn_to_page(pte_pfn(pte)); + + /* Update the home of a PTE if necessary */ + pte = pte_set_home(pte, page_home(page)); + + __set_pte(ptep, pte); } /* Can this mm load a PTE with cached_priority set? */ diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index fe70a341bd8b..fac1a2002e67 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -7,7 +7,7 @@ menuconfig EDAC bool "EDAC (Error Detection And Correction) reporting" depends on HAS_IOMEM - depends on X86 || PPC + depends on X86 || PPC || TILE help EDAC is designed to report errors in the core system. These are low-level errors that are reported in the CPU or @@ -282,4 +282,12 @@ config EDAC_CPC925 a companion chip to the PowerPC 970 family of processors. +config EDAC_TILE + tristate "Tilera Memory Controller" + depends on EDAC_MM_EDAC && TILE + default y + help + Support for error detection and correction on the + Tilera memory controller. + endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index ba2898b3639b..3e239133e29e 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -54,3 +54,4 @@ obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o +obj-$(CONFIG_EDAC_TILE) += tile_edac.o diff --git a/drivers/edac/tile_edac.c b/drivers/edac/tile_edac.c new file mode 100644 index 000000000000..1d5cf06f6c6b --- /dev/null +++ b/drivers/edac/tile_edac.c @@ -0,0 +1,254 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * Tilera-specific EDAC driver. + * + * This source code is derived from the following driver: + * + * Cell MIC driver for ECC counting + * + * Copyright 2007 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/edac.h> +#include <hv/hypervisor.h> +#include <hv/drv_mshim_intf.h> + +#include "edac_core.h" + +#define DRV_NAME "tile-edac" + +/* Number of cs_rows needed per memory controller on TILEPro. */ +#define TILE_EDAC_NR_CSROWS 1 + +/* Number of channels per memory controller on TILEPro. */ +#define TILE_EDAC_NR_CHANS 1 + +/* Granularity of reported error in bytes on TILEPro. */ +#define TILE_EDAC_ERROR_GRAIN 8 + +/* TILE processor has multiple independent memory controllers. */ +struct platform_device *mshim_pdev[TILE_MAX_MSHIMS]; + +struct tile_edac_priv { + int hv_devhdl; /* Hypervisor device handle. */ + int node; /* Memory controller instance #. */ + unsigned int ce_count; /* + * Correctable-error counter + * kept by the driver. + */ +}; + +static void tile_edac_check(struct mem_ctl_info *mci) +{ + struct tile_edac_priv *priv = mci->pvt_info; + struct mshim_mem_error mem_error; + + if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&mem_error, + sizeof(struct mshim_mem_error), MSHIM_MEM_ERROR_OFF) != + sizeof(struct mshim_mem_error)) { + pr_err(DRV_NAME ": MSHIM_MEM_ERROR_OFF pread failure.\n"); + return; + } + + /* Check if the current error count is different from the saved one. */ + if (mem_error.sbe_count != priv->ce_count) { + dev_dbg(mci->dev, "ECC CE err on node %d\n", priv->node); + priv->ce_count = mem_error.sbe_count; + edac_mc_handle_ce(mci, 0, 0, 0, 0, 0, mci->ctl_name); + } +} + +/* + * Initialize the 'csrows' table within the mci control structure with the + * addressing of memory. + */ +static int __devinit tile_edac_init_csrows(struct mem_ctl_info *mci) +{ + struct csrow_info *csrow = &mci->csrows[0]; + struct tile_edac_priv *priv = mci->pvt_info; + struct mshim_mem_info mem_info; + + if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&mem_info, + sizeof(struct mshim_mem_info), MSHIM_MEM_INFO_OFF) != + sizeof(struct mshim_mem_info)) { + pr_err(DRV_NAME ": MSHIM_MEM_INFO_OFF pread failure.\n"); + return -1; + } + + if (mem_info.mem_ecc) + csrow->edac_mode = EDAC_SECDED; + else + csrow->edac_mode = EDAC_NONE; + switch (mem_info.mem_type) { + case DDR2: + csrow->mtype = MEM_DDR2; + break; + + case DDR3: + csrow->mtype = MEM_DDR3; + break; + + default: + return -1; + } + + csrow->first_page = 0; + csrow->nr_pages = mem_info.mem_size >> PAGE_SHIFT; + csrow->last_page = csrow->first_page + csrow->nr_pages - 1; + csrow->grain = TILE_EDAC_ERROR_GRAIN; + csrow->dtype = DEV_UNKNOWN; + + return 0; +} + +static int __devinit tile_edac_mc_probe(struct platform_device *pdev) +{ + char hv_file[32]; + int hv_devhdl; + struct mem_ctl_info *mci; + struct tile_edac_priv *priv; + int rc; + + sprintf(hv_file, "mshim/%d", pdev->id); + hv_devhdl = hv_dev_open((HV_VirtAddr)hv_file, 0); + if (hv_devhdl < 0) + return -EINVAL; + + /* A TILE MC has a single channel and one chip-select row. */ + mci = edac_mc_alloc(sizeof(struct tile_edac_priv), + TILE_EDAC_NR_CSROWS, TILE_EDAC_NR_CHANS, pdev->id); + if (mci == NULL) + return -ENOMEM; + priv = mci->pvt_info; + priv->node = pdev->id; + priv->hv_devhdl = hv_devhdl; + + mci->dev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR2; + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + + mci->mod_name = DRV_NAME; + mci->ctl_name = "TILEPro_Memory_Controller"; + mci->dev_name = dev_name(&pdev->dev); + mci->edac_check = tile_edac_check; + + /* + * Initialize the MC control structure 'csrows' table + * with the mapping and control information. + */ + if (tile_edac_init_csrows(mci)) { + /* No csrows found. */ + mci->edac_cap = EDAC_FLAG_NONE; + } else { + mci->edac_cap = EDAC_FLAG_SECDED; + } + + platform_set_drvdata(pdev, mci); + + /* Register with EDAC core */ + rc = edac_mc_add_mc(mci); + if (rc) { + dev_err(&pdev->dev, "failed to register with EDAC core\n"); + edac_mc_free(mci); + return rc; + } + + return 0; +} + +static int __devexit tile_edac_mc_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + edac_mc_del_mc(&pdev->dev); + if (mci) + edac_mc_free(mci); + return 0; +} + +static struct platform_driver tile_edac_mc_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = tile_edac_mc_probe, + .remove = __devexit_p(tile_edac_mc_remove), +}; + +/* + * Driver init routine. + */ +static int __init tile_edac_init(void) +{ + char hv_file[32]; + struct platform_device *pdev; + int i, err, num = 0; + + /* Only support POLL mode. */ + edac_op_state = EDAC_OPSTATE_POLL; + + err = platform_driver_register(&tile_edac_mc_driver); + if (err) + return err; + + for (i = 0; i < TILE_MAX_MSHIMS; i++) { + /* + * Not all memory controllers are configured such as in the + * case of a simulator. So we register only those mshims + * that are configured by the hypervisor. + */ + sprintf(hv_file, "mshim/%d", i); + if (hv_dev_open((HV_VirtAddr)hv_file, 0) < 0) + continue; + + pdev = platform_device_register_simple(DRV_NAME, i, NULL, 0); + if (IS_ERR(pdev)) + continue; + mshim_pdev[i] = pdev; + num++; + } + + if (num == 0) { + platform_driver_unregister(&tile_edac_mc_driver); + return -ENODEV; + } + return 0; +} + +/* + * Driver cleanup routine. + */ +static void __exit tile_edac_exit(void) +{ + int i; + + for (i = 0; i < TILE_MAX_MSHIMS; i++) { + struct platform_device *pdev = mshim_pdev[i]; + if (!pdev) + continue; + + platform_set_drvdata(pdev, NULL); + platform_device_unregister(pdev); + } + platform_driver_unregister(&tile_edac_mc_driver); +} + +module_init(tile_edac_init); +module_exit(tile_edac_exit); diff --git a/drivers/net/tile/tilepro.c b/drivers/net/tile/tilepro.c index 7cb301da7474..0825db6d883f 100644 --- a/drivers/net/tile/tilepro.c +++ b/drivers/net/tile/tilepro.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Tilera Corporation. All Rights Reserved. + * Copyright 2011 Tilera Corporation. All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -44,10 +44,6 @@ #include <linux/tcp.h> -/* There is no singlethread_cpu, so schedule work on the current cpu. */ -#define singlethread_cpu -1 - - /* * First, "tile_net_init_module()" initializes all four "devices" which * can be used by linux. @@ -73,15 +69,16 @@ * return, knowing we will be called again later. Otherwise, we * reenable the ingress interrupt, and call "napi_complete()". * + * HACK: Since disabling the ingress interrupt is not reliable, we + * ignore the interrupt if the global "active" flag is false. + * * * NOTE: The use of "native_driver" ensures that EPP exists, and that - * "epp_sendv" is legal, and that "LIPP" is being used. + * we are using "LIPP" and "LEPP". * * NOTE: Failing to free completions for an arbitrarily long time * (which is defined to be illegal) does in fact cause bizarre * problems. The "egress_timer" helps prevent this from happening. - * - * NOTE: The egress code can be interrupted by the interrupt handler. */ @@ -142,6 +139,7 @@ MODULE_AUTHOR("Tilera"); MODULE_LICENSE("GPL"); + /* * Queue of incoming packets for a specific cpu and device. * @@ -177,7 +175,7 @@ struct tile_net_cpu { struct tile_netio_queue queue; /* Statistics. */ struct tile_net_stats_t stats; - /* ISSUE: Is this needed? */ + /* True iff NAPI is enabled. */ bool napi_enabled; /* True if this tile has succcessfully registered with the IPP. */ bool registered; @@ -200,20 +198,20 @@ struct tile_net_cpu { struct tile_net_priv { /* Our network device. */ struct net_device *dev; - /* The actual egress queue. */ - lepp_queue_t *epp_queue; - /* Protects "epp_queue->cmd_tail" and "epp_queue->comp_tail" */ - spinlock_t cmd_lock; - /* Protects "epp_queue->comp_head". */ - spinlock_t comp_lock; + /* Pages making up the egress queue. */ + struct page *eq_pages; + /* Address of the actual egress queue. */ + lepp_queue_t *eq; + /* Protects "eq". */ + spinlock_t eq_lock; /* The hypervisor handle for this interface. */ int hv_devhdl; /* The intr bit mask that IDs this device. */ u32 intr_id; /* True iff "tile_net_open_aux()" has succeeded. */ - int partly_opened; - /* True iff "tile_net_open_inner()" has succeeded. */ - int fully_opened; + bool partly_opened; + /* True iff the device is "active". */ + bool active; /* Effective network cpus. */ struct cpumask network_cpus_map; /* Number of network cpus. */ @@ -228,6 +226,10 @@ struct tile_net_priv { struct tile_net_cpu *cpu[NR_CPUS]; }; +/* Log2 of the number of small pages needed for the egress queue. */ +#define EQ_ORDER get_order(sizeof(lepp_queue_t)) +/* Size of the egress queue's pages. */ +#define EQ_SIZE (1 << (PAGE_SHIFT + EQ_ORDER)) /* * The actual devices (xgbe0, xgbe1, gbe0, gbe1). @@ -284,7 +286,11 @@ static void net_printk(char *fmt, ...) */ static void dump_packet(unsigned char *data, unsigned long length, char *s) { + int my_cpu = smp_processor_id(); + unsigned long i; + char buf[128]; + static unsigned int count; pr_info("dump_packet(data %p, length 0x%lx s %s count 0x%x)\n", @@ -294,10 +300,12 @@ static void dump_packet(unsigned char *data, unsigned long length, char *s) for (i = 0; i < length; i++) { if ((i & 0xf) == 0) - sprintf(buf, "%8.8lx:", i); + sprintf(buf, "[%02d] %8.8lx:", my_cpu, i); sprintf(buf + strlen(buf), " %2.2x", data[i]); - if ((i & 0xf) == 0xf || i == length - 1) - pr_info("%s\n", buf); + if ((i & 0xf) == 0xf || i == length - 1) { + strcat(buf, "\n"); + pr_info("%s", buf); + } } } #endif @@ -351,60 +359,109 @@ static void tile_net_provide_linux_buffer(struct tile_net_cpu *info, /* * Provide a linux buffer for LIPP. + * + * Note that the ACTUAL allocation for each buffer is a "struct sk_buff", + * plus a chunk of memory that includes not only the requested bytes, but + * also NET_SKB_PAD bytes of initial padding, and a "struct skb_shared_info". + * + * Note that "struct skb_shared_info" is 88 bytes with 64K pages and + * 268 bytes with 4K pages (since the frags[] array needs 18 entries). + * + * Without jumbo packets, the maximum packet size will be 1536 bytes, + * and we use 2 bytes (NET_IP_ALIGN) of padding. ISSUE: If we told + * the hardware to clip at 1518 bytes instead of 1536 bytes, then we + * could save an entire cache line, but in practice, we don't need it. + * + * Since CPAs are 38 bits, and we can only encode the high 31 bits in + * a "linux_buffer_t", the low 7 bits must be zero, and thus, we must + * align the actual "va" mod 128. + * + * We assume that the underlying "head" will be aligned mod 64. Note + * that in practice, we have seen "head" NOT aligned mod 128 even when + * using 2048 byte allocations, which is surprising. + * + * If "head" WAS always aligned mod 128, we could change LIPP to + * assume that the low SIX bits are zero, and the 7th bit is one, that + * is, align the actual "va" mod 128 plus 64, which would be "free". + * + * For now, the actual "head" pointer points at NET_SKB_PAD bytes of + * padding, plus 28 or 92 bytes of extra padding, plus the sk_buff + * pointer, plus the NET_IP_ALIGN padding, plus 126 or 1536 bytes for + * the actual packet, plus 62 bytes of empty padding, plus some + * padding and the "struct skb_shared_info". + * + * With 64K pages, a large buffer thus needs 32+92+4+2+1536+62+88 + * bytes, or 1816 bytes, which fits comfortably into 2048 bytes. + * + * With 64K pages, a small buffer thus needs 32+92+4+2+126+88 + * bytes, or 344 bytes, which means we are wasting 64+ bytes, and + * could presumably increase the size of small buffers. + * + * With 4K pages, a large buffer thus needs 32+92+4+2+1536+62+268 + * bytes, or 1996 bytes, which fits comfortably into 2048 bytes. + * + * With 4K pages, a small buffer thus needs 32+92+4+2+126+268 + * bytes, or 524 bytes, which is annoyingly wasteful. + * + * Maybe we should increase LIPP_SMALL_PACKET_SIZE to 192? + * + * ISSUE: Maybe we should increase "NET_SKB_PAD" to 64? */ static bool tile_net_provide_needed_buffer(struct tile_net_cpu *info, bool small) { - /* ISSUE: What should we use here? */ +#if TILE_NET_MTU <= 1536 + /* Without "jumbo", 2 + 1536 should be sufficient. */ + unsigned int large_size = NET_IP_ALIGN + 1536; +#else + /* ISSUE: This has not been tested. */ unsigned int large_size = NET_IP_ALIGN + TILE_NET_MTU + 100; +#endif - /* Round up to ensure to avoid "false sharing" with last cache line. */ - unsigned int buffer_size = + /* Avoid "false sharing" with last cache line. */ + /* ISSUE: This is already done by "dev_alloc_skb()". */ + unsigned int len = (((small ? LIPP_SMALL_PACKET_SIZE : large_size) + CHIP_L2_LINE_SIZE() - 1) & -CHIP_L2_LINE_SIZE()); - /* - * ISSUE: Since CPAs are 38 bits, and we can only encode the - * high 31 bits in a "linux_buffer_t", the low 7 bits must be - * zero, and thus, we must align the actual "va" mod 128. - */ - const unsigned long align = 128; + unsigned int padding = 128 - NET_SKB_PAD; + unsigned int align; struct sk_buff *skb; void *va; struct sk_buff **skb_ptr; - /* Note that "dev_alloc_skb()" adds NET_SKB_PAD more bytes, */ - /* and also "reserves" that many bytes. */ - /* ISSUE: Can we "share" the NET_SKB_PAD bytes with "skb_ptr"? */ - int len = sizeof(*skb_ptr) + align + buffer_size; - - while (1) { - - /* Allocate (or fail). */ - skb = dev_alloc_skb(len); - if (skb == NULL) - return false; - - /* Make room for a back-pointer to 'skb'. */ - skb_reserve(skb, sizeof(*skb_ptr)); + /* Request 96 extra bytes for alignment purposes. */ + skb = dev_alloc_skb(len + padding); + if (skb == NULL) + return false; - /* Make sure we are aligned. */ - skb_reserve(skb, -(long)skb->data & (align - 1)); + /* Skip 32 or 96 bytes to align "data" mod 128. */ + align = -(long)skb->data & (128 - 1); + BUG_ON(align > padding); + skb_reserve(skb, align); - /* This address is given to IPP. */ - va = skb->data; + /* This address is given to IPP. */ + va = skb->data; - if (small) - break; + /* Buffers must not span a huge page. */ + BUG_ON(((((long)va & ~HPAGE_MASK) + len) & HPAGE_MASK) != 0); - /* ISSUE: This has never been observed! */ - /* Large buffers must not span a huge page. */ - if (((((long)va & ~HPAGE_MASK) + 1535) & HPAGE_MASK) == 0) - break; - pr_err("Leaking unaligned linux buffer at %p.\n", va); +#ifdef TILE_NET_PARANOIA +#if CHIP_HAS_CBOX_HOME_MAP() + if (hash_default) { + HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)va); + if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3) + panic("Non-HFH ingress buffer! VA=%p Mode=%d PTE=%llx", + va, hv_pte_get_mode(pte), hv_pte_val(pte)); } +#endif +#endif + + /* Invalidate the packet buffer. */ + if (!hash_default) + __inv_buffer(va, len); /* Skip two bytes to satisfy LIPP assumptions. */ /* Note that this aligns IP on a 16 byte boundary. */ @@ -415,23 +472,9 @@ static bool tile_net_provide_needed_buffer(struct tile_net_cpu *info, skb_ptr = va - sizeof(*skb_ptr); *skb_ptr = skb; - /* Invalidate the packet buffer. */ - if (!hash_default) - __inv_buffer(skb->data, buffer_size); - /* Make sure "skb_ptr" has been flushed. */ __insn_mf(); -#ifdef TILE_NET_PARANOIA -#if CHIP_HAS_CBOX_HOME_MAP() - if (hash_default) { - HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)va); - if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3) - panic("Non-coherent ingress buffer!"); - } -#endif -#endif - /* Provide the new buffer. */ tile_net_provide_linux_buffer(info, va, small); @@ -469,48 +512,64 @@ oops: * Grab some LEPP completions, and store them in "comps", of size * "comps_size", and return the number of completions which were * stored, so the caller can free them. - * - * If "pending" is not NULL, it will be set to true if there might - * still be some pending completions caused by this tile, else false. */ -static unsigned int tile_net_lepp_grab_comps(struct net_device *dev, +static unsigned int tile_net_lepp_grab_comps(lepp_queue_t *eq, struct sk_buff *comps[], unsigned int comps_size, - bool *pending) + unsigned int min_size) { - struct tile_net_priv *priv = netdev_priv(dev); - - lepp_queue_t *eq = priv->epp_queue; - unsigned int n = 0; - unsigned int comp_head; - unsigned int comp_busy; - unsigned int comp_tail; - - spin_lock(&priv->comp_lock); - - comp_head = eq->comp_head; - comp_busy = eq->comp_busy; - comp_tail = eq->comp_tail; + unsigned int comp_head = eq->comp_head; + unsigned int comp_busy = eq->comp_busy; while (comp_head != comp_busy && n < comps_size) { comps[n++] = eq->comps[comp_head]; LEPP_QINC(comp_head); } - if (pending != NULL) - *pending = (comp_head != comp_tail); + if (n < min_size) + return 0; eq->comp_head = comp_head; - spin_unlock(&priv->comp_lock); - return n; } /* + * Free some comps, and return true iff there are still some pending. + */ +static bool tile_net_lepp_free_comps(struct net_device *dev, bool all) +{ + struct tile_net_priv *priv = netdev_priv(dev); + + lepp_queue_t *eq = priv->eq; + + struct sk_buff *olds[64]; + unsigned int wanted = 64; + unsigned int i, n; + bool pending; + + spin_lock(&priv->eq_lock); + + if (all) + eq->comp_busy = eq->comp_tail; + + n = tile_net_lepp_grab_comps(eq, olds, wanted, 0); + + pending = (eq->comp_head != eq->comp_tail); + + spin_unlock(&priv->eq_lock); + + for (i = 0; i < n; i++) + kfree_skb(olds[i]); + + return pending; +} + + +/* * Make sure the egress timer is scheduled. * * Note that we use "schedule if not scheduled" logic instead of the more @@ -544,21 +603,11 @@ static void tile_net_handle_egress_timer(unsigned long arg) struct tile_net_cpu *info = (struct tile_net_cpu *)arg; struct net_device *dev = info->napi.dev; - struct sk_buff *olds[32]; - unsigned int wanted = 32; - unsigned int i, nolds = 0; - bool pending; - /* The timer is no longer scheduled. */ info->egress_timer_scheduled = false; - nolds = tile_net_lepp_grab_comps(dev, olds, wanted, &pending); - - for (i = 0; i < nolds; i++) - kfree_skb(olds[i]); - - /* Reschedule timer if needed. */ - if (pending) + /* Free comps, and reschedule timer if more are pending. */ + if (tile_net_lepp_free_comps(dev, false)) tile_net_schedule_egress_timer(info); } @@ -636,8 +685,39 @@ static bool is_dup_ack(char *s1, char *s2, unsigned int len) +static void tile_net_discard_aux(struct tile_net_cpu *info, int index) +{ + struct tile_netio_queue *queue = &info->queue; + netio_queue_impl_t *qsp = queue->__system_part; + netio_queue_user_impl_t *qup = &queue->__user_part; + + int index2_aux = index + sizeof(netio_pkt_t); + int index2 = + ((index2_aux == + qsp->__packet_receive_queue.__last_packet_plus_one) ? + 0 : index2_aux); + + netio_pkt_t *pkt = (netio_pkt_t *)((unsigned long) &qsp[1] + index); + + /* Extract the "linux_buffer_t". */ + unsigned int buffer = pkt->__packet.word; + + /* Convert "linux_buffer_t" to "va". */ + void *va = __va((phys_addr_t)(buffer >> 1) << 7); + + /* Acquire the associated "skb". */ + struct sk_buff **skb_ptr = va - sizeof(*skb_ptr); + struct sk_buff *skb = *skb_ptr; + + kfree_skb(skb); + + /* Consume this packet. */ + qup->__packet_receive_read = index2; +} + + /* - * Like "tile_net_handle_packets()", but just discard packets. + * Like "tile_net_poll()", but just discard packets. */ static void tile_net_discard_packets(struct net_device *dev) { @@ -650,32 +730,8 @@ static void tile_net_discard_packets(struct net_device *dev) while (qup->__packet_receive_read != qsp->__packet_receive_queue.__packet_write) { - int index = qup->__packet_receive_read; - - int index2_aux = index + sizeof(netio_pkt_t); - int index2 = - ((index2_aux == - qsp->__packet_receive_queue.__last_packet_plus_one) ? - 0 : index2_aux); - - netio_pkt_t *pkt = (netio_pkt_t *) - ((unsigned long) &qsp[1] + index); - - /* Extract the "linux_buffer_t". */ - unsigned int buffer = pkt->__packet.word; - - /* Convert "linux_buffer_t" to "va". */ - void *va = __va((phys_addr_t)(buffer >> 1) << 7); - - /* Acquire the associated "skb". */ - struct sk_buff **skb_ptr = va - sizeof(*skb_ptr); - struct sk_buff *skb = *skb_ptr; - - kfree_skb(skb); - - /* Consume this packet. */ - qup->__packet_receive_read = index2; + tile_net_discard_aux(info, index); } } @@ -704,7 +760,8 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index) netio_pkt_metadata_t *metadata = NETIO_PKT_METADATA(pkt); - /* Extract the packet size. */ + /* Extract the packet size. FIXME: Shouldn't the second line */ + /* get subtracted? Mostly moot, since it should be "zero". */ unsigned long len = (NETIO_PKT_CUSTOM_LENGTH(pkt) + NET_IP_ALIGN - NETIO_PACKET_PADDING); @@ -722,15 +779,6 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index) /* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */ unsigned char *buf = va + NET_IP_ALIGN; -#ifdef IGNORE_DUP_ACKS - - static int other; - static int final; - static int keep; - static int skip; - -#endif - /* Invalidate the packet buffer. */ if (!hash_default) __inv_buffer(buf, len); @@ -745,16 +793,8 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index) #ifdef TILE_NET_VERIFY_INGRESS if (!NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt) && NETIO_PKT_L4_CSUM_CALCULATED_M(metadata, pkt)) { - /* - * FIXME: This complains about UDP packets - * with a "zero" checksum (bug 6624). - */ -#ifdef TILE_NET_PANIC_ON_BAD - dump_packet(buf, len, "rx"); - panic("Bad L4 checksum."); -#else + /* Bug 6624: Includes UDP packets with a "zero" checksum. */ pr_warning("Bad L4 checksum on %d byte packet.\n", len); -#endif } if (!NETIO_PKT_L3_CSUM_CORRECT_M(metadata, pkt) && NETIO_PKT_L3_CSUM_CALCULATED_M(metadata, pkt)) { @@ -769,90 +809,29 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index) } break; case NETIO_PKT_STATUS_BAD: -#ifdef TILE_NET_PANIC_ON_BAD - dump_packet(buf, len, "rx"); - panic("Unexpected BAD packet."); -#else - pr_warning("Unexpected BAD %d byte packet.\n", len); -#endif + pr_warning("Unexpected BAD %ld byte packet.\n", len); } #endif filter = 0; + /* ISSUE: Filter TCP packets with "bad" checksums? */ + if (!(dev->flags & IFF_UP)) { /* Filter packets received before we're up. */ filter = 1; + } else if (NETIO_PKT_STATUS_M(metadata, pkt) == NETIO_PKT_STATUS_BAD) { + /* Filter "truncated" packets. */ + filter = 1; } else if (!(dev->flags & IFF_PROMISC)) { - /* - * FIXME: Implement HW multicast filter. - */ - if (is_unicast_ether_addr(buf)) { + /* FIXME: Implement HW multicast filter. */ + if (!is_multicast_ether_addr(buf)) { /* Filter packets not for our address. */ const u8 *mine = dev->dev_addr; filter = compare_ether_addr(mine, buf); } } -#ifdef IGNORE_DUP_ACKS - - if (len != 66) { - /* FIXME: Must check "is_tcp_ack(buf, len)" somehow. */ - - other++; - - } else if (index2 == - qsp->__packet_receive_queue.__packet_write) { - - final++; - - } else { - - netio_pkt_t *pkt2 = (netio_pkt_t *) - ((unsigned long) &qsp[1] + index2); - - netio_pkt_metadata_t *metadata2 = - NETIO_PKT_METADATA(pkt2); - - /* Extract the packet size. */ - unsigned long len2 = - (NETIO_PKT_CUSTOM_LENGTH(pkt2) + - NET_IP_ALIGN - NETIO_PACKET_PADDING); - - if (len2 == 66 && - NETIO_PKT_FLOW_HASH_M(metadata, pkt) == - NETIO_PKT_FLOW_HASH_M(metadata2, pkt2)) { - - /* Extract the "linux_buffer_t". */ - unsigned int buffer2 = pkt2->__packet.word; - - /* Convert "linux_buffer_t" to "va". */ - void *va2 = - __va((phys_addr_t)(buffer2 >> 1) << 7); - - /* Extract the packet data pointer. */ - /* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */ - unsigned char *buf2 = va2 + NET_IP_ALIGN; - - /* Invalidate the packet buffer. */ - if (!hash_default) - __inv_buffer(buf2, len2); - - if (is_dup_ack(buf, buf2, len)) { - skip++; - filter = 1; - } else { - keep++; - } - } - } - - if (net_ratelimit()) - pr_info("Other %d Final %d Keep %d Skip %d.\n", - other, final, keep, skip); - -#endif - if (filter) { /* ISSUE: Update "drop" statistics? */ @@ -877,10 +856,7 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index) /* NOTE: This call also sets "skb->dev = dev". */ skb->protocol = eth_type_trans(skb, dev); - /* ISSUE: Discard corrupt packets? */ - /* ISSUE: Discard packets with bad checksums? */ - - /* Avoid recomputing TCP/UDP checksums. */ + /* Avoid recomputing "good" TCP/UDP checksums. */ if (NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt)) skb->ip_summed = CHECKSUM_UNNECESSARY; @@ -912,9 +888,14 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index) /* * Handle some packets for the given device on the current CPU. * - * ISSUE: The "rotting packet" race condition occurs if a packet - * arrives after the queue appears to be empty, and before the - * hypervisor interrupt is re-enabled. + * If "tile_net_stop()" is called on some other tile while this + * function is running, we will return, hopefully before that + * other tile asks us to call "napi_disable()". + * + * The "rotting packet" race condition occurs if a packet arrives + * during the extremely narrow window between the queue appearing to + * be empty, and the ingress interrupt being re-enabled. This happens + * a LOT under heavy network load. */ static int tile_net_poll(struct napi_struct *napi, int budget) { @@ -928,7 +909,7 @@ static int tile_net_poll(struct napi_struct *napi, int budget) unsigned int work = 0; - while (1) { + while (priv->active) { int index = qup->__packet_receive_read; if (index == qsp->__packet_receive_queue.__packet_write) break; @@ -941,19 +922,24 @@ static int tile_net_poll(struct napi_struct *napi, int budget) napi_complete(&info->napi); - /* Re-enable hypervisor interrupts. */ + if (!priv->active) + goto done; + + /* Re-enable the ingress interrupt. */ enable_percpu_irq(priv->intr_id); - /* HACK: Avoid the "rotting packet" problem. */ + /* HACK: Avoid the "rotting packet" problem (see above). */ if (qup->__packet_receive_read != - qsp->__packet_receive_queue.__packet_write) - napi_schedule(&info->napi); - - /* ISSUE: Handle completions? */ + qsp->__packet_receive_queue.__packet_write) { + /* ISSUE: Sometimes this returns zero, presumably */ + /* because an interrupt was handled for this tile. */ + (void)napi_reschedule(&info->napi); + } done: - tile_net_provide_needed_buffers(info); + if (priv->active) + tile_net_provide_needed_buffers(info); return work; } @@ -961,6 +947,12 @@ done: /* * Handle an ingress interrupt for the given device on the current cpu. + * + * ISSUE: Sometimes this gets called after "disable_percpu_irq()" has + * been called! This is probably due to "pending hypervisor downcalls". + * + * ISSUE: Is there any race condition between the "napi_schedule()" here + * and the "napi_complete()" call above? */ static irqreturn_t tile_net_handle_ingress_interrupt(int irq, void *dev_ptr) { @@ -969,9 +961,15 @@ static irqreturn_t tile_net_handle_ingress_interrupt(int irq, void *dev_ptr) int my_cpu = smp_processor_id(); struct tile_net_cpu *info = priv->cpu[my_cpu]; - /* Disable hypervisor interrupt. */ + /* Disable the ingress interrupt. */ disable_percpu_irq(priv->intr_id); + /* Ignore unwanted interrupts. */ + if (!priv->active) + return IRQ_HANDLED; + + /* ISSUE: Sometimes "info->napi_enabled" is false here. */ + napi_schedule(&info->napi); return IRQ_HANDLED; @@ -1005,8 +1003,7 @@ static int tile_net_open_aux(struct net_device *dev) */ { int epp_home = hv_lotar_to_cpu(epp_lotar); - struct page *page = virt_to_page(priv->epp_queue); - homecache_change_page_home(page, 0, epp_home); + homecache_change_page_home(priv->eq_pages, EQ_ORDER, epp_home); } /* @@ -1015,9 +1012,9 @@ static int tile_net_open_aux(struct net_device *dev) { netio_ipp_address_t ea = { .va = 0, - .pa = __pa(priv->epp_queue), + .pa = __pa(priv->eq), .pte = hv_pte(0), - .size = PAGE_SIZE, + .size = EQ_SIZE, }; ea.pte = hv_pte_set_lotar(ea.pte, epp_lotar); ea.pte = hv_pte_set_mode(ea.pte, HV_PTE_MODE_CACHE_TILE_L3); @@ -1043,7 +1040,7 @@ static int tile_net_open_aux(struct net_device *dev) /* - * Register with hypervisor on each CPU. + * Register with hypervisor on the current CPU. * * Strangely, this function does important things even if it "fails", * which is especially common if the link is not up yet. Hopefully @@ -1092,7 +1089,8 @@ static void tile_net_register(void *dev_ptr) priv->cpu[my_cpu] = info; /* - * Register ourselves with the IPP. + * Register ourselves with LIPP. This does a lot of stuff, + * including invoking the LIPP registration code. */ ret = hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&config, @@ -1101,8 +1099,11 @@ static void tile_net_register(void *dev_ptr) PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_REGISTER_OFF) returned %d\n", ret); if (ret < 0) { - printk(KERN_DEBUG "hv_dev_pwrite NETIO_IPP_INPUT_REGISTER_OFF" - " failure %d\n", ret); + if (ret != NETIO_LINK_DOWN) { + printk(KERN_DEBUG "hv_dev_pwrite " + "NETIO_IPP_INPUT_REGISTER_OFF failure %d\n", + ret); + } info->link_down = (ret == NETIO_LINK_DOWN); return; } @@ -1145,15 +1146,47 @@ static void tile_net_register(void *dev_ptr) NETIO_IPP_GET_FASTIO_OFF); PDEBUG("hv_dev_pread(NETIO_IPP_GET_FASTIO_OFF) returned %d\n", ret); - netif_napi_add(dev, &info->napi, tile_net_poll, 64); - /* Now we are registered. */ info->registered = true; } /* - * Unregister with hypervisor on each CPU. + * Deregister with hypervisor on the current CPU. + * + * This simply discards all our credits, so no more packets will be + * delivered to this tile. There may still be packets in our queue. + * + * Also, disable the ingress interrupt. + */ +static void tile_net_deregister(void *dev_ptr) +{ + struct net_device *dev = (struct net_device *)dev_ptr; + struct tile_net_priv *priv = netdev_priv(dev); + int my_cpu = smp_processor_id(); + struct tile_net_cpu *info = priv->cpu[my_cpu]; + + /* Disable the ingress interrupt. */ + disable_percpu_irq(priv->intr_id); + + /* Do nothing else if not registered. */ + if (info == NULL || !info->registered) + return; + + { + struct tile_netio_queue *queue = &info->queue; + netio_queue_user_impl_t *qup = &queue->__user_part; + + /* Discard all our credits. */ + __netio_fastio_return_credits(qup->__fastio_index, -1); + } +} + + +/* + * Unregister with hypervisor on the current CPU. + * + * Also, disable the ingress interrupt. */ static void tile_net_unregister(void *dev_ptr) { @@ -1162,35 +1195,23 @@ static void tile_net_unregister(void *dev_ptr) int my_cpu = smp_processor_id(); struct tile_net_cpu *info = priv->cpu[my_cpu]; - int ret = 0; + int ret; int dummy = 0; - /* Do nothing if never registered. */ - if (info == NULL) - return; + /* Disable the ingress interrupt. */ + disable_percpu_irq(priv->intr_id); - /* Do nothing if already unregistered. */ - if (!info->registered) + /* Do nothing else if not registered. */ + if (info == NULL || !info->registered) return; - /* - * Unregister ourselves with LIPP. - */ + /* Unregister ourselves with LIPP/LEPP. */ ret = hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy, sizeof(dummy), NETIO_IPP_INPUT_UNREGISTER_OFF); - PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_UNREGISTER_OFF) returned %d\n", - ret); - if (ret < 0) { - /* FIXME: Just panic? */ - pr_err("hv_dev_pwrite NETIO_IPP_INPUT_UNREGISTER_OFF" - " failure %d\n", ret); - } + if (ret < 0) + panic("Failed to unregister with LIPP/LEPP!\n"); - /* - * Discard all packets still in our NetIO queue. Hopefully, - * once the unregister call is complete, there will be no - * packets still in flight on the IDN. - */ + /* Discard all packets still in our NetIO queue. */ tile_net_discard_packets(dev); /* Reset state. */ @@ -1200,11 +1221,6 @@ static void tile_net_unregister(void *dev_ptr) /* Cancel egress timer. */ del_timer(&info->egress_timer); info->egress_timer_scheduled = false; - - netif_napi_del(&info->napi); - - /* Now we are unregistered. */ - info->registered = false; } @@ -1212,18 +1228,28 @@ static void tile_net_unregister(void *dev_ptr) * Helper function for "tile_net_stop()". * * Also used to handle registration failure in "tile_net_open_inner()", - * when "fully_opened" is known to be false, and the various extra - * steps in "tile_net_stop()" are not necessary. ISSUE: It might be - * simpler if we could just call "tile_net_stop()" anyway. + * when the various extra steps in "tile_net_stop()" are not necessary. */ static void tile_net_stop_aux(struct net_device *dev) { struct tile_net_priv *priv = netdev_priv(dev); + int i; int dummy = 0; - /* Unregister all tiles, so LIPP will stop delivering packets. */ + /* + * Unregister all tiles, so LIPP will stop delivering packets. + * Also, delete all the "napi" objects (sequentially, to protect + * "dev->napi_list"). + */ on_each_cpu(tile_net_unregister, (void *)dev, 1); + for_each_online_cpu(i) { + struct tile_net_cpu *info = priv->cpu[i]; + if (info != NULL && info->registered) { + netif_napi_del(&info->napi); + info->registered = false; + } + } /* Stop LIPP/LEPP. */ if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy, @@ -1235,18 +1261,15 @@ static void tile_net_stop_aux(struct net_device *dev) /* - * Disable ingress interrupts for the given device on the current cpu. + * Disable NAPI for the given device on the current cpu. */ -static void tile_net_disable_intr(void *dev_ptr) +static void tile_net_stop_disable(void *dev_ptr) { struct net_device *dev = (struct net_device *)dev_ptr; struct tile_net_priv *priv = netdev_priv(dev); int my_cpu = smp_processor_id(); struct tile_net_cpu *info = priv->cpu[my_cpu]; - /* Disable hypervisor interrupt. */ - disable_percpu_irq(priv->intr_id); - /* Disable NAPI if needed. */ if (info != NULL && info->napi_enabled) { napi_disable(&info->napi); @@ -1256,21 +1279,24 @@ static void tile_net_disable_intr(void *dev_ptr) /* - * Enable ingress interrupts for the given device on the current cpu. + * Enable NAPI and the ingress interrupt for the given device + * on the current cpu. + * + * ISSUE: Only do this for "network cpus"? */ -static void tile_net_enable_intr(void *dev_ptr) +static void tile_net_open_enable(void *dev_ptr) { struct net_device *dev = (struct net_device *)dev_ptr; struct tile_net_priv *priv = netdev_priv(dev); int my_cpu = smp_processor_id(); struct tile_net_cpu *info = priv->cpu[my_cpu]; - /* Enable hypervisor interrupt. */ - enable_percpu_irq(priv->intr_id); - /* Enable NAPI. */ napi_enable(&info->napi); info->napi_enabled = true; + + /* Enable the ingress interrupt. */ + enable_percpu_irq(priv->intr_id); } @@ -1288,8 +1314,9 @@ static int tile_net_open_inner(struct net_device *dev) int my_cpu = smp_processor_id(); struct tile_net_cpu *info; struct tile_netio_queue *queue; - unsigned int irq; + int result = 0; int i; + int dummy = 0; /* * First try to register just on the local CPU, and handle any @@ -1307,42 +1334,52 @@ static int tile_net_open_inner(struct net_device *dev) /* * Now register everywhere else. If any registration fails, * even for "link down" (which might not be possible), we - * clean up using "tile_net_stop_aux()". + * clean up using "tile_net_stop_aux()". Also, add all the + * "napi" objects (sequentially, to protect "dev->napi_list"). + * ISSUE: Only use "netif_napi_add()" for "network cpus"? */ smp_call_function(tile_net_register, (void *)dev, 1); for_each_online_cpu(i) { - if (!priv->cpu[i]->registered) { - tile_net_stop_aux(dev); - return -EAGAIN; - } + struct tile_net_cpu *info = priv->cpu[i]; + if (info->registered) + netif_napi_add(dev, &info->napi, tile_net_poll, 64); + else + result = -EAGAIN; + } + if (result != 0) { + tile_net_stop_aux(dev); + return result; } queue = &info->queue; - /* - * Set the device intr bit mask. - * The tile_net_register above sets per tile __intr_id. - */ - priv->intr_id = queue->__system_part->__intr_id; - BUG_ON(!priv->intr_id); - - /* - * Register the device interrupt handler. - * The __ffs() function returns the index into the interrupt handler - * table from the interrupt bit mask which should have one bit - * and one bit only set. - */ - irq = __ffs(priv->intr_id); - tile_irq_activate(irq, TILE_IRQ_PERCPU); - BUG_ON(request_irq(irq, tile_net_handle_ingress_interrupt, - 0, dev->name, (void *)dev) != 0); + if (priv->intr_id == 0) { + unsigned int irq; - /* ISSUE: How could "priv->fully_opened" ever be "true" here? */ - - if (!priv->fully_opened) { + /* + * Acquire the irq allocated by the hypervisor. Every + * queue gets the same irq. The "__intr_id" field is + * "1 << irq", so we use "__ffs()" to extract "irq". + */ + priv->intr_id = queue->__system_part->__intr_id; + BUG_ON(priv->intr_id == 0); + irq = __ffs(priv->intr_id); - int dummy = 0; + /* + * Register the ingress interrupt handler for this + * device, permanently. + * + * We used to call "free_irq()" in "tile_net_stop()", + * and then re-register the handler here every time, + * but that caused DNP errors in "handle_IRQ_event()" + * because "desc->action" was NULL. See bug 9143. + */ + tile_irq_activate(irq, TILE_IRQ_PERCPU); + BUG_ON(request_irq(irq, tile_net_handle_ingress_interrupt, + 0, dev->name, (void *)dev) != 0); + } + { /* Allocate initial buffers. */ int max_buffers = @@ -1359,18 +1396,21 @@ static int tile_net_open_inner(struct net_device *dev) if (info->num_needed_small_buffers != 0 || info->num_needed_large_buffers != 0) panic("Insufficient memory for buffer stack!"); + } - /* Start LIPP/LEPP and activate "ingress" at the shim. */ - if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy, - sizeof(dummy), NETIO_IPP_INPUT_INIT_OFF) < 0) - panic("Failed to activate the LIPP Shim!\n"); + /* We are about to be active. */ + priv->active = true; - priv->fully_opened = 1; - } + /* Make sure "active" is visible to all tiles. */ + mb(); - /* On each tile, enable the hypervisor to trigger interrupts. */ - /* ISSUE: Do this before starting LIPP/LEPP? */ - on_each_cpu(tile_net_enable_intr, (void *)dev, 1); + /* On each tile, enable NAPI and the ingress interrupt. */ + on_each_cpu(tile_net_open_enable, (void *)dev, 1); + + /* Start LIPP/LEPP and activate "ingress" at the shim. */ + if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy, + sizeof(dummy), NETIO_IPP_INPUT_INIT_OFF) < 0) + panic("Failed to activate the LIPP Shim!\n"); /* Start our transmit queue. */ netif_start_queue(dev); @@ -1396,9 +1436,9 @@ static void tile_net_open_retry(struct work_struct *w) * ourselves to try again later; otherwise, tell Linux we now have * a working link. ISSUE: What if the return value is negative? */ - if (tile_net_open_inner(priv->dev)) - schedule_delayed_work_on(singlethread_cpu, &priv->retry_work, - TILE_NET_RETRY_INTERVAL); + if (tile_net_open_inner(priv->dev) != 0) + schedule_delayed_work(&priv->retry_work, + TILE_NET_RETRY_INTERVAL); else netif_carrier_on(priv->dev); } @@ -1412,8 +1452,8 @@ static void tile_net_open_retry(struct work_struct *w) * The open entry point is called when a network interface is made * active by the system (IFF_UP). At this point all resources needed * for transmit and receive operations are allocated, the interrupt - * handler is registered with the OS, the watchdog timer is started, - * and the stack is notified that the interface is ready. + * handler is registered with the OS (if needed), the watchdog timer + * is started, and the stack is notified that the interface is ready. * * If the actual link is not available yet, then we tell Linux that * we have no carrier, and we keep checking until the link comes up. @@ -1468,6 +1508,10 @@ static int tile_net_open(struct net_device *dev) #endif priv->partly_opened = 1; + + } else { + /* FIXME: Is this possible? */ + /* printk("Already partly opened.\n"); */ } /* @@ -1487,57 +1531,17 @@ static int tile_net_open(struct net_device *dev) * and then remember to try again later. */ netif_carrier_off(dev); - schedule_delayed_work_on(singlethread_cpu, &priv->retry_work, - TILE_NET_RETRY_INTERVAL); + schedule_delayed_work(&priv->retry_work, TILE_NET_RETRY_INTERVAL); return 0; } -/* - * Disables a network interface. - * - * Returns 0, this is not allowed to fail. - * - * The close entry point is called when an interface is de-activated - * by the OS. The hardware is still under the drivers control, but - * needs to be disabled. A global MAC reset is issued to stop the - * hardware, and all transmit and receive resources are freed. - * - * ISSUE: Can this can be called while "tile_net_poll()" is running? - */ -static int tile_net_stop(struct net_device *dev) +static int tile_net_drain_lipp_buffers(struct tile_net_priv *priv) { - struct tile_net_priv *priv = netdev_priv(dev); - - bool pending = true; - - PDEBUG("tile_net_stop()\n"); - - /* ISSUE: Only needed if not yet fully open. */ - cancel_delayed_work_sync(&priv->retry_work); - - /* Can't transmit any more. */ - netif_stop_queue(dev); - - /* - * Disable hypervisor interrupts on each tile. - */ - on_each_cpu(tile_net_disable_intr, (void *)dev, 1); - - /* - * Unregister the interrupt handler. - * The __ffs() function returns the index into the interrupt handler - * table from the interrupt bit mask which should have one bit - * and one bit only set. - */ - if (priv->intr_id) - free_irq(__ffs(priv->intr_id), dev); - - /* - * Drain all the LIPP buffers. - */ + int n = 0; + /* Drain all the LIPP buffers. */ while (true) { int buffer; @@ -1560,43 +1564,105 @@ static int tile_net_stop(struct net_device *dev) kfree_skb(skb); } + + n++; } - /* Stop LIPP/LEPP. */ - tile_net_stop_aux(dev); + return n; +} - priv->fully_opened = 0; +/* + * Disables a network interface. + * + * Returns 0, this is not allowed to fail. + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + * + * ISSUE: How closely does "netif_running(dev)" mirror "priv->active"? + * + * Before we are called by "__dev_close()", "netif_running()" will + * have been cleared, so no NEW calls to "tile_net_poll()" will be + * made by "netpoll_poll_dev()". + * + * Often, this can cause some tiles to still have packets in their + * queues, so we must call "tile_net_discard_packets()" later. + * + * Note that some other tile may still be INSIDE "tile_net_poll()", + * and in fact, many will be, if there is heavy network load. + * + * Calling "on_each_cpu(tile_net_stop_disable, (void *)dev, 1)" when + * any tile is still "napi_schedule()"'d will induce a horrible crash + * when "msleep()" is called. This includes tiles which are inside + * "tile_net_poll()" which have not yet called "napi_complete()". + * + * So, we must first try to wait long enough for other tiles to finish + * with any current "tile_net_poll()" call, and, hopefully, to clear + * the "scheduled" flag. ISSUE: It is unclear what happens to tiles + * which have called "napi_schedule()" but which had not yet tried to + * call "tile_net_poll()", or which exhausted their budget inside + * "tile_net_poll()" just before this function was called. + */ +static int tile_net_stop(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + + PDEBUG("tile_net_stop()\n"); + /* Start discarding packets. */ + priv->active = false; + + /* Make sure "active" is visible to all tiles. */ + mb(); /* - * XXX: ISSUE: It appears that, in practice anyway, by the - * time we get here, there are no pending completions. + * On each tile, make sure no NEW packets get delivered, and + * disable the ingress interrupt. + * + * Note that the ingress interrupt can fire AFTER this, + * presumably due to packets which were recently delivered, + * but it will have no effect. */ - while (pending) { + on_each_cpu(tile_net_deregister, (void *)dev, 1); - struct sk_buff *olds[32]; - unsigned int wanted = 32; - unsigned int i, nolds = 0; + /* Optimistically drain LIPP buffers. */ + (void)tile_net_drain_lipp_buffers(priv); - nolds = tile_net_lepp_grab_comps(dev, olds, - wanted, &pending); + /* ISSUE: Only needed if not yet fully open. */ + cancel_delayed_work_sync(&priv->retry_work); - /* ISSUE: We have never actually seen this debug spew. */ - if (nolds != 0) - pr_info("During tile_net_stop(), grabbed %d comps.\n", - nolds); + /* Can't transmit any more. */ + netif_stop_queue(dev); - for (i = 0; i < nolds; i++) - kfree_skb(olds[i]); - } + /* Disable NAPI on each tile. */ + on_each_cpu(tile_net_stop_disable, (void *)dev, 1); + + /* + * Drain any remaining LIPP buffers. NOTE: This "printk()" + * has never been observed, but in theory it could happen. + */ + if (tile_net_drain_lipp_buffers(priv) != 0) + printk("Had to drain some extra LIPP buffers!\n"); + /* Stop LIPP/LEPP. */ + tile_net_stop_aux(dev); + + /* + * ISSUE: It appears that, in practice anyway, by the time we + * get here, there are no pending completions, but just in case, + * we free (all of) them anyway. + */ + while (tile_net_lepp_free_comps(dev, true)) + /* loop */; /* Wipe the EPP queue. */ - memset(priv->epp_queue, 0, sizeof(lepp_queue_t)); + memset(priv->eq, 0, sizeof(lepp_queue_t)); /* Evict the EPP queue. */ - finv_buffer(priv->epp_queue, PAGE_SIZE); + finv_buffer(priv->eq, EQ_SIZE); return 0; } @@ -1620,7 +1686,7 @@ static unsigned int tile_net_tx_frags(lepp_frag_t *frags, if (b_len != 0) { if (!hash_default) - finv_buffer_remote(b_data, b_len); + finv_buffer_remote(b_data, b_len, 0); cpa = __pa(b_data); frags[n].cpa_lo = cpa; @@ -1643,7 +1709,7 @@ static unsigned int tile_net_tx_frags(lepp_frag_t *frags, if (!hash_default) { void *va = pfn_to_kaddr(pfn) + f->page_offset; BUG_ON(PageHighMem(f->page)); - finv_buffer_remote(va, f->size); + finv_buffer_remote(va, f->size, 0); } cpa = ((phys_addr_t)pfn << PAGE_SHIFT) + f->page_offset; @@ -1742,17 +1808,15 @@ static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev) unsigned long irqflags; - lepp_queue_t *eq = priv->epp_queue; + lepp_queue_t *eq = priv->eq; - struct sk_buff *olds[4]; - unsigned int wanted = 4; + struct sk_buff *olds[8]; + unsigned int wanted = 8; unsigned int i, nolds = 0; unsigned int cmd_head, cmd_tail, cmd_next; unsigned int comp_tail; - unsigned int free_slots; - /* Paranoia. */ BUG_ON(skb->protocol != htons(ETH_P_IP)); @@ -1780,34 +1844,32 @@ static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev) /* Enqueue the command. */ - spin_lock_irqsave(&priv->cmd_lock, irqflags); + spin_lock_irqsave(&priv->eq_lock, irqflags); /* * Handle completions if needed to make room. * HACK: Spin until there is sufficient room. */ - free_slots = lepp_num_free_comp_slots(eq); - if (free_slots < 1) { -spin: - nolds += tile_net_lepp_grab_comps(dev, olds + nolds, - wanted - nolds, NULL); - if (lepp_num_free_comp_slots(eq) < 1) - goto spin; + if (lepp_num_free_comp_slots(eq) == 0) { + nolds = tile_net_lepp_grab_comps(eq, olds, wanted, 0); + if (nolds == 0) { +busy: + spin_unlock_irqrestore(&priv->eq_lock, irqflags); + return NETDEV_TX_BUSY; + } } cmd_head = eq->cmd_head; cmd_tail = eq->cmd_tail; - /* NOTE: The "gotos" below are untested. */ - /* Prepare to advance, detecting full queue. */ cmd_next = cmd_tail + cmd_size; if (cmd_tail < cmd_head && cmd_next >= cmd_head) - goto spin; + goto busy; if (cmd_next > LEPP_CMD_LIMIT) { cmd_next = 0; if (cmd_next == cmd_head) - goto spin; + goto busy; } /* Copy the command. */ @@ -1823,14 +1885,18 @@ spin: eq->comp_tail = comp_tail; /* Flush before allowing LEPP to handle the command. */ + /* ISSUE: Is this the optimal location for the flush? */ __insn_mf(); eq->cmd_tail = cmd_tail; - spin_unlock_irqrestore(&priv->cmd_lock, irqflags); - + /* NOTE: Using "4" here is more efficient than "0" or "2", */ + /* and, strangely, more efficient than pre-checking the number */ + /* of available completions, and comparing it to 4. */ if (nolds == 0) - nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL); + nolds = tile_net_lepp_grab_comps(eq, olds, wanted, 4); + + spin_unlock_irqrestore(&priv->eq_lock, irqflags); /* Handle completions. */ for (i = 0; i < nolds; i++) @@ -1870,10 +1936,10 @@ static int tile_net_tx(struct sk_buff *skb, struct net_device *dev) unsigned int num_frags; - lepp_queue_t *eq = priv->epp_queue; + lepp_queue_t *eq = priv->eq; - struct sk_buff *olds[4]; - unsigned int wanted = 4; + struct sk_buff *olds[8]; + unsigned int wanted = 8; unsigned int i, nolds = 0; unsigned int cmd_size = sizeof(lepp_cmd_t); @@ -1883,8 +1949,6 @@ static int tile_net_tx(struct sk_buff *skb, struct net_device *dev) lepp_cmd_t cmds[LEPP_MAX_FRAGS]; - unsigned int free_slots; - /* * This is paranoia, since we think that if the link doesn't come @@ -1905,7 +1969,8 @@ static int tile_net_tx(struct sk_buff *skb, struct net_device *dev) if (hash_default) { HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)data); if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3) - panic("Non-coherent egress buffer!"); + panic("Non-HFH egress buffer! VA=%p Mode=%d PTE=%llx", + data, hv_pte_get_mode(pte), hv_pte_val(pte)); } #endif #endif @@ -1958,37 +2023,35 @@ static int tile_net_tx(struct sk_buff *skb, struct net_device *dev) /* Enqueue the commands. */ - spin_lock_irqsave(&priv->cmd_lock, irqflags); + spin_lock_irqsave(&priv->eq_lock, irqflags); /* * Handle completions if needed to make room. * HACK: Spin until there is sufficient room. */ - free_slots = lepp_num_free_comp_slots(eq); - if (free_slots < 1) { -spin: - nolds += tile_net_lepp_grab_comps(dev, olds + nolds, - wanted - nolds, NULL); - if (lepp_num_free_comp_slots(eq) < 1) - goto spin; + if (lepp_num_free_comp_slots(eq) == 0) { + nolds = tile_net_lepp_grab_comps(eq, olds, wanted, 0); + if (nolds == 0) { +busy: + spin_unlock_irqrestore(&priv->eq_lock, irqflags); + return NETDEV_TX_BUSY; + } } cmd_head = eq->cmd_head; cmd_tail = eq->cmd_tail; - /* NOTE: The "gotos" below are untested. */ - /* Copy the commands, or fail. */ for (i = 0; i < num_frags; i++) { /* Prepare to advance, detecting full queue. */ cmd_next = cmd_tail + cmd_size; if (cmd_tail < cmd_head && cmd_next >= cmd_head) - goto spin; + goto busy; if (cmd_next > LEPP_CMD_LIMIT) { cmd_next = 0; if (cmd_next == cmd_head) - goto spin; + goto busy; } /* Copy the command. */ @@ -2005,14 +2068,18 @@ spin: eq->comp_tail = comp_tail; /* Flush before allowing LEPP to handle the command. */ + /* ISSUE: Is this the optimal location for the flush? */ __insn_mf(); eq->cmd_tail = cmd_tail; - spin_unlock_irqrestore(&priv->cmd_lock, irqflags); - + /* NOTE: Using "4" here is more efficient than "0" or "2", */ + /* and, strangely, more efficient than pre-checking the number */ + /* of available completions, and comparing it to 4. */ if (nolds == 0) - nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL); + nolds = tile_net_lepp_grab_comps(eq, olds, wanted, 4); + + spin_unlock_irqrestore(&priv->eq_lock, irqflags); /* Handle completions. */ for (i = 0; i < nolds; i++) @@ -2261,7 +2328,6 @@ static struct net_device *tile_net_dev_init(const char *name) int ret; struct net_device *dev; struct tile_net_priv *priv; - struct page *page; /* * Allocate the device structure. This allocates "priv", calls @@ -2285,23 +2351,21 @@ static struct net_device *tile_net_dev_init(const char *name) INIT_DELAYED_WORK(&priv->retry_work, tile_net_open_retry); - spin_lock_init(&priv->cmd_lock); - spin_lock_init(&priv->comp_lock); + spin_lock_init(&priv->eq_lock); - /* Allocate "epp_queue". */ - BUG_ON(get_order(sizeof(lepp_queue_t)) != 0); - page = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0); - if (!page) { + /* Allocate "eq". */ + priv->eq_pages = alloc_pages(GFP_KERNEL | __GFP_ZERO, EQ_ORDER); + if (!priv->eq_pages) { free_netdev(dev); return NULL; } - priv->epp_queue = page_address(page); + priv->eq = page_address(priv->eq_pages); /* Register the network device. */ ret = register_netdev(dev); if (ret) { pr_err("register_netdev %s failed %d\n", dev->name, ret); - free_page((unsigned long)priv->epp_queue); + __free_pages(priv->eq_pages, EQ_ORDER); free_netdev(dev); return NULL; } @@ -2310,7 +2374,7 @@ static struct net_device *tile_net_dev_init(const char *name) ret = tile_net_get_mac(dev); if (ret < 0) { unregister_netdev(dev); - free_page((unsigned long)priv->epp_queue); + __free_pages(priv->eq_pages, EQ_ORDER); free_netdev(dev); return NULL; } @@ -2321,6 +2385,9 @@ static struct net_device *tile_net_dev_init(const char *name) /* * Module cleanup. + * + * FIXME: If compiled as a module, this module cannot be "unloaded", + * because the "ingress interrupt handler" is registered permanently. */ static void tile_net_cleanup(void) { @@ -2331,8 +2398,8 @@ static void tile_net_cleanup(void) struct net_device *dev = tile_net_devs[i]; struct tile_net_priv *priv = netdev_priv(dev); unregister_netdev(dev); - finv_buffer(priv->epp_queue, PAGE_SIZE); - free_page((unsigned long)priv->epp_queue); + finv_buffer(priv->eq, EQ_SIZE); + __free_pages(priv->eq_pages, EQ_ORDER); free_netdev(dev); } } @@ -2355,7 +2422,12 @@ static int tile_net_init_module(void) } +module_init(tile_net_init_module); +module_exit(tile_net_cleanup); + + #ifndef MODULE + /* * The "network_cpus" boot argument specifies the cpus that are dedicated * to handle ingress packets. @@ -2391,8 +2463,5 @@ static int __init network_cpus_setup(char *str) return 0; } __setup("network_cpus=", network_cpus_setup); -#endif - -module_init(tile_net_init_module); -module_exit(tile_net_cleanup); +#endif |