diff options
| author | Preetham Chandru <pchandru@nvidia.com> | 2012-07-10 18:42:16 +0530 |
|---|---|---|
| committer | Matthew Pedro <mapedro@nvidia.com> | 2012-08-20 11:50:04 -0700 |
| commit | 336961dd3cf9c39456dd9657e8f205718740c797 (patch) | |
| tree | ba1bece0b9eb39e200b3a4a1dcc55ff5d721ce96 | |
| parent | 4a01065c582513cafa31f7da1acdeca3a6561771 (diff) | |
usb: gadget: tegra_udc: Enable DR IRQ in udc_starttegra-l4t-r16-rc
Currently dr_controller_run() is called only during otg state
change.
When we unload a gadget driver, for example g_mass_storage
gadget driver, dr_controller_stop() is called but when it is
loaded back dr_controller_run() won't get called becasue of the
if condition failure. i.e
if (!udc->transceiver) {
dr_controller_run(udc);
}
So when the gadget driver is loaded for the second time
without removing the cable (i.e without otg state change),
the device won't get enumerated on the host because DR
IRQs are not enabled.
This CL fixes the above issue.
Bug 1012787
Signed-off-by: Preetham Chandru <pchandru@nvidia.com>
Change-Id: Ia127630e24dbe4c1e418163c2b858efb3baa8e45
Reviewed-on: http://git-master/r/114592
(cherry picked from commit be3e9def273181d1b44c1891de8602faebd719a8)
Reviewed-on: http://git-master/r/124283
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
| -rw-r--r-- | drivers/usb/gadget/tegra_udc.c | 12 |
1 files changed, 5 insertions, 7 deletions
diff --git a/drivers/usb/gadget/tegra_udc.c b/drivers/usb/gadget/tegra_udc.c index 47e2e97984a4..aad99a6cd66e 100644 --- a/drivers/usb/gadget/tegra_udc.c +++ b/drivers/usb/gadget/tegra_udc.c @@ -2274,13 +2274,11 @@ static int tegra_udc_start(struct usb_gadget_driver *driver, /* Enable DR IRQ reg and Set usbcmd reg Run bit */ - if (!udc->transceiver) { - dr_controller_run(udc); - udc->usb_state = USB_STATE_ATTACHED; - udc->ep0_state = WAIT_FOR_SETUP; - udc->ep0_dir = 0; - udc->vbus_active = vbus_enabled(udc); - } + dr_controller_run(udc); + udc->usb_state = USB_STATE_ATTACHED; + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = 0; + udc->vbus_active = vbus_enabled(udc); printk(KERN_INFO "%s: bind to driver %s\n", udc->gadget.name, driver->driver.name); |