Merge tag 'tty-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here's the big tty/serial driver pull request for 3.14-rc1

  There are a number of n_tty fixes and cleanups, and some serial driver
  bugfixes, and we got rid of one obsolete driver, making this series
  remove more lines than added, always a nice surprise.

  All of these have been in linux-next with no reports of issues"

* tag 'tty-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits)
  tty/serial: at91: disable uart timer at start of shutdown
  serial: 8250: enable UART_BUG_NOMSR for Tegra
  tty/serial: at91: reset rx_ring when port is shutdown
  tty/serial: at91: fix race condition in atmel_serial_remove
  tty/serial: at91: Handle shutdown more safely
  serial: sirf: correct condition for fetching dma buffer into tty
  serial: sirf: provide pm entries of uart_ops
  serial: sirf: use PM macro initialize PM functions
  serial: clps711x: Enable driver compilation with COMPILE_TEST
  serial: clps711x: Add support for N_IRDA line discipline
  tty: synclink: avoid sleep_on race
  tty/amiserial: avoid interruptible_sleep_on
  tty: delete non-required instances of include <linux/init.h>
  tty: an overflow of multiplication in drivers/tty/cyclades.c
  serial: Remove old SC26XX driver
  serial: add support for 200 v3 series Titan card
  serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chip
  tty: Removing the deprecated function tty_vhangup_locked()
  TTY/n_gsm: Removing the wrong tty_unlock/lock() in gsm_dlci_release()
  tty/serial: at91: document clock properties
  ...

52 files changed, 752 insertions, 1368 deletions

diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt
index 2191dcb9f1da..9c5d19ac935c 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt
@@ -6,6 +6,9 @@ Required properties:
   additional mode or an USART new feature.
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt
+- clock-names: tuple listing input clock names.
+	Required elements: "usart"
+- clocks: phandles to input clocks.
 
 Optional properties:
 - atmel,use-dma-rx: use of PDC or DMA for receiving data
@@ -26,6 +29,8 @@ Example:
 		compatible = "atmel,at91sam9260-usart";
 		reg = <0xfff8c000 0x4000>;
 		interrupts = <7>;
+		clocks = <&usart0_clk>;
+		clock-names = "usart";
 		atmel,use-dma-rx;
 		atmel,use-dma-tx;
 	};
@@ -35,6 +40,8 @@ Example:
 		compatible = "atmel,at91sam9260-usart";
 		reg = <0xf001c000 0x100>;
 		interrupts = <12 4 5>;
+		clocks = <&usart0_clk>;
+		clock-names = "usart";
 		atmel,use-dma-rx;
 		atmel,use-dma-tx;
 		dmas = <&dma0 2 0x3>,
diff --git a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
new file mode 100644
index 000000000000..12f3cf834deb
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
@@ -0,0 +1,28 @@
+* Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART)
+
+Required properties:
+- compatible: Should be "cirrus,clps711x-uart".
+- reg: Address and length of the register set for the device.
+- interrupts: Should contain UART TX and RX interrupt.
+- clocks: Should contain UART core clock number.
+- syscon: Phandle to SYSCON node, which contain UART control bits.
+
+Optional properties:
+- uart-use-ms: Indicate the UART has modem signal (DCD, DSR, CTS).
+
+Note: Each UART port should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+	aliases {
+		serial0 = &uart1;
+	};
+
+	uart1: uart@80000480 {
+		compatible = "cirrus,clps711x-uart";
+		reg = <0x80000480 0x80>;
+		interrupts = <12 13>;
+		clocks = <&clks 11>;
+		syscon = <&syscon1>;
+		uart-use-ms;
+	};
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
index fb77d1448fec..2001488a5ef2 100644
--- a/arch/arm/mach-clps711x/devices.c
+++ b/arch/arm/mach-clps711x/devices.c
@@ -61,8 +61,29 @@ static void __init clps711x_add_syscon(void)
 						&clps711x_syscon_res[i], 1);
 }
 
+static const struct resource clps711x_uart1_res[] __initconst = {
+	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + UARTDR1, SZ_128),
+	DEFINE_RES_IRQ(IRQ_UTXINT1),
+	DEFINE_RES_IRQ(IRQ_URXINT1),
+};
+
+static const struct resource clps711x_uart2_res[] __initconst = {
+	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + UARTDR2, SZ_128),
+	DEFINE_RES_IRQ(IRQ_UTXINT2),
+	DEFINE_RES_IRQ(IRQ_URXINT2),
+};
+
+static void __init clps711x_add_uart(void)
+{
+	platform_device_register_simple("clps711x-uart", 0, clps711x_uart1_res,
+					ARRAY_SIZE(clps711x_uart1_res));
+	platform_device_register_simple("clps711x-uart", 1, clps711x_uart2_res,
+					ARRAY_SIZE(clps711x_uart2_res));
+};
+
 void __init clps711x_devices_init(void)
 {
 	clps711x_add_gpio();
 	clps711x_add_syscon();
+	clps711x_add_uart();
 }
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index d39cca659a3f..8320abd1ef14 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2511,8 +2511,8 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp)
 
 	/* If port is closing, signal caller to try again */
 	if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING){
-		if (port->flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&port->close_wait);
+		wait_event_interruptible_tty(tty, port->close_wait,
+					     !(port->flags & ASYNC_CLOSING));
 		retval = ((port->flags & ASYNC_HUP_NOTIFY) ?
 			-EAGAIN : -ERESTARTSYS);
 		goto cleanup;
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index 8755f5f3ad37..0cb7ef59071b 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -124,7 +124,7 @@ static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *c
 {
 	struct serport *serport = (struct serport*) tty->disc_data;
 	unsigned long flags;
-	unsigned int ch_flags;
+	unsigned int ch_flags = 0;
 	int i;
 
 	spin_lock_irqsave(&serport->lock, flags);
@@ -133,18 +133,20 @@ static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *c
 		goto out;
 
 	for (i = 0; i < count; i++) {
-		switch (fp[i]) {
-		case TTY_FRAME:
-			ch_flags = SERIO_FRAME;
-			break;
-
-		case TTY_PARITY:
-			ch_flags = SERIO_PARITY;
-			break;
-
-		default:
-			ch_flags = 0;
-			break;
+		if (fp) {
+			switch (fp[i]) {
+			case TTY_FRAME:
+				ch_flags = SERIO_FRAME;
+				break;
+
+			case TTY_PARITY:
+				ch_flags = SERIO_PARITY;
+				break;
+
+			default:
+				ch_flags = 0;
+				break;
+			}
 		}
 
 		serio_interrupt(serport->serio, cp[i], ch_flags);
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index 1b8bdb7e9bf4..ff53314100f6 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -596,13 +596,11 @@ static int parport_serial_pci_probe(struct pci_dev *dev,
 
 	err = pci_enable_device (dev);
 	if (err) {
-		pci_set_drvdata (dev, NULL);
 		kfree (priv);
 		return err;
 	}
 
 	if (parport_register (dev, id)) {
-		pci_set_drvdata (dev, NULL);
 		kfree (priv);
 		return -ENODEV;
 	}
@@ -611,7 +609,6 @@ static int parport_serial_pci_probe(struct pci_dev *dev,
 		int i;
 		for (i = 0; i < priv->num_par; i++)
 			parport_pc_unregister_port (priv->port[i]);
-		pci_set_drvdata (dev, NULL);
 		kfree (priv);
 		return -ENODEV;
 	}
@@ -624,8 +621,6 @@ static void parport_serial_pci_remove(struct pci_dev *dev)
 	struct parport_serial_private *priv = pci_get_drvdata (dev);
 	int i;
 
-	pci_set_drvdata(dev, NULL);
-
 	// Serial ports
 	if (priv->serial)
 		pciserial_remove_ports(priv->serial);
diff --git a/drivers/staging/fwserial/Kconfig b/drivers/staging/fwserial/Kconfig
index a0812d99136f..9c7c9267d52c 100644
--- a/drivers/staging/fwserial/Kconfig
+++ b/drivers/staging/fwserial/Kconfig
@@ -9,3 +9,23 @@ config FIREWIRE_SERIAL
 
 	  To compile this driver as a module, say M here:  the module will
 	  be called firewire-serial.
+
+if FIREWIRE_SERIAL
+
+config FWTTY_MAX_TOTAL_PORTS
+       int "Maximum number of serial ports supported"
+       default "64"
+       help
+          Set this to the maximum number of serial ports you want the
+	  firewire-serial driver to support.
+
+config FWTTY_MAX_CARD_PORTS
+       int "Maximum number of serial ports supported per adapter"
+       range 0 FWTTY_MAX_TOTAL_PORTS
+       default "32"
+       help
+          Set this to the maximum number of serial ports each firewire
+	  adapter supports. The actual number of serial ports registered
+	  is set with the module parameter "ttys".
+
+endif
diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index 62df009e5ac7..8af136e9c9dc 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -136,14 +136,14 @@ static struct fwtty_peer *__fwserial_peer_by_node_id(struct fw_card *card,
 
 #ifdef FWTTY_PROFILING
 
-static void profile_fifo_avail(struct fwtty_port *port, unsigned *stat)
+static void fwtty_profile_fifo(struct fwtty_port *port, unsigned *stat)
 {
 	spin_lock_bh(&port->lock);
-	profile_size_distrib(stat, dma_fifo_avail(&port->tx_fifo));
+	fwtty_profile_data(stat, dma_fifo_avail(&port->tx_fifo));
 	spin_unlock_bh(&port->lock);
 }
 
-static void dump_profile(struct seq_file *m, struct stats *stats)
+static void fwtty_dump_profile(struct seq_file *m, struct stats *stats)
 {
 	/* for each stat, print sum of 0 to 2^k, then individually */
 	int k = 4;
@@ -183,8 +183,8 @@ static void dump_profile(struct seq_file *m, struct stats *stats)
 }
 
 #else
-#define profile_fifo_avail(port, stat)
-#define dump_profile(m, stats)
+#define fwtty_profile_fifo(port, stat)
+#define fwtty_dump_profile(m, stats)
 #endif
 
 /*
@@ -456,16 +456,27 @@ static int fwtty_write_port_status(struct fwtty_port *port)
 	return err;
 }
 
-static void __fwtty_throttle(struct fwtty_port *port, struct tty_struct *tty)
+static void fwtty_throttle_port(struct fwtty_port *port)
 {
+	struct tty_struct *tty;
 	unsigned old;
 
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+
+	spin_lock_bh(&port->lock);
+
 	old = port->mctrl;
 	port->mctrl |= OOB_RX_THROTTLE;
 	if (C_CRTSCTS(tty))
 		port->mctrl &= ~TIOCM_RTS;
 	if (~old & OOB_RX_THROTTLE)
 		__fwtty_write_port_status(port);
+
+	spin_unlock_bh(&port->lock);
+
+	tty_kref_put(tty);
 }
 
 /**
@@ -532,80 +543,14 @@ static void fwtty_emit_breaks(struct work_struct *work)
 	port->icount.brk += brk;
 }
 
-static void fwtty_pushrx(struct work_struct *work)
-{
-	struct fwtty_port *port = to_port(work, push);
-	struct tty_struct *tty;
-	struct buffered_rx *buf, *next;
-	int n, c = 0;
-
-	spin_lock_bh(&port->lock);
-	list_for_each_entry_safe(buf, next, &port->buf_list, list) {
-		n = tty_insert_flip_string_fixed_flag(&port->port, buf->data,
-						      TTY_NORMAL, buf->n);
-		c += n;
-		port->buffered -= n;
-		if (n < buf->n) {
-			if (n > 0) {
-				memmove(buf->data, buf->data + n, buf->n - n);
-				buf->n -= n;
-			}
-			tty = tty_port_tty_get(&port->port);
-			if (tty) {
-				__fwtty_throttle(port, tty);
-				tty_kref_put(tty);
-			}
-			break;
-		} else {
-			list_del(&buf->list);
-			kfree(buf);
-		}
-	}
-	if (c > 0)
-		tty_flip_buffer_push(&port->port);
-
-	if (list_empty(&port->buf_list))
-		clear_bit(BUFFERING_RX, &port->flags);
-	spin_unlock_bh(&port->lock);
-}
-
-static int fwtty_buffer_rx(struct fwtty_port *port, unsigned char *d, size_t n)
-{
-	struct buffered_rx *buf;
-	size_t size = (n + sizeof(struct buffered_rx) + 0xFF) & ~0xFF;
-
-	if (port->buffered + n > HIGH_WATERMARK) {
-		fwtty_err_ratelimited(port, "overflowed rx buffer: buffered: %d new: %zu wtrmk: %d\n",
-				      port->buffered, n, HIGH_WATERMARK);
-		return 0;
-	}
-	buf = kmalloc(size, GFP_ATOMIC);
-	if (!buf)
-		return 0;
-	INIT_LIST_HEAD(&buf->list);
-	buf->n = n;
-	memcpy(buf->data, d, n);
-
-	spin_lock_bh(&port->lock);
-	list_add_tail(&buf->list, &port->buf_list);
-	port->buffered += n;
-	if (port->buffered > port->stats.watermark)
-		port->stats.watermark = port->buffered;
-	set_bit(BUFFERING_RX, &port->flags);
-	spin_unlock_bh(&port->lock);
-
-	return n;
-}
-
 static int fwtty_rx(struct fwtty_port *port, unsigned char *data, size_t len)
 {
-	struct tty_struct *tty;
 	int c, n = len;
 	unsigned lsr;
 	int err = 0;
 
 	fwtty_dbg(port, "%d\n", n);
-	profile_size_distrib(port->stats.reads, n);
+	fwtty_profile_data(port->stats.reads, n);
 
 	if (port->write_only) {
 		n = 0;
@@ -636,31 +581,24 @@ static int fwtty_rx(struct fwtty_port *port, unsigned char *data, size_t len)
 		goto out;
 	}
 
-	if (!test_bit(BUFFERING_RX, &port->flags)) {
-		c = tty_insert_flip_string_fixed_flag(&port->port, data,
-				TTY_NORMAL, n);
-		if (c > 0)
-			tty_flip_buffer_push(&port->port);
-		n -= c;
-
-		if (n) {
-			/* start buffering and throttling */
-			n -= fwtty_buffer_rx(port, &data[c], n);
-
-			tty = tty_port_tty_get(&port->port);
-			if (tty) {
-				spin_lock_bh(&port->lock);
-				__fwtty_throttle(port, tty);
-				spin_unlock_bh(&port->lock);
-				tty_kref_put(tty);
-			}
-		}
-	} else
-		n -= fwtty_buffer_rx(port, data, n);
+	c = tty_insert_flip_string_fixed_flag(&port->port, data, TTY_NORMAL, n);
+	if (c > 0)
+		tty_flip_buffer_push(&port->port);
+	n -= c;
 
 	if (n) {
 		port->overrun = true;
 		err = -EIO;
+		fwtty_err_ratelimited(port, "flip buffer overrun\n");
+
+	} else {
+		/* throttle the sender if remaining flip buffer space has
+		 * reached high watermark to avoid losing data which may be
+		 * in-flight. Since the AR request context is 32k, that much
+		 * data may have _already_ been acked.
+		 */
+		if (tty_buffer_space_avail(&port->port) < HIGH_WATERMARK)
+			fwtty_throttle_port(port);
 	}
 
 out:
@@ -821,7 +759,7 @@ static int fwtty_tx(struct fwtty_port *port, bool drain)
 			if (n == -EAGAIN)
 				++port->stats.tx_stall;
 			else if (n == -ENODATA)
-				profile_size_distrib(port->stats.txns, 0);
+				fwtty_profile_data(port->stats.txns, 0);
 			else {
 				++port->stats.fifo_errs;
 				fwtty_err_ratelimited(port, "fifo err: %d\n",
@@ -830,7 +768,7 @@ static int fwtty_tx(struct fwtty_port *port, bool drain)
 			break;
 		}
 
-		profile_size_distrib(port->stats.txns, txn->dma_pended.len);
+		fwtty_profile_data(port->stats.txns, txn->dma_pended.len);
 
 		fwtty_send_txn_async(peer, txn, TCODE_WRITE_BLOCK_REQUEST,
 				     peer->fifo_addr, txn->dma_pended.data,
@@ -1101,20 +1039,13 @@ static int fwtty_port_activate(struct tty_port *tty_port,
 static void fwtty_port_shutdown(struct tty_port *tty_port)
 {
 	struct fwtty_port *port = to_port(tty_port, port);
-	struct buffered_rx *buf, *next;
 
 	/* TODO: cancel outstanding transactions */
 
 	cancel_delayed_work_sync(&port->emit_breaks);
 	cancel_delayed_work_sync(&port->drain);
-	cancel_work_sync(&port->push);
 
 	spin_lock_bh(&port->lock);
-	list_for_each_entry_safe(buf, next, &port->buf_list, list) {
-		list_del(&buf->list);
-		kfree(buf);
-	}
-	port->buffered = 0;
 	port->flags = 0;
 	port->break_ctl = 0;
 	port->overrun = 0;
@@ -1184,7 +1115,7 @@ static int fwtty_write(struct tty_struct *tty, const unsigned char *buf, int c)
 	int n, len;
 
 	fwtty_dbg(port, "%d\n", c);
-	profile_size_distrib(port->stats.writes, c);
+	fwtty_profile_data(port->stats.writes, c);
 
 	spin_lock_bh(&port->lock);
 	n = dma_fifo_in(&port->tx_fifo, buf, c);
@@ -1262,9 +1193,7 @@ static void fwtty_unthrottle(struct tty_struct *tty)
 
 	fwtty_dbg(port, "CRTSCTS: %d\n", (C_CRTSCTS(tty) != 0));
 
-	profile_fifo_avail(port, port->stats.unthrottle);
-
-	schedule_work(&port->push);
+	fwtty_profile_fifo(port, port->stats.unthrottle);
 
 	spin_lock_bh(&port->lock);
 	port->mctrl &= ~OOB_RX_THROTTLE;
@@ -1523,15 +1452,14 @@ static void fwtty_debugfs_show_port(struct seq_file *m, struct fwtty_port *port)
 
 	seq_printf(m, " dr:%d st:%d err:%d lost:%d", stats.dropped,
 		   stats.tx_stall, stats.fifo_errs, stats.lost);
-	seq_printf(m, " pkts:%d thr:%d wtrmk:%d", stats.sent, stats.throttled,
-		   stats.watermark);
+	seq_printf(m, " pkts:%d thr:%d", stats.sent, stats.throttled);
 
 	if (port->port.console) {
 		seq_puts(m, "\n    ");
 		(*port->fwcon_ops->proc_show)(m, port->con_data);
 	}
 
-	dump_profile(m, &port->stats);
+	fwtty_dump_profile(m, &port->stats);
 }
 
 static void fwtty_debugfs_show_peer(struct seq_file *m, struct fwtty_peer *peer)
@@ -2297,13 +2225,12 @@ static int fwserial_create(struct fw_unit *unit)
 		port->index = FWTTY_INVALID_INDEX;
 		port->port.ops = &fwtty_port_ops;
 		port->serial = serial;
+		tty_buffer_set_limit(&port->port, 128 * 1024);
 
 		spin_lock_init(&port->lock);
 		INIT_DELAYED_WORK(&port->drain, fwtty_drain_tx);
 		INIT_DELAYED_WORK(&port->emit_breaks, fwtty_emit_breaks);
 		INIT_WORK(&port->hangup, fwtty_do_hangup);
-		INIT_WORK(&port->push, fwtty_pushrx);
-		INIT_LIST_HEAD(&port->buf_list);
 		init_waitqueue_head(&port->wait_tx);
 		port->max_payload = link_speed_to_max_payload(SCODE_100);
 		dma_fifo_init(&port->tx_fifo);
diff --git a/drivers/staging/fwserial/fwserial.h b/drivers/staging/fwserial/fwserial.h
index 24635014a2ac..54f7f9b9b212 100644
--- a/drivers/staging/fwserial/fwserial.h
+++ b/drivers/staging/fwserial/fwserial.h
@@ -22,14 +22,14 @@
 #ifdef FWTTY_PROFILING
 #define DISTRIBUTION_MAX_SIZE     8192
 #define DISTRIBUTION_MAX_INDEX    (ilog2(DISTRIBUTION_MAX_SIZE) + 1)
-static inline void profile_size_distrib(unsigned stat[], unsigned val)
+static inline void fwtty_profile_data(unsigned stat[], unsigned val)
 {
 	int n = (val) ? min(ilog2(val) + 1, DISTRIBUTION_MAX_INDEX) : 0;
 	++stat[n];
 }
 #else
 #define DISTRIBUTION_MAX_INDEX    0
-#define profile_size_distrib(st, n)
+#define fwtty_profile_data(st, n)
 #endif
 
 /* Parameters for both VIRT_CABLE_PLUG & VIRT_CABLE_PLUG_RSP mgmt codes */
@@ -166,7 +166,6 @@ struct stats {
 	unsigned	sent;
 	unsigned	lost;
 	unsigned	throttled;
-	unsigned	watermark;
 	unsigned	reads[DISTRIBUTION_MAX_INDEX + 1];
 	unsigned	writes[DISTRIBUTION_MAX_INDEX + 1];
 	unsigned	txns[DISTRIBUTION_MAX_INDEX + 1];
@@ -183,12 +182,6 @@ struct fwconsole_ops {
 #define FWCON_NOTIFY_ATTACH		1
 #define FWCON_NOTIFY_DETACH		2
 
-struct buffered_rx {
-	struct list_head	list;
-	size_t			n;
-	unsigned char		data[0];
-};
-
 /**
  * fwtty_port: structure used to track/represent underlying tty_port
  * @port: underlying tty_port
@@ -223,11 +216,6 @@ struct buffered_rx {
  *         The work can race with the writer but concurrent sending is
  *         prevented with the IN_TX flag. Scheduled under lock to
  *         limit scheduling when fifo has just been drained.
- * @push: work responsible for pushing buffered rx to the ldisc.
- *	  rx can become buffered if the tty buffer is filled before the
- *	  ldisc throttles the sender.
- * @buf_list: list of buffered rx yet to be sent to ldisc
- * @buffered: byte count of buffered rx
  * @tx_fifo: fifo used to store & block-up writes for dma to remote
  * @max_payload: max bytes transmissable per dma (based on peer's max_payload)
  * @status_mask: UART_LSR_* bitmask significant to rx (based on termios)
@@ -267,9 +255,6 @@ struct fwtty_port {
 	spinlock_t		   lock;
 	unsigned		   mctrl;
 	struct delayed_work	   drain;
-	struct work_struct	   push;
-	struct list_head	   buf_list;
-	int			   buffered;
 	struct dma_fifo		   tx_fifo;
 	int			   max_payload;
 	unsigned		   status_mask;
@@ -291,7 +276,6 @@ struct fwtty_port {
 /* bit #s for flags field */
 #define IN_TX                      0
 #define STOP_TX                    1
-#define BUFFERING_RX		   2
 
 /* bitmasks for special mctrl/mstatus bits */
 #define OOB_RX_THROTTLE   0x00010000
@@ -307,8 +291,8 @@ struct fwtty_port {
 #define FREQ_BREAKS        (HZ / 50)
 
 /* Ports are allocated in blocks of num_ports for each fw_card */
-#define MAX_CARD_PORTS           32	/* max # of ports per card */
-#define MAX_TOTAL_PORTS          64	/* max # of ports total    */
+#define MAX_CARD_PORTS           CONFIG_FWTTY_MAX_CARD_PORTS
+#define MAX_TOTAL_PORTS          CONFIG_FWTTY_MAX_TOTAL_PORTS
 
 /* tuning parameters */
 #define FWTTY_PORT_TXFIFO_LEN	4096
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 71630a2af42c..979e7c3ea2cb 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1248,6 +1248,8 @@ static int rs_ioctl(struct tty_struct *tty,
 	struct async_icount cprev, cnow;	/* kernel counter temps */
 	void __user *argp = (void __user *)arg;
 	unsigned long flags;
+	DEFINE_WAIT(wait);
+	int ret;
 
 	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
 		return -ENODEV;
@@ -1288,25 +1290,33 @@ static int rs_ioctl(struct tty_struct *tty,
 			cprev = info->icount;
 			local_irq_restore(flags);
 			while (1) {
-				interruptible_sleep_on(&info->tport.delta_msr_wait);
-				/* see if a signal did it */
-				if (signal_pending(current))
-					return -ERESTARTSYS;
+				prepare_to_wait(&info->tport.delta_msr_wait,
+						&wait, TASK_INTERRUPTIBLE);
 				local_irq_save(flags);
 				cnow = info->icount; /* atomic copy */
 				local_irq_restore(flags);
 				if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && 
-				    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-					return -EIO; /* no change => error */
+				    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
+					ret = -EIO; /* no change => error */
+					break;
+				}
 				if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
 				     ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
 				     ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
 				     ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
-					return 0;
+					ret = 0;
+					break;
+				}
+				schedule();
+				/* see if a signal did it */
+				if (signal_pending(current)) {
+					ret = -ERESTARTSYS;
+					break;
 				}
 				cprev = cnow;
 			}
-			/* NOTREACHED */
+			finish_wait(&info->tport.delta_msr_wait, &wait);
+			return ret;
 
 		case TIOCSERGWILD:
 		case TIOCSERSWILD:
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index 33f83fee9fae..a57bb5ab761c 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -2709,6 +2709,8 @@ cy_ioctl(struct tty_struct *tty,
 		break;
 #ifndef CONFIG_CYZ_INTR
 	case CYZSETPOLLCYCLE:
+		if (arg > LONG_MAX / HZ)
+			return -ENODEV;
 		cyz_polling_cycle = (arg * HZ) / 1000;
 		break;
 	case CYZGETPOLLCYCLE:
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index f17d2e4ee2ca..75dc9d25f326 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/console.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/tty.h>
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 9eba119bcdd3..50b46881b6ca 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -788,7 +788,7 @@ static int hvc_tiocmset(struct tty_struct *tty,
 }
 
 #ifdef CONFIG_CONSOLE_POLL
-int hvc_poll_init(struct tty_driver *driver, int line, char *options)
+static int hvc_poll_init(struct tty_driver *driver, int line, char *options)
 {
 	return 0;
 }
diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c
index 347050ea414a..7ae6c293e518 100644
--- a/drivers/tty/hvc/hvsi_lib.c
+++ b/drivers/tty/hvc/hvsi_lib.c
@@ -1,5 +1,4 @@
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/console.h>
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index 8fd72ff9436e..ebd5bff0f5c1 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -15,7 +15,6 @@
  *   Copyright (C) 2007 David Sterba
  */
 
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index c0f76da55304..f34461c5f14e 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -194,6 +194,7 @@ struct gsm_control {
 struct gsm_mux {
 	struct tty_struct *tty;		/* The tty our ldisc is bound to */
 	spinlock_t lock;
+	struct mutex mutex;
 	unsigned int num;
 	struct kref ref;
 
@@ -1704,11 +1705,8 @@ static void gsm_dlci_release(struct gsm_dlci *dlci)
 		gsm_destroy_network(dlci);
 		mutex_unlock(&dlci->mutex);
 
-		/* tty_vhangup needs the tty_lock, so unlock and
-		   relock after doing the hangup. */
-		tty_unlock(tty);
 		tty_vhangup(tty);
-		tty_lock(tty);
+
 		tty_port_tty_set(&dlci->port, NULL);
 		tty_kref_put(tty);
 	}
@@ -2019,7 +2017,7 @@ static void gsm_error(struct gsm_mux *gsm,
  *	and then shut down each device hanging up the channels as we go.
  */
 
-void gsm_cleanup_mux(struct gsm_mux *gsm)
+static void gsm_cleanup_mux(struct gsm_mux *gsm)
 {
 	int i;
 	struct gsm_dlci *dlci = gsm->dlci[0];
@@ -2054,15 +2052,16 @@ void gsm_cleanup_mux(struct gsm_mux *gsm)
 					dlci->state == DLCI_CLOSED);
 	}
 	/* Free up any link layer users */
+	mutex_lock(&gsm->mutex);
 	for (i = 0; i < NUM_DLCI; i++)
 		if (gsm->dlci[i])
 			gsm_dlci_release(gsm->dlci[i]);
+	mutex_unlock(&gsm->mutex);
 	/* Now wipe the queues */
 	list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list)
 		kfree(txq);
 	INIT_LIST_HEAD(&gsm->tx_list);
 }
-EXPORT_SYMBOL_GPL(gsm_cleanup_mux);
 
 /**
  *	gsm_activate_mux	-	generic GSM setup
@@ -2073,7 +2072,7 @@ EXPORT_SYMBOL_GPL(gsm_cleanup_mux);
  *	finally kick off connecting to DLCI 0 on the modem.
  */
 
-int gsm_activate_mux(struct gsm_mux *gsm)
+static int gsm_activate_mux(struct gsm_mux *gsm)
 {
 	struct gsm_dlci *dlci;
 	int i = 0;
@@ -2109,7 +2108,6 @@ int gsm_activate_mux(struct gsm_mux *gsm)
 	gsm->dead = 0;		/* Tty opens are now permissible */
 	return 0;
 }
-EXPORT_SYMBOL_GPL(gsm_activate_mux);
 
 /**
  *	gsm_free_mux		-	free up a mux
@@ -2117,13 +2115,12 @@ EXPORT_SYMBOL_GPL(gsm_activate_mux);
  *
  *	Dispose of allocated resources for a dead mux
  */
-void gsm_free_mux(struct gsm_mux *gsm)
+static void gsm_free_mux(struct gsm_mux *gsm)
 {
 	kfree(gsm->txframe);
 	kfree(gsm->buf);
 	kfree(gsm);
 }
-EXPORT_SYMBOL_GPL(gsm_free_mux);
 
 /**
  *	gsm_free_muxr		-	free up a mux
@@ -2153,7 +2150,7 @@ static inline void mux_put(struct gsm_mux *gsm)
  *	Creates a new mux ready for activation.
  */
 
-struct gsm_mux *gsm_alloc_mux(void)
+static struct gsm_mux *gsm_alloc_mux(void)
 {
 	struct gsm_mux *gsm = kzalloc(sizeof(struct gsm_mux), GFP_KERNEL);
 	if (gsm == NULL)
@@ -2170,6 +2167,7 @@ struct gsm_mux *gsm_alloc_mux(void)
 		return NULL;
 	}
 	spin_lock_init(&gsm->lock);
+	mutex_init(&gsm->mutex);
 	kref_init(&gsm->ref);
 	INIT_LIST_HEAD(&gsm->tx_list);
 
@@ -2185,7 +2183,6 @@ struct gsm_mux *gsm_alloc_mux(void)
 
 	return gsm;
 }
-EXPORT_SYMBOL_GPL(gsm_alloc_mux);
 
 /**
  *	gsmld_output		-	write to link
@@ -2269,14 +2266,15 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 	char *f;
 	int i;
 	char buf[64];
-	char flags;
+	char flags = TTY_NORMAL;
 
 	if (debug & 4)
 		print_hex_dump_bytes("gsmld_receive: ", DUMP_PREFIX_OFFSET,
 				     cp, count);
 
 	for (i = count, dp = cp, f = fp; i; i--, dp++) {
-		flags = *f++;
+		if (f)
+			flags = *f++;
 		switch (flags) {
 		case TTY_NORMAL:
 			gsm->receive(gsm, *dp);
@@ -2711,7 +2709,7 @@ static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
 	return;
 }
 
-int gsm_change_mtu(struct net_device *net, int new_mtu)
+static int gsm_change_mtu(struct net_device *net, int new_mtu)
 {
 	struct gsm_mux_net *mux_net = (struct gsm_mux_net *)netdev_priv(net);
 	if ((new_mtu < 8) || (new_mtu > mux_net->dlci->gsm->mtu))
@@ -2909,23 +2907,33 @@ static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty)
 	This is ok from a locking
 	perspective as we don't have to worry about this
 	if DLCI0 is lost */
-	if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN)
+	mutex_lock(&gsm->mutex);
+	if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN) {
+		mutex_unlock(&gsm->mutex);
 		return -EL2NSYNC;
+	}
 	dlci = gsm->dlci[line];
 	if (dlci == NULL) {
 		alloc = true;
 		dlci = gsm_dlci_alloc(gsm, line);
 	}
-	if (dlci == NULL)
+	if (dlci == NULL) {
+		mutex_unlock(&gsm->mutex);
 		return -ENOMEM;
+	}
 	ret = tty_port_install(&dlci->port, driver, tty);
 	if (ret) {
 		if (alloc)
 			dlci_put(dlci);
+		mutex_unlock(&gsm->mutex);
 		return ret;
 	}
 
+	dlci_get(dlci);
+	dlci_get(gsm->dlci[0]);
+	mux_get(gsm);
 	tty->driver_data = dlci;
+	mutex_unlock(&gsm->mutex);
 
 	return 0;
 }
@@ -2936,9 +2944,6 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
 	struct tty_port *port = &dlci->port;
 
 	port->count++;
-	dlci_get(dlci);
-	dlci_get(dlci->gsm->dlci[0]);
-	mux_get(dlci->gsm);
 	tty_port_tty_set(port, tty);
 
 	dlci->modem_rx = 0;
@@ -2965,7 +2970,7 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp)
 	mutex_unlock(&dlci->mutex);
 	gsm = dlci->gsm;
 	if (tty_port_close_start(&dlci->port, tty, filp) == 0)
-		goto out;
+		return;
 	gsm_dlci_begin_close(dlci);
 	if (test_bit(ASYNCB_INITIALIZED, &dlci->port.flags)) {
 		if (C_HUPCL(tty))
@@ -2973,10 +2978,7 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp)
 	}
 	tty_port_close_end(&dlci->port, tty);
 	tty_port_tty_set(&dlci->port, NULL);
-out:
-	dlci_put(dlci);
-	dlci_put(gsm->dlci[0]);
-	mux_put(gsm);
+	return;
 }
 
 static void gsmtty_hangup(struct tty_struct *tty)
@@ -3153,6 +3155,16 @@ static int gsmtty_break_ctl(struct tty_struct *tty, int state)
 	return gsmtty_modem_update(dlci, encode);
 }
 
+static void gsmtty_remove(struct tty_driver *driver, struct tty_struct *tty)
+{
+	struct gsm_dlci *dlci = tty->driver_data;
+	struct gsm_mux *gsm = dlci->gsm;
+
+	dlci_put(dlci);
+	dlci_put(gsm->dlci[0]);
+	mux_put(gsm);
+	driver->ttys[tty->index] = NULL;
+}
 
 /* Virtual ttys for the demux */
 static const struct tty_operations gsmtty_ops = {
@@ -3172,6 +3184,7 @@ static const struct tty_operations gsmtty_ops = {
 	.tiocmget		= gsmtty_tiocmget,
 	.tiocmset		= gsmtty_tiocmset,
 	.break_ctl		= gsmtty_break_ctl,
+	.remove			= gsmtty_remove,
 };
 
 
diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c
index 1e6405070ce6..8b157d68a03e 100644
--- a/drivers/tty/n_r3964.c
+++ b/drivers/tty/n_r3964.c
@@ -1244,7 +1244,7 @@ static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 {
 	struct r3964_info *pInfo = tty->disc_data;
 	const unsigned char *p;
-	char *f, flags = 0;
+	char *f, flags = TTY_NORMAL;
 	int i;
 
 	for (i = count, p = cp, f = fp; i; i--, p++) {
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 34aacaaae14a..cb8017aa4434 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -105,6 +105,7 @@ struct n_tty_data {
 
 	/* must hold exclusive termios_rwsem to reset these */
 	unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
+	unsigned char push:1;
 
 	/* shared by producer and consumer */
 	char read_buf[N_TTY_BUF_SIZE];
@@ -275,7 +276,8 @@ static void n_tty_check_unthrottle(struct tty_struct *tty)
 			return;
 		n_tty_set_room(tty);
 		n_tty_write_wakeup(tty->link);
-		wake_up_interruptible_poll(&tty->link->write_wait, POLLOUT);
+		if (waitqueue_active(&tty->link->write_wait))
+			wake_up_interruptible_poll(&tty->link->write_wait, POLLOUT);
 		return;
 	}
 
@@ -342,6 +344,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
 
 	ldata->erasing = 0;
 	bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
+	ldata->push = 0;
 }
 
 static void n_tty_packet_mode_flush(struct tty_struct *tty)
@@ -351,7 +354,8 @@ static void n_tty_packet_mode_flush(struct tty_struct *tty)
 	spin_lock_irqsave(&tty->ctrl_lock, flags);
 	if (tty->link->packet) {
 		tty->ctrl_status |= TIOCPKT_FLUSHREAD;
-		wake_up_interruptible(&tty->link->read_wait);
+		if (waitqueue_active(&tty->link->read_wait))
+			wake_up_interruptible(&tty->link->read_wait);
 	}
 	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
 }
@@ -1162,7 +1166,8 @@ static void n_tty_receive_break(struct tty_struct *tty)
 		put_tty_queue('\0', ldata);
 	}
 	put_tty_queue('\0', ldata);
-	wake_up_interruptible(&tty->read_wait);
+	if (waitqueue_active(&tty->read_wait))
+		wake_up_interruptible(&tty->read_wait);
 }
 
 /**
@@ -1220,7 +1225,8 @@ static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c)
 		put_tty_queue('\0', ldata);
 	else
 		put_tty_queue(c, ldata);
-	wake_up_interruptible(&tty->read_wait);
+	if (waitqueue_active(&tty->read_wait))
+		wake_up_interruptible(&tty->read_wait);
 }
 
 static void
@@ -1264,7 +1270,6 @@ static int
 n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
 {
 	struct n_tty_data *ldata = tty->disc_data;
-	int parmrk;
 
 	if (I_IXON(tty)) {
 		if (c == START_CHAR(tty)) {
@@ -1349,8 +1354,6 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
 		}
 		if ((c == EOL_CHAR(tty)) ||
 		    (c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
-			parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty))
-				 ? 1 : 0;
 			/*
 			 * XXX are EOL_CHAR and EOL2_CHAR echoed?!?
 			 */
@@ -1365,7 +1368,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
 			 * XXX does PARMRK doubling happen for
 			 * EOL_CHAR and EOL2_CHAR?
 			 */
-			if (parmrk)
+			if (c == (unsigned char) '\377' && I_PARMRK(tty))
 				put_tty_queue(c, ldata);
 
 handle_newline:
@@ -1379,7 +1382,6 @@ handle_newline:
 		}
 	}
 
-	parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
 	if (L_ECHO(tty)) {
 		finish_erasing(ldata);
 		if (c == '\n')
@@ -1393,7 +1395,8 @@ handle_newline:
 		commit_echoes(tty);
 	}
 
-	if (parmrk)
+	/* PARMRK doubling check */
+	if (c == (unsigned char) '\377' && I_PARMRK(tty))
 		put_tty_queue(c, ldata);
 
 	put_tty_queue(c, ldata);
@@ -1404,7 +1407,6 @@ static inline void
 n_tty_receive_char_inline(struct tty_struct *tty, unsigned char c)
 {
 	struct n_tty_data *ldata = tty->disc_data;
-	int parmrk;
 
 	if (tty->stopped && !tty->flow_stopped && I_IXON(tty) && I_IXANY(tty)) {
 		start_tty(tty);
@@ -1418,13 +1420,13 @@ n_tty_receive_char_inline(struct tty_struct *tty, unsigned char c)
 		echo_char(c, tty);
 		commit_echoes(tty);
 	}
-	parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
-	if (parmrk)
+	/* PARMRK doubling check */
+	if (c == (unsigned char) '\377' && I_PARMRK(tty))
 		put_tty_queue(c, ldata);
 	put_tty_queue(c, ldata);
 }
 
-static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
+static void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 {
 	n_tty_receive_char_inline(tty, c);
 }
@@ -1449,8 +1451,7 @@ n_tty_receive_char_fast(struct tty_struct *tty, unsigned char c)
 	put_tty_queue(c, ldata);
 }
 
-static inline void
-n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
+static void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
 {
 	if (I_ISTRIP(tty))
 		c &= 0x7f;
@@ -1681,32 +1682,9 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
 	}
 }
 
-static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
-			      char *fp, int count)
-{
-	int room, n;
-
-	down_read(&tty->termios_rwsem);
-
-	while (1) {
-		room = receive_room(tty);
-		n = min(count, room);
-		if (!n)
-			break;
-		__receive_buf(tty, cp, fp, n);
-		cp += n;
-		if (fp)
-			fp += n;
-		count -= n;
-	}
-
-	tty->receive_room = room;
-	n_tty_check_throttle(tty);
-	up_read(&tty->termios_rwsem);
-}
-
-static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
-			      char *fp, int count)
+static int
+n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp,
+			 char *fp, int count, int flow)
 {
 	struct n_tty_data *ldata = tty->disc_data;
 	int room, n, rcvd = 0;
@@ -1717,7 +1695,7 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
 		room = receive_room(tty);
 		n = min(count, room);
 		if (!n) {
-			if (!room)
+			if (flow && !room)
 				ldata->no_room = 1;
 			break;
 		}
@@ -1736,6 +1714,18 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
 	return rcvd;
 }
 
+static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
+			      char *fp, int count)
+{
+	n_tty_receive_buf_common(tty, cp, fp, count, 0);
+}
+
+static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
+			      char *fp, int count)
+{
+	return n_tty_receive_buf_common(tty, cp, fp, count, 1);
+}
+
 int is_ignored(int sig)
 {
 	return (sigismember(&current->blocked, sig) ||
@@ -1762,7 +1752,16 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 
 	if (!old || (old->c_lflag ^ tty->termios.c_lflag) & ICANON) {
 		bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
-		ldata->line_start = ldata->canon_head = ldata->read_tail;
+		ldata->line_start = ldata->read_tail;
+		if (!L_ICANON(tty) || !read_cnt(ldata)) {
+			ldata->canon_head = ldata->read_tail;
+			ldata->push = 0;
+		} else {
+			set_bit((ldata->read_head - 1) & (N_TTY_BUF_SIZE - 1),
+				ldata->read_flags);
+			ldata->canon_head = ldata->read_head;
+			ldata->push = 1;
+		}
 		ldata->erasing = 0;
 		ldata->lnext = 0;
 	}
@@ -1825,8 +1824,10 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 		start_tty(tty);
 
 	/* The termios change make the tty ready for I/O */
-	wake_up_interruptible(&tty->write_wait);
-	wake_up_interruptible(&tty->read_wait);
+	if (waitqueue_active(&tty->write_wait))
+		wake_up_interruptible(&tty->write_wait);
+	if (waitqueue_active(&tty->read_wait))
+		wake_up_interruptible(&tty->read_wait);
 }
 
 /**
@@ -1892,14 +1893,15 @@ err:
 	return -ENOMEM;
 }
 
-static inline int input_available_p(struct tty_struct *tty, int amt)
+static inline int input_available_p(struct tty_struct *tty, int poll)
 {
 	struct n_tty_data *ldata = tty->disc_data;
+	int amt = poll && !TIME_CHAR(tty) ? MIN_CHAR(tty) : 1;
 
 	if (ldata->icanon && !L_EXTPROC(tty)) {
 		if (ldata->canon_head != ldata->read_tail)
 			return 1;
-	} else if (read_cnt(ldata) >= (amt ? amt : 1))
+	} else if (read_cnt(ldata) >= amt)
 		return 1;
 
 	return 0;
@@ -1965,6 +1967,12 @@ static int copy_from_read_buf(struct tty_struct *tty,
  *	it copies one line of input up to and including the line-delimiting
  *	character into the user-space buffer.
  *
+ *	NB: When termios is changed from non-canonical to canonical mode and
+ *	the read buffer contains data, n_tty_set_termios() simulates an EOF
+ *	push (as if C-d were input) _without_ the DISABLED_CHAR in the buffer.
+ *	This causes data already processed as input to be immediately available
+ *	as input although a newline has not been received.
+ *
  *	Called under the atomic_read_lock mutex
  *
  *	n_tty_read()/consumer path:
@@ -2011,7 +2019,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
 	n += found;
 	c = n;
 
-	if (found && read_buf(ldata, eol) == __DISABLED_CHAR) {
+	if (found && !ldata->push && read_buf(ldata, eol) == __DISABLED_CHAR) {
 		n--;
 		eof_push = !n && ldata->read_tail != ldata->line_start;
 	}
@@ -2038,7 +2046,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
 	ldata->read_tail += c;
 
 	if (found) {
-		ldata->line_start = ldata->read_tail;
+		if (!ldata->push)
+			ldata->line_start = ldata->read_tail;
+		else
+			ldata->push = 0;
 		tty_audit_push(tty);
 	}
 	return eof_push ? -EAGAIN : 0;
@@ -2398,7 +2409,7 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
 
 	poll_wait(file, &tty->read_wait, wait);
 	poll_wait(file, &tty->write_wait, wait);
-	if (input_available_p(tty, TIME_CHAR(tty) ? 0 : MIN_CHAR(tty)))
+	if (input_available_p(tty, 1))
 		mask |= POLLIN | POLLRDNORM;
 	if (tty->packet && tty->link->ctrl_status)
 		mask |= POLLPRI | POLLIN | POLLRDNORM;
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 354564ea47c5..383c4c796637 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -1744,7 +1744,7 @@ static void rp_flush_buffer(struct tty_struct *tty)
 
 #ifdef CONFIG_PCI
 
-static DEFINE_PCI_DEVICE_TABLE(rocket_pci_ids) = {
+static const struct pci_device_id rocket_pci_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP4QUAD) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_RP8OCTA) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_DEVICE_ID_URP8OCTA) },
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index e33d38cb170f..61ecd709a722 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2670,6 +2670,10 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	if (port->type == PORT_16550A && port->iotype == UPIO_AU)
 		up->bugs |= UART_BUG_NOMSR;
 
+	/* HW bugs may trigger IRQ while IIR == NO_INT */
+	if (port->type == PORT_TEGRA)
+		up->bugs |= UART_BUG_NOMSR;
+
 	if (port->type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
 		autoconfig_irq(up);
 
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 06525f10e364..faa64e646100 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -14,7 +14,6 @@
  * raised, the LCR needs to be rewritten and the uart status register read.
  */
 #include <linux/device.h>
-#include <linux/init.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/serial_8250.h>
@@ -274,7 +273,6 @@ static int dw8250_probe_of(struct uart_port *p,
 	return 0;
 }
 
-#ifdef CONFIG_ACPI
 static int dw8250_probe_acpi(struct uart_8250_port *up,
 			     struct dw8250_data *data)
 {
@@ -302,13 +300,6 @@ static int dw8250_probe_acpi(struct uart_8250_port *up,
 
 	return 0;
 }
-#else
-static inline int dw8250_probe_acpi(struct uart_8250_port *up,
-				    struct dw8250_data *data)
-{
-	return -ENODEV;
-}
-#endif /* CONFIG_ACPI */
 
 static int dw8250_probe(struct platform_device *pdev)
 {
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index d1a9078003bd..56c87232b6a0 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -18,7 +18,6 @@
  */
 
 #include <linux/device.h>
-#include <linux/init.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/serial_8250.h>
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 4697a514b80a..50228eed3b6f 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -11,7 +11,6 @@
  */
 #undef DEBUG
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
@@ -1259,10 +1258,10 @@ static int pci_quatech_init(struct pci_dev *dev)
 		unsigned long base = pci_resource_start(dev, 0);
 		if (base) {
 			u32 tmp;
-			outl(inl(base + 0x38), base + 0x38);
+			outl(inl(base + 0x38) | 0x00002000, base + 0x38);
 			tmp = inl(base + 0x3c);
 			outl(tmp | 0x01000000, base + 0x3c);
-			outl(tmp, base + 0x3c);
+			outl(tmp &= ~0x01000000, base + 0x3c);
 		}
 	}
 	return 0;
@@ -1744,6 +1743,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_TITAN_800E	0xA014
 #define PCI_DEVICE_ID_TITAN_200EI	0xA016
 #define PCI_DEVICE_ID_TITAN_200EISI	0xA017
+#define PCI_DEVICE_ID_TITAN_200V3	0xA306
 #define PCI_DEVICE_ID_TITAN_400V3	0xA310
 #define PCI_DEVICE_ID_TITAN_410V3	0xA312
 #define PCI_DEVICE_ID_TITAN_800V3	0xA314
@@ -4427,6 +4427,9 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_921600 },
 	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_4_921600 },
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 35d9ab95c5cb..682a2fbe5c06 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -12,7 +12,6 @@
  * the Free Software Foundation; either version 2 of the License.
  */
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/pnp.h>
 #include <linux/string.h>
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 1b74b88e1e1e..4d180c9423ef 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -34,7 +34,6 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/string.h>
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a3817ab8602f..441ada489874 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -181,9 +181,8 @@ config SERIAL_KS8695_CONSOLE
 
 config SERIAL_CLPS711X
 	tristate "CLPS711X serial port support"
-	depends on ARCH_CLPS711X
+	depends on ARCH_CLPS711X || COMPILE_TEST
 	select SERIAL_CORE
-	default y
 	help
 	  This enables the driver for the on-chip UARTs of the Cirrus
 	  Logic EP711x/EP721x/EP731x processors.
@@ -1146,31 +1145,13 @@ config SERIAL_QE
 	  This driver supports the QE serial ports on Freescale embedded
 	  PowerPC that contain a QUICC Engine.
 
-config SERIAL_SC26XX
-	tristate "SC2681/SC2692 serial port support"
-	depends on SNI_RM
-	select SERIAL_CORE
-	help
-	  This is a driver for the onboard serial ports of
-	  older RM400 machines.
-
-config SERIAL_SC26XX_CONSOLE
-	bool "Console on SC2681/SC2692 serial port"
-	depends on SERIAL_SC26XX=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Support for Console on SC2681/SC2692 serial ports.
-
 config SERIAL_SCCNXP
 	tristate "SCCNXP serial port support"
-	depends on !SERIAL_SC26XX
 	select SERIAL_CORE
-	default n
 	help
 	  This selects support for an advanced UART from NXP (Philips).
 	  Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92,
 	  SC28L202, SCC68681 and SCC68692.
-	  Positioned as a replacement for the driver SC26XX.
 
 config SERIAL_SCCNXP_CONSOLE
 	bool "Console on SCCNXP serial port"
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 3068c7722087..3680854fef41 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -47,7 +47,6 @@ obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o
 obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
 obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
 obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
-obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o
 obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
 obj-$(CONFIG_SERIAL_JSM) += jsm/
 obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 33bd8606be62..01c9e72433e1 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -756,9 +756,10 @@ static int pl010_remove(struct amba_device *dev)
 	return 0;
 }
 
-static int pl010_suspend(struct amba_device *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int pl010_suspend(struct device *dev)
 {
-	struct uart_amba_port *uap = amba_get_drvdata(dev);
+	struct uart_amba_port *uap = dev_get_drvdata(dev);
 
 	if (uap)
 		uart_suspend_port(&amba_reg, &uap->port);
@@ -766,15 +767,18 @@ static int pl010_suspend(struct amba_device *dev, pm_message_t state)
 	return 0;
 }
 
-static int pl010_resume(struct amba_device *dev)
+static int pl010_resume(struct device *dev)
 {
-	struct uart_amba_port *uap = amba_get_drvdata(dev);
+	struct uart_amba_port *uap = dev_get_drvdata(dev);
 
 	if (uap)
 		uart_resume_port(&amba_reg, &uap->port);
 
 	return 0;
 }
+#endif
+
+static SIMPLE_DEV_PM_OPS(pl010_dev_pm_ops, pl010_suspend, pl010_resume);
 
 static struct amba_id pl010_ids[] = {
 	{
@@ -789,12 +793,11 @@ MODULE_DEVICE_TABLE(amba, pl010_ids);
 static struct amba_driver pl010_driver = {
 	.drv = {
 		.name	= "uart-pl010",
+		.pm	= &pl010_dev_pm_ops,
 	},
 	.id_table	= pl010_ids,
 	.probe		= pl010_probe,
 	.remove		= pl010_remove,
-	.suspend	= pl010_suspend,
-	.resume		= pl010_resume,
 };
 
 static int __init pl010_init(void)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 7203864992a5..d58783d364e3 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -112,8 +112,6 @@ static struct vendor_data vendor_st = {
 	.get_fifosize		= get_fifosize_st,
 };
 
-static struct uart_amba_port *amba_ports[UART_NR];
-
 /* Deals with DMA transactions */
 
 struct pl011_sgbuf {
@@ -969,6 +967,8 @@ static void pl011_dma_rx_poll(unsigned long args)
 
 		spin_lock_irqsave(&uap->port.lock, flags);
 		pl011_dma_rx_stop(uap);
+		uap->im |= UART011_RXIM;
+		writew(uap->im, uap->port.membase + UART011_IMSC);
 		spin_unlock_irqrestore(&uap->port.lock, flags);
 
 		uap->dmarx.running = false;
@@ -1216,8 +1216,8 @@ __acquires(&uap->port.lock)
 			dev_dbg(uap->port.dev, "could not trigger RX DMA job "
 				"fall back to interrupt mode again\n");
 			uap->im |= UART011_RXIM;
+			writew(uap->im, uap->port.membase + UART011_IMSC);
 		} else {
-			uap->im &= ~UART011_RXIM;
 #ifdef CONFIG_DMA_ENGINE
 			/* Start Rx DMA poll */
 			if (uap->dmarx.poll_rate) {
@@ -1229,8 +1229,6 @@ __acquires(&uap->port.lock)
 			}
 #endif
 		}
-
-		writew(uap->im, uap->port.membase + UART011_IMSC);
 	}
 	spin_lock(&uap->port.lock);
 }
@@ -1513,10 +1511,25 @@ static int pl011_hwinit(struct uart_port *port)
 	return retval;
 }
 
+static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
+{
+	writew(lcr_h, uap->port.membase + uap->lcrh_rx);
+	if (uap->lcrh_rx != uap->lcrh_tx) {
+		int i;
+		/*
+		 * Wait 10 PCLKs before writing LCRH_TX register,
+		 * to get this delay write read only register 10 times
+		 */
+		for (i = 0; i < 10; ++i)
+			writew(0xff, uap->port.membase + UART011_MIS);
+		writew(lcr_h, uap->port.membase + uap->lcrh_tx);
+	}
+}
+
 static int pl011_startup(struct uart_port *port)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
-	unsigned int cr;
+	unsigned int cr, lcr_h, fbrd, ibrd;
 	int retval;
 
 	retval = pl011_hwinit(port);
@@ -1535,32 +1548,36 @@ static int pl011_startup(struct uart_port *port)
 	writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS);
 
 	/*
-	 * Provoke TX FIFO interrupt into asserting.
+	 * Provoke TX FIFO interrupt into asserting. Taking care to preserve
+	 * baud rate and data format specified by FBRD, IBRD and LCRH as the
+	 * UART may already be in use as a console.
 	 */
+	spin_lock_irq(&uap->port.lock);
+
+	fbrd = readw(uap->port.membase + UART011_FBRD);
+	ibrd = readw(uap->port.membase + UART011_IBRD);
+	lcr_h = readw(uap->port.membase + uap->lcrh_rx);
+
 	cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE;
 	writew(cr, uap->port.membase + UART011_CR);
 	writew(0, uap->port.membase + UART011_FBRD);
 	writew(1, uap->port.membase + UART011_IBRD);
-	writew(0, uap->port.membase + uap->lcrh_rx);
-	if (uap->lcrh_tx != uap->lcrh_rx) {
-		int i;
-		/*
-		 * Wait 10 PCLKs before writing LCRH_TX register,
-		 * to get this delay write read only register 10 times
-		 */
-		for (i = 0; i < 10; ++i)
-			writew(0xff, uap->port.membase + UART011_MIS);
-		writew(0, uap->port.membase + uap->lcrh_tx);
-	}
+	pl011_write_lcr_h(uap, 0);
 	writew(0, uap->port.membase + UART01x_DR);
 	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
 		barrier();
 
+	writew(fbrd, uap->port.membase + UART011_FBRD);
+	writew(ibrd, uap->port.membase + UART011_IBRD);
+	pl011_write_lcr_h(uap, lcr_h);
+
 	/* restore RTS and DTR */
 	cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
 	cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
 	writew(cr, uap->port.membase + UART011_CR);
 
+	spin_unlock_irq(&uap->port.lock);
+
 	/*
 	 * initialise the old status of the modem signals
 	 */
@@ -1629,11 +1646,13 @@ static void pl011_shutdown(struct uart_port *port)
 	 * it during startup().
 	 */
 	uap->autorts = false;
+	spin_lock_irq(&uap->port.lock);
 	cr = readw(uap->port.membase + UART011_CR);
 	uap->old_cr = cr;
 	cr &= UART011_CR_RTS | UART011_CR_DTR;
 	cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
 	writew(cr, uap->port.membase + UART011_CR);
+	spin_unlock_irq(&uap->port.lock);
 
 	/*
 	 * disable break condition and fifos
@@ -1797,17 +1816,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * UART011_FBRD & UART011_IBRD.
 	 * ----------^----------^----------^----------^-----
 	 */
-	writew(lcr_h, port->membase + uap->lcrh_rx);
-	if (uap->lcrh_rx != uap->lcrh_tx) {
-		int i;
-		/*
-		 * Wait 10 PCLKs before writing LCRH_TX register,
-		 * to get this delay write read only register 10 times
-		 */
-		for (i = 0; i < 10; ++i)
-			writew(0xff, uap->port.membase + UART011_MIS);
-		writew(lcr_h, port->membase + uap->lcrh_tx);
-	}
+	pl011_write_lcr_h(uap, lcr_h);
 	writew(old_cr, port->membase + UART011_CR);
 
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -2169,10 +2178,10 @@ static int pl011_remove(struct amba_device *dev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int pl011_suspend(struct amba_device *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int pl011_suspend(struct device *dev)
 {
-	struct uart_amba_port *uap = amba_get_drvdata(dev);
+	struct uart_amba_port *uap = dev_get_drvdata(dev);
 
 	if (!uap)
 		return -EINVAL;
@@ -2180,9 +2189,9 @@ static int pl011_suspend(struct amba_device *dev, pm_message_t state)
 	return uart_suspend_port(&amba_reg, &uap->port);
 }
 
-static int pl011_resume(struct amba_device *dev)
+static int pl011_resume(struct device *dev)
 {
-	struct uart_amba_port *uap = amba_get_drvdata(dev);
+	struct uart_amba_port *uap = dev_get_drvdata(dev);
 
 	if (!uap)
 		return -EINVAL;
@@ -2191,6 +2200,8 @@ static int pl011_resume(struct amba_device *dev)
 }
 #endif
 
+static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume);
+
 static struct amba_id pl011_ids[] = {
 	{
 		.id	= 0x00041011,
@@ -2210,14 +2221,11 @@ MODULE_DEVICE_TABLE(amba, pl011_ids);
 static struct amba_driver pl011_driver = {
 	.drv = {
 		.name	= "uart-pl011",
+		.pm	= &pl011_dev_pm_ops,
 	},
 	.id_table	= pl011_ids,
 	.probe		= pl011_probe,
 	.remove		= pl011_remove,
-#ifdef CONFIG_PM
-	.suspend	= pl011_suspend,
-	.resume		= pl011_resume,
-#endif
 };
 
 static int __init pl011_init(void)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index c7d99af46a96..a49f10d269b2 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -825,9 +825,6 @@ static void atmel_release_rx_dma(struct uart_port *port)
 	atmel_port->desc_rx = NULL;
 	atmel_port->chan_rx = NULL;
 	atmel_port->cookie_rx = -EINVAL;
-
-	if (!atmel_port->is_usart)
-		del_timer_sync(&atmel_port->uart_timer);
 }
 
 static void atmel_rx_from_dma(struct uart_port *port)
@@ -1229,9 +1226,6 @@ static void atmel_release_rx_pdc(struct uart_port *port)
 				 DMA_FROM_DEVICE);
 		kfree(pdc->buf);
 	}
-
-	if (!atmel_port->is_usart)
-		del_timer_sync(&atmel_port->uart_timer);
 }
 
 static void atmel_rx_from_pdc(struct uart_port *port)
@@ -1604,12 +1598,13 @@ static int atmel_startup(struct uart_port *port)
 	/* enable xmit & rcvr */
 	UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
 
+	setup_timer(&atmel_port->uart_timer,
+			atmel_uart_timer_callback,
+			(unsigned long)port);
+
 	if (atmel_use_pdc_rx(port)) {
 		/* set UART timeout */
 		if (!atmel_port->is_usart) {
-			setup_timer(&atmel_port->uart_timer,
-					atmel_uart_timer_callback,
-					(unsigned long)port);
 			mod_timer(&atmel_port->uart_timer,
 					jiffies + uart_poll_timeout(port));
 		/* set USART timeout */
@@ -1624,9 +1619,6 @@ static int atmel_startup(struct uart_port *port)
 	} else if (atmel_use_dma_rx(port)) {
 		/* set UART timeout */
 		if (!atmel_port->is_usart) {
-			setup_timer(&atmel_port->uart_timer,
-					atmel_uart_timer_callback,
-					(unsigned long)port);
 			mod_timer(&atmel_port->uart_timer,
 					jiffies + uart_poll_timeout(port));
 		/* set USART timeout */
@@ -1650,12 +1642,30 @@ static int atmel_startup(struct uart_port *port)
 static void atmel_shutdown(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
 	/*
-	 * Ensure everything is stopped.
+	 * Prevent any tasklets being scheduled during
+	 * cleanup
+	 */
+	del_timer_sync(&atmel_port->uart_timer);
+
+	/*
+	 * Clear out any scheduled tasklets before
+	 * we destroy the buffers
+	 */
+	tasklet_kill(&atmel_port->tasklet);
+
+	/*
+	 * Ensure everything is stopped and
+	 * disable all interrupts, port and break condition.
 	 */
 	atmel_stop_rx(port);
 	atmel_stop_tx(port);
 
+	UART_PUT_CR(port, ATMEL_US_RSTSTA);
+	UART_PUT_IDR(port, -1);
+
+
 	/*
 	 * Shut-down the DMA.
 	 */
@@ -1665,10 +1675,10 @@ static void atmel_shutdown(struct uart_port *port)
 		atmel_port->release_tx(port);
 
 	/*
-	 * Disable all interrupts, port and break condition.
+	 * Reset ring buffer pointers
 	 */
-	UART_PUT_CR(port, ATMEL_US_RSTSTA);
-	UART_PUT_IDR(port, -1);
+	atmel_port->rx_ring.head = 0;
+	atmel_port->rx_ring.tail = 0;
 
 	/*
 	 * Free the interrupt
@@ -2441,11 +2451,12 @@ static int atmel_serial_remove(struct platform_device *pdev)
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	int ret = 0;
 
+	tasklet_kill(&atmel_port->tasklet);
+
 	device_init_wakeup(&pdev->dev, 0);
 
 	ret = uart_remove_one_port(&atmel_uart, port);
 
-	tasklet_kill(&atmel_port->tasklet);
 	kfree(atmel_port->rx_ring.buf);
 
 	/* "port" is allocated statically, so we shouldn't free it */
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 8d0b994357c8..b0eacb83f831 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -21,44 +21,66 @@
 #include <linux/console.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
-#include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/ioport.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 
-#include <mach/hardware.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/clps711x.h>
 
-#define UART_CLPS711X_NAME	"uart-clps711x"
+#define UART_CLPS711X_DEVNAME	"ttyCL"
 #define UART_CLPS711X_NR	2
 #define UART_CLPS711X_MAJOR	204
 #define UART_CLPS711X_MINOR	40
 
-#define UBRLCR(port)		((port)->line ? UBRLCR2 : UBRLCR1)
-#define UARTDR(port)		((port)->line ? UARTDR2 : UARTDR1)
-#define SYSFLG(port)		((port)->line ? SYSFLG2 : SYSFLG1)
-#define SYSCON(port)		((port)->line ? SYSCON2 : SYSCON1)
-#define TX_IRQ(port)		((port)->line ? IRQ_UTXINT2 : IRQ_UTXINT1)
-#define RX_IRQ(port)		((port)->line ? IRQ_URXINT2 : IRQ_URXINT1)
+#define UARTDR_OFFSET		(0x00)
+#define UBRLCR_OFFSET		(0x40)
+
+#define UARTDR_FRMERR		(1 << 8)
+#define UARTDR_PARERR		(1 << 9)
+#define UARTDR_OVERR		(1 << 10)
+
+#define UBRLCR_BAUD_MASK	((1 << 12) - 1)
+#define UBRLCR_BREAK		(1 << 12)
+#define UBRLCR_PRTEN		(1 << 13)
+#define UBRLCR_EVENPRT		(1 << 14)
+#define UBRLCR_XSTOP		(1 << 15)
+#define UBRLCR_FIFOEN		(1 << 16)
+#define UBRLCR_WRDLEN5		(0 << 17)
+#define UBRLCR_WRDLEN6		(1 << 17)
+#define UBRLCR_WRDLEN7		(2 << 17)
+#define UBRLCR_WRDLEN8		(3 << 17)
+#define UBRLCR_WRDLEN_MASK	(3 << 17)
 
 struct clps711x_port {
-	struct uart_driver	uart;
-	struct clk		*uart_clk;
-	struct uart_port	port[UART_CLPS711X_NR];
-	int			tx_enabled[UART_CLPS711X_NR];
-#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
-	struct console		console;
-#endif
+	struct uart_port	port;
+	unsigned int		tx_enabled;
+	int			rx_irq;
+	struct regmap		*syscon;
+	bool			use_ms;
+};
+
+static struct uart_driver clps711x_uart = {
+	.owner		= THIS_MODULE,
+	.driver_name	= UART_CLPS711X_DEVNAME,
+	.dev_name	= UART_CLPS711X_DEVNAME,
+	.major		= UART_CLPS711X_MAJOR,
+	.minor		= UART_CLPS711X_MINOR,
+	.nr		= UART_CLPS711X_NR,
 };
 
 static void uart_clps711x_stop_tx(struct uart_port *port)
 {
 	struct clps711x_port *s = dev_get_drvdata(port->dev);
 
-	if (s->tx_enabled[port->line]) {
-		disable_irq(TX_IRQ(port));
-		s->tx_enabled[port->line] = 0;
+	if (s->tx_enabled) {
+		disable_irq(port->irq);
+		s->tx_enabled = 0;
 	}
 }
 
@@ -66,33 +88,27 @@ static void uart_clps711x_start_tx(struct uart_port *port)
 {
 	struct clps711x_port *s = dev_get_drvdata(port->dev);
 
-	if (!s->tx_enabled[port->line]) {
-		enable_irq(TX_IRQ(port));
-		s->tx_enabled[port->line] = 1;
+	if (!s->tx_enabled) {
+		s->tx_enabled = 1;
+		enable_irq(port->irq);
 	}
 }
 
-static void uart_clps711x_stop_rx(struct uart_port *port)
-{
-	disable_irq(RX_IRQ(port));
-}
-
-static void uart_clps711x_enable_ms(struct uart_port *port)
-{
-	/* Do nothing */
-}
-
 static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	unsigned int status, ch, flg;
+	struct clps711x_port *s = dev_get_drvdata(port->dev);
+	unsigned int status, flg;
+	u16 ch;
 
 	for (;;) {
-		status = clps_readl(SYSFLG(port));
-		if (status & SYSFLG_URXFE)
+		u32 sysflg = 0;
+
+		regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+		if (sysflg & SYSFLG_URXFE)
 			break;
 
-		ch = clps_readw(UARTDR(port));
+		ch = readw(port->membase + UARTDR_OFFSET);
 		status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR);
 		ch &= 0xff;
 
@@ -138,23 +154,29 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
 	struct circ_buf *xmit = &port->state->xmit;
 
 	if (port->x_char) {
-		clps_writew(port->x_char, UARTDR(port));
+		writew(port->x_char, port->membase + UARTDR_OFFSET);
 		port->icount.tx++;
 		port->x_char = 0;
 		return IRQ_HANDLED;
 	}
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-		disable_irq_nosync(TX_IRQ(port));
-		s->tx_enabled[port->line] = 0;
+		if (s->tx_enabled) {
+			disable_irq_nosync(port->irq);
+			s->tx_enabled = 0;
+		}
 		return IRQ_HANDLED;
 	}
 
 	while (!uart_circ_empty(xmit)) {
-		clps_writew(xmit->buf[xmit->tail], UARTDR(port));
+		u32 sysflg = 0;
+
+		writew(xmit->buf[xmit->tail], port->membase + UARTDR_OFFSET);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
-		if (clps_readl(SYSFLG(port) & SYSFLG_UTXFF))
+
+		regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+		if (sysflg & SYSFLG_UTXFF)
 			break;
 	}
 
@@ -166,20 +188,28 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
 
 static unsigned int uart_clps711x_tx_empty(struct uart_port *port)
 {
-	return (clps_readl(SYSFLG(port) & SYSFLG_UBUSY)) ? 0 : TIOCSER_TEMT;
+	struct clps711x_port *s = dev_get_drvdata(port->dev);
+	u32 sysflg = 0;
+
+	regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+
+	return (sysflg & SYSFLG_UBUSY) ? 0 : TIOCSER_TEMT;
 }
 
 static unsigned int uart_clps711x_get_mctrl(struct uart_port *port)
 {
-	unsigned int status, result = 0;
+	struct clps711x_port *s = dev_get_drvdata(port->dev);
+	unsigned int result = 0;
+
+	if (s->use_ms) {
+		u32 sysflg = 0;
 
-	if (port->line == 0) {
-		status = clps_readl(SYSFLG1);
-		if (status & SYSFLG1_DCD)
+		regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+		if (sysflg & SYSFLG1_DCD)
 			result |= TIOCM_CAR;
-		if (status & SYSFLG1_DSR)
+		if (sysflg & SYSFLG1_DSR)
 			result |= TIOCM_DSR;
-		if (status & SYSFLG1_CTS)
+		if (sysflg & SYSFLG1_CTS)
 			result |= TIOCM_CTS;
 	} else
 		result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
@@ -194,65 +224,53 @@ static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 static void uart_clps711x_break_ctl(struct uart_port *port, int break_state)
 {
-	unsigned long flags;
 	unsigned int ubrlcr;
 
-	spin_lock_irqsave(&port->lock, flags);
-
-	ubrlcr = clps_readl(UBRLCR(port));
+	ubrlcr = readl(port->membase + UBRLCR_OFFSET);
 	if (break_state)
 		ubrlcr |= UBRLCR_BREAK;
 	else
 		ubrlcr &= ~UBRLCR_BREAK;
-	clps_writel(ubrlcr, UBRLCR(port));
+	writel(ubrlcr, port->membase + UBRLCR_OFFSET);
+}
+
+static void uart_clps711x_set_ldisc(struct uart_port *port, int ld)
+{
+	if (!port->line) {
+		struct clps711x_port *s = dev_get_drvdata(port->dev);
 
-	spin_unlock_irqrestore(&port->lock, flags);
+		regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON1_SIREN,
+				   (ld == N_IRDA) ? SYSCON1_SIREN : 0);
+	}
 }
 
 static int uart_clps711x_startup(struct uart_port *port)
 {
 	struct clps711x_port *s = dev_get_drvdata(port->dev);
-	int ret;
-
-	s->tx_enabled[port->line] = 1;
-	/* Allocate the IRQs */
-	ret = devm_request_irq(port->dev, TX_IRQ(port), uart_clps711x_int_tx,
-			       0, UART_CLPS711X_NAME " TX", port);
-	if (ret)
-		return ret;
-
-	ret = devm_request_irq(port->dev, RX_IRQ(port), uart_clps711x_int_rx,
-			       0, UART_CLPS711X_NAME " RX", port);
-	if (ret) {
-		devm_free_irq(port->dev, TX_IRQ(port), port);
-		return ret;
-	}
 
 	/* Disable break */
-	clps_writel(clps_readl(UBRLCR(port)) & ~UBRLCR_BREAK, UBRLCR(port));
+	writel(readl(port->membase + UBRLCR_OFFSET) & ~UBRLCR_BREAK,
+	       port->membase + UBRLCR_OFFSET);
 
 	/* Enable the port */
-	clps_writel(clps_readl(SYSCON(port)) | SYSCON_UARTEN, SYSCON(port));
-
-	return 0;
+	return regmap_update_bits(s->syscon, SYSCON_OFFSET,
+				  SYSCON_UARTEN, SYSCON_UARTEN);
 }
 
 static void uart_clps711x_shutdown(struct uart_port *port)
 {
-	/* Free the interrupts */
-	devm_free_irq(port->dev, TX_IRQ(port), port);
-	devm_free_irq(port->dev, RX_IRQ(port), port);
+	struct clps711x_port *s = dev_get_drvdata(port->dev);
 
 	/* Disable the port */
-	clps_writel(clps_readl(SYSCON(port)) & ~SYSCON_UARTEN, SYSCON(port));
+	regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0);
 }
 
 static void uart_clps711x_set_termios(struct uart_port *port,
 				      struct ktermios *termios,
 				      struct ktermios *old)
 {
-	unsigned int ubrlcr, baud, quot;
-	unsigned long flags;
+	u32 ubrlcr;
+	unsigned int baud, quot;
 
 	/* Mask termios capabilities we don't support */
 	termios->c_cflag &= ~CMSPAR;
@@ -291,8 +309,6 @@ static void uart_clps711x_set_termios(struct uart_port *port,
 	/* Enable FIFO */
 	ubrlcr |= UBRLCR_FIFOEN;
 
-	spin_lock_irqsave(&port->lock, flags);
-
 	/* Set read status mask */
 	port->read_status_mask = UARTDR_OVERR;
 	if (termios->c_iflag & INPCK)
@@ -306,9 +322,7 @@ static void uart_clps711x_set_termios(struct uart_port *port,
 
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	clps_writel(ubrlcr | (quot - 1), UBRLCR(port));
-
-	spin_unlock_irqrestore(&port->lock, flags);
+	writel(ubrlcr | (quot - 1), port->membase + UBRLCR_OFFSET);
 }
 
 static const char *uart_clps711x_type(struct uart_port *port)
@@ -322,14 +336,12 @@ static void uart_clps711x_config_port(struct uart_port *port, int flags)
 		port->type = PORT_CLPS711X;
 }
 
-static void uart_clps711x_release_port(struct uart_port *port)
+static void uart_clps711x_nop_void(struct uart_port *port)
 {
-	/* Do nothing */
 }
 
-static int uart_clps711x_request_port(struct uart_port *port)
+static int uart_clps711x_nop_int(struct uart_port *port)
 {
-	/* Do nothing */
 	return 0;
 }
 
@@ -339,181 +351,237 @@ static const struct uart_ops uart_clps711x_ops = {
 	.get_mctrl	= uart_clps711x_get_mctrl,
 	.stop_tx	= uart_clps711x_stop_tx,
 	.start_tx	= uart_clps711x_start_tx,
-	.stop_rx	= uart_clps711x_stop_rx,
-	.enable_ms	= uart_clps711x_enable_ms,
+	.stop_rx	= uart_clps711x_nop_void,
+	.enable_ms	= uart_clps711x_nop_void,
 	.break_ctl	= uart_clps711x_break_ctl,
+	.set_ldisc	= uart_clps711x_set_ldisc,
 	.startup	= uart_clps711x_startup,
 	.shutdown	= uart_clps711x_shutdown,
 	.set_termios	= uart_clps711x_set_termios,
 	.type		= uart_clps711x_type,
 	.config_port	= uart_clps711x_config_port,
-	.release_port	= uart_clps711x_release_port,
-	.request_port	= uart_clps711x_request_port,
+	.release_port	= uart_clps711x_nop_void,
+	.request_port	= uart_clps711x_nop_int,
 };
 
 #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
 static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
 {
-	while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF)
-		barrier();
+	struct clps711x_port *s = dev_get_drvdata(port->dev);
+	u32 sysflg = 0;
+
+	do {
+		regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+	} while (sysflg & SYSFLG_UTXFF);
 
-	clps_writew(ch, UARTDR(port));
+	writew(ch, port->membase + UARTDR_OFFSET);
 }
 
 static void uart_clps711x_console_write(struct console *co, const char *c,
 					unsigned n)
 {
-	struct clps711x_port *s = (struct clps711x_port *)co->data;
-	struct uart_port *port = &s->port[co->index];
-	u32 syscon;
-
-	/* Ensure that the port is enabled */
-	syscon = clps_readl(SYSCON(port));
-	clps_writel(syscon | SYSCON_UARTEN, SYSCON(port));
+	struct uart_port *port = clps711x_uart.state[co->index].uart_port;
+	struct clps711x_port *s = dev_get_drvdata(port->dev);
+	u32 sysflg = 0;
 
 	uart_console_write(port, c, n, uart_clps711x_console_putchar);
 
 	/* Wait for transmitter to become empty */
-	while (clps_readl(SYSFLG(port)) & SYSFLG_UBUSY)
-		barrier();
-
-	/* Restore the uart state */
-	clps_writel(syscon, SYSCON(port));
+	do {
+		regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+	} while (sysflg & SYSFLG_UBUSY);
 }
 
-static void uart_clps711x_console_get_options(struct uart_port *port,
-					      int *baud, int *parity,
-					      int *bits)
+static int uart_clps711x_console_setup(struct console *co, char *options)
 {
-	if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) {
-		unsigned int ubrlcr, quot;
+	int baud = 38400, bits = 8, parity = 'n', flow = 'n';
+	int ret, index = co->index;
+	struct clps711x_port *s;
+	struct uart_port *port;
+	unsigned int quot;
+	u32 ubrlcr;
 
-		ubrlcr = clps_readl(UBRLCR(port));
+	if (index < 0 || index >= UART_CLPS711X_NR)
+		return -EINVAL;
 
-		*parity = 'n';
-		if (ubrlcr & UBRLCR_PRTEN) {
-			if (ubrlcr & UBRLCR_EVENPRT)
-				*parity = 'e';
-			else
-				*parity = 'o';
-		}
+	port = clps711x_uart.state[index].uart_port;
+	if (!port)
+		return -ENODEV;
 
-		if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7)
-			*bits = 7;
-		else
-			*bits = 8;
+	s = dev_get_drvdata(port->dev);
 
-		quot = ubrlcr & UBRLCR_BAUD_MASK;
-		*baud = port->uartclk / (16 * (quot + 1));
-	}
-}
+	if (!options) {
+		u32 syscon = 0;
 
-static int uart_clps711x_console_setup(struct console *co, char *options)
-{
-	int baud = 38400, bits = 8, parity = 'n', flow = 'n';
-	struct clps711x_port *s = (struct clps711x_port *)co->data;
-	struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0];
+		regmap_read(s->syscon, SYSCON_OFFSET, &syscon);
+		if (syscon & SYSCON_UARTEN) {
+			ubrlcr = readl(port->membase + UBRLCR_OFFSET);
+
+			if (ubrlcr & UBRLCR_PRTEN) {
+				if (ubrlcr & UBRLCR_EVENPRT)
+					parity = 'e';
+				else
+					parity = 'o';
+			}
+
+			if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7)
+				bits = 7;
 
-	if (options)
+			quot = ubrlcr & UBRLCR_BAUD_MASK;
+			baud = port->uartclk / (16 * (quot + 1));
+		}
+	} else
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
-	else
-		uart_clps711x_console_get_options(port, &baud, &parity, &bits);
 
-	return uart_set_options(port, co, baud, parity, bits, flow);
+	ret = uart_set_options(port, co, baud, parity, bits, flow);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(s->syscon, SYSCON_OFFSET,
+				  SYSCON_UARTEN, SYSCON_UARTEN);
 }
+
+static struct console clps711x_console = {
+	.name	= UART_CLPS711X_DEVNAME,
+	.device	= uart_console_device,
+	.write	= uart_clps711x_console_write,
+	.setup	= uart_clps711x_console_setup,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
+};
 #endif
 
 static int uart_clps711x_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
+	int ret, index = np ? of_alias_get_id(np, "serial") : pdev->id;
 	struct clps711x_port *s;
-	int ret, i;
+	struct resource *res;
+	struct clk *uart_clk;
 
-	s = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_port), GFP_KERNEL);
-	if (!s) {
-		dev_err(&pdev->dev, "Error allocating port structure\n");
+	if (index < 0 || index >= UART_CLPS711X_NR)
+		return -EINVAL;
+
+	s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
+	if (!s)
 		return -ENOMEM;
+
+	uart_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(uart_clk))
+		return PTR_ERR(uart_clk);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	s->port.membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(s->port.membase))
+		return PTR_ERR(s->port.membase);
+
+	s->port.irq = platform_get_irq(pdev, 0);
+	if (IS_ERR_VALUE(s->port.irq))
+		return s->port.irq;
+
+	s->rx_irq = platform_get_irq(pdev, 1);
+	if (IS_ERR_VALUE(s->rx_irq))
+		return s->rx_irq;
+
+	if (!np) {
+		char syscon_name[9];
+
+		sprintf(syscon_name, "syscon.%i", index + 1);
+		s->syscon = syscon_regmap_lookup_by_pdevname(syscon_name);
+		if (IS_ERR(s->syscon))
+			return PTR_ERR(s->syscon);
+
+		s->use_ms = !index;
+	} else {
+		s->syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
+		if (IS_ERR(s->syscon))
+			return PTR_ERR(s->syscon);
+
+		if (!index)
+			s->use_ms = of_property_read_bool(np, "uart-use-ms");
 	}
+
+	s->port.line		= index;
+	s->port.dev		= &pdev->dev;
+	s->port.iotype		= UPIO_MEM32;
+	s->port.mapbase		= res->start;
+	s->port.type		= PORT_CLPS711X;
+	s->port.fifosize	= 16;
+	s->port.flags		= UPF_SKIP_TEST | UPF_FIXED_TYPE;
+	s->port.uartclk		= clk_get_rate(uart_clk);
+	s->port.ops		= &uart_clps711x_ops;
+
 	platform_set_drvdata(pdev, s);
 
-	s->uart_clk = devm_clk_get(&pdev->dev, "uart");
-	if (IS_ERR(s->uart_clk)) {
-		dev_err(&pdev->dev, "Can't get UART clocks\n");
-		return PTR_ERR(s->uart_clk);
-	}
+	ret = uart_add_one_port(&clps711x_uart, &s->port);
+	if (ret)
+		return ret;
 
-	s->uart.owner		= THIS_MODULE;
-	s->uart.dev_name	= "ttyCL";
-	s->uart.major		= UART_CLPS711X_MAJOR;
-	s->uart.minor		= UART_CLPS711X_MINOR;
-	s->uart.nr		= UART_CLPS711X_NR;
-#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
-	s->uart.cons		= &s->console;
-	s->uart.cons->device	= uart_console_device;
-	s->uart.cons->write	= uart_clps711x_console_write;
-	s->uart.cons->setup	= uart_clps711x_console_setup;
-	s->uart.cons->flags	= CON_PRINTBUFFER;
-	s->uart.cons->index	= -1;
-	s->uart.cons->data	= s;
-	strcpy(s->uart.cons->name, "ttyCL");
-#endif
-	ret = uart_register_driver(&s->uart);
+	/* Disable port */
+	if (!uart_console(&s->port))
+		regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0);
+
+	s->tx_enabled = 1;
+
+	ret = devm_request_irq(&pdev->dev, s->port.irq, uart_clps711x_int_tx, 0,
+			       dev_name(&pdev->dev), &s->port);
 	if (ret) {
-		dev_err(&pdev->dev, "Registering UART driver failed\n");
+		uart_remove_one_port(&clps711x_uart, &s->port);
 		return ret;
 	}
 
-	for (i = 0; i < UART_CLPS711X_NR; i++) {
-		s->port[i].line		= i;
-		s->port[i].dev		= &pdev->dev;
-		s->port[i].irq		= TX_IRQ(&s->port[i]);
-		s->port[i].iobase	= SYSCON(&s->port[i]);
-		s->port[i].type		= PORT_CLPS711X;
-		s->port[i].fifosize	= 16;
-		s->port[i].flags	= UPF_SKIP_TEST | UPF_FIXED_TYPE;
-		s->port[i].uartclk	= clk_get_rate(s->uart_clk);
-		s->port[i].ops		= &uart_clps711x_ops;
-		WARN_ON(uart_add_one_port(&s->uart, &s->port[i]));
-	}
+	ret = devm_request_irq(&pdev->dev, s->rx_irq, uart_clps711x_int_rx, 0,
+			       dev_name(&pdev->dev), &s->port);
+	if (ret)
+		uart_remove_one_port(&clps711x_uart, &s->port);
 
-	return 0;
+	return ret;
 }
 
 static int uart_clps711x_remove(struct platform_device *pdev)
 {
 	struct clps711x_port *s = platform_get_drvdata(pdev);
-	int i;
 
-	for (i = 0; i < UART_CLPS711X_NR; i++)
-		uart_remove_one_port(&s->uart, &s->port[i]);
-
-	uart_unregister_driver(&s->uart);
-
-	return 0;
+	return uart_remove_one_port(&clps711x_uart, &s->port);
 }
 
-static struct platform_driver clps711x_uart_driver = {
+static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = {
+	{ .compatible = "cirrus,clps711x-uart", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, clps711x_uart_dt_ids);
+
+static struct platform_driver clps711x_uart_platform = {
 	.driver = {
-		.name	= UART_CLPS711X_NAME,
-		.owner	= THIS_MODULE,
+		.name		= "clps711x-uart",
+		.owner		= THIS_MODULE,
+		.of_match_table	= of_match_ptr(clps711x_uart_dt_ids),
 	},
 	.probe	= uart_clps711x_probe,
 	.remove	= uart_clps711x_remove,
 };
-module_platform_driver(clps711x_uart_driver);
-
-static struct platform_device clps711x_uart_device = {
-	.name	= UART_CLPS711X_NAME,
-};
 
 static int __init uart_clps711x_init(void)
 {
-	return platform_device_register(&clps711x_uart_device);
+	int ret;
+
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+	clps711x_uart.cons = &clps711x_console;
+	clps711x_console.data = &clps711x_uart;
+#endif
+
+	ret = uart_register_driver(&clps711x_uart);
+	if (ret)
+		return ret;
+
+	return platform_driver_register(&clps711x_uart_platform);
 }
 module_init(uart_clps711x_init);
 
 static void __exit uart_clps711x_exit(void)
 {
-	platform_device_unregister(&clps711x_uart_device);
+	platform_driver_unregister(&clps711x_uart_platform);
+	uart_unregister_driver(&clps711x_uart);
 }
 module_exit(uart_clps711x_exit);
 
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c
index 527a969b0952..6d3b22e93246 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c
@@ -29,7 +29,6 @@
 #include <linux/tty.h>
 #include <linux/gfp.h>
 #include <linux/ioport.h>
-#include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c
index a4927e66e741..f46d2ca87209 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c
@@ -29,7 +29,6 @@
 #include <linux/tty.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index b2cfdb661947..d799140e53b6 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -806,6 +806,9 @@ static unsigned int imx_get_mctrl(struct uart_port *port)
 	if (readl(sport->port.membase + UCR2) & UCR2_CTS)
 		tmp |= TIOCM_RTS;
 
+	if (readl(sport->port.membase + uts_reg(sport)) & UTS_LOOP)
+		tmp |= TIOCM_LOOP;
+
 	return tmp;
 }
 
@@ -821,6 +824,11 @@ static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
 			temp |= UCR2_CTS;
 
 	writel(temp, sport->port.membase + UCR2);
+
+	temp = readl(sport->port.membase + uts_reg(sport)) & ~UTS_LOOP;
+	if (mctrl & TIOCM_LOOP)
+		temp |= UTS_LOOP;
+	writel(temp, sport->port.membase + uts_reg(sport));
 }
 
 /*
diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c
index 5dafcf1c227b..5f673b7ca50e 100644
--- a/drivers/tty/serial/kgdb_nmi.c
+++ b/drivers/tty/serial/kgdb_nmi.c
@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/compiler.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/atomic.h>
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index d8b6fee77a03..aa97fd845b4d 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -734,9 +734,12 @@ static void mxs_auart_reset(struct uart_port *u)
 
 static int mxs_auart_startup(struct uart_port *u)
 {
+	int ret;
 	struct mxs_auart_port *s = to_auart_port(u);
 
-	clk_prepare_enable(s->clk);
+	ret = clk_prepare_enable(s->clk);
+	if (ret)
+		return ret;
 
 	writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
 
@@ -957,7 +960,9 @@ auart_console_setup(struct console *co, char *options)
 	if (!s)
 		return -ENODEV;
 
-	clk_prepare_enable(s->clk);
+	ret = clk_prepare_enable(s->clk);
+	if (ret)
+		return ret;
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 2caf9c6f6149..99246606a256 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -9,7 +9,6 @@
  *  2 of the License, or (at your option) any later version.
  *
  */
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 0aa2b528ef3d..9cbd3acaf37f 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1853,7 +1853,6 @@ static void pch_uart_exit_port(struct eg20t_port *priv)
 		debugfs_remove(priv->debugfs);
 #endif
 	uart_remove_one_port(&pch_uart_driver, &priv->port);
-	pci_set_drvdata(priv->pdev, NULL);
 	free_page((unsigned long)priv->rxbuf.buf);
 }
 
@@ -1907,7 +1906,7 @@ static int pch_uart_pci_resume(struct pci_dev *pdev)
 #define pch_uart_pci_resume NULL
 #endif
 
-static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
+static const struct pci_device_id pch_uart_pci_id[] = {
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
 	 .driver_data = pch_et20t_uart0},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c
index 328d6deb6b08..056f91b3a4ca 100644
--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -810,7 +810,7 @@ static void rp2_remove(struct pci_dev *pdev)
 	rp2_remove_ports(card);
 }
 
-static DEFINE_PCI_DEVICE_TABLE(rp2_pci_tbl) = {
+static const struct pci_device_id rp2_pci_tbl[] = {
 
 	/* RocketPort INFINITY cards */
 
diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c
deleted file mode 100644
index 887b4f770749..000000000000
--- a/drivers/tty/serial/sc26xx.c
+++ /dev/null
@@ -1,749 +0,0 @@
-/*
- * SC268xx.c: Serial driver for Philiphs SC2681/SC2692 devices.
- *
- * Copyright (C) 2006,2007 Thomas Bogendörfer (tsbogend@alpha.franken.de)
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/circ_buf.h>
-#include <linux/serial.h>
-#include <linux/sysrq.h>
-#include <linux/console.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#warning "Please try migrate to use new driver SCCNXP and report the status" \
-	 "in the linux-serial mailing list."
-
-#if defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/serial_core.h>
-
-#define SC26XX_MAJOR         204
-#define SC26XX_MINOR_START   205
-#define SC26XX_NR            2
-
-struct uart_sc26xx_port {
-	struct uart_port      port[2];
-	u8     dsr_mask[2];
-	u8     cts_mask[2];
-	u8     dcd_mask[2];
-	u8     ri_mask[2];
-	u8     dtr_mask[2];
-	u8     rts_mask[2];
-	u8     imr;
-};
-
-/* register common to both ports */
-#define RD_ISR      0x14
-#define RD_IPR      0x34
-
-#define WR_ACR      0x10
-#define WR_IMR      0x14
-#define WR_OPCR     0x34
-#define WR_OPR_SET  0x38
-#define WR_OPR_CLR  0x3C
-
-/* access common register */
-#define READ_SC(p, r)        readb((p)->membase + RD_##r)
-#define WRITE_SC(p, r, v)    writeb((v), (p)->membase + WR_##r)
-
-/* register per port */
-#define RD_PORT_MRx 0x00
-#define RD_PORT_SR  0x04
-#define RD_PORT_RHR 0x0c
-
-#define WR_PORT_MRx 0x00
-#define WR_PORT_CSR 0x04
-#define WR_PORT_CR  0x08
-#define WR_PORT_THR 0x0c
-
-/* SR bits */
-#define SR_BREAK    (1 << 7)
-#define SR_FRAME    (1 << 6)
-#define SR_PARITY   (1 << 5)
-#define SR_OVERRUN  (1 << 4)
-#define SR_TXRDY    (1 << 2)
-#define SR_RXRDY    (1 << 0)
-
-#define CR_RES_MR   (1 << 4)
-#define CR_RES_RX   (2 << 4)
-#define CR_RES_TX   (3 << 4)
-#define CR_STRT_BRK (6 << 4)
-#define CR_STOP_BRK (7 << 4)
-#define CR_DIS_TX   (1 << 3)
-#define CR_ENA_TX   (1 << 2)
-#define CR_DIS_RX   (1 << 1)
-#define CR_ENA_RX   (1 << 0)
-
-/* ISR bits */
-#define ISR_RXRDYB  (1 << 5)
-#define ISR_TXRDYB  (1 << 4)
-#define ISR_RXRDYA  (1 << 1)
-#define ISR_TXRDYA  (1 << 0)
-
-/* IMR bits */
-#define IMR_RXRDY   (1 << 1)
-#define IMR_TXRDY   (1 << 0)
-
-/* access port register */
-static inline u8 read_sc_port(struct uart_port *p, u8 reg)
-{
-	return readb(p->membase + p->line * 0x20 + reg);
-}
-
-static inline void write_sc_port(struct uart_port *p, u8 reg, u8 val)
-{
-	writeb(val, p->membase + p->line * 0x20 + reg);
-}
-
-#define READ_SC_PORT(p, r)     read_sc_port(p, RD_PORT_##r)
-#define WRITE_SC_PORT(p, r, v) write_sc_port(p, WR_PORT_##r, v)
-
-static void sc26xx_enable_irq(struct uart_port *port, int mask)
-{
-	struct uart_sc26xx_port *up;
-	int line = port->line;
-
-	port -= line;
-	up = container_of(port, struct uart_sc26xx_port, port[0]);
-
-	up->imr |= mask << (line * 4);
-	WRITE_SC(port, IMR, up->imr);
-}
-
-static void sc26xx_disable_irq(struct uart_port *port, int mask)
-{
-	struct uart_sc26xx_port *up;
-	int line = port->line;
-
-	port -= line;
-	up = container_of(port, struct uart_sc26xx_port, port[0]);
-
-	up->imr &= ~(mask << (line * 4));
-	WRITE_SC(port, IMR, up->imr);
-}
-
-static bool receive_chars(struct uart_port *port)
-{
-	struct tty_port *tport = NULL;
-	int limit = 10000;
-	unsigned char ch;
-	char flag;
-	u8 status;
-
-	/* FIXME what is this trying to achieve? */
-	if (port->state != NULL)		/* Unopened serial console */
-		tport = &port->state->port;
-
-	while (limit-- > 0) {
-		status = READ_SC_PORT(port, SR);
-		if (!(status & SR_RXRDY))
-			break;
-		ch = READ_SC_PORT(port, RHR);
-
-		flag = TTY_NORMAL;
-		port->icount.rx++;
-
-		if (unlikely(status & (SR_BREAK | SR_FRAME |
-				       SR_PARITY | SR_OVERRUN))) {
-			if (status & SR_BREAK) {
-				status &= ~(SR_PARITY | SR_FRAME);
-				port->icount.brk++;
-				if (uart_handle_break(port))
-					continue;
-			} else if (status & SR_PARITY)
-				port->icount.parity++;
-			else if (status & SR_FRAME)
-				port->icount.frame++;
-			if (status & SR_OVERRUN)
-				port->icount.overrun++;
-
-			status &= port->read_status_mask;
-			if (status & SR_BREAK)
-				flag = TTY_BREAK;
-			else if (status & SR_PARITY)
-				flag = TTY_PARITY;
-			else if (status & SR_FRAME)
-				flag = TTY_FRAME;
-		}
-
-		if (uart_handle_sysrq_char(port, ch))
-			continue;
-
-		if (status & port->ignore_status_mask)
-			continue;
-
-		tty_insert_flip_char(tport, ch, flag);
-	}
-	return !!tport;
-}
-
-static void transmit_chars(struct uart_port *port)
-{
-	struct circ_buf *xmit;
-
-	if (!port->state)
-		return;
-
-	xmit = &port->state->xmit;
-	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-		sc26xx_disable_irq(port, IMR_TXRDY);
-		return;
-	}
-	while (!uart_circ_empty(xmit)) {
-		if (!(READ_SC_PORT(port, SR) & SR_TXRDY))
-			break;
-
-		WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		port->icount.tx++;
-	}
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(port);
-}
-
-static irqreturn_t sc26xx_interrupt(int irq, void *dev_id)
-{
-	struct uart_sc26xx_port *up = dev_id;
-	unsigned long flags;
-	bool push;
-	u8 isr;
-
-	spin_lock_irqsave(&up->port[0].lock, flags);
-
-	push = false;
-	isr = READ_SC(&up->port[0], ISR);
-	if (isr & ISR_TXRDYA)
-	    transmit_chars(&up->port[0]);
-	if (isr & ISR_RXRDYA)
-	    push = receive_chars(&up->port[0]);
-
-	spin_unlock(&up->port[0].lock);
-
-	if (push)
-		tty_flip_buffer_push(&up->port[0].state->port);
-
-	spin_lock(&up->port[1].lock);
-
-	push = false;
-	if (isr & ISR_TXRDYB)
-	    transmit_chars(&up->port[1]);
-	if (isr & ISR_RXRDYB)
-	    push = receive_chars(&up->port[1]);
-
-	spin_unlock_irqrestore(&up->port[1].lock, flags);
-
-	if (push)
-		tty_flip_buffer_push(&up->port[1].state->port);
-
-	return IRQ_HANDLED;
-}
-
-/* port->lock is not held.  */
-static unsigned int sc26xx_tx_empty(struct uart_port *port)
-{
-	return (READ_SC_PORT(port, SR) & SR_TXRDY) ? TIOCSER_TEMT : 0;
-}
-
-/* port->lock held by caller.  */
-static void sc26xx_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-	struct uart_sc26xx_port *up;
-	int line = port->line;
-
-	port -= line;
-	up = container_of(port, struct uart_sc26xx_port, port[0]);
-
-	if (up->dtr_mask[line]) {
-		if (mctrl & TIOCM_DTR)
-			WRITE_SC(port, OPR_SET, up->dtr_mask[line]);
-		else
-			WRITE_SC(port, OPR_CLR, up->dtr_mask[line]);
-	}
-	if (up->rts_mask[line]) {
-		if (mctrl & TIOCM_RTS)
-			WRITE_SC(port, OPR_SET, up->rts_mask[line]);
-		else
-			WRITE_SC(port, OPR_CLR, up->rts_mask[line]);
-	}
-}
-
-/* port->lock is held by caller and interrupts are disabled.  */
-static unsigned int sc26xx_get_mctrl(struct uart_port *port)
-{
-	struct uart_sc26xx_port *up;
-	int line = port->line;
-	unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
-	u8 ipr;
-
-	port -= line;
-	up = container_of(port, struct uart_sc26xx_port, port[0]);
-	ipr = READ_SC(port, IPR) ^ 0xff;
-
-	if (up->dsr_mask[line]) {
-		mctrl &= ~TIOCM_DSR;
-		mctrl |= ipr & up->dsr_mask[line] ? TIOCM_DSR : 0;
-	}
-	if (up->cts_mask[line]) {
-		mctrl &= ~TIOCM_CTS;
-		mctrl |= ipr & up->cts_mask[line] ? TIOCM_CTS : 0;
-	}
-	if (up->dcd_mask[line]) {
-		mctrl &= ~TIOCM_CAR;
-		mctrl |= ipr & up->dcd_mask[line] ? TIOCM_CAR : 0;
-	}
-	if (up->ri_mask[line]) {
-		mctrl &= ~TIOCM_RNG;
-		mctrl |= ipr & up->ri_mask[line] ? TIOCM_RNG : 0;
-	}
-	return mctrl;
-}
-
-/* port->lock held by caller.  */
-static void sc26xx_stop_tx(struct uart_port *port)
-{
-	return;
-}
-
-/* port->lock held by caller.  */
-static void sc26xx_start_tx(struct uart_port *port)
-{
-	struct circ_buf *xmit = &port->state->xmit;
-
-	while (!uart_circ_empty(xmit)) {
-		if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) {
-			sc26xx_enable_irq(port, IMR_TXRDY);
-			break;
-		}
-		WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		port->icount.tx++;
-	}
-}
-
-/* port->lock held by caller.  */
-static void sc26xx_stop_rx(struct uart_port *port)
-{
-}
-
-/* port->lock held by caller.  */
-static void sc26xx_enable_ms(struct uart_port *port)
-{
-}
-
-/* port->lock is not held.  */
-static void sc26xx_break_ctl(struct uart_port *port, int break_state)
-{
-	if (break_state == -1)
-		WRITE_SC_PORT(port, CR, CR_STRT_BRK);
-	else
-		WRITE_SC_PORT(port, CR, CR_STOP_BRK);
-}
-
-/* port->lock is not held.  */
-static int sc26xx_startup(struct uart_port *port)
-{
-	sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
-	WRITE_SC(port, OPCR, 0);
-
-	/* reset tx and rx */
-	WRITE_SC_PORT(port, CR, CR_RES_RX);
-	WRITE_SC_PORT(port, CR, CR_RES_TX);
-
-	/* start rx/tx */
-	WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX);
-
-	/* enable irqs */
-	sc26xx_enable_irq(port, IMR_RXRDY);
-	return 0;
-}
-
-/* port->lock is not held.  */
-static void sc26xx_shutdown(struct uart_port *port)
-{
-	/* disable interrupst */
-	sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
-
-	/* stop tx/rx */
-	WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX);
-}
-
-/* port->lock is not held.  */
-static void sc26xx_set_termios(struct uart_port *port, struct ktermios *termios,
-			      struct ktermios *old)
-{
-	unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
-	unsigned int quot = uart_get_divisor(port, baud);
-	unsigned int iflag, cflag;
-	unsigned long flags;
-	u8 mr1, mr2, csr;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc)
-		udelay(2);
-
-	WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX);
-
-	iflag = termios->c_iflag;
-	cflag = termios->c_cflag;
-
-	port->read_status_mask = SR_OVERRUN;
-	if (iflag & INPCK)
-		port->read_status_mask |= SR_PARITY | SR_FRAME;
-	if (iflag & (BRKINT | PARMRK))
-		port->read_status_mask |= SR_BREAK;
-
-	port->ignore_status_mask = 0;
-	if (iflag & IGNBRK)
-		port->ignore_status_mask |= SR_BREAK;
-	if ((cflag & CREAD) == 0)
-		port->ignore_status_mask |= SR_BREAK | SR_FRAME |
-					    SR_PARITY | SR_OVERRUN;
-
-	switch (cflag & CSIZE) {
-	case CS5:
-		mr1 = 0x00;
-		break;
-	case CS6:
-		mr1 = 0x01;
-		break;
-	case CS7:
-		mr1 = 0x02;
-		break;
-	default:
-	case CS8:
-		mr1 = 0x03;
-		break;
-	}
-	mr2 = 0x07;
-	if (cflag & CSTOPB)
-		mr2 = 0x0f;
-	if (cflag & PARENB) {
-		if (cflag & PARODD)
-			mr1 |= (1 << 2);
-	} else
-		mr1 |= (2 << 3);
-
-	switch (baud) {
-	case 50:
-		csr = 0x00;
-		break;
-	case 110:
-		csr = 0x11;
-		break;
-	case 134:
-		csr = 0x22;
-		break;
-	case 200:
-		csr = 0x33;
-		break;
-	case 300:
-		csr = 0x44;
-		break;
-	case 600:
-		csr = 0x55;
-		break;
-	case 1200:
-		csr = 0x66;
-		break;
-	case 2400:
-		csr = 0x88;
-		break;
-	case 4800:
-		csr = 0x99;
-		break;
-	default:
-	case 9600:
-		csr = 0xbb;
-		break;
-	case 19200:
-		csr = 0xcc;
-		break;
-	}
-
-	WRITE_SC_PORT(port, CR, CR_RES_MR);
-	WRITE_SC_PORT(port, MRx, mr1);
-	WRITE_SC_PORT(port, MRx, mr2);
-
-	WRITE_SC(port, ACR, 0x80);
-	WRITE_SC_PORT(port, CSR, csr);
-
-	/* reset tx and rx */
-	WRITE_SC_PORT(port, CR, CR_RES_RX);
-	WRITE_SC_PORT(port, CR, CR_RES_TX);
-
-	WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX);
-	while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc)
-		udelay(2);
-
-	/* XXX */
-	uart_update_timeout(port, cflag,
-			    (port->uartclk / (16 * quot)));
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char *sc26xx_type(struct uart_port *port)
-{
-	return "SC26XX";
-}
-
-static void sc26xx_release_port(struct uart_port *port)
-{
-}
-
-static int sc26xx_request_port(struct uart_port *port)
-{
-	return 0;
-}
-
-static void sc26xx_config_port(struct uart_port *port, int flags)
-{
-}
-
-static int sc26xx_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
-	return -EINVAL;
-}
-
-static struct uart_ops sc26xx_ops = {
-	.tx_empty	= sc26xx_tx_empty,
-	.set_mctrl	= sc26xx_set_mctrl,
-	.get_mctrl	= sc26xx_get_mctrl,
-	.stop_tx	= sc26xx_stop_tx,
-	.start_tx	= sc26xx_start_tx,
-	.stop_rx	= sc26xx_stop_rx,
-	.enable_ms	= sc26xx_enable_ms,
-	.break_ctl	= sc26xx_break_ctl,
-	.startup	= sc26xx_startup,
-	.shutdown	= sc26xx_shutdown,
-	.set_termios	= sc26xx_set_termios,
-	.type		= sc26xx_type,
-	.release_port	= sc26xx_release_port,
-	.request_port	= sc26xx_request_port,
-	.config_port	= sc26xx_config_port,
-	.verify_port	= sc26xx_verify_port,
-};
-
-static struct uart_port *sc26xx_port;
-
-#ifdef CONFIG_SERIAL_SC26XX_CONSOLE
-static void sc26xx_console_putchar(struct uart_port *port, char c)
-{
-	unsigned long flags;
-	int limit = 1000000;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	while (limit-- > 0) {
-		if (READ_SC_PORT(port, SR) & SR_TXRDY) {
-			WRITE_SC_PORT(port, THR, c);
-			break;
-		}
-		udelay(2);
-	}
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void sc26xx_console_write(struct console *con, const char *s, unsigned n)
-{
-	struct uart_port *port = sc26xx_port;
-	int i;
-
-	for (i = 0; i < n; i++) {
-		if (*s == '\n')
-			sc26xx_console_putchar(port, '\r');
-		sc26xx_console_putchar(port, *s++);
-	}
-}
-
-static int __init sc26xx_console_setup(struct console *con, char *options)
-{
-	struct uart_port *port = sc26xx_port;
-	int baud = 9600;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	if (port->type != PORT_SC26XX)
-		return -1;
-
-	printk(KERN_INFO "Console: ttySC%d (SC26XX)\n", con->index);
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-
-	return uart_set_options(port, con, baud, parity, bits, flow);
-}
-
-static struct uart_driver sc26xx_reg;
-static struct console sc26xx_console = {
-	.name	=	"ttySC",
-	.write	=	sc26xx_console_write,
-	.device	=	uart_console_device,
-	.setup  =       sc26xx_console_setup,
-	.flags	=	CON_PRINTBUFFER,
-	.index	=	-1,
-	.data	=	&sc26xx_reg,
-};
-#define SC26XX_CONSOLE   &sc26xx_console
-#else
-#define SC26XX_CONSOLE   NULL
-#endif
-
-static struct uart_driver sc26xx_reg = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "SC26xx",
-	.dev_name		= "ttySC",
-	.major			= SC26XX_MAJOR,
-	.minor			= SC26XX_MINOR_START,
-	.nr			= SC26XX_NR,
-	.cons                   = SC26XX_CONSOLE,
-};
-
-static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos)
-{
-	unsigned int bit = (flags >> bitpos) & 15;
-
-	return bit ? (1 << (bit - 1)) : 0;
-}
-
-static void sc26xx_init_masks(struct uart_sc26xx_port *up,
-					int line, unsigned int data)
-{
-	up->dtr_mask[line] = sc26xx_flags2mask(data,  0);
-	up->rts_mask[line] = sc26xx_flags2mask(data,  4);
-	up->dsr_mask[line] = sc26xx_flags2mask(data,  8);
-	up->cts_mask[line] = sc26xx_flags2mask(data, 12);
-	up->dcd_mask[line] = sc26xx_flags2mask(data, 16);
-	up->ri_mask[line]  = sc26xx_flags2mask(data, 20);
-}
-
-static int sc26xx_probe(struct platform_device *dev)
-{
-	struct resource *res;
-	struct uart_sc26xx_port *up;
-	unsigned int *sc26xx_data = dev_get_platdata(&dev->dev);
-	int err;
-
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
-	up = kzalloc(sizeof *up, GFP_KERNEL);
-	if (unlikely(!up))
-		return -ENOMEM;
-
-	up->port[0].line = 0;
-	up->port[0].ops = &sc26xx_ops;
-	up->port[0].type = PORT_SC26XX;
-	up->port[0].uartclk = (29491200 / 16); /* arbitrary */
-
-	up->port[0].mapbase = res->start;
-	up->port[0].membase = ioremap_nocache(up->port[0].mapbase, 0x40);
-	up->port[0].iotype = UPIO_MEM;
-	up->port[0].irq = platform_get_irq(dev, 0);
-
-	up->port[0].dev = &dev->dev;
-
-	sc26xx_init_masks(up, 0, sc26xx_data[0]);
-
-	sc26xx_port = &up->port[0];
-
-	up->port[1].line = 1;
-	up->port[1].ops = &sc26xx_ops;
-	up->port[1].type = PORT_SC26XX;
-	up->port[1].uartclk = (29491200 / 16); /* arbitrary */
-
-	up->port[1].mapbase = up->port[0].mapbase;
-	up->port[1].membase = up->port[0].membase;
-	up->port[1].iotype = UPIO_MEM;
-	up->port[1].irq = up->port[0].irq;
-
-	up->port[1].dev = &dev->dev;
-
-	sc26xx_init_masks(up, 1, sc26xx_data[1]);
-
-	err = uart_register_driver(&sc26xx_reg);
-	if (err)
-		goto out_free_port;
-
-	sc26xx_reg.tty_driver->name_base = sc26xx_reg.minor;
-
-	err = uart_add_one_port(&sc26xx_reg, &up->port[0]);
-	if (err)
-		goto out_unregister_driver;
-
-	err = uart_add_one_port(&sc26xx_reg, &up->port[1]);
-	if (err)
-		goto out_remove_port0;
-
-	err = request_irq(up->port[0].irq, sc26xx_interrupt, 0, "sc26xx", up);
-	if (err)
-		goto out_remove_ports;
-
-	platform_set_drvdata(dev, up);
-	return 0;
-
-out_remove_ports:
-	uart_remove_one_port(&sc26xx_reg, &up->port[1]);
-out_remove_port0:
-	uart_remove_one_port(&sc26xx_reg, &up->port[0]);
-
-out_unregister_driver:
-	uart_unregister_driver(&sc26xx_reg);
-
-out_free_port:
-	kfree(up);
-	sc26xx_port = NULL;
-	return err;
-}
-
-
-static int __exit sc26xx_driver_remove(struct platform_device *dev)
-{
-	struct uart_sc26xx_port *up = platform_get_drvdata(dev);
-
-	free_irq(up->port[0].irq, up);
-
-	uart_remove_one_port(&sc26xx_reg, &up->port[0]);
-	uart_remove_one_port(&sc26xx_reg, &up->port[1]);
-
-	uart_unregister_driver(&sc26xx_reg);
-
-	kfree(up);
-	sc26xx_port = NULL;
-
-	return 0;
-}
-
-static struct platform_driver sc26xx_driver = {
-	.probe	= sc26xx_probe,
-	.remove	= sc26xx_driver_remove,
-	.driver	= {
-		.name	= "SC26xx",
-		.owner	= THIS_MODULE,
-	},
-};
-
-module_platform_driver(sc26xx_driver);
-
-MODULE_AUTHOR("Thomas Bogendörfer");
-MODULE_DESCRIPTION("SC681/SC2692 serial driver");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:SC26xx");
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 0f02351c9239..ece2049bd270 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1830,9 +1830,13 @@ uart_set_options(struct uart_port *port, struct console *co,
 	/*
 	 * Ensure that the serial console lock is initialised
 	 * early.
+	 * If this port is a console, then the spinlock is already
+	 * initialised.
 	 */
-	spin_lock_init(&port->lock);
-	lockdep_set_class(&port->lock, &port_lock_key);
+	if (!(uart_console(port) && (port->cons->flags & CON_ENABLED))) {
+		spin_lock_init(&port->lock);
+		lockdep_set_class(&port->lock, &port_lock_key);
+	}
 
 	memset(&termios, 0, sizeof(struct ktermios));
 
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index f186a8fb8887..49a2ffd101a7 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -524,9 +524,11 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param)
 	struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st;
 	unsigned int count;
 	unsigned long flags;
+	struct dma_tx_state tx_state;
 
 	spin_lock_irqsave(&sirfport->rx_lock, flags);
-	while (sirfport->rx_completed != sirfport->rx_issued) {
+	while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan,
+		sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) {
 		sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
 					SIRFSOC_RX_DMA_BUF_SIZE);
 		sirfport->rx_completed++;
@@ -709,8 +711,10 @@ static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param)
 	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 	unsigned long flags;
+	struct dma_tx_state tx_state;
 	spin_lock_irqsave(&sirfport->rx_lock, flags);
-	while (sirfport->rx_completed != sirfport->rx_issued) {
+	while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan,
+			sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) {
 		sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
 					SIRFSOC_RX_DMA_BUF_SIZE);
 		if (rd_regl(port, ureg->sirfsoc_int_en_reg) &
@@ -1033,6 +1037,16 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
+static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state,
+			      unsigned int oldstate)
+{
+	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+	if (!state)
+		clk_prepare_enable(sirfport->clk);
+	else
+		clk_disable_unprepare(sirfport->clk);
+}
+
 static unsigned int sirfsoc_uart_init_tx_dma(struct uart_port *port)
 {
 	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
@@ -1264,6 +1278,7 @@ static struct uart_ops sirfsoc_uart_ops = {
 	.startup	= sirfsoc_uart_startup,
 	.shutdown	= sirfsoc_uart_shutdown,
 	.set_termios	= sirfsoc_uart_set_termios,
+	.pm		= sirfsoc_uart_pm,
 	.type		= sirfsoc_uart_type,
 	.release_port	= sirfsoc_uart_release_port,
 	.request_port	= sirfsoc_uart_request_port,
@@ -1486,7 +1501,6 @@ usp_no_flow_control:
 		ret = PTR_ERR(sirfport->clk);
 		goto err;
 	}
-	clk_prepare_enable(sirfport->clk);
 	port->uartclk = clk_get_rate(sirfport->clk);
 
 	port->ops = &sirfsoc_uart_ops;
@@ -1502,7 +1516,6 @@ usp_no_flow_control:
 	return 0;
 
 port_err:
-	clk_disable_unprepare(sirfport->clk);
 	clk_put(sirfport->clk);
 err:
 	return ret;
@@ -1512,38 +1525,42 @@ static int sirfsoc_uart_remove(struct platform_device *pdev)
 {
 	struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
 	struct uart_port *port = &sirfport->port;
-	clk_disable_unprepare(sirfport->clk);
 	clk_put(sirfport->clk);
 	uart_remove_one_port(&sirfsoc_uart_drv, port);
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int
-sirfsoc_uart_suspend(struct platform_device *pdev, pm_message_t state)
+sirfsoc_uart_suspend(struct device *pdev)
 {
-	struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
+	struct sirfsoc_uart_port *sirfport = dev_get_drvdata(pdev);
 	struct uart_port *port = &sirfport->port;
 	uart_suspend_port(&sirfsoc_uart_drv, port);
 	return 0;
 }
 
-static int sirfsoc_uart_resume(struct platform_device *pdev)
+static int sirfsoc_uart_resume(struct device *pdev)
 {
-	struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
+	struct sirfsoc_uart_port *sirfport = dev_get_drvdata(pdev);
 	struct uart_port *port = &sirfport->port;
 	uart_resume_port(&sirfsoc_uart_drv, port);
 	return 0;
 }
+#endif
+
+static const struct dev_pm_ops sirfsoc_uart_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sirfsoc_uart_suspend, sirfsoc_uart_resume)
+};
 
 static struct platform_driver sirfsoc_uart_driver = {
 	.probe		= sirfsoc_uart_probe,
 	.remove		= sirfsoc_uart_remove,
-	.suspend	= sirfsoc_uart_suspend,
-	.resume		= sirfsoc_uart_resume,
 	.driver		= {
 		.name	= SIRFUART_PORT_NAME,
 		.owner	= THIS_MODULE,
 		.of_match_table = sirfsoc_uart_ids,
+		.pm	= &sirfsoc_uart_pm_ops,
 	},
 };
 
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index e1ce141bad5e..5ae14b46cce0 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -3404,8 +3404,8 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp)
 
 	/* If port is closing, signal caller to try again */
 	if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
-		if (info->port.flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->port.close_wait);
+		wait_event_interruptible_tty(tty, info->port.close_wait,
+				     !(info->port.flags & ASYNC_CLOSING));
 		retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 			-EAGAIN : -ERESTARTSYS);
 		goto cleanup;
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 1abf946463f6..c359a91f7346 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -674,8 +674,8 @@ static int open(struct tty_struct *tty, struct file *filp)
 
 	/* If port is closing, signal caller to try again */
 	if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
-		if (info->port.flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->port.close_wait);
+		wait_event_interruptible_tty(tty, info->port.close_wait,
+					     !(info->port.flags & ASYNC_CLOSING));
 		retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 			-EAGAIN : -ERESTARTSYS);
 		goto cleanup;
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index dc6e96996ead..144202eef6fe 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -754,8 +754,8 @@ static int open(struct tty_struct *tty, struct file *filp)
 
 	/* If port is closing, signal caller to try again */
 	if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
-		if (info->port.flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->port.close_wait);
+		wait_event_interruptible_tty(tty, info->port.close_wait,
+					     !(info->port.flags & ASYNC_CLOSING));
 		retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 			-EAGAIN : -ERESTARTSYS);
 		goto cleanup;
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index c043136fbe51..765125dff20e 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -11,7 +11,6 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
-#include <linux/init.h>
 #include <linux/wait.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
@@ -26,7 +25,7 @@
  * Byte threshold to limit memory consumption for flip buffers.
  * The actual memory limit is > 2x this amount.
  */
-#define TTYB_MEM_LIMIT	65536
+#define TTYB_DEFAULT_MEM_LIMIT	65536
 
 /*
  * We default to dicing tty buffer allocations to this many characters
@@ -89,9 +88,10 @@ void tty_buffer_unlock_exclusive(struct tty_port *port)
 
 int tty_buffer_space_avail(struct tty_port *port)
 {
-	int space = TTYB_MEM_LIMIT - atomic_read(&port->buf.memory_used);
+	int space = port->buf.mem_limit - atomic_read(&port->buf.mem_used);
 	return max(space, 0);
 }
+EXPORT_SYMBOL_GPL(tty_buffer_space_avail);
 
 static void tty_buffer_reset(struct tty_buffer *p, size_t size)
 {
@@ -100,6 +100,7 @@ static void tty_buffer_reset(struct tty_buffer *p, size_t size)
 	p->next = NULL;
 	p->commit = 0;
 	p->read = 0;
+	p->flags = 0;
 }
 
 /**
@@ -129,7 +130,7 @@ void tty_buffer_free_all(struct tty_port *port)
 	buf->head = &buf->sentinel;
 	buf->tail = &buf->sentinel;
 
-	atomic_set(&buf->memory_used, 0);
+	atomic_set(&buf->mem_used, 0);
 }
 
 /**
@@ -162,7 +163,7 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
 
 	/* Should possibly check if this fails for the largest buffer we
 	   have queued and recycle that ? */
-	if (atomic_read(&port->buf.memory_used) > TTYB_MEM_LIMIT)
+	if (atomic_read(&port->buf.mem_used) > port->buf.mem_limit)
 		return NULL;
 	p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
 	if (p == NULL)
@@ -170,7 +171,7 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
 
 found:
 	tty_buffer_reset(p, size);
-	atomic_add(size, &port->buf.memory_used);
+	atomic_add(size, &port->buf.mem_used);
 	return p;
 }
 
@@ -188,7 +189,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
 	struct tty_bufhead *buf = &port->buf;
 
 	/* Dumb strategy for now - should keep some stats */
-	WARN_ON(atomic_sub_return(b->size, &buf->memory_used) < 0);
+	WARN_ON(atomic_sub_return(b->size, &buf->mem_used) < 0);
 
 	if (b->size > MIN_TTYB_SIZE)
 		kfree(b);
@@ -200,9 +201,7 @@ static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
  *	tty_buffer_flush		-	flush full tty buffers
  *	@tty: tty to flush
  *
- *	flush all the buffers containing receive data. If the buffer is
- *	being processed by flush_to_ldisc then we defer the processing
- *	to that function
+ *	flush all the buffers containing receive data.
  *
  *	Locking: takes buffer lock to ensure single-threaded flip buffer
  *		 'consumer'
@@ -230,31 +229,49 @@ void tty_buffer_flush(struct tty_struct *tty)
  *	tty_buffer_request_room		-	grow tty buffer if needed
  *	@tty: tty structure
  *	@size: size desired
+ *	@flags: buffer flags if new buffer allocated (default = 0)
  *
  *	Make at least size bytes of linear space available for the tty
  *	buffer. If we fail return the size we managed to find.
+ *
+ *	Will change over to a new buffer if the current buffer is encoded as
+ *	TTY_NORMAL (so has no flags buffer) and the new buffer requires
+ *	a flags buffer.
  */
-int tty_buffer_request_room(struct tty_port *port, size_t size)
+static int __tty_buffer_request_room(struct tty_port *port, size_t size,
+				     int flags)
 {
 	struct tty_bufhead *buf = &port->buf;
 	struct tty_buffer *b, *n;
-	int left;
+	int left, change;
 
 	b = buf->tail;
-	left = b->size - b->used;
+	if (b->flags & TTYB_NORMAL)
+		left = 2 * b->size - b->used;
+	else
+		left = b->size - b->used;
 
-	if (left < size) {
+	change = (b->flags & TTYB_NORMAL) && (~flags & TTYB_NORMAL);
+	if (change || left < size) {
 		/* This is the slow path - looking for new buffers to use */
 		if ((n = tty_buffer_alloc(port, size)) != NULL) {
+			n->flags = flags;
 			buf->tail = n;
 			b->commit = b->used;
 			smp_mb();
 			b->next = n;
-		} else
+		} else if (change)
+			size = 0;
+		else
 			size = left;
 	}
 	return size;
 }
+
+int tty_buffer_request_room(struct tty_port *port, size_t size)
+{
+	return __tty_buffer_request_room(port, size, 0);
+}
 EXPORT_SYMBOL_GPL(tty_buffer_request_room);
 
 /**
@@ -274,12 +291,14 @@ int tty_insert_flip_string_fixed_flag(struct tty_port *port,
 	int copied = 0;
 	do {
 		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
-		int space = tty_buffer_request_room(port, goal);
+		int flags = (flag == TTY_NORMAL) ? TTYB_NORMAL : 0;
+		int space = __tty_buffer_request_room(port, goal, flags);
 		struct tty_buffer *tb = port->buf.tail;
 		if (unlikely(space == 0))
 			break;
 		memcpy(char_buf_ptr(tb, tb->used), chars, space);
-		memset(flag_buf_ptr(tb, tb->used), flag, space);
+		if (~tb->flags & TTYB_NORMAL)
+			memset(flag_buf_ptr(tb, tb->used), flag, space);
 		tb->used += space;
 		copied += space;
 		chars += space;
@@ -362,52 +381,28 @@ EXPORT_SYMBOL(tty_schedule_flip);
 int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars,
 		size_t size)
 {
-	int space = tty_buffer_request_room(port, size);
+	int space = __tty_buffer_request_room(port, size, TTYB_NORMAL);
 	if (likely(space)) {
 		struct tty_buffer *tb = port->buf.tail;
 		*chars = char_buf_ptr(tb, tb->used);
-		memset(flag_buf_ptr(tb, tb->used), TTY_NORMAL, space);
+		if (~tb->flags & TTYB_NORMAL)
+			memset(flag_buf_ptr(tb, tb->used), TTY_NORMAL, space);
 		tb->used += space;
 	}
 	return space;
 }
 EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
 
-/**
- *	tty_prepare_flip_string_flags	-	make room for characters
- *	@port: tty port
- *	@chars: return pointer for character write area
- *	@flags: return pointer for status flag write area
- *	@size: desired size
- *
- *	Prepare a block of space in the buffer for data. Returns the length
- *	available and buffer pointer to the space which is now allocated and
- *	accounted for as ready for characters. This is used for drivers
- *	that need their own block copy routines into the buffer. There is no
- *	guarantee the buffer is a DMA target!
- */
-
-int tty_prepare_flip_string_flags(struct tty_port *port,
-			unsigned char **chars, char **flags, size_t size)
-{
-	int space = tty_buffer_request_room(port, size);
-	if (likely(space)) {
-		struct tty_buffer *tb = port->buf.tail;
-		*chars = char_buf_ptr(tb, tb->used);
-		*flags = flag_buf_ptr(tb, tb->used);
-		tb->used += space;
-	}
-	return space;
-}
-EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
-
 
 static int
 receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
 {
 	struct tty_ldisc *disc = tty->ldisc;
 	unsigned char *p = char_buf_ptr(head, head->read);
-	char	      *f = flag_buf_ptr(head, head->read);
+	char	      *f = NULL;
+
+	if (~head->flags & TTYB_NORMAL)
+		f = flag_buf_ptr(head, head->read);
 
 	if (disc->ops->receive_buf2)
 		count = disc->ops->receive_buf2(tty, p, f, count);
@@ -533,7 +528,25 @@ void tty_buffer_init(struct tty_port *port)
 	buf->head = &buf->sentinel;
 	buf->tail = &buf->sentinel;
 	init_llist_head(&buf->free);
-	atomic_set(&buf->memory_used, 0);
+	atomic_set(&buf->mem_used, 0);
 	atomic_set(&buf->priority, 0);
 	INIT_WORK(&buf->work, flush_to_ldisc);
+	buf->mem_limit = TTYB_DEFAULT_MEM_LIMIT;
+}
+
+/**
+ *	tty_buffer_set_limit	-	change the tty buffer memory limit
+ *	@port: tty port to change
+ *
+ *	Change the tty buffer memory limit.
+ *	Must be called before the other tty buffer functions are used.
+ */
+
+int tty_buffer_set_limit(struct tty_port *port, int limit)
+{
+	if (limit < MIN_TTYB_SIZE)
+		return -EINVAL;
+	port->buf.mem_limit = limit;
+	return 0;
 }
+EXPORT_SYMBOL_GPL(tty_buffer_set_limit);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 6458e11e8e9d..2d822aa259b2 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -11,7 +11,6 @@
 #include <linux/slab.h>
 #include <linux/poll.h>
 #include <linux/proc_fs.h>
-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/wait.h>
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index c94d2349dd06..3f746c8eb0dd 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -12,7 +12,6 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
-#include <linux/init.h>
 #include <linux/wait.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
diff --git a/include/linux/init.h b/include/linux/init.h
index 8e68a64bfe00..e1688802964f 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -286,9 +286,11 @@ void __init parse_early_options(char *cmdline);
 #define arch_initcall(fn)		module_init(fn)
 #define subsys_initcall(fn)		module_init(fn)
 #define fs_initcall(fn)			module_init(fn)
+#define rootfs_initcall(fn)		module_init(fn)
 #define device_initcall(fn)		module_init(fn)
 #define late_initcall(fn)		module_init(fn)
 
+#define console_initcall(fn)		module_init(fn)
 #define security_initcall(fn)		module_init(fn)
 
 /* Each module must use one module_init(). */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 97d660ed70c1..978d0f09d039 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -39,10 +39,14 @@ struct tty_buffer {
 	int size;
 	int commit;
 	int read;
+	int flags;
 	/* Data points here */
 	unsigned long data[0];
 };
 
+/* Values for .flags field of tty_buffer */
+#define TTYB_NORMAL	1	/* buffer has no flags buffer */
+
 static inline unsigned char *char_buf_ptr(struct tty_buffer *b, int ofs)
 {
 	return ((unsigned char *)b->data) + ofs;
@@ -60,7 +64,8 @@ struct tty_bufhead {
 	atomic_t	   priority;
 	struct tty_buffer sentinel;
 	struct llist_head free;		/* Free queue head */
-	atomic_t	   memory_used; /* In-use buffers excluding free list */
+	atomic_t	   mem_used;    /* In-use buffers excluding free list */
+	int		   mem_limit;
 	struct tty_buffer *tail;	/* Active buffer */
 };
 /*
@@ -422,7 +427,6 @@ extern int is_ignored(int sig);
 extern int tty_signal(int sig, struct tty_struct *tty);
 extern void tty_hangup(struct tty_struct *tty);
 extern void tty_vhangup(struct tty_struct *tty);
-extern void tty_vhangup_locked(struct tty_struct *tty);
 extern void tty_unhangup(struct file *filp);
 extern int tty_hung_up_p(struct file *filp);
 extern void do_SAK(struct tty_struct *tty);
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index 21ddd7d9ea1f..c28dd523f96e 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -1,6 +1,7 @@
 #ifndef _LINUX_TTY_FLIP_H
 #define _LINUX_TTY_FLIP_H
 
+extern int tty_buffer_set_limit(struct tty_port *port, int limit);
 extern int tty_buffer_space_avail(struct tty_port *port);
 extern int tty_buffer_request_room(struct tty_port *port, size_t size);
 extern int tty_insert_flip_string_flags(struct tty_port *port,
@@ -9,8 +10,6 @@ extern int tty_insert_flip_string_fixed_flag(struct tty_port *port,
 		const unsigned char *chars, char flag, size_t size);
 extern int tty_prepare_flip_string(struct tty_port *port,
 		unsigned char **chars, size_t size);
-extern int tty_prepare_flip_string_flags(struct tty_port *port,
-		unsigned char **chars, char **flags, size_t size);
 extern void tty_flip_buffer_push(struct tty_port *port);
 void tty_schedule_flip(struct tty_port *port);
 
@@ -18,8 +17,12 @@ static inline int tty_insert_flip_char(struct tty_port *port,
 					unsigned char ch, char flag)
 {
 	struct tty_buffer *tb = port->buf.tail;
-	if (tb && tb->used < tb->size) {
-		*flag_buf_ptr(tb, tb->used) = flag;
+	int change;
+
+	change = (tb->flags & TTYB_NORMAL) && (flag != TTY_NORMAL);
+	if (!change && tb->used < tb->size) {
+		if (~tb->flags & TTYB_NORMAL)
+			*flag_buf_ptr(tb, tb->used) = flag;
 		*char_buf_ptr(tb, tb->used++) = ch;
 		return 1;
 	}
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index f15c898ff462..b8347c207cb8 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -84,7 +84,8 @@
  *	processing.  <cp> is a pointer to the buffer of input
  *	character received by the device.  <fp> is a pointer to a
  *	pointer of flag bytes which indicate whether a character was
- *	received with a parity error, etc.
+ *	received with a parity error, etc. <fp> may be NULL to indicate
+ *	all data received is TTY_NORMAL.
  *
  * void	(*write_wakeup)(struct tty_struct *);
  *
@@ -118,7 +119,8 @@
  *	processing.  <cp> is a pointer to the buffer of input
  *	character received by the device.  <fp> is a pointer to a
  *	pointer of flag bytes which indicate whether a character was
- *	received with a parity error, etc.
+ *	received with a parity error, etc. <fp> may be NULL to indicate
+ *	all data received is TTY_NORMAL.
  *	If assigned, prefer this function for automatic flow control.
  */