x86: get mp_bus_to_node early

Currently, on an amd k8 system with multi ht chains, the numa_node of
pci devices under /sys/devices/pci0000:80/* is always 0, even if that
chain is on node 1 or 2 or 3.

Workaround: pcibus_to_node(bus) is used when we want to get the node that
pci_device is on.

In struct device, we already have numa_node member, and we could use
dev_to_node()/set_dev_node() to get and set numa_node in the device.
set_dev_node is called in pci_device_add() with pcibus_to_node(bus),
and pcibus_to_node uses bus->sysdata for nodeid.

The problem is when pci_add_device is called, bus->sysdata is not assigned
correct nodeid yet. The result is that numa_node will always be 0.

pcibios_scan_root and pci_scan_root could take sysdata. So we need to get
mp_bus_to_node mapping before these two are called, and thus
get_mp_bus_to_node could get correct node for sysdata in root bus.

In scanning of the root bus, all child busses will take parent bus sysdata.
So all pci_device->dev.numa_node will be assigned correctly and automatically.

Later we could use dev_to_node(&pci_dev->dev) to get numa_node, and we
could also could make other bus specific device get the correct numa_node
too.

This is an updated version of pci_sysdata and Jeff's pci_domain patch.

[ mingo@elte.hu: build fix ]

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

9 files changed, 142 insertions, 42 deletions

diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32
index cdd6828b5abb..e9c5caf54e59 100644
--- a/arch/x86/pci/Makefile_32
+++ b/arch/x86/pci/Makefile_32
@@ -10,5 +10,6 @@ pci-y				+= legacy.o irq.o
 
 pci-$(CONFIG_X86_VISWS)		:= visws.o fixup.o
 pci-$(CONFIG_X86_NUMAQ)		:= numa.o irq.o
+pci-$(CONFIG_NUMA)		+= mp_bus_to_node.o
 
 obj-y				+= $(pci-y) common.o early.o
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 2664cb3fc96c..1a9c0c6a1a18 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -191,7 +191,10 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 {
 	struct pci_bus *bus;
 	struct pci_sysdata *sd;
+	int node;
+#ifdef CONFIG_ACPI_NUMA
 	int pxm;
+#endif
 
 	dmi_check_system(acpi_pciprobe_dmi_table);
 
@@ -201,6 +204,17 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 		return NULL;
 	}
 
+	node = -1;
+#ifdef CONFIG_ACPI_NUMA
+	pxm = acpi_get_pxm(device->handle);
+	if (pxm >= 0)
+		node = pxm_to_node(pxm);
+	if (node != -1)
+		set_mp_bus_to_node(busnum, node);
+	else
+		node = get_mp_bus_to_node(busnum);
+#endif
+
 	/* Allocate per-root-bus (not per bus) arch-specific data.
 	 * TODO: leak; this memory is never freed.
 	 * It's arguable whether it's worth the trouble to care.
@@ -212,13 +226,7 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 	}
 
 	sd->domain = domain;
-	sd->node = -1;
-
-	pxm = acpi_get_pxm(device->handle);
-#ifdef CONFIG_ACPI_NUMA
-	if (pxm >= 0)
-		sd->node = pxm_to_node(pxm);
-#endif
+	sd->node = node;
 	/*
 	 * Maybe the desired pci bus has been already scanned. In such case
 	 * it is unnecessary to scan the pci bus with the given domain,busnum.
@@ -238,9 +246,9 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 		kfree(sd);
 
 #ifdef CONFIG_ACPI_NUMA
-	if (bus != NULL) {
+	if (bus) {
 		if (pxm >= 0) {
-			printk("bus %d -> pxm %d -> node %d\n",
+			printk(KERN_DEBUG "bus %02x -> pxm %d -> node %d\n",
 				busnum, pxm, pxm_to_node(pxm));
 		}
 	}
@@ -248,7 +256,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 
 	if (bus && (pci_probe & PCI_USE__CRS))
 		get_current_resources(device, busnum, domain, bus);
-	
 	return bus;
 }
 
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 75fcc29ecf52..07d53184f7a4 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -342,9 +342,14 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum)
 		return NULL;
 	}
 
+	sd->node = get_mp_bus_to_node(busnum);
+
 	printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
+	bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+	if (!bus)
+		kfree(sd);
 
-	return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+	return bus;
 }
 
 extern u8 pci_cache_line_size;
@@ -480,7 +485,7 @@ void pcibios_disable_device (struct pci_dev *dev)
 		pcibios_disable_irq(dev);
 }
 
-struct pci_bus *__devinit pci_scan_bus_with_sysdata(int busno)
+struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
 {
 	struct pci_bus *bus = NULL;
 	struct pci_sysdata *sd;
@@ -495,10 +500,15 @@ struct pci_bus *__devinit pci_scan_bus_with_sysdata(int busno)
 		printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno);
 		return NULL;
 	}
-	sd->node = -1;
-	bus = pci_scan_bus(busno, &pci_root_ops, sd);
+	sd->node = node;
+	bus = pci_scan_bus(busno, ops, sd);
 	if (!bus)
 		kfree(sd);
 
 	return bus;
 }
+
+struct pci_bus *pci_scan_bus_with_sysdata(int busno)
+{
+	return pci_scan_bus_on_node(busno, &pci_root_ops, -1);
+}
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 579745ca6b66..0908fca901bf 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -136,9 +136,11 @@ static void __init pirq_peer_trick(void)
 		busmap[e->bus] = 1;
 	}
 	for(i = 1; i < 256; i++) {
+		int node;
 		if (!busmap[i] || pci_find_bus(0, i))
 			continue;
-		if (pci_scan_bus_with_sysdata(i))
+		node = get_mp_bus_to_node(i);
+		if (pci_scan_bus_on_node(i, &pci_root_ops, node))
 			printk(KERN_INFO "PCI: Discovered primary peer "
 			       "bus %02x [IRQ]\n", i);
 	}
diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/k8-bus_64.c
index 9cc813e29706..3903efbca535 100644
--- a/arch/x86/pci/k8-bus_64.c
+++ b/arch/x86/pci/k8-bus_64.c
@@ -1,7 +1,9 @@
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <asm/pci-direct.h>
 #include <asm/mpspec.h>
 #include <linux/cpumask.h>
+#include <linux/topology.h>
 
 /*
  * This discovers the pcibus <-> node mapping on AMD K8.
@@ -20,64 +22,102 @@
 #define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF)
 #define PCI_DEVICE_ID_K8HTCONFIG 0x1100
 
+#ifdef CONFIG_NUMA
+
+#define BUS_NR 256
+
+static int mp_bus_to_node[BUS_NR];
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+	if (busnum >= 0 &&  busnum < BUS_NR)
+		mp_bus_to_node[busnum] = node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+	int node = -1;
+
+	if (busnum < 0 || busnum > (BUS_NR - 1))
+		return node;
+
+	node = mp_bus_to_node[busnum];
+
+	/*
+	 * let numa_node_id to decide it later in dma_alloc_pages
+	 * if there is no ram on that node
+	 */
+	if (node != -1 && !node_online(node))
+		node = -1;
+
+	return node;
+}
+
+#endif
+
 /**
- * fill_mp_bus_to_cpumask()
+ * early_fill_mp_bus_to_node()
+ * called before pcibios_scan_root and pci_scan_bus
  * fills the mp_bus_to_cpumask array based according to the LDT Bus Number
  * Registers found in the K8 northbridge
  */
 __init static int
-fill_mp_bus_to_cpumask(void)
+early_fill_mp_bus_to_node(void)
 {
-	struct pci_dev *nb_dev = NULL;
+#ifdef CONFIG_NUMA
 	int i, j;
+	unsigned slot;
 	u32 ldtbus, nid;
+	u32 id;
 	static int lbnr[3] = {
 		LDT_BUS_NUMBER_REGISTER_0,
 		LDT_BUS_NUMBER_REGISTER_1,
 		LDT_BUS_NUMBER_REGISTER_2
 	};
 
-	while ((nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-			PCI_DEVICE_ID_K8HTCONFIG, nb_dev))) {
-		pci_read_config_dword(nb_dev, NODE_ID_REGISTER, &nid);
+	for (i = 0; i < BUS_NR; i++)
+		mp_bus_to_node[i] = -1;
+
+	if (!early_pci_allowed())
+		return -1;
+
+	for (slot = 0x18; slot < 0x20; slot++) {
+		id = read_pci_config(0, slot, 0, PCI_VENDOR_ID);
+		if (id != (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_K8HTCONFIG<<16)))
+			break;
+		nid = read_pci_config(0, slot, 0, NODE_ID_REGISTER);
 
 		for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) {
-			pci_read_config_dword(nb_dev, lbnr[i], &ldtbus);
+			ldtbus = read_pci_config(0, slot, 0, lbnr[i]);
 			/*
 			 * if there are no busses hanging off of the current
 			 * ldt link then both the secondary and subordinate
 			 * bus number fields are set to 0.
-			 * 
+			 *
 			 * RED-PEN
 			 * This is slightly broken because it assumes
- 			 * HT node IDs == Linux node ids, which is not always
+			 * HT node IDs == Linux node ids, which is not always
 			 * true. However it is probably mostly true.
 			 */
 			if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0
 				&& SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) {
 				for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus);
 				     j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus);
-				     j++) { 
-					struct pci_bus *bus;
-					struct pci_sysdata *sd;
-
-					long node = NODE_ID(nid);
-					/* Algorithm a bit dumb, but
- 					   it shouldn't matter here */
-					bus = pci_find_bus(0, j);
-					if (!bus)
-						continue;
-					if (!node_online(node))
-						node = 0;
-
-					sd = bus->sysdata;
-					sd->node = node;
-				}		
+				     j++) {
+					int node = NODE_ID(nid);
+					mp_bus_to_node[j] = (unsigned char)node;
+				}
 			}
 		}
 	}
 
+	for (i = 0; i < BUS_NR; i++) {
+		int node = mp_bus_to_node[i];
+		if (node >= 0)
+			printk(KERN_DEBUG "bus: %02x to node: %02x\n", i, node);
+	}
+#endif
 	return 0;
 }
 
-fs_initcall(fill_mp_bus_to_cpumask);
+postcore_initcall(early_fill_mp_bus_to_node);
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index e041ced0ce13..a67921ce60af 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -12,6 +12,7 @@
 static void __devinit pcibios_fixup_peer_bridges(void)
 {
 	int n, devfn;
+	long node;
 
 	if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
 		return;
@@ -21,12 +22,13 @@ static void __devinit pcibios_fixup_peer_bridges(void)
 		u32 l;
 		if (pci_find_bus(0, n))
 			continue;
+		node = get_mp_bus_to_node(n);
 		for (devfn = 0; devfn < 256; devfn += 8) {
 			if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) &&
 			    l != 0x0000 && l != 0xffff) {
 				DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l);
 				printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
-				pci_scan_bus_with_sysdata(n);
+				pci_scan_bus_on_node(n, &pci_root_ops, node);
 				break;
 			}
 		}
diff --git a/arch/x86/pci/mp_bus_to_node.c b/arch/x86/pci/mp_bus_to_node.c
new file mode 100644
index 000000000000..022943999b84
--- /dev/null
+++ b/arch/x86/pci/mp_bus_to_node.c
@@ -0,0 +1,23 @@
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/topology.h>
+
+#define BUS_NR 256
+
+static unsigned char mp_bus_to_node[BUS_NR];
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+	if (busnum >= 0 &&  busnum < BUS_NR)
+	mp_bus_to_node[busnum] = (unsigned char) node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+	int node;
+
+	if (busnum < 0 || busnum > (BUS_NR - 1))
+		return 0;
+	node = mp_bus_to_node[busnum];
+	return node;
+}
diff --git a/include/asm-x86/pci.h b/include/asm-x86/pci.h
index ddd8e248fc0a..30bbde0cb34b 100644
--- a/include/asm-x86/pci.h
+++ b/include/asm-x86/pci.h
@@ -19,6 +19,8 @@ struct pci_sysdata {
 };
 
 /* scan a bus after allocating a pci_sysdata for it */
+extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops,
+					    int node);
 extern struct pci_bus *pci_scan_bus_with_sysdata(int busno);
 
 static inline int pci_domain_nr(struct pci_bus *bus)
diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h
index 22073268b481..4793ae745a78 100644
--- a/include/asm-x86/topology.h
+++ b/include/asm-x86/topology.h
@@ -198,4 +198,17 @@ extern cpumask_t cpu_coregroup_map(int cpu);
 #define smt_capable()			(smp_num_siblings > 1)
 #endif
 
+#ifdef CONFIG_NUMA
+extern int get_mp_bus_to_node(int busnum);
+extern void set_mp_bus_to_node(int busnum, int node);
+#else
+static inline int get_mp_bus_to_node(int busnum)
+{
+	return 0;
+}
+static inline void set_mp_bus_to_node(int busnum, int node)
+{
+}
+#endif
+
 #endif