ARM: dts: imx7-colibri-aster: Add support for Aster with Colibri iMX7

Add support for Aster Carrier Board with Colibri iMX7.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>

4 files changed, 321 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index bda4c22d9623..5f4cbcd7aa79 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -421,6 +421,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-12x12-lpddr3-arm2-mqs.dtb \
 	imx7d-12x12-lpddr3-arm2-pcie.dtb \
 	imx7d-19x19-lpddr2-arm2.dtb \
+	imx7d-colibri-aster.dtb \
+	imx7s-colibri-aster.dtb \
 	imx7d-colibri-eval-v3.dtb \
 	imx7s-colibri-eval-v3.dtb \
 	imx7d-sdb.dtb \
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
new file mode 100644
index 000000000000..d99208746b70
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
@@ -0,0 +1,278 @@
+/*
+ * Copyright 2017 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/ {
+	chosen {
+		bootargs = "console=ttymxc0,115200";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		power {
+			label = "Wake-Up";
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	extcon_usbc_det: usbc_det {
+		compatible = "linux,extcon-usb-gpio";
+		debounce = <25>;
+		id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&bl {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&adc2 {
+	status = "okay";
+};
+
+&epxp {
+	status = "okay";
+};
+
+&ecspi3 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <
+		&gpio4 11 GPIO_ACTIVE_HIGH
+		&gpio4 23 GPIO_ACTIVE_HIGH
+	>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_aster_spi_gpio>;
+	status = "okay";
+
+	spidev0: spidev@0 {
+		compatible = "toradex,evalspi";
+		reg = <0>;
+		spi-max-frequency = <23000000>;
+	};
+
+	spidev1: spidev@1 {
+		compatible = "toradex,evalspi";
+		reg = <1>;
+		spi-max-frequency = <23000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&lcdif {
+	display = <&display0>;
+	status = "okay";
+
+	display0: lcd-display {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing_vga>;
+
+			/* Standard VGA timing */
+			timing_vga: 640x480 {
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <24>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+
+				de-active = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pixelclk-active = <0>;
+			};
+
+			/* WVGA Timing, e.g. EDT ET070080DH6 */
+			timing_wvga: 800x480 {
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <216>;
+				hfront-porch = <40>;
+				vback-porch = <35>;
+				vfront-porch = <10>;
+				hsync-len = <128>;
+				vsync-len = <2>;
+
+				de-active = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pixelclk-active = <0>;
+			};
+
+			/* Standard SVGA timing */
+			timing_svga: 800x600 {
+				clock-frequency = <40000000>;
+				hactive = <800>;
+				vactive = <600>;
+				hback-porch = <88>;
+				hfront-porch = <40>;
+				vback-porch = <23>;
+				vfront-porch = <1>;
+				hsync-len = <128>;
+				vsync-len = <4>;
+
+				de-active = <1>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			/* Standard XGA timing */
+			timing_xga: 1024x768 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <160>;
+				hfront-porch = <24>;
+				vback-porch = <29>;
+				vfront-porch = <3>;
+				hsync-len = <136>;
+				vsync-len = <6>;
+
+				de-active = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbotg1 {
+	extcon = <&extcon_usbc_det>;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+/* The define SD_1_8 allows to use the SD interface at a higher speed mode
+ * if the card supports it. For this the signaling voltage is switched from
+ * 3.3V to 1.8V under the usdhc1's drivers control.
+ * All pins supplied with NVCC_SD1 must be able to cope with this
+ * and must (MUST!!!) not be driven with a voltage higher than 1.8V or
+ * the interface will not work.
+ */
+/* #define SD_1_8 */
+&usdhc1 {
+#ifdef SD_1_8
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_LDO2>;
+#else
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+	no-1-8-v;
+#endif
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	enable-sdio-wakeup;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1 &pinctrl_hog_2 &pinctrl_hog_3 &pinctrl_hog_4 &pinctrl_hog_5>;
+
+	imx7d-aster {
+		pinctrl_aster_spi_gpio: spigpios {
+			fsl,pins = <
+				/* CS1 */
+				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x74 /* SODIMM 65 */
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-aster.dts b/arch/arm/boot/dts/imx7d-colibri-aster.dts
new file mode 100644
index 000000000000..38bb6ca8dbf2
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-aster.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2017 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Colibri Aster Board";
+	compatible = "toradex,colibri_imx7d-aster", "toradex,colibri_imx7d", \
+		     "fsl,imx7d";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-aster.dts b/arch/arm/boot/dts/imx7s-colibri-aster.dts
new file mode 100644
index 000000000000..dbcc11f0d989
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri-aster.dts
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2017 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Colibri Aster Board";
+	compatible = "toradex,colibri_imx7s-aster", "toradex,colibri_imx7s", \
+		     "fsl,imx7s", "fsl,imx7d";
+};