diff options
author | Paul Mackerras <paulus@samba.org> | 2008-04-17 07:45:35 +1000 |
---|---|---|
committer | Paul Mackerras <paulus@samba.org> | 2008-04-17 07:45:35 +1000 |
commit | c7cd5b98072f7e04a50415b9501793bd905ecc16 (patch) | |
tree | 1c0bdbf863dcc4262abebf8dc3a4d7f5218c22b2 | |
parent | e92716f2aa68cdfbf6ec24d6f31f08b072e1a246 (diff) | |
parent | 7132799b0e49c48cf119dbe02d20810860d20991 (diff) |
Merge branch 'for-2.6.26' of master.kernel.org:/pub/scm/linux/kernel/git/olof/pasemi
-rw-r--r-- | arch/powerpc/platforms/pasemi/iommu.c | 19 | ||||
-rw-r--r-- | arch/powerpc/sysdev/mpic.c | 9 | ||||
-rw-r--r-- | drivers/net/pasemi_mac.c | 35 |
3 files changed, 46 insertions, 17 deletions
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index 5803f11c77fc..86967bdd8774 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2005-2007, PA Semi, Inc + * Copyright (C) 2005-2008, PA Semi, Inc * * Maintained by: Olof Johansson <olof@lixom.net> * @@ -27,7 +27,6 @@ #include <asm/abs_addr.h> #include <asm/firmware.h> - #define IOBMAP_PAGE_SHIFT 12 #define IOBMAP_PAGE_SIZE (1 << IOBMAP_PAGE_SHIFT) #define IOBMAP_PAGE_MASK (IOBMAP_PAGE_SIZE - 1) @@ -35,13 +34,13 @@ #define IOB_BASE 0xe0000000 #define IOB_SIZE 0x3000 /* Configuration registers */ -#define IOBCAP_REG 0x10 -#define IOBCOM_REG 0x40 +#define IOBCAP_REG 0x40 +#define IOBCOM_REG 0x100 /* Enable IOB address translation */ #define IOBCOM_ATEN 0x00000100 /* Address decode configuration register */ -#define IOB_AD_REG 0x53 +#define IOB_AD_REG 0x14c /* IOBCOM_AD_REG fields */ #define IOB_AD_VGPRT 0x00000e00 #define IOB_AD_VGAEN 0x00000100 @@ -56,13 +55,13 @@ #define IOB_AD_TRNG_2G 0x00000001 #define IOB_AD_TRNG_128G 0x00000003 -#define IOB_TABLEBASE_REG 0x55 +#define IOB_TABLEBASE_REG 0x154 /* Base of the 64 4-byte L1 registers */ -#define IOB_XLT_L1_REGBASE 0xac0 +#define IOB_XLT_L1_REGBASE 0x2b00 /* Register to invalidate TLB entries */ -#define IOB_AT_INVAL_TLB_REG 0xb40 +#define IOB_AT_INVAL_TLB_REG 0x2d00 /* The top two bits of the level 1 entry contains valid and type flags */ #define IOBMAP_L1E_V 0x40000000 @@ -76,7 +75,7 @@ #define IOBMAP_L2E_V 0x80000000 #define IOBMAP_L2E_V_CACHED 0xc0000000 -static u32 __iomem *iob; +static void __iomem *iob; static u32 iob_l1_emptyval; static u32 iob_l2_emptyval; static u32 *iob_l2_base; @@ -219,7 +218,7 @@ int __init iob_init(struct device_node *dn) for (i = 0; i < 64; i++) { /* Each L1 covers 32MB, i.e. 8K entries = 32K of ram */ regword = IOBMAP_L1E_V | (__pa(iob_l2_base + i*0x2000) >> 12); - out_le32(iob+IOB_XLT_L1_REGBASE+i, regword); + out_le32(iob+IOB_XLT_L1_REGBASE+i*4, regword); } /* set 2GB translation window, based at 0 */ diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 6131fd2b6619..8619f2a3f1f6 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1410,11 +1410,6 @@ void mpic_cpu_set_priority(int prio) mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), prio); } -/* - * XXX: someone who knows mpic should check this. - * do we need to eoi the ipi including for kexec cpu here (see xics comments)? - * or can we reset the mpic in the new kernel? - */ void mpic_teardown_this_cpu(int secondary) { struct mpic *mpic = mpic_primary; @@ -1434,6 +1429,10 @@ void mpic_teardown_this_cpu(int secondary) /* Set current processor priority to max */ mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf); + /* We need to EOI the IPI since not all platforms reset the MPIC + * on boot and new interrupts wouldn't get delivered otherwise. + */ + mpic_eoi(mpic); spin_unlock_irqrestore(&mpic_lock, flags); } diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c index c50f0f4de6d8..965f2e4b3452 100644 --- a/drivers/net/pasemi_mac.c +++ b/drivers/net/pasemi_mac.c @@ -404,6 +404,7 @@ static void pasemi_mac_free_csring(struct pasemi_mac_csring *csring) pasemi_dma_free_flag(csring->events[1]); pasemi_dma_free_ring(&csring->chan); pasemi_dma_free_chan(&csring->chan); + pasemi_dma_free_fun(csring->fun); } static int pasemi_mac_setup_rx_resources(const struct net_device *dev) @@ -1150,7 +1151,10 @@ static int pasemi_mac_open(struct net_device *dev) if (!mac->tx) goto out_tx_ring; - if (dev->mtu > 1500) { + /* We might already have allocated rings in case mtu was changed + * before interface was brought up. + */ + if (dev->mtu > 1500 && !mac->num_cs) { pasemi_mac_setup_csrings(mac); if (!mac->num_cs) goto out_tx_ring; @@ -1388,8 +1392,12 @@ static int pasemi_mac_close(struct net_device *dev) free_irq(mac->tx->chan.irq, mac->tx); free_irq(mac->rx->chan.irq, mac->rx); - for (i = 0; i < mac->num_cs; i++) + for (i = 0; i < mac->num_cs; i++) { pasemi_mac_free_csring(mac->cs[i]); + mac->cs[i] = NULL; + } + + mac->num_cs = 0; /* Free resources */ pasemi_mac_free_rx_resources(mac); @@ -1640,6 +1648,26 @@ static int pasemi_mac_poll(struct napi_struct *napi, int budget) return pkts; } +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void pasemi_mac_netpoll(struct net_device *dev) +{ + const struct pasemi_mac *mac = netdev_priv(dev); + + disable_irq(mac->tx->chan.irq); + pasemi_mac_tx_intr(mac->tx->chan.irq, mac->tx); + enable_irq(mac->tx->chan.irq); + + disable_irq(mac->rx->chan.irq); + pasemi_mac_rx_intr(mac->rx->chan.irq, mac->rx); + enable_irq(mac->rx->chan.irq); +} +#endif + static int pasemi_mac_change_mtu(struct net_device *dev, int new_mtu) { struct pasemi_mac *mac = netdev_priv(dev); @@ -1799,6 +1827,9 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev->mtu = PE_DEF_MTU; /* 1500 MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */ mac->bufsz = dev->mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = pasemi_mac_netpoll; +#endif dev->change_mtu = pasemi_mac_change_mtu; dev->ethtool_ops = &pasemi_mac_ethtool_ops; |