summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid Brownell <david-b@pacbell.net>2006-06-19 14:27:20 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2006-08-02 16:41:41 -0700
commit0365ee0a8f7450c5e79302930d461e58161a96a1 (patch)
tree067ba40e1776b036735e1ac60dfa2a6d27146bc0
parent8b2e76687b39213725207b4a4264e11e8c7b86e6 (diff)
USB: AT91 OHCI updates, mostly power management
OHCI updates for AT91 series processors: - Get ready for at91sam926x processors (ARMv5tej not ARMv4t) - Suspend/resume support now behaves properly - In "standby" mode, OHCI can be a source of system wakeup events (remote wakeup, device connect/disconnect, etc) And minor cleanups. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--drivers/usb/Kconfig2
-rw-r--r--drivers/usb/host/ohci-at91.c88
-rw-r--r--drivers/usb/host/ohci-hcd.c3
3 files changed, 62 insertions, 31 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 2ee742d40c43..005043197527 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -24,7 +24,7 @@ config USB_ARCH_HAS_OHCI
default y if ARCH_S3C2410
default y if PXA27x
default y if ARCH_EP93XX
- default y if ARCH_AT91RM9200
+ default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
# PPC:
default y if STB03xxx
default y if PPC_MPC52xx
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index cdbafb710000..85cc059705a6 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -4,7 +4,7 @@
* Copyright (C) 2004 SAN People (Pty) Ltd.
* Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
*
- * AT91RM9200 Bus Glue
+ * AT91 Bus Glue
*
* Based on fragments of 2.4 driver by Rick Bronson.
* Based on ohci-omap.c
@@ -19,12 +19,13 @@
#include <asm/hardware.h>
#include <asm/arch/board.h>
-#ifndef CONFIG_ARCH_AT91RM9200
-#error "CONFIG_ARCH_AT91RM9200 must be defined."
+#ifndef CONFIG_ARCH_AT91
+#error "CONFIG_ARCH_AT91 must be defined."
#endif
/* interface and function clocks */
static struct clk *iclk, *fclk;
+static int clocked;
extern int usb_disabled(void);
@@ -35,13 +36,14 @@ static void at91_start_hc(struct platform_device *pdev)
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_regs __iomem *regs = hcd->regs;
- dev_dbg(&pdev->dev, "starting AT91RM9200 OHCI USB Controller\n");
+ dev_dbg(&pdev->dev, "start\n");
/*
* Start the USB clocks.
*/
clk_enable(iclk);
clk_enable(fclk);
+ clocked = 1;
/*
* The USB host controller must remain in reset.
@@ -54,7 +56,7 @@ static void at91_stop_hc(struct platform_device *pdev)
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_regs __iomem *regs = hcd->regs;
- dev_dbg(&pdev->dev, "stopping AT91RM9200 OHCI USB Controller\n");
+ dev_dbg(&pdev->dev, "stop\n");
/*
* Put the USB host controller into reset.
@@ -66,6 +68,7 @@ static void at91_stop_hc(struct platform_device *pdev)
*/
clk_disable(fclk);
clk_disable(iclk);
+ clocked = 0;
}
@@ -78,14 +81,15 @@ static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
/**
- * usb_hcd_at91_probe - initialize AT91RM9200-based HCDs
+ * usb_hcd_at91_probe - initialize AT91-based HCDs
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
-int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev)
+static int usb_hcd_at91_probe(const struct hc_driver *driver,
+ struct platform_device *pdev)
{
int retval;
struct usb_hcd *hcd = NULL;
@@ -95,12 +99,13 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *
return -ENODEV;
}
- if ((pdev->resource[0].flags != IORESOURCE_MEM) || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
+ if ((pdev->resource[0].flags != IORESOURCE_MEM)
+ || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
pr_debug("hcd probe: invalid resource type\n");
return -ENODEV;
}
- hcd = usb_create_hcd(driver, &pdev->dev, "at91rm9200");
+ hcd = usb_create_hcd(driver, &pdev->dev, "at91");
if (!hcd)
return -ENOMEM;
hcd->rsrc_start = pdev->resource[0].start;
@@ -149,21 +154,23 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *
/* may be called with controller, bus, and devices active */
/**
- * usb_hcd_at91_remove - shutdown processing for AT91RM9200-based HCDs
+ * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
* @dev: USB Host Controller being removed
* Context: !in_interrupt()
*
* Reverses the effect of usb_hcd_at91_probe(), first invoking
* the HCD's stop() method. It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
+ * context, "rmmod" or something similar.
*
*/
-static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pdev)
+static int usb_hcd_at91_remove(struct usb_hcd *hcd,
+ struct platform_device *pdev)
{
usb_remove_hcd(hcd);
at91_stop_hc(pdev);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ disable_irq_wake(hcd->irq);
clk_put(fclk);
clk_put(iclk);
@@ -178,19 +185,21 @@ static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pde
static int __devinit
ohci_at91_start (struct usb_hcd *hcd)
{
-// struct at91_ohci_data *board = hcd->self.controller->platform_data;
+ struct at91_usbh_data *board = hcd->self.controller->platform_data;
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ struct usb_device *root = hcd->self.root_hub;
int ret;
if ((ret = ohci_init(ohci)) < 0)
return ret;
+ root->maxchild = board->ports;
+
if ((ret = ohci_run(ohci)) < 0) {
err("can't start %s", hcd->self.bus_name);
ohci_stop(hcd);
return ret;
}
-// hcd->self.root_hub->maxchild = board->ports;
return 0;
}
@@ -198,7 +207,7 @@ ohci_at91_start (struct usb_hcd *hcd)
static const struct hc_driver ohci_at91_hc_driver = {
.description = hcd_name,
- .product_desc = "AT91RM9200 OHCI",
+ .product_desc = "AT91 OHCI",
.hcd_priv_size = sizeof(struct ohci_hcd),
/*
@@ -240,33 +249,54 @@ static const struct hc_driver ohci_at91_hc_driver = {
/*-------------------------------------------------------------------------*/
-static int ohci_hcd_at91_drv_probe(struct platform_device *dev)
+static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
- return usb_hcd_at91_probe(&ohci_at91_hc_driver, dev);
+ device_init_wakeup(&pdev->dev, 1);
+ return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
}
-static int ohci_hcd_at91_drv_remove(struct platform_device *dev)
+static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
{
- return usb_hcd_at91_remove(platform_get_drvdata(dev), dev);
+ device_init_wakeup(&pdev->dev, 0);
+ return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
}
#ifdef CONFIG_PM
-/* REVISIT suspend/resume look "too" simple here */
-
static int
-ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg)
+ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
{
- clk_disable(fclk);
- clk_disable(iclk);
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+ if (device_may_wakeup(&pdev->dev))
+ enable_irq_wake(hcd->irq);
+ else
+ disable_irq_wake(hcd->irq);
+
+ /*
+ * The integrated transceivers seem unable to notice disconnect,
+ * reconnect, or wakeup without the 48 MHz clock active. so for
+ * correctness, always discard connection state (using reset).
+ *
+ * REVISIT: some boards will be able to turn VBUS off...
+ */
+ if (at91_suspend_entering_slow_clock()) {
+ ohci_usb_reset (ohci);
+ clk_disable(fclk);
+ clk_disable(iclk);
+ clocked = 0;
+ }
return 0;
}
-static int ohci_hcd_at91_drv_resume(struct platform_device *dev)
+static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
{
- clk_enable(iclk);
- clk_enable(fclk);
+ if (!clocked) {
+ clk_enable(iclk);
+ clk_enable(fclk);
+ }
return 0;
}
@@ -275,7 +305,7 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *dev)
#define ohci_hcd_at91_drv_resume NULL
#endif
-MODULE_ALIAS("at91rm9200-ohci");
+MODULE_ALIAS("at91_ohci");
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
@@ -283,7 +313,7 @@ static struct platform_driver ohci_hcd_at91_driver = {
.suspend = ohci_hcd_at91_drv_suspend,
.resume = ohci_hcd_at91_drv_resume,
.driver = {
- .name = "at91rm9200-ohci",
+ .name = "at91_ohci",
.owner = THIS_MODULE,
},
};
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index afef5ac35b4a..94d8cf4b36c1 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -913,7 +913,7 @@ MODULE_LICENSE ("GPL");
#include "ohci-ppc-soc.c"
#endif
-#ifdef CONFIG_ARCH_AT91RM9200
+#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261)
#include "ohci-at91.c"
#endif
@@ -927,6 +927,7 @@ MODULE_LICENSE ("GPL");
|| defined (CONFIG_SOC_AU1X00) \
|| defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
|| defined (CONFIG_ARCH_AT91RM9200) \
+ || defined (CONFIG_ARCH_AT91SAM9261) \
)
#error "missing bus glue for ohci-hcd"
#endif