[SCSI] fusion - loginfo header update

This header is provided to better understand
loginfo codes returned by the mpt fusion firmware.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

2 files changed, 63 insertions, 46 deletions

diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index 9259d1ad6e6e..a9c14ad132ce 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -3,38 +3,11 @@
  *                                                                         *
  *  Copyright 2003 LSI Logic Corporation.  All rights reserved.            *
  *                                                                         *
- *  This file is confidential and a trade secret of LSI Logic.  The        *
- *  receipt of or possession of this file does not convey any rights to    *
- *  reproduce or disclose its contents or to manufacture, use, or sell     *
- *  anything it may describe, in whole, or in part, without the specific   *
- *  written consent of LSI Logic Corporation.                              *
+ * Description                                                             *
+ * ------------                                                            *
+ * This include file contains SAS firmware interface IOC Log Info codes    *
  *                                                                         *
- ***************************************************************************
- *
- *           Name:  iopiIocLogInfo.h
- *          Title:  SAS Firmware IOP Interface IOC Log Info Definitions
- *     Programmer:  Guy Kendall
- *  Creation Date:  September 24, 2003
- *
- *  Version History
- *  ---------------
- *
- *  Last Updated
- *  -------------
- *  Version         %version: 22 %
- *  Date Updated    %date_modified: %
- *  Programmer      %created_by: nperucca %
- *
- *  Date      Who   Description
- *  --------  ---   -------------------------------------------------------
- *  09/24/03  GWK   Initial version
- *
- *
- * Description
- * ------------
- * This include file contains SAS firmware interface IOC Log Info codes
- *
- *-------------------------------------------------------------------------
+ *-------------------------------------------------------------------------*
  */
 
 #ifndef IOPI_IOCLOGINFO_H_INCLUDED
@@ -57,6 +30,8 @@
 #define IOC_LOGINFO_ORIGINATOR_PL                       (0x01000000)
 #define IOC_LOGINFO_ORIGINATOR_IR                       (0x02000000)
 
+#define IOC_LOGINFO_ORIGINATOR_MASK                     (0x0F000000)
+
 /****************************************************************************/
 /* LOGINFO_CODE defines                                                     */
 /****************************************************************************/
@@ -78,11 +53,27 @@
 #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT    (0x00030700) /* Default Page not found */
 #define IOP_LOGINFO_CODE_TASK_TERMINATED                (0x00050000)
 
+#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R    (0x00060001) /* Read Action not supported for SEP msg */
+#define IOP_LOGINFO_CODE_ENCL_MGMT_INVALID_BUS_ID_ERR0R (0x00060002) /* Invalid Bus/ID in SEP msg */
+
+#define IOP_LOGINFO_CODE_TARGET_ASSIST_TERMINATED       (0x00070001)
+#define IOP_LOGINFO_CODE_TARGET_STATUS_SEND_TERMINATED  (0x00070002)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_ALL_IO       (0x00070003)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO     (0x00070004)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005)
 
 /****************************************************************************/
 /* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL            */
 /****************************************************************************/
 #define PL_LOGINFO_CODE_OPEN_FAILURE                        (0x00010000)
+#define PL_LOG_INFO_CODE_OPEN_FAILURE_NO_DEST_TIME_OUT      (0x00010001)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_BAD_DESTINATION        (0x00010011)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_PROTOCOL_NOT_SUPPORTED (0x00010013)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_STP_RESOURCES_BSY      (0x00010018)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_WRONG_DESTINATION      (0x00010019)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_ORR_TIMEOUT            (0X0001001A)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_PATHWAY_BLOCKED        (0x0001001B)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_AWT_MAXED              (0x0001001C)
 #define PL_LOGINFO_CODE_INVALID_SGL                         (0x00020000)
 #define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH       (0x00030000)
 #define PL_LOGINFO_CODE_FRAME_XFER_ERROR                    (0x00040000)
@@ -97,6 +88,7 @@
 #define PL_LOGINFO_CODE_SATA_LINK_DOWN                      (0x000D0000)
 #define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS           (0x000E0000)
 #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE                 (0x000F0000)
+#define PL_LOGINFO_CODE_CONFIG_PL_NOT_INITIALIZED           (0x000F0001) /* PL not yet initialized, can't do config page req. */
 #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT              (0x000F0100) /* Invalid Page Type */
 #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS        (0x000F0200) /* Invalid Number of Phys */
 #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP         (0x000F0300) /* Case Not Handled */
@@ -105,11 +97,23 @@
 #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY             (0x000F0600) /* Invalid Phy */
 #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER        (0x000F0700) /* No Owner Found */
 #define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT            (0x00100000)
-#define PL_LOGINFO_CODE_RESET                               (0x00110000)
-#define PL_LOGINFO_CODE_ABORT                               (0x00120000)
+#define PL_LOGINFO_CODE_RESET                               (0x00110000) /* See Sub-Codes below */
+#define PL_LOGINFO_CODE_ABORT                               (0x00120000) /* See Sub-Codes below */
 #define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED                 (0x00130000)
 #define PL_LOGINFO_CODE_IO_EXECUTED                         (0x00140000)
+#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER       (0x00150000)
+#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT                    (0x00160000)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAILURE                    (0x00000100)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT    (0x00000101)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT        (0x0000011A) /* Open Reject (Retry) Timeout */
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATHWAY_BLOCKED    (0x0000011B)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_AWT_MAXED          (0x0000011C) /* Arbitration Wait Timer Maxed */
+
+#define PL_LOGINFO_SUB_CODE_TARGET_BUS_RESET                (0x00000120)
+#define PL_LOGINFO_SUB_CODE_TRANSPORT_LAYER                 (0x00000130)  /* Leave lower nibble (1-f) reserved. */
+#define PL_LOGINFO_SUB_CODE_PORT_LAYER                      (0x00000140)  /* Leave lower nibble (1-f) reserved. */
+
+
 #define PL_LOGINFO_SUB_CODE_INVALID_SGL                     (0x00000200)
 #define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH   (0x00000300)
 #define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR                (0x00000400)
@@ -123,26 +127,39 @@
 #define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR       (0x00000C00)
 #define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN                  (0x00000D00)
 #define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS       (0x00000E00)
+#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET      (0x00000E01)
+#define PL_LOGINFO_SUB_CODE_SECOND_OPEN                     (0x00000F00)
 #define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT        (0x00001000)
 
 
 #define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE         (0x00200000) /* Can't get SMP Frame */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR            (0x00200001) /* Error occured on SMP Read */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR           (0x00200002) /* Error occured on SMP Write */
-#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL     (0x00200004) /* Encl Mgmt services not available for this WWID */
-#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED   (0x00200005) /* Address Mode not suppored */
-#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM              (0x00200006) /* Invalid Slot Number in SEP Msg */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT         (0x00200007) /* SGPIO not present/enabled */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR            (0x00200010) /* Error occured on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR           (0x00200020) /* Error occured on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL     (0x00200040) /* Encl Mgmt services not available for this WWID */
+#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED   (0x00200050) /* Address Mode not suppored */
+#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM              (0x00200060) /* Invalid Slot Number in SEP Msg */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT         (0x00200070) /* SGPIO not present/enabled */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_NOT_CONFIGURED       (0x00200080) /* GPIO not configured */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_FRAME_ERROR          (0x00200090) /* GPIO can't allocate a frame */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_CONFIG_PAGE_ERROR    (0x002000A0) /* GPIO failed config page request */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_FRAME_ALLOC_ERROR     (0x002000B0) /* Can't get frame for SES command */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_IO_ERROR              (0x002000C0) /* I/O execution error */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_RETRIES_EXHAUSTED     (0x002000D0) /* SEP I/O retries exhausted */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_ALLOC_ERROR     (0x002000E0) /* Can't get frame for SMP command */
 
 #define PL_LOGINFO_DA_SEP_NOT_PRESENT                       (0x00200100) /* SEP not present when msg received */
 #define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR               (0x00200101) /* Can only accept 1 msg at a time */
 #define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE          (0x00200102) /* ISTWI interrupt recvd. while IDLE */
 #define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE          (0x00200103) /* SEP NACK'd, it is busy */
-#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM             (0x00200104) /* SEP stopped or sent bad chksum in Hdr */
-#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1         (0x00200105) /* SEP returned unknown scsi status */
-#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2         (0x00200106) /* SEP returned unknown scsi status */
-#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP           (0x00200107) /* SEP returned bad chksum after STOP */
-#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA   (0x00200108) /* SEP returned bad chksum after STOP while gettin data*/
+#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK               (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
+#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM             (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
+#define PL_LOGINFO_DA_SEP_STOP_ON_DATA                      (0x00200106) /* SEP stopped while transfering data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA                (0x00200107) /* SEP stopped while transfering sense data */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1         (0x00200108) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2         (0x00200109) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP           (0x0020010A) /* SEP returned bad chksum after STOP */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA   (0x0020010B) /* SEP returned bad chksum after STOP while gettin data*/
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND               (0x0020010C) /* SEP doesn't support CDB opcode */
 
 
 /****************************************************************************/
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index f2721ea30aa7..39c0b16d8d04 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -6138,8 +6138,8 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
 		"Abort",					/* 12h */
 		"IO Not Yet Executed",				/* 13h */
 		"IO Executed",					/* 14h */
-		NULL,						/* 15h */
-		NULL,						/* 16h */
+		"Persistant Reservation Out Not Affiliation Owner", /* 15h */
+		"Open Transmit DMA Abort",			/* 16h */
 		NULL,						/* 17h */
 		NULL,						/* 18h */
 		NULL,						/* 19h */