Merge branch 'net-phy-adin-add-support-for-Analog-Devices-PHYs'

Alexandru Ardelean says:

====================
net: phy: adin: add support for Analog Devices PHYs

This changeset adds support for Analog Devices Industrial Ethernet PHYs.
Particularly the PHYs this driver adds support for:
 * ADIN1200 - Robust, Industrial, Low Power 10/100 Ethernet PHY
 * ADIN1300 - Robust, Industrial, Low Latency 10/100/1000 Gigabit
   Ethernet PHY

The 2 chips are register compatible with one another. The main
difference being that ADIN1200 doesn't operate in gigabit mode.

The chips can be operated by the Generic PHY driver as well via the
standard IEEE PHY registers (0x0000 - 0x000F) which are supported by the
kernel as well. This assumes that configuration of the PHY has been done
completely in HW, according to spec, i.e. no extra SW configuration
required.

This changeset also implements the ability to configure the chips via SW
registers.

Datasheets:
  https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1300.pdf
  https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1200.pdf
====================

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 815 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
new file mode 100644
index 000000000000..69375cb28e92
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIN1200/ADIN1300 PHY
+
+maintainers:
+  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+  Bindings for Analog Devices Industrial Ethernet PHYs
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  adi,rx-internal-delay-ps:
+    description: |
+      RGMII RX Clock Delay used only when PHY operates in RGMII mode with
+      internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
+    enum: [ 1600, 1800, 2000, 2200, 2400 ]
+    default: 2000
+
+  adi,tx-internal-delay-ps:
+    description: |
+      RGMII TX Clock Delay used only when PHY operates in RGMII mode with
+      internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
+    enum: [ 1600, 1800, 2000, 2200, 2400 ]
+    default: 2000
+
+  adi,fifo-depth-bits:
+    description: |
+      When operating in RMII mode, this option configures the FIFO depth.
+    enum: [ 4, 8, 12, 16, 20, 24 ]
+    default: 8
+
+  adi,disable-energy-detect:
+    description: |
+      Disables Energy Detect Powerdown Mode (default disabled, i.e energy detect
+      is enabled if this property is unspecified)
+    type: boolean
+
+examples:
+  - |
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy-mode = "rgmii-id";
+
+        ethernet-phy@0 {
+            reg = <0>;
+
+            adi,rx-internal-delay-ps = <1800>;
+            adi,tx-internal-delay-ps = <2200>;
+        };
+    };
+  - |
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy-mode = "rmii";
+
+        ethernet-phy@1 {
+            reg = <1>;
+
+            adi,fifo-depth-bits = <16>;
+            adi,disable-energy-detect;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index e352550a6895..fd9ab61c2670 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -938,6 +938,14 @@ S:	Supported
 F:	drivers/mux/adgs1408.c
 F:	Documentation/devicetree/bindings/mux/adi,adgs1408.txt
 
+ANALOG DEVICES INC ADIN DRIVER
+M:	Alexandru Ardelean <alexaundru.ardelean@analog.com>
+L:	netdev@vger.kernel.org
+W:	http://ez.analog.com/community/linux-device-drivers
+S:	Supported
+F:	drivers/net/phy/adin.c
+F:	Documentation/devicetree/bindings/net/adi,adin.yaml
+
 ANALOG DEVICES INC ADIS DRIVER LIBRARY
 M:	Alexandru Ardelean <alexandru.ardelean@analog.com>
 S:	Supported
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 48ca213c0ada..03be30cde552 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -257,6 +257,15 @@ config SFP
 	depends on HWMON || HWMON=n
 	select MDIO_I2C
 
+config ADIN_PHY
+	tristate "Analog Devices Industrial Ethernet PHYs"
+	help
+	  Adds support for the Analog Devices Industrial Ethernet PHYs.
+	  Currently supports the:
+	  - ADIN1200 - Robust,Industrial, Low Power 10/100 Ethernet PHY
+	  - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
+	    Ethernet PHY
+
 config AMD_PHY
 	tristate "AMD PHYs"
 	---help---
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index ba07c27e4208..a03437e091f3 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_SFP)		+= sfp.o
 sfp-obj-$(CONFIG_SFP)		+= sfp-bus.o
 obj-y				+= $(sfp-obj-y) $(sfp-obj-m)
 
+obj-$(CONFIG_ADIN_PHY)		+= adin.o
 obj-$(CONFIG_AMD_PHY)		+= amd.o
 aquantia-objs			+= aquantia_main.o
 ifdef CONFIG_HWMON
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
new file mode 100644
index 000000000000..ac79e16cd7f1
--- /dev/null
+++ b/drivers/net/phy/adin.c
@@ -0,0 +1,724 @@
+// SPDX-License-Identifier: GPL-2.0+
+/**
+ *  Driver for Analog Devices Industrial Ethernet PHYs
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/property.h>
+
+#define PHY_ID_ADIN1200				0x0283bc20
+#define PHY_ID_ADIN1300				0x0283bc30
+
+#define ADIN1300_MII_EXT_REG_PTR		0x0010
+#define ADIN1300_MII_EXT_REG_DATA		0x0011
+
+#define ADIN1300_PHY_CTRL1			0x0012
+#define   ADIN1300_AUTO_MDI_EN			BIT(10)
+#define   ADIN1300_MAN_MDIX_EN			BIT(9)
+
+#define ADIN1300_RX_ERR_CNT			0x0014
+
+#define ADIN1300_PHY_CTRL2			0x0016
+#define   ADIN1300_DOWNSPEED_AN_100_EN		BIT(11)
+#define   ADIN1300_DOWNSPEED_AN_10_EN		BIT(10)
+#define   ADIN1300_GROUP_MDIO_EN		BIT(6)
+#define   ADIN1300_DOWNSPEEDS_EN	\
+	(ADIN1300_DOWNSPEED_AN_100_EN | ADIN1300_DOWNSPEED_AN_10_EN)
+
+#define ADIN1300_PHY_CTRL3			0x0017
+#define   ADIN1300_LINKING_EN			BIT(13)
+#define   ADIN1300_DOWNSPEED_RETRIES_MSK	GENMASK(12, 10)
+
+#define ADIN1300_INT_MASK_REG			0x0018
+#define   ADIN1300_INT_MDIO_SYNC_EN		BIT(9)
+#define   ADIN1300_INT_ANEG_STAT_CHNG_EN	BIT(8)
+#define   ADIN1300_INT_ANEG_PAGE_RX_EN		BIT(6)
+#define   ADIN1300_INT_IDLE_ERR_CNT_EN		BIT(5)
+#define   ADIN1300_INT_MAC_FIFO_OU_EN		BIT(4)
+#define   ADIN1300_INT_RX_STAT_CHNG_EN		BIT(3)
+#define   ADIN1300_INT_LINK_STAT_CHNG_EN	BIT(2)
+#define   ADIN1300_INT_SPEED_CHNG_EN		BIT(1)
+#define   ADIN1300_INT_HW_IRQ_EN		BIT(0)
+#define ADIN1300_INT_MASK_EN	\
+	(ADIN1300_INT_LINK_STAT_CHNG_EN | ADIN1300_INT_HW_IRQ_EN)
+#define ADIN1300_INT_STATUS_REG			0x0019
+
+#define ADIN1300_PHY_STATUS1			0x001a
+#define   ADIN1300_PAIR_01_SWAP			BIT(11)
+
+/* EEE register addresses, accessible via Clause 22 access using
+ * ADIN1300_MII_EXT_REG_PTR & ADIN1300_MII_EXT_REG_DATA.
+ * The bit-fields are the same as specified by IEEE for EEE.
+ */
+#define ADIN1300_EEE_CAP_REG			0x8000
+#define ADIN1300_EEE_ADV_REG			0x8001
+#define ADIN1300_EEE_LPABLE_REG			0x8002
+#define ADIN1300_CLOCK_STOP_REG			0x9400
+#define ADIN1300_LPI_WAKE_ERR_CNT_REG		0xa000
+
+#define ADIN1300_GE_SOFT_RESET_REG		0xff0c
+#define   ADIN1300_GE_SOFT_RESET		BIT(0)
+
+#define ADIN1300_GE_RGMII_CFG_REG		0xff23
+#define   ADIN1300_GE_RGMII_RX_MSK		GENMASK(8, 6)
+#define   ADIN1300_GE_RGMII_RX_SEL(x)		\
+		FIELD_PREP(ADIN1300_GE_RGMII_RX_MSK, x)
+#define   ADIN1300_GE_RGMII_GTX_MSK		GENMASK(5, 3)
+#define   ADIN1300_GE_RGMII_GTX_SEL(x)		\
+		FIELD_PREP(ADIN1300_GE_RGMII_GTX_MSK, x)
+#define   ADIN1300_GE_RGMII_RXID_EN		BIT(2)
+#define   ADIN1300_GE_RGMII_TXID_EN		BIT(1)
+#define   ADIN1300_GE_RGMII_EN			BIT(0)
+
+/* RGMII internal delay settings for rx and tx for ADIN1300 */
+#define ADIN1300_RGMII_1_60_NS			0x0001
+#define ADIN1300_RGMII_1_80_NS			0x0002
+#define	ADIN1300_RGMII_2_00_NS			0x0000
+#define	ADIN1300_RGMII_2_20_NS			0x0006
+#define	ADIN1300_RGMII_2_40_NS			0x0007
+
+#define ADIN1300_GE_RMII_CFG_REG		0xff24
+#define   ADIN1300_GE_RMII_FIFO_DEPTH_MSK	GENMASK(6, 4)
+#define   ADIN1300_GE_RMII_FIFO_DEPTH_SEL(x)	\
+		FIELD_PREP(ADIN1300_GE_RMII_FIFO_DEPTH_MSK, x)
+#define   ADIN1300_GE_RMII_EN			BIT(0)
+
+/* RMII fifo depth values */
+#define ADIN1300_RMII_4_BITS			0x0000
+#define ADIN1300_RMII_8_BITS			0x0001
+#define ADIN1300_RMII_12_BITS			0x0002
+#define ADIN1300_RMII_16_BITS			0x0003
+#define ADIN1300_RMII_20_BITS			0x0004
+#define ADIN1300_RMII_24_BITS			0x0005
+
+/**
+ * struct adin_cfg_reg_map - map a config value to aregister value
+ * @cfg		value in device configuration
+ * @reg		value in the register
+ */
+struct adin_cfg_reg_map {
+	int cfg;
+	int reg;
+};
+
+static const struct adin_cfg_reg_map adin_rgmii_delays[] = {
+	{ 1600, ADIN1300_RGMII_1_60_NS },
+	{ 1800, ADIN1300_RGMII_1_80_NS },
+	{ 2000, ADIN1300_RGMII_2_00_NS },
+	{ 2200, ADIN1300_RGMII_2_20_NS },
+	{ 2400, ADIN1300_RGMII_2_40_NS },
+	{ },
+};
+
+static const struct adin_cfg_reg_map adin_rmii_fifo_depths[] = {
+	{ 4,  ADIN1300_RMII_4_BITS },
+	{ 8,  ADIN1300_RMII_8_BITS },
+	{ 12, ADIN1300_RMII_12_BITS },
+	{ 16, ADIN1300_RMII_16_BITS },
+	{ 20, ADIN1300_RMII_20_BITS },
+	{ 24, ADIN1300_RMII_24_BITS },
+	{ },
+};
+
+/**
+ * struct adin_clause45_mmd_map - map to convert Clause 45 regs to Clause 22
+ * @devad		device address used in Clause 45 access
+ * @cl45_regnum		register address defined by Clause 45
+ * @adin_regnum		equivalent register address accessible via Clause 22
+ */
+struct adin_clause45_mmd_map {
+	int devad;
+	u16 cl45_regnum;
+	u16 adin_regnum;
+};
+
+static struct adin_clause45_mmd_map adin_clause45_mmd_map[] = {
+	{ MDIO_MMD_PCS,	MDIO_PCS_EEE_ABLE,	ADIN1300_EEE_CAP_REG },
+	{ MDIO_MMD_AN,	MDIO_AN_EEE_LPABLE,	ADIN1300_EEE_LPABLE_REG },
+	{ MDIO_MMD_AN,	MDIO_AN_EEE_ADV,	ADIN1300_EEE_ADV_REG },
+	{ MDIO_MMD_PCS,	MDIO_CTRL1,		ADIN1300_CLOCK_STOP_REG },
+	{ MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR,	ADIN1300_LPI_WAKE_ERR_CNT_REG },
+};
+
+struct adin_hw_stat {
+	const char *string;
+	u16 reg1;
+	u16 reg2;
+};
+
+static struct adin_hw_stat adin_hw_stats[] = {
+	{ "total_frames_checked_count",		0x940A, 0x940B }, /* hi + lo */
+	{ "length_error_frames_count",		0x940C },
+	{ "alignment_error_frames_count",	0x940D },
+	{ "symbol_error_count",			0x940E },
+	{ "oversized_frames_count",		0x940F },
+	{ "undersized_frames_count",		0x9410 },
+	{ "odd_nibble_frames_count",		0x9411 },
+	{ "odd_preamble_packet_count",		0x9412 },
+	{ "dribble_bits_frames_count",		0x9413 },
+	{ "false_carrier_events_count",		0x9414 },
+};
+
+/**
+ * struct adin_priv - ADIN PHY driver private data
+ * stats		statistic counters for the PHY
+ */
+struct adin_priv {
+	u64			stats[ARRAY_SIZE(adin_hw_stats)];
+};
+
+static int adin_lookup_reg_value(const struct adin_cfg_reg_map *tbl, int cfg)
+{
+	size_t i;
+
+	for (i = 0; tbl[i].cfg; i++) {
+		if (tbl[i].cfg == cfg)
+			return tbl[i].reg;
+	}
+
+	return -EINVAL;
+}
+
+static u32 adin_get_reg_value(struct phy_device *phydev,
+			      const char *prop_name,
+			      const struct adin_cfg_reg_map *tbl,
+			      u32 dflt)
+{
+	struct device *dev = &phydev->mdio.dev;
+	u32 val;
+	int rc;
+
+	if (device_property_read_u32(dev, prop_name, &val))
+		return dflt;
+
+	rc = adin_lookup_reg_value(tbl, val);
+	if (rc < 0) {
+		phydev_warn(phydev,
+			    "Unsupported value %u for %s using default (%u)\n",
+			    val, prop_name, dflt);
+		return dflt;
+	}
+
+	return rc;
+}
+
+static int adin_config_rgmii_mode(struct phy_device *phydev)
+{
+	u32 val;
+	int reg;
+
+	if (!phy_interface_is_rgmii(phydev))
+		return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+					  ADIN1300_GE_RGMII_CFG_REG,
+					  ADIN1300_GE_RGMII_EN);
+
+	reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RGMII_CFG_REG);
+	if (reg < 0)
+		return reg;
+
+	reg |= ADIN1300_GE_RGMII_EN;
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+		reg |= ADIN1300_GE_RGMII_RXID_EN;
+
+		val = adin_get_reg_value(phydev, "adi,rx-internal-delay-ps",
+					 adin_rgmii_delays,
+					 ADIN1300_RGMII_2_00_NS);
+		reg &= ~ADIN1300_GE_RGMII_RX_MSK;
+		reg |= ADIN1300_GE_RGMII_RX_SEL(val);
+	} else {
+		reg &= ~ADIN1300_GE_RGMII_RXID_EN;
+	}
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+		reg |= ADIN1300_GE_RGMII_TXID_EN;
+
+		val = adin_get_reg_value(phydev, "adi,tx-internal-delay-ps",
+					 adin_rgmii_delays,
+					 ADIN1300_RGMII_2_00_NS);
+		reg &= ~ADIN1300_GE_RGMII_GTX_MSK;
+		reg |= ADIN1300_GE_RGMII_GTX_SEL(val);
+	} else {
+		reg &= ~ADIN1300_GE_RGMII_TXID_EN;
+	}
+
+	return phy_write_mmd(phydev, MDIO_MMD_VEND1,
+			     ADIN1300_GE_RGMII_CFG_REG, reg);
+}
+
+static int adin_config_rmii_mode(struct phy_device *phydev)
+{
+	u32 val;
+	int reg;
+
+	if (phydev->interface != PHY_INTERFACE_MODE_RMII)
+		return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+					  ADIN1300_GE_RMII_CFG_REG,
+					  ADIN1300_GE_RMII_EN);
+
+	reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RMII_CFG_REG);
+	if (reg < 0)
+		return reg;
+
+	reg |= ADIN1300_GE_RMII_EN;
+
+	val = adin_get_reg_value(phydev, "adi,fifo-depth-bits",
+				 adin_rmii_fifo_depths,
+				 ADIN1300_RMII_8_BITS);
+
+	reg &= ~ADIN1300_GE_RMII_FIFO_DEPTH_MSK;
+	reg |= ADIN1300_GE_RMII_FIFO_DEPTH_SEL(val);
+
+	return phy_write_mmd(phydev, MDIO_MMD_VEND1,
+			     ADIN1300_GE_RMII_CFG_REG, reg);
+}
+
+static int adin_get_downshift(struct phy_device *phydev, u8 *data)
+{
+	int val, cnt, enable;
+
+	val = phy_read(phydev, ADIN1300_PHY_CTRL2);
+	if (val < 0)
+		return val;
+
+	cnt = phy_read(phydev, ADIN1300_PHY_CTRL3);
+	if (cnt < 0)
+		return cnt;
+
+	enable = FIELD_GET(ADIN1300_DOWNSPEEDS_EN, val);
+	cnt = FIELD_GET(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt);
+
+	*data = (enable && cnt) ? cnt : DOWNSHIFT_DEV_DISABLE;
+
+	return 0;
+}
+
+static int adin_set_downshift(struct phy_device *phydev, u8 cnt)
+{
+	u16 val;
+	int rc;
+
+	if (cnt == DOWNSHIFT_DEV_DISABLE)
+		return phy_clear_bits(phydev, ADIN1300_PHY_CTRL2,
+				      ADIN1300_DOWNSPEEDS_EN);
+
+	if (cnt > 7)
+		return -E2BIG;
+
+	val = FIELD_PREP(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt);
+	val |= ADIN1300_LINKING_EN;
+
+	rc = phy_modify(phydev, ADIN1300_PHY_CTRL3,
+			ADIN1300_LINKING_EN | ADIN1300_DOWNSPEED_RETRIES_MSK,
+			val);
+	if (rc < 0)
+		return rc;
+
+	return phy_set_bits(phydev, ADIN1300_PHY_CTRL2,
+			    ADIN1300_DOWNSPEEDS_EN);
+}
+
+static int adin_get_tunable(struct phy_device *phydev,
+			    struct ethtool_tunable *tuna, void *data)
+{
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		return adin_get_downshift(phydev, data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int adin_set_tunable(struct phy_device *phydev,
+			    struct ethtool_tunable *tuna, const void *data)
+{
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		return adin_set_downshift(phydev, *(const u8 *)data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int adin_config_init(struct phy_device *phydev)
+{
+	int rc;
+
+	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+
+	rc = genphy_config_init(phydev);
+	if (rc < 0)
+		return rc;
+
+	rc = adin_config_rgmii_mode(phydev);
+	if (rc < 0)
+		return rc;
+
+	rc = adin_config_rmii_mode(phydev);
+	if (rc < 0)
+		return rc;
+
+	rc = adin_set_downshift(phydev, 4);
+	if (rc < 0)
+		return rc;
+
+	phydev_dbg(phydev, "PHY is using mode '%s'\n",
+		   phy_modes(phydev->interface));
+
+	return 0;
+}
+
+static int adin_phy_ack_intr(struct phy_device *phydev)
+{
+	/* Clear pending interrupts */
+	int rc = phy_read(phydev, ADIN1300_INT_STATUS_REG);
+
+	return rc < 0 ? rc : 0;
+}
+
+static int adin_phy_config_intr(struct phy_device *phydev)
+{
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		return phy_set_bits(phydev, ADIN1300_INT_MASK_REG,
+				    ADIN1300_INT_MASK_EN);
+
+	return phy_clear_bits(phydev, ADIN1300_INT_MASK_REG,
+			      ADIN1300_INT_MASK_EN);
+}
+
+static int adin_cl45_to_adin_reg(struct phy_device *phydev, int devad,
+				 u16 cl45_regnum)
+{
+	struct adin_clause45_mmd_map *m;
+	int i;
+
+	if (devad == MDIO_MMD_VEND1)
+		return cl45_regnum;
+
+	for (i = 0; i < ARRAY_SIZE(adin_clause45_mmd_map); i++) {
+		m = &adin_clause45_mmd_map[i];
+		if (m->devad == devad && m->cl45_regnum == cl45_regnum)
+			return m->adin_regnum;
+	}
+
+	phydev_err(phydev,
+		   "No translation available for devad: %d reg: %04x\n",
+		   devad, cl45_regnum);
+
+	return -EINVAL;
+}
+
+static int adin_read_mmd(struct phy_device *phydev, int devad, u16 regnum)
+{
+	struct mii_bus *bus = phydev->mdio.bus;
+	int phy_addr = phydev->mdio.addr;
+	int adin_regnum;
+	int err;
+
+	adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum);
+	if (adin_regnum < 0)
+		return adin_regnum;
+
+	err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR,
+			      adin_regnum);
+	if (err)
+		return err;
+
+	return __mdiobus_read(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA);
+}
+
+static int adin_write_mmd(struct phy_device *phydev, int devad, u16 regnum,
+			  u16 val)
+{
+	struct mii_bus *bus = phydev->mdio.bus;
+	int phy_addr = phydev->mdio.addr;
+	int adin_regnum;
+	int err;
+
+	adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum);
+	if (adin_regnum < 0)
+		return adin_regnum;
+
+	err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR,
+			      adin_regnum);
+	if (err)
+		return err;
+
+	return __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA, val);
+}
+
+static int adin_config_mdix(struct phy_device *phydev)
+{
+	bool auto_en, mdix_en;
+	int reg;
+
+	mdix_en = false;
+	auto_en = false;
+	switch (phydev->mdix_ctrl) {
+	case ETH_TP_MDI:
+		break;
+	case ETH_TP_MDI_X:
+		mdix_en = true;
+		break;
+	case ETH_TP_MDI_AUTO:
+		auto_en = true;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	reg = phy_read(phydev, ADIN1300_PHY_CTRL1);
+	if (reg < 0)
+		return reg;
+
+	if (mdix_en)
+		reg |= ADIN1300_MAN_MDIX_EN;
+	else
+		reg &= ~ADIN1300_MAN_MDIX_EN;
+
+	if (auto_en)
+		reg |= ADIN1300_AUTO_MDI_EN;
+	else
+		reg &= ~ADIN1300_AUTO_MDI_EN;
+
+	return phy_write(phydev, ADIN1300_PHY_CTRL1, reg);
+}
+
+static int adin_config_aneg(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = adin_config_mdix(phydev);
+	if (ret)
+		return ret;
+
+	return genphy_config_aneg(phydev);
+}
+
+static int adin_mdix_update(struct phy_device *phydev)
+{
+	bool auto_en, mdix_en;
+	bool swapped;
+	int reg;
+
+	reg = phy_read(phydev, ADIN1300_PHY_CTRL1);
+	if (reg < 0)
+		return reg;
+
+	auto_en = !!(reg & ADIN1300_AUTO_MDI_EN);
+	mdix_en = !!(reg & ADIN1300_MAN_MDIX_EN);
+
+	/* If MDI/MDIX is forced, just read it from the control reg */
+	if (!auto_en) {
+		if (mdix_en)
+			phydev->mdix = ETH_TP_MDI_X;
+		else
+			phydev->mdix = ETH_TP_MDI;
+		return 0;
+	}
+
+	/**
+	 * Otherwise, we need to deduce it from the PHY status2 reg.
+	 * When Auto-MDI is enabled, the ADIN1300_MAN_MDIX_EN bit implies
+	 * a preference for MDIX when it is set.
+	 */
+	reg = phy_read(phydev, ADIN1300_PHY_STATUS1);
+	if (reg < 0)
+		return reg;
+
+	swapped = !!(reg & ADIN1300_PAIR_01_SWAP);
+
+	if (mdix_en != swapped)
+		phydev->mdix = ETH_TP_MDI_X;
+	else
+		phydev->mdix = ETH_TP_MDI;
+
+	return 0;
+}
+
+static int adin_read_status(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = adin_mdix_update(phydev);
+	if (ret < 0)
+		return ret;
+
+	return genphy_read_status(phydev);
+}
+
+static int adin_soft_reset(struct phy_device *phydev)
+{
+	int rc;
+
+	/* The reset bit is self-clearing, set it and wait */
+	rc = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+			      ADIN1300_GE_SOFT_RESET_REG,
+			      ADIN1300_GE_SOFT_RESET);
+	if (rc < 0)
+		return rc;
+
+	msleep(10);
+
+	/* If we get a read error something may be wrong */
+	rc = phy_read_mmd(phydev, MDIO_MMD_VEND1,
+			  ADIN1300_GE_SOFT_RESET_REG);
+
+	return rc < 0 ? rc : 0;
+}
+
+static int adin_get_sset_count(struct phy_device *phydev)
+{
+	return ARRAY_SIZE(adin_hw_stats);
+}
+
+static void adin_get_strings(struct phy_device *phydev, u8 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++) {
+		strlcpy(&data[i * ETH_GSTRING_LEN],
+			adin_hw_stats[i].string, ETH_GSTRING_LEN);
+	}
+}
+
+static int adin_read_mmd_stat_regs(struct phy_device *phydev,
+				   struct adin_hw_stat *stat,
+				   u32 *val)
+{
+	int ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg1);
+	if (ret < 0)
+		return ret;
+
+	*val = (ret & 0xffff);
+
+	if (stat->reg2 == 0)
+		return 0;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg2);
+	if (ret < 0)
+		return ret;
+
+	*val <<= 16;
+	*val |= (ret & 0xffff);
+
+	return 0;
+}
+
+static u64 adin_get_stat(struct phy_device *phydev, int i)
+{
+	struct adin_hw_stat *stat = &adin_hw_stats[i];
+	struct adin_priv *priv = phydev->priv;
+	u32 val;
+	int ret;
+
+	if (stat->reg1 > 0x1f) {
+		ret = adin_read_mmd_stat_regs(phydev, stat, &val);
+		if (ret < 0)
+			return (u64)(~0);
+	} else {
+		ret = phy_read(phydev, stat->reg1);
+		if (ret < 0)
+			return (u64)(~0);
+		val = (ret & 0xffff);
+	}
+
+	priv->stats[i] += val;
+
+	return priv->stats[i];
+}
+
+static void adin_get_stats(struct phy_device *phydev,
+			   struct ethtool_stats *stats, u64 *data)
+{
+	int i, rc;
+
+	/* latch copies of all the frame-checker counters */
+	rc = phy_read(phydev, ADIN1300_RX_ERR_CNT);
+	if (rc < 0)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++)
+		data[i] = adin_get_stat(phydev, i);
+}
+
+static int adin_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct adin_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
+static struct phy_driver adin_driver[] = {
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200),
+		.name		= "ADIN1200",
+		.probe		= adin_probe,
+		.config_init	= adin_config_init,
+		.soft_reset	= adin_soft_reset,
+		.config_aneg	= adin_config_aneg,
+		.read_status	= adin_read_status,
+		.get_tunable	= adin_get_tunable,
+		.set_tunable	= adin_set_tunable,
+		.ack_interrupt	= adin_phy_ack_intr,
+		.config_intr	= adin_phy_config_intr,
+		.get_sset_count	= adin_get_sset_count,
+		.get_strings	= adin_get_strings,
+		.get_stats	= adin_get_stats,
+		.resume		= genphy_resume,
+		.suspend	= genphy_suspend,
+		.read_mmd	= adin_read_mmd,
+		.write_mmd	= adin_write_mmd,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300),
+		.name		= "ADIN1300",
+		.probe		= adin_probe,
+		.config_init	= adin_config_init,
+		.soft_reset	= adin_soft_reset,
+		.config_aneg	= adin_config_aneg,
+		.read_status	= adin_read_status,
+		.get_tunable	= adin_get_tunable,
+		.set_tunable	= adin_set_tunable,
+		.ack_interrupt	= adin_phy_ack_intr,
+		.config_intr	= adin_phy_config_intr,
+		.get_sset_count	= adin_get_sset_count,
+		.get_strings	= adin_get_strings,
+		.get_stats	= adin_get_stats,
+		.resume		= genphy_resume,
+		.suspend	= genphy_suspend,
+		.read_mmd	= adin_read_mmd,
+		.write_mmd	= adin_write_mmd,
+	},
+};
+
+module_phy_driver(adin_driver);
+
+static struct mdio_device_id __maybe_unused adin_tbl[] = {
+	{ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, adin_tbl);
+MODULE_DESCRIPTION("Analog Devices Industrial Ethernet PHY driver");
+MODULE_LICENSE("GPL");