diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-12 13:23:51 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-12 13:23:51 -0700 |
| commit | 19785cf93b6c4252981894394f2dbd35c5e5d1ec (patch) | |
| tree | 837d86ff16a56bd681974f933813937985225277 | |
| parent | 98db5e5503c21c27705c49ebda782b4252b5f7a7 (diff) | |
| parent | 6d7c70d1cd6526dc79e3d3b3faae1c40c1681168 (diff) | |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal SoC updates from Zhang Rui:
"Thermal SoC management updates:
- imx thermal driver now supports i.MX7 thermal sensor (Anson Huang)
- exynos thermal driver dropped support for exynos 5440 (Krzysztof
Kozlowski)
- rcar_thermal now supports r8a77995 (Yoshihiro Kaneko)
- rcar_gen3_thermal now supports r8a77965 (Niklas Söderlund)
- qcom-spmi-temp-alarm now supports GEN2 PMIC peripherals (David
Collins)
- uniphier thermal now supports UniPhier PXs3 (Kunihiko Hayashi)
- mediatek thermal now supports MT7622 SoC (Sean Wang)
- considerable refactoring of exynos driver (Bartlomiej
Zolnierkiewicz)
- small fixes all over the place on different drivers"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (50 commits)
thermal: qcom: tsens: Allow number of sensors to come from DT
thermal: tegra: soctherm: add const to struct thermal_cooling_device_ops
thermal: exynos: Reduce severity of too early temperature read
thermal: imx: Switch to SPDX identifier
thermal: qcom-spmi-temp-alarm: add support for GEN2 PMIC peripherals
thermal: ti-soc-thermal: fix incorrect entry in omap5430_adc_to_temp[]
thermal: rcar_thermal: add r8a77995 support
dt-bindings: thermal: rcar-thermal: add R8A77995 support
thermal: mediatek: use of_device_get_match_data()
thermal: exynos: remove trip reporting to user-space
thermal: exynos: remove unused defines for Exynos5433
thermal: exynos: cleanup code for enabling threshold interrupts
thermal: exynos: check return values of ->get_trip_[temp, hyst] methods
thermal: exynos: move trips setting to exynos_tmu_initialize()
thermal: exynos: set trips in ascending order in exynos7_tmu_initialize()
thermal: exynos: do not use trips structure directly in ->tmu_initialize
thermal: exynos: add exynos*_tmu_set_[trip,hyst]() helpers
thermal: exynos: move IRQs clearing to exynos_tmu_initialize()
thermal: exynos: clear IRQs later in exynos4412_tmu_initialize()
thermal: exynos: make ->tmu_initialize method void
...
18 files changed, 851 insertions, 881 deletions
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index b957acff57aa..ad648d93d961 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -12,7 +12,6 @@ "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4 Exynos5420 (Must pass triminfo base and triminfo clock) "samsung,exynos5433-tmu" - "samsung,exynos5440-tmu" "samsung,exynos7-tmu" - interrupt-parent : The phandle for the interrupt controller - reg : Address range of the thermal registers. For soc's which has multiple @@ -68,18 +67,7 @@ Example 1): #thermal-sensor-cells = <0>; }; -Example 2): - - tmuctrl_0: tmuctrl@160118 { - compatible = "samsung,exynos5440-tmu"; - reg = <0x160118 0x230>, <0x160368 0x10>; - interrupts = <0 58 0>; - clocks = <&clock 21>; - clock-names = "tmu_apbif"; - #thermal-sensor-cells = <0>; - }; - -Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") +Example 2): (In case of Exynos5420 "with misplaced TRIMINFO register") tmu_cpu2: tmu@10068000 { compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x10068000 0x100>, <0x1006c000 0x4>; diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt index 379eb763073e..823e4176eef8 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt @@ -1,8 +1,13 @@ * Temperature Monitor (TEMPMON) on Freescale i.MX SoCs Required properties: -- compatible : "fsl,imx6q-tempmon" for i.MX6Q, "fsl,imx6sx-tempmon" for i.MX6SX. - i.MX6SX has two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC, +- compatible : must be one of following: + - "fsl,imx6q-tempmon" for i.MX6Q, + - "fsl,imx6sx-tempmon" for i.MX6SX, + - "fsl,imx7d-tempmon" for i.MX7S/D. +- interrupts : the interrupt output of the controller: + i.MX6Q has one IRQ which will be triggered when temperature is higher than high threshold, + i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC, when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature is higher than panic threshold, system will auto reboot by SRC module. - fsl,tempmon : phandle pointer to system controller that contains TEMPMON diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt index 0d73ea5e9c0c..41d6a443ad66 100644 --- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt @@ -12,6 +12,7 @@ Required properties: - "mediatek,mt8173-thermal" : For MT8173 family of SoCs - "mediatek,mt2701-thermal" : For MT2701 family of SoCs - "mediatek,mt2712-thermal" : For MT2712 family of SoCs + - "mediatek,mt7622-thermal" : For MT7622 SoC - reg: Address range of the thermal controller - interrupts: IRQ for the thermal controller - clocks, clock-names: Clocks needed for the thermal controller. required diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt index 292ed89d900b..06195e8f35e2 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt @@ -8,6 +8,7 @@ Required properties: - reg: Address range of the thermal registers - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. +- #qcom,sensors: Number of sensors in tsens block - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify nvmem cells diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt index 39e7d4e61a63..cfa154bb0fa7 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt @@ -9,6 +9,7 @@ Required properties: Examples with soctypes are: - "renesas,r8a7795-thermal" (R-Car H3) - "renesas,r8a7796-thermal" (R-Car M3-W) + - "renesas,r8a77965-thermal" (R-Car M3-N) - reg : Address ranges of the thermal registers. Each sensor needs one address range. Sorting must be done in increasing order according to datasheet, i.e. @@ -18,7 +19,7 @@ Required properties: Optional properties: -- interrupts : interrupts routed to the TSC (3 for H3 and M3-W) +- interrupts : interrupts routed to the TSC (3 for H3, M3-W and M3-N) - power-domain : Must contain a reference to the power domain. This property is mandatory if the thermal sensor instance is part of a controllable power domain. diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt index 349e635f2d87..67c563f1b4c4 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt @@ -3,7 +3,8 @@ Required properties: - compatible : "renesas,thermal-<soctype>", "renesas,rcar-gen2-thermal" (with thermal-zone) or - "renesas,rcar-thermal" (without thermal-zone) as fallback. + "renesas,rcar-thermal" (without thermal-zone) as + fallback except R-Car D3. Examples with soctypes are: - "renesas,thermal-r8a73a4" (R-Mobile APE6) - "renesas,thermal-r8a7743" (RZ/G1M) @@ -12,13 +13,15 @@ Required properties: - "renesas,thermal-r8a7791" (R-Car M2-W) - "renesas,thermal-r8a7792" (R-Car V2H) - "renesas,thermal-r8a7793" (R-Car M2-N) + - "renesas,thermal-r8a77995" (R-Car D3) - reg : Address range of the thermal registers. The 1st reg will be recognized as common register if it has "interrupts". Option properties: -- interrupts : use interrupt +- interrupts : If present should contain 3 interrupts for + R-Car D3 or 1 interrupt otherwise. Example (non interrupt support): diff --git a/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt b/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt index 686c0b42ed3f..ceb92a95727a 100644 --- a/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt @@ -8,6 +8,7 @@ Required properties: - compatible : - "socionext,uniphier-pxs2-thermal" : For UniPhier PXs2 SoC - "socionext,uniphier-ld20-thermal" : For UniPhier LD20 SoC + - "socionext,uniphier-pxs3-thermal" : For UniPhier PXs3 SoC - interrupts : IRQ for the temperature alarm - #thermal-sensor-cells : Should be 0. See ./thermal.txt for details. diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index ee3a215b333a..334d98be03b9 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -1,11 +1,6 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2013 Freescale Semiconductor, Inc. #include <linux/clk.h> #include <linux/cpufreq.h> @@ -31,35 +26,57 @@ #define REG_CLR 0x8 #define REG_TOG 0xc -#define MISC0 0x0150 -#define MISC0_REFTOP_SELBIASOFF (1 << 3) -#define MISC1 0x0160 -#define MISC1_IRQ_TEMPHIGH (1 << 29) +/* i.MX6 specific */ +#define IMX6_MISC0 0x0150 +#define IMX6_MISC0_REFTOP_SELBIASOFF (1 << 3) +#define IMX6_MISC1 0x0160 +#define IMX6_MISC1_IRQ_TEMPHIGH (1 << 29) /* Below LOW and PANIC bits are only for TEMPMON_IMX6SX */ -#define MISC1_IRQ_TEMPLOW (1 << 28) -#define MISC1_IRQ_TEMPPANIC (1 << 27) - -#define TEMPSENSE0 0x0180 -#define TEMPSENSE0_ALARM_VALUE_SHIFT 20 -#define TEMPSENSE0_ALARM_VALUE_MASK (0xfff << TEMPSENSE0_ALARM_VALUE_SHIFT) -#define TEMPSENSE0_TEMP_CNT_SHIFT 8 -#define TEMPSENSE0_TEMP_CNT_MASK (0xfff << TEMPSENSE0_TEMP_CNT_SHIFT) -#define TEMPSENSE0_FINISHED (1 << 2) -#define TEMPSENSE0_MEASURE_TEMP (1 << 1) -#define TEMPSENSE0_POWER_DOWN (1 << 0) - -#define TEMPSENSE1 0x0190 -#define TEMPSENSE1_MEASURE_FREQ 0xffff -/* Below TEMPSENSE2 is only for TEMPMON_IMX6SX */ -#define TEMPSENSE2 0x0290 -#define TEMPSENSE2_LOW_VALUE_SHIFT 0 -#define TEMPSENSE2_LOW_VALUE_MASK 0xfff -#define TEMPSENSE2_PANIC_VALUE_SHIFT 16 -#define TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000 +#define IMX6_MISC1_IRQ_TEMPLOW (1 << 28) +#define IMX6_MISC1_IRQ_TEMPPANIC (1 << 27) + +#define IMX6_TEMPSENSE0 0x0180 +#define IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT 20 +#define IMX6_TEMPSENSE0_ALARM_VALUE_MASK (0xfff << 20) +#define IMX6_TEMPSENSE0_TEMP_CNT_SHIFT 8 +#define IMX6_TEMPSENSE0_TEMP_CNT_MASK (0xfff << 8) +#define IMX6_TEMPSENSE0_FINISHED (1 << 2) +#define IMX6_TEMPSENSE0_MEASURE_TEMP (1 << 1) +#define IMX6_TEMPSENSE0_POWER_DOWN (1 << 0) + +#define IMX6_TEMPSENSE1 0x0190 +#define IMX6_TEMPSENSE1_MEASURE_FREQ 0xffff +#define IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT 0 #define OCOTP_MEM0 0x0480 #define OCOTP_ANA1 0x04e0 +/* Below TEMPSENSE2 is only for TEMPMON_IMX6SX */ +#define IMX6_TEMPSENSE2 0x0290 +#define IMX6_TEMPSENSE2_LOW_VALUE_SHIFT 0 +#define IMX6_TEMPSENSE2_LOW_VALUE_MASK 0xfff +#define IMX6_TEMPSENSE2_PANIC_VALUE_SHIFT 16 +#define IMX6_TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000 + +/* i.MX7 specific */ +#define IMX7_ANADIG_DIGPROG 0x800 +#define IMX7_TEMPSENSE0 0x300 +#define IMX7_TEMPSENSE0_PANIC_ALARM_SHIFT 18 +#define IMX7_TEMPSENSE0_PANIC_ALARM_MASK (0x1ff << 18) +#define IMX7_TEMPSENSE0_HIGH_ALARM_SHIFT 9 +#define IMX7_TEMPSENSE0_HIGH_ALARM_MASK (0x1ff << 9) +#define IMX7_TEMPSENSE0_LOW_ALARM_SHIFT 0 +#define IMX7_TEMPSENSE0_LOW_ALARM_MASK 0x1ff + +#define IMX7_TEMPSENSE1 0x310 +#define IMX7_TEMPSENSE1_MEASURE_FREQ_SHIFT 16 +#define IMX7_TEMPSENSE1_MEASURE_FREQ_MASK (0xffff << 16) +#define IMX7_TEMPSENSE1_FINISHED (1 << 11) +#define IMX7_TEMPSENSE1_MEASURE_TEMP (1 << 10) +#define IMX7_TEMPSENSE1_POWER_DOWN (1 << 9) +#define IMX7_TEMPSENSE1_TEMP_VALUE_SHIFT 0 +#define IMX7_TEMPSENSE1_TEMP_VALUE_MASK 0x1ff + /* The driver supports 1 passive trip point and 1 critical trip point */ enum imx_thermal_trip { IMX_TRIP_PASSIVE, @@ -72,17 +89,114 @@ enum imx_thermal_trip { #define TEMPMON_IMX6Q 1 #define TEMPMON_IMX6SX 2 +#define TEMPMON_IMX7D 3 struct thermal_soc_data { u32 version; + + u32 sensor_ctrl; + u32 power_down_mask; + u32 measure_temp_mask; + + u32 measure_freq_ctrl; + u32 measure_freq_mask; + u32 measure_freq_shift; + + u32 temp_data; + u32 temp_value_mask; + u32 temp_value_shift; + u32 temp_valid_mask; + + u32 panic_alarm_ctrl; + u32 panic_alarm_mask; + u32 panic_alarm_shift; + + u32 high_alarm_ctrl; + u32 high_alarm_mask; + u32 high_alarm_shift; + + u32 low_alarm_ctrl; + u32 low_alarm_mask; + u32 low_alarm_shift; }; static struct thermal_soc_data thermal_imx6q_data = { .version = TEMPMON_IMX6Q, + + .sensor_ctrl = IMX6_TEMPSENSE0, + .power_down_mask = IMX6_TEMPSENSE0_POWER_DOWN, + .measure_temp_mask = IMX6_TEMPSENSE0_MEASURE_TEMP, + + .measure_freq_ctrl = IMX6_TEMPSENSE1, + .measure_freq_shift = IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT, + .measure_freq_mask = IMX6_TEMPSENSE1_MEASURE_FREQ, + + .temp_data = IMX6_TEMPSENSE0, + .temp_value_mask = IMX6_TEMPSENSE0_TEMP_CNT_MASK, + .temp_value_shift = IMX6_TEMPSENSE0_TEMP_CNT_SHIFT, + .temp_valid_mask = IMX6_TEMPSENSE0_FINISHED, + + .high_alarm_ctrl = IMX6_TEMPSENSE0, + .high_alarm_mask = IMX6_TEMPSENSE0_ALARM_VALUE_MASK, + .high_alarm_shift = IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT, }; static struct thermal_soc_data thermal_imx6sx_data = { .version = TEMPMON_IMX6SX, + + .sensor_ctrl = IMX6_TEMPSENSE0, + .power_down_mask = IMX6_TEMPSENSE0_POWER_DOWN, + .measure_temp_mask = IMX6_TEMPSENSE0_MEASURE_TEMP, + + .measure_freq_ctrl = IMX6_TEMPSENSE1, + .measure_freq_shift = IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT, + .measure_freq_mask = IMX6_TEMPSENSE1_MEASURE_FREQ, + + .temp_data = IMX6_TEMPSENSE0, + .temp_value_mask = IMX6_TEMPSENSE0_TEMP_CNT_MASK, + .temp_value_shift = IMX6_TEMPSENSE0_TEMP_CNT_SHIFT, + .temp_valid_mask = IMX6_TEMPSENSE0_FINISHED, + + .high_alarm_ctrl = IMX6_TEMPSENSE0, + .high_alarm_mask = IMX6_TEMPSENSE0_ALARM_VALUE_MASK, + .high_alarm_shift = IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT, + + .panic_alarm_ctrl = IMX6_TEMPSENSE2, + .panic_alarm_mask = IMX6_TEMPSENSE2_PANIC_VALUE_MASK, + .panic_alarm_shift = IMX6_TEMPSENSE2_PANIC_VALUE_SHIFT, + + .low_alarm_ctrl = IMX6_TEMPSENSE2, + .low_alarm_mask = IMX6_TEMPSENSE2_LOW_VALUE_MASK, + .low_alarm_shift = IMX6_TEMPSENSE2_LOW_VALUE_SHIFT, +}; + +static struct thermal_soc_data thermal_imx7d_data = { + .version = TEMPMON_IMX7D, + + .sensor_ctrl = IMX7_TEMPSENSE1, + .power_down_mask = IMX7_TEMPSENSE1_POWER_DOWN, + .measure_temp_mask = IMX7_TEMPSENSE1_MEASURE_TEMP, + + .measure_freq_ctrl = IMX7_TEMPSENSE1, + .measure_freq_shift = IMX7_TEMPSENSE1_MEASURE_FREQ_SHIFT, + .measure_freq_mask = IMX7_TEMPSENSE1_MEASURE_FREQ_MASK, + + .temp_data = IMX7_TEMPSENSE1, + .temp_value_mask = IMX7_TEMPSENSE1_TEMP_VALUE_MASK, + .temp_value_shift = IMX7_TEMPSENSE1_TEMP_VALUE_SHIFT, + .temp_valid_mask = IMX7_TEMPSENSE1_FINISHED, + + .panic_alarm_ctrl = IMX7_TEMPSENSE1, + .panic_alarm_mask = IMX7_TEMPSENSE0_PANIC_ALARM_MASK, + .panic_alarm_shift = IMX7_TEMPSENSE0_PANIC_ALARM_SHIFT, + + .high_alarm_ctrl = IMX7_TEMPSENSE0, + .high_alarm_mask = IMX7_TEMPSENSE0_HIGH_ALARM_MASK, + .high_alarm_shift = IMX7_TEMPSENSE0_HIGH_ALARM_SHIFT, + + .low_alarm_ctrl = IMX7_TEMPSENSE0, + .low_alarm_mask = IMX7_TEMPSENSE0_LOW_ALARM_MASK, + .low_alarm_shift = IMX7_TEMPSENSE0_LOW_ALARM_SHIFT, }; struct imx_thermal_data { @@ -107,31 +221,42 @@ struct imx_thermal_data { static void imx_set_panic_temp(struct imx_thermal_data *data, int panic_temp) { + const struct thermal_soc_data *soc_data = data->socdata; struct regmap *map = data->tempmon; int critical_value; critical_value = (data->c2 - panic_temp) / data->c1; - regmap_write(map, TEMPSENSE2 + REG_CLR, TEMPSENSE2_PANIC_VALUE_MASK); - regmap_write(map, TEMPSENSE2 + REG_SET, critical_value << - TEMPSENSE2_PANIC_VALUE_SHIFT); + + regmap_write(map, soc_data->panic_alarm_ctrl + REG_CLR, + soc_data->panic_alarm_mask); + regmap_write(map, soc_data->panic_alarm_ctrl + REG_SET, + critical_value << soc_data->panic_alarm_shift); } static void imx_set_alarm_temp(struct imx_thermal_data *data, int alarm_temp) { struct regmap *map = data->tempmon; + const struct thermal_soc_data *soc_data = data->socdata; int alarm_value; data->alarm_temp = alarm_temp; - alarm_value = (data->c2 - alarm_temp) / data->c1; - regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_ALARM_VALUE_MASK); - regmap_write(map, TEMPSENSE0 + REG_SET, alarm_value << - TEMPSENSE0_ALARM_VALUE_SHIFT); + + if (data->socdata->version == TEMPMON_IMX7D) + alarm_value = alarm_temp / 1000 + data->c1 - 25; + else + alarm_value = (data->c2 - alarm_temp) / data->c1; + + regmap_write(map, soc_data->high_alarm_ctrl + REG_CLR, + soc_data->high_alarm_mask); + regmap_write(map, soc_data->high_alarm_ctrl + REG_SET, + alarm_value << soc_data->high_alarm_shift); } static int imx_get_temp(struct thermal_zone_device *tz, int *temp) { struct imx_thermal_data *data = tz->devdata; + const struct thermal_soc_data *soc_data = data->socdata; struct regmap *map = data->tempmon; unsigned int n_meas; bool wait; @@ -139,16 +264,18 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp) if (data->mode == THERMAL_DEVICE_ENABLED) { /* Check if a measurement is currently in progress */ - regmap_read(map, TEMPSENSE0, &val); - wait = !(val & TEMPSENSE0_FINISHED); + regmap_read(map, soc_data->temp_data, &val); + wait = !(val & soc_data->temp_valid_mask); } else { /* * Every time we measure the temperature, we will power on the * temperature sensor, enable measurements, take a reading, * disable measurements, power off the temperature sensor. */ - regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); - regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); + regmap_write(map, soc_data->sensor_ctrl + REG_CLR, + soc_data->power_down_mask); + regmap_write(map, soc_data->sensor_ctrl + REG_SET, + soc_data->measure_temp_mask); wait = true; } @@ -160,22 +287,28 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp) if (wait) usleep_range(20, 50); - regmap_read(map, TEMPSENSE0, &val); + regmap_read(map, soc_data->temp_data, &val); if (data->mode != THERMAL_DEVICE_ENABLED) { - regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); - regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); + regmap_write(map, soc_data->sensor_ctrl + REG_CLR, + soc_data->measure_temp_mask); + regmap_write(map, soc_data->sensor_ctrl + REG_SET, + soc_data->power_down_mask); } - if ((val & TEMPSENSE0_FINISHED) == 0) { + if ((val & soc_data->temp_valid_mask) == 0) { dev_dbg(&tz->device, "temp measurement never finished\n"); return -EAGAIN; } - n_meas = (val & TEMPSENSE0_TEMP_CNT_MASK) >> TEMPSENSE0_TEMP_CNT_SHIFT; + n_meas = (val & soc_data->temp_value_mask) + >> soc_data->temp_value_shift; /* See imx_init_calib() for formula derivation */ - *temp = data->c2 - n_meas * data->c1; + if (data->socdata->version == TEMPMON_IMX7D) + *temp = (n_meas - data->c1 + 25) * 1000; + else + *temp = data->c2 - n_meas * data->c1; /* Update alarm value to next higher trip point for TEMPMON_IMX6Q */ if (data->socdata->version == TEMPMON_IMX6Q) { @@ -219,21 +352,26 @@ static int imx_set_mode(struct thermal_zone_device *tz, { struct imx_thermal_data *data = tz->devdata; struct regmap *map = data->tempmon; + const struct thermal_soc_data *soc_data = data->socdata; if (mode == THERMAL_DEVICE_ENABLED) { tz->polling_delay = IMX_POLLING_DELAY; tz->passive_delay = IMX_PASSIVE_DELAY; - regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); - regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); + regmap_write(map, soc_data->sensor_ctrl + REG_CLR, + soc_data->power_down_mask); + regmap_write(map, soc_data->sensor_ctrl + REG_SET, + soc_data->measure_temp_mask); if (!data->irq_enabled) { data->irq_enabled = true; enable_irq(data->irq); } } else { - regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); - regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); + regmap_write(map, soc_data->sensor_ctrl + REG_CLR, + soc_data->measure_temp_mask); + regmap_write(map, soc_data->sensor_ctrl + REG_SET, + soc_data->power_down_mask); tz->polling_delay = 0; tz->passive_delay = 0; @@ -355,6 +493,15 @@ static int imx_init_calib(struct platform_device *pdev, u32 ocotp_ana1) } /* + * On i.MX7D, we only use the calibration data at 25C to get the temp, + * Tmeas = ( Nmeas - n1) + 25; n1 is the fuse value for 25C. + */ + if (data->socdata->version == TEMPMON_IMX7D) { + data->c1 = (ocotp_ana1 >> 9) & 0x1ff; + return 0; + } + + /* * The sensor is calibrated at 25 °C (aka T1) and the value measured * (aka N1) at this temperature is provided in bits [31:20] in the * i.MX's OCOTP value ANA1. @@ -492,6 +639,7 @@ static irqreturn_t imx_thermal_alarm_irq_thread(int irq, void *dev) static const struct of_device_id of_imx_thermal_match[] = { { .compatible = "fsl,imx6q-tempmon", .data = &thermal_imx6q_data, }, { .compatible = "fsl,imx6sx-tempmon", .data = &thermal_imx6sx_data, }, + { .compatible = "fsl,imx7d-tempmon", .data = &thermal_imx7d_data, }, { /* end */ } }; MODULE_DEVICE_TABLE(of, of_imx_thermal_match); @@ -523,14 +671,15 @@ static int imx_thermal_probe(struct platform_device *pdev) /* make sure the IRQ flag is clear before enabling irq on i.MX6SX */ if (data->socdata->version == TEMPMON_IMX6SX) { - regmap_write(map, MISC1 + REG_CLR, MISC1_IRQ_TEMPHIGH | - MISC1_IRQ_TEMPLOW | MISC1_IRQ_TEMPPANIC); + regmap_write(map, IMX6_MISC1 + REG_CLR, + IMX6_MISC1_IRQ_TEMPHIGH | IMX6_MISC1_IRQ_TEMPLOW + | IMX6_MISC1_IRQ_TEMPPANIC); /* * reset value of LOW ALARM is incorrect, set it to lowest * value to avoid false trigger of low alarm. */ - regmap_write(map, TEMPSENSE2 + REG_SET, - TEMPSENSE2_LOW_VALUE_MASK); + regmap_write(map, data->socdata->low_alarm_ctrl + REG_SET, + data->socdata->low_alarm_mask); } data->irq = platform_get_irq(pdev, 0); @@ -557,11 +706,17 @@ static int imx_thermal_probe(struct platform_device *pdev) } /* Make sure sensor is in known good state for measurements */ - regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); - regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); - regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ); - regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF); - regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); + regmap_write(map, data->socdata->sensor_ctrl + REG_CLR, + data->socdata->power_down_mask); + regmap_write(map, data->socdata->sensor_ctrl + REG_CLR, + data->socdata->measure_temp_mask); + regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR, + data->socdata->measure_freq_mask); + if (data->socdata->version != TEMPMON_IMX7D) + regmap_write(map, IMX6_MISC0 + REG_SET, + IMX6_MISC0_REFTOP_SELBIASOFF); + regmap_write(map, data->socdata->sensor_ctrl + REG_SET, + data->socdata->power_down_mask); data->policy = cpufreq_cpu_get(0); if (!data->policy) { @@ -626,16 +781,20 @@ static int imx_thermal_probe(struct platform_device *pdev) data->temp_passive / 1000); /* Enable measurements at ~ 10 Hz */ - regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ); + regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR, + data->socdata->measure_freq_mask); measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */ - regmap_write(map, TEMPSENSE1 + REG_SET, measure_freq); + regmap_write(map, data->socdata->measure_freq_ctrl + REG_SET, + measure_freq << data->socdata->measure_freq_shift); imx_set_alarm_temp(data, data->temp_passive); if (data->socdata->version == TEMPMON_IMX6SX) imx_set_panic_temp(data, data->temp_critical); - regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); - regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); + regmap_write(map, data->socdata->sensor_ctrl + REG_CLR, + data->socdata->power_down_mask); + regmap_write(map, data->socdata->sensor_ctrl + REG_SET, + data->socdata->measure_temp_mask); data->irq_enabled = true; data->mode = THERMAL_DEVICE_ENABLED; @@ -661,7 +820,8 @@ static int imx_thermal_remove(struct platform_device *pdev) struct regmap *map = data->tempmon; /* Disable measurements */ - regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); + regmap_write(map, data->socdata->sensor_ctrl + REG_SET, + data->socdata->power_down_mask); if (!IS_ERR(data->thermal_clk)) clk_disable_unprepare(data->thermal_clk); @@ -684,8 +844,10 @@ static int imx_thermal_suspend(struct device *dev) * temperature will be read as the thermal sensor is powered * down. */ - regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); - regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); + regmap_write(map, data->socdata->sensor_ctrl + REG_CLR, + data->socdata->measure_temp_mask); + regmap_write(map, data->socdata->sensor_ctrl + REG_SET, + data->socdata->power_down_mask); data->mode = THERMAL_DEVICE_DISABLED; clk_disable_unprepare(data->thermal_clk); @@ -702,8 +864,10 @@ static int imx_thermal_resume(struct device *dev) if (ret) return ret; /* Enabled thermal sensor after resume */ - regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); - regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); + regmap_write(map, data->socdata->sensor_ctrl + REG_CLR, + data->socdata->power_down_mask); + regmap_write(map, data->socdata->sensor_ctrl + REG_SET, + data->socdata->measure_temp_mask); data->mode = THERMAL_DEVICE_ENABLED; return 0; diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index c75661a3801a..0691f260f6ea 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -153,6 +153,12 @@ /* The number of sensing points per bank */ #define MT2712_NUM_SENSORS_PER_ZONE 4 +#define MT7622_TEMP_AUXADC_CHANNEL 11 +#define MT7622_NUM_SENSORS 1 +#define MT7622_NUM_ZONES 1 +#define MT7622_NUM_SENSORS_PER_ZONE 1 +#define MT7622_TS1 0 + struct mtk_thermal; struct thermal_bank_cfg { @@ -242,6 +248,12 @@ static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = { static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 }; +/* MT7622 thermal sensor data */ +static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, }; +static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, }; +static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, }; +static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, }; + /** * The MT8173 thermal controller has four banks. Each bank can read up to * four temperature sensors simultaneously. The MT8173 has a total of 5 @@ -329,6 +341,25 @@ static const struct mtk_thermal_data mt2712_thermal_data = { .sensor_mux_values = mt2712_mux_values, }; +/* + * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data + * access. + */ +static const struct mtk_thermal_data mt7622_thermal_data = { + .auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL, + .num_banks = MT7622_NUM_ZONES, + .num_sensors = MT7622_NUM_SENSORS, + .bank_data = { + { + .num_sensors = 1, + .sensors = mt7622_bank_data, + }, + }, + .msr = mt7622_msr, + .adcpnp = mt7622_adcpnp, + .sensor_mux_values = mt7622_mux_values, +}; + /** * raw_to_mcelsius - convert a raw ADC value to mcelsius * @mt: The thermal controller @@ -631,6 +662,10 @@ static const struct of_device_id mtk_thermal_of_match[] = { { .compatible = "mediatek,mt2712-thermal", .data = (void *)&mt2712_thermal_data, + }, + { + .compatible = "mediatek,mt7622-thermal", + .data = (void *)&mt7622_thermal_data, }, { }, }; @@ -642,7 +677,6 @@ static int mtk_thermal_probe(struct platform_device *pdev) struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node; struct mtk_thermal *mt; struct resource *res; - const struct of_device_id *of_id; u64 auxadc_phys_base, apmixed_phys_base; struct thermal_zone_device *tzdev; @@ -650,9 +684,7 @@ static int mtk_thermal_probe(struct platform_device *pdev) if (!mt) return -ENOMEM; - of_id = of_match_device(mtk_thermal_of_match, &pdev->dev); - if (of_id) - mt->conf = (const struct mtk_thermal_data *)of_id->data; + mt->conf = of_device_get_match_data(&pdev->dev); mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm"); if (IS_ERR(mt->clk_peri_therm)) diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom-spmi-temp-alarm.c index 95f987d5aa71..ad4f3a8d6560 100644 --- a/drivers/thermal/qcom-spmi-temp-alarm.c +++ b/drivers/thermal/qcom-spmi-temp-alarm.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2011-2015, 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -11,6 +11,7 @@ * GNU General Public License for more details. */ +#include <linux/bitops.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/iio/consumer.h> @@ -29,13 +30,17 @@ #define QPNP_TM_REG_ALARM_CTRL 0x46 #define QPNP_TM_TYPE 0x09 -#define QPNP_TM_SUBTYPE 0x08 +#define QPNP_TM_SUBTYPE_GEN1 0x08 +#define QPNP_TM_SUBTYPE_GEN2 0x09 -#define STATUS_STAGE_MASK 0x03 +#define STATUS_GEN1_STAGE_MASK GENMASK(1, 0) +#define STATUS_GEN2_STATE_MASK GENMASK(6, 4) +#define STATUS_GEN2_STATE_SHIFT 4 -#define SHUTDOWN_CTRL1_THRESHOLD_MASK 0x03 +#define SHUTDOWN_CTRL1_OVERRIDE_MASK GENMASK(7, 6) +#define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0) -#define ALARM_CTRL_FORCE_ENABLE 0x80 +#define ALARM_CTRL_FORCE_ENABLE BIT(7) /* * Trip point values based on threshold control @@ -58,6 +63,7 @@ struct qpnp_tm_chip { struct regmap *map; struct thermal_zone_device *tz_dev; + unsigned int subtype; long temp; unsigned int thresh; unsigned int stage; @@ -66,6 +72,9 @@ struct qpnp_tm_chip { struct iio_channel *adc; }; +/* This array maps from GEN2 alarm state to GEN1 alarm stage */ +static const unsigned int alarm_state_map[8] = {0, 1, 1, 2, 2, 3, 3, 3}; + static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8 *data) { unsigned int val; @@ -84,30 +93,59 @@ static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data) return regmap_write(chip->map, chip->base + addr, data); } +/** + * qpnp_tm_get_temp_stage() - return over-temperature stage + * @chip: Pointer to the qpnp_tm chip + * + * Return: stage (GEN1) or state (GEN2) on success, or errno on failure. + */ +static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip) +{ + int ret; + u8 reg = 0; + + ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®); + if (ret < 0) + return ret; + + if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) + ret = reg & STATUS_GEN1_STAGE_MASK; + else + ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT; + + return ret; +} + /* * This function updates the internal temp value based on the * current thermal stage and threshold as well as the previous stage */ static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip) { - unsigned int stage; + unsigned int stage, stage_new, stage_old; int ret; - u8 reg = 0; - ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®); + ret = qpnp_tm_get_temp_stage(chip); if (ret < 0) return ret; + stage = ret; - stage = reg & STATUS_STAGE_MASK; + if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) { + stage_new = stage; + stage_old = chip->stage; + } else { + stage_new = alarm_state_map[stage]; + stage_old = alarm_state_map[chip->stage]; + } - if (stage > chip->stage) { + if (stage_new > stage_old) { /* increasing stage, use lower bound */ - chip->temp = (stage - 1) * TEMP_STAGE_STEP + + chip->temp = (stage_new - 1) * TEMP_STAGE_STEP + chip->thresh * TEMP_THRESH_STEP + TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN; - } else if (stage < chip->stage) { + } else if (stage_new < stage_old) { /* decreasing stage, use upper bound */ - chip->temp = stage * TEMP_STAGE_STEP + + chip->temp = stage_new * TEMP_STAGE_STEP + chip->thresh * TEMP_THRESH_STEP - TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN; } @@ -162,28 +200,37 @@ static irqreturn_t qpnp_tm_isr(int irq, void *data) */ static int qpnp_tm_init(struct qpnp_tm_chip *chip) { + unsigned int stage; int ret; - u8 reg; + u8 reg = 0; - chip->thresh = THRESH_MIN; + ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, ®); + if (ret < 0) + return ret; + + chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK; chip->temp = DEFAULT_TEMP; - ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®); + ret = qpnp_tm_get_temp_stage(chip); if (ret < 0) return ret; + chip->stage = ret; - chip->stage = reg & STATUS_STAGE_MASK; + stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1 + ? chip->stage : alarm_state_map[chip->stage]; - if (chip->stage) + if (stage) chip->temp = chip->thresh * TEMP_THRESH_STEP + - (chip->stage - 1) * TEMP_STAGE_STEP + + (stage - 1) * TEMP_STAGE_STEP + TEMP_THRESH_MIN; /* * Set threshold and disable software override of stage 2 and 3 * shutdowns. */ - reg = chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK; + chip->thresh = THRESH_MIN; + reg &= ~(SHUTDOWN_CTRL1_OVERRIDE_MASK | SHUTDOWN_CTRL1_THRESHOLD_MASK); + reg |= chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK; ret = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg); if (ret < 0) return ret; @@ -246,12 +293,15 @@ static int qpnp_tm_probe(struct platform_device *pdev) return ret; } - if (type != QPNP_TM_TYPE || subtype != QPNP_TM_SUBTYPE) { + if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1 + && subtype != QPNP_TM_SUBTYPE_GEN2)) { dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n", type, subtype); return -ENODEV; } + chip->subtype = subtype; + ret = qpnp_tm_init(chip); if (ret < 0) { dev_err(&pdev->dev, "init failed\n"); diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index c2c34425279d..3440166c2ae9 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -115,6 +115,7 @@ static int tsens_probe(struct platform_device *pdev) struct tsens_device *tmdev; const struct tsens_data *data; const struct of_device_id *id; + u32 num_sensors; if (pdev->dev.of_node) dev = &pdev->dev; @@ -129,19 +130,24 @@ static int tsens_probe(struct platform_device *pdev) else data = &data_8960; - if (data->num_sensors <= 0) { + num_sensors = data->num_sensors; + + if (np) + of_property_read_u32(np, "#qcom,sensors", &num_sensors); + + if (num_sensors <= 0) { dev_err(dev, "invalid number of sensors\n"); return -EINVAL; } tmdev = devm_kzalloc(dev, - struct_size(tmdev, sensor, data->num_sensors), + struct_size(tmdev, sensor, num_sensors), GFP_KERNEL); if (!tmdev) return -ENOMEM; tmdev->dev = dev; - tmdev->num_sensors = data->num_sensors; + tmdev->num_sensors = num_sensors; tmdev->ops = data->ops; for (i = 0; i < tmdev->num_sensors; i++) { if (data->hw_ids) diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c index 561a0a332208..766521eb7071 100644 --- a/drivers/thermal/rcar_gen3_thermal.c +++ b/drivers/thermal/rcar_gen3_thermal.c @@ -132,7 +132,7 @@ static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc, #define RCAR3_THERMAL_GRAN 500 /* mili Celsius */ /* no idea where these constants come from */ -#define TJ_1 96 +#define TJ_1 116 #define TJ_3 -41 static void rcar_gen3_thermal_calc_coefs(struct equation_coefs *coef, @@ -146,7 +146,7 @@ static void rcar_gen3_thermal_calc_coefs(struct equation_coefs *coef, * Division is not scaled in BSP and if scaled it might overflow * the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled */ - tj_2 = (FIXPT_INT((ptat[1] - ptat[2]) * 137) + tj_2 = (FIXPT_INT((ptat[1] - ptat[2]) * 157) / (ptat[0] - ptat[2])) - FIXPT_INT(41); coef->a1 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[2]), @@ -207,8 +207,8 @@ static int rcar_gen3_thermal_set_trips(void *devdata, int low, int high) { struct rcar_gen3_thermal_tsc *tsc = devdata; - low = clamp_val(low, -40000, 125000); - high = clamp_val(high, -40000, 125000); + low = clamp_val(low, -40000, 120000); + high = clamp_val(high, -40000, 120000); rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1, rcar_gen3_thermal_mcelsius_to_temp(tsc, low)); @@ -329,6 +329,7 @@ static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc) static const struct of_device_id rcar_gen3_thermal_dt_ids[] = { { .compatible = "renesas,r8a7795-thermal", }, { .compatible = "renesas,r8a7796-thermal", }, + { .compatible = "renesas,r8a77965-thermal", }, {}, }; MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids); @@ -354,11 +355,11 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev) /* default values if FUSEs are missing */ /* TODO: Read values from hardware on supported platforms */ - int ptat[3] = { 2351, 1509, 435 }; + int ptat[3] = { 2631, 1509, 435 }; int thcode[TSC_MAX_NUM][3] = { - { 3248, 2800, 2221 }, - { 3245, 2795, 2216 }, - { 3250, 2805, 2237 }, + { 3397, 2800, 2221 }, + { 3393, 2795, 2216 }, + { 3389, 2805, 2237 }, }; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index 73e5fee6cf1d..45fb284d4c11 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -58,10 +58,47 @@ struct rcar_thermal_common { spinlock_t lock; }; +struct rcar_thermal_chip { + unsigned int use_of_thermal : 1; + unsigned int has_filonoff : 1; + unsigned int irq_per_ch : 1; + unsigned int needs_suspend_resume : 1; + unsigned int nirqs; +}; + +static const struct rcar_thermal_chip rcar_thermal = { + .use_of_thermal = 0, + .has_filonoff = 1, + .irq_per_ch = 0, + .needs_suspend_resume = 0, + .nirqs = 1, +}; + +static const struct rcar_thermal_chip rcar_gen2_thermal = { + .use_of_thermal = 1, + .has_filonoff = 1, + .irq_per_ch = 0, + .needs_suspend_resume = 0, + .nirqs = 1, +}; + +static const struct rcar_thermal_chip rcar_gen3_thermal = { + .use_of_thermal = 1, + .has_filonoff = 0, + .irq_per_ch = 1, + .needs_suspend_resume = 1, + /* + * The Gen3 chip has 3 interrupts, but this driver uses only 2 + * interrupts to detect a temperature change, rise or fall. + */ + .nirqs = 2, +}; + struct rcar_thermal_priv { void __iomem *base; struct rcar_thermal_common *common; struct thermal_zone_device *zone; + const struct rcar_thermal_chip *chip; struct delayed_work work; struct mutex lock; struct list_head list; @@ -77,13 +114,20 @@ struct rcar_thermal_priv { #define rcar_priv_to_dev(priv) ((priv)->common->dev) #define rcar_has_irq_support(priv) ((priv)->common->base) #define rcar_id_to_shift(priv) ((priv)->id * 8) -#define rcar_of_data(dev) ((unsigned long)of_device_get_match_data(dev)) -#define rcar_use_of_thermal(dev) (rcar_of_data(dev) == USE_OF_THERMAL) -#define USE_OF_THERMAL 1 static const struct of_device_id rcar_thermal_dt_ids[] = { - { .compatible = "renesas,rcar-thermal", }, - { .compatible = "renesas,rcar-gen2-thermal", .data = (void *)USE_OF_THERMAL }, + { + .compatible = "renesas,rcar-thermal", + .data = &rcar_thermal, + }, + { + .compatible = "renesas,rcar-gen2-thermal", + .data = &rcar_gen2_thermal, + }, + { + .compatible = "renesas,thermal-r8a77995", + .data = &rcar_gen3_thermal, + }, {}, }; MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids); @@ -190,7 +234,8 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv) * enable IRQ */ if (rcar_has_irq_support(priv)) { - rcar_thermal_write(priv, FILONOFF, 0); + if (priv->chip->has_filonoff) + rcar_thermal_write(priv, FILONOFF, 0); /* enable Rising/Falling edge interrupt */ rcar_thermal_write(priv, POSNEG, 0x1); @@ -420,7 +465,7 @@ static int rcar_thermal_remove(struct platform_device *pdev) rcar_thermal_for_each_priv(priv, common) { rcar_thermal_irq_disable(priv); - if (rcar_use_of_thermal(dev)) + if (priv->chip->use_of_thermal) thermal_remove_hwmon_sysfs(priv->zone); else thermal_zone_device_unregister(priv->zone); @@ -438,6 +483,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) struct rcar_thermal_priv *priv; struct device *dev = &pdev->dev; struct resource *res, *irq; + const struct rcar_thermal_chip *chip = of_device_get_match_data(dev); int mres = 0; int i; int ret = -ENODEV; @@ -457,19 +503,35 @@ static int rcar_thermal_probe(struct platform_device *pdev) pm_runtime_enable(dev); pm_runtime_get_sync(dev); - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (irq) { - /* - * platform has IRQ support. - * Then, driver uses common registers - * rcar_has_irq_support() will be enabled - */ - res = platform_get_resource(pdev, IORESOURCE_MEM, mres++); - common->base = devm_ioremap_resource(dev, res); - if (IS_ERR(common->base)) - return PTR_ERR(common->base); + for (i = 0; i < chip->nirqs; i++) { + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq) + continue; + if (!common->base) { + /* + * platform has IRQ support. + * Then, driver uses common registers + * rcar_has_irq_support() will be enabled + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, + mres++); + common->base = devm_ioremap_resource(dev, res); + if (IS_ERR(common->base)) + return PTR_ERR(common->base); + + idle = 0; /* polling delay is not needed */ + } - idle = 0; /* polling delay is not needed */ + ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, + IRQF_SHARED, dev_name(dev), common); + if (ret) { + dev_err(dev, "irq request failed\n "); + goto error_unregister; + } + + /* update ENR bits */ + if (chip->irq_per_ch) + enr_bits |= 1 << i; } for (i = 0;; i++) { @@ -491,6 +553,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) priv->common = common; priv->id = i; + priv->chip = chip; mutex_init(&priv->lock); INIT_LIST_HEAD(&priv->list); INIT_DELAYED_WORK(&priv->work, rcar_thermal_work); @@ -498,7 +561,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) if (ret < 0) goto error_unregister; - if (rcar_use_of_thermal(dev)) + if (chip->use_of_thermal) priv->zone = devm_thermal_zone_of_sensor_register( dev, i, priv, &rcar_thermal_zone_of_ops); @@ -515,7 +578,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) goto error_unregister; } - if (rcar_use_of_thermal(dev)) { + if (chip->use_of_thermal) { /* * thermal_zone doesn't enable hwmon as default, * but, enable it here to keep compatible @@ -531,20 +594,12 @@ static int rcar_thermal_probe(struct platform_device *pdev) list_move_tail(&priv->list, &common->head); /* update ENR bits */ - enr_bits |= 3 << (i * 8); + if (!chip->irq_per_ch) + enr_bits |= 3 << (i * 8); } - /* enable temperature comparation */ - if (irq) { - ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0, - dev_name(dev), common); - if (ret) { - dev_err(dev, "irq request failed\n "); - goto error_unregister; - } - + if (enr_bits) rcar_thermal_common_write(common, ENR, enr_bits); - } dev_info(dev, "%d sensor probed\n", i); @@ -556,9 +611,48 @@ error_unregister: return ret; } +#ifdef CONFIG_PM_SLEEP +static int rcar_thermal_suspend(struct device *dev) +{ + struct rcar_thermal_common *common = dev_get_drvdata(dev); + struct rcar_thermal_priv *priv = list_first_entry(&common->head, + typeof(*priv), list); + + if (priv->chip->needs_suspend_resume) { + rcar_thermal_common_write(common, ENR, 0); + rcar_thermal_irq_disable(priv); + rcar_thermal_bset(priv, THSCR, CPCTL, 0); + } + + return 0; +} + +static int rcar_thermal_resume(struct device *dev) +{ + struct rcar_thermal_common *common = dev_get_drvdata(dev); + struct rcar_thermal_priv *priv = list_first_entry(&common->head, + typeof(*priv), list); + int ret; + + if (priv->chip->needs_suspend_resume) { + ret = rcar_thermal_update_temp(priv); + if (ret < 0) + return ret; + rcar_thermal_irq_enable(priv); + rcar_thermal_common_write(common, ENR, 0x03); + } + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(rcar_thermal_pm_ops, rcar_thermal_suspend, + rcar_thermal_resume); + static struct platform_driver rcar_thermal_driver = { .driver = { .name = "rcar_thermal", + .pm = &rcar_thermal_pm_ops, .of_match_table = rcar_thermal_dt_ids, }, .probe = rcar_thermal_probe, diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index ac83f721db24..a992e51ef065 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -29,13 +29,14 @@ #include <linux/io.h> #include <linux/interrupt.h> #include <linux/module.h> -#include <linux/of.h> +#include <linux/of_device.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> -#include "exynos_tmu.h" +#include <dt-bindings/thermal/thermal_exynos.h> + #include "../thermal_core.h" /* Exynos generic registers */ @@ -75,9 +76,6 @@ #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 #define EXYNOS_TMU_INTEN_RISE0_SHIFT 0 -#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4 -#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8 -#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12 #define EXYNOS_TMU_INTEN_FALL0_SHIFT 16 #define EXYNOS_EMUL_TIME 0x57F0 @@ -98,11 +96,6 @@ #define EXYNOS4412_MUX_ADDR_SHIFT 20 /* Exynos5433 specific registers */ -#define EXYNOS5433_TMU_REG_CONTROL1 0x024 -#define EXYNOS5433_TMU_SAMPLING_INTERVAL 0x02c -#define EXYNOS5433_TMU_COUNTER_VALUE0 0x030 -#define EXYNOS5433_TMU_COUNTER_VALUE1 0x034 -#define EXYNOS5433_TMU_REG_CURRENT_TEMP1 0x044 #define EXYNOS5433_THD_TEMP_RISE3_0 0x050 #define EXYNOS5433_THD_TEMP_RISE7_4 0x054 #define EXYNOS5433_THD_TEMP_FALL3_0 0x060 @@ -123,27 +116,7 @@ #define EXYNOS5433_PD_DET_EN 1 -/*exynos5440 specific registers*/ -#define EXYNOS5440_TMU_S0_7_TRIM 0x000 -#define EXYNOS5440_TMU_S0_7_CTRL 0x020 -#define EXYNOS5440_TMU_S0_7_DEBUG 0x040 -#define EXYNOS5440_TMU_S0_7_TEMP 0x0f0 -#define EXYNOS5440_TMU_S0_7_TH0 0x110 -#define EXYNOS5440_TMU_S0_7_TH1 0x130 -#define EXYNOS5440_TMU_S0_7_TH2 0x150 -#define EXYNOS5440_TMU_S0_7_IRQEN 0x210 -#define EXYNOS5440_TMU_S0_7_IRQ 0x230 -/* exynos5440 common registers */ -#define EXYNOS5440_TMU_IRQ_STATUS 0x000 -#define EXYNOS5440_TMU_PMIN 0x004 - -#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0 -#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1 -#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2 -#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3 -#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4 -#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24 -#define EXYNOS5440_EFUSE_SWAP_OFFSET 8 +#define EXYNOS5433_G3D_BASE 0x10070000 /* Exynos7 specific registers */ #define EXYNOS7_THD_TEMP_RISE7_6 0x50 @@ -155,22 +128,32 @@ #define EXYNOS7_TMU_TEMP_MASK 0x1ff #define EXYNOS7_PD_DET_EN_SHIFT 23 #define EXYNOS7_TMU_INTEN_RISE0_SHIFT 0 -#define EXYNOS7_TMU_INTEN_RISE1_SHIFT 1 -#define EXYNOS7_TMU_INTEN_RISE2_SHIFT 2 -#define EXYNOS7_TMU_INTEN_RISE3_SHIFT 3 -#define EXYNOS7_TMU_INTEN_RISE4_SHIFT 4 -#define EXYNOS7_TMU_INTEN_RISE5_SHIFT 5 -#define EXYNOS7_TMU_INTEN_RISE6_SHIFT 6 -#define EXYNOS7_TMU_INTEN_RISE7_SHIFT 7 #define EXYNOS7_EMUL_DATA_SHIFT 7 #define EXYNOS7_EMUL_DATA_MASK 0x1ff +#define EXYNOS_FIRST_POINT_TRIM 25 +#define EXYNOS_SECOND_POINT_TRIM 85 + +#define EXYNOS_NOISE_CANCEL_MODE 4 + #define MCELSIUS 1000 + +enum soc_type { + SOC_ARCH_EXYNOS3250 = 1, + SOC_ARCH_EXYNOS4210, + SOC_ARCH_EXYNOS4412, + SOC_ARCH_EXYNOS5250, + SOC_ARCH_EXYNOS5260, + SOC_ARCH_EXYNOS5420, + SOC_ARCH_EXYNOS5420_TRIMINFO, + SOC_ARCH_EXYNOS5433, + SOC_ARCH_EXYNOS7, +}; + /** * struct exynos_tmu_data : A structure to hold the private data of the TMU driver * @id: identifier of the one instance of the TMU controller. - * @pdata: pointer to the tmu platform/configuration data * @base: base address of the single instance of the TMU controller. * @base_second: base address of the common registers of the TMU controller. * @irq: irq number of the TMU controller. @@ -180,8 +163,17 @@ * @clk: pointer to the clock structure. * @clk_sec: pointer to the clock structure for accessing the base_second. * @sclk: pointer to the clock structure for accessing the tmu special clk. + * @cal_type: calibration type for temperature + * @efuse_value: SoC defined fuse value + * @min_efuse_value: minimum valid trimming data + * @max_efuse_value: maximum valid trimming data * @temp_error1: fused value of the first point trim. * @temp_error2: fused value of the second point trim. + * @gain: gain of amplifier in the positive-TC generator block + * 0 < gain <= 15 + * @reference_voltage: reference voltage of amplifier + * in the positive-TC generator block + * 0 < reference_voltage <= 31 * @regulator: pointer to the TMU regulator structure. * @reg_conf: pointer to structure to register with core thermal. * @ntrip: number of supported trip points. @@ -194,7 +186,6 @@ */ struct exynos_tmu_data { int id; - struct exynos_tmu_platform_data *pdata; void __iomem *base; void __iomem *base_second; int irq; @@ -202,71 +193,42 @@ struct exynos_tmu_data { struct work_struct irq_work; struct mutex lock; struct clk *clk, *clk_sec, *sclk; + u32 cal_type; + u32 efuse_value; + u32 min_efuse_value; + u32 max_efuse_value; u16 temp_error1, temp_error2; + u8 gain; + u8 reference_voltage; struct regulator *regulator; struct thermal_zone_device *tzd; unsigned int ntrip; bool enabled; - int (*tmu_initialize)(struct platform_device *pdev); + void (*tmu_set_trip_temp)(struct exynos_tmu_data *data, int trip, + u8 temp); + void (*tmu_set_trip_hyst)(struct exynos_tmu_data *data, int trip, + u8 temp, u8 hyst); + void (*tmu_initialize)(struct platform_device *pdev); void (*tmu_control)(struct platform_device *pdev, bool on); int (*tmu_read)(struct exynos_tmu_data *data); void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp); void (*tmu_clear_irqs)(struct exynos_tmu_data *data); }; -static void exynos_report_trigger(struct exynos_tmu_data *p) -{ - char data[10], *envp[] = { data, NULL }; - struct thermal_zone_device *tz = p->tzd; - int temp; - unsigned int i; - - if (!tz) { - pr_err("No thermal zone device defined\n"); - return; - } - - thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); - - mutex_lock(&tz->lock); - /* Find the level for which trip happened */ - for (i = 0; i < of_thermal_get_ntrips(tz); i++) { - tz->ops->get_trip_temp(tz, i, &temp); - if (tz->last_temperature < temp) - break; - } - - snprintf(data, sizeof(data), "%u", i); - kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, envp); - mutex_unlock(&tz->lock); -} - /* * TMU treats temperature as a mapped temperature code. * The temperature is converted differently depending on the calibration type. */ static int temp_to_code(struct exynos_tmu_data *data, u8 temp) { - struct exynos_tmu_platform_data *pdata = data->pdata; - int temp_code; - - switch (pdata->cal_type) { - case TYPE_TWO_POINT_TRIMMING: - temp_code = (temp - pdata->first_point_trim) * - (data->temp_error2 - data->temp_error1) / - (pdata->second_point_trim - pdata->first_point_trim) + - data->temp_error1; - break; - case TYPE_ONE_POINT_TRIMMING: - temp_code = temp + data->temp_error1 - pdata->first_point_trim; - break; - default: - temp_code = temp + pdata->default_temp_offset; - break; - } + if (data->cal_type == TYPE_ONE_POINT_TRIMMING) + return temp + data->temp_error1 - EXYNOS_FIRST_POINT_TRIM; - return temp_code; + return (temp - EXYNOS_FIRST_POINT_TRIM) * + (data->temp_error2 - data->temp_error1) / + (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) + + data->temp_error1; } /* @@ -275,120 +237,123 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp) */ static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code) { - struct exynos_tmu_platform_data *pdata = data->pdata; - int temp; - - switch (pdata->cal_type) { - case TYPE_TWO_POINT_TRIMMING: - temp = (temp_code - data->temp_error1) * - (pdata->second_point_trim - pdata->first_point_trim) / - (data->temp_error2 - data->temp_error1) + - pdata->first_point_trim; - break; - case TYPE_ONE_POINT_TRIMMING: - temp = temp_code - data->temp_error1 + pdata->first_point_trim; - break; - default: - temp = temp_code - pdata->default_temp_offset; - break; - } + if (data->cal_type == TYPE_ONE_POINT_TRIMMING) + return temp_code - data->temp_error1 + EXYNOS_FIRST_POINT_TRIM; - return temp; + return (temp_code - data->temp_error1) * + (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) / + (data->temp_error2 - data->temp_error1) + + EXYNOS_FIRST_POINT_TRIM; } static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info) { - struct exynos_tmu_platform_data *pdata = data->pdata; + u16 tmu_temp_mask = + (data->soc == SOC_ARCH_EXYNOS7) ? EXYNOS7_TMU_TEMP_MASK + : EXYNOS_TMU_TEMP_MASK; - data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; + data->temp_error1 = trim_info & tmu_temp_mask; data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) & EXYNOS_TMU_TEMP_MASK); if (!data->temp_error1 || - (pdata->min_efuse_value > data->temp_error1) || - (data->temp_error1 > pdata->max_efuse_value)) - data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK; + (data->min_efuse_value > data->temp_error1) || + (data->temp_error1 > data->max_efuse_value)) + data->temp_error1 = data->efuse_value & EXYNOS_TMU_TEMP_MASK; if (!data->temp_error2) data->temp_error2 = - (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) & + (data->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) & EXYNOS_TMU_TEMP_MASK; } -static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling) +static int exynos_tmu_initialize(struct platform_device *pdev) { - struct thermal_zone_device *tz = data->tzd; + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + struct thermal_zone_device *tzd = data->tzd; const struct thermal_trip * const trips = - of_thermal_get_trip_points(tz); - unsigned long temp; - int i; + of_thermal_get_trip_points(tzd); + unsigned int status; + int ret = 0, temp, hyst; if (!trips) { - pr_err("%s: Cannot get trip points from of-thermal.c!\n", - __func__); - return 0; + dev_err(&pdev->dev, + "Cannot get trip points from device tree!\n"); + return -ENODEV; } - for (i = 0; i < of_thermal_get_ntrips(tz); i++) { - if (trips[i].type == THERMAL_TRIP_CRITICAL) - continue; - - temp = trips[i].temperature / MCELSIUS; - if (falling) - temp -= (trips[i].hysteresis / MCELSIUS); - else - threshold &= ~(0xff << 8 * i); - - threshold |= temp_to_code(data, temp) << 8 * i; + if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */ + ret = tzd->ops->get_crit_temp(tzd, &temp); + if (ret) { + dev_err(&pdev->dev, + "No CRITICAL trip point defined in device tree!\n"); + goto out; } - return threshold; -} - -static int exynos_tmu_initialize(struct platform_device *pdev) -{ - struct exynos_tmu_data *data = platform_get_drvdata(pdev); - int ret; - - if (of_thermal_get_ntrips(data->tzd) > data->ntrip) { + if (of_thermal_get_ntrips(tzd) > data->ntrip) { dev_info(&pdev->dev, "More trip points than supported by this TMU.\n"); dev_info(&pdev->dev, "%d trip points should be configured in polling mode.\n", - (of_thermal_get_ntrips(data->tzd) - data->ntrip)); + (of_thermal_get_ntrips(tzd) - data->ntrip)); } mutex_lock(&data->lock); clk_enable(data->clk); if (!IS_ERR(data->clk_sec)) clk_enable(data->clk_sec); - ret = data->tmu_initialize(pdev); + + status = readb(data->base + EXYNOS_TMU_REG_STATUS); + if (!status) { + ret = -EBUSY; + } else { + int i, ntrips = + min_t(int, of_thermal_get_ntrips(tzd), data->ntrip); + + data->tmu_initialize(pdev); + + /* Write temperature code for rising and falling threshold */ + for (i = 0; i < ntrips; i++) { + /* Write temperature code for rising threshold */ + ret = tzd->ops->get_trip_temp(tzd, i, &temp); + if (ret) + goto err; + temp /= MCELSIUS; + data->tmu_set_trip_temp(data, i, temp); + + /* Write temperature code for falling threshold */ + ret = tzd->ops->get_trip_hyst(tzd, i, &hyst); + if (ret) + goto err; + hyst /= MCELSIUS; + data->tmu_set_trip_hyst(data, i, temp, hyst); + } + + data->tmu_clear_irqs(data); + } +err: clk_disable(data->clk); mutex_unlock(&data->lock); if (!IS_ERR(data->clk_sec)) clk_disable(data->clk_sec); - +out: return ret; } static u32 get_con_reg(struct exynos_tmu_data *data, u32 con) { - struct exynos_tmu_platform_data *pdata = data->pdata; - if (data->soc == SOC_ARCH_EXYNOS4412 || data->soc == SOC_ARCH_EXYNOS3250) con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT); con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT); - con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT; + con |= data->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT; con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); - con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); + con |= (data->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); - if (pdata->noise_cancel_mode) { - con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT); - con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT); - } + con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT); + con |= (EXYNOS_NOISE_CANCEL_MODE << EXYNOS_TMU_TRIP_MODE_SHIFT); return con; } @@ -405,65 +370,70 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) mutex_unlock(&data->lock); } -static int exynos4210_tmu_initialize(struct platform_device *pdev) +static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data, + int trip, u8 temp) { - struct exynos_tmu_data *data = platform_get_drvdata(pdev); - struct thermal_zone_device *tz = data->tzd; const struct thermal_trip * const trips = - of_thermal_get_trip_points(tz); - int ret = 0, threshold_code, i; - unsigned long reference, temp; - unsigned int status; + of_thermal_get_trip_points(data->tzd); + u8 ref, th_code; - if (!trips) { - pr_err("%s: Cannot get trip points from of-thermal.c!\n", - __func__); - ret = -ENODEV; - goto out; - } + ref = trips[0].temperature / MCELSIUS; - status = readb(data->base + EXYNOS_TMU_REG_STATUS); - if (!status) { - ret = -EBUSY; - goto out; + if (trip == 0) { + th_code = temp_to_code(data, ref); + writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); } + temp -= ref; + writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4); +} + +/* failing thresholds are not supported on Exynos4210 */ +static void exynos4210_tmu_set_trip_hyst(struct exynos_tmu_data *data, + int trip, u8 temp, u8 hyst) +{ +} + +static void exynos4210_tmu_initialize(struct platform_device *pdev) +{ + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO)); +} - /* Write temperature code for threshold */ - reference = trips[0].temperature / MCELSIUS; - threshold_code = temp_to_code(data, reference); - if (threshold_code < 0) { - ret = threshold_code; - goto out; - } - writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); +static void exynos4412_tmu_set_trip_temp(struct exynos_tmu_data *data, + int trip, u8 temp) +{ + u32 th, con; - for (i = 0; i < of_thermal_get_ntrips(tz); i++) { - temp = trips[i].temperature / MCELSIUS; - writeb(temp - reference, data->base + - EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4); + th = readl(data->base + EXYNOS_THD_TEMP_RISE); + th &= ~(0xff << 8 * trip); + th |= temp_to_code(data, temp) << 8 * trip; + writel(th, data->base + EXYNOS_THD_TEMP_RISE); + + if (trip == 3) { + con = readl(data->base + EXYNOS_TMU_REG_CONTROL); + con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); + writel(con, data->base + EXYNOS_TMU_REG_CONTROL); } +} - data->tmu_clear_irqs(data); -out: - return ret; +static void exynos4412_tmu_set_trip_hyst(struct exynos_tmu_data *data, + int trip, u8 temp, u8 hyst) +{ + u32 th; + + th = readl(data->base + EXYNOS_THD_TEMP_FALL); + th &= ~(0xff << 8 * trip); + if (hyst) + th |= temp_to_code(data, temp - hyst) << 8 * trip; + writel(th, data->base + EXYNOS_THD_TEMP_FALL); } -static int exynos4412_tmu_initialize(struct platform_device *pdev) +static void exynos4412_tmu_initialize(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); - const struct thermal_trip * const trips = - of_thermal_get_trip_points(data->tzd); - unsigned int status, trim_info, con, ctrl, rising_threshold; - int ret = 0, threshold_code, i; - unsigned long crit_temp = 0; - - status = readb(data->base + EXYNOS_TMU_REG_STATUS); - if (!status) { - ret = -EBUSY; - goto out; - } + unsigned int trim_info, ctrl; if (data->soc == SOC_ARCH_EXYNOS3250 || data->soc == SOC_ARCH_EXYNOS4412 || @@ -485,58 +455,53 @@ static int exynos4412_tmu_initialize(struct platform_device *pdev) trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); sanitize_temp_error(data, trim_info); +} - /* Write temperature code for rising and falling threshold */ - rising_threshold = readl(data->base + EXYNOS_THD_TEMP_RISE); - rising_threshold = get_th_reg(data, rising_threshold, false); - writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE); - writel(get_th_reg(data, 0, true), data->base + EXYNOS_THD_TEMP_FALL); - - data->tmu_clear_irqs(data); +static void exynos5433_tmu_set_trip_temp(struct exynos_tmu_data *data, + int trip, u8 temp) +{ + unsigned int reg_off, j; + u32 th; - /* if last threshold limit is also present */ - for (i = 0; i < of_thermal_get_ntrips(data->tzd); i++) { - if (trips[i].type == THERMAL_TRIP_CRITICAL) { - crit_temp = trips[i].temperature; - break; - } + if (trip > 3) { + reg_off = EXYNOS5433_THD_TEMP_RISE7_4; + j = trip - 4; + } else { + reg_off = EXYNOS5433_THD_TEMP_RISE3_0; + j = trip; } - if (i == of_thermal_get_ntrips(data->tzd)) { - pr_err("%s: No CRITICAL trip point defined at of-thermal.c!\n", - __func__); - ret = -EINVAL; - goto out; - } + th = readl(data->base + reg_off); + th &= ~(0xff << j * 8); + th |= (temp_to_code(data, temp) << j * 8); + writel(th, data->base + reg_off); +} - threshold_code = temp_to_code(data, crit_temp / MCELSIUS); - /* 1-4 level to be assigned in th0 reg */ - rising_threshold &= ~(0xff << 8 * i); - rising_threshold |= threshold_code << 8 * i; - writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE); - con = readl(data->base + EXYNOS_TMU_REG_CONTROL); - con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); - writel(con, data->base + EXYNOS_TMU_REG_CONTROL); +static void exynos5433_tmu_set_trip_hyst(struct exynos_tmu_data *data, + int trip, u8 temp, u8 hyst) +{ + unsigned int reg_off, j; + u32 th; -out: - return ret; + if (trip > 3) { + reg_off = EXYNOS5433_THD_TEMP_FALL7_4; + j = trip - 4; + } else { + reg_off = EXYNOS5433_THD_TEMP_FALL3_0; + j = trip; + } + + th = readl(data->base + reg_off); + th &= ~(0xff << j * 8); + th |= (temp_to_code(data, temp - hyst) << j * 8); + writel(th, data->base + reg_off); } -static int exynos5433_tmu_initialize(struct platform_device *pdev) +static void exynos5433_tmu_initialize(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); - struct exynos_tmu_platform_data *pdata = data->pdata; - struct thermal_zone_device *tz = data->tzd; - unsigned int status, trim_info; - unsigned int rising_threshold = 0, falling_threshold = 0; - int temp, temp_hist; - int ret = 0, threshold_code, i, sensor_id, cal_type; - - status = readb(data->base + EXYNOS_TMU_REG_STATUS); - if (!status) { - ret = -EBUSY; - goto out; - } + unsigned int trim_info; + int sensor_id, cal_type; trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); sanitize_temp_error(data, trim_info); @@ -552,227 +517,84 @@ static int exynos5433_tmu_initialize(struct platform_device *pdev) >> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT; switch (cal_type) { - case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING: - pdata->cal_type = TYPE_ONE_POINT_TRIMMING; - break; case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING: - pdata->cal_type = TYPE_TWO_POINT_TRIMMING; + data->cal_type = TYPE_TWO_POINT_TRIMMING; break; + case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING: default: - pdata->cal_type = TYPE_ONE_POINT_TRIMMING; + data->cal_type = TYPE_ONE_POINT_TRIMMING; break; } dev_info(&pdev->dev, "Calibration type is %d-point calibration\n", cal_type ? 2 : 1); - - /* Write temperature code for rising and falling threshold */ - for (i = 0; i < of_thermal_get_ntrips(tz); i++) { - int rising_reg_offset, falling_reg_offset; - int j = 0; - - switch (i) { - case 0: - case 1: - case 2: - case 3: - rising_reg_offset = EXYNOS5433_THD_TEMP_RISE3_0; - falling_reg_offset = EXYNOS5433_THD_TEMP_FALL3_0; - j = i; - break; - case 4: - case 5: - case 6: - case 7: - rising_reg_offset = EXYNOS5433_THD_TEMP_RISE7_4; - falling_reg_offset = EXYNOS5433_THD_TEMP_FALL7_4; - j = i - 4; - break; - default: - continue; - } - - /* Write temperature code for rising threshold */ - tz->ops->get_trip_temp(tz, i, &temp); - temp /= MCELSIUS; - threshold_code = temp_to_code(data, temp); - - rising_threshold = readl(data->base + rising_reg_offset); - rising_threshold |= (threshold_code << j * 8); - writel(rising_threshold, data->base + rising_reg_offset); - - /* Write temperature code for falling threshold */ - tz->ops->get_trip_hyst(tz, i, &temp_hist); - temp_hist = temp - (temp_hist / MCELSIUS); - threshold_code = temp_to_code(data, temp_hist); - - falling_threshold = readl(data->base + falling_reg_offset); - falling_threshold &= ~(0xff << j * 8); - falling_threshold |= (threshold_code << j * 8); - writel(falling_threshold, data->base + falling_reg_offset); - } - - data->tmu_clear_irqs(data); -out: - return ret; } -static int exynos5440_tmu_initialize(struct platform_device *pdev) +static void exynos7_tmu_set_trip_temp(struct exynos_tmu_data *data, + int trip, u8 temp) { - struct exynos_tmu_data *data = platform_get_drvdata(pdev); - unsigned int trim_info = 0, con, rising_threshold; - int threshold_code; - int crit_temp = 0; + unsigned int reg_off, bit_off; + u32 th; - /* - * For exynos5440 soc triminfo value is swapped between TMU0 and - * TMU2, so the below logic is needed. - */ - switch (data->id) { - case 0: - trim_info = readl(data->base + EXYNOS5440_EFUSE_SWAP_OFFSET + - EXYNOS5440_TMU_S0_7_TRIM); - break; - case 1: - trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM); - break; - case 2: - trim_info = readl(data->base - EXYNOS5440_EFUSE_SWAP_OFFSET + - EXYNOS5440_TMU_S0_7_TRIM); - } - sanitize_temp_error(data, trim_info); + reg_off = ((7 - trip) / 2) * 4; + bit_off = ((8 - trip) % 2); - /* Write temperature code for rising and falling threshold */ - rising_threshold = readl(data->base + EXYNOS5440_TMU_S0_7_TH0); - rising_threshold = get_th_reg(data, rising_threshold, false); - writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH0); - writel(0, data->base + EXYNOS5440_TMU_S0_7_TH1); + th = readl(data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off); + th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); + th |= temp_to_code(data, temp) << (16 * bit_off); + writel(th, data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off); +} - data->tmu_clear_irqs(data); +static void exynos7_tmu_set_trip_hyst(struct exynos_tmu_data *data, + int trip, u8 temp, u8 hyst) +{ + unsigned int reg_off, bit_off; + u32 th; - /* if last threshold limit is also present */ - if (!data->tzd->ops->get_crit_temp(data->tzd, &crit_temp)) { - threshold_code = temp_to_code(data, crit_temp / MCELSIUS); - /* 5th level to be assigned in th2 reg */ - rising_threshold = - threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT; - writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH2); - con = readl(data->base + EXYNOS5440_TMU_S0_7_CTRL); - con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); - writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL); - } - /* Clear the PMIN in the common TMU register */ - if (!data->id) - writel(0, data->base_second + EXYNOS5440_TMU_PMIN); + reg_off = ((7 - trip) / 2) * 4; + bit_off = ((8 - trip) % 2); - return 0; + th = readl(data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off); + th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); + th |= temp_to_code(data, temp - hyst) << (16 * bit_off); + writel(th, data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off); } -static int exynos7_tmu_initialize(struct platform_device *pdev) +static void exynos7_tmu_initialize(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); - struct thermal_zone_device *tz = data->tzd; - struct exynos_tmu_platform_data *pdata = data->pdata; - unsigned int status, trim_info; - unsigned int rising_threshold = 0, falling_threshold = 0; - int ret = 0, threshold_code, i; - int temp, temp_hist; - unsigned int reg_off, bit_off; - - status = readb(data->base + EXYNOS_TMU_REG_STATUS); - if (!status) { - ret = -EBUSY; - goto out; - } + unsigned int trim_info; trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); - - data->temp_error1 = trim_info & EXYNOS7_TMU_TEMP_MASK; - if (!data->temp_error1 || - (pdata->min_efuse_value > data->temp_error1) || - (data->temp_error1 > pdata->max_efuse_value)) - data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK; - - /* Write temperature code for rising and falling threshold */ - for (i = (of_thermal_get_ntrips(tz) - 1); i >= 0; i--) { - /* - * On exynos7 there are 4 rising and 4 falling threshold - * registers (0x50-0x5c and 0x60-0x6c respectively). Each - * register holds the value of two threshold levels (at bit - * offsets 0 and 16). Based on the fact that there are atmost - * eight possible trigger levels, calculate the register and - * bit offsets where the threshold levels are to be written. - * - * e.g. EXYNOS7_THD_TEMP_RISE7_6 (0x50) - * [24:16] - Threshold level 7 - * [8:0] - Threshold level 6 - * e.g. EXYNOS7_THD_TEMP_RISE5_4 (0x54) - * [24:16] - Threshold level 5 - * [8:0] - Threshold level 4 - * - * and similarly for falling thresholds. - * - * Based on the above, calculate the register and bit offsets - * for rising/falling threshold levels and populate them. - */ - reg_off = ((7 - i) / 2) * 4; - bit_off = ((8 - i) % 2); - - tz->ops->get_trip_temp(tz, i, &temp); - temp /= MCELSIUS; - - tz->ops->get_trip_hyst(tz, i, &temp_hist); - temp_hist = temp - (temp_hist / MCELSIUS); - - /* Set 9-bit temperature code for rising threshold levels */ - threshold_code = temp_to_code(data, temp); - rising_threshold = readl(data->base + - EXYNOS7_THD_TEMP_RISE7_6 + reg_off); - rising_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); - rising_threshold |= threshold_code << (16 * bit_off); - writel(rising_threshold, - data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off); - - /* Set 9-bit temperature code for falling threshold levels */ - threshold_code = temp_to_code(data, temp_hist); - falling_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); - falling_threshold |= threshold_code << (16 * bit_off); - writel(falling_threshold, - data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off); - } - - data->tmu_clear_irqs(data); -out: - return ret; + sanitize_temp_error(data, trim_info); } static void exynos4210_tmu_control(struct platform_device *pdev, bool on) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct thermal_zone_device *tz = data->tzd; - unsigned int con, interrupt_en; + unsigned int con, interrupt_en = 0, i; con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); if (on) { - con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); - interrupt_en = - (of_thermal_is_trip_valid(tz, 3) - << EXYNOS_TMU_INTEN_RISE3_SHIFT) | - (of_thermal_is_trip_valid(tz, 2) - << EXYNOS_TMU_INTEN_RISE2_SHIFT) | - (of_thermal_is_trip_valid(tz, 1) - << EXYNOS_TMU_INTEN_RISE1_SHIFT) | - (of_thermal_is_trip_valid(tz, 0) - << EXYNOS_TMU_INTEN_RISE0_SHIFT); + for (i = 0; i < data->ntrip; i++) { + if (!of_thermal_is_trip_valid(tz, i)) + continue; + + interrupt_en |= + (1 << (EXYNOS_TMU_INTEN_RISE0_SHIFT + i * 4)); + } if (data->soc != SOC_ARCH_EXYNOS4210) interrupt_en |= interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; + + con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); } else { con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); - interrupt_en = 0; /* Disable all interrupts */ } + writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN); writel(con, data->base + EXYNOS_TMU_REG_CONTROL); } @@ -781,36 +603,25 @@ static void exynos5433_tmu_control(struct platform_device *pdev, bool on) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct thermal_zone_device *tz = data->tzd; - unsigned int con, interrupt_en, pd_det_en; + unsigned int con, interrupt_en = 0, pd_det_en, i; con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); if (on) { - con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); - interrupt_en = - (of_thermal_is_trip_valid(tz, 7) - << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | - (of_thermal_is_trip_valid(tz, 6) - << EXYNOS7_TMU_INTEN_RISE6_SHIFT) | - (of_thermal_is_trip_valid(tz, 5) - << EXYNOS7_TMU_INTEN_RISE5_SHIFT) | - (of_thermal_is_trip_valid(tz, 4) - << EXYNOS7_TMU_INTEN_RISE4_SHIFT) | - (of_thermal_is_trip_valid(tz, 3) - << EXYNOS7_TMU_INTEN_RISE3_SHIFT) | - (of_thermal_is_trip_valid(tz, 2) - << EXYNOS7_TMU_INTEN_RISE2_SHIFT) | - (of_thermal_is_trip_valid(tz, 1) - << EXYNOS7_TMU_INTEN_RISE1_SHIFT) | - (of_thermal_is_trip_valid(tz, 0) - << EXYNOS7_TMU_INTEN_RISE0_SHIFT); + for (i = 0; i < data->ntrip; i++) { + if (!of_thermal_is_trip_valid(tz, i)) + continue; + + interrupt_en |= + (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i)); + } interrupt_en |= interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; - } else { + + con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); + } else con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); - interrupt_en = 0; /* Disable all interrupts */ - } pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0; @@ -819,70 +630,31 @@ static void exynos5433_tmu_control(struct platform_device *pdev, bool on) writel(con, data->base + EXYNOS_TMU_REG_CONTROL); } -static void exynos5440_tmu_control(struct platform_device *pdev, bool on) -{ - struct exynos_tmu_data *data = platform_get_drvdata(pdev); - struct thermal_zone_device *tz = data->tzd; - unsigned int con, interrupt_en; - - con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL)); - - if (on) { - con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); - interrupt_en = - (of_thermal_is_trip_valid(tz, 3) - << EXYNOS5440_TMU_INTEN_RISE3_SHIFT) | - (of_thermal_is_trip_valid(tz, 2) - << EXYNOS5440_TMU_INTEN_RISE2_SHIFT) | - (of_thermal_is_trip_valid(tz, 1) - << EXYNOS5440_TMU_INTEN_RISE1_SHIFT) | - (of_thermal_is_trip_valid(tz, 0) - << EXYNOS5440_TMU_INTEN_RISE0_SHIFT); - interrupt_en |= - interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT; - } else { - con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); - interrupt_en = 0; /* Disable all interrupts */ - } - writel(interrupt_en, data->base + EXYNOS5440_TMU_S0_7_IRQEN); - writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL); -} - static void exynos7_tmu_control(struct platform_device *pdev, bool on) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct thermal_zone_device *tz = data->tzd; - unsigned int con, interrupt_en; + unsigned int con, interrupt_en = 0, i; con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); if (on) { - con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); - con |= (1 << EXYNOS7_PD_DET_EN_SHIFT); - interrupt_en = - (of_thermal_is_trip_valid(tz, 7) - << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | - (of_thermal_is_trip_valid(tz, 6) - << EXYNOS7_TMU_INTEN_RISE6_SHIFT) | - (of_thermal_is_trip_valid(tz, 5) - << EXYNOS7_TMU_INTEN_RISE5_SHIFT) | - (of_thermal_is_trip_valid(tz, 4) - << EXYNOS7_TMU_INTEN_RISE4_SHIFT) | - (of_thermal_is_trip_valid(tz, 3) - << EXYNOS7_TMU_INTEN_RISE3_SHIFT) | - (of_thermal_is_trip_valid(tz, 2) - << EXYNOS7_TMU_INTEN_RISE2_SHIFT) | - (of_thermal_is_trip_valid(tz, 1) - << EXYNOS7_TMU_INTEN_RISE1_SHIFT) | - (of_thermal_is_trip_valid(tz, 0) - << EXYNOS7_TMU_INTEN_RISE0_SHIFT); + for (i = 0; i < data->ntrip; i++) { + if (!of_thermal_is_trip_valid(tz, i)) + continue; + + interrupt_en |= + (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i)); + } interrupt_en |= interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; + + con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); + con |= (1 << EXYNOS7_PD_DET_EN_SHIFT); } else { con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT); - interrupt_en = 0; /* Disable all interrupts */ } writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN); @@ -896,6 +668,12 @@ static int exynos_get_temp(void *p, int *temp) if (!data || !data->tmu_read || !data->enabled) return -EINVAL; + else if (!data->enabled) + /* + * Called too early, probably + * from thermal_zone_of_sensor_register(). + */ + return -EAGAIN; mutex_lock(&data->lock); clk_enable(data->clk); @@ -919,10 +697,8 @@ static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val, if (temp) { temp /= MCELSIUS; - if (data->soc != SOC_ARCH_EXYNOS5440) { - val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT); - val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT); - } + val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT); + val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT); if (data->soc == SOC_ARCH_EXYNOS7) { val &= ~(EXYNOS7_EMUL_DATA_MASK << EXYNOS7_EMUL_DATA_SHIFT); @@ -963,16 +739,6 @@ static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data, writel(val, data->base + emul_con); } -static void exynos5440_tmu_set_emulation(struct exynos_tmu_data *data, - int temp) -{ - unsigned int val; - - val = readl(data->base + EXYNOS5440_TMU_S0_7_DEBUG); - val = get_emul_con_reg(data, val, temp); - writel(val, data->base + EXYNOS5440_TMU_S0_7_DEBUG); -} - static int exynos_tmu_set_emulation(void *drv_data, int temp) { struct exynos_tmu_data *data = drv_data; @@ -995,7 +761,6 @@ out: } #else #define exynos4412_tmu_set_emulation NULL -#define exynos5440_tmu_set_emulation NULL static int exynos_tmu_set_emulation(void *drv_data, int temp) { return -EINVAL; } #endif /* CONFIG_THERMAL_EMULATION */ @@ -1013,11 +778,6 @@ static int exynos4412_tmu_read(struct exynos_tmu_data *data) return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); } -static int exynos5440_tmu_read(struct exynos_tmu_data *data) -{ - return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP); -} - static int exynos7_tmu_read(struct exynos_tmu_data *data) { return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) & @@ -1028,20 +788,14 @@ static void exynos_tmu_work(struct work_struct *work) { struct exynos_tmu_data *data = container_of(work, struct exynos_tmu_data, irq_work); - unsigned int val_type; if (!IS_ERR(data->clk_sec)) clk_enable(data->clk_sec); - /* Find which sensor generated this interrupt */ - if (data->soc == SOC_ARCH_EXYNOS5440) { - val_type = readl(data->base_second + EXYNOS5440_TMU_IRQ_STATUS); - if (!((val_type >> data->id) & 0x1)) - goto out; - } if (!IS_ERR(data->clk_sec)) clk_disable(data->clk_sec); - exynos_report_trigger(data); + thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED); + mutex_lock(&data->lock); clk_enable(data->clk); @@ -1050,7 +804,6 @@ static void exynos_tmu_work(struct work_struct *work) clk_disable(data->clk); mutex_unlock(&data->lock); -out: enable_irq(data->irq); } @@ -1085,15 +838,6 @@ static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data) writel(val_irq, data->base + tmu_intclear); } -static void exynos5440_tmu_clear_irqs(struct exynos_tmu_data *data) -{ - unsigned int val_irq; - - val_irq = readl(data->base + EXYNOS5440_TMU_S0_7_IRQ); - /* clear the interrupts */ - writel(val_irq, data->base + EXYNOS5440_TMU_S0_7_IRQ); -} - static irqreturn_t exynos_tmu_irq(int irq, void *id) { struct exynos_tmu_data *data = id; @@ -1105,86 +849,41 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id) } static const struct of_device_id exynos_tmu_match[] = { - { .compatible = "samsung,exynos3250-tmu", }, - { .compatible = "samsung,exynos4210-tmu", }, - { .compatible = "samsung,exynos4412-tmu", }, - { .compatible = "samsung,exynos5250-tmu", }, - { .compatible = "samsung,exynos5260-tmu", }, - { .compatible = "samsung,exynos5420-tmu", }, - { .compatible = "samsung,exynos5420-tmu-ext-triminfo", }, - { .compatible = "samsung,exynos5433-tmu", }, - { .compatible = "samsung,exynos5440-tmu", }, - { .compatible = "samsung,exynos7-tmu", }, - { /* sentinel */ }, + { + .compatible = "samsung,exynos3250-tmu", + .data = (const void *)SOC_ARCH_EXYNOS3250, + }, { + .compatible = "samsung,exynos4210-tmu", + .data = (const void *)SOC_ARCH_EXYNOS4210, + }, { + .compatible = "samsung,exynos4412-tmu", + .data = (const void *)SOC_ARCH_EXYNOS4412, + }, { + .compatible = "samsung,exynos5250-tmu", + .data = (const void *)SOC_ARCH_EXYNOS5250, + }, { + .compatible = "samsung,exynos5260-tmu", + .data = (const void *)SOC_ARCH_EXYNOS5260, + }, { + .compatible = "samsung,exynos5420-tmu", + .data = (const void *)SOC_ARCH_EXYNOS5420, + }, { + .compatible = "samsung,exynos5420-tmu-ext-triminfo", + .data = (const void *)SOC_ARCH_EXYNOS5420_TRIMINFO, + }, { + .compatible = "samsung,exynos5433-tmu", + .data = (const void *)SOC_ARCH_EXYNOS5433, + }, { + .compatible = "samsung,exynos7-tmu", + .data = (const void *)SOC_ARCH_EXYNOS7, + }, + { }, }; MODULE_DEVICE_TABLE(of, exynos_tmu_match); -static int exynos_of_get_soc_type(struct device_node *np) -{ - if (of_device_is_compatible(np, "samsung,exynos3250-tmu")) - return SOC_ARCH_EXYNOS3250; - else if (of_device_is_compatible(np, "samsung,exynos4210-tmu")) - return SOC_ARCH_EXYNOS4210; - else if (of_device_is_compatible(np, "samsung,exynos4412-tmu")) - return SOC_ARCH_EXYNOS4412; - else if (of_device_is_compatible(np, "samsung,exynos5250-tmu")) - return SOC_ARCH_EXYNOS5250; - else if (of_device_is_compatible(np, "samsung,exynos5260-tmu")) - return SOC_ARCH_EXYNOS5260; - else if (of_device_is_compatible(np, "samsung,exynos5420-tmu")) - return SOC_ARCH_EXYNOS5420; - else if (of_device_is_compatible(np, - "samsung,exynos5420-tmu-ext-triminfo")) - return SOC_ARCH_EXYNOS5420_TRIMINFO; - else if (of_device_is_compatible(np, "samsung,exynos5433-tmu")) - return SOC_ARCH_EXYNOS5433; - else if (of_device_is_compatible(np, "samsung,exynos5440-tmu")) - return SOC_ARCH_EXYNOS5440; - else if (of_device_is_compatible(np, "samsung,exynos7-tmu")) - return SOC_ARCH_EXYNOS7; - - return -EINVAL; -} - -static int exynos_of_sensor_conf(struct device_node *np, - struct exynos_tmu_platform_data *pdata) -{ - u32 value; - int ret; - - of_node_get(np); - - ret = of_property_read_u32(np, "samsung,tmu_gain", &value); - pdata->gain = (u8)value; - of_property_read_u32(np, "samsung,tmu_reference_voltage", &value); - pdata->reference_voltage = (u8)value; - of_property_read_u32(np, "samsung,tmu_noise_cancel_mode", &value); - pdata->noise_cancel_mode = (u8)value; - - of_property_read_u32(np, "samsung,tmu_efuse_value", - &pdata->efuse_value); - of_property_read_u32(np, "samsung,tmu_min_efuse_value", - &pdata->min_efuse_value); - of_property_read_u32(np, "samsung,tmu_max_efuse_value", - &pdata->max_efuse_value); - - of_property_read_u32(np, "samsung,tmu_first_point_trim", &value); - pdata->first_point_trim = (u8)value; - of_property_read_u32(np, "samsung,tmu_second_point_trim", &value); - pdata->second_point_trim = (u8)value; - of_property_read_u32(np, "samsung,tmu_default_temp_offset", &value); - pdata->default_temp_offset = (u8)value; - - of_property_read_u32(np, "samsung,tmu_cal_type", &pdata->cal_type); - - of_node_put(np); - return 0; -} - static int exynos_map_dt_data(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); - struct exynos_tmu_platform_data *pdata; struct resource res; if (!data || !pdev->dev.of_node) @@ -1211,23 +910,22 @@ static int exynos_map_dt_data(struct platform_device *pdev) return -EADDRNOTAVAIL; } - pdata = devm_kzalloc(&pdev->dev, - sizeof(struct exynos_tmu_platform_data), - GFP_KERNEL); - if (!pdata) - return -ENOMEM; - - exynos_of_sensor_conf(pdev->dev.of_node, pdata); - data->pdata = pdata; - data->soc = exynos_of_get_soc_type(pdev->dev.of_node); + data->soc = (enum soc_type)of_device_get_match_data(&pdev->dev); switch (data->soc) { case SOC_ARCH_EXYNOS4210: + data->tmu_set_trip_temp = exynos4210_tmu_set_trip_temp; + data->tmu_set_trip_hyst = exynos4210_tmu_set_trip_hyst; data->tmu_initialize = exynos4210_tmu_initialize; data->tmu_control = exynos4210_tmu_control; data->tmu_read = exynos4210_tmu_read; data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; data->ntrip = 4; + data->gain = 15; + data->reference_voltage = 7; + data->efuse_value = 55; + data->min_efuse_value = 40; + data->max_efuse_value = 100; break; case SOC_ARCH_EXYNOS3250: case SOC_ARCH_EXYNOS4412: @@ -1235,48 +933,69 @@ static int exynos_map_dt_data(struct platform_device *pdev) case SOC_ARCH_EXYNOS5260: case SOC_ARCH_EXYNOS5420: case SOC_ARCH_EXYNOS5420_TRIMINFO: + data->tmu_set_trip_temp = exynos4412_tmu_set_trip_temp; + data->tmu_set_trip_hyst = exynos4412_tmu_set_trip_hyst; data->tmu_initialize = exynos4412_tmu_initialize; data->tmu_control = exynos4210_tmu_control; data->tmu_read = exynos4412_tmu_read; data->tmu_set_emulation = exynos4412_tmu_set_emulation; data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; data->ntrip = 4; + data->gain = 8; + data->reference_voltage = 16; + data->efuse_value = 55; + if (data->soc != SOC_ARCH_EXYNOS5420 && + data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO) + data->min_efuse_value = 40; + else + data->min_efuse_value = 0; + data->max_efuse_value = 100; break; case SOC_ARCH_EXYNOS5433: + data->tmu_set_trip_temp = exynos5433_tmu_set_trip_temp; + data->tmu_set_trip_hyst = exynos5433_tmu_set_trip_hyst; data->tmu_initialize = exynos5433_tmu_initialize; data->tmu_control = exynos5433_tmu_control; data->tmu_read = exynos4412_tmu_read; data->tmu_set_emulation = exynos4412_tmu_set_emulation; data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; data->ntrip = 8; - break; - case SOC_ARCH_EXYNOS5440: - data->tmu_initialize = exynos5440_tmu_initialize; - data->tmu_control = exynos5440_tmu_control; - data->tmu_read = exynos5440_tmu_read; - data->tmu_set_emulation = exynos5440_tmu_set_emulation; - data->tmu_clear_irqs = exynos5440_tmu_clear_irqs; - data->ntrip = 4; + data->gain = 8; + if (res.start == EXYNOS5433_G3D_BASE) + data->reference_voltage = 23; + else + data->reference_voltage = 16; + data->efuse_value = 75; + data->min_efuse_value = 40; + data->max_efuse_value = 150; break; case SOC_ARCH_EXYNOS7: + data->tmu_set_trip_temp = exynos7_tmu_set_trip_temp; + data->tmu_set_trip_hyst = exynos7_tmu_set_trip_hyst; data->tmu_initialize = exynos7_tmu_initialize; data->tmu_control = exynos7_tmu_control; data->tmu_read = exynos7_tmu_read; data->tmu_set_emulation = exynos4412_tmu_set_emulation; data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; data->ntrip = 8; + data->gain = 9; + data->reference_voltage = 17; + data->efuse_value = 75; + data->min_efuse_value = 15; + data->max_efuse_value = 100; break; default: dev_err(&pdev->dev, "Platform not supported\n"); return -EINVAL; } + data->cal_type = TYPE_ONE_POINT_TRIMMING; + /* * Check if the TMU shares some registers and then try to map the * memory of common registers. */ - if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO && - data->soc != SOC_ARCH_EXYNOS5440) + if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO) return 0; if (of_address_to_resource(pdev->dev.of_node, 1, &res)) { diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h deleted file mode 100644 index 5149c2a3030c..000000000000 --- a/drivers/thermal/samsung/exynos_tmu.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * exynos_tmu.h - Samsung EXYNOS TMU (Thermal Management Unit) - * - * Copyright (C) 2011 Samsung Electronics - * Donggeun Kim <dg77.kim@samsung.com> - * Amit Daniel Kachhap <amit.daniel@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _EXYNOS_TMU_H -#define _EXYNOS_TMU_H -#include <linux/cpu_cooling.h> -#include <dt-bindings/thermal/thermal_exynos.h> - -enum soc_type { - SOC_ARCH_EXYNOS3250 = 1, - SOC_ARCH_EXYNOS4210, - SOC_ARCH_EXYNOS4412, - SOC_ARCH_EXYNOS5250, - SOC_ARCH_EXYNOS5260, - SOC_ARCH_EXYNOS5420, - SOC_ARCH_EXYNOS5420_TRIMINFO, - SOC_ARCH_EXYNOS5433, - SOC_ARCH_EXYNOS5440, - SOC_ARCH_EXYNOS7, -}; - -/** - * struct exynos_tmu_platform_data - * @gain: gain of amplifier in the positive-TC generator block - * 0 < gain <= 15 - * @reference_voltage: reference voltage of amplifier - * in the positive-TC generator block - * 0 < reference_voltage <= 31 - * @noise_cancel_mode: noise cancellation mode - * 000, 100, 101, 110 and 111 can be different modes - * @type: determines the type of SOC - * @efuse_value: platform defined fuse value - * @min_efuse_value: minimum valid trimming data - * @max_efuse_value: maximum valid trimming data - * @default_temp_offset: default temperature offset in case of no trimming - * @cal_type: calibration type for temperature - * - * This structure is required for configuration of exynos_tmu driver. - */ -struct exynos_tmu_platform_data { - u8 gain; - u8 reference_voltage; - u8 noise_cancel_mode; - - u32 efuse_value; - u32 min_efuse_value; - u32 max_efuse_value; - u8 first_point_trim; - u8 second_point_trim; - u8 default_temp_offset; - - enum soc_type type; - u32 cal_type; -}; - -#endif /* _EXYNOS_TMU_H */ diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c index 455b58ce2652..207a79838643 100644 --- a/drivers/thermal/tegra/soctherm.c +++ b/drivers/thermal/tegra/soctherm.c @@ -241,31 +241,6 @@ struct tegra_soctherm { }; /** - * clk_writel() - writes a value to a CAR register - * @ts: pointer to a struct tegra_soctherm - * @v: the value to write - * @reg: the register offset - * - * Writes @v to @reg. No return value. - */ -static inline void clk_writel(struct tegra_soctherm *ts, u32 value, u32 reg) -{ - writel(value, (ts->clk_regs + reg)); -} - -/** - * clk_readl() - reads specified register from CAR IP block - * @ts: pointer to a struct tegra_soctherm - * @reg: register address to be read - * - * Return: the value of the register - */ -static inline u32 clk_readl(struct tegra_soctherm *ts, u32 reg) -{ - return readl(ts->clk_regs + reg); -} - -/** * ccroc_writel() - writes a value to a CCROC register * @ts: pointer to a struct tegra_soctherm * @v: the value to write @@ -926,7 +901,7 @@ static int throt_set_cdev_state(struct thermal_cooling_device *cdev, return 0; } -static struct thermal_cooling_device_ops throt_cooling_ops = { +static const struct thermal_cooling_device_ops throt_cooling_ops = { .get_max_state = throt_get_cdev_max_state, .get_cur_state = throt_get_cdev_cur_state, .set_cur_state = throt_set_cdev_state, @@ -1207,9 +1182,9 @@ static void tegra_soctherm_throttle(struct device *dev) } else { writel(v, ts->regs + THROT_GLOBAL_CFG); - v = clk_readl(ts, CAR_SUPER_CCLKG_DIVIDER); + v = readl(ts->clk_regs + CAR_SUPER_CCLKG_DIVIDER); v = REG_SET_MASK(v, CDIVG_USE_THERM_CONTROLS_MASK, 1); - clk_writel(ts, v, CAR_SUPER_CCLKG_DIVIDER); + writel(v, ts->clk_regs + CAR_SUPER_CCLKG_DIVIDER); } /* initialize stats collection */ diff --git a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c index cd9a304fb571..6ac037098b52 100644 --- a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c @@ -310,7 +310,7 @@ omap5430_adc_to_temp[ 119800, 120200, 120600, 121000, 121400, 121800, 122400, 122600, 123000, 123400, /* Index 940 - 945 */ - 123800, 1242000, 124600, 124900, 125000, 125000, + 123800, 124200, 124600, 124900, 125000, 125000, }; /* OMAP54xx ES2.0 data */ diff --git a/drivers/thermal/uniphier_thermal.c b/drivers/thermal/uniphier_thermal.c index 95704732f760..55477d74d591 100644 --- a/drivers/thermal/uniphier_thermal.c +++ b/drivers/thermal/uniphier_thermal.c @@ -365,6 +365,10 @@ static const struct of_device_id uniphier_tm_dt_ids[] = { .compatible = "socionext,uniphier-ld20-thermal", .data = &uniphier_ld20_tm_data, }, + { + .compatible = "socionext,uniphier-pxs3-thermal", + .data = &uniphier_ld20_tm_data, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, uniphier_tm_dt_ids); |