diff options
| author | Denys Drozdov <denys.drozdov@toradex.com> | 2021-03-04 16:20:15 +0200 |
|---|---|---|
| committer | Denys Drozdov <denys.drozdov@toradex.com> | 2021-03-04 16:22:00 +0200 |
| commit | 4f4c168a0d96e11cb3b4fe59416f49c0d40c406e (patch) | |
| tree | ac4b85b6c3d533960ea4280dfae90dd0331eeccc | |
| parent | acb4b349a03770e5016b6af9bc0b1c676766c947 (diff) | |
ARM: dts: colibri-imx7: Disable Atmel TX nodes for Eval. Board
Keep Atmel touchscreen adapter node disabled and PWM2, PWM3 enabled
Related-to: ELB-3582
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
| -rw-r--r-- | arch/arm/boot/dts/imx7d-colibri-eval-v3.dts | 11 |
1 files changed, 8 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts index 0921aa8f9151..7383572d5b10 100644 --- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts @@ -14,20 +14,25 @@ "fsl,imx7d"; }; + +/* + * The PCAP uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. + * So if you enable following PCAP controller, disable pwm2/pwm3 first. + */ &atmel_mxt_ts { pinctrl-0 = <&pinctrl_atmel_adapter>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM_28, INT */ reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; /* SODIMM_30, RST */ - status = "okay"; + status = "disabled"; }; &pwm2 { - status = "disabled"; + status = "okay"; }; &pwm3 { - status = "disabled"; + status = "okay"; }; &usbotg2 { |