summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorCharles Keepax <ckeepax@opensource.cirrus.com>2018-11-20 14:16:28 +0000
committerMark Brown <broonie@kernel.org>2018-11-20 15:45:57 +0000
commit9e6d9c9b737326d880e52ebe5a845f4afde378ea (patch)
treeb568531f2c5075b89e3a5b01e8f308d189f911eb
parentd90acbc4e3ddd72ccccebcaf9cdc7ed8da669132 (diff)
regulator: lochnagar: Add initial binding documentation
Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-rw-r--r--Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt82
1 files changed, 82 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
new file mode 100644
index 000000000000..91974e6ee251
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
@@ -0,0 +1,82 @@
+Cirrus Logic Lochnagar Audio Development Board
+
+Lochnagar is an evaluation and development board for Cirrus Logic
+Smart CODEC and Amp devices. It allows the connection of most Cirrus
+Logic devices on mini-cards, as well as allowing connection of
+various application processor systems to provide a full evaluation
+platform. Audio system topology, clocking and power can all be
+controlled through the Lochnagar, allowing the device under test
+to be used in a variety of possible use cases.
+
+This binding document describes the binding for the regulator portion
+of the driver.
+
+Also see these documents for generic binding information:
+ [1] Regulator: ../regulator/regulator.txt
+
+This binding must be part of the Lochnagar MFD binding:
+ [2] ../mfd/cirrus,lochnagar.txt
+
+Optional sub-nodes:
+
+ - VDDCORE : Initialisation data for the VDDCORE regulator, which
+ supplies the CODECs digital core if it has no build regulator for that
+ purpose.
+ Required Properties:
+ - compatible : One of the following strings:
+ "cirrus,lochnagar2-vddcore"
+ - SYSVDD-supply: Primary power supply for the Lochnagar.
+
+ - MICVDD : Initialisation data for the MICVDD regulator, which
+ supplies the CODECs MICVDD.
+ Required Properties:
+ - compatible : One of the following strings:
+ "cirrus,lochnagar2-micvdd"
+ - SYSVDD-supply: Primary power supply for the Lochnagar.
+
+ - MIC1VDD, MIC2VDD : Initialisation data for the MICxVDD supplies.
+ Required Properties:
+ - compatible : One of the following strings:
+ "cirrus,lochnagar2-mic1vdd", "cirrus,lochnagar2-mic2vdd"
+ Optional Properties:
+ - cirrus,micbias-input : A property selecting which of the CODEC
+ minicard micbias outputs should be used, valid values are 1 - 4.
+ - MICBIAS1-supply, MICBIAS2-supply: Regulator supplies for the
+ MICxVDD outputs, supplying the digital microphones, normally
+ supplied from the attached CODEC.
+
+ - VDD1V8 : Recommended fixed regulator for the VDD1V8 regulator, which supplies the
+ CODECs analog and 1.8V digital supplies.
+ Required Properties:
+ - compatible : Should be set to "regulator-fixed"
+ - regulator-min-microvolt : Should be set to 1.8V
+ - regulator-max-microvolt : Should be set to 1.8V
+ - regulator-boot-on
+ - regulator-always-on
+ - vin-supply : Should be set to same supply as SYSVDD
+
+Example:
+
+lochnagar {
+ lochnagar-micvdd: MICVDD {
+ compatible = "cirrus,lochnagar2-micvdd";
+
+ SYSVDD-supply = <&wallvdd>;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ lochnagar-vdd1v8: VDD1V8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDD1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+
+ vin-supply = <&wallvdd>;
+ };
+};
+