summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPaul Walmsley <paul@booyaka.com>2005-12-21 14:28:06 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2005-12-21 14:46:34 -0800
commit28120be5d6830cd7c7777d8bf570bdb20abef58a (patch)
treea7aecedc557ae1c5ae4b4d7fa21a1eed879c842e
parent23f9b317e0ba4fbc5fc9524275d0105fa87e2027 (diff)
[PATCH] USB Storage: Force starget->scsi_level in usb-storage scsiglue.c
When the usb-storage module forces sdev->scsi_level to SCSI_2, it should also force starget->scsi_level to the same value. Otherwise, the SCSI layer may attempt to issue SCSI-3 commands to the device, such as REPORT LUNS, which it cannot handle. This can prevent the device from working with Linux. The AMS Venus DS3 DS2316SU2S SATA-to-SATA+USB enclosure, based on the Oxford Semiconductor OXU921S chip, requires this patch to function correctly on Linux. The enclosure reports a SCSI-3 SPC-2 command set level, but does not correctly handle the REPORT LUNS SCSI command - probably due to a bug in its firmware. It seems likely that other USB storage enclosures with similar bugs will also benefit from this patch. Tony Lindgren <tony@atomide.com> collaborated in the development of this patch. Signed-off-by: Paul Walmsley <paul@booyaka.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-rw-r--r--drivers/usb/storage/scsiglue.c4
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 4837524eada7..4ef5527028c5 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -109,7 +109,7 @@ static int slave_configure(struct scsi_device *sdev)
* data comes from.
*/
if (sdev->scsi_level < SCSI_2)
- sdev->scsi_level = SCSI_2;
+ sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
/* According to the technical support people at Genesys Logic,
* devices using their chips have problems transferring more than
@@ -162,7 +162,7 @@ static int slave_configure(struct scsi_device *sdev)
* a Get-Max-LUN request, we won't lose much by setting the
* revision level down to 2. The only devices that would be
* affected are those with sparse LUNs. */
- sdev->scsi_level = SCSI_2;
+ sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
/* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
* Hardware Error) when any low-level error occurs,