Merge tag 'mmc-v4.1' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson: "MMC core: - Add support for marking HPI as broken through devicetree - Enable runtime PM management of host devices - Remove the ->enable|disable() callbacks - Restructure code and cleanups - Refreshed some of the MMC sections in MAINTAINERS MMC host: - dw_mmc: HS400 mode support - dw_mmc: Add the cmd11 timer to detect a timeout - dw_mmc: Endian agnostic IO accessors - dw_mmc: Bugfixes - sh_mmcif: Add exclusion between cmd and interrupt - omap_hsmmc: Hibernation support - omap_hsmmc: Rework and simplify cover/card detect - omap_hsmmc: Stop using ->enable|disable() callbacks - atmel-mci: Endian agnostic IO - sunxi: Enable MMC_CAP_SDIO_IRQ - sdhci-st: Add support for the stih407 family silicon - sdhci-st: UHS card support in SDR104 mode - sdhci-st: HS200 mode support - sdhci-esdhc-imx: Use common mmc DT parser - sdhci-of-arasan: Use common mmc DT parser - sdhci-iproc: Add new driver for Broadcom IPROC SDHCI controller - sdhci-tegra: Convert to GPIO descriptors - sdhci-tegra: Optmize write_w path for tegra114 and later - sdhci-sirf: Update tuning procedure - sdhci: Fix card presence logic - sdhci: Cleanups and consolidation" * tag 'mmc-v4.1' of git://git.linaro.org/people/ulf.hansson/mmc: (79 commits) mmc: sdhci-st: Update ST SDHCI binding documentation. mmc: sdhci-st: Update the quirks for this controller. mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function. mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue registers. mmc: sdhci-st: Add delay management functions for top registers (eMMC). mmc: sdhci-st: Add support for de-asserting reset signal and top regs resource mmc: sdhci-st: Add macros for register offsets and bitfields for mmcss glue regs mmc: sdhci-esdhc-imx: Call mmc_of_parse() mmc: dw_mmc: Add locking around cmd11 timer mmc: dw_mmc: Add a return in an unexpected cmd11 timeout mmc: dw_mmc: Increase cmd11 timeout to 500ms mmc: dw_mmc: fix fifo ordering in big endian mmc: dw_mmc: change idmac descriptor files to __le32 mmc: dw_mmc: make IO accessors endian agnostic mmc: core: Convert the error field in struct mmc_command|data into an int mmc: sdhci-of-arasan: Call OF parsing for MMC mmc: sdhci-pci: fix 64 BIT DMA quirks for rtsx mmc: Add support for marking hpi as broken through devicetree mmc: sdhci-tegra: convert to use GPIO descriptors mmc: omap_hsmmc: use generic slot-gpio isr to manage card detect pin ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2015-04-13 14:53:03 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2015-04-13 14:53:03 -0700
commit: 8d9095c667a185c8e2449632343a2b6c65ae58f1 (patch)
tree: 738cdc0e1e5c96738c31ea327ac0d741349d3757
parent: 1a370f4cd95e056d55ef5bf1a183880e70195e59 (diff)
parent: 69f0fb2a592fc9ebc5e3e55178055d1cff31d479 (diff)
55 files changed, 1692 insertions, 892 deletions
diff --git a/CREDITS b/CREDITS
index 96935df0b6fe..843e17647f3b 100644
--- a/CREDITS
+++ b/CREDITS
@@ -187,6 +187,10 @@ N: Krishna Balasubramanian
 E: balasub@cis.ohio-state.edu
 D: Wrote SYS V IPC (part of standard kernel since 0.99.10)
 
+N: Chris Ball
+E: chris@printf.net
+D: Former maintainer of the MMC/SD/SDIO subsystem.
+
 N: Dario Ballabio
 E: ballabio_dario@emc.com
 E: dario.ballabio@tiscalinet.it
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
new file mode 100644
index 000000000000..72cc9cc95880
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
@@ -0,0 +1,23 @@
+Broadcom IPROC SDHCI controller
+
+This file documents differences between the core properties described
+by mmc.txt and the properties that represent the IPROC SDHCI controller.
+
+Required properties:
+- compatible : Should be "brcm,sdhci-iproc-cygnus".
+- clocks : The clock feeding the SDHCI controller.
+
+Optional properties:
+  - sdhci,auto-cmd12: specifies that controller should use auto CMD12.
+
+Example:
+
+sdhci0: sdhci@0x18041000 {
+	compatible = "brcm,sdhci-iproc-cygnus";
+	reg = <0x18041000 0x100>;
+	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+	bus-width = <4>;
+	sdhci,auto-cmd12;
+	no-1-8-v;
+};
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index ee4fc0576c7d..aad98442788b 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -36,6 +36,8 @@ Required Properties:
   in transmit mode and CIU clock phase shift value in receive mode for double
   data rate mode operation. Refer notes below for the order of the cells and the
   valid values.
+* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase
+  shift value for hs400 mode operation.
 
   Notes for the sdr-timing and ddr-timing values:
 
@@ -50,6 +52,9 @@ Required Properties:
       - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
         phase shift clocks should be 0.
 
+* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode
+  (Latency value for delay line in Read path)
+
 Required properties for a slot (Deprecated - Recommend to use one slot per host):
 
 * gpios: specifies a list of gpios used for command, clock and data bus. The
@@ -82,5 +87,7 @@ Example:
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		samsung,dw-mshc-hs400-timing = <0 2>;
+		samsung,read-strobe-delay = <90>;
 		bus-width = <8>;
 	};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index 9046ba06c47a..415c5575cbf7 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -17,6 +17,10 @@ Optional properties:
   to select a proper data sampling window in case the clock quality is not good
   due to signal path is too long on the board. Please refer to eSDHC/uSDHC
   chapter, DLL (Delay Line) section in RM for details.
+- voltage-ranges : Specify the voltage range in case there are software
+  transparent level shifters on the outputs of the controller. Two cells are
+  required, first cell specifies minimum slot voltage (mV), second cell
+  specifies maximum slot voltage (mV). Several ranges could be specified.
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.txt b/Documentation/devicetree/bindings/mmc/mmc-card.txt
new file mode 100644
index 000000000000..a70fcd65b9ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-card.txt
@@ -0,0 +1,31 @@
+mmc-card / eMMC bindings
+------------------------
+
+This documents describes the devicetree bindings for a mmc-host controller
+child node describing a mmc-card / an eMMC, see "Use of Function subnodes"
+in mmc.txt
+
+Required properties:
+-compatible : Must be "mmc-card"
+-reg        : Must be <0>
+
+Optional properties:
+-broken-hpi : Use this to indicate that the mmc-card has a broken hpi
+              implementation, and that hpi should not be used
+
+Example:
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
index 7527db447a35..18d950df2749 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -5,20 +5,62 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties
 used by the sdhci-st driver.
 
 Required properties:
-- compatible :  Must be "st,sdhci"
-- clock-names : Should be "mmc"
-                See: Documentation/devicetree/bindings/resource-names.txt
-- clocks :      Phandle of the clock used by the sdhci controler
-                See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- compatible:		Must be "st,sdhci" and it can be compatible to "st,sdhci-stih407"
+			to set the internal glue logic used for configuring the MMC
+			subsystem (mmcss) inside the FlashSS (available in STiH407 SoC
+			family).
+
+- clock-names:		Should be "mmc".
+			See: Documentation/devicetree/bindings/resource-names.txt
+- clocks:		Phandle to the clock.
+			See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+- interrupts:		One mmc interrupt should be described here.
+- interrupt-names:	Should be "mmcirq".
+
+- pinctrl-names:	A pinctrl state names "default" must be defined.
+- pinctrl-0:		Phandle referencing pin configuration of the sd/emmc controller.
+			See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+
+- reg:			This must provide the host controller base address and it can also
+			contain the FlashSS Top register for TX/RX delay used by the driver
+			to configure DLL inside the flashSS, if so reg-names must also be
+			specified.
 
 Optional properties:
-- non-removable: non-removable slot
-                 See: Documentation/devicetree/bindings/mmc/mmc.txt
-- bus-width: Number of data lines
-                 See: Documentation/devicetree/bindings/mmc/mmc.txt
+- reg-names:		Should be "mmc" and "top-mmc-delay". "top-mmc-delay" is optional
+			for eMMC on stih407 family silicon to configure DLL inside FlashSS.
+
+- non-removable:	Non-removable slot. Also used for configuring mmcss in STiH407 SoC
+			family.
+			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- bus-width:		Number of data lines.
+			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- max-frequency: 	Can be 200MHz, 100Mz or 50MHz (default) and used for
+			configuring the CCONFIG3 in the mmcss.
+			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- resets:		Phandle and reset specifier pair to softreset line of HC IP.
+			See: Documentation/devicetree/bindings/reset/reset.txt
+
+- vqmmc-supply:		Phandle to the regulator dt node, mentioned as the vcc/vdd
+			supply in eMMC/SD specs.
+
+- sd-uhs--sdr50:	To enable the SDR50 in the mmcss.
+			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- sd-uhs-sdr104:	To enable the SDR104 in the mmcss.
+			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- sd-uhs-ddr50:		To enable the DDR50 in the mmcss.
+			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
 
 Example:
 
+/* Example stih416e eMMC configuration */
+
 mmc0: sdhci@fe81e000 {
 	compatible	= "st,sdhci";
 	status		= "disabled";
@@ -29,5 +71,43 @@ mmc0: sdhci@fe81e000 {
 	pinctrl-0	= <&pinctrl_mmc0>;
 	clock-names	= "mmc";
 	clocks		= <&clk_s_a1_ls 1>;
-	bus-width       = <8>
+	bus-width	= <8>
+
+/* Example SD stih407 family configuration */
+
+mmc1: sdhci@09080000 {
+	compatible	= "st,sdhci-stih407", "st,sdhci";
+	status		= "disabled";
+	reg		= <0x09080000 0x7ff>;
+	reg-names	= "mmc";
+	interrupts	= <GIC_SPI 90 IRQ_TYPE_NONE>;
+	interrupt-names	= "mmcirq";
+	pinctrl-names	= "default";
+	pinctrl-0	= <&pinctrl_sd1>;
+	clock-names	= "mmc";
+	clocks		= <&clk_s_c0_flexgen CLK_MMC_1>;
+	resets		= <&softreset STIH407_MMC1_SOFTRESET>;
+	bus-width	= <4>;
+};
+
+/* Example eMMC stih407 family configuration */
+
+mmc0: sdhci@09060000 {
+	compatible	= "st,sdhci-stih407", "st,sdhci";
+	status		= "disabled";
+	reg		= <0x09060000 0x7ff>, <0x9061008 0x20>;
+	reg-names	= "mmc", "top-mmc-delay";
+	interrupts	= <GIC_SPI 92 IRQ_TYPE_NONE>;
+	interrupt-names	= "mmcirq";
+	pinctrl-names	= "default";
+	pinctrl-0	= <&pinctrl_mmc0>;
+	clock-names	= "mmc";
+	clocks		= <&clk_s_c0_flexgen CLK_MMC_0>;
+	vqmmc-supply	= <&vmmc_reg>;
+	max-frequency	= <200000000>;
+	bus-width	= <8>;
+	non-removable;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
 };
diff --git a/MAINTAINERS b/MAINTAINERS
index b84686826b23..8d2ee8e010a1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6566,10 +6566,8 @@ F:	drivers/mfd/
 F:	include/linux/mfd/
 
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
-M:	Chris Ball <chris@printf.net>
 M:	Ulf Hansson <ulf.hansson@linaro.org>
 L:	linux-mmc@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
 T:	git git://git.linaro.org/people/ulf.hansson/mmc.git
 S:	Maintained
 F:	drivers/mmc/
@@ -8670,10 +8668,8 @@ S:	Maintained
 F:	drivers/mmc/host/sdricoh_cs.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-M:	Chris Ball <chris@printf.net>
 L:	linux-mmc@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
-S:	Maintained
+S:	Orphan
 F:	drivers/mmc/host/sdhci.*
 F:	drivers/mmc/host/sdhci-pltfm.[ch]
 
@@ -8689,18 +8685,12 @@ F:	include/linux/seccomp.h
 K:	\bsecure_computing
 K:	\bTIF_SECCOMP\b
 
-SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
-M:	Anton Vorontsov <anton@enomsg.org>
-L:	linuxppc-dev@lists.ozlabs.org
-L:	linux-mmc@vger.kernel.org
-S:	Maintained
-F:	drivers/mmc/host/sdhci-pltfm.[ch]
-
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
 M:	Ben Dooks <ben-linux@fluff.org>
+M:	Jaehoon Chung <jh80.chung@samsung.com>
 L:	linux-mmc@vger.kernel.org
 S:	Maintained
-F:	drivers/mmc/host/sdhci-s3c.c
+F:	drivers/mmc/host/sdhci-s3c*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
 M:	Viresh Kumar <viresh.linux@gmail.com>
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index dc6e79c4484a..9a8611ab5dfa 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -150,9 +150,13 @@ static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
 static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
 				  *mmc_controller, int controller_nr)
 {
-	if (gpio_is_valid(mmc_controller->switch_pin) &&
-	    (mmc_controller->switch_pin < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->switch_pin,
+	if (gpio_is_valid(mmc_controller->gpio_cd) &&
+	    (mmc_controller->gpio_cd < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->gpio_cd,
+				   OMAP_PIN_INPUT_PULLUP);
+	if (gpio_is_valid(mmc_controller->gpio_cod) &&
+	    (mmc_controller->gpio_cod < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->gpio_cod,
 				   OMAP_PIN_INPUT_PULLUP);
 	if (gpio_is_valid(mmc_controller->gpio_wp) &&
 	    (mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES))
@@ -250,15 +254,20 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	mmc->internal_clock = !c->ext_clock;
 	mmc->reg_offset = 0;
 
-	mmc->switch_pin = c->gpio_cd;
+	if (c->cover_only) {
+		/* detect if mobile phone cover removed */
+		mmc->gpio_cd = -EINVAL;
+		mmc->gpio_cod = c->gpio_cd;
+	} else {
+		/* card detect pin on the mmc socket itself */
+		mmc->gpio_cd = c->gpio_cd;
+		mmc->gpio_cod = -EINVAL;
+	}
 	mmc->gpio_wp = c->gpio_wp;
 
 	mmc->remux = c->remux;
 	mmc->init_card = c->init_card;
 
-	if (c->cover_only)
-		mmc->cover = 1;
-
 	if (c->nonremovable)
 		mmc->nonremovable = 1;
 
@@ -358,7 +367,15 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
 		if (!mmc_pdata)
 			continue;
 
-		mmc_pdata->switch_pin = c->gpio_cd;
+		if (c->cover_only) {
+			/* detect if mobile phone cover removed */
+			mmc_pdata->gpio_cd = -EINVAL;
+			mmc_pdata->gpio_cod = c->gpio_cd;
+		} else {
+			/* card detect pin on the mmc socket itself */
+			mmc_pdata->gpio_cd = c->gpio_cd;
+			mmc_pdata->gpio_cod = -EINVAL;
+		}
 		mmc_pdata->gpio_wp = c->gpio_wp;
 
 		res = omap_device_register(pdev);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 23f10f72e5f3..c296bc098fe2 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -897,6 +897,7 @@ int __mmc_claim_host(struct mmc_host *host, atomic_t *abort)
 	DECLARE_WAITQUEUE(wait, current);
 	unsigned long flags;
 	int stop;
+	bool pm = false;
 
 	might_sleep();
 
@@ -916,15 +917,18 @@ int __mmc_claim_host(struct mmc_host *host, atomic_t *abort)
 		host->claimed = 1;
 		host->claimer = current;
 		host->claim_cnt += 1;
+		if (host->claim_cnt == 1)
+			pm = true;
 	} else
 		wake_up(&host->wq);
 	spin_unlock_irqrestore(&host->lock, flags);
 	remove_wait_queue(&host->wq, &wait);
-	if (host->ops->enable && !stop && host->claim_cnt == 1)
-		host->ops->enable(host);
+
+	if (pm)
+		pm_runtime_get_sync(mmc_dev(host));
+
 	return stop;
 }
-
 EXPORT_SYMBOL(__mmc_claim_host);
 
 /**
@@ -940,9 +944,6 @@ void mmc_release_host(struct mmc_host *host)
 
 	WARN_ON(!host->claimed);
 
-	if (host->ops->disable && host->claim_cnt == 1)
-		host->ops->disable(host);
-
 	spin_lock_irqsave(&host->lock, flags);
 	if (--host->claim_cnt) {
 		/* Release for nested claim */
@@ -952,6 +953,8 @@ void mmc_release_host(struct mmc_host *host)
 		host->claimer = NULL;
 		spin_unlock_irqrestore(&host->lock, flags);
 		wake_up(&host->wq);
+		pm_runtime_mark_last_busy(mmc_dev(host));
+		pm_runtime_put_autosuspend(mmc_dev(host));
 	}
 }
 EXPORT_SYMBOL(mmc_release_host);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 1d41e8541f38..c84131e28625 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/of.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
 #include <linux/pm_runtime.h>
@@ -336,6 +337,8 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
 {
 	int err = 0, idx;
 	unsigned int part_size;
+	struct device_node *np;
+	bool broken_hpi = false;
 
 	/* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */
 	card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
@@ -349,6 +352,11 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		}
 	}
 
+	np = mmc_of_find_child_device(card->host, 0);
+	if (np && of_device_is_compatible(np, "mmc-card"))
+		broken_hpi = of_property_read_bool(np, "broken-hpi");
+	of_node_put(np);
+
 	/*
 	 * The EXT_CSD format is meant to be forward compatible. As long
 	 * as CSD_STRUCTURE does not change, all values for EXT_CSD_REV
@@ -494,7 +502,7 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		}
 
 		/* check whether the eMMC card supports HPI */
-		if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1) {
+		if (!broken_hpi && (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1)) {
 			card->ext_csd.hpi = 1;
 			if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x2)
 				card->ext_csd.hpi_cmd =	MMC_STOP_TRANSMISSION;
diff --git a/drivers/mmc/core/pwrseq.c b/drivers/mmc/core/pwrseq.c
index 862356123d78..ab2129781161 100644
--- a/drivers/mmc/core/pwrseq.c
+++ b/drivers/mmc/core/pwrseq.c
@@ -19,7 +19,7 @@
 
 struct mmc_pwrseq_match {
 	const char *compatible;
-	int (*alloc)(struct mmc_host *host, struct device *dev);
+	struct mmc_pwrseq *(*alloc)(struct mmc_host *host, struct device *dev);
 };
 
 static struct mmc_pwrseq_match pwrseq_match[] = {
@@ -52,6 +52,7 @@ int mmc_pwrseq_alloc(struct mmc_host *host)
 	struct platform_device *pdev;
 	struct device_node *np;
 	struct mmc_pwrseq_match *match;
+	struct mmc_pwrseq *pwrseq;
 	int ret = 0;
 
 	np = of_parse_phandle(host->parent->of_node, "mmc-pwrseq", 0);
@@ -70,9 +71,14 @@ int mmc_pwrseq_alloc(struct mmc_host *host)
 		goto err;
 	}
 
-	ret = match->alloc(host, &pdev->dev);
-	if (!ret)
-		dev_info(host->parent, "allocated mmc-pwrseq\n");
+	pwrseq = match->alloc(host, &pdev->dev);
+	if (IS_ERR(pwrseq)) {
+		ret = PTR_ERR(host->pwrseq);
+		goto err;
+	}
+
+	host->pwrseq = pwrseq;
+	dev_info(host->parent, "allocated mmc-pwrseq\n");
 
 err:
 	of_node_put(np);
@@ -109,4 +115,6 @@ void mmc_pwrseq_free(struct mmc_host *host)
 
 	if (pwrseq && pwrseq->ops && pwrseq->ops->free)
 		pwrseq->ops->free(host);
+
+	host->pwrseq = NULL;
 }
diff --git a/drivers/mmc/core/pwrseq.h b/drivers/mmc/core/pwrseq.h
index aba3409e8d6e..096da48c6a7e 100644
--- a/drivers/mmc/core/pwrseq.h
+++ b/drivers/mmc/core/pwrseq.h
@@ -27,8 +27,10 @@ void mmc_pwrseq_post_power_on(struct mmc_host *host);
 void mmc_pwrseq_power_off(struct mmc_host *host);
 void mmc_pwrseq_free(struct mmc_host *host);
 
-int mmc_pwrseq_simple_alloc(struct mmc_host *host, struct device *dev);
-int mmc_pwrseq_emmc_alloc(struct mmc_host *host, struct device *dev);
+struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host,
+					   struct device *dev);
+struct mmc_pwrseq *mmc_pwrseq_emmc_alloc(struct mmc_host *host,
+					 struct device *dev);
 
 #else
 
diff --git a/drivers/mmc/core/pwrseq_emmc.c b/drivers/mmc/core/pwrseq_emmc.c
index a2d545904fbf..9d6d2fb21796 100644
--- a/drivers/mmc/core/pwrseq_emmc.c
+++ b/drivers/mmc/core/pwrseq_emmc.c
@@ -49,7 +49,6 @@ static void mmc_pwrseq_emmc_free(struct mmc_host *host)
 	unregister_restart_handler(&pwrseq->reset_nb);
 	gpiod_put(pwrseq->reset_gpio);
 	kfree(pwrseq);
-	host->pwrseq = NULL;
 }
 
 static struct mmc_pwrseq_ops mmc_pwrseq_emmc_ops = {
@@ -67,14 +66,15 @@ static int mmc_pwrseq_emmc_reset_nb(struct notifier_block *this,
 	return NOTIFY_DONE;
 }
 
-int mmc_pwrseq_emmc_alloc(struct mmc_host *host, struct device *dev)
+struct mmc_pwrseq *mmc_pwrseq_emmc_alloc(struct mmc_host *host,
+					 struct device *dev)
 {
 	struct mmc_pwrseq_emmc *pwrseq;
 	int ret = 0;
 
 	pwrseq = kzalloc(sizeof(struct mmc_pwrseq_emmc), GFP_KERNEL);
 	if (!pwrseq)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 
 	pwrseq->reset_gpio = gpiod_get_index(dev, "reset", 0, GPIOD_OUT_LOW);
 	if (IS_ERR(pwrseq->reset_gpio)) {
@@ -92,10 +92,9 @@ int mmc_pwrseq_emmc_alloc(struct mmc_host *host, struct device *dev)
 	register_restart_handler(&pwrseq->reset_nb);
 
 	pwrseq->pwrseq.ops = &mmc_pwrseq_emmc_ops;
-	host->pwrseq = &pwrseq->pwrseq;
 
-	return 0;
+	return &pwrseq->pwrseq;
 free:
 	kfree(pwrseq);
-	return ret;
+	return ERR_PTR(ret);
 }
diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c
index c53f14a7ce54..0b14b83a53d6 100644
--- a/drivers/mmc/core/pwrseq_simple.c
+++ b/drivers/mmc/core/pwrseq_simple.c
@@ -85,7 +85,6 @@ static void mmc_pwrseq_simple_free(struct mmc_host *host)
 		clk_put(pwrseq->ext_clk);
 
 	kfree(pwrseq);
-	host->pwrseq = NULL;
 }
 
 static struct mmc_pwrseq_ops mmc_pwrseq_simple_ops = {
@@ -95,7 +94,8 @@ static struct mmc_pwrseq_ops mmc_pwrseq_simple_ops = {
 	.free = mmc_pwrseq_simple_free,
 };
 
-int mmc_pwrseq_simple_alloc(struct mmc_host *host, struct device *dev)
+struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host,
+					   struct device *dev)
 {
 	struct mmc_pwrseq_simple *pwrseq;
 	int i, nr_gpios, ret = 0;
@@ -107,7 +107,7 @@ int mmc_pwrseq_simple_alloc(struct mmc_host *host, struct device *dev)
 	pwrseq = kzalloc(sizeof(struct mmc_pwrseq_simple) + nr_gpios *
 			 sizeof(struct gpio_desc *), GFP_KERNEL);
 	if (!pwrseq)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 
 	pwrseq->ext_clk = clk_get(dev, "ext_clock");
 	if (IS_ERR(pwrseq->ext_clk) &&
@@ -133,13 +133,12 @@ int mmc_pwrseq_simple_alloc(struct mmc_host *host, struct device *dev)
 
 	pwrseq->nr_gpios = nr_gpios;
 	pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops;
-	host->pwrseq = &pwrseq->pwrseq;
 
-	return 0;
+	return &pwrseq->pwrseq;
 clk_put:
 	if (!IS_ERR(pwrseq->ext_clk))
 		clk_put(pwrseq->ext_clk);
 free:
 	kfree(pwrseq);
-	return ret;
+	return ERR_PTR(ret);
 }
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index ce6cc47206b0..5bc6c7dbbd60 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -293,19 +293,22 @@ static int sdio_enable_4bit_bus(struct mmc_card *card)
 	int err;
 
 	if (card->type == MMC_TYPE_SDIO)
-		return sdio_enable_wide(card);
-
-	if ((card->host->caps & MMC_CAP_4_BIT_DATA) &&
-		(card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
+		err = sdio_enable_wide(card);
+	else if ((card->host->caps & MMC_CAP_4_BIT_DATA) &&
+		 (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
 		err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
 		if (err)
 			return err;
+		err = sdio_enable_wide(card);
+		if (err <= 0)
+			mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1);
 	} else
 		return 0;
 
-	err = sdio_enable_wide(card);
-	if (err <= 0)
-		mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1);
+	if (err > 0) {
+		mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
+		err = 0;
+	}
 
 	return err;
 }
@@ -547,13 +550,8 @@ static int mmc_sdio_init_uhs_card(struct mmc_card *card)
 	/*
 	 * Switch to wider bus (if supported).
 	 */
-	if (card->host->caps & MMC_CAP_4_BIT_DATA) {
+	if (card->host->caps & MMC_CAP_4_BIT_DATA)
 		err = sdio_enable_4bit_bus(card);
-		if (err > 0) {
-			mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
-			err = 0;
-		}
-	}
 
 	/* Set the driver strength for the card */
 	sdio_select_driver_type(card);
@@ -803,9 +801,7 @@ try_again:
 		 * Switch to wider bus (if supported).
 		 */
 		err = sdio_enable_4bit_bus(card);
-		if (err > 0)
-			mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
-		else if (err)
+		if (err)
 			goto remove;
 	}
 finish:
@@ -983,10 +979,6 @@ static int mmc_sdio_resume(struct mmc_host *host)
 	} else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
 		/* We may have switched to 1-bit mode during suspend */
 		err = sdio_enable_4bit_bus(host->card);
-		if (err > 0) {
-			mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
-			err = 0;
-		}
 	}
 
 	if (!err && host->sdio_irqs) {
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 61ac63a3776a..7f4db908f89b 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -132,7 +132,7 @@ config MMC_SDHCI_OF_ARASAN
 config MMC_SDHCI_OF_ESDHC
 	tristate "SDHCI OF support for the Freescale eSDHC controller"
 	depends on MMC_SDHCI_PLTFM
-	depends on PPC_OF
+	depends on PPC
 	select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
 	help
 	  This selects the Freescale eSDHC controller support.
@@ -144,7 +144,7 @@ config MMC_SDHCI_OF_ESDHC
 config MMC_SDHCI_OF_HLWD
 	tristate "SDHCI OF support for the Nintendo Wii SDHCI controllers"
 	depends on MMC_SDHCI_PLTFM
-	depends on PPC_OF
+	depends on PPC
 	select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
@@ -230,7 +230,7 @@ config MMC_SDHCI_PXAV3
 	tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
 	depends on CLKDEV_LOOKUP
 	depends on MMC_SDHCI_PLTFM
-	depends on ARCH_MMP || COMPILE_TEST
+	depends on ARCH_BERLIN || ARCH_MMP || ARCH_MVEBU || COMPILE_TEST
 	default CPU_MMP2
 	help
 	  This selects the Marvell(R) PXAV3 SD Host Controller.
@@ -255,6 +255,7 @@ config MMC_SDHCI_PXAV2
 config MMC_SDHCI_SPEAR
 	tristate "SDHCI support on ST SPEAr platform"
 	depends on MMC_SDHCI && PLAT_SPEAR
+	depends on OF
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
 	  often referrered to as the HSMMC block in some of the ST SPEAR range
@@ -307,6 +308,20 @@ config MMC_SDHCI_F_SDH30
 
 	  If unsure, say N.
 
+config MMC_SDHCI_IPROC
+	tristate "SDHCI platform support for the iProc SD/MMC Controller"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on MMC_SDHCI_PLTFM
+	default ARCH_BCM_IPROC
+	select MMC_SDHCI_IO_ACCESSORS
+	help
+	  This selects the iProc SD/MMC controller.
+
+	  If you have an IPROC platform with SD or MMC devices,
+	  say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_MOXART
 	tristate "MOXART SD/MMC Host Controller support"
 	depends on ARCH_MOXART && MMC
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 6a7cfe0de332..711e913450f5 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)	+= sdhci-of-esdhc.o
 obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
 obj-$(CONFIG_MMC_SDHCI_BCM_KONA)	+= sdhci-bcm-kona.o
 obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= sdhci-bcm2835.o
+obj-$(CONFIG_MMC_SDHCI_IPROC)		+= sdhci-iproc.o
 obj-$(CONFIG_MMC_SDHCI_MSM)		+= sdhci-msm.o
 obj-$(CONFIG_MMC_SDHCI_ST)		+= sdhci-st.o
 
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index c97001e15227..0aa44e679df4 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -135,10 +135,17 @@
 #define ATMCI_REGS_SIZE		0x100
 
 /* Register access macros */
-#define atmci_readl(port,reg)				\
+#ifdef CONFIG_AVR32
+#define atmci_readl(port, reg)			\
 	__raw_readl((port)->regs + reg)
-#define atmci_writel(port,reg,value)			\
+#define atmci_writel(port, reg, value)			\
 	__raw_writel((value), (port)->regs + reg)
+#else
+#define atmci_readl(port, reg)			\
+	readl_relaxed((port)->regs + reg)
+#define atmci_writel(port, reg, value)			\
+	writel_relaxed((value), (port)->regs + reg)
+#endif
 
 /* On AVR chips the Peripheral DMA Controller is not connected to MCI. */
 #ifdef CONFIG_AVR32
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index fe32948c6114..e761eb1b1441 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -40,7 +40,12 @@ struct dw_mci_exynos_priv_data {
 	u8				ciu_div;
 	u32				sdr_timing;
 	u32				ddr_timing;
+	u32				hs400_timing;
+	u32				tuned_sample;
 	u32				cur_speed;
+	u32				dqs_delay;
+	u32				saved_dqs_en;
+	u32				saved_strobe_ctrl;
 };
 
 static struct dw_mci_exynos_compatible {
@@ -71,6 +76,21 @@ static struct dw_mci_exynos_compatible {
 	},
 };
 
+static inline u8 dw_mci_exynos_get_ciu_div(struct dw_mci *host)
+{
+	struct dw_mci_exynos_priv_data *priv = host->priv;
+
+	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412)
+		return EXYNOS4412_FIXED_CIU_CLK_DIV;
+	else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210)
+		return EXYNOS4210_FIXED_CIU_CLK_DIV;
+	else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+			priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+		return SDMMC_CLKSEL_GET_DIV(mci_readl(host, CLKSEL64)) + 1;
+	else
+		return SDMMC_CLKSEL_GET_DIV(mci_readl(host, CLKSEL)) + 1;
+}
+
 static int dw_mci_exynos_priv_init(struct dw_mci *host)
 {
 	struct dw_mci_exynos_priv_data *priv = host->priv;
@@ -85,6 +105,16 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)
 			   SDMMC_MPSCTRL_NON_SECURE_WRITE_BIT);
 	}
 
+	if (priv->ctrl_type >= DW_MCI_TYPE_EXYNOS5420) {
+		priv->saved_strobe_ctrl = mci_readl(host, HS400_DLINE_CTRL);
+		priv->saved_dqs_en = mci_readl(host, HS400_DQS_EN);
+		priv->saved_dqs_en |= AXI_NON_BLOCKING_WR;
+		mci_writel(host, HS400_DQS_EN, priv->saved_dqs_en);
+		if (!priv->dqs_delay)
+			priv->dqs_delay =
+				DQS_CTRL_GET_RD_DELAY(priv->saved_strobe_ctrl);
+	}
+
 	return 0;
 }
 
@@ -97,6 +127,26 @@ static int dw_mci_exynos_setup_clock(struct dw_mci *host)
 	return 0;
 }
 
+static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing)
+{
+	struct dw_mci_exynos_priv_data *priv = host->priv;
+	u32 clksel;
+
+	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+		clksel = mci_readl(host, CLKSEL64);
+	else
+		clksel = mci_readl(host, CLKSEL);
+
+	clksel = (clksel & ~SDMMC_CLKSEL_TIMING_MASK) | timing;
+
+	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+		mci_writel(host, CLKSEL64, clksel);
+	else
+		mci_writel(host, CLKSEL, clksel);
+}
+
 #ifdef CONFIG_PM_SLEEP
 static int dw_mci_exynos_suspend(struct device *dev)
 {
@@ -172,30 +222,38 @@ static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
 	}
 }
 
-static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing)
 {
 	struct dw_mci_exynos_priv_data *priv = host->priv;
-	unsigned int wanted = ios->clock;
-	unsigned long actual;
-	u8 div = priv->ciu_div + 1;
+	u32 dqs, strobe;
 
-	if (ios->timing == MMC_TIMING_MMC_DDR52) {
-		if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
-			priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
-			mci_writel(host, CLKSEL64, priv->ddr_timing);
-		else
-			mci_writel(host, CLKSEL, priv->ddr_timing);
-		/* Should be double rate for DDR mode */
-		if (ios->bus_width == MMC_BUS_WIDTH_8)
-			wanted <<= 1;
+	/*
+	 * Not supported to configure register
+	 * related to HS400
+	 */
+	if (priv->ctrl_type < DW_MCI_TYPE_EXYNOS5420)
+		return;
+
+	dqs = priv->saved_dqs_en;
+	strobe = priv->saved_strobe_ctrl;
+
+	if (timing == MMC_TIMING_MMC_HS400) {
+		dqs |= DATA_STROBE_EN;
+		strobe = DQS_CTRL_RD_DELAY(strobe, priv->dqs_delay);
 	} else {
-		if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
-			priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
-			mci_writel(host, CLKSEL64, priv->sdr_timing);
-		else
-			mci_writel(host, CLKSEL, priv->sdr_timing);
+		dqs &= ~DATA_STROBE_EN;
 	}
 
+	mci_writel(host, HS400_DQS_EN, dqs);
+	mci_writel(host, HS400_DLINE_CTRL, strobe);
+}
+
+static void dw_mci_exynos_adjust_clock(struct dw_mci *host, unsigned int wanted)
+{
+	struct dw_mci_exynos_priv_data *priv = host->priv;
+	unsigned long actual;
+	u8 div;
+	int ret;
 	/*
 	 * Don't care if wanted clock is zero or
 	 * ciu clock is unavailable
@@ -207,17 +265,52 @@ static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
 	if (wanted < EXYNOS_CCLKIN_MIN)
 		wanted = EXYNOS_CCLKIN_MIN;
 
-	if (wanted != priv->cur_speed) {
-		int ret = clk_set_rate(host->ciu_clk, wanted * div);
-		if (ret)
-			dev_warn(host->dev,
-				"failed to set clk-rate %u error: %d\n",
-				 wanted * div, ret);
-		actual = clk_get_rate(host->ciu_clk);
-		host->bus_hz = actual / div;
-		priv->cur_speed = wanted;
-		host->current_speed = 0;
+	if (wanted == priv->cur_speed)
+		return;
+
+	div = dw_mci_exynos_get_ciu_div(host);
+	ret = clk_set_rate(host->ciu_clk, wanted * div);
+	if (ret)
+		dev_warn(host->dev,
+			"failed to set clk-rate %u error: %d\n",
+			wanted * div, ret);
+	actual = clk_get_rate(host->ciu_clk);
+	host->bus_hz = actual / div;
+	priv->cur_speed = wanted;
+	host->current_speed = 0;
+}
+
+static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+	struct dw_mci_exynos_priv_data *priv = host->priv;
+	unsigned int wanted = ios->clock;
+	u32 timing = ios->timing, clksel;
+
+	switch (timing) {
+	case MMC_TIMING_MMC_HS400:
+		/* Update tuned sample timing */
+		clksel = SDMMC_CLKSEL_UP_SAMPLE(
+				priv->hs400_timing, priv->tuned_sample);
+		wanted <<= 1;
+		break;
+	case MMC_TIMING_MMC_DDR52:
+		clksel = priv->ddr_timing;
+		/* Should be double rate for DDR mode */
+		if (ios->bus_width == MMC_BUS_WIDTH_8)
+			wanted <<= 1;
+		break;
+	default:
+		clksel = priv->sdr_timing;
 	}
+
+	/* Set clock timing for the requested speed mode*/
+	dw_mci_exynos_set_clksel_timing(host, clksel);
+
+	/* Configure setting for HS400 */
+	dw_mci_exynos_config_hs400(host, timing);
+
+	/* Configure clock rate */
+	dw_mci_exynos_adjust_clock(host, wanted);
 }
 
 static int dw_mci_exynos_parse_dt(struct dw_mci *host)
@@ -260,6 +353,16 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host)
 		return ret;
 
 	priv->ddr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);
+
+	ret = of_property_read_u32_array(np,
+			"samsung,dw-mshc-hs400-timing", timing, 2);
+	if (!ret && of_property_read_u32(np,
+				"samsung,read-strobe-delay", &priv->dqs_delay))
+		dev_dbg(host->dev,
+			"read-strobe-delay is not found, assuming usage of default value\n");
+
+	priv->hs400_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1],
+						HS400_FIXED_CIU_CLK_DIV);
 	host->priv = priv;
 	return 0;
 }
@@ -285,7 +388,7 @@ static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample)
 		clksel = mci_readl(host, CLKSEL64);
 	else
 		clksel = mci_readl(host, CLKSEL);
-	clksel = (clksel & ~0x7) | SDMMC_CLKSEL_CCLK_SAMPLE(sample);
+	clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample);
 	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
 		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
 		mci_writel(host, CLKSEL64, clksel);
@@ -304,13 +407,16 @@ static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host)
 		clksel = mci_readl(host, CLKSEL64);
 	else
 		clksel = mci_readl(host, CLKSEL);
+
 	sample = (clksel + 1) & 0x7;
-	clksel = (clksel & ~0x7) | sample;
+	clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample);
+
 	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
 		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
 		mci_writel(host, CLKSEL64, clksel);
 	else
 		mci_writel(host, CLKSEL, clksel);
+
 	return sample;
 }
 
@@ -343,6 +449,7 @@ out:
 static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot)
 {
 	struct dw_mci *host = slot->host;
+	struct dw_mci_exynos_priv_data *priv = host->priv;
 	struct mmc_host *mmc = slot->mmc;
 	u8 start_smpl, smpl, candiates = 0;
 	s8 found = -1;
@@ -360,14 +467,27 @@ static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot)
 	} while (start_smpl != smpl);
 
 	found = dw_mci_exynos_get_best_clksmpl(candiates);
-	if (found >= 0)
+	if (found >= 0) {
 		dw_mci_exynos_set_clksmpl(host, found);
-	else
+		priv->tuned_sample = found;
+	} else {
 		ret = -EIO;
+	}
 
 	return ret;
 }
 
+static int dw_mci_exynos_prepare_hs400_tuning(struct dw_mci *host,
+					struct mmc_ios *ios)
+{
+	struct dw_mci_exynos_priv_data *priv = host->priv;
+
+	dw_mci_exynos_set_clksel_timing(host, priv->hs400_timing);
+	dw_mci_exynos_adjust_clock(host, (ios->clock) << 1);
+
+	return 0;
+}
+
 /* Common capabilities of Exynos4/Exynos5 SoC */
 static unsigned long exynos_dwmmc_caps[4] = {
 	MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23,
@@ -384,6 +504,7 @@ static const struct dw_mci_drv_data exynos_drv_data = {
 	.set_ios		= dw_mci_exynos_set_ios,
 	.parse_dt		= dw_mci_exynos_parse_dt,
 	.execute_tuning		= dw_mci_exynos_execute_tuning,
+	.prepare_hs400_tuning	= dw_mci_exynos_prepare_hs400_tuning,
 };
 
 static const struct of_device_id dw_mci_exynos_match[] = {
diff --git a/drivers/mmc/host/dw_mmc-exynos.h b/drivers/mmc/host/dw_mmc-exynos.h
index 7872ce586b55..595c934e6166 100644
--- a/drivers/mmc/host/dw_mmc-exynos.h
+++ b/drivers/mmc/host/dw_mmc-exynos.h
@@ -12,20 +12,36 @@
 #ifndef _DW_MMC_EXYNOS_H_
 #define _DW_MMC_EXYNOS_H_
 
-/* Extended Register's Offset */
 #define SDMMC_CLKSEL			0x09C
 #define SDMMC_CLKSEL64			0x0A8
 
+/* Extended Register's Offset */
+#define SDMMC_HS400_DQS_EN		0x180
+#define SDMMC_HS400_ASYNC_FIFO_CTRL	0x184
+#define SDMMC_HS400_DLINE_CTRL		0x188
+
 /* CLKSEL register defines */
 #define SDMMC_CLKSEL_CCLK_SAMPLE(x)	(((x) & 7) << 0)
 #define SDMMC_CLKSEL_CCLK_DRIVE(x)	(((x) & 7) << 16)
 #define SDMMC_CLKSEL_CCLK_DIVIDER(x)	(((x) & 7) << 24)
 #define SDMMC_CLKSEL_GET_DRV_WD3(x)	(((x) >> 16) & 0x7)
+#define SDMMC_CLKSEL_GET_DIV(x)		(((x) >> 24) & 0x7)
+#define SDMMC_CLKSEL_UP_SAMPLE(x, y)	(((x) & ~SDMMC_CLKSEL_CCLK_SAMPLE(7)) |\
+					 SDMMC_CLKSEL_CCLK_SAMPLE(y))
 #define SDMMC_CLKSEL_TIMING(x, y, z)	(SDMMC_CLKSEL_CCLK_SAMPLE(x) |	\
 					 SDMMC_CLKSEL_CCLK_DRIVE(y) |	\
 					 SDMMC_CLKSEL_CCLK_DIVIDER(z))
+#define SDMMC_CLKSEL_TIMING_MASK	SDMMC_CLKSEL_TIMING(0x7, 0x7, 0x7)
 #define SDMMC_CLKSEL_WAKEUP_INT		BIT(11)
 
+/* RCLK_EN register defines */
+#define DATA_STROBE_EN			BIT(0)
+#define AXI_NON_BLOCKING_WR	BIT(7)
+
+/* DLINE_CTRL register defines */
+#define DQS_CTRL_RD_DELAY(x, y)		(((x) & ~0x3FF) | ((y) & 0x3FF))
+#define DQS_CTRL_GET_RD_DELAY(x)	((x) & 0x3FF)
+
 /* Protector Register */
 #define SDMMC_EMMCP_BASE	0x1000
 #define SDMMC_MPSECURITY	(SDMMC_EMMCP_BASE + 0x0010)
@@ -49,6 +65,7 @@
 /* Fixed clock divider */
 #define EXYNOS4210_FIXED_CIU_CLK_DIV	2
 #define EXYNOS4412_FIXED_CIU_CLK_DIV	4
+#define HS400_FIXED_CIU_CLK_DIV		1
 
 /* Minimal required clock frequency for cclkin, unit: HZ */
 #define EXYNOS_CCLKIN_MIN	50000000
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
index e2a726a503ee..dbf166f94f1b 100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -76,12 +76,20 @@ static int dw_mci_rockchip_init(struct dw_mci *host)
 	return 0;
 }
 
+/* Common capabilities of RK3288 SoC */
+static unsigned long dw_mci_rk3288_dwmmc_caps[4] = {
+	MMC_CAP_RUNTIME_RESUME, /* emmc */
+	MMC_CAP_RUNTIME_RESUME, /* sdmmc */
+	MMC_CAP_RUNTIME_RESUME, /* sdio0 */
+	MMC_CAP_RUNTIME_RESUME, /* sdio1 */
+};
 static const struct dw_mci_drv_data rk2928_drv_data = {
 	.prepare_command        = dw_mci_rockchip_prepare_command,
 	.init			= dw_mci_rockchip_init,
 };
 
 static const struct dw_mci_drv_data rk3288_drv_data = {
+	.caps			= dw_mci_rk3288_dwmmc_caps,
 	.prepare_command        = dw_mci_rockchip_prepare_command,
 	.set_ios		= dw_mci_rk3288_set_ios,
 	.setup_clock    = dw_mci_rk3288_setup_clock,
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 4d2e3c2e1830..38b29265cc7c 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -69,7 +69,8 @@ struct idmac_desc_64addr {
 
 	u32		des2;	/*Buffer sizes */
 #define IDMAC_64ADDR_SET_BUFFER1_SIZE(d, s) \
-	((d)->des2 = ((d)->des2 & 0x03ffe000) | ((s) & 0x1fff))
+	((d)->des2 = ((d)->des2 & cpu_to_le32(0x03ffe000)) | \
+	 ((cpu_to_le32(s)) & cpu_to_le32(0x1fff)))
 
 	u32		des3;	/* Reserved */
 
@@ -81,7 +82,7 @@ struct idmac_desc_64addr {
 };
 
 struct idmac_desc {
-	u32		des0;	/* Control Descriptor */
+	__le32		des0;	/* Control Descriptor */
 #define IDMAC_DES0_DIC	BIT(1)
 #define IDMAC_DES0_LD	BIT(2)
 #define IDMAC_DES0_FD	BIT(3)
@@ -90,18 +91,19 @@ struct idmac_desc {
 #define IDMAC_DES0_CES	BIT(30)
 #define IDMAC_DES0_OWN	BIT(31)
 
-	u32		des1;	/* Buffer sizes */
+	__le32		des1;	/* Buffer sizes */
 #define IDMAC_SET_BUFFER1_SIZE(d, s) \
 	((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
 
-	u32		des2;	/* buffer 1 physical address */
+	__le32		des2;	/* buffer 1 physical address */
 
-	u32		des3;	/* buffer 2 physical address */
+	__le32		des3;	/* buffer 2 physical address */
 };
 #endif /* CONFIG_MMC_DW_IDMAC */
 
 static bool dw_mci_reset(struct dw_mci *host);
 static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
+static int dw_mci_card_busy(struct mmc_host *mmc);
 
 #if defined(CONFIG_DEBUG_FS)
 static int dw_mci_req_show(struct seq_file *s, void *v)
@@ -335,6 +337,31 @@ static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd)
 	return cmdr;
 }
 
+static void dw_mci_wait_while_busy(struct dw_mci *host, u32 cmd_flags)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(500);
+
+	/*
+	 * Databook says that before issuing a new data transfer command
+	 * we need to check to see if the card is busy.  Data transfer commands
+	 * all have SDMMC_CMD_PRV_DAT_WAIT set, so we'll key off that.
+	 *
+	 * ...also allow sending for SDMMC_CMD_VOLT_SWITCH where busy is
+	 * expected.
+	 */
+	if ((cmd_flags & SDMMC_CMD_PRV_DAT_WAIT) &&
+	    !(cmd_flags & SDMMC_CMD_VOLT_SWITCH)) {
+		while (mci_readl(host, STATUS) & SDMMC_STATUS_BUSY) {
+			if (time_after(jiffies, timeout)) {
+				/* Command will fail; we'll pass error then */
+				dev_err(host->dev, "Busy; trying anyway\n");
+				break;
+			}
+			udelay(10);
+		}
+	}
+}
+
 static void dw_mci_start_command(struct dw_mci *host,
 				 struct mmc_command *cmd, u32 cmd_flags)
 {
@@ -345,6 +372,7 @@ static void dw_mci_start_command(struct dw_mci *host,
 
 	mci_writel(host, CMDARG, cmd->arg);
 	wmb();
+	dw_mci_wait_while_busy(host, cmd_flags);
 
 	mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
 }
@@ -477,23 +505,23 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
 			 * Set the OWN bit and disable interrupts for this
 			 * descriptor
 			 */
-			desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC |
-						IDMAC_DES0_CH;
+			desc->des0 = cpu_to_le32(IDMAC_DES0_OWN |
+					IDMAC_DES0_DIC | IDMAC_DES0_CH);
 			/* Buffer length */
 			IDMAC_SET_BUFFER1_SIZE(desc, length);
 
 			/* Physical address to DMA to/from */
-			desc->des2 = mem_addr;
+			desc->des2 = cpu_to_le32(mem_addr);
 		}
 
 		/* Set first descriptor */
 		desc = host->sg_cpu;
-		desc->des0 |= IDMAC_DES0_FD;
+		desc->des0 |= cpu_to_le32(IDMAC_DES0_FD);
 
 		/* Set last descriptor */
 		desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
-		desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
-		desc->des0 |= IDMAC_DES0_LD;
+		desc->des0 &= cpu_to_le32(~(IDMAC_DES0_CH | IDMAC_DES0_DIC));
+		desc->des0 |= cpu_to_le32(IDMAC_DES0_LD);
 	}
 
 	wmb();
@@ -562,12 +590,12 @@ static int dw_mci_idmac_init(struct dw_mci *host)
 
 		/* Forward link the descriptor list */
 		for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
-			p->des3 = host->sg_dma + (sizeof(struct idmac_desc) *
-								(i + 1));
+			p->des3 = cpu_to_le32(host->sg_dma +
+					(sizeof(struct idmac_desc) * (i + 1)));
 
 		/* Set the last descriptor as the end-of-ring descriptor */
-		p->des3 = host->sg_dma;
-		p->des0 = IDMAC_DES0_ER;
+		p->des3 = cpu_to_le32(host->sg_dma);
+		p->des0 = cpu_to_le32(IDMAC_DES0_ER);
 	}
 
 	dw_mci_idmac_reset(host);
@@ -737,6 +765,7 @@ static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
 		return;
 
 	if (host->timing != MMC_TIMING_MMC_HS200 &&
+	    host->timing != MMC_TIMING_MMC_HS400 &&
 	    host->timing != MMC_TIMING_UHS_SDR104)
 		goto disable;
 
@@ -876,6 +905,7 @@ static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
 
 	mci_writel(host, CMDARG, arg);
 	wmb();
+	dw_mci_wait_while_busy(host, cmd);
 	mci_writel(host, CMD, SDMMC_CMD_START | cmd);
 
 	while (time_before(jiffies, timeout)) {
@@ -992,6 +1022,26 @@ static void __dw_mci_start_request(struct dw_mci *host,
 
 	dw_mci_start_command(host, cmd, cmdflags);
 
+	if (cmd->opcode == SD_SWITCH_VOLTAGE) {
+		unsigned long irqflags;
+
+		/*
+		 * Databook says to fail after 2ms w/ no response, but evidence
+		 * shows that sometimes the cmd11 interrupt takes over 130ms.
+		 * We'll set to 500ms, plus an extra jiffy just in case jiffies
+		 * is just about to roll over.
+		 *
+		 * We do this whole thing under spinlock and only if the
+		 * command hasn't already completed (indicating the the irq
+		 * already ran so we don't want the timeout).
+		 */
+		spin_lock_irqsave(&host->irq_lock, irqflags);
+		if (!test_bit(EVENT_CMD_COMPLETE, &host->pending_events))
+			mod_timer(&host->cmd11_timer,
+				jiffies + msecs_to_jiffies(500) + 1);
+		spin_unlock_irqrestore(&host->irq_lock, irqflags);
+	}
+
 	if (mrq->stop)
 		host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
 	else
@@ -1084,7 +1134,8 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	regs = mci_readl(slot->host, UHS_REG);
 
 	/* DDR mode set */
-	if (ios->timing == MMC_TIMING_MMC_DDR52)
+	if (ios->timing == MMC_TIMING_MMC_DDR52 ||
+	    ios->timing == MMC_TIMING_MMC_HS400)
 		regs |= ((0x1 << slot->id) << 16);
 	else
 		regs &= ~((0x1 << slot->id) << 16);
@@ -1101,12 +1152,6 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (drv_data && drv_data->set_ios)
 		drv_data->set_ios(slot->host, ios);
 
-	/* Slot specific timing and width adjustment */
-	dw_mci_setup_bus(slot, false);
-
-	if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
-		slot->host->state = STATE_IDLE;
-
 	switch (ios->power_mode) {
 	case MMC_POWER_UP:
 		if (!IS_ERR(mmc->supply.vmmc)) {
@@ -1125,23 +1170,39 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		mci_writel(slot->host, PWREN, regs);
 		break;
 	case MMC_POWER_ON:
-		if (!IS_ERR(mmc->supply.vqmmc) && !slot->host->vqmmc_enabled) {
-			ret = regulator_enable(mmc->supply.vqmmc);
-			if (ret < 0)
-				dev_err(slot->host->dev,
-					"failed to enable vqmmc regulator\n");
-			else
+		if (!slot->host->vqmmc_enabled) {
+			if (!IS_ERR(mmc->supply.vqmmc)) {
+				ret = regulator_enable(mmc->supply.vqmmc);
+				if (ret < 0)
+					dev_err(slot->host->dev,
+						"failed to enable vqmmc\n");
+				else
+					slot->host->vqmmc_enabled = true;
+
+			} else {
+				/* Keep track so we don't reset again */
 				slot->host->vqmmc_enabled = true;
+			}
+
+			/* Reset our state machine after powering on */
+			dw_mci_ctrl_reset(slot->host,
+					  SDMMC_CTRL_ALL_RESET_FLAGS);
 		}
+
+		/* Adjust clock / bus width after power is up */
+		dw_mci_setup_bus(slot, false);
+
 		break;
 	case MMC_POWER_OFF:
+		/* Turn clock off before power goes down */
+		dw_mci_setup_bus(slot, false);
+
 		if (!IS_ERR(mmc->supply.vmmc))
 			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
 
-		if (!IS_ERR(mmc->supply.vqmmc) && slot->host->vqmmc_enabled) {
+		if (!IS_ERR(mmc->supply.vqmmc) && slot->host->vqmmc_enabled)
 			regulator_disable(mmc->supply.vqmmc);
-			slot->host->vqmmc_enabled = false;
-		}
+		slot->host->vqmmc_enabled = false;
 
 		regs = mci_readl(slot->host, PWREN);
 		regs &= ~(1 << slot->id);
@@ -1150,6 +1211,9 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	default:
 		break;
 	}
+
+	if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
+		slot->host->state = STATE_IDLE;
 }
 
 static int dw_mci_card_busy(struct mmc_host *mmc)
@@ -1323,6 +1387,18 @@ static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	return err;
 }
 
+static int dw_mci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct dw_mci *host = slot->host;
+	const struct dw_mci_drv_data *drv_data = host->drv_data;
+
+	if (drv_data && drv_data->prepare_hs400_tuning)
+		return drv_data->prepare_hs400_tuning(host, ios);
+
+	return 0;
+}
+
 static const struct mmc_host_ops dw_mci_ops = {
 	.request		= dw_mci_request,
 	.pre_req		= dw_mci_pre_req,
@@ -1335,6 +1411,7 @@ static const struct mmc_host_ops dw_mci_ops = {
 	.card_busy		= dw_mci_card_busy,
 	.start_signal_voltage_switch = dw_mci_switch_voltage,
 	.init_card		= dw_mci_init_card,
+	.prepare_hs400_tuning	= dw_mci_prepare_hs400_tuning,
 };
 
 static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
@@ -1520,7 +1597,10 @@ static void dw_mci_tasklet_func(unsigned long priv)
 			if (test_and_clear_bit(EVENT_DATA_ERROR,
 					       &host->pending_events)) {
 				dw_mci_stop_dma(host);
-				send_stop_abort(host, data);
+				if (data->stop ||
+				    !(host->data_status & (SDMMC_INT_DRTO |
+							   SDMMC_INT_EBE)))
+					send_stop_abort(host, data);
 				state = STATE_DATA_ERROR;
 				break;
 			}
@@ -1547,7 +1627,10 @@ static void dw_mci_tasklet_func(unsigned long priv)
 			if (test_and_clear_bit(EVENT_DATA_ERROR,
 					       &host->pending_events)) {
 				dw_mci_stop_dma(host);
-				send_stop_abort(host, data);
+				if (data->stop ||
+				    !(host->data_status & (SDMMC_INT_DRTO |
+							   SDMMC_INT_EBE)))
+					send_stop_abort(host, data);
 				state = STATE_DATA_ERROR;
 				break;
 			}
@@ -1685,8 +1768,7 @@ static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt)
 		buf += len;
 		cnt -= len;
 		if (host->part_buf_count == 2) {
-			mci_writew(host, DATA(host->data_offset),
-					host->part_buf16);
+			mci_fifo_writew(host->fifo_reg, host->part_buf16);
 			host->part_buf_count = 0;
 		}
 	}
@@ -1703,15 +1785,14 @@ static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt)
 			cnt -= len;
 			/* push data from aligned buffer into fifo */
 			for (i = 0; i < items; ++i)
-				mci_writew(host, DATA(host->data_offset),
-						aligned_buf[i]);
+				mci_fifo_writew(host->fifo_reg, aligned_buf[i]);
 		}
 	} else
 #endif
 	{
 		u16 *pdata = buf;
 		for (; cnt >= 2; cnt -= 2)
-			mci_writew(host, DATA(host->data_offset), *pdata++);
+			mci_fifo_writew(host->fifo_reg, *pdata++);
 		buf = pdata;
 	}
 	/* put anything remaining in the part_buf */
@@ -1720,8 +1801,7 @@ static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt)
 		 /* Push data if we have reached the expected data length */
 		if ((data->bytes_xfered + init_cnt) ==
 		    (data->blksz * data->blocks))
-			mci_writew(host, DATA(host->data_offset),
-				   host->part_buf16);
+			mci_fifo_writew(host->fifo_reg, host->part_buf16);
 	}
 }
 
@@ -1736,8 +1816,7 @@ static void dw_mci_pull_data16(struct dw_mci *host, void *buf, int cnt)
 			int items = len >> 1;
 			int i;
 			for (i = 0; i < items; ++i)
-				aligned_buf[i] = mci_readw(host,
-						DATA(host->data_offset));
+				aligned_buf[i] = mci_fifo_readw(host->fifo_reg);
 			/* memcpy from aligned buffer into output buffer */
 			memcpy(buf, aligned_buf, len);
 			buf += len;
@@ -1748,11 +1827,11 @@ static void dw_mci_pull_data16(struct dw_mci *host, void *buf, int cnt)
 	{
 		u16 *pdata = buf;
 		for (; cnt >= 2; cnt -= 2)
-			*pdata++ = mci_readw(host, DATA(host->data_offset));
+			*pdata++ = mci_fifo_readw(host->fifo_reg);
 		buf = pdata;
 	}
 	if (cnt) {
-		host->part_buf16 = mci_readw(host, DATA(host->data_offset));
+		host->part_buf16 = mci_fifo_readw(host->fifo_reg);
 		dw_mci_pull_final_bytes(host, buf, cnt);
 	}
 }
@@ -1768,8 +1847,7 @@ static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt)
 		buf += len;
 		cnt -= len;
 		if (host->part_buf_count == 4) {
-			mci_writel(host, DATA(host->data_offset),
-					host->part_buf32);
+			mci_fifo_writel(host->fifo_reg,	host->part_buf32);
 			host->part_buf_count = 0;
 		}
 	}
@@ -1786,15 +1864,14 @@ static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt)
 			cnt -= len;
 			/* push data from aligned buffer into fifo */
 			for (i = 0; i < items; ++i)
-				mci_writel(host, DATA(host->data_offset),
-						aligned_buf[i]);
+				mci_fifo_writel(host->fifo_reg,	aligned_buf[i]);
 		}
 	} else
 #endif
 	{
 		u32 *pdata = buf;
 		for (; cnt >= 4; cnt -= 4)
-			mci_writel(host, DATA(host->data_offset), *pdata++);
+			mci_fifo_writel(host->fifo_reg, *pdata++);
 		buf = pdata;
 	}
 	/* put anything remaining in the part_buf */
@@ -1803,8 +1880,7 @@ static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt)
 		 /* Push data if we have reached the expected data length */
 		if ((data->bytes_xfered + init_cnt) ==
 		    (data->blksz * data->blocks))
-			mci_writel(host, DATA(host->data_offset),
-				   host->part_buf32);
+			mci_fifo_writel(host->fifo_reg, host->part_buf32);
 	}
 }
 
@@ -1819,8 +1895,7 @@ static void dw_mci_pull_data32(struct dw_mci *host, void *buf, int cnt)
 			int items = len >> 2;
 			int i;
 			for (i = 0; i < items; ++i)
-				aligned_buf[i] = mci_readl(host,
-						DATA(host->data_offset));
+				aligned_buf[i] = mci_fifo_readl(host->fifo_reg);
 			/* memcpy from aligned buffer into output buffer */
 			memcpy(buf, aligned_buf, len);
 			buf += len;
@@ -1831,11 +1906,11 @@ static void dw_mci_pull_data32(struct dw_mci *host, void *buf, int cnt)
 	{
 		u32 *pdata = buf;
 		for (; cnt >= 4; cnt -= 4)
-			*pdata++ = mci_readl(host, DATA(host->data_offset));
+			*pdata++ = mci_fifo_readl(host->fifo_reg);
 		buf = pdata;
 	}
 	if (cnt) {
-		host->part_buf32 = mci_readl(host, DATA(host->data_offset));
+		host->part_buf32 = mci_fifo_readl(host->fifo_reg);
 		dw_mci_pull_final_bytes(host, buf, cnt);
 	}
 }
@@ -1852,8 +1927,7 @@ static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt)
 		cnt -= len;
 
 		if (host->part_buf_count == 8) {
-			mci_writeq(host, DATA(host->data_offset),
-					host->part_buf);
+			mci_fifo_writeq(host->fifo_reg,	host->part_buf);
 			host->part_buf_count = 0;
 		}
 	}
@@ -1870,15 +1944,14 @@ static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt)
 			cnt -= len;
 			/* push data from aligned buffer into fifo */
 			for (i = 0; i < items; ++i)
-				mci_writeq(host, DATA(host->data_offset),
-						aligned_buf[i]);
+				mci_fifo_writeq(host->fifo_reg,	aligned_buf[i]);
 		}
 	} else
 #endif
 	{
 		u64 *pdata = buf;
 		for (; cnt >= 8; cnt -= 8)
-			mci_writeq(host, DATA(host->data_offset), *pdata++);
+			mci_fifo_writeq(host->fifo_reg, *pdata++);
 		buf = pdata;
 	}
 	/* put anything remaining in the part_buf */
@@ -1887,8 +1960,7 @@ static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt)
 		/* Push data if we have reached the expected data length */
 		if ((data->bytes_xfered + init_cnt) ==
 		    (data->blksz * data->blocks))
-			mci_writeq(host, DATA(host->data_offset),
-				   host->part_buf);
+			mci_fifo_writeq(host->fifo_reg, host->part_buf);
 	}
 }
 
@@ -1903,8 +1975,8 @@ static void dw_mci_pull_data64(struct dw_mci *host, void *buf, int cnt)
 			int items = len >> 3;
 			int i;
 			for (i = 0; i < items; ++i)
-				aligned_buf[i] = mci_readq(host,
-						DATA(host->data_offset));
+				aligned_buf[i] = mci_fifo_readq(host->fifo_reg);
+
 			/* memcpy from aligned buffer into output buffer */
 			memcpy(buf, aligned_buf, len);
 			buf += len;
@@ -1915,11 +1987,11 @@ static void dw_mci_pull_data64(struct dw_mci *host, void *buf, int cnt)
 	{
 		u64 *pdata = buf;
 		for (; cnt >= 8; cnt -= 8)
-			*pdata++ = mci_readq(host, DATA(host->data_offset));
+			*pdata++ = mci_fifo_readq(host->fifo_reg);
 		buf = pdata;
 	}
 	if (cnt) {
-		host->part_buf = mci_readq(host, DATA(host->data_offset));
+		host->part_buf = mci_fifo_readq(host->fifo_reg);
 		dw_mci_pull_final_bytes(host, buf, cnt);
 	}
 }
@@ -2097,9 +2169,20 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 		/* Check volt switch first, since it can look like an error */
 		if ((host->state == STATE_SENDING_CMD11) &&
 		    (pending & SDMMC_INT_VOLT_SWITCH)) {
+			unsigned long irqflags;
+
 			mci_writel(host, RINTSTS, SDMMC_INT_VOLT_SWITCH);
 			pending &= ~SDMMC_INT_VOLT_SWITCH;
+
+			/*
+			 * Hold the lock; we know cmd11_timer can't be kicked
+			 * off after the lock is released, so safe to delete.
+			 */
+			spin_lock_irqsave(&host->irq_lock, irqflags);
 			dw_mci_cmd_interrupt(host, pending);
+			spin_unlock_irqrestore(&host->irq_lock, irqflags);
+
+			del_timer(&host->cmd11_timer);
 		}
 
 		if (pending & DW_MCI_CMD_ERROR_FLAGS) {
@@ -2156,6 +2239,10 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 		/* Handle SDIO Interrupts */
 		for (i = 0; i < host->num_slots; i++) {
 			struct dw_mci_slot *slot = host->slot[i];
+
+			if (!slot)
+				continue;
+
 			if (pending & SDMMC_INT_SDIO(slot->sdio_id)) {
 				mci_writel(host, RINTSTS,
 					   SDMMC_INT_SDIO(slot->sdio_id));
@@ -2506,6 +2593,20 @@ ciu_out:
 	return ret;
 }
 
+static void dw_mci_cmd11_timer(unsigned long arg)
+{
+	struct dw_mci *host = (struct dw_mci *)arg;
+
+	if (host->state != STATE_SENDING_CMD11) {
+		dev_warn(host->dev, "Unexpected CMD11 timeout\n");
+		return;
+	}
+
+	host->cmd_status = SDMMC_INT_RTO;
+	set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
+	tasklet_schedule(&host->tasklet);
+}
+
 #ifdef CONFIG_OF
 static struct dw_mci_of_quirks {
 	char *quirk;
@@ -2574,6 +2675,34 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
 }
 #endif /* CONFIG_OF */
 
+static void dw_mci_enable_cd(struct dw_mci *host)
+{
+	struct dw_mci_board *brd = host->pdata;
+	unsigned long irqflags;
+	u32 temp;
+	int i;
+
+	/* No need for CD if broken card detection */
+	if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
+		return;
+
+	/* No need for CD if all slots have a non-error GPIO */
+	for (i = 0; i < host->num_slots; i++) {
+		struct dw_mci_slot *slot = host->slot[i];
+
+		if (IS_ERR_VALUE(mmc_gpio_get_cd(slot->mmc)))
+			break;
+	}
+	if (i == host->num_slots)
+		return;
+
+	spin_lock_irqsave(&host->irq_lock, irqflags);
+	temp = mci_readl(host, INTMASK);
+	temp  |= SDMMC_INT_CD;
+	mci_writel(host, INTMASK, temp);
+	spin_unlock_irqrestore(&host->irq_lock, irqflags);
+}
+
 int dw_mci_probe(struct dw_mci *host)
 {
 	const struct dw_mci_drv_data *drv_data = host->drv_data;
@@ -2652,6 +2781,9 @@ int dw_mci_probe(struct dw_mci *host)
 		}
 	}
 
+	setup_timer(&host->cmd11_timer,
+		    dw_mci_cmd11_timer, (unsigned long)host);
+
 	host->quirks = host->pdata->quirks;
 
 	spin_lock_init(&host->lock);
@@ -2731,9 +2863,9 @@ int dw_mci_probe(struct dw_mci *host)
 	dev_info(host->dev, "Version ID is %04x\n", host->verid);
 
 	if (host->verid < DW_MMC_240A)
-		host->data_offset = DATA_OFFSET;
+		host->fifo_reg = host->regs + DATA_OFFSET;
 	else
-		host->data_offset = DATA_240A_OFFSET;
+		host->fifo_reg = host->regs + DATA_240A_OFFSET;
 
 	tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
 	ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
@@ -2747,13 +2879,13 @@ int dw_mci_probe(struct dw_mci *host)
 		host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1;
 
 	/*
-	 * Enable interrupts for command done, data over, data empty, card det,
+	 * Enable interrupts for command done, data over, data empty,
 	 * receive ready and error such as transmit, receive timeout, crc error
 	 */
 	mci_writel(host, RINTSTS, 0xFFFFFFFF);
 	mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
 		   SDMMC_INT_TXDR | SDMMC_INT_RXDR |
-		   DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
+		   DW_MCI_ERROR_FLAGS);
 	mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
 
 	dev_info(host->dev, "DW MMC controller at irq %d, "
@@ -2778,6 +2910,9 @@ int dw_mci_probe(struct dw_mci *host)
 		goto err_dmaunmap;
 	}
 
+	/* Now that slots are all setup, we can enable card detect */
+	dw_mci_enable_cd(host);
+
 	if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
 		dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
 
@@ -2864,7 +2999,7 @@ int dw_mci_resume(struct dw_mci *host)
 	mci_writel(host, RINTSTS, 0xFFFFFFFF);
 	mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
 		   SDMMC_INT_TXDR | SDMMC_INT_RXDR |
-		   DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
+		   DW_MCI_ERROR_FLAGS);
 	mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
 
 	for (i = 0; i < host->num_slots; i++) {
@@ -2876,6 +3011,10 @@ int dw_mci_resume(struct dw_mci *host)
 			dw_mci_setup_bus(slot, true);
 		}
 	}
+
+	/* Now that slots are all setup, we can enable card detect */
+	dw_mci_enable_cd(host);
+
 	return 0;
 }
 EXPORT_SYMBOL(dw_mci_resume);
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 18c4afe683b8..f45ab91de339 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -169,24 +169,34 @@
 #define SDMMC_CTRL_ALL_RESET_FLAGS \
 	(SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | SDMMC_CTRL_DMA_RESET)
 
+/* FIFO register access macros. These should not change the data endian-ness
+ * as they are written to memory to be dealt with by the upper layers */
+#define mci_fifo_readw(__reg)	__raw_readw(__reg)
+#define mci_fifo_readl(__reg)	__raw_readl(__reg)
+#define mci_fifo_readq(__reg)	__raw_readq(__reg)
+
+#define mci_fifo_writew(__value, __reg)	__raw_writew(__reg, __value)
+#define mci_fifo_writel(__value, __reg)	__raw_writel(__reg, __value)
+#define mci_fifo_writeq(__value, __reg)	__raw_writeq(__reg, __value)
+
 /* Register access macros */
 #define mci_readl(dev, reg)			\
-	__raw_readl((dev)->regs + SDMMC_##reg)
+	readl_relaxed((dev)->regs + SDMMC_##reg)
 #define mci_writel(dev, reg, value)			\
-	__raw_writel((value), (dev)->regs + SDMMC_##reg)
+	writel_relaxed((value), (dev)->regs + SDMMC_##reg)
 
 /* 16-bit FIFO access macros */
 #define mci_readw(dev, reg)			\
-	__raw_readw((dev)->regs + SDMMC_##reg)
+	readw_relaxed((dev)->regs + SDMMC_##reg)
 #define mci_writew(dev, reg, value)			\
-	__raw_writew((value), (dev)->regs + SDMMC_##reg)
+	writew_relaxed((value), (dev)->regs + SDMMC_##reg)
 
 /* 64-bit FIFO access macros */
 #ifdef readq
 #define mci_readq(dev, reg)			\
-	__raw_readq((dev)->regs + SDMMC_##reg)
+	readq_relaxed((dev)->regs + SDMMC_##reg)
 #define mci_writeq(dev, reg, value)			\
-	__raw_writeq((value), (dev)->regs + SDMMC_##reg)
+	writeq_relaxed((value), (dev)->regs + SDMMC_##reg)
 #else
 /*
  * Dummy readq implementation for architectures that don't define it.
@@ -200,6 +210,10 @@
 	(*(volatile u64 __force *)((dev)->regs + SDMMC_##reg))
 #define mci_writeq(dev, reg, value)			\
 	(*(volatile u64 __force *)((dev)->regs + SDMMC_##reg) = (value))
+
+#define __raw_writeq(__value, __reg) \
+	(*(volatile u64 __force *)(__reg) = (__value))
+#define __raw_readq(__reg) (*(volatile u64 __force *)(__reg))
 #endif
 
 extern int dw_mci_probe(struct dw_mci *host);
@@ -271,5 +285,7 @@ struct dw_mci_drv_data {
 	void		(*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
 	int		(*parse_dt)(struct dw_mci *host);
 	int		(*execute_tuning)(struct dw_mci_slot *slot);
+	int		(*prepare_hs400_tuning)(struct dw_mci *host,
+						struct mmc_ios *ios);
 };
 #endif /* _DW_MMC_H_ */
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index e4a07546f8b6..ae19d83bb9de 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1507,7 +1507,7 @@ static int mmc_spi_remove(struct spi_device *spi)
 	return 0;
 }
 
-static struct of_device_id mmc_spi_of_match_table[] = {
+static const struct of_device_id mmc_spi_of_match_table[] = {
 	{ .compatible = "mmc-spi-slot", },
 	{},
 };
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 7fe16194ebc8..fb266745f824 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1613,7 +1613,10 @@ static int mmci_probe(struct amba_device *dev,
 	dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
 
 	/* Get regulators and the supported OCR mask */
-	mmc_regulator_get_supply(mmc);
+	ret = mmc_regulator_get_supply(mmc);
+	if (ret == -EPROBE_DEFER)
+		goto clk_disable;
+
 	if (!mmc->ocr_avail)
 		mmc->ocr_avail = plat->ocr_mask;
 	else if (plat->ocr_mask)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index f84cfb01716d..9df2b6801f76 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -222,10 +222,6 @@ struct omap_hsmmc_host {
 	struct omap_hsmmc_next	next_data;
 	struct	omap_hsmmc_platform_data	*pdata;
 
-	/* To handle board related suspend/resume functionality for MMC */
-	int (*suspend)(struct device *dev);
-	int (*resume)(struct device *dev);
-
 	/* return MMC cover switch state, can be NULL if not supported.
 	 *
 	 * possible return values:
@@ -234,12 +230,7 @@ struct omap_hsmmc_host {
 	 */
 	int (*get_cover_state)(struct device *dev);
 
-	/* Card detection IRQs */
-	int card_detect_irq;
-
 	int (*card_detect)(struct device *dev);
-	int (*get_ro)(struct device *dev);
-
 };
 
 struct omap_mmc_of_data {
@@ -256,13 +247,6 @@ static int omap_hsmmc_card_detect(struct device *dev)
 	return mmc_gpio_get_cd(host->mmc);
 }
 
-static int omap_hsmmc_get_wp(struct device *dev)
-{
-	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
-
-	return mmc_gpio_get_ro(host->mmc);
-}
-
 static int omap_hsmmc_get_cover_state(struct device *dev)
 {
 	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
@@ -434,7 +418,7 @@ static inline int omap_hsmmc_have_reg(void)
 
 #endif
 
-static irqreturn_t omap_hsmmc_detect(int irq, void *dev_id);
+static irqreturn_t omap_hsmmc_cover_irq(int irq, void *dev_id);
 
 static int omap_hsmmc_gpio_init(struct mmc_host *mmc,
 				struct omap_hsmmc_host *host,
@@ -442,29 +426,25 @@ static int omap_hsmmc_gpio_init(struct mmc_host *mmc,
 {
 	int ret;
 
-	if (gpio_is_valid(pdata->switch_pin)) {
-		if (pdata->cover)
-			host->get_cover_state =
-				omap_hsmmc_get_cover_state;
-		else
-			host->card_detect = omap_hsmmc_card_detect;
-		host->card_detect_irq =
-				gpio_to_irq(pdata->switch_pin);
-		mmc_gpio_set_cd_isr(mmc, omap_hsmmc_detect);
-		ret = mmc_gpio_request_cd(mmc, pdata->switch_pin, 0);
+	if (gpio_is_valid(pdata->gpio_cod)) {
+		ret = mmc_gpio_request_cd(mmc, pdata->gpio_cod, 0);
 		if (ret)
 			return ret;
-	} else {
-		pdata->switch_pin = -EINVAL;
+
+		host->get_cover_state = omap_hsmmc_get_cover_state;
+		mmc_gpio_set_cd_isr(mmc, omap_hsmmc_cover_irq);
+	} else if (gpio_is_valid(pdata->gpio_cd)) {
+		ret = mmc_gpio_request_cd(mmc, pdata->gpio_cd, 0);
+		if (ret)
+			return ret;
+
+		host->card_detect = omap_hsmmc_card_detect;
 	}
 
 	if (gpio_is_valid(pdata->gpio_wp)) {
-		host->get_ro = omap_hsmmc_get_wp;
 		ret = mmc_gpio_request_ro(mmc, pdata->gpio_wp);
 		if (ret)
 			return ret;
-	} else {
-		pdata->gpio_wp = -EINVAL;
 	}
 
 	return 0;
@@ -882,6 +862,8 @@ static void omap_hsmmc_request_done(struct omap_hsmmc_host *host, struct mmc_req
 		return;
 	host->mrq = NULL;
 	mmc_request_done(host->mmc, mrq);
+	pm_runtime_mark_last_busy(host->dev);
+	pm_runtime_put_autosuspend(host->dev);
 }
 
 /*
@@ -1252,26 +1234,16 @@ static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host)
 }
 
 /*
- * irq handler to notify the core about card insertion/removal
+ * irq handler when (cell-phone) cover is mounted/removed
  */
-static irqreturn_t omap_hsmmc_detect(int irq, void *dev_id)
+static irqreturn_t omap_hsmmc_cover_irq(int irq, void *dev_id)
 {
 	struct omap_hsmmc_host *host = dev_id;
-	int carddetect;
 
 	sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
 
-	if (host->card_detect)
-		carddetect = host->card_detect(host->dev);
-	else {
-		omap_hsmmc_protect_card(host);
-		carddetect = -ENOSYS;
-	}
-
-	if (carddetect)
-		mmc_detect_change(host->mmc, (HZ * 200) / 1000);
-	else
-		mmc_detect_change(host->mmc, (HZ * 50) / 1000);
+	omap_hsmmc_protect_card(host);
+	mmc_detect_change(host->mmc, (HZ * 200) / 1000);
 	return IRQ_HANDLED;
 }
 
@@ -1305,6 +1277,8 @@ static void omap_hsmmc_dma_callback(void *param)
 
 		host->mrq = NULL;
 		mmc_request_done(host->mmc, mrq);
+		pm_runtime_mark_last_busy(host->dev);
+		pm_runtime_put_autosuspend(host->dev);
 	}
 }
 
@@ -1537,6 +1511,7 @@ static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req)
 
 	BUG_ON(host->req_in_progress);
 	BUG_ON(host->dma_ch != -1);
+	pm_runtime_get_sync(host->dev);
 	if (host->protect_card) {
 		if (host->reqs_blocked < 3) {
 			/*
@@ -1553,6 +1528,8 @@ static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req)
 			req->data->error = -EBADF;
 		req->cmd->retries = 0;
 		mmc_request_done(mmc, req);
+		pm_runtime_mark_last_busy(host->dev);
+		pm_runtime_put_autosuspend(host->dev);
 		return;
 	} else if (host->reqs_blocked)
 		host->reqs_blocked = 0;
@@ -1566,6 +1543,8 @@ static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req)
 			req->data->error = err;
 		host->mrq = NULL;
 		mmc_request_done(mmc, req);
+		pm_runtime_mark_last_busy(host->dev);
+		pm_runtime_put_autosuspend(host->dev);
 		return;
 	}
 	if (req->sbc && !(host->flags & AUTO_CMD23)) {
@@ -1641,15 +1620,6 @@ static int omap_hsmmc_get_cd(struct mmc_host *mmc)
 	return host->card_detect(host->dev);
 }
 
-static int omap_hsmmc_get_ro(struct mmc_host *mmc)
-{
-	struct omap_hsmmc_host *host = mmc_priv(mmc);
-
-	if (!host->get_ro)
-		return -ENOSYS;
-	return host->get_ro(host->dev);
-}
-
 static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
 {
 	struct omap_hsmmc_host *host = mmc_priv(mmc);
@@ -1778,25 +1748,6 @@ static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host)
 	set_sd_bus_power(host);
 }
 
-static int omap_hsmmc_enable_fclk(struct mmc_host *mmc)
-{
-	struct omap_hsmmc_host *host = mmc_priv(mmc);
-
-	pm_runtime_get_sync(host->dev);
-
-	return 0;
-}
-
-static int omap_hsmmc_disable_fclk(struct mmc_host *mmc)
-{
-	struct omap_hsmmc_host *host = mmc_priv(mmc);
-
-	pm_runtime_mark_last_busy(host->dev);
-	pm_runtime_put_autosuspend(host->dev);
-
-	return 0;
-}
-
 static int omap_hsmmc_multi_io_quirk(struct mmc_card *card,
 				     unsigned int direction, int blk_size)
 {
@@ -1808,14 +1759,12 @@ static int omap_hsmmc_multi_io_quirk(struct mmc_card *card,
 }
 
 static struct mmc_host_ops omap_hsmmc_ops = {
-	.enable = omap_hsmmc_enable_fclk,
-	.disable = omap_hsmmc_disable_fclk,
 	.post_req = omap_hsmmc_post_req,
 	.pre_req = omap_hsmmc_pre_req,
 	.request = omap_hsmmc_request,
 	.set_ios = omap_hsmmc_set_ios,
 	.get_cd = omap_hsmmc_get_cd,
-	.get_ro = omap_hsmmc_get_ro,
+	.get_ro = mmc_gpio_get_ro,
 	.init_card = omap_hsmmc_init_card,
 	.enable_sdio_irq = omap_hsmmc_enable_sdio_irq,
 };
@@ -1937,7 +1886,8 @@ static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
 	if (of_find_property(np, "ti,dual-volt", NULL))
 		pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
 
-	pdata->switch_pin = -EINVAL;
+	pdata->gpio_cd = -EINVAL;
+	pdata->gpio_cod = -EINVAL;
 	pdata->gpio_wp = -EINVAL;
 
 	if (of_find_property(np, "ti,non-removable", NULL)) {
@@ -2179,9 +2129,9 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 		if (ret < 0)
 			goto err_slot_name;
 	}
-	if (host->card_detect_irq && host->get_cover_state) {
+	if (host->get_cover_state) {
 		ret = device_create_file(&mmc->class_dev,
-					&dev_attr_cover_switch);
+					 &dev_attr_cover_switch);
 		if (ret < 0)
 			goto err_slot_name;
 	}
@@ -2236,7 +2186,7 @@ static int omap_hsmmc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int omap_hsmmc_suspend(struct device *dev)
 {
 	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
@@ -2292,10 +2242,6 @@ static int omap_hsmmc_resume(struct device *dev)
 	pm_runtime_put_autosuspend(host->dev);
 	return 0;
 }
-
-#else
-#define omap_hsmmc_suspend	NULL
-#define omap_hsmmc_resume	NULL
 #endif
 
 static int omap_hsmmc_runtime_suspend(struct device *dev)
@@ -2376,8 +2322,7 @@ static int omap_hsmmc_runtime_resume(struct device *dev)
 }
 
 static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
-	.suspend	= omap_hsmmc_suspend,
-	.resume		= omap_hsmmc_resume,
+	SET_SYSTEM_SLEEP_PM_OPS(omap_hsmmc_suspend, omap_hsmmc_resume)
 	.runtime_suspend = omap_hsmmc_runtime_suspend,
 	.runtime_resume = omap_hsmmc_runtime_resume,
 };
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index a45ed39d062c..22d929fa3371 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -40,7 +40,6 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/pm.h>
 #include <linux/mmc/slot-gpio.h>
-#include <linux/mmc/sdhci.h>
 
 #include "sdhci.h"
 
diff --git a/drivers/mmc/host/sdhci-bcm-kona.c b/drivers/mmc/host/sdhci-bcm-kona.c
index 34bb8f92586e..2bd90fb35c75 100644
--- a/drivers/mmc/host/sdhci-bcm-kona.c
+++ b/drivers/mmc/host/sdhci-bcm-kona.c
@@ -54,7 +54,6 @@
 
 struct sdhci_bcm_kona_dev {
 	struct mutex	write_lock; /* protect back to back writes */
-	struct clk	*external_clk;
 };
 
 
@@ -175,24 +174,6 @@ static void sdhci_bcm_kona_card_event(struct sdhci_host *host)
 	}
 }
 
-/*
- * Get the base clock. Use central clock source for now. Not sure if different
- * clock speed to each dev is allowed
- */
-static unsigned int sdhci_bcm_kona_get_max_clk(struct sdhci_host *host)
-{
-	struct sdhci_bcm_kona_dev *kona_dev;
-	struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host);
-	kona_dev = sdhci_pltfm_priv(pltfm_priv);
-
-	return host->mmc->f_max;
-}
-
-static unsigned int sdhci_bcm_kona_get_timeout_clock(struct sdhci_host *host)
-{
-	return sdhci_bcm_kona_get_max_clk(host);
-}
-
 static void sdhci_bcm_kona_init_74_clocks(struct sdhci_host *host,
 				u8 power_mode)
 {
@@ -207,8 +188,8 @@ static void sdhci_bcm_kona_init_74_clocks(struct sdhci_host *host,
 
 static struct sdhci_ops sdhci_bcm_kona_ops = {
 	.set_clock = sdhci_set_clock,
-	.get_max_clock = sdhci_bcm_kona_get_max_clk,
-	.get_timeout_clock = sdhci_bcm_kona_get_timeout_clock,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
 	.platform_send_init_74_clocks = sdhci_bcm_kona_init_74_clocks,
 	.set_bus_width = sdhci_set_bus_width,
 	.reset = sdhci_reset,
@@ -264,21 +245,21 @@ static int sdhci_bcm_kona_probe(struct platform_device *pdev)
 		goto err_pltfm_free;
 	}
 
-	/* Get and enable the external clock */
-	kona_dev->external_clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(kona_dev->external_clk)) {
-		dev_err(dev, "Failed to get external clock\n");
-		ret = PTR_ERR(kona_dev->external_clk);
+	/* Get and enable the core clock */
+	pltfm_priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(pltfm_priv->clk)) {
+		dev_err(dev, "Failed to get core clock\n");
+		ret = PTR_ERR(pltfm_priv->clk);
 		goto err_pltfm_free;
 	}
 
-	if (clk_set_rate(kona_dev->external_clk, host->mmc->f_max) != 0) {
-		dev_err(dev, "Failed to set rate external clock\n");
+	if (clk_set_rate(pltfm_priv->clk, host->mmc->f_max) != 0) {
+		dev_err(dev, "Failed to set rate core clock\n");
 		goto err_pltfm_free;
 	}
 
-	if (clk_prepare_enable(kona_dev->external_clk) != 0) {
-		dev_err(dev, "Failed to enable external clock\n");
+	if (clk_prepare_enable(pltfm_priv->clk) != 0) {
+		dev_err(dev, "Failed to enable core clock\n");
 		goto err_pltfm_free;
 	}
 
@@ -333,7 +314,7 @@ err_reset:
 	sdhci_bcm_kona_sd_reset(host);
 
 err_clk_disable:
-	clk_disable_unprepare(kona_dev->external_clk);
+	clk_disable_unprepare(pltfm_priv->clk);
 
 err_pltfm_free:
 	sdhci_pltfm_free(pdev);
@@ -342,22 +323,6 @@ err_pltfm_free:
 	return ret;
 }
 
-static int sdhci_bcm_kona_remove(struct platform_device *pdev)
-{
-	struct sdhci_host *host = platform_get_drvdata(pdev);
-	struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host);
-	struct sdhci_bcm_kona_dev *kona_dev = sdhci_pltfm_priv(pltfm_priv);
-	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
-
-	sdhci_remove_host(host, dead);
-
-	clk_disable_unprepare(kona_dev->external_clk);
-
-	sdhci_pltfm_free(pdev);
-
-	return 0;
-}
-
 static struct platform_driver sdhci_bcm_kona_driver = {
 	.driver		= {
 		.name	= "sdhci-kona",
@@ -365,7 +330,7 @@ static struct platform_driver sdhci_bcm_kona_driver = {
 		.of_match_table = sdhci_bcm_kona_of_match,
 	},
 	.probe		= sdhci_bcm_kona_probe,
-	.remove		= sdhci_bcm_kona_remove,
+	.remove		= sdhci_pltfm_unregister,
 };
 module_platform_driver(sdhci_bcm_kona_driver);
 
diff --git a/drivers/mmc/host/sdhci-bcm2835.c b/drivers/mmc/host/sdhci-bcm2835.c
index 439d259fdf1d..0ef0343c603a 100644
--- a/drivers/mmc/host/sdhci-bcm2835.c
+++ b/drivers/mmc/host/sdhci-bcm2835.c
@@ -180,11 +180,6 @@ err:
 	return ret;
 }
 
-static int bcm2835_sdhci_remove(struct platform_device *pdev)
-{
-	return sdhci_pltfm_unregister(pdev);
-}
-
 static const struct of_device_id bcm2835_sdhci_of_match[] = {
 	{ .compatible = "brcm,bcm2835-sdhci" },
 	{ }
@@ -198,7 +193,7 @@ static struct platform_driver bcm2835_sdhci_driver = {
 		.pm = SDHCI_PLTFM_PMOPS,
 	},
 	.probe = bcm2835_sdhci_probe,
-	.remove = bcm2835_sdhci_remove,
+	.remove = sdhci_pltfm_unregister,
 };
 module_platform_driver(bcm2835_sdhci_driver);
 
diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c
index a7935a8d0922..59f2923f8054 100644
--- a/drivers/mmc/host/sdhci-cns3xxx.c
+++ b/drivers/mmc/host/sdhci-cns3xxx.c
@@ -98,18 +98,13 @@ static int sdhci_cns3xxx_probe(struct platform_device *pdev)
 	return sdhci_pltfm_register(pdev, &sdhci_cns3xxx_pdata, 0);
 }
 
-static int sdhci_cns3xxx_remove(struct platform_device *pdev)
-{
-	return sdhci_pltfm_unregister(pdev);
-}
-
 static struct platform_driver sdhci_cns3xxx_driver = {
 	.driver		= {
 		.name	= "sdhci-cns3xxx",
 		.pm	= SDHCI_PLTFM_PMOPS,
 	},
 	.probe		= sdhci_cns3xxx_probe,
-	.remove		= sdhci_cns3xxx_remove,
+	.remove		= sdhci_pltfm_unregister,
 };
 
 module_platform_driver(sdhci_cns3xxx_driver);
diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c
index ca969d271a27..407c21f152b2 100644
--- a/drivers/mmc/host/sdhci-dove.c
+++ b/drivers/mmc/host/sdhci-dove.c
@@ -28,10 +28,6 @@
 
 #include "sdhci-pltfm.h"
 
-struct sdhci_dove_priv {
-	struct clk *clk;
-};
-
 static u16 sdhci_dove_readw(struct sdhci_host *host, int reg)
 {
 	u16 ret;
@@ -84,27 +80,17 @@ static int sdhci_dove_probe(struct platform_device *pdev)
 {
 	struct sdhci_host *host;
 	struct sdhci_pltfm_host *pltfm_host;
-	struct sdhci_dove_priv *priv;
 	int ret;
 
-	priv = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_dove_priv),
-			    GFP_KERNEL);
-	if (!priv) {
-		dev_err(&pdev->dev, "unable to allocate private data");
-		return -ENOMEM;
-	}
-
-	priv->clk = devm_clk_get(&pdev->dev, NULL);
-
 	host = sdhci_pltfm_init(pdev, &sdhci_dove_pdata, 0);
 	if (IS_ERR(host))
 		return PTR_ERR(host);
 
 	pltfm_host = sdhci_priv(host);
-	pltfm_host->priv = priv;
+	pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
 
-	if (!IS_ERR(priv->clk))
-		clk_prepare_enable(priv->clk);
+	if (!IS_ERR(pltfm_host->clk))
+		clk_prepare_enable(pltfm_host->clk);
 
 	ret = mmc_of_parse(host->mmc);
 	if (ret)
@@ -117,26 +103,11 @@ static int sdhci_dove_probe(struct platform_device *pdev)
 	return 0;
 
 err_sdhci_add:
-	if (!IS_ERR(priv->clk))
-		clk_disable_unprepare(priv->clk);
+	clk_disable_unprepare(pltfm_host->clk);
 	sdhci_pltfm_free(pdev);
 	return ret;
 }
 
-static int sdhci_dove_remove(struct platform_device *pdev)
-{
-	struct sdhci_host *host = platform_get_drvdata(pdev);
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct sdhci_dove_priv *priv = pltfm_host->priv;
-
-	sdhci_pltfm_unregister(pdev);
-
-	if (!IS_ERR(priv->clk))
-		clk_disable_unprepare(priv->clk);
-
-	return 0;
-}
-
 static const struct of_device_id sdhci_dove_of_match_table[] = {
 	{ .compatible = "marvell,dove-sdhci", },
 	{}
@@ -150,7 +121,7 @@ static struct platform_driver sdhci_dove_driver = {
 		.of_match_table = sdhci_dove_of_match_table,
 	},
 	.probe		= sdhci_dove_probe,
-	.remove		= sdhci_dove_remove,
+	.remove		= sdhci_pltfm_unregister,
 };
 
 module_platform_driver(sdhci_dove_driver);
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 10ef8244a239..82f512d87cb8 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -416,7 +416,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 			new_val |= ESDHC_VENDOR_SPEC_FRC_SDCLK_ON;
 		else
 			new_val &= ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON;
-			writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
+		writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
 		return;
 	case SDHCI_HOST_CONTROL2:
 		new_val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
@@ -864,6 +864,7 @@ static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
 #ifdef CONFIG_OF
 static int
 sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
+			 struct sdhci_host *host,
 			 struct esdhc_platform_data *boarddata)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -900,11 +901,14 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 	if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line))
 		boarddata->delay_line = 0;
 
+	mmc_of_parse_voltage(np, &host->ocr_mask);
+
 	return 0;
 }
 #else
 static inline int
 sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
+			 struct sdhci_host *host,
 			 struct esdhc_platform_data *boarddata)
 {
 	return -ENODEV;
@@ -999,7 +1003,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 			host->ioaddr + ESDHC_TUNING_CTRL);
 
 	boarddata = &imx_data->boarddata;
-	if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
+	if (sdhci_esdhc_imx_probe_dt(pdev, host, boarddata) < 0) {
 		if (!host->mmc->parent->platform_data) {
 			dev_err(mmc_dev(host->mmc), "no board data!\n");
 			err = -EINVAL;
@@ -1009,40 +1013,9 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 					host->mmc->parent->platform_data);
 	}
 
-	/* write_protect */
-	if (boarddata->wp_type == ESDHC_WP_GPIO) {
-		err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
-		if (err) {
-			dev_err(mmc_dev(host->mmc),
-				"failed to request write-protect gpio!\n");
-			goto disable_clk;
-		}
-		host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
-	}
-
 	/* card_detect */
-	switch (boarddata->cd_type) {
-	case ESDHC_CD_GPIO:
-		err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0);
-		if (err) {
-			dev_err(mmc_dev(host->mmc),
-				"failed to request card-detect gpio!\n");
-			goto disable_clk;
-		}
-		/* fall through */
-
-	case ESDHC_CD_CONTROLLER:
-		/* we have a working card_detect back */
+	if (boarddata->cd_type == ESDHC_CD_CONTROLLER)
 		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
-		break;
-
-	case ESDHC_CD_PERMANENT:
-		host->mmc->caps |= MMC_CAP_NONREMOVABLE;
-		break;
-
-	case ESDHC_CD_NONE:
-		break;
-	}
 
 	switch (boarddata->max_bus_width) {
 	case 8:
@@ -1075,6 +1048,11 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
 	}
 
+	/* call to generic mmc_of_parse to support additional capabilities */
+	err = mmc_of_parse(host->mmc);
+	if (err)
+		goto disable_clk;
+
 	err = sdhci_add_host(host);
 	if (err)
 		goto disable_clk;
diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
new file mode 100644
index 000000000000..3b423b0ad8e7
--- /dev/null
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * iProc SDHCI platform driver
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mmc/host.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include "sdhci-pltfm.h"
+
+struct sdhci_iproc_data {
+	const struct sdhci_pltfm_data *pdata;
+	u32 caps;
+	u32 caps1;
+};
+
+struct sdhci_iproc_host {
+	const struct sdhci_iproc_data *data;
+	u32 shadow_cmd;
+	u32 shadow_blk;
+};
+
+#define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18)
+
+static inline u32 sdhci_iproc_readl(struct sdhci_host *host, int reg)
+{
+	u32 val = readl(host->ioaddr + reg);
+
+	pr_debug("%s: readl [0x%02x] 0x%08x\n",
+		 mmc_hostname(host->mmc), reg, val);
+	return val;
+}
+
+static u16 sdhci_iproc_readw(struct sdhci_host *host, int reg)
+{
+	u32 val = sdhci_iproc_readl(host, (reg & ~3));
+	u16 word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff;
+	return word;
+}
+
+static u8 sdhci_iproc_readb(struct sdhci_host *host, int reg)
+{
+	u32 val = sdhci_iproc_readl(host, (reg & ~3));
+	u8 byte = val >> REG_OFFSET_IN_BITS(reg) & 0xff;
+	return byte;
+}
+
+static inline void sdhci_iproc_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	pr_debug("%s: writel [0x%02x] 0x%08x\n",
+		 mmc_hostname(host->mmc), reg, val);
+
+	writel(val, host->ioaddr + reg);
+
+	if (host->clock <= 400000) {
+		/* Round up to micro-second four SD clock delay */
+		if (host->clock)
+			udelay((4 * 1000000 + host->clock - 1) / host->clock);
+		else
+			udelay(10);
+	}
+}
+
+/*
+ * The Arasan has a bugette whereby it may lose the content of successive
+ * writes to the same register that are within two SD-card clock cycles of
+ * each other (a clock domain crossing problem). The data
+ * register does not have this problem, which is just as well - otherwise we'd
+ * have to nobble the DMA engine too.
+ *
+ * This wouldn't be a problem with the code except that we can only write the
+ * controller with 32-bit writes.  So two different 16-bit registers are
+ * written back to back creates the problem.
+ *
+ * In reality, this only happens when SDHCI_BLOCK_SIZE and SDHCI_BLOCK_COUNT
+ * are written followed by SDHCI_TRANSFER_MODE and SDHCI_COMMAND.
+ * The BLOCK_SIZE and BLOCK_COUNT are meaningless until a command issued so
+ * the work around can be further optimized. We can keep shadow values of
+ * BLOCK_SIZE, BLOCK_COUNT, and TRANSFER_MODE until a COMMAND is issued.
+ * Then, write the BLOCK_SIZE+BLOCK_COUNT in a single 32-bit write followed
+ * by the TRANSFER+COMMAND in another 32-bit write.
+ */
+static void sdhci_iproc_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host);
+	u32 word_shift = REG_OFFSET_IN_BITS(reg);
+	u32 mask = 0xffff << word_shift;
+	u32 oldval, newval;
+
+	if (reg == SDHCI_COMMAND) {
+		/* Write the block now as we are issuing a command */
+		if (iproc_host->shadow_blk != 0) {
+			sdhci_iproc_writel(host, iproc_host->shadow_blk,
+				SDHCI_BLOCK_SIZE);
+			iproc_host->shadow_blk = 0;
+		}
+		oldval = iproc_host->shadow_cmd;
+	} else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) {
+		/* Block size and count are stored in shadow reg */
+		oldval = iproc_host->shadow_blk;
+	} else {
+		/* Read reg, all other registers are not shadowed */
+		oldval = sdhci_iproc_readl(host, (reg & ~3));
+	}
+	newval = (oldval & ~mask) | (val << word_shift);
+
+	if (reg == SDHCI_TRANSFER_MODE) {
+		/* Save the transfer mode until the command is issued */
+		iproc_host->shadow_cmd = newval;
+	} else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) {
+		/* Save the block info until the command is issued */
+		iproc_host->shadow_blk = newval;
+	} else {
+		/* Command or other regular 32-bit write */
+		sdhci_iproc_writel(host, newval, reg & ~3);
+	}
+}
+
+static void sdhci_iproc_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	u32 oldval = sdhci_iproc_readl(host, (reg & ~3));
+	u32 byte_shift = REG_OFFSET_IN_BITS(reg);
+	u32 mask = 0xff << byte_shift;
+	u32 newval = (oldval & ~mask) | (val << byte_shift);
+
+	sdhci_iproc_writel(host, newval, reg & ~3);
+}
+
+static const struct sdhci_ops sdhci_iproc_ops = {
+	.read_l = sdhci_iproc_readl,
+	.read_w = sdhci_iproc_readw,
+	.read_b = sdhci_iproc_readb,
+	.write_l = sdhci_iproc_writel,
+	.write_w = sdhci_iproc_writew,
+	.write_b = sdhci_iproc_writeb,
+	.set_clock = sdhci_set_clock,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = {
+	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
+	.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN,
+	.ops = &sdhci_iproc_ops,
+};
+
+static const struct sdhci_iproc_data iproc_data = {
+	.pdata = &sdhci_iproc_pltfm_data,
+	.caps = 0x05E90000,
+	.caps1 = 0x00000064,
+};
+
+static const struct of_device_id sdhci_iproc_of_match[] = {
+	{ .compatible = "brcm,sdhci-iproc-cygnus", .data = &iproc_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match);
+
+static int sdhci_iproc_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	const struct sdhci_iproc_data *iproc_data;
+	struct sdhci_host *host;
+	struct sdhci_iproc_host *iproc_host;
+	struct sdhci_pltfm_host *pltfm_host;
+	int ret;
+
+	match = of_match_device(sdhci_iproc_of_match, &pdev->dev);
+	if (!match)
+		return -EINVAL;
+	iproc_data = match->data;
+
+	host = sdhci_pltfm_init(pdev, iproc_data->pdata, sizeof(*iproc_host));
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	pltfm_host = sdhci_priv(host);
+	iproc_host = sdhci_pltfm_priv(pltfm_host);
+
+	iproc_host->data = iproc_data;
+
+	mmc_of_parse(host->mmc);
+	sdhci_get_of_property(pdev);
+
+	/* Enable EMMC 1/8V DDR capable */
+	host->mmc->caps |= MMC_CAP_1_8V_DDR;
+
+	pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pltfm_host->clk)) {
+		ret = PTR_ERR(pltfm_host->clk);
+		goto err;
+	}
+
+	if (iproc_host->data->pdata->quirks & SDHCI_QUIRK_MISSING_CAPS) {
+		host->caps = iproc_host->data->caps;
+		host->caps1 = iproc_host->data->caps1;
+	}
+
+	return sdhci_add_host(host);
+
+err:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static int sdhci_iproc_remove(struct platform_device *pdev)
+{
+	return sdhci_pltfm_unregister(pdev);
+}
+
+static struct platform_driver sdhci_iproc_driver = {
+	.driver = {
+		.name = "sdhci-iproc",
+		.of_match_table = sdhci_iproc_of_match,
+		.pm = SDHCI_PLTFM_PMOPS,
+	},
+	.probe = sdhci_iproc_probe,
+	.remove = sdhci_iproc_remove,
+};
+module_platform_driver(sdhci_iproc_driver);
+
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("IPROC SDHCI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 3d32ce896b09..4a09f7608c66 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -22,6 +22,11 @@
 
 #include "sdhci-pltfm.h"
 
+#define CORE_MCI_VERSION		0x50
+#define CORE_VERSION_MAJOR_SHIFT	28
+#define CORE_VERSION_MAJOR_MASK		(0xf << CORE_VERSION_MAJOR_SHIFT)
+#define CORE_VERSION_MINOR_MASK		0xff
+
 #define CORE_HC_MODE		0x78
 #define HC_MODE_EN		0x1
 #define CORE_POWER		0x0
@@ -41,6 +46,8 @@
 #define CORE_VENDOR_SPEC	0x10c
 #define CORE_CLK_PWRSAVE	BIT(1)
 
+#define CORE_VENDOR_SPEC_CAPABILITIES0	0x11c
+
 #define CDR_SELEXT_SHIFT	20
 #define CDR_SELEXT_MASK		(0xf << CDR_SELEXT_SHIFT)
 #define CMUX_SHIFT_PHASE_SHIFT	24
@@ -426,7 +433,9 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	struct sdhci_msm_host *msm_host;
 	struct resource *core_memres;
 	int ret;
-	u16 host_version;
+	u16 host_version, core_minor;
+	u32 core_version, caps;
+	u8 core_major;
 
 	msm_host = devm_kzalloc(&pdev->dev, sizeof(*msm_host), GFP_KERNEL);
 	if (!msm_host)
@@ -516,6 +525,24 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 		host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >>
 			       SDHCI_VENDOR_VER_SHIFT));
 
+	core_version = readl_relaxed(msm_host->core_mem + CORE_MCI_VERSION);
+	core_major = (core_version & CORE_VERSION_MAJOR_MASK) >>
+		      CORE_VERSION_MAJOR_SHIFT;
+	core_minor = core_version & CORE_VERSION_MINOR_MASK;
+	dev_dbg(&pdev->dev, "MCI Version: 0x%08x, major: 0x%04x, minor: 0x%02x\n",
+		core_version, core_major, core_minor);
+
+	/*
+	 * Support for some capabilities is not advertised by newer
+	 * controller versions and must be explicitly enabled.
+	 */
+	if (core_major >= 1 && core_minor != 0x11 && core_minor != 0x12) {
+		caps = readl_relaxed(host->ioaddr + SDHCI_CAPABILITIES);
+		caps |= SDHCI_CAN_VDD_300 | SDHCI_CAN_DO_8BIT;
+		writel_relaxed(caps, host->ioaddr +
+			       CORE_VENDOR_SPEC_CAPABILITIES0);
+	}
+
 	ret = sdhci_add_host(host);
 	if (ret)
 		goto clk_disable;
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index bcb51e9dfdcd..6287d426c96b 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -173,6 +173,12 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 	pltfm_host->priv = sdhci_arasan;
 	pltfm_host->clk = clk_xin;
 
+	ret = mmc_of_parse(host->mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "parsing dt failed (%u)\n", ret);
+		goto clk_disable_all;
+	}
+
 	ret = sdhci_add_host(host);
 	if (ret)
 		goto err_pltfm_free;
@@ -195,7 +201,6 @@ static int sdhci_arasan_remove(struct platform_device *pdev)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_arasan_data *sdhci_arasan = pltfm_host->priv;
 
-	clk_disable_unprepare(pltfm_host->clk);
 	clk_disable_unprepare(sdhci_arasan->clk_ahb);
 
 	return sdhci_pltfm_unregister(pdev);
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 17fe02ed6672..22e9111b11ff 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -386,11 +386,6 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int sdhci_esdhc_remove(struct platform_device *pdev)
-{
-	return sdhci_pltfm_unregister(pdev);
-}
-
 static const struct of_device_id sdhci_esdhc_of_match[] = {
 	{ .compatible = "fsl,mpc8379-esdhc" },
 	{ .compatible = "fsl,mpc8536-esdhc" },
@@ -406,7 +401,7 @@ static struct platform_driver sdhci_esdhc_driver = {
 		.pm = ESDHC_PMOPS,
 	},
 	.probe = sdhci_esdhc_probe,
-	.remove = sdhci_esdhc_remove,
+	.remove = sdhci_pltfm_unregister,
 };
 
 module_platform_driver(sdhci_esdhc_driver);
diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c
index be479279a1d5..4079a96ad37e 100644
--- a/drivers/mmc/host/sdhci-of-hlwd.c
+++ b/drivers/mmc/host/sdhci-of-hlwd.c
@@ -75,11 +75,6 @@ static int sdhci_hlwd_probe(struct platform_device *pdev)
 	return sdhci_pltfm_register(pdev, &sdhci_hlwd_pdata, 0);
 }
 
-static int sdhci_hlwd_remove(struct platform_device *pdev)
-{
-	return sdhci_pltfm_unregister(pdev);
-}
-
 static const struct of_device_id sdhci_hlwd_of_match[] = {
 	{ .compatible = "nintendo,hollywood-sdhci" },
 	{ }
@@ -93,7 +88,7 @@ static struct platform_driver sdhci_hlwd_driver = {
 		.pm = SDHCI_PLTFM_PMOPS,
 	},
 	.probe = sdhci_hlwd_probe,
-	.remove = sdhci_hlwd_remove,
+	.remove = sdhci_pltfm_unregister,
 };
 
 module_platform_driver(sdhci_hlwd_driver);
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 29eaff78238e..7a3fc16d0a6c 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -650,6 +650,7 @@ static int rtsx_probe_slot(struct sdhci_pci_slot *slot)
 
 static const struct sdhci_pci_fixes sdhci_rtsx = {
 	.quirks2	= SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+			SDHCI_QUIRK2_BROKEN_64_BIT_DMA |
 			SDHCI_QUIRK2_BROKEN_DDR50,
 	.probe_slot	= rtsx_probe_slot,
 };
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index c5b01d6bb85d..a207f5aaf62f 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -75,43 +75,41 @@ void sdhci_get_of_property(struct platform_device *pdev)
 	u32 bus_width;
 	int size;
 
-	if (of_device_is_available(np)) {
-		if (of_get_property(np, "sdhci,auto-cmd12", NULL))
-			host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+	if (of_get_property(np, "sdhci,auto-cmd12", NULL))
+		host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
 
-		if (of_get_property(np, "sdhci,1-bit-only", NULL) ||
-		    (of_property_read_u32(np, "bus-width", &bus_width) == 0 &&
-		    bus_width == 1))
-			host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+	if (of_get_property(np, "sdhci,1-bit-only", NULL) ||
+	    (of_property_read_u32(np, "bus-width", &bus_width) == 0 &&
+	    bus_width == 1))
+		host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
 
-		if (sdhci_of_wp_inverted(np))
-			host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
+	if (sdhci_of_wp_inverted(np))
+		host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
 
-		if (of_get_property(np, "broken-cd", NULL))
-			host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+	if (of_get_property(np, "broken-cd", NULL))
+		host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
 
-		if (of_get_property(np, "no-1-8-v", NULL))
-			host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
+	if (of_get_property(np, "no-1-8-v", NULL))
+		host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
 
-		if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
-			host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+	if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
+		host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
 
-		if (of_device_is_compatible(np, "fsl,p2020-esdhc") ||
-		    of_device_is_compatible(np, "fsl,p1010-esdhc") ||
-		    of_device_is_compatible(np, "fsl,t4240-esdhc") ||
-		    of_device_is_compatible(np, "fsl,mpc8536-esdhc"))
-			host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+	if (of_device_is_compatible(np, "fsl,p2020-esdhc") ||
+	    of_device_is_compatible(np, "fsl,p1010-esdhc") ||
+	    of_device_is_compatible(np, "fsl,t4240-esdhc") ||
+	    of_device_is_compatible(np, "fsl,mpc8536-esdhc"))
+		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
 
-		clk = of_get_property(np, "clock-frequency", &size);
-		if (clk && size == sizeof(*clk) && *clk)
-			pltfm_host->clock = be32_to_cpup(clk);
+	clk = of_get_property(np, "clock-frequency", &size);
+	if (clk && size == sizeof(*clk) && *clk)
+		pltfm_host->clock = be32_to_cpup(clk);
 
-		if (of_find_property(np, "keep-power-in-suspend", NULL))
-			host->mmc->pm_caps |= MMC_PM_KEEP_POWER;
+	if (of_find_property(np, "keep-power-in-suspend", NULL))
+		host->mmc->pm_caps |= MMC_PM_KEEP_POWER;
 
-		if (of_find_property(np, "enable-sdio-wakeup", NULL))
-			host->mmc->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
-	}
+	if (of_find_property(np, "enable-sdio-wakeup", NULL))
+		host->mmc->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
 }
 #else
 void sdhci_get_of_property(struct platform_device *pdev) {}
@@ -225,9 +223,11 @@ EXPORT_SYMBOL_GPL(sdhci_pltfm_register);
 int sdhci_pltfm_unregister(struct platform_device *pdev)
 {
 	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
 
 	sdhci_remove_host(host, dead);
+	clk_disable_unprepare(pltfm_host->clk);
 	sdhci_pltfm_free(pdev);
 
 	return 0;
diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c
index f6f82ec3618d..32848eb7ad80 100644
--- a/drivers/mmc/host/sdhci-sirf.c
+++ b/drivers/mmc/host/sdhci-sirf.c
@@ -20,17 +20,9 @@
 #define SIRF_TUNING_COUNT 128
 
 struct sdhci_sirf_priv {
-	struct clk *clk;
 	int gpio_cd;
 };
 
-static unsigned int sdhci_sirf_get_max_clk(struct sdhci_host *host)
-{
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct sdhci_sirf_priv *priv = sdhci_pltfm_priv(pltfm_host);
-	return clk_get_rate(priv->clk);
-}
-
 static void sdhci_sirf_set_bus_width(struct sdhci_host *host, int width)
 {
 	u8 ctrl;
@@ -56,7 +48,7 @@ static int sdhci_sirf_execute_tuning(struct sdhci_host *host, u32 opcode)
 	int tuning_seq_cnt = 3;
 	u8 phase, tuned_phases[SIRF_TUNING_COUNT];
 	u8 tuned_phase_cnt = 0;
-	int rc, longest_range = 0;
+	int rc = 0, longest_range = 0;
 	int start = -1, end = 0, tuning_value = -1, range = 0;
 	u16 clock_setting;
 	struct mmc_host *mmc = host->mmc;
@@ -68,7 +60,7 @@ retry:
 	phase = 0;
 	do {
 		sdhci_writel(host,
-			clock_setting | phase | (phase << 7) | (phase << 16),
+			clock_setting | phase,
 			SDHCI_CLK_DELAY_SETTING);
 
 		if (!mmc_send_tuning(mmc)) {
@@ -102,7 +94,7 @@ retry:
 		 */
 		phase = tuning_value;
 		sdhci_writel(host,
-			clock_setting | phase | (phase << 7) | (phase << 16),
+			clock_setting | phase,
 			SDHCI_CLK_DELAY_SETTING);
 
 		dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
@@ -122,7 +114,7 @@ retry:
 static struct sdhci_ops sdhci_sirf_ops = {
 	.platform_execute_tuning = sdhci_sirf_execute_tuning,
 	.set_clock = sdhci_set_clock,
-	.get_max_clock	= sdhci_sirf_get_max_clk,
+	.get_max_clock	= sdhci_pltfm_clk_get_max_clock,
 	.set_bus_width = sdhci_sirf_set_bus_width,
 	.reset = sdhci_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
@@ -162,13 +154,13 @@ static int sdhci_sirf_probe(struct platform_device *pdev)
 		return PTR_ERR(host);
 
 	pltfm_host = sdhci_priv(host);
+	pltfm_host->clk = clk;
 	priv = sdhci_pltfm_priv(pltfm_host);
-	priv->clk = clk;
 	priv->gpio_cd = gpio_cd;
 
 	sdhci_get_of_property(pdev);
 
-	ret = clk_prepare_enable(priv->clk);
+	ret = clk_prepare_enable(pltfm_host->clk);
 	if (ret)
 		goto err_clk_prepare;
 
@@ -195,37 +187,24 @@ static int sdhci_sirf_probe(struct platform_device *pdev)
 err_request_cd:
 	sdhci_remove_host(host, 0);
 err_sdhci_add:
-	clk_disable_unprepare(priv->clk);
+	clk_disable_unprepare(pltfm_host->clk);
 err_clk_prepare:
 	sdhci_pltfm_free(pdev);
 	return ret;
 }
 
-static int sdhci_sirf_remove(struct platform_device *pdev)
-{
-	struct sdhci_host *host = platform_get_drvdata(pdev);
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct sdhci_sirf_priv *priv = sdhci_pltfm_priv(pltfm_host);
-
-	sdhci_pltfm_unregister(pdev);
-
-	clk_disable_unprepare(priv->clk);
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int sdhci_sirf_suspend(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct sdhci_sirf_priv *priv = sdhci_pltfm_priv(pltfm_host);
 	int ret;
 
 	ret = sdhci_suspend_host(host);
 	if (ret)
 		return ret;
 
-	clk_disable(priv->clk);
+	clk_disable(pltfm_host->clk);
 
 	return 0;
 }
@@ -234,10 +213,9 @@ static int sdhci_sirf_resume(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct sdhci_sirf_priv *priv = sdhci_pltfm_priv(pltfm_host);
 	int ret;
 
-	ret = clk_enable(priv->clk);
+	ret = clk_enable(pltfm_host->clk);
 	if (ret) {
 		dev_dbg(dev, "Resume: Error enabling clock\n");
 		return ret;
@@ -264,7 +242,7 @@ static struct platform_driver sdhci_sirf_driver = {
 #endif
 	},
 	.probe		= sdhci_sirf_probe,
-	.remove		= sdhci_sirf_remove,
+	.remove		= sdhci_pltfm_unregister,
 };
 
 module_platform_driver(sdhci_sirf_driver);
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 22e58268545f..df088343d60f 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -26,14 +26,13 @@
 #include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/mmc/host.h>
-#include <linux/mmc/sdhci-spear.h>
 #include <linux/mmc/slot-gpio.h>
 #include <linux/io.h>
 #include "sdhci.h"
 
 struct spear_sdhci {
 	struct clk *clk;
-	struct sdhci_plat_data *data;
+	int card_int_gpio;
 };
 
 /* sdhci ops */
@@ -44,38 +43,20 @@ static const struct sdhci_ops sdhci_pltfm_ops = {
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
-#ifdef CONFIG_OF
-static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device *pdev)
+static void sdhci_probe_config_dt(struct device_node *np,
+				struct spear_sdhci *host)
 {
-	struct device_node *np = pdev->dev.of_node;
-	struct sdhci_plat_data *pdata = NULL;
 	int cd_gpio;
 
 	cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
 	if (!gpio_is_valid(cd_gpio))
 		cd_gpio = -1;
 
-	/* If pdata is required */
-	if (cd_gpio != -1) {
-		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-		if (!pdata)
-			dev_err(&pdev->dev, "DT: kzalloc failed\n");
-		else
-			pdata->card_int_gpio = cd_gpio;
-	}
-
-	return pdata;
-}
-#else
-static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device *pdev)
-{
-	return ERR_PTR(-ENOSYS);
+	host->card_int_gpio = cd_gpio;
 }
-#endif
 
 static int sdhci_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	struct sdhci_host *host;
 	struct resource *iomem;
 	struct spear_sdhci *sdhci;
@@ -124,28 +105,18 @@ static int sdhci_probe(struct platform_device *pdev)
 		dev_dbg(&pdev->dev, "Error setting desired clk, clk=%lu\n",
 				clk_get_rate(sdhci->clk));
 
-	if (np) {
-		sdhci->data = sdhci_probe_config_dt(pdev);
-		if (IS_ERR(sdhci->data)) {
-			dev_err(&pdev->dev, "DT: Failed to get pdata\n");
-			goto disable_clk;
-		}
-	} else {
-		sdhci->data = dev_get_platdata(&pdev->dev);
-	}
-
+	sdhci_probe_config_dt(pdev->dev.of_node, sdhci);
 	/*
 	 * It is optional to use GPIOs for sdhci card detection. If
-	 * sdhci->data is NULL, then use original sdhci lines otherwise
+	 * sdhci->card_int_gpio < 0, then use original sdhci lines otherwise
 	 * GPIO lines. We use the built-in GPIO support for this.
 	 */
-	if (sdhci->data && sdhci->data->card_int_gpio >= 0) {
-		ret = mmc_gpio_request_cd(host->mmc,
-					  sdhci->data->card_int_gpio, 0);
+	if (sdhci->card_int_gpio >= 0) {
+		ret = mmc_gpio_request_cd(host->mmc, sdhci->card_int_gpio, 0);
 		if (ret < 0) {
 			dev_dbg(&pdev->dev,
 				"failed to request card-detect gpio%d\n",
-				sdhci->data->card_int_gpio);
+				sdhci->card_int_gpio);
 			goto disable_clk;
 		}
 	}
diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c
index 882b07e9667e..682f2bb0f4bf 100644
--- a/drivers/mmc/host/sdhci-st.c
+++ b/drivers/mmc/host/sdhci-st.c
@@ -23,9 +23,295 @@
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/mmc/host.h>
-
+#include <linux/reset.h>
 #include "sdhci-pltfm.h"
 
+struct st_mmc_platform_data {
+	struct  reset_control *rstc;
+	void __iomem *top_ioaddr;
+};
+
+/* MMCSS glue logic to setup the HC on some ST SoCs (e.g. STiH407 family) */
+
+#define ST_MMC_CCONFIG_REG_1		0x400
+#define ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT	BIT(24)
+#define ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ	BIT(12)
+#define ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT	BIT(8)
+#define ST_MMC_CCONFIG_ASYNC_WAKEUP	BIT(0)
+#define ST_MMC_CCONFIG_1_DEFAULT	\
+				((ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT) | \
+				 (ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ) | \
+				 (ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT))
+
+#define ST_MMC_CCONFIG_REG_2		0x404
+#define ST_MMC_CCONFIG_HIGH_SPEED	BIT(28)
+#define ST_MMC_CCONFIG_ADMA2		BIT(24)
+#define ST_MMC_CCONFIG_8BIT		BIT(20)
+#define ST_MMC_CCONFIG_MAX_BLK_LEN	16
+#define  MAX_BLK_LEN_1024		1
+#define  MAX_BLK_LEN_2048		2
+#define BASE_CLK_FREQ_200		0xc8
+#define BASE_CLK_FREQ_100		0x64
+#define BASE_CLK_FREQ_50		0x32
+#define ST_MMC_CCONFIG_2_DEFAULT \
+	(ST_MMC_CCONFIG_HIGH_SPEED | ST_MMC_CCONFIG_ADMA2 | \
+	 ST_MMC_CCONFIG_8BIT | \
+	 (MAX_BLK_LEN_1024 << ST_MMC_CCONFIG_MAX_BLK_LEN))
+
+#define ST_MMC_CCONFIG_REG_3			0x408
+#define ST_MMC_CCONFIG_EMMC_SLOT_TYPE		BIT(28)
+#define ST_MMC_CCONFIG_64BIT			BIT(24)
+#define ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT	BIT(20)
+#define ST_MMC_CCONFIG_1P8_VOLT			BIT(16)
+#define ST_MMC_CCONFIG_3P0_VOLT			BIT(12)
+#define ST_MMC_CCONFIG_3P3_VOLT			BIT(8)
+#define ST_MMC_CCONFIG_SUSP_RES_SUPPORT		BIT(4)
+#define ST_MMC_CCONFIG_SDMA			BIT(0)
+#define ST_MMC_CCONFIG_3_DEFAULT	\
+			 (ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT	| \
+			  ST_MMC_CCONFIG_3P3_VOLT		| \
+			  ST_MMC_CCONFIG_SUSP_RES_SUPPORT	| \
+			  ST_MMC_CCONFIG_SDMA)
+
+#define ST_MMC_CCONFIG_REG_4	0x40c
+#define ST_MMC_CCONFIG_D_DRIVER	BIT(20)
+#define ST_MMC_CCONFIG_C_DRIVER	BIT(16)
+#define ST_MMC_CCONFIG_A_DRIVER	BIT(12)
+#define ST_MMC_CCONFIG_DDR50	BIT(8)
+#define ST_MMC_CCONFIG_SDR104	BIT(4)
+#define ST_MMC_CCONFIG_SDR50	BIT(0)
+#define ST_MMC_CCONFIG_4_DEFAULT	0
+
+#define ST_MMC_CCONFIG_REG_5		0x410
+#define ST_MMC_CCONFIG_TUNING_FOR_SDR50	BIT(8)
+#define RETUNING_TIMER_CNT_MAX		0xf
+#define ST_MMC_CCONFIG_5_DEFAULT	0
+
+/* I/O configuration for Arasan IP */
+#define ST_MMC_GP_OUTPUT	0x450
+#define ST_MMC_GP_OUTPUT_CD	BIT(12)
+
+#define ST_MMC_STATUS_R		0x460
+
+#define ST_TOP_MMC_DLY_FIX_OFF(x)	(x - 0x8)
+
+/* TOP config registers to manage static and dynamic delay */
+#define ST_TOP_MMC_TX_CLK_DLY			ST_TOP_MMC_DLY_FIX_OFF(0x8)
+#define ST_TOP_MMC_RX_CLK_DLY			ST_TOP_MMC_DLY_FIX_OFF(0xc)
+/* MMC delay control register */
+#define ST_TOP_MMC_DLY_CTRL			ST_TOP_MMC_DLY_FIX_OFF(0x18)
+#define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_CMD	BIT(0)
+#define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_PH_SEL	BIT(1)
+#define ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE	BIT(8)
+#define ST_TOP_MMC_DLY_CTRL_RX_DLL_ENABLE	BIT(9)
+#define ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY	BIT(10)
+#define ST_TOP_MMC_START_DLL_LOCK		BIT(11)
+
+/* register to provide the phase-shift value for DLL */
+#define ST_TOP_MMC_TX_DLL_STEP_DLY		ST_TOP_MMC_DLY_FIX_OFF(0x1c)
+#define ST_TOP_MMC_RX_DLL_STEP_DLY		ST_TOP_MMC_DLY_FIX_OFF(0x20)
+#define ST_TOP_MMC_RX_CMD_STEP_DLY		ST_TOP_MMC_DLY_FIX_OFF(0x24)
+
+/* phase shift delay on the tx clk 2.188ns */
+#define ST_TOP_MMC_TX_DLL_STEP_DLY_VALID	0x6
+
+#define ST_TOP_MMC_DLY_MAX			0xf
+
+#define ST_TOP_MMC_DYN_DLY_CONF	\
+		(ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE | \
+		 ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY | \
+		 ST_TOP_MMC_START_DLL_LOCK)
+
+/*
+ * For clock speeds greater than 90MHz, we need to check that the
+ * DLL procedure has finished before switching to ultra-speed modes.
+ */
+#define	CLK_TO_CHECK_DLL_LOCK	90000000
+
+static inline void st_mmcss_set_static_delay(void __iomem *ioaddr)
+{
+	if (!ioaddr)
+		return;
+
+	writel_relaxed(0x0, ioaddr + ST_TOP_MMC_DLY_CTRL);
+	writel_relaxed(ST_TOP_MMC_DLY_MAX,
+			ioaddr + ST_TOP_MMC_TX_CLK_DLY);
+}
+
+/**
+ * st_mmcss_cconfig: configure the Arasan HC inside the flashSS.
+ * @np: dt device node.
+ * @host: sdhci host
+ * Description: this function is to configure the Arasan host controller.
+ * On some ST SoCs, i.e. STiH407 family, the MMC devices inside a dedicated
+ * flashSS sub-system which needs to be configured to be compliant to eMMC 4.5
+ * or eMMC4.3.  This has to be done before registering the sdhci host.
+ */
+static void st_mmcss_cconfig(struct device_node *np, struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct mmc_host *mhost = host->mmc;
+	u32 cconf2, cconf3, cconf4, cconf5;
+
+	if (!of_device_is_compatible(np, "st,sdhci-stih407"))
+		return;
+
+	cconf2 = ST_MMC_CCONFIG_2_DEFAULT;
+	cconf3 = ST_MMC_CCONFIG_3_DEFAULT;
+	cconf4 = ST_MMC_CCONFIG_4_DEFAULT;
+	cconf5 = ST_MMC_CCONFIG_5_DEFAULT;
+
+	writel_relaxed(ST_MMC_CCONFIG_1_DEFAULT,
+			host->ioaddr + ST_MMC_CCONFIG_REG_1);
+
+	/* Set clock frequency, default to 50MHz if max-frequency is not
+	 * provided */
+
+	switch (mhost->f_max) {
+	case 200000000:
+		clk_set_rate(pltfm_host->clk, mhost->f_max);
+		cconf2 |= BASE_CLK_FREQ_200;
+		break;
+	case 100000000:
+		clk_set_rate(pltfm_host->clk, mhost->f_max);
+		cconf2 |= BASE_CLK_FREQ_100;
+		break;
+	default:
+		clk_set_rate(pltfm_host->clk, 50000000);
+		cconf2 |= BASE_CLK_FREQ_50;
+	}
+
+	writel_relaxed(cconf2, host->ioaddr + ST_MMC_CCONFIG_REG_2);
+
+	if (mhost->caps & MMC_CAP_NONREMOVABLE)
+		cconf3 |= ST_MMC_CCONFIG_EMMC_SLOT_TYPE;
+	else
+		/* CARD _D ET_CTRL */
+		writel_relaxed(ST_MMC_GP_OUTPUT_CD,
+				host->ioaddr + ST_MMC_GP_OUTPUT);
+
+	if (mhost->caps & MMC_CAP_UHS_SDR50) {
+		/* use 1.8V */
+		cconf3 |= ST_MMC_CCONFIG_1P8_VOLT;
+		cconf4 |= ST_MMC_CCONFIG_SDR50;
+		/* Use tuning */
+		cconf5 |= ST_MMC_CCONFIG_TUNING_FOR_SDR50;
+		/* Max timeout for retuning */
+		cconf5 |= RETUNING_TIMER_CNT_MAX;
+	}
+
+	if (mhost->caps & MMC_CAP_UHS_SDR104) {
+		/*
+		 * SDR104 implies the HC can support HS200 mode, so
+		 * it's mandatory to use 1.8V
+		 */
+		cconf3 |= ST_MMC_CCONFIG_1P8_VOLT;
+		cconf4 |= ST_MMC_CCONFIG_SDR104;
+		/* Max timeout for retuning */
+		cconf5 |= RETUNING_TIMER_CNT_MAX;
+	}
+
+	if (mhost->caps & MMC_CAP_UHS_DDR50)
+		cconf4 |= ST_MMC_CCONFIG_DDR50;
+
+	writel_relaxed(cconf3, host->ioaddr + ST_MMC_CCONFIG_REG_3);
+	writel_relaxed(cconf4, host->ioaddr + ST_MMC_CCONFIG_REG_4);
+	writel_relaxed(cconf5, host->ioaddr + ST_MMC_CCONFIG_REG_5);
+}
+
+static inline void st_mmcss_set_dll(void __iomem *ioaddr)
+{
+	if (!ioaddr)
+		return;
+
+	writel_relaxed(ST_TOP_MMC_DYN_DLY_CONF,	ioaddr + ST_TOP_MMC_DLY_CTRL);
+	writel_relaxed(ST_TOP_MMC_TX_DLL_STEP_DLY_VALID,
+			ioaddr + ST_TOP_MMC_TX_DLL_STEP_DLY);
+}
+
+static int st_mmcss_lock_dll(void __iomem *ioaddr)
+{
+	unsigned long curr, value;
+	unsigned long finish = jiffies + HZ;
+
+	/* Checks if the DLL procedure is finished */
+	do {
+		curr = jiffies;
+		value = readl(ioaddr + ST_MMC_STATUS_R);
+		if (value & 0x1)
+			return 0;
+
+		cpu_relax();
+	} while (!time_after_eq(curr, finish));
+
+	return -EBUSY;
+}
+
+static int sdhci_st_set_dll_for_clock(struct sdhci_host *host)
+{
+	int ret = 0;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct st_mmc_platform_data *pdata = pltfm_host->priv;
+
+	if (host->clock > CLK_TO_CHECK_DLL_LOCK) {
+		st_mmcss_set_dll(pdata->top_ioaddr);
+		ret = st_mmcss_lock_dll(host->ioaddr);
+	}
+
+	return ret;
+}
+
+static void sdhci_st_set_uhs_signaling(struct sdhci_host *host,
+					unsigned int uhs)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct st_mmc_platform_data *pdata = pltfm_host->priv;
+	u16 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+	int ret = 0;
+
+	/* Select Bus Speed Mode for host */
+	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+	switch (uhs) {
+	/*
+	 * Set V18_EN -- UHS modes do not work without this.
+	 * does not change signaling voltage
+	 */
+
+	case MMC_TIMING_UHS_SDR12:
+		st_mmcss_set_static_delay(pdata->top_ioaddr);
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR12 | SDHCI_CTRL_VDD_180;
+		break;
+	case MMC_TIMING_UHS_SDR25:
+		st_mmcss_set_static_delay(pdata->top_ioaddr);
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR25 | SDHCI_CTRL_VDD_180;
+		break;
+	case MMC_TIMING_UHS_SDR50:
+		st_mmcss_set_static_delay(pdata->top_ioaddr);
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
+		ret = sdhci_st_set_dll_for_clock(host);
+		break;
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS200:
+		st_mmcss_set_static_delay(pdata->top_ioaddr);
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
+		ret =  sdhci_st_set_dll_for_clock(host);
+		break;
+	case MMC_TIMING_UHS_DDR50:
+	case MMC_TIMING_MMC_DDR52:
+		st_mmcss_set_static_delay(pdata->top_ioaddr);
+		ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
+		break;
+	}
+
+	if (ret)
+		dev_warn(mmc_dev(host->mmc), "Error setting dll for clock "
+						"(uhs %d)\n", uhs);
+
+	dev_dbg(mmc_dev(host->mmc), "uhs %d, ctrl_2 %04X\n", uhs, ctrl_2);
+
+	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+
 static u32 sdhci_st_readl(struct sdhci_host *host, int reg)
 {
 	u32 ret;
@@ -48,22 +334,33 @@ static const struct sdhci_ops sdhci_st_ops = {
 	.set_bus_width = sdhci_set_bus_width,
 	.read_l = sdhci_st_readl,
 	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_st_set_uhs_signaling,
 };
 
 static const struct sdhci_pltfm_data sdhci_st_pdata = {
 	.ops = &sdhci_st_ops,
 	.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
-	    SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+		SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+		SDHCI_QUIRK_NO_HISPD_BIT,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+		SDHCI_QUIRK2_STOP_WITH_TC,
 };
 
 
 static int sdhci_st_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct sdhci_host *host;
+	struct st_mmc_platform_data *pdata;
 	struct sdhci_pltfm_host *pltfm_host;
 	struct clk *clk;
 	int ret = 0;
 	u16 host_version;
+	struct resource *res;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
 
 	clk =  devm_clk_get(&pdev->dev, "mmc");
 	if (IS_ERR(clk)) {
@@ -71,10 +368,17 @@ static int sdhci_st_probe(struct platform_device *pdev)
 		return PTR_ERR(clk);
 	}
 
+	pdata->rstc = devm_reset_control_get(&pdev->dev, NULL);
+	if (IS_ERR(pdata->rstc))
+		pdata->rstc = NULL;
+	else
+		reset_control_deassert(pdata->rstc);
+
 	host = sdhci_pltfm_init(pdev, &sdhci_st_pdata, 0);
 	if (IS_ERR(host)) {
 		dev_err(&pdev->dev, "Failed sdhci_pltfm_init\n");
-		return PTR_ERR(host);
+		ret = PTR_ERR(host);
+		goto err_pltfm_init;
 	}
 
 	ret = mmc_of_parse(host->mmc);
@@ -85,9 +389,22 @@ static int sdhci_st_probe(struct platform_device *pdev)
 
 	clk_prepare_enable(clk);
 
+	/* Configure the FlashSS Top registers for setting eMMC TX/RX delay */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "top-mmc-delay");
+	pdata->top_ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pdata->top_ioaddr)) {
+		dev_warn(&pdev->dev, "FlashSS Top Dly registers not available");
+		pdata->top_ioaddr = NULL;
+	}
+
 	pltfm_host = sdhci_priv(host);
+	pltfm_host->priv = pdata;
 	pltfm_host->clk = clk;
 
+	/* Configure the Arasan HC inside the flashSS */
+	st_mmcss_cconfig(np, host);
+
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed sdhci_add_host\n");
@@ -109,6 +426,9 @@ err_out:
 	clk_disable_unprepare(clk);
 err_of:
 	sdhci_pltfm_free(pdev);
+err_pltfm_init:
+	if (pdata->rstc)
+		reset_control_assert(pdata->rstc);
 
 	return ret;
 }
@@ -117,10 +437,15 @@ static int sdhci_st_remove(struct platform_device *pdev)
 {
 	struct sdhci_host *host = platform_get_drvdata(pdev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct st_mmc_platform_data *pdata = pltfm_host->priv;
+	int ret;
 
-	clk_disable_unprepare(pltfm_host->clk);
+	ret = sdhci_pltfm_unregister(pdev);
+
+	if (pdata->rstc)
+		reset_control_assert(pdata->rstc);
 
-	return sdhci_pltfm_unregister(pdev);
+	return ret;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -128,11 +453,15 @@ static int sdhci_st_suspend(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct st_mmc_platform_data *pdata = pltfm_host->priv;
 	int ret = sdhci_suspend_host(host);
 
 	if (ret)
 		goto out;
 
+	if (pdata->rstc)
+		reset_control_assert(pdata->rstc);
+
 	clk_disable_unprepare(pltfm_host->clk);
 out:
 	return ret;
@@ -142,9 +471,16 @@ static int sdhci_st_resume(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct st_mmc_platform_data *pdata = pltfm_host->priv;
+	struct device_node *np = dev->of_node;
 
 	clk_prepare_enable(pltfm_host->clk);
 
+	if (pdata->rstc)
+		reset_control_deassert(pdata->rstc);
+
+	st_mmcss_cconfig(np, host);
+
 	return sdhci_resume_host(host);
 }
 #endif
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index f3778d58d1cd..ad28b49f0203 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -20,11 +20,10 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio.h>
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/slot-gpio.h>
+#include <linux/gpio/consumer.h>
 
 #include "sdhci-pltfm.h"
 
@@ -41,7 +40,6 @@
 #define NVQUIRK_DISABLE_SDR50		BIT(3)
 #define NVQUIRK_DISABLE_SDR104		BIT(4)
 #define NVQUIRK_DISABLE_DDR50		BIT(5)
-#define NVQUIRK_SHADOW_XFER_MODE_REG	BIT(6)
 
 struct sdhci_tegra_soc_data {
 	const struct sdhci_pltfm_data *pdata;
@@ -50,7 +48,7 @@ struct sdhci_tegra_soc_data {
 
 struct sdhci_tegra {
 	const struct sdhci_tegra_soc_data *soc_data;
-	int power_gpio;
+	struct gpio_desc *power_gpio;
 };
 
 static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
@@ -71,23 +69,19 @@ static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
 static void tegra_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct sdhci_tegra *tegra_host = pltfm_host->priv;
-	const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
 
-	if (soc_data->nvquirks & NVQUIRK_SHADOW_XFER_MODE_REG) {
-		switch (reg) {
-		case SDHCI_TRANSFER_MODE:
-			/*
-			 * Postpone this write, we must do it together with a
-			 * command write that is down below.
-			 */
-			pltfm_host->xfer_mode_shadow = val;
-			return;
-		case SDHCI_COMMAND:
-			writel((val << 16) | pltfm_host->xfer_mode_shadow,
-				host->ioaddr + SDHCI_TRANSFER_MODE);
-			return;
-		}
+	switch (reg) {
+	case SDHCI_TRANSFER_MODE:
+		/*
+		 * Postpone this write, we must do it together with a
+		 * command write that is down below.
+		 */
+		pltfm_host->xfer_mode_shadow = val;
+		return;
+	case SDHCI_COMMAND:
+		writel((val << 16) | pltfm_host->xfer_mode_shadow,
+			host->ioaddr + SDHCI_TRANSFER_MODE);
+		return;
 	}
 
 	writew(val, host->ioaddr + reg);
@@ -173,7 +167,6 @@ static void tegra_sdhci_set_bus_width(struct sdhci_host *host, int bus_width)
 static const struct sdhci_ops tegra_sdhci_ops = {
 	.get_ro     = tegra_sdhci_get_ro,
 	.read_w     = tegra_sdhci_readw,
-	.write_w    = tegra_sdhci_writew,
 	.write_l    = tegra_sdhci_writel,
 	.set_clock  = sdhci_set_clock,
 	.set_bus_width = tegra_sdhci_set_bus_width,
@@ -214,6 +207,18 @@ static struct sdhci_tegra_soc_data soc_data_tegra30 = {
 		    NVQUIRK_DISABLE_SDR104,
 };
 
+static const struct sdhci_ops tegra114_sdhci_ops = {
+	.get_ro     = tegra_sdhci_get_ro,
+	.read_w     = tegra_sdhci_readw,
+	.write_w    = tegra_sdhci_writew,
+	.write_l    = tegra_sdhci_writel,
+	.set_clock  = sdhci_set_clock,
+	.set_bus_width = tegra_sdhci_set_bus_width,
+	.reset      = tegra_sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+};
+
 static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
 	.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
 		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
@@ -221,15 +226,14 @@ static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
 		  SDHCI_QUIRK_NO_HISPD_BIT |
 		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
 		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
-	.ops  = &tegra_sdhci_ops,
+	.ops  = &tegra114_sdhci_ops,
 };
 
 static struct sdhci_tegra_soc_data soc_data_tegra114 = {
 	.pdata = &sdhci_tegra114_pdata,
 	.nvquirks = NVQUIRK_DISABLE_SDR50 |
 		    NVQUIRK_DISABLE_DDR50 |
-		    NVQUIRK_DISABLE_SDR104 |
-		    NVQUIRK_SHADOW_XFER_MODE_REG,
+		    NVQUIRK_DISABLE_SDR104,
 };
 
 static const struct of_device_id sdhci_tegra_dt_match[] = {
@@ -241,17 +245,6 @@ static const struct of_device_id sdhci_tegra_dt_match[] = {
 };
 MODULE_DEVICE_TABLE(of, sdhci_tegra_dt_match);
 
-static int sdhci_tegra_parse_dt(struct device *dev)
-{
-	struct device_node *np = dev->of_node;
-	struct sdhci_host *host = dev_get_drvdata(dev);
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct sdhci_tegra *tegra_host = pltfm_host->priv;
-
-	tegra_host->power_gpio = of_get_named_gpio(np, "power-gpios", 0);
-	return mmc_of_parse(host->mmc);
-}
-
 static int sdhci_tegra_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *match;
@@ -281,21 +274,18 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 	tegra_host->soc_data = soc_data;
 	pltfm_host->priv = tegra_host;
 
-	rc = sdhci_tegra_parse_dt(&pdev->dev);
+	rc = mmc_of_parse(host->mmc);
 	if (rc)
 		goto err_parse_dt;
 
-	if (gpio_is_valid(tegra_host->power_gpio)) {
-		rc = gpio_request(tegra_host->power_gpio, "sdhci_power");
-		if (rc) {
-			dev_err(mmc_dev(host->mmc),
-				"failed to allocate power gpio\n");
-			goto err_power_req;
-		}
-		gpio_direction_output(tegra_host->power_gpio, 1);
+	tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",
+							 GPIOD_OUT_HIGH);
+	if (IS_ERR(tegra_host->power_gpio)) {
+		rc = PTR_ERR(tegra_host->power_gpio);
+		goto err_power_req;
 	}
 
-	clk = clk_get(mmc_dev(host->mmc), NULL);
+	clk = devm_clk_get(mmc_dev(host->mmc), NULL);
 	if (IS_ERR(clk)) {
 		dev_err(mmc_dev(host->mmc), "clk err\n");
 		rc = PTR_ERR(clk);
@@ -312,10 +302,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 
 err_add_host:
 	clk_disable_unprepare(pltfm_host->clk);
-	clk_put(pltfm_host->clk);
 err_clk_get:
-	if (gpio_is_valid(tegra_host->power_gpio))
-		gpio_free(tegra_host->power_gpio);
 err_power_req:
 err_parse_dt:
 err_alloc_tegra_host:
@@ -323,26 +310,6 @@ err_alloc_tegra_host:
 	return rc;
 }
 
-static int sdhci_tegra_remove(struct platform_device *pdev)
-{
-	struct sdhci_host *host = platform_get_drvdata(pdev);
-	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-	struct sdhci_tegra *tegra_host = pltfm_host->priv;
-	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
-
-	sdhci_remove_host(host, dead);
-
-	if (gpio_is_valid(tegra_host->power_gpio))
-		gpio_free(tegra_host->power_gpio);
-
-	clk_disable_unprepare(pltfm_host->clk);
-	clk_put(pltfm_host->clk);
-
-	sdhci_pltfm_free(pdev);
-
-	return 0;
-}
-
 static struct platform_driver sdhci_tegra_driver = {
 	.driver		= {
 		.name	= "sdhci-tegra",
@@ -350,7 +317,7 @@ static struct platform_driver sdhci_tegra_driver = {
 		.pm	= SDHCI_PLTFM_PMOPS,
 	},
 	.probe		= sdhci_tegra_probe,
-	.remove		= sdhci_tegra_remove,
+	.remove		= sdhci_pltfm_unregister,
 };
 
 module_platform_driver(sdhci_tegra_driver);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 0ad412a4876f..c80287a02735 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -28,6 +28,7 @@
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/sdio.h>
 #include <linux/mmc/slot-gpio.h>
 
 #include "sdhci.h"
@@ -56,6 +57,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
 static int sdhci_pre_dma_transfer(struct sdhci_host *host,
 					struct mmc_data *data,
 					struct sdhci_host_next *next);
+static int sdhci_do_get_cd(struct sdhci_host *host);
 
 #ifdef CONFIG_PM
 static int sdhci_runtime_pm_get(struct sdhci_host *host);
@@ -931,7 +933,8 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
 		 * If we are sending CMD23, CMD12 never gets sent
 		 * on successful completion (so no Auto-CMD12).
 		 */
-		if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12))
+		if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12) &&
+		    (cmd->opcode != SD_IO_RW_EXTENDED))
 			mode |= SDHCI_TRNS_AUTO_CMD12;
 		else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
 			mode |= SDHCI_TRNS_AUTO_CMD23;
@@ -1356,7 +1359,8 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 	sdhci_runtime_pm_get(host);
 
-	present = mmc_gpio_get_cd(host->mmc);
+	/* Firstly check card presence */
+	present = sdhci_do_get_cd(host);
 
 	spin_lock_irqsave(&host->lock, flags);
 
@@ -1379,22 +1383,6 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 	host->mrq = mrq;
 
-	/*
-	 * Firstly check card presence from cd-gpio.  The return could
-	 * be one of the following possibilities:
-	 *     negative: cd-gpio is not available
-	 *     zero: cd-gpio is used, and card is removed
-	 *     one: cd-gpio is used, and card is present
-	 */
-	if (present < 0) {
-		/* If polling, assume that the card is always present. */
-		if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
-			present = 1;
-		else
-			present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
-					SDHCI_CARD_PRESENT;
-	}
-
 	if (!present || host->flags & SDHCI_DEVICE_DEAD) {
 		host->mrq->cmd->error = -ENOMEDIUM;
 		tasklet_schedule(&host->finish_tasklet);
@@ -3164,7 +3152,8 @@ int sdhci_add_host(struct sdhci_host *host)
 	/* Auto-CMD23 stuff only works in ADMA or PIO. */
 	if ((host->version >= SDHCI_SPEC_300) &&
 	    ((host->flags & SDHCI_USE_ADMA) ||
-	     !(host->flags & SDHCI_USE_SDMA))) {
+	     !(host->flags & SDHCI_USE_SDMA)) &&
+	     !(host->quirks2 & SDHCI_QUIRK2_ACMD23_BROKEN)) {
 		host->flags |= SDHCI_AUTO_CMD23;
 		DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc));
 	} else {
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 0315e1844330..e639b7f435e5 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -18,7 +18,7 @@
 #include <linux/types.h>
 #include <linux/io.h>
 
-#include <linux/mmc/sdhci.h>
+#include <linux/mmc/host.h>
 
 /*
  * Controller registers
@@ -309,6 +309,207 @@ struct sdhci_adma2_64_desc {
  */
 #define SDHCI_MAX_SEGS		128
 
+struct sdhci_host_next {
+	unsigned int	sg_count;
+	s32		cookie;
+};
+
+struct sdhci_host {
+	/* Data set by hardware interface driver */
+	const char *hw_name;	/* Hardware bus name */
+
+	unsigned int quirks;	/* Deviations from spec. */
+
+/* Controller doesn't honor resets unless we touch the clock register */
+#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
+/* Controller has bad caps bits, but really supports DMA */
+#define SDHCI_QUIRK_FORCE_DMA				(1<<1)
+/* Controller doesn't like to be reset when there is no card inserted. */
+#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
+/* Controller doesn't like clearing the power reg before a change */
+#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
+/* Controller has flaky internal state so reset it on each ios change */
+#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1<<4)
+/* Controller has an unusable DMA engine */
+#define SDHCI_QUIRK_BROKEN_DMA				(1<<5)
+/* Controller has an unusable ADMA engine */
+#define SDHCI_QUIRK_BROKEN_ADMA				(1<<6)
+/* Controller can only DMA from 32-bit aligned addresses */
+#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1<<7)
+/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<8)
+/* Controller can only ADMA chunks that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1<<9)
+/* Controller needs to be reset after each request to stay stable */
+#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<10)
+/* Controller needs voltage and power writes to happen separately */
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
+/* Controller provides an incorrect timeout value for transfers */
+#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
+/* Controller has an issue with buffer bits for small transfers */
+#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
+/* Controller does not provide transfer-complete interrupt when not busy */
+#define SDHCI_QUIRK_NO_BUSY_IRQ				(1<<14)
+/* Controller has unreliable card detection */
+#define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1<<15)
+/* Controller reports inverted write-protect state */
+#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1<<16)
+/* Controller does not like fast PIO transfers */
+#define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1<<18)
+/* Controller has to be forced to use block size of 2048 bytes */
+#define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
+/* Controller cannot do multi-block transfers */
+#define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
+/* Controller can only handle 1-bit data transfers */
+#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
+/* Controller needs 10ms delay between applying power and clock */
+#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
+/* Controller uses SDCLK instead of TMCLK for data timeouts */
+#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1<<24)
+/* Controller reports wrong base clock capability */
+#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1<<25)
+/* Controller cannot support End Attribute in NOP ADMA descriptor */
+#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<26)
+/* Controller is missing device caps. Use caps provided by host */
+#define SDHCI_QUIRK_MISSING_CAPS			(1<<27)
+/* Controller uses Auto CMD12 command to stop the transfer */
+#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1<<28)
+/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
+#define SDHCI_QUIRK_NO_HISPD_BIT			(1<<29)
+/* Controller treats ADMA descriptors with length 0000h incorrectly */
+#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC		(1<<30)
+/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
+#define SDHCI_QUIRK_UNSTABLE_RO_DETECT			(1<<31)
+
+	unsigned int quirks2;	/* More deviations from spec. */
+
+#define SDHCI_QUIRK2_HOST_OFF_CARD_ON			(1<<0)
+#define SDHCI_QUIRK2_HOST_NO_CMD23			(1<<1)
+/* The system physically doesn't support 1.8v, even if the host does */
+#define SDHCI_QUIRK2_NO_1_8_V				(1<<2)
+#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN		(1<<3)
+#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON		(1<<4)
+/* Controller has a non-standard host control register */
+#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL		(1<<5)
+/* Controller does not support HS200 */
+#define SDHCI_QUIRK2_BROKEN_HS200			(1<<6)
+/* Controller does not support DDR50 */
+#define SDHCI_QUIRK2_BROKEN_DDR50			(1<<7)
+/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
+#define SDHCI_QUIRK2_STOP_WITH_TC			(1<<8)
+/* Controller does not support 64-bit DMA */
+#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA			(1<<9)
+/* need clear transfer mode register before send cmd */
+#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD	(1<<10)
+/* Capability register bit-63 indicates HS400 support */
+#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400		(1<<11)
+/* forced tuned clock */
+#define SDHCI_QUIRK2_TUNING_WORK_AROUND			(1<<12)
+/* disable the block count for single block transactions */
+#define SDHCI_QUIRK2_SUPPORT_SINGLE			(1<<13)
+/* Controller broken with using ACMD23 */
+#define SDHCI_QUIRK2_ACMD23_BROKEN			(1<<14)
+
+	int irq;		/* Device IRQ */
+	void __iomem *ioaddr;	/* Mapped address */
+
+	const struct sdhci_ops *ops;	/* Low level hw interface */
+
+	/* Internal data */
+	struct mmc_host *mmc;	/* MMC structure */
+	u64 dma_mask;		/* custom DMA mask */
+
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+	struct led_classdev led;	/* LED control */
+	char led_name[32];
+#endif
+
+	spinlock_t lock;	/* Mutex */
+
+	int flags;		/* Host attributes */
+#define SDHCI_USE_SDMA		(1<<0)	/* Host is SDMA capable */
+#define SDHCI_USE_ADMA		(1<<1)	/* Host is ADMA capable */
+#define SDHCI_REQ_USE_DMA	(1<<2)	/* Use DMA for this req. */
+#define SDHCI_DEVICE_DEAD	(1<<3)	/* Device unresponsive */
+#define SDHCI_SDR50_NEEDS_TUNING (1<<4)	/* SDR50 needs tuning */
+#define SDHCI_NEEDS_RETUNING	(1<<5)	/* Host needs retuning */
+#define SDHCI_AUTO_CMD12	(1<<6)	/* Auto CMD12 support */
+#define SDHCI_AUTO_CMD23	(1<<7)	/* Auto CMD23 support */
+#define SDHCI_PV_ENABLED	(1<<8)	/* Preset value enabled */
+#define SDHCI_SDIO_IRQ_ENABLED	(1<<9)	/* SDIO irq enabled */
+#define SDHCI_SDR104_NEEDS_TUNING (1<<10)	/* SDR104/HS200 needs tuning */
+#define SDHCI_USING_RETUNING_TIMER (1<<11)	/* Host is using a retuning timer for the card */
+#define SDHCI_USE_64_BIT_DMA	(1<<12)	/* Use 64-bit DMA */
+#define SDHCI_HS400_TUNING	(1<<13)	/* Tuning for HS400 */
+
+	unsigned int version;	/* SDHCI spec. version */
+
+	unsigned int max_clk;	/* Max possible freq (MHz) */
+	unsigned int timeout_clk;	/* Timeout freq (KHz) */
+	unsigned int clk_mul;	/* Clock Muliplier value */
+
+	unsigned int clock;	/* Current clock (MHz) */
+	u8 pwr;			/* Current voltage */
+
+	bool runtime_suspended;	/* Host is runtime suspended */
+	bool bus_on;		/* Bus power prevents runtime suspend */
+	bool preset_enabled;	/* Preset is enabled */
+
+	struct mmc_request *mrq;	/* Current request */
+	struct mmc_command *cmd;	/* Current command */
+	struct mmc_data *data;	/* Current data request */
+	unsigned int data_early:1;	/* Data finished before cmd */
+	unsigned int busy_handle:1;	/* Handling the order of Busy-end */
+
+	struct sg_mapping_iter sg_miter;	/* SG state for PIO */
+	unsigned int blocks;	/* remaining PIO blocks */
+
+	int sg_count;		/* Mapped sg entries */
+
+	void *adma_table;	/* ADMA descriptor table */
+	void *align_buffer;	/* Bounce buffer */
+
+	size_t adma_table_sz;	/* ADMA descriptor table size */
+	size_t align_buffer_sz;	/* Bounce buffer size */
+
+	dma_addr_t adma_addr;	/* Mapped ADMA descr. table */
+	dma_addr_t align_addr;	/* Mapped bounce buffer */
+
+	unsigned int desc_sz;	/* ADMA descriptor size */
+	unsigned int align_sz;	/* ADMA alignment */
+	unsigned int align_mask;	/* ADMA alignment mask */
+
+	struct tasklet_struct finish_tasklet;	/* Tasklet structures */
+
+	struct timer_list timer;	/* Timer for timeouts */
+
+	u32 caps;		/* Alternative CAPABILITY_0 */
+	u32 caps1;		/* Alternative CAPABILITY_1 */
+
+	unsigned int            ocr_avail_sdio;	/* OCR bit masks */
+	unsigned int            ocr_avail_sd;
+	unsigned int            ocr_avail_mmc;
+	u32 ocr_mask;		/* available voltages */
+
+	unsigned		timing;		/* Current timing */
+
+	u32			thread_isr;
+
+	/* cached registers */
+	u32			ier;
+
+	wait_queue_head_t	buf_ready_int;	/* Waitqueue for Buffer Read Ready interrupt */
+	unsigned int		tuning_done;	/* Condition flag set when CMD19 succeeds */
+
+	unsigned int		tuning_count;	/* Timer count for re-tuning */
+	unsigned int		tuning_mode;	/* Re-tuning mode supported by host */
+#define SDHCI_TUNING_MODE_1	0
+	struct timer_list	tuning_timer;	/* Timer for tuning */
+
+	struct sdhci_host_next	next_data;
+	unsigned long private[0] ____cacheline_aligned;
+};
+
 struct sdhci_ops {
 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
 	u32		(*read_l)(struct sdhci_host *host, int reg);
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 7d9d6a321521..072f67066df3 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -875,6 +875,7 @@ static void sh_mmcif_start_cmd(struct sh_mmcif_host *host,
 	struct mmc_command *cmd = mrq->cmd;
 	u32 opc = cmd->opcode;
 	u32 mask;
+	unsigned long flags;
 
 	switch (opc) {
 	/* response busy check */
@@ -909,10 +910,12 @@ static void sh_mmcif_start_cmd(struct sh_mmcif_host *host,
 	/* set arg */
 	sh_mmcif_writel(host->addr, MMCIF_CE_ARG, cmd->arg);
 	/* set cmd */
+	spin_lock_irqsave(&host->lock, flags);
 	sh_mmcif_writel(host->addr, MMCIF_CE_CMD_SET, opc);
 
 	host->wait_for = MMCIF_WAIT_FOR_CMD;
 	schedule_delayed_work(&host->timeout_work, host->timeout);
+	spin_unlock_irqrestore(&host->lock, flags);
 }
 
 static void sh_mmcif_stop_cmd(struct sh_mmcif_host *host,
@@ -1171,6 +1174,12 @@ static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id)
 	struct sh_mmcif_host *host = dev_id;
 	struct mmc_request *mrq;
 	bool wait = false;
+	unsigned long flags;
+	int wait_work;
+
+	spin_lock_irqsave(&host->lock, flags);
+	wait_work = host->wait_for;
+	spin_unlock_irqrestore(&host->lock, flags);
 
 	cancel_delayed_work_sync(&host->timeout_work);
 
@@ -1188,7 +1197,7 @@ static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id)
 	 * All handlers return true, if processing continues, and false, if the
 	 * request has to be completed - successfully or not
 	 */
-	switch (host->wait_for) {
+	switch (wait_work) {
 	case MMCIF_WAIT_FOR_REQUEST:
 		/* We're too late, the timeout has already kicked in */
 		mutex_unlock(&host->thread_lock);
@@ -1312,15 +1321,15 @@ static void mmcif_timeout_work(struct work_struct *work)
 		/* Don't run after mmc_remove_host() */
 		return;
 
-	dev_err(&host->pd->dev, "Timeout waiting for %u on CMD%u\n",
-		host->wait_for, mrq->cmd->opcode);
-
 	spin_lock_irqsave(&host->lock, flags);
 	if (host->state == STATE_IDLE) {
 		spin_unlock_irqrestore(&host->lock, flags);
 		return;
 	}
 
+	dev_err(&host->pd->dev, "Timeout waiting for %u on CMD%u\n",
+		host->wait_for, mrq->cmd->opcode);
+
 	host->state = STATE_TIMEOUT;
 	spin_unlock_irqrestore(&host->lock, flags);
 
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index e8a4218b5726..4d3e1ffe5508 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -293,7 +293,7 @@ static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host,
 				    struct mmc_data *data)
 {
 	struct sunxi_idma_des *pdes = (struct sunxi_idma_des *)host->sg_cpu;
-	struct sunxi_idma_des *pdes_pa = (struct sunxi_idma_des *)host->sg_dma;
+	dma_addr_t next_desc = host->sg_dma;
 	int i, max_len = (1 << host->idma_des_size_bits);
 
 	for (i = 0; i < data->sg_len; i++) {
@@ -305,8 +305,9 @@ static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host,
 		else
 			pdes[i].buf_size = data->sg[i].length;
 
+		next_desc += sizeof(struct sunxi_idma_des);
 		pdes[i].buf_addr_ptr1 = sg_dma_address(&data->sg[i]);
-		pdes[i].buf_addr_ptr2 = (u32)&pdes_pa[i + 1];
+		pdes[i].buf_addr_ptr2 = (u32)next_desc;
 	}
 
 	pdes[0].config |= SDXC_IDMAC_DES0_FD;
@@ -930,7 +931,9 @@ static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
 		return PTR_ERR(host->clk_sample);
 	}
 
-	host->reset = devm_reset_control_get(&pdev->dev, "ahb");
+	host->reset = devm_reset_control_get_optional(&pdev->dev, "ahb");
+	if (PTR_ERR(host->reset) == -EPROBE_DEFER)
+		return PTR_ERR(host->reset);
 
 	ret = clk_prepare_enable(host->clk_ahb);
 	if (ret) {
@@ -1028,7 +1031,7 @@ static int sunxi_mmc_probe(struct platform_device *pdev)
 	mmc->f_min		=   400000;
 	mmc->f_max		= 50000000;
 	mmc->caps	       |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
-				  MMC_CAP_ERASE;
+				  MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ;
 
 	ret = mmc_of_parse(mmc);
 	if (ret)
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index a31c3573d386..dba7e1c19dd7 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -1073,8 +1073,6 @@ EXPORT_SYMBOL(tmio_mmc_host_alloc);
 void tmio_mmc_host_free(struct tmio_mmc_host *host)
 {
 	mmc_free_host(host->mmc);
-
-	host->mmc = NULL;
 }
 EXPORT_SYMBOL(tmio_mmc_host_free);
 
diff --git a/drivers/mmc/host/wmt-sdmmc.c b/drivers/mmc/host/wmt-sdmmc.c
index dd2e1aa95ba3..5af00559e9d6 100644
--- a/drivers/mmc/host/wmt-sdmmc.c
+++ b/drivers/mmc/host/wmt-sdmmc.c
@@ -744,7 +744,7 @@ static struct wmt_mci_caps wm8505_caps = {
 	.max_blk_size = 2048,
 };
 
-static struct of_device_id wmt_mci_dt_ids[] = {
+static const struct of_device_id wmt_mci_dt_ids[] = {
 	{ .compatible = "wm,wm8505-sdhc", .data = &wm8505_caps },
 	{ /* Sentinel */ },
 };
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 160448f920ac..de722d4e9d61 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -79,7 +79,7 @@ struct mmc_command {
 #define mmc_cmd_type(cmd)	((cmd)->flags & MMC_CMD_MASK)
 
 	unsigned int		retries;	/* max number of retries */
-	unsigned int		error;		/* command error */
+	int			error;		/* command error */
 
 /*
  * Standard errno values are used for errors, but some have specific
@@ -108,7 +108,7 @@ struct mmc_data {
 	unsigned int		timeout_clks;	/* data timeout (in clocks) */
 	unsigned int		blksz;		/* data block size */
 	unsigned int		blocks;		/* number of blocks */
-	unsigned int		error;		/* data error */
+	int			error;		/* data error */
 	unsigned int		flags;
 
 #define MMC_DATA_WRITE	(1 << 8)
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 471fb3116dbe..12111993a317 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -44,6 +44,7 @@ struct mmc_data;
  * struct dw_mci - MMC controller state shared between all slots
  * @lock: Spinlock protecting the queue and associated data.
  * @regs: Pointer to MMIO registers.
+ * @fifo_reg: Pointer to MMIO registers for data FIFO
  * @sg: Scatterlist entry currently being processed by PIO code, if any.
  * @sg_miter: PIO mapping scatterlist iterator.
  * @cur_slot: The slot which is currently using the controller.
@@ -79,7 +80,6 @@ struct mmc_data;
  * @current_speed: Configured rate of the controller.
  * @num_slots: Number of slots available.
  * @verid: Denote Version ID.
- * @data_offset: Set the offset of DATA register according to VERID.
  * @dev: Device associated with the MMC controller.
  * @pdata: Platform data associated with the MMC controller.
  * @drv_data: Driver specific data for identified variant of the controller
@@ -132,6 +132,7 @@ struct dw_mci {
 	spinlock_t		lock;
 	spinlock_t		irq_lock;
 	void __iomem		*regs;
+	void __iomem		*fifo_reg;
 
 	struct scatterlist	*sg;
 	struct sg_mapping_iter	sg_miter;
@@ -172,7 +173,6 @@ struct dw_mci {
 	u32			num_slots;
 	u32			fifoth_val;
 	u16			verid;
-	u16			data_offset;
 	struct device		*dev;
 	struct dw_mci_board	*pdata;
 	const struct dw_mci_drv_data	*drv_data;
@@ -202,6 +202,8 @@ struct dw_mci {
 	int			irq;
 
 	int			sdio_id0;
+
+	struct timer_list       cmd11_timer;
 };
 
 /* DMA ops for Internal/External DMAC interface */
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 0c8cbe5d1550..b5bedaec6223 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -80,12 +80,6 @@ struct mmc_ios {
 
 struct mmc_host_ops {
 	/*
-	 * 'enable' is called when the host is claimed and 'disable' is called
-	 * when the host is released. 'enable' and 'disable' are deprecated.
-	 */
-	int (*enable)(struct mmc_host *host);
-	int (*disable)(struct mmc_host *host);
-	/*
 	 * It is optional for the host to implement pre_req and post_req in
 	 * order to support double buffering of requests (prepare one
 	 * request while another request is active).
diff --git a/include/linux/mmc/sdhci-spear.h b/include/linux/mmc/sdhci-spear.h
deleted file mode 100644
index 8cc095a76cf8..000000000000
--- a/include/linux/mmc/sdhci-spear.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * include/linux/mmc/sdhci-spear.h
- *
- * SDHCI declarations specific to ST SPEAr platform
- *
- * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef LINUX_MMC_SDHCI_SPEAR_H
-#define LINUX_MMC_SDHCI_SPEAR_H
-
-#include <linux/platform_device.h>
-/*
- * struct sdhci_plat_data: spear sdhci platform data structure
- *
- * card_int_gpio: gpio pin used for card detection
- */
-struct sdhci_plat_data {
-	int card_int_gpio;
-};
-
-/* This function is used to set platform_data field of pdev->dev */
-static inline void
-sdhci_set_plat_data(struct platform_device *pdev, struct sdhci_plat_data *data)
-{
-	pdev->dev.platform_data = data;
-}
-
-#endif /* LINUX_MMC_SDHCI_SPEAR_H */
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
deleted file mode 100644
index c3e3db196738..000000000000
--- a/include/linux/mmc/sdhci.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- *  linux/include/linux/mmc/sdhci.h - Secure Digital Host Controller Interface
- *
- *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-#ifndef LINUX_MMC_SDHCI_H
-#define LINUX_MMC_SDHCI_H
-
-#include <linux/scatterlist.h>
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-
-struct sdhci_host_next {
-	unsigned int	sg_count;
-	s32		cookie;
-};
-
-struct sdhci_host {
-	/* Data set by hardware interface driver */
-	const char *hw_name;	/* Hardware bus name */
-
-	unsigned int quirks;	/* Deviations from spec. */
-
-/* Controller doesn't honor resets unless we touch the clock register */
-#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
-/* Controller has bad caps bits, but really supports DMA */
-#define SDHCI_QUIRK_FORCE_DMA				(1<<1)
-/* Controller doesn't like to be reset when there is no card inserted. */
-#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
-/* Controller doesn't like clearing the power reg before a change */
-#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
-/* Controller has flaky internal state so reset it on each ios change */
-#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1<<4)
-/* Controller has an unusable DMA engine */
-#define SDHCI_QUIRK_BROKEN_DMA				(1<<5)
-/* Controller has an unusable ADMA engine */
-#define SDHCI_QUIRK_BROKEN_ADMA				(1<<6)
-/* Controller can only DMA from 32-bit aligned addresses */
-#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1<<7)
-/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
-#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<8)
-/* Controller can only ADMA chunks that are a multiple of 32 bits */
-#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1<<9)
-/* Controller needs to be reset after each request to stay stable */
-#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<10)
-/* Controller needs voltage and power writes to happen separately */
-#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
-/* Controller provides an incorrect timeout value for transfers */
-#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
-/* Controller has an issue with buffer bits for small transfers */
-#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
-/* Controller does not provide transfer-complete interrupt when not busy */
-#define SDHCI_QUIRK_NO_BUSY_IRQ				(1<<14)
-/* Controller has unreliable card detection */
-#define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1<<15)
-/* Controller reports inverted write-protect state */
-#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1<<16)
-/* Controller does not like fast PIO transfers */
-#define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1<<18)
-/* Controller has to be forced to use block size of 2048 bytes */
-#define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
-/* Controller cannot do multi-block transfers */
-#define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
-/* Controller can only handle 1-bit data transfers */
-#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
-/* Controller needs 10ms delay between applying power and clock */
-#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
-/* Controller uses SDCLK instead of TMCLK for data timeouts */
-#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1<<24)
-/* Controller reports wrong base clock capability */
-#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1<<25)
-/* Controller cannot support End Attribute in NOP ADMA descriptor */
-#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<26)
-/* Controller is missing device caps. Use caps provided by host */
-#define SDHCI_QUIRK_MISSING_CAPS			(1<<27)
-/* Controller uses Auto CMD12 command to stop the transfer */
-#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1<<28)
-/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
-#define SDHCI_QUIRK_NO_HISPD_BIT			(1<<29)
-/* Controller treats ADMA descriptors with length 0000h incorrectly */
-#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC		(1<<30)
-/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
-#define SDHCI_QUIRK_UNSTABLE_RO_DETECT			(1<<31)
-
-	unsigned int quirks2;	/* More deviations from spec. */
-
-#define SDHCI_QUIRK2_HOST_OFF_CARD_ON			(1<<0)
-#define SDHCI_QUIRK2_HOST_NO_CMD23			(1<<1)
-/* The system physically doesn't support 1.8v, even if the host does */
-#define SDHCI_QUIRK2_NO_1_8_V				(1<<2)
-#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN		(1<<3)
-#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON		(1<<4)
-/* Controller has a non-standard host control register */
-#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL		(1<<5)
-/* Controller does not support HS200 */
-#define SDHCI_QUIRK2_BROKEN_HS200			(1<<6)
-/* Controller does not support DDR50 */
-#define SDHCI_QUIRK2_BROKEN_DDR50			(1<<7)
-/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
-#define SDHCI_QUIRK2_STOP_WITH_TC			(1<<8)
-/* Controller does not support 64-bit DMA */
-#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA			(1<<9)
-/* need clear transfer mode register before send cmd */
-#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD	(1<<10)
-/* Capability register bit-63 indicates HS400 support */
-#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400		(1<<11)
-/* forced tuned clock */
-#define SDHCI_QUIRK2_TUNING_WORK_AROUND			(1<<12)
-/* disable the block count for single block transactions */
-#define SDHCI_QUIRK2_SUPPORT_SINGLE			(1<<13)
-
-	int irq;		/* Device IRQ */
-	void __iomem *ioaddr;	/* Mapped address */
-
-	const struct sdhci_ops *ops;	/* Low level hw interface */
-
-	/* Internal data */
-	struct mmc_host *mmc;	/* MMC structure */
-	u64 dma_mask;		/* custom DMA mask */
-
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
-	struct led_classdev led;	/* LED control */
-	char led_name[32];
-#endif
-
-	spinlock_t lock;	/* Mutex */
-
-	int flags;		/* Host attributes */
-#define SDHCI_USE_SDMA		(1<<0)	/* Host is SDMA capable */
-#define SDHCI_USE_ADMA		(1<<1)	/* Host is ADMA capable */
-#define SDHCI_REQ_USE_DMA	(1<<2)	/* Use DMA for this req. */
-#define SDHCI_DEVICE_DEAD	(1<<3)	/* Device unresponsive */
-#define SDHCI_SDR50_NEEDS_TUNING (1<<4)	/* SDR50 needs tuning */
-#define SDHCI_NEEDS_RETUNING	(1<<5)	/* Host needs retuning */
-#define SDHCI_AUTO_CMD12	(1<<6)	/* Auto CMD12 support */
-#define SDHCI_AUTO_CMD23	(1<<7)	/* Auto CMD23 support */
-#define SDHCI_PV_ENABLED	(1<<8)	/* Preset value enabled */
-#define SDHCI_SDIO_IRQ_ENABLED	(1<<9)	/* SDIO irq enabled */
-#define SDHCI_SDR104_NEEDS_TUNING (1<<10)	/* SDR104/HS200 needs tuning */
-#define SDHCI_USING_RETUNING_TIMER (1<<11)	/* Host is using a retuning timer for the card */
-#define SDHCI_USE_64_BIT_DMA	(1<<12)	/* Use 64-bit DMA */
-#define SDHCI_HS400_TUNING	(1<<13)	/* Tuning for HS400 */
-
-	unsigned int version;	/* SDHCI spec. version */
-
-	unsigned int max_clk;	/* Max possible freq (MHz) */
-	unsigned int timeout_clk;	/* Timeout freq (KHz) */
-	unsigned int clk_mul;	/* Clock Muliplier value */
-
-	unsigned int clock;	/* Current clock (MHz) */
-	u8 pwr;			/* Current voltage */
-
-	bool runtime_suspended;	/* Host is runtime suspended */
-	bool bus_on;		/* Bus power prevents runtime suspend */
-	bool preset_enabled;	/* Preset is enabled */
-
-	struct mmc_request *mrq;	/* Current request */
-	struct mmc_command *cmd;	/* Current command */
-	struct mmc_data *data;	/* Current data request */
-	unsigned int data_early:1;	/* Data finished before cmd */
-	unsigned int busy_handle:1;	/* Handling the order of Busy-end */
-
-	struct sg_mapping_iter sg_miter;	/* SG state for PIO */
-	unsigned int blocks;	/* remaining PIO blocks */
-
-	int sg_count;		/* Mapped sg entries */
-
-	void *adma_table;	/* ADMA descriptor table */
-	void *align_buffer;	/* Bounce buffer */
-
-	size_t adma_table_sz;	/* ADMA descriptor table size */
-	size_t align_buffer_sz;	/* Bounce buffer size */
-
-	dma_addr_t adma_addr;	/* Mapped ADMA descr. table */
-	dma_addr_t align_addr;	/* Mapped bounce buffer */
-
-	unsigned int desc_sz;	/* ADMA descriptor size */
-	unsigned int align_sz;	/* ADMA alignment */
-	unsigned int align_mask;	/* ADMA alignment mask */
-
-	struct tasklet_struct finish_tasklet;	/* Tasklet structures */
-
-	struct timer_list timer;	/* Timer for timeouts */
-
-	u32 caps;		/* Alternative CAPABILITY_0 */
-	u32 caps1;		/* Alternative CAPABILITY_1 */
-
-	unsigned int            ocr_avail_sdio;	/* OCR bit masks */
-	unsigned int            ocr_avail_sd;
-	unsigned int            ocr_avail_mmc;
-	u32 ocr_mask;		/* available voltages */
-
-	unsigned		timing;		/* Current timing */
-
-	u32			thread_isr;
-
-	/* cached registers */
-	u32			ier;
-
-	wait_queue_head_t	buf_ready_int;	/* Waitqueue for Buffer Read Ready interrupt */
-	unsigned int		tuning_done;	/* Condition flag set when CMD19 succeeds */
-
-	unsigned int		tuning_count;	/* Timer count for re-tuning */
-	unsigned int		tuning_mode;	/* Re-tuning mode supported by host */
-#define SDHCI_TUNING_MODE_1	0
-	struct timer_list	tuning_timer;	/* Timer for tuning */
-
-	struct sdhci_host_next	next_data;
-	unsigned long private[0] ____cacheline_aligned;
-};
-#endif /* LINUX_MMC_SDHCI_H */
diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h
index 67bbcf0785f6..8e981be2e2c2 100644
--- a/include/linux/platform_data/hsmmc-omap.h
+++ b/include/linux/platform_data/hsmmc-omap.h
@@ -55,9 +55,6 @@ struct omap_hsmmc_platform_data {
 	u32 caps;	/* Used for the MMC driver on 2430 and later */
 	u32 pm_caps;	/* PM capabilities of the mmc */
 
-	/* switch pin can be for card detect (default) or card cover */
-	unsigned cover:1;
-
 	/* use the internal clock */
 	unsigned internal_clock:1;
 
@@ -73,7 +70,8 @@ struct omap_hsmmc_platform_data {
 #define HSMMC_HAS_HSPE_SUPPORT	(1 << 2)
 	unsigned features;
 
-	int switch_pin;			/* gpio (card detect) */
+	int gpio_cd;			/* gpio (card detect) */
+	int gpio_cod;			/* gpio (cover detect) */
 	int gpio_wp;			/* gpio (write protect) */
 
 	int (*set_power)(struct device *dev, int power_on, int vdd);
author	Linus Torvalds <torvalds@linux-foundation.org>	2015-04-13 14:53:03 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2015-04-13 14:53:03 -0700
commit	8d9095c667a185c8e2449632343a2b6c65ae58f1 (patch)
tree	738cdc0e1e5c96738c31ea327ac0d741349d3757
parent	1a370f4cd95e056d55ef5bf1a183880e70195e59 (diff)
parent	69f0fb2a592fc9ebc5e3e55178055d1cff31d479 (diff)