diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-02-11 13:03:11 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-02-11 13:03:11 -0800 |
| commit | 73b4f63aebd6d57db4ca1d31fa6f8516651207b0 (patch) | |
| tree | 49adf7fb3b8f45d040f7e633ba34040541279c28 | |
| parent | bfe9183fdcc0575a648d1401facc649888a1f49a (diff) | |
| parent | 52e68924dfa8d9de5d82f6798352eecc5f03a97d (diff) | |
Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6
Pull documentation updates from Jonathan Corbet:
"Highlights this time around include:
- A thrashing of SubmittingPatches to bring it out of the "send
everything to Linus" era of kernel development.
- A new document on completions from Nicholas McGuire
- Lots of typo fixes, formatting improvements, corrections, build
fixes, and more"
* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6: (35 commits)
Documentation: Fix the wrong command `echo -1 > set_ftrace_pid` for cleaning the filter.
can-doc: Fixed a wrong filepath in can.txt
Documentation: Fix trivial typo in comment.
kgdb,docs: Fix typo and minor style issues
Documentation: add description for FTRACE probe status
doc: brief user documentation for completion
Documentation/misc-devices/mei: Fix indentation of embedded code.
Documentation/misc-devices/mei: Fix indentation of enumeration.
Documentation/misc-devices/mei: Fix spacing around parentheses.
Documentation/misc-devices/mei: Fix formatting of headings.
Documentation: devicetree: Fix double words in Doumentation/devicetree
Documentation: mm: Fix typo in vm.txt
lockstat: Add documentation on contention and contenting points
Documentation: fix blackfin gptimers-example build errors
Fixes column alignment in table of contents entry 1.9 in Documentation/filesystems/proc.txt
CodingStyle: enable emacs display of trailing whitespace
DocBook: Do not exceed argument list limit
gpio: board.txt: Fix the gpio name example
Documentation/SubmittingPatches: unify whitespace/tabs for the DCO
MAINTAINERS: Add the docs-next git tree to the maintainer entry
...
35 files changed, 664 insertions, 388 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 1750fcef1ab4..cd077ca0e1b8 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -29,8 +29,6 @@ DMA-ISA-LPC.txt - How to do DMA with ISA (and LPC) devices. DMA-attributes.txt - listing of the various possible attributes a DMA region can have -dmatest.txt - - how to compile, configure and use the dmatest system. DocBook/ - directory with DocBook templates etc. for kernel documentation. EDID/ @@ -163,8 +161,6 @@ digsig.txt -info on the Digital Signature Verification API dma-buf-sharing.txt - the DMA Buffer Sharing API Guide -dmaengine.txt - -the DMA Engine API Guide dontdiff - file containing a list of files that should never be diff'ed. driver-model/ @@ -209,6 +205,8 @@ hid/ - directory with information on human interface devices highuid.txt - notes on the change from 16 bit to 32 bit user/group IDs. +hsi.txt + - HSI subsystem overview. hwspinlock.txt - hardware spinlock provides hardware assistance for synchronization timers/ @@ -277,6 +275,8 @@ kprobes.txt - documents the kernel probes debugging feature. kref.txt - docs on adding reference counters (krefs) to kernel objects. +kselftest.txt + - small unittests for (some) individual codepaths in the kernel. laptops/ - directory with laptop related info and laptop driver documentation. ldm.txt @@ -285,22 +285,22 @@ leds/ - directory with info about LED handling under Linux. local_ops.txt - semantics and behavior of local atomic operations. -lockdep-design.txt - - documentation on the runtime locking correctness validator. locking/ - directory with info about kernel locking primitives -lockstat.txt - - info on collecting statistics on locks (and contention). lockup-watchdogs.txt - info on soft and hard lockup detectors (aka nmi_watchdog). logo.gif - full colour GIF image of Linux logo (penguin - Tux). logo.txt - info on creator of above logo & site to get additional images from. +lzo.txt + - kernel LZO decompressor input formats m68k/ - directory with info about Linux on Motorola 68k architecture. magic-number.txt - list of magic numbers used to mark/protect kernel data structures. +mailbox.txt + - How to write drivers for the common mailbox framework (IPC). md.txt - info on boot arguments for the multiple devices driver. media-framework.txt @@ -327,8 +327,6 @@ mtd/ - directory with info about memory technology devices (flash) mono.txt - how to execute Mono-based .NET binaries with the help of BINFMT_MISC. -mutex-design.txt - - info on the generic mutex subsystem. namespaces/ - directory with various information about namespaces netlabel/ @@ -395,10 +393,6 @@ robust-futexes.txt - a description of what robust futexes are. rpmsg.txt - info on the Remote Processor Messaging (rpmsg) Framework -rt-mutex-design.txt - - description of the RealTime mutex implementation design. -rt-mutex.txt - - desc. of RT-mutex subsystem with PI (Priority Inheritance) support. rtc.txt - notes on how to use the Real Time Clock (aka CMOS clock) driver. s390/ @@ -425,8 +419,6 @@ sparse.txt - info on how to obtain and use the sparse tool for typechecking. spi/ - overview of Linux kernel Serial Peripheral Interface (SPI) support. -spinlocks.txt - - info on using spinlocks to provide exclusive access in kernel. stable_api_nonsense.txt - info on why the kernel does not have a stable in-kernel api or abi. stable_kernel_rules.txt @@ -483,10 +475,10 @@ wimax/ - directory with info about Intel Wireless Wimax Connections workqueue.txt - information on the Concurrency Managed Workqueue implementation -ww-mutex-design.txt - - Intro to Mutex wait/would deadlock handling.s x86/x86_64/ - directory with info on Linux support for AMD x86-64 (Hammer) machines. +xillybus.txt + - Overview and basic ui of xillybus driver xtensa/ - directory with documents relating to arch/xtensa port/implementation xz.txt diff --git a/Documentation/Changes b/Documentation/Changes index 74bdda9272a4..646cdaa6e9d1 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -21,8 +21,8 @@ running a Linux kernel. Also, not all tools are necessary on all systems; obviously, if you don't have any ISDN hardware, for example, you probably needn't concern yourself with isdn4k-utils. -o Gnu C 3.2 # gcc --version -o Gnu make 3.80 # make --version +o GNU C 3.2 # gcc --version +o GNU make 3.80 # make --version o binutils 2.12 # ld -v o util-linux 2.10o # fdformat --version o module-init-tools 0.9.10 # depmod -V @@ -57,7 +57,7 @@ computer. Make ---- -You will need Gnu make 3.80 or later to build the kernel. +You will need GNU make 3.80 or later to build the kernel. Binutils -------- diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index 618a33c940df..449a8a19fc21 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -527,6 +527,7 @@ values. To do the latter, you can stick the following in your .emacs file: (string-match (expand-file-name "~/src/linux-trees") filename)) (setq indent-tabs-mode t) + (setq show-trailing-whitespace t) (c-set-style "linux-tabs-only"))))) This will make emacs go better with the kernel coding style for C diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 9c7d92d03f62..b6a6a2e0dd3b 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -56,7 +56,7 @@ htmldocs: $(HTML) MAN := $(patsubst %.xml, %.9, $(BOOKS)) mandocs: $(MAN) - $(if $(wildcard $(obj)/man/*.9),gzip -f $(obj)/man/*.9) + find $(obj)/man -name '*.9' | xargs gzip -f installmandocs: mandocs mkdir -p /usr/local/man/man9/ diff --git a/Documentation/DocBook/crypto-API.tmpl b/Documentation/DocBook/crypto-API.tmpl index c763d30f4893..04a8c24ead47 100644 --- a/Documentation/DocBook/crypto-API.tmpl +++ b/Documentation/DocBook/crypto-API.tmpl @@ -111,7 +111,7 @@ <para> This specification is intended for consumers of the kernel crypto API as well as for developers implementing ciphers. This API - specification, however, does not discusses all API calls available + specification, however, does not discuss all API calls available to data transformation implementations (i.e. implementations of ciphers and other transformations (such as CRC or even compression algorithms) that can register with the kernel crypto API). diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index f77358f96930..2428cc04dbc8 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -75,7 +75,7 @@ a development machine and the other is the target machine. The kernel to be debugged runs on the target machine. The development machine runs an instance of gdb against the vmlinux file which - contains the symbols (not boot image such as bzImage, zImage, + contains the symbols (not a boot image such as bzImage, zImage, uImage...). In gdb the developer specifies the connection parameters and connects to kgdb. The type of connection a developer makes with gdb depends on the availability of kgdb I/O @@ -95,7 +95,7 @@ <title>Kernel config options for kgdb</title> <para> To enable <symbol>CONFIG_KGDB</symbol> you should look under - "Kernel debugging" and select "KGDB: kernel debugger". + "Kernel hacking" / "Kernel debugging" and select "KGDB: kernel debugger". </para> <para> While it is not a hard requirement that you have symbols in your @@ -105,7 +105,7 @@ kernel with debug info" in the config menu. </para> <para> - It is advised, but not required that you turn on the + It is advised, but not required, that you turn on the <symbol>CONFIG_FRAME_POINTER</symbol> kernel option which is called "Compile the kernel with frame pointers" in the config menu. This option inserts code to into the compiled executable which saves the frame @@ -181,7 +181,7 @@ <para>This section describes the various runtime kernel parameters that affect the configuration of the kernel debugger. The following chapter covers using kdb and kgdb as well as - provides some examples of the configuration parameters.</para> + providing some examples of the configuration parameters.</para> <sect1 id="kgdboc"> <title>Kernel parameter: kgdboc</title> <para>The kgdboc driver was originally an abbreviation meant to @@ -219,8 +219,8 @@ <listitem><para>kbd = Keyboard</para></listitem> </itemizedlist> </para> - <para>You can configure kgdboc to use the keyboard, and or a serial - device depending on if you are using kdb and or kgdb, in one of the + <para>You can configure kgdboc to use the keyboard, and/or a serial + device depending on if you are using kdb and/or kgdb, in one of the following scenarios. The order listed above must be observed if you use any of the optional configurations together. Using kms + only gdb is generally not a useful combination.</para> @@ -261,11 +261,8 @@ </sect3> <sect3 id="kgdbocArgs3"> <title>More examples</title> - <para>You can configure kgdboc to use the keyboard, and or a serial - device depending on if you are using kdb and or kgdb, in one of the - following scenarios.</para> - <para>You can configure kgdboc to use the keyboard, and or a serial device - depending on if you are using kdb and or kgdb, in one of the + <para>You can configure kgdboc to use the keyboard, and/or a serial device + depending on if you are using kdb and/or kgdb, in one of the following scenarios. <orderedlist> <listitem><para>kdb and kgdb over only a serial port</para> @@ -315,7 +312,7 @@ <para> The Kernel command line option <constant>kgdbwait</constant> makes kgdb wait for a debugger connection during booting of a kernel. You - can only use this option you compiled a kgdb I/O driver into the + can only use this option if you compiled a kgdb I/O driver into the kernel and you specified the I/O driver configuration as a kernel command line option. The kgdbwait parameter should always follow the configuration parameter for the kgdb I/O driver in the kernel @@ -354,7 +351,7 @@ </listitem> </orderedlist> <para>IMPORTANT NOTE: You cannot use kgdboc + kgdbcon on a tty that is an - active system console. An example incorrect usage is <constant>console=ttyS0,115200 kgdboc=ttyS0 kgdbcon</constant> + active system console. An example of incorrect usage is <constant>console=ttyS0,115200 kgdboc=ttyS0 kgdbcon</constant> </para> <para>It is possible to use this option with kgdboc on a tty that is not a system console. </para> @@ -386,12 +383,12 @@ <title>Quick start for kdb on a serial port</title> <para>This is a quick example of how to use kdb.</para> <para><orderedlist> - <listitem><para>Boot kernel with arguments: + <listitem><para>Configure kgdboc at boot using kernel parameters: <itemizedlist> <listitem><para><constant>console=ttyS0,115200 kgdboc=ttyS0,115200</constant></para></listitem> </itemizedlist></para> <para>OR</para> - <para>Configure kgdboc after the kernel booted; assuming you are using a serial port console: + <para>Configure kgdboc after the kernel has booted; assuming you are using a serial port console: <itemizedlist> <listitem><para><constant>echo ttyS0 > /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem> </itemizedlist> @@ -442,12 +439,12 @@ <title>Quick start for kdb using a keyboard connected console</title> <para>This is a quick example of how to use kdb with a keyboard.</para> <para><orderedlist> - <listitem><para>Boot kernel with arguments: + <listitem><para>Configure kgdboc at boot using kernel parameters: <itemizedlist> <listitem><para><constant>kgdboc=kbd</constant></para></listitem> </itemizedlist></para> <para>OR</para> - <para>Configure kgdboc after the kernel booted: + <para>Configure kgdboc after the kernel has booted: <itemizedlist> <listitem><para><constant>echo kbd > /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem> </itemizedlist> @@ -501,12 +498,12 @@ <title>Connecting with gdb to a serial port</title> <orderedlist> <listitem><para>Configure kgdboc</para> - <para>Boot kernel with arguments: + <para>Configure kgdboc at boot using kernel parameters: <itemizedlist> <listitem><para><constant>kgdboc=ttyS0,115200</constant></para></listitem> </itemizedlist></para> <para>OR</para> - <para>Configure kgdboc after the kernel booted: + <para>Configure kgdboc after the kernel has booted: <itemizedlist> <listitem><para><constant>echo ttyS0 > /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem> </itemizedlist></para> @@ -536,7 +533,7 @@ </para> </listitem> <listitem> - <para>Connect from from gdb</para> + <para>Connect from gdb</para> <para> Example (using a directly connected port): </para> @@ -584,7 +581,7 @@ <para> There are two ways to switch from kgdb to kdb: you can use gdb to issue a maintenance packet, or you can blindly type the command $3#33. - Whenever kernel debugger stops in kgdb mode it will print the + Whenever the kernel debugger stops in kgdb mode it will print the message <constant>KGDB or $3#33 for KDB</constant>. It is important to note that you have to type the sequence correctly in one pass. You cannot type a backspace or delete because kgdb will interpret @@ -704,7 +701,7 @@ Task Addr Pid Parent [*] cpu State Thread Command <listitem><para>Registration and unregistration of architecture specific trap hooks</para></listitem> <listitem><para>Any special exception handling and cleanup</para></listitem> <listitem><para>NMI exception handling and cleanup</para></listitem> - <listitem><para>(optional)HW breakpoints</para></listitem> + <listitem><para>(optional) HW breakpoints</para></listitem> </itemizedlist> </para> </listitem> @@ -760,7 +757,7 @@ Task Addr Pid Parent [*] cpu State Thread Command a kgdb I/O driver for characters when it needs input. The I/O driver is expected to return immediately if there is no data available. Doing so allows for the future possibility to touch - watch dog hardware in such a way as to have a target system not + watchdog hardware in such a way as to have a target system not reset when these are enabled. </para> </listitem> @@ -779,21 +776,25 @@ Task Addr Pid Parent [*] cpu State Thread Command their <asm/kgdb.h> file. These are: <itemizedlist> <listitem> - <para> - NUMREGBYTES: The size in bytes of all of the registers, so - that we can ensure they will all fit into a packet. - </para> - <para> - BUFMAX: The size in bytes of the buffer GDB will read into. - This must be larger than NUMREGBYTES. - </para> - <para> - CACHE_FLUSH_IS_SAFE: Set to 1 if it is always safe to call - flush_cache_range or flush_icache_range. On some architectures, - these functions may not be safe to call on SMP since we keep other - CPUs in a holding pattern. - </para> - </listitem> + <para> + NUMREGBYTES: The size in bytes of all of the registers, so + that we can ensure they will all fit into a packet. + </para> + </listitem> + <listitem> + <para> + BUFMAX: The size in bytes of the buffer GDB will read into. + This must be larger than NUMREGBYTES. + </para> + </listitem> + <listitem> + <para> + CACHE_FLUSH_IS_SAFE: Set to 1 if it is always safe to call + flush_cache_range or flush_icache_range. On some architectures, + these functions may not be safe to call on SMP since we keep other + CPUs in a holding pattern. + </para> + </listitem> </itemizedlist> </para> <para> @@ -812,8 +813,8 @@ Task Addr Pid Parent [*] cpu State Thread Command <para> The kgdboc driver is actually a very thin driver that relies on the underlying low level to the hardware driver having "polling hooks" - which the to which the tty driver is attached. In the initial - implementation of kgdboc it the serial_core was changed to expose a + to which the tty driver is attached. In the initial + implementation of kgdboc the serial_core was changed to expose a low level UART hook for doing polled mode reading and writing of a single character while in an atomic context. When kgdb makes an I/O request to the debugger, kgdboc invokes a callback in the serial diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 1fa1caa198eb..447671bd2927 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -10,27 +10,49 @@ kernel, the process can sometimes be daunting if you're not familiar with "the system." This text is a collection of suggestions which can greatly increase the chances of your change being accepted. -Read Documentation/SubmitChecklist for a list of items to check -before submitting code. If you are submitting a driver, also read -Documentation/SubmittingDrivers. +This document contains a large number of suggestions in a relatively terse +format. For detailed information on how the kernel development process +works, see Documentation/development-process. Also, read +Documentation/SubmitChecklist for a list of items to check before +submitting code. If you are submitting a driver, also read +Documentation/SubmittingDrivers; for device tree binding patches, read +Documentation/devicetree/bindings/submitting-patches.txt. Many of these steps describe the default behavior of the git version control system; if you use git to prepare your patches, you'll find much of the mechanical work done for you, though you'll still need to prepare -and document a sensible set of patches. +and document a sensible set of patches. In general, use of git will make +your life as a kernel developer easier. -------------------------------------------- SECTION 1 - CREATING AND SENDING YOUR CHANGE -------------------------------------------- +0) Obtain a current source tree +------------------------------- + +If you do not have a repository with the current kernel source handy, use +git to obtain one. You'll want to start with the mainline repository, +which can be grabbed with: + + git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git + +Note, however, that you may not want to develop against the mainline tree +directly. Most subsystem maintainers run their own trees and want to see +patches prepared against those trees. See the "T:" entry for the subsystem +in the MAINTAINERS file to find that tree, or simply ask the maintainer if +the tree is not listed there. + +It is still possible to download kernel releases via tarballs (as described +in the next section), but that is the hard way to do kernel development. 1) "diff -up" ------------ -Use "diff -up" or "diff -uprN" to create patches. git generates patches -in this form by default; if you're using git, you can skip this section -entirely. +If you must generate your patches by hand, use "diff -up" or "diff -uprN" +to create patches. Git generates patches in this form by default; if +you're using git, you can skip this section entirely. All changes to the Linux kernel occur in the form of patches, as generated by diff(1). When creating your patch, make sure to create it @@ -42,7 +64,7 @@ not in any lower subdirectory. To create a patch for a single file, it is often sufficient to do: - SRCTREE= linux-2.6 + SRCTREE= linux MYFILE= drivers/net/mydriver.c cd $SRCTREE @@ -55,17 +77,16 @@ To create a patch for multiple files, you should unpack a "vanilla", or unmodified kernel source tree, and generate a diff against your own source tree. For example: - MYSRC= /devel/linux-2.6 + MYSRC= /devel/linux - tar xvfz linux-2.6.12.tar.gz - mv linux-2.6.12 linux-2.6.12-vanilla - diff -uprN -X linux-2.6.12-vanilla/Documentation/dontdiff \ - linux-2.6.12-vanilla $MYSRC > /tmp/patch + tar xvfz linux-3.19.tar.gz + mv linux-3.19 linux-3.19-vanilla + diff -uprN -X linux-3.19-vanilla/Documentation/dontdiff \ + linux-3.19-vanilla $MYSRC > /tmp/patch "dontdiff" is a list of files which are generated by the kernel during the build process, and should be ignored in any diff(1)-generated -patch. The "dontdiff" file is included in the kernel tree in -2.6.12 and later. +patch. Make sure your patch does not include any extra files which do not belong in a patch submission. Make sure to review your patch -after- @@ -83,6 +104,7 @@ is another popular alternative. 2) Describe your changes. +------------------------- Describe your problem. Whether your patch is a one-line bug fix or 5000 lines of a new feature, there must be an underlying problem that @@ -124,10 +146,10 @@ See #3, next. When you submit or resubmit a patch or patch series, include the complete patch description and justification for it. Don't just say that this is version N of the patch (series). Don't expect the -patch merger to refer back to earlier patch versions or referenced +subsystem maintainer to refer back to earlier patch versions or referenced URLs to find the patch description and put that into the patch. I.e., the patch (series) and its description should be self-contained. -This benefits both the patch merger(s) and reviewers. Some reviewers +This benefits both the maintainers and reviewers. Some reviewers probably didn't even receive earlier versions of the patch. Describe your changes in imperative mood, e.g. "make xyzzy do frotz" @@ -156,10 +178,15 @@ Example: platform_set_drvdata(), but left the variable "dev" unused, delete it. +You should also be sure to use at least the first twelve characters of the +SHA-1 ID. The kernel repository holds a *lot* of objects, making +collisions with shorter IDs a real possibility. Bear in mind that, even if +there is no collision with your six-character ID now, that condition may +change five years from now. + If your patch fixes a bug in a specific commit, e.g. you found an issue using git-bisect, please use the 'Fixes:' tag with the first 12 characters of the -SHA-1 ID, and the one line summary. -Example: +SHA-1 ID, and the one line summary. For example: Fixes: e21d2170f366 ("video: remove unnecessary platform_set_drvdata()") @@ -172,8 +199,9 @@ outputting the above style in the git log or git show commands fixes = Fixes: %h (\"%s\") 3) Separate your changes. +------------------------- -Separate _logical changes_ into a single patch file. +Separate each _logical change_ into a separate patch. For example, if your changes include both bug fixes and performance enhancements for a single driver, separate those changes into two @@ -184,90 +212,116 @@ On the other hand, if you make a single change to numerous files, group those changes into a single patch. Thus a single logical change is contained within a single patch. +The point to remember is that each patch should make an easily understood +change that can be verified by reviewers. Each patch should be justifiable +on its own merits. + If one patch depends on another patch in order for a change to be complete, that is OK. Simply note "this patch depends on patch X" in your patch description. +When dividing your change into a series of patches, take special care to +ensure that the kernel builds and runs properly after each patch in the +series. Developers using "git bisect" to track down a problem can end up +splitting your patch series at any point; they will not thank you if you +introduce bugs in the middle. + If you cannot condense your patch set into a smaller set of patches, then only post say 15 or so at a time and wait for review and integration. -4) Style check your changes. +4) Style-check your changes. +---------------------------- Check your patch for basic style violations, details of which can be found in Documentation/CodingStyle. Failure to do so simply wastes the reviewers time and will get your patch rejected, probably without even being read. -At a minimum you should check your patches with the patch style -checker prior to submission (scripts/checkpatch.pl). You should -be able to justify all violations that remain in your patch. - - +One significant exception is when moving code from one file to +another -- in this case you should not modify the moved code at all in +the same patch which moves it. This clearly delineates the act of +moving the code and your changes. This greatly aids review of the +actual differences and allows tools to better track the history of +the code itself. -5) Select e-mail destination. +Check your patches with the patch style checker prior to submission +(scripts/checkpatch.pl). Note, though, that the style checker should be +viewed as a guide, not as a replacement for human judgment. If your code +looks better with a violation then its probably best left alone. -Look through the MAINTAINERS file and the source code, and determine -if your change applies to a specific subsystem of the kernel, with -an assigned maintainer. If so, e-mail that person. The script -scripts/get_maintainer.pl can be very useful at this step. +The checker reports at three levels: + - ERROR: things that are very likely to be wrong + - WARNING: things requiring careful review + - CHECK: things requiring thought -If no maintainer is listed, or the maintainer does not respond, send -your patch to the primary Linux kernel developer's mailing list, -linux-kernel@vger.kernel.org. Most kernel developers monitor this -e-mail list, and can comment on your changes. +You should be able to justify all violations that remain in your +patch. -Do not send more than 15 patches at once to the vger mailing lists!!! +5) Select the recipients for your patch. +---------------------------------------- +You should always copy the appropriate subsystem maintainer(s) on any patch +to code that they maintain; look through the MAINTAINERS file and the +source code revision history to see who those maintainers are. The +script scripts/get_maintainer.pl can be very useful at this step. If you +cannot find a maintainer for the subsystem your are working on, Andrew +Morton (akpm@linux-foundation.org) serves as a maintainer of last resort. -Linus Torvalds is the final arbiter of all changes accepted into the -Linux kernel. His e-mail address is <torvalds@linux-foundation.org>. -He gets a lot of e-mail, so typically you should do your best to -avoid- -sending him e-mail. +You should also normally choose at least one mailing list to receive a copy +of your patch set. linux-kernel@vger.kernel.org functions as a list of +last resort, but the volume on that list has caused a number of developers +to tune it out. Look in the MAINTAINERS file for a subsystem-specific +list; your patch will probably get more attention there. Please do not +spam unrelated lists, though. -Patches which are bug fixes, are "obvious" changes, or similarly -require little discussion should be sent or CC'd to Linus. Patches -which require discussion or do not have a clear advantage should -usually be sent first to linux-kernel. Only after the patch is -discussed should the patch then be submitted to Linus. +Many kernel-related lists are hosted on vger.kernel.org; you can find a +list of them at http://vger.kernel.org/vger-lists.html. There are +kernel-related lists hosted elsewhere as well, though. +Do not send more than 15 patches at once to the vger mailing lists!!! +Linus Torvalds is the final arbiter of all changes accepted into the +Linux kernel. His e-mail address is <torvalds@linux-foundation.org>. +He gets a lot of e-mail, and, at this point, very few patches go through +Linus directly, so typically you should do your best to -avoid- +sending him e-mail. -6) Select your CC (e-mail carbon copy) list. +If you have a patch that fixes an exploitable security bug, send that patch +to security@kernel.org. For severe bugs, a short embargo may be considered +to allow distrbutors to get the patch out to users; in such cases, +obviously, the patch should not be sent to any public lists. -Unless you have a reason NOT to do so, CC linux-kernel@vger.kernel.org. +Patches that fix a severe bug in a released kernel should be directed +toward the stable maintainers by putting a line like this: -Other kernel developers besides Linus need to be aware of your change, -so that they may comment on it and offer code review and suggestions. -linux-kernel is the primary Linux kernel developer mailing list. -Other mailing lists are available for specific subsystems, such as -USB, framebuffer devices, the VFS, the SCSI subsystem, etc. See the -MAINTAINERS file for a mailing list that relates specifically to -your change. + Cc: stable@vger.kernel.org -Majordomo lists of VGER.KERNEL.ORG at: - <http://vger.kernel.org/vger-lists.html> +into your patch. -If changes affect userland-kernel interfaces, please send -the MAN-PAGES maintainer (as listed in the MAINTAINERS file) -a man-pages patch, or at least a notification of the change, -so that some information makes its way into the manual pages. +Note, however, that some subsystem maintainers want to come to their own +conclusions on which patches should go to the stable trees. The networking +maintainer, in particular, would rather not see individual developers +adding lines like the above to their patches. -Even if the maintainer did not respond in step #5, make sure to ALWAYS -copy the maintainer when you change their code. +If changes affect userland-kernel interfaces, please send the MAN-PAGES +maintainer (as listed in the MAINTAINERS file) a man-pages patch, or at +least a notification of the change, so that some information makes its way +into the manual pages. User-space API changes should also be copied to +linux-api@vger.kernel.org. For small patches you may want to CC the Trivial Patch Monkey trivial@kernel.org which collects "trivial" patches. Have a look into the MAINTAINERS file for its current manager. Trivial patches must qualify for one of the following rules: Spelling fixes in documentation - Spelling fixes which could break grep(1) + Spelling fixes for errors which could break grep(1) Warning fixes (cluttering with useless warnings is bad) Compilation fixes (only if they are actually correct) Runtime fixes (only if they actually fix things) - Removing use of deprecated functions/macros (eg. check_region) + Removing use of deprecated functions/macros Contact detail and documentation fixes Non-portable code replaced by portable code (even in arch-specific, since people copy, as long as it's trivial) @@ -276,7 +330,8 @@ Trivial patches must qualify for one of the following rules: -7) No MIME, no links, no compression, no attachments. Just plain text. +6) No MIME, no links, no compression, no attachments. Just plain text. +----------------------------------------------------------------------- Linus and other kernel developers need to be able to read and comment on the changes you are submitting. It is important for a kernel @@ -299,54 +354,48 @@ you to re-send them using MIME. See Documentation/email-clients.txt for hints about configuring your e-mail client so that it sends your patches untouched. -8) E-mail size. - -When sending patches to Linus, always follow step #7. +7) E-mail size. +--------------- Large changes are not appropriate for mailing lists, and some maintainers. If your patch, uncompressed, exceeds 300 kB in size, it is preferred that you store your patch on an Internet-accessible -server, and provide instead a URL (link) pointing to your patch. +server, and provide instead a URL (link) pointing to your patch. But note +that if your patch exceeds 300 kB, it almost certainly needs to be broken up +anyway. +8) Respond to review comments. +------------------------------ +Your patch will almost certainly get comments from reviewers on ways in +which the patch can be improved. You must respond to those comments; +ignoring reviewers is a good way to get ignored in return. Review comments +or questions that do not lead to a code change should almost certainly +bring about a comment or changelog entry so that the next reviewer better +understands what is going on. -9) Name your kernel version. +Be sure to tell the reviewers what changes you are making and to thank them +for their time. Code review is a tiring and time-consuming process, and +reviewers sometimes get grumpy. Even in that case, though, respond +politely and address the problems they have pointed out. -It is important to note, either in the subject line or in the patch -description, the kernel version to which this patch applies. -If the patch does not apply cleanly to the latest kernel version, -Linus will not apply it. +9) Don't get discouraged - or impatient. +---------------------------------------- +After you have submitted your change, be patient and wait. Reviewers are +busy people and may not get to your patch right away. +Once upon a time, patches used to disappear into the void without comment, +but the development process works more smoothly than that now. You should +receive comments within a week or so; if that does not happen, make sure +that you have sent your patches to the right place. Wait for a minimum of +one week before resubmitting or pinging reviewers - possibly longer during +busy times like merge windows. -10) Don't get discouraged. Re-submit. -After you have submitted your change, be patient and wait. If Linus -likes your change and applies it, it will appear in the next version -of the kernel that he releases. - -However, if your change doesn't appear in the next version of the -kernel, there could be any number of reasons. It's YOUR job to -narrow down those reasons, correct what was wrong, and submit your -updated change. - -It is quite common for Linus to "drop" your patch without comment. -That's the nature of the system. If he drops your patch, it could be -due to -* Your patch did not apply cleanly to the latest kernel version. -* Your patch was not sufficiently discussed on linux-kernel. -* A style issue (see section 2). -* An e-mail formatting issue (re-read this section). -* A technical problem with your change. -* He gets tons of e-mail, and yours got lost in the shuffle. -* You are being annoying. - -When in doubt, solicit comments on linux-kernel mailing list. - - - -11) Include PATCH in the subject +10) Include PATCH in the subject +-------------------------------- Due to high e-mail traffic to Linus, and to linux-kernel, it is common convention to prefix your subject line with [PATCH]. This lets Linus @@ -355,7 +404,8 @@ e-mail discussions. -12) Sign your work +11) Sign your work +------------------ To improve tracking of who did what, especially with patches that can percolate to their final resting place in the kernel through several @@ -387,11 +437,11 @@ can certify the below: person who certified (a), (b) or (c) and I have not modified it. - (d) I understand and agree that this project and the contribution - are public and that a record of the contribution (including all - personal information I submit with it, including my sign-off) is - maintained indefinitely and may be redistributed consistent with - this project or the open source license(s) involved. + (d) I understand and agree that this project and the contribution + are public and that a record of the contribution (including all + personal information I submit with it, including my sign-off) is + maintained indefinitely and may be redistributed consistent with + this project or the open source license(s) involved. then you just add a line saying @@ -401,7 +451,7 @@ using your real name (sorry, no pseudonyms or anonymous contributions.) Some people also put extra tags at the end. They'll just be ignored for now, but you can do this to mark internal company procedures or just -point out some special detail about the sign-off. +point out some special detail about the sign-off. If you are a subsystem or branch maintainer, sometimes you need to slightly modify patches you receive in order to merge them, because the code is not @@ -429,15 +479,15 @@ which appears in the changelog. Special note to back-porters: It seems to be a common and useful practice to insert an indication of the origin of a patch at the top of the commit message (just after the subject line) to facilitate tracking. For instance, -here's what we see in 2.6-stable : +here's what we see in a 3.x-stable release: - Date: Tue May 13 19:10:30 2008 +0000 +Date: Tue Oct 7 07:26:38 2014 -0400 - SCSI: libiscsi regression in 2.6.25: fix nop timer handling + libata: Un-break ATA blacklist - commit 4cf1043593db6a337f10e006c23c69e5fc93e722 upstream + commit 1c40279960bcd7d52dbdf1d466b20d24b99176c8 upstream. -And here's what appears in 2.4 : +And here's what might appear in an older kernel once a patch is backported: Date: Tue May 13 22:12:27 2008 +0200 @@ -446,18 +496,19 @@ And here's what appears in 2.4 : [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a] Whatever the format, this information provides a valuable help to people -tracking your trees, and to people trying to trouble-shoot bugs in your +tracking your trees, and to people trying to troubleshoot bugs in your tree. -13) When to use Acked-by: and Cc: +12) When to use Acked-by: and Cc: +--------------------------------- The Signed-off-by: tag indicates that the signer was involved in the development of the patch, or that he/she was in the patch's delivery path. If a person was not directly involved in the preparation or handling of a patch but wishes to signify and record their approval of it then they can -arrange to have an Acked-by: line added to the patch's changelog. +ask to have an Acked-by: line added to the patch's changelog. Acked-by: is often used by the maintainer of the affected code when that maintainer neither contributed to nor forwarded the patch. @@ -465,7 +516,8 @@ maintainer neither contributed to nor forwarded the patch. Acked-by: is not as formal as Signed-off-by:. It is a record that the acker has at least reviewed the patch and has indicated acceptance. Hence patch mergers will sometimes manually convert an acker's "yep, looks good to me" -into an Acked-by:. +into an Acked-by: (but note that it is usually better to ask for an +explicit ack). Acked-by: does not necessarily indicate acknowledgement of the entire patch. For example, if a patch affects multiple subsystems and has an Acked-by: from @@ -477,11 +529,13 @@ list archives. If a person has had the opportunity to comment on a patch, but has not provided such comments, you may optionally add a "Cc:" tag to the patch. This is the only tag which might be added without an explicit action by the -person it names. This tag documents that potentially interested parties -have been included in the discussion +person it names - but it should indicate that this person was copied on the +patch. This tag documents that potentially interested parties +have been included in the discussion. -14) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes: +13) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes: +-------------------------------------------------------------------------- The Reported-by tag gives credit to people who find bugs and report them and it hopefully inspires them to help us again in the future. Please note that if @@ -541,7 +595,13 @@ which stable kernel versions should receive your fix. This is the preferred method for indicating a bug fixed by the patch. See #2 above for more details. -15) The canonical patch format +14) The canonical patch format +------------------------------ + +This section describes how the patch itself should be formatted. Note +that, if you have your patches stored in a git repository, proper patch +formatting can be had with "git format-patch". The tools cannot create +the necessary text, though, so read the instructions below anyway. The canonical patch subject line is: @@ -549,7 +609,8 @@ The canonical patch subject line is: The canonical patch message body contains the following: - - A "from" line specifying the patch author. + - A "from" line specifying the patch author (only needed if the person + sending the patch is not the author). - An empty line. @@ -656,128 +717,63 @@ See more details on the proper patch format in the following references. -16) Sending "git pull" requests (from Linus emails) - -Please write the git repo address and branch name alone on the same line -so that I can't even by mistake pull from the wrong branch, and so -that a triple-click just selects the whole thing. - -So the proper format is something along the lines of: - - "Please pull from - - git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus - - to get these changes:" - -so that I don't have to hunt-and-peck for the address and inevitably -get it wrong (actually, I've only gotten it wrong a few times, and -checking against the diffstat tells me when I get it wrong, but I'm -just a lot more comfortable when I don't have to "look for" the right -thing to pull, and double-check that I have the right branch-name). - - -Please use "git diff -M --stat --summary" to generate the diffstat: -the -M enables rename detection, and the summary enables a summary of -new/deleted or renamed files. - -With rename detection, the statistics are rather different [...] -because git will notice that a fair number of the changes are renames. - ------------------------------------ -SECTION 2 - HINTS, TIPS, AND TRICKS ------------------------------------ - -This section lists many of the common "rules" associated with code -submitted to the kernel. There are always exceptions... but you must -have a really good reason for doing so. You could probably call this -section Linus Computer Science 101. - - - -1) Read Documentation/CodingStyle - -Nuff said. If your code deviates too much from this, it is likely -to be rejected without further review, and without comment. - -One significant exception is when moving code from one file to -another -- in this case you should not modify the moved code at all in -the same patch which moves it. This clearly delineates the act of -moving the code and your changes. This greatly aids review of the -actual differences and allows tools to better track the history of -the code itself. - -Check your patches with the patch style checker prior to submission -(scripts/checkpatch.pl). The style checker should be viewed as -a guide not as the final word. If your code looks better with -a violation then its probably best left alone. - -The checker reports at three levels: - - ERROR: things that are very likely to be wrong - - WARNING: things requiring careful review - - CHECK: things requiring thought - -You should be able to justify all violations that remain in your -patch. - - - -2) #ifdefs are ugly - -Code cluttered with ifdefs is difficult to read and maintain. Don't do -it. Instead, put your ifdefs in a header, and conditionally define -'static inline' functions, or macros, which are used in the code. -Let the compiler optimize away the "no-op" case. - -Simple example, of poor code: - - dev = alloc_etherdev (sizeof(struct funky_private)); - if (!dev) - return -ENODEV; - #ifdef CONFIG_NET_FUNKINESS - init_funky_net(dev); - #endif - -Cleaned-up example: - -(in header) - #ifndef CONFIG_NET_FUNKINESS - static inline void init_funky_net (struct net_device *d) {} - #endif +15) Sending "git pull" requests +------------------------------- -(in the code itself) - dev = alloc_etherdev (sizeof(struct funky_private)); - if (!dev) - return -ENODEV; - init_funky_net(dev); +If you have a series of patches, it may be most convenient to have the +maintainer pull them directly into the subsystem repository with a +"git pull" operation. Note, however, that pulling patches from a developer +requires a higher degree of trust than taking patches from a mailing list. +As a result, many subsystem maintainers are reluctant to take pull +requests, especially from new, unknown developers. If in doubt you can use +the pull request as the cover letter for a normal posting of the patch +series, giving the maintainer the option of using either. +A pull request should have [GIT] or [PULL] in the subject line. The +request itself should include the repository name and the branch of +interest on a single line; it should look something like: + Please pull from -3) 'static inline' is better than a macro + git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus -Static inline functions are greatly preferred over macros. -They provide type safety, have no length limitations, no formatting -limitations, and under gcc they are as cheap as macros. + to get these changes:" -Macros should only be used for cases where a static inline is clearly -suboptimal [there are a few, isolated cases of this in fast paths], -or where it is impossible to use a static inline function [such as -string-izing]. +A pull request should also include an overall message saying what will be +included in the request, a "git shortlog" listing of the patches +themselves, and a diffstat showing the overall effect of the patch series. +The easiest way to get all this information together is, of course, to let +git do it for you with the "git request-pull" command. -'static inline' is preferred over 'static __inline__', 'extern inline', -and 'extern __inline__'. +Some maintainers (including Linus) want to see pull requests from signed +commits; that increases their confidence that the request actually came +from you. Linus, in particular, will not pull from public hosting sites +like GitHub in the absence of a signed tag. +The first step toward creating such tags is to make a GNUPG key and get it +signed by one or more core kernel developers. This step can be hard for +new developers, but there is no way around it. Attending conferences can +be a good way to find developers who can sign your key. +Once you have prepared a patch series in git that you wish to have somebody +pull, create a signed tag with "git tag -s". This will create a new tag +identifying the last commit in the series and containing a signature +created with your private key. You will also have the opportunity to add a +changelog-style message to the tag; this is an ideal place to describe the +effects of the pull request as a whole. -4) Don't over-design. +If the tree the maintainer will be pulling from is not the repository you +are working from, don't forget to push the signed tag explicitly to the +public tree. -Don't try to anticipate nebulous future cases which may or may not -be useful: "Make it as simple as you can, and no simpler." +When generating your pull request, use the signed tag as the target. A +command like this will do the trick: + git request-pull master git://my.public.tree/linux.git my-signed-tag ---------------------- -SECTION 3 - REFERENCES +SECTION 2 - REFERENCES ---------------------- Andrew Morton, "The perfect patch" (tpp). diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX index 3b08bc2b04cf..8edb9007844e 100644 --- a/Documentation/arm/00-INDEX +++ b/Documentation/arm/00-INDEX @@ -2,11 +2,15 @@ - this file Booting - requirements for booting +CCN.txt + - Cache Coherent Network ring-bus and perf PMU driver. Interrupts - ARM Interrupt subsystem documentation IXP4xx - Intel IXP4xx Network processor. -msm +Makefile + - Build sourcefiles as part of the Documentation-build for arm +msm/ - MSM specific documentation Netwinder - Netwinder specific documentation @@ -18,11 +22,9 @@ README - General ARM documentation SA1100/ - SA1100 documentation -Samsung-S3C24XX +Samsung-S3C24XX/ - S3C24XX ARM Linux Overview -Sharp-LH - - Linux on Sharp LH79524 and LH7A40X System On a Chip (SOC) -SPEAr +SPEAr/ - ST SPEAr platform Linux Overview VFP/ - Release notes for Linux Kernel Vector Floating Point support code diff --git a/Documentation/blackfin/Makefile b/Documentation/blackfin/Makefile index c7e6c99bad81..03f78059d6f5 100644 --- a/Documentation/blackfin/Makefile +++ b/Documentation/blackfin/Makefile @@ -1,3 +1,5 @@ ifneq ($(CONFIG_BLACKFIN),) +ifneq ($(CONFIG_BFIN_GPTIMERS,) obj-m := gptimers-example.o endif +endif diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt index c6ef8f13dc7e..74607b6c1117 100644 --- a/Documentation/devicetree/bindings/arm/msm/timer.txt +++ b/Documentation/devicetree/bindings/arm/msm/timer.txt @@ -8,7 +8,7 @@ Properties: "qcom,kpss-timer" - krait subsystem "qcom,scss-timer" - scorpion subsystem -- interrupts : Interrupts for the the debug timer, the first general purpose +- interrupts : Interrupts for the debug timer, the first general purpose timer, and optionally a second general purpose timer in that order. diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt index 93986a5a8018..3bacc8e0931e 100644 --- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt +++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt @@ -9,7 +9,7 @@ Properties: Compatibility with many Cavium evaluation boards. -- reg: The base address of the the CF chip select banks. Depending on +- reg: The base address of the CF chip select banks. Depending on the device configuration, there may be one or two banks. - cavium,bus-width: The width of the connection to the CF devices. Valid diff --git a/Documentation/devicetree/bindings/c6x/dscr.txt b/Documentation/devicetree/bindings/c6x/dscr.txt index b0e97144cfb1..92672235de57 100644 --- a/Documentation/devicetree/bindings/c6x/dscr.txt +++ b/Documentation/devicetree/bindings/c6x/dscr.txt @@ -12,7 +12,7 @@ configuration register for writes. These configuration register may be used to enable (and disable in some cases) SoC pin drivers, select peripheral clock sources (internal or pin), etc. In some cases, a configuration register is write once or the individual bits are write once. In addition to device config, -the DSCR block may provide registers which which are used to reset peripherals, +the DSCR block may provide registers which are used to reset peripherals, provide device ID information, provide ethernet MAC addresses, as well as other miscellaneous functions. diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt index df0f48bcf75a..f7e21b1c2a05 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt @@ -1,6 +1,6 @@ * Renesas R-Car DMA Controller Device Tree bindings -Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA +Renesas R-Car Generation 2 SoCs have multiple multi-channel DMA controller instances named DMAC capable of serving multiple clients. Channels can be dedicated to specific clients or shared between a large number of clients. diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt index d63194a2c848..ada4e2973323 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt @@ -39,7 +39,7 @@ Optional Properties: - lines-initial-states: Bitmask that specifies the initial state of each line. When a bit is set to zero, the corresponding line will be initialized to the input (pulled-up) state. When the bit is set to one, the line will be - initialized the the low-level output state. If the property is not specified + initialized the low-level output state. If the property is not specified all lines will be initialized to the input state. The I/O expander can detect input state changes, and thus optionally act as diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt index d9ee909d2b78..d71258e2d456 100644 --- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt @@ -59,7 +59,7 @@ Optional properties: Each child node represents one channel and has the following properties: Required properties: - * reg: Pair of pins the the channel is connected to. + * reg: Pair of pins the channel is connected to. 0: VP/VN 1: VAUXP[0]/VAUXN[0] 2: VAUXP[1]/VAUXN[1] diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt index ec42935f3908..5235cbc551b0 100644 --- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt @@ -9,7 +9,7 @@ Required properties: Optional properties: - bank-width : Width (in bytes) of the device. If not present, the width defaults to 1 byte -- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped +- nand-skip-bbtscan: Indicates the BBT scanning should be skipped - timings: array of 6 bytes for NAND timings. The meanings of these bytes are: byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt index aa7ad622259d..877da34145b0 100644 --- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt +++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt @@ -3,7 +3,7 @@ Required properties: - compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport" - reg: address and length of the register set for the device. -- interrupts: interrupts for the device, first cell must be for the the rx +- interrupts: interrupts for the device, first cell must be for the rx interrupts, and the second cell should be for the transmit queues. An optional third interrupt cell for Wake-on-LAN can be specified - local-mac-address: Ethernet MAC address (48 bits) of this adapter diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt index 6fbf6e7ecde6..8b70db103ca7 100644 --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt @@ -37,7 +37,7 @@ Required properties: You specify supplies using the standard regulator bindings by including -a phandle the the relevant regulator. All specified supplies must be able +a phandle the relevant regulator. All specified supplies must be able to report their voltage. The IO Voltage Domain for any non-specified supplies will be not be touched. diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt index 30ae758e3eef..d418a6ce9812 100644 --- a/Documentation/devicetree/overlay-notes.txt +++ b/Documentation/devicetree/overlay-notes.txt @@ -10,7 +10,7 @@ How overlays work ----------------- A Device Tree's overlay purpose is to modify the kernel's live tree, and -have the modification affecting the state of the the kernel in a way that +have the modification affecting the state of the kernel in a way that is reflecting the changes. Since the kernel mainly deals with devices, any new device node that result in an active device should have it created while if the device node is either @@ -80,7 +80,7 @@ result in foo+bar.dts }; ---- foo+bar.dts ------------------------------------------------------------- -As a result of the the overlay, a new device node (bar) has been created +As a result of the overlay, a new device node (bar) has been created so a bar platform device will be registered and if a matching device driver is loaded the device will be created as expected. diff --git a/Documentation/dmaengine/00-INDEX b/Documentation/dmaengine/00-INDEX new file mode 100644 index 000000000000..07de6573d22b --- /dev/null +++ b/Documentation/dmaengine/00-INDEX @@ -0,0 +1,8 @@ +00-INDEX + - this file. +client.txt + -the DMA Engine API Guide. +dmatest.txt + - how to compile, configure and use the dmatest system. +provider.txt + - the DMA controller API.
\ No newline at end of file diff --git a/Documentation/driver-model/bus.txt b/Documentation/driver-model/bus.txt index 6754b2df8aa1..b577a45b93ea 100644 --- a/Documentation/driver-model/bus.txt +++ b/Documentation/driver-model/bus.txt @@ -45,7 +45,7 @@ them are inherently bus-specific. Drivers typically declare an array of device IDs of devices they support that reside in a bus-specific driver structure. -The purpose of the match callback is provide the bus an opportunity to +The purpose of the match callback is to give the bus an opportunity to determine if a particular driver supports a particular device by comparing the device IDs the driver supports with the device ID of a particular device, without sacrificing bus-specific functionality or diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index aae9dd13c91f..79b3cc821e7b 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -28,7 +28,7 @@ Table of Contents 1.6 Parallel port info in /proc/parport 1.7 TTY info in /proc/tty 1.8 Miscellaneous kernel statistics in /proc/stat - 1.9 Ext4 file system parameters + 1.9 Ext4 file system parameters 2 Modifying System Parameters diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt index b797ed38de46..9de4303201e1 100644 --- a/Documentation/filesystems/seq_file.txt +++ b/Documentation/filesystems/seq_file.txt @@ -194,16 +194,16 @@ which is in the string esc will be represented in octal form in the output. There are also a pair of functions for printing filenames: - int seq_path(struct seq_file *m, struct path *path, char *esc); - int seq_path_root(struct seq_file *m, struct path *path, - struct path *root, char *esc) + int seq_path(struct seq_file *m, const struct path *path, + const char *esc); + int seq_path_root(struct seq_file *m, const struct path *path, + const struct path *root, const char *esc) Here, path indicates the file of interest, and esc is a set of characters which should be escaped in the output. A call to seq_path() will output the path relative to the current process's filesystem root. If a different -root is desired, it can be used with seq_path_root(). Note that, if it -turns out that path cannot be reached from root, the value of root will be -changed in seq_file_root() to a root which *does* work. +root is desired, it can be used with seq_path_root(). If it turns out that +path cannot be reached from root, seq_path_root() returns SEQ_SKIP. A function producing complicated output may want to check bool seq_has_overflowed(struct seq_file *m); diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt index 4452786225b8..8b35f51fe7b6 100644 --- a/Documentation/gpio/board.txt +++ b/Documentation/gpio/board.txt @@ -31,7 +31,7 @@ through gpiod_get(). For example: <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */ <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */ - power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>; + power-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; }; This property will make GPIOs 15, 16 and 17 available to the driver under the diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 4227ec2e3ab2..1488b6525eb6 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -702,7 +702,8 @@ a virtual address that is no longer valid (module init sections, module virtual addresses that correspond to modules that've been unloaded), such probes are marked with [GONE]. If the probe is temporarily disabled, such probes are marked with [DISABLED]. If the probe is optimized, it is -marked with [OPTIMIZED]. +marked with [OPTIMIZED]. If the probe is ftrace-based, it is marked with +[FTRACE]. /sys/kernel/debug/kprobes/enabled: Turn kprobes ON/OFF forcibly. diff --git a/Documentation/locking/00-INDEX b/Documentation/locking/00-INDEX new file mode 100644 index 000000000000..c256c9bee2a4 --- /dev/null +++ b/Documentation/locking/00-INDEX @@ -0,0 +1,16 @@ +00-INDEX + - this file. +lockdep-design.txt + - documentation on the runtime locking correctness validator. +lockstat.txt + - info on collecting statistics on locks (and contention). +mutex-design.txt + - info on the generic mutex subsystem. +rt-mutex-design.txt + - description of the RealTime mutex implementation design. +rt-mutex.txt + - desc. of RT-mutex subsystem with PI (Priority Inheritance) support. +spinlocks.txt + - info on using spinlocks to provide exclusive access in kernel. +ww-mutex-design.txt + - Intro to Mutex wait/would deadlock handling.s diff --git a/Documentation/locking/lockstat.txt b/Documentation/locking/lockstat.txt index 7428773a1e69..568bbbacee91 100644 --- a/Documentation/locking/lockstat.txt +++ b/Documentation/locking/lockstat.txt @@ -121,6 +121,11 @@ show the header with column descriptions. Lines 05-18 and 20-31 show the actual statistics. These statistics come in two parts; the actual stats separated by a short separator (line 08, 13) from the contention points. +Lines 09-12 show the first 4 recorded contention points (the code +which tries to get the lock) and lines 14-17 show the first 4 recorded +contended points (the lock holder). It is possible that the max +con-bounces point is missing in the statistics. + The first lock (05-18) is a read/write lock, and shows two lines above the short separator. The contention points don't match the column descriptors, they have two: contentions and [<IP>] symbol. The second set of contention diff --git a/Documentation/misc-devices/mei/mei-client-bus.txt b/Documentation/misc-devices/mei/mei-client-bus.txt index f83910a8ce76..743be4ec8989 100644 --- a/Documentation/misc-devices/mei/mei-client-bus.txt +++ b/Documentation/misc-devices/mei/mei-client-bus.txt @@ -1,9 +1,10 @@ Intel(R) Management Engine (ME) Client bus API -=============================================== +============================================== Rationale ========= + MEI misc character device is useful for dedicated applications to send and receive data to the many FW appliance found in Intel's ME from the user space. However for some of the ME functionalities it make sense to leverage existing software @@ -17,7 +18,8 @@ the existing code. MEI CL bus API -=========== +============== + A driver implementation for an MEI Client is very similar to existing bus based device drivers. The driver registers itself as an MEI CL bus driver through the mei_cl_driver structure: @@ -55,6 +57,7 @@ received buffers. Example ======= + As a theoretical example let's pretend the ME comes with a "contact" NFC IP. The driver init and exit routines for this device would look like: @@ -69,11 +72,11 @@ static struct mei_cl_device_id contact_mei_cl_tbl[] = { MODULE_DEVICE_TABLE(mei_cl, contact_mei_cl_tbl); static struct mei_cl_driver contact_driver = { - .id_table = contact_mei_tbl, - .name = CONTACT_DRIVER_NAME, + .id_table = contact_mei_tbl, + .name = CONTACT_DRIVER_NAME, - .probe = contact_probe, - .remove = contact_remove, + .probe = contact_probe, + .remove = contact_remove, }; static int contact_init(void) @@ -109,7 +112,7 @@ int contact_probe(struct mei_cl_device *dev, struct mei_cl_device_id *id) mei_cl_register_event_cb(dev, contact_event_cb, contact); return 0; - } +} In the probe routine the driver first enable the MEI device and then registers an ME bus event handler which is as close as it can get to registering a diff --git a/Documentation/misc-devices/mei/mei.txt b/Documentation/misc-devices/mei/mei.txt index 15bba1aeba9a..8d47501bba0a 100644 --- a/Documentation/misc-devices/mei/mei.txt +++ b/Documentation/misc-devices/mei/mei.txt @@ -1,8 +1,8 @@ Intel(R) Management Engine Interface (Intel(R) MEI) -======================= +=================================================== Introduction -======================= +============ The Intel Management Engine (Intel ME) is an isolated and protected computing resource (Co-processor) residing inside certain Intel chipsets. The Intel ME @@ -19,7 +19,7 @@ each client has its own protocol. The protocol is message-based with a header and payload up to 512 bytes. Prominent usage of the Intel ME Interface is to communicate with Intel(R) -Active Management Technology (Intel AMT)implemented in firmware running on +Active Management Technology (Intel AMT) implemented in firmware running on the Intel ME. Intel AMT provides the ability to manage a host remotely out-of-band (OOB) @@ -44,8 +44,9 @@ HTTP/S that are received from a remote management console application. For more information about Intel AMT: http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide + Intel MEI Driver -======================= +================ The driver exposes a misc device called /dev/mei. @@ -91,8 +92,10 @@ A code snippet for an application communicating with Intel AMTHI client: [...] close(fd); -IOCTL: -====== + +IOCTL +===== + The Intel MEI Driver supports the following IOCTL command: IOCTL_MEI_CONNECT_CLIENT Connect to firmware Feature (client). @@ -122,58 +125,61 @@ The Intel MEI Driver supports the following IOCTL command: data that can be sent or received. (e.g. if MTU=2K, can send requests up to bytes 2k and received responses up to 2k bytes). -Intel ME Applications: -============== - -1) Intel Local Management Service (Intel LMS) - - Applications running locally on the platform communicate with Intel AMT Release - 2.0 and later releases in the same way that network applications do via SOAP - over HTTP (deprecated starting with Release 6.0) or with WS-Management over - SOAP over HTTP. This means that some Intel AMT features can be accessed from a - local application using the same network interface as a remote application - communicating with Intel AMT over the network. - - When a local application sends a message addressed to the local Intel AMT host - name, the Intel LMS, which listens for traffic directed to the host name, - intercepts the message and routes it to the Intel MEI. - For more information: - http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide - Under "About Intel AMT" => "Local Access" - - For downloading Intel LMS: - http://software.intel.com/en-us/articles/download-the-latest-intel-amt-open-source-drivers/ - - The Intel LMS opens a connection using the Intel MEI driver to the Intel LMS - firmware feature using a defined UUID and then communicates with the feature - using a protocol called Intel AMT Port Forwarding Protocol(Intel APF protocol). - The protocol is used to maintain multiple sessions with Intel AMT from a - single application. - - See the protocol specification in the Intel AMT Software Development Kit(SDK) - http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide - Under "SDK Resources" => "Intel(R) vPro(TM) Gateway(MPS)" - => "Information for Intel(R) vPro(TM) Gateway Developers" - => "Description of the Intel AMT Port Forwarding (APF)Protocol" - - 2) Intel AMT Remote configuration using a Local Agent - A Local Agent enables IT personnel to configure Intel AMT out-of-the-box - without requiring installing additional data to enable setup. The remote - configuration process may involve an ISV-developed remote configuration - agent that runs on the host. - For more information: - http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide - Under "Setup and Configuration of Intel AMT" => - "SDK Tools Supporting Setup and Configuration" => - "Using the Local Agent Sample" - - An open source Intel AMT configuration utility, implementing a local agent - that accesses the Intel MEI driver, can be found here: - http://software.intel.com/en-us/articles/download-the-latest-intel-amt-open-source-drivers/ - - -Intel AMT OS Health Watchdog: -============================= + +Intel ME Applications +===================== + + 1) Intel Local Management Service (Intel LMS) + + Applications running locally on the platform communicate with Intel AMT Release + 2.0 and later releases in the same way that network applications do via SOAP + over HTTP (deprecated starting with Release 6.0) or with WS-Management over + SOAP over HTTP. This means that some Intel AMT features can be accessed from a + local application using the same network interface as a remote application + communicating with Intel AMT over the network. + + When a local application sends a message addressed to the local Intel AMT host + name, the Intel LMS, which listens for traffic directed to the host name, + intercepts the message and routes it to the Intel MEI. + For more information: + http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide + Under "About Intel AMT" => "Local Access" + + For downloading Intel LMS: + http://software.intel.com/en-us/articles/download-the-latest-intel-amt-open-source-drivers/ + + The Intel LMS opens a connection using the Intel MEI driver to the Intel LMS + firmware feature using a defined UUID and then communicates with the feature + using a protocol called Intel AMT Port Forwarding Protocol (Intel APF protocol). + The protocol is used to maintain multiple sessions with Intel AMT from a + single application. + + See the protocol specification in the Intel AMT Software Development Kit (SDK) + http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide + Under "SDK Resources" => "Intel(R) vPro(TM) Gateway (MPS)" + => "Information for Intel(R) vPro(TM) Gateway Developers" + => "Description of the Intel AMT Port Forwarding (APF) Protocol" + + 2) Intel AMT Remote configuration using a Local Agent + + A Local Agent enables IT personnel to configure Intel AMT out-of-the-box + without requiring installing additional data to enable setup. The remote + configuration process may involve an ISV-developed remote configuration + agent that runs on the host. + For more information: + http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide + Under "Setup and Configuration of Intel AMT" => + "SDK Tools Supporting Setup and Configuration" => + "Using the Local Agent Sample" + + An open source Intel AMT configuration utility, implementing a local agent + that accesses the Intel MEI driver, can be found here: + http://software.intel.com/en-us/articles/download-the-latest-intel-amt-open-source-drivers/ + + +Intel AMT OS Health Watchdog +============================ + The Intel AMT Watchdog is an OS Health (Hang/Crash) watchdog. Whenever the OS hangs or crashes, Intel AMT will send an event to any subscriber to this event. This mechanism means that @@ -192,8 +198,10 @@ watchdog is 120 seconds. If the Intel AMT Watchdog feature does not exist (i.e. the connection failed), the Intel MEI driver will disable the sending of heartbeats. -Supported Chipsets: + +Supported Chipsets ================== + 7 Series Chipset Family 6 Series Chipset Family 5 Series Chipset Family diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 557b6ef70c26..df27a1a50776 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -1,7 +1,5 @@ 00-INDEX - this file -3c505.txt - - information on the 3Com EtherLink Plus (3c505) driver. 3c509.txt - information on the 3Com Etherlink III Series Ethernet cards. 6pack.txt @@ -24,6 +22,8 @@ README.sb1000 - info on General Instrument/NextLevel SURFboard1000 cable modem. alias.txt - info on using alias network devices. +altera_tse.txt + - Altera Triple-Speed Ethernet controller. arcnet-hardware.txt - tons of info on ARCnet, hubs, jumper settings for ARCnet cards, etc. arcnet.txt @@ -42,6 +42,8 @@ bridge.txt - where to get user space programs for ethernet bridging with Linux. can.txt - documentation on CAN protocol family. +cdc_mbim.txt + - 3G/LTE USB modem (Mobile Broadband Interface Model) cops.txt - info on the COPS LocalTalk Linux driver cs89x0.txt @@ -54,6 +56,8 @@ cxgb.txt - Release Notes for the Chelsio N210 Linux device driver. dccp.txt - the Datagram Congestion Control Protocol (DCCP) (RFC 4340..42). +dctcp.txt + - DataCenter TCP congestion control de4x5.txt - the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver decnet.txt diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 2236d6dcb7da..0a2859a8ee7e 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -234,7 +234,7 @@ solution for a couple of reasons: mechanisms. Inside this filter definition the (interested) type of errors may be selected. The reception of error messages is disabled by default. The format of the CAN error message frame is briefly - described in the Linux header file "include/linux/can/error.h". + described in the Linux header file "include/uapi/linux/can/error.h". 4. How to use SocketCAN ------------------------ diff --git a/Documentation/scheduler/completion.txt b/Documentation/scheduler/completion.txt new file mode 100644 index 000000000000..f77651eca31e --- /dev/null +++ b/Documentation/scheduler/completion.txt @@ -0,0 +1,236 @@ +completions - wait for completion handling +========================================== + +This document was originally written based on 3.18.0 (linux-next) + +Introduction: +------------- + +If you have one or more threads of execution that must wait for some process +to have reached a point or a specific state, completions can provide a race +free solution to this problem. Semantically they are somewhat like a +pthread_barriers and have similar use-cases. + +Completions are a code synchronization mechanism that is preferable to any +misuse of locks. Any time you think of using yield() or some quirky +msleep(1); loop to allow something else to proceed, you probably want to +look into using one of the wait_for_completion*() calls instead. The +advantage of using completions is clear intent of the code but also more +efficient code as both threads can continue until the result is actually +needed. + +Completions are built on top of the generic event infrastructure in Linux, +with the event reduced to a simple flag appropriately called "done" in +struct completion, that tells the waiting threads of execution if they +can continue safely. + +As completions are scheduling related the code is found in +kernel/sched/completion.c - for details on completion design and +implementation see completions-design.txt + + +Usage: +------ + +There are three parts to the using completions, the initialization of the +struct completion, the waiting part through a call to one of the variants of +wait_for_completion() and the signaling side through a call to complete(), +or complete_all(). Further there are some helper functions for checking the +state of completions. + +To use completions one needs to include <linux/completion.h> and +create a variable of type struct completion. The structure used for +handling of completions is: + + struct completion { + unsigned int done; + wait_queue_head_t wait; + }; + +providing the wait queue to place tasks on for waiting and the flag for +indicating the state of affairs. + +Completions should be named to convey the intent of the waiter. A good +example is: + + wait_for_completion(&early_console_added); + + complete(&early_console_added); + +Good naming (as always) helps code readability. + + +Initializing completions: +------------------------- + +Initialization of dynamically allocated completions, often embedded in +other structures, is done with: + + void init_completion(&done); + +Initialization is accomplished by initializing the wait queue and setting +the default state to "not available", that is, "done" is set to 0. + +The re-initialization function, reinit_completion(), simply resets the +done element to "not available", thus again to 0, without touching the +wait queue. Calling init_completion() on the same completions object is +most likely a bug as it re-initializes the queue to an empty queue and +enqueued tasks could get "lost" - use reinit_completion() in that case. + +For static declaration and initialization, macros are available. These are: + + static DECLARE_COMPLETION(setup_done) + +used for static declarations in file scope. Within functions the static +initialization should always use: + + DECLARE_COMPLETION_ONSTACK(setup_done) + +suitable for automatic/local variables on the stack and will make lockdep +happy. Note also that one needs to making *sure* the completion passt to +work threads remains in-scope, and no references remain to on-stack data +when the initiating function returns. + + +Waiting for completions: +------------------------ + +For a thread of execution to wait for some concurrent work to finish, it +calls wait_for_completion() on the initialized completion structure. +A typical usage scenario is: + + structure completion setup_done; + init_completion(&setup_done); + initialze_work(...,&setup_done,...) + + /* run non-dependent code */ /* do setup */ + + wait_for_completion(&seupt_done); complete(setup_done) + +This is not implying any temporal order of wait_for_completion() and the +call to complete() - if the call to complete() happened before the call +to wait_for_completion() then the waiting side simply will continue +immediately as all dependencies are satisfied. + +Note that wait_for_completion() is calling spin_lock_irq/spin_unlock_irq +so it can only be called safely when you know that interrupts are enabled. +Calling it from hard-irq context will result in hard to detect spurious +enabling of interrupts. + +wait_for_completion(): + + void wait_for_completion(struct completion *done): + +The default behavior is to wait without a timeout and mark the task as +uninterruptible. wait_for_completion() and its variants are only safe +in soft-interrupt or process context but not in hard-irq context. +As all variants of wait_for_completion() can (obviously) block for a long +time, you probably don't want to call this with held locks - see also +try_wait_for_completion() below. + + +Variants available: +------------------- + +The below variants all return status and this status should be checked in +most(/all) cases - in cases where the status is deliberately not checked you +probably want to make a note explaining this (e.g. see +arch/arm/kernel/smp.c:__cpu_up()). + +A common problem that occurs is to have unclean assignment of return types, +so care should be taken with assigning return-values to variables of proper +type. Checking for the specific meaning of return values also has been found +to be quite inaccurate e.g. constructs like +if(!wait_for_completion_interruptible_timeout(...)) would execute the same +code path for successful completion and for the interrupted case - which is +probably not what you want. + + int wait_for_completion_interruptible(struct completion *done) + +marking the task TASK_INTERRUPTIBLE. If a signal was received while waiting. +It will return -ERESTARTSYS and 0 otherwise. + + unsigned long wait_for_completion_timeout(struct completion *done, + unsigned long timeout) + +The task is marked as TASK_UNINTERRUPTIBLE and will wait at most timeout +(in jiffies). If timeout occurs it return 0 else the remaining time in +jiffies (but at least 1). Timeouts are preferably passed by msecs_to_jiffies() +or usecs_to_jiffies(). If the returned timeout value is deliberately ignored +a comment should probably explain why (e.g. see drivers/mfd/wm8350-core.c +wm8350_read_auxadc()) + + long wait_for_completion_interruptible_timeout( + struct completion *done, unsigned long timeout) + +passing a timeout in jiffies and marking the task as TASK_INTERRUPTIBLE. If a +signal was received it will return -ERESTARTSYS, 0 if completion timed-out and +the remaining time in jiffies if completion occurred. + +Further variants include _killable which passes TASK_KILLABLE as the +designated tasks state and will return a -ERESTARTSYS if interrupted or +else 0 if completions was achieved as well as a _timeout variant. + + long wait_for_completion_killable(struct completion *done) + long wait_for_completion_killable_timeout(struct completion *done, + unsigned long timeout) + +The _io variants wait_for_completion_io behave the same as the non-_io +variants, except for accounting waiting time as waiting on IO, which has +an impact on how scheduling is calculated. + + void wait_for_completion_io(struct completion *done) + unsigned long wait_for_completion_io_timeout(struct completion *done + unsigned long timeout) + + +Signaling completions: +---------------------- + +A thread of execution that wants to signal that the conditions for +continuation have been achieved calls complete() to signal exactly one +of the waiters that it can continue. + + void complete(struct completion *done) + +or calls complete_all to signal all current and future waiters. + + void complete_all(struct completion *done) + +The signaling will work as expected even if completions are signaled before +a thread starts waiting. This is achieved by the waiter "consuming" +(decrementing) the done element of struct completion. Waiting threads +wakeup order is the same in which they were enqueued (FIFO order). + +If complete() is called multiple times then this will allow for that number +of waiters to continue - each call to complete() will simply increment the +done element. Calling complete_all() multiple times is a bug though. Both +complete() and complete_all() can be called in hard-irq context safely. + +There only can be one thread calling complete() or complete_all() on a +particular struct completions at any time - serialized through the wait +queue spinlock. Any such concurrent calls to complete() or complete_all() +probably are a design bug. + +Signaling completion from hard-irq context is fine as it will appropriately +lock with spin_lock_irqsave/spin_unlock_irqrestore. + + +try_wait_for_completion()/completion_done(): +-------------------------------------------- + +The try_wait_for_completion will not put the thread on the wait queue but +rather returns false if it would need to enqueue (block) the thread, else it +consumes any posted completions and returns true. + + bool try_wait_for_completion(struct completion *done) + +Finally to check state of a completions without changing it in any way is +provided by completion_done() returning false if there are any posted +completion that was not yet consumed by waiters implying that there are +waiters and true otherwise; + + bool completion_done(struct completion *done) + +Both try_wait_for_completion() and completion_done() are safe to be called in +hard-irq context. diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 4415aa915681..de3afef76837 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -728,7 +728,7 @@ The default value is 60. - user_reserve_kbytes -When overcommit_memory is set to 2, "never overommit" mode, reserve +When overcommit_memory is set to 2, "never overcommit" mode, reserve min(3% of current process size, user_reserve_kbytes) of free memory. This is intended to prevent a user from starting a single memory hogging process, such that they cannot recover (kill the hog). diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index 8408e040f06f..572ca923631a 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -1740,7 +1740,7 @@ no pid yum-updatesd-3111 [003] 1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel yum-updatesd-3111 [003] 1637.254685: fget_light <-do_sys_poll yum-updatesd-3111 [003] 1637.254686: pipe_poll <-do_sys_poll -# echo -1 > set_ftrace_pid +# echo > set_ftrace_pid # cat trace |head # tracer: function # diff --git a/MAINTAINERS b/MAINTAINERS index 43c293276a92..cc66549dd761 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3226,6 +3226,7 @@ F: Documentation/ X: Documentation/ABI/ X: Documentation/devicetree/ X: Documentation/[a-z][a-z]_[A-Z][A-Z]/ +T: git git://git.lwn.net/linux-2.6.git docs-next DOUBLETALK DRIVER M: "James R. Van Zandt" <jrv@vanzandt.mv.com> |