diff options
| author | Bob Nelson <rrnelson@linux.vnet.ibm.com> | 2007-07-20 21:39:53 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@klappe.arndb.de> | 2007-07-20 21:42:24 +0200 |
| commit | 1474855d0878cced6f39f51f3c2bd7428b44cb1e (patch) | |
| tree | cbad42404bfc0f7222d0a88e4ed9b0e9e0d0cb50 | |
| parent | 36aaccc1e96481e8310b1d13600096da0f24ff43 (diff) | |
[CELL] oprofile: add support to OProfile for profiling CELL BE SPUs
From: Maynard Johnson <mpjohn@us.ibm.com>
This patch updates the existing arch/powerpc/oprofile/op_model_cell.c
to add in the SPU profiling capabilities. In addition, a 'cell' subdirectory
was added to arch/powerpc/oprofile to hold Cell-specific SPU profiling code.
Exports spu_set_profile_private_kref and spu_get_profile_private_kref which
are used by OProfile to store private profile information in spufs data
structures.
Also incorporated several fixes from other patches (rrn). Check pointer
returned from kzalloc. Eliminated unnecessary cast. Better error
handling and cleanup in the related area. 64-bit unsigned long parameter
was being demoted to 32-bit unsigned int and eventually promoted back to
unsigned long.
Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: Bob Nelson <rrnelson@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
26 files changed, 1828 insertions, 133 deletions
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 74f83f4a4e5e..d9ac24e8de16 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1455,7 +1455,8 @@ CONFIG_HAS_DMA=y # Instrumentation Support # CONFIG_PROFILING=y -CONFIG_OPROFILE=y +CONFIG_OPROFILE=m +CONFIG_OPROFILE_CELL=y # CONFIG_KPROBES is not set # diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index e5df167f7824..727a6699f2f4 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -122,6 +122,7 @@ extern struct timezone sys_tz; static long timezone_offset; unsigned long ppc_proc_freq; +EXPORT_SYMBOL(ppc_proc_freq); unsigned long ppc_tb_freq; static u64 tb_last_jiffy __cacheline_aligned_in_smp; diff --git a/arch/powerpc/oprofile/Kconfig b/arch/powerpc/oprofile/Kconfig index eb2dece76a54..7089e79689b9 100644 --- a/arch/powerpc/oprofile/Kconfig +++ b/arch/powerpc/oprofile/Kconfig @@ -15,3 +15,10 @@ config OPROFILE If unsure, say N. +config OPROFILE_CELL + bool "OProfile for Cell Broadband Engine" + depends on (SPU_FS = y && OPROFILE = m) || (SPU_FS = y && OPROFILE = y) || (SPU_FS = m && OPROFILE = m) + default y + help + Profiling of Cell BE SPUs requires special support enabled + by this option. diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index 4b5f9528218c..c5f64c3bd668 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -11,7 +11,9 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ timer_int.o ) oprofile-y := $(DRIVER_OBJS) common.o backtrace.o -oprofile-$(CONFIG_PPC_CELL_NATIVE) += op_model_cell.o +oprofile-$(CONFIG_OPROFILE_CELL) += op_model_cell.o \ + cell/spu_profiler.o cell/vma_map.o \ + cell/spu_task_sync.o oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o oprofile-$(CONFIG_6xx) += op_model_7450.o diff --git a/arch/powerpc/oprofile/cell/pr_util.h b/arch/powerpc/oprofile/cell/pr_util.h new file mode 100644 index 000000000000..e5704f00c8b4 --- /dev/null +++ b/arch/powerpc/oprofile/cell/pr_util.h @@ -0,0 +1,97 @@ + /* + * Cell Broadband Engine OProfile Support + * + * (C) Copyright IBM Corporation 2006 + * + * Author: Maynard Johnson <maynardj@us.ibm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef PR_UTIL_H +#define PR_UTIL_H + +#include <linux/cpumask.h> +#include <linux/oprofile.h> +#include <asm/cell-pmu.h> +#include <asm/spu.h> + +#include "../../platforms/cell/cbe_regs.h" + +/* Defines used for sync_start */ +#define SKIP_GENERIC_SYNC 0 +#define SYNC_START_ERROR -1 +#define DO_GENERIC_SYNC 1 + +struct spu_overlay_info { /* map of sections within an SPU overlay */ + unsigned int vma; /* SPU virtual memory address from elf */ + unsigned int size; /* size of section from elf */ + unsigned int offset; /* offset of section into elf file */ + unsigned int buf; +}; + +struct vma_to_fileoffset_map { /* map of sections within an SPU program */ + struct vma_to_fileoffset_map *next; /* list pointer */ + unsigned int vma; /* SPU virtual memory address from elf */ + unsigned int size; /* size of section from elf */ + unsigned int offset; /* offset of section into elf file */ + unsigned int guard_ptr; + unsigned int guard_val; + /* + * The guard pointer is an entry in the _ovly_buf_table, + * computed using ovly.buf as the index into the table. Since + * ovly.buf values begin at '1' to reference the first (or 0th) + * entry in the _ovly_buf_table, the computation subtracts 1 + * from ovly.buf. + * The guard value is stored in the _ovly_buf_table entry and + * is an index (starting at 1) back to the _ovly_table entry + * that is pointing at this _ovly_buf_table entry. So, for + * example, for an overlay scenario with one overlay segment + * and two overlay sections: + * - Section 1 points to the first entry of the + * _ovly_buf_table, which contains a guard value + * of '1', referencing the first (index=0) entry of + * _ovly_table. + * - Section 2 points to the second entry of the + * _ovly_buf_table, which contains a guard value + * of '2', referencing the second (index=1) entry of + * _ovly_table. + */ + +}; + +/* The three functions below are for maintaining and accessing + * the vma-to-fileoffset map. + */ +struct vma_to_fileoffset_map *create_vma_map(const struct spu *spu, + u64 objectid); +unsigned int vma_map_lookup(struct vma_to_fileoffset_map *map, + unsigned int vma, const struct spu *aSpu, + int *grd_val); +void vma_map_free(struct vma_to_fileoffset_map *map); + +/* + * Entry point for SPU profiling. + * cycles_reset is the SPU_CYCLES count value specified by the user. + */ +int start_spu_profiling(unsigned int cycles_reset); + +void stop_spu_profiling(void); + + +/* add the necessary profiling hooks */ +int spu_sync_start(void); + +/* remove the hooks */ +int spu_sync_stop(void); + +/* Record SPU program counter samples to the oprofile event buffer. */ +void spu_sync_buffer(int spu_num, unsigned int *samples, + int num_samples); + +void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_reset); + +#endif /* PR_UTIL_H */ diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c new file mode 100644 index 000000000000..380d7e217531 --- /dev/null +++ b/arch/powerpc/oprofile/cell/spu_profiler.c @@ -0,0 +1,221 @@ +/* + * Cell Broadband Engine OProfile Support + * + * (C) Copyright IBM Corporation 2006 + * + * Authors: Maynard Johnson <maynardj@us.ibm.com> + * Carl Love <carll@us.ibm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/hrtimer.h> +#include <linux/smp.h> +#include <linux/slab.h> +#include <asm/cell-pmu.h> +#include "pr_util.h" + +#define TRACE_ARRAY_SIZE 1024 +#define SCALE_SHIFT 14 + +static u32 *samples; + +static int spu_prof_running; +static unsigned int profiling_interval; + +#define NUM_SPU_BITS_TRBUF 16 +#define SPUS_PER_TB_ENTRY 4 +#define SPUS_PER_NODE 8 + +#define SPU_PC_MASK 0xFFFF + +static DEFINE_SPINLOCK(sample_array_lock); +unsigned long sample_array_lock_flags; + +void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_reset) +{ + unsigned long ns_per_cyc; + + if (!freq_khz) + freq_khz = ppc_proc_freq/1000; + + /* To calculate a timeout in nanoseconds, the basic + * formula is ns = cycles_reset * (NSEC_PER_SEC / cpu frequency). + * To avoid floating point math, we use the scale math + * technique as described in linux/jiffies.h. We use + * a scale factor of SCALE_SHIFT, which provides 4 decimal places + * of precision. This is close enough for the purpose at hand. + * + * The value of the timeout should be small enough that the hw + * trace buffer will not get more then about 1/3 full for the + * maximum user specified (the LFSR value) hw sampling frequency. + * This is to ensure the trace buffer will never fill even if the + * kernel thread scheduling varies under a heavy system load. + */ + + ns_per_cyc = (USEC_PER_SEC << SCALE_SHIFT)/freq_khz; + profiling_interval = (ns_per_cyc * cycles_reset) >> SCALE_SHIFT; + +} + +/* + * Extract SPU PC from trace buffer entry + */ +static void spu_pc_extract(int cpu, int entry) +{ + /* the trace buffer is 128 bits */ + u64 trace_buffer[2]; + u64 spu_mask; + int spu; + + spu_mask = SPU_PC_MASK; + + /* Each SPU PC is 16 bits; hence, four spus in each of + * the two 64-bit buffer entries that make up the + * 128-bit trace_buffer entry. Process two 64-bit values + * simultaneously. + * trace[0] SPU PC contents are: 0 1 2 3 + * trace[1] SPU PC contents are: 4 5 6 7 + */ + + cbe_read_trace_buffer(cpu, trace_buffer); + + for (spu = SPUS_PER_TB_ENTRY-1; spu >= 0; spu--) { + /* spu PC trace entry is upper 16 bits of the + * 18 bit SPU program counter + */ + samples[spu * TRACE_ARRAY_SIZE + entry] + = (spu_mask & trace_buffer[0]) << 2; + samples[(spu + SPUS_PER_TB_ENTRY) * TRACE_ARRAY_SIZE + entry] + = (spu_mask & trace_buffer[1]) << 2; + + trace_buffer[0] = trace_buffer[0] >> NUM_SPU_BITS_TRBUF; + trace_buffer[1] = trace_buffer[1] >> NUM_SPU_BITS_TRBUF; + } +} + +static int cell_spu_pc_collection(int cpu) +{ + u32 trace_addr; + int entry; + + /* process the collected SPU PC for the node */ + + entry = 0; + + trace_addr = cbe_read_pm(cpu, trace_address); + while (!(trace_addr & CBE_PM_TRACE_BUF_EMPTY)) { + /* there is data in the trace buffer to process */ + spu_pc_extract(cpu, entry); + + entry++; + + if (entry >= TRACE_ARRAY_SIZE) + /* spu_samples is full */ + break; + + trace_addr = cbe_read_pm(cpu, trace_address); + } + + return entry; +} + + +static enum hrtimer_restart profile_spus(struct hrtimer *timer) +{ + ktime_t kt; + int cpu, node, k, num_samples, spu_num; + + if (!spu_prof_running) + goto stop; + + for_each_online_cpu(cpu) { + if (cbe_get_hw_thread_id(cpu)) + continue; + + node = cbe_cpu_to_node(cpu); + + /* There should only be one kernel thread at a time processing + * the samples. In the very unlikely case that the processing + * is taking a very long time and multiple kernel threads are + * started to process the samples. Make sure only one kernel + * thread is working on the samples array at a time. The + * sample array must be loaded and then processed for a given + * cpu. The sample array is not per cpu. + */ + spin_lock_irqsave(&sample_array_lock, + sample_array_lock_flags); + num_samples = cell_spu_pc_collection(cpu); + + if (num_samples == 0) { + spin_unlock_irqrestore(&sample_array_lock, + sample_array_lock_flags); + continue; + } + + for (k = 0; k < SPUS_PER_NODE; k++) { + spu_num = k + (node * SPUS_PER_NODE); + spu_sync_buffer(spu_num, + samples + (k * TRACE_ARRAY_SIZE), + num_samples); + } + + spin_unlock_irqrestore(&sample_array_lock, + sample_array_lock_flags); + + } + smp_wmb(); /* insure spu event buffer updates are written */ + /* don't want events intermingled... */ + + kt = ktime_set(0, profiling_interval); + if (!spu_prof_running) + goto stop; + hrtimer_forward(timer, timer->base->get_time(), kt); + return HRTIMER_RESTART; + + stop: + printk(KERN_INFO "SPU_PROF: spu-prof timer ending\n"); + return HRTIMER_NORESTART; +} + +static struct hrtimer timer; +/* + * Entry point for SPU profiling. + * NOTE: SPU profiling is done system-wide, not per-CPU. + * + * cycles_reset is the count value specified by the user when + * setting up OProfile to count SPU_CYCLES. + */ +int start_spu_profiling(unsigned int cycles_reset) +{ + ktime_t kt; + + pr_debug("timer resolution: %lu\n", TICK_NSEC); + kt = ktime_set(0, profiling_interval); + hrtimer_init(&timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + timer.expires = kt; + timer.function = profile_spus; + + /* Allocate arrays for collecting SPU PC samples */ + samples = kzalloc(SPUS_PER_NODE * + TRACE_ARRAY_SIZE * sizeof(u32), GFP_KERNEL); + + if (!samples) + return -ENOMEM; + + spu_prof_running = 1; + hrtimer_start(&timer, kt, HRTIMER_MODE_REL); + + return 0; +} + +void stop_spu_profiling(void) +{ + spu_prof_running = 0; + hrtimer_cancel(&timer); + kfree(samples); + pr_debug("SPU_PROF: stop_spu_profiling issued\n"); +} diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c new file mode 100644 index 000000000000..133665754a75 --- /dev/null +++ b/arch/powerpc/oprofile/cell/spu_task_sync.c @@ -0,0 +1,484 @@ +/* + * Cell Broadband Engine OProfile Support + * + * (C) Copyright IBM Corporation 2006 + * + * Author: Maynard Johnson <maynardj@us.ibm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* The purpose of this file is to handle SPU event task switching + * and to record SPU context information into the OProfile + * event buffer. + * + * Additionally, the spu_sync_buffer function is provided as a helper + * for recoding actual SPU program counter samples to the event buffer. + */ +#include <linux/dcookies.h> +#include <linux/kref.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/numa.h> +#include <linux/oprofile.h> +#include <linux/spinlock.h> +#include "pr_util.h" + +#define RELEASE_ALL 9999 + +static DEFINE_SPINLOCK(buffer_lock); +static DEFINE_SPINLOCK(cache_lock); +static int num_spu_nodes; +int spu_prof_num_nodes; +int last_guard_val[MAX_NUMNODES * 8]; + +/* Container for caching information about an active SPU task. */ +struct cached_info { + struct vma_to_fileoffset_map *map; + struct spu *the_spu; /* needed to access pointer to local_store */ + struct kref cache_ref; +}; + +static struct cached_info *spu_info[MAX_NUMNODES * 8]; + +static void destroy_cached_info(struct kref *kref) +{ + struct cached_info *info; + + info = container_of(kref, struct cached_info, cache_ref); + vma_map_free(info->map); + kfree(info); + module_put(THIS_MODULE); +} + +/* Return the cached_info for the passed SPU number. + * ATTENTION: Callers are responsible for obtaining the + * cache_lock if needed prior to invoking this function. + */ +static struct cached_info *get_cached_info(struct spu *the_spu, int spu_num) +{ + struct kref *ref; + struct cached_info *ret_info; + + if (spu_num >= num_spu_nodes) { + printk(KERN_ERR "SPU_PROF: " + "%s, line %d: Invalid index %d into spu info cache\n", + __FUNCTION__, __LINE__, spu_num); + ret_info = NULL; + goto out; + } + if (!spu_info[spu_num] && the_spu) { + ref = spu_get_profile_private_kref(the_spu->ctx); + if (ref) { + spu_info[spu_num] = container_of(ref, struct cached_info, cache_ref); + kref_get(&spu_info[spu_num]->cache_ref); + } + } + + ret_info = spu_info[spu_num]; + out: + return ret_info; +} + + +/* Looks for cached info for the passed spu. If not found, the + * cached info is created for the passed spu. + * Returns 0 for success; otherwise, -1 for error. + */ +static int +prepare_cached_spu_info(struct spu *spu, unsigned long objectId) +{ + unsigned long flags; + struct vma_to_fileoffset_map *new_map; + int retval = 0; + struct cached_info *info; + + /* We won't bother getting cache_lock here since + * don't do anything with the cached_info that's returned. + */ + info = get_cached_info(spu, spu->number); + + if (info) { + pr_debug("Found cached SPU info.\n"); + goto out; + } + + /* Create cached_info and set spu_info[spu->number] to point to it. + * spu->number is a system-wide value, not a per-node value. + */ + info = kzalloc(sizeof(struct cached_info), GFP_KERNEL); + if (!info) { + printk(KERN_ERR "SPU_PROF: " + "%s, line %d: create vma_map failed\n", + __FUNCTION__, __LINE__); + retval = -ENOMEM; + goto err_alloc; + } + new_map = create_vma_map(spu, objectId); + if (!new_map) { + printk(KERN_ERR "SPU_PROF: " + "%s, line %d: create vma_map failed\n", + __FUNCTION__, __LINE__); + retval = -ENOMEM; + goto err_alloc; + } + + pr_debug("Created vma_map\n"); + info->map = new_map; + info->the_spu = spu; + kref_init(&info->cache_ref); + spin_lock_irqsave(&cache_lock, flags); + spu_info[spu->number] = info; + /* Increment count before passing off ref to SPUFS. */ + kref_get(&info->cache_ref); + + /* We increment the module refcount here since SPUFS is + * responsible for the final destruction of the cached_info, + * and it must be able to access the destroy_cached_info() + * function defined in the OProfile module. We decrement + * the module refcount in destroy_cached_info. + */ + try_module_get(THIS_MODULE); + spu_set_profile_private_kref(spu->ctx, &info->cache_ref, + destroy_cached_info); + spin_unlock_irqrestore(&cache_lock, flags); + goto out; + +err_alloc: + kfree(info); +out: + return retval; +} + +/* + * NOTE: The caller is responsible for locking the + * cache_lock prior to calling this function. + */ +static int release_cached_info(int spu_index) +{ + int index, end; + + if (spu_index == RELEASE_ALL) { + end = num_spu_nodes; + index = 0; + } else { + if (spu_index >= num_spu_nodes) { + printk(KERN_ERR "SPU_PROF: " + "%s, line %d: " + "Invalid index %d into spu info cache\n", + __FUNCTION__, __LINE__, spu_index); + goto out; + } + end = spu_index + 1; + index = spu_index; + } + for (; index < end; index++) { + if (spu_info[index]) { + kref_put(&spu_info[index]->cache_ref, + destroy_cached_info); + spu_info[index] = NULL; + } + } + +out: + return 0; +} + +/* The source code for fast_get_dcookie was "borrowed" + * from drivers/oprofile/buffer_sync.c. + */ + +/* Optimisation. We can manage without taking the dcookie sem + * because we cannot reach this code without at least one + * dcookie user still being registered (namely, the reader + * of the event buffer). + */ +static inline unsigned long fast_get_dcookie(struct dentry *dentry, + struct vfsmount *vfsmnt) +{ + unsigned long cookie; + + if (dentry->d_cookie) + return (unsigned long)dentry; + get_dcookie(dentry, vfsmnt, &cookie); + return cookie; +} + +/* Look up the dcookie for the task's first VM_EXECUTABLE mapping, + * which corresponds loosely to "application name". Also, determine + * the offset for the SPU ELF object. If computed offset is + * non-zero, it implies an embedded SPU object; otherwise, it's a + * separate SPU binary, in which case we retrieve it's dcookie. + * For the embedded case, we must determine if SPU ELF is embedded + * in the executable application or another file (i.e., shared lib). + * If embedded in a shared lib, we must get the dcookie and return + * that to the caller. + */ +static unsigned long +get_exec_dcookie_and_offset(struct spu *spu, unsigned int *offsetp, + unsigned long *spu_bin_dcookie, + unsigned long spu_ref) +{ + unsigned long app_cookie = 0; + unsigned int my_offset = 0; + struct file *app = NULL; + struct vm_area_struct *vma; + struct mm_struct *mm = spu->mm; + + if (!mm) + goto out; + + down_read(&mm->mmap_sem); + + for (vma = mm->mmap; vma; vma = vma->vm_next) { + if (!vma->vm_file) + continue; + if (!(vma->vm_flags & VM_EXECUTABLE)) + continue; + app_cookie = fast_get_dcookie(vma->vm_file->f_dentry, + vma->vm_file->f_vfsmnt); + pr_debug("got dcookie for %s\n", + vma->vm_file->f_dentry->d_name.name); + app = vma->vm_file; + break; + } + + for (vma = mm->mmap; vma; vma = vma->vm_next) { + if (vma->vm_start > spu_ref || vma->vm_end <= spu_ref) + continue; + my_offset = spu_ref - vma->vm_start; + if (!vma->vm_file) + goto fail_no_image_cookie; + + pr_debug("Found spu ELF at %X(object-id:%lx) for file %s\n", + my_offset, spu_ref, + vma->vm_file->f_dentry->d_name.name); + *offsetp = my_offset; + break; + } + + *spu_bin_dcookie = fast_get_dcookie(vma->vm_file->f_dentry, + vma->vm_file->f_vfsmnt); + pr_debug("got dcookie for %s\n", vma->vm_file->f_dentry->d_name.name); + + up_read(&mm->mmap_sem); + +out: + return app_cookie; + +fail_no_image_cookie: + up_read(&mm->mmap_sem); + + printk(KERN_ERR "SPU_PROF: " + "%s, line %d: Cannot find dcookie for SPU binary\n", + __FUNCTION__, __LINE__); + goto out; +} + + + +/* This function finds or creates cached context information for the + * passed SPU and records SPU context information into the OProfile + * event buffer. + */ +static int process_context_switch(struct spu *spu, unsigned long objectId) +{ + unsigned long flags; + int retval; + unsigned int offset = 0; + unsigned long spu_cookie = 0, app_dcookie; + + retval = prepare_cached_spu_info(spu, objectId); + if (retval) + goto out; + + /* Get dcookie first because a mutex_lock is taken in that + * code path, so interrupts must not be disabled. + */ + app_dcookie = get_exec_dcookie_and_offset(spu, &offset, &spu_cookie, objectId); + if (!app_dcookie || !spu_cookie) { + retval = -ENOENT; + goto out; + } + + /* Record context info in event buffer */ + spin_lock_irqsave(&buffer_lock, flags); + add_event_entry(ESCAPE_CODE); + add_event_entry(SPU_CTX_SWITCH_CODE); + add_event_entry(spu->number); + add_event_entry(spu->pid); + add_event_entry(spu->tgid); + add_event_entry(app_dcookie); + add_event_entry(spu_cookie); + add_event_entry(offset); + spin_unlock_irqrestore(&buffer_lock, flags); + smp_wmb(); /* insure spu event buffer updates are written */ + /* don't want entries intermingled... */ +out: + return retval; +} + +/* + * This function is invoked on either a bind_context or unbind_context. + * If called for an unbind_context, the val arg is 0; otherwise, + * it is the object-id value for the spu context. + * The data arg is of type 'struct spu *'. + */ +static int spu_active_notify(struct notifier_block *self, unsigned long val, + void *data) +{ + int retval; + unsigned long flags; + struct spu *the_spu = data; + + pr_debug("SPU event notification arrived\n"); + if (!val) { + spin_lock_irqsave(&cache_lock, flags); + retval = release_cached_info(the_spu->number); + spin_unlock_irqrestore(&cache_lock, flags); + } else { + retval = process_context_switch(the_spu, val); + } + return retval; +} + +static struct notifier_block spu_active = { + .notifier_call = spu_active_notify, +}; + +static int number_of_online_nodes(void) +{ + u32 cpu; u32 tmp; + int nodes = 0; + for_each_online_cpu(cpu) { + tmp = cbe_cpu_to_node(cpu) + 1; + if (tmp > nodes) + nodes++; + } + return nodes; +} + +/* The main purpose of this function is to synchronize + * OProfile with SPUFS by registering to be notified of + * SPU task switches. + * + * NOTE: When profiling SPUs, we must ensure that only + * spu_sync_start is invoked and not the generic sync_start + * in drivers/oprofile/oprof.c. A return value of + * SKIP_GENERIC_SYNC or SYNC_START_ERROR will + * accomplish this. + */ +int spu_sync_start(void) +{ + int k; + int ret = SKIP_GENERIC_SYNC; + int register_ret; + unsigned long flags = 0; + + spu_prof_num_nodes = number_of_online_nodes(); + num_spu_nodes = spu_prof_num_nodes * 8; + + spin_lock_irqsave(&buffer_lock, flags); + add_event_entry(ESCAPE_CODE); + add_event_entry(SPU_PROFILING_CODE); + add_event_entry(num_spu_nodes); + spin_unlock_irqrestore(&buffer_lock, flags); + + /* Register for SPU events */ + register_ret = spu_switch_event_register(&spu_active); + if (register_ret) { + ret = SYNC_START_ERROR; + goto out; + } + + for (k = 0; k < (MAX_NUMNODES * 8); k++) + last_guard_val[k] = 0; + pr_debug("spu_sync_start -- running.\n"); +out: + return ret; +} + +/* Record SPU program counter samples to the oprofile event buffer. */ +void spu_sync_buffer(int spu_num, unsigned int *samples, + int num_samples) +{ + unsigned long long file_offset; + unsigned long flags; + int i; + struct vma_to_fileoffset_map *map; + struct spu *the_spu; + unsigned long long spu_num_ll = spu_num; + unsigned long long spu_num_shifted = spu_num_ll << 32; + struct cached_info *c_info; + + /* We need to obtain the cache_lock here because it's + * possible that after getting the cached_info, the SPU job + * corresponding to this cached_info may end, thus resulting + * in the destruction of the cached_info. + */ + spin_lock_irqsave(&cache_lock, flags); + c_info = get_cached_info(NULL, spu_num); + if (!c_info) { + /* This legitimately happens when the SPU task ends before all + * samples are recorded. + * No big deal -- so we just drop a few samples. + */ + pr_debug("SPU_PROF: No cached SPU contex " + "for SPU #%d. Dropping samples.\n", spu_num); + goto out; + } + + map = c_info->map; + the_spu = c_info->the_spu; + spin_lock(&buffer_lock); + for (i = 0; i < num_samples; i++) { + unsigned int sample = *(samples+i); + int grd_val = 0; + file_offset = 0; + if (sample == 0) + continue; + file_offset = vma_map_lookup( map, sample, the_spu, &grd_val); + + /* If overlays are used by this SPU application, the guard + * value is non-zero, indicating which overlay section is in + * use. We need to discard samples taken during the time + * period which an overlay occurs (i.e., guard value changes). + */ + if (grd_val && grd_val != last_guard_val[spu_num]) { + last_guard_val[spu_num] = grd_val; + /* Drop the rest of the samples. */ + break; + } + + add_event_entry(file_offset | spu_num_shifted); + } + spin_unlock(&buffer_lock); +out: + spin_unlock_irqrestore(&cache_lock, flags); +} + + +int spu_sync_stop(void) +{ + unsigned long flags = 0; + int ret = spu_switch_event_unregister(&spu_active); + if (ret) { + printk(KERN_ERR "SPU_PROF: " + "%s, line %d: spu_switch_event_unregister returned %d\n", + __FUNCTION__, __LINE__, ret); + goto out; + } + + spin_lock_irqsave(&cache_lock, flags); + ret = release_cached_info(RELEASE_ALL); + spin_unlock_irqrestore(&cache_lock, flags); +out: + pr_debug("spu_sync_stop -- done.\n"); + return ret; +} + + diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c new file mode 100644 index 000000000000..76ec1d16aef7 --- /dev/null +++ b/arch/powerpc/oprofile/cell/vma_map.c @@ -0,0 +1,287 @@ +/* + * Cell Broadband Engine OProfile Support + * + * (C) Copyright IBM Corporation 2006 + * + * Author: Maynard Johnson <maynardj@us.ibm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* The code in this source file is responsible for generating + * vma-to-fileOffset maps for both overlay and non-overlay SPU + * applications. + */ + +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/uaccess.h> +#include <linux/elf.h> +#include "pr_util.h" + + +void vma_map_free(struct vma_to_fileoffset_map *map) +{ + while (map) { + struct vma_to_fileoffset_map *next = map->next; + kfree(map); + map = next; + } +} + +unsigned int +vma_map_lookup(struct vma_to_fileoffset_map *map, unsigned int vma, + const struct spu *aSpu, int *grd_val) +{ + /* + * Default the offset to the physical address + a flag value. + * Addresses of dynamically generated code can't be found in the vma + * map. For those addresses the flagged value will be sent on to + * the user space tools so they can be reported rather than just + * thrown away. + */ + u32 offset = 0x10000000 + vma; + u32 ovly_grd; + + for (; map; map = map->next) { + if (vma < map->vma || vma >= map->vma + map->size) + continue; + + if (map->guard_ptr) { + ovly_grd = *(u32 *)(aSpu->local_store + map->guard_ptr); + if (ovly_grd != map->guard_val) + continue; + *grd_val = ovly_grd; + } + offset = vma - map->vma + map->offset; + break; + } + + return offset; +} + +static struct vma_to_fileoffset_map * +vma_map_add(struct vma_to_fileoffset_map *map, unsigned int vma, + unsigned int size, unsigned int offset, unsigned int guard_ptr, + unsigned int guard_val) +{ + struct vma_to_fileoffset_map *new = + kzalloc(sizeof(struct vma_to_fileoffset_map), GFP_KERNEL); + if (!new) { + printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n", + __FUNCTION__, __LINE__); + vma_map_free(map); + return NULL; + } + + new->next = map; + new->vma = vma; + new->size = size; + new->offset = offset; + new->guard_ptr = guard_ptr; + new->guard_val = guard_val; + + return new; +} + + +/* Parse SPE ELF header and generate a list of vma_maps. + * A pointer to the first vma_map in the generated list + * of vma_maps is returned. */ +struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, + unsigned long spu_elf_start) +{ + static const unsigned char expected[EI_PAD] = { + [EI_MAG0] = ELFMAG0, + [EI_MAG1] = ELFMAG1, + [EI_MAG2] = ELFMAG2, + [EI_MAG3] = ELFMAG3, + [EI_CLASS] = ELFCLASS32, + [EI_DATA] = ELFDATA2MSB, + [EI_VERSION] = EV_CURRENT, + [EI_OSABI] = ELFOSABI_NONE + }; + + int grd_val; + struct vma_to_fileoffset_map *map = NULL; + struct spu_overlay_info ovly; + unsigned int overlay_tbl_offset = -1; + unsigned long phdr_start, shdr_start; + Elf32_Ehdr ehdr; + Elf32_Phdr phdr; + Elf32_Shdr shdr, shdr_str; + Elf32_Sym sym; + int i, j; + char name[32]; + + unsigned int ovly_table_sym = 0; + unsigned int ovly_buf_table_sym = 0; + unsigned int ovly_table_end_sym = 0; + unsigned int ovly_buf_table_end_sym = 0; + unsigned long ovly_table; + unsigned int n_ovlys; + + /* Get and validate ELF header. */ + + if (copy_from_user(&ehdr, (void *) spu_elf_start, sizeof (ehdr))) + goto fail; + + if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) { + printk(KERN_ERR "SPU_PROF: " + "%s, line %d: Unexpected e_ident parsing SPU ELF\n", + __FUNCTION__, __LINE__); + goto fail; + } + if (ehdr.e_machine != EM_SPU) { + printk(KERN_ERR "SPU_PROF: " + "%s, line %d: Unexpected e_machine parsing SPU ELF\n", + __FUNCTION__, __LINE__); + goto fail; + } + if (ehdr.e_type != ET_EXEC) { + printk(KERN_ERR "SPU_PROF: " + "%s, line %d: Unexpected e_type parsing SPU ELF\n", + __FUNCTION__, __LINE__); + goto fail; + } + phdr_start = spu_elf_start + ehdr.e_phoff; + shdr_start = spu_elf_start + ehdr.e_shoff; + + /* Traverse program headers. */ + for (i = 0; i < ehdr.e_phnum; i++) { + if (copy_from_user(&phdr, + (void *) (phdr_start + i * sizeof(phdr)), + sizeof(phdr))) + goto fail; + + if (phdr.p_type != PT_LOAD) + continue; + if (phdr.p_flags & (1 << 27)) + continue; + + map = vma_map_add(map, phdr.p_vaddr, phdr.p_memsz, + phdr.p_offset, 0, 0); + if (!map) + goto fail; + } + + pr_debug("SPU_PROF: Created non-overlay maps\n"); + /* Traverse section table and search for overlay-related symbols. */ + for (i = 0; i < ehdr.e_shnum; i++) { + if (copy_from_user(&shdr, + (void *) (shdr_start + i * sizeof(shdr)), + sizeof(shdr))) + goto fail; + + if (shdr.sh_type != SHT_SYMTAB) + continue; + if (shdr.sh_entsize != sizeof (sym)) + continue; + + if (copy_from_user(&shdr_str, + (void *) (shdr_start + shdr.sh_link * + sizeof(shdr)), + sizeof(shdr))) + goto fail; + + if (shdr_str.sh_type != SHT_STRTAB) + goto fail;; + + for (j = 0; j < shdr.sh_size / sizeof (sym); j++) { + if (copy_from_user(&sym, (void *) (spu_elf_start + + shdr.sh_offset + j * + sizeof (sym)), + sizeof (sym))) + goto fail; + + if (copy_from_user(name, (void *) + (spu_elf_start + shdr_str.sh_offset + + sym.st_name), + 20)) + goto fail; + + if (memcmp(name, "_ovly_table", 12) == 0) + ovly_table_sym = sym.st_value; + if (memcmp(name, "_ovly_buf_table", 16) == 0) + ovly_buf_table_sym = sym.st_value; + if (memcmp(name, "_ovly_table_end", 16) == 0) + ovly_table_end_sym = sym.st_value; + if (memcmp(name, "_ovly_buf_table_end", 20) == 0) + ovly_buf_table_end_sym = sym.st_value; + } + } + + /* If we don't have overlays, we're done. */ + if (ovly_table_sym == 0 || ovly_buf_table_sym == 0 + || ovly_table_end_sym == 0 || ovly_buf_table_end_sym == 0) { + pr_debug("SPU_PROF: No overlay table found\n"); + goto out; + } else { + pr_debug("SPU_PROF: Overlay table found\n"); + } + + /* The _ovly_table symbol represents a table with one entry + * per overlay section. The _ovly_buf_table symbol represents + * a table with one entry per overlay region. + * The struct spu_overlay_info gives the structure of the _ovly_table + * entries. The structure of _ovly_table_buf is simply one + * u32 word per entry. + */ + overlay_tbl_offset = vma_map_lookup(map, ovly_table_sym, + aSpu, &grd_val); + if (overlay_tbl_offset < 0) { + printk(KERN_ERR "SPU_PROF: " + "%s, line %d: Error finding SPU overlay table\n", + __FUNCTION__, __LINE__); + goto fail; + } + ovly_table = spu_elf_start + overlay_tbl_offset; + + n_ovlys = (ovly_table_end_sym - + ovly_table_sym) / sizeof (ovly); + + /* Traverse overlay table. */ + for (i = 0; i < n_ovlys; i++) { + if (copy_from_user(&ovly, (void *) + (ovly_table + i * sizeof (ovly)), + sizeof (ovly))) + goto fail; + + /* The ovly.vma/size/offset arguments are analogous to the same + * arguments used above for non-overlay maps. The final two + * args are referred to as the guard pointer and the guard + * value. + * The guard pointer is an entry in the _ovly_buf_table, + * computed using ovly.buf as the index into the table. Since + * ovly.buf values begin at '1' to reference the first (or 0th) + * entry in the _ovly_buf_table, the computation subtracts 1 + * from ovly.buf. + * The guard value is stored in the _ovly_buf_table entry and + * is an index (starting at 1) back to the _ovly_table entry + * that is pointing at this _ovly_buf_table entry. So, for + * example, for an overlay scenario with one overlay segment + * and two overlay sections: + * - Section 1 points to the first entry of the + * _ovly_buf_table, which contains a guard value + * of '1', referencing the first (index=0) entry of + * _ovly_table. + * - Section 2 points to the second entry of the + * _ovly_buf_table, which contains a guard value + * of '2', referencing the second (index=1) entry of + * _ovly_table. + */ + map = vma_map_add(map, ovly.vma, ovly.size, ovly.offset, + ovly_buf_table_sym + (ovly.buf-1) * 4, i+1); + if (!map) + goto fail; + } + goto out; + + fail: + map = NULL; + out: + return map; +} diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index 1a7ef7e246d2..a28cce1d6c24 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -29,6 +29,8 @@ static struct op_powerpc_model *model; static struct op_counter_config ctr[OP_MAX_COUNTER]; static struct op_system_config sys; +static int op_per_cpu_rc; + static void op_handle_interrupt(struct pt_regs *regs) { model->handle_interrupt(regs, ctr); @@ -36,25 +38,41 @@ static void op_handle_interrupt(struct pt_regs *regs) static void op_powerpc_cpu_setup(void *dummy) { - model->cpu_setup(ctr); + int ret; + + ret = model->cpu_setup(ctr); + + if (ret != 0) + op_per_cpu_rc = ret; } static int op_powerpc_setup(void) { int err; + op_per_cpu_rc = 0; + /* Grab the hardware */ err = reserve_pmc_hardware(op_handle_interrupt); if (err) return err; /* Pre-compute the values to stuff in the hardware registers. */ - model->reg_setup(ctr, &sys, model->num_counters); + op_per_cpu_rc = model->reg_setup(ctr, &sys, model->num_counters); - /* Configure the registers on all cpus. */ + if (op_per_cpu_rc) + goto out; + + /* Configure the registers on all cpus. If an error occurs on one + * of the cpus, op_per_cpu_rc will be set to the error */ on_each_cpu(op_powerpc_cpu_setup, NULL, 0, 1); - return 0; +out: if (op_per_cpu_rc) { + /* error on setup release the performance counter hardware */ + release_pmc_hardware(); + } + + return op_per_cpu_rc; } static void op_powerpc_shutdown(void) @@ -64,16 +82,29 @@ static void op_powerpc_shutdown(void) static void op_powerpc_cpu_start(void *dummy) { - model->start(ctr); + /* If any of the cpus have return an error, set the + * global flag to the error so it can be returned + * to the generic OProfile caller. + */ + int ret; + + ret = model->start(ctr); + if (ret != 0) + op_per_cpu_rc = ret; } static int op_powerpc_start(void) { + op_per_cpu_rc = 0; + if (model->global_start) - model->global_start(ctr); - if (model->start) + return model->global_start(ctr); + if (model->start) { on_each_cpu(op_powerpc_cpu_start, NULL, 0, 1); - return 0; + return op_per_cpu_rc; + } + return -EIO; /* No start function is defined for this + power architecture */ } static inline void op_powerpc_cpu_stop(void *dummy) @@ -147,11 +178,13 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) switch (cur_cpu_spec->oprofile_type) { #ifdef CONFIG_PPC64 -#ifdef CONFIG_PPC_CELL_NATIVE +#ifdef CONFIG_OPROFILE_CELL case PPC_OPROFILE_CELL: if (firmware_has_feature(FW_FEATURE_LPAR)) return -ENODEV; model = &op_model_cell; + ops->sync_start = model->sync_start; + ops->sync_stop = model->sync_stop; break; #endif case PPC_OPROFILE_RS64: diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c index 5d1bbaf35ccb..cc599eb8768b 100644 --- a/arch/powerpc/oprofile/op_model_7450.c +++ b/arch/powerpc/oprofile/op_model_7450.c @@ -81,7 +81,7 @@ static void pmc_stop_ctrs(void) /* Configures the counters on this CPU based on the global * settings */ -static void fsl7450_cpu_setup(struct op_counter_config *ctr) +static int fsl7450_cpu_setup(struct op_counter_config *ctr) { /* freeze all counters */ pmc_stop_ctrs(); @@ -89,12 +89,14 @@ static void fsl7450_cpu_setup(struct op_counter_config *ctr) mtspr(SPRN_MMCR0, mmcr0_val); mtspr(SPRN_MMCR1, mmcr1_val); mtspr(SPRN_MMCR2, mmcr2_val); + + return 0; } #define NUM_CTRS 6 /* Configures the global settings for the countes on all CPUs. */ -static void fsl7450_reg_setup(struct op_counter_config *ctr, +static int fsl7450_reg_setup(struct op_counter_config *ctr, struct op_system_config *sys, int num_ctrs) { @@ -126,10 +128,12 @@ static void fsl7450_reg_setup(struct op_counter_config *ctr, | mmcr1_event6(ctr[5].event); mmcr2_val = 0; + + return 0; } /* Sets the counters on this CPU to the chosen values, and starts them */ -static void fsl7450_start(struct op_counter_config *ctr) +static int fsl7450_start(struct op_counter_config *ctr) { int i; @@ -148,6 +152,8 @@ static void fsl7450_start(struct op_counter_config *ctr) pmc_start_ctrs(); oprofile_running = 1; + + return 0; } /* Stop the counters on this CPU */ @@ -193,7 +199,7 @@ static void fsl7450_handle_interrupt(struct pt_regs *regs, /* The freeze bit was set by the interrupt. */ /* Clear the freeze bit, and reenable the interrupt. * The counters won't actually start until the rfi clears - * the PMM bit */ + * the PM/M bit */ pmc_start_ctrs(); } diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index c29293befba9..d928b54f3a0f 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -5,8 +5,8 @@ * * Author: David Erb (djerb@us.ibm.com) * Modifications: - * Carl Love <carll@us.ibm.com> - * Maynard Johnson <maynardj@us.ibm.com> + * Carl Love <carll@us.ibm.com> + * Maynard Johnson <maynardj@us.ibm.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -38,12 +38,25 @@ #include "../platforms/cell/interrupt.h" #include "../platforms/cell/cbe_regs.h" +#include "cell/pr_util.h" + +static void cell_global_stop_spu(void); + +/* + * spu_cycle_reset is the number of cycles between samples. + * This variable is used for SPU profiling and should ONLY be set + * at the beginning of cell_reg_setup; otherwise, it's read-only. + */ +static unsigned int spu_cycle_reset; + +#define NUM_SPUS_PER_NODE 8 +#define SPU_CYCLES_EVENT_NUM 2 /* event number for SPU_CYCLES */ #define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */ -#define PPU_CYCLES_GRP_NUM 1 /* special group number for identifying - * PPU_CYCLES event - */ -#define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */ +#define PPU_CYCLES_GRP_NUM 1 /* special group number for identifying + * PPU_CYCLES event + */ +#define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */ #define NUM_THREADS 2 /* number of physical threads in * physical processor @@ -51,6 +64,7 @@ #define NUM_TRACE_BUS_WORDS 4 #define NUM_INPUT_BUS_WORDS 2 +#define MAX_SPU_COUNT 0xFFFFFF /* maximum 24 bit LFSR value */ struct pmc_cntrl_data { unsigned long vcntr; @@ -62,11 +76,10 @@ struct pmc_cntrl_data { /* * ibm,cbe-perftools rtas parameters */ - struct pm_signal { u16 cpu; /* Processor to modify */ - u16 sub_unit; /* hw subunit this applies to (if applicable) */ - short int signal_group; /* Signal Group to Enable/Disable */ + u16 sub_unit; /* hw subunit this applies to (if applicable)*/ + short int signal_group; /* Signal Group to Enable/Disable */ u8 bus_word; /* Enable/Disable on this Trace/Trigger/Event * Bus Word(s) (bitmask) */ @@ -112,21 +125,42 @@ static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values); static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS]; -/* Interpetation of hdw_thread: +/* + * The CELL profiling code makes rtas calls to setup the debug bus to + * route the performance signals. Additionally, SPU profiling requires + * a second rtas call to setup the hardware to capture the SPU PCs. + * The EIO error value is returned if the token lookups or the rtas + * call fail. The EIO error number is the best choice of the existing + * error numbers. The probability of rtas related error is very low. But + * by returning EIO and printing additional information to dmsg the user + * will know that OProfile did not start and dmesg will tell them why. + * OProfile does not support returning errors on Stop. Not a huge issue + * since failure to reset the debug bus or stop the SPU PC collection is + * not a fatel issue. Chances are if the Stop failed, Start doesn't work + * either. + */ + +/* + * Interpetation of hdw_thread: * 0 - even virtual cpus 0, 2, 4,... * 1 - odd virtual cpus 1, 3, 5, ... + * + * FIXME: this is strictly wrong, we need to clean this up in a number + * of places. It works for now. -arnd */ static u32 hdw_thread; static u32 virt_cntr_inter_mask; static struct timer_list timer_virt_cntr; -/* pm_signal needs to be global since it is initialized in +/* + * pm_signal needs to be global since it is initialized in * cell_reg_setup at the time when the necessary information * is available. */ static struct pm_signal pm_signal[NR_PHYS_CTRS]; -static int pm_rtas_token; +static int pm_rtas_token; /* token for debug bus setup call */ +static int spu_rtas_token; /* token for SPU cycle profiling */ static u32 reset_value[NR_PHYS_CTRS]; static int num_counters; @@ -147,8 +181,8 @@ rtas_ibm_cbe_perftools(int subfunc, int passthru, { u64 paddr = __pa(address); - return rtas_call(pm_rtas_token, 5, 1, NULL, subfunc, passthru, - paddr >> 32, paddr & 0xffffffff, length); + return rtas_call(pm_rtas_token, 5, 1, NULL, subfunc, + passthru, paddr >> 32, paddr & 0xffffffff, length); } static void pm_rtas_reset_signals(u32 node) @@ -156,12 +190,13 @@ static void pm_rtas_reset_signals(u32 node) int ret; struct pm_signal pm_signal_local; - /* The debug bus is being set to the passthru disable state. - * However, the FW still expects atleast one legal signal routing - * entry or it will return an error on the arguments. If we don't - * supply a valid entry, we must ignore all return values. Ignoring - * all return values means we might miss an error we should be - * concerned about. + /* + * The debug bus is being set to the passthru disable state. + * However, the FW still expects atleast one legal signal routing + * entry or it will return an error on the arguments. If we don't + * supply a valid entry, we must ignore all return values. Ignoring + * all return values means we might miss an error we should be + * concerned about. */ /* fw expects physical cpu #. */ @@ -175,18 +210,24 @@ static void pm_rtas_reset_signals(u32 node) &pm_signal_local, sizeof(struct pm_signal)); - if (ret) + if (unlikely(ret)) + /* + * Not a fatal error. For Oprofile stop, the oprofile + * functions do not support returning an error for + * failure to stop OProfile. + */ printk(KERN_WARNING "%s: rtas returned: %d\n", __FUNCTION__, ret); } -static void pm_rtas_activate_signals(u32 node, u32 count) +static int pm_rtas_activate_signals(u32 node, u32 count) { int ret; int i, j; struct pm_signal pm_signal_local[NR_PHYS_CTRS]; - /* There is no debug setup required for the cycles event. + /* + * There is no debug setup required for the cycles event. * Note that only events in the same group can be used. * Otherwise, there will be conflicts in correctly routing * the signals on the debug bus. It is the responsiblity @@ -213,10 +254,14 @@ static void pm_rtas_activate_signals(u32 node, u32 count) pm_signal_local, i * sizeof(struct pm_signal)); - if (ret) + if (unlikely(ret)) { printk(KERN_WARNING "%s: rtas returned: %d\n", __FUNCTION__, ret); + return -EIO; + } } + + return 0; } /* @@ -260,11 +305,12 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(polarity); pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_CONTROL(input_control); - /* Some of the islands signal selection is based on 64 bit words. + /* + * Some of the islands signal selection is based on 64 bit words. * The debug bus words are 32 bits, the input words to the performance * counters are defined as 32 bits. Need to convert the 64 bit island * specification to the appropriate 32 input bit and bus word for the - * performance counter event selection. See the CELL Performance + * performance counter event selection. See the CELL Performance * monitoring signals manual and the Perf cntr hardware descriptions * for the details. */ @@ -298,6 +344,7 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) input_bus[j] = i; pm_regs.group_control |= (i << (31 - i)); + break; } } @@ -309,7 +356,8 @@ out: static void write_pm_cntrl(int cpu) { - /* Oprofile will use 32 bit counters, set bits 7:10 to 0 + /* + * Oprofile will use 32 bit counters, set bits 7:10 to 0 * pmregs.pm_cntrl is a global */ @@ -326,7 +374,8 @@ static void write_pm_cntrl(int cpu) if (pm_regs.pm_cntrl.freeze == 1) val |= CBE_PM_FREEZE_ALL_CTRS; - /* Routine set_count_mode must be called previously to set + /* + * Routine set_count_mode must be called previously to set * the count mode based on the user selection of user and kernel. */ val |= CBE_PM_COUNT_MODE_SET(pm_regs.pm_cntrl.count_mode); @@ -336,7 +385,8 @@ static void write_pm_cntrl(int cpu) static inline void set_count_mode(u32 kernel, u32 user) { - /* The user must specify user and kernel if they want them. If + /* + * The user must specify user and kernel if they want them. If * neither is specified, OProfile will count in hypervisor mode. * pm_regs.pm_cntrl is a global */ @@ -364,7 +414,7 @@ static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl) /* * Oprofile is expected to collect data on all CPUs simultaneously. - * However, there is one set of performance counters per node. There are + * However, there is one set of performance counters per node. There are * two hardware threads or virtual CPUs on each node. Hence, OProfile must * multiplex in time the performance counter collection on the two virtual * CPUs. The multiplexing of the performance counters is done by this @@ -377,19 +427,19 @@ static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl) * pair of per-cpu arrays is used for storing the previous and next * pmc values for a given node. * NOTE: We use the per-cpu variable to improve cache performance. + * + * This routine will alternate loading the virtual counters for + * virtual CPUs */ static void cell_virtual_cntr(unsigned long data) { - /* This routine will alternate loading the virtual counters for - * virtual CPUs - */ int i, prev_hdw_thread, next_hdw_thread; u32 cpu; unsigned long flags; - /* Make sure that the interrupt_hander and - * the virt counter are not both playing with - * the counters on the same node. + /* + * Make sure that the interrupt_hander and the virt counter are + * not both playing with the counters on the same node. */ spin_lock_irqsave(&virt_cntr_lock, flags); @@ -400,22 +450,25 @@ static void cell_virtual_cntr(unsigned long data) hdw_thread = 1 ^ hdw_thread; next_hdw_thread = hdw_thread; - for (i = 0; i < num_counters; i++) - /* There are some per thread events. Must do the + /* + * There are some per thread events. Must do the * set event, for the thread that is being started */ + for (i = 0; i < num_counters; i++) set_pm_event(i, pmc_cntrl[next_hdw_thread][i].evnts, pmc_cntrl[next_hdw_thread][i].masks); - /* The following is done only once per each node, but + /* + * The following is done only once per each node, but * we need cpu #, not node #, to pass to the cbe_xxx functions. */ for_each_online_cpu(cpu) { if (cbe_get_hw_thread_id(cpu)) continue; - /* stop counters, save counter values, restore counts + /* + * stop counters, save counter values, restore counts * for previous thread */ cbe_disable_pm(cpu); @@ -428,7 +481,7 @@ static void cell_virtual_cntr(unsigned long data) == 0xFFFFFFFF) /* If the cntr value is 0xffffffff, we must * reset that to 0xfffffff0 when the current - * thread is restarted. This will generate a + * thread is restarted. This will generate a * new interrupt and make sure that we never * restore the counters to the max value. If * the counters were restored to the max value, @@ -444,13 +497,15 @@ static void cell_virtual_cntr(unsigned long data) next_hdw_thread)[i]); } - /* Switch to the other thread. Change the interrupt + /* + * Switch to the other thread. Change the interrupt * and control regs to be scheduled on the CPU * corresponding to the thread to execute. */ for (i = 0; i < num_counters; i++) { if (pmc_cntrl[next_hdw_thread][i].enabled) { - /* There are some per thread events. + /* + * There are some per thread events. * Must do the set event, enable_cntr * for each cpu. */ @@ -482,17 +537,42 @@ static void start_virt_cntrs(void) } /* This function is called once for all cpus combined */ -static void -cell_reg_setup(struct op_counter_config *ctr, - struct op_system_config *sys, int num_ctrs) +static int cell_reg_setup(struct op_counter_config *ctr, + struct op_system_config *sys, int num_ctrs) { int i, j, cpu; + spu_cycle_reset = 0; + + if (ctr[0].event == SPU_CYCLES_EVENT_NUM) { + spu_cycle_reset = ctr[0].count; + + /* + * Each node will need to make the rtas call to start + * and stop SPU profiling. Get the token once and store it. + */ + spu_rtas_token = rtas_token("ibm,cbe-spu-perftools"); + + if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) { + printk(KERN_ERR + "%s: rtas token ibm,cbe-spu-perftools unknown\n", + __FUNCTION__); + return -EIO; + } + } pm_rtas_token = rtas_token("ibm,cbe-perftools"); - if (pm_rtas_token == RTAS_UNKNOWN_SERVICE) { - printk(KERN_WARNING "%s: RTAS_UNKNOWN_SERVICE\n", + + /* + * For all events excetp PPU CYCLEs, each node will need to make + * the rtas cbe-perftools call to setup and reset the debug bus. + * Make the token lookup call once and store it in the global + * variable pm_rtas_token. + */ + if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) { + printk(KERN_ERR + "%s: rtas token ibm,cbe-perftools unknown\n", __FUNCTION__); - goto out; + return -EIO; } num_counters = num_ctrs; @@ -520,7 +600,8 @@ cell_reg_setup(struct op_counter_config *ctr, per_cpu(pmc_values, j)[i] = 0; } - /* Setup the thread 1 events, map the thread 0 event to the + /* + * Setup the thread 1 events, map the thread 0 event to the * equivalent thread 1 event. */ for (i = 0; i < num_ctrs; ++i) { @@ -544,9 +625,10 @@ cell_reg_setup(struct op_counter_config *ctr, for (i = 0; i < NUM_INPUT_BUS_WORDS; i++) input_bus[i] = 0xff; - /* Our counters count up, and "count" refers to + /* + * Our counters count up, and "count" refers to * how much before the next interrupt, and we interrupt - * on overflow. So we calculate the starting value + * on overflow. So we calculate the starting value * which will give us "count" until overflow. * Then we set the events on the enabled counters. */ @@ -569,28 +651,27 @@ cell_reg_setup(struct op_counter_config *ctr, for (i = 0; i < num_counters; ++i) { per_cpu(pmc_values, cpu)[i] = reset_value[i]; } -out: - ; + + return 0; } + + /* This function is called once for each cpu */ -static void cell_cpu_setup(struct op_counter_config *cntr) +static int cell_cpu_setup(struct op_counter_config *cntr) { u32 cpu = smp_processor_id(); u32 num_enabled = 0; int i; + if (spu_cycle_reset) + return 0; + /* There is one performance monitor per processor chip (i.e. node), * so we only need to perform this function once per node. */ if (cbe_get_hw_thread_id(cpu)) - goto out; - - if (pm_rtas_token == RTAS_UNKNOWN_SERVICE) { - printk(KERN_WARNING "%s: RTAS_UNKNOWN_SERVICE\n", - __FUNCTION__); - goto out; - } + return 0; /* Stop all counters */ cbe_disable_pm(cpu); @@ -609,16 +690,286 @@ static void cell_cpu_setup(struct op_counter_config *cntr) } } - pm_rtas_activate_signals(cbe_cpu_to_node(cpu), num_enabled); + /* + * The pm_rtas_activate_signals will return -EIO if the FW + * call failed. + */ + return pm_rtas_activate_signals(cbe_cpu_to_node(cpu), num_enabled); +} + +#define ENTRIES 303 +#define MAXLFSR 0xFFFFFF + +/* precomputed table of 24 bit LFSR values */ +static int initial_lfsr[] = { + 8221349, 12579195, 5379618, 10097839, 7512963, 7519310, 3955098, 10753424, + 15507573, 7458917, 285419, 2641121, 9780088, 3915503, 6668768, 1548716, + 4885000, 8774424, 9650099, 2044357, 2304411, 9326253, 10332526, 4421547, + 3440748, 10179459, 13332843, 10375561, 1313462, 8375100, 5198480, 6071392, + 9341783, 1526887, 3985002, 1439429, 13923762, 7010104, 11969769, 4547026, + 2040072, 4025602, 3437678, 7939992, 11444177, 4496094, 9803157, 10745556, + 3671780, 4257846, 5662259, 13196905, 3237343, 12077182, 16222879, 7587769, + 14706824, 2184640, 12591135, 10420257, 7406075, 3648978, 11042541, 15906893, + 11914928, 4732944, 10695697, 12928164, 11980531, 4430912, 11939291, 2917017, + 6119256, 4172004, 9373765, 8410071, 14788383, 5047459, 5474428, 1737756, + 15967514, 13351758, 6691285, 8034329, 2856544, 14394753, 11310160, 12149558, + 7487528, 7542781, 15668898, 12525138, 12790975, 3707933, 9106617, 1965401, + 16219109, 12801644, 2443203, 4909502, 8762329, 3120803, 6360315, 9309720, + 15164599, 10844842, 4456529, 6667610, 14924259, 884312, 6234963, 3326042, + 15973422, 13919464, 5272099, 6414643, 3909029, 2764324, 5237926, 4774955, + 10445906, 4955302, 5203726, 10798229, 11443419, 2303395, 333836, 9646934, + 3464726, 4159182, 568492, 995747, 10318756, 13299332, 4836017, 8237783, + 3878992, 2581665, 11394667, 5672745, 14412947, 3159169, 9094251, 16467278, + 8671392, 15230076, 4843545, 7009238, 15504095, 1494895, 9627886, 14485051, + 8304291, 252817, 12421642, 16085736, 4774072, 2456177, 4160695, 15409741, + 4902868, 5793091, 13162925, 16039714, 782255, 11347835, 14884586, 366972, + 16308990, 11913488, 13390465, 2958444, 10340278, 1177858, 1319431, 10426302, + 2868597, 126119, 5784857, 5245324, 10903900, 16436004, 3389013, 1742384, + 14674502, 10279218, 8536112, 10364279, 6877778, 14051163, 1025130, 6072469, + 1988305, 8354440, 8216060, 16342977, 13112639, 3976679, 5913576, 8816697, + 6879995, 14043764, 3339515, 9364420, 15808858, 12261651, 2141560, 5636398, + 10345425, 10414756, 781725, 6155650, 4746914, 5078683, 7469001, 6799140, + 10156444, 9667150, 10116470, 4133858, 2121972, 1124204, 1003577, 1611214, + 14304602, 16221850, 13878465, 13577744, 3629235, 8772583, 10881308, 2410386, + 7300044, 5378855, 9301235, 12755149, 4977682, 8083074, 10327581, 6395087, + 9155434, 15501696, 7514362, 14520507, 15808945, 3244584, 4741962, 9658130, + 14336147, 8654727, 7969093, 15759799, 14029445, 5038459, 9894848, 8659300, + 13699287, 8834306, 10712885, 14753895, 10410465, 3373251, 309501, 9561475, + 5526688, 14647426, 14209836, 5339224, 207299, 14069911, 8722990, 2290950, + 3258216, 12505185, 6007317, 9218111, 14661019, 10537428, 11731949, 9027003, + 6641507, 9490160, 200241, 9720425, 16277895, 10816638, 1554761, 10431375, + 7467528, 6790302, 3429078, 14633753, 14428997, 11463204, 3576212, 2003426, + 6123687, 820520, 9992513, 15784513, 5778891, 6428165, 8388607 +}; + +/* + * The hardware uses an LFSR counting sequence to determine when to capture + * the SPU PCs. An LFSR sequence is like a puesdo random number sequence + * where each number occurs once in the sequence but the sequence is not in + * numerical order. The SPU PC capture is done when the LFSR sequence reaches + * the last value in the sequence. Hence the user specified value N + * corresponds to the LFSR number that is N from the end of the sequence. + * + * To avoid the time to compute the LFSR, a lookup table is used. The 24 bit + * LFSR sequence is broken into four ranges. The spacing of the precomputed + * values is adjusted in each range so the error between the user specifed + * number (N) of events between samples and the actual number of events based + * on the precomputed value will be les then about 6.2%. Note, if the user + * specifies N < 2^16, the LFSR value that is 2^16 from the end will be used. + * This is to prevent the loss of samples because the trace buffer is full. + * + * User specified N Step between Index in + * precomputed values precomputed + * table + * 0 to 2^16-1 ---- 0 + * 2^16 to 2^16+2^19-1 2^12 1 to 128 + * 2^16+2^19 to 2^16+2^19+2^22-1 2^15 129 to 256 + * 2^16+2^19+2^22 to 2^24-1 2^18 257 to 302 + * + * + * For example, the LFSR values in the second range are computed for 2^16, + * 2^16+2^12, ... , 2^19-2^16, 2^19 and stored in the table at indicies + * 1, 2,..., 127, 128. + * + * The 24 bit LFSR value for the nth number in the sequence can be + * calculated using the following code: + * + * #define size 24 + * int calculate_lfsr(int n) + * { + * int i; + * unsigned int newlfsr0; + * unsigned int lfsr = 0xFFFFFF; + * unsigned int howmany = n; + * + * for (i = 2; i < howmany + 2; i++) { + * newlfsr0 = (((lfsr >> (size - 1 - 0)) & 1) ^ + * ((lfsr >> (size - 1 - 1)) & 1) ^ + * (((lfsr >> (size - 1 - 6)) & 1) ^ + * ((lfsr >> (size - 1 - 23)) & 1))); + * + * lfsr >>= 1; + * lfsr = lfsr | (newlfsr0 << (size - 1)); + * } + * return lfsr; + * } + */ + +#define V2_16 (0x1 << 16) +#define V2_19 (0x1 << 19) +#define V2_22 (0x1 << 22) + +static int calculate_lfsr(int n) +{ + /* + * The ranges and steps are in powers of 2 so the calculations + * can be done using shifts rather then divide. + */ + int index; + + if ((n >> 16) == 0) + index = 0; + else if (((n - V2_16) >> 19) == 0) + index = ((n - V2_16) >> 12) + 1; + else if (((n - V2_16 - V2_19) >> 22) == 0) + index = ((n - V2_16 - V2_19) >> 15 ) + 1 + 128; + else if (((n - V2_16 - V2_19 - V2_22) >> 24) == 0) + index = ((n - V2_16 - V2_19 - V2_22) >> 18 ) + 1 + 256; + else + index = ENTRIES-1; + + /* make sure index is valid */ + if ((index > ENTRIES) || (index < 0)) + index = ENTRIES-1; + + return initial_lfsr[index]; +} + +static int pm_rtas_activate_spu_profiling(u32 node) +{ + int ret, i; + struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + + /* + * Set up the rtas call to configure the debug bus to + * route the SPU PCs. Setup the pm_signal for each SPU + */ + for (i = 0; i < NUM_SPUS_PER_NODE; i++) { + pm_signal_local[i].cpu = node; + pm_signal_local[i].signal_group = 41; + /* spu i on word (i/2) */ + pm_signal_local[i].bus_word = 1 << i / 2; + /* spu i */ + pm_signal_local[i].sub_unit = i; + pm_signal_local[i].bit = 63; + } + + ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, + PASSTHRU_ENABLE, pm_signal_local, + (NUM_SPUS_PER_NODE + * sizeof(struct pm_signal))); + + if (unlikely(ret)) { + printk(KERN_WARNING "%s: rtas returned: %d\n", + __FUNCTION__, ret); + return -EIO; + } + + return 0; +} + +#ifdef CONFIG_CPU_FREQ +static int +oprof_cpufreq_notify(struct notifier_block *nb, unsigned long val, void *data) +{ + int ret = 0; + struct cpufreq_freqs *frq = data; + if ((val == CPUFREQ_PRECHANGE && frq->old < frq->new) || + (val == CPUFREQ_POSTCHANGE && frq->old > frq->new) || + (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) + set_spu_profiling_frequency(frq->new, spu_cycle_reset); + return ret; +} + +static struct notifier_block cpu_freq_notifier_block = { + .notifier_call = oprof_cpufreq_notify +}; +#endif + +static int cell_global_start_spu(struct op_counter_config *ctr) +{ + int subfunc; + unsigned int lfsr_value; + int cpu; + int ret; + int rtas_error; + unsigned int cpu_khzfreq = 0; + + /* The SPU profiling uses time-based profiling based on + * cpu frequency, so if configured with the CPU_FREQ + * option, we should detect frequency changes and react + * accordingly. + */ +#ifdef CONFIG_CPU_FREQ + ret = cpufreq_register_notifier(&cpu_freq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + if (ret < 0) + /* this is not a fatal error */ + printk(KERN_ERR "CPU freq change registration failed: %d\n", + ret); + + else + cpu_khzfreq = cpufreq_quick_get(smp_processor_id()); +#endif + + set_spu_profiling_frequency(cpu_khzfreq, spu_cycle_reset); + + for_each_online_cpu(cpu) { + if (cbe_get_hw_thread_id(cpu)) + continue; + + /* + * Setup SPU cycle-based profiling. + * Set perf_mon_control bit 0 to a zero before + * enabling spu collection hardware. + */ + cbe_write_pm(cpu, pm_control, 0); + + if (spu_cycle_reset > MAX_SPU_COUNT) + /* use largest possible value */ + lfsr_value = calculate_lfsr(MAX_SPU_COUNT-1); + else + lfsr_value = calculate_lfsr(spu_cycle_reset); + + /* must use a non zero value. Zero disables data collection. */ + if (lfsr_value == 0) + lfsr_value = calculate_lfsr(1); + + lfsr_value = lfsr_value << 8; /* shift lfsr to correct + * register location + */ + + /* debug bus setup */ + ret = pm_rtas_activate_spu_profiling(cbe_cpu_to_node(cpu)); + + if (unlikely(ret)) { + rtas_error = ret; + goto out; + } + + + subfunc = 2; /* 2 - activate SPU tracing, 3 - deactivate */ + + /* start profiling */ + ret = rtas_call(spu_rtas_token, 3, 1, NULL, subfunc, + cbe_cpu_to_node(cpu), lfsr_value); + + if (unlikely(ret != 0)) { + printk(KERN_ERR + "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n", + __FUNCTION__, ret); + rtas_error = -EIO; + goto out; + } + } + + rtas_error = start_spu_profiling(spu_cycle_reset); + if (rtas_error) + goto out_stop; + + oprofile_running = 1; + return 0; + +out_stop: + cell_global_stop_spu(); /* clean up the PMU/debug bus */ out: - ; + return rtas_error; } -static void cell_global_start(struct op_counter_config *ctr) +static int cell_global_start_ppu(struct op_counter_config *ctr) { - u32 cpu; + u32 cpu, i; u32 interrupt_mask = 0; - u32 i; /* This routine gets called once for the system. * There is one performance monitor per node, so we @@ -651,19 +1002,79 @@ static void cell_global_start(struct op_counter_config *ctr) oprofile_running = 1; smp_wmb(); - /* NOTE: start_virt_cntrs will result in cell_virtual_cntr() being - * executed which manipulates the PMU. We start the "virtual counter" + /* + * NOTE: start_virt_cntrs will result in cell_virtual_cntr() being + * executed which manipulates the PMU. We start the "virtual counter" * here so that we do not need to synchronize access to the PMU in * the above for-loop. */ start_virt_cntrs(); + + return 0; } -static void cell_global_stop(void) +static int cell_global_start(struct op_counter_config *ctr) +{ + if (spu_cycle_reset) + return cell_global_start_spu(ctr); + else + return cell_global_start_ppu(ctr); +} + +/* + * Note the generic OProfile stop calls do not support returning + * an error on stop. Hence, will not return an error if the FW + * calls fail on stop. Failure to reset the debug bus is not an issue. + * Failure to disable the SPU profiling is not an issue. The FW calls + * to enable the performance counters and debug bus will work even if + * the hardware was not cleanly reset. + */ +static void cell_global_stop_spu(void) +{ + int subfunc, rtn_value; + unsigned int lfsr_value; + int cpu; + + oprofile_running = 0; + +#ifdef CONFIG_CPU_FREQ + cpufreq_unregister_notifier(&cpu_freq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); +#endif + + for_each_online_cpu(cpu) { + if (cbe_get_hw_thread_id(cpu)) + continue; + + subfunc = 3; /* + * 2 - activate SPU tracing, + * 3 - deactivate + */ + lfsr_value = 0x8f100000; + + rtn_value = rtas_call(spu_rtas_token, 3, 1, NULL, + subfunc, cbe_cpu_to_node(cpu), + lfsr_value); + + if (unlikely(rtn_value != 0)) { + printk(KERN_ERR + "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n", + __FUNCTION__, rtn_value); + } + + /* Deactivate the signals */ + pm_rtas_reset_signals(cbe_cpu_to_node(cpu)); + } + + stop_spu_profiling(); +} + +static void cell_global_stop_ppu(void) { int cpu; - /* This routine will be called once for the system. + /* + * This routine will be called once for the system. * There is one performance monitor per node, so we * only need to perform this function once per node. */ @@ -687,8 +1098,16 @@ static void cell_global_stop(void) } } -static void -cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) +static void cell_global_stop(void) +{ + if (spu_cycle_reset) + cell_global_stop_spu(); + else + cell_global_stop_ppu(); +} + +static void cell_handle_interrupt(struct pt_regs *regs, + struct op_counter_config *ctr) { u32 cpu; u64 pc; @@ -699,13 +1118,15 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) cpu = smp_processor_id(); - /* Need to make sure the interrupt handler and the virt counter + /* + * Need to make sure the interrupt handler and the virt counter * routine are not running at the same time. See the * cell_virtual_cntr() routine for additional comments. */ spin_lock_irqsave(&virt_cntr_lock, flags); - /* Need to disable and reenable the performance counters + /* + * Need to disable and reenable the performance counters * to get the desired behavior from the hardware. This * is hardware specific. */ @@ -714,7 +1135,8 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu); - /* If the interrupt mask has been cleared, then the virt cntr + /* + * If the interrupt mask has been cleared, then the virt cntr * has cleared the interrupt. When the thread that generated * the interrupt is restored, the data count will be restored to * 0xffffff0 to cause the interrupt to be regenerated. @@ -732,18 +1154,20 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) } } - /* The counters were frozen by the interrupt. + /* + * The counters were frozen by the interrupt. * Reenable the interrupt and restart the counters. * If there was a race between the interrupt handler and - * the virtual counter routine. The virutal counter + * the virtual counter routine. The virutal counter * routine may have cleared the interrupts. Hence must * use the virt_cntr_inter_mask to re-enable the interrupts. */ cbe_enable_pm_interrupts(cpu, hdw_thread, virt_cntr_inter_mask); - /* The writes to the various performance counters only writes - * to a latch. The new values (interrupt setting bits, reset + /* + * The writes to the various performance counters only writes + * to a latch. The new values (interrupt setting bits, reset * counter value etc.) are not copied to the actual registers * until the performance monitor is enabled. In order to get * this to work as desired, the permormance monitor needs to @@ -755,10 +1179,33 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) spin_unlock_irqrestore(&virt_cntr_lock, flags); } +/* + * This function is called from the generic OProfile + * driver. When profiling PPUs, we need to do the + * generic sync start; otherwise, do spu_sync_start. + */ +static int cell_sync_start(void) +{ + if (spu_cycle_reset) + return spu_sync_start(); + else + return DO_GENERIC_SYNC; +} + +static int cell_sync_stop(void) +{ + if (spu_cycle_reset) + return spu_sync_stop(); + else + return 1; +} + struct op_powerpc_model op_model_cell = { .reg_setup = cell_reg_setup, .cpu_setup = cell_cpu_setup, .global_start = cell_global_start, .global_stop = cell_global_stop, + .sync_start = cell_sync_start, + .sync_stop = cell_sync_stop, .handle_interrupt = cell_handle_interrupt, }; diff --git a/arch/powerpc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c index 2267eb8c661b..183a28bb1812 100644 --- a/arch/powerpc/oprofile/op_model_fsl_booke.c +++ b/arch/powerpc/oprofile/op_model_fsl_booke.c @@ -244,7 +244,7 @@ static void dump_pmcs(void) mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3)); } -static void fsl_booke_cpu_setup(struct op_counter_config *ctr) +static int fsl_booke_cpu_setup(struct op_counter_config *ctr) { int i; @@ -258,9 +258,11 @@ static void fsl_booke_cpu_setup(struct op_counter_config *ctr) set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel); } + + return 0; } -static void fsl_booke_reg_setup(struct op_counter_config *ctr, +static int fsl_booke_reg_setup(struct op_counter_config *ctr, struct op_system_config *sys, int num_ctrs) { @@ -276,9 +278,10 @@ static void fsl_booke_reg_setup(struct op_counter_config *ctr, for (i = 0; i < num_counters; ++i) reset_value[i] = 0x80000000UL - ctr[i].count; + return 0; } -static void fsl_booke_start(struct op_counter_config *ctr) +static int fsl_booke_start(struct op_counter_config *ctr) { int i; @@ -308,6 +311,8 @@ static void fsl_booke_start(struct op_counter_config *ctr) pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(), mfpmr(PMRN_PMGC0)); + + return 0; } static void fsl_booke_stop(void) diff --git a/arch/powerpc/oprofile/op_model_pa6t.c b/arch/powerpc/oprofile/op_model_pa6t.c index e8a56b0adadc..c40de461fd4e 100644 --- a/arch/powerpc/oprofile/op_model_pa6t.c +++ b/arch/powerpc/oprofile/op_model_pa6t.c @@ -89,7 +89,7 @@ static inline void ctr_write(unsigned int i, u64 val) /* precompute the values to stuff in the hardware registers */ -static void pa6t_reg_setup(struct op_counter_config *ctr, +static int pa6t_reg_setup(struct op_counter_config *ctr, struct op_system_config *sys, int num_ctrs) { @@ -135,10 +135,12 @@ static void pa6t_reg_setup(struct op_counter_config *ctr, pr_debug("reset_value for pmc%u inited to 0x%lx\n", pmc, reset_value[pmc]); } + + return 0; } /* configure registers on this cpu */ -static void pa6t_cpu_setup(struct op_counter_config *ctr) +static int pa6t_cpu_setup(struct op_counter_config *ctr) { u64 mmcr0 = mmcr0_val; u64 mmcr1 = mmcr1_val; @@ -154,9 +156,11 @@ static void pa6t_cpu_setup(struct op_counter_config *ctr) mfspr(SPRN_PA6T_MMCR0)); pr_debug("setup on cpu %d, mmcr1 %016lx\n", smp_processor_id(), mfspr(SPRN_PA6T_MMCR1)); + + return 0; } -static void pa6t_start(struct op_counter_config *ctr) +static int pa6t_start(struct op_counter_config *ctr) { int i; @@ -174,6 +178,8 @@ static void pa6t_start(struct op_counter_config *ctr) oprofile_running = 1; pr_debug("start on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0); + + return 0; } static void pa6t_stop(void) diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index a7c206b665af..cddc250a6a5c 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -32,7 +32,7 @@ static u32 mmcr0_val; static u64 mmcr1_val; static u64 mmcra_val; -static void power4_reg_setup(struct op_counter_config *ctr, +static int power4_reg_setup(struct op_counter_config *ctr, struct op_system_config *sys, int num_ctrs) { @@ -60,6 +60,8 @@ static void power4_reg_setup(struct op_counter_config *ctr, mmcr0_val &= ~MMCR0_PROBLEM_DISABLE; else mmcr0_val |= MMCR0_PROBLEM_DISABLE; + + return 0; } extern void ppc64_enable_pmcs(void); @@ -84,7 +86,7 @@ static inline int mmcra_must_set_sample(void) return 0; } -static void power4_cpu_setup(struct op_counter_config *ctr) +static int power4_cpu_setup(struct op_counter_config *ctr) { unsigned int mmcr0 = mmcr0_val; unsigned long mmcra = mmcra_val; @@ -111,9 +113,11 @@ static void power4_cpu_setup(struct op_counter_config *ctr) mfspr(SPRN_MMCR1)); dbg("setup on cpu %d, mmcra %lx\n", smp_processor_id(), mfspr(SPRN_MMCRA)); + + return 0; } -static void power4_start(struct op_counter_config *ctr) +static int power4_start(struct op_counter_config *ctr) { int i; unsigned int mmcr0; @@ -148,6 +152,7 @@ static void power4_start(struct op_counter_config *ctr) oprofile_running = 1; dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); + return 0; } static void power4_stop(void) diff --git a/arch/powerpc/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c index c731acbfb2a5..a20afe45d936 100644 --- a/arch/powerpc/oprofile/op_model_rs64.c +++ b/arch/powerpc/oprofile/op_model_rs64.c @@ -88,7 +88,7 @@ static unsigned long reset_value[OP_MAX_COUNTER]; static int num_counters; -static void rs64_reg_setup(struct op_counter_config *ctr, +static int rs64_reg_setup(struct op_counter_config *ctr, struct op_system_config *sys, int num_ctrs) { @@ -100,9 +100,10 @@ static void rs64_reg_setup(struct op_counter_config *ctr, reset_value[i] = 0x80000000UL - ctr[i].count; /* XXX setup user and kernel profiling */ + return 0; } -static void rs64_cpu_setup(struct op_counter_config *ctr) +static int rs64_cpu_setup(struct op_counter_config *ctr) { unsigned int mmcr0; @@ -125,9 +126,11 @@ static void rs64_cpu_setup(struct op_counter_config *ctr) mfspr(SPRN_MMCR0)); dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(), mfspr(SPRN_MMCR1)); + + return 0; } -static void rs64_start(struct op_counter_config *ctr) +static int rs64_start(struct op_counter_config *ctr) { int i; unsigned int mmcr0; @@ -155,6 +158,7 @@ static void rs64_start(struct op_counter_config *ctr) mtspr(SPRN_MMCR0, mmcr0); dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); + return 0; } static void rs64_stop(void) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index a7efb999d65e..6694f86d7000 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -22,6 +22,7 @@ #include <linux/fs.h> #include <linux/mm.h> +#include <linux/module.h> #include <linux/slab.h> #include <asm/atomic.h> #include <asm/spu.h> @@ -81,6 +82,8 @@ void destroy_spu_context(struct kref *kref) spu_fini_csa(&ctx->csa); if (ctx->gang) spu_gang_remove_ctx(ctx->gang, ctx); + if (ctx->prof_priv_kref) + kref_put(ctx->prof_priv_kref, ctx->prof_priv_release); BUG_ON(!list_empty(&ctx->rq)); atomic_dec(&nr_spu_contexts); kfree(ctx); @@ -185,3 +188,20 @@ void spu_release_saved(struct spu_context *ctx) spu_release(ctx); } + +void spu_set_profile_private_kref(struct spu_context *ctx, + struct kref *prof_info_kref, + void ( * prof_info_release) (struct kref *kref)) +{ + ctx->prof_priv_kref = prof_info_kref; + ctx->prof_priv_release = prof_info_release; +} +EXPORT_SYMBOL_GPL(spu_set_profile_private_kref); + +void *spu_get_profile_private_kref(struct spu_context *ctx) +{ + return ctx->prof_priv_kref; +} +EXPORT_SYMBOL_GPL(spu_get_profile_private_kref); + + diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 88ec333e90d3..44e2338a05d5 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -274,6 +274,7 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) ctx->spu = spu; ctx->ops = &spu_hw_ops; spu->pid = current->pid; + spu->tgid = current->tgid; spu_associate_mm(spu, ctx->owner); spu->ibox_callback = spufs_ibox_callback; spu->wbox_callback = spufs_wbox_callback; @@ -456,6 +457,7 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) spu->dma_callback = NULL; spu_associate_mm(spu, NULL); spu->pid = 0; + spu->tgid = 0; ctx->ops = &spu_backing_ops; spu->flags = 0; spu->ctx = NULL; @@ -737,7 +739,7 @@ void spu_deactivate(struct spu_context *ctx) } /** - * spu_yield - yield a physical spu if others are waiting + * spu_yield - yield a physical spu if others are waiting * @ctx: spu context to yield * * Check if there is a higher priority context waiting and if yes diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 692dbd0edc37..8b20c0c1556f 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -85,6 +85,8 @@ struct spu_context { struct list_head gang_list; struct spu_gang *gang; + struct kref *prof_priv_kref; + void ( * prof_priv_release) (struct kref *kref); /* owner thread */ pid_t tid; diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c index edd6de995726..8134c7e198a5 100644 --- a/drivers/oprofile/buffer_sync.c +++ b/drivers/oprofile/buffer_sync.c @@ -26,8 +26,9 @@ #include <linux/profile.h> #include <linux/module.h> #include <linux/fs.h> +#include <linux/oprofile.h> #include <linux/sched.h> - + #include "oprofile_stats.h" #include "event_buffer.h" #include "cpu_buffer.h" diff --git a/drivers/oprofile/event_buffer.h b/drivers/oprofile/event_buffer.h index 9b6a4ebd03e3..5076ed1ebd8f 100644 --- a/drivers/oprofile/event_buffer.h +++ b/drivers/oprofile/event_buffer.h @@ -19,28 +19,10 @@ void free_event_buffer(void); /* wake up the process sleeping on the event file */ void wake_up_buffer_waiter(void); - -/* Each escaped entry is prefixed by ESCAPE_CODE - * then one of the following codes, then the - * relevant data. - */ -#define ESCAPE_CODE ~0UL -#define CTX_SWITCH_CODE 1 -#define CPU_SWITCH_CODE 2 -#define COOKIE_SWITCH_CODE 3 -#define KERNEL_ENTER_SWITCH_CODE 4 -#define KERNEL_EXIT_SWITCH_CODE 5 -#define MODULE_LOADED_CODE 6 -#define CTX_TGID_CODE 7 -#define TRACE_BEGIN_CODE 8 -#define TRACE_END_CODE 9 - + #define INVALID_COOKIE ~0UL #define NO_COOKIE 0UL -/* add data to the event buffer */ -void add_event_entry(unsigned long data); - extern const struct file_operations event_buffer_fops; /* mutex between sync_cpu_buffers() and the diff --git a/drivers/oprofile/oprof.c b/drivers/oprofile/oprof.c index e5162a64018b..2c645170f06e 100644 --- a/drivers/oprofile/oprof.c +++ b/drivers/oprofile/oprof.c @@ -53,9 +53,24 @@ int oprofile_setup(void) * us missing task deaths and eventually oopsing * when trying to process the event buffer. */ + if (oprofile_ops.sync_start) { + int sync_ret = oprofile_ops.sync_start(); + switch (sync_ret) { + case 0: + goto post_sync; + case 1: + goto do_generic; + case -1: + goto out3; + default: + goto out3; + } + } +do_generic: if ((err = sync_start())) goto out3; +post_sync: is_setup = 1; mutex_unlock(&start_mutex); return 0; @@ -118,7 +133,20 @@ out: void oprofile_shutdown(void) { mutex_lock(&start_mutex); + if (oprofile_ops.sync_stop) { + int sync_ret = oprofile_ops.sync_stop(); + switch (sync_ret) { + case 0: + goto post_sync; + case 1: + goto do_generic; + default: + goto post_sync; + } + } +do_generic: sync_stop(); +post_sync: if (oprofile_ops.shutdown) oprofile_ops.shutdown(); is_setup = 0; diff --git a/include/asm-powerpc/oprofile_impl.h b/include/asm-powerpc/oprofile_impl.h index 8d6b47f7b300..938fefb4c4bc 100644 --- a/include/asm-powerpc/oprofile_impl.h +++ b/include/asm-powerpc/oprofile_impl.h @@ -39,14 +39,16 @@ struct op_system_config { /* Per-arch configuration */ struct op_powerpc_model { - void (*reg_setup) (struct op_counter_config *, + int (*reg_setup) (struct op_counter_config *, struct op_system_config *, int num_counters); - void (*cpu_setup) (struct op_counter_config *); - void (*start) (struct op_counter_config *); - void (*global_start) (struct op_counter_config *); + int (*cpu_setup) (struct op_counter_config *); + int (*start) (struct op_counter_config *); + int (*global_start) (struct op_counter_config *); void (*stop) (void); void (*global_stop) (void); + int (*sync_start)(void); + int (*sync_stop)(void); void (*handle_interrupt) (struct pt_regs *, struct op_counter_config *); int num_counters; diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index 24f352da2869..a0f7fc8e23bb 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -138,6 +138,7 @@ struct spu { struct spu_runqueue *rq; unsigned long long timestamp; pid_t pid; + pid_t tgid; int class_0_pending; spinlock_t register_lock; @@ -217,6 +218,20 @@ extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm); struct mm_struct; extern void spu_flush_all_slbs(struct mm_struct *mm); +/* This interface allows a profiler (e.g., OProfile) to store a ref + * to spu context information that it creates. This caching technique + * avoids the need to recreate this information after a save/restore operation. + * + * Assumes the caller has already incremented the ref count to + * profile_info; then spu_context_destroy must call kref_put + * on prof_info_kref. + */ +void spu_set_profile_private_kref(struct spu_context *ctx, + struct kref *prof_info_kref, + void ( * prof_info_release) (struct kref *kref)); + +void *spu_get_profile_private_kref(struct spu_context *ctx); + /* system callbacks from the SPU */ struct spu_syscall_block { u64 nr_ret; diff --git a/include/linux/dcookies.h b/include/linux/dcookies.h index 0fe7cdf326f7..98c69ab80c84 100644 --- a/include/linux/dcookies.h +++ b/include/linux/dcookies.h @@ -12,6 +12,7 @@ #ifdef CONFIG_PROFILING +#include <linux/dcache.h> #include <linux/types.h> struct dcookie_user; diff --git a/include/linux/elf-em.h b/include/linux/elf-em.h index 0311bad838b1..5834e843a946 100644 --- a/include/linux/elf-em.h +++ b/include/linux/elf-em.h @@ -20,7 +20,8 @@ #define EM_PARISC 15 /* HPPA */ #define EM_SPARC32PLUS 18 /* Sun's "v8plus" */ #define EM_PPC 20 /* PowerPC */ -#define EM_PPC64 21 /* PowerPC64 */ +#define EM_PPC64 21 /* PowerPC64 */ +#define EM_SPU 23 /* Cell BE SPU */ #define EM_SH 42 /* SuperH */ #define EM_SPARCV9 43 /* SPARC v9 64-bit */ #define EM_IA_64 50 /* HP/Intel IA-64 */ diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h index 0d514b252454..041bb31100f4 100644 --- a/include/linux/oprofile.h +++ b/include/linux/oprofile.h @@ -17,6 +17,26 @@ #include <linux/spinlock.h> #include <asm/atomic.h> +/* Each escaped entry is prefixed by ESCAPE_CODE + * then one of the following codes, then the + * relevant data. + * These #defines live in this file so that arch-specific + * buffer sync'ing code can access them. + */ +#define ESCAPE_CODE ~0UL +#define CTX_SWITCH_CODE 1 +#define CPU_SWITCH_CODE 2 +#define COOKIE_SWITCH_CODE 3 +#define KERNEL_ENTER_SWITCH_CODE 4 +#define KERNEL_EXIT_SWITCH_CODE 5 +#define MODULE_LOADED_CODE 6 +#define CTX_TGID_CODE 7 +#define TRACE_BEGIN_CODE 8 +#define TRACE_END_CODE 9 +#define XEN_ENTER_SWITCH_CODE 10 +#define SPU_PROFILING_CODE 11 +#define SPU_CTX_SWITCH_CODE 12 + struct super_block; struct dentry; struct file_operations; @@ -35,6 +55,14 @@ struct oprofile_operations { int (*start)(void); /* Stop delivering interrupts. */ void (*stop)(void); + /* Arch-specific buffer sync functions. + * Return value = 0: Success + * Return value = -1: Failure + * Return value = 1: Run generic sync function + */ + int (*sync_start)(void); + int (*sync_stop)(void); + /* Initiate a stack backtrace. Optional. */ void (*backtrace)(struct pt_regs * const regs, unsigned int depth); /* CPU identification string. */ @@ -56,6 +84,13 @@ int oprofile_arch_init(struct oprofile_operations * ops); void oprofile_arch_exit(void); /** + * Add data to the event buffer. + * The data passed is free-form, but typically consists of + * file offsets, dcookies, context information, and ESCAPE codes. + */ +void add_event_entry(unsigned long data); + +/** * Add a sample. This may be called from any context. Pass * smp_processor_id() as cpu. */ |