diff options
| author | Jan Beulich <JBeulich@novell.com> | 2011-02-18 03:18:26 -0500 |
|---|---|---|
| committer | Guenter Roeck <guenter.roeck@ericsson.com> | 2011-02-18 17:43:36 -0800 |
| commit | f065a93e168299569078bc6f52128b57f602fff3 (patch) | |
| tree | 9871298638d0a75f4b0f4a419ef71655f3e01962 | |
| parent | 4eb2abcd09e2c939aec0f0df005c84806895ce0d (diff) | |
hwmon: (lm85) extend to support EMC6D103 chips
The interface is identical EMC6D102, so all that needs to be added are
some definitions and their uses.
Registers apparently missing in EMC6D103S/EMC6D103:A2 compared to EMC6D103:A0,
EMC6D103:A1, and EMC6D102 (according to the data sheets), but used
unconditionally in the driver: 62[5:7], 6D[0:7], and 6E[0:7]. For that
reason, EMC6D103S chips don't get enabled for the time being.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
(Guenter Roeck: Replaced EMC6D103_A2 with EMC6D103S per EMC6D103S datasheet)
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@kernel.org
| -rw-r--r-- | drivers/hwmon/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/hwmon/lm85.c | 23 |
2 files changed, 22 insertions, 3 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 5eadb007e542..297bc9a7d6e6 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -575,7 +575,7 @@ config SENSORS_LM85 help If you say yes here you get support for National Semiconductor LM85 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, - EMC6D101 and EMC6D102. + EMC6D101, EMC6D102, and EMC6D103. This driver can also be built as a module. If so, the module will be called lm85. diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 1e229847f37a..d2cc28660816 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -41,7 +41,7 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; enum chips { any_chip, lm85b, lm85c, adm1027, adt7463, adt7468, - emc6d100, emc6d102 + emc6d100, emc6d102, emc6d103 }; /* The LM85 registers */ @@ -90,6 +90,9 @@ enum chips { #define LM85_VERSTEP_EMC6D100_A0 0x60 #define LM85_VERSTEP_EMC6D100_A1 0x61 #define LM85_VERSTEP_EMC6D102 0x65 +#define LM85_VERSTEP_EMC6D103_A0 0x68 +#define LM85_VERSTEP_EMC6D103_A1 0x69 +#define LM85_VERSTEP_EMC6D103S 0x6A /* Also known as EMC6D103:A2 */ #define LM85_REG_CONFIG 0x40 @@ -348,6 +351,7 @@ static const struct i2c_device_id lm85_id[] = { { "emc6d100", emc6d100 }, { "emc6d101", emc6d100 }, { "emc6d102", emc6d102 }, + { "emc6d103", emc6d103 }, { } }; MODULE_DEVICE_TABLE(i2c, lm85_id); @@ -1250,6 +1254,20 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info) case LM85_VERSTEP_EMC6D102: type_name = "emc6d102"; break; + case LM85_VERSTEP_EMC6D103_A0: + case LM85_VERSTEP_EMC6D103_A1: + type_name = "emc6d103"; + break; + /* + * Registers apparently missing in EMC6D103S/EMC6D103:A2 + * compared to EMC6D103:A0, EMC6D103:A1, and EMC6D102 + * (according to the data sheets), but used unconditionally + * in the driver: 62[5:7], 6D[0:7], and 6E[0:7]. + * So skip EMC6D103S for now. + case LM85_VERSTEP_EMC6D103S: + type_name = "emc6d103s"; + break; + */ } } else { dev_dbg(&adapter->dev, @@ -1283,6 +1301,7 @@ static int lm85_probe(struct i2c_client *client, case adt7468: case emc6d100: case emc6d102: + case emc6d103: data->freq_map = adm1027_freq_map; break; default: @@ -1468,7 +1487,7 @@ static struct lm85_data *lm85_update_device(struct device *dev) /* More alarm bits */ data->alarms |= lm85_read_value(client, EMC6D100_REG_ALARM3) << 16; - } else if (data->type == emc6d102) { + } else if (data->type == emc6d102 || data->type == emc6d103) { /* Have to read LSB bits after the MSB ones because the reading of the MSB bits has frozen the LSBs (backward from the ADM1027). |