summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-02-20 10:15:22 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2011-02-20 10:15:22 -0800
commita0c85e96d3b5609c918edd5a534a7cde9845b3fa (patch)
tree696c9adb92f73bde9f50e52fe315a868c2801cd8
parente58713724059da7d2982d6ad945192c8fca5b729 (diff)
parentf065a93e168299569078bc6f52128b57f602fff3 (diff)
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (lm85) extend to support EMC6D103 chips MAINTAINERS: Remove stale hwmon quilt tree hwmon: (k10temp) add support for AMD Family 12h/14h CPUs hwmon: (jc42) do not allow writing to locked registers hwmon: (jc42) more helpful documentation hwmon: (jc42) fix type mismatch
-rw-r--r--Documentation/hwmon/jc4221
-rw-r--r--Documentation/hwmon/k10temp8
-rw-r--r--MAINTAINERS1
-rw-r--r--drivers/hwmon/Kconfig19
-rw-r--r--drivers/hwmon/jc42.c35
-rw-r--r--drivers/hwmon/k10temp.c5
-rw-r--r--drivers/hwmon/lm85.c23
7 files changed, 86 insertions, 26 deletions
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index 0e76ef12e4c6..a22ecf48f255 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -51,7 +51,8 @@ Supported chips:
* JEDEC JC 42.4 compliant temperature sensor chips
Prefix: 'jc42'
Addresses scanned: I2C 0x18 - 0x1f
- Datasheet: -
+ Datasheet:
+ http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
Author:
Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@ Author:
Description
-----------
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
The driver auto-detects the chips listed above, but can be manually instantiated
to support other JC 42.4 compliant chips.
@@ -81,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis,
which applies to all limits. This register can be written by writing into
temp1_crit_hyst. Other hysteresis attributes are read-only.
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
Sysfs entries
-------------
temp1_input Temperature (RO)
-temp1_min Minimum temperature (RW)
-temp1_max Maximum temperature (RW)
-temp1_crit Critical high temperature (RW)
+temp1_min Minimum temperature (RO or RW)
+temp1_max Maximum temperature (RO or RW)
+temp1_crit Critical high temperature (RO or RW)
-temp1_crit_hyst Critical hysteresis temperature (RW)
+temp1_crit_hyst Critical hysteresis temperature (RO or RW)
temp1_max_hyst Maximum hysteresis temperature (RO)
temp1_min_alarm Temperature low alarm
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index 6526eee525a6..d2b56a4fd1f5 100644
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -9,6 +9,8 @@ Supported chips:
Socket S1G3: Athlon II, Sempron, Turion II
* AMD Family 11h processors:
Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
Prefix: 'k10temp'
Addresses scanned: PCI space
@@ -17,10 +19,14 @@ Supported chips:
http://support.amd.com/us/Processor_TechDocs/31116.pdf
BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41256.pdf
+ BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+ http://support.amd.com/us/Processor_TechDocs/43170.pdf
Revision Guide for AMD Family 10h Processors:
http://support.amd.com/us/Processor_TechDocs/41322.pdf
Revision Guide for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41788.pdf
+ Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+ http://support.amd.com/us/Processor_TechDocs/47534.pdf
AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
http://support.amd.com/us/Processor_TechDocs/43373.pdf
AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@ Description
-----------
This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
All these processors have a sensor, but on those for Socket F or AM2+,
the sensor may return inconsistent values (erratum 319). The driver
diff --git a/MAINTAINERS b/MAINTAINERS
index 3f1e0081d3cb..6f99e1260db8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2873,7 +2873,6 @@ M: Guenter Roeck <guenter.roeck@ericsson.com>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
-T: quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
S: Maintained
F: Documentation/hwmon/
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 773e484f1646..297bc9a7d6e6 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -238,13 +238,13 @@ config SENSORS_K8TEMP
will be called k8temp.
config SENSORS_K10TEMP
- tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+ tristate "AMD Family 10h/11h/12h/14h temperature sensor"
depends on X86 && PCI
help
If you say yes here you get support for the temperature
sensor(s) inside your CPU. Supported are later revisions of
- the AMD Family 10h and all revisions of the AMD Family 11h
- microarchitectures.
+ the AMD Family 10h and all revisions of the AMD Family 11h,
+ 12h (Llano), and 14h (Brazos) microarchitectures.
This driver can also be built as a module. If so, the module
will be called k10temp.
@@ -455,13 +455,14 @@ config SENSORS_JZ4740
called jz4740-hwmon.
config SENSORS_JC42
- tristate "JEDEC JC42.4 compliant temperature sensors"
+ tristate "JEDEC JC42.4 compliant memory module temperature sensors"
depends on I2C
help
- If you say yes here you get support for Jedec JC42.4 compliant
- temperature sensors. Support will include, but not be limited to,
- ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
- MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3.
+ If you say yes here, you get support for JEDEC JC42.4 compliant
+ temperature sensors, which are used on many DDR3 memory modules for
+ mobile devices and servers. Support will include, but not be limited
+ to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
+ MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
This driver can also be built as a module. If so, the module
will be called jc42.
@@ -574,7 +575,7 @@ config SENSORS_LM85
help
If you say yes here you get support for National Semiconductor LM85
sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
- EMC6D101 and EMC6D102.
+ EMC6D101, EMC6D102, and EMC6D103.
This driver can also be built as a module. If so, the module
will be called lm85.
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 340fc78c8dde..934991237061 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -53,6 +53,8 @@ static const unsigned short normal_i2c[] = {
/* Configuration register defines */
#define JC42_CFG_CRIT_ONLY (1 << 2)
+#define JC42_CFG_TCRIT_LOCK (1 << 6)
+#define JC42_CFG_EVENT_LOCK (1 << 7)
#define JC42_CFG_SHUTDOWN (1 << 8)
#define JC42_CFG_HYST_SHIFT 9
#define JC42_CFG_HYST_MASK 0x03
@@ -332,7 +334,7 @@ static ssize_t set_temp_crit_hyst(struct device *dev,
{
struct i2c_client *client = to_i2c_client(dev);
struct jc42_data *data = i2c_get_clientdata(client);
- long val;
+ unsigned long val;
int diff, hyst;
int err;
int ret = count;
@@ -380,14 +382,14 @@ static ssize_t show_alarm(struct device *dev,
static DEVICE_ATTR(temp1_input, S_IRUGO,
show_temp_input, NULL);
-static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit, S_IRUGO,
show_temp_crit, set_temp_crit);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_min, S_IRUGO,
show_temp_min, set_temp_min);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_max, S_IRUGO,
show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
show_temp_crit_hyst, set_temp_crit_hyst);
static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
show_temp_max_hyst, NULL);
@@ -412,8 +414,31 @@ static struct attribute *jc42_attributes[] = {
NULL
};
+static mode_t jc42_attribute_mode(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct jc42_data *data = i2c_get_clientdata(client);
+ unsigned int config = data->config;
+ bool readonly;
+
+ if (attr == &dev_attr_temp1_crit.attr)
+ readonly = config & JC42_CFG_TCRIT_LOCK;
+ else if (attr == &dev_attr_temp1_min.attr ||
+ attr == &dev_attr_temp1_max.attr)
+ readonly = config & JC42_CFG_EVENT_LOCK;
+ else if (attr == &dev_attr_temp1_crit_hyst.attr)
+ readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK);
+ else
+ readonly = true;
+
+ return S_IRUGO | (readonly ? 0 : S_IWUSR);
+}
+
static const struct attribute_group jc42_group = {
.attrs = jc42_attributes,
+ .is_visible = jc42_attribute_mode,
};
/* Return 0 if detection is successful, -ENODEV otherwise */
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index da5a2404cd3e..82bf65aa2968 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -1,5 +1,5 @@
/*
- * k10temp.c - AMD Family 10h/11h processor hardware monitoring
+ * k10temp.c - AMD Family 10h/11h/12h/14h processor hardware monitoring
*
* Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
*
@@ -25,7 +25,7 @@
#include <linux/pci.h>
#include <asm/processor.h>
-MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor");
+MODULE_DESCRIPTION("AMD Family 10h/11h/12h/14h CPU core temperature monitor");
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
MODULE_LICENSE("GPL");
@@ -208,6 +208,7 @@ static void __devexit k10temp_remove(struct pci_dev *pdev)
static const struct pci_device_id k10temp_id_table[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
{}
};
MODULE_DEVICE_TABLE(pci, k10temp_id_table);
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 1e229847f37a..d2cc28660816 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -41,7 +41,7 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
enum chips {
any_chip, lm85b, lm85c,
adm1027, adt7463, adt7468,
- emc6d100, emc6d102
+ emc6d100, emc6d102, emc6d103
};
/* The LM85 registers */
@@ -90,6 +90,9 @@ enum chips {
#define LM85_VERSTEP_EMC6D100_A0 0x60
#define LM85_VERSTEP_EMC6D100_A1 0x61
#define LM85_VERSTEP_EMC6D102 0x65
+#define LM85_VERSTEP_EMC6D103_A0 0x68
+#define LM85_VERSTEP_EMC6D103_A1 0x69
+#define LM85_VERSTEP_EMC6D103S 0x6A /* Also known as EMC6D103:A2 */
#define LM85_REG_CONFIG 0x40
@@ -348,6 +351,7 @@ static const struct i2c_device_id lm85_id[] = {
{ "emc6d100", emc6d100 },
{ "emc6d101", emc6d100 },
{ "emc6d102", emc6d102 },
+ { "emc6d103", emc6d103 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm85_id);
@@ -1250,6 +1254,20 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
case LM85_VERSTEP_EMC6D102:
type_name = "emc6d102";
break;
+ case LM85_VERSTEP_EMC6D103_A0:
+ case LM85_VERSTEP_EMC6D103_A1:
+ type_name = "emc6d103";
+ break;
+ /*
+ * Registers apparently missing in EMC6D103S/EMC6D103:A2
+ * compared to EMC6D103:A0, EMC6D103:A1, and EMC6D102
+ * (according to the data sheets), but used unconditionally
+ * in the driver: 62[5:7], 6D[0:7], and 6E[0:7].
+ * So skip EMC6D103S for now.
+ case LM85_VERSTEP_EMC6D103S:
+ type_name = "emc6d103s";
+ break;
+ */
}
} else {
dev_dbg(&adapter->dev,
@@ -1283,6 +1301,7 @@ static int lm85_probe(struct i2c_client *client,
case adt7468:
case emc6d100:
case emc6d102:
+ case emc6d103:
data->freq_map = adm1027_freq_map;
break;
default:
@@ -1468,7 +1487,7 @@ static struct lm85_data *lm85_update_device(struct device *dev)
/* More alarm bits */
data->alarms |= lm85_read_value(client,
EMC6D100_REG_ALARM3) << 16;
- } else if (data->type == emc6d102) {
+ } else if (data->type == emc6d102 || data->type == emc6d103) {
/* Have to read LSB bits after the MSB ones because
the reading of the MSB bits has frozen the
LSBs (backward from the ADM1027).