[IrDA]: Irport removal - part 2

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 files changed, 0 insertions, 2328 deletions

diff --git a/drivers/net/irda/act200l.c b/drivers/net/irda/act200l.c
deleted file mode 100644
index 756cd44e857a..000000000000
--- a/drivers/net/irda/act200l.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*********************************************************************
- *
- * Filename:      act200l.c
- * Version:       0.8
- * Description:   Implementation for the ACTiSYS ACT-IR200L dongle
- * Status:        Experimental.
- * Author:        SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
- * Created at:    Fri Aug  3 17:35:42 2001
- * Modified at:   Fri Aug 17 10:22:40 2001
- * Modified by:   SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
- *
- *     Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved.
- *
- *     This program is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static int  act200l_reset(struct irda_task *task);
-static void act200l_open(dongle_t *self, struct qos_info *qos);
-static void act200l_close(dongle_t *self);
-static int  act200l_change_speed(struct irda_task *task);
-
-/* Regsiter 0: Control register #1 */
-#define ACT200L_REG0    0x00
-#define ACT200L_TXEN    0x01 /* Enable transmitter */
-#define ACT200L_RXEN    0x02 /* Enable receiver */
-
-/* Register 1: Control register #2 */
-#define ACT200L_REG1    0x10
-#define ACT200L_LODB    0x01 /* Load new baud rate count value */
-#define ACT200L_WIDE    0x04 /* Expand the maximum allowable pulse */
-
-/* Register 4: Output Power register */
-#define ACT200L_REG4    0x40
-#define ACT200L_OP0     0x01 /* Enable LED1C output */
-#define ACT200L_OP1     0x02 /* Enable LED2C output */
-#define ACT200L_BLKR    0x04
-
-/* Register 5: Receive Mode register */
-#define ACT200L_REG5    0x50
-#define ACT200L_RWIDL   0x01 /* fixed 1.6us pulse mode */
-
-/* Register 6: Receive Sensitivity register #1 */
-#define ACT200L_REG6    0x60
-#define ACT200L_RS0     0x01 /* receive threshold bit 0 */
-#define ACT200L_RS1     0x02 /* receive threshold bit 1 */
-
-/* Register 7: Receive Sensitivity register #2 */
-#define ACT200L_REG7    0x70
-#define ACT200L_ENPOS   0x04 /* Ignore the falling edge */
-
-/* Register 8,9: Baud Rate Dvider register #1,#2 */
-#define ACT200L_REG8    0x80
-#define ACT200L_REG9    0x90
-
-#define ACT200L_2400    0x5f
-#define ACT200L_9600    0x17
-#define ACT200L_19200   0x0b
-#define ACT200L_38400   0x05
-#define ACT200L_57600   0x03
-#define ACT200L_115200  0x01
-
-/* Register 13: Control register #3 */
-#define ACT200L_REG13   0xd0
-#define ACT200L_SHDW    0x01 /* Enable access to shadow registers */
-
-/* Register 15: Status register */
-#define ACT200L_REG15   0xf0
-
-/* Register 21: Control register #4 */
-#define ACT200L_REG21   0x50
-#define ACT200L_EXCK    0x02 /* Disable clock output driver */
-#define ACT200L_OSCL    0x04 /* oscillator in low power, medium accuracy mode */
-
-static struct dongle_reg dongle = {
-	.type = IRDA_ACT200L_DONGLE,
-	.open = act200l_open,
-	.close = act200l_close,
-	.reset = act200l_reset,
-	.change_speed = act200l_change_speed,
-	.owner = THIS_MODULE,
-};
-
-static int __init act200l_init(void)
-{
-	return irda_device_register_dongle(&dongle);
-}
-
-static void __exit act200l_cleanup(void)
-{
-	irda_device_unregister_dongle(&dongle);
-}
-
-static void act200l_open(dongle_t *self, struct qos_info *qos)
-{
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
-	/* Power on the dongle */
-	self->set_dtr_rts(self->dev, TRUE, TRUE);
-
-	/* Set the speeds we can accept */
-	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
-	qos->min_turn_time.bits = 0x03;
-}
-
-static void act200l_close(dongle_t *self)
-{
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
-	/* Power off the dongle */
-	self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function act200l_change_speed (dev, speed)
- *
- *    Set the speed for the ACTiSYS ACT-IR200L type dongle.
- *
- */
-static int act200l_change_speed(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	__u32 speed = (__u32) task->param;
-	__u8 control[3];
-	int ret = 0;
-
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
-	self->speed_task = task;
-
-	switch (task->state) {
-	case IRDA_TASK_INIT:
-		if (irda_task_execute(self, act200l_reset, NULL, task,
-				(void *) speed))
-		{
-			/* Dongle need more time to reset */
-			irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
-			/* Give reset 1 sec to finish */
-			ret = msecs_to_jiffies(1000);
-		}
-		break;
-	case IRDA_TASK_CHILD_WAIT:
-		IRDA_WARNING("%s(), resetting dongle timed out!\n",
-			     __FUNCTION__);
-		ret = -1;
-		break;
-	case IRDA_TASK_CHILD_DONE:
-		/* Clear DTR and set RTS to enter command mode */
-		self->set_dtr_rts(self->dev, FALSE, TRUE);
-
-		switch (speed) {
-		case 9600:
-		default:
-			control[0] = ACT200L_REG8 |  (ACT200L_9600       & 0x0f);
-			control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f);
-			break;
-		case 19200:
-			control[0] = ACT200L_REG8 |  (ACT200L_19200       & 0x0f);
-			control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f);
-			break;
-		case 38400:
-			control[0] = ACT200L_REG8 |  (ACT200L_38400       & 0x0f);
-			control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f);
-			break;
-		case 57600:
-			control[0] = ACT200L_REG8 |  (ACT200L_57600       & 0x0f);
-			control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f);
-			break;
-		case 115200:
-			control[0] = ACT200L_REG8 |  (ACT200L_115200       & 0x0f);
-			control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f);
-			break;
-		}
-		control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE;
-
-		/* Write control bytes */
-		self->write(self->dev, control, 3);
-		irda_task_next_state(task, IRDA_TASK_WAIT);
-		ret = msecs_to_jiffies(5);
-		break;
-	case IRDA_TASK_WAIT:
-		/* Go back to normal mode */
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->speed_task = NULL;
-		break;
-	default:
-		IRDA_ERROR("%s(), unknown state %d\n",
-			   __FUNCTION__, task->state);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->speed_task = NULL;
-		ret = -1;
-		break;
-	}
-	return ret;
-}
-
-/*
- * Function act200l_reset (driver)
- *
- *    Reset the ACTiSYS ACT-IR200L type dongle.
- */
-static int act200l_reset(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	__u8 control[9] = {
-		ACT200L_REG15,
-		ACT200L_REG13 | ACT200L_SHDW,
-		ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
-		ACT200L_REG13,
-		ACT200L_REG7  | ACT200L_ENPOS,
-		ACT200L_REG6  | ACT200L_RS0  | ACT200L_RS1,
-		ACT200L_REG5  | ACT200L_RWIDL,
-		ACT200L_REG4  | ACT200L_OP0  | ACT200L_OP1 | ACT200L_BLKR,
-		ACT200L_REG0  | ACT200L_TXEN | ACT200L_RXEN
-	};
-	int ret = 0;
-
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
-	self->reset_task = task;
-
-	switch (task->state) {
-	case IRDA_TASK_INIT:
-		/* Power on the dongle */
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-
-		irda_task_next_state(task, IRDA_TASK_WAIT1);
-		ret = msecs_to_jiffies(50);
-		break;
-	case IRDA_TASK_WAIT1:
-		/* Reset the dongle : set RTS low for 25 ms */
-		self->set_dtr_rts(self->dev, TRUE, FALSE);
-
-		irda_task_next_state(task, IRDA_TASK_WAIT2);
-		ret = msecs_to_jiffies(50);
-		break;
-	case IRDA_TASK_WAIT2:
-		/* Clear DTR and set RTS to enter command mode */
-		self->set_dtr_rts(self->dev, FALSE, TRUE);
-
-		/* Write control bytes */
-		self->write(self->dev, control, 9);
-		irda_task_next_state(task, IRDA_TASK_WAIT3);
-		ret = msecs_to_jiffies(15);
-		break;
-	case IRDA_TASK_WAIT3:
-		/* Go back to normal mode */
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->reset_task = NULL;
-		break;
-	default:
-		IRDA_ERROR("%s(), unknown state %d\n",
-			   __FUNCTION__, task->state);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->reset_task = NULL;
-		ret = -1;
-		break;
-	}
-	return ret;
-}
-
-MODULE_AUTHOR("SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>");
-MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */
-
-/*
- * Function init_module (void)
- *
- *    Initialize ACTiSYS ACT-IR200L module
- *
- */
-module_init(act200l_init);
-
-/*
- * Function cleanup_module (void)
- *
- *    Cleanup ACTiSYS ACT-IR200L module
- *
- */
-module_exit(act200l_cleanup);
diff --git a/drivers/net/irda/actisys.c b/drivers/net/irda/actisys.c
deleted file mode 100644
index ae0b80a5680c..000000000000
--- a/drivers/net/irda/actisys.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      actisys.c
- * Version:       1.0
- * Description:   Implementation for the ACTiSYS IR-220L and IR-220L+ 
- *                dongles
- * Status:        Beta.
- * Authors:       Dag Brattli <dagb@cs.uit.no> (initially)
- *		  Jean Tourrilhes <jt@hpl.hp.com> (new version)
- * Created at:    Wed Oct 21 20:02:35 1998
- * Modified at:   Fri Dec 17 09:10:43 1999
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
- *     Copyright (c) 1999 Jean Tourrilhes
- *      
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- *  
- *     Neither Dag Brattli nor University of Tromsø admit liability nor
- *     provide warranty for any of this software. This material is 
- *     provided "AS-IS" and at no charge.
- *     
- ********************************************************************/
-
-/*
- * Changelog
- *
- * 0.8 -> 0.9999 - Jean
- *	o New initialisation procedure : much safer and correct
- *	o New procedure the change speed : much faster and simpler
- *	o Other cleanups & comments
- *	Thanks to Lichen Wang @ Actisys for his excellent help...
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-/* 
- * Define the timing of the pulses we send to the dongle (to reset it, and
- * to toggle speeds). Basically, the limit here is the propagation speed of
- * the signals through the serial port, the dongle being much faster.  Any
- * serial port support 115 kb/s, so we are sure that pulses 8.5 us wide can
- * go through cleanly . If you are on the wild side, you can try to lower
- * this value (Actisys recommended me 2 us, and 0 us work for me on a P233!)
- */
-#define MIN_DELAY 10	/* 10 us to be on the conservative side */
-
-static int  actisys_change_speed(struct irda_task *task);
-static int  actisys_reset(struct irda_task *task);
-static void actisys_open(dongle_t *self, struct qos_info *qos);
-static void actisys_close(dongle_t *self);
-
-/* These are the baudrates supported, in the order available */
-/* Note : the 220L doesn't support 38400, but we will fix that below */
-static __u32 baud_rates[] = { 9600, 19200, 57600, 115200, 38400 };
-#define MAX_SPEEDS 5
-
-static struct dongle_reg dongle = {
-	.type = IRDA_ACTISYS_DONGLE,
-	.open = actisys_open,
-	.close = actisys_close,
-	.reset = actisys_reset,
-	.change_speed = actisys_change_speed,
-	.owner = THIS_MODULE,
-};
-
-static struct dongle_reg dongle_plus = {
-	.type = IRDA_ACTISYS_PLUS_DONGLE,
-	.open = actisys_open,
-	.close = actisys_close,
-	.reset = actisys_reset,
-	.change_speed = actisys_change_speed,
-	.owner = THIS_MODULE,
-};
-
-/*
- * Function actisys_change_speed (task)
- *
- *	There is two model of Actisys dongle we are dealing with,
- * the 220L and 220L+. At this point, only irattach knows with
- * kind the user has requested (it was an argument on irattach
- * command line).
- *	So, we register a dongle of each sort and let irattach
- * pick the right one...
- */
-static int __init actisys_init(void)
-{
-	int ret;
-
-	/* First, register an Actisys 220L dongle */
-	ret = irda_device_register_dongle(&dongle);
-	if (ret < 0)
-		return ret;
-	/* Now, register an Actisys 220L+ dongle */
-	ret = irda_device_register_dongle(&dongle_plus);
-	if (ret < 0) {
-		irda_device_unregister_dongle(&dongle);
-		return ret;
-	}	
-	return 0;
-}
-
-static void __exit actisys_cleanup(void)
-{
-	/* We have to remove both dongles */
-	irda_device_unregister_dongle(&dongle);
-	irda_device_unregister_dongle(&dongle_plus);
-}
-
-static void actisys_open(dongle_t *self, struct qos_info *qos)
-{
-	/* Power on the dongle */
-	self->set_dtr_rts(self->dev, TRUE, TRUE);
-
-	/* Set the speeds we can accept */
-	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
-
-	/* Remove support for 38400 if this is not a 220L+ dongle */
-	if (self->issue->type == IRDA_ACTISYS_DONGLE)
-		qos->baud_rate.bits &= ~IR_38400;
-	
-	qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
-}
-
-static void actisys_close(dongle_t *self)
-{
-	/* Power off the dongle */
-	self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function actisys_change_speed (task)
- *
- *    Change speed of the ACTiSYS IR-220L and IR-220L+ type IrDA dongles.
- *    To cycle through the available baud rates, pulse RTS low for a few us.
- *
- *	First, we reset the dongle to always start from a known state.
- *	Then, we cycle through the speeds by pulsing RTS low and then up.
- *	The dongle allow us to pulse quite fast, se we can set speed in one go,
- * which is must faster ( < 100 us) and less complex than what is found
- * in some other dongle drivers...
- *	Note that even if the new speed is the same as the current speed,
- * we reassert the speed. This make sure that things are all right,
- * and it's fast anyway...
- *	By the way, this function will work for both type of dongles,
- * because the additional speed is at the end of the sequence...
- */
-static int actisys_change_speed(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	__u32 speed = (__u32) task->param;	/* Target speed */
-	int ret = 0;
-	int i = 0;
-
-        IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __FUNCTION__, speed, 
-		   self->speed);
-
-	/* Go to a known state by reseting the dongle */
-
-	/* Reset the dongle : set DTR low for 10 us */
-	self->set_dtr_rts(self->dev, FALSE, TRUE);
-	udelay(MIN_DELAY);
-
-	/* Go back to normal mode (we are now at 9600 b/s) */
-	self->set_dtr_rts(self->dev, TRUE, TRUE);
- 
-	/* 
-	 * Now, we can set the speed requested. Send RTS pulses until we
-         * reach the target speed 
-	 */
-	for (i=0; i<MAX_SPEEDS; i++) {
-		if (speed == baud_rates[i]) {
-			self->speed = baud_rates[i];
-			break;
-		}
-		/* Make sure previous pulse is finished */
-		udelay(MIN_DELAY);
-
-		/* Set RTS low for 10 us */
-		self->set_dtr_rts(self->dev, TRUE, FALSE);
-		udelay(MIN_DELAY);
-
-		/* Set RTS high for 10 us */
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-	}
-
-	/* Check if life is sweet... */
-	if (i >= MAX_SPEEDS)
-		ret = -1;  /* This should not happen */
-
-	/* Basta lavoro, on se casse d'ici... */
-	irda_task_next_state(task, IRDA_TASK_DONE);
-
-	return ret;
-}
-
-/*
- * Function actisys_reset (task)
- *
- *      Reset the Actisys type dongle. Warning, this function must only be
- *      called with a process context!
- *
- * We need to do two things in this function :
- *	o first make sure that the dongle is in a state where it can operate
- *	o second put the dongle in a know state
- *
- *	The dongle is powered of the RTS and DTR lines. In the dongle, there
- * is a big capacitor to accommodate the current spikes. This capacitor
- * takes a least 50 ms to be charged. In theory, the Bios set those lines
- * up, so by the time we arrive here we should be set. It doesn't hurt
- * to be on the conservative side, so we will wait...
- *	Then, we set the speed to 9600 b/s to get in a known state (see in
- * change_speed for details). It is needed because the IrDA stack
- * has tried to set the speed immediately after our first return,
- * so before we can be sure the dongle is up and running.
- */
-static int actisys_reset(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	int ret = 0;
-
-	IRDA_ASSERT(task != NULL, return -1;);
-
-	self->reset_task = task;
-
-	switch (task->state) {
-	case IRDA_TASK_INIT:
-		/* Set both DTR & RTS to power up the dongle */
-		/* In theory redundant with power up in actisys_open() */
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-		
-		/* Sleep 50 ms to make sure capacitor is charged */
-		ret = msecs_to_jiffies(50);
-		irda_task_next_state(task, IRDA_TASK_WAIT);
-		break;
-	case IRDA_TASK_WAIT:			
-		/* Reset the dongle : set DTR low for 10 us */
-		self->set_dtr_rts(self->dev, FALSE, TRUE);
-		udelay(MIN_DELAY);
-
-		/* Go back to normal mode */
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-	
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->reset_task = NULL;
-		self->speed = 9600;	/* That's the default */
-		break;
-	default:
-		IRDA_ERROR("%s(), unknown state %d\n",
-			   __FUNCTION__, task->state);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->reset_task = NULL;
-		ret = -1;
-		break;
-	}
-	return ret;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no> - Jean Tourrilhes <jt@hpl.hp.com>");
-MODULE_DESCRIPTION("ACTiSYS IR-220L and IR-220L+ dongle driver");	
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-2"); /* IRDA_ACTISYS_DONGLE */
-MODULE_ALIAS("irda-dongle-3"); /* IRDA_ACTISYS_PLUS_DONGLE */
-
-		
-/*
- * Function init_module (void)
- *
- *    Initialize Actisys module
- *
- */
-module_init(actisys_init);
-
-/*
- * Function cleanup_module (void)
- *
- *    Cleanup Actisys module
- *
- */
-module_exit(actisys_cleanup);
diff --git a/drivers/net/irda/ep7211_ir.c b/drivers/net/irda/ep7211_ir.c
deleted file mode 100644
index 4cba38f7e4a8..000000000000
--- a/drivers/net/irda/ep7211_ir.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * IR port driver for the Cirrus Logic EP7211 processor.
- *
- * Copyright 2001, Blue Mug Inc.  All rights reserved.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-
-#define MIN_DELAY 25      /* 15 us, but wait a little more to be sure */
-#define MAX_DELAY 10000   /* 1 ms */
-
-static void ep7211_ir_open(dongle_t *self, struct qos_info *qos);
-static void ep7211_ir_close(dongle_t *self);
-static int  ep7211_ir_change_speed(struct irda_task *task);
-static int  ep7211_ir_reset(struct irda_task *task);
-
-static DEFINE_SPINLOCK(ep7211_lock);
-
-static struct dongle_reg dongle = {
-	.type = IRDA_EP7211_IR,
-	.open = ep7211_ir_open,
-	.close = ep7211_ir_close,
-	.reset = ep7211_ir_reset,
-	.change_speed = ep7211_ir_change_speed,
-	.owner = THIS_MODULE,
-};
-
-static void ep7211_ir_open(dongle_t *self, struct qos_info *qos)
-{
-	unsigned int syscon1, flags;
-
-	spin_lock_irqsave(&ep7211_lock, flags);
-
-	/* Turn on the SIR encoder. */
-	syscon1 = clps_readl(SYSCON1);
-	syscon1 |= SYSCON1_SIREN;
-	clps_writel(syscon1, SYSCON1);
-
-	/* XXX: We should disable modem status interrupts on the first
-		UART (interrupt #14). */
-
-	spin_unlock_irqrestore(&ep7211_lock, flags);
-}
-
-static void ep7211_ir_close(dongle_t *self)
-{
-	unsigned int syscon1, flags;
-
-	spin_lock_irqsave(&ep7211_lock, flags);
-
-	/* Turn off the SIR encoder. */
-	syscon1 = clps_readl(SYSCON1);
-	syscon1 &= ~SYSCON1_SIREN;
-	clps_writel(syscon1, SYSCON1);
-
-	/* XXX: If we've disabled the modem status interrupts, we should
-		reset them back to their original state. */
-
-	spin_unlock_irqrestore(&ep7211_lock, flags);
-}
-
-/*
- * Function ep7211_ir_change_speed (task)
- *
- *    Change speed of the EP7211 I/R port. We don't really have to do anything
- *    for the EP7211 as long as the rate is being changed at the serial port
- *    level.
- */
-static int ep7211_ir_change_speed(struct irda_task *task)
-{
-	irda_task_next_state(task, IRDA_TASK_DONE);
-	return 0;
-}
-
-/*
- * Function ep7211_ir_reset (task)
- *
- *      Reset the EP7211 I/R. We don't really have to do anything.
- *
- */
-static int ep7211_ir_reset(struct irda_task *task)
-{
-	irda_task_next_state(task, IRDA_TASK_DONE);
-	return 0;
-}
-
-/*
- * Function ep7211_ir_init(void)
- *
- *    Initialize EP7211 I/R module
- *
- */
-static int __init ep7211_ir_init(void)
-{
-	return irda_device_register_dongle(&dongle);
-}
-
-/*
- * Function ep7211_ir_cleanup(void)
- *
- *    Cleanup EP7211 I/R module
- *
- */
-static void __exit ep7211_ir_cleanup(void)
-{
-	irda_device_unregister_dongle(&dongle);
-}
-
-MODULE_AUTHOR("Jon McClintock <jonm@bluemug.com>");
-MODULE_DESCRIPTION("EP7211 I/R driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-8"); /* IRDA_EP7211_IR */
-		
-module_init(ep7211_ir_init);
-module_exit(ep7211_ir_cleanup);
diff --git a/drivers/net/irda/esi.c b/drivers/net/irda/esi.c
deleted file mode 100644
index d3a61af6402d..000000000000
--- a/drivers/net/irda/esi.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      esi.c
- * Version:       1.5
- * Description:   Driver for the Extended Systems JetEye PC dongle
- * Status:        Experimental.
- * Author:        Dag Brattli <dagb@cs.uit.no>
- * Created at:    Sat Feb 21 18:54:38 1998
- * Modified at:   Fri Dec 17 09:14:04 1999
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 1999 Dag Brattli, <dagb@cs.uit.no>,
- *     Copyright (c) 1998 Thomas Davis, <ratbert@radiks.net>,
- *     All Rights Reserved.
- *     
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- * 
- *     This program is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *     GNU General Public License for more details.
- * 
- *     You should have received a copy of the GNU General Public License 
- *     along with this program; if not, write to the Free Software 
- *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
- *     MA 02111-1307 USA
- *     
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static void esi_open(dongle_t *self, struct qos_info *qos);
-static void esi_close(dongle_t *self);
-static int  esi_change_speed(struct irda_task *task);
-static int  esi_reset(struct irda_task *task);
-
-static struct dongle_reg dongle = {
-	.type = IRDA_ESI_DONGLE,
-	.open = esi_open,
-	.close = esi_close,
-	.reset = esi_reset,
-	.change_speed = esi_change_speed,
-	.owner = THIS_MODULE,
-};
-
-static int __init esi_init(void)
-{
-	return irda_device_register_dongle(&dongle);
-}
-
-static void __exit esi_cleanup(void)
-{
-	irda_device_unregister_dongle(&dongle);
-}
-
-static void esi_open(dongle_t *self, struct qos_info *qos)
-{
-	qos->baud_rate.bits &= IR_9600|IR_19200|IR_115200;
-	qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
-}
-
-static void esi_close(dongle_t *dongle)
-{		
-	/* Power off dongle */
-	dongle->set_dtr_rts(dongle->dev, FALSE, FALSE);
-}
-
-/*
- * Function esi_change_speed (task)
- *
- *    Set the speed for the Extended Systems JetEye PC ESI-9680 type dongle
- *
- */
-static int esi_change_speed(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	__u32 speed = (__u32) task->param;
-	int dtr, rts;
-	
-	switch (speed) {
-	case 19200:
-		dtr = TRUE;
-		rts = FALSE;
-		break;
-	case 115200:
-		dtr = rts = TRUE;
-		break;
-	case 9600:
-	default:
-		dtr = FALSE;
-		rts = TRUE;
-		break;
-	}
-
-	/* Change speed of dongle */
-	self->set_dtr_rts(self->dev, dtr, rts);
-	self->speed = speed;
-
-	irda_task_next_state(task, IRDA_TASK_DONE);
-
-	return 0;
-}
-
-/*
- * Function esi_reset (task)
- *
- *    Reset dongle;
- *
- */
-static int esi_reset(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	
-	self->set_dtr_rts(self->dev, FALSE, FALSE);
-	irda_task_next_state(task, IRDA_TASK_DONE);
-
-	return 0;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
-MODULE_DESCRIPTION("Extended Systems JetEye PC dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-1"); /* IRDA_ESI_DONGLE */
-
-/*
- * Function init_module (void)
- *
- *    Initialize ESI module
- *
- */
-module_init(esi_init);
-
-/*
- * Function cleanup_module (void)
- *
- *    Cleanup ESI module
- *
- */
-module_exit(esi_cleanup);
-
diff --git a/drivers/net/irda/girbil.c b/drivers/net/irda/girbil.c
deleted file mode 100644
index 1f57391a618b..000000000000
--- a/drivers/net/irda/girbil.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      girbil.c
- * Version:       1.2
- * Description:   Implementation for the Greenwich GIrBIL dongle
- * Status:        Experimental.
- * Author:        Dag Brattli <dagb@cs.uit.no>
- * Created at:    Sat Feb  6 21:02:33 1999
- * Modified at:   Fri Dec 17 09:13:20 1999
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
- *      
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- *  
- *     Neither Dag Brattli nor University of Tromsø admit liability nor
- *     provide warranty for any of this software. This material is 
- *     provided "AS-IS" and at no charge.
- *     
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static int  girbil_reset(struct irda_task *task);
-static void girbil_open(dongle_t *self, struct qos_info *qos);
-static void girbil_close(dongle_t *self);
-static int  girbil_change_speed(struct irda_task *task);
-
-/* Control register 1 */
-#define GIRBIL_TXEN    0x01 /* Enable transmitter */
-#define GIRBIL_RXEN    0x02 /* Enable receiver */
-#define GIRBIL_ECAN    0x04 /* Cancel self emmited data */
-#define GIRBIL_ECHO    0x08 /* Echo control characters */
-
-/* LED Current Register (0x2) */
-#define GIRBIL_HIGH    0x20
-#define GIRBIL_MEDIUM  0x21
-#define GIRBIL_LOW     0x22
-
-/* Baud register (0x3) */
-#define GIRBIL_2400    0x30
-#define GIRBIL_4800    0x31	
-#define GIRBIL_9600    0x32
-#define GIRBIL_19200   0x33
-#define GIRBIL_38400   0x34	
-#define GIRBIL_57600   0x35	
-#define GIRBIL_115200  0x36
-
-/* Mode register (0x4) */
-#define GIRBIL_IRDA    0x40
-#define GIRBIL_ASK     0x41
-
-/* Control register 2 (0x5) */
-#define GIRBIL_LOAD    0x51 /* Load the new baud rate value */
-
-static struct dongle_reg dongle = {
-	.type = IRDA_GIRBIL_DONGLE,
-	.open = girbil_open,
-	.close = girbil_close,
-	.reset = girbil_reset,
-	.change_speed = girbil_change_speed,
-	.owner = THIS_MODULE,
-};
-
-static int __init girbil_init(void)
-{
-	return irda_device_register_dongle(&dongle);
-}
-
-static void __exit girbil_cleanup(void)
-{
-	irda_device_unregister_dongle(&dongle);
-}
-
-static void girbil_open(dongle_t *self, struct qos_info *qos)
-{
-	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
-	qos->min_turn_time.bits = 0x03;
-}
-
-static void girbil_close(dongle_t *self)
-{
-	/* Power off dongle */
-	self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function girbil_change_speed (dev, speed)
- *
- *    Set the speed for the Girbil type dongle.
- *
- */
-static int girbil_change_speed(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	__u32 speed = (__u32) task->param;
-	__u8 control[2];
-	int ret = 0;
-
-	self->speed_task = task;
-
-	switch (task->state) {
-	case IRDA_TASK_INIT:
-		/* Need to reset the dongle and go to 9600 bps before
-                   programming */
-		if (irda_task_execute(self, girbil_reset, NULL, task, 
-				      (void *) speed))
-		{
-			/* Dongle need more time to reset */
-			irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
-			/* Give reset 1 sec to finish */
-			ret = msecs_to_jiffies(1000);
-		}
-		break;
-	case IRDA_TASK_CHILD_WAIT:
-		IRDA_WARNING("%s(), resetting dongle timed out!\n",
-			     __FUNCTION__);
-		ret = -1;
-		break;
-	case IRDA_TASK_CHILD_DONE:
-		/* Set DTR and Clear RTS to enter command mode */
-		self->set_dtr_rts(self->dev, FALSE, TRUE);
-
-		switch (speed) {
-		case 9600:
-		default:
-			control[0] = GIRBIL_9600;
-			break;
-		case 19200:
-			control[0] = GIRBIL_19200;
-			break;
-		case 34800:
-			control[0] = GIRBIL_38400;
-			break;
-		case 57600:
-			control[0] = GIRBIL_57600;
-			break;
-		case 115200:
-			control[0] = GIRBIL_115200;
-			break;
-		}
-		control[1] = GIRBIL_LOAD;
-		
-		/* Write control bytes */
-		self->write(self->dev, control, 2);
-		irda_task_next_state(task, IRDA_TASK_WAIT);
-		ret = msecs_to_jiffies(100);
-		break;
-	case IRDA_TASK_WAIT:
-		/* Go back to normal mode */
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->speed_task = NULL;
-		break;
-	default:
-		IRDA_ERROR("%s(), unknown state %d\n",
-			   __FUNCTION__, task->state);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->speed_task = NULL;
-		ret = -1;
-		break;
-	}
-	return ret;
-}
-
-/*
- * Function girbil_reset (driver)
- *
- *      This function resets the girbil dongle.
- *
- *      Algorithm:
- *    	  0. set RTS, and wait at least 5 ms 
- *        1. clear RTS 
- */
-static int girbil_reset(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	__u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
-	int ret = 0;
-
-	self->reset_task = task;
-
-	switch (task->state) {
-	case IRDA_TASK_INIT:
-		/* Reset dongle */
-		self->set_dtr_rts(self->dev, TRUE, FALSE);
-		irda_task_next_state(task, IRDA_TASK_WAIT1);
-		/* Sleep at least 5 ms */
-		ret = msecs_to_jiffies(20);
-		break;
-	case IRDA_TASK_WAIT1:
-		/* Set DTR and clear RTS to enter command mode */
-		self->set_dtr_rts(self->dev, FALSE, TRUE);
-		irda_task_next_state(task, IRDA_TASK_WAIT2);
-		ret = msecs_to_jiffies(20);
-		break;
-	case IRDA_TASK_WAIT2:
-		/* Write control byte */
-		self->write(self->dev, &control, 1);
-		irda_task_next_state(task, IRDA_TASK_WAIT3);
-		ret = msecs_to_jiffies(20);
-		break;
-	case IRDA_TASK_WAIT3:
-		/* Go back to normal mode */
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->reset_task = NULL;
-		break;
-	default:
-		IRDA_ERROR("%s(), unknown state %d\n",
-			   __FUNCTION__, task->state);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->reset_task = NULL;
-		ret = -1;
-		break;
-	}
-	return ret;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
-MODULE_DESCRIPTION("Greenwich GIrBIL dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-4"); /* IRDA_GIRBIL_DONGLE */
-	
-/*
- * Function init_module (void)
- *
- *    Initialize Girbil module
- *
- */
-module_init(girbil_init);
-
-/*
- * Function cleanup_module (void)
- *
- *    Cleanup Girbil module
- *
- */
-module_exit(girbil_cleanup);
-
diff --git a/drivers/net/irda/litelink.c b/drivers/net/irda/litelink.c
deleted file mode 100644
index 7db11431d0f4..000000000000
--- a/drivers/net/irda/litelink.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      litelink.c
- * Version:       1.1
- * Description:   Driver for the Parallax LiteLink dongle
- * Status:        Stable
- * Author:        Dag Brattli <dagb@cs.uit.no>
- * Created at:    Fri May  7 12:50:33 1999
- * Modified at:   Fri Dec 17 09:14:23 1999
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
- *     
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- * 
- *     This program is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *     GNU General Public License for more details.
- * 
- *     You should have received a copy of the GNU General Public License 
- *     along with this program; if not, write to the Free Software 
- *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
- *     MA 02111-1307 USA
- *     
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-#define MIN_DELAY 25      /* 15 us, but wait a little more to be sure */
-#define MAX_DELAY 10000   /* 1 ms */
-
-static void litelink_open(dongle_t *self, struct qos_info *qos);
-static void litelink_close(dongle_t *self);
-static int  litelink_change_speed(struct irda_task *task);
-static int  litelink_reset(struct irda_task *task);
-
-/* These are the baudrates supported */
-static __u32 baud_rates[] = { 115200, 57600, 38400, 19200, 9600 };
-
-static struct dongle_reg dongle = {
-	.type = IRDA_LITELINK_DONGLE,
-	.open = litelink_open,
-	.close = litelink_close,
-	.reset = litelink_reset,
-	.change_speed = litelink_change_speed,
-	.owner = THIS_MODULE,
-};
-
-static int __init litelink_init(void)
-{
-	return irda_device_register_dongle(&dongle);
-}
-
-static void __exit litelink_cleanup(void)
-{
-	irda_device_unregister_dongle(&dongle);
-}
-
-static void litelink_open(dongle_t *self, struct qos_info *qos)
-{
-	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
-	qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
-}
-
-static void litelink_close(dongle_t *self)
-{
-	/* Power off dongle */
-	self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function litelink_change_speed (task)
- *
- *    Change speed of the Litelink dongle. To cycle through the available 
- *    baud rates, pulse RTS low for a few ms.  
- */
-static int litelink_change_speed(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	__u32 speed = (__u32) task->param;
-        int i;
-	
-	/* Clear RTS to reset dongle */
-	self->set_dtr_rts(self->dev, TRUE, FALSE);
-
-	/* Sleep a minimum of 15 us */
-	udelay(MIN_DELAY);
-
-	/* Go back to normal mode */
-	self->set_dtr_rts(self->dev, TRUE, TRUE);
-	
-	/* Sleep a minimum of 15 us */
-	udelay(MIN_DELAY);
-	
-	/* Cycle through avaiable baudrates until we reach the correct one */
-	for (i=0; i<5 && baud_rates[i] != speed; i++) {
-		/* Set DTR, clear RTS */
-		self->set_dtr_rts(self->dev, FALSE, TRUE);
-		
-		/* Sleep a minimum of 15 us */
-		udelay(MIN_DELAY);
-		
-		/* Set DTR, Set RTS */
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-		
-		/* Sleep a minimum of 15 us */
-		udelay(MIN_DELAY);
-        }
-	irda_task_next_state(task, IRDA_TASK_DONE);
-
-	return 0;
-}
-
-/*
- * Function litelink_reset (task)
- *
- *      Reset the Litelink type dongle.
- *
- */
-static int litelink_reset(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-
-	/* Power on dongle */
-	self->set_dtr_rts(self->dev, TRUE, TRUE);
-
-	/* Sleep a minimum of 15 us */
-	udelay(MIN_DELAY);
-
-	/* Clear RTS to reset dongle */
-	self->set_dtr_rts(self->dev, TRUE, FALSE);
-
-	/* Sleep a minimum of 15 us */
-	udelay(MIN_DELAY);
-
-	/* Go back to normal mode */
-	self->set_dtr_rts(self->dev, TRUE, TRUE);
-	
-	/* Sleep a minimum of 15 us */
-	udelay(MIN_DELAY);
-
-	/* This dongles speed defaults to 115200 bps */
-	self->speed = 115200;
-
-	irda_task_next_state(task, IRDA_TASK_DONE);
-
-	return 0;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
-MODULE_DESCRIPTION("Parallax Litelink dongle driver");	
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-5"); /* IRDA_LITELINK_DONGLE */
-		
-/*
- * Function init_module (void)
- *
- *    Initialize Litelink module
- *
- */
-module_init(litelink_init);
-
-/*
- * Function cleanup_module (void)
- *
- *    Cleanup Litelink module
- *
- */
-module_exit(litelink_cleanup);
diff --git a/drivers/net/irda/ma600.c b/drivers/net/irda/ma600.c
deleted file mode 100644
index f5e6836667fd..000000000000
--- a/drivers/net/irda/ma600.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      ma600.c
- * Version:       0.1
- * Description:   Implementation of the MA600 dongle
- * Status:        Experimental.
- * Author:        Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95
- * Created at:    Sat Jun 10 20:02:35 2000
- * Modified at:   
- * Modified by:   
- *
- * Note: very thanks to Mr. Maru Wang <maru@mobileaction.com.tw> for providing 
- *       information on the MA600 dongle
- * 
- *     Copyright (c) 2000 Leung, All Rights Reserved.
- *      
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- *  
- *     This program is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *     GNU General Public License for more details.
- * 
- *     You should have received a copy of the GNU General Public License 
- *     along with this program; if not, write to the Free Software 
- *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
- *     MA 02111-1307 USA
- *     
- ********************************************************************/
-
-/* define this macro for release version */
-//#define NDEBUG
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-#ifndef NDEBUG
-	#undef IRDA_DEBUG
-	#define IRDA_DEBUG(n, args...) (printk(KERN_DEBUG args))
-
-	#undef ASSERT
-	#define ASSERT(expr, func) \
-	if(!(expr)) { \
-	        printk( "Assertion failed! %s,%s,%s,line=%d\n",\
-        	#expr,__FILE__,__FUNCTION__,__LINE__); \
-	        func}
-#endif
-
-/* convert hex value to ascii hex */
-static const char hexTbl[] = "0123456789ABCDEF";
-
-
-static void ma600_open(dongle_t *self, struct qos_info *qos);
-static void ma600_close(dongle_t *self);
-static int  ma600_change_speed(struct irda_task *task);
-static int  ma600_reset(struct irda_task *task);
-
-/* control byte for MA600 */
-#define MA600_9600	0x00
-#define MA600_19200	0x01
-#define MA600_38400	0x02
-#define MA600_57600	0x03
-#define MA600_115200	0x04
-#define MA600_DEV_ID1	0x05
-#define MA600_DEV_ID2	0x06
-#define MA600_2400	0x08
-
-static struct dongle_reg dongle = {
-	.type = IRDA_MA600_DONGLE,
-	.open = ma600_open,
-	.close = ma600_close,
-	.reset = ma600_reset,
-	.change_speed = ma600_change_speed,
-	.owner = THIS_MODULE,
-};
-
-static int __init ma600_init(void)
-{
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-	return irda_device_register_dongle(&dongle);
-}
-
-static void __exit ma600_cleanup(void)
-{
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-	irda_device_unregister_dongle(&dongle);
-}
-
-/*
-	Power on:
-		(0) Clear RTS and DTR for 1 second
-		(1) Set RTS and DTR for 1 second
-		(2) 9600 bps now
-	Note: assume RTS, DTR are clear before
-*/
-static void ma600_open(dongle_t *self, struct qos_info *qos)
-{
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-
-	qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400
-				|IR_57600|IR_115200;
-	qos->min_turn_time.bits = 0x01;		/* Needs at least 1 ms */	
-	irda_qos_bits_to_value(qos);
-
-	//self->set_dtr_rts(self->dev, FALSE, FALSE);
-	// should wait 1 second
-
-	self->set_dtr_rts(self->dev, TRUE, TRUE);
-	// should wait 1 second
-}
-
-static void ma600_close(dongle_t *self)
-{
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-
-	/* Power off dongle */
-	self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-static __u8 get_control_byte(__u32 speed)
-{
-	__u8 byte;
-
-	switch (speed) {
-	default:
-	case 115200:
-		byte = MA600_115200;
-		break;
-	case 57600:
-		byte = MA600_57600;
-		break;
-	case 38400:
-		byte = MA600_38400;
-		break;
-	case 19200:
-		byte = MA600_19200;
-		break;
-	case 9600:
-		byte = MA600_9600;
-		break;
-	case 2400:
-		byte = MA600_2400;
-		break;
-	}
-
-	return byte;
-}
-
-/*
- * Function ma600_change_speed (dev, state, speed)
- *
- *    Set the speed for the MA600 type dongle. Warning, this 
- *    function must be called with a process context!
- *
- *    Algorithm
- *    1. Reset
- *    2. clear RTS, set DTR and wait for 1ms
- *    3. send Control Byte to the MA600 through TXD to set new baud rate
- *       wait until the stop bit of Control Byte is sent (for 9600 baud rate, 
- *       it takes about 10 msec)
- *    4. set RTS, set DTR (return to NORMAL Operation)
- *    5. wait at least 10 ms, new setting (baud rate, etc) takes effect here 
- *       after
- */
-static int ma600_change_speed(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	__u32 speed = (__u32) task->param;
-	static __u8 byte;
-	__u8 byte_echo;
-	int ret = 0;
-	
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-
-	ASSERT(task != NULL, return -1;);
-
-	if (self->speed_task && self->speed_task != task) {
-		IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__);
-		return msecs_to_jiffies(10);
-	} else {
-		self->speed_task = task;
-	}
-
-	switch (task->state) {
-	case IRDA_TASK_INIT:
-	case IRDA_TASK_CHILD_INIT:
-		/* 
-		 * Need to reset the dongle and go to 9600 bps before
-                 * programming 
-		 */
-		if (irda_task_execute(self, ma600_reset, NULL, task, 
-				      (void *) speed)) {
-			/* Dongle need more time to reset */
-			irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-	
-			/* give 1 second to finish */
-			ret = msecs_to_jiffies(1000);
-		} else {
-			irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
-		}
-		break;
-
-	case IRDA_TASK_CHILD_WAIT:
-		IRDA_WARNING("%s(), resetting dongle timed out!\n",
-			     __FUNCTION__);
-		ret = -1;
-		break;
-
-	case IRDA_TASK_CHILD_DONE:
-		/* Set DTR, Clear RTS */
-		self->set_dtr_rts(self->dev, TRUE, FALSE);
-	
-		ret = msecs_to_jiffies(1);		/* Sleep 1 ms */
-		irda_task_next_state(task, IRDA_TASK_WAIT);
-		break;
-
-	case IRDA_TASK_WAIT:
-		speed = (__u32) task->param;
-		byte = get_control_byte(speed);
-
-		/* Write control byte */
-		self->write(self->dev, &byte, sizeof(byte));
-		
-		irda_task_next_state(task, IRDA_TASK_WAIT1);
-
-		/* Wait at least 10 ms */
-		ret = msecs_to_jiffies(15);
-		break;
-
-	case IRDA_TASK_WAIT1:
-		/* Read control byte echo */
-		self->read(self->dev, &byte_echo, sizeof(byte_echo));
-
-		if(byte != byte_echo) {
-			/* if control byte != echo, I don't know what to do */
-			printk(KERN_WARNING "%s() control byte written != read!\n", __FUNCTION__);
-			printk(KERN_WARNING "control byte = 0x%c%c\n", 
-			       hexTbl[(byte>>4)&0x0f], hexTbl[byte&0x0f]);
-			printk(KERN_WARNING "byte echo = 0x%c%c\n", 
-			       hexTbl[(byte_echo>>4) & 0x0f], 
-			       hexTbl[byte_echo & 0x0f]);
-		#ifndef NDEBUG
-		} else {
-			IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__);
-		#endif
-		}
-
-		/* Set DTR, Set RTS */
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-
-		irda_task_next_state(task, IRDA_TASK_WAIT2);
-
-		/* Wait at least 10 ms */
-		ret = msecs_to_jiffies(10);
-		break;
-
-	case IRDA_TASK_WAIT2:
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->speed_task = NULL;
-		break;
-
-	default:
-		IRDA_ERROR("%s(), unknown state %d\n",
-			   __FUNCTION__, task->state);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->speed_task = NULL;
-		ret = -1;
-		break;
-	}
-	return ret;
-}
-
-/*
- * Function ma600_reset (driver)
- *
- *      This function resets the ma600 dongle. Warning, this function 
- *      must be called with a process context!! 
- *
- *      Algorithm:
- *    	  0. DTR=0, RTS=1 and wait 10 ms
- *    	  1. DTR=1, RTS=1 and wait 10 ms
- *        2. 9600 bps now
- */
-int ma600_reset(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	int ret = 0;
-
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-
-	ASSERT(task != NULL, return -1;);
-
-	if (self->reset_task && self->reset_task != task) {
-		IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__);
-		return msecs_to_jiffies(10);
-	} else
-		self->reset_task = task;
-	
-	switch (task->state) {
-	case IRDA_TASK_INIT:
-		/* Clear DTR and Set RTS */
-		self->set_dtr_rts(self->dev, FALSE, TRUE);
-		irda_task_next_state(task, IRDA_TASK_WAIT1);
-		ret = msecs_to_jiffies(10);		/* Sleep 10 ms */
-		break;
-	case IRDA_TASK_WAIT1:
-		/* Set DTR and RTS */
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-		irda_task_next_state(task, IRDA_TASK_WAIT2);
-		ret = msecs_to_jiffies(10);		/* Sleep 10 ms */
-		break;
-	case IRDA_TASK_WAIT2:
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->reset_task = NULL;
-		break;
-	default:
-		IRDA_ERROR("%s(), unknown state %d\n",
-			   __FUNCTION__, task->state);
-		irda_task_next_state(task, IRDA_TASK_DONE);		
-		self->reset_task = NULL;
-		ret = -1;
-	}
-	return ret;
-}
-
-MODULE_AUTHOR("Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95");
-MODULE_DESCRIPTION("MA600 dongle driver version 0.1");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-11"); /* IRDA_MA600_DONGLE */
-		
-/*
- * Function init_module (void)
- *
- *    Initialize MA600 module
- *
- */
-module_init(ma600_init);
-
-/*
- * Function cleanup_module (void)
- *
- *    Cleanup MA600 module
- *
- */
-module_exit(ma600_cleanup);
-
diff --git a/drivers/net/irda/mcp2120.c b/drivers/net/irda/mcp2120.c
deleted file mode 100644
index 5e6199eeef4f..000000000000
--- a/drivers/net/irda/mcp2120.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*********************************************************************
- *            
- *    
- * Filename:      mcp2120.c
- * Version:       1.0
- * Description:   Implementation for the MCP2120 (Microchip)
- * Status:        Experimental.
- * Author:        Felix Tang (tangf@eyetap.org)
- * Created at:    Sun Mar 31 19:32:12 EST 2002
- * Based on code by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 2002 Felix Tang, All Rights Reserved.
- *      
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- *  
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static int  mcp2120_reset(struct irda_task *task);
-static void mcp2120_open(dongle_t *self, struct qos_info *qos);
-static void mcp2120_close(dongle_t *self);
-static int  mcp2120_change_speed(struct irda_task *task);
-
-#define MCP2120_9600    0x87
-#define MCP2120_19200   0x8B
-#define MCP2120_38400   0x85
-#define MCP2120_57600   0x83
-#define MCP2120_115200  0x81
-
-#define MCP2120_COMMIT  0x11
-
-static struct dongle_reg dongle = {
-	.type = IRDA_MCP2120_DONGLE,
-	.open = mcp2120_open,
-	.close = mcp2120_close,
-	.reset = mcp2120_reset,
-	.change_speed = mcp2120_change_speed,
-	.owner = THIS_MODULE,
-};
-
-static int __init mcp2120_init(void)
-{
-	return irda_device_register_dongle(&dongle);
-}
-
-static void __exit mcp2120_cleanup(void)
-{
-	irda_device_unregister_dongle(&dongle);
-}
-
-static void mcp2120_open(dongle_t *self, struct qos_info *qos)
-{
-	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
-	qos->min_turn_time.bits = 0x01;
-}
-
-static void mcp2120_close(dongle_t *self)
-{
-	/* Power off dongle */
-        /* reset and inhibit mcp2120 */
-	self->set_dtr_rts(self->dev, TRUE, TRUE);
-	//self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function mcp2120_change_speed (dev, speed)
- *
- *    Set the speed for the MCP2120.
- *
- */
-static int mcp2120_change_speed(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	__u32 speed = (__u32) task->param;
-	__u8 control[2];
-	int ret = 0;
-
-	self->speed_task = task;
-
-	switch (task->state) {
-	case IRDA_TASK_INIT:
-		/* Need to reset the dongle and go to 9600 bps before
-                   programming */
-                //printk("Dmcp2120_change_speed irda_task_init\n");
-		if (irda_task_execute(self, mcp2120_reset, NULL, task, 
-				      (void *) speed))
-		{
-			/* Dongle need more time to reset */
-			irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
-			/* Give reset 1 sec to finish */
-			ret = msecs_to_jiffies(1000);
-		}
-		break;
-	case IRDA_TASK_CHILD_WAIT:
-		IRDA_WARNING("%s(), resetting dongle timed out!\n",
-			     __FUNCTION__);
-		ret = -1;
-		break;
-	case IRDA_TASK_CHILD_DONE:
-		/* Set DTR to enter command mode */
-		self->set_dtr_rts(self->dev, TRUE, FALSE);
-                udelay(500);
-
-		switch (speed) {
-		case 9600:
-		default:
-			control[0] = MCP2120_9600;
-                        //printk("mcp2120 9600\n");
-			break;
-		case 19200:
-			control[0] = MCP2120_19200;
-                        //printk("mcp2120 19200\n");
-			break;
-		case 34800:
-			control[0] = MCP2120_38400;
-                        //printk("mcp2120 38400\n");
-			break;
-		case 57600:
-			control[0] = MCP2120_57600;
-                        //printk("mcp2120 57600\n");
-			break;
-		case 115200:
-                        control[0] = MCP2120_115200;
-                        //printk("mcp2120 115200\n");
-			break;
-		}
-	        control[1] = MCP2120_COMMIT;
-	
-		/* Write control bytes */
-                self->write(self->dev, control, 2);
- 
-                irda_task_next_state(task, IRDA_TASK_WAIT);
-		ret = msecs_to_jiffies(100);
-                //printk("mcp2120_change_speed irda_child_done\n");
-		break;
-	case IRDA_TASK_WAIT:
-		/* Go back to normal mode */
-		self->set_dtr_rts(self->dev, FALSE, FALSE);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->speed_task = NULL;
-                //printk("mcp2120_change_speed irda_task_wait\n");
-		break;
-	default:
-		IRDA_ERROR("%s(), unknown state %d\n",
-			   __FUNCTION__, task->state);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->speed_task = NULL;
-		ret = -1;
-		break;
-	}
-	return ret;
-}
-
-/*
- * Function mcp2120_reset (driver)
- *
- *      This function resets the mcp2120 dongle.
- *      
- *      Info: -set RTS to reset mcp2120
- *            -set DTR to set mcp2120 software command mode
- *            -mcp2120 defaults to 9600 baud after reset
- *
- *      Algorithm:
- *      0. Set RTS to reset mcp2120.
- *      1. Clear RTS and wait for device reset timer of 30 ms (max).
- *      
- */
-
-
-static int mcp2120_reset(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	int ret = 0;
-
-	self->reset_task = task;
-
-	switch (task->state) {
-	case IRDA_TASK_INIT:
-                //printk("mcp2120_reset irda_task_init\n");
-		/* Reset dongle by setting RTS*/
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-		irda_task_next_state(task, IRDA_TASK_WAIT1);
-		ret = msecs_to_jiffies(50);
-		break;
-	case IRDA_TASK_WAIT1:
-                //printk("mcp2120_reset irda_task_wait1\n");
-                /* clear RTS and wait for at least 30 ms. */
-		self->set_dtr_rts(self->dev, FALSE, FALSE);
-		irda_task_next_state(task, IRDA_TASK_WAIT2);
-		ret = msecs_to_jiffies(50);
-		break;
-	case IRDA_TASK_WAIT2:
-                //printk("mcp2120_reset irda_task_wait2\n");
-		/* Go back to normal mode */
-		self->set_dtr_rts(self->dev, FALSE, FALSE);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->reset_task = NULL;
-		break;
-	default:
-		IRDA_ERROR("%s(), unknown state %d\n",
-			   __FUNCTION__, task->state);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->reset_task = NULL;
-		ret = -1;
-		break;
-	}
-	return ret;
-}
-
-MODULE_AUTHOR("Felix Tang <tangf@eyetap.org>");
-MODULE_DESCRIPTION("Microchip MCP2120");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-9"); /* IRDA_MCP2120_DONGLE */
-	
-/*
- * Function init_module (void)
- *
- *    Initialize MCP2120 module
- *
- */
-module_init(mcp2120_init);
-
-/*
- * Function cleanup_module (void)
- *
- *    Cleanup MCP2120 module
- *
- */
-module_exit(mcp2120_cleanup);
diff --git a/drivers/net/irda/old_belkin.c b/drivers/net/irda/old_belkin.c
deleted file mode 100644
index 26f81fd28371..000000000000
--- a/drivers/net/irda/old_belkin.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      old_belkin.c
- * Version:       1.1
- * Description:   Driver for the Belkin (old) SmartBeam dongle
- * Status:        Experimental...
- * Author:        Jean Tourrilhes <jt@hpl.hp.com>
- * Created at:    22/11/99
- * Modified at:   Fri Dec 17 09:13:32 1999
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 1999 Jean Tourrilhes, All Rights Reserved.
- *     
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- * 
- *     This program is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *     GNU General Public License for more details.
- * 
- *     You should have received a copy of the GNU General Public License 
- *     along with this program; if not, write to the Free Software 
- *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
- *     MA 02111-1307 USA
- *     
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-/*
- * Belkin is selling a dongle called the SmartBeam.
- * In fact, there is two hardware version of this dongle, of course with
- * the same name and looking the exactly same (grrr...).
- * I guess that I've got the old one, because inside I don't have
- * a jumper for IrDA/ASK...
- *
- * As far as I can make it from info on their web site, the old dongle 
- * support only 9600 b/s, which make our life much simpler as far as
- * the driver is concerned, but you might not like it very much ;-)
- * The new SmartBeam does 115 kb/s, and I've not tested it...
- *
- * Belkin claim that the correct driver for the old dongle (in Windows)
- * is the generic Parallax 9500a driver, but the Linux LiteLink driver
- * fails for me (probably because Linux-IrDA doesn't rate fallback),
- * so I created this really dumb driver...
- *
- * In fact, this driver doesn't do much. The only thing it does is to
- * prevent Linux-IrDA to use any other speed than 9600 b/s ;-) This
- * driver is called "old_belkin" so that when the new SmartBeam is supported
- * its driver can be called "belkin" instead of "new_belkin".
- *
- * Note : this driver was written without any info/help from Belkin,
- * so a lot of info here might be totally wrong. Blame me ;-)
- */
-
-/* Let's guess */
-#define MIN_DELAY 25      /* 15 us, but wait a little more to be sure */
-
-static void old_belkin_open(dongle_t *self, struct qos_info *qos);
-static void old_belkin_close(dongle_t *self);
-static int  old_belkin_change_speed(struct irda_task *task);
-static int  old_belkin_reset(struct irda_task *task);
-
-/* These are the baudrates supported */
-/* static __u32 baud_rates[] = { 9600 }; */
-
-static struct dongle_reg dongle = {
-	.type = IRDA_OLD_BELKIN_DONGLE,
-	.open = old_belkin_open,
-	.close = old_belkin_close,
-	.reset = old_belkin_reset,
-	.change_speed = old_belkin_change_speed,
-	.owner = THIS_MODULE,
-};
-
-static int __init old_belkin_init(void)
-{
-	return irda_device_register_dongle(&dongle);
-}
-
-static void __exit old_belkin_cleanup(void)
-{
-	irda_device_unregister_dongle(&dongle);
-}
-
-static void old_belkin_open(dongle_t *self, struct qos_info *qos)
-{
-	/* Not too fast, please... */
-	qos->baud_rate.bits &= IR_9600;
-	/* Needs at least 10 ms (totally wild guess, can do probably better) */
-	qos->min_turn_time.bits = 0x01;
-}
-
-static void old_belkin_close(dongle_t *self)
-{
-	/* Power off dongle */
-	self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function old_belkin_change_speed (task)
- *
- *    With only one speed available, not much to do...
- */
-static int old_belkin_change_speed(struct irda_task *task)
-{
-	irda_task_next_state(task, IRDA_TASK_DONE);
-
-	return 0;
-}
-
-/*
- * Function old_belkin_reset (task)
- *
- *      Reset the Old-Belkin type dongle.
- *
- */
-static int old_belkin_reset(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-
-	/* Power on dongle */
-	self->set_dtr_rts(self->dev, TRUE, TRUE);
-
-	/* Sleep a minimum of 15 us */
-	udelay(MIN_DELAY);
-
-	/* This dongles speed "defaults" to 9600 bps ;-) */
-	self->speed = 9600;
-
-	irda_task_next_state(task, IRDA_TASK_DONE);
-
-	return 0;
-}
-
-MODULE_AUTHOR("Jean Tourrilhes <jt@hpl.hp.com>");
-MODULE_DESCRIPTION("Belkin (old) SmartBeam dongle driver");	
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-7"); /* IRDA_OLD_BELKIN_DONGLE */
-
-/*
- * Function init_module (void)
- *
- *    Initialize Old-Belkin module
- *
- */
-module_init(old_belkin_init);
-
-/*
- * Function cleanup_module (void)
- *
- *    Cleanup Old-Belkin module
- *
- */
-module_exit(old_belkin_cleanup);
diff --git a/drivers/net/irda/tekram.c b/drivers/net/irda/tekram.c
deleted file mode 100644
index 9bfd2441adbf..000000000000
--- a/drivers/net/irda/tekram.c
+++ /dev/null
@@ -1,282 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      tekram.c
- * Version:       1.2
- * Description:   Implementation of the Tekram IrMate IR-210B dongle
- * Status:        Experimental.
- * Author:        Dag Brattli <dagb@cs.uit.no>
- * Created at:    Wed Oct 21 20:02:35 1998
- * Modified at:   Fri Dec 17 09:13:09 1999
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
- *      
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- *  
- *     Neither Dag Brattli nor University of Tromsø admit liability nor
- *     provide warranty for any of this software. This material is 
- *     provided "AS-IS" and at no charge.
- *     
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static void tekram_open(dongle_t *self, struct qos_info *qos);
-static void tekram_close(dongle_t *self);
-static int  tekram_change_speed(struct irda_task *task);
-static int  tekram_reset(struct irda_task *task);
-
-#define TEKRAM_115200 0x00
-#define TEKRAM_57600  0x01
-#define TEKRAM_38400  0x02
-#define TEKRAM_19200  0x03
-#define TEKRAM_9600   0x04
-
-#define TEKRAM_PW     0x10 /* Pulse select bit */
-
-static struct dongle_reg dongle = {
-	.type = IRDA_TEKRAM_DONGLE,
-	.open  = tekram_open,
-	.close = tekram_close,
-	.reset = tekram_reset,
-	.change_speed = tekram_change_speed,
-	.owner = THIS_MODULE,
-};
-
-static int __init tekram_init(void)
-{
-	return irda_device_register_dongle(&dongle);
-}
-
-static void __exit tekram_cleanup(void)
-{
-	irda_device_unregister_dongle(&dongle);
-}
-
-static void tekram_open(dongle_t *self, struct qos_info *qos)
-{
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
-	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
-	qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */	
-	irda_qos_bits_to_value(qos);
-}
-
-static void tekram_close(dongle_t *self)
-{
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
-	/* Power off dongle */
-	self->set_dtr_rts(self->dev, FALSE, FALSE);
-
-	if (self->reset_task)
-		irda_task_delete(self->reset_task);
-	if (self->speed_task)
-		irda_task_delete(self->speed_task);
-}
-
-/*
- * Function tekram_change_speed (dev, state, speed)
- *
- *    Set the speed for the Tekram IRMate 210 type dongle. Warning, this 
- *    function must be called with a process context!
- *
- *    Algorithm
- *    1. clear DTR 
- *    2. set RTS, and wait at least 7 us
- *    3. send Control Byte to the IR-210 through TXD to set new baud rate
- *       wait until the stop bit of Control Byte is sent (for 9600 baud rate, 
- *       it takes about 100 msec)
- *    5. clear RTS (return to NORMAL Operation)
- *    6. wait at least 50 us, new setting (baud rate, etc) takes effect here 
- *       after
- */
-static int tekram_change_speed(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	__u32 speed = (__u32) task->param;
-	__u8 byte;
-	int ret = 0;
-	
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
-	IRDA_ASSERT(task != NULL, return -1;);
-
-	if (self->speed_task && self->speed_task != task) {
-		IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__ );
-		return msecs_to_jiffies(10);
-	} else
-		self->speed_task = task;
-
-	switch (speed) {
-	default:
-	case 9600:
-		byte = TEKRAM_PW|TEKRAM_9600;
-		break;
-	case 19200:
-		byte = TEKRAM_PW|TEKRAM_19200;
-		break;
-	case 38400:
-		byte = TEKRAM_PW|TEKRAM_38400;
-		break;
-	case 57600:
-		byte = TEKRAM_PW|TEKRAM_57600;
-		break;
-	case 115200:
-		byte = TEKRAM_115200;
-		break;
-	}
-
-	switch (task->state) {
-	case IRDA_TASK_INIT:
-	case IRDA_TASK_CHILD_INIT:		
-		/* 
-		 * Need to reset the dongle and go to 9600 bps before
-                 * programming 
-		 */
-		if (irda_task_execute(self, tekram_reset, NULL, task, 
-				      (void *) speed))
-		{
-			/* Dongle need more time to reset */
-			irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
-			/* Give reset 1 sec to finish */
-			ret = msecs_to_jiffies(1000);
-		} else
-			irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
-		break;
-	case IRDA_TASK_CHILD_WAIT:
-		IRDA_WARNING("%s(), resetting dongle timed out!\n",
-			     __FUNCTION__);
-		ret = -1;
-		break;
-	case IRDA_TASK_CHILD_DONE:
-		/* Set DTR, Clear RTS */
-		self->set_dtr_rts(self->dev, TRUE, FALSE);
-	
-		/* Wait at least 7us */
-		udelay(14);
-
-		/* Write control byte */
-		self->write(self->dev, &byte, 1);
-		
-		irda_task_next_state(task, IRDA_TASK_WAIT);
-
-		/* Wait at least 100 ms */
-		ret = msecs_to_jiffies(150);
-		break;
-	case IRDA_TASK_WAIT:
-		/* Set DTR, Set RTS */
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->speed_task = NULL;
-		break;
-	default:
-		IRDA_ERROR("%s(), unknown state %d\n",
-			   __FUNCTION__, task->state);
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->speed_task = NULL;
-		ret = -1;
-		break;
-	}
-	return ret;
-}
-
-/*
- * Function tekram_reset (driver)
- *
- *      This function resets the tekram dongle. Warning, this function 
- *      must be called with a process context!! 
- *
- *      Algorithm:
- *    	  0. Clear RTS and DTR, and wait 50 ms (power off the IR-210 )
- *        1. clear RTS 
- *        2. set DTR, and wait at least 1 ms 
- *        3. clear DTR to SPACE state, wait at least 50 us for further 
- *         operation
- */
-int tekram_reset(struct irda_task *task)
-{
-	dongle_t *self = (dongle_t *) task->instance;
-	int ret = 0;
-
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
-	IRDA_ASSERT(task != NULL, return -1;);
-
-	if (self->reset_task && self->reset_task != task) {
-		IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__ );
-		return msecs_to_jiffies(10);
-	} else
-		self->reset_task = task;
-	
-	/* Power off dongle */
-	//self->set_dtr_rts(self->dev, FALSE, FALSE);
-	self->set_dtr_rts(self->dev, TRUE, TRUE);
-
-	switch (task->state) {
-	case IRDA_TASK_INIT:
-		irda_task_next_state(task, IRDA_TASK_WAIT1);
-
-		/* Sleep 50 ms */
-		ret = msecs_to_jiffies(50);
-		break;
-	case IRDA_TASK_WAIT1:
-		/* Clear DTR, Set RTS */
-		self->set_dtr_rts(self->dev, FALSE, TRUE); 
-
-		irda_task_next_state(task, IRDA_TASK_WAIT2);
-		
-		/* Should sleep 1 ms */
-		ret = msecs_to_jiffies(1);
-		break;
-	case IRDA_TASK_WAIT2:
-		/* Set DTR, Set RTS */
-		self->set_dtr_rts(self->dev, TRUE, TRUE);
-	
-		/* Wait at least 50 us */
-		udelay(75);
-
-		irda_task_next_state(task, IRDA_TASK_DONE);
-		self->reset_task = NULL;
-		break;
-	default:
-		IRDA_ERROR("%s(), unknown state %d\n",
-			   __FUNCTION__, task->state);
-		irda_task_next_state(task, IRDA_TASK_DONE);		
-		self->reset_task = NULL;
-		ret = -1;
-	}
-	return ret;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
-MODULE_DESCRIPTION("Tekram IrMate IR-210B dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-0"); /* IRDA_TEKRAM_DONGLE */
-		
-/*
- * Function init_module (void)
- *
- *    Initialize Tekram module
- *
- */
-module_init(tekram_init);
-
-/*
- * Function cleanup_module (void)
- *
- *    Cleanup Tekram module
- *
- */
-module_exit(tekram_cleanup);