[PATCH] USB: Spelling fixes for drivers/usb.

Here are some spelling corrections for drivers/usb.

cancelation -> cancellation
succesful -> successful
cancelation -> cancellation
decriptor -> descriptor
Initalize -> Initialize
wierd -> weird
Protocoll -> Protocol
occured -> occurred
successfull -> successful
Procesing -> Processing
devide -> divide
Isochronuous -> Isochronous
noticable -> noticeable
Basicly -> Basically
transfering -> transferring
intialize -> initialize
Incomming -> Incoming
additionnal -> additional
asume -> assume
Unfortunatly -> Unfortunately
retreive -> retrieve
tranceiver -> transceiver
Compatiblity -> Compatibility
Incorprated -> Incorporated
existance -> existence
Ununsual -> Unusual

Signed-off-by: Steven Cole <elenstev@mesatop.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

24 files changed, 34 insertions, 34 deletions

diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index e12c5be1e0a3..f50aaf25c98e 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -431,7 +431,7 @@ nomem:
  * (2) error, where io->status is a negative errno value.  The number
  *     of io->bytes transferred before the error is usually less
  *     than requested, and can be nonzero.
- * (3) cancelation, a type of error with status -ECONNRESET that
+ * (3) cancellation, a type of error with status -ECONNRESET that
  *     is initiated by usb_sg_cancel().
  *
  * When this function returns, all memory allocated through usb_sg_init() or
@@ -1282,7 +1282,7 @@ static void release_interface(struct device *dev)
  * bus rwsem; usb device driver probe() methods cannot use this routine.
  *
  * Returns zero on success, or else the status code returned by the
- * underlying call that failed.  On succesful completion, each interface
+ * underlying call that failed.  On successful completion, each interface
  * in the original device configuration has been destroyed, and each one
  * in the new configuration has been probed by all relevant usb device
  * drivers currently known to the kernel.
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 16972159a57a..0faf18d511de 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -121,7 +121,7 @@ struct urb * usb_get_urb(struct urb *urb)
  * describing that request to the USB subsystem.  Request completion will
  * be indicated later, asynchronously, by calling the completion handler.
  * The three types of completion are success, error, and unlink
- * (a software-induced fault, also called "request cancelation").  
+ * (a software-induced fault, also called "request cancellation").  
  *
  * URBs may be submitted in interrupt context.
  *
@@ -170,7 +170,7 @@ struct urb * usb_get_urb(struct urb *urb)
  * As of Linux 2.6, all USB endpoint transfer queues support depths greater
  * than one.  This was previously a HCD-specific behavior, except for ISO
  * transfers.  Non-isochronous endpoint queues are inactive during cleanup
- * after faults (transfer errors or cancelation).
+ * after faults (transfer errors or cancellation).
  *
  * Reserved Bandwidth Transfers:
  *
@@ -395,7 +395,7 @@ int usb_submit_urb(struct urb *urb, int mem_flags)
  *
  * This routine cancels an in-progress request.  URBs complete only
  * once per submission, and may be canceled only once per submission.
- * Successful cancelation means the requests's completion handler will
+ * Successful cancellation means the requests's completion handler will
  * be called with a status code indicating that the request has been
  * canceled (rather than any other code) and will quickly be removed
  * from host controller data structures.
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 3993156c2e82..3f783cbdc7c3 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -569,7 +569,7 @@ static const struct usb_cdc_ether_desc ether_desc = {
 
 /* include the status endpoint if we can, even where it's optional.
  * use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
- * packet, to simplify cancelation; and a big transfer interval, to
+ * packet, to simplify cancellation; and a big transfer interval, to
  * waste less bandwidth.
  *
  * some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 2cff67ccce45..1e5e6ddef787 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -275,7 +275,7 @@ static const char *CHIP;
  *
  * After opening, configure non-control endpoints.  Then use normal
  * stream read() and write() requests; and maybe ioctl() to get more
- * precise FIFO status when recovering from cancelation.
+ * precise FIFO status when recovering from cancellation.
  */
 
 static void epio_complete (struct usb_ep *ep, struct usb_request *req)
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index 0def9f70e889..df75ab65a5ec 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -705,7 +705,7 @@ void nuke(struct lh7a40x_ep *ep, int status)
 		done(ep, req, status);
 	}
 
-	/* Disable IRQ if EP is enabled (has decriptor) */
+	/* Disable IRQ if EP is enabled (has descriptor) */
 	if (ep->desc)
 		pio_irq_disable(ep_index(ep));
 }
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index f1762ed6db63..4d591c764e38 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -240,7 +240,7 @@ struct gs_dev {
 	struct usb_ep		*dev_notify_ep;	/* address of notify endpoint */
 	struct usb_ep		*dev_in_ep;	/* address of in endpoint */
 	struct usb_ep		*dev_out_ep;	/* address of out endpoint */
-	struct usb_endpoint_descriptor		/* desciptor of notify ep */
+	struct usb_endpoint_descriptor		/* descriptor of notify ep */
 				*dev_notify_ep_desc;
 	struct usb_endpoint_descriptor		/* descriptor of in endpoint */
 				*dev_in_ep_desc;
diff --git a/drivers/usb/host/hc_crisv10.c b/drivers/usb/host/hc_crisv10.c
index 376f8a034f65..d9883d774d3a 100644
--- a/drivers/usb/host/hc_crisv10.c
+++ b/drivers/usb/host/hc_crisv10.c
@@ -4329,7 +4329,7 @@ static int __init etrax_usb_hc_init(void)
 	bus->bus_name="ETRAX 100LX";
 	bus->hcpriv = hc;
 
-	/* Initalize RH to the default address.
+	/* Initialize RH to the default address.
 	   And make sure that we have no status change indication */
 	hc->rh.numports = 2;  /* The RH has two ports */
 	hc->rh.devnum = 1;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index d309e292198e..a374b7692073 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -134,7 +134,7 @@ static void port_power(struct sl811 *sl811, int is_on)
 
 /* This is a PIO-only HCD.  Queueing appends URBs to the endpoint's queue,
  * and may start I/O.  Endpoint queues are scanned during completion irq
- * handlers (one per packet: ACK, NAK, faults, etc) and urb cancelation.
+ * handlers (one per packet: ACK, NAK, faults, etc) and urb cancellation.
  *
  * Using an external DMA engine to copy a packet at a time could work,
  * though setup/teardown costs may be too big to make it worthwhile.
@@ -738,7 +738,7 @@ retry:
 		}
 #endif
 
-		/* port status seems wierd until after reset, so
+		/* port status seems weird until after reset, so
 		 * force the reset and make khubd clean up later.
 		 */
 		sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION)
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index 5791723e6083..a330a4b50e16 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -23,7 +23,7 @@
  *
  *
  * The driver brings the USB functions of the MDC800 to Linux.
- * To use the Camera you must support the USB Protocoll of the camera
+ * To use the Camera you must support the USB Protocol of the camera
  * to the Kernel Node.
  * The Driver uses a misc device Node. Create it with :
  * mknod /dev/mustek c 180 32
diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c
index 2d76be62f4e0..94ce2a9ad50f 100644
--- a/drivers/usb/input/aiptek.c
+++ b/drivers/usb/input/aiptek.c
@@ -386,7 +386,7 @@ static int aiptek_convert_from_2s_complement(unsigned char c)
  * convention above.) I therefore have taken over REL_MISC and ABS_MISC
  * (for relative and absolute reports, respectively) for communicating
  * Proximity. Why two events? I thought it interesting to know if the
- * Proximity event occured while the tablet was in absolute or relative
+ * Proximity event occurred while the tablet was in absolute or relative
  * mode.
  *
  * Other tablets use the notion of a certain minimum stylus pressure
diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c
index 6b45a66d58c1..ab1a2a30ce7c 100644
--- a/drivers/usb/input/mtouchusb.c
+++ b/drivers/usb/input/mtouchusb.c
@@ -32,7 +32,7 @@
  *    Changed reset from standard USB dev reset to vendor reset
  *    Changed data sent to host from compensated to raw coordinates
  *    Eliminated vendor/product module params
- *    Performed multiple successfull tests with an EXII-5010UC
+ *    Performed multiple successful tests with an EXII-5010UC
  *
  *  1.5 02/27/2005 ddstreet@ieee.org
  *    Added module parameter to select raw or hw-calibrated coordinate reporting
diff --git a/drivers/usb/media/ov511.c b/drivers/usb/media/ov511.c
index d6051822416e..036c485d1d1e 100644
--- a/drivers/usb/media/ov511.c
+++ b/drivers/usb/media/ov511.c
@@ -5041,7 +5041,7 @@ ov6xx0_configure(struct usb_ov511 *ov)
 		{ OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */
 //		{ OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */
 		{ OV511_I2C_BUS, 0x2d, 0x99 },
-		{ OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Procesing Parameter */
+		{ OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Processing Parameter */
 		{ OV511_I2C_BUS, 0x34, 0xd2 }, /* Max A/D range */
 		{ OV511_I2C_BUS, 0x38, 0x8b },
 		{ OV511_I2C_BUS, 0x39, 0x40 },
diff --git a/drivers/usb/media/pwc/pwc-ctrl.c b/drivers/usb/media/pwc/pwc-ctrl.c
index 42352f531bc0..42ec468d52d6 100644
--- a/drivers/usb/media/pwc/pwc-ctrl.c
+++ b/drivers/usb/media/pwc/pwc-ctrl.c
@@ -1100,7 +1100,7 @@ static inline int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
 	unsigned char buf[4];
 	
 	/* set new relative angle; angles are expressed in degrees * 100,
-	   but cam as .5 degree resolution, hence devide by 200. Also
+	   but cam as .5 degree resolution, hence divide by 200. Also
 	   the angle must be multiplied by 64 before it's send to
 	   the cam (??)
 	 */
diff --git a/drivers/usb/media/pwc/pwc-if.c b/drivers/usb/media/pwc/pwc-if.c
index c53e2263b7fb..cca47f480a8b 100644
--- a/drivers/usb/media/pwc/pwc-if.c
+++ b/drivers/usb/media/pwc/pwc-if.c
@@ -272,7 +272,7 @@ static int pwc_allocate_buffers(struct pwc_device *pdev)
 		return -ENXIO;
 	}
 #endif	
-	/* Allocate Isochronuous pipe buffers */
+	/* Allocate Isochronous pipe buffers */
 	for (i = 0; i < MAX_ISO_BUFS; i++) {
 		if (pdev->sbuf[i].data == NULL) {
 			kbuf = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL);
@@ -850,7 +850,7 @@ static int pwc_isoc_init(struct pwc_device *pdev)
 	
 	if (pdev->vmax_packet_size < 0 || pdev->vmax_packet_size > ISO_MAX_FRAME_SIZE) {
 		Err("Failed to find packet size for video endpoint in current alternate setting.\n");
-		return -ENFILE; /* Odd error, that should be noticable */
+		return -ENFILE; /* Odd error, that should be noticeable */
 	}
 
 	/* Set alternate interface */
@@ -2128,7 +2128,7 @@ static int __init usb_pwc_init(void)
 	if (leds[1] >= 0)
 		led_off = leds[1];
 
-	/* Big device node whoopla. Basicly, it allows you to assign a
+	/* Big device node whoopla. Basically, it allows you to assign a
 	   device node (/dev/videoX) to a camera, based on its type
 	   & serial number. The format is [type[.serialnumber]:]node.
 
diff --git a/drivers/usb/media/pwc/pwc-ioctl.h b/drivers/usb/media/pwc/pwc-ioctl.h
index 65805eaa9a1c..5f9cb08bc02e 100644
--- a/drivers/usb/media/pwc/pwc-ioctl.h
+++ b/drivers/usb/media/pwc/pwc-ioctl.h
@@ -75,7 +75,7 @@
 #define PWC_FPS_SNAPSHOT	0x00400000
 
 
-/* structure for transfering x & y coordinates */
+/* structure for transferring x & y coordinates */
 struct pwc_coord
 {
 	int x, y;		/* guess what */
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index dd4580cb57e0..7d06105763d4 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -859,7 +859,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 		info ("udev is NULL.");
 	}
 
-	/* allocate memory for our device state and intialize it */
+	/* allocate memory for our device state and initialize it */
 
 	dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL);
 
diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c
index f98cb2af024e..341ae5f732dd 100644
--- a/drivers/usb/net/zd1201.c
+++ b/drivers/usb/net/zd1201.c
@@ -183,7 +183,7 @@ static void zd1201_usbtx(struct urb *urb, struct pt_regs *regs)
 	return;
 }
 
-/* Incomming data */
+/* Incoming data */
 static void zd1201_usbrx(struct urb *urb, struct pt_regs *regs)
 {
 	struct zd1201 *zd = urb->context;
@@ -772,7 +772,7 @@ static int zd1201_net_stop(struct net_device *dev)
 /*
 	RFC 1042 encapsulates Ethernet frames in 802.11 frames
 	by prefixing them with 0xaa, 0xaa, 0x03) followed by a SNAP OID of 0
-	(0x00, 0x00, 0x00). Zd requires an additionnal padding, copy
+	(0x00, 0x00, 0x00). Zd requires an additional padding, copy
 	of ethernet addresses, length of the standard RFC 1042 packet
 	and a command byte (which is nul for tx).
 	
@@ -1098,7 +1098,7 @@ static int zd1201_get_range(struct net_device *dev,
 
 /*	Little bit of magic here: we only get the quality if we poll
  *	for it, and we never get an actual request to trigger such
- *	a poll. Therefore we 'asume' that the user will soon ask for
+ *	a poll. Therefore we 'assume' that the user will soon ask for
  *	the stats after asking the bssid.
  */
 static int zd1201_get_wap(struct net_device *dev,
@@ -1108,7 +1108,7 @@ static int zd1201_get_wap(struct net_device *dev,
 	unsigned char buffer[6];
 
 	if (!zd1201_getconfig(zd, ZD1201_RID_COMMSQUALITY, buffer, 6)) {
-		/* Unfortunatly the quality and noise reported is useless.
+		/* Unfortunately the quality and noise reported is useless.
 		   they seem to be accumulators that increase until you
 		   read them, unless we poll on a fixed interval we can't
 		   use them
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index d165f42d560d..9db23decc5bd 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -234,7 +234,7 @@ static struct usb_serial_device_type cypress_hidcom_device = {
  *****************************************************************************/
 
 
-/* This function can either set or retreive the current serial line settings */
+/* This function can either set or retrieve the current serial line settings */
 static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits,
 				   int parity_enable, int parity_type, int reset, int cypress_request_type)
 {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0c4b43533268..52394f08a947 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -76,7 +76,7 @@
  *      Defererence pointers after any paranoid checks, not before.
  *
  * (21/Jun/2003) Erik Nygren
- *      Added support for Home Electronics Tira-1 IR tranceiver using FT232BM chip.
+ *      Added support for Home Electronics Tira-1 IR transceiver using FT232BM chip.
  *      See <http://www.home-electro.com/tira1.htm>.  Only operates properly 
  *      at 100000 and RTS-CTS, so set custom divisor mode on startup.
  *      Also force the Tira-1 and USB-UIRT to only use their custom baud rates.
@@ -91,7 +91,7 @@
  *      Minor whitespace and comment changes.
  *
  * (12/Jun/2003) David Norwood
- *      Added support for USB-UIRT IR tranceiver using 8U232AM chip.
+ *      Added support for USB-UIRT IR transceiver using 8U232AM chip.
  *      See <http://home.earthlink.net/~jrhees/USBUIRT/index.htm>.  Only
  *      operates properly at 312500, so set custom divisor mode on startup.
  *
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 96be36441149..a52bb13a9ce4 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -136,7 +136,7 @@
 /*
  * Home Electronics (www.home-electro.com) USB gadgets
  */
-#define FTDI_HE_TIRA1_PID	0xFA78	/* Tira-1 IR tranceiver */
+#define FTDI_HE_TIRA1_PID	0xFA78	/* Tira-1 IR transceiver */
 
 /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
 /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
diff --git a/drivers/usb/serial/io_usbvend.h b/drivers/usb/serial/io_usbvend.h
index 8c1fa5e722b1..f1804fd5a3dd 100644
--- a/drivers/usb/serial/io_usbvend.h
+++ b/drivers/usb/serial/io_usbvend.h
@@ -289,7 +289,7 @@
 //
 
 //
-// Edgeport Compatiblity Descriptor
+// Edgeport Compatibility Descriptor
 //
 // This descriptor is only returned by Edgeport-compatible devices
 // supporting the EPiC spec. True ION devices do not return this
diff --git a/drivers/usb/serial/keyspan_usa90msg.h b/drivers/usb/serial/keyspan_usa90msg.h
index dd935b62c1a8..86708ecd8735 100644
--- a/drivers/usb/serial/keyspan_usa90msg.h
+++ b/drivers/usb/serial/keyspan_usa90msg.h
@@ -19,7 +19,7 @@
 
         	This file is available under a BSD-style copyright
 
-	2. The name of InnoSys Incorprated may not be used to endorse or promote
+	2. The name of InnoSys Incorporated may not be used to endorse or promote
    	products derived from this software without specific prior written
    	permission.
 
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 7eff03d9b041..f3b60288696c 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -786,7 +786,7 @@ static int usbat_flash_check_media(struct us_data *us,
 	if (rc != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	// Check for media existance
+	// Check for media existence
 	rc = usbat_flash_check_media_present(uio);
 	if (rc == USBAT_FLASH_MEDIA_NONE) {
 		info->sense_key = 0x02;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 99e8249ca13f..d2891f475793 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1,5 +1,5 @@
 /* Driver for USB Mass Storage compliant devices
- * Ununsual Devices File
+ * Unusual Devices File
  *
  * $Id: unusual_devs.h,v 1.32 2002/02/25 02:41:24 mdharm Exp $
  *