summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMatt LaPlante <kernel1@cyberdogtech.com>2006-10-03 22:34:14 +0200
committerAdrian Bunk <bunk@stusta.de>2006-10-03 22:34:14 +0200
commit44c09201a4178e08ed1c8cc37e7aea0683888f0a (patch)
tree2b8a859ef668b24cc7c41331d29357979e07c364
parent095096038d637c477ef3c1b674612bcbc4d60c2d (diff)
more misc typo fixes
Signed-off-by: Adrian Bunk <bunk@stusta.de>
-rw-r--r--arch/cris/arch-v10/drivers/Kconfig4
-rw-r--r--arch/cris/arch-v32/Kconfig2
-rw-r--r--arch/m68knommu/Kconfig4
-rw-r--r--arch/um/Kconfig2
-rw-r--r--arch/x86_64/Kconfig2
-rw-r--r--drivers/input/joystick/Kconfig2
-rw-r--r--fs/Kconfig2
-rw-r--r--mm/Kconfig2
-rw-r--r--net/ipv4/Kconfig4
-rw-r--r--net/ipv4/ipvs/Kconfig2
-rw-r--r--net/ipv4/netfilter/Kconfig2
-rw-r--r--security/selinux/Kconfig2
-rw-r--r--sound/oss/Kconfig2
13 files changed, 16 insertions, 16 deletions
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 8b50e8402954..734d5f3a5304 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -550,7 +550,7 @@ config ETRAX_IDE
select BLK_DEV_IDEDMA
help
Enable this to get support for ATA/IDE.
- You can't use paralell ports or SCSI ports
+ You can't use parallel ports or SCSI ports
at the same time.
@@ -744,7 +744,7 @@ config ETRAX_PA_CHANGEABLE_BITS
default "FF"
help
This is a bitmask with information of what bits in PA that a user
- can change change the value on using ioctl's.
+ can change the value on using ioctl's.
Bit set = changeable.
You probably want 00 here.
diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig
index 22f0ddc04c50..4f79d8ed3e1c 100644
--- a/arch/cris/arch-v32/Kconfig
+++ b/arch/cris/arch-v32/Kconfig
@@ -162,7 +162,7 @@ config ETRAX_SDRAM_GRP1_CONFIG
depends on ETRAX_ARCH_V32
default "0"
help
- SDRAM configuration for group 1. The defult value is 0
+ SDRAM configuration for group 1. The default value is 0
because group 1 is not used in the default configuration,
described in the help for SDRAM_GRP0_CONFIG.
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index b7c942cf7741..6d920d4bdc3d 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -161,8 +161,8 @@ config CLOCK_FREQ
frequency, it may or may not be the same as the external clock
crystal fitted to your board. Some processors have an internal
PLL and can have their frequency programmed at run time, others
- use internal dividers. In gernal the kernel won't setup a PLL
- if it is fitted (there are some expections). This value will be
+ use internal dividers. In general the kernel won't setup a PLL
+ if it is fitted (there are some exceptions). This value will be
specific to the exact CPU that you are using.
config CLOCK_DIV
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 76e85bbaea55..d75307589d74 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -257,7 +257,7 @@ config UML_REAL_TIME_CLOCK
UML and spend long times with UML stopped at a breakpoint. In this
case, when UML is restarted, it will call the timer enough times to make
up for the time spent at the breakpoint. This could result in a
- noticable lag. If this is a problem, then disable this option.
+ noticeable lag. If this is a problem, then disable this option.
endmenu
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 0a5d8e659aa4..010d2265f1cf 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -310,7 +310,7 @@ config K8_NUMA
help
Enable K8 NUMA node topology detection. You should say Y here if
you have a multi processor AMD K8 system. This uses an old
- method to read the NUMA configurtion directly from the builtin
+ method to read the NUMA configuration directly from the builtin
Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
instead, which also takes priority if both are compiled in.
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 67519ef0ef95..271263443c37 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -32,7 +32,7 @@ config JOYSTICK_ANALOG
module will be called analog.
config JOYSTICK_A3D
- tristate "Assasin 3D and MadCatz Panther devices"
+ tristate "Assassin 3D and MadCatz Panther devices"
select GAMEPORT
help
Say Y here if you have an FPGaming or MadCatz controller using the
diff --git a/fs/Kconfig b/fs/Kconfig
index 8d18497de629..deaad99ffadb 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1032,7 +1032,7 @@ config BEFS_FS
on files and directories, and database-like indeces on selected
attributes. (Also note that this driver doesn't make those features
available at this time). It is a 64 bit filesystem, so it supports
- extremly large volumes and files.
+ extremely large volumes and files.
If you use this filesystem, you should also say Y to at least one
of the NLS (native language support) options below.
diff --git a/mm/Kconfig b/mm/Kconfig
index 5d88489ef2de..f10fe51985a0 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -104,7 +104,7 @@ config SPARSEMEM_STATIC
def_bool n
#
-# Architectecture platforms which require a two level mem_section in SPARSEMEM
+# Architecture platforms which require a two level mem_section in SPARSEMEM
# must select this option. This is usually for architecture platforms with
# an extremely sparse physical address space.
#
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 30af4a4dfcc8..0adfd88b7b0b 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -64,7 +64,7 @@ config ASK_IP_FIB_HASH
config IP_FIB_TRIE
bool "FIB_TRIE"
---help---
- Use new experimental LC-trie as FIB lookup algoritm.
+ Use new experimental LC-trie as FIB lookup algorithm.
This improves lookup performance if you have a large
number of routes.
@@ -526,7 +526,7 @@ config TCP_CONG_HYBLA
---help---
TCP-Hybla is a sender-side only change that eliminates penalization of
long-RTT, large-bandwidth connections, like when satellite legs are
- involved, expecially when sharing a common bottleneck with normal
+ involved, especially when sharing a common bottleneck with normal
terrestrial connections.
config TCP_CONG_VEGAS
diff --git a/net/ipv4/ipvs/Kconfig b/net/ipv4/ipvs/Kconfig
index c9820bfc493a..ad52c294d219 100644
--- a/net/ipv4/ipvs/Kconfig
+++ b/net/ipv4/ipvs/Kconfig
@@ -81,7 +81,7 @@ config IP_VS_PROTO_ESP
bool "ESP load balancing support"
depends on IP_VS
---help---
- This option enables support for load balancing ESP (Encapsultion
+ This option enables support for load balancing ESP (Encapsulation
Security Payload) transport protocol. Say Y if unsure.
config IP_VS_PROTO_AH
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index a55b8ff70ded..d88c292f118c 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -373,7 +373,7 @@ config IP_NF_TARGET_ULOG
daemon using netlink multicast sockets; unlike the LOG target
which can only be viewed through syslog.
- The apropriate userspace logging daemon (ulogd) may be obtained from
+ The appropriate userspace logging daemon (ulogd) may be obtained from
<http://www.gnumonks.org/projects/ulogd/>
To compile it as a module, choose M here. If unsure, say N.
diff --git a/security/selinux/Kconfig b/security/selinux/Kconfig
index 293dbd6246c1..d62b09843127 100644
--- a/security/selinux/Kconfig
+++ b/security/selinux/Kconfig
@@ -112,7 +112,7 @@ config SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT
your distribution will provide these and enable the new controls
in the kernel they also distribute.
- Note that this option can be overriden at boot with the
+ Note that this option can be overridden at boot with the
selinux_compat_net parameter, and after boot via
/selinux/compat_net. See Documentation/kernel-parameters.txt
for details on this parameter.
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 97e38b665587..f08396c3f61a 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -647,7 +647,7 @@ config SOUND_PSS
command line.
config PSS_MIXER
- bool "Enable PSS mixer (Beethoven ADSP-16 and other compatibile)"
+ bool "Enable PSS mixer (Beethoven ADSP-16 and other compatible)"
depends on SOUND_PSS
help
Answer Y for Beethoven ADSP-16. You may try to say Y also for other