{cfg,nl,mac}80211: set beacon interval and DTIM period on mesh join

Move the default mesh beacon interval and DTIM period to cfg80211
and make them accessible to nl80211. This enables setting both
values when joining an MBSS.

Previously the DTIM parameter was not set by mac80211 so the
driver's default value was used.

Signed-off-by: Marco Porsch <marco@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

6 files changed, 27 insertions, 3 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 3d8717a0d3b2..516aded3697f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1036,6 +1036,8 @@ struct mesh_config {
  * @ie_len: length of vendor information elements
  * @is_authenticated: this mesh requires authentication
  * @is_secure: this mesh uses security
+ * @dtim_period: DTIM period to use
+ * @beacon_interval: beacon interval to use
  * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
  *
  * These parameters are fixed when the mesh is created.
@@ -1051,6 +1053,8 @@ struct mesh_setup {
 	u8 ie_len;
 	bool is_authenticated;
 	bool is_secure;
+	u8 dtim_period;
+	u16 beacon_interval;
 	int mcast_rate[IEEE80211_NUM_BANDS];
 };
 
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 8a91dd22d571..36aa65f495ff 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1666,6 +1666,9 @@ static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh,
 	memcpy(sdata->vif.bss_conf.mcast_rate, setup->mcast_rate,
 						sizeof(setup->mcast_rate));
 
+	sdata->vif.bss_conf.beacon_int = setup->beacon_interval;
+	sdata->vif.bss_conf.dtim_period = setup->dtim_period;
+
 	return 0;
 }
 
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 245885841c8d..694e27376afa 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -625,7 +625,6 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 	ieee80211_queue_work(&local->hw, &sdata->work);
 	sdata->vif.bss_conf.ht_operation_mode =
 				ifmsh->mshcfg.ht_opmode;
-	sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
 	sdata->vif.bss_conf.enable_beacon = true;
 	sdata->vif.bss_conf.basic_rates =
 		ieee80211_mandatory_rates(local, band);
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index c07f6fc63dc6..aff301544c7f 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -191,8 +191,6 @@ struct mesh_rmc {
 #define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ)
 #define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ)
 
-#define MESH_DEFAULT_BEACON_INTERVAL		1000 	/* in 1024 us units */
-
 #define MESH_PATH_EXPIRE (600 * HZ)
 
 /* Default maximum number of plinks per interface */
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index f9d6ce5cfabb..0fe8ceb5444e 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -44,6 +44,9 @@
 
 #define MESH_SYNC_NEIGHBOR_OFFSET_MAX 50
 
+#define MESH_DEFAULT_BEACON_INTERVAL	1000	/* in 1024 us units (=TUs) */
+#define MESH_DEFAULT_DTIM_PERIOD	2
+
 const struct mesh_config default_mesh_config = {
 	.dot11MeshRetryTimeout = MESH_RET_T,
 	.dot11MeshConfirmTimeout = MESH_CONF_T,
@@ -79,6 +82,8 @@ const struct mesh_setup default_mesh_setup = {
 	.ie = NULL,
 	.ie_len = 0,
 	.is_secure = false,
+	.beacon_interval = MESH_DEFAULT_BEACON_INTERVAL,
+	.dtim_period = MESH_DEFAULT_DTIM_PERIOD,
 };
 
 int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ceb27fda9ec5..d5842eb35aec 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -6669,6 +6669,21 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
 			    nla_get_u32(info->attrs[NL80211_ATTR_MCAST_RATE])))
 			return -EINVAL;
 
+	if (info->attrs[NL80211_ATTR_BEACON_INTERVAL]) {
+		setup.beacon_interval =
+			nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]);
+		if (setup.beacon_interval < 10 ||
+		    setup.beacon_interval > 10000)
+			return -EINVAL;
+	}
+
+	if (info->attrs[NL80211_ATTR_DTIM_PERIOD]) {
+		setup.dtim_period =
+			nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]);
+		if (setup.dtim_period < 1 || setup.dtim_period > 100)
+			return -EINVAL;
+	}
+
 	if (info->attrs[NL80211_ATTR_MESH_SETUP]) {
 		/* parse additional setup parameters if given */
 		err = nl80211_parse_mesh_setup(info, &setup);