summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTimur Tabi <timur@freescale.com>2008-01-09 17:35:05 -0600
committerKumar Gala <galak@kernel.crashing.org>2008-01-23 19:34:10 -0600
commit845cf505cebd159b57b3ae3b25e9ad0eb036f9ab (patch)
treeaaeb813efa4299bff6b6ea80e302d50b8777febd
parentbc556ba940085e46e0ab1b5ed7c31428dc86dd03 (diff)
[POWERPC] QE: Add support for Freescale QUICCEngine UART
Add support for UART serial ports using a Freescale QUICCEngine. Update booting-without-of.txt to define new properties for a QE UART node. Update the MPC8323E-MDS device tree to add UCC5 as a UART. Update the QE library to support slow UCC devices and modules. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-rw-r--r--Documentation/powerpc/booting-without-of.txt9
-rw-r--r--arch/powerpc/boot/dts/mpc832x_mds.dts50
-rw-r--r--arch/powerpc/sysdev/qe_lib/Kconfig2
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc_slow.c10
4 files changed, 68 insertions, 3 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index e8c67c9015b3..a13d4578319c 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1619,7 +1619,7 @@ platforms are moved over to use the flattened-device-tree model.
Required properties:
- device_type : should be "network", "hldc", "uart", "transparent"
- "bisync" or "atm".
+ "bisync", "atm", or "serial".
- compatible : could be "ucc_geth" or "fsl_atm" and so on.
- model : should be "UCC".
- device-id : the ucc number(1-8), corresponding to UCCx in UM.
@@ -1632,6 +1632,13 @@ platforms are moved over to use the flattened-device-tree model.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- pio-handle : The phandle for the Parallel I/O port configuration.
+ - port-number : for UART drivers, the port number to use, between 0 and 3.
+ This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0.
+ The port number is added to the minor number of the device. Unlike the
+ CPM UART driver, the port-number is required for the QE UART driver.
+ - soft-uart : for UART drivers, if specified this means the QE UART device
+ driver should use "Soft-UART" mode, which is needed on some SOCs that have
+ broken UART hardware. Soft-UART is provided via a microcode upload.
- rx-clock-name: the UCC receive clock source
"none": clock source is disabled
"brg1" through "brg16": clock source is BRG1-BRG16, respectively
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 5093ef304ff0..690252456d3d 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -7,6 +7,18 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+
+ * To enable external serial I/O on a Freescale MPC 8323 SYS/MDS board, do
+ * this:
+ *
+ * 1) On chip U61, lift (disconnect) pins 21 (TXD) and 22 (RXD) from the board.
+ * 2) Solder a wire from U61-21 to P19A-23. P19 is a grid of pins on the board
+ * next to the serial ports.
+ * 3) Solder a wire from U61-22 to P19K-22.
+ *
+ * Note that there's a typo in the schematic. The board labels the last column
+ * of pins "P19K", but in the schematic, that column is called "P19J". So if
+ * you're going by the schematic, the pin is called "P19J-K22".
*/
/ {
@@ -169,6 +181,23 @@
1 1e 1 0 1 0 /* TX_EN */
1 1f 2 0 1 0>;/* CRS */
};
+ pio5: ucc_pin@05 {
+ pio-map = <
+ /*
+ * open has
+ * port pin dir drain sel irq
+ */
+ 2 0 1 0 2 0 /* TxD5 */
+ 2 8 2 0 2 0 /* RxD5 */
+
+ 2 1d 2 0 0 0 /* CTS5 */
+ 2 1f 1 0 2 0 /* RTS5 */
+
+ 2 18 2 0 0 0 /* CD */
+
+ >;
+ };
+
};
};
@@ -176,6 +205,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
+ compatible = "fsl,qe";
model = "QE";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
@@ -249,6 +279,26 @@
pio-handle = < &pio4 >;
};
+ ucc@2400 {
+ device_type = "serial";
+ compatible = "ucc_uart";
+ model = "UCC";
+ device-id = <5>; /* The UCC number, 1-7*/
+ port-number = <0>; /* Which ttyQEx device */
+ soft-uart; /* We need Soft-UART */
+ reg = <2400 200>;
+ interrupts = <28>; /* From Table 18-12 */
+ interrupt-parent = < &qeic >;
+ /*
+ * For Soft-UART, we need to set TX to 1X, which
+ * means specifying separate clock sources.
+ */
+ rx-clock-name = "brg5";
+ tx-clock-name = "brg6";
+ pio-handle = < &pio5 >;
+ };
+
+
mdio@2320 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index f611d344a126..adc66212a419 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -4,7 +4,7 @@
config UCC_SLOW
bool
- default n
+ default y if SERIAL_QE
help
This option provides qe_lib support to UCC slow
protocols: UART, BISYNC, QMC
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index 0174b3aeef8f..b2870b208ddb 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -19,6 +19,7 @@
#include <linux/stddef.h>
#include <linux/interrupt.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <asm/io.h>
#include <asm/immap_qe.h>
@@ -41,6 +42,7 @@ u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
default: return QE_CR_SUBBLOCK_INVALID;
}
}
+EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock);
void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
{
@@ -56,6 +58,7 @@ void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
QE_CR_PROTOCOL_UNSPECIFIED, 0);
}
+EXPORT_SYMBOL(ucc_slow_graceful_stop_tx);
void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
{
@@ -65,6 +68,7 @@ void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
}
+EXPORT_SYMBOL(ucc_slow_stop_tx);
void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
{
@@ -74,6 +78,7 @@ void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
}
+EXPORT_SYMBOL(ucc_slow_restart_tx);
void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
{
@@ -94,6 +99,7 @@ void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
}
out_be32(&us_regs->gumr_l, gumr_l);
}
+EXPORT_SYMBOL(ucc_slow_enable);
void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
{
@@ -114,6 +120,7 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
}
out_be32(&us_regs->gumr_l, gumr_l);
}
+EXPORT_SYMBOL(ucc_slow_disable);
/* Initialize the UCC for Slow operations
*
@@ -347,6 +354,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
*uccs_ret = uccs;
return 0;
}
+EXPORT_SYMBOL(ucc_slow_init);
void ucc_slow_free(struct ucc_slow_private * uccs)
{
@@ -366,5 +374,5 @@ void ucc_slow_free(struct ucc_slow_private * uccs)
kfree(uccs);
}
-
+EXPORT_SYMBOL(ucc_slow_free);