summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSamuel Ortiz <sameo@linux.intel.com>2013-06-13 12:14:59 +0200
committerSamuel Ortiz <sameo@linux.intel.com>2013-06-13 12:14:59 +0200
commitd8c5d658f425bd25bbfb137f2617f59ed4fdee7d (patch)
treeba1607f9cc0fb8c3ac246a78490d3e5b8438f44e
parenta1ace0aac5a83b859c2ddeb5dfb032b9b6dcd9cf (diff)
parent1460c152c53335b5403045d056502eda1204c33a (diff)
Merge tag 'am335x_tsc-adc' of git://breakpoint.cc/bigeasy/linux
A complete refurbished series inclunding: - DT support for the MFD, TSC and ADC driver & platform device support, which has no users, has been killed. - iio_map from last series is gone and replaced by proper nodes in the device tree. - suspend fixes which means correct data structs are taken and no interrupt storm - fifo split which should problem with TSC & ADC beeing used at the same time - The ADC channels are now checked before blindly applied. That means the touch part reads X, Y and Z coordinates and does not mix them up. Same goes for the IIO ADC driver. - The IIO ADC driver now creates files named in_voltageX_raw where X represents the ADC line instead of a number starting at 0. A read from this file can return -EBUSY in case touch is busy and the ADC didn't collect a value.
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt44
-rw-r--r--arch/arm/boot/dts/am335x-evm.dts14
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi18
-rw-r--r--drivers/iio/adc/ti_am335x_adc.c132
-rw-r--r--drivers/input/touchscreen/ti_am335x_tsc.c288
-rw-r--r--drivers/mfd/ti_am335x_tscadc.c112
-rw-r--r--include/linux/input/ti_am335x_tsc.h23
-rw-r--r--include/linux/mfd/ti_am335x_tscadc.h35
-rw-r--r--include/linux/platform_data/ti_am335x_adc.h14
9 files changed, 486 insertions, 194 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
new file mode 100644
index 000000000000..491c97b78384
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
@@ -0,0 +1,44 @@
+* TI - TSC ADC (Touschscreen and analog digital converter)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Required properties:
+- child "tsc"
+ ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
+ support on the platform.
+ ti,x-plate-resistance: X plate resistance
+ ti,coordiante-readouts: The sequencer supports a total of 16
+ programmable steps each step is used to
+ read a single coordinate. A single
+ readout is enough but multiple reads can
+ increase the quality.
+ A value of 5 means, 5 reads for X, 5 for
+ Y and 2 for Z (always). This utilises 12
+ of the 16 software steps available. The
+ remaining 4 can be used by the ADC.
+ ti,wire-config: Different boards could have a different order for
+ connecting wires on touchscreen. We need to provide an
+ 8 bit number where in the 1st four bits represent the
+ analog lines and the next 4 bits represent positive/
+ negative terminal on that input line. Notations to
+ represent the input lines and terminals resoectively
+ is as follows:
+ AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
+ XP = 0, XN = 1, YP = 2, YN = 3.
+- child "adc"
+ ti,adc-channels: List of analog inputs available for ADC.
+ AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
+
+Example:
+ tscadc: tscadc@44e0d000 {
+ compatible = "ti,am3359-tscadc";
+ tsc {
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordiante-readouts = <5>;
+ ti,wire-config = <0x00 0x11 0x22 0x33>;
+ };
+
+ adc {
+ ti,adc-channels = <4 5 6 7>;
+ };
+ }
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 0423298a26fe..0fa4c7f9539f 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -244,3 +244,17 @@
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
};
+
+&tscadc {
+ status = "okay";
+ tsc {
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordiante-readouts = <5>;
+ ti,wire-config = <0x00 0x11 0x22 0x33>;
+ };
+
+ adc {
+ ti,adc-channels = <4 5 6 7>;
+ };
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 1460d9b88adf..4ad7797b97b6 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -404,6 +404,24 @@
ti,hwmods = "wkup_m3";
};
+ tscadc: tscadc@44e0d000 {
+ compatible = "ti,am3359-tscadc";
+ reg = <0x44e0d000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ ti,hwmods = "adc_tsc";
+ status = "disabled";
+
+ tsc {
+ compatible = "ti,am3359-tsc";
+ };
+ am335x_adc: adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am3359-adc";
+ };
+
+ };
+
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 5f9a7e7d3135..4427e8e46a7f 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -22,13 +22,18 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/iio/iio.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
#include <linux/mfd/ti_am335x_tscadc.h>
-#include <linux/platform_data/ti_am335x_adc.h>
struct tiadc_device {
struct ti_tscadc_dev *mfd_tscadc;
int channels;
+ u8 channel_line[8];
+ u8 channel_step[8];
};
static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
@@ -42,10 +47,20 @@ static void tiadc_writel(struct tiadc_device *adc, unsigned int reg,
writel(val, adc->mfd_tscadc->tscadc_base + reg);
}
+static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
+{
+ u32 step_en;
+
+ step_en = ((1 << adc_dev->channels) - 1);
+ step_en <<= TOTAL_STEPS - adc_dev->channels + 1;
+ return step_en;
+}
+
static void tiadc_step_config(struct tiadc_device *adc_dev)
{
unsigned int stepconfig;
- int i, channels = 0, steps;
+ int i, steps;
+ u32 step_en;
/*
* There are 16 configurable steps and 8 analog input
@@ -58,43 +73,63 @@ static void tiadc_step_config(struct tiadc_device *adc_dev)
*/
steps = TOTAL_STEPS - adc_dev->channels;
- channels = TOTAL_CHANNELS - adc_dev->channels;
-
stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
- for (i = (steps + 1); i <= TOTAL_STEPS; i++) {
- tiadc_writel(adc_dev, REG_STEPCONFIG(i),
- stepconfig | STEPCONFIG_INP(channels));
- tiadc_writel(adc_dev, REG_STEPDELAY(i),
+ for (i = 0; i < adc_dev->channels; i++) {
+ int chan;
+
+ chan = adc_dev->channel_line[i];
+ tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
+ stepconfig | STEPCONFIG_INP(chan));
+ tiadc_writel(adc_dev, REG_STEPDELAY(steps),
STEPCONFIG_OPENDLY);
- channels++;
+ adc_dev->channel_step[i] = steps;
+ steps++;
}
- tiadc_writel(adc_dev, REG_SE, STPENB_STEPENB);
+ step_en = get_adc_step_mask(adc_dev);
+ am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en);
}
+static const char * const chan_name_ain[] = {
+ "AIN0",
+ "AIN1",
+ "AIN2",
+ "AIN3",
+ "AIN4",
+ "AIN5",
+ "AIN6",
+ "AIN7",
+};
+
static int tiadc_channel_init(struct iio_dev *indio_dev, int channels)
{
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
struct iio_chan_spec *chan_array;
+ struct iio_chan_spec *chan;
int i;
indio_dev->num_channels = channels;
- chan_array = kcalloc(indio_dev->num_channels,
+ chan_array = kcalloc(channels,
sizeof(struct iio_chan_spec), GFP_KERNEL);
-
if (chan_array == NULL)
return -ENOMEM;
- for (i = 0; i < (indio_dev->num_channels); i++) {
- struct iio_chan_spec *chan = chan_array + i;
+ chan = chan_array;
+ for (i = 0; i < channels; i++, chan++) {
+
chan->type = IIO_VOLTAGE;
chan->indexed = 1;
- chan->channel = i;
+ chan->channel = adc_dev->channel_line[i];
chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
+ chan->datasheet_name = chan_name_ain[chan->channel];
+ chan->scan_type.sign = 'u';
+ chan->scan_type.realbits = 12;
+ chan->scan_type.storagebits = 32;
}
indio_dev->channels = chan_array;
- return indio_dev->num_channels;
+ return 0;
}
static void tiadc_channels_remove(struct iio_dev *indio_dev)
@@ -108,7 +143,9 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
{
struct tiadc_device *adc_dev = iio_priv(indio_dev);
int i;
- unsigned int fifo1count, readx1;
+ unsigned int fifo1count, read;
+ u32 step = UINT_MAX;
+ bool found = false;
/*
* When the sub-system is first enabled,
@@ -121,14 +158,26 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
* Hence we need to flush out this data.
*/
+ for (i = 0; i < ARRAY_SIZE(adc_dev->channel_step); i++) {
+ if (chan->channel == adc_dev->channel_line[i]) {
+ step = adc_dev->channel_step[i];
+ break;
+ }
+ }
+ if (WARN_ON_ONCE(step == UINT_MAX))
+ return -EINVAL;
+
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
for (i = 0; i < fifo1count; i++) {
- readx1 = tiadc_readl(adc_dev, REG_FIFO1);
- if (i == chan->channel)
- *val = readx1 & 0xfff;
+ read = tiadc_readl(adc_dev, REG_FIFO1);
+ if (read >> 16 == step) {
+ *val = read & 0xfff;
+ found = true;
+ }
}
- tiadc_writel(adc_dev, REG_SE, STPENB_STEPENB);
-
+ am335x_tsc_se_update(adc_dev->mfd_tscadc);
+ if (found == false)
+ return -EBUSY;
return IIO_VAL_INT;
}
@@ -140,13 +189,15 @@ static int tiadc_probe(struct platform_device *pdev)
{
struct iio_dev *indio_dev;
struct tiadc_device *adc_dev;
- struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
- struct mfd_tscadc_board *pdata;
+ struct device_node *node = pdev->dev.of_node;
+ struct property *prop;
+ const __be32 *cur;
int err;
+ u32 val;
+ int channels = 0;
- pdata = tscadc_dev->dev->platform_data;
- if (!pdata || !pdata->adc_init) {
- dev_err(&pdev->dev, "Could not find platform data\n");
+ if (!node) {
+ dev_err(&pdev->dev, "Could not find valid DT data.\n");
return -EINVAL;
}
@@ -158,8 +209,13 @@ static int tiadc_probe(struct platform_device *pdev)
}
adc_dev = iio_priv(indio_dev);
- adc_dev->mfd_tscadc = tscadc_dev;
- adc_dev->channels = pdata->adc_init->adc_channels;
+ adc_dev->mfd_tscadc = ti_tscadc_dev_get(pdev);
+
+ of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
+ adc_dev->channel_line[channels] = val;
+ channels++;
+ }
+ adc_dev->channels = channels;
indio_dev->dev.parent = &pdev->dev;
indio_dev->name = dev_name(&pdev->dev);
@@ -191,10 +247,15 @@ err_ret:
static int tiadc_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
+ u32 step_en;
iio_device_unregister(indio_dev);
tiadc_channels_remove(indio_dev);
+ step_en = get_adc_step_mask(adc_dev);
+ am335x_tsc_se_clr(adc_dev->mfd_tscadc, step_en);
+
iio_device_free(indio_dev);
return 0;
@@ -205,9 +266,10 @@ static int tiadc_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct tiadc_device *adc_dev = iio_priv(indio_dev);
- struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
+ struct ti_tscadc_dev *tscadc_dev;
unsigned int idle;
+ tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
if (!device_may_wakeup(tscadc_dev->dev)) {
idle = tiadc_readl(adc_dev, REG_CTRL);
idle &= ~(CNTRLREG_TSCSSENB);
@@ -243,16 +305,22 @@ static const struct dev_pm_ops tiadc_pm_ops = {
#define TIADC_PM_OPS NULL
#endif
+static const struct of_device_id ti_adc_dt_ids[] = {
+ { .compatible = "ti,am3359-adc", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ti_adc_dt_ids);
+
static struct platform_driver tiadc_driver = {
.driver = {
- .name = "tiadc",
+ .name = "TI-am335x-adc",
.owner = THIS_MODULE,
.pm = TIADC_PM_OPS,
+ .of_match_table = of_match_ptr(ti_adc_dt_ids),
},
.probe = tiadc_probe,
.remove = tiadc_remove,
};
-
module_platform_driver(tiadc_driver);
MODULE_DESCRIPTION("TI ADC controller driver");
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index 51e7b87827a4..0e9f02aeae6b 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -24,8 +24,9 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/input/ti_am335x_tsc.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/mfd/ti_am335x_tscadc.h>
@@ -33,6 +34,13 @@
#define SEQ_SETTLE 275
#define MAX_12BIT ((1 << 12) - 1)
+static const int config_pins[] = {
+ STEPCONFIG_XPP,
+ STEPCONFIG_XNN,
+ STEPCONFIG_YPP,
+ STEPCONFIG_YNN,
+};
+
struct titsc {
struct input_dev *input;
struct ti_tscadc_dev *mfd_tscadc;
@@ -40,7 +48,10 @@ struct titsc {
unsigned int wires;
unsigned int x_plate_resistance;
bool pen_down;
- int steps_to_configure;
+ int coordinate_readouts;
+ u32 config_inp[4];
+ u32 bit_xp, bit_xn, bit_yp, bit_yn;
+ u32 inp_xp, inp_xn, inp_yp, inp_yn;
};
static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
@@ -54,92 +65,153 @@ static void titsc_writel(struct titsc *tsc, unsigned int reg,
writel(val, tsc->mfd_tscadc->tscadc_base + reg);
}
+static int titsc_config_wires(struct titsc *ts_dev)
+{
+ u32 analog_line[4];
+ u32 wire_order[4];
+ int i, bit_cfg;
+
+ for (i = 0; i < 4; i++) {
+ /*
+ * Get the order in which TSC wires are attached
+ * w.r.t. each of the analog input lines on the EVM.
+ */
+ analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4;
+ wire_order[i] = ts_dev->config_inp[i] & 0x0F;
+ if (WARN_ON(analog_line[i] > 7))
+ return -EINVAL;
+ if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins)))
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 4; i++) {
+ int an_line;
+ int wi_order;
+
+ an_line = analog_line[i];
+ wi_order = wire_order[i];
+ bit_cfg = config_pins[wi_order];
+ if (bit_cfg == 0)
+ return -EINVAL;
+ switch (wi_order) {
+ case 0:
+ ts_dev->bit_xp = bit_cfg;
+ ts_dev->inp_xp = an_line;
+ break;
+
+ case 1:
+ ts_dev->bit_xn = bit_cfg;
+ ts_dev->inp_xn = an_line;
+ break;
+
+ case 2:
+ ts_dev->bit_yp = bit_cfg;
+ ts_dev->inp_yp = an_line;
+ break;
+ case 3:
+ ts_dev->bit_yn = bit_cfg;
+ ts_dev->inp_yn = an_line;
+ break;
+ }
+ }
+ return 0;
+}
+
static void titsc_step_config(struct titsc *ts_dev)
{
unsigned int config;
- int i, total_steps;
-
- /* Configure the Step registers */
- total_steps = 2 * ts_dev->steps_to_configure;
+ int i;
+ int end_step;
+ u32 stepenable;
config = STEPCONFIG_MODE_HWSYNC |
- STEPCONFIG_AVG_16 | STEPCONFIG_XPP;
+ STEPCONFIG_AVG_16 | ts_dev->bit_xp;
switch (ts_dev->wires) {
case 4:
- config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+ config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
break;
case 5:
- config |= STEPCONFIG_YNN |
- STEPCONFIG_INP_AN4 | STEPCONFIG_XNN |
- STEPCONFIG_YPP;
+ config |= ts_dev->bit_yn |
+ STEPCONFIG_INP_AN4 | ts_dev->bit_xn |
+ ts_dev->bit_yp;
break;
case 8:
- config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+ config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
break;
}
- for (i = 1; i <= ts_dev->steps_to_configure; i++) {
+ /* 1 … coordinate_readouts is for X */
+ end_step = ts_dev->coordinate_readouts;
+ for (i = 0; i < end_step; i++) {
titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
}
config = 0;
config = STEPCONFIG_MODE_HWSYNC |
- STEPCONFIG_AVG_16 | STEPCONFIG_YNN |
- STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1;
+ STEPCONFIG_AVG_16 | ts_dev->bit_yn |
+ STEPCONFIG_INM_ADCREFM;
switch (ts_dev->wires) {
case 4:
- config |= STEPCONFIG_YPP;
+ config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
break;
case 5:
- config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 |
- STEPCONFIG_XNP | STEPCONFIG_YPN;
+ config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |
+ ts_dev->bit_xn | ts_dev->bit_yp;
break;
case 8:
- config |= STEPCONFIG_YPP;
+ config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
break;
}
- for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) {
+ /* coordinate_readouts … coordinate_readouts * 2 is for Y */
+ end_step = ts_dev->coordinate_readouts * 2;
+ for (i = ts_dev->coordinate_readouts; i < end_step; i++) {
titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
}
- config = 0;
/* Charge step configuration */
- config = STEPCONFIG_XPP | STEPCONFIG_YNN |
+ config = ts_dev->bit_xp | ts_dev->bit_yn |
STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR |
- STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1;
+ STEPCHARGE_INM_AN1 | STEPCHARGE_INP(ts_dev->inp_yp);
titsc_writel(ts_dev, REG_CHARGECONFIG, config);
titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY);
- config = 0;
- /* Configure to calculate pressure */
+ /* coordinate_readouts * 2 … coordinate_readouts * 2 + 2 is for Z */
config = STEPCONFIG_MODE_HWSYNC |
- STEPCONFIG_AVG_16 | STEPCONFIG_YPP |
- STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM;
- titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config);
- titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1),
+ STEPCONFIG_AVG_16 | ts_dev->bit_yp |
+ ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |
+ STEPCONFIG_INP(ts_dev->inp_xp);
+ titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
+ titsc_writel(ts_dev, REG_STEPDELAY(end_step),
STEPCONFIG_OPENDLY);
- config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1;
- titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config);
- titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2),
+ end_step++;
+ config |= STEPCONFIG_INP(ts_dev->inp_yn);
+ titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
+ titsc_writel(ts_dev, REG_STEPDELAY(end_step),
STEPCONFIG_OPENDLY);
- titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
+ /* The steps1 … end and bit 0 for TS_Charge */
+ stepenable = (1 << (end_step + 2)) - 1;
+ am335x_tsc_se_set(ts_dev->mfd_tscadc, stepenable);
}
static void titsc_read_coordinates(struct titsc *ts_dev,
- unsigned int *x, unsigned int *y)
+ u32 *x, u32 *y, u32 *z1, u32 *z2)
{
unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT);
unsigned int prev_val_x = ~0, prev_val_y = ~0;
unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
unsigned int read, diff;
unsigned int i, channel;
+ unsigned int creads = ts_dev->coordinate_readouts;
+ *z1 = *z2 = 0;
+ if (fifocount % (creads * 2 + 2))
+ fifocount -= fifocount % (creads * 2 + 2);
/*
* Delta filter is used to remove large variations in sampled
* values from ADC. The filter tries to predict where the next
@@ -148,32 +220,32 @@ static void titsc_read_coordinates(struct titsc *ts_dev,
* algorithm compares the difference with that of a present value,
* if true the value is reported to the sub system.
*/
- for (i = 0; i < fifocount - 1; i++) {
+ for (i = 0; i < fifocount; i++) {
read = titsc_readl(ts_dev, REG_FIFO0);
- channel = read & 0xf0000;
- channel = channel >> 0x10;
- if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) {
- read &= 0xfff;
+
+ channel = (read & 0xf0000) >> 16;
+ read &= 0xfff;
+ if (channel < creads) {
diff = abs(read - prev_val_x);
if (diff < prev_diff_x) {
prev_diff_x = diff;
*x = read;
}
prev_val_x = read;
- }
- read = titsc_readl(ts_dev, REG_FIFO1);
- channel = read & 0xf0000;
- channel = channel >> 0x10;
- if ((channel >= ts_dev->steps_to_configure) &&
- (channel < (2 * ts_dev->steps_to_configure - 1))) {
- read &= 0xfff;
+ } else if (channel < creads * 2) {
diff = abs(read - prev_val_y);
if (diff < prev_diff_y) {
prev_diff_y = diff;
*y = read;
}
prev_val_y = read;
+
+ } else if (channel < creads * 2 + 1) {
+ *z1 = read;
+
+ } else if (channel < creads * 2 + 2) {
+ *z2 = read;
}
}
}
@@ -186,23 +258,11 @@ static irqreturn_t titsc_irq(int irq, void *dev)
unsigned int x = 0, y = 0;
unsigned int z1, z2, z;
unsigned int fsm;
- unsigned int fifo1count, fifo0count;
- int i;
status = titsc_readl(ts_dev, REG_IRQSTATUS);
if (status & IRQENB_FIFO0THRES) {
- titsc_read_coordinates(ts_dev, &x, &y);
- z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff;
- z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff;
-
- fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT);
- for (i = 0; i < fifo1count; i++)
- titsc_readl(ts_dev, REG_FIFO1);
-
- fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT);
- for (i = 0; i < fifo0count; i++)
- titsc_readl(ts_dev, REG_FIFO0);
+ titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);
if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
/*
@@ -210,10 +270,10 @@ static irqreturn_t titsc_irq(int irq, void *dev)
* Resistance(touch) = x plate resistance *
* x postion/4096 * ((z2 / z1) - 1)
*/
- z = z2 - z1;
+ z = z1 - z2;
z *= x;
z *= ts_dev->x_plate_resistance;
- z /= z1;
+ z /= z2;
z = (z + 2047) >> 12;
if (z <= MAX_12BIT) {
@@ -248,10 +308,53 @@ static irqreturn_t titsc_irq(int irq, void *dev)
irqclr |= IRQENB_PENUP;
}
- titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
+ if (status & IRQENB_HW_PEN) {
+
+ titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00);
+ titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
+ }
- titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
- return IRQ_HANDLED;
+ if (irqclr) {
+ titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
+ am335x_tsc_se_update(ts_dev->mfd_tscadc);
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static int titsc_parse_dt(struct platform_device *pdev,
+ struct titsc *ts_dev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ int err;
+
+ if (!node)
+ return -EINVAL;
+
+ err = of_property_read_u32(node, "ti,wires", &ts_dev->wires);
+ if (err < 0)
+ return err;
+ switch (ts_dev->wires) {
+ case 4:
+ case 5:
+ case 8:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ err = of_property_read_u32(node, "ti,x-plate-resistance",
+ &ts_dev->x_plate_resistance);
+ if (err < 0)
+ return err;
+
+ err = of_property_read_u32(node, "ti,coordiante-readouts",
+ &ts_dev->coordinate_readouts);
+ if (err < 0)
+ return err;
+
+ return of_property_read_u32_array(node, "ti,wire-config",
+ ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp));
}
/*
@@ -262,17 +365,9 @@ static int titsc_probe(struct platform_device *pdev)
{
struct titsc *ts_dev;
struct input_dev *input_dev;
- struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
- struct mfd_tscadc_board *pdata;
+ struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);
int err;
- pdata = tscadc_dev->dev->platform_data;
-
- if (!pdata) {
- dev_err(&pdev->dev, "Could not find platform data\n");
- return -EINVAL;
- }
-
/* Allocate memory for device */
ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL);
input_dev = input_allocate_device();
@@ -286,9 +381,12 @@ static int titsc_probe(struct platform_device *pdev)
ts_dev->mfd_tscadc = tscadc_dev;
ts_dev->input = input_dev;
ts_dev->irq = tscadc_dev->irq;
- ts_dev->wires = pdata->tsc_init->wires;
- ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;
- ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;
+
+ err = titsc_parse_dt(pdev, ts_dev);
+ if (err) {
+ dev_err(&pdev->dev, "Could not find valid DT data.\n");
+ goto err_free_mem;
+ }
err = request_irq(ts_dev->irq, titsc_irq,
0, pdev->dev.driver->name, ts_dev);
@@ -298,8 +396,14 @@ static int titsc_probe(struct platform_device *pdev)
}
titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
+ err = titsc_config_wires(ts_dev);
+ if (err) {
+ dev_err(&pdev->dev, "wrong i/p wire configuration\n");
+ goto err_free_irq;
+ }
titsc_step_config(ts_dev);
- titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure);
+ titsc_writel(ts_dev, REG_FIFO0THR,
+ ts_dev->coordinate_readouts * 2 + 2 - 1);
input_dev->name = "ti-tsc";
input_dev->dev.parent = &pdev->dev;
@@ -329,11 +433,16 @@ err_free_mem:
static int titsc_remove(struct platform_device *pdev)
{
- struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
- struct titsc *ts_dev = tscadc_dev->tsc;
+ struct titsc *ts_dev = platform_get_drvdata(pdev);
+ u32 steps;
free_irq(ts_dev->irq, ts_dev);
+ /* total steps followed by the enable mask */
+ steps = 2 * ts_dev->coordinate_readouts + 2;
+ steps = (1 << steps) - 1;
+ am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps);
+
input_unregister_device(ts_dev->input);
platform_set_drvdata(pdev, NULL);
@@ -344,10 +453,11 @@ static int titsc_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int titsc_suspend(struct device *dev)
{
- struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
- struct titsc *ts_dev = tscadc_dev->tsc;
+ struct titsc *ts_dev = dev_get_drvdata(dev);
+ struct ti_tscadc_dev *tscadc_dev;
unsigned int idle;
+ tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
if (device_may_wakeup(tscadc_dev->dev)) {
idle = titsc_readl(ts_dev, REG_IRQENABLE);
titsc_writel(ts_dev, REG_IRQENABLE,
@@ -359,9 +469,10 @@ static int titsc_suspend(struct device *dev)
static int titsc_resume(struct device *dev)
{
- struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
- struct titsc *ts_dev = tscadc_dev->tsc;
+ struct titsc *ts_dev = dev_get_drvdata(dev);
+ struct ti_tscadc_dev *tscadc_dev;
+ tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
if (device_may_wakeup(tscadc_dev->dev)) {
titsc_writel(ts_dev, REG_IRQWAKEUP,
0x00);
@@ -369,7 +480,7 @@ static int titsc_resume(struct device *dev)
}
titsc_step_config(ts_dev);
titsc_writel(ts_dev, REG_FIFO0THR,
- ts_dev->steps_to_configure);
+ ts_dev->coordinate_readouts * 2 + 2 - 1);
return 0;
}
@@ -382,13 +493,20 @@ static const struct dev_pm_ops titsc_pm_ops = {
#define TITSC_PM_OPS NULL
#endif
+static const struct of_device_id ti_tsc_dt_ids[] = {
+ { .compatible = "ti,am3359-tsc", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids);
+
static struct platform_driver ti_tsc_driver = {
.probe = titsc_probe,
.remove = titsc_remove,
.driver = {
- .name = "tsc",
+ .name = "TI-am335x-tsc",
.owner = THIS_MODULE,
.pm = TITSC_PM_OPS,
+ .of_match_table = of_match_ptr(ti_tsc_dt_ids),
},
};
module_platform_driver(ti_tsc_driver);
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index e9f3fb510b44..b003a16ba227 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -22,10 +22,10 @@
#include <linux/regmap.h>
#include <linux/mfd/core.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/mfd/ti_am335x_tscadc.h>
-#include <linux/input/ti_am335x_tsc.h>
-#include <linux/platform_data/ti_am335x_adc.h>
static unsigned int tscadc_readl(struct ti_tscadc_dev *tsadc, unsigned int reg)
{
@@ -48,6 +48,32 @@ static const struct regmap_config tscadc_regmap_config = {
.val_bits = 32,
};
+void am335x_tsc_se_update(struct ti_tscadc_dev *tsadc)
+{
+ tscadc_writel(tsadc, REG_SE, tsadc->reg_se_cache);
+}
+EXPORT_SYMBOL_GPL(am335x_tsc_se_update);
+
+void am335x_tsc_se_set(struct ti_tscadc_dev *tsadc, u32 val)
+{
+ spin_lock(&tsadc->reg_lock);
+ tsadc->reg_se_cache |= val;
+ spin_unlock(&tsadc->reg_lock);
+
+ am335x_tsc_se_update(tsadc);
+}
+EXPORT_SYMBOL_GPL(am335x_tsc_se_set);
+
+void am335x_tsc_se_clr(struct ti_tscadc_dev *tsadc, u32 val)
+{
+ spin_lock(&tsadc->reg_lock);
+ tsadc->reg_se_cache &= ~val;
+ spin_unlock(&tsadc->reg_lock);
+
+ am335x_tsc_se_update(tsadc);
+}
+EXPORT_SYMBOL_GPL(am335x_tsc_se_clr);
+
static void tscadc_idle_config(struct ti_tscadc_dev *config)
{
unsigned int idleconfig;
@@ -63,27 +89,48 @@ static int ti_tscadc_probe(struct platform_device *pdev)
struct ti_tscadc_dev *tscadc;
struct resource *res;
struct clk *clk;
- struct mfd_tscadc_board *pdata = pdev->dev.platform_data;
+ struct device_node *node = pdev->dev.of_node;
struct mfd_cell *cell;
+ struct property *prop;
+ const __be32 *cur;
+ u32 val;
int err, ctrl;
int clk_value, clock_rate;
- int tsc_wires, adc_channels = 0, total_channels;
+ int tsc_wires = 0, adc_channels = 0, total_channels;
+ int readouts = 0;
- if (!pdata) {
- dev_err(&pdev->dev, "Could not find platform data\n");
+ if (!pdev->dev.of_node) {
+ dev_err(&pdev->dev, "Could not find valid DT data.\n");
return -EINVAL;
}
- if (pdata->adc_init)
- adc_channels = pdata->adc_init->adc_channels;
-
- tsc_wires = pdata->tsc_init->wires;
+ node = of_get_child_by_name(pdev->dev.of_node, "tsc");
+ of_property_read_u32(node, "ti,wires", &tsc_wires);
+ of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
+
+ node = of_get_child_by_name(pdev->dev.of_node, "adc");
+ of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
+ adc_channels++;
+ if (val > 7) {
+ dev_err(&pdev->dev, " PIN numbers are 0..7 (not %d)\n",
+ val);
+ return -EINVAL;
+ }
+ }
total_channels = tsc_wires + adc_channels;
-
if (total_channels > 8) {
dev_err(&pdev->dev, "Number of i/p channels more than 8\n");
return -EINVAL;
}
+ if (total_channels == 0) {
+ dev_err(&pdev->dev, "Need atleast one channel.\n");
+ return -EINVAL;
+ }
+
+ if (readouts * 2 + 2 + adc_channels > 16) {
+ dev_err(&pdev->dev, "Too many step configurations requested\n");
+ return -EINVAL;
+ }
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -129,6 +176,7 @@ static int ti_tscadc_probe(struct platform_device *pdev)
goto ret;
}
+ spin_lock_init(&tscadc->reg_lock);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
@@ -173,26 +221,37 @@ static int ti_tscadc_probe(struct platform_device *pdev)
ctrl |= CNTRLREG_TSCSSENB;
tscadc_writel(tscadc, REG_CTRL, ctrl);
+ tscadc->used_cells = 0;
+ tscadc->tsc_cell = -1;
+ tscadc->adc_cell = -1;
+
/* TSC Cell */
- cell = &tscadc->cells[TSC_CELL];
- cell->name = "tsc";
- cell->platform_data = tscadc;
- cell->pdata_size = sizeof(*tscadc);
+ if (tsc_wires > 0) {
+ tscadc->tsc_cell = tscadc->used_cells;
+ cell = &tscadc->cells[tscadc->used_cells++];
+ cell->name = "TI-am335x-tsc";
+ cell->of_compatible = "ti,am3359-tsc";
+ cell->platform_data = &tscadc;
+ cell->pdata_size = sizeof(tscadc);
+ }
/* ADC Cell */
- cell = &tscadc->cells[ADC_CELL];
- cell->name = "tiadc";
- cell->platform_data = tscadc;
- cell->pdata_size = sizeof(*tscadc);
+ if (adc_channels > 0) {
+ tscadc->adc_cell = tscadc->used_cells;
+ cell = &tscadc->cells[tscadc->used_cells++];
+ cell->name = "TI-am335x-adc";
+ cell->of_compatible = "ti,am3359-adc";
+ cell->platform_data = &tscadc;
+ cell->pdata_size = sizeof(tscadc);
+ }
err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells,
- TSCADC_CELLS, NULL, 0, NULL);
+ tscadc->used_cells, NULL, 0, NULL);
if (err < 0)
goto err_disable_clk;
device_init_wakeup(&pdev->dev, true);
platform_set_drvdata(pdev, tscadc);
-
return 0;
err_disable_clk:
@@ -239,7 +298,7 @@ static int tscadc_resume(struct device *dev)
CNTRLREG_STEPID | CNTRLREG_4WIRE;
tscadc_writel(tscadc_dev, REG_CTRL, ctrl);
tscadc_idle_config(tscadc_dev);
- tscadc_writel(tscadc_dev, REG_SE, STPENB_STEPENB);
+ am335x_tsc_se_update(tscadc_dev);
restore = tscadc_readl(tscadc_dev, REG_CTRL);
tscadc_writel(tscadc_dev, REG_CTRL,
(restore | CNTRLREG_TSCSSENB));
@@ -256,11 +315,18 @@ static const struct dev_pm_ops tscadc_pm_ops = {
#define TSCADC_PM_OPS NULL
#endif
+static const struct of_device_id ti_tscadc_dt_ids[] = {
+ { .compatible = "ti,am3359-tscadc", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ti_tscadc_dt_ids);
+
static struct platform_driver ti_tscadc_driver = {
.driver = {
- .name = "ti_tscadc",
+ .name = "ti_am3359-tscadc",
.owner = THIS_MODULE,
.pm = TSCADC_PM_OPS,
+ .of_match_table = of_match_ptr(ti_tscadc_dt_ids),
},
.probe = ti_tscadc_probe,
.remove = ti_tscadc_remove,
diff --git a/include/linux/input/ti_am335x_tsc.h b/include/linux/input/ti_am335x_tsc.h
deleted file mode 100644
index 49269a2aa329..000000000000
--- a/include/linux/input/ti_am335x_tsc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __LINUX_TI_AM335X_TSC_H
-#define __LINUX_TI_AM335X_TSC_H
-
-/**
- * struct tsc_data Touchscreen wire configuration
- * @wires: Wires refer to application modes
- * i.e. 4/5/8 wire touchscreen support
- * on the platform.
- * @x_plate_resistance: X plate resistance.
- * @steps_to_configure: The sequencer supports a total of
- * 16 programmable steps.
- * A step configured to read a single
- * co-ordinate value, can be applied
- * more number of times for better results.
- */
-
-struct tsc_data {
- int wires;
- int x_plate_resistance;
- int steps_to_configure;
-};
-
-#endif
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index c79ad5d2f271..8d73fe29796a 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -30,8 +30,8 @@
#define REG_IDLECONFIG 0x058
#define REG_CHARGECONFIG 0x05C
#define REG_CHARGEDELAY 0x060
-#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8))
-#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8))
+#define REG_STEPCONFIG(n) (0x64 + ((n) * 8))
+#define REG_STEPDELAY(n) (0x68 + ((n) * 8))
#define REG_FIFO0CNT 0xE4
#define REG_FIFO0THR 0xE8
#define REG_FIFO1CNT 0xF0
@@ -46,8 +46,6 @@
/* Step Enable */
#define STEPENB_MASK (0x1FFFF << 0)
#define STEPENB(val) ((val) << 0)
-#define STPENB_STEPENB STEPENB(0x1FFFF)
-#define STPENB_STEPENB_TC STEPENB(0x1FFF)
/* IRQ enable */
#define IRQENB_HW_PEN BIT(0)
@@ -73,8 +71,6 @@
#define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8)
#define STEPCONFIG_INP_MASK (0xF << 19)
#define STEPCONFIG_INP(val) ((val) << 19)
-#define STEPCONFIG_INP_AN2 STEPCONFIG_INP(2)
-#define STEPCONFIG_INP_AN3 STEPCONFIG_INP(3)
#define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4)
#define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8)
#define STEPCONFIG_FIFO1 BIT(26)
@@ -96,7 +92,6 @@
#define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1)
#define STEPCHARGE_INP_MASK (0xF << 19)
#define STEPCHARGE_INP(val) ((val) << 19)
-#define STEPCHARGE_INP_AN1 STEPCHARGE_INP(1)
#define STEPCHARGE_RFM_MASK (3 << 23)
#define STEPCHARGE_RFM(val) ((val) << 23)
#define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1)
@@ -125,22 +120,17 @@
#define TSCADC_CELLS 2
-enum tscadc_cells {
- TSC_CELL,
- ADC_CELL,
-};
-
-struct mfd_tscadc_board {
- struct tsc_data *tsc_init;
- struct adc_data *adc_init;
-};
-
struct ti_tscadc_dev {
struct device *dev;
struct regmap *regmap_tscadc;
void __iomem *tscadc_base;
int irq;
+ int used_cells; /* 1-2 */
+ int tsc_cell; /* -1 if not used */
+ int adc_cell; /* -1 if not used */
struct mfd_cell cells[TSCADC_CELLS];
+ u32 reg_se_cache;
+ spinlock_t reg_lock;
/* tsc device */
struct titsc *tsc;
@@ -149,4 +139,15 @@ struct ti_tscadc_dev {
struct adc_device *adc;
};
+static inline struct ti_tscadc_dev *ti_tscadc_dev_get(struct platform_device *p)
+{
+ struct ti_tscadc_dev **tscadc_dev = p->dev.platform_data;
+
+ return *tscadc_dev;
+}
+
+void am335x_tsc_se_update(struct ti_tscadc_dev *tsadc);
+void am335x_tsc_se_set(struct ti_tscadc_dev *tsadc, u32 val);
+void am335x_tsc_se_clr(struct ti_tscadc_dev *tsadc, u32 val);
+
#endif
diff --git a/include/linux/platform_data/ti_am335x_adc.h b/include/linux/platform_data/ti_am335x_adc.h
deleted file mode 100644
index e41d5834cb84..000000000000
--- a/include/linux/platform_data/ti_am335x_adc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __LINUX_TI_AM335X_ADC_H
-#define __LINUX_TI_AM335X_ADC_H
-
-/**
- * struct adc_data ADC Input information
- * @adc_channels: Number of analog inputs
- * available for ADC.
- */
-
-struct adc_data {
- unsigned int adc_channels;
-};
-
-#endif