summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-05-26 13:35:03 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-26 13:35:03 -0700
commitae32adc1e06d096399f195eeda12d443d53539c4 (patch)
tree9fc69aaabc6a7b95d435ae7197f57aaa672933db
parentf465d145d76803fe6332092775d891c8c509aa44 (diff)
parent9868a060ccf769c08ec378a9829137e272e9a92c (diff)
Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux
Pull i2c-embedded changes from Wolfram Sang: "Major changes: - lots of devicetree additions for existing drivers. I tried hard to make sure the bindings are proper. In more complicated cases, I requested acks from people having more experience with them than me. That took a bit of extra time and also some time went into discussions with developers about what bindings are and what not. I have the feeling that the workflow with bindings should be improved to scale better. I will spend some more thought on this... - i2c-muxes are succesfully used meanwhile, so we dropped EXPERIMENTAL for them and renamed the drivers to a standard pattern to match the rest of the subsystem. They can also be used with devicetree now. - ixp2000 was removed since the whole platform goes away. - cleanups (strlcpy instead of strcpy, NULL instead of 0) - The rest is typical driver fixes I assume. All patches have been in linux-next at least since v3.4-rc6." Fixed up trivial conflict in arch/arm/mach-lpc32xx/common.c due to the same patch already having come in through the arm/soc trees, with additional patches on top of it. * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (35 commits) i2c: davinci: Free requested IRQ in remove i2c: ocores: register OF i2c devices i2c: tegra: notify transfer-complete after clearing status. I2C: xiic: Add OF binding support i2c: Rename last mux driver to standard pattern i2c: tegra: fix 10bit address configuration i2c: muxes: rename first set of drivers to a standard pattern of/i2c: implement of_find_i2c_adapter_by_node i2c: implement i2c_verify_adapter i2c-s3c2410: Add HDMIPHY quirk for S3C2440 i2c-s3c2410: Rework device type handling i2c: muxes are not EXPERIMENTAL anymore i2c/of: Automatically populate i2c mux busses from device tree data. i2c: Add a struct device * parameter to i2c_add_mux_adapter() of/i2c: call i2c_verify_client from of_find_i2c_device_by_node i2c: designware: Add clk_{un}prepare() support i2c: designware: add PM support i2c: ixp2000: remove driver i2c: pnx: add device tree support i2c: imx: don't use strcpy but strlcpy ...
-rw-r--r--Documentation/devicetree/bindings/i2c/mux.txt60
-rw-r--r--Documentation/devicetree/bindings/i2c/samsung-i2c.txt8
-rw-r--r--Documentation/devicetree/bindings/i2c/xiic.txt22
-rw-r--r--Documentation/i2c/muxes/i2c-mux-gpio (renamed from Documentation/i2c/muxes/gpio-i2cmux)12
-rw-r--r--MAINTAINERS8
-rw-r--r--drivers/i2c/Kconfig1
-rw-r--r--drivers/i2c/busses/Kconfig14
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-davinci.c2
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c31
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h5
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c33
-rw-r--r--drivers/i2c/busses/i2c-eg20t.c246
-rw-r--r--drivers/i2c/busses/i2c-gpio.c7
-rw-r--r--drivers/i2c/busses/i2c-imx.c2
-rw-r--r--drivers/i2c/busses/i2c-ixp2000.c157
-rw-r--r--drivers/i2c/busses/i2c-mpc.c30
-rw-r--r--drivers/i2c/busses/i2c-ocores.c3
-rw-r--r--drivers/i2c/busses/i2c-pca-platform.c2
-rw-r--r--drivers/i2c/busses/i2c-pxa.c5
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c109
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c11
-rw-r--r--drivers/i2c/busses/i2c-tegra.c24
-rw-r--r--drivers/i2c/busses/i2c-versatile.c9
-rw-r--r--drivers/i2c/busses/i2c-xiic.c23
-rw-r--r--drivers/i2c/i2c-core.c17
-rw-r--r--drivers/i2c/i2c-mux.c42
-rw-r--r--drivers/i2c/muxes/Kconfig6
-rw-r--r--drivers/i2c/muxes/Makefile6
-rw-r--r--drivers/i2c/muxes/i2c-mux-gpio.c (renamed from drivers/i2c/muxes/gpio-i2cmux.c)42
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca9541.c (renamed from drivers/i2c/muxes/pca9541.c)3
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca954x.c (renamed from drivers/i2c/muxes/pca954x.c)2
-rw-r--r--drivers/of/of_i2c.c16
-rw-r--r--include/linux/i2c-mux-gpio.h (renamed from include/linux/gpio-i2cmux.h)14
-rw-r--r--include/linux/i2c-mux.h3
-rw-r--r--include/linux/i2c.h1
-rw-r--r--include/linux/of_i2c.h4
37 files changed, 483 insertions, 498 deletions
diff --git a/Documentation/devicetree/bindings/i2c/mux.txt b/Documentation/devicetree/bindings/i2c/mux.txt
new file mode 100644
index 000000000000..af84cce5cd7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/mux.txt
@@ -0,0 +1,60 @@
+Common i2c bus multiplexer/switch properties.
+
+An i2c bus multiplexer/switch will have several child busses that are
+numbered uniquely in a device dependent manner. The nodes for an i2c bus
+multiplexer/switch will have one child node for each child
+bus.
+
+Required properties:
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Required properties for child nodes:
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg : The sub-bus number.
+
+Optional properties for child nodes:
+- Other properties specific to the multiplexer/switch hardware.
+- Child nodes conforming to i2c bus binding
+
+
+Example :
+
+ /*
+ An NXP pca9548 8 channel I2C multiplexer at address 0x70
+ with two NXP pca8574 GPIO expanders attached, one each to
+ ports 3 and 4.
+ */
+
+ mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ gpio1: gpio@38 {
+ compatible = "nxp,pca8574";
+ reg = <0x38>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ gpio2: gpio@38 {
+ compatible = "nxp,pca8574";
+ reg = <0x38>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
index 38832c712919..b6cb5a12c672 100644
--- a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
@@ -6,14 +6,18 @@ Required properties:
- compatible: value should be either of the following.
(a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
(b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
+ (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
+ inside HDMIPHY block found on several samsung SoCs
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
- samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
- - gpios: The order of the gpios should be the following: <SDA, SCL>.
- The gpio specifier depends on the gpio controller.
Optional properties:
+ - gpios: The order of the gpios should be the following: <SDA, SCL>.
+ The gpio specifier depends on the gpio controller. Required in all
+ cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
+ lines are permanently wired to the respective client
- samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
specified, default value is 0.
- samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
diff --git a/Documentation/devicetree/bindings/i2c/xiic.txt b/Documentation/devicetree/bindings/i2c/xiic.txt
new file mode 100644
index 000000000000..ceabbe91ae44
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/xiic.txt
@@ -0,0 +1,22 @@
+Xilinx IIC controller:
+
+Required properties:
+- compatible : Must be "xlnx,xps-iic-2.00.a"
+- reg : IIC register location and length
+- interrupts : IIC controller unterrupt
+- #address-cells = <1>
+- #size-cells = <0>
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Example:
+
+ axi_iic_0: i2c@40800000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupts = < 1 2 >;
+ reg = < 0x40800000 0x10000 >;
+
+ #size-cells = <0>;
+ #address-cells = <1>;
+ };
diff --git a/Documentation/i2c/muxes/gpio-i2cmux b/Documentation/i2c/muxes/i2c-mux-gpio
index 811cd78d4cdc..bd9b2299b739 100644
--- a/Documentation/i2c/muxes/gpio-i2cmux
+++ b/Documentation/i2c/muxes/i2c-mux-gpio
@@ -1,11 +1,11 @@
-Kernel driver gpio-i2cmux
+Kernel driver i2c-gpio-mux
Author: Peter Korsgaard <peter.korsgaard@barco.com>
Description
-----------
-gpio-i2cmux is an i2c mux driver providing access to I2C bus segments
+i2c-gpio-mux is an i2c mux driver providing access to I2C bus segments
from a master I2C bus and a hardware MUX controlled through GPIO pins.
E.G.:
@@ -26,16 +26,16 @@ according to the settings of the GPIO pins 1..N.
Usage
-----
-gpio-i2cmux uses the platform bus, so you need to provide a struct
+i2c-gpio-mux uses the platform bus, so you need to provide a struct
platform_device with the platform_data pointing to a struct
gpio_i2cmux_platform_data with the I2C adapter number of the master
bus, the number of bus segments to create and the GPIO pins used
-to control it. See include/linux/gpio-i2cmux.h for details.
+to control it. See include/linux/i2c-gpio-mux.h for details.
E.G. something like this for a MUX providing 4 bus segments
controlled through 3 GPIO pins:
-#include <linux/gpio-i2cmux.h>
+#include <linux/i2c-gpio-mux.h>
#include <linux/platform_device.h>
static const unsigned myboard_gpiomux_gpios[] = {
@@ -57,7 +57,7 @@ static struct gpio_i2cmux_platform_data myboard_i2cmux_data = {
};
static struct platform_device myboard_i2cmux = {
- .name = "gpio-i2cmux",
+ .name = "i2c-gpio-mux",
.id = 0,
.dev = {
.platform_data = &myboard_i2cmux_data,
diff --git a/MAINTAINERS b/MAINTAINERS
index daa31999b2a1..6f90c64a2539 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2988,9 +2988,9 @@ GENERIC GPIO I2C MULTIPLEXER DRIVER
M: Peter Korsgaard <peter.korsgaard@barco.com>
L: linux-i2c@vger.kernel.org
S: Supported
-F: drivers/i2c/muxes/gpio-i2cmux.c
-F: include/linux/gpio-i2cmux.h
-F: Documentation/i2c/muxes/gpio-i2cmux
+F: drivers/i2c/muxes/i2c-mux-gpio.c
+F: include/linux/i2c-mux-gpio.h
+F: Documentation/i2c/muxes/i2c-mux-gpio
GENERIC HDLC (WAN) DRIVERS
M: Krzysztof Halasa <khc@pm.waw.pl>
@@ -5148,7 +5148,7 @@ PCA9541 I2C BUS MASTER SELECTOR DRIVER
M: Guenter Roeck <guenter.roeck@ericsson.com>
L: linux-i2c@vger.kernel.org
S: Maintained
-F: drivers/i2c/muxes/pca9541.c
+F: drivers/i2c/muxes/i2c-mux-pca9541.c
PCA9564/PCA9665 I2C BUS DRIVER
M: Wolfram Sang <w.sang@pengutronix.de>
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 5f13c62e64b4..5a3bb3d738d8 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -49,7 +49,6 @@ config I2C_CHARDEV
config I2C_MUX
tristate "I2C bus multiplexing support"
- depends on EXPERIMENTAL
help
Say Y here if you want the I2C core to support the ability to
handle multiplexed I2C bus topologies, by presenting each
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index eec2cf57539a..7244c8be6063 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -445,20 +445,6 @@ config I2C_IOP3XX
This driver can also be built as a module. If so, the module
will be called i2c-iop3xx.
-config I2C_IXP2000
- tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)"
- depends on ARCH_IXP2000
- select I2C_ALGOBIT
- help
- Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
- system and are using GPIO lines for an I2C bus.
-
- This support is also available as a module. If so, the module
- will be called i2c-ixp2000.
-
- This driver is deprecated and will be dropped soon. Use i2c-gpio
- instead.
-
config I2C_MPC
tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
depends on PPC
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 569567b0d027..ce3c2be7fb40 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -44,7 +44,6 @@ obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IMX) += i2c-imx.o
obj-$(CONFIG_I2C_INTEL_MID) += i2c-intel-mid.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
-obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
obj-$(CONFIG_I2C_MXS) += i2c-mxs.o
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index a76d85fa3ad7..79b4bcb3b85c 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -755,7 +755,7 @@ static int davinci_i2c_remove(struct platform_device *pdev)
dev->clk = NULL;
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
- free_irq(IRQ_I2C, dev);
+ free_irq(dev->irq, dev);
iounmap(dev->base);
kfree(dev);
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index df8799241009..1e48bec80edf 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -164,9 +164,15 @@ static char *abort_sources[] = {
u32 dw_readl(struct dw_i2c_dev *dev, int offset)
{
- u32 value = readl(dev->base + offset);
+ u32 value;
- if (dev->swab)
+ if (dev->accessor_flags & ACCESS_16BIT)
+ value = readw(dev->base + offset) |
+ (readw(dev->base + offset + 2) << 16);
+ else
+ value = readl(dev->base + offset);
+
+ if (dev->accessor_flags & ACCESS_SWAP)
return swab32(value);
else
return value;
@@ -174,10 +180,15 @@ u32 dw_readl(struct dw_i2c_dev *dev, int offset)
void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
{
- if (dev->swab)
+ if (dev->accessor_flags & ACCESS_SWAP)
b = swab32(b);
- writel(b, dev->base + offset);
+ if (dev->accessor_flags & ACCESS_16BIT) {
+ writew((u16)b, dev->base + offset);
+ writew((u16)(b >> 16), dev->base + offset + 2);
+ } else {
+ writel(b, dev->base + offset);
+ }
}
static u32
@@ -251,14 +262,14 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
input_clock_khz = dev->get_clk_rate_khz(dev);
- /* Configure register endianess access */
reg = dw_readl(dev, DW_IC_COMP_TYPE);
if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
- dev->swab = 1;
- reg = DW_IC_COMP_TYPE_VALUE;
- }
-
- if (reg != DW_IC_COMP_TYPE_VALUE) {
+ /* Configure register endianess access */
+ dev->accessor_flags |= ACCESS_SWAP;
+ } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
+ /* Configure register access mode 16bit */
+ dev->accessor_flags |= ACCESS_16BIT;
+ } else if (reg != DW_IC_COMP_TYPE_VALUE) {
dev_err(dev->dev, "Unknown Synopsys component type: "
"0x%08x\n", reg);
return -ENODEV;
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 02d1a2ddd853..9c1840ee09c7 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -82,7 +82,7 @@ struct dw_i2c_dev {
unsigned int status;
u32 abort_source;
int irq;
- int swab;
+ u32 accessor_flags;
struct i2c_adapter adapter;
u32 functionality;
u32 master_cfg;
@@ -90,6 +90,9 @@ struct dw_i2c_dev {
unsigned int rx_fifo_depth;
};
+#define ACCESS_SWAP 0x00000001
+#define ACCESS_16BIT 0x00000002
+
extern u32 dw_readl(struct dw_i2c_dev *dev, int offset);
extern void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
extern int i2c_dw_init(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 4ba589ab8614..0506fef8dc00 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -36,6 +36,7 @@
#include <linux/interrupt.h>
#include <linux/of_i2c.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
#include <linux/io.h>
#include <linux/slab.h>
#include "i2c-designware-core.h"
@@ -95,7 +96,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
r = -ENODEV;
goto err_free_mem;
}
- clk_enable(dev->clk);
+ clk_prepare_enable(dev->clk);
dev->functionality =
I2C_FUNC_I2C |
@@ -155,7 +156,7 @@ err_free_irq:
err_iounmap:
iounmap(dev->base);
err_unuse_clocks:
- clk_disable(dev->clk);
+ clk_disable_unprepare(dev->clk);
clk_put(dev->clk);
dev->clk = NULL;
err_free_mem:
@@ -177,7 +178,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev)
i2c_del_adapter(&dev->adapter);
put_device(&pdev->dev);
- clk_disable(dev->clk);
+ clk_disable_unprepare(dev->clk);
clk_put(dev->clk);
dev->clk = NULL;
@@ -198,6 +199,31 @@ static const struct of_device_id dw_i2c_of_match[] = {
MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
#endif
+#ifdef CONFIG_PM
+static int dw_i2c_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(i_dev->clk);
+
+ return 0;
+}
+
+static int dw_i2c_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
+
+ clk_prepare_enable(i_dev->clk);
+ i2c_dw_init(i_dev);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume);
+
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:i2c_designware");
@@ -207,6 +233,7 @@ static struct platform_driver dw_i2c_driver = {
.name = "i2c_designware",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(dw_i2c_of_match),
+ .pm = &dw_i2c_dev_pm_ops,
},
};
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index c811289b61e2..2f74ae872e1e 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -263,11 +263,6 @@ static void pch_i2c_init(struct i2c_algo_pch_data *adap)
init_waitqueue_head(&pch_event);
}
-static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2)
-{
- return cmp1.tv64 < cmp2.tv64;
-}
-
/**
* pch_i2c_wait_for_bus_idle() - check the status of bus.
* @adap: Pointer to struct i2c_algo_pch_data.
@@ -317,33 +312,6 @@ static void pch_i2c_start(struct i2c_algo_pch_data *adap)
}
/**
- * pch_i2c_wait_for_xfer_complete() - initiates a wait for the tx complete event
- * @adap: Pointer to struct i2c_algo_pch_data.
- */
-static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap)
-{
- long ret;
- ret = wait_event_timeout(pch_event,
- (adap->pch_event_flag != 0), msecs_to_jiffies(1000));
-
- if (ret == 0) {
- pch_err(adap, "timeout: %x\n", adap->pch_event_flag);
- adap->pch_event_flag = 0;
- return -ETIMEDOUT;
- }
-
- if (adap->pch_event_flag & I2C_ERROR_MASK) {
- pch_err(adap, "error bits set: %x\n", adap->pch_event_flag);
- adap->pch_event_flag = 0;
- return -EIO;
- }
-
- adap->pch_event_flag = 0;
-
- return 0;
-}
-
-/**
* pch_i2c_getack() - to confirm ACK/NACK
* @adap: Pointer to struct i2c_algo_pch_data.
*/
@@ -373,6 +341,40 @@ static void pch_i2c_stop(struct i2c_algo_pch_data *adap)
pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_START);
}
+static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data *adap)
+{
+ long ret;
+
+ ret = wait_event_timeout(pch_event,
+ (adap->pch_event_flag != 0), msecs_to_jiffies(1000));
+ if (!ret) {
+ pch_err(adap, "%s:wait-event timeout\n", __func__);
+ adap->pch_event_flag = 0;
+ pch_i2c_stop(adap);
+ pch_i2c_init(adap);
+ return -ETIMEDOUT;
+ }
+
+ if (adap->pch_event_flag & I2C_ERROR_MASK) {
+ pch_err(adap, "Lost Arbitration\n");
+ adap->pch_event_flag = 0;
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
+ pch_i2c_init(adap);
+ return -EAGAIN;
+ }
+
+ adap->pch_event_flag = 0;
+
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
/**
* pch_i2c_repstart() - generate repeated start condition in normal mode
* @adap: Pointer to struct i2c_algo_pch_data.
@@ -427,27 +429,12 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
if (first)
pch_i2c_start(adap);
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave address"
- "setting\n");
- return -EIO;
- }
- addr_8_lsb = (addr & I2C_ADDR_MSK);
- iowrite32(addr_8_lsb, p + PCH_I2CDR);
- } else if (rtn == -EIO) { /* Arbitration Lost */
- pch_err(adap, "Lost Arbitration\n");
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMAL_BIT);
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMIF_BIT);
- pch_i2c_init(adap);
- return -EAGAIN;
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
+
+ addr_8_lsb = (addr & I2C_ADDR_MSK);
+ iowrite32(addr_8_lsb, p + PCH_I2CDR);
} else {
/* set 7 bit slave address and R/W bit as 0 */
iowrite32(addr << 1, p + PCH_I2CDR);
@@ -455,44 +442,21 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
pch_i2c_start(adap);
}
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave address"
- "setting\n");
- return -EIO;
- }
- } else if (rtn == -EIO) { /* Arbitration Lost */
- pch_err(adap, "Lost Arbitration\n");
- pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
- pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
- pch_i2c_init(adap);
- return -EAGAIN;
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
for (wrcount = 0; wrcount < length; ++wrcount) {
/* write buffer value to I2C data register */
iowrite32(buf[wrcount], p + PCH_I2CDR);
pch_dbg(adap, "writing %x to Data register\n", buf[wrcount]);
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave address"
- "setting\n");
- return -EIO;
- }
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMCF_BIT);
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMIF_BIT);
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
+
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMCF_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
}
/* check if this is the last message */
@@ -580,50 +544,21 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
if (first)
pch_i2c_start(adap);
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave address"
- "setting\n");
- return -EIO;
- }
- addr_8_lsb = (addr & I2C_ADDR_MSK);
- iowrite32(addr_8_lsb, p + PCH_I2CDR);
- } else if (rtn == -EIO) { /* Arbitration Lost */
- pch_err(adap, "Lost Arbitration\n");
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMAL_BIT);
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMIF_BIT);
- pch_i2c_init(adap);
- return -EAGAIN;
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
+
+ addr_8_lsb = (addr & I2C_ADDR_MSK);
+ iowrite32(addr_8_lsb, p + PCH_I2CDR);
+
pch_i2c_restart(adap);
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave address"
- "setting\n");
- return -EIO;
- }
- addr_2_msb |= I2C_RD;
- iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK,
- p + PCH_I2CDR);
- } else if (rtn == -EIO) { /* Arbitration Lost */
- pch_err(adap, "Lost Arbitration\n");
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMAL_BIT);
- pch_clrbit(adap->pch_base_address, PCH_I2CSR,
- I2CMIF_BIT);
- pch_i2c_init(adap);
- return -EAGAIN;
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
+
+ addr_2_msb |= I2C_RD;
+ iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
} else {
/* 7 address bits + R/W bit */
addr = (((addr) << 1) | (I2C_RD));
@@ -634,23 +569,9 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
if (first)
pch_i2c_start(adap);
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave address"
- "setting\n");
- return -EIO;
- }
- } else if (rtn == -EIO) { /* Arbitration Lost */
- pch_err(adap, "Lost Arbitration\n");
- pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
- pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
- pch_i2c_init(adap);
- return -EAGAIN;
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
if (length == 0) {
pch_i2c_stop(adap);
@@ -669,18 +590,9 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
if (loop != 1)
read_index++;
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave"
- "address setting\n");
- return -EIO;
- }
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
-
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
} /* end for */
pch_i2c_sendnack(adap);
@@ -690,17 +602,9 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
if (length != 1)
read_index++;
- rtn = pch_i2c_wait_for_xfer_complete(adap);
- if (rtn == 0) {
- if (pch_i2c_getack(adap)) {
- pch_dbg(adap, "Receive NACK for slave"
- "address setting\n");
- return -EIO;
- }
- } else { /* wait-event timeout */
- pch_i2c_stop(adap);
- return -ETIME;
- }
+ rtn = pch_i2c_wait_for_check_xfer(adap);
+ if (rtn)
+ return rtn;
if (last)
pch_i2c_stop(adap);
@@ -790,7 +694,7 @@ static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap,
ret = mutex_lock_interruptible(&pch_mutex);
if (ret)
- return -ERESTARTSYS;
+ return ret;
if (adap->p_adapter_info->pch_i2c_suspended) {
mutex_unlock(&pch_mutex);
@@ -909,7 +813,7 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
pch_adap->owner = THIS_MODULE;
pch_adap->class = I2C_CLASS_HWMON;
- strcpy(pch_adap->name, KBUILD_MODNAME);
+ strlcpy(pch_adap->name, KBUILD_MODNAME, sizeof(pch_adap->name));
pch_adap->algo = &pch_algorithm;
pch_adap->algo_data = &adap_info->pch_data[i];
@@ -963,7 +867,7 @@ static void __devexit pch_i2c_remove(struct pci_dev *pdev)
pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address);
for (i = 0; i < adap_info->ch_num; i++)
- adap_info->pch_data[i].pch_base_address = 0;
+ adap_info->pch_data[i].pch_base_address = NULL;
pci_set_drvdata(pdev, NULL);
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index c0330a41db03..e62d2d938628 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -190,12 +190,7 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev)
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
- /*
- * If "dev->id" is negative we consider it as zero.
- * The reason to do so is to avoid sysfs names that only make
- * sense when there are multiple adapters.
- */
- adap->nr = (pdev->id != -1) ? pdev->id : 0;
+ adap->nr = pdev->id;
ret = i2c_bit_add_numbered_bus(adap);
if (ret)
goto err_add_bus;
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 56bce9a8bcbb..8d6b504d65c4 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -512,7 +512,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
}
/* Setup i2c_imx driver structure */
- strcpy(i2c_imx->adapter.name, pdev->name);
+ strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
i2c_imx->adapter.owner = THIS_MODULE;
i2c_imx->adapter.algo = &i2c_imx_algo;
i2c_imx->adapter.dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
deleted file mode 100644
index 5d263f9014d6..000000000000
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * drivers/i2c/busses/i2c-ixp2000.c
- *
- * I2C adapter for IXP2000 systems using GPIOs for I2C bus
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- * Based on IXDP2400 code by: Naeem M. Afzal <naeem.m.afzal@intel.com>
- * Made generic by: Jeff Daly <jeffrey.daly@intel.com>
- *
- * Copyright (c) 2003-2004 MontaVista Software Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * From Jeff Daly:
- *
- * I2C adapter driver for Intel IXDP2xxx platforms. This should work for any
- * IXP2000 platform if it uses the HW GPIO in the same manner. Basically,
- * SDA and SCL GPIOs have external pullups. Setting the respective GPIO to
- * an input will make the signal a '1' via the pullup. Setting them to
- * outputs will pull them down.
- *
- * The GPIOs are open drain signals and are used as configuration strap inputs
- * during power-up so there's generally a buffer on the board that needs to be
- * 'enabled' to drive the GPIOs.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/slab.h>
-
-#include <mach/hardware.h> /* Pick up IXP2000-specific bits */
-#include <mach/gpio-ixp2000.h>
-
-static inline int ixp2000_scl_pin(void *data)
-{
- return ((struct ixp2000_i2c_pins*)data)->scl_pin;
-}
-
-static inline int ixp2000_sda_pin(void *data)
-{
- return ((struct ixp2000_i2c_pins*)data)->sda_pin;
-}
-
-
-static void ixp2000_bit_setscl(void *data, int val)
-{
- int i = 5000;
-
- if (val) {
- gpio_line_config(ixp2000_scl_pin(data), GPIO_IN);
- while(!gpio_line_get(ixp2000_scl_pin(data)) && i--);
- } else {
- gpio_line_config(ixp2000_scl_pin(data), GPIO_OUT);
- }
-}
-
-static void ixp2000_bit_setsda(void *data, int val)
-{
- if (val) {
- gpio_line_config(ixp2000_sda_pin(data), GPIO_IN);
- } else {
- gpio_line_config(ixp2000_sda_pin(data), GPIO_OUT);
- }
-}
-
-static int ixp2000_bit_getscl(void *data)
-{
- return gpio_line_get(ixp2000_scl_pin(data));
-}
-
-static int ixp2000_bit_getsda(void *data)
-{
- return gpio_line_get(ixp2000_sda_pin(data));
-}
-
-struct ixp2000_i2c_data {
- struct ixp2000_i2c_pins *gpio_pins;
- struct i2c_adapter adapter;
- struct i2c_algo_bit_data algo_data;
-};
-
-static int ixp2000_i2c_remove(struct platform_device *plat_dev)
-{
- struct ixp2000_i2c_data *drv_data = platform_get_drvdata(plat_dev);
-
- platform_set_drvdata(plat_dev, NULL);
-
- i2c_del_adapter(&drv_data->adapter);
-
- kfree(drv_data);
-
- return 0;
-}
-
-static int ixp2000_i2c_probe(struct platform_device *plat_dev)
-{
- int err;
- struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data;
- struct ixp2000_i2c_data *drv_data =
- kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
-
- if (!drv_data)
- return -ENOMEM;
- drv_data->gpio_pins = gpio;
-
- drv_data->algo_data.data = gpio;
- drv_data->algo_data.setsda = ixp2000_bit_setsda;
- drv_data->algo_data.setscl = ixp2000_bit_setscl;
- drv_data->algo_data.getsda = ixp2000_bit_getsda;
- drv_data->algo_data.getscl = ixp2000_bit_getscl;
- drv_data->algo_data.udelay = 6;
- drv_data->algo_data.timeout = HZ;
-
- strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
- sizeof(drv_data->adapter.name));
- drv_data->adapter.algo_data = &drv_data->algo_data,
-
- drv_data->adapter.dev.parent = &plat_dev->dev;
-
- gpio_line_config(gpio->sda_pin, GPIO_IN);
- gpio_line_config(gpio->scl_pin, GPIO_IN);
- gpio_line_set(gpio->scl_pin, 0);
- gpio_line_set(gpio->sda_pin, 0);
-
- if ((err = i2c_bit_add_bus(&drv_data->adapter)) != 0) {
- dev_err(&plat_dev->dev, "Could not install, error %d\n", err);
- kfree(drv_data);
- return err;
- }
-
- platform_set_drvdata(plat_dev, drv_data);
-
- return 0;
-}
-
-static struct platform_driver ixp2000_i2c_driver = {
- .probe = ixp2000_i2c_probe,
- .remove = ixp2000_i2c_remove,
- .driver = {
- .name = "IXP2000-I2C",
- .owner = THIS_MODULE,
- },
-};
-
-module_platform_driver(ixp2000_i2c_driver);
-
-MODULE_AUTHOR ("Deepak Saxena <dsaxena@plexity.net>");
-MODULE_DESCRIPTION("IXP2000 GPIO-based I2C bus driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:IXP2000-I2C");
-
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 206caacd30d7..b76731edbf10 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -64,6 +64,9 @@ struct mpc_i2c {
struct i2c_adapter adap;
int irq;
u32 real_clk;
+#ifdef CONFIG_PM
+ u8 fdr, dfsrr;
+#endif
};
struct mpc_i2c_divider {
@@ -703,6 +706,30 @@ static int __devexit fsl_i2c_remove(struct platform_device *op)
return 0;
};
+#ifdef CONFIG_PM
+static int mpc_i2c_suspend(struct device *dev)
+{
+ struct mpc_i2c *i2c = dev_get_drvdata(dev);
+
+ i2c->fdr = readb(i2c->base + MPC_I2C_FDR);
+ i2c->dfsrr = readb(i2c->base + MPC_I2C_DFSRR);
+
+ return 0;
+}
+
+static int mpc_i2c_resume(struct device *dev)
+{
+ struct mpc_i2c *i2c = dev_get_drvdata(dev);
+
+ writeb(i2c->fdr, i2c->base + MPC_I2C_FDR);
+ writeb(i2c->dfsrr, i2c->base + MPC_I2C_DFSRR);
+
+ return 0;
+}
+
+SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
+#endif
+
static struct mpc_i2c_data mpc_i2c_data_512x __devinitdata = {
.setup = mpc_i2c_setup_512x,
};
@@ -747,6 +774,9 @@ static struct platform_driver mpc_i2c_driver = {
.owner = THIS_MODULE,
.name = DRV_NAME,
.of_match_table = mpc_i2c_of_match,
+#ifdef CONFIG_PM
+ .pm = &mpc_i2c_pm_ops,
+#endif
},
};
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 18068dee48f1..75194c579b6d 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -55,6 +55,7 @@
#include <linux/i2c-ocores.h>
#include <linux/slab.h>
#include <linux/io.h>
+#include <linux/of_i2c.h>
struct ocores_i2c {
void __iomem *base;
@@ -343,6 +344,8 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
if (pdata) {
for (i = 0; i < pdata->num_devices; i++)
i2c_new_device(&i2c->adap, pdata->devices + i);
+ } else {
+ of_i2c_register_devices(&i2c->adap);
}
return 0;
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 2adbf1a8fdea..675878f49f76 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -171,7 +171,7 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev)
i2c->io_size = resource_size(res);
i2c->irq = irq;
- i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0;
+ i2c->adap.nr = pdev->id;
i2c->adap.owner = THIS_MODULE;
snprintf(i2c->adap.name, sizeof(i2c->adap.name),
"PCA9564/PCA9665 at 0x%08lx",
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index f6733267fa9c..a997c7d3f95d 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1131,11 +1131,6 @@ static int i2c_pxa_probe(struct platform_device *dev)
spin_lock_init(&i2c->lock);
init_waitqueue_head(&i2c->wait);
- /*
- * If "dev->id" is negative we consider it as zero.
- * The reason to do so is to avoid sysfs names that only make
- * sense when there are multiple adapters.
- */
i2c->adap.nr = dev->id;
snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u",
i2c->adap.nr);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 737f7218a32c..fa0b13490873 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -44,8 +44,12 @@
#include <plat/regs-iic.h>
#include <plat/iic.h>
-/* i2c controller state */
+/* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
+#define QUIRK_S3C2440 (1 << 0)
+#define QUIRK_HDMIPHY (1 << 1)
+#define QUIRK_NO_GPIO (1 << 2)
+/* i2c controller state */
enum s3c24xx_i2c_state {
STATE_IDLE,
STATE_START,
@@ -54,14 +58,10 @@ enum s3c24xx_i2c_state {
STATE_STOP
};
-enum s3c24xx_i2c_type {
- TYPE_S3C2410,
- TYPE_S3C2440,
-};
-
struct s3c24xx_i2c {
spinlock_t lock;
wait_queue_head_t wait;
+ unsigned int quirks;
unsigned int suspended:1;
struct i2c_msg *msg;
@@ -88,26 +88,45 @@ struct s3c24xx_i2c {
#endif
};
-/* default platform data removed, dev should always carry data. */
+static struct platform_device_id s3c24xx_driver_ids[] = {
+ {
+ .name = "s3c2410-i2c",
+ .driver_data = 0,
+ }, {
+ .name = "s3c2440-i2c",
+ .driver_data = QUIRK_S3C2440,
+ }, {
+ .name = "s3c2440-hdmiphy-i2c",
+ .driver_data = QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO,
+ }, { },
+};
+MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id s3c24xx_i2c_match[] = {
+ { .compatible = "samsung,s3c2410-i2c", .data = (void *)0 },
+ { .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
+ { .compatible = "samsung,s3c2440-hdmiphy-i2c",
+ .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
+ {},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
+#endif
-/* s3c24xx_i2c_is2440()
+/* s3c24xx_get_device_quirks
*
- * return true is this is an s3c2440
+ * Get controller type either from device tree or platform device variant.
*/
-static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
+static inline unsigned int s3c24xx_get_device_quirks(struct platform_device *pdev)
{
- struct platform_device *pdev = to_platform_device(i2c->dev);
- enum s3c24xx_i2c_type type;
-
-#ifdef CONFIG_OF
- if (i2c->dev->of_node)
- return of_device_is_compatible(i2c->dev->of_node,
- "samsung,s3c2440-i2c");
-#endif
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(&s3c24xx_i2c_match, pdev->dev.of_node);
+ return (unsigned int)match->data;
+ }
- type = platform_get_device_id(pdev)->driver_data;
- return type == TYPE_S3C2440;
+ return platform_get_device_id(pdev)->driver_data;
}
/* s3c24xx_i2c_master_complete
@@ -471,6 +490,13 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
unsigned long iicstat;
int timeout = 400;
+ /* the timeout for HDMIPHY is reduced to 10 ms because
+ * the hangup is expected to happen, so waiting 400 ms
+ * causes only unnecessary system hangup
+ */
+ if (i2c->quirks & QUIRK_HDMIPHY)
+ timeout = 10;
+
while (timeout-- > 0) {
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
@@ -480,6 +506,15 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
msleep(1);
}
+ /* hang-up of bus dedicated for HDMIPHY occurred, resetting */
+ if (i2c->quirks & QUIRK_HDMIPHY) {
+ writel(0, i2c->regs + S3C2410_IICCON);
+ writel(0, i2c->regs + S3C2410_IICSTAT);
+ writel(0, i2c->regs + S3C2410_IICDS);
+
+ return 0;
+ }
+
return -ETIMEDOUT;
}
@@ -676,7 +711,7 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
writel(iiccon, i2c->regs + S3C2410_IICCON);
- if (s3c24xx_i2c_is2440(i2c)) {
+ if (i2c->quirks & QUIRK_S3C2440) {
unsigned long sda_delay;
if (pdata->sda_delay) {
@@ -761,6 +796,9 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
{
int idx, gpio, ret;
+ if (i2c->quirks & QUIRK_NO_GPIO)
+ return 0;
+
for (idx = 0; idx < 2; idx++) {
gpio = of_get_gpio(i2c->dev->of_node, idx);
if (!gpio_is_valid(gpio)) {
@@ -785,6 +823,10 @@ free_gpio:
static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
{
unsigned int idx;
+
+ if (i2c->quirks & QUIRK_NO_GPIO)
+ return;
+
for (idx = 0; idx < 2; idx++)
gpio_free(i2c->gpios[idx]);
}
@@ -906,6 +948,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
goto err_noclk;
}
+ i2c->quirks = s3c24xx_get_device_quirks(pdev);
if (pdata)
memcpy(i2c->pdata, pdata, sizeof(*pdata));
else
@@ -1110,28 +1153,6 @@ static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
/* device driver for platform bus bits */
-static struct platform_device_id s3c24xx_driver_ids[] = {
- {
- .name = "s3c2410-i2c",
- .driver_data = TYPE_S3C2410,
- }, {
- .name = "s3c2440-i2c",
- .driver_data = TYPE_S3C2440,
- }, { },
-};
-MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
-
-#ifdef CONFIG_OF
-static const struct of_device_id s3c24xx_i2c_match[] = {
- { .compatible = "samsung,s3c2410-i2c" },
- { .compatible = "samsung,s3c2440-i2c" },
- {},
-};
-MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
-#else
-#define s3c24xx_i2c_match NULL
-#endif
-
static struct platform_driver s3c24xx_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
@@ -1140,7 +1161,7 @@ static struct platform_driver s3c24xx_i2c_driver = {
.owner = THIS_MODULE,
.name = "s3c-i2c",
.pm = S3C24XX_DEV_PM_OPS,
- .of_match_table = s3c24xx_i2c_match,
+ .of_match_table = of_match_ptr(s3c24xx_i2c_match),
},
};
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 675c9692d148..8110ca45f342 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -27,6 +27,7 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
+#include <linux/of_i2c.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <linux/clk.h>
@@ -653,6 +654,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
adap->dev.parent = &dev->dev;
adap->retries = 5;
adap->nr = dev->id;
+ adap->dev.of_node = dev->dev.of_node;
strlcpy(adap->name, dev->name, sizeof(adap->name));
@@ -667,6 +669,8 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
dev_info(&dev->dev, "I2C adapter %d with bus speed %lu Hz\n",
adap->nr, pd->bus_speed);
+
+ of_i2c_register_devices(adap);
return 0;
err_all:
@@ -710,11 +714,18 @@ static const struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = {
.runtime_resume = sh_mobile_i2c_runtime_nop,
};
+static const struct of_device_id sh_mobile_i2c_dt_ids[] __devinitconst = {
+ { .compatible = "renesas,rmobile-iic", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids);
+
static struct platform_driver sh_mobile_i2c_driver = {
.driver = {
.name = "i2c-sh_mobile",
.owner = THIS_MODULE,
.pm = &sh_mobile_i2c_dev_pm_ops,
+ .of_match_table = sh_mobile_i2c_dt_ids,
},
.probe = sh_mobile_i2c_probe,
.remove = sh_mobile_i2c_remove,
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 55e5ea62ccee..8b2e555a9563 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -401,8 +401,6 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
disable_irq_nosync(i2c_dev->irq);
i2c_dev->irq_disabled = 1;
}
-
- complete(&i2c_dev->msg_complete);
goto err;
}
@@ -411,7 +409,6 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
i2c_dev->msg_err |= I2C_ERR_NO_ACK;
if (status & I2C_INT_ARBITRATION_LOST)
i2c_dev->msg_err |= I2C_ERR_ARBITRATION_LOST;
- complete(&i2c_dev->msg_complete);
goto err;
}
@@ -429,14 +426,14 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ);
}
+ i2c_writel(i2c_dev, status, I2C_INT_STATUS);
+ if (i2c_dev->is_dvc)
+ dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
+
if (status & I2C_INT_PACKET_XFER_COMPLETE) {
BUG_ON(i2c_dev->msg_buf_remaining);
complete(&i2c_dev->msg_complete);
}
-
- i2c_writel(i2c_dev, status, I2C_INT_STATUS);
- if (i2c_dev->is_dvc)
- dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
return IRQ_HANDLED;
err:
/* An error occurred, mask all interrupts */
@@ -446,6 +443,8 @@ err:
i2c_writel(i2c_dev, status, I2C_INT_STATUS);
if (i2c_dev->is_dvc)
dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
+
+ complete(&i2c_dev->msg_complete);
return IRQ_HANDLED;
}
@@ -476,12 +475,15 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
packet_header = msg->len - 1;
i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
- packet_header = msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
- packet_header |= I2C_HEADER_IE_ENABLE;
+ packet_header = I2C_HEADER_IE_ENABLE;
if (!stop)
packet_header |= I2C_HEADER_REPEAT_START;
- if (msg->flags & I2C_M_TEN)
+ if (msg->flags & I2C_M_TEN) {
+ packet_header |= msg->addr;
packet_header |= I2C_HEADER_10BIT_ADDR;
+ } else {
+ packet_header |= msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
+ }
if (msg->flags & I2C_M_IGNORE_NAK)
packet_header |= I2C_HEADER_CONT_ON_NAK;
if (msg->flags & I2C_M_RD)
@@ -557,7 +559,7 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
static u32 tegra_i2c_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
}
static const struct i2c_algorithm tegra_i2c_algo = {
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index f585aead50cc..eec20db6246f 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -104,13 +104,8 @@ static int i2c_versatile_probe(struct platform_device *dev)
i2c->algo = i2c_versatile_algo;
i2c->algo.data = i2c;
- if (dev->id >= 0) {
- /* static bus numbering */
- i2c->adap.nr = dev->id;
- ret = i2c_bit_add_numbered_bus(&i2c->adap);
- } else
- /* dynamic bus numbering */
- ret = i2c_bit_add_bus(&i2c->adap);
+ i2c->adap.nr = dev->id;
+ ret = i2c_bit_add_numbered_bus(&i2c->adap);
if (ret >= 0) {
platform_set_drvdata(dev, i2c);
of_i2c_register_devices(&i2c->adap);
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 2bded7647ef2..641d0e5e3303 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -40,6 +40,7 @@
#include <linux/i2c-xiic.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/of_i2c.h>
#define DRIVER_NAME "xiic-i2c"
@@ -705,8 +706,6 @@ static int __devinit xiic_i2c_probe(struct platform_device *pdev)
goto resource_missing;
pdata = (struct xiic_i2c_platform_data *) pdev->dev.platform_data;
- if (!pdata)
- return -EINVAL;
i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
if (!i2c)
@@ -730,6 +729,7 @@ static int __devinit xiic_i2c_probe(struct platform_device *pdev)
i2c->adap = xiic_adapter;
i2c_set_adapdata(&i2c->adap, i2c);
i2c->adap.dev.parent = &pdev->dev;
+ i2c->adap.dev.of_node = pdev->dev.of_node;
xiic_reinit(i2c);
@@ -748,9 +748,13 @@ static int __devinit xiic_i2c_probe(struct platform_device *pdev)
goto add_adapter_failed;
}
- /* add in known devices to the bus */
- for (i = 0; i < pdata->num_devices; i++)
- i2c_new_device(&i2c->adap, pdata->devices + i);
+ if (pdata) {
+ /* add in known devices to the bus */
+ for (i = 0; i < pdata->num_devices; i++)
+ i2c_new_device(&i2c->adap, pdata->devices + i);
+ }
+
+ of_i2c_register_devices(&i2c->adap);
return 0;
@@ -795,12 +799,21 @@ static int __devexit xiic_i2c_remove(struct platform_device* pdev)
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id xiic_of_match[] __devinitconst = {
+ { .compatible = "xlnx,xps-iic-2.00.a", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, xiic_of_match);
+#endif
+
static struct platform_driver xiic_i2c_driver = {
.probe = xiic_i2c_probe,
.remove = __devexit_p(xiic_i2c_remove),
.driver = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(xiic_of_match),
},
};
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index feb7dc359186..a6ad32bc0a96 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -772,6 +772,23 @@ struct device_type i2c_adapter_type = {
};
EXPORT_SYMBOL_GPL(i2c_adapter_type);
+/**
+ * i2c_verify_adapter - return parameter as i2c_adapter or NULL
+ * @dev: device, probably from some driver model iterator
+ *
+ * When traversing the driver model tree, perhaps using driver model
+ * iterators like @device_for_each_child(), you can't assume very much
+ * about the nodes you find. Use this function to avoid oopses caused
+ * by wrongly treating some non-I2C device as an i2c_adapter.
+ */
+struct i2c_adapter *i2c_verify_adapter(struct device *dev)
+{
+ return (dev->type == &i2c_adapter_type)
+ ? to_i2c_adapter(dev)
+ : NULL;
+}
+EXPORT_SYMBOL(i2c_verify_adapter);
+
#ifdef CONFIG_I2C_COMPAT
static struct class_compat *i2c_adapter_compat_class;
#endif
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index d7a4833be416..1038c381aea5 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -24,6 +24,8 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
+#include <linux/of.h>
+#include <linux/of_i2c.h>
/* multiplexer per channel data */
struct i2c_mux_priv {
@@ -31,11 +33,11 @@ struct i2c_mux_priv {
struct i2c_algorithm algo;
struct i2c_adapter *parent;
- void *mux_dev; /* the mux chip/device */
+ void *mux_priv; /* the mux chip/device */
u32 chan_id; /* the channel id */
- int (*select)(struct i2c_adapter *, void *mux_dev, u32 chan_id);
- int (*deselect)(struct i2c_adapter *, void *mux_dev, u32 chan_id);
+ int (*select)(struct i2c_adapter *, void *mux_priv, u32 chan_id);
+ int (*deselect)(struct i2c_adapter *, void *mux_priv, u32 chan_id);
};
static int i2c_mux_master_xfer(struct i2c_adapter *adap,
@@ -47,11 +49,11 @@ static int i2c_mux_master_xfer(struct i2c_adapter *adap,
/* Switch to the right mux port and perform the transfer. */
- ret = priv->select(parent, priv->mux_dev, priv->chan_id);
+ ret = priv->select(parent, priv->mux_priv, priv->chan_id);
if (ret >= 0)
ret = parent->algo->master_xfer(parent, msgs, num);
if (priv->deselect)
- priv->deselect(parent, priv->mux_dev, priv->chan_id);
+ priv->deselect(parent, priv->mux_priv, priv->chan_id);
return ret;
}
@@ -67,12 +69,12 @@ static int i2c_mux_smbus_xfer(struct i2c_adapter *adap,
/* Select the right mux port and perform the transfer. */
- ret = priv->select(parent, priv->mux_dev, priv->chan_id);
+ ret = priv->select(parent, priv->mux_priv, priv->chan_id);
if (ret >= 0)
ret = parent->algo->smbus_xfer(parent, addr, flags,
read_write, command, size, data);
if (priv->deselect)
- priv->deselect(parent, priv->mux_dev, priv->chan_id);
+ priv->deselect(parent, priv->mux_priv, priv->chan_id);
return ret;
}
@@ -87,7 +89,8 @@ static u32 i2c_mux_functionality(struct i2c_adapter *adap)
}
struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
- void *mux_dev, u32 force_nr, u32 chan_id,
+ struct device *mux_dev,
+ void *mux_priv, u32 force_nr, u32 chan_id,
int (*select) (struct i2c_adapter *,
void *, u32),
int (*deselect) (struct i2c_adapter *,
@@ -102,7 +105,7 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
/* Set up private adapter data */
priv->parent = parent;
- priv->mux_dev = mux_dev;
+ priv->mux_priv = mux_priv;
priv->chan_id = chan_id;
priv->select = select;
priv->deselect = deselect;
@@ -124,6 +127,25 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
priv->adap.algo_data = priv;
priv->adap.dev.parent = &parent->dev;
+ /*
+ * Try to populate the mux adapter's of_node, expands to
+ * nothing if !CONFIG_OF.
+ */
+ if (mux_dev->of_node) {
+ struct device_node *child;
+ u32 reg;
+
+ for_each_child_of_node(mux_dev->of_node, child) {
+ ret = of_property_read_u32(child, "reg", &reg);
+ if (ret)
+ continue;
+ if (chan_id == reg) {
+ priv->adap.dev.of_node = child;
+ break;
+ }
+ }
+ }
+
if (force_nr) {
priv->adap.nr = force_nr;
ret = i2c_add_numbered_adapter(&priv->adap);
@@ -141,6 +163,8 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
i2c_adapter_id(&priv->adap));
+ of_i2c_register_devices(&priv->adap);
+
return &priv->adap;
}
EXPORT_SYMBOL_GPL(i2c_add_mux_adapter);
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index 90b7a0163899..beb2491db274 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -15,7 +15,7 @@ config I2C_MUX_GPIO
through GPIO pins.
This driver can also be built as a module. If so, the module
- will be called gpio-i2cmux.
+ will be called i2c-mux-gpio.
config I2C_MUX_PCA9541
tristate "NXP PCA9541 I2C Master Selector"
@@ -25,7 +25,7 @@ config I2C_MUX_PCA9541
I2C Master Selector.
This driver can also be built as a module. If so, the module
- will be called pca9541.
+ will be called i2c-mux-pca9541.
config I2C_MUX_PCA954x
tristate "Philips PCA954x I2C Mux/switches"
@@ -35,6 +35,6 @@ config I2C_MUX_PCA954x
I2C mux/switch devices.
This driver can also be built as a module. If so, the module
- will be called pca954x.
+ will be called i2c-mux-pca954x.
endmenu
diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
index 4640436ea61f..5826249b29ca 100644
--- a/drivers/i2c/muxes/Makefile
+++ b/drivers/i2c/muxes/Makefile
@@ -1,8 +1,8 @@
#
# Makefile for multiplexer I2C chip drivers.
-obj-$(CONFIG_I2C_MUX_GPIO) += gpio-i2cmux.o
-obj-$(CONFIG_I2C_MUX_PCA9541) += pca9541.o
-obj-$(CONFIG_I2C_MUX_PCA954x) += pca954x.o
+obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o
+obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
+obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/drivers/i2c/muxes/gpio-i2cmux.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index e5fa695eb0fa..68b1f8ec3436 100644
--- a/drivers/i2c/muxes/gpio-i2cmux.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -10,7 +10,7 @@
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
-#include <linux/gpio-i2cmux.h>
+#include <linux/i2c-mux-gpio.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/module.h>
@@ -20,10 +20,10 @@
struct gpiomux {
struct i2c_adapter *parent;
struct i2c_adapter **adap; /* child busses */
- struct gpio_i2cmux_platform_data data;
+ struct i2c_mux_gpio_platform_data data;
};
-static void gpiomux_set(const struct gpiomux *mux, unsigned val)
+static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
{
int i;
@@ -31,28 +31,28 @@ static void gpiomux_set(const struct gpiomux *mux, unsigned val)
gpio_set_value(mux->data.gpios[i], val & (1 << i));
}
-static int gpiomux_select(struct i2c_adapter *adap, void *data, u32 chan)
+static int i2c_mux_gpio_select(struct i2c_adapter *adap, void *data, u32 chan)
{
struct gpiomux *mux = data;
- gpiomux_set(mux, mux->data.values[chan]);
+ i2c_mux_gpio_set(mux, mux->data.values[chan]);
return 0;
}
-static int gpiomux_deselect(struct i2c_adapter *adap, void *data, u32 chan)
+static int i2c_mux_gpio_deselect(struct i2c_adapter *adap, void *data, u32 chan)
{
struct gpiomux *mux = data;
- gpiomux_set(mux, mux->data.idle);
+ i2c_mux_gpio_set(mux, mux->data.idle);
return 0;
}
-static int __devinit gpiomux_probe(struct platform_device *pdev)
+static int __devinit i2c_mux_gpio_probe(struct platform_device *pdev)
{
struct gpiomux *mux;
- struct gpio_i2cmux_platform_data *pdata;
+ struct i2c_mux_gpio_platform_data *pdata;
struct i2c_adapter *parent;
int (*deselect) (struct i2c_adapter *, void *, u32);
unsigned initial_state;
@@ -86,16 +86,16 @@ static int __devinit gpiomux_probe(struct platform_device *pdev)
goto alloc_failed2;
}
- if (pdata->idle != GPIO_I2CMUX_NO_IDLE) {
+ if (pdata->idle != I2C_MUX_GPIO_NO_IDLE) {
initial_state = pdata->idle;
- deselect = gpiomux_deselect;
+ deselect = i2c_mux_gpio_deselect;
} else {
initial_state = pdata->values[0];
deselect = NULL;
}
for (i = 0; i < pdata->n_gpios; i++) {
- ret = gpio_request(pdata->gpios[i], "gpio-i2cmux");
+ ret = gpio_request(pdata->gpios[i], "i2c-mux-gpio");
if (ret)
goto err_request_gpio;
gpio_direction_output(pdata->gpios[i],
@@ -105,8 +105,8 @@ static int __devinit gpiomux_probe(struct platform_device *pdev)
for (i = 0; i < pdata->n_values; i++) {
u32 nr = pdata->base_nr ? (pdata->base_nr + i) : 0;
- mux->adap[i] = i2c_add_mux_adapter(parent, mux, nr, i,
- gpiomux_select, deselect);
+ mux->adap[i] = i2c_add_mux_adapter(parent, &pdev->dev, mux, nr, i,
+ i2c_mux_gpio_select, deselect);
if (!mux->adap[i]) {
ret = -ENODEV;
dev_err(&pdev->dev, "Failed to add adapter %d\n", i);
@@ -137,7 +137,7 @@ alloc_failed:
return ret;
}
-static int __devexit gpiomux_remove(struct platform_device *pdev)
+static int __devexit i2c_mux_gpio_remove(struct platform_device *pdev)
{
struct gpiomux *mux = platform_get_drvdata(pdev);
int i;
@@ -156,18 +156,18 @@ static int __devexit gpiomux_remove(struct platform_device *pdev)
return 0;
}
-static struct platform_driver gpiomux_driver = {
- .probe = gpiomux_probe,
- .remove = __devexit_p(gpiomux_remove),
+static struct platform_driver i2c_mux_gpio_driver = {
+ .probe = i2c_mux_gpio_probe,
+ .remove = __devexit_p(i2c_mux_gpio_remove),
.driver = {
.owner = THIS_MODULE,
- .name = "gpio-i2cmux",
+ .name = "i2c-mux-gpio",
},
};
-module_platform_driver(gpiomux_driver);
+module_platform_driver(i2c_mux_gpio_driver);
MODULE_DESCRIPTION("GPIO-based I2C multiplexer driver");
MODULE_AUTHOR("Peter Korsgaard <peter.korsgaard@barco.com>");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:gpio-i2cmux");
+MODULE_ALIAS("platform:i2c-mux-gpio");
diff --git a/drivers/i2c/muxes/pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
index e0df9b6c66b3..8aacde1516ac 100644
--- a/drivers/i2c/muxes/pca9541.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -353,7 +353,8 @@ static int pca9541_probe(struct i2c_client *client,
force = 0;
if (pdata)
force = pdata->modes[0].adap_id;
- data->mux_adap = i2c_add_mux_adapter(adap, client, force, 0,
+ data->mux_adap = i2c_add_mux_adapter(adap, &client->dev, client,
+ force, 0,
pca9541_select_chan,
pca9541_release_chan);
diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 0e37ef27aa12..f2dfe0d8fcce 100644
--- a/drivers/i2c/muxes/pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -226,7 +226,7 @@ static int pca954x_probe(struct i2c_client *client,
}
data->virt_adaps[num] =
- i2c_add_mux_adapter(adap, client,
+ i2c_add_mux_adapter(adap, &client->dev, client,
force, num, pca954x_select_chan,
(pdata && pdata->modes[num].deselect_on_exit)
? pca954x_deselect_mux : NULL);
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index f37fbeb66a44..1e173f357674 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -90,8 +90,22 @@ struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
if (!dev)
return NULL;
- return to_i2c_client(dev);
+ return i2c_verify_client(dev);
}
EXPORT_SYMBOL(of_find_i2c_device_by_node);
+/* must call put_device() when done with returned i2c_adapter device */
+struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, node,
+ of_dev_node_match);
+ if (!dev)
+ return NULL;
+
+ return i2c_verify_adapter(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
+
MODULE_LICENSE("GPL");
diff --git a/include/linux/gpio-i2cmux.h b/include/linux/i2c-mux-gpio.h
index 4a333bb0bd0d..a36343a37ebc 100644
--- a/include/linux/gpio-i2cmux.h
+++ b/include/linux/i2c-mux-gpio.h
@@ -1,5 +1,5 @@
/*
- * gpio-i2cmux interface to platform code
+ * i2c-mux-gpio interface to platform code
*
* Peter Korsgaard <peter.korsgaard@barco.com>
*
@@ -8,14 +8,14 @@
* published by the Free Software Foundation.
*/
-#ifndef _LINUX_GPIO_I2CMUX_H
-#define _LINUX_GPIO_I2CMUX_H
+#ifndef _LINUX_I2C_MUX_GPIO_H
+#define _LINUX_I2C_MUX_GPIO_H
/* MUX has no specific idle mode */
-#define GPIO_I2CMUX_NO_IDLE ((unsigned)-1)
+#define I2C_MUX_GPIO_NO_IDLE ((unsigned)-1)
/**
- * struct gpio_i2cmux_platform_data - Platform-dependent data for gpio-i2cmux
+ * struct i2c_mux_gpio_platform_data - Platform-dependent data for i2c-mux-gpio
* @parent: Parent I2C bus adapter number
* @base_nr: Base I2C bus number to number adapters from or zero for dynamic
* @values: Array of bitmasks of GPIO settings (low/high) for each
@@ -25,7 +25,7 @@
* @n_gpios: Number of GPIOs used to control MUX
* @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used
*/
-struct gpio_i2cmux_platform_data {
+struct i2c_mux_gpio_platform_data {
int parent;
int base_nr;
const unsigned *values;
@@ -35,4 +35,4 @@ struct gpio_i2cmux_platform_data {
unsigned idle;
};
-#endif /* _LINUX_GPIO_I2CMUX_H */
+#endif /* _LINUX_I2C_MUX_GPIO_H */
diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h
index 747f0cde4164..c79083830014 100644
--- a/include/linux/i2c-mux.h
+++ b/include/linux/i2c-mux.h
@@ -34,7 +34,8 @@
* mux control.
*/
struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
- void *mux_dev, u32 force_nr, u32 chan_id,
+ struct device *mux_dev,
+ void *mux_priv, u32 force_nr, u32 chan_id,
int (*select) (struct i2c_adapter *,
void *mux_dev, u32 chan_id),
int (*deselect) (struct i2c_adapter *,
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 195d8b3d9cfb..b66cb601435f 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -232,6 +232,7 @@ struct i2c_client {
#define to_i2c_client(d) container_of(d, struct i2c_client, dev)
extern struct i2c_client *i2c_verify_client(struct device *dev);
+extern struct i2c_adapter *i2c_verify_adapter(struct device *dev);
static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
{
diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h
index 0efe8d465f55..1cb775f8e663 100644
--- a/include/linux/of_i2c.h
+++ b/include/linux/of_i2c.h
@@ -20,6 +20,10 @@ extern void of_i2c_register_devices(struct i2c_adapter *adap);
/* must call put_device() when done with returned i2c_client device */
extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
+/* must call put_device() when done with returned i2c_adapter device */
+extern struct i2c_adapter *of_find_i2c_adapter_by_node(
+ struct device_node *node);
+
#else
static inline void of_i2c_register_devices(struct i2c_adapter *adap)
{