summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTony Lindgren <tony@atomide.com>2013-05-30 12:53:05 -0700
committerTony Lindgren <tony@atomide.com>2013-05-30 13:09:31 -0700
commitb42b918194c4791510ac049e3d507169a7de8544 (patch)
tree19573b8308a1c3b6b9e965c7eb94b70160f5f207
parent76787b3bd2550613ab688842b231e8f82c451cee (diff)
ARM: OMAP2+: Remove board-omap4panda.c
We can now boot with device tree. If you don't want to update u-boot, you can boot with appended DTB with the following instructions: 1. Make sure you have the appended DTB support in .config CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y 2. Build the zImage $ ARCH=arm CROSS_COMPILE=... make zImage 3. Build the device tree blobs $ ARCH=arm CROSS_COMPILE=... make dtbs 4. Append the correct panda dtb to zImage Depending on your hardware it's omap4-panda.dtb, omap4-panda-a4.dtb or omap4-panda-es.dtb. $ cat arch/arm/boot/zImage arch/arm/boot/dts/omap4-panda-es.dtb > /tmp/appended 5. Use mkimage to produce the appended device tree uImage $ mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 \ -n "Linux" -d /tmp/appended /tmp/uImage Signed-off-by: Tony Lindgren <tony@atomide.com
-rw-r--r--arch/arm/mach-omap2/Kconfig8
-rw-r--r--arch/arm/mach-omap2/Makefile1
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c455
3 files changed, 0 insertions, 464 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 465edd10e0aa..1f941c48b3b8 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -378,14 +378,6 @@ config MACH_TI8148EVM
depends on SOC_TI81XX
default y
-config MACH_OMAP4_PANDA
- bool "OMAP4 Panda Board"
- default y
- depends on ARCH_OMAP4
- select OMAP_PACKAGE_CBL
- select OMAP_PACKAGE_CBS
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
config OMAP3_EMU
bool "OMAP3 debugging peripherals"
depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 875d61d71730..2cbf3ef1526b 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -251,7 +251,6 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o
-obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
deleted file mode 100644
index 1e2c75eee912..000000000000
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * Board support file for OMAP4430 based PandaBoard.
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * Author: David Anders <x0132446@ti.com>
- *
- * Based on mach-omap2/board-4430sdp.c
- *
- * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Based on mach-omap2/board-3430sdp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/usb/otg.h>
-#include <linux/i2c/twl.h>
-#include <linux/mfd/twl6040.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/ti_wilink_st.h>
-#include <linux/usb/musb.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/nop-usb-xceiv.h>
-#include <linux/wl12xx.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/omap-abe-twl6040.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "soc.h"
-#include "mmc.h"
-#include "hsmmc.h"
-#include "control.h"
-#include "mux.h"
-#include "common-board-devices.h"
-#include "dss-common.h"
-
-#define GPIO_HUB_POWER 1
-#define GPIO_HUB_NRESET 62
-#define GPIO_WIFI_PMENA 43
-#define GPIO_WIFI_IRQ 53
-
-/* wl127x BT, FM, GPS connectivity chip */
-static struct ti_st_plat_data wilink_platform_data = {
- .nshutdown_gpio = 46,
- .dev_name = "/dev/ttyO1",
- .flow_cntrl = 1,
- .baud_rate = 3000000,
- .chip_enable = NULL,
- .suspend = NULL,
- .resume = NULL,
-};
-
-static struct platform_device wl1271_device = {
- .name = "kim",
- .id = -1,
- .dev = {
- .platform_data = &wilink_platform_data,
- },
-};
-
-static struct gpio_led gpio_leds[] = {
- {
- .name = "pandaboard::status1",
- .default_trigger = "heartbeat",
- .gpio = 7,
- },
- {
- .name = "pandaboard::status2",
- .default_trigger = "mmc0",
- .gpio = 8,
- },
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_led_info,
- },
-};
-
-static struct omap_abe_twl6040_data panda_abe_audio_data = {
- /* Audio out */
- .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
- /* HandsFree through expansion connector */
- .has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
- /* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */
- .has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
- /* PandaBoard: FM RX, PandaBoardES: audio in */
- .has_afm = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
- /* No jack detection. */
- .jack_detection = 0,
- /* MCLK input is 38.4MHz */
- .mclk_freq = 38400000,
-
-};
-
-static struct platform_device panda_abe_audio = {
- .name = "omap-abe-twl6040",
- .id = -1,
- .dev = {
- .platform_data = &panda_abe_audio_data,
- },
-};
-
-static struct platform_device panda_hdmi_audio_codec = {
- .name = "hdmi-audio-codec",
- .id = -1,
-};
-
-static struct platform_device btwilink_device = {
- .name = "btwilink",
- .id = -1,
-};
-
-/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */
-static struct nop_usb_xceiv_platform_data hsusb1_phy_data = {
- /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
- .clk_rate = 19200000,
-};
-
-static struct usbhs_phy_data phy_data[] __initdata = {
- {
- .port = 1,
- .reset_gpio = GPIO_HUB_NRESET,
- .vcc_gpio = GPIO_HUB_POWER,
- .vcc_polarity = 1,
- .platform_data = &hsusb1_phy_data,
- },
-};
-
-static struct platform_device *panda_devices[] __initdata = {
- &leds_gpio,
- &wl1271_device,
- &panda_abe_audio,
- &panda_hdmi_audio_codec,
- &btwilink_device,
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static void __init omap4_ehci_init(void)
-{
- int ret;
-
- /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
- ret = clk_add_alias("main_clk", "nop_usb_xceiv.1", "auxclk3_ck", NULL);
- if (ret)
- pr_err("Failed to add main_clk alias to auxclk3_ck\n");
-
- usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
- usbhs_init(&usbhs_bdata);
-}
-
-static struct omap_musb_board_data musb_board_data = {
- .interface_type = MUSB_INTERFACE_UTMI,
- .mode = MUSB_OTG,
- .power = 100,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- .gpio_wp = -EINVAL,
- .gpio_cd = -EINVAL,
- },
- {
- .name = "wl1271",
- .mmc = 5,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
- .gpio_wp = -EINVAL,
- .gpio_cd = -EINVAL,
- .ocr_mask = MMC_VDD_165_195,
- .nonremovable = true,
- },
- {} /* Terminator */
-};
-
-static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
-};
-
-static struct regulator_init_data panda_vmmc5 = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply),
- .consumer_supplies = omap4_panda_vmmc5_supply,
-};
-
-static struct fixed_voltage_config panda_vwlan = {
- .supply_name = "vwl1271",
- .microvolts = 1800000, /* 1.8V */
- .gpio = GPIO_WIFI_PMENA,
- .startup_delay = 70000, /* 70msec */
- .enable_high = 1,
- .enabled_at_boot = 0,
- .init_data = &panda_vmmc5,
-};
-
-static struct platform_device omap_vwlan_device = {
- .name = "reg-fixed-voltage",
- .id = 1,
- .dev = {
- .platform_data = &panda_vwlan,
- },
-};
-
-static struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
- .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
-};
-
-static struct twl6040_codec_data twl6040_codec = {
- /* single-step ramp for headset and handsfree */
- .hs_left_step = 0x0f,
- .hs_right_step = 0x0f,
- .hf_left_step = 0x1d,
- .hf_right_step = 0x1d,
-};
-
-static struct twl6040_platform_data twl6040_data = {
- .codec = &twl6040_codec,
- .audpwron_gpio = 127,
-};
-
-static struct i2c_board_info __initdata panda_i2c_1_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl6040", 0x4b),
- .irq = 119 + OMAP44XX_IRQ_GIC_START,
- .platform_data = &twl6040_data,
- },
-};
-
-/* Panda board uses the common PMIC configuration */
-static struct twl4030_platform_data omap4_panda_twldata;
-
-/*
- * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
- * is connected as I2C slave device, and can be accessed at address 0x50
- */
-static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
- {
- I2C_BOARD_INFO("eeprom", 0x50),
- },
-};
-
-static int __init omap4_panda_i2c_init(void)
-{
- omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
- TWL_COMMON_REGULATOR_VDAC |
- TWL_COMMON_REGULATOR_VAUX2 |
- TWL_COMMON_REGULATOR_VAUX3 |
- TWL_COMMON_REGULATOR_VMMC |
- TWL_COMMON_REGULATOR_VPP |
- TWL_COMMON_REGULATOR_VANA |
- TWL_COMMON_REGULATOR_VCXIO |
- TWL_COMMON_REGULATOR_VUSB |
- TWL_COMMON_REGULATOR_CLK32KG |
- TWL_COMMON_REGULATOR_V1V8 |
- TWL_COMMON_REGULATOR_V2V1);
- omap4_pmic_init("twl6030", &omap4_panda_twldata, panda_i2c_1_boardinfo,
- ARRAY_SIZE(panda_i2c_1_boardinfo));
- omap_register_i2c_bus(2, 400, NULL, 0);
- /*
- * Bus 3 is attached to the DVI port where devices like the pico DLP
- * projector don't work reliably with 400kHz
- */
- omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
- ARRAY_SIZE(panda_i2c_eeprom));
- omap_register_i2c_bus(4, 400, NULL, 0);
- return 0;
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- /* WLAN IRQ - GPIO 53 */
- OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
- /* WLAN POWER ENABLE - GPIO 43 */
- OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
- /* WLAN SDIO: MMC5 CMD */
- OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- /* WLAN SDIO: MMC5 CLK */
- OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- /* WLAN SDIO: MMC5 DAT[0-3] */
- OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- /* gpio 0 - TFP410 PD */
- OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
- /* dispc2_data23 */
- OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data22 */
- OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data21 */
- OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data20 */
- OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data19 */
- OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data18 */
- OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data15 */
- OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data14 */
- OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data13 */
- OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data12 */
- OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data11 */
- OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data10 */
- OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data9 */
- OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data16 */
- OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data17 */
- OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_hsync */
- OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_pclk */
- OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_vsync */
- OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_de */
- OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data8 */
- OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data7 */
- OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data6 */
- OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data5 */
- OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data4 */
- OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data3 */
- OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data2 */
- OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data1 */
- OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data0 */
- OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* NIRQ2 for twl6040 */
- OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
- OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
- /* GPIO_127 for twl6040 */
- OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
- /* McPDM */
- OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
- OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
- OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
- OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
- /* McBSP1 */
- OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
- OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
- OMAP_PULL_ENA),
- OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- /* UART2 - BT/FM/GPS shared transport */
- OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
- OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
- OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
- OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
-
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-#else
-#define board_mux NULL
-#endif
-
-
-static void omap4_panda_init_rev(void)
-{
- if (cpu_is_omap443x()) {
- /* PandaBoard 4430 */
- /* ASoC audio configuration */
- panda_abe_audio_data.card_name = "PandaBoard";
- panda_abe_audio_data.has_hsmic = 1;
- } else {
- /* PandaBoard ES */
- /* ASoC audio configuration */
- panda_abe_audio_data.card_name = "PandaBoardES";
- }
-}
-
-static void __init omap4_panda_init(void)
-{
- int package = OMAP_PACKAGE_CBS;
- int ret;
-
- if (omap_rev() == OMAP4430_REV_ES1_0)
- package = OMAP_PACKAGE_CBL;
- omap4_mux_init(board_mux, NULL, package);
-
- omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
- ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
- if (ret)
- pr_err("error setting wl12xx data: %d\n", ret);
-
- omap4_panda_init_rev();
- omap4_panda_i2c_init();
- platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
- platform_device_register(&omap_vwlan_device);
- omap_serial_init();
- omap_sdrc_init(NULL, NULL);
- omap4_twl6030_hsmmc_init(mmc);
- omap4_ehci_init();
- usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
- usb_musb_init(&musb_board_data);
- omap4_panda_display_init();
-}
-
-MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
- /* Maintainer: David Anders - Texas Instruments Inc */
- .atag_offset = 0x100,
- .smp = smp_ops(omap4_smp_ops),
- .reserve = omap_reserve,
- .map_io = omap4_map_io,
- .init_early = omap4430_init_early,
- .init_irq = gic_init_irq,
- .init_machine = omap4_panda_init,
- .init_late = omap4430_init_late,
- .init_time = omap4_local_timer_init,
- .restart = omap44xx_restart,
-MACHINE_END