Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (lm78) Become the maintainer
  hwmon: (lm78) Make ISA interface depend on CONFIG_ISA
  hwmon: (lm78) Avoid forward declarations
  hwmon: (sht15) Correct a comment mistake
  hwmon: (max1111) Avoid extra memory allocations
  hwmon: (it87) Add chassis intrusion detection support
  hwmon: (via-cputemp) Add VID reporting support
  hwmon-vid: Add support for VIA family 6 model D CPU
  hwmon: New driver sch5636
  hwmon: (sch5627) Factor out some code shared with sch5636 driver

16 files changed, 1285 insertions, 468 deletions

diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 38425f0f2645..6f496a586732 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -76,7 +76,8 @@ IT8718F, IT8720F, IT8721F, IT8726F, IT8758E and SiS950 chips.
 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
 joysticks and other miscellaneous stuff. For hardware monitoring, they
 include an 'environment controller' with 3 temperature sensors, 3 fan
-rotation speed sensors, 8 voltage sensors, and associated alarms.
+rotation speed sensors, 8 voltage sensors, associated alarms, and chassis
+intrusion detection.
 
 The IT8712F and IT8716F additionally feature VID inputs, used to report
 the Vcore voltage of the processor. The early IT8712F have 5 VID pins,
diff --git a/Documentation/hwmon/lm78 b/Documentation/hwmon/lm78
index 60932e26abaa..2bdc881a0c12 100644
--- a/Documentation/hwmon/lm78
+++ b/Documentation/hwmon/lm78
@@ -13,7 +13,8 @@ Supported chips:
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/
 
-Author: Frodo Looijaard <frodol@dds.nl>
+Authors: Frodo Looijaard <frodol@dds.nl>
+         Jean Delvare <khali@linux-fr.org>
 
 Description
 -----------
diff --git a/Documentation/hwmon/sch5636 b/Documentation/hwmon/sch5636
new file mode 100644
index 000000000000..f83bd1c260f0
--- /dev/null
+++ b/Documentation/hwmon/sch5636
@@ -0,0 +1,31 @@
+Kernel driver sch5636
+=====================
+
+Supported chips:
+  * SMSC SCH5636
+    Prefix: 'sch5636'
+    Addresses scanned: none, address read from Super I/O config space
+
+Author: Hans de Goede <hdegoede@redhat.com>
+
+
+Description
+-----------
+
+SMSC SCH5636 Super I/O chips include an embedded microcontroller for
+hardware monitoring solutions, allowing motherboard manufacturers to create
+their own custom hwmon solution based upon the SCH5636.
+
+Currently the sch5636 driver only supports the Fujitsu Theseus SCH5636 based
+hwmon solution. The sch5636 driver runs a sanity check on loading to ensure
+it is dealing with a Fujitsu Theseus and not with another custom SCH5636 based
+hwmon solution.
+
+The Fujitsu Theseus can monitor up to 5 voltages, 8 fans and 16
+temperatures. Note that the driver detects how many fan headers /
+temperature sensors are actually implemented on the motherboard, so you will
+likely see fewer temperature and fan inputs.
+
+An application note describing the Theseus' registers, as well as an
+application note describing the protocol for communicating with the
+microcontroller is available upon request. Please mail me if you want a copy.
diff --git a/MAINTAINERS b/MAINTAINERS
index efe0a4b07159..91e5cc7db8c8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3960,6 +3960,13 @@ L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/lm73.c
 
+LM78 HARDWARE MONITOR DRIVER
+M:	Jean Delvare <khali@linux-fr.org>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/lm78
+F:	drivers/hwmon/lm78.c
+
 LM83 HARDWARE MONITOR DRIVER
 M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 5f888f7e7dcb..0598cd22edf2 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1041,8 +1041,13 @@ config SENSORS_SMSC47B397
 	  This driver can also be built as a module.  If so, the module
 	  will be called smsc47b397.
 
+config SENSORS_SCH56XX_COMMON
+	tristate
+	default n
+
 config SENSORS_SCH5627
 	tristate "SMSC SCH5627"
+	select SENSORS_SCH56XX_COMMON
 	help
 	  If you say yes here you get support for the hardware monitoring
 	  features of the SMSC SCH5627 Super-I/O chip.
@@ -1050,6 +1055,21 @@ config SENSORS_SCH5627
 	  This driver can also be built as a module.  If so, the module
 	  will be called sch5627.
 
+config SENSORS_SCH5636
+	tristate "SMSC SCH5636"
+	select SENSORS_SCH56XX_COMMON
+	help
+	  SMSC SCH5636 Super I/O chips include an embedded microcontroller for
+	  hardware monitoring solutions, allowing motherboard manufacturers to
+	  create their own custom hwmon solution based upon the SCH5636.
+
+	  Currently this driver only supports the Fujitsu Theseus SCH5636 based
+	  hwmon solution. Say yes here if you want support for the Fujitsu
+	  Theseus' hardware monitoring features.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sch5636.
+
 config SENSORS_ADS1015
 	tristate "Texas Instruments ADS1015"
 	depends on I2C
@@ -1142,6 +1162,7 @@ config SENSORS_TWL4030_MADC
 config SENSORS_VIA_CPUTEMP
 	tristate "VIA CPU temperature sensor"
 	depends on X86
+	select HWMON_VID
 	help
 	  If you say yes here you get support for the temperature
 	  sensor inside your CPU. Supported are all known variants of
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 28061cfa0cdb..d7995a1d0784 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -95,7 +95,9 @@ obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_S3C)	+= s3c-hwmon.o
+obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
 obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
+obj-$(CONFIG_SENSORS_SCH5636)	+= sch5636.o
 obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
 obj-$(CONFIG_SENSORS_SHT21)	+= sht21.o
 obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index c8195a077da3..932da8a5aaf4 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -140,7 +140,11 @@ int vid_from_reg(int val, u8 vrm)
 		return(val & 0x10 ? 975 - (val & 0xF) * 25 :
 				    1750 - val * 50);
 	case 13:
+	case 131:
 		val &= 0x3f;
+		/* Exception for Eden ULV 500 MHz */
+		if (vrm == 131 && val == 0x3f)
+			val++;
 		return(1708 - val * 16);
 	case 14:		/* Intel Core */
 				/* compute in uV, round to mV */
@@ -205,11 +209,45 @@ static struct vrm_model vrm_models[] = {
 	{X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85},	/* Nehemiah */
 	{X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17},	/* C3-M, Eden-N */
 	{X86_VENDOR_CENTAUR, 0x6, 0xA, 0x7, 0},		/* No information */
-	{X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13},	/* C7, Esther */
+	{X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13},	/* C7-M, C7, Eden (Esther) */
+	{X86_VENDOR_CENTAUR, 0x6, 0xD, ANY, 134},	/* C7-D, C7-M, C7, Eden (Esther) */
 
 	{X86_VENDOR_UNKNOWN, ANY, ANY, ANY, 0}		/* stop here */
 };
 
+/*
+ * Special case for VIA model D: there are two different possible
+ * VID tables, so we have to figure out first, which one must be
+ * used. This resolves temporary drm value 134 to 14 (Intel Core
+ * 7-bit VID), 13 (Pentium M 6-bit VID) or 131 (Pentium M 6-bit VID
+ * + quirk for Eden ULV 500 MHz).
+ * Note: something similar might be needed for model A, I'm not sure.
+ */
+static u8 get_via_model_d_vrm(void)
+{
+	unsigned int vid, brand, dummy;
+	static const char *brands[4] = {
+		"C7-M", "C7", "Eden", "C7-D"
+	};
+
+	rdmsr(0x198, dummy, vid);
+	vid &= 0xff;
+
+	rdmsr(0x1154, brand, dummy);
+	brand = ((brand >> 4) ^ (brand >> 2)) & 0x03;
+
+	if (vid > 0x3f) {
+		pr_info("Using %d-bit VID table for VIA %s CPU\n",
+			7, brands[brand]);
+		return 14;
+	} else {
+		pr_info("Using %d-bit VID table for VIA %s CPU\n",
+			6, brands[brand]);
+		/* Enable quirk for Eden */
+		return brand == 2 ? 131 : 13;
+	}
+}
+
 static u8 find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor)
 {
 	int i = 0;
@@ -247,6 +285,8 @@ u8 vid_which_vrm(void)
 		eff_model += ((eax & 0x000F0000)>>16)<<4;
 	}
 	vrm_ret = find_vrm(eff_family, eff_model, eff_stepping, c->x86_vendor);
+	if (vrm_ret == 134)
+		vrm_ret = get_via_model_d_vrm();
 	if (vrm_ret == 0)
 		pr_info("Unknown VRM version of your x86 CPU\n");
 	return vrm_ret;
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 5f5247750430..d912649fac50 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -1172,6 +1172,32 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
 	struct it87_data *data = it87_update_device(dev);
 	return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 }
+
+static ssize_t clear_intrusion(struct device *dev, struct device_attribute
+		*attr, const char *buf, size_t count)
+{
+	struct it87_data *data = dev_get_drvdata(dev);
+	long val;
+	int config;
+
+	if (strict_strtol(buf, 10, &val) < 0 || val != 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	config = it87_read_value(data, IT87_REG_CONFIG);
+	if (config < 0) {
+		count = config;
+	} else {
+		config |= 1 << 5;
+		it87_write_value(data, IT87_REG_CONFIG, config);
+		/* Invalidate cache to force re-read */
+		data->valid = 0;
+	}
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 8);
 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 9);
 static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 10);
@@ -1188,6 +1214,8 @@ static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 6);
 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
+static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
+			  show_alarm, clear_intrusion, 4);
 
 static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -1350,6 +1378,7 @@ static struct attribute *it87_attributes[] = {
 	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
 
 	&dev_attr_alarms.attr,
+	&sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
 	&dev_attr_name.attr,
 	NULL
 };
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index 4cb24eafe318..6df0b4681710 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -2,7 +2,7 @@
     lm78.c - Part of lm_sensors, Linux kernel modules for hardware
              monitoring
     Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> 
-    Copyright (c) 2007        Jean Delvare <khali@linux-fr.org>
+    Copyright (c) 2007, 2011  Jean Delvare <khali@linux-fr.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -26,23 +26,21 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-vid.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
-#include <linux/io.h>
 
-/* ISA device, if found */
-static struct platform_device *pdev;
+#ifdef CONFIG_ISA
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#endif
 
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
 						0x2e, 0x2f, I2C_CLIENT_END };
-static unsigned short isa_address = 0x290;
-
 enum chips { lm78, lm79 };
 
 /* Many LM78 constants specified below */
@@ -143,50 +141,12 @@ struct lm78_data {
 };
 
 
-static int lm78_i2c_detect(struct i2c_client *client,
-			   struct i2c_board_info *info);
-static int lm78_i2c_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id);
-static int lm78_i2c_remove(struct i2c_client *client);
-
-static int __devinit lm78_isa_probe(struct platform_device *pdev);
-static int __devexit lm78_isa_remove(struct platform_device *pdev);
-
 static int lm78_read_value(struct lm78_data *data, u8 reg);
 static int lm78_write_value(struct lm78_data *data, u8 reg, u8 value);
 static struct lm78_data *lm78_update_device(struct device *dev);
 static void lm78_init_device(struct lm78_data *data);
 
 
-static const struct i2c_device_id lm78_i2c_id[] = {
-	{ "lm78", lm78 },
-	{ "lm79", lm79 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, lm78_i2c_id);
-
-static struct i2c_driver lm78_driver = {
-	.class		= I2C_CLASS_HWMON,
-	.driver = {
-		.name	= "lm78",
-	},
-	.probe		= lm78_i2c_probe,
-	.remove		= lm78_i2c_remove,
-	.id_table	= lm78_i2c_id,
-	.detect		= lm78_i2c_detect,
-	.address_list	= normal_i2c,
-};
-
-static struct platform_driver lm78_isa_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "lm78",
-	},
-	.probe		= lm78_isa_probe,
-	.remove		= __devexit_p(lm78_isa_remove),
-};
-
-
 /* 7 Voltages */
 static ssize_t show_in(struct device *dev, struct device_attribute *da,
 		       char *buf)
@@ -514,6 +474,16 @@ static const struct attribute_group lm78_group = {
 	.attrs = lm78_attributes,
 };
 
+/*
+ * ISA related code
+ */
+#ifdef CONFIG_ISA
+
+/* ISA device, if found */
+static struct platform_device *pdev;
+
+static unsigned short isa_address = 0x290;
+
 /* I2C devices get this name attribute automatically, but for ISA devices
    we must create it by ourselves. */
 static ssize_t show_name(struct device *dev, struct device_attribute
@@ -525,6 +495,11 @@ static ssize_t show_name(struct device *dev, struct device_attribute
 }
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 
+static struct lm78_data *lm78_data_if_isa(void)
+{
+	return pdev ? platform_get_drvdata(pdev) : NULL;
+}
+
 /* Returns 1 if the I2C chip appears to be an alias of the ISA chip */
 static int lm78_alias_detect(struct i2c_client *client, u8 chipid)
 {
@@ -558,12 +533,24 @@ static int lm78_alias_detect(struct i2c_client *client, u8 chipid)
 
 	return 1;
 }
+#else /* !CONFIG_ISA */
+
+static int lm78_alias_detect(struct i2c_client *client, u8 chipid)
+{
+	return 0;
+}
+
+static struct lm78_data *lm78_data_if_isa(void)
+{
+	return NULL;
+}
+#endif /* CONFIG_ISA */
 
 static int lm78_i2c_detect(struct i2c_client *client,
 			   struct i2c_board_info *info)
 {
 	int i;
-	struct lm78_data *isa = pdev ? platform_get_drvdata(pdev) : NULL;
+	struct lm78_data *isa = lm78_data_if_isa();
 	const char *client_name;
 	struct i2c_adapter *adapter = client->adapter;
 	int address = client->addr;
@@ -663,76 +650,24 @@ static int lm78_i2c_remove(struct i2c_client *client)
 	return 0;
 }
 
-static int __devinit lm78_isa_probe(struct platform_device *pdev)
-{
-	int err;
-	struct lm78_data *data;
-	struct resource *res;
-
-	/* Reserve the ISA region */
-	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	if (!request_region(res->start + LM78_ADDR_REG_OFFSET, 2, "lm78")) {
-		err = -EBUSY;
-		goto exit;
-	}
-
-	if (!(data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit_release_region;
-	}
-	mutex_init(&data->lock);
-	data->isa_addr = res->start;
-	platform_set_drvdata(pdev, data);
-
-	if (lm78_read_value(data, LM78_REG_CHIPID) & 0x80) {
-		data->type = lm79;
-		data->name = "lm79";
-	} else {
-		data->type = lm78;
-		data->name = "lm78";
-	}
-
-	/* Initialize the LM78 chip */
-	lm78_init_device(data);
-
-	/* Register sysfs hooks */
-	if ((err = sysfs_create_group(&pdev->dev.kobj, &lm78_group))
-	 || (err = device_create_file(&pdev->dev, &dev_attr_name)))
-		goto exit_remove_files;
-
-	data->hwmon_dev = hwmon_device_register(&pdev->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove_files;
-	}
-
-	return 0;
-
- exit_remove_files:
-	sysfs_remove_group(&pdev->dev.kobj, &lm78_group);
-	device_remove_file(&pdev->dev, &dev_attr_name);
-	kfree(data);
- exit_release_region:
-	release_region(res->start + LM78_ADDR_REG_OFFSET, 2);
- exit:
-	return err;
-}
-
-static int __devexit lm78_isa_remove(struct platform_device *pdev)
-{
-	struct lm78_data *data = platform_get_drvdata(pdev);
-	struct resource *res;
-
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&pdev->dev.kobj, &lm78_group);
-	device_remove_file(&pdev->dev, &dev_attr_name);
-	kfree(data);
-
-	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	release_region(res->start + LM78_ADDR_REG_OFFSET, 2);
+static const struct i2c_device_id lm78_i2c_id[] = {
+	{ "lm78", lm78 },
+	{ "lm79", lm79 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm78_i2c_id);
 
-	return 0;
-}
+static struct i2c_driver lm78_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "lm78",
+	},
+	.probe		= lm78_i2c_probe,
+	.remove		= lm78_i2c_remove,
+	.id_table	= lm78_i2c_id,
+	.detect		= lm78_i2c_detect,
+	.address_list	= normal_i2c,
+};
 
 /* The SMBus locks itself, but ISA access must be locked explicitly! 
    We don't want to lock the whole ISA bus, so we lock each client
@@ -743,6 +678,7 @@ static int lm78_read_value(struct lm78_data *data, u8 reg)
 {
 	struct i2c_client *client = data->client;
 
+#ifdef CONFIG_ISA
 	if (!client) { /* ISA device */
 		int res;
 		mutex_lock(&data->lock);
@@ -751,6 +687,7 @@ static int lm78_read_value(struct lm78_data *data, u8 reg)
 		mutex_unlock(&data->lock);
 		return res;
 	} else
+#endif
 		return i2c_smbus_read_byte_data(client, reg);
 }
 
@@ -765,6 +702,7 @@ static int lm78_write_value(struct lm78_data *data, u8 reg, u8 value)
 {
 	struct i2c_client *client = data->client;
 
+#ifdef CONFIG_ISA
 	if (!client) { /* ISA device */
 		mutex_lock(&data->lock);
 		outb_p(reg, data->isa_addr + LM78_ADDR_REG_OFFSET);
@@ -772,6 +710,7 @@ static int lm78_write_value(struct lm78_data *data, u8 reg, u8 value)
 		mutex_unlock(&data->lock);
 		return 0;
 	} else
+#endif
 		return i2c_smbus_write_byte_data(client, reg, value);
 }
 
@@ -849,6 +788,88 @@ static struct lm78_data *lm78_update_device(struct device *dev)
 	return data;
 }
 
+#ifdef CONFIG_ISA
+static int __devinit lm78_isa_probe(struct platform_device *pdev)
+{
+	int err;
+	struct lm78_data *data;
+	struct resource *res;
+
+	/* Reserve the ISA region */
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!request_region(res->start + LM78_ADDR_REG_OFFSET, 2, "lm78")) {
+		err = -EBUSY;
+		goto exit;
+	}
+
+	data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit_release_region;
+	}
+	mutex_init(&data->lock);
+	data->isa_addr = res->start;
+	platform_set_drvdata(pdev, data);
+
+	if (lm78_read_value(data, LM78_REG_CHIPID) & 0x80) {
+		data->type = lm79;
+		data->name = "lm79";
+	} else {
+		data->type = lm78;
+		data->name = "lm78";
+	}
+
+	/* Initialize the LM78 chip */
+	lm78_init_device(data);
+
+	/* Register sysfs hooks */
+	if ((err = sysfs_create_group(&pdev->dev.kobj, &lm78_group))
+	 || (err = device_create_file(&pdev->dev, &dev_attr_name)))
+		goto exit_remove_files;
+
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove_files;
+	}
+
+	return 0;
+
+ exit_remove_files:
+	sysfs_remove_group(&pdev->dev.kobj, &lm78_group);
+	device_remove_file(&pdev->dev, &dev_attr_name);
+	kfree(data);
+ exit_release_region:
+	release_region(res->start + LM78_ADDR_REG_OFFSET, 2);
+ exit:
+	return err;
+}
+
+static int __devexit lm78_isa_remove(struct platform_device *pdev)
+{
+	struct lm78_data *data = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&pdev->dev.kobj, &lm78_group);
+	device_remove_file(&pdev->dev, &dev_attr_name);
+	kfree(data);
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	release_region(res->start + LM78_ADDR_REG_OFFSET, 2);
+
+	return 0;
+}
+
+static struct platform_driver lm78_isa_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "lm78",
+	},
+	.probe		= lm78_isa_probe,
+	.remove		= __devexit_p(lm78_isa_remove),
+};
+
 /* return 1 if a supported chip is found, 0 otherwise */
 static int __init lm78_isa_found(unsigned short address)
 {
@@ -969,12 +990,10 @@ static int __init lm78_isa_device_add(unsigned short address)
 	return err;
 }
 
-static int __init sm_lm78_init(void)
+static int __init lm78_isa_register(void)
 {
 	int res;
 
-	/* We register the ISA device first, so that we can skip the
-	 * registration of an I2C interface to the same device. */
 	if (lm78_isa_found(isa_address)) {
 		res = platform_driver_register(&lm78_isa_driver);
 		if (res)
@@ -986,32 +1005,62 @@ static int __init sm_lm78_init(void)
 			goto exit_unreg_isa_driver;
 	}
 
-	res = i2c_add_driver(&lm78_driver);
-	if (res)
-		goto exit_unreg_isa_device;
-
 	return 0;
 
- exit_unreg_isa_device:
-	platform_device_unregister(pdev);
  exit_unreg_isa_driver:
 	platform_driver_unregister(&lm78_isa_driver);
  exit:
 	return res;
 }
 
-static void __exit sm_lm78_exit(void)
+static void lm78_isa_unregister(void)
 {
 	if (pdev) {
 		platform_device_unregister(pdev);
 		platform_driver_unregister(&lm78_isa_driver);
 	}
-	i2c_del_driver(&lm78_driver);
 }
+#else /* !CONFIG_ISA */
 
+static int __init lm78_isa_register(void)
+{
+	return 0;
+}
+
+static void lm78_isa_unregister(void)
+{
+}
+#endif /* CONFIG_ISA */
 
+static int __init sm_lm78_init(void)
+{
+	int res;
+
+	/* We register the ISA device first, so that we can skip the
+	 * registration of an I2C interface to the same device. */
+	res = lm78_isa_register();
+	if (res)
+		goto exit;
+
+	res = i2c_add_driver(&lm78_driver);
+	if (res)
+		goto exit_unreg_isa_device;
+
+	return 0;
+
+ exit_unreg_isa_device:
+	lm78_isa_unregister();
+ exit:
+	return res;
+}
+
+static void __exit sm_lm78_exit(void)
+{
+	lm78_isa_unregister();
+	i2c_del_driver(&lm78_driver);
+}
 
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_AUTHOR("Frodo Looijaard, Jean Delvare <khali@linux-fr.org>");
 MODULE_DESCRIPTION("LM78/LM79 driver");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/max1111.c b/drivers/hwmon/max1111.c
index 14335bbc9bdc..c97b78ef9116 100644
--- a/drivers/hwmon/max1111.c
+++ b/drivers/hwmon/max1111.c
@@ -38,8 +38,8 @@ struct max1111_data {
 	struct device		*hwmon_dev;
 	struct spi_message	msg;
 	struct spi_transfer	xfer[2];
-	uint8_t *tx_buf;
-	uint8_t *rx_buf;
+	uint8_t tx_buf[MAX1111_TX_BUF_SIZE];
+	uint8_t rx_buf[MAX1111_RX_BUF_SIZE];
 	struct mutex		drvdata_lock;
 	/* protect msg, xfer and buffers from multiple access */
 };
@@ -131,33 +131,23 @@ static const struct attribute_group max1111_attr_group = {
 	.attrs	= max1111_attributes,
 };
 
-static int setup_transfer(struct max1111_data *data)
+static int __devinit setup_transfer(struct max1111_data *data)
 {
 	struct spi_message *m;
 	struct spi_transfer *x;
 
-	data->tx_buf = kmalloc(MAX1111_TX_BUF_SIZE, GFP_KERNEL);
-	if (!data->tx_buf)
-		return -ENOMEM;
-
-	data->rx_buf = kmalloc(MAX1111_RX_BUF_SIZE, GFP_KERNEL);
-	if (!data->rx_buf) {
-		kfree(data->tx_buf);
-		return -ENOMEM;
-	}
-
 	m = &data->msg;
 	x = &data->xfer[0];
 
 	spi_message_init(m);
 
 	x->tx_buf = &data->tx_buf[0];
-	x->len = 1;
+	x->len = MAX1111_TX_BUF_SIZE;
 	spi_message_add_tail(x, m);
 
 	x++;
 	x->rx_buf = &data->rx_buf[0];
-	x->len = 2;
+	x->len = MAX1111_RX_BUF_SIZE;
 	spi_message_add_tail(x, m);
 
 	return 0;
@@ -192,7 +182,7 @@ static int __devinit max1111_probe(struct spi_device *spi)
 	err = sysfs_create_group(&spi->dev.kobj, &max1111_attr_group);
 	if (err) {
 		dev_err(&spi->dev, "failed to create attribute group\n");
-		goto err_free_all;
+		goto err_free_data;
 	}
 
 	data->hwmon_dev = hwmon_device_register(&spi->dev);
@@ -209,9 +199,6 @@ static int __devinit max1111_probe(struct spi_device *spi)
 
 err_remove:
 	sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
-err_free_all:
-	kfree(data->rx_buf);
-	kfree(data->tx_buf);
 err_free_data:
 	kfree(data);
 	return err;
@@ -224,8 +211,6 @@ static int __devexit max1111_remove(struct spi_device *spi)
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
 	mutex_destroy(&data->drvdata_lock);
-	kfree(data->rx_buf);
-	kfree(data->tx_buf);
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c
index 3494a4cce414..e3b5c6039c25 100644
--- a/drivers/hwmon/sch5627.c
+++ b/drivers/hwmon/sch5627.c
@@ -28,33 +28,15 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/acpi.h>
-#include <linux/delay.h>
+#include "sch56xx-common.h"
 
 #define DRVNAME "sch5627"
 #define DEVNAME DRVNAME /* We only support one model */
 
-#define SIO_SCH5627_EM_LD	0x0C	/* Embedded Microcontroller LD */
-#define SIO_UNLOCK_KEY		0x55	/* Key to enable Super-I/O */
-#define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
-
-#define SIO_REG_LDSEL		0x07	/* Logical device select */
-#define SIO_REG_DEVID		0x20	/* Device ID */
-#define SIO_REG_ENABLE		0x30	/* Logical device enable */
-#define SIO_REG_ADDR		0x66	/* Logical device address (2 bytes) */
-
-#define SIO_SCH5627_ID		0xC6	/* Chipset ID */
-
-#define REGION_LENGTH		9
-
 #define SCH5627_HWMON_ID		0xa5
 #define SCH5627_COMPANY_ID		0x5c
 #define SCH5627_PRIMARY_ID		0xa0
 
-#define SCH5627_CMD_READ		0x02
-#define SCH5627_CMD_WRITE		0x03
-
 #define SCH5627_REG_BUILD_CODE		0x39
 #define SCH5627_REG_BUILD_ID		0x3a
 #define SCH5627_REG_HWMON_ID		0x3c
@@ -111,182 +93,6 @@ struct sch5627_data {
 	u16 in[SCH5627_NO_IN];
 };
 
-static struct platform_device *sch5627_pdev;
-
-/* Super I/O functions */
-static inline int superio_inb(int base, int reg)
-{
-	outb(reg, base);
-	return inb(base + 1);
-}
-
-static inline int superio_enter(int base)
-{
-	/* Don't step on other drivers' I/O space by accident */
-	if (!request_muxed_region(base, 2, DRVNAME)) {
-		pr_err("I/O address 0x%04x already in use\n", base);
-		return -EBUSY;
-	}
-
-	outb(SIO_UNLOCK_KEY, base);
-
-	return 0;
-}
-
-static inline void superio_select(int base, int ld)
-{
-	outb(SIO_REG_LDSEL, base);
-	outb(ld, base + 1);
-}
-
-static inline void superio_exit(int base)
-{
-	outb(SIO_LOCK_KEY, base);
-	release_region(base, 2);
-}
-
-static int sch5627_send_cmd(struct sch5627_data *data, u8 cmd, u16 reg, u8 v)
-{
-	u8 val;
-	int i;
-	/*
-	 * According to SMSC for the commands we use the maximum time for
-	 * the EM to respond is 15 ms, but testing shows in practice it
-	 * responds within 15-32 reads, so we first busy poll, and if
-	 * that fails sleep a bit and try again until we are way past
-	 * the 15 ms maximum response time.
-	 */
-	const int max_busy_polls = 64;
-	const int max_lazy_polls = 32;
-
-	/* (Optional) Write-Clear the EC to Host Mailbox Register */
-	val = inb(data->addr + 1);
-	outb(val, data->addr + 1);
-
-	/* Set Mailbox Address Pointer to first location in Region 1 */
-	outb(0x00, data->addr + 2);
-	outb(0x80, data->addr + 3);
-
-	/* Write Request Packet Header */
-	outb(cmd, data->addr + 4); /* VREG Access Type read:0x02 write:0x03 */
-	outb(0x01, data->addr + 5); /* # of Entries: 1 Byte (8-bit) */
-	outb(0x04, data->addr + 2); /* Mailbox AP to first data entry loc. */
-
-	/* Write Value field */
-	if (cmd == SCH5627_CMD_WRITE)
-		outb(v, data->addr + 4);
-
-	/* Write Address field */
-	outb(reg & 0xff, data->addr + 6);
-	outb(reg >> 8, data->addr + 7);
-
-	/* Execute the Random Access Command */
-	outb(0x01, data->addr); /* Write 01h to the Host-to-EC register */
-
-	/* EM Interface Polling "Algorithm" */
-	for (i = 0; i < max_busy_polls + max_lazy_polls; i++) {
-		if (i >= max_busy_polls)
-			msleep(1);
-		/* Read Interrupt source Register */
-		val = inb(data->addr + 8);
-		/* Write Clear the interrupt source bits */
-		if (val)
-			outb(val, data->addr + 8);
-		/* Command Completed ? */
-		if (val & 0x01)
-			break;
-	}
-	if (i == max_busy_polls + max_lazy_polls) {
-		pr_err("Max retries exceeded reading virtual "
-		       "register 0x%04hx (%d)\n", reg, 1);
-		return -EIO;
-	}
-
-	/*
-	 * According to SMSC we may need to retry this, but sofar I've always
-	 * seen this succeed in 1 try.
-	 */
-	for (i = 0; i < max_busy_polls; i++) {
-		/* Read EC-to-Host Register */
-		val = inb(data->addr + 1);
-		/* Command Completed ? */
-		if (val == 0x01)
-			break;
-
-		if (i == 0)
-			pr_warn("EC reports: 0x%02x reading virtual register "
-				"0x%04hx\n", (unsigned int)val, reg);
-	}
-	if (i == max_busy_polls) {
-		pr_err("Max retries exceeded reading virtual "
-		       "register 0x%04hx (%d)\n", reg, 2);
-		return -EIO;
-	}
-
-	/*
-	 * According to the SMSC app note we should now do:
-	 *
-	 * Set Mailbox Address Pointer to first location in Region 1 *
-	 * outb(0x00, data->addr + 2);
-	 * outb(0x80, data->addr + 3);
-	 *
-	 * But if we do that things don't work, so let's not.
-	 */
-
-	/* Read Value field */
-	if (cmd == SCH5627_CMD_READ)
-		return inb(data->addr + 4);
-
-	return 0;
-}
-
-static int sch5627_read_virtual_reg(struct sch5627_data *data, u16 reg)
-{
-	return sch5627_send_cmd(data, SCH5627_CMD_READ, reg, 0);
-}
-
-static int sch5627_write_virtual_reg(struct sch5627_data *data,
-				     u16 reg, u8 val)
-{
-	return sch5627_send_cmd(data, SCH5627_CMD_WRITE, reg, val);
-}
-
-static int sch5627_read_virtual_reg16(struct sch5627_data *data, u16 reg)
-{
-	int lsb, msb;
-
-	/* Read LSB first, this will cause the matching MSB to be latched */
-	lsb = sch5627_read_virtual_reg(data, reg);
-	if (lsb < 0)
-		return lsb;
-
-	msb = sch5627_read_virtual_reg(data, reg + 1);
-	if (msb < 0)
-		return msb;
-
-	return lsb | (msb << 8);
-}
-
-static int sch5627_read_virtual_reg12(struct sch5627_data *data, u16 msb_reg,
-				      u16 lsn_reg, int high_nibble)
-{
-	int msb, lsn;
-
-	/* Read MSB first, this will cause the matching LSN to be latched */
-	msb = sch5627_read_virtual_reg(data, msb_reg);
-	if (msb < 0)
-		return msb;
-
-	lsn = sch5627_read_virtual_reg(data, lsn_reg);
-	if (lsn < 0)
-		return lsn;
-
-	if (high_nibble)
-		return (msb << 4) | (lsn >> 4);
-	else
-		return (msb << 4) | (lsn & 0x0f);
-}
-
 static struct sch5627_data *sch5627_update_device(struct device *dev)
 {
 	struct sch5627_data *data = dev_get_drvdata(dev);
@@ -297,7 +103,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev)
 
 	/* Trigger a Vbat voltage measurement every 5 minutes */
 	if (time_after(jiffies, data->last_battery + 300 * HZ)) {
-		sch5627_write_virtual_reg(data, SCH5627_REG_CTRL,
+		sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL,
 					  data->control | 0x10);
 		data->last_battery = jiffies;
 	}
@@ -305,7 +111,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev)
 	/* Cache the values for 1 second */
 	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 		for (i = 0; i < SCH5627_NO_TEMPS; i++) {
-			val = sch5627_read_virtual_reg12(data,
+			val = sch56xx_read_virtual_reg12(data->addr,
 				SCH5627_REG_TEMP_MSB[i],
 				SCH5627_REG_TEMP_LSN[i],
 				SCH5627_REG_TEMP_HIGH_NIBBLE[i]);
@@ -317,7 +123,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev)
 		}
 
 		for (i = 0; i < SCH5627_NO_FANS; i++) {
-			val = sch5627_read_virtual_reg16(data,
+			val = sch56xx_read_virtual_reg16(data->addr,
 							 SCH5627_REG_FAN[i]);
 			if (unlikely(val < 0)) {
 				ret = ERR_PTR(val);
@@ -327,7 +133,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev)
 		}
 
 		for (i = 0; i < SCH5627_NO_IN; i++) {
-			val = sch5627_read_virtual_reg12(data,
+			val = sch56xx_read_virtual_reg12(data->addr,
 				SCH5627_REG_IN_MSB[i],
 				SCH5627_REG_IN_LSN[i],
 				SCH5627_REG_IN_HIGH_NIBBLE[i]);
@@ -355,18 +161,21 @@ static int __devinit sch5627_read_limits(struct sch5627_data *data)
 		 * Note what SMSC calls ABS, is what lm_sensors calls max
 		 * (aka high), and HIGH is what lm_sensors calls crit.
 		 */
-		val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_ABS[i]);
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5627_REG_TEMP_ABS[i]);
 		if (val < 0)
 			return val;
 		data->temp_max[i] = val;
 
-		val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_HIGH[i]);
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5627_REG_TEMP_HIGH[i]);
 		if (val < 0)
 			return val;
 		data->temp_crit[i] = val;
 	}
 	for (i = 0; i < SCH5627_NO_FANS; i++) {
-		val = sch5627_read_virtual_reg16(data, SCH5627_REG_FAN_MIN[i]);
+		val = sch56xx_read_virtual_reg16(data->addr,
+						 SCH5627_REG_FAN_MIN[i]);
 		if (val < 0)
 			return val;
 		data->fan_min[i] = val;
@@ -667,7 +476,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
 	mutex_init(&data->update_lock);
 	platform_set_drvdata(pdev, data);
 
-	val = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_ID);
+	val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_ID);
 	if (val < 0) {
 		err = val;
 		goto error;
@@ -679,7 +488,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	val = sch5627_read_virtual_reg(data, SCH5627_REG_COMPANY_ID);
+	val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_COMPANY_ID);
 	if (val < 0) {
 		err = val;
 		goto error;
@@ -691,7 +500,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	val = sch5627_read_virtual_reg(data, SCH5627_REG_PRIMARY_ID);
+	val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_PRIMARY_ID);
 	if (val < 0) {
 		err = val;
 		goto error;
@@ -703,25 +512,28 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	build_code = sch5627_read_virtual_reg(data, SCH5627_REG_BUILD_CODE);
+	build_code = sch56xx_read_virtual_reg(data->addr,
+					      SCH5627_REG_BUILD_CODE);
 	if (build_code < 0) {
 		err = build_code;
 		goto error;
 	}
 
-	build_id = sch5627_read_virtual_reg16(data, SCH5627_REG_BUILD_ID);
+	build_id = sch56xx_read_virtual_reg16(data->addr,
+					      SCH5627_REG_BUILD_ID);
 	if (build_id < 0) {
 		err = build_id;
 		goto error;
 	}
 
-	hwmon_rev = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_REV);
+	hwmon_rev = sch56xx_read_virtual_reg(data->addr,
+					     SCH5627_REG_HWMON_REV);
 	if (hwmon_rev < 0) {
 		err = hwmon_rev;
 		goto error;
 	}
 
-	val = sch5627_read_virtual_reg(data, SCH5627_REG_CTRL);
+	val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_CTRL);
 	if (val < 0) {
 		err = val;
 		goto error;
@@ -734,7 +546,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
 	}
 	/* Trigger a Vbat voltage measurement, so that we get a valid reading
 	   the first time we read Vbat */
-	sch5627_write_virtual_reg(data, SCH5627_REG_CTRL,
+	sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL,
 				  data->control | 0x10);
 	data->last_battery = jiffies;
 
@@ -746,6 +558,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev)
 	if (err)
 		goto error;
 
+	pr_info("found %s chip at %#hx\n", DEVNAME, data->addr);
 	pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n",
 		build_code, build_id, hwmon_rev);
 
@@ -768,85 +581,6 @@ error:
 	return err;
 }
 
-static int __init sch5627_find(int sioaddr, unsigned short *address)
-{
-	u8 devid;
-	int err = superio_enter(sioaddr);
-	if (err)
-		return err;
-
-	devid = superio_inb(sioaddr, SIO_REG_DEVID);
-	if (devid != SIO_SCH5627_ID) {
-		pr_debug("Unsupported device id: 0x%02x\n",
-			 (unsigned int)devid);
-		err = -ENODEV;
-		goto exit;
-	}
-
-	superio_select(sioaddr, SIO_SCH5627_EM_LD);
-
-	if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
-		pr_warn("Device not activated\n");
-		err = -ENODEV;
-		goto exit;
-	}
-
-	/*
-	 * Warning the order of the low / high byte is the other way around
-	 * as on most other superio devices!!
-	 */
-	*address = superio_inb(sioaddr, SIO_REG_ADDR) |
-		   superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8;
-	if (*address == 0) {
-		pr_warn("Base address not set\n");
-		err = -ENODEV;
-		goto exit;
-	}
-
-	pr_info("Found %s chip at %#hx\n", DEVNAME, *address);
-exit:
-	superio_exit(sioaddr);
-	return err;
-}
-
-static int __init sch5627_device_add(unsigned short address)
-{
-	struct resource res = {
-		.start	= address,
-		.end	= address + REGION_LENGTH - 1,
-		.flags	= IORESOURCE_IO,
-	};
-	int err;
-
-	sch5627_pdev = platform_device_alloc(DRVNAME, address);
-	if (!sch5627_pdev)
-		return -ENOMEM;
-
-	res.name = sch5627_pdev->name;
-	err = acpi_check_resource_conflict(&res);
-	if (err)
-		goto exit_device_put;
-
-	err = platform_device_add_resources(sch5627_pdev, &res, 1);
-	if (err) {
-		pr_err("Device resource addition failed\n");
-		goto exit_device_put;
-	}
-
-	err = platform_device_add(sch5627_pdev);
-	if (err) {
-		pr_err("Device addition failed\n");
-		goto exit_device_put;
-	}
-
-	return 0;
-
-exit_device_put:
-	platform_device_put(sch5627_pdev);
-
-	return err;
-}
-
 static struct platform_driver sch5627_driver = {
 	.driver = {
 		.owner	= THIS_MODULE,
@@ -858,31 +592,11 @@ static struct platform_driver sch5627_driver = {
 
 static int __init sch5627_init(void)
 {
-	int err = -ENODEV;
-	unsigned short address;
-
-	if (sch5627_find(0x4e, &address) && sch5627_find(0x2e, &address))
-		goto exit;
-
-	err = platform_driver_register(&sch5627_driver);
-	if (err)
-		goto exit;
-
-	err = sch5627_device_add(address);
-	if (err)
-		goto exit_driver;
-
-	return 0;
-
-exit_driver:
-	platform_driver_unregister(&sch5627_driver);
-exit:
-	return err;
+	return platform_driver_register(&sch5627_driver);
 }
 
 static void __exit sch5627_exit(void)
 {
-	platform_device_unregister(sch5627_pdev);
 	platform_driver_unregister(&sch5627_driver);
 }
 
diff --git a/drivers/hwmon/sch5636.c b/drivers/hwmon/sch5636.c
new file mode 100644
index 000000000000..244407aa79fc
--- /dev/null
+++ b/drivers/hwmon/sch5636.c
@@ -0,0 +1,539 @@
+/***************************************************************************
+ *   Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com>                *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program; if not, write to the                         *
+ *   Free Software Foundation, Inc.,                                       *
+ *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ ***************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include "sch56xx-common.h"
+
+#define DRVNAME "sch5636"
+#define DEVNAME "theseus" /* We only support one model for now */
+
+#define SCH5636_REG_FUJITSU_ID		0x780
+#define SCH5636_REG_FUJITSU_REV		0x783
+
+#define SCH5636_NO_INS			5
+#define SCH5636_NO_TEMPS		16
+#define SCH5636_NO_FANS			8
+
+static const u16 SCH5636_REG_IN_VAL[SCH5636_NO_INS] = {
+	0x22, 0x23, 0x24, 0x25, 0x189 };
+static const u16 SCH5636_REG_IN_FACTORS[SCH5636_NO_INS] = {
+	4400, 1500, 4000, 4400, 16000 };
+static const char * const SCH5636_IN_LABELS[SCH5636_NO_INS] = {
+	"3.3V", "VREF", "VBAT", "3.3AUX", "12V" };
+
+static const u16 SCH5636_REG_TEMP_VAL[SCH5636_NO_TEMPS] = {
+	0x2B, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x180, 0x181,
+	0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C };
+#define SCH5636_REG_TEMP_CTRL(i)	(0x790 + (i))
+#define SCH5636_TEMP_WORKING		0x01
+#define SCH5636_TEMP_ALARM		0x02
+#define SCH5636_TEMP_DEACTIVATED	0x80
+
+static const u16 SCH5636_REG_FAN_VAL[SCH5636_NO_FANS] = {
+	0x2C, 0x2E, 0x30, 0x32, 0x62, 0x64, 0x66, 0x68 };
+#define SCH5636_REG_FAN_CTRL(i)		(0x880 + (i))
+/* FAULT in datasheet, but acts as an alarm */
+#define SCH5636_FAN_ALARM		0x04
+#define SCH5636_FAN_NOT_PRESENT		0x08
+#define SCH5636_FAN_DEACTIVATED		0x80
+
+
+struct sch5636_data {
+	unsigned short addr;
+	struct device *hwmon_dev;
+
+	struct mutex update_lock;
+	char valid;			/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+	u8 in[SCH5636_NO_INS];
+	u8 temp_val[SCH5636_NO_TEMPS];
+	u8 temp_ctrl[SCH5636_NO_TEMPS];
+	u16 fan_val[SCH5636_NO_FANS];
+	u8 fan_ctrl[SCH5636_NO_FANS];
+};
+
+static struct sch5636_data *sch5636_update_device(struct device *dev)
+{
+	struct sch5636_data *data = dev_get_drvdata(dev);
+	struct sch5636_data *ret = data;
+	int i, val;
+
+	mutex_lock(&data->update_lock);
+
+	/* Cache the values for 1 second */
+	if (data->valid && !time_after(jiffies, data->last_updated + HZ))
+		goto abort;
+
+	for (i = 0; i < SCH5636_NO_INS; i++) {
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_IN_VAL[i]);
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->in[i] = val;
+	}
+
+	for (i = 0; i < SCH5636_NO_TEMPS; i++) {
+		if (data->temp_ctrl[i] & SCH5636_TEMP_DEACTIVATED)
+			continue;
+
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_TEMP_VAL[i]);
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->temp_val[i] = val;
+
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_TEMP_CTRL(i));
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->temp_ctrl[i] = val;
+		/* Alarms need to be explicitly write-cleared */
+		if (val & SCH5636_TEMP_ALARM) {
+			sch56xx_write_virtual_reg(data->addr,
+						SCH5636_REG_TEMP_CTRL(i), val);
+		}
+	}
+
+	for (i = 0; i < SCH5636_NO_FANS; i++) {
+		if (data->fan_ctrl[i] & SCH5636_FAN_DEACTIVATED)
+			continue;
+
+		val = sch56xx_read_virtual_reg16(data->addr,
+						 SCH5636_REG_FAN_VAL[i]);
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->fan_val[i] = val;
+
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_FAN_CTRL(i));
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->fan_ctrl[i] = val;
+		/* Alarms need to be explicitly write-cleared */
+		if (val & SCH5636_FAN_ALARM) {
+			sch56xx_write_virtual_reg(data->addr,
+						SCH5636_REG_FAN_CTRL(i), val);
+		}
+	}
+
+	data->last_updated = jiffies;
+	data->valid = 1;
+abort:
+	mutex_unlock(&data->update_lock);
+	return ret;
+}
+
+static int reg_to_rpm(u16 reg)
+{
+	if (reg == 0)
+		return -EIO;
+	if (reg == 0xffff)
+		return 0;
+
+	return 5400540 / reg;
+}
+
+static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
+	char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", DEVNAME);
+}
+
+static ssize_t show_in_value(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = DIV_ROUND_CLOSEST(
+		data->in[attr->index] * SCH5636_REG_IN_FACTORS[attr->index],
+		255);
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_in_label(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			SCH5636_IN_LABELS[attr->index]);
+}
+
+static ssize_t show_temp_value(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = (data->temp_val[attr->index] - 64) * 1000;
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_temp_fault(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = (data->temp_ctrl[attr->index] & SCH5636_TEMP_WORKING) ? 0 : 1;
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_temp_alarm(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = (data->temp_ctrl[attr->index] & SCH5636_TEMP_ALARM) ? 1 : 0;
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_fan_value(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = reg_to_rpm(data->fan_val[attr->index]);
+	if (val < 0)
+		return val;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_fan_fault(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = (data->fan_ctrl[attr->index] & SCH5636_FAN_NOT_PRESENT) ? 1 : 0;
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_fan_alarm(struct device *dev, struct device_attribute
+	*devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct sch5636_data *data = sch5636_update_device(dev);
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = (data->fan_ctrl[attr->index] & SCH5636_FAN_ALARM) ? 1 : 0;
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static struct sensor_device_attribute sch5636_attr[] = {
+	SENSOR_ATTR(name, 0444, show_name, NULL, 0),
+	SENSOR_ATTR(in0_input, 0444, show_in_value, NULL, 0),
+	SENSOR_ATTR(in0_label, 0444, show_in_label, NULL, 0),
+	SENSOR_ATTR(in1_input, 0444, show_in_value, NULL, 1),
+	SENSOR_ATTR(in1_label, 0444, show_in_label, NULL, 1),
+	SENSOR_ATTR(in2_input, 0444, show_in_value, NULL, 2),
+	SENSOR_ATTR(in2_label, 0444, show_in_label, NULL, 2),
+	SENSOR_ATTR(in3_input, 0444, show_in_value, NULL, 3),
+	SENSOR_ATTR(in3_label, 0444, show_in_label, NULL, 3),
+	SENSOR_ATTR(in4_input, 0444, show_in_value, NULL, 4),
+	SENSOR_ATTR(in4_label, 0444, show_in_label, NULL, 4),
+};
+
+static struct sensor_device_attribute sch5636_temp_attr[] = {
+	SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0),
+	SENSOR_ATTR(temp1_fault, 0444, show_temp_fault, NULL, 0),
+	SENSOR_ATTR(temp1_alarm, 0444, show_temp_alarm, NULL, 0),
+	SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1),
+	SENSOR_ATTR(temp2_fault, 0444, show_temp_fault, NULL, 1),
+	SENSOR_ATTR(temp2_alarm, 0444, show_temp_alarm, NULL, 1),
+	SENSOR_ATTR(temp3_input, 0444, show_temp_value, NULL, 2),
+	SENSOR_ATTR(temp3_fault, 0444, show_temp_fault, NULL, 2),
+	SENSOR_ATTR(temp3_alarm, 0444, show_temp_alarm, NULL, 2),
+	SENSOR_ATTR(temp4_input, 0444, show_temp_value, NULL, 3),
+	SENSOR_ATTR(temp4_fault, 0444, show_temp_fault, NULL, 3),
+	SENSOR_ATTR(temp4_alarm, 0444, show_temp_alarm, NULL, 3),
+	SENSOR_ATTR(temp5_input, 0444, show_temp_value, NULL, 4),
+	SENSOR_ATTR(temp5_fault, 0444, show_temp_fault, NULL, 4),
+	SENSOR_ATTR(temp5_alarm, 0444, show_temp_alarm, NULL, 4),
+	SENSOR_ATTR(temp6_input, 0444, show_temp_value, NULL, 5),
+	SENSOR_ATTR(temp6_fault, 0444, show_temp_fault, NULL, 5),
+	SENSOR_ATTR(temp6_alarm, 0444, show_temp_alarm, NULL, 5),
+	SENSOR_ATTR(temp7_input, 0444, show_temp_value, NULL, 6),
+	SENSOR_ATTR(temp7_fault, 0444, show_temp_fault, NULL, 6),
+	SENSOR_ATTR(temp7_alarm, 0444, show_temp_alarm, NULL, 6),
+	SENSOR_ATTR(temp8_input, 0444, show_temp_value, NULL, 7),
+	SENSOR_ATTR(temp8_fault, 0444, show_temp_fault, NULL, 7),
+	SENSOR_ATTR(temp8_alarm, 0444, show_temp_alarm, NULL, 7),
+	SENSOR_ATTR(temp9_input, 0444, show_temp_value, NULL, 8),
+	SENSOR_ATTR(temp9_fault, 0444, show_temp_fault, NULL, 8),
+	SENSOR_ATTR(temp9_alarm, 0444, show_temp_alarm, NULL, 8),
+	SENSOR_ATTR(temp10_input, 0444, show_temp_value, NULL, 9),
+	SENSOR_ATTR(temp10_fault, 0444, show_temp_fault, NULL, 9),
+	SENSOR_ATTR(temp10_alarm, 0444, show_temp_alarm, NULL, 9),
+	SENSOR_ATTR(temp11_input, 0444, show_temp_value, NULL, 10),
+	SENSOR_ATTR(temp11_fault, 0444, show_temp_fault, NULL, 10),
+	SENSOR_ATTR(temp11_alarm, 0444, show_temp_alarm, NULL, 10),
+	SENSOR_ATTR(temp12_input, 0444, show_temp_value, NULL, 11),
+	SENSOR_ATTR(temp12_fault, 0444, show_temp_fault, NULL, 11),
+	SENSOR_ATTR(temp12_alarm, 0444, show_temp_alarm, NULL, 11),
+	SENSOR_ATTR(temp13_input, 0444, show_temp_value, NULL, 12),
+	SENSOR_ATTR(temp13_fault, 0444, show_temp_fault, NULL, 12),
+	SENSOR_ATTR(temp13_alarm, 0444, show_temp_alarm, NULL, 12),
+	SENSOR_ATTR(temp14_input, 0444, show_temp_value, NULL, 13),
+	SENSOR_ATTR(temp14_fault, 0444, show_temp_fault, NULL, 13),
+	SENSOR_ATTR(temp14_alarm, 0444, show_temp_alarm, NULL, 13),
+	SENSOR_ATTR(temp15_input, 0444, show_temp_value, NULL, 14),
+	SENSOR_ATTR(temp15_fault, 0444, show_temp_fault, NULL, 14),
+	SENSOR_ATTR(temp15_alarm, 0444, show_temp_alarm, NULL, 14),
+	SENSOR_ATTR(temp16_input, 0444, show_temp_value, NULL, 15),
+	SENSOR_ATTR(temp16_fault, 0444, show_temp_fault, NULL, 15),
+	SENSOR_ATTR(temp16_alarm, 0444, show_temp_alarm, NULL, 15),
+};
+
+static struct sensor_device_attribute sch5636_fan_attr[] = {
+	SENSOR_ATTR(fan1_input, 0444, show_fan_value, NULL, 0),
+	SENSOR_ATTR(fan1_fault, 0444, show_fan_fault, NULL, 0),
+	SENSOR_ATTR(fan1_alarm, 0444, show_fan_alarm, NULL, 0),
+	SENSOR_ATTR(fan2_input, 0444, show_fan_value, NULL, 1),
+	SENSOR_ATTR(fan2_fault, 0444, show_fan_fault, NULL, 1),
+	SENSOR_ATTR(fan2_alarm, 0444, show_fan_alarm, NULL, 1),
+	SENSOR_ATTR(fan3_input, 0444, show_fan_value, NULL, 2),
+	SENSOR_ATTR(fan3_fault, 0444, show_fan_fault, NULL, 2),
+	SENSOR_ATTR(fan3_alarm, 0444, show_fan_alarm, NULL, 2),
+	SENSOR_ATTR(fan4_input, 0444, show_fan_value, NULL, 3),
+	SENSOR_ATTR(fan4_fault, 0444, show_fan_fault, NULL, 3),
+	SENSOR_ATTR(fan4_alarm, 0444, show_fan_alarm, NULL, 3),
+	SENSOR_ATTR(fan5_input, 0444, show_fan_value, NULL, 4),
+	SENSOR_ATTR(fan5_fault, 0444, show_fan_fault, NULL, 4),
+	SENSOR_ATTR(fan5_alarm, 0444, show_fan_alarm, NULL, 4),
+	SENSOR_ATTR(fan6_input, 0444, show_fan_value, NULL, 5),
+	SENSOR_ATTR(fan6_fault, 0444, show_fan_fault, NULL, 5),
+	SENSOR_ATTR(fan6_alarm, 0444, show_fan_alarm, NULL, 5),
+	SENSOR_ATTR(fan7_input, 0444, show_fan_value, NULL, 6),
+	SENSOR_ATTR(fan7_fault, 0444, show_fan_fault, NULL, 6),
+	SENSOR_ATTR(fan7_alarm, 0444, show_fan_alarm, NULL, 6),
+	SENSOR_ATTR(fan8_input, 0444, show_fan_value, NULL, 7),
+	SENSOR_ATTR(fan8_fault, 0444, show_fan_fault, NULL, 7),
+	SENSOR_ATTR(fan8_alarm, 0444, show_fan_alarm, NULL, 7),
+};
+
+static int sch5636_remove(struct platform_device *pdev)
+{
+	struct sch5636_data *data = platform_get_drvdata(pdev);
+	int i;
+
+	if (data->hwmon_dev)
+		hwmon_device_unregister(data->hwmon_dev);
+
+	for (i = 0; i < ARRAY_SIZE(sch5636_attr); i++)
+		device_remove_file(&pdev->dev, &sch5636_attr[i].dev_attr);
+
+	for (i = 0; i < SCH5636_NO_TEMPS * 3; i++)
+		device_remove_file(&pdev->dev,
+				   &sch5636_temp_attr[i].dev_attr);
+
+	for (i = 0; i < SCH5636_NO_FANS * 3; i++)
+		device_remove_file(&pdev->dev,
+				   &sch5636_fan_attr[i].dev_attr);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(data);
+
+	return 0;
+}
+
+static int __devinit sch5636_probe(struct platform_device *pdev)
+{
+	struct sch5636_data *data;
+	int i, err, val, revision[2];
+	char id[4];
+
+	data = kzalloc(sizeof(struct sch5636_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
+	mutex_init(&data->update_lock);
+	platform_set_drvdata(pdev, data);
+
+	for (i = 0; i < 3; i++) {
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_FUJITSU_ID + i);
+		if (val < 0) {
+			pr_err("Could not read Fujitsu id byte at %#x\n",
+				SCH5636_REG_FUJITSU_ID + i);
+			err = val;
+			goto error;
+		}
+		id[i] = val;
+	}
+	id[i] = '\0';
+
+	if (strcmp(id, "THS")) {
+		pr_err("Unknown Fujitsu id: %02x%02x%02x\n",
+		       id[0], id[1], id[2]);
+		err = -ENODEV;
+		goto error;
+	}
+
+	for (i = 0; i < 2; i++) {
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_FUJITSU_REV + i);
+		if (val < 0) {
+			err = val;
+			goto error;
+		}
+		revision[i] = val;
+	}
+	pr_info("Found %s chip at %#hx, revison: %d.%02d\n", DEVNAME,
+		data->addr, revision[0], revision[1]);
+
+	/* Read all temp + fan ctrl registers to determine which are active */
+	for (i = 0; i < SCH5636_NO_TEMPS; i++) {
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_TEMP_CTRL(i));
+		if (unlikely(val < 0)) {
+			err = val;
+			goto error;
+		}
+		data->temp_ctrl[i] = val;
+	}
+
+	for (i = 0; i < SCH5636_NO_FANS; i++) {
+		val = sch56xx_read_virtual_reg(data->addr,
+					       SCH5636_REG_FAN_CTRL(i));
+		if (unlikely(val < 0)) {
+			err = val;
+			goto error;
+		}
+		data->fan_ctrl[i] = val;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sch5636_attr); i++) {
+		err = device_create_file(&pdev->dev,
+					 &sch5636_attr[i].dev_attr);
+		if (err)
+			goto error;
+	}
+
+	for (i = 0; i < (SCH5636_NO_TEMPS * 3); i++) {
+		if (data->temp_ctrl[i/3] & SCH5636_TEMP_DEACTIVATED)
+			continue;
+
+		err = device_create_file(&pdev->dev,
+					&sch5636_temp_attr[i].dev_attr);
+		if (err)
+			goto error;
+	}
+
+	for (i = 0; i < (SCH5636_NO_FANS * 3); i++) {
+		if (data->fan_ctrl[i/3] & SCH5636_FAN_DEACTIVATED)
+			continue;
+
+		err = device_create_file(&pdev->dev,
+					&sch5636_fan_attr[i].dev_attr);
+		if (err)
+			goto error;
+	}
+
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		data->hwmon_dev = NULL;
+		goto error;
+	}
+
+	return 0;
+
+error:
+	sch5636_remove(pdev);
+	return err;
+}
+
+static struct platform_driver sch5636_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= DRVNAME,
+	},
+	.probe		= sch5636_probe,
+	.remove		= sch5636_remove,
+};
+
+static int __init sch5636_init(void)
+{
+	return platform_driver_register(&sch5636_driver);
+}
+
+static void __exit sch5636_exit(void)
+{
+	platform_driver_unregister(&sch5636_driver);
+}
+
+MODULE_DESCRIPTION("SMSC SCH5636 Hardware Monitoring Driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");
+
+module_init(sch5636_init);
+module_exit(sch5636_exit);
diff --git a/drivers/hwmon/sch56xx-common.c b/drivers/hwmon/sch56xx-common.c
new file mode 100644
index 000000000000..fac32ee0b10e
--- /dev/null
+++ b/drivers/hwmon/sch56xx-common.c
@@ -0,0 +1,340 @@
+/***************************************************************************
+ *   Copyright (C) 2010-2011 Hans de Goede <hdegoede@redhat.com>           *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program; if not, write to the                         *
+ *   Free Software Foundation, Inc.,                                       *
+ *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ ***************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include "sch56xx-common.h"
+
+#define SIO_SCH56XX_LD_EM	0x0C	/* Embedded uController Logical Dev */
+#define SIO_UNLOCK_KEY		0x55	/* Key to enable Super-I/O */
+#define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
+
+#define SIO_REG_LDSEL		0x07	/* Logical device select */
+#define SIO_REG_DEVID		0x20	/* Device ID */
+#define SIO_REG_ENABLE		0x30	/* Logical device enable */
+#define SIO_REG_ADDR		0x66	/* Logical device address (2 bytes) */
+
+#define SIO_SCH5627_ID		0xC6	/* Chipset ID */
+#define SIO_SCH5636_ID		0xC7	/* Chipset ID */
+
+#define REGION_LENGTH		9
+
+#define SCH56XX_CMD_READ	0x02
+#define SCH56XX_CMD_WRITE	0x03
+
+static struct platform_device *sch56xx_pdev;
+
+/* Super I/O functions */
+static inline int superio_inb(int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static inline int superio_enter(int base)
+{
+	/* Don't step on other drivers' I/O space by accident */
+	if (!request_muxed_region(base, 2, "sch56xx")) {
+		pr_err("I/O address 0x%04x already in use\n", base);
+		return -EBUSY;
+	}
+
+	outb(SIO_UNLOCK_KEY, base);
+
+	return 0;
+}
+
+static inline void superio_select(int base, int ld)
+{
+	outb(SIO_REG_LDSEL, base);
+	outb(ld, base + 1);
+}
+
+static inline void superio_exit(int base)
+{
+	outb(SIO_LOCK_KEY, base);
+	release_region(base, 2);
+}
+
+static int sch56xx_send_cmd(u16 addr, u8 cmd, u16 reg, u8 v)
+{
+	u8 val;
+	int i;
+	/*
+	 * According to SMSC for the commands we use the maximum time for
+	 * the EM to respond is 15 ms, but testing shows in practice it
+	 * responds within 15-32 reads, so we first busy poll, and if
+	 * that fails sleep a bit and try again until we are way past
+	 * the 15 ms maximum response time.
+	 */
+	const int max_busy_polls = 64;
+	const int max_lazy_polls = 32;
+
+	/* (Optional) Write-Clear the EC to Host Mailbox Register */
+	val = inb(addr + 1);
+	outb(val, addr + 1);
+
+	/* Set Mailbox Address Pointer to first location in Region 1 */
+	outb(0x00, addr + 2);
+	outb(0x80, addr + 3);
+
+	/* Write Request Packet Header */
+	outb(cmd, addr + 4); /* VREG Access Type read:0x02 write:0x03 */
+	outb(0x01, addr + 5); /* # of Entries: 1 Byte (8-bit) */
+	outb(0x04, addr + 2); /* Mailbox AP to first data entry loc. */
+
+	/* Write Value field */
+	if (cmd == SCH56XX_CMD_WRITE)
+		outb(v, addr + 4);
+
+	/* Write Address field */
+	outb(reg & 0xff, addr + 6);
+	outb(reg >> 8, addr + 7);
+
+	/* Execute the Random Access Command */
+	outb(0x01, addr); /* Write 01h to the Host-to-EC register */
+
+	/* EM Interface Polling "Algorithm" */
+	for (i = 0; i < max_busy_polls + max_lazy_polls; i++) {
+		if (i >= max_busy_polls)
+			msleep(1);
+		/* Read Interrupt source Register */
+		val = inb(addr + 8);
+		/* Write Clear the interrupt source bits */
+		if (val)
+			outb(val, addr + 8);
+		/* Command Completed ? */
+		if (val & 0x01)
+			break;
+	}
+	if (i == max_busy_polls + max_lazy_polls) {
+		pr_err("Max retries exceeded reading virtual "
+		       "register 0x%04hx (%d)\n", reg, 1);
+		return -EIO;
+	}
+
+	/*
+	 * According to SMSC we may need to retry this, but sofar I've always
+	 * seen this succeed in 1 try.
+	 */
+	for (i = 0; i < max_busy_polls; i++) {
+		/* Read EC-to-Host Register */
+		val = inb(addr + 1);
+		/* Command Completed ? */
+		if (val == 0x01)
+			break;
+
+		if (i == 0)
+			pr_warn("EC reports: 0x%02x reading virtual register "
+				"0x%04hx\n", (unsigned int)val, reg);
+	}
+	if (i == max_busy_polls) {
+		pr_err("Max retries exceeded reading virtual "
+		       "register 0x%04hx (%d)\n", reg, 2);
+		return -EIO;
+	}
+
+	/*
+	 * According to the SMSC app note we should now do:
+	 *
+	 * Set Mailbox Address Pointer to first location in Region 1 *
+	 * outb(0x00, addr + 2);
+	 * outb(0x80, addr + 3);
+	 *
+	 * But if we do that things don't work, so let's not.
+	 */
+
+	/* Read Value field */
+	if (cmd == SCH56XX_CMD_READ)
+		return inb(addr + 4);
+
+	return 0;
+}
+
+int sch56xx_read_virtual_reg(u16 addr, u16 reg)
+{
+	return sch56xx_send_cmd(addr, SCH56XX_CMD_READ, reg, 0);
+}
+EXPORT_SYMBOL(sch56xx_read_virtual_reg);
+
+int sch56xx_write_virtual_reg(u16 addr, u16 reg, u8 val)
+{
+	return sch56xx_send_cmd(addr, SCH56XX_CMD_WRITE, reg, val);
+}
+EXPORT_SYMBOL(sch56xx_write_virtual_reg);
+
+int sch56xx_read_virtual_reg16(u16 addr, u16 reg)
+{
+	int lsb, msb;
+
+	/* Read LSB first, this will cause the matching MSB to be latched */
+	lsb = sch56xx_read_virtual_reg(addr, reg);
+	if (lsb < 0)
+		return lsb;
+
+	msb = sch56xx_read_virtual_reg(addr, reg + 1);
+	if (msb < 0)
+		return msb;
+
+	return lsb | (msb << 8);
+}
+EXPORT_SYMBOL(sch56xx_read_virtual_reg16);
+
+int sch56xx_read_virtual_reg12(u16 addr, u16 msb_reg, u16 lsn_reg,
+			       int high_nibble)
+{
+	int msb, lsn;
+
+	/* Read MSB first, this will cause the matching LSN to be latched */
+	msb = sch56xx_read_virtual_reg(addr, msb_reg);
+	if (msb < 0)
+		return msb;
+
+	lsn = sch56xx_read_virtual_reg(addr, lsn_reg);
+	if (lsn < 0)
+		return lsn;
+
+	if (high_nibble)
+		return (msb << 4) | (lsn >> 4);
+	else
+		return (msb << 4) | (lsn & 0x0f);
+}
+EXPORT_SYMBOL(sch56xx_read_virtual_reg12);
+
+static int __init sch56xx_find(int sioaddr, unsigned short *address,
+			       const char **name)
+{
+	u8 devid;
+	int err;
+
+	err = superio_enter(sioaddr);
+	if (err)
+		return err;
+
+	devid = superio_inb(sioaddr, SIO_REG_DEVID);
+	switch (devid) {
+	case SIO_SCH5627_ID:
+		*name = "sch5627";
+		break;
+	case SIO_SCH5636_ID:
+		*name = "sch5636";
+		break;
+	default:
+		pr_debug("Unsupported device id: 0x%02x\n",
+			 (unsigned int)devid);
+		err = -ENODEV;
+		goto exit;
+	}
+
+	superio_select(sioaddr, SIO_SCH56XX_LD_EM);
+
+	if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
+		pr_warn("Device not activated\n");
+		err = -ENODEV;
+		goto exit;
+	}
+
+	/*
+	 * Warning the order of the low / high byte is the other way around
+	 * as on most other superio devices!!
+	 */
+	*address = superio_inb(sioaddr, SIO_REG_ADDR) |
+		   superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8;
+	if (*address == 0) {
+		pr_warn("Base address not set\n");
+		err = -ENODEV;
+		goto exit;
+	}
+
+exit:
+	superio_exit(sioaddr);
+	return err;
+}
+
+static int __init sch56xx_device_add(unsigned short address, const char *name)
+{
+	struct resource res = {
+		.start	= address,
+		.end	= address + REGION_LENGTH - 1,
+		.flags	= IORESOURCE_IO,
+	};
+	int err;
+
+	sch56xx_pdev = platform_device_alloc(name, address);
+	if (!sch56xx_pdev)
+		return -ENOMEM;
+
+	res.name = sch56xx_pdev->name;
+	err = acpi_check_resource_conflict(&res);
+	if (err)
+		goto exit_device_put;
+
+	err = platform_device_add_resources(sch56xx_pdev, &res, 1);
+	if (err) {
+		pr_err("Device resource addition failed\n");
+		goto exit_device_put;
+	}
+
+	err = platform_device_add(sch56xx_pdev);
+	if (err) {
+		pr_err("Device addition failed\n");
+		goto exit_device_put;
+	}
+
+	return 0;
+
+exit_device_put:
+	platform_device_put(sch56xx_pdev);
+
+	return err;
+}
+
+static int __init sch56xx_init(void)
+{
+	int err;
+	unsigned short address;
+	const char *name;
+
+	err = sch56xx_find(0x4e, &address, &name);
+	if (err)
+		err = sch56xx_find(0x2e, &address, &name);
+	if (err)
+		return err;
+
+	return sch56xx_device_add(address, name);
+}
+
+static void __exit sch56xx_exit(void)
+{
+	platform_device_unregister(sch56xx_pdev);
+}
+
+MODULE_DESCRIPTION("SMSC SCH56xx Hardware Monitoring Common Code");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");
+
+module_init(sch56xx_init);
+module_exit(sch56xx_exit);
diff --git a/drivers/hwmon/sch56xx-common.h b/drivers/hwmon/sch56xx-common.h
new file mode 100644
index 000000000000..d5eaf3b9ebf5
--- /dev/null
+++ b/drivers/hwmon/sch56xx-common.h
@@ -0,0 +1,24 @@
+/***************************************************************************
+ *   Copyright (C) 2010-2011 Hans de Goede <hdegoede@redhat.com>           *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program; if not, write to the                         *
+ *   Free Software Foundation, Inc.,                                       *
+ *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ ***************************************************************************/
+
+int sch56xx_read_virtual_reg(u16 addr, u16 reg);
+int sch56xx_write_virtual_reg(u16 addr, u16 reg, u8 val);
+int sch56xx_read_virtual_reg16(u16 addr, u16 reg);
+int sch56xx_read_virtual_reg12(u16 addr, u16 msb_reg, u16 lsn_reg,
+			       int high_nibble);
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index cf4330b352ef..7d231cf5d2ce 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -671,7 +671,7 @@ static ssize_t sht15_show_status(struct device *dev,
  * @buf:	sysfs buffer to read the new heater state from.
  * @count:	length of the data.
  *
- * Will be called on read access to heater_enable sysfs attribute.
+ * Will be called on write access to heater_enable sysfs attribute.
  * Returns number of bytes actually decoded, negative errno on error.
  */
 static ssize_t sht15_store_heater(struct device *dev,
diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c
index 0d18de424c66..8eac67d769fa 100644
--- a/drivers/hwmon/via-cputemp.c
+++ b/drivers/hwmon/via-cputemp.c
@@ -27,6 +27,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
 #include <linux/sysfs.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
@@ -48,8 +49,10 @@ enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME };
 struct via_cputemp_data {
 	struct device *hwmon_dev;
 	const char *name;
+	u8 vrm;
 	u32 id;
-	u32 msr;
+	u32 msr_temp;
+	u32 msr_vid;
 };
 
 /*
@@ -77,13 +80,27 @@ static ssize_t show_temp(struct device *dev,
 	u32 eax, edx;
 	int err;
 
-	err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx);
+	err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx);
 	if (err)
 		return -EAGAIN;
 
 	return sprintf(buf, "%lu\n", ((unsigned long)eax & 0xffffff) * 1000);
 }
 
+static ssize_t show_cpu_vid(struct device *dev,
+			    struct device_attribute *devattr, char *buf)
+{
+	struct via_cputemp_data *data = dev_get_drvdata(dev);
+	u32 eax, edx;
+	int err;
+
+	err = rdmsr_safe_on_cpu(data->id, data->msr_vid, &eax, &edx);
+	if (err)
+		return -EAGAIN;
+
+	return sprintf(buf, "%d\n", vid_from_reg(~edx & 0x7f, data->vrm));
+}
+
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL,
 			  SHOW_TEMP);
 static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL);
@@ -100,6 +117,9 @@ static const struct attribute_group via_cputemp_group = {
 	.attrs = via_cputemp_attributes,
 };
 
+/* Optional attributes */
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_cpu_vid, NULL);
+
 static int __devinit via_cputemp_probe(struct platform_device *pdev)
 {
 	struct via_cputemp_data *data;
@@ -122,11 +142,12 @@ static int __devinit via_cputemp_probe(struct platform_device *pdev)
 		/* C7 A */
 	case 0xD:
 		/* C7 D */
-		data->msr = 0x1169;
+		data->msr_temp = 0x1169;
+		data->msr_vid = 0x198;
 		break;
 	case 0xF:
 		/* Nano */
-		data->msr = 0x1423;
+		data->msr_temp = 0x1423;
 		break;
 	default:
 		err = -ENODEV;
@@ -134,7 +155,7 @@ static int __devinit via_cputemp_probe(struct platform_device *pdev)
 	}
 
 	/* test if we can access the TEMPERATURE MSR */
-	err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx);
+	err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx);
 	if (err) {
 		dev_err(&pdev->dev,
 			"Unable to access TEMPERATURE MSR, giving up\n");
@@ -147,6 +168,15 @@ static int __devinit via_cputemp_probe(struct platform_device *pdev)
 	if (err)
 		goto exit_free;
 
+	if (data->msr_vid)
+		data->vrm = vid_which_vrm();
+
+	if (data->vrm) {
+		err = device_create_file(&pdev->dev, &dev_attr_cpu0_vid);
+		if (err)
+			goto exit_remove;
+	}
+
 	data->hwmon_dev = hwmon_device_register(&pdev->dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);
@@ -158,6 +188,8 @@ static int __devinit via_cputemp_probe(struct platform_device *pdev)
 	return 0;
 
 exit_remove:
+	if (data->vrm)
+		device_remove_file(&pdev->dev, &dev_attr_cpu0_vid);
 	sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group);
 exit_free:
 	platform_set_drvdata(pdev, NULL);
@@ -171,6 +203,8 @@ static int __devexit via_cputemp_remove(struct platform_device *pdev)
 	struct via_cputemp_data *data = platform_get_drvdata(pdev);
 
 	hwmon_device_unregister(data->hwmon_dev);
+	if (data->vrm)
+		device_remove_file(&pdev->dev, &dev_attr_cpu0_vid);
 	sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group);
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);