diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2008-01-29 08:49:49 +1100 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-01-29 08:49:49 +1100 |
| commit | bb04af0e2e5bcd8d1a5d7f7d5c704f7eb328f241 (patch) | |
| tree | fd67625ba9758dceff28dfca39127d7f07dae981 | |
| parent | 0affa456cb6da51a31a6dd76b3d8827f467f807d (diff) | |
| parent | 0ff66f0c7a5f1f4f5a0d91341b6f71fd2a49f0fa (diff) | |
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (176 commits)
[ARM] 4795/1: S3C244X: Add armclk and setparent call
[ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
[ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
[ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
[ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
[ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
[ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
[ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.
[ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number
[ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
[ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
[ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
[ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
[ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
[ARM] 4781/1: S3C24XX: DMA suspend and resume support
[ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
[ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
[ARM] 4778/1: S3C2412: Add armclk and init from DVS state
[ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
[ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
...
310 files changed, 28420 insertions, 3211 deletions
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt index 555c8cf3650a..af3b925ece08 100644 --- a/Documentation/cpu-freq/user-guide.txt +++ b/Documentation/cpu-freq/user-guide.txt @@ -45,6 +45,7 @@ The following ARM processors are supported by cpufreq: ARM Integrator ARM-SA1100 ARM-SA1110 +Intel PXA 1.2 x86 diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index cb12ae175aa2..53a63890aea4 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -141,6 +141,7 @@ architectures: - ppc64 - ia64 (Does not support probes on instruction slot1.) - sparc64 (Return probes not yet implemented.) +- arm 3. Configuring Kprobes diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a04f507e7f2c..de211ac3853e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -180,8 +180,8 @@ config ARCH_AT91 bool "Atmel AT91" select GENERIC_GPIO help - This enables support for systems based on the Atmel AT91RM9200 - and AT91SAM9xxx processors. + This enables support for systems based on the Atmel AT91RM9200, + AT91SAM9 and AT91CAP9 processors. config ARCH_CLPS7500 bool "Cirrus CL-PS7500FE" @@ -217,6 +217,7 @@ config ARCH_EP93XX bool "EP93xx-based" select ARM_AMBA select ARM_VIC + select GENERIC_GPIO help This enables support for the Cirrus EP93xx series of CPUs. @@ -333,6 +334,16 @@ config ARCH_MXC help Support for Freescale MXC/iMX-based family of processors +config ARCH_ORION + bool "Marvell Orion" + depends on MMU + select PCI + select GENERIC_GPIO + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + help + Support for Marvell Orion System on Chip family. + config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" help @@ -345,6 +356,7 @@ config ARCH_PXA select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS + select TICK_ONESHOT help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. @@ -366,6 +378,7 @@ config ARCH_SA1100 select ARCH_DISCONTIGMEM_ENABLE select ARCH_MTD_XIP select GENERIC_GPIO + select GENERIC_TIME help Support for StrongARM 11x0 based boards. @@ -409,6 +422,17 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1 and OMAP2). +config ARCH_MSM7X00A + bool "Qualcomm MSM7X00A" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + help + Support for Qualcomm MSM7X00A based systems. This runs on the ARM11 + apps processor of the MSM7X00A and depends on a shared memory + interface to the ARM9 modem processor which runs the baseband stack + and controls some vital subsystems (clock and power control, etc). + <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp> + endchoice source "arch/arm/mach-clps711x/Kconfig" @@ -441,6 +465,8 @@ source "arch/arm/mach-omap1/Kconfig" source "arch/arm/mach-omap2/Kconfig" +source "arch/arm/mach-orion/Kconfig" + source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s3c/Kconfig" @@ -477,6 +503,8 @@ source "arch/arm/mach-davinci/Kconfig" source "arch/arm/mach-ks8695/Kconfig" +source "arch/arm/mach-msm/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool @@ -657,6 +685,7 @@ config HZ default 128 if ARCH_L7200 default 200 if ARCH_EBSA110 || ARCH_S3C2410 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER + default AT91_TIMER_HZ if ARCH_AT91 default 100 config AEABI @@ -716,7 +745,7 @@ config LEDS ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \ - ARCH_KS8695 + ARCH_KS8695 || MACH_RD88F5182 help If you say Y here, the LEDs on your machine will be used to provide useful information about your current system status. @@ -867,7 +896,7 @@ config KEXEC endmenu -if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX ) +if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA) menu "CPU Frequency scaling" @@ -903,6 +932,12 @@ config CPU_FREQ_IMX If in doubt, say N. +config CPU_FREQ_PXA + bool + depends on CPU_FREQ && ARCH_PXA && PXA25x + default y + select CPU_FREQ_DEFAULT_GOV_USERSPACE + endmenu endif @@ -951,7 +986,7 @@ config FPE_FASTFPE config VFP bool "VFP-format floating point maths" - depends on CPU_V6 || CPU_ARM926T + depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON help Say Y to include VFP support code in the kernel. This is needed if your hardware includes a VFP unit. @@ -961,6 +996,18 @@ config VFP Say N if your target does not have VFP hardware. +config VFPv3 + bool + depends on VFP + default y if CPU_V7 + +config NEON + bool "Advanced SIMD (NEON) Extension support" + depends on VFPv3 && CPU_V7 + help + Say Y to include support code for NEON, the ARMv7 Advanced SIMD + Extension. + endmenu menu "Userspace binary formats" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 18101f5f5f24..192ee01a9ba2 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -43,6 +43,12 @@ config DEBUG_ERRORS you are concerned with the code size or don't want to see these messages. +config DEBUG_STACK_USAGE + bool "Enable stack utilization instrumentation" + depends on DEBUG_KERNEL + help + Enables the display of the minimum amount of free stack which each + task has ever had available in the sysrq-T output. # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL diff --git a/arch/arm/Kconfig.instrumentation b/arch/arm/Kconfig.instrumentation index 63b8c6d5606a..453ad8e15d69 100644 --- a/arch/arm/Kconfig.instrumentation +++ b/arch/arm/Kconfig.instrumentation @@ -43,6 +43,16 @@ config OPROFILE_MPCORE config OPROFILE_ARM11_CORE bool +config KPROBES + bool "Kprobes" + depends on KALLSYMS && MODULES && !UML && !XIP_KERNEL + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". + config MARKERS bool "Activate markers" help diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 35e56c99ad1d..7b8ff66febe1 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -139,6 +139,8 @@ endif machine-$(CONFIG_ARCH_KS8695) := ks8695 incdir-$(CONFIG_ARCH_MXC) := mxc machine-$(CONFIG_ARCH_MX3) := mx3 + machine-$(CONFIG_ARCH_ORION) := orion + machine-$(CONFIG_ARCH_MSM7X00A) := msm ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 5fde99f9d9f9..de9d9ee50958 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -44,10 +44,6 @@ ifeq ($(CONFIG_PXA_SHARPSL),y) OBJS += head-sharpsl.o endif -ifeq ($(CONFIG_ARCH_AT91RM9200),y) -OBJS += head-at91rm9200.o -endif - ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) ifeq ($(CONFIG_CPU_CP15),y) OBJS += big-endian.o diff --git a/arch/arm/boot/compressed/head-at91rm9200.S b/arch/arm/boot/compressed/head-at91rm9200.S deleted file mode 100644 index 11782ccd93a1..000000000000 --- a/arch/arm/boot/compressed/head-at91rm9200.S +++ /dev/null @@ -1,81 +0,0 @@ -/* - * linux/arch/arm/boot/compressed/head-at91rm9200.S - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach-types.h> - - .section ".start", "ax" - - @ Atmel AT91RM9200-DK : 262 - mov r3, #(MACH_TYPE_AT91RM9200DK & 0xff) - orr r3, r3, #(MACH_TYPE_AT91RM9200DK & 0xff00) - cmp r7, r3 - beq 99f - - @ Cogent CSB337 : 399 - mov r3, #(MACH_TYPE_CSB337 & 0xff) - orr r3, r3, #(MACH_TYPE_CSB337 & 0xff00) - cmp r7, r3 - beq 99f - - @ Cogent CSB637 : 648 - mov r3, #(MACH_TYPE_CSB637 & 0xff) - orr r3, r3, #(MACH_TYPE_CSB637 & 0xff00) - cmp r7, r3 - beq 99f - - @ Atmel AT91RM9200-EK : 705 - mov r3, #(MACH_TYPE_AT91RM9200EK & 0xff) - orr r3, r3, #(MACH_TYPE_AT91RM9200EK & 0xff00) - cmp r7, r3 - beq 99f - - @ Conitec Carmeva : 769 - mov r3, #(MACH_TYPE_CARMEVA & 0xff) - orr r3, r3, #(MACH_TYPE_CARMEVA & 0xff00) - cmp r7, r3 - beq 99f - - @ KwikByte KB920x : 612 - mov r3, #(MACH_TYPE_KB9200 & 0xff) - orr r3, r3, #(MACH_TYPE_KB9200 & 0xff00) - cmp r7, r3 - beq 99f - - @ Embest ATEB9200 : 923 - mov r3, #(MACH_TYPE_ATEB9200 & 0xff) - orr r3, r3, #(MACH_TYPE_ATEB9200 & 0xff00) - cmp r7, r3 - beq 99f - - @ Sperry-Sun KAFA : 662 - mov r3, #(MACH_TYPE_KAFA & 0xff) - orr r3, r3, #(MACH_TYPE_KAFA & 0xff00) - cmp r7, r3 - beq 99f - - @ picotux 200 : 963 - mov r3, #(MACH_TYPE_PICOTUX2XX & 0xff) - orr r3, r3, #(MACH_TYPE_PICOTUX2XX & 0xff00) - cmp r7, r3 - beq 99f - - @ Ajeco 1ARM : 1075 - mov r3, #(MACH_TYPE_ONEARM & 0xff) - orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00) - cmp r7, r3 - beq 99f - - @ Unknown board, use the AT91RM9200DK board - @ mov r7, #MACH_TYPE_AT91RM9200 - mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) - orr r7, r7, #(MACH_TYPE_AT91RM9200DK & 0xff00) - -99: diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 5cac46a19bb7..3c2c8f2a1dc4 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -623,6 +623,12 @@ proc_types: b __armv4_mmu_cache_off b __armv4_mmu_cache_flush + .word 0x56055310 @ Feroceon + .word 0xfffffff0 + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv5tej_mmu_cache_flush + @ These match on the architecture ID .word 0x00020000 @ ARMv4T @@ -641,7 +647,7 @@ proc_types: .word 0x000f0000 b __armv4_mmu_cache_on b __armv4_mmu_cache_off - b __armv4_mmu_cache_flush + b __armv5tej_mmu_cache_flush .word 0x0007b000 @ ARMv6 .word 0x000ff000 @@ -821,6 +827,13 @@ iflush: mcr p15, 0, r10, c7, c10, 4 @ drain WB mov pc, lr +__armv5tej_mmu_cache_flush: +1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate D cache + bne 1b + mcr p15, 0, r0, c7, c5, 0 @ flush I cache + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + __armv4_mmu_cache_flush: mov r2, #64*1024 @ default: 32K dcache size (*2) mov r11, #32 @ default: 32 byte line size diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c index bf1075e1f571..f53bca46e23c 100644 --- a/arch/arm/common/rtctime.c +++ b/arch/arm/common/rtctime.c @@ -20,7 +20,6 @@ #include <linux/capability.h> #include <linux/device.h> #include <linux/mutex.h> -#include <linux/rtc.h> #include <asm/rtc.h> #include <asm/semaphore.h> diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig new file mode 100644 index 000000000000..e32e73648129 --- /dev/null +++ b/arch/arm/configs/at91cap9adk_defconfig @@ -0,0 +1,1143 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8 +# Wed Jan 23 22:55:57 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +CONFIG_ARCH_AT91CAP9=y +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91CAP9 Board Type +# +CONFIG_MACH_AT91CAP9ADK=y + +# +# AT91 Board Options +# +CONFIG_MTD_AT91_DATAFLASH_CARD=y +# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=100 + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_AT91=y +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_ATMEL=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +CONFIG_LOGO_LINUX_VGA16=y +# CONFIG_LOGO_LINUX_CLUT224 is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_AT91=y +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_defconfig new file mode 100644 index 000000000000..c3e3418ed4fe --- /dev/null +++ b/arch/arm/configs/colibri_defconfig @@ -0,0 +1,1481 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc3 +# Mon Dec 3 13:36:09 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LSF=y +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +CONFIG_MACH_COLIBRI=y +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_ARMCORE is not set +CONFIG_PXA27x=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_PXA_FICP is not set +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=y +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=y +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +CONFIG_MTD_CFI_LE_BYTE_SWAP=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +CONFIG_MTD_PXA2XX=y +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_DISKONCHIP=y +CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y +CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000 +CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y +CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y +# CONFIG_MTD_NAND_SHARPSL is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_ONENAND=y +# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set +# CONFIG_MTD_ONENAND_GENERIC is not set +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=8 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +CONFIG_DM9000=y +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=y +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +# CONFIG_ZD1211RW is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_SERIAL=m +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +CONFIG_TOUCHSCREEN_UCB1400=y +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_PXA is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SA1100_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +CONFIG_USB_GADGET_DUMMY_HCD=y +CONFIG_USB_DUMMY_HCD=m +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_PXA is not set +CONFIG_NEW_LEDS=y +# CONFIG_LEDS_CLASS is not set + +# +# LED drivers +# + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +CONFIG_RTC_DRV_PCF8583=m +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SA1100 is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=1 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_FS_WBUF_VERIFY=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-15" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_REED_SOLOMON=y +CONFIG_REED_SOLOMON_DEC16=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 970c8c772eb7..4264e273202d 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -367,7 +367,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -CONFIG_MTD_OBSOLETE_CHIPS=y CONFIG_MTD_SHARP=y # CONFIG_MTD_XIP is not set diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig new file mode 100644 index 000000000000..ed487b90dbed --- /dev/null +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -0,0 +1,1499 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.21-hh17 +# Fri Nov 9 20:23:03 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_BOARD_IRQ_MAP_SMALL is not set +CONFIG_BOARD_IRQ_MAP_BIG=y +CONFIG_DMABOUNCE=y + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_TOSHIBA_TMIO_OHCI=y +CONFIG_ARCH_ESERIES=y +CONFIG_MACH_E330=y +CONFIG_MACH_E740=y +CONFIG_MACH_E750=y +CONFIG_MACH_E400=y +CONFIG_MACH_E800=y +CONFIG_E330_LCD=y +CONFIG_E740_LCD=y +CONFIG_E750_LCD=y +CONFIG_E400_LCD=y +CONFIG_E800_LCD=y +CONFIG_ESERIES_UDC=y +CONFIG_E330_TC6387XB=y +CONFIG_E740_T7L66XB=y +CONFIG_E400_T7L66XB=y +CONFIG_E750_E800_TC6393XB=y +CONFIG_E740_PCMCIA=m +CONFIG_E750_PCMCIA=m +CONFIG_E800_PCMCIA=m +# CONFIG_MACH_A620 is not set +# CONFIG_MACH_A716 is not set +# CONFIG_MACH_A730 is not set +# CONFIG_ARCH_H1900 is not set +# CONFIG_ARCH_H2200 is not set +# CONFIG_MACH_H3900 is not set +# CONFIG_MACH_H4000 is not set +# CONFIG_MACH_H4700 is not set +# CONFIG_MACH_HX2750 is not set +# CONFIG_ARCH_H5400 is not set +# CONFIG_MACH_HIMALAYA is not set +# CONFIG_MACH_HTCUNIVERSAL is not set +# CONFIG_MACH_HTCALPINE is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_HTCAPACHE is not set +# CONFIG_MACH_BLUEANGEL is not set + +# +# HTC_HW6X00 +# +# CONFIG_MACH_HTCBEETLES is not set +# CONFIG_MACH_HW6900 is not set +# CONFIG_MACH_HTCATHENA is not set +# CONFIG_ARCH_AXIMX3 is not set +# CONFIG_ARCH_AXIMX5 is not set +# CONFIG_MACH_X50 is not set +# CONFIG_ARCH_ROVERP1 is not set +# CONFIG_ARCH_ROVERP5P is not set +# CONFIG_MACH_XSCALE_PALMLD is not set +# CONFIG_MACH_T3XSCALE is not set +# CONFIG_MACH_RECON is not set +# CONFIG_MACH_GHI270HG is not set +# CONFIG_MACH_GHI270 is not set +# CONFIG_MACH_LOOXC550 is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +CONFIG_PXA25x=y + +# +# Linux As Bootloader +# +# CONFIG_LAB is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=m + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +# CONFIG_TXTOFFSET_DELTA is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set +# CONFIG_DPM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +# CONFIG_PACKET is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_IEEE80211_SOFTMAC is not set +CONFIG_WIRELESS_EXT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=m +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_SHARPSL is not set +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=6144 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=m + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=m +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=m +# CONFIG_HOSTAP_FIRMWARE is not set +# CONFIG_HOSTAP_CS is not set +# CONFIG_ACX is not set +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=m +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_LED_TRIGGER is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_WM9705=y +CONFIG_TOUCHSCREEN_WM9712=y +CONFIG_TOUCHSCREEN_WM9713=y +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_PXA is not set +# CONFIG_RS232_SERIAL is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_SA1100_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_TIHTC is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set +# CONFIG_POWER_SUPPLY is not set + +# +# L3 serial bus support +# +# CONFIG_L3 is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# +# CONFIG_ADC is not set + +# +# Compaq/iPAQ Drivers +# + +# +# Compaq/HP iPAQ Drivers +# +# CONFIG_IPAQ_SLEEVE is not set +# CONFIG_SLEEVE_DEBUG is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_ASIC2 is not set +# CONFIG_HTC_ASIC3 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_BBKEYS is not set +# CONFIG_HTC_ASIC3_DS1WM is not set +# CONFIG_SOC_SAMCOP is not set +# CONFIG_SOC_HAMCOP is not set +# CONFIG_SOC_MQ11XX is not set +CONFIG_SOC_T7L66XB=y +# CONFIG_SOC_TC6387XB is not set +CONFIG_SOC_TC6393XB=y +# CONFIG_SOC_TSC2101 is not set +# CONFIG_SOC_TSC2200 is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_IMAGEON is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +CONFIG_FB_W100=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_VSFB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +CONFIG_FONT_ACORN_8x8=y +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set +# CONFIG_SND_RECON is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# SoC audio support +# +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC=m + +# +# SoC Platforms +# + +# +# SoC Audio for the Atmel AT91 +# + +# +# SoC Audio for the Intel PXA2xx +# +CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_PXA2XX_SOC_AC97=m +CONFIG_SND_PXA2XX_SOC_E740_WM9705=m +CONFIG_SND_PXA2XX_SOC_E750_WM9705=m +CONFIG_SND_PXA2XX_SOC_E800_WM9712=m +# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set +# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set +# CONFIG_SND_PXA2XX_SOC_H5000 is not set + +# +# SoC Audio for the Freescale i.MX +# + +# +# SoC Audio for the Samsung S3C24XX +# +# CONFIG_SND_SOC_AC97_CODEC is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8772 is not set +# CONFIG_SND_SOC_WM8971 is not set +# CONFIG_SND_SOC_WM8956 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8976 is not set +# CONFIG_SND_SOC_WM8974 is not set +# CONFIG_SND_SOC_WM8980 is not set +CONFIG_SND_SOC_WM9705=m +# CONFIG_SND_SOC_WM9713 is not set +CONFIG_SND_SOC_WM9712=m +# CONFIG_SND_SOC_UDA1380 is not set +# CONFIG_SND_SOC_AK4535 is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_MQ11XX is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_CHAR is not set +# CONFIG_USB_PXA2XX_GPIO is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_PXA is not set +CONFIG_MMC_TMIO=y +# CONFIG_MMC_SAMCOP is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index add03c9e5553..988b4d13e76f 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22 -# Thu Jul 19 15:57:52 2007 +# Linux kernel version: 2.6.24-rc5 +# Wed Dec 12 16:11:03 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y @@ -45,10 +41,15 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -69,7 +70,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -130,6 +130,7 @@ CONFIG_ARCH_IOP13XX=y # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -151,9 +152,12 @@ CONFIG_MACH_IQ81340SC=y CONFIG_MACH_IQ81340MC=y # -# IOP13XX IMU Support +# Boot options +# + +# +# Power management # -# CONFIG_IOP_IMU is not set CONFIG_PLAT_IOP=y # @@ -185,10 +189,7 @@ CONFIG_PCI=y CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # @@ -207,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -246,6 +248,7 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -285,6 +288,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -324,10 +328,6 @@ CONFIG_IPV6=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -356,6 +356,7 @@ CONFIG_IPV6=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -383,6 +384,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -423,6 +425,7 @@ CONFIG_MTD_PHYSMAP_START=0xfa000000 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -463,6 +466,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # # SCSI device support @@ -499,12 +507,9 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=y -CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -515,6 +520,7 @@ CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -555,14 +561,8 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -577,6 +577,8 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y @@ -585,6 +587,7 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -592,6 +595,7 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -600,11 +604,14 @@ CONFIG_E1000_NAPI=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # @@ -639,7 +646,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -688,12 +694,10 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -758,9 +762,9 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -768,12 +772,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -787,14 +792,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -806,29 +814,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set +# CONFIG_WATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices @@ -840,14 +837,16 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -862,6 +861,7 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -877,16 +877,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# Real Time Clock -# +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +CONFIG_DMADEVICES=y # -# DMA Engine support +# DMA Devices # +CONFIG_INTEL_IOP_ADMA=y CONFIG_DMA_ENGINE=y # @@ -895,12 +894,6 @@ CONFIG_DMA_ENGINE=y # CONFIG_NET_DMA is not set # -# DMA Devices -# -# CONFIG_INTEL_IOATDMA is not set -CONFIG_INTEL_IOP_ADMA=y - -# # File systems # CONFIG_EXT2_FS=y @@ -912,7 +905,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -952,7 +944,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -969,10 +960,12 @@ CONFIG_ECRYPT_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y @@ -981,10 +974,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1037,10 +1027,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1081,21 +1067,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1104,6 +1085,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # @@ -1112,6 +1094,7 @@ CONFIG_DEBUG_USER=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y @@ -1136,6 +1119,7 @@ CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=y +# CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1150,11 +1134,13 @@ CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_ANUBIS=y +# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_HW=y # diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index 027aef22b4d1..83f40d4041a6 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22 -# Thu Jul 19 16:00:36 2007 +# Linux kernel version: 2.6.24-rc5 +# Wed Dec 12 15:49:08 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -45,9 +41,14 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -69,7 +70,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -130,6 +130,7 @@ CONFIG_ARCH_IOP32X=y # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -153,6 +154,15 @@ CONFIG_ARCH_IQ80321=y CONFIG_ARCH_IQ31244=y CONFIG_MACH_N2100=y CONFIG_IOP3XX_ATU=y +# CONFIG_MACH_EM7210 is not set + +# +# Boot options +# + +# +# Power management +# CONFIG_PLAT_IOP=y # @@ -182,11 +192,8 @@ CONFIG_XSCALE_PMU=y CONFIG_PCI=y CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -205,6 +212,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -244,6 +252,7 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -282,6 +291,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -321,10 +331,6 @@ CONFIG_IPV6=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -353,6 +359,7 @@ CONFIG_IPV6=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -382,6 +389,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -417,6 +425,7 @@ CONFIG_MTD_PHYSMAP_START=0x0 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -459,6 +468,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_IDE is not set # @@ -496,12 +510,9 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -512,6 +523,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -576,6 +588,7 @@ CONFIG_SATA_VITESSE=y # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set @@ -606,14 +619,8 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -628,6 +635,8 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -641,13 +650,16 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set @@ -667,6 +679,7 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -675,6 +688,7 @@ CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -683,11 +697,14 @@ CONFIG_R8169=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # @@ -703,7 +720,6 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -732,7 +748,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -781,12 +796,10 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -852,9 +865,9 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -862,12 +875,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -881,14 +895,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -900,29 +917,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set +# CONFIG_WATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices @@ -935,14 +941,16 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -957,6 +965,7 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -1013,6 +1022,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set @@ -1070,28 +1080,66 @@ CONFIG_USB_MON=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# Real Time Clock +# RTC interfaces # -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Engine support +# I2C RTC drivers # -CONFIG_DMA_ENGINE=y +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # -# DMA Clients +# SPI RTC drivers # -CONFIG_NET_DMA=y + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_DMADEVICES=y # # DMA Devices # -# CONFIG_INTEL_IOATDMA is not set CONFIG_INTEL_IOP_ADMA=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y # # File systems @@ -1105,7 +1153,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1145,7 +1192,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1162,10 +1208,12 @@ CONFIG_ECRYPT_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y @@ -1174,10 +1222,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1224,26 +1269,17 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1270,10 +1306,13 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y # CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -1285,6 +1324,7 @@ CONFIG_DEBUG_LL=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y @@ -1309,6 +1349,7 @@ CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=y +# CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1323,11 +1364,13 @@ CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_ANUBIS=y +# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_HW=y # diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index 721ee64a13f7..917afb5ccfac 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22 -# Thu Jul 19 16:05:59 2007 +# Linux kernel version: 2.6.24-rc5 +# Wed Dec 12 16:11:27 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -45,9 +41,14 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -69,7 +70,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -130,6 +130,7 @@ CONFIG_ARCH_IOP33X=y # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -150,6 +151,14 @@ CONFIG_IOP3XX_ATU=y # CONFIG_ARCH_IQ80331=y CONFIG_MACH_IQ80332=y + +# +# Boot options +# + +# +# Power management +# CONFIG_PLAT_IOP=y # @@ -179,11 +188,8 @@ CONFIG_XSCALE_PMU=y CONFIG_PCI=y CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -202,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -241,6 +248,7 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -279,6 +287,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -318,10 +327,6 @@ CONFIG_IPV6=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -350,6 +355,7 @@ CONFIG_IPV6=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -379,6 +385,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -419,6 +426,7 @@ CONFIG_MTD_PHYSMAP_START=0x0 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -459,6 +467,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_IDE is not set # @@ -496,12 +509,9 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -512,6 +522,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -552,14 +563,8 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -574,6 +579,8 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y @@ -582,6 +589,7 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -589,6 +597,7 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -597,11 +606,14 @@ CONFIG_E1000_NAPI=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # @@ -636,7 +648,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -685,12 +696,10 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -755,9 +764,9 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -765,12 +774,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -784,14 +794,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -803,29 +816,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set +# CONFIG_WATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices @@ -837,14 +839,16 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -859,6 +863,7 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -874,16 +879,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# Real Time Clock -# +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +CONFIG_DMADEVICES=y # -# DMA Engine support +# DMA Devices # +CONFIG_INTEL_IOP_ADMA=y CONFIG_DMA_ENGINE=y # @@ -892,12 +896,6 @@ CONFIG_DMA_ENGINE=y CONFIG_NET_DMA=y # -# DMA Devices -# -# CONFIG_INTEL_IOATDMA is not set -CONFIG_INTEL_IOP_ADMA=y - -# # File systems # CONFIG_EXT2_FS=y @@ -909,7 +907,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -949,7 +946,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -969,10 +965,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1019,26 +1012,17 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1065,10 +1049,13 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y # CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -1079,6 +1066,7 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y diff --git a/arch/arm/configs/littleton_defconfig b/arch/arm/configs/littleton_defconfig new file mode 100644 index 000000000000..1db496908052 --- /dev/null +++ b/arch/arm/configs/littleton_defconfig @@ -0,0 +1,783 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc5 +# Fri Dec 21 11:06:19 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# + +# +# Supported PXA3xx Processor Variants +# +CONFIG_CPU_PXA300=y +CONFIG_CPU_PXA310=y +# CONFIG_CPU_PXA320 is not set +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_ZYLONITE is not set +CONFIG_MACH_LITTLETON=y +# CONFIG_MACH_ARMCORE is not set +CONFIG_PXA3xx=y +CONFIG_PXA_SSP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSC3=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_IO_36=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig new file mode 100644 index 000000000000..ae4c5e62086a --- /dev/null +++ b/arch/arm/configs/msm_defconfig @@ -0,0 +1,895 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23 +# Wed Nov 7 01:36:45 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_GPIOS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_PANIC_TIMEOUT=0 +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_GOLDFISH is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +CONFIG_ARCH_MSM7X00A=y + +# +# Boot options +# + +# +# Power management +# + +# +# MSM7200 Board Type +# +CONFIG_MACH_HALIBUT=y +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +# CONFIG_SERIAL_MSM_NOINIT is not set +CONFIG_MSM_SMD=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set +CONFIG_MTD_MSM_NAND=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_GOLDFISH_NAND is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +CONFIG_MSM_RMNET=y +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_MEP is not set +CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set +CONFIG_INPUT_GPIO=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DCC_TTY=y +# CONFIG_GOLDFISH_TTY is not set +CONFIG_BINDER=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_MSM=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +CONFIG_SENSORS_PCA9633=y +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_SENSORS_AKM8976=y +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_LOW_MEMORY_KILLER=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_MSM=y +# CONFIG_FB_GOLDFISH is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# USB Function Support +# +CONFIG_USB_FUNCTION=y +CONFIG_USB_FUNCTION_MSM_HSUSB=y +# CONFIG_USB_FUNCTION_NULL is not set +# CONFIG_USB_FUNCTION_ZERO is not set +# CONFIG_USB_FUNCTION_LOOPBACK is not set +CONFIG_USB_FUNCTION_ADB=y +# CONFIG_MMC is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Android +# +# CONFIG_ANDROID_GADGET is not set +# CONFIG_ANDROID_RAM_CONSOLE is not set +CONFIG_ANDROID_LOGGER=y +CONFIG_ANDROID_VIBRATOR=y + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/orion_defconfig b/arch/arm/configs/orion_defconfig new file mode 100644 index 000000000000..17a55def1103 --- /dev/null +++ b/arch/arm/configs/orion_defconfig @@ -0,0 +1,1384 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc3 +# Wed Nov 28 15:13:57 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +CONFIG_ARCH_ORION=y +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Orion Implementations +# +CONFIG_MACH_DB88F5281=y +CONFIG_MACH_RD88F5182=y +CONFIG_MACH_KUROBOX_PRO=y +CONFIG_MACH_DNS323=y +CONFIG_MACH_TS209=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_FEROCEON=y +CONFIG_CPU_FEROCEON_OLD_ID=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_SYSCALL=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_FTL=y +CONFIG_NFTL=y +# CONFIG_NFTL_RW is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI_I4=y +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_ORION=y +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +CONFIG_SCSI_MVSATA=y + +# +# Sata options +# +# CONFIG_MV_SATA_SUPPORT_ATAPI is not set +# CONFIG_MV_SATA_ENABLE_1MB_IOS is not set +CONFIG_SATA_NO_DEBUG=y +# CONFIG_SATA_DEBUG_ON_ERROR is not set +# CONFIG_SATA_FULL_DEBUG is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +CONFIG_SKGE=y +CONFIG_SKY2=y +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +CONFIG_MV643XX_ETH=y +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +CONFIG_I2C_MV64XXX=y + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_SL811_HCD=y +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +# CONFIG_USB_STORAGE_ISD200 is not set +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +CONFIG_RTC_DRV_M41T80=y +# CONFIG_RTC_DRV_M41T80_WDT is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_LDM_PARTITION=y +CONFIG_LDM_DEBUG=y +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig new file mode 100644 index 000000000000..17b9b2469570 --- /dev/null +++ b/arch/arm/configs/pcm027_defconfig @@ -0,0 +1,1096 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Fri Dec 21 10:52:09 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_ARMCORE is not set +CONFIG_MACH_PCM027=y +CONFIG_MACH_PCM990_BASEBOARD=y +CONFIG_PXA27x=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PXA2XX is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=y +CONFIG_SND_PXA2XX_AC97=y + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=m +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=m + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +CONFIG_FS_MBCACHE=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-15" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 593b56509f4f..faa761921153 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c index 0a3e9ad297d8..2f080a35a2d9 100644 --- a/arch/arm/kernel/dma-isa.c +++ b/arch/arm/kernel/dma-isa.c @@ -216,7 +216,7 @@ void __init isa_init_dma(dma_t *dma) request_dma(DMA_ISA_CASCADE, "cascade"); - for (i = 0; i < sizeof(dma_resources) / sizeof(dma_resources[0]); i++) + for (i = 0; i < ARRAY_SIZE(dma_resources); i++) request_resource(&ioport_resource, dma_resources + i); } } diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 29dec080a604..a46d5b456765 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -11,8 +11,8 @@ * * Low-level vector interface routines * - * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction that causes - * it to save wrong values... Be aware! + * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction + * that causes it to save wrong values... Be aware! */ #include <asm/memory.h> @@ -58,6 +58,12 @@ .endm +#ifdef CONFIG_KPROBES + .section .kprobes.text,"ax",%progbits +#else + .text +#endif + /* * Invalid mode handlers */ @@ -112,8 +118,8 @@ common_invalid: #define SPFIX(code...) #endif - .macro svc_entry - sub sp, sp, #S_FRAME_SIZE + .macro svc_entry, stack_hole=0 + sub sp, sp, #(S_FRAME_SIZE + \stack_hole) SPFIX( tst sp, #4 ) SPFIX( bicne sp, sp, #4 ) stmib sp, {r1 - r12} @@ -121,7 +127,7 @@ common_invalid: ldmia r0, {r1 - r3} add r5, sp, #S_SP @ here for interlock avoidance mov r4, #-1 @ "" "" "" "" - add r0, sp, #S_FRAME_SIZE @ "" "" "" "" + add r0, sp, #(S_FRAME_SIZE + \stack_hole) SPFIX( addne r0, r0, #4 ) str r1, [sp] @ save the "real" r0 copied @ from the exception stack @@ -242,7 +248,14 @@ svc_preempt: .align 5 __und_svc: +#ifdef CONFIG_KPROBES + @ If a kprobe is about to simulate a "stmdb sp..." instruction, + @ it obviously needs free stack space which then will belong to + @ the saved context. + svc_entry 64 +#else svc_entry +#endif @ @ call emulation code, which returns using r9 if it has emulated @@ -480,6 +493,13 @@ __und_usr: * co-processor instructions. However, we have to watch out * for the ARM6/ARM7 SWI bug. * + * NEON is a special case that has to be handled here. Not all + * NEON instructions are co-processor instructions, so we have + * to make a special case of checking for them. Plus, there's + * five groups of them, so we have a table of mask/opcode pairs + * to check against, and if any match then we branch off into the + * NEON handler code. + * * Emulators may wish to make use of the following registers: * r0 = instruction opcode. * r2 = PC+4 @@ -488,6 +508,23 @@ __und_usr: * lr = unrecognised instruction return address */ call_fpe: +#ifdef CONFIG_NEON + adr r6, .LCneon_opcodes +2: + ldr r7, [r6], #4 @ mask value + cmp r7, #0 @ end mask? + beq 1f + and r8, r0, r7 + ldr r7, [r6], #4 @ opcode bits matching in mask + cmp r8, r7 @ NEON instruction? + bne 2b + get_thread_info r10 + mov r7, #1 + strb r7, [r10, #TI_USED_CP + 10] @ mark CP#10 as used + strb r7, [r10, #TI_USED_CP + 11] @ mark CP#11 as used + b do_vfp @ let VFP handler handle this +1: +#endif tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27 #if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710) and r8, r0, #0x0f000000 @ mask out op-code bits @@ -537,6 +574,20 @@ call_fpe: mov pc, lr @ CP#14 (Debug) mov pc, lr @ CP#15 (Control) +#ifdef CONFIG_NEON + .align 6 + +.LCneon_opcodes: + .word 0xfe000000 @ mask + .word 0xf2000000 @ opcode + + .word 0xff100000 @ mask + .word 0xf4000000 @ opcode + + .word 0x00000000 @ mask + .word 0x00000000 @ opcode +#endif + do_fpe: enable_irq ldr r4, .LCfp @@ -555,7 +606,7 @@ do_fpe: .data ENTRY(fp_enter) .word no_fp - .text + .previous no_fp: mov pc, lr diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 33e6cc2ffd3b..6c90c50a9ee3 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -72,7 +72,7 @@ no_work_pending: ldr r1, [sp, #S_PSR] @ get calling cpsr ldr lr, [sp, #S_PC]! @ get pc msr spsr_cxsf, r1 @ save in spsr_svc - ldmdb sp, {r0 - lr}^ @ get calling r1 - lr + ldmdb sp, {r0 - lr}^ @ get calling r0 - lr mov r0, r0 add sp, sp, #S_FRAME_SIZE - S_PC movs pc, lr @ return & move spsr_svc into cpsr diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c new file mode 100644 index 000000000000..d51bc8b60557 --- /dev/null +++ b/arch/arm/kernel/kprobes-decode.c @@ -0,0 +1,1529 @@ +/* + * arch/arm/kernel/kprobes-decode.c + * + * Copyright (C) 2006, 2007 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +/* + * We do not have hardware single-stepping on ARM, This + * effort is further complicated by the ARM not having a + * "next PC" register. Instructions that change the PC + * can't be safely single-stepped in a MP environment, so + * we have a lot of work to do: + * + * In the prepare phase: + * *) If it is an instruction that does anything + * with the CPU mode, we reject it for a kprobe. + * (This is out of laziness rather than need. The + * instructions could be simulated.) + * + * *) Otherwise, decode the instruction rewriting its + * registers to take fixed, ordered registers and + * setting a handler for it to run the instruction. + * + * In the execution phase by an instruction's handler: + * + * *) If the PC is written to by the instruction, the + * instruction must be fully simulated in software. + * If it is a conditional instruction, the handler + * will use insn[0] to copy its condition code to + * set r0 to 1 and insn[1] to "mov pc, lr" to return. + * + * *) Otherwise, a modified form of the instruction is + * directly executed. Its handler calls the + * instruction in insn[0]. In insn[1] is a + * "mov pc, lr" to return. + * + * Before calling, load up the reordered registers + * from the original instruction's registers. If one + * of the original input registers is the PC, compute + * and adjust the appropriate input register. + * + * After call completes, copy the output registers to + * the original instruction's original registers. + * + * We don't use a real breakpoint instruction since that + * would have us in the kernel go from SVC mode to SVC + * mode losing the link register. Instead we use an + * undefined instruction. To simplify processing, the + * undefined instruction used for kprobes must be reserved + * exclusively for kprobes use. + * + * TODO: ifdef out some instruction decoding based on architecture. + */ + +#include <linux/kernel.h> +#include <linux/kprobes.h> + +#define sign_extend(x, signbit) ((x) | (0 - ((x) & (1 << (signbit))))) + +#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25) + +#define PSR_fs (PSR_f|PSR_s) + +#define KPROBE_RETURN_INSTRUCTION 0xe1a0f00e /* mov pc, lr */ +#define SET_R0_TRUE_INSTRUCTION 0xe3a00001 /* mov r0, #1 */ + +#define truecc_insn(insn) (((insn) & 0xf0000000) | \ + (SET_R0_TRUE_INSTRUCTION & 0x0fffffff)) + +typedef long (insn_0arg_fn_t)(void); +typedef long (insn_1arg_fn_t)(long); +typedef long (insn_2arg_fn_t)(long, long); +typedef long (insn_3arg_fn_t)(long, long, long); +typedef long (insn_4arg_fn_t)(long, long, long, long); +typedef long long (insn_llret_0arg_fn_t)(void); +typedef long long (insn_llret_3arg_fn_t)(long, long, long); +typedef long long (insn_llret_4arg_fn_t)(long, long, long, long); + +union reg_pair { + long long dr; +#ifdef __LITTLE_ENDIAN + struct { long r0, r1; }; +#else + struct { long r1, r0; }; +#endif +}; + +/* + * For STR and STM instructions, an ARM core may choose to use either + * a +8 or a +12 displacement from the current instruction's address. + * Whichever value is chosen for a given core, it must be the same for + * both instructions and may not change. This function measures it. + */ + +static int str_pc_offset; + +static void __init find_str_pc_offset(void) +{ + int addr, scratch, ret; + + __asm__ ( + "sub %[ret], pc, #4 \n\t" + "str pc, %[addr] \n\t" + "ldr %[scr], %[addr] \n\t" + "sub %[ret], %[scr], %[ret] \n\t" + : [ret] "=r" (ret), [scr] "=r" (scratch), [addr] "+m" (addr)); + + str_pc_offset = ret; +} + +/* + * The insnslot_?arg_r[w]flags() functions below are to keep the + * msr -> *fn -> mrs instruction sequences indivisible so that + * the state of the CPSR flags aren't inadvertently modified + * just before or just after the call. + */ + +static inline long __kprobes +insnslot_0arg_rflags(long cpsr, insn_0arg_fn_t *fn) +{ + register long ret asm("r0"); + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret) + : [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + return ret; +} + +static inline long long __kprobes +insnslot_llret_0arg_rflags(long cpsr, insn_llret_0arg_fn_t *fn) +{ + register long ret0 asm("r0"); + register long ret1 asm("r1"); + union reg_pair fnr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret0), "=r" (ret1) + : [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + fnr.r0 = ret0; + fnr.r1 = ret1; + return fnr.dr; +} + +static inline long __kprobes +insnslot_1arg_rflags(long r0, long cpsr, insn_1arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long ret asm("r0"); + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret) + : "0" (rr0), [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + return ret; +} + +static inline long __kprobes +insnslot_2arg_rflags(long r0, long r1, long cpsr, insn_2arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long ret asm("r0"); + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret) + : "0" (rr0), "r" (rr1), + [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + return ret; +} + +static inline long __kprobes +insnslot_3arg_rflags(long r0, long r1, long r2, long cpsr, insn_3arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long rr2 asm("r2") = r2; + register long ret asm("r0"); + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret) + : "0" (rr0), "r" (rr1), "r" (rr2), + [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + return ret; +} + +static inline long long __kprobes +insnslot_llret_3arg_rflags(long r0, long r1, long r2, long cpsr, + insn_llret_3arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long rr2 asm("r2") = r2; + register long ret0 asm("r0"); + register long ret1 asm("r1"); + union reg_pair fnr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret0), "=r" (ret1) + : "0" (rr0), "r" (rr1), "r" (rr2), + [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + fnr.r0 = ret0; + fnr.r1 = ret1; + return fnr.dr; +} + +static inline long __kprobes +insnslot_4arg_rflags(long r0, long r1, long r2, long r3, long cpsr, + insn_4arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long rr2 asm("r2") = r2; + register long rr3 asm("r3") = r3; + register long ret asm("r0"); + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + : "=r" (ret) + : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3), + [cpsr] "r" (cpsr), [fn] "r" (fn) + : "lr", "cc" + ); + return ret; +} + +static inline long __kprobes +insnslot_1arg_rwflags(long r0, long *cpsr, insn_1arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long ret asm("r0"); + long oldcpsr = *cpsr; + long newcpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[oldcpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + "mrs %[newcpsr], cpsr \n\t" + : "=r" (ret), [newcpsr] "=r" (newcpsr) + : "0" (rr0), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) + : "lr", "cc" + ); + *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); + return ret; +} + +static inline long __kprobes +insnslot_2arg_rwflags(long r0, long r1, long *cpsr, insn_2arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long ret asm("r0"); + long oldcpsr = *cpsr; + long newcpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[oldcpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + "mrs %[newcpsr], cpsr \n\t" + : "=r" (ret), [newcpsr] "=r" (newcpsr) + : "0" (rr0), "r" (rr1), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) + : "lr", "cc" + ); + *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); + return ret; +} + +static inline long __kprobes +insnslot_3arg_rwflags(long r0, long r1, long r2, long *cpsr, + insn_3arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long rr2 asm("r2") = r2; + register long ret asm("r0"); + long oldcpsr = *cpsr; + long newcpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[oldcpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + "mrs %[newcpsr], cpsr \n\t" + : "=r" (ret), [newcpsr] "=r" (newcpsr) + : "0" (rr0), "r" (rr1), "r" (rr2), + [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) + : "lr", "cc" + ); + *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); + return ret; +} + +static inline long __kprobes +insnslot_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr, + insn_4arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long rr2 asm("r2") = r2; + register long rr3 asm("r3") = r3; + register long ret asm("r0"); + long oldcpsr = *cpsr; + long newcpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[oldcpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + "mrs %[newcpsr], cpsr \n\t" + : "=r" (ret), [newcpsr] "=r" (newcpsr) + : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3), + [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) + : "lr", "cc" + ); + *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); + return ret; +} + +static inline long long __kprobes +insnslot_llret_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr, + insn_llret_4arg_fn_t *fn) +{ + register long rr0 asm("r0") = r0; + register long rr1 asm("r1") = r1; + register long rr2 asm("r2") = r2; + register long rr3 asm("r3") = r3; + register long ret0 asm("r0"); + register long ret1 asm("r1"); + long oldcpsr = *cpsr; + long newcpsr; + union reg_pair fnr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[oldcpsr] \n\t" + "mov lr, pc \n\t" + "mov pc, %[fn] \n\t" + "mrs %[newcpsr], cpsr \n\t" + : "=r" (ret0), "=r" (ret1), [newcpsr] "=r" (newcpsr) + : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3), + [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) + : "lr", "cc" + ); + *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); + fnr.r0 = ret0; + fnr.r1 = ret1; + return fnr.dr; +} + +/* + * To avoid the complications of mimicing single-stepping on a + * processor without a Next-PC or a single-step mode, and to + * avoid having to deal with the side-effects of boosting, we + * simulate or emulate (almost) all ARM instructions. + * + * "Simulation" is where the instruction's behavior is duplicated in + * C code. "Emulation" is where the original instruction is rewritten + * and executed, often by altering its registers. + * + * By having all behavior of the kprobe'd instruction completed before + * returning from the kprobe_handler(), all locks (scheduler and + * interrupt) can safely be released. There is no need for secondary + * breakpoints, no race with MP or preemptable kernels, nor having to + * clean up resources counts at a later time impacting overall system + * performance. By rewriting the instruction, only the minimum registers + * need to be loaded and saved back optimizing performance. + * + * Calling the insnslot_*_rwflags version of a function doesn't hurt + * anything even when the CPSR flags aren't updated by the + * instruction. It's just a little slower in return for saving + * a little space by not having a duplicate function that doesn't + * update the flags. (The same optimization can be said for + * instructions that do or don't perform register writeback) + * Also, instructions can either read the flags, only write the + * flags, or read and write the flags. To save combinations + * rather than for sheer performance, flag functions just assume + * read and write of flags. + */ + +static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + long iaddr = (long)p->addr; + int disp = branch_displacement(insn); + + if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) + return; + + if (insn & (1 << 24)) + regs->ARM_lr = iaddr + 4; + + regs->ARM_pc = iaddr + 8 + disp; +} + +static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + long iaddr = (long)p->addr; + int disp = branch_displacement(insn); + + regs->ARM_lr = iaddr + 4; + regs->ARM_pc = iaddr + 8 + disp + ((insn >> 23) & 0x2); + regs->ARM_cpsr |= PSR_T_BIT; +} + +static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rm = insn & 0xf; + long rmv = regs->uregs[rm]; + + if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) + return; + + if (insn & (1 << 5)) + regs->ARM_lr = (long)p->addr + 4; + + regs->ARM_pc = rmv & ~0x1; + regs->ARM_cpsr &= ~PSR_T_BIT; + if (rmv & 0x1) + regs->ARM_cpsr |= PSR_T_BIT; +} + +static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rn = (insn >> 16) & 0xf; + int lbit = insn & (1 << 20); + int wbit = insn & (1 << 21); + int ubit = insn & (1 << 23); + int pbit = insn & (1 << 24); + long *addr = (long *)regs->uregs[rn]; + int reg_bit_vector; + int reg_count; + + if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) + return; + + reg_count = 0; + reg_bit_vector = insn & 0xffff; + while (reg_bit_vector) { + reg_bit_vector &= (reg_bit_vector - 1); + ++reg_count; + } + + if (!ubit) + addr -= reg_count; + addr += (!pbit ^ !ubit); + + reg_bit_vector = insn & 0xffff; + while (reg_bit_vector) { + int reg = __ffs(reg_bit_vector); + reg_bit_vector &= (reg_bit_vector - 1); + if (lbit) + regs->uregs[reg] = *addr++; + else + *addr++ = regs->uregs[reg]; + } + + if (wbit) { + if (!ubit) + addr -= reg_count; + addr -= (!pbit ^ !ubit); + regs->uregs[rn] = (long)addr; + } +} + +static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + + if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) + return; + + regs->ARM_pc = (long)p->addr + str_pc_offset; + simulate_ldm1stm1(p, regs); + regs->ARM_pc = (long)p->addr + 4; +} + +static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs) +{ + regs->uregs[12] = regs->uregs[13]; +} + +static void __kprobes emulate_ldcstc(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rn = (insn >> 16) & 0xf; + long rnv = regs->uregs[rn]; + + /* Save Rn in case of writeback. */ + regs->uregs[rn] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs) +{ + insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; /* rm may be invalid, don't care. */ + + /* Not following the C calling convention here, so need asm(). */ + __asm__ __volatile__ ( + "ldr r0, %[rn] \n\t" + "ldr r1, %[rm] \n\t" + "msr cpsr_fs, %[cpsr]\n\t" + "mov lr, pc \n\t" + "mov pc, %[i_fn] \n\t" + "str r0, %[rn] \n\t" /* in case of writeback */ + "str r2, %[rd0] \n\t" + "str r3, %[rd1] \n\t" + : [rn] "+m" (regs->uregs[rn]), + [rd0] "=m" (regs->uregs[rd]), + [rd1] "=m" (regs->uregs[rd+1]) + : [rm] "m" (regs->uregs[rm]), + [cpsr] "r" (regs->ARM_cpsr), + [i_fn] "r" (i_fn) + : "r0", "r1", "r2", "r3", "lr", "cc" + ); +} + +static void __kprobes emulate_strd(struct kprobe *p, struct pt_regs *regs) +{ + insn_4arg_fn_t *i_fn = (insn_4arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + long rnv = regs->uregs[rn]; + long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */ + + regs->uregs[rn] = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd], + regs->uregs[rd+1], + regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs) +{ + insn_llret_3arg_fn_t *i_fn = (insn_llret_3arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + union reg_pair fnr; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + long rdv; + long rnv = regs->uregs[rn]; + long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */ + long cpsr = regs->ARM_cpsr; + + fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn); + regs->uregs[rn] = fnr.r0; /* Save Rn in case of writeback. */ + rdv = fnr.r1; + + if (rd == 15) { +#if __LINUX_ARM_ARCH__ >= 5 + cpsr &= ~PSR_T_BIT; + if (rdv & 0x1) + cpsr |= PSR_T_BIT; + regs->ARM_cpsr = cpsr; + rdv &= ~0x1; +#else + rdv &= ~0x2; +#endif + } + regs->uregs[rd] = rdv; +} + +static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs) +{ + insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + long iaddr = (long)p->addr; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + long rdv = (rd == 15) ? iaddr + str_pc_offset : regs->uregs[rd]; + long rnv = (rn == 15) ? iaddr + 8 : regs->uregs[rn]; + long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */ + + /* Save Rn in case of writeback. */ + regs->uregs[rn] = + insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs) +{ + insn_llret_0arg_fn_t *i_fn = (insn_llret_0arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + union reg_pair fnr; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + + fnr.dr = insnslot_llret_0arg_rflags(regs->ARM_cpsr, i_fn); + regs->uregs[rn] = fnr.r0; + regs->uregs[rd] = fnr.r1; +} + +static void __kprobes emulate_mcrr(struct kprobe *p, struct pt_regs *regs) +{ + insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + long rnv = regs->uregs[rn]; + long rdv = regs->uregs[rd]; + + insnslot_2arg_rflags(rnv, rdv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_sat(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rm = insn & 0xf; + long rmv = regs->uregs[rm]; + + /* Writes Q flag */ + regs->uregs[rd] = insnslot_1arg_rwflags(rmv, ®s->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_sel(struct kprobe *p, struct pt_regs *regs) +{ + insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + long rnv = regs->uregs[rn]; + long rmv = regs->uregs[rm]; + + /* Reads GE bits */ + regs->uregs[rd] = insnslot_2arg_rflags(rnv, rmv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_none(struct kprobe *p, struct pt_regs *regs) +{ + insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0]; + + insnslot_0arg_rflags(regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_rd12(struct kprobe *p, struct pt_regs *regs) +{ + insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + + regs->uregs[rd] = insnslot_0arg_rflags(regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_ird12(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int ird = (insn >> 12) & 0xf; + + insnslot_1arg_rflags(regs->uregs[ird], regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_rn16(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rn = (insn >> 16) & 0xf; + long rnv = regs->uregs[rn]; + + insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_rd12rm0(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rm = insn & 0xf; + long rmv = regs->uregs[rm]; + + regs->uregs[rd] = insnslot_1arg_rflags(rmv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_rd12rn16rm0_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + long rnv = regs->uregs[rn]; + long rmv = regs->uregs[rm]; + + regs->uregs[rd] = + insnslot_2arg_rwflags(rnv, rmv, ®s->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_rd16rn12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 16) & 0xf; + int rn = (insn >> 12) & 0xf; + int rs = (insn >> 8) & 0xf; + int rm = insn & 0xf; + long rnv = regs->uregs[rn]; + long rsv = regs->uregs[rs]; + long rmv = regs->uregs[rm]; + + regs->uregs[rd] = + insnslot_3arg_rwflags(rnv, rsv, rmv, ®s->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_rd16rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 16) & 0xf; + int rs = (insn >> 8) & 0xf; + int rm = insn & 0xf; + long rsv = regs->uregs[rs]; + long rmv = regs->uregs[rm]; + + regs->uregs[rd] = + insnslot_2arg_rwflags(rsv, rmv, ®s->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_rdhi16rdlo12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_llret_4arg_fn_t *i_fn = (insn_llret_4arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + union reg_pair fnr; + int rdhi = (insn >> 16) & 0xf; + int rdlo = (insn >> 12) & 0xf; + int rs = (insn >> 8) & 0xf; + int rm = insn & 0xf; + long rsv = regs->uregs[rs]; + long rmv = regs->uregs[rm]; + + fnr.dr = insnslot_llret_4arg_rwflags(regs->uregs[rdhi], + regs->uregs[rdlo], rsv, rmv, + ®s->ARM_cpsr, i_fn); + regs->uregs[rdhi] = fnr.r0; + regs->uregs[rdlo] = fnr.r1; +} + +static void __kprobes +emulate_alu_imm_rflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn]; + + regs->uregs[rd] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_alu_imm_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn]; + + regs->uregs[rd] = insnslot_1arg_rwflags(rnv, ®s->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_alu_rflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + long ppc = (long)p->addr + 8; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */ + int rs = (insn >> 8) & 0xf; /* invalid, don't care. */ + int rm = insn & 0xf; + long rnv = (rn == 15) ? ppc : regs->uregs[rn]; + long rmv = (rm == 15) ? ppc : regs->uregs[rm]; + long rsv = regs->uregs[rs]; + + regs->uregs[rd] = + insnslot_3arg_rflags(rnv, rmv, rsv, regs->ARM_cpsr, i_fn); +} + +static void __kprobes +emulate_alu_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + long ppc = (long)p->addr + 8; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */ + int rs = (insn >> 8) & 0xf; /* invalid, don't care. */ + int rm = insn & 0xf; + long rnv = (rn == 15) ? ppc : regs->uregs[rn]; + long rmv = (rm == 15) ? ppc : regs->uregs[rm]; + long rsv = regs->uregs[rs]; + + regs->uregs[rd] = + insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn); +} + +static enum kprobe_insn __kprobes +prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + int ibit = (insn & (1 << 26)) ? 25 : 22; + + insn &= 0xfff00fff; + insn |= 0x00001000; /* Rn = r0, Rd = r1 */ + if (insn & (1 << ibit)) { + insn &= ~0xf; + insn |= 2; /* Rm = r2 */ + } + asi->insn[0] = insn; + asi->insn_handler = (insn & (1 << 20)) ? emulate_ldr : emulate_str; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rd12rm0; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rd12(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + insn &= 0xffff0fff; /* Rd = r0 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rd12; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rd12rn16rm0_wflags(kprobe_opcode_t insn, + struct arch_specific_insn *asi) +{ + insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */ + insn |= 0x00000001; /* Rm = r1 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rd12rn16rm0_rwflags; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rd16rs8rm0_wflags(kprobe_opcode_t insn, + struct arch_specific_insn *asi) +{ + insn &= 0xfff0f0f0; /* Rd = r0, Rs = r0 */ + insn |= 0x00000001; /* Rm = r1 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rd16rs8rm0_rwflags; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rd16rn12rs8rm0_wflags(kprobe_opcode_t insn, + struct arch_specific_insn *asi) +{ + insn &= 0xfff000f0; /* Rd = r0, Rn = r0 */ + insn |= 0x00000102; /* Rs = r1, Rm = r2 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rd16rn12rs8rm0_rwflags; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn, + struct arch_specific_insn *asi) +{ + insn &= 0xfff000f0; /* RdHi = r0, RdLo = r1 */ + insn |= 0x00001203; /* Rs = r2, Rm = r3 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rdhi16rdlo12rs8rm0_rwflags; + return INSN_GOOD; +} + +/* + * For the instruction masking and comparisons in all the "space_*" + * functions below, Do _not_ rearrange the order of tests unless + * you're very, very sure of what you are doing. For the sake of + * efficiency, the masks for some tests sometimes assume other test + * have been done prior to them so the number of patterns to test + * for an instruction set can be as broad as possible to reduce the + * number of tests needed. + */ + +static enum kprobe_insn __kprobes +space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* CPS mmod == 1 : 1111 0001 0000 xx10 xxxx xxxx xx0x xxxx */ + /* RFE : 1111 100x x0x1 xxxx xxxx 1010 xxxx xxxx */ + /* SRS : 1111 100x x1x0 1101 xxxx 0101 xxxx xxxx */ + if ((insn & 0xfff30020) == 0xf1020000 || + (insn & 0xfe500f00) == 0xf8100a00 || + (insn & 0xfe5f0f00) == 0xf84d0500) + return INSN_REJECTED; + + /* PLD : 1111 01x1 x101 xxxx xxxx xxxx xxxx xxxx : */ + if ((insn & 0xfd700000) == 0xf4500000) { + insn &= 0xfff0ffff; /* Rn = r0 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rn16; + return INSN_GOOD; + } + + /* BLX(1) : 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx : */ + if ((insn & 0xfe000000) == 0xfa000000) { + asi->insn_handler = simulate_blx1; + return INSN_GOOD_NO_SLOT; + } + + /* SETEND : 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */ + /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ + if ((insn & 0xffff00f0) == 0xf1010000 || + (insn & 0xff000010) == 0xfe000000) { + asi->insn[0] = insn; + asi->insn_handler = emulate_none; + return INSN_GOOD; + } + + /* MCRR2 : 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */ + /* MRRC2 : 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */ + if ((insn & 0xffe00000) == 0xfc400000) { + insn &= 0xfff00fff; /* Rn = r0 */ + insn |= 0x00001000; /* Rd = r1 */ + asi->insn[0] = insn; + asi->insn_handler = + (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr; + return INSN_GOOD; + } + + /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ + /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ + if ((insn & 0xfe000000) == 0xfc000000) { + insn &= 0xfff0ffff; /* Rn = r0 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_ldcstc; + return INSN_GOOD; + } + + /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ + /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ + insn &= 0xffff0fff; /* Rd = r0 */ + asi->insn[0] = insn; + asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx xxx0 xxxx */ + if ((insn & 0x0f900010) == 0x01000000) { + + /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */ + /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */ + if ((insn & 0x0ff000f0) == 0x01200020 || + (insn & 0x0fb000f0) == 0x01200000) + return INSN_REJECTED; + + /* MRS : cccc 0001 0x00 xxxx xxxx xxxx 0000 xxxx */ + if ((insn & 0x0fb00010) == 0x01000000) + return prep_emulate_rd12(insn, asi); + + /* SMLALxy : cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */ + if ((insn & 0x0ff00090) == 0x01400080) + return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); + + /* SMULWy : cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */ + /* SMULxy : cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */ + if ((insn & 0x0ff000b0) == 0x012000a0 || + (insn & 0x0ff00090) == 0x01600080) + return prep_emulate_rd16rs8rm0_wflags(insn, asi); + + /* SMLAxy : cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx : Q */ + /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 0x00 xxxx : Q */ + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + + } + + /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx 0xx1 xxxx */ + else if ((insn & 0x0f900090) == 0x01000010) { + + /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ + if ((insn & 0xfff000f0) == 0xe1200070) + return INSN_REJECTED; + + /* BLX(2) : cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */ + /* BX : cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */ + if ((insn & 0x0ff000d0) == 0x01200010) { + asi->insn[0] = truecc_insn(insn); + asi->insn_handler = simulate_blx2bx; + return INSN_GOOD; + } + + /* CLZ : cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */ + if ((insn & 0x0ff000f0) == 0x01600010) + return prep_emulate_rd12rm0(insn, asi); + + /* QADD : cccc 0001 0000 xxxx xxxx xxxx 0101 xxxx :Q */ + /* QSUB : cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx :Q */ + /* QDADD : cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx :Q */ + /* QDSUB : cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx :Q */ + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + } + + /* cccc 0000 xxxx xxxx xxxx xxxx xxxx 1001 xxxx */ + else if ((insn & 0x0f000090) == 0x00000090) { + + /* MUL : cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx : */ + /* MULS : cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx :cc */ + /* MLA : cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx : */ + /* MLAS : cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx :cc */ + /* UMAAL : cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx : */ + /* UMULL : cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx : */ + /* UMULLS : cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx :cc */ + /* UMLAL : cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx : */ + /* UMLALS : cccc 0000 1011 xxxx xxxx xxxx 1001 xxxx :cc */ + /* SMULL : cccc 0000 1100 xxxx xxxx xxxx 1001 xxxx : */ + /* SMULLS : cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx :cc */ + /* SMLAL : cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx : */ + /* SMLALS : cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx :cc */ + if ((insn & 0x0fe000f0) == 0x00000090) { + return prep_emulate_rd16rs8rm0_wflags(insn, asi); + } else if ((insn & 0x0fe000f0) == 0x00200090) { + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + } else { + return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); + } + } + + /* cccc 000x xxxx xxxx xxxx xxxx xxxx 1xx1 xxxx */ + else if ((insn & 0x0e000090) == 0x00000090) { + + /* SWP : cccc 0001 0000 xxxx xxxx xxxx 1001 xxxx */ + /* SWPB : cccc 0001 0100 xxxx xxxx xxxx 1001 xxxx */ + /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */ + /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */ + /* STREX : cccc 0001 1000 xxxx xxxx xxxx 1001 xxxx */ + /* LDREX : cccc 0001 1001 xxxx xxxx xxxx 1001 xxxx */ + /* LDRH : cccc 000x xxx1 xxxx xxxx xxxx 1011 xxxx */ + /* STRH : cccc 000x xxx0 xxxx xxxx xxxx 1011 xxxx */ + /* LDRSB : cccc 000x xxx1 xxxx xxxx xxxx 1101 xxxx */ + /* LDRSH : cccc 000x xxx1 xxxx xxxx xxxx 1111 xxxx */ + if ((insn & 0x0fb000f0) == 0x01000090) { + /* SWP/SWPB */ + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + } else if ((insn & 0x0e1000d0) == 0x00000d0) { + /* STRD/LDRD */ + insn &= 0xfff00fff; + insn |= 0x00002000; /* Rn = r0, Rd = r2 */ + if (insn & (1 << 22)) { + /* I bit */ + insn &= ~0xf; + insn |= 1; /* Rm = r1 */ + } + asi->insn[0] = insn; + asi->insn_handler = + (insn & (1 << 5)) ? emulate_strd : emulate_ldrd; + return INSN_GOOD; + } + + return prep_emulate_ldr_str(insn, asi); + } + + /* cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx xxxx */ + + /* + * ALU op with S bit and Rd == 15 : + * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx + */ + if ((insn & 0x0e10f000) == 0x0010f000) + return INSN_REJECTED; + + /* + * "mov ip, sp" is the most common kprobe'd instruction by far. + * Check and optimize for it explicitly. + */ + if (insn == 0xe1a0c00d) { + asi->insn_handler = simulate_mov_ipsp; + return INSN_GOOD_NO_SLOT; + } + + /* + * Data processing: Immediate-shift / Register-shift + * ALU op : cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx + * CPY : cccc 0001 1010 xxxx xxxx 0000 0000 xxxx + * MOV : cccc 0001 101x xxxx xxxx xxxx xxxx xxxx + * *S (bit 20) updates condition codes + * ADC/SBC/RSC reads the C flag + */ + insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */ + insn |= 0x00000001; /* Rm = r1 */ + if (insn & 0x010) { + insn &= 0xfffff0ff; /* register shift */ + insn |= 0x00000200; /* Rs = r2 */ + } + asi->insn[0] = insn; + asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ + emulate_alu_rwflags : emulate_alu_rflags; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* + * MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx + * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx + * ALU op with S bit and Rd == 15 : + * cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx + */ + if ((insn & 0x0f900000) == 0x03200000 || /* MSR & Undef */ + (insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */ + return INSN_REJECTED; + + /* + * Data processing: 32-bit Immediate + * ALU op : cccc 001x xxxx xxxx xxxx xxxx xxxx xxxx + * MOV : cccc 0011 101x xxxx xxxx xxxx xxxx xxxx + * *S (bit 20) updates condition codes + * ADC/SBC/RSC reads the C flag + */ + insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */ + asi->insn[0] = insn; + asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ + emulate_alu_imm_rwflags : emulate_alu_imm_rflags; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* SEL : cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx GE: !!! */ + if ((insn & 0x0ff000f0) == 0x068000b0) { + insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */ + insn |= 0x00000001; /* Rm = r1 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_sel; + return INSN_GOOD; + } + + /* SSAT : cccc 0110 101x xxxx xxxx xxxx xx01 xxxx :Q */ + /* USAT : cccc 0110 111x xxxx xxxx xxxx xx01 xxxx :Q */ + /* SSAT16 : cccc 0110 1010 xxxx xxxx xxxx 0011 xxxx :Q */ + /* USAT16 : cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx :Q */ + if ((insn & 0x0fa00030) == 0x06a00010 || + (insn & 0x0fb000f0) == 0x06a00030) { + insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_sat; + return INSN_GOOD; + } + + /* REV : cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */ + /* REV16 : cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */ + /* REVSH : cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */ + if ((insn & 0x0ff00070) == 0x06b00030 || + (insn & 0x0ff000f0) == 0x06f000b0) + return prep_emulate_rd12rm0(insn, asi); + + /* SADD16 : cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx :GE */ + /* SADDSUBX : cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx :GE */ + /* SSUBADDX : cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx :GE */ + /* SSUB16 : cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx :GE */ + /* SADD8 : cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx :GE */ + /* SSUB8 : cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx :GE */ + /* QADD16 : cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx : */ + /* QADDSUBX : cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx : */ + /* QSUBADDX : cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx : */ + /* QSUB16 : cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx : */ + /* QADD8 : cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx : */ + /* QSUB8 : cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx : */ + /* SHADD16 : cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx : */ + /* SHADDSUBX : cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx : */ + /* SHSUBADDX : cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx : */ + /* SHSUB16 : cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx : */ + /* SHADD8 : cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx : */ + /* SHSUB8 : cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx : */ + /* UADD16 : cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx :GE */ + /* UADDSUBX : cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx :GE */ + /* USUBADDX : cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx :GE */ + /* USUB16 : cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx :GE */ + /* UADD8 : cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx :GE */ + /* USUB8 : cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx :GE */ + /* UQADD16 : cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx : */ + /* UQADDSUBX : cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx : */ + /* UQSUBADDX : cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx : */ + /* UQSUB16 : cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx : */ + /* UQADD8 : cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx : */ + /* UQSUB8 : cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx : */ + /* UHADD16 : cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx : */ + /* UHADDSUBX : cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx : */ + /* UHSUBADDX : cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx : */ + /* UHSUB16 : cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx : */ + /* UHADD8 : cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx : */ + /* UHSUB8 : cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx : */ + /* PKHBT : cccc 0110 1000 xxxx xxxx xxxx x001 xxxx : */ + /* PKHTB : cccc 0110 1000 xxxx xxxx xxxx x101 xxxx : */ + /* SXTAB16 : cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTAB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTAH : cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx : */ + /* UXTAB16 : cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx : */ + /* UXTAB : cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx : */ + /* UXTAH : cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx : */ + return prep_emulate_rd12rn16rm0_wflags(insn, asi); +} + +static enum kprobe_insn __kprobes +space_cccc_0111__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* Undef : cccc 0111 1111 xxxx xxxx xxxx 1111 xxxx */ + if ((insn & 0x0ff000f0) == 0x03f000f0) + return INSN_REJECTED; + + /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */ + /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */ + if ((insn & 0x0ff000f0) == 0x07800010) + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + + /* SMLALD : cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */ + /* SMLSLD : cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */ + if ((insn & 0x0ff00090) == 0x07400010) + return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); + + /* SMLAD : cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx :Q */ + /* SMLSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :Q */ + /* SMMLA : cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx : */ + /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */ + if ((insn & 0x0ff00090) == 0x07000010 || + (insn & 0x0ff000d0) == 0x07500010 || + (insn & 0x0ff000d0) == 0x075000d0) + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + + /* SMUSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx : */ + /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */ + /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */ + return prep_emulate_rd16rs8rm0_wflags(insn, asi); +} + +static enum kprobe_insn __kprobes +space_cccc_01xx(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* LDR : cccc 01xx x0x1 xxxx xxxx xxxx xxxx xxxx */ + /* LDRB : cccc 01xx x1x1 xxxx xxxx xxxx xxxx xxxx */ + /* LDRBT : cccc 01x0 x111 xxxx xxxx xxxx xxxx xxxx */ + /* LDRT : cccc 01x0 x011 xxxx xxxx xxxx xxxx xxxx */ + /* STR : cccc 01xx x0x0 xxxx xxxx xxxx xxxx xxxx */ + /* STRB : cccc 01xx x1x0 xxxx xxxx xxxx xxxx xxxx */ + /* STRBT : cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */ + /* STRT : cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */ + return prep_emulate_ldr_str(insn, asi); +} + +static enum kprobe_insn __kprobes +space_cccc_100x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* LDM(2) : cccc 100x x101 xxxx 0xxx xxxx xxxx xxxx */ + /* LDM(3) : cccc 100x x1x1 xxxx 1xxx xxxx xxxx xxxx */ + if ((insn & 0x0e708000) == 0x85000000 || + (insn & 0x0e508000) == 0x85010000) + return INSN_REJECTED; + + /* LDM(1) : cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */ + /* STM(1) : cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */ + asi->insn[0] = truecc_insn(insn); + asi->insn_handler = ((insn & 0x108000) == 0x008000) ? /* STM & R15 */ + simulate_stm1_pc : simulate_ldm1stm1; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_101x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* B : cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */ + /* BL : cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */ + asi->insn[0] = truecc_insn(insn); + asi->insn_handler = simulate_bbl; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_1100_010x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* MCRR : cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */ + /* MRRC : cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */ + insn &= 0xfff00fff; + insn |= 0x00001000; /* Rn = r0, Rd = r1 */ + asi->insn[0] = insn; + asi->insn_handler = (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_110x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ + /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ + insn &= 0xfff0ffff; /* Rn = r0 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_ldcstc; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ + /* SWI : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */ + if ((insn & 0xfff000f0) == 0xe1200070 || + (insn & 0x0f000000) == 0x0f000000) + return INSN_REJECTED; + + /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ + if ((insn & 0x0f000010) == 0x0e000000) { + asi->insn[0] = insn; + asi->insn_handler = emulate_none; + return INSN_GOOD; + } + + /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ + /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ + insn &= 0xffff0fff; /* Rd = r0 */ + asi->insn[0] = insn; + asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12; + return INSN_GOOD; +} + +/* Return: + * INSN_REJECTED If instruction is one not allowed to kprobe, + * INSN_GOOD If instruction is supported and uses instruction slot, + * INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot. + * + * For instructions we don't want to kprobe (INSN_REJECTED return result): + * These are generally ones that modify the processor state making + * them "hard" to simulate such as switches processor modes or + * make accesses in alternate modes. Any of these could be simulated + * if the work was put into it, but low return considering they + * should also be very rare. + */ +enum kprobe_insn __kprobes +arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + asi->insn[1] = KPROBE_RETURN_INSTRUCTION; + + if ((insn & 0xf0000000) == 0xf0000000) { + + return space_1111(insn, asi); + + } else if ((insn & 0x0e000000) == 0x00000000) { + + return space_cccc_000x(insn, asi); + + } else if ((insn & 0x0e000000) == 0x02000000) { + + return space_cccc_001x(insn, asi); + + } else if ((insn & 0x0f000010) == 0x06000010) { + + return space_cccc_0110__1(insn, asi); + + } else if ((insn & 0x0f000010) == 0x07000010) { + + return space_cccc_0111__1(insn, asi); + + } else if ((insn & 0x0c000000) == 0x04000000) { + + return space_cccc_01xx(insn, asi); + + } else if ((insn & 0x0e000000) == 0x08000000) { + + return space_cccc_100x(insn, asi); + + } else if ((insn & 0x0e000000) == 0x0a000000) { + + return space_cccc_101x(insn, asi); + + } else if ((insn & 0x0fe00000) == 0x0c400000) { + + return space_cccc_1100_010x(insn, asi); + + } else if ((insn & 0x0e000000) == 0x0c400000) { + + return space_cccc_110x(insn, asi); + + } + + return space_cccc_111x(insn, asi); +} + +void __init arm_kprobe_decode_init(void) +{ + find_str_pc_offset(); +} + + +/* + * All ARM instructions listed below. + * + * Instructions and their general purpose registers are given. + * If a particular register may not use R15, it is prefixed with a "!". + * If marked with a "*" means the value returned by reading R15 + * is implementation defined. + * + * ADC/ADD/AND/BIC/CMN/CMP/EOR/MOV/MVN/ORR/RSB/RSC/SBC/SUB/TEQ + * TST: Rd, Rn, Rm, !Rs + * BX: Rm + * BLX(2): !Rm + * BX: Rm (R15 legal, but discouraged) + * BXJ: !Rm, + * CLZ: !Rd, !Rm + * CPY: Rd, Rm + * LDC/2,STC/2 immediate offset & unindex: Rn + * LDC/2,STC/2 immediate pre/post-indexed: !Rn + * LDM(1/3): !Rn, register_list + * LDM(2): !Rn, !register_list + * LDR,STR,PLD immediate offset: Rd, Rn + * LDR,STR,PLD register offset: Rd, Rn, !Rm + * LDR,STR,PLD scaled register offset: Rd, !Rn, !Rm + * LDR,STR immediate pre/post-indexed: Rd, !Rn + * LDR,STR register pre/post-indexed: Rd, !Rn, !Rm + * LDR,STR scaled register pre/post-indexed: Rd, !Rn, !Rm + * LDRB,STRB immediate offset: !Rd, Rn + * LDRB,STRB register offset: !Rd, Rn, !Rm + * LDRB,STRB scaled register offset: !Rd, !Rn, !Rm + * LDRB,STRB immediate pre/post-indexed: !Rd, !Rn + * LDRB,STRB register pre/post-indexed: !Rd, !Rn, !Rm + * LDRB,STRB scaled register pre/post-indexed: !Rd, !Rn, !Rm + * LDRT,LDRBT,STRBT immediate pre/post-indexed: !Rd, !Rn + * LDRT,LDRBT,STRBT register pre/post-indexed: !Rd, !Rn, !Rm + * LDRT,LDRBT,STRBT scaled register pre/post-indexed: !Rd, !Rn, !Rm + * LDRH/SH/SB/D,STRH/SH/SB/D immediate offset: !Rd, Rn + * LDRH/SH/SB/D,STRH/SH/SB/D register offset: !Rd, Rn, !Rm + * LDRH/SH/SB/D,STRH/SH/SB/D immediate pre/post-indexed: !Rd, !Rn + * LDRH/SH/SB/D,STRH/SH/SB/D register pre/post-indexed: !Rd, !Rn, !Rm + * LDREX: !Rd, !Rn + * MCR/2: !Rd + * MCRR/2,MRRC/2: !Rd, !Rn + * MLA: !Rd, !Rn, !Rm, !Rs + * MOV: Rd + * MRC/2: !Rd (if Rd==15, only changes cond codes, not the register) + * MRS,MSR: !Rd + * MUL: !Rd, !Rm, !Rs + * PKH{BT,TB}: !Rd, !Rn, !Rm + * QDADD,[U]QADD/16/8/SUBX: !Rd, !Rm, !Rn + * QDSUB,[U]QSUB/16/8/ADDX: !Rd, !Rm, !Rn + * REV/16/SH: !Rd, !Rm + * RFE: !Rn + * {S,U}[H]ADD{16,8,SUBX},{S,U}[H]SUB{16,8,ADDX}: !Rd, !Rn, !Rm + * SEL: !Rd, !Rn, !Rm + * SMLA<x><y>,SMLA{D,W<y>},SMLSD,SMML{A,S}: !Rd, !Rn, !Rm, !Rs + * SMLAL<x><y>,SMLA{D,LD},SMLSLD,SMMULL,SMULW<y>: !RdHi, !RdLo, !Rm, !Rs + * SMMUL,SMUAD,SMUL<x><y>,SMUSD: !Rd, !Rm, !Rs + * SSAT/16: !Rd, !Rm + * STM(1/2): !Rn, register_list* (R15 in reg list not recommended) + * STRT immediate pre/post-indexed: Rd*, !Rn + * STRT register pre/post-indexed: Rd*, !Rn, !Rm + * STRT scaled register pre/post-indexed: Rd*, !Rn, !Rm + * STREX: !Rd, !Rn, !Rm + * SWP/B: !Rd, !Rn, !Rm + * {S,U}XTA{B,B16,H}: !Rd, !Rn, !Rm + * {S,U}XT{B,B16,H}: !Rd, !Rm + * UM{AA,LA,UL}L: !RdHi, !RdLo, !Rm, !Rs + * USA{D8,A8,T,T16}: !Rd, !Rm, !Rs + * + * May transfer control by writing R15 (possible mode changes or alternate + * mode accesses marked by "*"): + * ALU op (* with s-bit), B, BL, BKPT, BLX(1/2), BX, BXJ, CPS*, CPY, + * LDM(1), LDM(2/3)*, LDR, MOV, RFE*, SWI* + * + * Instructions that do not take general registers, nor transfer control: + * CDP/2, SETEND, SRS* + */ diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c new file mode 100644 index 000000000000..a22a98c43ca5 --- /dev/null +++ b/arch/arm/kernel/kprobes.c @@ -0,0 +1,447 @@ +/* + * arch/arm/kernel/kprobes.c + * + * Kprobes on ARM + * + * Abhishek Sagar <sagar.abhishek@gmail.com> + * Copyright (C) 2006, 2007 Motorola Inc. + * + * Nicolas Pitre <nico@marvell.com> + * Copyright (C) 2007 Marvell Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/kprobes.h> +#include <linux/module.h> +#include <linux/stringify.h> +#include <asm/traps.h> +#include <asm/cacheflush.h> + +#define MIN_STACK_SIZE(addr) \ + min((unsigned long)MAX_STACK_SIZE, \ + (unsigned long)current_thread_info() + THREAD_START_SP - (addr)) + +#define flush_insns(addr, cnt) \ + flush_icache_range((unsigned long)(addr), \ + (unsigned long)(addr) + \ + sizeof(kprobe_opcode_t) * (cnt)) + +/* Used as a marker in ARM_pc to note when we're in a jprobe. */ +#define JPROBE_MAGIC_ADDR 0xffffffff + +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + + +int __kprobes arch_prepare_kprobe(struct kprobe *p) +{ + kprobe_opcode_t insn; + kprobe_opcode_t tmp_insn[MAX_INSN_SIZE]; + unsigned long addr = (unsigned long)p->addr; + int is; + + if (addr & 0x3 || in_exception_text(addr)) + return -EINVAL; + + insn = *p->addr; + p->opcode = insn; + p->ainsn.insn = tmp_insn; + + switch (arm_kprobe_decode_insn(insn, &p->ainsn)) { + case INSN_REJECTED: /* not supported */ + return -EINVAL; + + case INSN_GOOD: /* instruction uses slot */ + p->ainsn.insn = get_insn_slot(); + if (!p->ainsn.insn) + return -ENOMEM; + for (is = 0; is < MAX_INSN_SIZE; ++is) + p->ainsn.insn[is] = tmp_insn[is]; + flush_insns(&p->ainsn.insn, MAX_INSN_SIZE); + break; + + case INSN_GOOD_NO_SLOT: /* instruction doesn't need insn slot */ + p->ainsn.insn = NULL; + break; + } + + return 0; +} + +void __kprobes arch_arm_kprobe(struct kprobe *p) +{ + *p->addr = KPROBE_BREAKPOINT_INSTRUCTION; + flush_insns(p->addr, 1); +} + +void __kprobes arch_disarm_kprobe(struct kprobe *p) +{ + *p->addr = p->opcode; + flush_insns(p->addr, 1); +} + +void __kprobes arch_remove_kprobe(struct kprobe *p) +{ + if (p->ainsn.insn) { + mutex_lock(&kprobe_mutex); + free_insn_slot(p->ainsn.insn, 0); + mutex_unlock(&kprobe_mutex); + p->ainsn.insn = NULL; + } +} + +static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; +} + +static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; +} + +static void __kprobes set_current_kprobe(struct kprobe *p) +{ + __get_cpu_var(current_kprobe) = p; +} + +static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + regs->ARM_pc += 4; + p->ainsn.insn_handler(p, regs); +} + +/* + * Called with IRQs disabled. IRQs must remain disabled from that point + * all the way until processing this kprobe is complete. The current + * kprobes implementation cannot process more than one nested level of + * kprobe, and that level is reserved for user kprobe handlers, so we can't + * risk encountering a new kprobe in an interrupt handler. + */ +void __kprobes kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *p, *cur; + struct kprobe_ctlblk *kcb; + kprobe_opcode_t *addr = (kprobe_opcode_t *)regs->ARM_pc; + + kcb = get_kprobe_ctlblk(); + cur = kprobe_running(); + p = get_kprobe(addr); + + if (p) { + if (cur) { + /* Kprobe is pending, so we're recursing. */ + switch (kcb->kprobe_status) { + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* A pre- or post-handler probe got us here. */ + kprobes_inc_nmissed_count(p); + save_previous_kprobe(kcb); + set_current_kprobe(p); + kcb->kprobe_status = KPROBE_REENTER; + singlestep(p, regs, kcb); + restore_previous_kprobe(kcb); + break; + default: + /* impossible cases */ + BUG(); + } + } else { + set_current_kprobe(p); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + + /* + * If we have no pre-handler or it returned 0, we + * continue with normal processing. If we have a + * pre-handler and it returned non-zero, it prepped + * for calling the break_handler below on re-entry, + * so get out doing nothing more here. + */ + if (!p->pre_handler || !p->pre_handler(p, regs)) { + kcb->kprobe_status = KPROBE_HIT_SS; + singlestep(p, regs, kcb); + if (p->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + p->post_handler(p, regs, 0); + } + reset_current_kprobe(); + } + } + } else if (cur) { + /* We probably hit a jprobe. Call its break handler. */ + if (cur->break_handler && cur->break_handler(cur, regs)) { + kcb->kprobe_status = KPROBE_HIT_SS; + singlestep(cur, regs, kcb); + if (cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); + } + } + reset_current_kprobe(); + } else { + /* + * The probe was removed and a race is in progress. + * There is nothing we can do about it. Let's restart + * the instruction. By the time we can restart, the + * real instruction will be there. + */ + } +} + +int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr) +{ + kprobe_handler(regs); + return 0; +} + +int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + switch (kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the PC to point back to the probe address + * and allow the page fault handler to continue as a + * normal page fault. + */ + regs->ARM_pc = (long)cur->addr; + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); + } else { + reset_current_kprobe(); + } + break; + + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accounting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, fsr)) + return 1; + break; + + default: + break; + } + + return 0; +} + +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) +{ + /* + * notify_die() is currently never called on ARM, + * so this callback is currently empty. + */ + return NOTIFY_DONE; +} + +/* + * When a retprobed function returns, trampoline_handler() is called, + * calling the kretprobe's handler. We construct a struct pt_regs to + * give a view of registers r0-r11 to the user return-handler. This is + * not a complete pt_regs structure, but that should be plenty sufficient + * for kretprobe handlers which should normally be interested in r0 only + * anyway. + */ +static void __attribute__((naked)) __kprobes kretprobe_trampoline(void) +{ + __asm__ __volatile__ ( + "stmdb sp!, {r0 - r11} \n\t" + "mov r0, sp \n\t" + "bl trampoline_handler \n\t" + "mov lr, r0 \n\t" + "ldmia sp!, {r0 - r11} \n\t" + "mov pc, lr \n\t" + : : : "memory"); +} + +/* Called from kretprobe_trampoline */ +static __used __kprobes void *trampoline_handler(struct pt_regs *regs) +{ + struct kretprobe_instance *ri = NULL; + struct hlist_head *head, empty_rp; + struct hlist_node *node, *tmp; + unsigned long flags, orig_ret_address = 0; + unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline; + + INIT_HLIST_HEAD(&empty_rp); + spin_lock_irqsave(&kretprobe_lock, flags); + head = kretprobe_inst_table_head(current); + + /* + * It is possible to have multiple instances associated with a given + * task either because multiple functions in the call path have + * a return probe installed on them, and/or more than one return + * probe was registered for a target function. + * + * We can handle this because: + * - instances are always inserted at the head of the list + * - when multiple return probes are registered for the same + * function, the first instance's ret_addr will point to the + * real return address, and all the rest will point to + * kretprobe_trampoline + */ + hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { + if (ri->task != current) + /* another task is sharing our hash bucket */ + continue; + + if (ri->rp && ri->rp->handler) { + __get_cpu_var(current_kprobe) = &ri->rp->kp; + get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE; + ri->rp->handler(ri, regs); + __get_cpu_var(current_kprobe) = NULL; + } + + orig_ret_address = (unsigned long)ri->ret_addr; + recycle_rp_inst(ri, &empty_rp); + + if (orig_ret_address != trampoline_address) + /* + * This is the real return address. Any other + * instances associated with this task are for + * other calls deeper on the call stack + */ + break; + } + + kretprobe_assert(ri, orig_ret_address, trampoline_address); + spin_unlock_irqrestore(&kretprobe_lock, flags); + + hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) { + hlist_del(&ri->hlist); + kfree(ri); + } + + return (void *)orig_ret_address; +} + +/* Called with kretprobe_lock held. */ +void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, + struct pt_regs *regs) +{ + ri->ret_addr = (kprobe_opcode_t *)regs->ARM_lr; + + /* Replace the return addr with trampoline addr. */ + regs->ARM_lr = (unsigned long)&kretprobe_trampoline; +} + +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct jprobe *jp = container_of(p, struct jprobe, kp); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + long sp_addr = regs->ARM_sp; + + kcb->jprobe_saved_regs = *regs; + memcpy(kcb->jprobes_stack, (void *)sp_addr, MIN_STACK_SIZE(sp_addr)); + regs->ARM_pc = (long)jp->entry; + regs->ARM_cpsr |= PSR_I_BIT; + preempt_disable(); + return 1; +} + +void __kprobes jprobe_return(void) +{ + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + __asm__ __volatile__ ( + /* + * Setup an empty pt_regs. Fill SP and PC fields as + * they're needed by longjmp_break_handler. + */ + "sub sp, %0, %1 \n\t" + "ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t" + "str %0, [sp, %2] \n\t" + "str r0, [sp, %3] \n\t" + "mov r0, sp \n\t" + "bl kprobe_handler \n\t" + + /* + * Return to the context saved by setjmp_pre_handler + * and restored by longjmp_break_handler. + */ + "ldr r0, [sp, %4] \n\t" + "msr cpsr_cxsf, r0 \n\t" + "ldmia sp, {r0 - pc} \n\t" + : + : "r" (kcb->jprobe_saved_regs.ARM_sp), + "I" (sizeof(struct pt_regs)), + "J" (offsetof(struct pt_regs, ARM_sp)), + "J" (offsetof(struct pt_regs, ARM_pc)), + "J" (offsetof(struct pt_regs, ARM_cpsr)) + : "memory", "cc"); +} + +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + long stack_addr = kcb->jprobe_saved_regs.ARM_sp; + long orig_sp = regs->ARM_sp; + struct jprobe *jp = container_of(p, struct jprobe, kp); + + if (regs->ARM_pc == JPROBE_MAGIC_ADDR) { + if (orig_sp != stack_addr) { + struct pt_regs *saved_regs = + (struct pt_regs *)kcb->jprobe_saved_regs.ARM_sp; + printk("current sp %lx does not match saved sp %lx\n", + orig_sp, stack_addr); + printk("Saved registers for jprobe %p\n", jp); + show_regs(saved_regs); + printk("Current registers\n"); + show_regs(regs); + BUG(); + } + *regs = kcb->jprobe_saved_regs; + memcpy((void *)stack_addr, kcb->jprobes_stack, + MIN_STACK_SIZE(stack_addr)); + preempt_enable_no_resched(); + return 1; + } + return 0; +} + +static struct undef_hook kprobes_break_hook = { + .instr_mask = 0xffffffff, + .instr_val = KPROBE_BREAKPOINT_INSTRUCTION, + .cpsr_mask = MODE_MASK, + .cpsr_val = SVC_MODE, + .fn = kprobe_trap_handler, +}; + +int __init arch_init_kprobes() +{ + arm_kprobe_decode_init(); + register_undef_hook(&kprobes_break_hook); + return 0; +} diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index e59b5b84168d..b5867eca1d0b 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -325,7 +325,9 @@ void timer_tick(void) profile_tick(CPU_PROFILING); do_leds(); do_set_rtc(); + write_seqlock(&xtime_lock); do_timer(1); + write_sequnlock(&xtime_lock); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); #endif diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index c34db4e868fa..5595fdd75e82 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -19,6 +19,7 @@ #include <linux/kallsyms.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/kprobes.h> #include <asm/atomic.h> #include <asm/cacheflush.h> @@ -46,15 +47,6 @@ __setup("user_debug=", user_debug_setup); static void dump_mem(const char *str, unsigned long bottom, unsigned long top); -static inline int in_exception_text(unsigned long ptr) -{ - extern char __exception_text_start[]; - extern char __exception_text_end[]; - - return ptr >= (unsigned long)&__exception_text_start && - ptr < (unsigned long)&__exception_text_end; -} - void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame) { #ifdef CONFIG_KALLSYMS @@ -322,6 +314,17 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) get_user(instr, (u32 __user *)pc); } +#ifdef CONFIG_KPROBES + /* + * It is possible to have recursive kprobes, so we can't call + * the kprobe trap handler with the undef_lock held. + */ + if (instr == KPROBE_BREAKPOINT_INSTRUCTION && !user_mode(regs)) { + kprobe_trap_handler(regs, instr); + return; + } +#endif + spin_lock_irqsave(&undef_lock, flags); list_for_each_entry(hook, &undef_hook, node) { if ((instr & hook->instr_mask) == hook->instr_val && diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 5ff5406666b4..30f732c7fdb5 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -94,6 +94,7 @@ SECTIONS TEXT_TEXT SCHED_TEXT LOCK_TEXT + KPROBES_TEXT #ifdef CONFIG_MMU *(.fixup) #endif diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index 0446ef2f5bd6..b016be2b0e35 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -130,13 +130,9 @@ static irqreturn_t aaec2000_timer_interrupt(int irq, void *dev_id) { /* TODO: Check timer accuracy */ - write_seqlock(&xtime_lock); - timer_tick(); TIMER1_CLEAR = 1; - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 05a9f8a1b45e..5b0422cdde76 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -22,6 +22,9 @@ config ARCH_AT91SAM9263 config ARCH_AT91SAM9RL bool "AT91SAM9RL" +config ARCH_AT91CAP9 + bool "AT91CAP9" + config ARCH_AT91X40 bool "AT91x40" @@ -178,6 +181,21 @@ endif # ---------------------------------------------------------- +if ARCH_AT91CAP9 + +comment "AT91CAP9 Board Type" + +config MACH_AT91CAP9ADK + bool "Atmel AT91CAP9A-DK Evaluation Kit" + depends on ARCH_AT91CAP9 + help + Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> + +endif + +# ---------------------------------------------------------- + if ARCH_AT91X40 comment "AT91X40 Board Type" @@ -198,13 +216,13 @@ comment "AT91 Board Options" config MTD_AT91_DATAFLASH_CARD bool "Enable DataFlash Card support" - depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) + depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK) help Enable support for the DataFlash card. config MTD_NAND_AT91_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" - depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK) + depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK) help On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). @@ -219,6 +237,22 @@ config AT91_PROGRAMMABLE_CLOCKS Select this if you need to program one or more of the PCK0..PCK3 programmable clock outputs. +config AT91_TIMER_HZ + int "Kernel HZ (jiffies per second)" + range 32 1024 + depends on ARCH_AT91 + default "128" if ARCH_AT91RM9200 + default "100" + help + On AT91rm9200 chips where you're using a system clock derived + from the 32768 Hz hardware clock, this tick rate should divide + it exactly: use a power-of-two value, such as 128 or 256, to + reduce timing errors caused by rounding. + + On AT91sam926x chips, or otherwise when using a higher precision + system clock (of at least several MHz), rounding is less of a + problem so it can be safer to use a decimal values like 100. + endmenu endif diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index a21f08c64ea6..bf5f293dccf8 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -8,7 +8,6 @@ obj-n := obj- := obj-$(CONFIG_AT91_PMC_UNIT) += clock.o -obj-$(CONFIG_PM) += pm.o # CPU-specific support obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o @@ -16,6 +15,7 @@ obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_d obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o +obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support @@ -29,7 +29,6 @@ obj-$(CONFIG_MACH_KB9200) += board-kb9202.o obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o -obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o @@ -43,19 +42,17 @@ obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o # AT91SAM9RL board-specific support obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o -# LEDs support -led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o -led-$(CONFIG_MACH_AT91RM9200EK) += leds.o -led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o -led-$(CONFIG_MACH_CSB337) += leds.o -led-$(CONFIG_MACH_CSB637) += leds.o -led-$(CONFIG_MACH_KB9200) += leds.o -led-$(CONFIG_MACH_KAFA) += leds.o -obj-$(CONFIG_LEDS) += $(led-y) +# AT91CAP9 board-specific support +obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o -# VGA support -#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o +# AT91X40 board-specific support +obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o +# Drivers +obj-y += leds.o + +# Power Management +obj-$(CONFIG_PM) += pm.o ifeq ($(CONFIG_PM_DEBUG),y) CFLAGS_pm.o += -DDEBUG diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index e667dcc7cd34..071a2506a69f 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -3,7 +3,12 @@ # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM +ifeq ($(CONFIG_ARCH_AT91CAP9),y) + zreladdr-y := 0x70008000 +params_phys-y := 0x70000100 +initrd_phys-y := 0x70410000 +else zreladdr-y := 0x20008000 params_phys-y := 0x20000100 initrd_phys-y := 0x20410000 - +endif diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c new file mode 100644 index 000000000000..48d27d8000b0 --- /dev/null +++ b/arch/arm/mach-at91/at91cap9.c @@ -0,0 +1,365 @@ +/* + * arch/arm/mach-at91/at91cap9.c + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2007 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/module.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/arch/at91cap9.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> + +#include "generic.h" +#include "clock.h" + +static struct map_desc at91cap9_io_desc[] __initdata = { + { + .virtual = AT91_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_BASE_SYS), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE, + .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE), + .length = AT91CAP9_SRAM_SIZE, + .type = MT_DEVICE, + }, +}; + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk pioABCD_clk = { + .name = "pioABCD_clk", + .pmc_mask = 1 << AT91CAP9_ID_PIOABCD, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb0_clk = { + .name = "mpb0_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb1_clk = { + .name = "mpb1_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb2_clk = { + .name = "mpb2_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb3_clk = { + .name = "mpb3_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb4_clk = { + .name = "mpb4_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB4, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91CAP9_ID_US0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91CAP9_ID_US1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91CAP9_ID_US2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc0_clk = { + .name = "mci0_clk", + .pmc_mask = 1 << AT91CAP9_ID_MCI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc1_clk = { + .name = "mci1_clk", + .pmc_mask = 1 << AT91CAP9_ID_MCI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk can_clk = { + .name = "can_clk", + .pmc_mask = 1 << AT91CAP9_ID_CAN, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi_clk = { + .name = "twi_clk", + .pmc_mask = 1 << AT91CAP9_ID_TWI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pmc_mask = 1 << AT91CAP9_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pmc_mask = 1 << AT91CAP9_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc0_clk = { + .name = "ssc0_clk", + .pmc_mask = 1 << AT91CAP9_ID_SSC0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc1_clk = { + .name = "ssc1_clk", + .pmc_mask = 1 << AT91CAP9_ID_SSC1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ac97_clk = { + .name = "ac97_clk", + .pmc_mask = 1 << AT91CAP9_ID_AC97C, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tcb_clk = { + .name = "tcb_clk", + .pmc_mask = 1 << AT91CAP9_ID_TCB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pwmc_clk = { + .name = "pwmc_clk", + .pmc_mask = 1 << AT91CAP9_ID_PWMC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk macb_clk = { + .name = "macb_clk", + .pmc_mask = 1 << AT91CAP9_ID_EMAC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk aestdes_clk = { + .name = "aestdes_clk", + .pmc_mask = 1 << AT91CAP9_ID_AESTDES, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk adc_clk = { + .name = "adc_clk", + .pmc_mask = 1 << AT91CAP9_ID_ADC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk isi_clk = { + .name = "isi_clk", + .pmc_mask = 1 << AT91CAP9_ID_ISI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk lcdc_clk = { + .name = "lcdc_clk", + .pmc_mask = 1 << AT91CAP9_ID_LCDC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma_clk = { + .name = "dma_clk", + .pmc_mask = 1 << AT91CAP9_ID_DMA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udphs_clk = { + .name = "udphs_clk", + .pmc_mask = 1 << AT91CAP9_ID_UDPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ohci_clk = { + .name = "ohci_clk", + .pmc_mask = 1 << AT91CAP9_ID_UHP, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioABCD_clk, + &mpb0_clk, + &mpb1_clk, + &mpb2_clk, + &mpb3_clk, + &mpb4_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &mmc0_clk, + &mmc1_clk, + &can_clk, + &twi_clk, + &spi0_clk, + &spi1_clk, + &ssc0_clk, + &ssc1_clk, + &ac97_clk, + &tcb_clk, + &pwmc_clk, + &macb_clk, + &aestdes_clk, + &adc_clk, + &isi_clk, + &lcdc_clk, + &dma_clk, + &udphs_clk, + &ohci_clk, + // irq0 .. irq1 +}; + +/* + * The four programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; +static struct clk pck2 = { + .name = "pck2", + .pmc_mask = AT91_PMC_PCK2, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 2, +}; +static struct clk pck3 = { + .name = "pck3", + .pmc_mask = AT91_PMC_PCK3, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 3, +}; + +static void __init at91cap9_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clk_register(&pck0); + clk_register(&pck1); + clk_register(&pck2); + clk_register(&pck3); +} + +/* -------------------------------------------------------------------- + * GPIO + * -------------------------------------------------------------------- */ + +static struct at91_gpio_bank at91cap9_gpio[] = { + { + .id = AT91CAP9_ID_PIOABCD, + .offset = AT91_PIOA, + .clock = &pioABCD_clk, + }, { + .id = AT91CAP9_ID_PIOABCD, + .offset = AT91_PIOB, + .clock = &pioABCD_clk, + }, { + .id = AT91CAP9_ID_PIOABCD, + .offset = AT91_PIOC, + .clock = &pioABCD_clk, + }, { + .id = AT91CAP9_ID_PIOABCD, + .offset = AT91_PIOD, + .clock = &pioABCD_clk, + } +}; + +static void at91cap9_reset(void) +{ + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); +} + +/* -------------------------------------------------------------------- + * AT91CAP9 processor initialization + * -------------------------------------------------------------------- */ + +void __init at91cap9_initialize(unsigned long main_clock) +{ + /* Map peripherals */ + iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); + + at91_arch_reset = at91cap9_reset; + at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); + + /* Init clock subsystem */ + at91_clock_init(main_clock); + + /* Register the processor-specific clocks */ + at91cap9_register_clocks(); + + /* Register GPIO subsystem */ + at91_gpio_init(at91cap9_gpio, 4); +} + +/* -------------------------------------------------------------------- + * Interrupt initialization + * -------------------------------------------------------------------- */ + +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ + 1, /* Parallel IO Controller A, B, C and D */ + 0, /* MP Block Peripheral 0 */ + 0, /* MP Block Peripheral 1 */ + 0, /* MP Block Peripheral 2 */ + 0, /* MP Block Peripheral 3 */ + 0, /* MP Block Peripheral 4 */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ + 0, /* Multimedia Card Interface 0 */ + 0, /* Multimedia Card Interface 1 */ + 3, /* CAN */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 5, /* AC97 Controller */ + 0, /* Timer Counter 0, 1 and 2 */ + 0, /* Pulse Width Modulation Controller */ + 3, /* Ethernet */ + 0, /* Advanced Encryption Standard, Triple DES*/ + 0, /* Analog-to-Digital Converter */ + 0, /* Image Sensor Interface */ + 3, /* LCD Controller */ + 0, /* DMA Controller */ + 2, /* USB Device Port */ + 2, /* USB Host port */ + 0, /* Advanced Interrupt Controller (IRQ0) */ + 0, /* Advanced Interrupt Controller (IRQ1) */ +}; + +void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS]) +{ + if (!priority) + priority = at91cap9_default_irq_priority; + + /* Initialize the AIC interrupt controller */ + at91_aic_init(priority); + + /* Enable GPIO interrupts */ + at91_gpio_irq_setup(); +} diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c new file mode 100644 index 000000000000..c50fad9cd143 --- /dev/null +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -0,0 +1,1066 @@ +/* + * arch/arm/mach-at91/at91cap9_devices.c + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2007 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> + +#include <video/atmel_lcdc.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91cap9.h> +#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91cap9_matrix.h> + +#include "generic.h" + + +/* -------------------------------------------------------------------- + * USB Host + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static u64 ohci_dmamask = DMA_BIT_MASK(32); +static struct at91_usbh_data usbh_data; + +static struct resource usbh_resources[] = { + [0] = { + .start = AT91CAP9_UHP_BASE, + .end = AT91CAP9_UHP_BASE + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_UHP, + .end = AT91CAP9_ID_UHP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_usbh_device = { + .name = "at91_ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &usbh_data, + }, + .resource = usbh_resources, + .num_resources = ARRAY_SIZE(usbh_resources), +}; + +void __init at91_add_device_usbh(struct at91_usbh_data *data) +{ + int i; + + if (!data) + return; + + /* Enable VBus control for UHP ports */ + for (i = 0; i < data->ports; i++) { + if (data->vbus_pin[i]) + at91_set_gpio_output(data->vbus_pin[i], 0); + } + + usbh_data = *data; + platform_device_register(&at91_usbh_device); +} +#else +void __init at91_add_device_usbh(struct at91_usbh_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * Ethernet + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) +static u64 eth_dmamask = DMA_BIT_MASK(32); +static struct at91_eth_data eth_data; + +static struct resource eth_resources[] = { + [0] = { + .start = AT91CAP9_BASE_EMAC, + .end = AT91CAP9_BASE_EMAC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_EMAC, + .end = AT91CAP9_ID_EMAC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_eth_device = { + .name = "macb", + .id = -1, + .dev = { + .dma_mask = ð_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = ð_data, + }, + .resource = eth_resources, + .num_resources = ARRAY_SIZE(eth_resources), +}; + +void __init at91_add_device_eth(struct at91_eth_data *data) +{ + if (!data) + return; + + if (data->phy_irq_pin) { + at91_set_gpio_input(data->phy_irq_pin, 0); + at91_set_deglitch(data->phy_irq_pin, 1); + } + + /* Pins used for MII and RMII */ + at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */ + at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */ + + if (!data->is_rmii) { + at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ + } + + eth_data = *data; + platform_device_register(&at91cap9_eth_device); +} +#else +void __init at91_add_device_eth(struct at91_eth_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * MMC / SD + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +static u64 mmc_dmamask = DMA_BIT_MASK(32); +static struct at91_mmc_data mmc0_data, mmc1_data; + +static struct resource mmc0_resources[] = { + [0] = { + .start = AT91CAP9_BASE_MCI0, + .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_MCI0, + .end = AT91CAP9_ID_MCI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_mmc0_device = { + .name = "at91_mci", + .id = 0, + .dev = { + .dma_mask = &mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &mmc0_data, + }, + .resource = mmc0_resources, + .num_resources = ARRAY_SIZE(mmc0_resources), +}; + +static struct resource mmc1_resources[] = { + [0] = { + .start = AT91CAP9_BASE_MCI1, + .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_MCI1, + .end = AT91CAP9_ID_MCI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_mmc1_device = { + .name = "at91_mci", + .id = 1, + .dev = { + .dma_mask = &mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &mmc1_data, + }, + .resource = mmc1_resources, + .num_resources = ARRAY_SIZE(mmc1_resources), +}; + +void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +{ + if (!data) + return; + + /* input/irq */ + if (data->det_pin) { + at91_set_gpio_input(data->det_pin, 1); + at91_set_deglitch(data->det_pin, 1); + } + if (data->wp_pin) + at91_set_gpio_input(data->wp_pin, 1); + if (data->vcc_pin) + at91_set_gpio_output(data->vcc_pin, 0); + + if (mmc_id == 0) { /* MCI0 */ + /* CLK */ + at91_set_A_periph(AT91_PIN_PA2, 0); + + /* CMD */ + at91_set_A_periph(AT91_PIN_PA1, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA0, 1); + if (data->wire4) { + at91_set_A_periph(AT91_PIN_PA3, 1); + at91_set_A_periph(AT91_PIN_PA4, 1); + at91_set_A_periph(AT91_PIN_PA5, 1); + } + + mmc0_data = *data; + at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk"); + platform_device_register(&at91cap9_mmc0_device); + } else { /* MCI1 */ + /* CLK */ + at91_set_A_periph(AT91_PIN_PA16, 0); + + /* CMD */ + at91_set_A_periph(AT91_PIN_PA17, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA18, 1); + if (data->wire4) { + at91_set_A_periph(AT91_PIN_PA19, 1); + at91_set_A_periph(AT91_PIN_PA20, 1); + at91_set_A_periph(AT91_PIN_PA21, 1); + } + + mmc1_data = *data; + at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk"); + platform_device_register(&at91cap9_mmc1_device); + } +} +#else +void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * NAND / SmartMedia + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +static struct at91_nand_data nand_data; + +#define NAND_BASE AT91_CHIPSELECT_3 + +static struct resource nand_resources[] = { + { + .start = NAND_BASE, + .end = NAND_BASE + SZ_256M - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91cap9_nand_device = { + .name = "at91_nand", + .id = -1, + .dev = { + .platform_data = &nand_data, + }, + .resource = nand_resources, + .num_resources = ARRAY_SIZE(nand_resources), +}; + +void __init at91_add_device_nand(struct at91_nand_data *data) +{ + unsigned long csa, mode; + + if (!data) + return; + + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); + + /* set the bus interface characteristics */ + at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) + | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1)); + + at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) + | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6)); + + at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8)); + + if (data->bus_width_16) + mode = AT91_SMC_DBW_16; + else + mode = AT91_SMC_DBW_8; + at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1)); + + /* enable pin */ + if (data->enable_pin) + at91_set_gpio_output(data->enable_pin, 1); + + /* ready/busy pin */ + if (data->rdy_pin) + at91_set_gpio_input(data->rdy_pin, 1); + + /* card detect pin */ + if (data->det_pin) + at91_set_gpio_input(data->det_pin, 1); + + nand_data = *data; + platform_device_register(&at91cap9_nand_device); +} +#else +void __init at91_add_device_nand(struct at91_nand_data *data) {} +#endif + +/* -------------------------------------------------------------------- + * TWI (i2c) + * -------------------------------------------------------------------- */ + +/* + * Prefer the GPIO code since the TWI controller isn't robust + * (gets overruns and underruns under load) and can only issue + * repeated STARTs in one scenario (the driver doesn't yet handle them). + */ +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + +static struct i2c_gpio_platform_data pdata = { + .sda_pin = AT91_PIN_PB4, + .sda_is_open_drain = 1, + .scl_pin = AT91_PIN_PB5, + .scl_is_open_drain = 1, + .udelay = 2, /* ~100 kHz */ +}; + +static struct platform_device at91cap9_twi_device = { + .name = "i2c-gpio", + .id = -1, + .dev.platform_data = &pdata, +}; + +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) +{ + at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */ + at91_set_multi_drive(AT91_PIN_PB4, 1); + + at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */ + at91_set_multi_drive(AT91_PIN_PB5, 1); + + i2c_register_board_info(0, devices, nr_devices); + platform_device_register(&at91cap9_twi_device); +} + +#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) + +static struct resource twi_resources[] = { + [0] = { + .start = AT91CAP9_BASE_TWI, + .end = AT91CAP9_BASE_TWI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_TWI, + .end = AT91CAP9_ID_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_twi_device = { + .name = "at91_i2c", + .id = -1, + .resource = twi_resources, + .num_resources = ARRAY_SIZE(twi_resources), +}; + +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) +{ + /* pins used for TWI interface */ + at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */ + at91_set_multi_drive(AT91_PIN_PB4, 1); + + at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */ + at91_set_multi_drive(AT91_PIN_PB5, 1); + + i2c_register_board_info(0, devices, nr_devices); + platform_device_register(&at91cap9_twi_device); +} +#else +void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} +#endif + +/* -------------------------------------------------------------------- + * SPI + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) +static u64 spi_dmamask = DMA_BIT_MASK(32); + +static struct resource spi0_resources[] = { + [0] = { + .start = AT91CAP9_BASE_SPI0, + .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_SPI0, + .end = AT91CAP9_ID_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_spi0_device = { + .name = "atmel_spi", + .id = 0, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = spi0_resources, + .num_resources = ARRAY_SIZE(spi0_resources), +}; + +static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 }; + +static struct resource spi1_resources[] = { + [0] = { + .start = AT91CAP9_BASE_SPI1, + .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_SPI1, + .end = AT91CAP9_ID_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_spi1_device = { + .name = "atmel_spi", + .id = 1, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = spi1_resources, + .num_resources = ARRAY_SIZE(spi1_resources), +}; + +static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 }; + +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) +{ + int i; + unsigned long cs_pin; + short enable_spi0 = 0; + short enable_spi1 = 0; + + /* Choose SPI chip-selects */ + for (i = 0; i < nr_devices; i++) { + if (devices[i].controller_data) + cs_pin = (unsigned long) devices[i].controller_data; + else if (devices[i].bus_num == 0) + cs_pin = spi0_standard_cs[devices[i].chip_select]; + else + cs_pin = spi1_standard_cs[devices[i].chip_select]; + + if (devices[i].bus_num == 0) + enable_spi0 = 1; + else + enable_spi1 = 1; + + /* enable chip-select pin */ + at91_set_gpio_output(cs_pin, 1); + + /* pass chip-select pin to driver */ + devices[i].controller_data = (void *) cs_pin; + } + + spi_register_board_info(devices, nr_devices); + + /* Configure SPI bus(es) */ + if (enable_spi0) { + at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ + + at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk"); + platform_device_register(&at91cap9_spi0_device); + } + if (enable_spi1) { + at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */ + at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ + at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ + + at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk"); + platform_device_register(&at91cap9_spi1_device); + } +} +#else +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} +#endif + + +/* -------------------------------------------------------------------- + * RTT + * -------------------------------------------------------------------- */ + +static struct platform_device at91cap9_rtt_device = { + .name = "at91_rtt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_rtt(void) +{ + platform_device_register(&at91cap9_rtt_device); +} + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91cap9_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91cap9_wdt_device); +} +#else +static void __init at91_add_device_watchdog(void) {} +#endif + + +/* -------------------------------------------------------------------- + * AC97 + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE) +static u64 ac97_dmamask = DMA_BIT_MASK(32); +static struct atmel_ac97_data ac97_data; + +static struct resource ac97_resources[] = { + [0] = { + .start = AT91CAP9_BASE_AC97C, + .end = AT91CAP9_BASE_AC97C + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_AC97C, + .end = AT91CAP9_ID_AC97C, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_ac97_device = { + .name = "ac97c", + .id = 1, + .dev = { + .dma_mask = &ac97_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &ac97_data, + }, + .resource = ac97_resources, + .num_resources = ARRAY_SIZE(ac97_resources), +}; + +void __init at91_add_device_ac97(struct atmel_ac97_data *data) +{ + if (!data) + return; + + at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */ + at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */ + at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */ + at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */ + + /* reset */ + if (data->reset_pin) + at91_set_gpio_output(data->reset_pin, 0); + + ac97_data = *data; + platform_device_register(&at91cap9_ac97_device); +} +#else +void __init at91_add_device_ac97(struct atmel_ac97_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * LCD Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) +static u64 lcdc_dmamask = DMA_BIT_MASK(32); +static struct atmel_lcdfb_info lcdc_data; + +static struct resource lcdc_resources[] = { + [0] = { + .start = AT91CAP9_LCDC_BASE, + .end = AT91CAP9_LCDC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_LCDC, + .end = AT91CAP9_ID_LCDC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91_lcdc_device = { + .name = "atmel_lcdfb", + .id = 0, + .dev = { + .dma_mask = &lcdc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &lcdc_data, + }, + .resource = lcdc_resources, + .num_resources = ARRAY_SIZE(lcdc_resources), +}; + +void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) +{ + if (!data) + return; + + at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ + at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ + at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ + at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ + at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ + at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ + at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ + at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ + at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ + at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */ + at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ + at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ + at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ + at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ + at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ + at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */ + at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ + at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ + + lcdc_data = *data; + platform_device_register(&at91_lcdc_device); +} +#else +void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} +#endif + + +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91CAP9_BASE_SSC0, + .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_SSC0, + .end = AT91CAP9_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB0, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB1, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB2, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB3, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB4, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB5, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91CAP9_BASE_SSC1, + .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_SSC1, + .end = AT91CAP9_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91cap9_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB6, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB7, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB8, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB9, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB10, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB11, 1); +} + +/* + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) +{ + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91CAP9_ID_SSC0: + pdev = &at91cap9_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); + break; + case AT91CAP9_ID_SSC1: + pdev = &at91cap9_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); + break; + default: + return; + } + + platform_device_register(pdev); +} + +#else +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} +#endif + + +/* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SERIAL_ATMEL) +static struct resource dbgu_resources[] = { + [0] = { + .start = AT91_VA_BASE_SYS + AT91_DBGU, + .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_SYS, + .end = AT91_ID_SYS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data dbgu_data = { + .use_dma_tx = 0, + .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), +}; + +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + +static struct platform_device at91cap9_dbgu_device = { + .name = "atmel_usart", + .id = 0, + .dev = { + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, + }, + .resource = dbgu_resources, + .num_resources = ARRAY_SIZE(dbgu_resources), +}; + +static inline void configure_dbgu_pins(void) +{ + at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ +} + +static struct resource uart0_resources[] = { + [0] = { + .start = AT91CAP9_BASE_US0, + .end = AT91CAP9_BASE_US0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_US0, + .end = AT91CAP9_ID_US0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart0_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static u64 uart0_dmamask = DMA_BIT_MASK(32); + +static struct platform_device at91cap9_uart0_device = { + .name = "atmel_usart", + .id = 1, + .dev = { + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, + }, + .resource = uart0_resources, + .num_resources = ARRAY_SIZE(uart0_resources), +}; + +static inline void configure_usart0_pins(unsigned pins) +{ + at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */ +} + +static struct resource uart1_resources[] = { + [0] = { + .start = AT91CAP9_BASE_US1, + .end = AT91CAP9_BASE_US1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_US1, + .end = AT91CAP9_ID_US1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart1_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static u64 uart1_dmamask = DMA_BIT_MASK(32); + +static struct platform_device at91cap9_uart1_device = { + .name = "atmel_usart", + .id = 2, + .dev = { + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, + }, + .resource = uart1_resources, + .num_resources = ARRAY_SIZE(uart1_resources), +}; + +static inline void configure_usart1_pins(unsigned pins) +{ + at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ +} + +static struct resource uart2_resources[] = { + [0] = { + .start = AT91CAP9_BASE_US2, + .end = AT91CAP9_BASE_US2 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91CAP9_ID_US2, + .end = AT91CAP9_ID_US2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct atmel_uart_data uart2_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static u64 uart2_dmamask = DMA_BIT_MASK(32); + +static struct platform_device at91cap9_uart2_device = { + .name = "atmel_usart", + .id = 3, + .dev = { + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, + }, + .resource = uart2_resources, + .num_resources = ARRAY_SIZE(uart2_resources), +}; + +static inline void configure_usart2_pins(unsigned pins) +{ + at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ +} + +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +struct platform_device *atmel_default_console_device; /* the serial console device */ + +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91cap9_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91CAP9_ID_US0: + pdev = &at91cap9_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91CAP9_ID_US1: + pdev = &at91cap9_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91CAP9_ID_US2: + pdev = &at91cap9_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + +void __init at91_add_device_serial(void) +{ + int i; + + for (i = 0; i < ATMEL_MAX_UART; i++) { + if (at91_uarts[i]) + platform_device_register(at91_uarts[i]); + } +} +#else +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} +void __init at91_add_device_serial(void) {} +#endif + + +/* -------------------------------------------------------------------- */ +/* + * These devices are always present and don't need any board-specific + * setup. + */ +static int __init at91_add_standard_devices(void) +{ + at91_add_device_rtt(); + at91_add_device_watchdog(); + return 0; +} + +arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 2cad2bf864be..d688c1dbd925 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -301,28 +301,28 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller (FIQ) */ 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ - 0, /* Parallel IO Controller D */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ - 6, /* USART 3 */ + 1, /* Parallel IO Controller A */ + 1, /* Parallel IO Controller B */ + 1, /* Parallel IO Controller C */ + 1, /* Parallel IO Controller D */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ + 5, /* USART 3 */ 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 5, /* Serial Synchronous Controller 2 */ + 2, /* USB Device Port */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 4, /* Serial Synchronous Controller 2 */ 0, /* Timer Counter 0 */ 0, /* Timer Counter 1 */ 0, /* Timer Counter 2 */ 0, /* Timer Counter 3 */ 0, /* Timer Counter 4 */ 0, /* Timer Counter 5 */ - 3, /* USB Host port */ + 2, /* USB Host port */ 3, /* Ethernet MAC */ 0, /* Advanced Interrupt Controller (IRQ0) */ 0, /* Advanced Interrupt Controller (IRQ1) */ diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 9296833f91cc..ef6aeb86e980 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -13,6 +13,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -29,7 +30,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = 0xffffffffUL; +static u64 ohci_dmamask = DMA_BIT_MASK(32); static struct at91_usbh_data usbh_data; static struct resource usbh_resources[] = { @@ -50,7 +51,7 @@ static struct platform_device at91rm9200_usbh_device = { .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &usbh_data, }, .resource = usbh_resources, @@ -125,7 +126,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE) -static u64 eth_dmamask = 0xffffffffUL; +static u64 eth_dmamask = DMA_BIT_MASK(32); static struct at91_eth_data eth_data; static struct resource eth_resources[] = { @@ -146,7 +147,7 @@ static struct platform_device at91rm9200_eth_device = { .id = -1, .dev = { .dma_mask = ð_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = ð_data, }, .resource = eth_resources, @@ -285,7 +286,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc_data; static struct resource mmc_resources[] = { @@ -306,7 +307,7 @@ static struct platform_device at91rm9200_mmc_device = { .id = -1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc_data, }, .resource = mmc_resources, @@ -375,7 +376,7 @@ static struct at91_nand_data nand_data; static struct resource nand_resources[] = { { .start = NAND_BASE, - .end = NAND_BASE + SZ_8M - 1, + .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, } }; @@ -513,7 +514,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi_resources[] = { [0] = { @@ -533,7 +534,7 @@ static struct platform_device at91rm9200_spi_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi_resources, .num_resources = ARRAY_SIZE(spi_resources), @@ -557,8 +558,11 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi_standard_cs[devices[i].chip_select]; - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); + if (devices[i].chip_select == 0) /* for CS0 errata */ + at91_set_A_periph(cs_pin, 0); + else + at91_set_gpio_output(cs_pin, 1); + /* pass chip-select pin to driver */ devices[i].controller_data = (void *) cs_pin; @@ -613,24 +617,175 @@ static void __init at91_add_device_watchdog(void) {} /* -------------------------------------------------------------------- - * LEDs + * SSC -- Synchronous Serial Controller * -------------------------------------------------------------------- */ -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91RM9200_BASE_SSC0, + .end = AT91RM9200_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_SSC0, + .end = AT91RM9200_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB0, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB1, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB2, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB3, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB4, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB5, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91RM9200_BASE_SSC1, + .end = AT91RM9200_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_SSC1, + .end = AT91RM9200_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB6, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB7, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB8, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB9, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB10, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB11, 1); +} + +static u64 ssc2_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc2_resources[] = { + [0] = { + .start = AT91RM9200_BASE_SSC2, + .end = AT91RM9200_BASE_SSC2 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_SSC2, + .end = AT91RM9200_ID_SSC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_ssc2_device = { + .name = "ssc", + .id = 2, + .dev = { + .dma_mask = &ssc2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc2_resources, + .num_resources = ARRAY_SIZE(ssc2_resources), +}; + +static inline void configure_ssc2_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB12, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB13, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB14, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB15, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB16, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB17, 1); +} -void __init at91_init_leds(u8 cpu_led, u8 timer_led) +/* + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) { - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); + struct platform_device *pdev; - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91RM9200_ID_SSC0: + pdev = &at91rm9200_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); + break; + case AT91RM9200_ID_SSC1: + pdev = &at91rm9200_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); + break; + case AT91RM9200_ID_SSC2: + pdev = &at91rm9200_ssc2_device; + configure_ssc2_pins(pins); + at91_clock_associate("ssc2_clk", &pdev->dev, "ssc"); + break; + default: + return; + } + + platform_device_register(pdev); } + #else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #endif @@ -658,12 +813,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -693,28 +851,35 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */ - /* - * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. - * We need to drive the pin manually. Default is off (RTS is active low). - */ - at91_set_gpio_output(AT91_PIN_PA21, 1); + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) { + /* + * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. + * We need to drive the pin manually. Default is off (RTS is active low). + */ + at91_set_gpio_output(AT91_PIN_PA21, 1); + } } static struct resource uart1_resources[] = { @@ -735,27 +900,37 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { - at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */ - at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */ at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */ + + if (pins & ATMEL_UART_RI) + at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */ + if (pins & ATMEL_UART_DTR) + at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */ + if (pins & ATMEL_UART_DCD) + at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */ + if (pins & ATMEL_UART_DSR) + at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */ + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */ } static struct resource uart2_resources[] = { @@ -776,21 +951,29 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */ at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */ + + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */ + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */ } static struct resource uart3_resources[] = { @@ -811,27 +994,35 @@ static struct atmel_uart_data uart3_data = { .use_dma_rx = 1, }; +static u64 uart3_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_uart3_device = { .name = "atmel_usart", .id = 4, .dev = { - .platform_data = &uart3_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart3_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart3_data, }, .resource = uart3_resources, .num_resources = ARRAY_SIZE(uart3_resources), }; -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(unsigned pins) { at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */ at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ + + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */ + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -839,22 +1030,22 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91rm9200_uart0_device; at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); at91_uarts[i] = &at91rm9200_uart1_device; at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91rm9200_uart2_device; at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); break; case 3: - configure_usart3_pins(); + configure_usart3_pins(0); at91_uarts[i] = &at91rm9200_uart3_device; at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); break; @@ -876,6 +1067,53 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91rm9200_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US0: + pdev = &at91rm9200_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US1: + pdev = &at91rm9200_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US2: + pdev = &at91rm9200_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US3: + pdev = &at91rm9200_uart3_device; + configure_usart3_pins(pins); + at91_clock_associate("usart3_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -886,7 +1124,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index e47381e8aaba..18d06612ce8a 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -327,30 +327,30 @@ void __init at91sam9260_initialize(unsigned long main_clock) static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller */ 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ + 1, /* Parallel IO Controller A */ + 1, /* Parallel IO Controller B */ + 1, /* Parallel IO Controller C */ 0, /* Analog-to-Digital Converter */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ + 2, /* USB Device Port */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ 5, /* Serial Synchronous Controller */ 0, 0, 0, /* Timer Counter 0 */ 0, /* Timer Counter 1 */ 0, /* Timer Counter 2 */ - 3, /* USB Host port */ + 2, /* USB Host port */ 3, /* Ethernet */ 0, /* Image Sensor Interface */ - 6, /* USART 3 */ - 6, /* USART 4 */ - 6, /* USART 5 */ + 5, /* USART 3 */ + 5, /* USART 4 */ + 5, /* USART 5 */ 0, /* Timer Counter 3 */ 0, /* Timer Counter 4 */ 0, /* Timer Counter 5 */ diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 3091bf47d8c9..105f8403860b 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -12,6 +12,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -29,7 +30,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = 0xffffffffUL; +static u64 ohci_dmamask = DMA_BIT_MASK(32); static struct at91_usbh_data usbh_data; static struct resource usbh_resources[] = { @@ -50,7 +51,7 @@ static struct platform_device at91_usbh_device = { .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &usbh_data, }, .resource = usbh_resources, @@ -125,7 +126,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = 0xffffffffUL; +static u64 eth_dmamask = DMA_BIT_MASK(32); static struct at91_eth_data eth_data; static struct resource eth_resources[] = { @@ -146,7 +147,7 @@ static struct platform_device at91sam9260_eth_device = { .id = -1, .dev = { .dma_mask = ð_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = ð_data, }, .resource = eth_resources, @@ -199,7 +200,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc_data; static struct resource mmc_resources[] = { @@ -220,7 +221,7 @@ static struct platform_device at91sam9260_mmc_device = { .id = -1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc_data, }, .resource = mmc_resources, @@ -289,7 +290,7 @@ static struct at91_nand_data nand_data; static struct resource nand_resources[] = { { .start = NAND_BASE, - .end = NAND_BASE + SZ_8M - 1, + .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, } }; @@ -312,7 +313,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) return; csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) @@ -431,7 +432,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi0_resources[] = { [0] = { @@ -451,7 +452,7 @@ static struct platform_device at91sam9260_spi0_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi0_resources, .num_resources = ARRAY_SIZE(spi0_resources), @@ -477,7 +478,7 @@ static struct platform_device at91sam9260_spi1_device = { .id = 1, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi1_resources, .num_resources = ARRAY_SIZE(spi1_resources), @@ -539,24 +540,126 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) /* -------------------------------------------------------------------- - * LEDs + * RTT * -------------------------------------------------------------------- */ -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; +static struct resource rtt_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT, + .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; -void __init at91_init_leds(u8 cpu_led, u8 timer_led) +static struct platform_device at91sam9260_rtt_device = { + .name = "at91_rtt", + .id = -1, + .resource = rtt_resources, + .num_resources = ARRAY_SIZE(rtt_resources), +}; + +static void __init at91_add_device_rtt(void) { - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); + platform_device_register(&at91sam9260_rtt_device); +} + - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91sam9260_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91sam9260_wdt_device); } #else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +static void __init at91_add_device_watchdog(void) {} +#endif + + +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_SSC, + .end = AT91SAM9260_BASE_SSC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_SSC, + .end = AT91SAM9260_ID_SSC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9260_ssc_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc_resources, + .num_resources = ARRAY_SIZE(ssc_resources), +}; + +static inline void configure_ssc_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB17, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB16, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB18, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB19, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB20, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB21, 1); +} + +/* + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) +{ + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91SAM9260_ID_SSC: + pdev = &at91sam9260_ssc_device; + configure_ssc_pins(pins); + at91_clock_associate("ssc_clk", &pdev->dev, "pclk"); + break; + default: + return; + } + + platform_device_register(pdev); +} + +#else +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #endif @@ -583,12 +686,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -618,27 +724,37 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ - at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ + if (pins & ATMEL_UART_DTR) + at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ + if (pins & ATMEL_UART_DSR) + at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ + if (pins & ATMEL_UART_DCD) + at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ + if (pins & ATMEL_UART_RI) + at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ } static struct resource uart1_resources[] = { @@ -659,23 +775,29 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ - at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ - at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -696,21 +818,29 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */ } static struct resource uart3_resources[] = { @@ -731,21 +861,29 @@ static struct atmel_uart_data uart3_data = { .use_dma_rx = 1, }; +static u64 uart3_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart3_device = { .name = "atmel_usart", .id = 4, .dev = { - .platform_data = &uart3_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart3_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart3_data, }, .resource = uart3_resources, .num_resources = ARRAY_SIZE(uart3_resources), }; -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */ at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */ } static struct resource uart4_resources[] = { @@ -766,12 +904,15 @@ static struct atmel_uart_data uart4_data = { .use_dma_rx = 1, }; +static u64 uart4_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart4_device = { .name = "atmel_usart", .id = 5, .dev = { - .platform_data = &uart4_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart4_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart4_data, }, .resource = uart4_resources, .num_resources = ARRAY_SIZE(uart4_resources), @@ -801,12 +942,15 @@ static struct atmel_uart_data uart5_data = { .use_dma_rx = 1, }; +static u64 uart5_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart5_device = { .name = "atmel_usart", .id = 6, .dev = { - .platform_data = &uart5_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart5_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart5_data, }, .resource = uart5_resources, .num_resources = ARRAY_SIZE(uart5_resources), @@ -818,10 +962,10 @@ static inline void configure_usart5_pins(void) at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -829,22 +973,22 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); at91_uarts[i] = &at91sam9260_uart0_device; at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9260_uart1_device; at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91sam9260_uart2_device; at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart"); break; case 3: - configure_usart3_pins(); + configure_usart3_pins(0); at91_uarts[i] = &at91sam9260_uart3_device; at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart"); break; @@ -876,6 +1020,63 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9260_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US0: + pdev = &at91sam9260_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US1: + pdev = &at91sam9260_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US2: + pdev = &at91sam9260_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US3: + pdev = &at91sam9260_uart3_device; + configure_usart3_pins(pins); + at91_clock_associate("usart3_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US4: + pdev = &at91sam9260_uart4_device; + configure_usart4_pins(); + at91_clock_associate("usart4_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US5: + pdev = &at91sam9260_uart5_device; + configure_usart5_pins(); + at91_clock_associate("usart5_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -886,7 +1087,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif @@ -898,6 +1101,8 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + at91_add_device_rtt(); + at91_add_device_watchdog(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index dfe8c39c9fb9..90b87e1877d9 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -279,25 +279,25 @@ void __init at91sam9261_initialize(unsigned long main_clock) static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller */ 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ + 1, /* Parallel IO Controller A */ + 1, /* Parallel IO Controller B */ + 1, /* Parallel IO Controller C */ 0, - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 5, /* Serial Synchronous Controller 2 */ + 2, /* USB Device Port */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 4, /* Serial Synchronous Controller 2 */ 0, /* Timer Counter 0 */ 0, /* Timer Counter 1 */ 0, /* Timer Counter 2 */ - 3, /* USB Host port */ + 2, /* USB Host port */ 3, /* LCD Controller */ 0, 0, diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 64979a9023c2..245641263fce 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -13,6 +13,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -33,7 +34,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = 0xffffffffUL; +static u64 ohci_dmamask = DMA_BIT_MASK(32); static struct at91_usbh_data usbh_data; static struct resource usbh_resources[] = { @@ -54,7 +55,7 @@ static struct platform_device at91sam9261_usbh_device = { .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &usbh_data, }, .resource = usbh_resources, @@ -106,8 +107,6 @@ static struct platform_device at91sam9261_udc_device = { void __init at91_add_device_udc(struct at91_udc_data *data) { - unsigned long x; - if (!data) return; @@ -116,9 +115,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) at91_set_deglitch(data->vbus_pin, 1); } - /* Pullup pin is handled internally */ - x = at91_sys_read(AT91_MATRIX_USBPUCR); - at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON); + /* Pullup pin is handled internally by USB device peripheral */ udc_data = *data; platform_device_register(&at91sam9261_udc_device); @@ -132,7 +129,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc_data; static struct resource mmc_resources[] = { @@ -153,7 +150,7 @@ static struct platform_device at91sam9261_mmc_device = { .id = -1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc_data, }, .resource = mmc_resources, @@ -232,7 +229,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) return; csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) @@ -354,7 +351,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi0_resources[] = { [0] = { @@ -374,7 +371,7 @@ static struct platform_device at91sam9261_spi0_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi0_resources, .num_resources = ARRAY_SIZE(spi0_resources), @@ -400,7 +397,7 @@ static struct platform_device at91sam9261_spi1_device = { .id = 1, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi1_resources, .num_resources = ARRAY_SIZE(spi1_resources), @@ -466,7 +463,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = 0xffffffffUL; +static u64 lcdc_dmamask = DMA_BIT_MASK(32); static struct atmel_lcdfb_info lcdc_data; static struct resource lcdc_resources[] = { @@ -494,7 +491,7 @@ static struct platform_device at91_lcdc_device = { .id = 0, .dev = { .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &lcdc_data, }, .resource = lcdc_resources, @@ -507,6 +504,17 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) return; } +#if defined(CONFIG_FB_ATMEL_STN) + at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */ + at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ + at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */ + at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */ + at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ +#else at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ @@ -529,6 +537,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ +#endif lcdc_data = *data; platform_device_register(&at91_lcdc_device); @@ -539,24 +548,220 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} /* -------------------------------------------------------------------- - * LEDs + * RTT + * -------------------------------------------------------------------- */ + +static struct resource rtt_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT, + .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9261_rtt_device = { + .name = "at91_rtt", + .id = -1, + .resource = rtt_resources, + .num_resources = ARRAY_SIZE(rtt_resources), +}; + +static void __init at91_add_device_rtt(void) +{ + platform_device_register(&at91sam9261_rtt_device); +} + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91sam9261_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91sam9261_wdt_device); +} +#else +static void __init at91_add_device_watchdog(void) {} +#endif + + +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller * -------------------------------------------------------------------- */ -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SSC0, + .end = AT91SAM9261_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_SSC0, + .end = AT91SAM9261_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB21, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB22, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB23, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB24, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB25, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB26, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SSC1, + .end = AT91SAM9261_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_SSC1, + .end = AT91SAM9261_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_B_periph(AT91_PIN_PA17, 1); + if (pins & ATMEL_SSC_TK) + at91_set_B_periph(AT91_PIN_PA18, 1); + if (pins & ATMEL_SSC_TD) + at91_set_B_periph(AT91_PIN_PA19, 1); + if (pins & ATMEL_SSC_RD) + at91_set_B_periph(AT91_PIN_PA20, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PA21, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PA22, 1); +} + +static u64 ssc2_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc2_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SSC2, + .end = AT91SAM9261_BASE_SSC2 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_SSC2, + .end = AT91SAM9261_ID_SSC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_ssc2_device = { + .name = "ssc", + .id = 2, + .dev = { + .dma_mask = &ssc2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc2_resources, + .num_resources = ARRAY_SIZE(ssc2_resources), +}; + +static inline void configure_ssc2_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_B_periph(AT91_PIN_PC25, 1); + if (pins & ATMEL_SSC_TK) + at91_set_B_periph(AT91_PIN_PC26, 1); + if (pins & ATMEL_SSC_TD) + at91_set_B_periph(AT91_PIN_PC27, 1); + if (pins & ATMEL_SSC_RD) + at91_set_B_periph(AT91_PIN_PC28, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PC29, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PC30, 1); +} -void __init at91_init_leds(u8 cpu_led, u8 timer_led) +/* + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) { - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91SAM9261_ID_SSC0: + pdev = &at91sam9261_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); + break; + case AT91SAM9261_ID_SSC1: + pdev = &at91sam9261_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); + break; + case AT91SAM9261_ID_SSC2: + pdev = &at91sam9261_ssc2_device; + configure_ssc2_pins(pins); + at91_clock_associate("ssc2_clk", &pdev->dev, "pclk"); + break; + default: + return; + } - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; + platform_device_register(pdev); } + #else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #endif @@ -584,12 +789,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9261_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -619,23 +827,29 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9261_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ } static struct resource uart1_resources[] = { @@ -656,21 +870,29 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9261_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -691,27 +913,35 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9261_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -719,17 +949,17 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9261_uart0_device; at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(0); at91_uarts[i] = &at91sam9261_uart1_device; at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91sam9261_uart2_device; at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart"); break; @@ -751,6 +981,48 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9261_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9261_ID_US0: + pdev = &at91sam9261_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9261_ID_US1: + pdev = &at91sam9261_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9261_ID_US2: + pdev = &at91sam9261_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -761,7 +1033,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif @@ -774,6 +1048,8 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + at91_add_device_rtt(); + at91_add_device_watchdog(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 00e27b177857..a53ba0f74351 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -304,34 +304,34 @@ void __init at91sam9263_initialize(unsigned long main_clock) static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller (FIQ) */ 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C, D and E */ + 1, /* Parallel IO Controller A */ + 1, /* Parallel IO Controller B */ + 1, /* Parallel IO Controller C, D and E */ 0, 0, - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ 0, /* Multimedia Card Interface 0 */ 0, /* Multimedia Card Interface 1 */ - 4, /* CAN */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 6, /* AC97 Controller */ + 3, /* CAN */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 5, /* AC97 Controller */ 0, /* Timer Counter 0, 1 and 2 */ 0, /* Pulse Width Modulation Controller */ 3, /* Ethernet */ 0, 0, /* 2D Graphic Engine */ - 3, /* USB Device Port */ + 2, /* USB Device Port */ 0, /* Image Sensor Interface */ 3, /* LDC Controller */ 0, /* DMA Controller */ 0, - 3, /* USB Host port */ + 2, /* USB Host port */ 0, /* Advanced Interrupt Controller (IRQ0) */ 0, /* Advanced Interrupt Controller (IRQ1) */ }; diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ac329a98e959..0b12e1adcc8e 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -12,6 +12,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -32,7 +33,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = 0xffffffffUL; +static u64 ohci_dmamask = DMA_BIT_MASK(32); static struct at91_usbh_data usbh_data; static struct resource usbh_resources[] = { @@ -53,7 +54,7 @@ static struct platform_device at91_usbh_device = { .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &usbh_data, }, .resource = usbh_resources, @@ -136,7 +137,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = 0xffffffffUL; +static u64 eth_dmamask = DMA_BIT_MASK(32); static struct at91_eth_data eth_data; static struct resource eth_resources[] = { @@ -157,7 +158,7 @@ static struct platform_device at91sam9263_eth_device = { .id = -1, .dev = { .dma_mask = ð_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = ð_data, }, .resource = eth_resources, @@ -210,7 +211,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc0_data, mmc1_data; static struct resource mmc0_resources[] = { @@ -231,7 +232,7 @@ static struct platform_device at91sam9263_mmc0_device = { .id = 0, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc0_data, }, .resource = mmc0_resources, @@ -256,7 +257,7 @@ static struct platform_device at91sam9263_mmc1_device = { .id = 1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc1_data, }, .resource = mmc1_resources, @@ -382,7 +383,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) return; csa = at91_sys_read(AT91_MATRIX_EBI0CSA); - at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC); + at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) @@ -500,7 +501,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi0_resources[] = { [0] = { @@ -520,7 +521,7 @@ static struct platform_device at91sam9263_spi0_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi0_resources, .num_resources = ARRAY_SIZE(spi0_resources), @@ -546,7 +547,7 @@ static struct platform_device at91sam9263_spi1_device = { .id = 1, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi1_resources, .num_resources = ARRAY_SIZE(spi1_resources), @@ -612,7 +613,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE) -static u64 ac97_dmamask = 0xffffffffUL; +static u64 ac97_dmamask = DMA_BIT_MASK(32); static struct atmel_ac97_data ac97_data; static struct resource ac97_resources[] = { @@ -633,7 +634,7 @@ static struct platform_device at91sam9263_ac97_device = { .id = 1, .dev = { .dma_mask = &ac97_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &ac97_data, }, .resource = ac97_resources, @@ -667,7 +668,7 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = 0xffffffffUL; +static u64 lcdc_dmamask = DMA_BIT_MASK(32); static struct atmel_lcdfb_info lcdc_data; static struct resource lcdc_resources[] = { @@ -688,7 +689,7 @@ static struct platform_device at91_lcdc_device = { .id = 0, .dev = { .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &lcdc_data, }, .resource = lcdc_resources, @@ -732,24 +733,242 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} /* -------------------------------------------------------------------- - * LEDs + * Image Sensor Interface * -------------------------------------------------------------------- */ -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; +#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE) -void __init at91_init_leds(u8 cpu_led, u8 timer_led) +struct resource isi_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_ISI, + .end = AT91SAM9263_BASE_ISI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_ISI, + .end = AT91SAM9263_ID_ISI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_isi_device = { + .name = "at91_isi", + .id = -1, + .resource = isi_resources, + .num_resources = ARRAY_SIZE(isi_resources), +}; + +void __init at91_add_device_isi(void) +{ + at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */ + at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */ + at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */ + at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */ + at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */ + at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */ + at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */ + at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */ + at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */ + at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */ + at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */ + at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ + at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */ + at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */ + at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */ + at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */ +} +#else +void __init at91_add_device_isi(void) {} +#endif + + +/* -------------------------------------------------------------------- + * RTT + * -------------------------------------------------------------------- */ + +static struct resource rtt0_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT0, + .end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9263_rtt0_device = { + .name = "at91_rtt", + .id = 0, + .resource = rtt0_resources, + .num_resources = ARRAY_SIZE(rtt0_resources), +}; + +static struct resource rtt1_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT1, + .end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9263_rtt1_device = { + .name = "at91_rtt", + .id = 1, + .resource = rtt1_resources, + .num_resources = ARRAY_SIZE(rtt1_resources), +}; + +static void __init at91_add_device_rtt(void) +{ + platform_device_register(&at91sam9263_rtt0_device); + platform_device_register(&at91sam9263_rtt1_device); +} + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91sam9263_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91sam9263_wdt_device); +} +#else +static void __init at91_add_device_watchdog(void) {} +#endif + + +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_SSC0, + .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_SSC0, + .end = AT91SAM9263_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_B_periph(AT91_PIN_PB0, 1); + if (pins & ATMEL_SSC_TK) + at91_set_B_periph(AT91_PIN_PB1, 1); + if (pins & ATMEL_SSC_TD) + at91_set_B_periph(AT91_PIN_PB2, 1); + if (pins & ATMEL_SSC_RD) + at91_set_B_periph(AT91_PIN_PB3, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PB4, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PB5, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_SSC1, + .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_SSC1, + .end = AT91SAM9263_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB6, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB7, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB8, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB9, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB10, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB11, 1); +} + +/* + * Return the device node so that board init code can use it as the + * parent for the device node reflecting how it's used on this board. + * + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) { - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91SAM9263_ID_SSC0: + pdev = &at91sam9263_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); + break; + case AT91SAM9263_ID_SSC1: + pdev = &at91sam9263_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); + break; + default: + return; + } - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; + platform_device_register(pdev); } + #else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #endif @@ -778,12 +997,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9263_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -813,23 +1035,29 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9263_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */ } static struct resource uart1_resources[] = { @@ -850,23 +1078,29 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9263_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ - at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -887,29 +1121,35 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9263_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ - at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -917,17 +1157,17 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9263_uart0_device; at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9263_uart1_device; at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9263_uart2_device; at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart"); break; @@ -949,6 +1189,48 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9263_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9263_ID_US0: + pdev = &at91sam9263_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9263_ID_US1: + pdev = &at91sam9263_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9263_ID_US2: + pdev = &at91sam9263_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -960,6 +1242,8 @@ void __init at91_add_device_serial(void) } #else void __init at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif @@ -971,6 +1255,8 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + at91_add_device_rtt(); + at91_add_device_watchdog(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 2bd60a3dc623..f43b5c33e45d 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -9,6 +9,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -29,7 +30,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc_data; static struct resource mmc_resources[] = { @@ -50,7 +51,7 @@ static struct platform_device at91sam9rl_mmc_device = { .id = -1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc_data, }, .resource = mmc_resources, @@ -247,7 +248,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi_resources[] = { [0] = { @@ -267,7 +268,7 @@ static struct platform_device at91sam9rl_spi_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi_resources, .num_resources = ARRAY_SIZE(spi_resources), @@ -312,7 +313,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = 0xffffffffUL; +static u64 lcdc_dmamask = DMA_BIT_MASK(32); static struct atmel_lcdfb_info lcdc_data; static struct resource lcdc_resources[] = { @@ -340,7 +341,7 @@ static struct platform_device at91_lcdc_device = { .id = 0, .dev = { .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &lcdc_data, }, .resource = lcdc_resources, @@ -384,24 +385,196 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} /* -------------------------------------------------------------------- - * LEDs + * RTC * -------------------------------------------------------------------- */ -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; +#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE) +static struct platform_device at91sam9rl_rtc_device = { + .name = "at91_rtc", + .id = -1, + .num_resources = 0, +}; -void __init at91_init_leds(u8 cpu_led, u8 timer_led) +static void __init at91_add_device_rtc(void) { - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); + platform_device_register(&at91sam9rl_rtc_device); +} +#else +static void __init at91_add_device_rtc(void) {} +#endif + + +/* -------------------------------------------------------------------- + * RTT + * -------------------------------------------------------------------- */ + +static struct resource rtt_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT, + .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9rl_rtt_device = { + .name = "at91_rtt", + .id = -1, + .resource = rtt_resources, + .num_resources = ARRAY_SIZE(rtt_resources), +}; - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; +static void __init at91_add_device_rtt(void) +{ + platform_device_register(&at91sam9rl_rtt_device); +} + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91sam9rl_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91sam9rl_wdt_device); } #else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +static void __init at91_add_device_watchdog(void) {} +#endif + + +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_SSC0, + .end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9RL_ID_SSC0, + .end = AT91SAM9RL_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9rl_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PC0, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PC1, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PA15, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PA16, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PA10, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PA22, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_SSC1, + .end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9RL_ID_SSC1, + .end = AT91SAM9RL_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9rl_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_B_periph(AT91_PIN_PA29, 1); + if (pins & ATMEL_SSC_TK) + at91_set_B_periph(AT91_PIN_PA30, 1); + if (pins & ATMEL_SSC_TD) + at91_set_B_periph(AT91_PIN_PA13, 1); + if (pins & ATMEL_SSC_RD) + at91_set_B_periph(AT91_PIN_PA14, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PA9, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PA8, 1); +} + +/* + * Return the device node so that board init code can use it as the + * parent for the device node reflecting how it's used on this board. + * + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) +{ + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91SAM9RL_ID_SSC0: + pdev = &at91sam9rl_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); + break; + case AT91SAM9RL_ID_SSC1: + pdev = &at91sam9rl_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); + break; + default: + return; + } + + platform_device_register(pdev); +} + +#else +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #endif @@ -429,12 +602,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -464,23 +640,37 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */ + if (pins & ATMEL_UART_DSR) + at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */ + if (pins & ATMEL_UART_DTR) + at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */ + if (pins & ATMEL_UART_DCD) + at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */ + if (pins & ATMEL_UART_RI) + at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */ } static struct resource uart1_resources[] = { @@ -501,21 +691,29 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -536,21 +734,29 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */ } static struct resource uart3_resources[] = { @@ -571,27 +777,35 @@ static struct atmel_uart_data uart3_data = { .use_dma_rx = 1, }; +static u64 uart3_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_uart3_device = { .name = "atmel_usart", .id = 4, .dev = { - .platform_data = &uart3_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart3_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart3_data, }, .resource = uart3_resources, .num_resources = ARRAY_SIZE(uart3_resources), }; -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */ at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -599,22 +813,22 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9rl_uart0_device; at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(0); at91_uarts[i] = &at91sam9rl_uart1_device; at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91sam9rl_uart2_device; at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart"); break; case 3: - configure_usart3_pins(); + configure_usart3_pins(0); at91_uarts[i] = &at91sam9rl_uart3_device; at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart"); break; @@ -636,6 +850,53 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9rl_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US0: + pdev = &at91sam9rl_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US1: + pdev = &at91sam9rl_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US2: + pdev = &at91sam9rl_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US3: + pdev = &at91sam9rl_uart3_device; + configure_usart3_pins(pins); + at91_clock_associate("usart3_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -646,7 +907,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif @@ -659,6 +922,9 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + at91_add_device_rtc(); + at91_add_device_rtt(); + at91_add_device_watchdog(); return 0; } diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c new file mode 100644 index 000000000000..185437131541 --- /dev/null +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -0,0 +1,359 @@ +/* + * linux/arch/arm/mach-at91/board-cap9adk.c + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2005 SAN People + * Copyright (C) 2007 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/fb.h> +#include <linux/mtd/physmap.h> + +#include <video/atmel_lcdc.h> + +#include <asm/hardware.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91cap9_matrix.h> +#include <asm/arch/at91sam926x_mc.h> + +#include "generic.h" + + +static void __init cap9adk_map_io(void) +{ + /* Initialize processor: 12 MHz crystal */ + at91cap9_initialize(12000000); + + /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */ + at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11); + /* ... POWER LED always on */ + at91_set_gpio_output(AT91_PIN_PC29, 1); + + /* Setup the serial ports and console */ + at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */ + at91_set_serial_console(0); +} + +static void __init cap9adk_init_irq(void) +{ + at91cap9_init_interrupts(NULL); +} + + +/* + * USB Host port + */ +static struct at91_usbh_data __initdata cap9adk_usbh_data = { + .ports = 2, +}; + + +/* + * ADS7846 Touchscreen + */ +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +static int ads7843_pendown_state(void) +{ + return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */ +} + +static struct ads7846_platform_data ads_info = { + .model = 7843, + .x_min = 150, + .x_max = 3830, + .y_min = 190, + .y_max = 3830, + .vref_delay_usecs = 100, + .x_plate_ohms = 450, + .y_plate_ohms = 250, + .pressure_max = 15000, + .debounce_max = 1, + .debounce_rep = 0, + .debounce_tol = (~0), + .get_pendown_state = ads7843_pendown_state, +}; + +static void __init cap9adk_add_device_ts(void) +{ + at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */ + at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */ +} +#else +static void __init cap9adk_add_device_ts(void) {} +#endif + + +/* + * SPI devices. + */ +static struct spi_board_info cap9adk_spi_devices[] = { +#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + { + .modalias = "ads7846", + .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */ + .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ + .bus_num = 0, + .platform_data = &ads_info, + .irq = AT91_PIN_PC4, + }, +#endif +}; + + +/* + * MCI (SD/MMC) + */ +static struct at91_mmc_data __initdata cap9adk_mmc_data = { + .wire4 = 1, +// .det_pin = ... not connected +// .wp_pin = ... not connected +// .vcc_pin = ... not connected +}; + + +/* + * MACB Ethernet device + */ +static struct at91_eth_data __initdata cap9adk_macb_data = { + .is_rmii = 1, +}; + + +/* + * NAND flash + */ +static struct mtd_partition __initdata cap9adk_nand_partitions[] = { + { + .name = "NAND partition", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions); + return cap9adk_nand_partitions; +} + +static struct at91_nand_data __initdata cap9adk_nand_data = { + .ale = 21, + .cle = 22, +// .det_pin = ... not connected +// .rdy_pin = ... not connected + .enable_pin = AT91_PIN_PD15, + .partition_info = nand_partitions, +#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) + .bus_width_16 = 1, +#else + .bus_width_16 = 0, +#endif +}; + + +/* + * NOR flash + */ +static struct mtd_partition cap9adk_nor_partitions[] = { + { + .name = "NOR partition", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data cap9adk_nor_data = { + .width = 2, + .parts = cap9adk_nor_partitions, + .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions), +}; + +#define NOR_BASE AT91_CHIPSELECT_0 +#define NOR_SIZE 0x800000 + +static struct resource nor_flash_resources[] = { + { + .start = NOR_BASE, + .end = NOR_BASE + NOR_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device cap9adk_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &cap9adk_nor_data, + }, + .resource = nor_flash_resources, + .num_resources = ARRAY_SIZE(nor_flash_resources), +}; + +static __init void cap9adk_add_device_nor(void) +{ + unsigned long csa; + + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); + + /* set the bus interface characteristics */ + at91_sys_write(AT91_SMC_SETUP(0), AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) + | AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2)); + + at91_sys_write(AT91_SMC_PULSE(0), AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) + | AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10)); + + at91_sys_write(AT91_SMC_CYCLE(0), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); + + at91_sys_write(AT91_SMC_MODE(0), AT91_SMC_READMODE | AT91_SMC_WRITEMODE + | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE + | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1)); + + platform_device_register(&cap9adk_nor_flash); +} + + +/* + * LCD Controller + */ +#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) +static struct fb_videomode at91_tft_vga_modes[] = { + { + .name = "TX09D50VM1CCA @ 60", + .refresh = 60, + .xres = 240, .yres = 320, + .pixclock = KHZ2PICOS(4965), + + .left_margin = 1, .right_margin = 33, + .upper_margin = 1, .lower_margin = 0, + .hsync_len = 5, .vsync_len = 1, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs at91fb_default_monspecs = { + .manufacturer = "HIT", + .monitor = "TX09D70VM1CCA", + + .modedb = at91_tft_vga_modes, + .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), + .hfmin = 15000, + .hfmax = 64000, + .vfmin = 50, + .vfmax = 150, +}; + +#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ + | ATMEL_LCDC_DISTYPE_TFT \ + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) + +static void at91_lcdc_power_control(int on) +{ + if (on) + at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */ + else + at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */ +} + +/* Driver datas */ +static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = { + .default_bpp = 16, + .default_dmacon = ATMEL_LCDC_DMAEN, + .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2, + .default_monspecs = &at91fb_default_monspecs, + .atmel_lcdfb_power_control = at91_lcdc_power_control, + .guard_time = 1, +}; + +#else +static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data; +#endif + + +/* + * AC97 + */ +static struct atmel_ac97_data cap9adk_ac97_data = { +// .reset_pin = ... not connected +}; + + +static void __init cap9adk_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH); + at91_add_device_usbh(&cap9adk_usbh_data); + /* SPI */ + at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); + /* Touchscreen */ + cap9adk_add_device_ts(); + /* MMC */ + at91_add_device_mmc(1, &cap9adk_mmc_data); + /* Ethernet */ + at91_add_device_eth(&cap9adk_macb_data); + /* NAND */ + at91_add_device_nand(&cap9adk_nand_data); + /* NOR Flash */ + cap9adk_add_device_nor(); + /* I2C */ + at91_add_device_i2c(NULL, 0); + /* LCD Controller */ + set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH); + at91_add_device_lcdc(&cap9adk_lcdc_data); + /* AC97 */ + at91_add_device_ac97(&cap9adk_ac97_data); +} + +MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") + /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = cap9adk_map_io, + .init_irq = cap9adk_init_irq, + .init_machine = cap9adk_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index d0aa20c9383e..0e2a11fc5bbd 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -25,6 +25,8 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> #include <asm/hardware.h> #include <asm/setup.h> @@ -156,6 +158,85 @@ static struct platform_device csb_flash = { .num_resources = ARRAY_SIZE(csb_flash_resources), }; +/* + * GPIO Buttons (on CSB300) + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button csb300_buttons[] = { + { + .gpio = AT91_PIN_PB29, + .code = BTN_0, + .desc = "sw0", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PB28, + .code = BTN_1, + .desc = "sw1", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PA21, + .code = BTN_2, + .desc = "sw2", + .active_low = 1, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data csb300_button_data = { + .buttons = csb300_buttons, + .nbuttons = ARRAY_SIZE(csb300_buttons), +}; + +static struct platform_device csb300_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &csb300_button_data, + } +}; + +static void __init csb300_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */ + at91_set_deglitch(AT91_PIN_PB29, 1); + at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */ + at91_set_deglitch(AT91_PIN_PB28, 1); + at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */ + at91_set_deglitch(AT91_PIN_PA21, 1); + + platform_device_register(&csb300_button_device); +} +#else +static void __init csb300_add_device_buttons(void) {} +#endif + +static struct gpio_led csb_leds[] = { + { /* "led0", yellow */ + .name = "led0", + .gpio = AT91_PIN_PB2, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* "led1", green */ + .name = "led1", + .gpio = AT91_PIN_PB1, + .active_low = 1, + .default_trigger = "mmc0", + }, + { /* "led2", yellow */ + .name = "led2", + .gpio = AT91_PIN_PB0, + .active_low = 1, + .default_trigger = "ide-disk", + }, +}; + + static void __init csb337_board_init(void) { /* Serial */ @@ -177,6 +258,10 @@ static void __init csb337_board_init(void) at91_add_device_mmc(0, &csb337_mmc_data); /* NOR flash */ platform_device_register(&csb_flash); + /* LEDs */ + at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds)); + /* Switches on CSB300 */ + csb300_add_device_buttons(); } MACHINE_START(CSB337, "Cogent CSB337") diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c index 40c9e4331706..0a897efeba8e 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -183,6 +183,14 @@ static struct platform_device dk_flash = { .num_resources = 1, }; +static struct gpio_led dk_leds[] = { + { + .name = "led0", + .gpio = AT91_PIN_PB2, + .active_low = 1, + .default_trigger = "heartbeat", + } +}; static void __init dk_board_init(void) { @@ -213,6 +221,8 @@ static void __init dk_board_init(void) at91_add_device_nand(&dk_nand_data); /* NOR Flash */ platform_device_register(&dk_flash); + /* LEDs */ + at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds)); /* VGA */ // dk_add_device_video(); } diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c index 53a5ef9e72ee..0574e50a30dd 100644 --- a/arch/arm/mach-at91/board-ek.c +++ b/arch/arm/mach-at91/board-ek.c @@ -141,6 +141,25 @@ static struct platform_device ek_flash = { .num_resources = 1, }; +static struct gpio_led ek_leds[] = { + { /* "user led 1", DS2 */ + .name = "green", + .gpio = AT91_PIN_PB0, + .active_low = 1, + .default_trigger = "mmc0", + }, + { /* "user led 2", DS4 */ + .name = "yellow", + .gpio = AT91_PIN_PB1, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* "user led 3", DS6 */ + .name = "red", + .gpio = AT91_PIN_PB2, + .active_low = 1, + } +}; static void __init ek_board_init(void) { @@ -167,6 +186,8 @@ static void __init ek_board_init(void) #endif /* NOR Flash */ platform_device_register(&ek_flash); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* VGA */ // ek_add_device_video(); } diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 550ae59a3aca..aa29ea58ca09 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -280,6 +280,68 @@ static struct spi_board_info ek_spi_devices[] = { * LCD Controller */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) + +#if defined(CONFIG_FB_ATMEL_STN) + +/* STN */ +static struct fb_videomode at91_stn_modes[] = { + { + .name = "SP06Q002 @ 75", + .refresh = 75, + .xres = 320, .yres = 240, + .pixclock = KHZ2PICOS(1440), + + .left_margin = 1, .right_margin = 1, + .upper_margin = 0, .lower_margin = 0, + .hsync_len = 1, .vsync_len = 1, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs at91fb_default_stn_monspecs = { + .manufacturer = "HIT", + .monitor = "SP06Q002", + + .modedb = at91_stn_modes, + .modedb_len = ARRAY_SIZE(at91_stn_modes), + .hfmin = 15000, + .hfmax = 64000, + .vfmin = 50, + .vfmax = 150, +}; + +#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ + | ATMEL_LCDC_DISTYPE_STNMONO \ + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \ + | ATMEL_LCDC_IFWIDTH_4 \ + | ATMEL_LCDC_SCANMOD_SINGLE) + +static void at91_lcdc_stn_power_control(int on) +{ + /* backlight */ + if (on) { /* power up */ + at91_set_gpio_value(AT91_PIN_PC14, 0); + at91_set_gpio_value(AT91_PIN_PC15, 0); + } else { /* power down */ + at91_set_gpio_value(AT91_PIN_PC14, 1); + at91_set_gpio_value(AT91_PIN_PC15, 1); + } +} + +static struct atmel_lcdfb_info __initdata ek_lcdc_data = { + .default_bpp = 1, + .default_dmacon = ATMEL_LCDC_DMAEN, + .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2, + .default_monspecs = &at91fb_default_stn_monspecs, + .atmel_lcdfb_power_control = at91_lcdc_stn_power_control, + .guard_time = 1, +}; + +#else + +/* TFT */ static struct fb_videomode at91_tft_vga_modes[] = { { .name = "TX09D50VM1CCA @ 60", @@ -296,7 +358,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { }, }; -static struct fb_monspecs at91fb_default_monspecs = { +static struct fb_monspecs at91fb_default_tft_monspecs = { .manufacturer = "HIT", .monitor = "TX09D50VM1CCA", @@ -308,11 +370,11 @@ static struct fb_monspecs at91fb_default_monspecs = { .vfmax = 150, }; -#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ +#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ | ATMEL_LCDC_DISTYPE_TFT \ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) -static void at91_lcdc_power_control(int on) +static void at91_lcdc_tft_power_control(int on) { if (on) at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */ @@ -320,15 +382,15 @@ static void at91_lcdc_power_control(int on) at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */ } -/* Driver datas */ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { .default_bpp = 16, .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2, - .default_monspecs = &at91fb_default_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_power_control, + .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2, + .default_monspecs = &at91fb_default_tft_monspecs, + .atmel_lcdfb_power_control = at91_lcdc_tft_power_control, .guard_time = 1, }; +#endif #else static struct atmel_lcdfb_info __initdata ek_lcdc_data; @@ -342,25 +404,25 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data; static struct gpio_keys_button ek_buttons[] = { { .gpio = AT91_PIN_PA27, - .keycode = BTN_0, + .code = BTN_0, .desc = "Button 0", .active_low = 1, }, { .gpio = AT91_PIN_PA26, - .keycode = BTN_1, + .code = BTN_1, .desc = "Button 1", .active_low = 1, }, { .gpio = AT91_PIN_PA25, - .keycode = BTN_2, + .code = BTN_2, .desc = "Button 2", .active_low = 1, }, { .gpio = AT91_PIN_PA24, - .keycode = BTN_3, + .code = BTN_3, .desc = "Button 3", .active_low = 1, } diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index ab9dcc075454..f09347a86e71 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -27,6 +27,8 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/fb.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <video/atmel_lcdc.h> @@ -163,6 +165,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = { * MACB Ethernet device */ static struct at91_eth_data __initdata ek_macb_data = { + .phy_irq_pin = AT91_PIN_PE31, .is_rmii = 1, }; @@ -264,6 +267,55 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data; /* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button ek_buttons[] = { + { /* BP1, "leftclic" */ + .code = BTN_LEFT, + .gpio = AT91_PIN_PC5, + .active_low = 1, + .desc = "left_click", + .wakeup = 1, + }, + { /* BP2, "rightclic" */ + .code = BTN_RIGHT, + .gpio = AT91_PIN_PC4, + .active_low = 1, + .desc = "right_click", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data ek_button_data = { + .buttons = ek_buttons, + .nbuttons = ARRAY_SIZE(ek_buttons), +}; + +static struct platform_device ek_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_button_data, + } +}; + +static void __init ek_add_device_buttons(void) +{ + at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */ + at91_set_deglitch(AT91_PIN_PC5, 1); + at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */ + at91_set_deglitch(AT91_PIN_PC4, 1); + + platform_device_register(&ek_button_device); +} +#else +static void __init ek_add_device_buttons(void) {} +#endif + + +/* * AC97 */ static struct atmel_ac97_data ek_ac97_data = { @@ -271,6 +323,30 @@ static struct atmel_ac97_data ek_ac97_data = { }; +/* + * LEDs ... these could all be PWM-driven, for variable brightness + */ +static struct gpio_led ek_leds[] = { + { /* "left" led, green, userled1, pwm1 */ + .name = "ds1", + .gpio = AT91_PIN_PB8, + .active_low = 1, + .default_trigger = "mmc0", + }, + { /* "right" led, green, userled2, pwm2 */ + .name = "ds2", + .gpio = AT91_PIN_PC29, + .active_low = 1, + .default_trigger = "nand-disk", + }, + { /* "power" led, yellow, pwm0 */ + .name = "ds3", + .gpio = AT91_PIN_PB7, + .default_trigger = "heartbeat", + }, +}; + + static void __init ek_board_init(void) { /* Serial */ @@ -294,8 +370,12 @@ static void __init ek_board_init(void) at91_add_device_i2c(NULL, 0); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); + /* Push Buttons */ + ek_add_device_buttons(); /* AC97 */ at91_add_device_ac97(&ek_ac97_data); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 57c3b647ce83..ec76eeaafd45 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -574,6 +574,8 @@ int __init at91_clock_init(unsigned long main_clock) } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; + } else if (cpu_is_at91cap9()) { + uhpck.pmc_mask = AT91CAP9_PMC_UHP; } at91_sys_write(AT91_CKGR_PLLBR, 0); diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 77d4c0a37842..b5daf7f5e011 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -15,6 +15,7 @@ extern void __init at91sam9261_initialize(unsigned long main_clock); extern void __init at91sam9263_initialize(unsigned long main_clock); extern void __init at91sam9rl_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); +extern void __init at91cap9_initialize(unsigned long main_clock); /* Interrupts */ extern void __init at91rm9200_init_interrupts(unsigned int priority[]); @@ -23,6 +24,7 @@ extern void __init at91sam9261_init_interrupts(unsigned int priority[]); extern void __init at91sam9263_init_interrupts(unsigned int priority[]); extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); +extern void __init at91cap9_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index aa2d365c93fb..6aeddd68d8af 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -13,6 +13,8 @@ #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/module.h> @@ -414,6 +416,66 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) /*--------------------------------------------------------------------------*/ +#ifdef CONFIG_DEBUG_FS + +static int at91_gpio_show(struct seq_file *s, void *unused) +{ + int bank, j; + + /* print heading */ + seq_printf(s, "Pin\t"); + for (bank = 0; bank < gpio_banks; bank++) { + seq_printf(s, "PIO%c\t", 'A' + bank); + }; + seq_printf(s, "\n\n"); + + /* print pin status */ + for (j = 0; j < 32; j++) { + seq_printf(s, "%i:\t", j); + + for (bank = 0; bank < gpio_banks; bank++) { + unsigned pin = PIN_BASE + (32 * bank) + j; + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (__raw_readl(pio + PIO_PSR) & mask) + seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0"); + else + seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A"); + + seq_printf(s, "\t"); + } + + seq_printf(s, "\n"); + } + + return 0; +} + +static int at91_gpio_open(struct inode *inode, struct file *file) +{ + return single_open(file, at91_gpio_show, NULL); +} + +static const struct file_operations at91_gpio_operations = { + .open = at91_gpio_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init at91_gpio_debugfs_init(void) +{ + /* /sys/kernel/debug/at91_gpio */ + (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations); + return 0; +} +postcore_initcall(at91_gpio_debugfs_init); + +#endif + +/*--------------------------------------------------------------------------*/ + /* * Called from the processor-specific init to enable GPIO interrupt support. */ diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 0d5144973988..9cdcda500fe8 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -14,11 +14,62 @@ #include <linux/init.h> #include <asm/mach-types.h> -#include <asm/leds.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> +/* ------------------------------------------------------------------------- */ + +#if defined(CONFIG_NEW_LEDS) + +#include <linux/platform_device.h> + +/* + * New cross-platform LED support. + */ + +static struct gpio_led_platform_data led_data; + +static struct platform_device at91_leds = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &led_data, +}; + +void __init at91_gpio_leds(struct gpio_led *leds, int nr) +{ + int i; + + if (!nr) + return; + + for (i = 0; i < nr; i++) + at91_set_gpio_output(leds[i].gpio, leds[i].active_low); + + led_data.leds = leds; + led_data.num_leds = nr; + platform_device_register(&at91_leds); +} + +#else +void __init at91_gpio_leds(struct gpio_led *leds, int nr) {} +#endif + + +/* ------------------------------------------------------------------------- */ + +#if defined(CONFIG_LEDS) + +#include <asm/leds.h> + +/* + * Old ARM-specific LED framework; not fully functional when generic time is + * in use. + */ + +static u8 at91_leds_cpu; +static u8 at91_leds_timer; + static inline void at91_led_on(unsigned int led) { at91_set_gpio_value(led, 0); @@ -93,3 +144,18 @@ static int __init leds_init(void) } __initcall(leds_init); + + +void __init at91_init_leds(u8 cpu_led, u8 timer_led) +{ + /* Enable GPIO to access the LEDs */ + at91_set_gpio_output(cpu_led, 1); + at91_set_gpio_output(timer_led, 1); + + at91_leds_cpu = cpu_led; + at91_leds_timer = timer_led; +} + +#else +void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +#endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 98cb61482917..4b120cc36135 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -80,6 +80,11 @@ static int at91_pm_verify_clocks(void) pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); return 0; } + } else if (cpu_is_at91cap9()) { + if ((scsr & AT91CAP9_PMC_UHP) != 0) { + pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); + return 0; + } } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c index f428af7545b4..e5dc33f1f95c 100644 --- a/arch/arm/mach-clps711x/time.c +++ b/arch/arm/mach-clps711x/time.c @@ -50,9 +50,7 @@ static unsigned long clps711x_gettimeoffset(void) static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); timer_tick(); - write_sequnlock(&xtime_lock); return IRQ_HANDLED; } diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index 986205ec9269..2ac63671ea5f 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -298,8 +298,6 @@ extern unsigned long ioc_timer_gettimeoffset(void); static irqreturn_t clps7500_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - timer_tick(); /* Why not using do_leds interface?? */ @@ -313,8 +311,6 @@ clps7500_timer_interrupt(int irq, void *dev_id) } } - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 8c1b5690dfe8..7710e14b5268 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -178,8 +178,6 @@ ebsa110_timer_interrupt(int irq, void *dev_id) { u32 count; - write_seqlock(&xtime_lock); - /* latch and read timer 1 */ __raw_writeb(0x40, PIT_CTRL); count = __raw_readb(PIT_T1); @@ -192,8 +190,6 @@ ebsa110_timer_interrupt(int irq, void *dev_id) timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 70b2c7801110..91f6a07a51d5 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -3,6 +3,7 @@ * Core routines for Cirrus EP93xx chips. * * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> * * Thanks go to Michael Burian and Ray Lehtiniemi for their key * role in the ep93xx linux community. @@ -21,7 +22,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/bitops.h> -#include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/device.h> @@ -99,8 +99,6 @@ static unsigned int last_jiffy_time; static int ep93xx_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - __raw_writel(1, EP93XX_TIMER1_CLEAR); while ((signed long) (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time) @@ -109,8 +107,6 @@ static int ep93xx_timer_interrupt(int irq, void *dev_id) timer_tick(); } - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } @@ -157,38 +153,41 @@ static unsigned char gpio_int_enabled[3]; static unsigned char gpio_int_type1[3]; static unsigned char gpio_int_type2[3]; -static void update_gpio_int_params(int abf) +/* Port ordering is: A B F */ +static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; +static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; +static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; +static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x5c }; + +static void update_gpio_int_params(unsigned port) { - if (abf == 0) { - __raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE); - __raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2); - __raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1); - __raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE); - } else if (abf == 1) { - __raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE); - __raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2); - __raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1); - __raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE); - } else if (abf == 2) { - __raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE); - __raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2); - __raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1); - __raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE); - } else { - BUG(); - } -} + BUG_ON(port > 2); + __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port])); -static unsigned char data_register_offset[8] = { - 0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40, + __raw_writeb(gpio_int_type2[port], + EP93XX_GPIO_REG(int_type2_register_offset[port])); + + __raw_writeb(gpio_int_type1[port], + EP93XX_GPIO_REG(int_type1_register_offset[port])); + + __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], + EP93XX_GPIO_REG(int_en_register_offset[port])); +} + +/* Port ordering is: A B F D E C G H */ +static const u8 data_register_offset[8] = { + 0x00, 0x04, 0x30, 0x0c, 0x20, 0x08, 0x38, 0x40, }; -static unsigned char data_direction_register_offset[8] = { - 0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44, +static const u8 data_direction_register_offset[8] = { + 0x10, 0x14, 0x34, 0x1c, 0x24, 0x18, 0x3c, 0x44, }; -void gpio_line_config(int line, int direction) +#define GPIO_IN 0 +#define GPIO_OUT 1 + +static void ep93xx_gpio_set_direction(unsigned line, int direction) { unsigned int data_direction_register; unsigned long flags; @@ -199,14 +198,10 @@ void gpio_line_config(int line, int direction) local_irq_save(flags); if (direction == GPIO_OUT) { - if (line >= 0 && line < 16) { - /* Port A/B. */ + if (line >= 0 && line <= EP93XX_GPIO_LINE_MAX_IRQ) { + /* Port A/B/F */ gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); update_gpio_int_params(line >> 3); - } else if (line >= 40 && line < 48) { - /* Port F. */ - gpio_int_unmasked[2] &= ~(1 << (line & 7)); - update_gpio_int_params(2); } v = __raw_readb(data_direction_register); @@ -219,39 +214,58 @@ void gpio_line_config(int line, int direction) } local_irq_restore(flags); } -EXPORT_SYMBOL(gpio_line_config); -int gpio_line_get(int line) +int gpio_direction_input(unsigned gpio) +{ + if (gpio > EP93XX_GPIO_LINE_MAX) + return -EINVAL; + + ep93xx_gpio_set_direction(gpio, GPIO_IN); + + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + +int gpio_direction_output(unsigned gpio, int value) +{ + if (gpio > EP93XX_GPIO_LINE_MAX) + return -EINVAL; + + gpio_set_value(gpio, value); + ep93xx_gpio_set_direction(gpio, GPIO_OUT); + + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + +int gpio_get_value(unsigned gpio) { unsigned int data_register; - data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]); + data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]); - return !!(__raw_readb(data_register) & (1 << (line & 7))); + return !!(__raw_readb(data_register) & (1 << (gpio & 7))); } -EXPORT_SYMBOL(gpio_line_get); +EXPORT_SYMBOL(gpio_get_value); -void gpio_line_set(int line, int value) +void gpio_set_value(unsigned gpio, int value) { unsigned int data_register; unsigned long flags; unsigned char v; - data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]); + data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]); local_irq_save(flags); - if (value == EP93XX_GPIO_HIGH) { - v = __raw_readb(data_register); - v |= 1 << (line & 7); - __raw_writeb(v, data_register); - } else if (value == EP93XX_GPIO_LOW) { - v = __raw_readb(data_register); - v &= ~(1 << (line & 7)); - __raw_writeb(v, data_register); - } + v = __raw_readb(data_register); + if (value) + v |= 1 << (gpio & 7); + else + v &= ~(1 << (gpio & 7)); + __raw_writeb(v, data_register); local_irq_restore(flags); } -EXPORT_SYMBOL(gpio_line_set); +EXPORT_SYMBOL(gpio_set_value); /************************************************************************* @@ -265,47 +279,67 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); for (i = 0; i < 8; i++) { if (status & (1 << i)) { - desc = irq_desc + IRQ_EP93XX_GPIO(0) + i; - desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc); + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; + desc = irq_desc + gpio_irq; + desc_handle_irq(gpio_irq, desc); } } status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); for (i = 0; i < 8; i++) { if (status & (1 << i)) { - desc = irq_desc + IRQ_EP93XX_GPIO(8) + i; - desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc); + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; + desc = irq_desc + gpio_irq; + desc_handle_irq(gpio_irq, desc); } } } static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) { - int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4); + /* + * map discontiguous hw irq range to continous sw irq range: + * + * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) + */ + int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; desc_handle_irq(gpio_irq, irq_desc + gpio_irq); } +static void ep93xx_gpio_irq_ack(unsigned int irq) +{ + int line = irq_to_gpio(irq); + int port = line >> 3; + int port_mask = 1 << (line & 7); + + if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { + gpio_int_type2[port] ^= port_mask; /* switch edge direction */ + update_gpio_int_params(port); + } + + __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); +} + static void ep93xx_gpio_irq_mask_ack(unsigned int irq) { - int line = irq - IRQ_EP93XX_GPIO(0); + int line = irq_to_gpio(irq); int port = line >> 3; + int port_mask = 1 << (line & 7); - gpio_int_unmasked[port] &= ~(1 << (line & 7)); + if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) + gpio_int_type2[port] ^= port_mask; /* switch edge direction */ + + gpio_int_unmasked[port] &= ~port_mask; update_gpio_int_params(port); - if (port == 0) { - __raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK); - } else if (port == 1) { - __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK); - } else if (port == 2) { - __raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK); - } + __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); } static void ep93xx_gpio_irq_mask(unsigned int irq) { - int line = irq - IRQ_EP93XX_GPIO(0); + int line = irq_to_gpio(irq); int port = line >> 3; gpio_int_unmasked[port] &= ~(1 << (line & 7)); @@ -314,7 +348,7 @@ static void ep93xx_gpio_irq_mask(unsigned int irq) static void ep93xx_gpio_irq_unmask(unsigned int irq) { - int line = irq - IRQ_EP93XX_GPIO(0); + int line = irq_to_gpio(irq); int port = line >> 3; gpio_int_unmasked[port] |= 1 << (line & 7); @@ -329,38 +363,54 @@ static void ep93xx_gpio_irq_unmask(unsigned int irq) */ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) { - int port; - int line; - - line = irq - IRQ_EP93XX_GPIO(0); - if (line >= 0 && line < 16) { - gpio_line_config(line, GPIO_IN); - } else { - gpio_line_config(EP93XX_GPIO_LINE_F(line-16), GPIO_IN); + struct irq_desc *desc = irq_desc + irq; + const int gpio = irq_to_gpio(irq); + const int port = gpio >> 3; + const int port_mask = 1 << (gpio & 7); + + ep93xx_gpio_set_direction(gpio, GPIO_IN); + + switch (type) { + case IRQT_RISING: + gpio_int_type1[port] |= port_mask; + gpio_int_type2[port] |= port_mask; + desc->handle_irq = handle_edge_irq; + break; + case IRQT_FALLING: + gpio_int_type1[port] |= port_mask; + gpio_int_type2[port] &= ~port_mask; + desc->handle_irq = handle_edge_irq; + break; + case IRQT_HIGH: + gpio_int_type1[port] &= ~port_mask; + gpio_int_type2[port] |= port_mask; + desc->handle_irq = handle_level_irq; + break; + case IRQT_LOW: + gpio_int_type1[port] &= ~port_mask; + gpio_int_type2[port] &= ~port_mask; + desc->handle_irq = handle_level_irq; + break; + case IRQT_BOTHEDGE: + gpio_int_type1[port] |= port_mask; + /* set initial polarity based on current input level */ + if (gpio_get_value(gpio)) + gpio_int_type2[port] &= ~port_mask; /* falling */ + else + gpio_int_type2[port] |= port_mask; /* rising */ + desc->handle_irq = handle_edge_irq; + break; + default: + pr_err("ep93xx: failed to set irq type %d for gpio %d\n", + type, gpio); + return -EINVAL; } - port = line >> 3; - line &= 7; - - if (type & IRQT_RISING) { - gpio_int_enabled[port] |= 1 << line; - gpio_int_type1[port] |= 1 << line; - gpio_int_type2[port] |= 1 << line; - } else if (type & IRQT_FALLING) { - gpio_int_enabled[port] |= 1 << line; - gpio_int_type1[port] |= 1 << line; - gpio_int_type2[port] &= ~(1 << line); - } else if (type & IRQT_HIGH) { - gpio_int_enabled[port] |= 1 << line; - gpio_int_type1[port] &= ~(1 << line); - gpio_int_type2[port] |= 1 << line; - } else if (type & IRQT_LOW) { - gpio_int_enabled[port] |= 1 << line; - gpio_int_type1[port] &= ~(1 << line); - gpio_int_type2[port] &= ~(1 << line); - } else { - gpio_int_enabled[port] &= ~(1 << line); - } + gpio_int_enabled[port] |= port_mask; + + desc->status &= ~IRQ_TYPE_SENSE_MASK; + desc->status |= type & IRQ_TYPE_SENSE_MASK; + update_gpio_int_params(port); return 0; @@ -368,7 +418,8 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) static struct irq_chip ep93xx_gpio_irq_chip = { .name = "GPIO", - .ack = ep93xx_gpio_irq_mask_ack, + .ack = ep93xx_gpio_irq_ack, + .mask_ack = ep93xx_gpio_irq_mask_ack, .mask = ep93xx_gpio_irq_mask, .unmask = ep93xx_gpio_irq_unmask, .set_type = ep93xx_gpio_irq_type, @@ -377,15 +428,16 @@ static struct irq_chip ep93xx_gpio_irq_chip = { void __init ep93xx_init_irq(void) { - int irq; + int gpio_irq; vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK); vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK); - for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) { - set_irq_chip(irq, &ep93xx_gpio_irq_chip); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); + for (gpio_irq = gpio_to_irq(0); + gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { + set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip); + set_irq_handler(gpio_irq, handle_level_irq); + set_irq_flags(gpio_irq, IRQF_VALID); } set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler); diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index 3a63941d43be..b2a21189dd81 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -30,14 +30,10 @@ static unsigned long timer1_gettimeoffset (void) static irqreturn_t timer1_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - *CSR_TIMER1_CLR = 0; timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c index d08d64139d00..a764e01d3573 100644 --- a/arch/arm/mach-footbridge/isa-timer.c +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -64,9 +64,7 @@ static unsigned long isa_gettimeoffset(void) static irqreturn_t isa_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); timer_tick(); - write_sequnlock(&xtime_lock); return IRQ_HANDLED; } diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c index 9107b8e2ad6e..c2a431f482f0 100644 --- a/arch/arm/mach-h720x/cpu-h7201.c +++ b/arch/arm/mach-h720x/cpu-h7201.c @@ -29,13 +29,9 @@ static irqreturn_t h7201_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - CPU_REG (TIMER_VIRT, TIMER_TOPSTAT); timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c index 0a1a25fb8ba8..c627fa124eb3 100644 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ b/arch/arm/mach-h720x/cpu-h7202.c @@ -113,9 +113,7 @@ h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask = CPU_REG (TIMER_VIRT, TIMER_TOPSTAT); if ( mask & TSTAT_T0INT ) { - write_seqlock(&xtime_lock); timer_tick(); - write_sequnlock(&xtime_lock); if( mask == TSTAT_T0INT ) return; } diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index e9c82deb791d..7fbbc17f8e8b 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -250,8 +250,6 @@ unsigned long integrator_gettimeoffset(void) static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - /* * clear the interrupt */ @@ -259,8 +257,6 @@ integrator_timer_interrupt(int irq, void *dev_id) timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index d4d8134ce567..d55fa4e9bb43 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -440,7 +440,7 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) return 1; } -static irqreturn_t v3_irq(int irq, void *devid) +static irqreturn_t v3_irq(int dummy, void *devid) { #ifdef CONFIG_DEBUG_LL struct pt_regs *regs = get_irq_regs(); @@ -448,8 +448,10 @@ static irqreturn_t v3_irq(int irq, void *devid) unsigned long instr = *(unsigned long *)pc; char buf[128]; - sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", irq, - pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255, + sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " + "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, + __raw_readl(SC_LBFADDR), + __raw_readl(SC_LBFCODE) & 255, v3_readb(V3_LB_ISTAT)); printascii(buf); #endif diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 2b086ab2668c..74c65ce221de 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -3,7 +3,7 @@ * * Board support code for the GLAN Tank. * - * Copyright (C) 2006 Martin Michlmayr <tbm@cyrius.com> + * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com> * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> * * This program is free software; you can redistribute it and/or modify it @@ -21,6 +21,7 @@ #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> +#include <linux/i2c.h> #include <linux/platform_device.h> #include <asm/hardware.h> #include <asm/io.h> @@ -118,7 +119,7 @@ subsys_initcall(glantank_pci_init); * GLAN Tank machine initialization. */ static struct physmap_flash_data glantank_flash_data = { - .width = 1, + .width = 2, }; static struct resource glantank_flash_resource = { @@ -166,6 +167,13 @@ static struct platform_device glantank_serial_device = { .resource = &glantank_uart_resource, }; +static struct i2c_board_info __initdata glantank_i2c_devices[] = { + { + I2C_BOARD_INFO("rtc-rs5c372", 0x32), + .type = "rs5c372a", + }, +}; + static void glantank_power_off(void) { __raw_writeb(0x01, 0xfe8d0004); @@ -183,6 +191,9 @@ static void __init glantank_init_machine(void) platform_device_register(&iop3xx_dma_0_channel); platform_device_register(&iop3xx_dma_1_channel); + i2c_register_board_info(0, glantank_i2c_devices, + ARRAY_SIZE(glantank_i2c_devices)); + pm_power_off = glantank_power_off; } diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index cb6ad211887a..81cdc8267206 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -206,8 +206,6 @@ unsigned long ixp2000_gettimeoffset (void) static int ixp2000_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - /* clear timer 1 */ ixp2000_reg_wrb(IXP2000_T1_CLR, 1); @@ -217,8 +215,6 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id) next_jiffy_time -= ticks_per_jiffy; } - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index 16356ffc86ae..5fea5a132939 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -22,7 +22,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/bitops.h> -#include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/device.h> diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c index 7a85ced56718..d3a779a7a35f 100644 --- a/arch/arm/mach-ixp23xx/espresso.c +++ b/arch/arm/mach-ixp23xx/espresso.c @@ -19,7 +19,6 @@ #include <linux/tty.h> #include <linux/bitops.h> #include <linux/ioport.h> -#include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/device.h> @@ -40,7 +39,6 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/arch.h> -#include <asm/mach/irq.h> #include <asm/mach/pci.h> static int __init espresso_pci_init(void) diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index c41a6b5a0acc..5c5d4d66dee8 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -24,7 +24,6 @@ #include <linux/tty.h> #include <linux/bitops.h> #include <linux/ioport.h> -#include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/device.h> @@ -44,7 +43,6 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/arch.h> -#include <asm/mach/irq.h> #include <asm/mach/pci.h> /* diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index e35644961aa4..f0f70ba1e46d 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -23,7 +23,6 @@ #include <linux/tty.h> #include <linux/bitops.h> #include <linux/ioport.h> -#include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/device.h> @@ -44,7 +43,6 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/arch.h> -#include <asm/mach/irq.h> #include <asm/mach/pci.h> /* diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c index acd71e9c38a7..6f10dc208320 100644 --- a/arch/arm/mach-ixp4xx/nslu2-power.c +++ b/arch/arm/mach-ixp4xx/nslu2-power.c @@ -21,7 +21,6 @@ #include <linux/reboot.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/reboot.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index 2a07a281fa8a..730a3af12c98 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -9,7 +9,7 @@ obj-n := obj- := # PCI support is optional -#obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_PCI) += pci.o # Board-specific support obj-$(CONFIG_MACH_KS8695) += board-micrel.o diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index 2feeef81d843..05ac2bd04020 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -40,7 +40,7 @@ static void __init micrel_init(void) printk(KERN_INFO "Micrel KS8695 Development Board initializing\n"); #ifdef CONFIG_PCI -// ks8695_init_pci(&micrel_pci); + ks8695_init_pci(&micrel_pci); #endif /* Add devices */ diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c index b1aa3cb3d4a3..5e46191c0af9 100644 --- a/arch/arm/mach-ks8695/gpio.c +++ b/arch/arm/mach-ks8695/gpio.c @@ -20,6 +20,8 @@ #include <linux/kernel.h> #include <linux/mm.h> #include <linux/init.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> #include <linux/module.h> #include <asm/io.h> @@ -216,3 +218,84 @@ int irq_to_gpio(unsigned int irq) return (irq - KS8695_IRQ_EXTERN0); } EXPORT_SYMBOL(irq_to_gpio); + + +/* .... Debug interface ..................................................... */ + +#ifdef CONFIG_DEBUG_FS + +static int ks8695_gpio_show(struct seq_file *s, void *unused) +{ + unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN }; + unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM }; + unsigned long mode, ctrl, data; + int i; + + mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); + ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); + data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); + + seq_printf(s, "Pin\tI/O\tFunction\tState\n\n"); + + for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) { + seq_printf(s, "%i:\t", i); + + seq_printf(s, "%s\t", (mode & IOPM_(i)) ? "Output" : "Input"); + + if (i <= KS8695_GPIO_3) { + if (ctrl & enable[i]) { + seq_printf(s, "EXT%i ", i); + + switch ((ctrl & intmask[i]) >> (4 * i)) { + case IOPC_TM_LOW: + seq_printf(s, "(Low)"); break; + case IOPC_TM_HIGH: + seq_printf(s, "(High)"); break; + case IOPC_TM_RISING: + seq_printf(s, "(Rising)"); break; + case IOPC_TM_FALLING: + seq_printf(s, "(Falling)"); break; + case IOPC_TM_EDGE: + seq_printf(s, "(Edges)"); break; + } + } + else + seq_printf(s, "GPIO\t"); + } + else if (i <= KS8695_GPIO_5) { + if (ctrl & enable[i]) + seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4); + else + seq_printf(s, "GPIO\t"); + } + else + seq_printf(s, "GPIO\t"); + + seq_printf(s, "\t"); + + seq_printf(s, "%i\n", (data & IOPD_(i)) ? 1 : 0); + } + return 0; +} + +static int ks8695_gpio_open(struct inode *inode, struct file *file) +{ + return single_open(file, ks8695_gpio_show, NULL); +} + +static const struct file_operations ks8695_gpio_operations = { + .open = ks8695_gpio_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init ks8695_gpio_debugfs_init(void) +{ + /* /sys/kernel/debug/ks8695_gpio */ + (void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations); + return 0; +} +postcore_initcall(ks8695_gpio_debugfs_init); + +#endif diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c new file mode 100644 index 000000000000..3f4e0330cb1a --- /dev/null +++ b/arch/arm/mach-ks8695/pci.c @@ -0,0 +1,326 @@ +/* + * arch/arm/mach-ks8695/pci.c + * + * Copyright (C) 2003, Micrel Semiconductors + * Copyright (C) 2006, Greg Ungerer <gerg@snapgear.com> + * Copyright (C) 2006, Ben Dooks + * Copyright (C) 2007, Andrew Victor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/delay.h> + +#include <asm/io.h> +#include <asm/signal.h> +#include <asm/mach/pci.h> +#include <asm/hardware.h> + +#include <asm/arch/devices.h> +#include <asm/arch/regs-pci.h> + + +static int pci_dbg; +static int pci_cfg_dbg; + + +static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsigned int where) +{ + unsigned long pbca; + + pbca = PBCA_ENABLE | (where & ~3); + pbca |= PCI_SLOT(devfn) << 11 ; + pbca |= PCI_FUNC(devfn) << 8; + pbca |= bus_nr << 16; + + if (bus_nr == 0) { + /* use Type-0 transaction */ + __raw_writel(pbca, KS8695_PCI_VA + KS8695_PBCA); + } else { + /* use Type-1 transaction */ + __raw_writel(pbca | PBCA_TYPE1, KS8695_PCI_VA + KS8695_PBCA); + } +} + + +/* + * The KS8695 datasheet prohibits anything other than 32bit accesses + * to the IO registers, so all our configuration must be done with + * 32bit operations, and the correct bit masking and shifting. + */ + +static int ks8695_pci_readconfig(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 *value) +{ + ks8695_pci_setupconfig(bus->number, devfn, where); + + *value = __raw_readl(KS8695_PCI_VA + KS8695_PBCD); + + switch (size) { + case 4: + break; + case 2: + *value = *value >> ((where & 2) * 8); + *value &= 0xffff; + break; + case 1: + *value = *value >> ((where & 3) * 8); + *value &= 0xff; + break; + } + + if (pci_cfg_dbg) { + printk("read: %d,%08x,%02x,%d: %08x (%08x)\n", + bus->number, devfn, where, size, *value, + __raw_readl(KS8695_PCI_VA + KS8695_PBCD)); + } + + return PCIBIOS_SUCCESSFUL; +} + +static int ks8695_pci_writeconfig(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 value) +{ + unsigned long tmp; + + if (pci_cfg_dbg) { + printk("write: %d,%08x,%02x,%d: %08x\n", + bus->number, devfn, where, size, value); + } + + ks8695_pci_setupconfig(bus->number, devfn, where); + + switch (size) { + case 4: + __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD); + break; + case 2: + tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD); + tmp &= ~(0xffff << ((where & 2) * 8)); + tmp |= value << ((where & 2) * 8); + + __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD); + break; + case 1: + tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD); + tmp &= ~(0xff << ((where & 3) * 8)); + tmp |= value << ((where & 3) * 8); + + __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static void ks8695_local_writeconfig(int where, u32 value) +{ + ks8695_pci_setupconfig(0, 0, where); + __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD); +} + +static struct pci_ops ks8695_pci_ops = { + .read = ks8695_pci_readconfig, + .write = ks8695_pci_writeconfig, +}; + +static struct pci_bus *ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys); +} + +static struct resource pci_mem = { + .name = "PCI Memory space", + .start = KS8695_PCIMEM_PA, + .end = KS8695_PCIMEM_PA + (KS8695_PCIMEM_SIZE - 1), + .flags = IORESOURCE_MEM, +}; + +static struct resource pci_io = { + .name = "PCI IO space", + .start = KS8695_PCIIO_PA, + .end = KS8695_PCIIO_PA + (KS8695_PCIIO_SIZE - 1), + .flags = IORESOURCE_IO, +}; + +static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys) +{ + if (nr > 0) + return 0; + + request_resource(&iomem_resource, &pci_mem); + request_resource(&ioport_resource, &pci_io); + + sys->resource[0] = &pci_io; + sys->resource[1] = &pci_mem; + sys->resource[2] = NULL; + + /* Assign and enable processor bridge */ + ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA); + + /* Enable bus-master & Memory Space access */ + ks8695_local_writeconfig(PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + + /* Set cache-line size & latency. */ + ks8695_local_writeconfig(PCI_CACHE_LINE_SIZE, (32 << 8) | (L1_CACHE_BYTES / sizeof(u32))); + + /* Reserve PCI memory space for PCI-AHB resources */ + if (!request_mem_region(KS8695_PCIMEM_PA, SZ_64M, "PCI-AHB Bridge")) { + printk(KERN_ERR "Cannot allocate PCI-AHB Bridge memory.\n"); + return -EBUSY; + } + + return 1; +} + +static inline unsigned int size_mask(unsigned long size) +{ + return (~size) + 1; +} + +static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + unsigned long instr = *(unsigned long *)pc; + unsigned long cmdstat; + + cmdstat = __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS); + + printk(KERN_ERR "PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx [%s%s%s%s%s]\n", + addr, fsr, regs->ARM_pc, regs->ARM_lr, + cmdstat & (PCI_STATUS_SIG_TARGET_ABORT << 16) ? "GenTarget" : " ", + cmdstat & (PCI_STATUS_REC_TARGET_ABORT << 16) ? "RecvTarget" : " ", + cmdstat & (PCI_STATUS_REC_MASTER_ABORT << 16) ? "MasterAbort" : " ", + cmdstat & (PCI_STATUS_SIG_SYSTEM_ERROR << 16) ? "SysError" : " ", + cmdstat & (PCI_STATUS_DETECTED_PARITY << 16) ? "Parity" : " " + ); + + __raw_writel(cmdstat, KS8695_PCI_VA + KS8695_CRCFCS); + + /* + * If the instruction being executed was a read, + * make it look like it read all-ones. + */ + if ((instr & 0x0c100000) == 0x04100000) { + int reg = (instr >> 12) & 15; + unsigned long val; + + if (instr & 0x00400000) + val = 255; + else + val = -1; + + regs->uregs[reg] = val; + regs->ARM_pc += 4; + return 0; + } + + if ((instr & 0x0e100090) == 0x00100090) { + int reg = (instr >> 12) & 15; + + regs->uregs[reg] = -1; + regs->ARM_pc += 4; + return 0; + } + + return 1; +} + +static void __init ks8695_pci_preinit(void) +{ + /* stage 1 initialization, subid, subdevice = 0x0001 */ + __raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID); + + /* stage 2 initialization */ + /* prefetch limits with 16 words, retry enable */ + __raw_writel(0x40000000, KS8695_PCI_VA + KS8695_PBCS); + + /* configure memory mapping */ + __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBA); + __raw_writel(size_mask(KS8695_PCIMEM_SIZE), KS8695_PCI_VA + KS8695_PMBAM); + __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBAT); + __raw_writel(0, KS8695_PCI_VA + KS8695_PMBAC); + + /* configure IO mapping */ + __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBA); + __raw_writel(size_mask(KS8695_PCIIO_SIZE), KS8695_PCI_VA + KS8695_PIOBAM); + __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBAT); + __raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC); + + /* hook in fault handlers */ + hook_fault_code(8, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch"); + hook_fault_code(10, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch"); +} + +static void ks8695_show_pciregs(void) +{ + if (!pci_dbg) + return; + + printk(KERN_INFO "PCI: CRCFID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFID)); + printk(KERN_INFO "PCI: CRCFCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS)); + printk(KERN_INFO "PCI: CRCFRV = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFRV)); + printk(KERN_INFO "PCI: CRCFLT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFLT)); + printk(KERN_INFO "PCI: CRCBMA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCBMA)); + printk(KERN_INFO "PCI: CRCSID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCSID)); + printk(KERN_INFO "PCI: CRCFIT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFIT)); + + printk(KERN_INFO "PCI: PBM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBM)); + printk(KERN_INFO "PCI: PBCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBCS)); + + printk(KERN_INFO "PCI: PMBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBA)); + printk(KERN_INFO "PCI: PMBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAC)); + printk(KERN_INFO "PCI: PMBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAM)); + printk(KERN_INFO "PCI: PMBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAT)); + + printk(KERN_INFO "PCI: PIOBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBA)); + printk(KERN_INFO "PCI: PIOBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAC)); + printk(KERN_INFO "PCI: PIOBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAM)); + printk(KERN_INFO "PCI: PIOBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAT)); +} + + +static struct hw_pci ks8695_pci __initdata = { + .nr_controllers = 1, + .preinit = ks8695_pci_preinit, + .setup = ks8695_pci_setup, + .scan = ks8695_pci_scan_bus, + .postinit = NULL, + .swizzle = pci_std_swizzle, + .map_irq = NULL, +}; + +void __init ks8695_init_pci(struct ks8695_pci_cfg *cfg) +{ + if (__raw_readl(KS8695_PCI_VA + KS8695_CRCFRV) & CFRV_GUEST) { + printk("PCI: KS8695 in guest mode, not initialising\n"); + return; + } + + printk(KERN_INFO "PCI: Initialising\n"); + ks8695_show_pciregs(); + + /* set Mode */ + __raw_writel(cfg->mode << 29, KS8695_PCI_VA + KS8695_PBM); + + ks8695_pci.map_irq = cfg->map_irq; /* board-specific map_irq method */ + + pci_common_init(&ks8695_pci); +} diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c index d2c86e4a72eb..02f766b3121d 100644 --- a/arch/arm/mach-ks8695/time.c +++ b/arch/arm/mach-ks8695/time.c @@ -70,10 +70,7 @@ static unsigned long ks8695_gettimeoffset (void) */ static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c index c25316d02537..e50e60b33851 100644 --- a/arch/arm/mach-lh7a40x/time.c +++ b/arch/arm/mach-lh7a40x/time.c @@ -41,13 +41,9 @@ static irqreturn_t lh7a40x_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - TIMER_EOI = 0; timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig new file mode 100644 index 000000000000..3553babbbf05 --- /dev/null +++ b/arch/arm/mach-msm/Kconfig @@ -0,0 +1,18 @@ +if ARCH_MSM7X00A + +comment "MSM7X00A Board Type" + depends on ARCH_MSM7X00A + +config MACH_HALIBUT + depends on ARCH_MSM7X00A + default y + bool "Halibut Board (QCT SURF7200A)" + help + Support for the Qualcomm SURF7200A eval board. + +config MSM7X00A_IDLE + depends on ARCH_MSM7X00A + default y + bool "Idle Support for MSM7X00A" + +endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile new file mode 100644 index 000000000000..d12f23655850 --- /dev/null +++ b/arch/arm/mach-msm/Makefile @@ -0,0 +1,7 @@ +obj-y += io.o idle.o irq.o timer.o dma.o + +# Common code for board init +obj-y += common.o + +obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o + diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot new file mode 100644 index 000000000000..24dfbf8c07c4 --- /dev/null +++ b/arch/arm/mach-msm/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x10008000 +params_phys-y := 0x10000100 +initrd_phys-y := 0x10800000 diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c new file mode 100644 index 000000000000..86dfb2b5261c --- /dev/null +++ b/arch/arm/mach-msm/board-halibut.c @@ -0,0 +1,114 @@ +/* linux/arch/arm/mach-msm/board-halibut.c + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/input.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <asm/arch/board.h> +#include <asm/arch/msm_iomap.h> + +#include <asm/io.h> +#include <asm/delay.h> + +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x9C004300, + .end = 0x9C004400, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSM_GPIO_TO_INT(49), + .end = MSM_GPIO_TO_INT(49), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static void mddi0_panel_power(int on) +{ +} + +static struct msm_mddi_platform_data msm_mddi0_pdata = { + .panel_power = mddi0_panel_power, + .has_vsync_irq = 0, +}; + +static struct platform_device msm_mddi0_device = { + .name = "msm_mddi", + .id = 0, + .dev = { + .platform_data = &msm_mddi0_pdata + }, +}; + +static struct platform_device msm_serial0_device = { + .name = "msm_serial", + .id = 0, +}; + +static struct platform_device *devices[] __initdata = { + &msm_serial0_device, + &msm_mddi0_device, + &smc91x_device, +}; + +extern struct sys_timer msm_timer; + +static void __init halibut_init_irq(void) +{ + msm_init_irq(); +} + +static void __init halibut_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); + msm_add_devices(); +} + +static void __init halibut_map_io(void) +{ + msm_map_common_io(); +} + +MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") + +/* UART for LL DEBUG */ + .phys_io = MSM_UART1_PHYS, + .io_pg_offst = ((MSM_UART1_BASE) >> 18) & 0xfffc, + + .boot_params = 0x10000100, + .map_io = halibut_map_io, + .init_irq = halibut_init_irq, + .init_machine = halibut_init, + .timer = &msm_timer, +MACHINE_END diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c new file mode 100644 index 000000000000..3f5d3362f887 --- /dev/null +++ b/arch/arm/mach-msm/common.c @@ -0,0 +1,116 @@ +/* linux/arch/arm/mach-msm/common.c + * + * Common setup code for MSM7K Boards + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach/flash.h> +#include <asm/io.h> + +#include <asm/setup.h> + +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +#include <asm/arch/msm_iomap.h> + +#include <asm/arch/board.h> + +struct flash_platform_data msm_nand_data = { + .parts = 0, + .nr_parts = 0, +}; + +static struct resource msm_nand_resources[] = { + [0] = { + .start = 7, + .end = 7, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device msm_nand_device = { + .name = "msm_nand", + .id = -1, + .num_resources = ARRAY_SIZE(msm_nand_resources), + .resource = msm_nand_resources, + .dev = { + .platform_data = &msm_nand_data, + }, +}; + +static struct platform_device msm_smd_device = { + .name = "msm_smd", + .id = -1, +}; + +static struct resource msm_i2c_resources[] = { + { + .start = MSM_I2C_BASE, + .end = MSM_I2C_BASE + MSM_I2C_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_PWB_I2C, + .end = INT_PWB_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device msm_i2c_device = { + .name = "msm_i2c", + .id = 0, + .num_resources = ARRAY_SIZE(msm_i2c_resources), + .resource = msm_i2c_resources, +}; + +static struct resource usb_resources[] = { + { + .start = MSM_HSUSB_PHYS, + .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_USB_HS, + .end = INT_USB_HS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device msm_hsusb_device = { + .name = "msm_hsusb", + .id = -1, + .num_resources = ARRAY_SIZE(usb_resources), + .resource = usb_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +static struct platform_device *devices[] __initdata = { + &msm_nand_device, + &msm_smd_device, + &msm_i2c_device, + &msm_hsusb_device, +}; + +void __init msm_add_devices(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); +} diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c new file mode 100644 index 000000000000..8b0f339b3274 --- /dev/null +++ b/arch/arm/mach-msm/dma.c @@ -0,0 +1,214 @@ +/* linux/arch/arm/mach-msm/dma.c + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <asm/io.h> +#include <linux/interrupt.h> +#include <asm/arch/dma.h> + +#define MSM_DMOV_CHANNEL_COUNT 16 + +enum { + MSM_DMOV_PRINT_ERRORS = 1, + MSM_DMOV_PRINT_IO = 2, + MSM_DMOV_PRINT_FLOW = 4 +}; + +static DEFINE_SPINLOCK(msm_dmov_lock); +static struct msm_dmov_cmd active_command; +static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT]; +static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT]; +unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS; + +#define MSM_DMOV_DPRINTF(mask, format, args...) \ + do { \ + if ((mask) & msm_dmov_print_mask) \ + printk(KERN_ERR format, args); \ + } while (0) +#define PRINT_ERROR(format, args...) \ + MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_ERRORS, format, args); +#define PRINT_IO(format, args...) \ + MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_IO, format, args); +#define PRINT_FLOW(format, args...) \ + MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args); + +void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) +{ + unsigned long irq_flags; + unsigned int status; + + spin_lock_irqsave(&msm_dmov_lock, irq_flags); + status = readl(DMOV_STATUS(id)); + if (list_empty(&ready_commands[id]) && + (status & DMOV_STATUS_CMD_PTR_RDY)) { +#if 0 + if (list_empty(&active_commands[id])) { + PRINT_FLOW("msm_dmov_enqueue_cmd(%d), enable interrupt\n", id); + writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id)); + } +#endif + PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status); + list_add_tail(&cmd->list, &active_commands[id]); + writel(cmd->cmdptr, DMOV_CMD_PTR(id)); + } else { + if (list_empty(&active_commands[id])) + PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status); + + PRINT_IO("msm_dmov_enqueue_cmd(%d), enqueue command, status %x\n", id, status); + list_add_tail(&cmd->list, &ready_commands[id]); + } + spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); +} + +struct msm_dmov_exec_cmdptr_cmd { + struct msm_dmov_cmd dmov_cmd; + struct completion complete; + unsigned id; + unsigned int result; + unsigned int flush[6]; +}; + +static void dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd, unsigned int result) +{ + struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd); + cmd->result = result; + if (result != 0x80000002) { + cmd->flush[0] = readl(DMOV_FLUSH0(cmd->id)); + cmd->flush[1] = readl(DMOV_FLUSH1(cmd->id)); + cmd->flush[2] = readl(DMOV_FLUSH2(cmd->id)); + cmd->flush[3] = readl(DMOV_FLUSH3(cmd->id)); + cmd->flush[4] = readl(DMOV_FLUSH4(cmd->id)); + cmd->flush[5] = readl(DMOV_FLUSH5(cmd->id)); + } + complete(&cmd->complete); +} + +int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) +{ + struct msm_dmov_exec_cmdptr_cmd cmd; + + PRINT_FLOW("dmov_exec_cmdptr(%d, %x)\n", id, cmdptr); + + cmd.dmov_cmd.cmdptr = cmdptr; + cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func; + cmd.id = id; + init_completion(&cmd.complete); + + msm_dmov_enqueue_cmd(id, &cmd.dmov_cmd); + wait_for_completion(&cmd.complete); + + if (cmd.result != 0x80000002) { + PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result); + PRINT_ERROR("dmov_exec_cmdptr(%d): flush: %x %x %x %x\n", + id, cmd.flush[0], cmd.flush[1], cmd.flush[2], cmd.flush[3]); + return -EIO; + } + PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr); + return 0; +} + + +static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) +{ + unsigned int int_status, mask, id; + unsigned long irq_flags; + unsigned int ch_status; + unsigned int ch_result; + struct msm_dmov_cmd *cmd; + + spin_lock_irqsave(&msm_dmov_lock, irq_flags); + + int_status = readl(DMOV_ISR); /* read and clear interrupt */ + PRINT_FLOW("msm_datamover_irq_handler: DMOV_ISR %x\n", int_status); + + while (int_status) { + mask = int_status & -int_status; + id = fls(mask) - 1; + PRINT_FLOW("msm_datamover_irq_handler %08x %08x id %d\n", int_status, mask, id); + int_status &= ~mask; + ch_status = readl(DMOV_STATUS(id)); + if (!(ch_status & DMOV_STATUS_RSLT_VALID)) { + PRINT_FLOW("msm_datamover_irq_handler id %d, result not valid %x\n", id, ch_status); + continue; + } + do { + ch_result = readl(DMOV_RSLT(id)); + if (list_empty(&active_commands[id])) { + PRINT_ERROR("msm_datamover_irq_handler id %d, got result " + "with no active command, status %x, result %x\n", + id, ch_status, ch_result); + cmd = NULL; + } else + cmd = list_entry(active_commands[id].next, typeof(*cmd), list); + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x, result %x\n", id, ch_status, ch_result); + if (ch_result & DMOV_RSLT_DONE) { + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", + id, ch_status); + PRINT_IO("msm_datamover_irq_handler id %d, got result " + "for %p, result %x\n", id, cmd, ch_result); + if (cmd) { + list_del(&cmd->list); + cmd->complete_func(cmd, ch_result); + } + } + if (ch_result & DMOV_RSLT_FLUSH) { + unsigned int flush0 = readl(DMOV_FLUSH0(id)); + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); + PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, flush0); + if (cmd) { + list_del(&cmd->list); + cmd->complete_func(cmd, ch_result); + } + } + if (ch_result & DMOV_RSLT_ERROR) { + unsigned int flush0 = readl(DMOV_FLUSH0(id)); + PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); + PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, flush0); + if (cmd) { + list_del(&cmd->list); + cmd->complete_func(cmd, ch_result); + } + /* this does not seem to work, once we get an error */ + /* the datamover will no longer accept commands */ + writel(0, DMOV_FLUSH0(id)); + } + ch_status = readl(DMOV_STATUS(id)); + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); + if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) { + cmd = list_entry(ready_commands[id].next, typeof(*cmd), list); + list_del(&cmd->list); + list_add_tail(&cmd->list, &active_commands[id]); + PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id); + writel(cmd->cmdptr, DMOV_CMD_PTR(id)); + } + } while (ch_status & DMOV_STATUS_RSLT_VALID); + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); + } + spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); + return IRQ_HANDLED; +} + +static int __init msm_init_datamover(void) +{ + int i; + for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) { + INIT_LIST_HEAD(&ready_commands[i]); + INIT_LIST_HEAD(&active_commands[i]); + writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i)); + } + return request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL); +} + +arch_initcall(msm_init_datamover); + diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S new file mode 100644 index 000000000000..2b1cb7f16943 --- /dev/null +++ b/arch/arm/mach-msm/idle.S @@ -0,0 +1,36 @@ +/* linux/include/asm-arm/arch-msm/idle.S + * + * Idle processing for MSM7K - work around bugs with SWFI. + * + * Copyright (c) 2007 QUALCOMM Incorporated. + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +ENTRY(arch_idle) +#ifdef CONFIG_MSM7X00A_IDLE + mrc p15, 0, r1, c1, c0, 0 /* read current CR */ + bic r0, r1, #(1 << 2) /* clear dcache bit */ + bic r0, r0, #(1 << 12) /* clear icache bit */ + mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ + + mov r0, #0 /* prepare wfi value */ + mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ + mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ + mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ + + mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ +#endif + mov pc, lr diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c new file mode 100644 index 000000000000..c39edb994a88 --- /dev/null +++ b/arch/arm/mach-msm/io.c @@ -0,0 +1,85 @@ +/* arch/arm/mach-msm/io.c + * + * MSM7K io support + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/page.h> +#include <asm/arch/msm_iomap.h> +#include <asm/mach/map.h> + +#include <asm/arch/board.h> + +#define MSM_DEVICE(name) { \ + .virtual = MSM_##name##_BASE, \ + .pfn = __phys_to_pfn(MSM_##name##_PHYS), \ + .length = MSM_##name##_SIZE, \ + .type = MT_DEVICE_NONSHARED, \ + } + +static struct map_desc msm_io_desc[] __initdata = { + MSM_DEVICE(VIC), + MSM_DEVICE(CSR), + MSM_DEVICE(GPT), + MSM_DEVICE(DMOV), + MSM_DEVICE(UART1), + MSM_DEVICE(UART2), + MSM_DEVICE(UART3), + MSM_DEVICE(I2C), + MSM_DEVICE(GPIO1), + MSM_DEVICE(GPIO2), + MSM_DEVICE(HSUSB), + MSM_DEVICE(CLK_CTL), + MSM_DEVICE(PMDH), + MSM_DEVICE(EMDH), + MSM_DEVICE(MDP), + { + .virtual = MSM_SHARED_RAM_BASE, + .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), + .length = MSM_SHARED_RAM_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init msm_map_common_io(void) +{ + /* Make sure the peripheral register window is closed, since + * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which + * pages are peripheral interface or not. + */ + asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0)); + + iotable_init(msm_io_desc, ARRAY_SIZE(msm_io_desc)); +} + +void __iomem * +__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) +{ + if (mtype == MT_DEVICE) { + /* The peripherals in the 88000000 - D0000000 range + * are only accessable by type MT_DEVICE_NONSHARED. + * Adjust mtype as necessary to make this "just work." + */ + if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000)) + mtype = MT_DEVICE_NONSHARED; + } + + return __arm_ioremap(phys_addr, size, mtype); +} diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c new file mode 100644 index 000000000000..24158040b789 --- /dev/null +++ b/arch/arm/mach-msm/irq.c @@ -0,0 +1,154 @@ +/* linux/arch/arm/mach-msm/irq.c + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/ptrace.h> +#include <linux/timer.h> + +#include <linux/irq.h> +#include <asm/hardware.h> + +#include <asm/io.h> + +#include <asm/arch/msm_iomap.h> + +#define VIC_REG(off) (MSM_VIC_BASE + (off)) + +#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */ +#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */ +#define VIC_INT_EN0 VIC_REG(0x0010) +#define VIC_INT_EN1 VIC_REG(0x0014) +#define VIC_INT_ENCLEAR0 VIC_REG(0x0020) +#define VIC_INT_ENCLEAR1 VIC_REG(0x0024) +#define VIC_INT_ENSET0 VIC_REG(0x0030) +#define VIC_INT_ENSET1 VIC_REG(0x0034) +#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */ +#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */ +#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */ +#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */ +#define VIC_NO_PEND_VAL VIC_REG(0x0060) +#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */ +#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */ +#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */ +#define VIC_IRQ_STATUS0 VIC_REG(0x0080) +#define VIC_IRQ_STATUS1 VIC_REG(0x0084) +#define VIC_FIQ_STATUS0 VIC_REG(0x0090) +#define VIC_FIQ_STATUS1 VIC_REG(0x0094) +#define VIC_RAW_STATUS0 VIC_REG(0x00A0) +#define VIC_RAW_STATUS1 VIC_REG(0x00A4) +#define VIC_INT_CLEAR0 VIC_REG(0x00B0) +#define VIC_INT_CLEAR1 VIC_REG(0x00B4) +#define VIC_SOFTINT0 VIC_REG(0x00C0) +#define VIC_SOFTINT1 VIC_REG(0x00C4) +#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */ +#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */ +#define VIC_IRQ_VEC_WR VIC_REG(0x00D8) +#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0) +#define VIC_IRQ_IN_STACK VIC_REG(0x00E4) +#define VIC_TEST_BUS_SEL VIC_REG(0x00E8) + +#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4)) +#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4)) + +static void msm_irq_ack(unsigned int irq) +{ + unsigned reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0); + irq = 1 << (irq & 31); + writel(irq, reg); +} + +static void msm_irq_mask(unsigned int irq) +{ + unsigned reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0); + writel(1 << (irq & 31), reg); +} + +static void msm_irq_unmask(unsigned int irq) +{ + unsigned reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0); + writel(1 << (irq & 31), reg); +} + +static int msm_irq_set_wake(unsigned int irq, unsigned int on) +{ + return -EINVAL; +} + +static int msm_irq_set_type(unsigned int irq, unsigned int flow_type) +{ + unsigned treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0); + unsigned preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0); + int b = 1 << (irq & 31); + + if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW)) + writel(readl(preg) | b, preg); + if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH)) + writel(readl(preg) & (~b), preg); + + if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { + writel(readl(treg) | b, treg); + set_irq_handler(irq, handle_edge_irq); + } + if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) { + writel(readl(treg) & (~b), treg); + set_irq_handler(irq, handle_level_irq); + } + return 0; +} + +static struct irq_chip msm_irq_chip = { + .name = "msm", + .ack = msm_irq_ack, + .mask = msm_irq_mask, + .unmask = msm_irq_unmask, + .set_wake = msm_irq_set_wake, + .set_type = msm_irq_set_type, +}; + +void __init msm_init_irq(void) +{ + unsigned n; + + /* select level interrupts */ + writel(0, VIC_INT_TYPE0); + writel(0, VIC_INT_TYPE1); + + /* select highlevel interrupts */ + writel(0, VIC_INT_POLARITY0); + writel(0, VIC_INT_POLARITY1); + + /* select IRQ for all INTs */ + writel(0, VIC_INT_SELECT0); + writel(0, VIC_INT_SELECT1); + + /* disable all INTs */ + writel(0, VIC_INT_EN0); + writel(0, VIC_INT_EN1); + + /* don't use 1136 vic */ + writel(0, VIC_CONFIG); + + /* enable interrupt controller */ + writel(1, VIC_INT_MASTEREN); + + for (n = 0; n < NR_MSM_IRQS; n++) { + set_irq_chip(n, &msm_irq_chip); + set_irq_handler(n, handle_level_irq); + set_irq_flags(n, IRQF_VALID); + } +} diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c new file mode 100644 index 000000000000..bd4732d1ab3e --- /dev/null +++ b/arch/arm/mach-msm/timer.c @@ -0,0 +1,205 @@ +/* linux/arch/arm/mach-msm/timer.c + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/delay.h> + +#include <asm/mach/time.h> +#include <asm/arch/msm_iomap.h> + +#include <asm/io.h> + +#define MSM_DGT_BASE (MSM_GPT_BASE + 0x10) +#define MSM_DGT_SHIFT (5) + +#define TIMER_MATCH_VAL 0x0000 +#define TIMER_COUNT_VAL 0x0004 +#define TIMER_ENABLE 0x0008 +#define TIMER_ENABLE_CLR_ON_MATCH_EN 2 +#define TIMER_ENABLE_EN 1 +#define TIMER_CLEAR 0x000C + +#define CSR_PROTECTION 0x0020 +#define CSR_PROTECTION_EN 1 + +#define GPT_HZ 32768 +#define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */ + +struct msm_clock { + struct clock_event_device clockevent; + struct clocksource clocksource; + struct irqaction irq; + uint32_t regbase; + uint32_t freq; + uint32_t shift; +}; + +static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static cycle_t msm_gpt_read(void) +{ + return readl(MSM_GPT_BASE + TIMER_COUNT_VAL); +} + +static cycle_t msm_dgt_read(void) +{ + return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT; +} + +static int msm_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent); + uint32_t now = readl(clock->regbase + TIMER_COUNT_VAL); + uint32_t alarm = now + (cycles << clock->shift); + int late; + + writel(alarm, clock->regbase + TIMER_MATCH_VAL); + now = readl(clock->regbase + TIMER_COUNT_VAL); + late = now - alarm; + if (late >= (-2 << clock->shift) && late < DGT_HZ*5) { + printk(KERN_NOTICE "msm_timer_set_next_event(%lu) clock %s, " + "alarm already expired, now %x, alarm %x, late %d\n", + cycles, clock->clockevent.name, now, alarm, late); + return -ETIME; + } + return 0; +} + +static void msm_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent); + switch (mode) { + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_PERIODIC: + break; + case CLOCK_EVT_MODE_ONESHOT: + writel(TIMER_ENABLE_EN, clock->regbase + TIMER_ENABLE); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + writel(0, clock->regbase + TIMER_ENABLE); + break; + } +} + +static struct msm_clock msm_clocks[] = { + { + .clockevent = { + .name = "gp_timer", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .rating = 200, + .set_next_event = msm_timer_set_next_event, + .set_mode = msm_timer_set_mode, + }, + .clocksource = { + .name = "gp_timer", + .rating = 200, + .read = msm_gpt_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 24, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + }, + .irq = { + .name = "gp_timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING, + .handler = msm_timer_interrupt, + .dev_id = &msm_clocks[0].clockevent, + .irq = INT_GP_TIMER_EXP + }, + .regbase = MSM_GPT_BASE, + .freq = GPT_HZ + }, + { + .clockevent = { + .name = "dg_timer", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32 + MSM_DGT_SHIFT, + .rating = 300, + .set_next_event = msm_timer_set_next_event, + .set_mode = msm_timer_set_mode, + }, + .clocksource = { + .name = "dg_timer", + .rating = 300, + .read = msm_dgt_read, + .mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)), + .shift = 24 - MSM_DGT_SHIFT, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + }, + .irq = { + .name = "dg_timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING, + .handler = msm_timer_interrupt, + .dev_id = &msm_clocks[1].clockevent, + .irq = INT_DEBUG_TIMER_EXP + }, + .regbase = MSM_DGT_BASE, + .freq = DGT_HZ >> MSM_DGT_SHIFT, + .shift = MSM_DGT_SHIFT + } +}; + +static void __init msm_timer_init(void) +{ + int i; + int res; + + for (i = 0; i < ARRAY_SIZE(msm_clocks); i++) { + struct msm_clock *clock = &msm_clocks[i]; + struct clock_event_device *ce = &clock->clockevent; + struct clocksource *cs = &clock->clocksource; + writel(0, clock->regbase + TIMER_ENABLE); + writel(0, clock->regbase + TIMER_CLEAR); + writel(~0, clock->regbase + TIMER_MATCH_VAL); + + ce->mult = div_sc(clock->freq, NSEC_PER_SEC, ce->shift); + /* allow at least 10 seconds to notice that the timer wrapped */ + ce->max_delta_ns = + clockevent_delta2ns(0xf0000000 >> clock->shift, ce); + /* 4 gets rounded down to 3 */ + ce->min_delta_ns = clockevent_delta2ns(4, ce); + ce->cpumask = cpumask_of_cpu(0); + + cs->mult = clocksource_hz2mult(clock->freq, cs->shift); + res = clocksource_register(cs); + if (res) + printk(KERN_ERR "msm_timer_init: clocksource_register " + "failed for %s\n", cs->name); + + res = setup_irq(clock->irq.irq, &clock->irq); + if (res) + printk(KERN_ERR "msm_timer_init: setup_irq " + "failed for %s\n", cs->name); + + clockevents_register_device(ce); + } +} + +struct sys_timer msm_timer = { + .init = msm_timer_init +}; diff --git a/arch/arm/mach-mx3/time.c b/arch/arm/mach-mx3/time.c index e81fb5c5d7c3..fb565c98dbfb 100644 --- a/arch/arm/mach-mx3/time.c +++ b/arch/arm/mach-mx3/time.c @@ -45,8 +45,6 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) { unsigned int next_match; - write_seqlock(&xtime_lock); - if (__raw_readl(MXC_GPT_GPTSR) & GPTSR_OF1) { do { timer_tick(); @@ -57,8 +55,6 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) __raw_readl(MXC_GPT_GPTCNT)) <= 0); } - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index 4762e207b0bf..ea07b54afa59 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -33,12 +33,8 @@ static irqreturn_t netx_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - timer_tick(); - write_sequnlock(&xtime_lock); - /* acknowledge interrupt */ writel(COUNTER_BIT(0), NETX_GPIO_IRQ); diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index d5f6ea14fc7b..f550b19e1ecd 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -76,7 +76,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = INT_730_MPU_EXT_NIRQ, .end = 0, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 9393824cc150..bfa04fa25524 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -209,7 +209,7 @@ static struct resource h2_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(0), .end = OMAP_GPIO_IRQ(0), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 978cdab16535..056519860565 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -208,7 +208,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(40), .end = OMAP_GPIO_IRQ(40), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 7e63a41e37c6..7d2d8af155a3 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -202,7 +202,7 @@ static struct resource innovator1510_smc91x_resources[] = { [1] = { .start = OMAP1510_INT_ETHER, .end = OMAP1510_INT_ETHER, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -269,7 +269,7 @@ static struct resource innovator1610_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(0), .end = OMAP_GPIO_IRQ(0), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 182a98a9df4c..e2c8ffd75cff 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -32,7 +32,6 @@ #include <asm/arch/common.h> #include <asm/arch/dsp_common.h> #include <asm/arch/aic23.h> -#include <asm/arch/gpio.h> #include <asm/arch/omapfb.h> #include <asm/arch/lcd_mipid.h> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 5b575e687a2a..84333440008c 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -31,7 +31,6 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/interrupt.h> #include <linux/i2c.h> #include <linux/mtd/mtd.h> @@ -112,7 +111,7 @@ static struct resource osk5912_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(0), .end = OMAP_GPIO_IRQ(0), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index e47010fec275..ed7094a70064 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -42,7 +42,6 @@ #include <asm/arch/common.h> #include <asm/arch/omap-alsa.h> -#include <linux/input.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index c275d517764a..a9a0f6610c3d 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -44,7 +44,6 @@ #include <asm/arch/common.h> #include <asm/arch/omap-alsa.h> -#include <linux/input.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index e44437e10eef..534dcfb9d263 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -75,7 +75,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = INT_730_MPU_EXT_NIRQ, .end = 0, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 214dd19889ac..c82a1cd20ad4 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -117,7 +117,7 @@ static struct resource voiceblue_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(8), .end = OMAP_GPIO_IRQ(8), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index d9805e3d9304..06b7e54a0128 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -639,7 +639,7 @@ static void omap_pm_finish(void) } -static irqreturn_t omap_wakeup_interrupt(int irq, void *dev) +static irqreturn_t omap_wakeup_interrupt(int irq, void *dev) { return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 7e76fbf19b5d..64235dee5614 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -104,7 +104,7 @@ static struct resource sdp2430_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 3bb49c17c858..7846551f0575 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -26,7 +26,6 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/leds.h> -#include <linux/irq.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -127,7 +126,7 @@ static struct resource apollon_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ), .end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 8d322c20ccae..3234deedb946 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -40,13 +40,9 @@ static inline void omap2_gp_timer_start(unsigned long load_val) static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW); timer_tick(); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-orion/Kconfig b/arch/arm/mach-orion/Kconfig new file mode 100644 index 000000000000..1dcbb6ac5a30 --- /dev/null +++ b/arch/arm/mach-orion/Kconfig @@ -0,0 +1,41 @@ +if ARCH_ORION + +menu "Orion Implementations" + +config MACH_DB88F5281 + bool "Marvell Orion-2 Development Board" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Marvell Orion-2 (88F5281) Development Board + +config MACH_RD88F5182 + bool "Marvell Orion-NAS Reference Design" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Marvell Orion-NAS (88F5182) RD2 + +config MACH_KUROBOX_PRO + bool "KuroBox Pro" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + KuroBox Pro platform. + +config MACH_DNS323 + bool "D-Link DNS-323" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + D-Link DNS-323 platform. + +config MACH_TS209 + bool "QNAP TS-109/TS-209" + help + Say 'Y' here if you want your kernel to support the + QNAP TS-109/TS-209 platform. + +endmenu + +endif diff --git a/arch/arm/mach-orion/Makefile b/arch/arm/mach-orion/Makefile new file mode 100644 index 000000000000..f91d937a73e8 --- /dev/null +++ b/arch/arm/mach-orion/Makefile @@ -0,0 +1,6 @@ +obj-y += common.o addr-map.o pci.o gpio.o irq.o time.o +obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o +obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o +obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o +obj-$(CONFIG_MACH_DNS323) += dns323-setup.o +obj-$(CONFIG_MACH_TS209) += ts209-setup.o diff --git a/arch/arm/mach-orion/Makefile.boot b/arch/arm/mach-orion/Makefile.boot new file mode 100644 index 000000000000..67039c3e0c48 --- /dev/null +++ b/arch/arm/mach-orion/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c new file mode 100644 index 000000000000..488da3811a68 --- /dev/null +++ b/arch/arm/mach-orion/addr-map.c @@ -0,0 +1,484 @@ +/* + * arch/arm/mach-orion/addr-map.c + * + * Address map functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/hardware.h> +#include "common.h" + +/* + * The Orion has fully programable address map. There's a separate address + * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB, + * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own + * address decode windows that allow it to access any of the Orion resources. + * + * CPU address decoding -- + * Linux assumes that it is the boot loader that already setup the access to + * DDR and internal registers. + * Setup access to PCI and PCI-E IO/MEM space is issued by core.c. + * Setup access to various devices located on the device bus interface (e.g. + * flashes, RTC, etc) should be issued by machine-setup.c according to + * specific board population (by using orion_setup_cpu_win()). + * + * Non-CPU Masters address decoding -- + * Unlike the CPU, we setup the access from Orion's master interfaces to DDR + * banks only (the typical use case). + * Setup access for each master to DDR is issued by common.c. + * + * Note: although orion_setbits() and orion_clrbits() are not atomic + * no locking is necessary here since code in this file is only called + * at boot time when there is no concurrency issues. + */ + +/* + * Generic Address Decode Windows bit settings + */ +#define TARGET_DDR 0 +#define TARGET_PCI 3 +#define TARGET_PCIE 4 +#define TARGET_DEV_BUS 1 +#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \ + ((n) == 1) ? 0xd : \ + ((n) == 2) ? 0xb : \ + ((n) == 3) ? 0x7 : 0xf) +#define ATTR_PCIE_MEM 0x59 +#define ATTR_PCIE_IO 0x51 +#define ATTR_PCI_MEM 0x59 +#define ATTR_PCI_IO 0x51 +#define ATTR_DEV_CS0 0x1e +#define ATTR_DEV_CS1 0x1d +#define ATTR_DEV_CS2 0x1b +#define ATTR_DEV_BOOT 0xf +#define WIN_EN 1 + +/* + * Helpers to get DDR banks info + */ +#define DDR_BASE_CS(n) ORION_DDR_REG(0x1500 + ((n) * 8)) +#define DDR_SIZE_CS(n) ORION_DDR_REG(0x1504 + ((n) * 8)) +#define DDR_MAX_CS 4 +#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1) +#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000) +#define DDR_BANK_EN 1 + +/* + * CPU Address Decode Windows registers + */ +#define CPU_WIN_CTRL(n) ORION_BRIDGE_REG(0x000 | ((n) << 4)) +#define CPU_WIN_BASE(n) ORION_BRIDGE_REG(0x004 | ((n) << 4)) +#define CPU_WIN_REMAP_LO(n) ORION_BRIDGE_REG(0x008 | ((n) << 4)) +#define CPU_WIN_REMAP_HI(n) ORION_BRIDGE_REG(0x00c | ((n) << 4)) +#define CPU_MAX_WIN 8 + +/* + * Use this CPU address decode windows allocation + */ +#define CPU_WIN_PCIE_IO 0 +#define CPU_WIN_PCI_IO 1 +#define CPU_WIN_PCIE_MEM 2 +#define CPU_WIN_PCI_MEM 3 +#define CPU_WIN_DEV_BOOT 4 +#define CPU_WIN_DEV_CS0 5 +#define CPU_WIN_DEV_CS1 6 +#define CPU_WIN_DEV_CS2 7 + +/* + * PCIE Address Decode Windows registers + */ +#define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4)) +#define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8)) +#define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8)) +#define PCIE_WIN_CTRL(n) ORION_PCIE_REG(0x1820 + ((n) << 4)) +#define PCIE_WIN_BASE(n) ORION_PCIE_REG(0x1824 + ((n) << 4)) +#define PCIE_WIN_REMAP(n) ORION_PCIE_REG(0x182c + ((n) << 4)) +#define PCIE_DEFWIN_CTRL ORION_PCIE_REG(0x18b0) +#define PCIE_EXPROM_WIN_CTRL ORION_PCIE_REG(0x18c0) +#define PCIE_EXPROM_WIN_REMP ORION_PCIE_REG(0x18c4) +#define PCIE_MAX_BARS 3 +#define PCIE_MAX_WINS 5 + +/* + * Use PCIE BAR '1' for all DDR banks + */ +#define PCIE_DRAM_BAR 1 + +/* + * PCI Address Decode Windows registers + */ +#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION_PCI_REG(0xc08) : \ + ((n) == 1) ? ORION_PCI_REG(0xd08) : \ + ((n) == 2) ? ORION_PCI_REG(0xc0c) : \ + ((n) == 3) ? ORION_PCI_REG(0xd0c) : 0) +#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION_PCI_REG(0xc48) : \ + ((n) == 1) ? ORION_PCI_REG(0xd48) : \ + ((n) == 2) ? ORION_PCI_REG(0xc4c) : \ + ((n) == 3) ? ORION_PCI_REG(0xd4c) : 0) +#define PCI_BAR_ENABLE ORION_PCI_REG(0xc3c) +#define PCI_CTRL_BASE_LO(n) ORION_PCI_REG(0x1e00 | ((n) << 4)) +#define PCI_CTRL_BASE_HI(n) ORION_PCI_REG(0x1e04 | ((n) << 4)) +#define PCI_CTRL_SIZE(n) ORION_PCI_REG(0x1e08 | ((n) << 4)) +#define PCI_ADDR_DECODE_CTRL ORION_PCI_REG(0xd3c) + +/* + * PCI configuration heleprs for BAR settings + */ +#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1) +#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10) +#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14) + +/* + * Gigabit Ethernet Address Decode Windows registers + */ +#define ETH_WIN_BASE(win) ORION_ETH_REG(0x200 + ((win) * 8)) +#define ETH_WIN_SIZE(win) ORION_ETH_REG(0x204 + ((win) * 8)) +#define ETH_WIN_REMAP(win) ORION_ETH_REG(0x280 + ((win) * 4)) +#define ETH_WIN_EN ORION_ETH_REG(0x290) +#define ETH_WIN_PROT ORION_ETH_REG(0x294) +#define ETH_MAX_WIN 6 +#define ETH_MAX_REMAP_WIN 4 + +/* + * USB Address Decode Windows registers + */ +#define USB_WIN_CTRL(i, w) ((i == 0) ? ORION_USB0_REG(0x320 + ((w) << 4)) \ + : ORION_USB1_REG(0x320 + ((w) << 4))) +#define USB_WIN_BASE(i, w) ((i == 0) ? ORION_USB0_REG(0x324 + ((w) << 4)) \ + : ORION_USB1_REG(0x324 + ((w) << 4))) +#define USB_MAX_WIN 4 + +/* + * SATA Address Decode Windows registers + */ +#define SATA_WIN_CTRL(win) ORION_SATA_REG(0x30 + ((win) * 0x10)) +#define SATA_WIN_BASE(win) ORION_SATA_REG(0x34 + ((win) * 0x10)) +#define SATA_MAX_WIN 4 + +static int __init orion_cpu_win_can_remap(u32 win) +{ + u32 dev, rev; + + orion_pcie_id(&dev, &rev); + if ((dev == MV88F5281_DEV_ID && win < 4) + || (dev == MV88F5182_DEV_ID && win < 2) + || (dev == MV88F5181_DEV_ID && win < 2)) + return 1; + + return 0; +} + +void __init orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap) +{ + u32 win, attr, ctrl; + + switch (target) { + case ORION_PCIE_IO: + target = TARGET_PCIE; + attr = ATTR_PCIE_IO; + win = CPU_WIN_PCIE_IO; + break; + case ORION_PCI_IO: + target = TARGET_PCI; + attr = ATTR_PCI_IO; + win = CPU_WIN_PCI_IO; + break; + case ORION_PCIE_MEM: + target = TARGET_PCIE; + attr = ATTR_PCIE_MEM; + win = CPU_WIN_PCIE_MEM; + break; + case ORION_PCI_MEM: + target = TARGET_PCI; + attr = ATTR_PCI_MEM; + win = CPU_WIN_PCI_MEM; + break; + case ORION_DEV_BOOT: + target = TARGET_DEV_BUS; + attr = ATTR_DEV_BOOT; + win = CPU_WIN_DEV_BOOT; + break; + case ORION_DEV0: + target = TARGET_DEV_BUS; + attr = ATTR_DEV_CS0; + win = CPU_WIN_DEV_CS0; + break; + case ORION_DEV1: + target = TARGET_DEV_BUS; + attr = ATTR_DEV_CS1; + win = CPU_WIN_DEV_CS1; + break; + case ORION_DEV2: + target = TARGET_DEV_BUS; + attr = ATTR_DEV_CS2; + win = CPU_WIN_DEV_CS2; + break; + case ORION_DDR: + case ORION_REGS: + /* + * Must be mapped by bootloader. + */ + default: + target = attr = win = -1; + BUG(); + } + + base &= 0xffff0000; + ctrl = (((size - 1) & 0xffff0000) | (attr << 8) | + (target << 4) | WIN_EN); + + orion_write(CPU_WIN_BASE(win), base); + orion_write(CPU_WIN_CTRL(win), ctrl); + + if (orion_cpu_win_can_remap(win)) { + if (remap >= 0) { + orion_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000); + orion_write(CPU_WIN_REMAP_HI(win), 0); + } else { + orion_write(CPU_WIN_REMAP_LO(win), base); + orion_write(CPU_WIN_REMAP_HI(win), 0); + } + } +} + +void __init orion_setup_cpu_wins(void) +{ + int i; + + /* + * First, disable and clear windows + */ + for (i = 0; i < CPU_MAX_WIN; i++) { + orion_write(CPU_WIN_BASE(i), 0); + orion_write(CPU_WIN_CTRL(i), 0); + if (orion_cpu_win_can_remap(i)) { + orion_write(CPU_WIN_REMAP_LO(i), 0); + orion_write(CPU_WIN_REMAP_HI(i), 0); + } + } + + /* + * Setup windows for PCI+PCIE IO+MAM space + */ + orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_BASE, + ORION_PCIE_IO_SIZE, ORION_PCIE_IO_REMAP); + orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_BASE, + ORION_PCI_IO_SIZE, ORION_PCI_IO_REMAP); + orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_BASE, + ORION_PCIE_MEM_SIZE, -1); + orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_BASE, + ORION_PCI_MEM_SIZE, -1); +} + +/* + * Setup PCIE BARs and Address Decode Wins: + * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks + * WIN[0-3] -> DRAM bank[0-3] + */ +void __init orion_setup_pcie_wins(void) +{ + u32 base, size, i; + + /* + * First, disable and clear BARs and windows + */ + for (i = 1; i < PCIE_MAX_BARS; i++) { + orion_write(PCIE_BAR_CTRL(i), 0); + orion_write(PCIE_BAR_LO(i), 0); + orion_write(PCIE_BAR_HI(i), 0); + } + + for (i = 0; i < PCIE_MAX_WINS; i++) { + orion_write(PCIE_WIN_CTRL(i), 0); + orion_write(PCIE_WIN_BASE(i), 0); + orion_write(PCIE_WIN_REMAP(i), 0); + } + + /* + * Setup windows for DDR banks. Count total DDR size on the fly. + */ + base = DDR_REG_TO_BASE(orion_read(DDR_BASE_CS(0))); + size = 0; + for (i = 0; i < DDR_MAX_CS; i++) { + u32 bank_base, bank_size; + bank_size = orion_read(DDR_SIZE_CS(i)); + bank_base = orion_read(DDR_BASE_CS(i)); + if (bank_size & DDR_BANK_EN) { + bank_size = DDR_REG_TO_SIZE(bank_size); + bank_base = DDR_REG_TO_BASE(bank_base); + orion_write(PCIE_WIN_BASE(i), bank_base & 0xffff0000); + orion_write(PCIE_WIN_REMAP(i), 0); + orion_write(PCIE_WIN_CTRL(i), + ((bank_size-1) & 0xffff0000) | + (ATTR_DDR_CS(i) << 8) | + (TARGET_DDR << 4) | + (PCIE_DRAM_BAR << 1) | WIN_EN); + size += bank_size; + } + } + + /* + * Setup BAR[1] to all DRAM banks + */ + orion_write(PCIE_BAR_LO(PCIE_DRAM_BAR), base & 0xffff0000); + orion_write(PCIE_BAR_HI(PCIE_DRAM_BAR), 0); + orion_write(PCIE_BAR_CTRL(PCIE_DRAM_BAR), + ((size - 1) & 0xffff0000) | WIN_EN); +} + +void __init orion_setup_pci_wins(void) +{ + u32 base, size, i; + + /* + * First, disable windows + */ + orion_write(PCI_BAR_ENABLE, 0xffffffff); + + /* + * Setup windows for DDR banks. + */ + for (i = 0; i < DDR_MAX_CS; i++) { + base = orion_read(DDR_BASE_CS(i)); + size = orion_read(DDR_SIZE_CS(i)); + if (size & DDR_BANK_EN) { + u32 bus, dev, func, reg, val; + size = DDR_REG_TO_SIZE(size); + base = DDR_REG_TO_BASE(base); + bus = orion_pci_local_bus_nr(); + dev = orion_pci_local_dev_nr(); + func = PCI_CONF_FUNC_BAR_CS(i); + reg = PCI_CONF_REG_BAR_LO_CS(i); + orion_pci_hw_rd_conf(bus, dev, func, reg, 4, &val); + orion_pci_hw_wr_conf(bus, dev, func, reg, 4, + (base & 0xfffff000) | (val & 0xfff)); + reg = PCI_CONF_REG_BAR_HI_CS(i); + orion_pci_hw_wr_conf(bus, dev, func, reg, 4, 0); + orion_write(PCI_BAR_SIZE_DDR_CS(i), + (size - 1) & 0xfffff000); + orion_write(PCI_BAR_REMAP_DDR_CS(i), + base & 0xfffff000); + orion_clrbits(PCI_BAR_ENABLE, (1 << i)); + } + } + + /* + * Disable automatic update of address remaping when writing to BARs + */ + orion_setbits(PCI_ADDR_DECODE_CTRL, 1); +} + +void __init orion_setup_usb_wins(void) +{ + int i; + u32 usb_if, dev, rev; + u32 max_usb_if = 1; + + orion_pcie_id(&dev, &rev); + if (dev == MV88F5182_DEV_ID) + max_usb_if = 2; + + for (usb_if = 0; usb_if < max_usb_if; usb_if++) { + /* + * First, disable and clear windows + */ + for (i = 0; i < USB_MAX_WIN; i++) { + orion_write(USB_WIN_BASE(usb_if, i), 0); + orion_write(USB_WIN_CTRL(usb_if, i), 0); + } + + /* + * Setup windows for DDR banks. + */ + for (i = 0; i < DDR_MAX_CS; i++) { + u32 base, size; + size = orion_read(DDR_SIZE_CS(i)); + base = orion_read(DDR_BASE_CS(i)); + if (size & DDR_BANK_EN) { + base = DDR_REG_TO_BASE(base); + size = DDR_REG_TO_SIZE(size); + orion_write(USB_WIN_CTRL(usb_if, i), + ((size-1) & 0xffff0000) | + (ATTR_DDR_CS(i) << 8) | + (TARGET_DDR << 4) | WIN_EN); + orion_write(USB_WIN_BASE(usb_if, i), + base & 0xffff0000); + } + } + } +} + +void __init orion_setup_eth_wins(void) +{ + int i; + + /* + * First, disable and clear windows + */ + for (i = 0; i < ETH_MAX_WIN; i++) { + orion_write(ETH_WIN_BASE(i), 0); + orion_write(ETH_WIN_SIZE(i), 0); + orion_setbits(ETH_WIN_EN, 1 << i); + orion_clrbits(ETH_WIN_PROT, 0x3 << (i * 2)); + if (i < ETH_MAX_REMAP_WIN) + orion_write(ETH_WIN_REMAP(i), 0); + } + + /* + * Setup windows for DDR banks. + */ + for (i = 0; i < DDR_MAX_CS; i++) { + u32 base, size; + size = orion_read(DDR_SIZE_CS(i)); + base = orion_read(DDR_BASE_CS(i)); + if (size & DDR_BANK_EN) { + base = DDR_REG_TO_BASE(base); + size = DDR_REG_TO_SIZE(size); + orion_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000); + orion_write(ETH_WIN_BASE(i), (base & 0xffff0000) | + (ATTR_DDR_CS(i) << 8) | + TARGET_DDR); + orion_clrbits(ETH_WIN_EN, 1 << i); + orion_setbits(ETH_WIN_PROT, 0x3 << (i * 2)); + } + } +} + +void __init orion_setup_sata_wins(void) +{ + int i; + + /* + * First, disable and clear windows + */ + for (i = 0; i < SATA_MAX_WIN; i++) { + orion_write(SATA_WIN_BASE(i), 0); + orion_write(SATA_WIN_CTRL(i), 0); + } + + /* + * Setup windows for DDR banks. + */ + for (i = 0; i < DDR_MAX_CS; i++) { + u32 base, size; + size = orion_read(DDR_SIZE_CS(i)); + base = orion_read(DDR_BASE_CS(i)); + if (size & DDR_BANK_EN) { + base = DDR_REG_TO_BASE(base); + size = DDR_REG_TO_SIZE(size); + orion_write(SATA_WIN_CTRL(i), + ((size-1) & 0xffff0000) | + (ATTR_DDR_CS(i) << 8) | + (TARGET_DDR << 4) | WIN_EN); + orion_write(SATA_WIN_BASE(i), + base & 0xffff0000); + } + } +} diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c new file mode 100644 index 000000000000..5e20b6b32508 --- /dev/null +++ b/arch/arm/mach-orion/common.c @@ -0,0 +1,315 @@ +/* + * arch/arm/mach-orion/common.c + * + * Core functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/mv643xx_eth.h> +#include <linux/mv643xx_i2c.h> +#include <asm/page.h> +#include <asm/timex.h> +#include <asm/mach/map.h> +#include <asm/arch/orion.h> +#include "common.h" + +/***************************************************************************** + * I/O Address Mapping + ****************************************************************************/ +static struct map_desc orion_io_desc[] __initdata = { + { + .virtual = ORION_REGS_BASE, + .pfn = __phys_to_pfn(ORION_REGS_BASE), + .length = ORION_REGS_SIZE, + .type = MT_DEVICE + }, + { + .virtual = ORION_PCIE_IO_BASE, + .pfn = __phys_to_pfn(ORION_PCIE_IO_BASE), + .length = ORION_PCIE_IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = ORION_PCI_IO_BASE, + .pfn = __phys_to_pfn(ORION_PCI_IO_BASE), + .length = ORION_PCI_IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = ORION_PCIE_WA_BASE, + .pfn = __phys_to_pfn(ORION_PCIE_WA_BASE), + .length = ORION_PCIE_WA_SIZE, + .type = MT_DEVICE + }, +}; + +void __init orion_map_io(void) +{ + iotable_init(orion_io_desc, ARRAY_SIZE(orion_io_desc)); +} + +/***************************************************************************** + * UART + ****************************************************************************/ + +static struct resource orion_uart_resources[] = { + { + .start = UART0_BASE, + .end = UART0_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ORION_UART0, + .end = IRQ_ORION_UART0, + .flags = IORESOURCE_IRQ, + }, + { + .start = UART1_BASE, + .end = UART1_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ORION_UART1, + .end = IRQ_ORION_UART1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct plat_serial8250_port orion_uart_data[] = { + { + .mapbase = UART0_BASE, + .membase = (char *)UART0_BASE, + .irq = IRQ_ORION_UART0, + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = ORION_TCLK, + }, + { + .mapbase = UART1_BASE, + .membase = (char *)UART1_BASE, + .irq = IRQ_ORION_UART1, + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = ORION_TCLK, + }, + { }, +}; + +static struct platform_device orion_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = orion_uart_data, + }, + .resource = orion_uart_resources, + .num_resources = ARRAY_SIZE(orion_uart_resources), +}; + +/******************************************************************************* + * USB Controller - 2 interfaces + ******************************************************************************/ + +static struct resource orion_ehci0_resources[] = { + { + .start = ORION_USB0_REG_BASE, + .end = ORION_USB0_REG_BASE + SZ_4K, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ORION_USB0_CTRL, + .end = IRQ_ORION_USB0_CTRL, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource orion_ehci1_resources[] = { + { + .start = ORION_USB1_REG_BASE, + .end = ORION_USB1_REG_BASE + SZ_4K, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ORION_USB1_CTRL, + .end = IRQ_ORION_USB1_CTRL, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ehci_dmamask = 0xffffffffUL; + +static struct platform_device orion_ehci0 = { + .name = "orion-ehci", + .id = 0, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .resource = orion_ehci0_resources, + .num_resources = ARRAY_SIZE(orion_ehci0_resources), +}; + +static struct platform_device orion_ehci1 = { + .name = "orion-ehci", + .id = 1, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .resource = orion_ehci1_resources, + .num_resources = ARRAY_SIZE(orion_ehci1_resources), +}; + +/***************************************************************************** + * Gigabit Ethernet port + * (The Orion and Discovery (MV643xx) families use the same Ethernet driver) + ****************************************************************************/ + +static struct resource orion_eth_shared_resources[] = { + { + .start = ORION_ETH_REG_BASE, + .end = ORION_ETH_REG_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device orion_eth_shared = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 0, + .num_resources = 1, + .resource = orion_eth_shared_resources, +}; + +static struct resource orion_eth_resources[] = { + { + .name = "eth irq", + .start = IRQ_ORION_ETH_SUM, + .end = IRQ_ORION_ETH_SUM, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device orion_eth = { + .name = MV643XX_ETH_NAME, + .id = 0, + .num_resources = 1, + .resource = orion_eth_resources, +}; + +void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data) +{ + orion_eth.dev.platform_data = eth_data; + platform_device_register(&orion_eth_shared); + platform_device_register(&orion_eth); +} + +/***************************************************************************** + * I2C controller + * (The Orion and Discovery (MV643xx) families share the same I2C controller) + ****************************************************************************/ + +static struct mv64xxx_i2c_pdata orion_i2c_pdata = { + .freq_m = 8, /* assumes 166 MHz TCLK */ + .freq_n = 3, + .timeout = 1000, /* Default timeout of 1 second */ +}; + +static struct resource orion_i2c_resources[] = { + { + .name = "i2c base", + .start = I2C_BASE, + .end = I2C_BASE + 0x20 -1, + .flags = IORESOURCE_MEM, + }, + { + .name = "i2c irq", + .start = IRQ_ORION_I2C, + .end = IRQ_ORION_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion_i2c = { + .name = MV64XXX_I2C_CTLR_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(orion_i2c_resources), + .resource = orion_i2c_resources, + .dev = { + .platform_data = &orion_i2c_pdata, + }, +}; + +/***************************************************************************** + * General + ****************************************************************************/ + +/* + * Identify device ID and rev from PCIE configuration header space '0'. + */ +static void orion_id(u32 *dev, u32 *rev, char **dev_name) +{ + orion_pcie_id(dev, rev); + + if (*dev == MV88F5281_DEV_ID) { + if (*rev == MV88F5281_REV_D2) { + *dev_name = "MV88F5281-D2"; + } else if (*rev == MV88F5281_REV_D1) { + *dev_name = "MV88F5281-D1"; + } else { + *dev_name = "MV88F5281-Rev-Unsupported"; + } + } else if (*dev == MV88F5182_DEV_ID) { + if (*rev == MV88F5182_REV_A2) { + *dev_name = "MV88F5182-A2"; + } else { + *dev_name = "MV88F5182-Rev-Unsupported"; + } + } else if (*dev == MV88F5181_DEV_ID) { + if (*rev == MV88F5181_REV_B1) { + *dev_name = "MV88F5181-Rev-B1"; + } else { + *dev_name = "MV88F5181-Rev-Unsupported"; + } + } else { + *dev_name = "Device-Unknown"; + } +} + +void __init orion_init(void) +{ + char *dev_name; + u32 dev, rev; + + orion_id(&dev, &rev, &dev_name); + printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION_TCLK); + + /* + * Setup Orion address map + */ + orion_setup_cpu_wins(); + orion_setup_usb_wins(); + orion_setup_eth_wins(); + orion_setup_pci_wins(); + orion_setup_pcie_wins(); + if (dev == MV88F5182_DEV_ID) + orion_setup_sata_wins(); + + /* + * REgister devices + */ + platform_device_register(&orion_uart); + platform_device_register(&orion_ehci0); + if (dev == MV88F5182_DEV_ID) + platform_device_register(&orion_ehci1); + platform_device_register(&orion_i2c); +} diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h new file mode 100644 index 000000000000..06c10c06f03e --- /dev/null +++ b/arch/arm/mach-orion/common.h @@ -0,0 +1,78 @@ +#ifndef __ARCH_ORION_COMMON_H__ +#define __ARCH_ORION_COMMON_H__ + +/* + * Basic Orion init functions used early by machine-setup. + */ + +void __init orion_map_io(void); +void __init orion_init_irq(void); +void __init orion_init(void); + +/* + * Enumerations and functions for Orion windows mapping. Used by Orion core + * functions to map its interfaces and by the machine-setup to map its on- + * board devices. Details in /mach-orion/addr-map.c + */ + +enum orion_target { + ORION_DEV_BOOT = 0, + ORION_DEV0, + ORION_DEV1, + ORION_DEV2, + ORION_PCIE_MEM, + ORION_PCIE_IO, + ORION_PCI_MEM, + ORION_PCI_IO, + ORION_DDR, + ORION_REGS, + ORION_MAX_TARGETS +}; + +void orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap); +void orion_setup_cpu_wins(void); +void orion_setup_eth_wins(void); +void orion_setup_usb_wins(void); +void orion_setup_pci_wins(void); +void orion_setup_pcie_wins(void); +void orion_setup_sata_wins(void); + +/* + * Shared code used internally by other Orion core functions. + * (/mach-orion/pci.c) + */ + +struct pci_sys_data; +struct pci_bus; + +void orion_pcie_id(u32 *dev, u32 *rev); +u32 orion_pcie_local_bus_nr(void); +u32 orion_pci_local_bus_nr(void); +u32 orion_pci_local_dev_nr(void); +int orion_pci_sys_setup(int nr, struct pci_sys_data *sys); +struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); +int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 *val); +int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 val); + +/* + * Valid GPIO pins according to MPP setup, used by machine-setup. + * (/mach-orion/gpio.c). + */ + +void __init orion_gpio_set_valid_pins(u32 pins); +void gpio_display(void); /* debug */ + +/* + * Orion system timer (clocksource + clockevnt, /mach-orion/time.c) + */ +extern struct sys_timer orion_timer; + +/* + * Pull in Orion Ethernet platform_data, used by machine-setup + */ + +struct mv643xx_eth_platform_data; + +void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data); + +#endif /* __ARCH_ORION_COMMON_H__ */ diff --git a/arch/arm/mach-orion/db88f5281-setup.c b/arch/arm/mach-orion/db88f5281-setup.c new file mode 100644 index 000000000000..cb2a95ce5b57 --- /dev/null +++ b/arch/arm/mach-orion/db88f5281-setup.c @@ -0,0 +1,364 @@ +/* + * arch/arm/mach-orion/db88f5281-setup.c + * + * Marvell Orion-2 Development Board Setup + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/timer.h> +#include <linux/mv643xx_eth.h> +#include <linux/i2c.h> +#include <asm/mach-types.h> +#include <asm/gpio.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <asm/arch/orion.h> +#include <asm/arch/platform.h> +#include "common.h" + +/***************************************************************************** + * DB-88F5281 on board devices + ****************************************************************************/ + +/* + * 512K NOR flash Device bus boot chip select + */ + +#define DB88F5281_NOR_BOOT_BASE 0xf4000000 +#define DB88F5281_NOR_BOOT_SIZE SZ_512K + +/* + * 7-Segment on Device bus chip select 0 + */ + +#define DB88F5281_7SEG_BASE 0xfa000000 +#define DB88F5281_7SEG_SIZE SZ_1K + +/* + * 32M NOR flash on Device bus chip select 1 + */ + +#define DB88F5281_NOR_BASE 0xfc000000 +#define DB88F5281_NOR_SIZE SZ_32M + +/* + * 32M NAND flash on Device bus chip select 2 + */ + +#define DB88F5281_NAND_BASE 0xfa800000 +#define DB88F5281_NAND_SIZE SZ_1K + +/* + * PCI + */ + +#define DB88F5281_PCI_SLOT0_OFFS 7 +#define DB88F5281_PCI_SLOT0_IRQ_PIN 12 +#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN 13 + +/***************************************************************************** + * 512M NOR Flash on Device bus Boot CS + ****************************************************************************/ + +static struct physmap_flash_data db88f5281_boot_flash_data = { + .width = 1, /* 8 bit bus width */ +}; + +static struct resource db88f5281_boot_flash_resource = { + .flags = IORESOURCE_MEM, + .start = DB88F5281_NOR_BOOT_BASE, + .end = DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device db88f5281_boot_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &db88f5281_boot_flash_data, + }, + .num_resources = 1, + .resource = &db88f5281_boot_flash_resource, +}; + +/***************************************************************************** + * 32M NOR Flash on Device bus CS1 + ****************************************************************************/ + +static struct physmap_flash_data db88f5281_nor_flash_data = { + .width = 4, /* 32 bit bus width */ +}; + +static struct resource db88f5281_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = DB88F5281_NOR_BASE, + .end = DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1, +}; + +static struct platform_device db88f5281_nor_flash = { + .name = "physmap-flash", + .id = 1, + .dev = { + .platform_data = &db88f5281_nor_flash_data, + }, + .num_resources = 1, + .resource = &db88f5281_nor_flash_resource, +}; + +/***************************************************************************** + * 32M NAND Flash on Device bus CS2 + ****************************************************************************/ + +static struct mtd_partition db88f5281_nand_parts[] = { + { + .name = "kernel", + .offset = 0, + .size = SZ_2M, + }, + { + .name = "root", + .offset = SZ_2M, + .size = (SZ_16M - SZ_2M), + }, + { + .name = "user", + .offset = SZ_16M, + .size = SZ_8M, + }, + { + .name = "recovery", + .offset = (SZ_16M + SZ_8M), + .size = SZ_8M, + }, +}; + +static struct resource db88f5281_nand_resource = { + .flags = IORESOURCE_MEM, + .start = DB88F5281_NAND_BASE, + .end = DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1, +}; + +static struct orion_nand_data db88f5281_nand_data = { + .parts = db88f5281_nand_parts, + .nr_parts = ARRAY_SIZE(db88f5281_nand_parts), + .cle = 0, + .ale = 1, + .width = 8, +}; + +static struct platform_device db88f5281_nand_flash = { + .name = "orion_nand", + .id = -1, + .dev = { + .platform_data = &db88f5281_nand_data, + }, + .resource = &db88f5281_nand_resource, + .num_resources = 1, +}; + +/***************************************************************************** + * 7-Segment on Device bus CS0 + * Dummy counter every 2 sec + ****************************************************************************/ + +static void __iomem *db88f5281_7seg; +static struct timer_list db88f5281_timer; + +static void db88f5281_7seg_event(unsigned long data) +{ + static int count = 0; + writel(0, db88f5281_7seg + (count << 4)); + count = (count + 1) & 7; + mod_timer(&db88f5281_timer, jiffies + 2 * HZ); +} + +static int __init db88f5281_7seg_init(void) +{ + if (machine_is_db88f5281()) { + db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE, + DB88F5281_7SEG_SIZE); + if (!db88f5281_7seg) { + printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n"); + return -EIO; + } + setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0); + mod_timer(&db88f5281_timer, jiffies + 2 * HZ); + } + + return 0; +} + +__initcall(db88f5281_7seg_init); + +/***************************************************************************** + * PCI + ****************************************************************************/ + +void __init db88f5281_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = DB88F5281_PCI_SLOT0_IRQ_PIN; + if (gpio_request(pin, "PCI Int1") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "db88f5281_pci_preinit faield to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin); + } + + pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN; + if (gpio_request(pin, "PCI Int2") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "db88f5281_pci_preinit faield " + "to set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin); + } +} + +static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* + * PCIE IRQ is connected internally (not GPIO) + */ + if (dev->bus->number == orion_pcie_local_bus_nr()) + return IRQ_ORION_PCIE0_INT; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - DB88F5281_PCI_SLOT0_OFFS) { + case 0: + return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN); + case 1: + case 2: + return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN); + default: + return -1; + } +} + +static struct hw_pci db88f5281_pci __initdata = { + .nr_controllers = 2, + .preinit = db88f5281_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = orion_pci_sys_setup, + .scan = orion_pci_sys_scan_bus, + .map_irq = db88f5281_pci_map_irq, +}; + +static int __init db88f5281_pci_init(void) +{ + if (machine_is_db88f5281()) + pci_common_init(&db88f5281_pci); + + return 0; +} + +subsys_initcall(db88f5281_pci_init); + +/***************************************************************************** + * Ethernet + ****************************************************************************/ +static struct mv643xx_eth_platform_data db88f5281_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/***************************************************************************** + * RTC DS1339 on I2C bus + ****************************************************************************/ +static struct i2c_board_info __initdata db88f5281_i2c_rtc = { + .driver_name = "rtc-ds1307", + .type = "ds1339", + .addr = 0x68, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static struct platform_device *db88f5281_devs[] __initdata = { + &db88f5281_boot_flash, + &db88f5281_nor_flash, + &db88f5281_nand_flash, +}; + +static void __init db88f5281_init(void) +{ + /* + * Basic Orion setup. Need to be called early. + */ + orion_init(); + + /* + * Setup the CPU address decode windows for our on-board devices + */ + orion_setup_cpu_win(ORION_DEV_BOOT, DB88F5281_NOR_BOOT_BASE, + DB88F5281_NOR_BOOT_SIZE, -1); + orion_setup_cpu_win(ORION_DEV0, DB88F5281_7SEG_BASE, + DB88F5281_7SEG_SIZE, -1); + orion_setup_cpu_win(ORION_DEV1, DB88F5281_NOR_BASE, + DB88F5281_NOR_SIZE, -1); + orion_setup_cpu_win(ORION_DEV2, DB88F5281_NAND_BASE, + DB88F5281_NAND_SIZE, -1); + + /* + * Setup Multiplexing Pins: + * MPP0: GPIO (USB Over Current) MPP1: GPIO (USB Vbat input) + * MPP2: PCI_REQn[2] MPP3: PCI_GNTn[2] + * MPP4: PCI_REQn[3] MPP5: PCI_GNTn[3] + * MPP6: GPIO (JP0, CON17.2) MPP7: GPIO (JP1, CON17.1) + * MPP8: GPIO (JP2, CON11.2) MPP9: GPIO (JP3, CON11.3) + * MPP10: GPIO (RTC int) MPP11: GPIO (Baud Rate Generator) + * MPP12: GPIO (PCI int 1) MPP13: GPIO (PCI int 2) + * MPP14: NAND_REn[2] MPP15: NAND_WEn[2] + * MPP16: UART1_RX MPP17: UART1_TX + * MPP18: UART1_CTS MPP19: UART1_RTS + * MPP-DEV: DEV_D[16:31] + */ + orion_write(MPP_0_7_CTRL, 0x00222203); + orion_write(MPP_8_15_CTRL, 0x44000000); + orion_write(MPP_16_19_CTRL, 0); + orion_write(MPP_DEV_CTRL, 0); + + orion_gpio_set_valid_pins(0x00003fc3); + + platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs)); + i2c_register_board_info(0, &db88f5281_i2c_rtc, 1); + orion_eth_init(&db88f5281_eth_data); +} + +MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") + /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */ + .phys_io = ORION_REGS_BASE, + .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = db88f5281_init, + .map_io = orion_map_io, + .init_irq = orion_init_irq, + .timer = &orion_timer, +MACHINE_END diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion/dns323-setup.c new file mode 100644 index 000000000000..c8a806f249c6 --- /dev/null +++ b/arch/arm/mach-orion/dns323-setup.c @@ -0,0 +1,322 @@ +/* + * arch/arm/mach-orion/dns323-setup.c + * + * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/mv643xx_eth.h> +#include <linux/leds.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <asm/mach-types.h> +#include <asm/gpio.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <asm/arch/orion.h> +#include <asm/arch/platform.h> +#include "common.h" + +#define DNS323_GPIO_LED_RIGHT_AMBER 1 +#define DNS323_GPIO_LED_LEFT_AMBER 2 +#define DNS323_GPIO_LED_POWER 5 +#define DNS323_GPIO_OVERTEMP 6 +#define DNS323_GPIO_RTC 7 +#define DNS323_GPIO_POWER_OFF 8 +#define DNS323_GPIO_KEY_POWER 9 +#define DNS323_GPIO_KEY_RESET 10 + +/**************************************************************************** + * PCI setup + */ + +static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* PCI-E */ + if (dev->bus->number == orion_pcie_local_bus_nr()) + return IRQ_ORION_PCIE0_INT; + + pr_err("%s: requested mapping for unknown bus\n", __func__); + + return -1; +} + +static struct hw_pci dns323_pci __initdata = { + .nr_controllers = 1, + .swizzle = pci_std_swizzle, + .setup = orion_pci_sys_setup, + .scan = orion_pci_sys_scan_bus, + .map_irq = dns323_pci_map_irq, +}; + +static int __init dns323_pci_init(void) +{ + if (machine_is_dns323()) + pci_common_init(&dns323_pci); + + return 0; +} + +subsys_initcall(dns323_pci_init); + +/**************************************************************************** + * Ethernet + */ + +static struct mv643xx_eth_platform_data dns323_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/**************************************************************************** + * 8MiB NOR flash (Spansion S29GL064M90TFIR4) + * + * Layout as used by D-Link: + * 0x00000000-0x00010000 : "MTD1" + * 0x00010000-0x00020000 : "MTD2" + * 0x00020000-0x001a0000 : "Linux Kernel" + * 0x001a0000-0x007d0000 : "File System" + * 0x007d0000-0x00800000 : "u-boot" + */ + +#define DNS323_NOR_BOOT_BASE 0xf4000000 +#define DNS323_NOR_BOOT_SIZE SZ_8M + +static struct mtd_partition dns323_partitions[] = { + { + .name = "MTD1", + .size = 0x00010000, + .offset = 0, + }, { + .name = "MTD2", + .size = 0x00010000, + .offset = 0x00010000, + }, { + .name = "Linux Kernel", + .size = 0x00180000, + .offset = 0x00020000, + }, { + .name = "File System", + .size = 0x00630000, + .offset = 0x001A0000, + }, { + .name = "u-boot", + .size = 0x00030000, + .offset = 0x007d0000, + } +}; + +static struct physmap_flash_data dns323_nor_flash_data = { + .width = 1, + .parts = dns323_partitions, + .nr_parts = ARRAY_SIZE(dns323_partitions) +}; + +static struct resource dns323_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = DNS323_NOR_BOOT_BASE, + .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device dns323_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { .platform_data = &dns323_nor_flash_data, }, + .resource = &dns323_nor_flash_resource, + .num_resources = 1, +}; + +/**************************************************************************** + * GPIO LEDs (simple - doesn't use hardware blinking support) + */ + +static struct gpio_led dns323_leds[] = { + { + .name = "power:blue", + .gpio = DNS323_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "right:amber", + .gpio = DNS323_GPIO_LED_RIGHT_AMBER, + .active_low = 1, + }, { + .name = "left:amber", + .gpio = DNS323_GPIO_LED_LEFT_AMBER, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dns323_led_data = { + .num_leds = ARRAY_SIZE(dns323_leds), + .leds = dns323_leds, +}; + +static struct platform_device dns323_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { .platform_data = &dns323_led_data, }, +}; + +/**************************************************************************** + * GPIO Attached Keys + */ + +static struct gpio_keys_button dns323_buttons[] = { + { + .code = KEY_RESTART, + .gpio = DNS323_GPIO_KEY_RESET, + .desc = "Reset Button", + .active_low = 1, + }, + { + .code = KEY_POWER, + .gpio = DNS323_GPIO_KEY_POWER, + .desc = "Power Button", + .active_low = 1, + } +}; + +static struct gpio_keys_platform_data dns323_button_data = { + .buttons = dns323_buttons, + .nbuttons = ARRAY_SIZE(dns323_buttons), +}; + +static struct platform_device dns323_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { .platform_data = &dns323_button_data, }, +}; + +/**************************************************************************** + * General Setup + */ + +static struct platform_device *dns323_plat_devices[] __initdata = { + &dns323_nor_flash, + &dns323_gpio_leds, + &dns323_button_device, +}; + +/* + * On the DNS-323 the following devices are attached via I2C: + * + * i2c addr | chip | description + * 0x3e | GMT G760Af | fan speed PWM controller + * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) + * 0x68 | ST M41T80 | RTC w/ alarm + */ +static struct i2c_board_info __initdata dns323_i2c_devices[] = { + { + I2C_BOARD_INFO("g760a", 0x3e), + .type = "g760a", + }, +#if 0 + /* this entry requires the new-style driver model lm75 driver, + * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */ + { + I2C_BOARD_INFO("lm75", 0x48), + .type = "g751", + }, +#endif + { + I2C_BOARD_INFO("rtc-m41t80", 0x68), + .type = "m41t80", + } +}; + +/* DNS-323 specific power off method */ +static void dns323_power_off(void) +{ + pr_info("%s: triggering power-off...\n", __func__); + gpio_set_value(DNS323_GPIO_POWER_OFF, 1); +} + +static void __init dns323_init(void) +{ + /* Setup basic Orion functions. Need to be called early. */ + orion_init(); + + /* setup flash mapping + * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 + */ + orion_setup_cpu_win(ORION_DEV_BOOT, DNS323_NOR_BOOT_BASE, + DNS323_NOR_BOOT_SIZE, -1); + + /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE + * + * Open a special address decode windows for the PCIE WA. + */ + orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE); + orion_write(ORION_REGS_BASE | 0x20070, + (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); + + /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */ + orion_write(MPP_0_7_CTRL, 0); + orion_write(MPP_8_15_CTRL, 0); + orion_write(MPP_16_19_CTRL, 0); + orion_write(MPP_DEV_CTRL, 0); + + /* Define used GPIO pins + + GPIO Map: + + | 0 | | PEX_RST_OUT (not controlled by GPIO) + | 1 | Out | right amber LED (= sata ch0 LED) (low-active) + | 2 | Out | left amber LED (= sata ch1 LED) (low-active) + | 3 | Out | //unknown// + | 4 | Out | power button LED (low-active, together with pin #5) + | 5 | Out | power button LED (low-active, together with pin #4) + | 6 | In | GMT G751-2f overtemp. shutdown signal (low-active) + | 7 | In | M41T80 nIRQ/OUT/SQW signal + | 8 | Out | triggers power off (high-active) + | 9 | In | power button switch (low-active) + | 10 | In | reset button switch (low-active) + | 11 | Out | //unknown// + | 12 | Out | //unknown// + | 13 | Out | //unknown// + | 14 | Out | //unknown// + | 15 | Out | //unknown// + */ + orion_gpio_set_valid_pins(0x07f6); + + /* register dns323 specific power-off method */ + if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0) + || (gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)) + pr_err("DNS323: failed to setup power-off GPIO\n"); + + pm_power_off = dns323_power_off; + + /* register flash and other platform devices */ + platform_add_devices(dns323_plat_devices, + ARRAY_SIZE(dns323_plat_devices)); + + i2c_register_board_info(0, dns323_i2c_devices, + ARRAY_SIZE(dns323_i2c_devices)); + + orion_eth_init(&dns323_eth_data); +} + +/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ +MACHINE_START(DNS323, "D-Link DNS-323") + /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ + .phys_io = ORION_REGS_BASE, + .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = dns323_init, + .map_io = orion_map_io, + .init_irq = orion_init_irq, + .timer = &orion_timer, +MACHINE_END diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion/gpio.c new file mode 100644 index 000000000000..d5f00c86d616 --- /dev/null +++ b/arch/arm/mach-orion/gpio.c @@ -0,0 +1,225 @@ +/* + * arch/arm/mach-orion/gpio.c + * + * GPIO functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/bitops.h> +#include <asm/gpio.h> +#include <asm/arch/orion.h> +#include "common.h" + +static DEFINE_SPINLOCK(gpio_lock); +static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)]; +static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */ + +void __init orion_gpio_set_valid_pins(u32 pins) +{ + gpio_valid[0] = pins; +} + +/* + * GENERIC_GPIO primitives + */ +int gpio_direction_input(unsigned pin) +{ + unsigned long flags; + + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin); + return -EINVAL; + } + + spin_lock_irqsave(&gpio_lock, flags); + + /* + * Some callers might have not used the gpio_request(), + * so flag this pin as requested now. + */ + if (!gpio_label[pin]) + gpio_label[pin] = "?"; + + orion_setbits(GPIO_IO_CONF, 1 << pin); + + spin_unlock_irqrestore(&gpio_lock, flags); + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + +int gpio_direction_output(unsigned pin, int value) +{ + unsigned long flags; + int mask; + + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin); + return -EINVAL; + } + + spin_lock_irqsave(&gpio_lock, flags); + + /* + * Some callers might have not used the gpio_request(), + * so flag this pin as requested now. + */ + if (!gpio_label[pin]) + gpio_label[pin] = "?"; + + mask = 1 << pin; + orion_clrbits(GPIO_BLINK_EN, mask); + if (value) + orion_setbits(GPIO_OUT, mask); + else + orion_clrbits(GPIO_OUT, mask); + orion_clrbits(GPIO_IO_CONF, mask); + + spin_unlock_irqrestore(&gpio_lock, flags); + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + +int gpio_get_value(unsigned pin) +{ + int val, mask = 1 << pin; + + if (orion_read(GPIO_IO_CONF) & mask) + val = orion_read(GPIO_DATA_IN) ^ orion_read(GPIO_IN_POL); + else + val = orion_read(GPIO_OUT); + + return val & mask; +} +EXPORT_SYMBOL(gpio_get_value); + +void gpio_set_value(unsigned pin, int value) +{ + unsigned long flags; + int mask = 1 << pin; + + spin_lock_irqsave(&gpio_lock, flags); + + orion_clrbits(GPIO_BLINK_EN, mask); + if (value) + orion_setbits(GPIO_OUT, mask); + else + orion_clrbits(GPIO_OUT, mask); + + spin_unlock_irqrestore(&gpio_lock, flags); +} +EXPORT_SYMBOL(gpio_set_value); + +void orion_gpio_set_blink(unsigned pin, int blink) +{ + unsigned long flags; + int mask = 1 << pin; + + spin_lock_irqsave(&gpio_lock, flags); + + orion_clrbits(GPIO_OUT, mask); + if (blink) + orion_setbits(GPIO_BLINK_EN, mask); + else + orion_clrbits(GPIO_BLINK_EN, mask); + + spin_unlock_irqrestore(&gpio_lock, flags); +} +EXPORT_SYMBOL(orion_gpio_set_blink); + +int gpio_request(unsigned pin, const char *label) +{ + int ret = 0; + unsigned long flags; + + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin); + return -EINVAL; + } + + spin_lock_irqsave(&gpio_lock, flags); + + if (gpio_label[pin]) { + pr_debug("%s: GPIO %d already used as %s\n", + __FUNCTION__, pin, gpio_label[pin]); + ret = -EBUSY; + } else + gpio_label[pin] = label ? label : "?"; + + spin_unlock_irqrestore(&gpio_lock, flags); + return ret; +} +EXPORT_SYMBOL(gpio_request); + +void gpio_free(unsigned pin) +{ + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin); + return; + } + + if (!gpio_label[pin]) + pr_warning("%s: GPIO %d already freed\n", __FUNCTION__, pin); + else + gpio_label[pin] = NULL; +} +EXPORT_SYMBOL(gpio_free); + +/* Debug helper */ +void gpio_display(void) +{ + int i; + + for (i = 0; i < GPIO_MAX; i++) { + printk(KERN_DEBUG "Pin-%d: ", i); + + if (!test_bit(i, gpio_valid)) { + printk("non-GPIO\n"); + } else if (!gpio_label[i]) { + printk("GPIO, free\n"); + } else { + printk("GPIO, used by %s, ", gpio_label[i]); + if (orion_read(GPIO_IO_CONF) & (1 << i)) { + printk("input, active %s, level %s, edge %s\n", + ((orion_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high", + ((orion_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked", + ((orion_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked"); + } else { + printk("output, val=%d\n", (orion_read(GPIO_OUT) >> i) & 1); + } + } + } + + printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n", + MPP_0_7_CTRL, orion_read(MPP_0_7_CTRL)); + printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n", + MPP_8_15_CTRL, orion_read(MPP_8_15_CTRL)); + printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n", + MPP_16_19_CTRL, orion_read(MPP_16_19_CTRL)); + printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n", + MPP_DEV_CTRL, orion_read(MPP_DEV_CTRL)); + printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n", + GPIO_OUT, orion_read(GPIO_OUT)); + printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n", + GPIO_IO_CONF, orion_read(GPIO_IO_CONF)); + printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n", + GPIO_BLINK_EN, orion_read(GPIO_BLINK_EN)); + printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n", + GPIO_IN_POL, orion_read(GPIO_IN_POL)); + printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n", + GPIO_DATA_IN, orion_read(GPIO_DATA_IN)); + printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n", + GPIO_LEVEL_MASK, orion_read(GPIO_LEVEL_MASK)); + printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n", + GPIO_EDGE_CAUSE, orion_read(GPIO_EDGE_CAUSE)); + printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n", + GPIO_EDGE_MASK, orion_read(GPIO_EDGE_MASK)); +} diff --git a/arch/arm/mach-orion/irq.c b/arch/arm/mach-orion/irq.c new file mode 100644 index 000000000000..df7e12ad378b --- /dev/null +++ b/arch/arm/mach-orion/irq.c @@ -0,0 +1,241 @@ +/* + * arch/arm/mach-orion/irq.c + * + * Core IRQ functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/gpio.h> +#include <asm/arch/orion.h> +#include "common.h" + +/***************************************************************************** + * Orion GPIO IRQ + * + * GPIO_IN_POL register controlls whether GPIO_DATA_IN will hold the same + * value of the line or the opposite value. + * + * Level IRQ handlers: DATA_IN is used directly as cause register. + * Interrupt are masked by LEVEL_MASK registers. + * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE. + * Interrupt are masked by EDGE_MASK registers. + * Both-edge handlers: Similar to regular Edge handlers, but also swaps + * the polarity to catch the next line transaction. + * This is a race condition that might not perfectly + * work on some use cases. + * + * Every eight GPIO lines are grouped (OR'ed) before going up to main + * cause register. + * + * EDGE cause mask + * data-in /--------| |-----| |----\ + * -----| |----- ---- to main cause reg + * X \----------------| |----/ + * polarity LEVEL mask + * + ****************************************************************************/ +static void orion_gpio_irq_ack(u32 irq) +{ + int pin = irq_to_gpio(irq); + if (irq_desc[irq].status & IRQ_LEVEL) + /* + * Mask bit for level interrupt + */ + orion_clrbits(GPIO_LEVEL_MASK, 1 << pin); + else + /* + * Clear casue bit for egde interrupt + */ + orion_clrbits(GPIO_EDGE_CAUSE, 1 << pin); +} + +static void orion_gpio_irq_mask(u32 irq) +{ + int pin = irq_to_gpio(irq); + if (irq_desc[irq].status & IRQ_LEVEL) + orion_clrbits(GPIO_LEVEL_MASK, 1 << pin); + else + orion_clrbits(GPIO_EDGE_MASK, 1 << pin); +} + +static void orion_gpio_irq_unmask(u32 irq) +{ + int pin = irq_to_gpio(irq); + if (irq_desc[irq].status & IRQ_LEVEL) + orion_setbits(GPIO_LEVEL_MASK, 1 << pin); + else + orion_setbits(GPIO_EDGE_MASK, 1 << pin); +} + +static int orion_gpio_set_irq_type(u32 irq, u32 type) +{ + int pin = irq_to_gpio(irq); + struct irq_desc *desc; + + if ((orion_read(GPIO_IO_CONF) & (1 << pin)) == 0) { + printk(KERN_ERR "orion_gpio_set_irq_type failed " + "(irq %d, pin %d).\n", irq, pin); + return -EINVAL; + } + + desc = irq_desc + irq; + + switch (type) { + case IRQT_HIGH: + desc->handle_irq = handle_level_irq; + desc->status |= IRQ_LEVEL; + orion_clrbits(GPIO_IN_POL, (1 << pin)); + break; + case IRQT_LOW: + desc->handle_irq = handle_level_irq; + desc->status |= IRQ_LEVEL; + orion_setbits(GPIO_IN_POL, (1 << pin)); + break; + case IRQT_RISING: + desc->handle_irq = handle_edge_irq; + desc->status &= ~IRQ_LEVEL; + orion_clrbits(GPIO_IN_POL, (1 << pin)); + break; + case IRQT_FALLING: + desc->handle_irq = handle_edge_irq; + desc->status &= ~IRQ_LEVEL; + orion_setbits(GPIO_IN_POL, (1 << pin)); + break; + case IRQT_BOTHEDGE: + desc->handle_irq = handle_edge_irq; + desc->status &= ~IRQ_LEVEL; + /* + * set initial polarity based on current input level + */ + if ((orion_read(GPIO_IN_POL) ^ orion_read(GPIO_DATA_IN)) + & (1 << pin)) + orion_setbits(GPIO_IN_POL, (1 << pin)); /* falling */ + else + orion_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */ + + break; + default: + printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type); + return -EINVAL; + } + + desc->status &= ~IRQ_TYPE_SENSE_MASK; + desc->status |= type & IRQ_TYPE_SENSE_MASK; + + return 0; +} + +static struct irq_chip orion_gpio_irq_chip = { + .name = "Orion-IRQ-GPIO", + .ack = orion_gpio_irq_ack, + .mask = orion_gpio_irq_mask, + .unmask = orion_gpio_irq_unmask, + .set_type = orion_gpio_set_irq_type, +}; + +static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + u32 cause, offs, pin; + + BUG_ON(irq < IRQ_ORION_GPIO_0_7 || irq > IRQ_ORION_GPIO_24_31); + offs = (irq - IRQ_ORION_GPIO_0_7) * 8; + cause = (orion_read(GPIO_DATA_IN) & orion_read(GPIO_LEVEL_MASK)) | + (orion_read(GPIO_EDGE_CAUSE) & orion_read(GPIO_EDGE_MASK)); + + for (pin = offs; pin < offs + 8; pin++) { + if (cause & (1 << pin)) { + irq = gpio_to_irq(pin); + desc = irq_desc + irq; + if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { + /* Swap polarity (race with GPIO line) */ + u32 polarity = orion_read(GPIO_IN_POL); + polarity ^= 1 << pin; + orion_write(GPIO_IN_POL, polarity); + } + desc_handle_irq(irq, desc); + } + } +} + +static void __init orion_init_gpio_irq(void) +{ + int i; + struct irq_desc *desc; + + /* + * Mask and clear GPIO IRQ interrupts + */ + orion_write(GPIO_LEVEL_MASK, 0x0); + orion_write(GPIO_EDGE_MASK, 0x0); + orion_write(GPIO_EDGE_CAUSE, 0x0); + + /* + * Register chained level handlers for GPIO IRQs by default. + * User can use set_type() if he wants to use edge types handlers. + */ + for (i = IRQ_ORION_GPIO_START; i < NR_IRQS; i++) { + set_irq_chip(i, &orion_gpio_irq_chip); + set_irq_handler(i, handle_level_irq); + desc = irq_desc + i; + desc->status |= IRQ_LEVEL; + set_irq_flags(i, IRQF_VALID); + } + set_irq_chained_handler(IRQ_ORION_GPIO_0_7, orion_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION_GPIO_8_15, orion_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION_GPIO_16_23, orion_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION_GPIO_24_31, orion_gpio_irq_handler); +} + +/***************************************************************************** + * Orion Main IRQ + ****************************************************************************/ +static void orion_main_irq_mask(u32 irq) +{ + orion_clrbits(MAIN_IRQ_MASK, 1 << irq); +} + +static void orion_main_irq_unmask(u32 irq) +{ + orion_setbits(MAIN_IRQ_MASK, 1 << irq); +} + +static struct irq_chip orion_main_irq_chip = { + .name = "Orion-IRQ-Main", + .ack = orion_main_irq_mask, + .mask = orion_main_irq_mask, + .unmask = orion_main_irq_unmask, +}; + +static void __init orion_init_main_irq(void) +{ + int i; + + /* + * Mask and clear Main IRQ interrupts + */ + orion_write(MAIN_IRQ_MASK, 0x0); + orion_write(MAIN_IRQ_CAUSE, 0x0); + + /* + * Register level handler for Main IRQs + */ + for (i = 0; i < IRQ_ORION_GPIO_START; i++) { + set_irq_chip(i, &orion_main_irq_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } +} + +void __init orion_init_irq(void) +{ + orion_init_main_irq(); + orion_init_gpio_irq(); +} diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c new file mode 100644 index 000000000000..2d812ed6b5c7 --- /dev/null +++ b/arch/arm/mach-orion/kurobox_pro-setup.c @@ -0,0 +1,234 @@ +/* + * arch/arm/mach-orion/kurobox_pro-setup.c + * + * Maintainer: Ronen Shitrit <rshitrit@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/mv643xx_eth.h> +#include <linux/i2c.h> +#include <asm/mach-types.h> +#include <asm/gpio.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <asm/arch/orion.h> +#include <asm/arch/platform.h> +#include "common.h" + +/***************************************************************************** + * KUROBOX-PRO Info + ****************************************************************************/ + +/* + * 256K NOR flash Device bus boot chip select + */ + +#define KUROBOX_PRO_NOR_BOOT_BASE 0xf4000000 +#define KUROBOX_PRO_NOR_BOOT_SIZE SZ_256K + +/* + * 256M NAND flash on Device bus chip select 1 + */ + +#define KUROBOX_PRO_NAND_BASE 0xfc000000 +#define KUROBOX_PRO_NAND_SIZE SZ_2M + +/***************************************************************************** + * 256MB NAND Flash on Device bus CS0 + ****************************************************************************/ + +static struct mtd_partition kurobox_pro_nand_parts[] = { + { + .name = "uImage", + .offset = 0, + .size = SZ_4M, + }, + { + .name = "rootfs", + .offset = SZ_4M, + .size = SZ_64M, + }, + { + .name = "extra", + .offset = SZ_4M + SZ_64M, + .size = SZ_256M - (SZ_4M + SZ_64M), + }, +}; + +static struct resource kurobox_pro_nand_resource = { + .flags = IORESOURCE_MEM, + .start = KUROBOX_PRO_NAND_BASE, + .end = KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1, +}; + +static struct orion_nand_data kurobox_pro_nand_data = { + .parts = kurobox_pro_nand_parts, + .nr_parts = ARRAY_SIZE(kurobox_pro_nand_parts), + .cle = 0, + .ale = 1, + .width = 8, +}; + +static struct platform_device kurobox_pro_nand_flash = { + .name = "orion_nand", + .id = -1, + .dev = { + .platform_data = &kurobox_pro_nand_data, + }, + .resource = &kurobox_pro_nand_resource, + .num_resources = 1, +}; + +/***************************************************************************** + * 256KB NOR Flash on BOOT Device + ****************************************************************************/ + +static struct physmap_flash_data kurobox_pro_nor_flash_data = { + .width = 1, +}; + +static struct resource kurobox_pro_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = KUROBOX_PRO_NOR_BOOT_BASE, + .end = KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device kurobox_pro_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &kurobox_pro_nor_flash_data, + }, + .num_resources = 1, + .resource = &kurobox_pro_nor_flash_resource, +}; + +/***************************************************************************** + * PCI + ****************************************************************************/ + +static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* + * PCI isn't used on the Kuro + */ + if (dev->bus->number == orion_pcie_local_bus_nr()) + return IRQ_ORION_PCIE0_INT; + else + printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n"); + + return -1; +} + +static struct hw_pci kurobox_pro_pci __initdata = { + .nr_controllers = 1, + .swizzle = pci_std_swizzle, + .setup = orion_pci_sys_setup, + .scan = orion_pci_sys_scan_bus, + .map_irq = kurobox_pro_pci_map_irq, +}; + +static int __init kurobox_pro_pci_init(void) +{ + if (machine_is_kurobox_pro()) + pci_common_init(&kurobox_pro_pci); + + return 0; +} + +subsys_initcall(kurobox_pro_pci_init); + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data kurobox_pro_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/***************************************************************************** + * RTC 5C372a on I2C bus + ****************************************************************************/ +static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = { + .driver_name = "rtc-rs5c372", + .type = "rs5c372a", + .addr = 0x32, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static struct platform_device *kurobox_pro_devices[] __initdata = { + &kurobox_pro_nor_flash, + &kurobox_pro_nand_flash, +}; + +static void __init kurobox_pro_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion_init(); + + /* + * Setup the CPU address decode windows for our devices + */ + orion_setup_cpu_win(ORION_DEV_BOOT, KUROBOX_PRO_NOR_BOOT_BASE, + KUROBOX_PRO_NOR_BOOT_SIZE, -1); + orion_setup_cpu_win(ORION_DEV0, KUROBOX_PRO_NAND_BASE, + KUROBOX_PRO_NAND_SIZE, -1); + /* + * Open a special address decode windows for the PCIE WA. + */ + orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE); + orion_write(ORION_REGS_BASE | 0x20070, (0x7941 | + (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); + + /* + * Setup Multiplexing Pins -- + * MPP[0-1] Not used + * MPP[2] GPIO Micon + * MPP[3] GPIO RTC + * MPP[4-5] Not used + * MPP[6] Nand Flash REn + * MPP[7] Nand Flash WEn + * MPP[8-11] Not used + * MPP[12] SATA 0 presence Indication + * MPP[13] SATA 1 presence Indication + * MPP[14] SATA 0 active Indication + * MPP[15] SATA 1 active indication + * MPP[16-19] Not used + */ + orion_write(MPP_0_7_CTRL, 0x44220003); + orion_write(MPP_8_15_CTRL, 0x55550000); + orion_write(MPP_16_19_CTRL, 0x0); + + orion_gpio_set_valid_pins(0x0000000c); + + platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices)); + i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1); + orion_eth_init(&kurobox_pro_eth_data); +} + +MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") + /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ + .phys_io = ORION_REGS_BASE, + .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = kurobox_pro_init, + .map_io = orion_map_io, + .init_irq = orion_init_irq, + .timer = &orion_timer, +MACHINE_END diff --git a/arch/arm/mach-orion/pci.c b/arch/arm/mach-orion/pci.c new file mode 100644 index 000000000000..0498d7c69b30 --- /dev/null +++ b/arch/arm/mach-orion/pci.c @@ -0,0 +1,557 @@ +/* + * arch/arm/mach-orion/pci.c + * + * PCI and PCIE functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <asm/mach/pci.h> +#include "common.h" + +/***************************************************************************** + * Orion has one PCIE controller and one PCI controller. + * + * Note1: The local PCIE bus number is '0'. The local PCI bus number + * follows the scanned PCIE bridged busses, if any. + * + * Note2: It is possible for PCI/PCIE agents to access many subsystem's + * space, by configuring BARs and Address Decode Windows, e.g. flashes on + * device bus, Orion registers, etc. However this code only enable the + * access to DDR banks. + ****************************************************************************/ + + +/***************************************************************************** + * PCIE controller + ****************************************************************************/ +#define PCIE_CTRL ORION_PCIE_REG(0x1a00) +#define PCIE_STAT ORION_PCIE_REG(0x1a04) +#define PCIE_DEV_ID ORION_PCIE_REG(0x0000) +#define PCIE_CMD_STAT ORION_PCIE_REG(0x0004) +#define PCIE_DEV_REV ORION_PCIE_REG(0x0008) +#define PCIE_MASK ORION_PCIE_REG(0x1910) +#define PCIE_CONF_ADDR ORION_PCIE_REG(0x18f8) +#define PCIE_CONF_DATA ORION_PCIE_REG(0x18fc) + +/* + * PCIE_STAT bits + */ +#define PCIE_STAT_LINK_DOWN 1 +#define PCIE_STAT_BUS_OFFS 8 +#define PCIE_STAT_BUS_MASK (0xff << PCIE_STAT_BUS_OFFS) +#define PCIE_STAT_DEV_OFFS 20 +#define PCIE_STAT_DEV_MASK (0x1f << PCIE_STAT_DEV_OFFS) + +/* + * PCIE_CONF_ADDR bits + */ +#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 24) | ((r) & 0xfc)) +#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8) +#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) +#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) +#define PCIE_CONF_ADDR_EN (1 << 31) + +/* + * PCIE config cycles are done by programming the PCIE_CONF_ADDR register + * and then reading the PCIE_CONF_DATA register. Need to make sure these + * transactions are atomic. + */ +static DEFINE_SPINLOCK(orion_pcie_lock); + +void orion_pcie_id(u32 *dev, u32 *rev) +{ + *dev = orion_read(PCIE_DEV_ID) >> 16; + *rev = orion_read(PCIE_DEV_REV) & 0xff; +} + +u32 orion_pcie_local_bus_nr(void) +{ + u32 stat = orion_read(PCIE_STAT); + return((stat & PCIE_STAT_BUS_MASK) >> PCIE_STAT_BUS_OFFS); +} + +static u32 orion_pcie_local_dev_nr(void) +{ + u32 stat = orion_read(PCIE_STAT); + return((stat & PCIE_STAT_DEV_MASK) >> PCIE_STAT_DEV_OFFS); +} + +static u32 orion_pcie_no_link(void) +{ + u32 stat = orion_read(PCIE_STAT); + return(stat & PCIE_STAT_LINK_DOWN); +} + +static void orion_pcie_set_bus_nr(int nr) +{ + orion_clrbits(PCIE_STAT, PCIE_STAT_BUS_MASK); + orion_setbits(PCIE_STAT, nr << PCIE_STAT_BUS_OFFS); +} + +static void orion_pcie_master_slave_enable(void) +{ + orion_setbits(PCIE_CMD_STAT, PCI_COMMAND_MASTER | + PCI_COMMAND_IO | + PCI_COMMAND_MEMORY); +} + +static void orion_pcie_enable_interrupts(void) +{ + /* + * Enable interrupts lines + * INTA[24] INTB[25] INTC[26] INTD[27] + */ + orion_setbits(PCIE_MASK, 0xf<<24); +} + +static int orion_pcie_valid_config(u32 bus, u32 dev) +{ + /* + * Don't go out when trying to access -- + * 1. our own device + * 2. where there's no device connected (no link) + * 3. nonexisting devices on local bus + */ + + if ((orion_pcie_local_bus_nr() == bus) && + (orion_pcie_local_dev_nr() == dev)) + return 0; + + if (orion_pcie_no_link()) + return 0; + + if (bus == orion_pcie_local_bus_nr()) + if (((orion_pcie_local_dev_nr() == 0) && (dev != 1)) || + ((orion_pcie_local_dev_nr() != 0) && (dev != 0))) + return 0; + + return 1; +} + +static int orion_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + unsigned long flags; + unsigned int dev, rev, pcie_addr; + + if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + spin_lock_irqsave(&orion_pcie_lock, flags); + + orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN); + + orion_pcie_id(&dev, &rev); + if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { + /* extended register space */ + pcie_addr = ORION_PCIE_WA_BASE; + pcie_addr |= PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where); + *val = orion_read(pcie_addr); + } else + *val = orion_read(PCIE_CONF_DATA); + + if (size == 1) + *val = (*val >> (8*(where & 0x3))) & 0xff; + else if (size == 2) + *val = (*val >> (8*(where & 0x3))) & 0xffff; + + spin_unlock_irqrestore(&orion_pcie_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + + +static int orion_pcie_wr_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 val) +{ + unsigned long flags; + int ret; + + if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + spin_lock_irqsave(&orion_pcie_lock, flags); + + ret = PCIBIOS_SUCCESSFUL; + + orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN); + + if (size == 4) { + __raw_writel(val, PCIE_CONF_DATA); + } else if (size == 2) { + __raw_writew(val, PCIE_CONF_DATA + (where & 0x3)); + } else if (size == 1) { + __raw_writeb(val, PCIE_CONF_DATA + (where & 0x3)); + } else { + ret = PCIBIOS_BAD_REGISTER_NUMBER; + } + + spin_unlock_irqrestore(&orion_pcie_lock, flags); + + return ret; +} + +struct pci_ops orion_pcie_ops = { + .read = orion_pcie_rd_conf, + .write = orion_pcie_wr_conf, +}; + + +static int orion_pcie_setup(struct pci_sys_data *sys) +{ + struct resource *res; + + /* + * Master + Slave enable + */ + orion_pcie_master_slave_enable(); + + /* + * Enable interrupts lines A-D + */ + orion_pcie_enable_interrupts(); + + /* + * Request resource + */ + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("orion_pci_setup unable to alloc resources"); + + /* + * IORESOURCE_IO + */ + res[0].name = "PCI-EX I/O Space"; + res[0].flags = IORESOURCE_IO; + res[0].start = ORION_PCIE_IO_REMAP; + res[0].end = res[0].start + ORION_PCIE_IO_SIZE - 1; + if (request_resource(&ioport_resource, &res[0])) + panic("Request PCIE IO resource failed\n"); + sys->resource[0] = &res[0]; + + /* + * IORESOURCE_MEM + */ + res[1].name = "PCI-EX Memory Space"; + res[1].flags = IORESOURCE_MEM; + res[1].start = ORION_PCIE_MEM_BASE; + res[1].end = res[1].start + ORION_PCIE_MEM_SIZE - 1; + if (request_resource(&iomem_resource, &res[1])) + panic("Request PCIE Memory resource failed\n"); + sys->resource[1] = &res[1]; + + sys->resource[2] = NULL; + sys->io_offset = 0; + + return 1; +} + +/***************************************************************************** + * PCI controller + ****************************************************************************/ +#define PCI_MODE ORION_PCI_REG(0xd00) +#define PCI_CMD ORION_PCI_REG(0xc00) +#define PCI_P2P_CONF ORION_PCI_REG(0x1d14) +#define PCI_CONF_ADDR ORION_PCI_REG(0xc78) +#define PCI_CONF_DATA ORION_PCI_REG(0xc7c) + +/* + * PCI_MODE bits + */ +#define PCI_MODE_64BIT (1 << 2) +#define PCI_MODE_PCIX ((1 << 4) | (1 << 5)) + +/* + * PCI_CMD bits + */ +#define PCI_CMD_HOST_REORDER (1 << 29) + +/* + * PCI_P2P_CONF bits + */ +#define PCI_P2P_BUS_OFFS 16 +#define PCI_P2P_BUS_MASK (0xff << PCI_P2P_BUS_OFFS) +#define PCI_P2P_DEV_OFFS 24 +#define PCI_P2P_DEV_MASK (0x1f << PCI_P2P_DEV_OFFS) + +/* + * PCI_CONF_ADDR bits + */ +#define PCI_CONF_REG(reg) ((reg) & 0xfc) +#define PCI_CONF_FUNC(func) (((func) & 0x3) << 8) +#define PCI_CONF_DEV(dev) (((dev) & 0x1f) << 11) +#define PCI_CONF_BUS(bus) (((bus) & 0xff) << 16) +#define PCI_CONF_ADDR_EN (1 << 31) + +/* + * Internal configuration space + */ +#define PCI_CONF_FUNC_STAT_CMD 0 +#define PCI_CONF_REG_STAT_CMD 4 +#define PCIX_STAT 0x64 +#define PCIX_STAT_BUS_OFFS 8 +#define PCIX_STAT_BUS_MASK (0xff << PCIX_STAT_BUS_OFFS) + +/* + * PCI config cycles are done by programming the PCI_CONF_ADDR register + * and then reading the PCI_CONF_DATA register. Need to make sure these + * transactions are atomic. + */ +static DEFINE_SPINLOCK(orion_pci_lock); + +u32 orion_pci_local_bus_nr(void) +{ + u32 conf = orion_read(PCI_P2P_CONF); + return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS); +} + +u32 orion_pci_local_dev_nr(void) +{ + u32 conf = orion_read(PCI_P2P_CONF); + return((conf & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS); +} + +int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, + u32 where, u32 size, u32 *val) +{ + unsigned long flags; + spin_lock_irqsave(&orion_pci_lock, flags); + + orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | + PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | + PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); + + *val = orion_read(PCI_CONF_DATA); + + if (size == 1) + *val = (*val >> (8*(where & 0x3))) & 0xff; + else if (size == 2) + *val = (*val >> (8*(where & 0x3))) & 0xffff; + + spin_unlock_irqrestore(&orion_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func, + u32 where, u32 size, u32 val) +{ + unsigned long flags; + int ret = PCIBIOS_SUCCESSFUL; + + spin_lock_irqsave(&orion_pci_lock, flags); + + orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | + PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | + PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); + + if (size == 4) { + __raw_writel(val, PCI_CONF_DATA); + } else if (size == 2) { + __raw_writew(val, PCI_CONF_DATA + (where & 0x3)); + } else if (size == 1) { + __raw_writeb(val, PCI_CONF_DATA + (where & 0x3)); + } else { + ret = PCIBIOS_BAD_REGISTER_NUMBER; + } + + spin_unlock_irqrestore(&orion_pci_lock, flags); + + return ret; +} + +static int orion_pci_rd_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 *val) +{ + /* + * Don't go out for local device + */ + if ((orion_pci_local_bus_nr() == bus->number) && + (orion_pci_local_dev_nr() == PCI_SLOT(devfn))) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return orion_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where, size, val); +} + +static int orion_pci_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + /* + * Don't go out for local device + */ + if ((orion_pci_local_bus_nr() == bus->number) && + (orion_pci_local_dev_nr() == PCI_SLOT(devfn))) + return PCIBIOS_DEVICE_NOT_FOUND; + + return orion_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where, size, val); +} + +struct pci_ops orion_pci_ops = { + .read = orion_pci_rd_conf, + .write = orion_pci_wr_conf, +}; + +static void orion_pci_set_bus_nr(int nr) +{ + u32 p2p = orion_read(PCI_P2P_CONF); + + if (orion_read(PCI_MODE) & PCI_MODE_PCIX) { + /* + * PCI-X mode + */ + u32 pcix_status, bus, dev; + bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS; + dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS; + orion_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status); + pcix_status &= ~PCIX_STAT_BUS_MASK; + pcix_status |= (nr << PCIX_STAT_BUS_OFFS); + orion_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status); + } else { + /* + * PCI Conventional mode + */ + p2p &= ~PCI_P2P_BUS_MASK; + p2p |= (nr << PCI_P2P_BUS_OFFS); + orion_write(PCI_P2P_CONF, p2p); + } +} + +static void orion_pci_master_slave_enable(void) +{ + u32 bus_nr, dev_nr, func, reg, val; + + bus_nr = orion_pci_local_bus_nr(); + dev_nr = orion_pci_local_dev_nr(); + func = PCI_CONF_FUNC_STAT_CMD; + reg = PCI_CONF_REG_STAT_CMD; + orion_pci_hw_rd_conf(bus_nr, dev_nr, func, reg, 4, &val); + val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + orion_pci_hw_wr_conf(bus_nr, dev_nr, func, reg, 4, val | 0x7); +} + +static int orion_pci_setup(struct pci_sys_data *sys) +{ + struct resource *res; + + /* + * Master + Slave enable + */ + orion_pci_master_slave_enable(); + + /* + * Force ordering + */ + orion_setbits(PCI_CMD, PCI_CMD_HOST_REORDER); + + /* + * Request resources + */ + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("orion_pci_setup unable to alloc resources"); + + /* + * IORESOURCE_IO + */ + res[0].name = "PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + res[0].start = ORION_PCI_IO_REMAP; + res[0].end = res[0].start + ORION_PCI_IO_SIZE - 1; + if (request_resource(&ioport_resource, &res[0])) + panic("Request PCI IO resource failed\n"); + sys->resource[0] = &res[0]; + + /* + * IORESOURCE_MEM + */ + res[1].name = "PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + res[1].start = ORION_PCI_MEM_BASE; + res[1].end = res[1].start + ORION_PCI_MEM_SIZE - 1; + if (request_resource(&iomem_resource, &res[1])) + panic("Request PCI Memory resource failed\n"); + sys->resource[1] = &res[1]; + + sys->resource[2] = NULL; + sys->io_offset = 0; + + return 1; +} + + +/***************************************************************************** + * General PCIE + PCI + ****************************************************************************/ +int orion_pci_sys_setup(int nr, struct pci_sys_data *sys) +{ + int ret = 0; + + if (nr == 0) { + /* + * PCIE setup + */ + orion_pcie_set_bus_nr(0); + ret = orion_pcie_setup(sys); + } else if (nr == 1) { + /* + * PCI setup + */ + ret = orion_pci_setup(sys); + } + + return ret; +} + +struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys) +{ + struct pci_ops *ops; + struct pci_bus *bus; + + + if (nr == 0) { + u32 pci_bus; + /* + * PCIE scan + */ + ops = &orion_pcie_ops; + bus = pci_scan_bus(sys->busnr, ops, sys); + /* + * Set local PCI bus number to follow PCIE bridges (if any) + */ + pci_bus = bus->number + bus->subordinate - bus->secondary + 1; + orion_pci_set_bus_nr(pci_bus); + } else if (nr == 1) { + /* + * PCI scan + */ + ops = &orion_pci_ops; + bus = pci_scan_bus(sys->busnr, ops, sys); + } else { + BUG(); + bus = NULL; + } + + return bus; +} diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion/rd88f5182-setup.c new file mode 100644 index 000000000000..026d74325d01 --- /dev/null +++ b/arch/arm/mach-orion/rd88f5182-setup.c @@ -0,0 +1,306 @@ +/* + * arch/arm/mach-orion/rd88f5182-setup.c + * + * Marvell Orion-NAS Reference Design Setup + * + * Maintainer: Ronen Shitrit <rshitrit@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/mv643xx_eth.h> +#include <linux/i2c.h> +#include <asm/mach-types.h> +#include <asm/gpio.h> +#include <asm/leds.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <asm/arch/orion.h> +#include <asm/arch/platform.h> +#include "common.h" + +/***************************************************************************** + * RD-88F5182 Info + ****************************************************************************/ + +/* + * 512K NOR flash Device bus boot chip select + */ + +#define RD88F5182_NOR_BOOT_BASE 0xf4000000 +#define RD88F5182_NOR_BOOT_SIZE SZ_512K + +/* + * 16M NOR flash on Device bus chip select 1 + */ + +#define RD88F5182_NOR_BASE 0xfc000000 +#define RD88F5182_NOR_SIZE SZ_16M + +/* + * PCI + */ + +#define RD88F5182_PCI_SLOT0_OFFS 7 +#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7 +#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6 + +/* + * GPIO Debug LED + */ + +#define RD88F5182_GPIO_DBG_LED 0 + +/***************************************************************************** + * 16M NOR Flash on Device bus CS1 + ****************************************************************************/ + +static struct physmap_flash_data rd88f5182_nor_flash_data = { + .width = 1, +}; + +static struct resource rd88f5182_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = RD88F5182_NOR_BASE, + .end = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1, +}; + +static struct platform_device rd88f5182_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &rd88f5182_nor_flash_data, + }, + .num_resources = 1, + .resource = &rd88f5182_nor_flash_resource, +}; + +#ifdef CONFIG_LEDS + +/***************************************************************************** + * Use GPIO debug led as CPU active indication + ****************************************************************************/ + +static void rd88f5182_dbgled_event(led_event_t evt) +{ + int val; + + if (evt == led_idle_end) + val = 1; + else if (evt == led_idle_start) + val = 0; + else + return; + + gpio_set_value(RD88F5182_GPIO_DBG_LED, val); +} + +static int __init rd88f5182_dbgled_init(void) +{ + int pin; + + if (machine_is_rd88f5182()) { + pin = RD88F5182_GPIO_DBG_LED; + + if (gpio_request(pin, "DBGLED") == 0) { + if (gpio_direction_output(pin, 0) != 0) { + printk(KERN_ERR "rd88f5182_dbgled_init failed " + "to set output pin %d\n", pin); + gpio_free(pin); + return 0; + } + } else { + printk(KERN_ERR "rd88f5182_dbgled_init failed " + "to request gpio %d\n", pin); + return 0; + } + + leds_event = rd88f5182_dbgled_event; + } + return 0; +} + +__initcall(rd88f5182_dbgled_init); + +#endif + +/***************************************************************************** + * PCI + ****************************************************************************/ + +void __init rd88f5182_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; + if (gpio_request(pin, "PCI IntA") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit faield to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); + } + + pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; + if (gpio_request(pin, "PCI IntB") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit faield to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); + } +} + +static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* + * PCI-E isn't used on the RD2 + */ + if (dev->bus->number == orion_pcie_local_bus_nr()) + return IRQ_ORION_PCIE0_INT; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - RD88F5182_PCI_SLOT0_OFFS) { + case 0: + if (pin == 1) + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN); + else + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN); + default: + return -1; + } +} + +static struct hw_pci rd88f5182_pci __initdata = { + .nr_controllers = 2, + .preinit = rd88f5182_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = orion_pci_sys_setup, + .scan = orion_pci_sys_scan_bus, + .map_irq = rd88f5182_pci_map_irq, +}; + +static int __init rd88f5182_pci_init(void) +{ + if (machine_is_rd88f5182()) + pci_common_init(&rd88f5182_pci); + + return 0; +} + +subsys_initcall(rd88f5182_pci_init); + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data rd88f5182_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/***************************************************************************** + * RTC DS1338 on I2C bus + ****************************************************************************/ +static struct i2c_board_info __initdata rd88f5182_i2c_rtc = { + .driver_name = "rtc-ds1307", + .type = "ds1338", + .addr = 0x68, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static struct platform_device *rd88f5182_devices[] __initdata = { + &rd88f5182_nor_flash, +}; + +static void __init rd88f5182_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion_init(); + + /* + * Setup the CPU address decode windows for our devices + */ + orion_setup_cpu_win(ORION_DEV_BOOT, RD88F5182_NOR_BOOT_BASE, + RD88F5182_NOR_BOOT_SIZE, -1); + orion_setup_cpu_win(ORION_DEV1, RD88F5182_NOR_BASE, + RD88F5182_NOR_SIZE, -1); + + /* + * Open a special address decode windows for the PCIE WA. + */ + orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE); + orion_write(ORION_REGS_BASE | 0x20070, (0x7941 | + (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); + + /* + * Setup Multiplexing Pins -- + * MPP[0] Debug Led (GPIO - Out) + * MPP[1] Debug Led (GPIO - Out) + * MPP[2] N/A + * MPP[3] RTC_Int (GPIO - In) + * MPP[4] GPIO + * MPP[5] GPIO + * MPP[6] PCI_intA (GPIO - In) + * MPP[7] PCI_intB (GPIO - In) + * MPP[8-11] N/A + * MPP[12] SATA 0 presence Indication + * MPP[13] SATA 1 presence Indication + * MPP[14] SATA 0 active Indication + * MPP[15] SATA 1 active indication + * MPP[16-19] Not used + * MPP[20] PCI Clock to MV88F5182 + * MPP[21] PCI Clock to mini PCI CON11 + * MPP[22] USB 0 over current indication + * MPP[23] USB 1 over current indication + * MPP[24] USB 1 over current enable + * MPP[25] USB 0 over current enable + */ + + orion_write(MPP_0_7_CTRL, 0x00000003); + orion_write(MPP_8_15_CTRL, 0x55550000); + orion_write(MPP_16_19_CTRL, 0x5555); + + orion_gpio_set_valid_pins(0x000000fb); + + platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices)); + i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1); + orion_eth_init(&rd88f5182_eth_data); +} + +MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") + /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ + .phys_io = ORION_REGS_BASE, + .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = rd88f5182_init, + .map_io = orion_map_io, + .init_irq = orion_init_irq, + .timer = &orion_timer, +MACHINE_END diff --git a/arch/arm/mach-orion/time.c b/arch/arm/mach-orion/time.c new file mode 100644 index 000000000000..bd4262da4f40 --- /dev/null +++ b/arch/arm/mach-orion/time.c @@ -0,0 +1,181 @@ +/* + * arch/arm/mach-orion/time.c + * + * Core time functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <asm/mach/time.h> +#include <asm/arch/orion.h> +#include "common.h" + +/* + * Timer0: clock_event_device, Tick. + * Timer1: clocksource, Free running. + * WatchDog: Not used. + * + * Timers are counting down. + */ +#define CLOCKEVENT 0 +#define CLOCKSOURCE 1 + +/* + * Timers bits + */ +#define BRIDGE_INT_TIMER(x) (1 << ((x) + 1)) +#define TIMER_EN(x) (1 << ((x) * 2)) +#define TIMER_RELOAD_EN(x) (1 << (((x) * 2) + 1)) +#define BRIDGE_INT_TIMER_WD (1 << 3) +#define TIMER_WD_EN (1 << 4) +#define TIMER_WD_RELOAD_EN (1 << 5) + +static cycle_t orion_clksrc_read(void) +{ + return (0xffffffff - orion_read(TIMER_VAL(CLOCKSOURCE))); +} + +static struct clocksource orion_clksrc = { + .name = "orion_clocksource", + .shift = 20, + .rating = 300, + .read = orion_clksrc_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int +orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) +{ + unsigned long flags; + + if (delta == 0) + return -ETIME; + + local_irq_save(flags); + + /* + * Clear and enable timer interrupt bit + */ + orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); + orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); + + /* + * Setup new timer value + */ + orion_write(TIMER_VAL(CLOCKEVENT), delta); + + /* + * Disable auto reload and kickoff the timer + */ + orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT)); + orion_setbits(TIMER_CTRL, TIMER_EN(CLOCKEVENT)); + + local_irq_restore(flags); + + return 0; +} + +static void +orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) +{ + unsigned long flags; + + local_irq_save(flags); + + if (mode == CLOCK_EVT_MODE_PERIODIC) { + /* + * Setup latch cycles in timer and enable reload interrupt. + */ + orion_write(TIMER_VAL_RELOAD(CLOCKEVENT), LATCH); + orion_write(TIMER_VAL(CLOCKEVENT), LATCH); + orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); + orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) | + TIMER_EN(CLOCKEVENT)); + } else { + /* + * Disable timer and interrupt + */ + orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); + orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); + orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) | + TIMER_EN(CLOCKEVENT)); + } + + local_irq_restore(flags); +} + +static struct clock_event_device orion_clkevt = { + .name = "orion_tick", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .rating = 300, + .cpumask = CPU_MASK_CPU0, + .set_next_event = orion_clkevt_next_event, + .set_mode = orion_clkevt_mode, +}; + +static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) +{ + /* + * Clear cause bit and do event + */ + orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); + orion_clkevt.event_handler(&orion_clkevt); + return IRQ_HANDLED; +} + +static struct irqaction orion_timer_irq = { + .name = "orion_tick", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = orion_timer_interrupt +}; + +static void orion_timer_init(void) +{ + /* + * Setup clocksource free running timer (no interrupt on reload) + */ + orion_write(TIMER_VAL(CLOCKSOURCE), 0xffffffff); + orion_write(TIMER_VAL_RELOAD(CLOCKSOURCE), 0xffffffff); + orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKSOURCE)); + orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKSOURCE) | + TIMER_EN(CLOCKSOURCE)); + + /* + * Register clocksource + */ + orion_clksrc.mult = + clocksource_hz2mult(CLOCK_TICK_RATE, orion_clksrc.shift); + + clocksource_register(&orion_clksrc); + + /* + * Connect and enable tick handler + */ + setup_irq(IRQ_ORION_BRIDGE, &orion_timer_irq); + + /* + * Register clockevent + */ + orion_clkevt.mult = + div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, orion_clkevt.shift); + orion_clkevt.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &orion_clkevt); + orion_clkevt.min_delta_ns = + clockevent_delta2ns(1, &orion_clkevt); + + clockevents_register_device(&orion_clkevt); +} + +struct sys_timer orion_timer = { + .init = orion_timer_init, +}; diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c new file mode 100644 index 000000000000..e3e930efd155 --- /dev/null +++ b/arch/arm/mach-orion/ts209-setup.c @@ -0,0 +1,335 @@ +/* + * QNAP TS-109/TS-209 Board Setup + * + * Maintainer: Byron Bradley <byron.bbradley@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/serial_reg.h> +#include <asm/mach-types.h> +#include <asm/gpio.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <asm/arch/orion.h> +#include <asm/arch/platform.h> +#include "common.h" + +#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000 +#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M + +/**************************************************************************** + * 8MiB NOR flash. The struct mtd_partition is not in the same order as the + * partitions on the device because we want to keep compatability with + * existing QNAP firmware. + * + * Layout as used by QNAP: + * [2] 0x00000000-0x00200000 : "Kernel" + * [3] 0x00200000-0x00600000 : "RootFS1" + * [4] 0x00600000-0x00700000 : "RootFS2" + * [6] 0x00700000-0x00760000 : "NAS Config" (read-only) + * [5] 0x00760000-0x00780000 : "U-Boot Config" + * [1] 0x00780000-0x00800000 : "U-Boot" (read-only) + ***************************************************************************/ +static struct mtd_partition qnap_ts209_partitions[] = { + { + .name = "U-Boot", + .size = 0x00080000, + .offset = 0x00780000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Kernel", + .size = 0x00200000, + .offset = 0, + }, { + .name = "RootFS1", + .size = 0x00400000, + .offset = 0x00200000, + }, { + .name = "RootFS2", + .size = 0x00100000, + .offset = 0x00600000, + }, { + .name = "U-Boot Config", + .size = 0x00020000, + .offset = 0x00760000, + }, { + .name = "NAS Config", + .size = 0x00060000, + .offset = 0x00700000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct physmap_flash_data qnap_ts209_nor_flash_data = { + .width = 1, + .parts = qnap_ts209_partitions, + .nr_parts = ARRAY_SIZE(qnap_ts209_partitions) +}; + +static struct resource qnap_ts209_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = QNAP_TS209_NOR_BOOT_BASE, + .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device qnap_ts209_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { .platform_data = &qnap_ts209_nor_flash_data, }, + .resource = &qnap_ts209_nor_flash_resource, + .num_resources = 1, +}; + +/***************************************************************************** + * PCI + ****************************************************************************/ + +#define QNAP_TS209_PCI_SLOT0_OFFS 7 +#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6 +#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7 + +void __init qnap_ts209_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN; + if (gpio_request(pin, "PCI Int1") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "qnap_ts209_pci_preinit failed to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " + "%d\n", pin); + } + + pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN; + if (gpio_request(pin, "PCI Int2") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "qnap_ts209_pci_preinit failed " + "to set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " + "%d\n", pin); + } +} + +static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* + * PCIE IRQ is connected internally (not GPIO) + */ + if (dev->bus->number == orion_pcie_local_bus_nr()) + return IRQ_ORION_PCIE0_INT; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) { + case 0: + return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN); + case 1: + return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN); + default: + return -1; + } +} + +static struct hw_pci qnap_ts209_pci __initdata = { + .nr_controllers = 2, + .preinit = qnap_ts209_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = orion_pci_sys_setup, + .scan = orion_pci_sys_scan_bus, + .map_irq = qnap_ts209_pci_map_irq, +}; + +static int __init qnap_ts209_pci_init(void) +{ + if (machine_is_ts_x09()) + pci_common_init(&qnap_ts209_pci); + + return 0; +} + +subsys_initcall(qnap_ts209_pci_init); + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data qnap_ts209_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/***************************************************************************** + * RTC S35390A on I2C bus + ****************************************************************************/ +static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = { + .driver_name = "rtc-s35390a", + .addr = 0x30, +}; + +/**************************************************************************** + * GPIO Attached Keys + * Power button is attached to the PIC microcontroller + ****************************************************************************/ + +#define QNAP_TS209_GPIO_KEY_MEDIA 1 +#define QNAP_TS209_GPIO_KEY_RESET 2 + +static struct gpio_keys_button qnap_ts209_buttons[] = { + { + .code = KEY_RESTART, + .gpio = QNAP_TS209_GPIO_KEY_MEDIA, + .desc = "USB Copy Button", + .active_low = 1, + }, + { + .code = KEY_POWER, + .gpio = QNAP_TS209_GPIO_KEY_RESET, + .desc = "Reset Button", + .active_low = 1, + } +}; + +static struct gpio_keys_platform_data qnap_ts209_button_data = { + .buttons = qnap_ts209_buttons, + .nbuttons = ARRAY_SIZE(qnap_ts209_buttons), +}; + +static struct platform_device qnap_ts209_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { .platform_data = &qnap_ts209_button_data, }, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static struct platform_device *qnap_ts209_devices[] __initdata = { + &qnap_ts209_nor_flash, + &qnap_ts209_button_device, +}; + +/* + * QNAP TS-[12]09 specific power off method via UART1-attached PIC + */ + +#define UART1_REG(x) (UART1_BASE + ((UART_##x) << 2)) + +static void qnap_ts209_power_off(void) +{ + /* 19200 baud divisor */ + const unsigned divisor = ((ORION_TCLK + (8 * 19200)) / (16 * 19200)); + + pr_info("%s: triggering power-off...\n", __func__); + + /* hijack uart1 and reset into sane state (19200,8n1) */ + orion_write(UART1_REG(LCR), 0x83); + orion_write(UART1_REG(DLL), divisor & 0xff); + orion_write(UART1_REG(DLM), (divisor >> 8) & 0xff); + orion_write(UART1_REG(LCR), 0x03); + orion_write(UART1_REG(IER), 0x00); + orion_write(UART1_REG(FCR), 0x00); + orion_write(UART1_REG(MCR), 0x00); + + /* send the power-off command 'A' to PIC */ + orion_write(UART1_REG(TX), 'A'); +} + +static void __init qnap_ts209_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion_init(); + + /* + * Setup flash mapping + */ + orion_setup_cpu_win(ORION_DEV_BOOT, QNAP_TS209_NOR_BOOT_BASE, + QNAP_TS209_NOR_BOOT_SIZE, -1); + + /* + * Open a special address decode windows for the PCIE WA. + */ + orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE); + orion_write(ORION_REGS_BASE | 0x20070, (0x7941 | + (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); + + /* + * Setup Multiplexing Pins -- + * MPP[0] Reserved + * MPP[1] USB copy button (0 active) + * MPP[2] Load defaults button (0 active) + * MPP[3] GPIO RTC + * MPP[4-5] Reserved + * MPP[6] PCI Int A + * MPP[7] PCI Int B + * MPP[8-11] Reserved + * MPP[12] SATA 0 presence + * MPP[13] SATA 1 presence + * MPP[14] SATA 0 active + * MPP[15] SATA 1 active + * MPP[16] UART1 RXD + * MPP[17] UART1 TXD + * MPP[18] SW_RST (0 active) + * MPP[19] Reserved + * MPP[20] PCI clock 0 + * MPP[21] PCI clock 1 + * MPP[22] USB 0 over current + * MPP[23-25] Reserved + */ + orion_write(MPP_0_7_CTRL, 0x3); + orion_write(MPP_8_15_CTRL, 0x55550000); + orion_write(MPP_16_19_CTRL, 0x5500); + orion_gpio_set_valid_pins(0x3cc0fff); + + /* register ts209 specific power-off method */ + pm_power_off = qnap_ts209_power_off; + + platform_add_devices(qnap_ts209_devices, + ARRAY_SIZE(qnap_ts209_devices)); + i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); + orion_eth_init(&qnap_ts209_eth_data); +} + +MACHINE_START(TS209, "QNAP TS-109/TS-209") + /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ + .phys_io = ORION_REGS_BASE, + .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = qnap_ts209_init, + .map_io = orion_map_io, + .init_irq = orion_init_irq, + .timer = &orion_timer, +MACHINE_END diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c index 67e05f005a6b..6d4ca8fc0cb4 100644 --- a/arch/arm/mach-pnx4008/time.c +++ b/arch/arm/mach-pnx4008/time.c @@ -51,8 +51,6 @@ static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id) { if (__raw_readl(HSTIM_INT) & MATCH0_INT) { - write_seqlock(&xtime_lock); - do { timer_tick(); @@ -73,8 +71,6 @@ static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id) } while ((signed) (__raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER)) < 0); - - write_sequnlock(&xtime_lock); } return IRQ_HANDLED; diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 656d49661a29..0908bea0f609 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -51,6 +51,50 @@ config PXA_SHARPSL SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. +config ARCH_PXA_ESERIES + bool "PXA based Toshiba e-series PDAs" + select PXA25x + +config MACH_E330 + bool "Toshiba e330" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e330 family PDA. + +config MACH_E740 + bool "Toshiba e740" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e740 family PDA. + +config MACH_E750 + bool "Toshiba e750" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e750 family PDA. + +config MACH_E400 + bool "Toshiba e400" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e400 family PDA. + +config MACH_E800 + bool "Toshiba e800" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e800 family PDA. + config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" select PXA27x @@ -59,15 +103,44 @@ config MACH_EM_X270 bool "CompuLab EM-x270 platform" select PXA27x +config MACH_COLIBRI + bool "Toradex Colibri PX27x" + select PXA27x + config MACH_ZYLONITE bool "PXA3xx Development Platform" select PXA3xx +config MACH_LITTLETON + bool "PXA3xx Form Factor Platform (aka Littleton)" + select PXA3xx + select PXA_SSP + config MACH_ARMCORE bool "CompuLab CM-X270 modules" select PXA27x select IWMMXT +config MACH_MAGICIAN + bool "Enable HTC Magician Support" + depends on ARCH_PXA + select PXA27x + select IWMMXT + +config MACH_PCM027 + bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" + select PXA27x + select IWMMXT + +endchoice + +choice + prompt "Used baseboard" + depends on MACH_PCM027 + +config MACH_PCM990_BASEBOARD + bool "PHYTEC PCM-990 development board" + endchoice if PXA_SHARPSL diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 4263527e5123..b5c916c0747d 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -3,7 +3,7 @@ # # Common support (must be linked before board specific support) -obj-y += clock.o generic.o irq.o dma.o time.o +obj-y += clock.o devices.o generic.o irq.o dma.o time.o obj-$(CONFIG_PXA25x) += pxa25x.o obj-$(CONFIG_PXA27x) += pxa27x.o obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o @@ -16,18 +16,24 @@ obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o +obj-$(CONFIG_MACH_COLIBRI) += colibri.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o +obj-$(CONFIG_MACH_PCM027) += pcm027.o +obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_EM_X270) += em-x270.o +obj-$(CONFIG_MACH_MAGICIAN) += magician.o +obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o ifeq ($(CONFIG_MACH_ZYLONITE),y) obj-y += zylonite.o obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o endif +obj-$(CONFIG_MACH_LITTLETON) += littleton.o obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o @@ -41,13 +47,10 @@ led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o obj-$(CONFIG_LEDS) += $(led-y) # Misc features -obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM) += pm.o sleep.o standby.o +obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o obj-$(CONFIG_PXA_SSP) += ssp.o -ifeq ($(CONFIG_PXA27x),y) -obj-$(CONFIG_PM) += standby.o -endif - ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o endif diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index a16349272f54..28cfd71c032d 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -487,18 +487,15 @@ static int cmx270_mci_init(struct device *dev, /* card detect IRQ on GPIO 83 */ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ)); - set_irq_type(CMX270_MMC_IRQ, IRQT_FALLING); err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "MMC card detect", data); - if (err) { + if (err) printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't" " request MMC card detect IRQ\n"); - return -1; - } - return 0; + return err; } static void cmx270_mci_setpower(struct device *dev, unsigned int vdd) diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c new file mode 100644 index 000000000000..6db54e31c397 --- /dev/null +++ b/arch/arm/mach-pxa/colibri.c @@ -0,0 +1,134 @@ +/* + * linux/arch/arm/mach-pxa/colibri.c + * + * Support for Toradex PXA27x based Colibri module + * Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/bitops.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/sizes.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/flash.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/colibri.h> + +#include "generic.h" +#include "devices.h" + +/* + * Flash + */ +static struct mtd_partition colibri_partitions[] = { + { + .name = "Bootloader", + .offset = 0x00000000, + .size = 0x00040000, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, { + .name = "Kernel", + .offset = 0x00040000, + .size = 0x00400000, + .mask_flags = 0 + }, { + .name = "Rootfs", + .offset = 0x00440000, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct physmap_flash_data colibri_flash_data[] = { + { + .width = 4, /* bankwidth in bytes */ + .parts = colibri_partitions, + .nr_parts = ARRAY_SIZE(colibri_partitions) + } +}; + +static struct resource flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = colibri_flash_data, + }, + .resource = &flash_resource, + .num_resources = 1, +}; + +/* + * DM9000 Ethernet + */ +static struct resource dm9000_resources[] = { + [0] = { + .start = COLIBRI_ETH_PHYS, + .end = COLIBRI_ETH_PHYS + 3, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = COLIBRI_ETH_PHYS + 4, + .end = COLIBRI_ETH_PHYS + 4 + 500, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = COLIBRI_ETH_IRQ, + .end = COLIBRI_ETH_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, +}; + +static struct platform_device *colibri_devices[] __initdata = { + &flash_device, + &dm9000_device, +}; + +static void __init colibri_init(void) +{ + /* DM9000 LAN */ + pxa_gpio_mode(GPIO78_nCS_2_MD); + pxa_gpio_mode(GPIO_DM9000 | GPIO_IN); + set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING); + + platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices)); +} + +MACHINE_START(COLIBRI, "Toradex Colibri PXA27x") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = COLIBRI_SDRAM_BASE + 0x100, + .init_machine = colibri_init, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, +MACHINE_END diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 2363cc64fe07..9292576b83b3 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -21,6 +21,7 @@ #include <linux/mmc/host.h> #include <linux/pm.h> #include <linux/backlight.h> +#include <video/w100fb.h> #include <asm/setup.h> #include <asm/memory.h> @@ -141,6 +142,136 @@ struct corgissp_machinfo corgi_ssp_machinfo = { /* + * LCD/Framebuffer + */ +static void w100_lcdtg_suspend(struct w100fb_par *par) +{ + corgi_lcdtg_suspend(); +} + +static void w100_lcdtg_init(struct w100fb_par *par) +{ + corgi_lcdtg_hw_init(par->xres); +} + + +static struct w100_tg_info corgi_lcdtg_info = { + .change = w100_lcdtg_init, + .suspend = w100_lcdtg_suspend, + .resume = w100_lcdtg_init, +}; + +static struct w100_mem_info corgi_fb_mem = { + .ext_cntl = 0x00040003, + .sdram_mode_reg = 0x00650021, + .ext_timing_cntl = 0x10002a4a, + .io_cntl = 0x7ff87012, + .size = 0x1fffff, +}; + +static struct w100_gen_regs corgi_fb_regs = { + .lcd_format = 0x00000003, + .lcdd_cntl1 = 0x01CC0000, + .lcdd_cntl2 = 0x0003FFFF, + .genlcd_cntl1 = 0x00FFFF0D, + .genlcd_cntl2 = 0x003F3003, + .genlcd_cntl3 = 0x000102aa, +}; + +static struct w100_gpio_regs corgi_fb_gpio = { + .init_data1 = 0x000000bf, + .init_data2 = 0x00000000, + .gpio_dir1 = 0x00000000, + .gpio_oe1 = 0x03c0feff, + .gpio_dir2 = 0x00000000, + .gpio_oe2 = 0x00000000, +}; + +static struct w100_mode corgi_fb_modes[] = { +{ + .xres = 480, + .yres = 640, + .left_margin = 0x56, + .right_margin = 0x55, + .upper_margin = 0x03, + .lower_margin = 0x00, + .crtc_ss = 0x82360056, + .crtc_ls = 0xA0280000, + .crtc_gs = 0x80280028, + .crtc_vpos_gs = 0x02830002, + .crtc_rev = 0x00400008, + .crtc_dclk = 0xA0000000, + .crtc_gclk = 0x8015010F, + .crtc_goe = 0x80100110, + .crtc_ps1_active = 0x41060010, + .pll_freq = 75, + .fast_pll_freq = 100, + .sysclk_src = CLK_SRC_PLL, + .sysclk_divider = 0, + .pixclk_src = CLK_SRC_PLL, + .pixclk_divider = 2, + .pixclk_divider_rotated = 6, +},{ + .xres = 240, + .yres = 320, + .left_margin = 0x27, + .right_margin = 0x2e, + .upper_margin = 0x01, + .lower_margin = 0x00, + .crtc_ss = 0x81170027, + .crtc_ls = 0xA0140000, + .crtc_gs = 0xC0140014, + .crtc_vpos_gs = 0x00010141, + .crtc_rev = 0x00400008, + .crtc_dclk = 0xA0000000, + .crtc_gclk = 0x8015010F, + .crtc_goe = 0x80100110, + .crtc_ps1_active = 0x41060010, + .pll_freq = 0, + .fast_pll_freq = 0, + .sysclk_src = CLK_SRC_XTAL, + .sysclk_divider = 0, + .pixclk_src = CLK_SRC_XTAL, + .pixclk_divider = 1, + .pixclk_divider_rotated = 1, +}, + +}; + +static struct w100fb_mach_info corgi_fb_info = { + .tg = &corgi_lcdtg_info, + .init_mode = INIT_MODE_ROTATED, + .mem = &corgi_fb_mem, + .regs = &corgi_fb_regs, + .modelist = &corgi_fb_modes[0], + .num_modes = 2, + .gpio = &corgi_fb_gpio, + .xtal_freq = 12500000, + .xtal_dbl = 0, +}; + +static struct resource corgi_fb_resources[] = { + [0] = { + .start = 0x08000000, + .end = 0x08ffffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device corgifb_device = { + .name = "w100fb", + .id = -1, + .num_resources = ARRAY_SIZE(corgi_fb_resources), + .resource = corgi_fb_resources, + .dev = { + .platform_data = &corgi_fb_info, + .parent = &corgissp_device.dev, + }, + +}; + + +/* * Corgi Backlight Device */ static void corgi_bl_kick_battery(void) @@ -154,6 +285,21 @@ static void corgi_bl_kick_battery(void) } } +static void corgi_bl_set_intensity(int intensity) +{ + if (intensity > 0x10) + intensity += 0x10; + + /* Bits 0-4 are accessed via the SSP interface */ + corgi_ssp_blduty_set(intensity & 0x1f); + + /* Bit 5 is via SCOOP */ + if (intensity & 0x0020) + set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); + else + reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); +} + static struct generic_bl_info corgi_bl_machinfo = { .name = "corgi-bl", .max_intensity = 0x2f, @@ -190,9 +336,40 @@ static struct platform_device corgiled_device = { .id = -1, }; + /* * Corgi Touch Screen Device */ +static unsigned long (*get_hsync_invperiod)(struct device *dev); + +static void inline sharpsl_wait_sync(int gpio) +{ + while((GPLR(gpio) & GPIO_bit(gpio)) == 0); + while((GPLR(gpio) & GPIO_bit(gpio)) != 0); +} + +static unsigned long corgi_get_hsync_invperiod(void) +{ + if (!get_hsync_invperiod) + get_hsync_invperiod = symbol_get(w100fb_get_hsynclen); + if (!get_hsync_invperiod) + return 0; + + return get_hsync_invperiod(&corgifb_device.dev); +} + +static void corgi_put_hsync(void) +{ + if (get_hsync_invperiod) + symbol_put(w100fb_get_hsynclen); + get_hsync_invperiod = NULL; +} + +static void corgi_wait_hsync(void) +{ + sharpsl_wait_sync(CORGI_GPIO_HSYNC); +} + static struct resource corgits_resources[] = { [0] = { .start = CORGI_IRQ_GPIO_TP_INT, @@ -202,9 +379,9 @@ static struct resource corgits_resources[] = { }; static struct corgits_machinfo corgi_ts_machinfo = { - .get_hsync_len = corgi_get_hsync_len, - .put_hsync = corgi_put_hsync, - .wait_hsync = corgi_wait_hsync, + .get_hsync_invperiod = corgi_get_hsync_invperiod, + .put_hsync = corgi_put_hsync, + .wait_hsync = corgi_wait_hsync, }; static struct platform_device corgits_device = { @@ -242,12 +419,10 @@ static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, vo err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC card detect", data); - if (err) { + if (err) printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - return -1; - } - return 0; + return err; } static void corgi_mci_setpower(struct device *dev, unsigned int vdd) diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 365b9435f748..9328df37afd1 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -173,7 +173,7 @@ static void lcdtg_set_phadadj(int mode) static int lcd_inited; -static void lcdtg_hw_init(int mode) +void corgi_lcdtg_hw_init(int mode) { if (!lcd_inited) { int comadj; @@ -254,7 +254,7 @@ static void lcdtg_hw_init(int mode) } } -static void lcdtg_suspend(void) +void corgi_lcdtg_suspend(void) { /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ mdelay(34); @@ -288,298 +288,3 @@ static void lcdtg_suspend(void) lcd_inited = 0; } - -/* - * Corgi w100 Frame Buffer Device - */ -#ifdef CONFIG_PXA_SHARP_C7xx - -#include <video/w100fb.h> - -static void w100_lcdtg_suspend(struct w100fb_par *par) -{ - lcdtg_suspend(); -} - -static void w100_lcdtg_init(struct w100fb_par *par) -{ - lcdtg_hw_init(par->xres); -} - - -static struct w100_tg_info corgi_lcdtg_info = { - .change = w100_lcdtg_init, - .suspend = w100_lcdtg_suspend, - .resume = w100_lcdtg_init, -}; - -static struct w100_mem_info corgi_fb_mem = { - .ext_cntl = 0x00040003, - .sdram_mode_reg = 0x00650021, - .ext_timing_cntl = 0x10002a4a, - .io_cntl = 0x7ff87012, - .size = 0x1fffff, -}; - -static struct w100_gen_regs corgi_fb_regs = { - .lcd_format = 0x00000003, - .lcdd_cntl1 = 0x01CC0000, - .lcdd_cntl2 = 0x0003FFFF, - .genlcd_cntl1 = 0x00FFFF0D, - .genlcd_cntl2 = 0x003F3003, - .genlcd_cntl3 = 0x000102aa, -}; - -static struct w100_gpio_regs corgi_fb_gpio = { - .init_data1 = 0x000000bf, - .init_data2 = 0x00000000, - .gpio_dir1 = 0x00000000, - .gpio_oe1 = 0x03c0feff, - .gpio_dir2 = 0x00000000, - .gpio_oe2 = 0x00000000, -}; - -static struct w100_mode corgi_fb_modes[] = { -{ - .xres = 480, - .yres = 640, - .left_margin = 0x56, - .right_margin = 0x55, - .upper_margin = 0x03, - .lower_margin = 0x00, - .crtc_ss = 0x82360056, - .crtc_ls = 0xA0280000, - .crtc_gs = 0x80280028, - .crtc_vpos_gs = 0x02830002, - .crtc_rev = 0x00400008, - .crtc_dclk = 0xA0000000, - .crtc_gclk = 0x8015010F, - .crtc_goe = 0x80100110, - .crtc_ps1_active = 0x41060010, - .pll_freq = 75, - .fast_pll_freq = 100, - .sysclk_src = CLK_SRC_PLL, - .sysclk_divider = 0, - .pixclk_src = CLK_SRC_PLL, - .pixclk_divider = 2, - .pixclk_divider_rotated = 6, -},{ - .xres = 240, - .yres = 320, - .left_margin = 0x27, - .right_margin = 0x2e, - .upper_margin = 0x01, - .lower_margin = 0x00, - .crtc_ss = 0x81170027, - .crtc_ls = 0xA0140000, - .crtc_gs = 0xC0140014, - .crtc_vpos_gs = 0x00010141, - .crtc_rev = 0x00400008, - .crtc_dclk = 0xA0000000, - .crtc_gclk = 0x8015010F, - .crtc_goe = 0x80100110, - .crtc_ps1_active = 0x41060010, - .pll_freq = 0, - .fast_pll_freq = 0, - .sysclk_src = CLK_SRC_XTAL, - .sysclk_divider = 0, - .pixclk_src = CLK_SRC_XTAL, - .pixclk_divider = 1, - .pixclk_divider_rotated = 1, -}, - -}; - -static struct w100fb_mach_info corgi_fb_info = { - .tg = &corgi_lcdtg_info, - .init_mode = INIT_MODE_ROTATED, - .mem = &corgi_fb_mem, - .regs = &corgi_fb_regs, - .modelist = &corgi_fb_modes[0], - .num_modes = 2, - .gpio = &corgi_fb_gpio, - .xtal_freq = 12500000, - .xtal_dbl = 0, -}; - -static struct resource corgi_fb_resources[] = { - [0] = { - .start = 0x08000000, - .end = 0x08ffffff, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device corgifb_device = { - .name = "w100fb", - .id = -1, - .num_resources = ARRAY_SIZE(corgi_fb_resources), - .resource = corgi_fb_resources, - .dev = { - .platform_data = &corgi_fb_info, - .parent = &corgissp_device.dev, - }, - -}; -#endif - - -/* - * Spitz PXA Frame Buffer Device - */ -#ifdef CONFIG_PXA_SHARP_Cxx00 - -#include <asm/arch/pxafb.h> - -void spitz_lcd_power(int on, struct fb_var_screeninfo *var) -{ - if (on) - lcdtg_hw_init(var->xres); - else - lcdtg_suspend(); -} - -#endif - - -/* - * Corgi/Spitz Touchscreen to LCD interface - */ -static unsigned long (*get_hsync_time)(struct device *dev); - -static void inline sharpsl_wait_sync(int gpio) -{ - while((GPLR(gpio) & GPIO_bit(gpio)) == 0); - while((GPLR(gpio) & GPIO_bit(gpio)) != 0); -} - -#ifdef CONFIG_PXA_SHARP_C7xx -unsigned long corgi_get_hsync_len(void) -{ - if (!get_hsync_time) - get_hsync_time = symbol_get(w100fb_get_hsynclen); - if (!get_hsync_time) - return 0; - - return get_hsync_time(&corgifb_device.dev); -} - -void corgi_put_hsync(void) -{ - if (get_hsync_time) - symbol_put(w100fb_get_hsynclen); - get_hsync_time = NULL; -} - -void corgi_wait_hsync(void) -{ - sharpsl_wait_sync(CORGI_GPIO_HSYNC); -} -#endif - -#ifdef CONFIG_PXA_SHARP_Cxx00 -static struct device *spitz_pxafb_dev; - -static int is_pxafb_device(struct device * dev, void * data) -{ - struct platform_device *pdev = container_of(dev, struct platform_device, dev); - - return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0); -} - -unsigned long spitz_get_hsync_len(void) -{ -#ifdef CONFIG_FB_PXA - if (!spitz_pxafb_dev) { - spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); - if (!spitz_pxafb_dev) - return 0; - } - if (!get_hsync_time) - get_hsync_time = symbol_get(pxafb_get_hsync_time); - if (!get_hsync_time) -#endif - return 0; - - return pxafb_get_hsync_time(spitz_pxafb_dev); -} - -void spitz_put_hsync(void) -{ - put_device(spitz_pxafb_dev); - if (get_hsync_time) - symbol_put(pxafb_get_hsync_time); - spitz_pxafb_dev = NULL; - get_hsync_time = NULL; -} - -void spitz_wait_hsync(void) -{ - sharpsl_wait_sync(SPITZ_GPIO_HSYNC); -} -#endif - -/* - * Corgi/Spitz Backlight Power - */ -#ifdef CONFIG_PXA_SHARP_C7xx -void corgi_bl_set_intensity(int intensity) -{ - if (intensity > 0x10) - intensity += 0x10; - - /* Bits 0-4 are accessed via the SSP interface */ - corgi_ssp_blduty_set(intensity & 0x1f); - - /* Bit 5 is via SCOOP */ - if (intensity & 0x0020) - set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); - else - reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); -} -#endif - - -#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) -void spitz_bl_set_intensity(int intensity) -{ - if (intensity > 0x10) - intensity += 0x10; - - /* Bits 0-4 are accessed via the SSP interface */ - corgi_ssp_blduty_set(intensity & 0x1f); - - /* Bit 5 is via SCOOP */ - if (intensity & 0x0020) - reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); - else - set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); - - if (intensity) - set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); - else - reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); -} -#endif - -#ifdef CONFIG_MACH_AKITA -void akita_bl_set_intensity(int intensity) -{ - if (intensity > 0x10) - intensity += 0x10; - - /* Bits 0-4 are accessed via the SSP interface */ - corgi_ssp_blduty_set(intensity & 0x1f); - - /* Bit 5 is via IO-Expander */ - if (intensity & 0x0020) - akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); - else - akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); - - if (intensity) - akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); - else - akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); -} -#endif diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 40dea3d5142b..efba65edcd51 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -21,6 +21,7 @@ #include <asm/arch/ssp.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/regs-ssp.h> #include "sharpsl.h" static DEFINE_SPINLOCK(corgi_ssp_lock); diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c new file mode 100644 index 000000000000..cbc583beedc8 --- /dev/null +++ b/arch/arm/mach-pxa/cpu-pxa.c @@ -0,0 +1,294 @@ +/* + * linux/arch/arm/mach-pxa/cpu-pxa.c + * + * Copyright (C) 2002,2003 Intrinsyc Software + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * History: + * 31-Jul-2002 : Initial version [FB] + * 29-Jan-2003 : added PXA255 support [FB] + * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.) + * + * Note: + * This driver may change the memory bus clock rate, but will not do any + * platform specific access timing changes... for example if you have flash + * memory connected to CS0, you will need to register a platform specific + * notifier which will adjust the memory access strobes to maintain a + * minimum strobe width. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/cpufreq.h> + +#include <asm/hardware.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> + +#ifdef DEBUG +static unsigned int freq_debug; +MODULE_PARM(freq_debug, "i"); +MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0"); +#else +#define freq_debug 0 +#endif + +typedef struct { + unsigned int khz; + unsigned int membus; + unsigned int cccr; + unsigned int div2; +} pxa_freqs_t; + +/* Define the refresh period in mSec for the SDRAM and the number of rows */ +#define SDRAM_TREF 64 /* standard 64ms SDRAM */ +#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */ +#define MDREFR_DRI(x) (((x) * SDRAM_TREF) / (SDRAM_ROWS * 32)) + +#define CCLKCFG_TURBO 0x1 +#define CCLKCFG_FCS 0x2 +#define PXA25x_MIN_FREQ 99500 +#define PXA25x_MAX_FREQ 398100 +#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2) +#define MDREFR_DRI_MASK 0xFFF + + +/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */ +static pxa_freqs_t pxa255_run_freqs[] = +{ + /* CPU MEMBUS CCCR DIV2*/ + { 99500, 99500, 0x121, 1}, /* run= 99, turbo= 99, PXbus=50, SDRAM=50 */ + {132700, 132700, 0x123, 1}, /* run=133, turbo=133, PXbus=66, SDRAM=66 */ + {199100, 99500, 0x141, 0}, /* run=199, turbo=199, PXbus=99, SDRAM=99 */ + {265400, 132700, 0x143, 1}, /* run=265, turbo=265, PXbus=133, SDRAM=66 */ + {331800, 165900, 0x145, 1}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */ + {398100, 99500, 0x161, 0}, /* run=398, turbo=398, PXbus=196, SDRAM=99 */ + {0,} +}; +#define NUM_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs) + +static struct cpufreq_frequency_table pxa255_run_freq_table[NUM_RUN_FREQS+1]; + +/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */ +static pxa_freqs_t pxa255_turbo_freqs[] = +{ + /* CPU MEMBUS CCCR DIV2*/ + { 99500, 99500, 0x121, 1}, /* run=99, turbo= 99, PXbus=50, SDRAM=50 */ + {199100, 99500, 0x221, 0}, /* run=99, turbo=199, PXbus=50, SDRAM=99 */ + {298500, 99500, 0x321, 0}, /* run=99, turbo=287, PXbus=50, SDRAM=99 */ + {298600, 99500, 0x1c1, 0}, /* run=199, turbo=287, PXbus=99, SDRAM=99 */ + {398100, 99500, 0x241, 0}, /* run=199, turbo=398, PXbus=99, SDRAM=99 */ + {0,} +}; +#define NUM_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs) + +static struct cpufreq_frequency_table pxa255_turbo_freq_table[NUM_TURBO_FREQS+1]; + +extern unsigned get_clk_frequency_khz(int info); + +/* find a valid frequency point */ +static int pxa_verify_policy(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *pxa_freqs_table; + int ret; + + if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) { + pxa_freqs_table = pxa255_run_freq_table; + } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) { + pxa_freqs_table = pxa255_turbo_freq_table; + } else { + printk("CPU PXA: Unknown policy found. " + "Using CPUFREQ_POLICY_PERFORMANCE\n"); + pxa_freqs_table = pxa255_run_freq_table; + } + + ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table); + + if (freq_debug) + pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n", + policy->min, policy->max); + + return ret; +} + +static int pxa_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_frequency_table *pxa_freqs_table; + pxa_freqs_t *pxa_freq_settings; + struct cpufreq_freqs freqs; + int idx; + unsigned long flags; + unsigned int unused, preset_mdrefr, postset_mdrefr; + void *ramstart = phys_to_virt(0xa0000000); + + /* Get the current policy */ + if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) { + pxa_freq_settings = pxa255_run_freqs; + pxa_freqs_table = pxa255_run_freq_table; + } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) { + pxa_freq_settings = pxa255_turbo_freqs; + pxa_freqs_table = pxa255_turbo_freq_table; + } else { + printk("CPU PXA: Unknown policy found. " + "Using CPUFREQ_POLICY_PERFORMANCE\n"); + pxa_freq_settings = pxa255_run_freqs; + pxa_freqs_table = pxa255_run_freq_table; + } + + /* Lookup the next frequency */ + if (cpufreq_frequency_table_target(policy, pxa_freqs_table, + target_freq, relation, &idx)) { + return -EINVAL; + } + + freqs.old = policy->cur; + freqs.new = pxa_freq_settings[idx].khz; + freqs.cpu = policy->cpu; + + if (freq_debug) + pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n", + freqs.new / 1000, (pxa_freq_settings[idx].div2) ? + (pxa_freq_settings[idx].membus / 2000) : + (pxa_freq_settings[idx].membus / 1000)); + + /* + * Tell everyone what we're about to do... + * you should add a notify client with any platform specific + * Vcc changing capability + */ + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* Calculate the next MDREFR. If we're slowing down the SDRAM clock + * we need to preset the smaller DRI before the change. If we're speeding + * up we need to set the larger DRI value after the change. + */ + preset_mdrefr = postset_mdrefr = MDREFR; + if ((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa_freq_settings[idx].membus)) { + preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) | + MDREFR_DRI(pxa_freq_settings[idx].membus); + } + postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) | + MDREFR_DRI(pxa_freq_settings[idx].membus); + + /* If we're dividing the memory clock by two for the SDRAM clock, this + * must be set prior to the change. Clearing the divide must be done + * after the change. + */ + if (pxa_freq_settings[idx].div2) { + preset_mdrefr |= MDREFR_DB2_MASK; + postset_mdrefr |= MDREFR_DB2_MASK; + } else { + postset_mdrefr &= ~MDREFR_DB2_MASK; + } + + local_irq_save(flags); + + /* Set new the CCCR */ + CCCR = pxa_freq_settings[idx].cccr; + + asm volatile(" \n\ + ldr r4, [%1] /* load MDREFR */ \n\ + b 2f \n\ + .align 5 \n\ +1: \n\ + str %4, [%1] /* preset the MDREFR */ \n\ + mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\ + str %5, [%1] /* postset the MDREFR */ \n\ + \n\ + b 3f \n\ +2: b 1b \n\ +3: nop \n\ + " + : "=&r" (unused) + : "r" (&MDREFR), "r" (CCLKCFG_TURBO|CCLKCFG_FCS), "r" (ramstart), + "r" (preset_mdrefr), "r" (postset_mdrefr) + : "r4", "r5"); + local_irq_restore(flags); + + /* + * Tell everyone what we've just done... + * you should add a notify client with any platform specific + * SDRAM refresh timer adjustments + */ + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +static int pxa_cpufreq_init(struct cpufreq_policy *policy) +{ + int i; + + /* set default policy and cpuinfo */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->policy = CPUFREQ_POLICY_PERFORMANCE; + policy->cpuinfo.max_freq = PXA25x_MAX_FREQ; + policy->cpuinfo.min_freq = PXA25x_MIN_FREQ; + policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ + policy->cur = get_clk_frequency_khz(0); /* current freq */ + policy->min = policy->max = policy->cur; + + /* Generate the run cpufreq_frequency_table struct */ + for (i = 0; i < NUM_RUN_FREQS; i++) { + pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; + pxa255_run_freq_table[i].index = i; + } + + pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; + /* Generate the turbo cpufreq_frequency_table struct */ + for (i = 0; i < NUM_TURBO_FREQS; i++) { + pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz; + pxa255_turbo_freq_table[i].index = i; + } + pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; + + printk(KERN_INFO "PXA CPU frequency change support initialized\n"); + + return 0; +} + +static struct cpufreq_driver pxa_cpufreq_driver = { + .verify = pxa_verify_policy, + .target = pxa_set_target, + .init = pxa_cpufreq_init, + .name = "PXA25x", +}; + +static int __init pxa_cpu_init(void) +{ + int ret = -ENODEV; + if (cpu_is_pxa25x()) + ret = cpufreq_register_driver(&pxa_cpufreq_driver); + return ret; +} + +static void __exit pxa_cpu_exit(void) +{ + if (cpu_is_pxa25x()) + cpufreq_unregister_driver(&pxa_cpufreq_driver); +} + + +MODULE_AUTHOR ("Intrinsyc Software Inc."); +MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture"); +MODULE_LICENSE("GPL"); +module_init(pxa_cpu_init); +module_exit(pxa_cpu_exit); diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c new file mode 100644 index 000000000000..50ff453ad370 --- /dev/null +++ b/arch/arm/mach-pxa/devices.c @@ -0,0 +1,662 @@ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/udc.h> +#include <asm/arch/pxafb.h> +#include <asm/arch/mmc.h> +#include <asm/arch/irda.h> +#include <asm/arch/i2c.h> + +#include "devices.h" + +void __init pxa_register_device(struct platform_device *dev, void *data) +{ + int ret; + + dev->dev.platform_data = data; + + ret = platform_device_register(dev); + if (ret) + dev_err(&dev->dev, "unable to register device: %d\n", ret); +} + +static struct resource pxamci_resources[] = { + [0] = { + .start = 0x41100000, + .end = 0x41100fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MMC, + .end = IRQ_MMC, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 21, + .end = 21, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = 22, + .end = 22, + .flags = IORESOURCE_DMA, + }, +}; + +static u64 pxamci_dmamask = 0xffffffffUL; + +struct platform_device pxa_device_mci = { + .name = "pxa2xx-mci", + .id = 0, + .dev = { + .dma_mask = &pxamci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pxamci_resources), + .resource = pxamci_resources, +}; + +void __init pxa_set_mci_info(struct pxamci_platform_data *info) +{ + pxa_register_device(&pxa_device_mci, info); +} + + +static struct pxa2xx_udc_mach_info pxa_udc_info; + +void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info) +{ + memcpy(&pxa_udc_info, info, sizeof *info); +} + +static struct resource pxa2xx_udc_resources[] = { + [0] = { + .start = 0x40600000, + .end = 0x4060ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USB, + .end = IRQ_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 udc_dma_mask = ~(u32)0; + +struct platform_device pxa_device_udc = { + .name = "pxa2xx-udc", + .id = -1, + .resource = pxa2xx_udc_resources, + .num_resources = ARRAY_SIZE(pxa2xx_udc_resources), + .dev = { + .platform_data = &pxa_udc_info, + .dma_mask = &udc_dma_mask, + } +}; + +static struct resource pxafb_resources[] = { + [0] = { + .start = 0x44000000, + .end = 0x4400ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_LCD, + .end = IRQ_LCD, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 fb_dma_mask = ~(u64)0; + +struct platform_device pxa_device_fb = { + .name = "pxa2xx-fb", + .id = -1, + .dev = { + .dma_mask = &fb_dma_mask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pxafb_resources), + .resource = pxafb_resources, +}; + +void __init set_pxa_fb_info(struct pxafb_mach_info *info) +{ + pxa_register_device(&pxa_device_fb, info); +} + +void __init set_pxa_fb_parent(struct device *parent_dev) +{ + pxa_device_fb.dev.parent = parent_dev; +} + +static struct resource pxa_resource_ffuart[] = { + { + .start = __PREG(FFUART), + .end = __PREG(FFUART) + 35, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_FFUART, + .end = IRQ_FFUART, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device pxa_device_ffuart= { + .name = "pxa2xx-uart", + .id = 0, + .resource = pxa_resource_ffuart, + .num_resources = ARRAY_SIZE(pxa_resource_ffuart), +}; + +static struct resource pxa_resource_btuart[] = { + { + .start = __PREG(BTUART), + .end = __PREG(BTUART) + 35, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_BTUART, + .end = IRQ_BTUART, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device pxa_device_btuart = { + .name = "pxa2xx-uart", + .id = 1, + .resource = pxa_resource_btuart, + .num_resources = ARRAY_SIZE(pxa_resource_btuart), +}; + +static struct resource pxa_resource_stuart[] = { + { + .start = __PREG(STUART), + .end = __PREG(STUART) + 35, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_STUART, + .end = IRQ_STUART, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device pxa_device_stuart = { + .name = "pxa2xx-uart", + .id = 2, + .resource = pxa_resource_stuart, + .num_resources = ARRAY_SIZE(pxa_resource_stuart), +}; + +static struct resource pxa_resource_hwuart[] = { + { + .start = __PREG(HWUART), + .end = __PREG(HWUART) + 47, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_HWUART, + .end = IRQ_HWUART, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device pxa_device_hwuart = { + .name = "pxa2xx-uart", + .id = 3, + .resource = pxa_resource_hwuart, + .num_resources = ARRAY_SIZE(pxa_resource_hwuart), +}; + +static struct resource pxai2c_resources[] = { + { + .start = 0x40301680, + .end = 0x403016a3, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_I2C, + .end = IRQ_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa_device_i2c = { + .name = "pxa2xx-i2c", + .id = 0, + .resource = pxai2c_resources, + .num_resources = ARRAY_SIZE(pxai2c_resources), +}; + +void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info) +{ + pxa_register_device(&pxa_device_i2c, info); +} + +static struct resource pxai2s_resources[] = { + { + .start = 0x40400000, + .end = 0x40400083, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_I2S, + .end = IRQ_I2S, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa_device_i2s = { + .name = "pxa2xx-i2s", + .id = -1, + .resource = pxai2s_resources, + .num_resources = ARRAY_SIZE(pxai2s_resources), +}; + +static u64 pxaficp_dmamask = ~(u32)0; + +struct platform_device pxa_device_ficp = { + .name = "pxa2xx-ir", + .id = -1, + .dev = { + .dma_mask = &pxaficp_dmamask, + .coherent_dma_mask = 0xffffffff, + }, +}; + +void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) +{ + pxa_register_device(&pxa_device_ficp, info); +} + +struct platform_device pxa_device_rtc = { + .name = "sa1100-rtc", + .id = -1, +}; + +#ifdef CONFIG_PXA25x + +static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa25x_resource_ssp[] = { + [0] = { + .start = 0x41000000, + .end = 0x4100001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SSP, + .end = IRQ_SSP, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 13, + .end = 13, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 14, + .end = 14, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa25x_device_ssp = { + .name = "pxa25x-ssp", + .id = 0, + .dev = { + .dma_mask = &pxa25x_ssp_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa25x_resource_ssp, + .num_resources = ARRAY_SIZE(pxa25x_resource_ssp), +}; + +static u64 pxa25x_nssp_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa25x_resource_nssp[] = { + [0] = { + .start = 0x41400000, + .end = 0x4140002f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_NSSP, + .end = IRQ_NSSP, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 15, + .end = 15, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 16, + .end = 16, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa25x_device_nssp = { + .name = "pxa25x-nssp", + .id = 1, + .dev = { + .dma_mask = &pxa25x_nssp_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa25x_resource_nssp, + .num_resources = ARRAY_SIZE(pxa25x_resource_nssp), +}; + +static u64 pxa25x_assp_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa25x_resource_assp[] = { + [0] = { + .start = 0x41500000, + .end = 0x4150002f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_ASSP, + .end = IRQ_ASSP, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 23, + .end = 23, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 24, + .end = 24, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa25x_device_assp = { + /* ASSP is basically equivalent to NSSP */ + .name = "pxa25x-nssp", + .id = 2, + .dev = { + .dma_mask = &pxa25x_assp_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa25x_resource_assp, + .num_resources = ARRAY_SIZE(pxa25x_resource_assp), +}; +#endif /* CONFIG_PXA25x */ + +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) + +static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa27x_resource_ohci[] = { + [0] = { + .start = 0x4C000000, + .end = 0x4C00ff6f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USBH1, + .end = IRQ_USBH1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa27x_device_ohci = { + .name = "pxa27x-ohci", + .id = -1, + .dev = { + .dma_mask = &pxa27x_ohci_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(pxa27x_resource_ohci), + .resource = pxa27x_resource_ohci, +}; + +void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) +{ + pxa_register_device(&pxa27x_device_ohci, info); +} + +static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa27x_resource_ssp1[] = { + [0] = { + .start = 0x41000000, + .end = 0x4100003f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SSP, + .end = IRQ_SSP, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 13, + .end = 13, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 14, + .end = 14, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa27x_device_ssp1 = { + .name = "pxa27x-ssp", + .id = 0, + .dev = { + .dma_mask = &pxa27x_ssp1_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa27x_resource_ssp1, + .num_resources = ARRAY_SIZE(pxa27x_resource_ssp1), +}; + +static u64 pxa27x_ssp2_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa27x_resource_ssp2[] = { + [0] = { + .start = 0x41700000, + .end = 0x4170003f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SSP2, + .end = IRQ_SSP2, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 15, + .end = 15, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 16, + .end = 16, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa27x_device_ssp2 = { + .name = "pxa27x-ssp", + .id = 1, + .dev = { + .dma_mask = &pxa27x_ssp2_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa27x_resource_ssp2, + .num_resources = ARRAY_SIZE(pxa27x_resource_ssp2), +}; + +static u64 pxa27x_ssp3_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa27x_resource_ssp3[] = { + [0] = { + .start = 0x41900000, + .end = 0x4190003f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SSP3, + .end = IRQ_SSP3, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 66, + .end = 66, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 67, + .end = 67, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa27x_device_ssp3 = { + .name = "pxa27x-ssp", + .id = 2, + .dev = { + .dma_mask = &pxa27x_ssp3_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa27x_resource_ssp3, + .num_resources = ARRAY_SIZE(pxa27x_resource_ssp3), +}; +#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ + +#ifdef CONFIG_PXA3xx +static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa3xx_resource_ssp4[] = { + [0] = { + .start = 0x41a00000, + .end = 0x41a0003f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SSP4, + .end = IRQ_SSP4, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 2, + .end = 2, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 3, + .end = 3, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa3xx_device_ssp4 = { + /* PXA3xx SSP is basically equivalent to PXA27x */ + .name = "pxa27x-ssp", + .id = 3, + .dev = { + .dma_mask = &pxa3xx_ssp4_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa3xx_resource_ssp4, + .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4), +}; + +static struct resource pxa3xx_resources_mci2[] = { + [0] = { + .start = 0x42000000, + .end = 0x42000fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MMC2, + .end = IRQ_MMC2, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 93, + .end = 93, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = 94, + .end = 94, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa3xx_device_mci2 = { + .name = "pxa2xx-mci", + .id = 1, + .dev = { + .dma_mask = &pxamci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pxa3xx_resources_mci2), + .resource = pxa3xx_resources_mci2, +}; + +void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info) +{ + pxa_register_device(&pxa3xx_device_mci2, info); +} + +static struct resource pxa3xx_resources_mci3[] = { + [0] = { + .start = 0x42500000, + .end = 0x42500fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MMC3, + .end = IRQ_MMC3, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 100, + .end = 100, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = 101, + .end = 101, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa3xx_device_mci3 = { + .name = "pxa2xx-mci", + .id = 2, + .dev = { + .dma_mask = &pxamci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pxa3xx_resources_mci3), + .resource = pxa3xx_resources_mci3, +}; + +void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info) +{ + pxa_register_device(&pxa3xx_device_mci3, info); +} + +#endif /* CONFIG_PXA3xx */ diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 94c8d5cdd60a..96c7c8909068 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -1,4 +1,6 @@ extern struct platform_device pxa_device_mci; +extern struct platform_device pxa3xx_device_mci2; +extern struct platform_device pxa3xx_device_mci3; extern struct platform_device pxa_device_udc; extern struct platform_device pxa_device_fb; extern struct platform_device pxa_device_ffuart; @@ -12,3 +14,13 @@ extern struct platform_device pxa_device_rtc; extern struct platform_device pxa27x_device_i2c_power; extern struct platform_device pxa27x_device_ohci; + +extern struct platform_device pxa25x_device_ssp; +extern struct platform_device pxa25x_device_nssp; +extern struct platform_device pxa25x_device_assp; +extern struct platform_device pxa27x_device_ssp1; +extern struct platform_device pxa27x_device_ssp2; +extern struct platform_device pxa27x_device_ssp3; +extern struct platform_device pxa3xx_device_ssp4; + +void __init pxa_register_device(struct platform_device *dev, void *data); diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c new file mode 100644 index 000000000000..ee0ae93c876a --- /dev/null +++ b/arch/arm/mach-pxa/eseries.c @@ -0,0 +1,101 @@ +/* + * Hardware definitions for the Toshiba eseries PDAs + * + * Copyright (c) 2003 Ian Molton <spyro@f2s.com> + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ + +#include <linux/init.h> + +#include <asm/setup.h> +#include <asm/mach/arch.h> +#include <asm/arch/hardware.h> +#include <asm/mach-types.h> + +#include <generic.h> + +/* Only e800 has 128MB RAM */ +static void __init eseries_fixup(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi) +{ + mi->nr_banks=1; + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + if (machine_is_e800()) + mi->bank[0].size = (128*1024*1024); + else + mi->bank[0].size = (64*1024*1024); +} + +/* e-series machine definitions */ + +#ifdef CONFIG_MACH_E330 +MACHINE_START(E330, "Toshiba e330") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_E740 +MACHINE_START(E740, "Toshiba e740") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_E750 +MACHINE_START(E750, "Toshiba e750") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_E400 +MACHINE_START(E400, "Toshiba e400") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_E800 +MACHINE_START(E800, "Toshiba e800") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .timer = &pxa_timer, +MACHINE_END +#endif + diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 1c34946ee16e..698aeec52961 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -20,7 +20,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/platform_device.h> #include <linux/ioport.h> #include <linux/pm.h> #include <linux/string.h> @@ -33,13 +32,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/gpio.h> -#include <asm/arch/udc.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/mmc.h> -#include <asm/arch/irda.h> -#include <asm/arch/i2c.h> -#include "devices.h" #include "generic.h" /* @@ -203,7 +196,7 @@ static struct map_desc standard_io_desc[] __initdata = { }, { /* Mem Ctl */ .virtual = 0xf6000000, .pfn = __phys_to_pfn(0x48000000), - .length = 0x00100000, + .length = 0x00200000, .type = MT_DEVICE }, { /* USB host */ .virtual = 0xf8000000, @@ -233,245 +226,3 @@ void __init pxa_map_io(void) iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); get_clk_frequency_khz(1); } - - -static struct resource pxamci_resources[] = { - [0] = { - .start = 0x41100000, - .end = 0x41100fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_MMC, - .end = IRQ_MMC, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 pxamci_dmamask = 0xffffffffUL; - -struct platform_device pxa_device_mci = { - .name = "pxa2xx-mci", - .id = -1, - .dev = { - .dma_mask = &pxamci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(pxamci_resources), - .resource = pxamci_resources, -}; - -void __init pxa_set_mci_info(struct pxamci_platform_data *info) -{ - pxa_device_mci.dev.platform_data = info; -} - - -static struct pxa2xx_udc_mach_info pxa_udc_info; - -void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info) -{ - memcpy(&pxa_udc_info, info, sizeof *info); -} - -static struct resource pxa2xx_udc_resources[] = { - [0] = { - .start = 0x40600000, - .end = 0x4060ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USB, - .end = IRQ_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 udc_dma_mask = ~(u32)0; - -struct platform_device pxa_device_udc = { - .name = "pxa2xx-udc", - .id = -1, - .resource = pxa2xx_udc_resources, - .num_resources = ARRAY_SIZE(pxa2xx_udc_resources), - .dev = { - .platform_data = &pxa_udc_info, - .dma_mask = &udc_dma_mask, - } -}; - -static struct resource pxafb_resources[] = { - [0] = { - .start = 0x44000000, - .end = 0x4400ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_LCD, - .end = IRQ_LCD, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 fb_dma_mask = ~(u64)0; - -struct platform_device pxa_device_fb = { - .name = "pxa2xx-fb", - .id = -1, - .dev = { - .dma_mask = &fb_dma_mask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(pxafb_resources), - .resource = pxafb_resources, -}; - -void __init set_pxa_fb_info(struct pxafb_mach_info *info) -{ - pxa_device_fb.dev.platform_data = info; -} - -void __init set_pxa_fb_parent(struct device *parent_dev) -{ - pxa_device_fb.dev.parent = parent_dev; -} - -static struct resource pxa_resource_ffuart[] = { - { - .start = __PREG(FFUART), - .end = __PREG(FFUART) + 35, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_FFUART, - .end = IRQ_FFUART, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device pxa_device_ffuart= { - .name = "pxa2xx-uart", - .id = 0, - .resource = pxa_resource_ffuart, - .num_resources = ARRAY_SIZE(pxa_resource_ffuart), -}; - -static struct resource pxa_resource_btuart[] = { - { - .start = __PREG(BTUART), - .end = __PREG(BTUART) + 35, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_BTUART, - .end = IRQ_BTUART, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device pxa_device_btuart = { - .name = "pxa2xx-uart", - .id = 1, - .resource = pxa_resource_btuart, - .num_resources = ARRAY_SIZE(pxa_resource_btuart), -}; - -static struct resource pxa_resource_stuart[] = { - { - .start = __PREG(STUART), - .end = __PREG(STUART) + 35, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_STUART, - .end = IRQ_STUART, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device pxa_device_stuart = { - .name = "pxa2xx-uart", - .id = 2, - .resource = pxa_resource_stuart, - .num_resources = ARRAY_SIZE(pxa_resource_stuart), -}; - -static struct resource pxa_resource_hwuart[] = { - { - .start = __PREG(HWUART), - .end = __PREG(HWUART) + 47, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_HWUART, - .end = IRQ_HWUART, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device pxa_device_hwuart = { - .name = "pxa2xx-uart", - .id = 3, - .resource = pxa_resource_hwuart, - .num_resources = ARRAY_SIZE(pxa_resource_hwuart), -}; - -static struct resource pxai2c_resources[] = { - { - .start = 0x40301680, - .end = 0x403016a3, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_I2C, - .end = IRQ_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device pxa_device_i2c = { - .name = "pxa2xx-i2c", - .id = 0, - .resource = pxai2c_resources, - .num_resources = ARRAY_SIZE(pxai2c_resources), -}; - -void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info) -{ - pxa_device_i2c.dev.platform_data = info; -} - -static struct resource pxai2s_resources[] = { - { - .start = 0x40400000, - .end = 0x40400083, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_I2S, - .end = IRQ_I2S, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device pxa_device_i2s = { - .name = "pxa2xx-i2s", - .id = -1, - .resource = pxai2s_resources, - .num_resources = ARRAY_SIZE(pxai2s_resources), -}; - -static u64 pxaficp_dmamask = ~(u32)0; - -struct platform_device pxa_device_ficp = { - .name = "pxa2xx-ir", - .id = -1, - .dev = { - .dma_mask = &pxaficp_dmamask, - .coherent_dma_mask = 0xffffffff, - }, -}; - -void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) -{ - pxa_device_ficp.dev.platform_data = info; -} - -struct platform_device pxa_device_rtc = { - .name = "sa1100-rtc", - .id = -1, -}; diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 465108da2851..0a9434432c55 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -54,7 +54,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = IRQ_GPIO(4), .end = IRQ_GPIO(4), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c new file mode 100644 index 000000000000..0a4b54c21314 --- /dev/null +++ b/arch/arm/mach-pxa/littleton.c @@ -0,0 +1,325 @@ +/* + * linux/arch/arm/mach-pxa/littleton.c + * + * Support for the Marvell Littleton Development Platform. + * + * Author: Jason Chagas (largely modified code) + * Created: Nov 20, 2006 + * Copyright: (C) Copyright 2006 Marvell International Ltd. + * + * 2007-11-22 modified to align with latest kernel + * eric miao <eric.miao@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/clk.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/mfp-pxa300.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pxafb.h> +#include <asm/arch/ssp.h> +#include <asm/arch/littleton.h> + +#include "generic.h" + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + +/* Littleton MFP configurations */ +static mfp_cfg_t littleton_mfp_cfg[] __initdata = { + /* LCD */ + GPIO54_LCD_LDD_0, + GPIO55_LCD_LDD_1, + GPIO56_LCD_LDD_2, + GPIO57_LCD_LDD_3, + GPIO58_LCD_LDD_4, + GPIO59_LCD_LDD_5, + GPIO60_LCD_LDD_6, + GPIO61_LCD_LDD_7, + GPIO62_LCD_LDD_8, + GPIO63_LCD_LDD_9, + GPIO64_LCD_LDD_10, + GPIO65_LCD_LDD_11, + GPIO66_LCD_LDD_12, + GPIO67_LCD_LDD_13, + GPIO68_LCD_LDD_14, + GPIO69_LCD_LDD_15, + GPIO70_LCD_LDD_16, + GPIO71_LCD_LDD_17, + GPIO72_LCD_FCLK, + GPIO73_LCD_LCLK, + GPIO74_LCD_PCLK, + GPIO75_LCD_BIAS, + + /* SSP2 */ + GPIO25_SSP2_SCLK, + GPIO17_SSP2_FRM, + GPIO27_SSP2_TXD, + + /* Debug Ethernet */ + GPIO90_GPIO, +}; + +static struct resource smc91x_resources[] = { + [0] = { + .start = (LITTLETON_ETH_PHYS + 0x300), + .end = (LITTLETON_ETH_PHYS + 0xfffff), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)), + .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES) +/* use bit 30, 31 as the indicator of command parameter number */ +#define CMD0(x) ((0x00000000) | ((x) << 9)) +#define CMD1(x, x1) ((0x40000000) | ((x) << 9) | 0x100 | (x1)) +#define CMD2(x, x1, x2) ((0x80000000) | ((x) << 18) | 0x20000 |\ + ((x1) << 9) | 0x100 | (x2)) + +static uint32_t lcd_panel_reset[] = { + CMD0(0x1), /* reset */ + CMD0(0x0), /* nop */ + CMD0(0x0), /* nop */ + CMD0(0x0), /* nop */ +}; + +static uint32_t lcd_panel_on[] = { + CMD0(0x29), /* Display ON */ + CMD2(0xB8, 0xFF, 0xF9), /* Output Control */ + CMD0(0x11), /* Sleep out */ + CMD1(0xB0, 0x16), /* Wake */ +}; + +static uint32_t lcd_panel_off[] = { + CMD0(0x28), /* Display OFF */ + CMD2(0xB8, 0x80, 0x02), /* Output Control */ + CMD0(0x10), /* Sleep in */ + CMD1(0xB0, 0x00), /* Deep stand by in */ +}; + +static uint32_t lcd_vga_pass_through[] = { + CMD1(0xB0, 0x16), + CMD1(0xBC, 0x80), + CMD1(0xE1, 0x00), + CMD1(0x36, 0x50), + CMD1(0x3B, 0x00), +}; + +static uint32_t lcd_qvga_pass_through[] = { + CMD1(0xB0, 0x16), + CMD1(0xBC, 0x81), + CMD1(0xE1, 0x00), + CMD1(0x36, 0x50), + CMD1(0x3B, 0x22), +}; + +static uint32_t lcd_vga_transfer[] = { + CMD1(0xcf, 0x02), /* Blanking period control (1) */ + CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */ + CMD1(0xd1, 0x01), /* CKV timing control on/off */ + CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */ + CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */ + CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */ + CMD1(0xd5, 0x14), /* ASW timing control (2) */ + CMD0(0x21), /* Invert for normally black display */ + CMD0(0x29), /* Display on */ +}; + +static uint32_t lcd_qvga_transfer[] = { + CMD1(0xd6, 0x02), /* Blanking period control (1) */ + CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */ + CMD1(0xd8, 0x01), /* CKV timing control on/off */ + CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */ + CMD2(0xde, 0x05, 0x0a), /* OEV timing control */ + CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */ + CMD1(0xe0, 0x0a), /* ASW timing control (2) */ + CMD0(0x21), /* Invert for normally black display */ + CMD0(0x29), /* Display on */ +}; + +static uint32_t lcd_panel_config[] = { + CMD2(0xb8, 0xff, 0xf9), /* Output control */ + CMD0(0x11), /* sleep out */ + CMD1(0xba, 0x01), /* Display mode (1) */ + CMD1(0xbb, 0x00), /* Display mode (2) */ + CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */ + CMD1(0xbf, 0x10), /* Drive system change control */ + CMD1(0xb1, 0x56), /* Booster operation setup */ + CMD1(0xb2, 0x33), /* Booster mode setup */ + CMD1(0xb3, 0x11), /* Booster frequency setup */ + CMD1(0xb4, 0x02), /* Op amp/system clock */ + CMD1(0xb5, 0x35), /* VCS voltage */ + CMD1(0xb6, 0x40), /* VCOM voltage */ + CMD1(0xb7, 0x03), /* External display signal */ + CMD1(0xbd, 0x00), /* ASW slew rate */ + CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */ + CMD1(0xc0, 0x11), /* Sleep out FR count (A) */ + CMD1(0xc1, 0x11), /* Sleep out FR count (B) */ + CMD1(0xc2, 0x11), /* Sleep out FR count (C) */ + CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */ + CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */ + CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */ + CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */ + CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */ + CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */ + CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */ + CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */ + CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */ +}; + +static void ssp_reconfig(struct ssp_dev *dev, int nparam) +{ + static int last_nparam = -1; + + /* check if it is necessary to re-config SSP */ + if (nparam == last_nparam) + return; + + ssp_disable(dev); + ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0); + + last_nparam = nparam; +} + +static void ssp_send_cmd(uint32_t *cmd, int num) +{ + static int ssp_initialized; + static struct ssp_dev ssp2; + + int i; + + if (!ssp_initialized) { + ssp_init(&ssp2, 2, SSP_NO_IRQ); + ssp_initialized = 1; + } + + clk_enable(ssp2.ssp->clk); + for (i = 0; i < num; i++, cmd++) { + ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3); + ssp_write_word(&ssp2, *cmd & 0x3fffffff); + + /* FIXME: ssp_flush() is mandatory here to work */ + ssp_flush(&ssp2); + } + clk_disable(ssp2.ssp->clk); +} + +static void littleton_lcd_power(int on, struct fb_var_screeninfo *var) +{ + if (on) { + ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on)); + ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset)); + if (var->xres > 240) { + /* VGA */ + ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through)); + ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config)); + ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer)); + } else { + /* QVGA */ + ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through)); + ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config)); + ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer)); + } + } else + ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off)); +} + +static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = { + [0] = { + /* VGA */ + .pixclock = 38250, + .xres = 480, + .yres = 640, + .bpp = 16, + .hsync_len = 8, + .left_margin = 8, + .right_margin = 24, + .vsync_len = 2, + .upper_margin = 2, + .lower_margin = 4, + .sync = 0, + }, + [1] = { + /* QVGA */ + .pixclock = 153000, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 8, + .left_margin = 8, + .right_margin = 88, + .vsync_len = 2, + .upper_margin = 2, + .lower_margin = 2, + .sync = 0, + }, +}; + +static struct pxafb_mach_info littleton_lcd_info = { + .modes = tpo_tdo24mtea1_modes, + .num_modes = 2, + .lccr0 = LCCR0_Act, + .lccr3 = LCCR3_HSP | LCCR3_VSP, + .pxafb_lcd_power = littleton_lcd_power, +}; + +static void littleton_init_lcd(void) +{ + set_pxa_fb_info(&littleton_lcd_info); +} +#else +static inline void littleton_init_lcd(void) {}; +#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */ + +static void __init littleton_init(void) +{ + /* initialize MFP configurations */ + pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg)); + + /* + * Note: we depend bootloader set the correct + * value to MSC register for SMC91x. + */ + platform_device_register(&smc91x_device); + + littleton_init_lcd(); +} + +MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)") + .phys_io = 0x40000000, + .boot_params = 0xa0000100, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, + .init_machine = littleton_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 78ebad063cba..afa62ffe3ad5 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -38,6 +38,7 @@ #include <asm/mach/flash.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> #include <asm/arch/lpd270.h> #include <asm/arch/audio.h> #include <asm/arch/pxafb.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 1d3112dc629e..e7ae4bb3e361 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -41,6 +41,7 @@ #include <asm/hardware/sa1111.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> #include <asm/arch/lubbock.h> #include <asm/arch/udc.h> #include <asm/arch/irda.h> @@ -136,9 +137,13 @@ static struct sys_device lubbock_irq_device = { static int __init lubbock_irq_device_init(void) { - int ret = sysdev_class_register(&lubbock_irq_sysclass); - if (ret == 0) - ret = sysdev_register(&lubbock_irq_device); + int ret = -ENODEV; + + if (machine_is_lubbock()) { + ret = sysdev_class_register(&lubbock_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&lubbock_irq_device); + } return ret; } @@ -191,7 +196,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = LUBBOCK_ETH_IRQ, .end = LUBBOCK_ETH_IRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, [2] = { .name = "smc91x-attrib", @@ -206,30 +211,13 @@ static struct resource smc91x_resources[] = { * (to J5) and poking board registers (as done below). Else it's only useful * for the temperature sensors. */ -static struct resource pxa_ssp_resources[] = { - [0] = { - .start = __PREG(SSCR0_P(1)), - .end = __PREG(SSCR0_P(1)) + 0x14, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SSP, - .end = IRQ_SSP, - .flags = IORESOURCE_IRQ, - }, -}; - static struct pxa2xx_spi_master pxa_ssp_master_info = { - .ssp_type = PXA25x_SSP, - .clock_enable = CKEN_SSP, .num_chipselect = 0, }; static struct platform_device pxa_ssp = { .name = "pxa2xx-spi", .id = 1, - .resource = pxa_ssp_resources, - .num_resources = ARRAY_SIZE(pxa_ssp_resources), .dev = { .platform_data = &pxa_ssp_master_info, }, diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c new file mode 100644 index 000000000000..d98ef7ada2f8 --- /dev/null +++ b/arch/arm/mach-pxa/magician.c @@ -0,0 +1,218 @@ +/* + * Support for HTC Magician PDA phones: + * i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110 + * and T-Mobile MDA Compact. + * + * Copyright (c) 2006-2007 Philipp Zabel + * + * Based on hx4700.c, spitz.c and others. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/physmap.h> + +#include <asm/gpio.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/arch/magician.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxafb.h> +#include <asm/arch/irda.h> +#include <asm/arch/ohci.h> + +#include "generic.h" + +/* + * IRDA + */ + +static void magician_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF); +} + +static struct pxaficp_platform_data magician_ficp_info = { + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = magician_irda_transceiver_mode, +}; + +/* + * GPIO Keys + */ + +static struct gpio_keys_button magician_button_table[] = { + {KEY_POWER, GPIO0_MAGICIAN_KEY_POWER, 0, "Power button"}, + {KEY_ESC, GPIO37_MAGICIAN_KEY_HANGUP, 0, "Hangup button"}, + {KEY_F10, GPIO38_MAGICIAN_KEY_CONTACTS, 0, "Contacts button"}, + {KEY_CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, 0, "Calendar button"}, + {KEY_CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, 0, "Camera button"}, + {KEY_UP, GPIO93_MAGICIAN_KEY_UP, 0, "Up button"}, + {KEY_DOWN, GPIO94_MAGICIAN_KEY_DOWN, 0, "Down button"}, + {KEY_LEFT, GPIO95_MAGICIAN_KEY_LEFT, 0, "Left button"}, + {KEY_RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, 0, "Right button"}, + {KEY_KPENTER, GPIO97_MAGICIAN_KEY_ENTER, 0, "Action button"}, + {KEY_RECORD, GPIO98_MAGICIAN_KEY_RECORD, 0, "Record button"}, + {KEY_VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, 0, "Volume up"}, + {KEY_VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, 0, "Volume down"}, + {KEY_PHONE, GPIO102_MAGICIAN_KEY_PHONE, 0, "Phone button"}, + {KEY_PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, 0, "Headset button"}, +}; + +static struct gpio_keys_platform_data gpio_keys_data = { + .buttons = magician_button_table, + .nbuttons = ARRAY_SIZE(magician_button_table), +}; + +static struct platform_device gpio_keys = { + .name = "gpio-keys", + .dev = { + .platform_data = &gpio_keys_data, + }, + .id = -1, +}; + +/* + * LCD - Toppoly TD028STEB1 + */ + +static struct pxafb_mode_info toppoly_modes[] = { + { + .pixclock = 96153, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 11, + .vsync_len = 3, + .left_margin = 19, + .upper_margin = 2, + .right_margin = 10, + .lower_margin = 2, + .sync = 0, + }, +}; + +static struct pxafb_mach_info toppoly_info = { + .modes = toppoly_modes, + .num_modes = 1, + .fixed_modes = 1, + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_PixRsEdg, +}; + +/* + * Backlight + */ + +static void magician_set_bl_intensity(int intensity) +{ + if (intensity) { + PWM_CTRL0 = 1; + PWM_PERVAL0 = 0xc8; + PWM_PWDUTY0 = intensity; + pxa_set_cken(CKEN_PWM0, 1); + } else { + pxa_set_cken(CKEN_PWM0, 0); + } +} + +static struct generic_bl_info backlight_info = { + .default_intensity = 0x64, + .limit_mask = 0x0b, + .max_intensity = 0xc7, + .set_bl_intensity = magician_set_bl_intensity, +}; + +static struct platform_device backlight = { + .name = "corgi-bl", + .dev = { + .platform_data = &backlight_info, + }, + .id = -1, +}; + + +/* + * USB OHCI + */ + +static int magician_ohci_init(struct device *dev) +{ + UHCHR = (UHCHR | UHCHR_SSEP2 | UHCHR_PCPL | UHCHR_CGR) & + ~(UHCHR_SSEP1 | UHCHR_SSEP3 | UHCHR_SSE); + + return 0; +} + +static struct pxaohci_platform_data magician_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .init = magician_ohci_init, + .power_budget = 0, +}; + + +/* + * StrataFlash + */ + +#define PXA_CS_SIZE 0x04000000 + +static struct resource strataflash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + PXA_CS_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct physmap_flash_data strataflash_data = { + .width = 4, +}; + +static struct platform_device strataflash = { + .name = "physmap-flash", + .id = -1, + .num_resources = 1, + .resource = &strataflash_resource, + .dev = { + .platform_data = &strataflash_data, + }, +}; + +/* + * Platform devices + */ + +static struct platform_device *devices[] __initdata = { + &gpio_keys, + &backlight, + &strataflash, +}; + +static void __init magician_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); + pxa_set_ohci_info(&magician_ohci_info); + pxa_set_ficp_info(&magician_ficp_info); + set_pxa_fb_info(&toppoly_info); +} + + +MACHINE_START(MAGICIAN, "HTC Magician") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .init_machine = magician_init, + .timer = &pxa_timer, +MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 41d8c6cea62b..345c3deeb02e 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -23,6 +23,7 @@ #include <linux/ioport.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/backlight.h> #include <asm/types.h> #include <asm/setup.h> @@ -38,6 +39,7 @@ #include <asm/mach/flash.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> #include <asm/arch/mainstone.h> #include <asm/arch/audio.h> #include <asm/arch/pxafb.h> @@ -130,9 +132,13 @@ static struct sys_device mainstone_irq_device = { static int __init mainstone_irq_device_init(void) { - int ret = sysdev_class_register(&mainstone_irq_sysclass); - if (ret == 0) - ret = sysdev_register(&mainstone_irq_device); + int ret = -ENODEV; + + if (machine_is_mainstone()) { + ret = sysdev_class_register(&mainstone_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&mainstone_irq_device); + } return ret; } @@ -150,7 +156,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = MAINSTONE_IRQ(3), .end = MAINSTONE_IRQ(3), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -263,21 +269,60 @@ static struct platform_device mst_flash_device[2] = { }, }; -static void mainstone_backlight_power(int on) +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE +static int mainstone_backlight_update_status(struct backlight_device *bl) { - if (on) { + int brightness = bl->props.brightness; + + if (bl->props.power != FB_BLANK_UNBLANK || + bl->props.fb_blank != FB_BLANK_UNBLANK) + brightness = 0; + + if (brightness != 0) { pxa_gpio_mode(GPIO16_PWM0_MD); pxa_set_cken(CKEN_PWM0, 1); - PWM_CTRL0 = 0; - PWM_PWDUTY0 = 0x3ff; - PWM_PERVAL0 = 0x3ff; - } else { - PWM_CTRL0 = 0; - PWM_PWDUTY0 = 0x0; - PWM_PERVAL0 = 0x3FF; + } + PWM_CTRL0 = 0; + PWM_PWDUTY0 = brightness; + PWM_PERVAL0 = bl->props.max_brightness; + if (brightness == 0) pxa_set_cken(CKEN_PWM0, 0); + return 0; /* pointless return value */ +} + +static int mainstone_backlight_get_brightness(struct backlight_device *bl) +{ + return PWM_PWDUTY0; +} + +static /*const*/ struct backlight_ops mainstone_backlight_ops = { + .update_status = mainstone_backlight_update_status, + .get_brightness = mainstone_backlight_get_brightness, +}; + +static void __init mainstone_backlight_register(void) +{ + struct backlight_device *bl; + + bl = backlight_device_register("mainstone-bl", &pxa_device_fb.dev, + NULL, &mainstone_backlight_ops); + if (IS_ERR(bl)) { + printk(KERN_ERR "mainstone: unable to register backlight: %ld\n", + PTR_ERR(bl)); + return; } + + /* + * broken design - register-then-setup interfaces are + * utterly broken by definition. + */ + bl->props.max_brightness = 1023; + bl->props.brightness = 1023; + backlight_update_status(bl); } +#else +#define mainstone_backlight_register() do { } while (0) +#endif static struct pxafb_mode_info toshiba_ltm04c380k_mode = { .pixclock = 50000, @@ -311,7 +356,6 @@ static struct pxafb_mach_info mainstone_pxafb_info = { .num_modes = 1, .lccr0 = LCCR0_Act, .lccr3 = LCCR3_PCP, - .pxafb_backlight_power = mainstone_backlight_power, }; static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data) @@ -335,12 +379,10 @@ static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_in err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, IRQF_DISABLED, "MMC card detect", data); - if (err) { + if (err) printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - return -1; - } - return 0; + return err; } static void mainstone_mci_setpower(struct device *dev, unsigned int vdd) @@ -473,6 +515,7 @@ static void __init mainstone_init(void) mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode; set_pxa_fb_info(&mainstone_pxafb_info); + mainstone_backlight_register(); pxa_set_mci_info(&mainstone_mci_platform_data); pxa_set_ficp_info(&mainstone_ficp_platform_data); diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c index 436f96574964..ec1b2d8f61c4 100644 --- a/arch/arm/mach-pxa/mfp.c +++ b/arch/arm/mach-pxa/mfp.c @@ -17,9 +17,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/sysdev.h> #include <asm/hardware.h> #include <asm/arch/mfp.h> +#include <asm/arch/mfp-pxa3xx.h> /* mfp_spin_lock is used to ensure that MFP register configuration * (most likely a read-modify-write operation) is atomic, and that @@ -28,43 +30,110 @@ static DEFINE_SPINLOCK(mfp_spin_lock); static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE); + +struct pxa3xx_mfp_pin { + unsigned long config; /* -1 for not configured */ + unsigned long mfpr_off; /* MFPRxx Register offset */ + unsigned long mfpr_run; /* Run-Mode Register Value */ + unsigned long mfpr_lpm; /* Low Power Mode Register Value */ +}; + static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX]; +/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */ +const static unsigned long mfpr_lpm[] = { + MFPR_LPM_INPUT, + MFPR_LPM_DRIVE_LOW, + MFPR_LPM_DRIVE_HIGH, + MFPR_LPM_PULL_LOW, + MFPR_LPM_PULL_HIGH, + MFPR_LPM_FLOAT, +}; + +/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */ +const static unsigned long mfpr_pull[] = { + MFPR_PULL_NONE, + MFPR_PULL_LOW, + MFPR_PULL_HIGH, + MFPR_PULL_BOTH, +}; + +/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */ +const static unsigned long mfpr_edge[] = { + MFPR_EDGE_NONE, + MFPR_EDGE_RISE, + MFPR_EDGE_FALL, + MFPR_EDGE_BOTH, +}; + #define mfpr_readl(off) \ __raw_readl(mfpr_mmio_base + (off)) #define mfpr_writel(off, val) \ __raw_writel(val, mfpr_mmio_base + (off)) +#define mfp_configured(p) ((p)->config != -1) + /* * perform a read-back of any MFPR register to make sure the * previous writings are finished */ #define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0) -static inline void __mfp_config(int pin, unsigned long val) +static inline void __mfp_config_run(struct pxa3xx_mfp_pin *p) { - unsigned long off = mfp_table[pin].mfpr_off; + if (mfp_configured(p)) + mfpr_writel(p->mfpr_off, p->mfpr_run); +} - mfp_table[pin].mfpr_val = val; - mfpr_writel(off, val); +static inline void __mfp_config_lpm(struct pxa3xx_mfp_pin *p) +{ + if (mfp_configured(p)) { + unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR; + if (mfpr_clr != p->mfpr_run) + mfpr_writel(p->mfpr_off, mfpr_clr); + if (p->mfpr_lpm != mfpr_clr) + mfpr_writel(p->mfpr_off, p->mfpr_lpm); + } } -void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num) +void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num) { - int i, pin; - unsigned long val, flags; - mfp_cfg_t *mfp_cfg = mfp_cfgs; + unsigned long flags; + int i; spin_lock_irqsave(&mfp_spin_lock, flags); - for (i = 0; i < num; i++, mfp_cfg++) { - pin = MFP_CFG_PIN(*mfp_cfg); - val = MFP_CFG_VAL(*mfp_cfg); + for (i = 0; i < num; i++, mfp_cfgs++) { + unsigned long tmp, c = *mfp_cfgs; + struct pxa3xx_mfp_pin *p; + int pin, af, drv, lpm, edge, pull; + pin = MFP_PIN(c); BUG_ON(pin >= MFP_PIN_MAX); - - __mfp_config(pin, val); + p = &mfp_table[pin]; + + af = MFP_AF(c); + drv = MFP_DS(c); + lpm = MFP_LPM_STATE(c); + edge = MFP_LPM_EDGE(c); + pull = MFP_PULL(c); + + /* run-mode pull settings will conflict with MFPR bits of + * low power mode state, calculate mfpr_run and mfpr_lpm + * individually if pull != MFP_PULL_NONE + */ + tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv); + + if (likely(pull == MFP_PULL_NONE)) { + p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; + p->mfpr_lpm = p->mfpr_run; + } else { + p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; + p->mfpr_run = tmp | mfpr_pull[pull]; + } + + p->config = c; __mfp_config_run(p); } mfpr_sync(); @@ -96,140 +165,82 @@ void pxa3xx_mfp_write(int mfp, unsigned long val) spin_unlock_irqrestore(&mfp_spin_lock, flags); } -void pxa3xx_mfp_set_afds(int mfp, int af, int ds) -{ - uint32_t mfpr_off, mfpr_val; - unsigned long flags; - - BUG_ON(mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); - mfpr_off = mfp_table[mfp].mfpr_off; - - mfpr_val = mfpr_readl(mfpr_off); - mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK); - mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) | - ((ds & 0x7) << MFPR_DRV_OFFSET)); - - mfpr_writel(mfpr_off, mfpr_val); - mfpr_sync(); - - spin_unlock_irqrestore(&mfp_spin_lock, flags); -} - -void pxa3xx_mfp_set_rdh(int mfp, int rdh) +void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map) { - uint32_t mfpr_off, mfpr_val; - unsigned long flags; - - BUG_ON(mfp >= MFP_PIN_MAX); + struct pxa3xx_mfp_addr_map *p; + unsigned long offset, flags; + int i; spin_lock_irqsave(&mfp_spin_lock, flags); - mfpr_off = mfp_table[mfp].mfpr_off; - - mfpr_val = mfpr_readl(mfpr_off); - mfpr_val &= ~MFPR_RDH_MASK; - - if (likely(rdh)) - mfpr_val |= (1u << MFPR_SS_OFFSET); + for (p = map; p->start != MFP_PIN_INVALID; p++) { + offset = p->offset; + i = p->start; - mfpr_writel(mfpr_off, mfpr_val); - mfpr_sync(); + do { + mfp_table[i].mfpr_off = offset; + mfp_table[i].mfpr_run = 0; + mfp_table[i].mfpr_lpm = 0; + offset += 4; i++; + } while ((i <= p->end) && (p->end != -1)); + } spin_unlock_irqrestore(&mfp_spin_lock, flags); } -void pxa3xx_mfp_set_lpm(int mfp, int lpm) +void __init pxa3xx_init_mfp(void) { - uint32_t mfpr_off, mfpr_val; - unsigned long flags; - - BUG_ON(mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); - - mfpr_off = mfp_table[mfp].mfpr_off; - mfpr_val = mfpr_readl(mfpr_off); - mfpr_val &= ~MFPR_LPM_MASK; - - if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET; - if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET; - if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET; - if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET; - if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET; - - mfpr_writel(mfpr_off, mfpr_val); - mfpr_sync(); + int i; - spin_unlock_irqrestore(&mfp_spin_lock, flags); + for (i = 0; i < ARRAY_SIZE(mfp_table); i++) + mfp_table[i].config = -1; } -void pxa3xx_mfp_set_pull(int mfp, int pull) +#ifdef CONFIG_PM +/* + * Configure the MFPs appropriately for suspend/resume. + * FIXME: this should probably depend on which system state we're + * entering - for instance, we might not want to place MFP pins in + * a pull-down mode if they're an active low chip select, and we're + * just entering standby. + */ +static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state) { - uint32_t mfpr_off, mfpr_val; - unsigned long flags; - - BUG_ON(mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); + int pin; - mfpr_off = mfp_table[mfp].mfpr_off; - mfpr_val = mfpr_readl(mfpr_off); - mfpr_val &= ~MFPR_PULL_MASK; - mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET); - - mfpr_writel(mfpr_off, mfpr_val); - mfpr_sync(); - - spin_unlock_irqrestore(&mfp_spin_lock, flags); + for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) { + struct pxa3xx_mfp_pin *p = &mfp_table[pin]; + __mfp_config_lpm(p); + } + return 0; } -void pxa3xx_mfp_set_edge(int mfp, int edge) +static int pxa3xx_mfp_resume(struct sys_device *d) { - uint32_t mfpr_off, mfpr_val; - unsigned long flags; - - BUG_ON(mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); - - mfpr_off = mfp_table[mfp].mfpr_off; - mfpr_val = mfpr_readl(mfpr_off); - - mfpr_val &= ~MFPR_EDGE_MASK; - mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET; - mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET; + int pin; - mfpr_writel(mfpr_off, mfpr_val); - mfpr_sync(); - - spin_unlock_irqrestore(&mfp_spin_lock, flags); + for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) { + struct pxa3xx_mfp_pin *p = &mfp_table[pin]; + __mfp_config_run(p); + } + return 0; } -void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map) -{ - struct pxa3xx_mfp_addr_map *p; - unsigned long offset, flags; - int i; - - spin_lock_irqsave(&mfp_spin_lock, flags); - - for (p = map; p->start != MFP_PIN_INVALID; p++) { - offset = p->offset; - i = p->start; - - do { - mfp_table[i].mfpr_off = offset; - mfp_table[i].mfpr_val = 0; - offset += 4; i++; - } while ((i <= p->end) && (p->end != -1)); - } +static struct sysdev_class mfp_sysclass = { + set_kset_name("mfp"), + .suspend = pxa3xx_mfp_suspend, + .resume = pxa3xx_mfp_resume, +}; - spin_unlock_irqrestore(&mfp_spin_lock, flags); -} +static struct sys_device mfp_device = { + .id = 0, + .cls = &mfp_sysclass, +}; -void __init pxa3xx_init_mfp(void) +static int __init mfp_init_devicefs(void) { - memset(mfp_table, 0, sizeof(mfp_table)); + sysdev_class_register(&mfp_sysclass); + return sysdev_register(&mfp_device); } +device_initcall(mfp_init_devicefs); +#endif diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c new file mode 100644 index 000000000000..540c3bba5f9a --- /dev/null +++ b/arch/arm/mach-pxa/pcm027.c @@ -0,0 +1,216 @@ +/* + * linux/arch/arm/mach-pxa/pcm027.c + * Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027). + * + * Refer + * http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html + * for additional hardware info + * + * Author: Juergen Kilb + * Created: April 05, 2005 + * Copyright: Phytec Messtechnik GmbH + * e-Mail: armlinux@phytec.de + * + * based on Intel Mainstone Board + * + * Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/arch/hardware.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx_spi.h> +#include <asm/arch/pcm027.h> +#include "generic.h" + +/* + * ABSTRACT: + * + * The PXA270 processor comes with a bunch of hardware on its silicon. + * Not all of this hardware can be used at the same time and not all + * is routed to module's connectors. Also it depends on the baseboard, what + * kind of hardware can be used in which way. + * -> So this file supports the main devices on the CPU card only! + * Refer pcm990-baseboard.c how to extend this features to get a full + * blown system with many common interfaces. + * + * The PCM-027 supports the following interfaces through its connectors and + * will be used in pcm990-baseboard.c: + * + * - LCD support + * - MMC support + * - IDE/CF card + * - FFUART + * - BTUART + * - IRUART + * - AC97 + * - SSP + * - SSP3 + * + * Claimed GPIOs: + * GPIO0 -> IRQ input from RTC + * GPIO2 -> SYS_ENA*) + * GPIO3 -> PWR_SCL + * GPIO4 -> PWR_SDA + * GPIO5 -> PowerCap0*) + * GPIO6 -> PowerCap1*) + * GPIO7 -> PowerCap2*) + * GPIO8 -> PowerCap3*) + * GPIO15 -> /CS1 + * GPIO20 -> /CS2 + * GPIO21 -> /CS3 + * GPIO33 -> /CS5 network controller select + * GPIO52 -> IRQ from network controller + * GPIO78 -> /CS2 + * GPIO80 -> /CS4 + * GPIO90 -> LED0 + * GPIO91 -> LED1 + * GPIO114 -> IRQ from CAN controller + * GPIO117 -> SCL + * GPIO118 -> SDA + * + * *) CPU internal use only + */ + +/* + * SMC91x network controller specific stuff + */ +static struct resource smc91x_resources[] = { + [0] = { + .start = PCM027_ETH_PHYS + 0x300, + .end = PCM027_ETH_PHYS + PCM027_ETH_SIZE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PCM027_ETH_IRQ, + .end = PCM027_ETH_IRQ, + /* note: smc91x's driver doesn't use the trigger bits yet */ + .flags = IORESOURCE_IRQ | PCM027_ETH_IRQ_EDGE, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct physmap_flash_data pcm027_flash_data = { + .width = 4, +}; + +static struct resource pcm027_flash_resource = { + .start = PCM027_FLASH_PHYS, + .end = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 , + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pcm027_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &pcm027_flash_data, + }, + .resource = &pcm027_flash_resource, + .num_resources = 1, +}; + +#ifdef CONFIG_LEDS_GPIO + +static struct gpio_led pcm027_led[] = { + { + .name = "led0:red", /* FIXME */ + .gpio = PCM027_LED_CPU + }, + { + .name = "led1:green", /* FIXME */ + .gpio = PCM027_LED_HEARD_BEAT + }, +}; + +static struct gpio_led_platform_data pcm027_led_data = { + .num_leds = ARRAY_SIZE(pcm027_led), + .leds = pcm027_led +}; + +static struct platform_device pcm027_led_dev = { + .name = "leds-gpio", + .id = 0, + .dev = { + .platform_data = &pcm027_led_data, + }, +}; + +#endif /* CONFIG_LEDS_GPIO */ + +/* + * declare the available device resources on this board + */ +static struct platform_device *devices[] __initdata = { + &smc91x_device, + &pcm027_flash, +#ifdef CONFIG_LEDS_GPIO + &pcm027_led_dev +#endif +}; + +/* + * pcm027_init - breath some life into the board + */ +static void __init pcm027_init(void) +{ + /* system bus arbiter setting + * - Core_Park + * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4 + */ + ARB_CNTRL = ARB_CORE_PARK | 0x234; + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + /* LEDs (on demand only) */ +#ifdef CONFIG_LEDS_GPIO + pxa_gpio_mode(PCM027_LED_CPU | GPIO_OUT); + pxa_gpio_mode(PCM027_LED_HEARD_BEAT | GPIO_OUT); +#endif /* CONFIG_LEDS_GPIO */ + + /* at last call the baseboard to initialize itself */ +#ifdef CONFIG_MACH_PCM990_BASEBOARD + pcm990_baseboard_init(); +#endif +} + +static void __init pcm027_map_io(void) +{ + pxa_map_io(); + + /* initialize sleep mode regs (wake-up sources, etc) */ + PGSR0 = 0x01308000; + PGSR1 = 0x00CF0002; + PGSR2 = 0x0E294000; + PGSR3 = 0x0000C000; + PWER = 0x40000000 | PWER_GPIO0 | PWER_GPIO1; + PRER = 0x00000000; + PFER = 0x00000003; +} + +MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270") + /* Maintainer: Pengutronix */ + .boot_params = 0xa0000100, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pcm027_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = pcm027_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c new file mode 100644 index 000000000000..3dda16a20049 --- /dev/null +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -0,0 +1,330 @@ +/* + * arch/arm/mach-pxa/pcm990-baseboard.c + * Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990). + * + * Refer + * http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html + * for additional hardware info + * + * Author: Juergen Kilb + * Created: April 05, 2005 + * Copyright: Phytec Messtechnik GmbH + * e-Mail: armlinux@phytec.de + * + * based on Intel Mainstone Board + * + * Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/ide.h> +#include <asm/mach/map.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/mmc.h> +#include <asm/arch/ohci.h> +#include <asm/arch/pcm990_baseboard.h> + +/* + * The PCM-990 development baseboard uses PCM-027's hardeware in the + * following way: + * + * - LCD support is in use + * - GPIO16 is output for back light on/off with PWM + * - GPIO58 ... GPIO73 are outputs for display data + * - GPIO74 is output output for LCDFCLK + * - GPIO75 is output for LCDLCLK + * - GPIO76 is output for LCDPCLK + * - GPIO77 is output for LCDBIAS + * - MMC support is in use + * - GPIO32 is output for MMCCLK + * - GPIO92 is MMDAT0 + * - GPIO109 is MMDAT1 + * - GPIO110 is MMCS0 + * - GPIO111 is MMCS1 + * - GPIO112 is MMCMD + * - IDE/CF card is in use + * - GPIO48 is output /POE + * - GPIO49 is output /PWE + * - GPIO50 is output /PIOR + * - GPIO51 is output /PIOW + * - GPIO54 is output /PCE2 + * - GPIO55 is output /PREG + * - GPIO56 is input /PWAIT + * - GPIO57 is output /PIOS16 + * - GPIO79 is output PSKTSEL + * - GPIO85 is output /PCE1 + * - FFUART is in use + * - GPIO34 is input FFRXD + * - GPIO35 is input FFCTS + * - GPIO36 is input FFDCD + * - GPIO37 is input FFDSR + * - GPIO38 is input FFRI + * - GPIO39 is output FFTXD + * - GPIO40 is output FFDTR + * - GPIO41 is output FFRTS + * - BTUART is in use + * - GPIO42 is input BTRXD + * - GPIO43 is output BTTXD + * - GPIO44 is input BTCTS + * - GPIO45 is output BTRTS + * - IRUART is in use + * - GPIO46 is input STDRXD + * - GPIO47 is output STDTXD + * - AC97 is in use*) + * - GPIO28 is input AC97CLK + * - GPIO29 is input AC97DatIn + * - GPIO30 is output AC97DatO + * - GPIO31 is output AC97SYNC + * - GPIO113 is output AC97_RESET + * - SSP is in use + * - GPIO23 is output SSPSCLK + * - GPIO24 is output chip select to Max7301 + * - GPIO25 is output SSPTXD + * - GPIO26 is input SSPRXD + * - GPIO27 is input for Max7301 IRQ + * - GPIO53 is input SSPSYSCLK + * - SSP3 is in use + * - GPIO81 is output SSPTXD3 + * - GPIO82 is input SSPRXD3 + * - GPIO83 is output SSPSFRM + * - GPIO84 is output SSPCLK3 + * + * Otherwise claimed GPIOs: + * GPIO1 -> IRQ from user switch + * GPIO9 -> IRQ from power management + * GPIO10 -> IRQ from WML9712 AC97 controller + * GPIO11 -> IRQ from IDE controller + * GPIO12 -> IRQ from CF controller + * GPIO13 -> IRQ from CF controller + * GPIO14 -> GPIO free + * GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path) + * GPIO19 -> GPIO free + * GPIO20 -> /SDCS2 + * GPIO21 -> /CS3 PC card socket select + * GPIO33 -> /CS5 network controller select + * GPIO78 -> /CS2 (16 bit wide data path) + * GPIO80 -> /CS4 (16 bit wide data path) + * GPIO86 -> GPIO free + * GPIO87 -> GPIO free + * GPIO90 -> LED0 on CPU module + * GPIO91 -> LED1 on CPI module + * GPIO117 -> SCL + * GPIO118 -> SDA + */ + +static unsigned long pcm990_irq_enabled; + +static void pcm990_mask_ack_irq(unsigned int irq) +{ + int pcm990_irq = (irq - PCM027_IRQ(0)); + PCM990_INTMSKENA = (pcm990_irq_enabled &= ~(1 << pcm990_irq)); +} + +static void pcm990_unmask_irq(unsigned int irq) +{ + int pcm990_irq = (irq - PCM027_IRQ(0)); + /* the irq can be acknowledged only if deasserted, so it's done here */ + PCM990_INTSETCLR |= 1 << pcm990_irq; + PCM990_INTMSKENA = (pcm990_irq_enabled |= (1 << pcm990_irq)); +} + +static struct irq_chip pcm990_irq_chip = { + .mask_ack = pcm990_mask_ack_irq, + .unmask = pcm990_unmask_irq, +}; + +static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled; + + do { + GEDR(PCM990_CTRL_INT_IRQ_GPIO) = + GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO); + if (likely(pending)) { + irq = PCM027_IRQ(0) + __ffs(pending); + desc = irq_desc + irq; + desc_handle_irq(irq, desc); + } + pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled; + } while (pending); +} + +static void __init pcm990_init_irq(void) +{ + int irq; + + /* setup extra PCM990 irqs */ + for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) { + set_irq_chip(irq, &pcm990_irq_chip); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + + PCM990_INTMSKENA = 0x00; /* disable all Interrupts */ + PCM990_INTSETCLR = 0xFF; + + set_irq_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler); + set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE); +} + +static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int, + void *data) +{ + int err; + + /* + * enable GPIO for PXA27x MMC controller + */ + pxa_gpio_mode(GPIO32_MMCCLK_MD); + pxa_gpio_mode(GPIO112_MMCCMD_MD); + pxa_gpio_mode(GPIO92_MMCDAT0_MD); + pxa_gpio_mode(GPIO109_MMCDAT1_MD); + pxa_gpio_mode(GPIO110_MMCDAT2_MD); + pxa_gpio_mode(GPIO111_MMCDAT3_MD); + + err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED, + "MMC card detect", data); + if (err) + printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC " + "card detect IRQ\n"); + + return err; +} + +static void pcm990_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + + if ((1 << vdd) & p_d->ocr_mask) + __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) = + PCM990_CTRL_MMC2PWR; + else + __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) = + ~PCM990_CTRL_MMC2PWR; +} + +static void pcm990_mci_exit(struct device *dev, void *data) +{ + free_irq(PCM027_MMCDET_IRQ, data); +} + +#define MSECS_PER_JIFFY (1000/HZ) + +static struct pxamci_platform_data pcm990_mci_platform_data = { + .detect_delay = 250 / MSECS_PER_JIFFY, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .init = pcm990_mci_init, + .setpower = pcm990_mci_setpower, + .exit = pcm990_mci_exit, +}; + +/* + * init OHCI hardware to work with + * + * Note: Only USB port 1 (host only) is connected + * + * GPIO88 (USBHPWR#1): overcurrent in, overcurrent when low + * GPIO89 (USBHPEN#1): power-on out, on when low + */ +static int pcm990_ohci_init(struct device *dev) +{ + pxa_gpio_mode(PCM990_USB_OVERCURRENT); + pxa_gpio_mode(PCM990_USB_PWR_EN); + /* + * disable USB port 2 and 3 + * power sense is active low + */ + UHCHR = ((UHCHR) | UHCHR_PCPL | UHCHR_PSPL | UHCHR_SSEP2 | + UHCHR_SSEP3) & ~(UHCHR_SSEP1 | UHCHR_SSE); + /* + * wait 10ms after Power on + * overcurrent per port + * power switch per port + */ + UHCRHDA = (5<<24) | (1<<11) | (1<<8); /* FIXME: Required? */ + + return 0; +} + +static struct pxaohci_platform_data pcm990_ohci_platform_data = { + .port_mode = PMM_PERPORT_MODE, + .init = pcm990_ohci_init, + .exit = NULL, +}; + +/* + * AC97 support + * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ + */ +static struct resource pxa27x_ac97_resources[] = { + [0] = { + .start = 0x40500000, + .end = 0x40500000 + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_AC97, + .end = IRQ_AC97, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 pxa_ac97_dmamask = 0xffffffffUL; + +static struct platform_device pxa27x_device_ac97 = { + .name = "pxa2xx-ac97", + .id = -1, + .dev = { + .dma_mask = &pxa_ac97_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pxa27x_ac97_resources), + .resource = pxa27x_ac97_resources, +}; + +/* + * enable generic access to the base board control CPLDs U6 and U7 + */ +static struct map_desc pcm990_io_desc[] __initdata = { + { + .virtual = PCM990_CTRL_BASE, + .pfn = __phys_to_pfn(PCM990_CTRL_PHYS), + .length = PCM990_CTRL_SIZE, + .type = MT_DEVICE /* CPLD */ + }, { + .virtual = PCM990_CF_PLD_BASE, + .pfn = __phys_to_pfn(PCM990_CF_PLD_PHYS), + .length = PCM990_CF_PLD_SIZE, + .type = MT_DEVICE /* CPLD */ + } +}; + +/* + * system init for baseboard usage. Will be called by pcm027 init. + * + * Add platform devices present on this baseboard and init + * them from CPU side as far as required to use them later on + */ +void __init pcm990_baseboard_init(void) +{ + /* register CPLD access */ + iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc)); + + /* register CPLD's IRQ controller */ + pcm990_init_irq(); + + platform_device_register(&pxa27x_device_ac97); + + /* MMC */ + pxa_set_mci_info(&pcm990_mci_platform_data); + + /* USB host */ + pxa_set_ohci_info(&pcm990_ohci_platform_data); + + printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n"); +} diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index a941c71c7d06..039194cbe477 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -38,34 +38,37 @@ int pxa_pm_enter(suspend_state_t state) iwmmxt_task_disable(NULL); #endif - pxa_cpu_pm_fns->save(sleep_save); + /* skip registers saving for standby */ + if (state != PM_SUSPEND_STANDBY) { + pxa_cpu_pm_fns->save(sleep_save); + /* before sleeping, calculate and save a checksum */ + for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) + sleep_save_checksum += sleep_save[i]; + } /* Clear sleep reset status */ RCSR = RCSR_SMR; - /* before sleeping, calculate and save a checksum */ - for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) - sleep_save_checksum += sleep_save[i]; - /* *** go zzz *** */ pxa_cpu_pm_fns->enter(state); cpu_init(); - /* after sleeping, validate the checksum */ - for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) - checksum += sleep_save[i]; + if (state != PM_SUSPEND_STANDBY) { + /* after sleeping, validate the checksum */ + for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) + checksum += sleep_save[i]; - /* if invalid, display message and wait for a hardware reset */ - if (checksum != sleep_save_checksum) { + /* if invalid, display message and wait for a hardware reset */ + if (checksum != sleep_save_checksum) { #ifdef CONFIG_ARCH_LUBBOCK - LUB_HEXLED = 0xbadbadc5; + LUB_HEXLED = 0xbadbadc5; #endif - while (1) - pxa_cpu_pm_fns->enter(state); + while (1) + pxa_cpu_pm_fns->enter(state); + } + pxa_cpu_pm_fns->restore(sleep_save); } - pxa_cpu_pm_fns->restore(sleep_save); - pr_debug("*** made it back from resume\n"); return 0; diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 655668d4d0e9..dd54496083cb 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -215,12 +215,10 @@ static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC card detect", data); - if (err) { + if (err) printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - return -1; - } - return 0; + return err; } static void poodle_mci_setpower(struct device *dev, unsigned int vdd) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 9732d5d9466b..ddd05bf78e02 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -111,21 +111,27 @@ static const struct clkops clk_pxa25x_lcd_ops = { * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly) */ +static struct clk pxa25x_hwuart_clk = + INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev) +; + static struct clk pxa25x_clks[] = { INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev), INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev), INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), - INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL), INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev), INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev), INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev), + + INIT_CKEN("SSPCLK", SSP, 3686400, 0, &pxa25x_device_ssp.dev), + INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev), + INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev), + /* INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), - INIT_CKEN("SSPCLK", SSP, 3686400, 0, NULL), INIT_CKEN("I2SCLK", I2S, 14745600, 0, NULL), - INIT_CKEN("NSSPCLK", NSSP, 3686400, 0, NULL), */ INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL), }; @@ -213,8 +219,6 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save) static void pxa25x_cpu_pm_enter(suspend_state_t state) { - CKEN = 0; - switch (state) { case PM_SUSPEND_MEM: /* set resume return address */ @@ -236,6 +240,8 @@ static void __init pxa25x_init_pm(void) { pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns; } +#else +static inline void pxa25x_init_pm(void) {} #endif /* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm @@ -287,30 +293,33 @@ void __init pxa25x_init_irq(void) } static struct platform_device *pxa25x_devices[] __initdata = { - &pxa_device_mci, &pxa_device_udc, - &pxa_device_fb, &pxa_device_ffuart, &pxa_device_btuart, &pxa_device_stuart, - &pxa_device_i2c, &pxa_device_i2s, - &pxa_device_ficp, &pxa_device_rtc, + &pxa25x_device_ssp, + &pxa25x_device_nssp, + &pxa25x_device_assp, }; static int __init pxa25x_init(void) { int ret = 0; + /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ + if (cpu_is_pxa25x()) + clks_register(&pxa25x_hwuart_clk, 1); + if (cpu_is_pxa21x() || cpu_is_pxa25x()) { clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks)); if ((ret = pxa_init_dma(16))) return ret; -#ifdef CONFIG_PM + pxa25x_init_pm(); -#endif + ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 57efebdc4324..96cf274ec7cb 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -21,6 +21,7 @@ #include <asm/irq.h> #include <asm/arch/irqs.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> #include <asm/arch/ohci.h> #include <asm/arch/pm.h> #include <asm/arch/dma.h> @@ -151,11 +152,12 @@ static struct clk pxa27x_clks[] = { INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev), INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL), + INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), + INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), + INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), + /* INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL), - INIT_CKEN("SSPCLK", SSP1, 13000000, 0, NULL), - INIT_CKEN("SSPCLK", SSP2, 13000000, 0, NULL), - INIT_CKEN("SSPCLK", SSP3, 13000000, 0, NULL), INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL), INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL), INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL), @@ -264,12 +266,6 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_standby(void); - if (state == PM_SUSPEND_STANDBY) - CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) | - (1 << CKEN_LCD) | (1 << CKEN_PWM0); - else - CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER); - /* ensure voltage-change sequencer not initiated, which hangs */ PCFR &= ~PCFR_FVC; @@ -305,6 +301,8 @@ static void __init pxa27x_init_pm(void) { pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns; } +#else +static inline void pxa27x_init_pm(void) {} #endif /* PXA27x: Various gpios can issue wakeup events. This logic only @@ -374,37 +372,6 @@ void __init pxa27x_init_irq(void) * device registration specific to PXA27x. */ -static u64 pxa27x_dmamask = 0xffffffffUL; - -static struct resource pxa27x_ohci_resources[] = { - [0] = { - .start = 0x4C000000, - .end = 0x4C00ff6f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USBH1, - .end = IRQ_USBH1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device pxa27x_device_ohci = { - .name = "pxa27x-ohci", - .id = -1, - .dev = { - .dma_mask = &pxa27x_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(pxa27x_ohci_resources), - .resource = pxa27x_ohci_resources, -}; - -void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) -{ - pxa27x_device_ohci.dev.platform_data = info; -} - static struct resource i2c_power_resources[] = { { .start = 0x40f00180, @@ -430,18 +397,16 @@ void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { - &pxa_device_mci, &pxa_device_udc, - &pxa_device_fb, &pxa_device_ffuart, &pxa_device_btuart, &pxa_device_stuart, - &pxa_device_i2c, &pxa_device_i2s, - &pxa_device_ficp, &pxa_device_rtc, &pxa27x_device_i2c_power, - &pxa27x_device_ohci, + &pxa27x_device_ssp1, + &pxa27x_device_ssp2, + &pxa27x_device_ssp3, }; static int __init pxa27x_init(void) @@ -452,9 +417,9 @@ static int __init pxa27x_init(void) if ((ret = pxa_init_dma(32))) return ret; -#ifdef CONFIG_PM + pxa27x_init_pm(); -#endif + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } return ret; diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 61d9c9d69e6b..5cbf057a1b32 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -19,6 +19,7 @@ #include <linux/pm.h> #include <linux/platform_device.h> #include <linux/irq.h> +#include <linux/io.h> #include <asm/hardware.h> #include <asm/arch/pxa3xx-regs.h> @@ -86,7 +87,7 @@ unsigned int pxa3xx_get_clk_frequency_khz(int info) HSS / 1000000, (HSS % 1000000) / 10000); } - return CLK; + return CLK / 1000; } /* @@ -189,8 +190,237 @@ static struct clk pxa3xx_clks[] = { PXA3xx_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev), + PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev), + + PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), + PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), + PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), + PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev), + + PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev), + PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev), + PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev), +}; + +#ifdef CONFIG_PM +#define SLEEP_SAVE_SIZE 4 + +#define ISRAM_START 0x5c000000 +#define ISRAM_SIZE SZ_256K + +static void __iomem *sram; +static unsigned long wakeup_src; + +static void pxa3xx_cpu_pm_save(unsigned long *sleep_save) +{ + pr_debug("PM: CKENA=%08x CKENB=%08x\n", CKENA, CKENB); + + if (CKENA & (1 << CKEN_USBH)) { + printk(KERN_ERR "PM: USB host clock not stopped?\n"); + CKENA &= ~(1 << CKEN_USBH); + } +// CKENA |= 1 << (CKEN_ISC & 31); + + /* + * Low power modes require the HSIO2 clock to be enabled. + */ + CKENB |= 1 << (CKEN_HSIO2 & 31); +} + +static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save) +{ + CKENB &= ~(1 << (CKEN_HSIO2 & 31)); +} + +/* + * Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic + * memory controller has to be reinitialised, so we place some code + * in the SRAM to perform this function. + * + * We disable FIQs across the standby - otherwise, we might receive a + * FIQ while the SDRAM is unavailable. + */ +static void pxa3xx_cpu_standby(unsigned int pwrmode) +{ + extern const char pm_enter_standby_start[], pm_enter_standby_end[]; + void (*fn)(unsigned int) = (void __force *)(sram + 0x8000); + + memcpy_toio(sram + 0x8000, pm_enter_standby_start, + pm_enter_standby_end - pm_enter_standby_start); + + AD2D0SR = ~0; + AD2D1SR = ~0; + AD2D0ER = wakeup_src; + AD2D1ER = 0; + ASCR = ASCR; + ARSR = ARSR; + + local_fiq_disable(); + fn(pwrmode); + local_fiq_enable(); + + AD2D0ER = 0; + AD2D1ER = 0; + + printk("PM: AD2D0SR=%08x ASCR=%08x\n", AD2D0SR, ASCR); +} + +static void pxa3xx_cpu_pm_enter(suspend_state_t state) +{ + /* + * Don't sleep if no wakeup sources are defined + */ + if (wakeup_src == 0) + return; + + switch (state) { + case PM_SUSPEND_STANDBY: + pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2); + break; + + case PM_SUSPEND_MEM: + break; + } +} + +static int pxa3xx_cpu_pm_valid(suspend_state_t state) +{ + return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; +} + +static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = { + .save_size = SLEEP_SAVE_SIZE, + .save = pxa3xx_cpu_pm_save, + .restore = pxa3xx_cpu_pm_restore, + .valid = pxa3xx_cpu_pm_valid, + .enter = pxa3xx_cpu_pm_enter, }; +static void __init pxa3xx_init_pm(void) +{ + sram = ioremap(ISRAM_START, ISRAM_SIZE); + if (!sram) { + printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n"); + return; + } + + /* + * Since we copy wakeup code into the SRAM, we need to ensure + * that it is preserved over the low power modes. Note: bit 8 + * is undocumented in the developer manual, but must be set. + */ + AD1R |= ADXR_L2 | ADXR_R0; + AD2R |= ADXR_L2 | ADXR_R0; + AD3R |= ADXR_L2 | ADXR_R0; + + /* + * Clear the resume enable registers. + */ + AD1D0ER = 0; + AD2D0ER = 0; + AD2D1ER = 0; + AD3ER = 0; + + pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns; +} + +static int pxa3xx_set_wake(unsigned int irq, unsigned int on) +{ + unsigned long flags, mask = 0; + + switch (irq) { + case IRQ_SSP3: + mask = ADXER_MFP_WSSP3; + break; + case IRQ_MSL: + mask = ADXER_WMSL0; + break; + case IRQ_USBH2: + case IRQ_USBH1: + mask = ADXER_WUSBH; + break; + case IRQ_KEYPAD: + mask = ADXER_WKP; + break; + case IRQ_AC97: + mask = ADXER_MFP_WAC97; + break; + case IRQ_USIM: + mask = ADXER_WUSIM0; + break; + case IRQ_SSP2: + mask = ADXER_MFP_WSSP2; + break; + case IRQ_I2C: + mask = ADXER_MFP_WI2C; + break; + case IRQ_STUART: + mask = ADXER_MFP_WUART3; + break; + case IRQ_BTUART: + mask = ADXER_MFP_WUART2; + break; + case IRQ_FFUART: + mask = ADXER_MFP_WUART1; + break; + case IRQ_MMC: + mask = ADXER_MFP_WMMC1; + break; + case IRQ_SSP: + mask = ADXER_MFP_WSSP1; + break; + case IRQ_RTCAlrm: + mask = ADXER_WRTC; + break; + case IRQ_SSP4: + mask = ADXER_MFP_WSSP4; + break; + case IRQ_TSI: + mask = ADXER_WTSI; + break; + case IRQ_USIM2: + mask = ADXER_WUSIM1; + break; + case IRQ_MMC2: + mask = ADXER_MFP_WMMC2; + break; + case IRQ_NAND: + mask = ADXER_MFP_WFLASH; + break; + case IRQ_USB2: + mask = ADXER_WUSB2; + break; + case IRQ_WAKEUP0: + mask = ADXER_WEXTWAKE0; + break; + case IRQ_WAKEUP1: + mask = ADXER_WEXTWAKE1; + break; + case IRQ_MMC3: + mask = ADXER_MFP_GEN12; + break; + } + + local_irq_save(flags); + if (on) + wakeup_src |= mask; + else + wakeup_src &= ~mask; + local_irq_restore(flags); + + return 0; +} + +static void pxa3xx_init_irq_pm(void) +{ + pxa_init_irq_set_wake(pxa3xx_set_wake); +} + +#else +static inline void pxa3xx_init_pm(void) {} +static inline void pxa3xx_init_irq_pm(void) {} +#endif + void __init pxa3xx_init_irq(void) { /* enable CP6 access */ @@ -202,6 +432,7 @@ void __init pxa3xx_init_irq(void) pxa_init_irq_low(); pxa_init_irq_high(); pxa_init_irq_gpio(128); + pxa3xx_init_irq_pm(); } /* @@ -209,16 +440,16 @@ void __init pxa3xx_init_irq(void) */ static struct platform_device *devices[] __initdata = { - &pxa_device_mci, &pxa_device_udc, - &pxa_device_fb, &pxa_device_ffuart, &pxa_device_btuart, &pxa_device_stuart, - &pxa_device_i2c, &pxa_device_i2s, - &pxa_device_ficp, &pxa_device_rtc, + &pxa27x_device_ssp1, + &pxa27x_device_ssp2, + &pxa27x_device_ssp3, + &pxa3xx_device_ssp4, }; static int __init pxa3xx_init(void) @@ -231,6 +462,8 @@ static int __init pxa3xx_init(void) if ((ret = pxa_init_dma(32))) return ret; + pxa3xx_init_pm(); + return platform_add_devices(devices, ARRAY_SIZE(devices)); } return 0; diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index da4769caaf72..047909a76651 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -26,28 +26,15 @@ void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo); /* - * SharpSL Backlight + * SharpSL/Corgi LCD Driver */ -void corgi_bl_set_intensity(int intensity); -void spitz_bl_set_intensity(int intensity); -void akita_bl_set_intensity(int intensity); - - -/* - * SharpSL Touchscreen Driver - */ -unsigned long corgi_get_hsync_len(void); -unsigned long spitz_get_hsync_len(void); -void corgi_put_hsync(void); -void spitz_put_hsync(void); -void corgi_wait_hsync(void); -void spitz_wait_hsync(void); +void corgi_lcdtg_suspend(void); +void corgi_lcdtg_hw_init(int mode); /* * SharpSL Battery/PM Driver */ - #define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) /* MAX1111 Channel Definitions */ diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index d0447723b73a..14bb4a93ea52 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -16,6 +16,7 @@ #include <asm/hardware.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> #define MDREFR_KDIV 0x200a4000 // all banks #define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0 @@ -49,6 +50,7 @@ pxa_cpu_save_sp: str r0, [r1] ldr pc, [sp], #4 +#ifdef CONFIG_PXA27x /* * pxa27x_cpu_suspend() * @@ -104,9 +106,11 @@ ENTRY(pxa27x_cpu_suspend) @ align execution to a cache line b pxa_cpu_do_suspend +#endif +#ifdef CONFIG_PXA25x /* - * pxa27x_cpu_suspend() + * pxa25x_cpu_suspend() * * Forces CPU into sleep state. * @@ -169,6 +173,7 @@ ENTRY(pxa25x_cpu_suspend) mcr p14, 0, r0, c6, c0, 0 orr r0, r0, #2 @ initiate change bit b pxa_cpu_do_suspend +#endif .ltorg .align 5 @@ -208,7 +213,7 @@ pxa_cpu_do_suspend: 20: b 20b @ loop waiting for sleep /* - * cpu_pxa_resume() + * pxa_cpu_resume() * * entry point from bootloader into kernel during resume * diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 2d78199d24af..5078edeadf96 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -271,6 +271,55 @@ static struct platform_device spitzled_device = { /* * Spitz Touch Screen Device */ + +static unsigned long (*get_hsync_invperiod)(struct device *dev); + +static void inline sharpsl_wait_sync(int gpio) +{ + while((GPLR(gpio) & GPIO_bit(gpio)) == 0); + while((GPLR(gpio) & GPIO_bit(gpio)) != 0); +} + +static struct device *spitz_pxafb_dev; + +static int is_pxafb_device(struct device * dev, void * data) +{ + struct platform_device *pdev = container_of(dev, struct platform_device, dev); + + return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0); +} + +static unsigned long spitz_get_hsync_invperiod(void) +{ +#ifdef CONFIG_FB_PXA + if (!spitz_pxafb_dev) { + spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); + if (!spitz_pxafb_dev) + return 0; + } + if (!get_hsync_invperiod) + get_hsync_invperiod = symbol_get(pxafb_get_hsync_time); + if (!get_hsync_invperiod) +#endif + return 0; + + return get_hsync_invperiod(spitz_pxafb_dev); +} + +static void spitz_put_hsync(void) +{ + put_device(spitz_pxafb_dev); + if (get_hsync_invperiod) + symbol_put(pxafb_get_hsync_time); + spitz_pxafb_dev = NULL; + get_hsync_invperiod = NULL; +} + +static void spitz_wait_hsync(void) +{ + sharpsl_wait_sync(SPITZ_GPIO_HSYNC); +} + static struct resource spitzts_resources[] = { [0] = { .start = SPITZ_IRQ_GPIO_TP_INT, @@ -280,9 +329,9 @@ static struct resource spitzts_resources[] = { }; static struct corgits_machinfo spitz_ts_machinfo = { - .get_hsync_len = spitz_get_hsync_len, - .put_hsync = spitz_put_hsync, - .wait_hsync = spitz_wait_hsync, + .get_hsync_invperiod = spitz_get_hsync_invperiod, + .put_hsync = spitz_put_hsync, + .wait_hsync = spitz_wait_hsync, }; static struct platform_device spitzts_device = { @@ -325,12 +374,10 @@ static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, vo err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC card detect", data); - if (err) { + if (err) printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - return -1; - } - return 0; + return err; } static void spitz_mci_setpower(struct device *dev, unsigned int vdd) @@ -423,6 +470,14 @@ static struct pxaficp_platform_data spitz_ficp_platform_data = { * Spitz PXA Framebuffer */ +static void spitz_lcd_power(int on, struct fb_var_screeninfo *var) +{ + if (on) + corgi_lcdtg_hw_init(var->xres); + else + corgi_lcdtg_suspend(); +} + static struct pxafb_mode_info spitz_pxafb_modes[] = { { .pixclock = 19231, @@ -520,6 +575,27 @@ static void __init common_init(void) set_pxa_fb_info(&spitz_pxafb_info); } +#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) +static void spitz_bl_set_intensity(int intensity) +{ + if (intensity > 0x10) + intensity += 0x10; + + /* Bits 0-4 are accessed via the SSP interface */ + corgi_ssp_blduty_set(intensity & 0x1f); + + /* Bit 5 is via SCOOP */ + if (intensity & 0x0020) + reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); + else + set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); + + if (intensity) + set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); + else + reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); +} + static void __init spitz_init(void) { platform_scoop_config = &spitz_pcmcia_config; @@ -530,6 +606,7 @@ static void __init spitz_init(void) platform_device_register(&spitzscoop2_device); } +#endif #ifdef CONFIG_MACH_AKITA /* @@ -542,6 +619,26 @@ struct platform_device akitaioexp_device = { EXPORT_SYMBOL_GPL(akitaioexp_device); +static void akita_bl_set_intensity(int intensity) +{ + if (intensity > 0x10) + intensity += 0x10; + + /* Bits 0-4 are accessed via the SSP interface */ + corgi_ssp_blduty_set(intensity & 0x1f); + + /* Bit 5 is via IO-Expander */ + if (intensity & 0x0020) + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); + else + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); + + if (intensity) + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); + else + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); +} + static void __init akita_init(void) { spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; @@ -558,7 +655,6 @@ static void __init akita_init(void) } #endif - static void __init fixup_spitz(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 422afee88169..00af7f2fed66 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -32,45 +32,27 @@ #include <linux/ioport.h> #include <linux/init.h> #include <linux/mutex.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/platform_device.h> + #include <asm/io.h> #include <asm/irq.h> #include <asm/hardware.h> #include <asm/arch/ssp.h> #include <asm/arch/pxa-regs.h> - -#define PXA_SSP_PORTS 3 +#include <asm/arch/regs-ssp.h> #define TIMEOUT 100000 -struct ssp_info_ { - int irq; - u32 clock; -}; - -/* - * SSP port clock and IRQ settings - */ -static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = { -#if defined (CONFIG_PXA27x) - {IRQ_SSP, CKEN_SSP1}, - {IRQ_SSP2, CKEN_SSP2}, - {IRQ_SSP3, CKEN_SSP3}, -#else - {IRQ_SSP, CKEN_SSP}, - {IRQ_NSSP, CKEN_NSSP}, - {IRQ_ASSP, CKEN_ASSP}, -#endif -}; - -static DEFINE_MUTEX(mutex); -static int use_count[PXA_SSP_PORTS] = {0, 0, 0}; - static irqreturn_t ssp_interrupt(int irq, void *dev_id) { - struct ssp_dev *dev = (struct ssp_dev*) dev_id; - unsigned int status = SSSR_P(dev->port); + struct ssp_dev *dev = dev_id; + struct ssp_device *ssp = dev->ssp; + unsigned int status; - SSSR_P(dev->port) = status; /* clear status bits */ + status = __raw_readl(ssp->mmio_base + SSSR); + __raw_writel(status, ssp->mmio_base + SSSR); if (status & SSSR_ROR) printk(KERN_WARNING "SSP(%d): receiver overrun\n", dev->port); @@ -99,15 +81,16 @@ static irqreturn_t ssp_interrupt(int irq, void *dev_id) */ int ssp_write_word(struct ssp_dev *dev, u32 data) { + struct ssp_device *ssp = dev->ssp; int timeout = TIMEOUT; - while (!(SSSR_P(dev->port) & SSSR_TNF)) { + while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_TNF)) { if (!--timeout) return -ETIMEDOUT; cpu_relax(); } - SSDR_P(dev->port) = data; + __raw_writel(data, ssp->mmio_base + SSDR); return 0; } @@ -129,15 +112,16 @@ int ssp_write_word(struct ssp_dev *dev, u32 data) */ int ssp_read_word(struct ssp_dev *dev, u32 *data) { + struct ssp_device *ssp = dev->ssp; int timeout = TIMEOUT; - while (!(SSSR_P(dev->port) & SSSR_RNE)) { + while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE)) { if (!--timeout) return -ETIMEDOUT; cpu_relax(); } - *data = SSDR_P(dev->port); + *data = __raw_readl(ssp->mmio_base + SSDR); return 0; } @@ -151,17 +135,28 @@ int ssp_read_word(struct ssp_dev *dev, u32 *data) */ int ssp_flush(struct ssp_dev *dev) { + struct ssp_device *ssp = dev->ssp; int timeout = TIMEOUT * 2; + /* ensure TX FIFO is empty instead of not full */ + if (cpu_is_pxa3xx()) { + while (__raw_readl(ssp->mmio_base + SSSR) & 0xf00) { + if (!--timeout) + return -ETIMEDOUT; + cpu_relax(); + } + timeout = TIMEOUT * 2; + } + do { - while (SSSR_P(dev->port) & SSSR_RNE) { + while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE) { if (!--timeout) return -ETIMEDOUT; - (void) SSDR_P(dev->port); + (void)__raw_readl(ssp->mmio_base + SSDR); } if (!--timeout) return -ETIMEDOUT; - } while (SSSR_P(dev->port) & SSSR_BSY); + } while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_BSY); return 0; } @@ -173,7 +168,12 @@ int ssp_flush(struct ssp_dev *dev) */ void ssp_enable(struct ssp_dev *dev) { - SSCR0_P(dev->port) |= SSCR0_SSE; + struct ssp_device *ssp = dev->ssp; + uint32_t sscr0; + + sscr0 = __raw_readl(ssp->mmio_base + SSCR0); + sscr0 |= SSCR0_SSE; + __raw_writel(sscr0, ssp->mmio_base + SSCR0); } /** @@ -183,7 +183,12 @@ void ssp_enable(struct ssp_dev *dev) */ void ssp_disable(struct ssp_dev *dev) { - SSCR0_P(dev->port) &= ~SSCR0_SSE; + struct ssp_device *ssp = dev->ssp; + uint32_t sscr0; + + sscr0 = __raw_readl(ssp->mmio_base + SSCR0); + sscr0 &= ~SSCR0_SSE; + __raw_writel(sscr0, ssp->mmio_base + SSCR0); } /** @@ -192,14 +197,16 @@ void ssp_disable(struct ssp_dev *dev) * * Save the configured SSP state for suspend. */ -void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp) +void ssp_save_state(struct ssp_dev *dev, struct ssp_state *state) { - ssp->cr0 = SSCR0_P(dev->port); - ssp->cr1 = SSCR1_P(dev->port); - ssp->to = SSTO_P(dev->port); - ssp->psp = SSPSP_P(dev->port); + struct ssp_device *ssp = dev->ssp; + + state->cr0 = __raw_readl(ssp->mmio_base + SSCR0); + state->cr1 = __raw_readl(ssp->mmio_base + SSCR1); + state->to = __raw_readl(ssp->mmio_base + SSTO); + state->psp = __raw_readl(ssp->mmio_base + SSPSP); - SSCR0_P(dev->port) &= ~SSCR0_SSE; + ssp_disable(dev); } /** @@ -208,16 +215,18 @@ void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp) * * Restore the SSP configuration saved previously by ssp_save_state. */ -void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp) +void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *state) { - SSSR_P(dev->port) = SSSR_ROR | SSSR_TUR | SSSR_BCE; + struct ssp_device *ssp = dev->ssp; + uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE; - SSCR0_P(dev->port) = ssp->cr0 & ~SSCR0_SSE; - SSCR1_P(dev->port) = ssp->cr1; - SSTO_P(dev->port) = ssp->to; - SSPSP_P(dev->port) = ssp->psp; + __raw_writel(sssr, ssp->mmio_base + SSSR); - SSCR0_P(dev->port) = ssp->cr0; + __raw_writel(state->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0); + __raw_writel(state->cr1, ssp->mmio_base + SSCR1); + __raw_writel(state->to, ssp->mmio_base + SSTO); + __raw_writel(state->psp, ssp->mmio_base + SSPSP); + __raw_writel(state->cr0, ssp->mmio_base + SSCR0); } /** @@ -231,15 +240,17 @@ void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp) */ int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed) { + struct ssp_device *ssp = dev->ssp; + dev->mode = mode; dev->flags = flags; dev->psp_flags = psp_flags; dev->speed = speed; /* set up port type, speed, port settings */ - SSCR0_P(dev->port) = (dev->speed | dev->mode); - SSCR1_P(dev->port) = dev->flags; - SSPSP_P(dev->port) = dev->psp_flags; + __raw_writel((dev->speed | dev->mode), ssp->mmio_base + SSCR0); + __raw_writel(dev->flags, ssp->mmio_base + SSCR1); + __raw_writel(dev->psp_flags, ssp->mmio_base + SSPSP); return 0; } @@ -256,44 +267,32 @@ int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 spee */ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags) { + struct ssp_device *ssp; int ret; - if (port > PXA_SSP_PORTS || port == 0) + ssp = ssp_request(port, "SSP"); + if (ssp == NULL) return -ENODEV; - mutex_lock(&mutex); - if (use_count[port - 1]) { - mutex_unlock(&mutex); - return -EBUSY; - } - use_count[port - 1]++; - - if (!request_mem_region(__PREG(SSCR0_P(port)), 0x2c, "SSP")) { - use_count[port - 1]--; - mutex_unlock(&mutex); - return -EBUSY; - } + dev->ssp = ssp; dev->port = port; /* do we need to get irq */ if (!(init_flags & SSP_NO_IRQ)) { - ret = request_irq(ssp_info[port-1].irq, ssp_interrupt, + ret = request_irq(ssp->irq, ssp_interrupt, 0, "SSP", dev); if (ret) goto out_region; - dev->irq = ssp_info[port-1].irq; + dev->irq = ssp->irq; } else dev->irq = 0; /* turn on SSP port clock */ - pxa_set_cken(ssp_info[port-1].clock, 1); - mutex_unlock(&mutex); + clk_enable(ssp->clk); return 0; out_region: - release_mem_region(__PREG(SSCR0_P(port)), 0x2c); - use_count[port - 1]--; - mutex_unlock(&mutex); + ssp_free(ssp); return ret; } @@ -304,23 +303,240 @@ out_region: */ void ssp_exit(struct ssp_dev *dev) { - mutex_lock(&mutex); - SSCR0_P(dev->port) &= ~SSCR0_SSE; + struct ssp_device *ssp = dev->ssp; + + ssp_disable(dev); + free_irq(dev->irq, dev); + clk_disable(ssp->clk); + ssp_free(ssp); +} + +static DEFINE_MUTEX(ssp_lock); +static LIST_HEAD(ssp_list); + +struct ssp_device *ssp_request(int port, const char *label) +{ + struct ssp_device *ssp = NULL; + + mutex_lock(&ssp_lock); + + list_for_each_entry(ssp, &ssp_list, node) { + if (ssp->port_id == port && ssp->use_count == 0) { + ssp->use_count++; + ssp->label = label; + break; + } + } + + mutex_unlock(&ssp_lock); + + if (ssp->port_id != port) + return NULL; + + return ssp; +} +EXPORT_SYMBOL(ssp_request); + +void ssp_free(struct ssp_device *ssp) +{ + mutex_lock(&ssp_lock); + if (ssp->use_count) { + ssp->use_count--; + ssp->label = NULL; + } else + dev_err(&ssp->pdev->dev, "device already free\n"); + mutex_unlock(&ssp_lock); +} +EXPORT_SYMBOL(ssp_free); + +static int __devinit ssp_probe(struct platform_device *pdev, int type) +{ + struct resource *res; + struct ssp_device *ssp; + int ret = 0; + + ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL); + if (ssp == NULL) { + dev_err(&pdev->dev, "failed to allocate memory"); + return -ENOMEM; + } + + ssp->clk = clk_get(&pdev->dev, "SSPCLK"); + if (IS_ERR(ssp->clk)) { + ret = PTR_ERR(ssp->clk); + goto err_free; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + + res = request_mem_region(res->start, res->end - res->start + 1, + pdev->name); + if (res == NULL) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + ret = -EBUSY; + goto err_free_clk; + } + + ssp->phys_base = res->start; + + ssp->mmio_base = ioremap(res->start, res->end - res->start + 1); + if (ssp->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + ret = -ENODEV; + goto err_free_mem; + } + + ssp->irq = platform_get_irq(pdev, 0); + if (ssp->irq < 0) { + dev_err(&pdev->dev, "no IRQ resource defined\n"); + ret = -ENODEV; + goto err_free_io; + } + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no SSP RX DRCMR defined\n"); + ret = -ENODEV; + goto err_free_io; + } + ssp->drcmr_rx = res->start; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (res == NULL) { + dev_err(&pdev->dev, "no SSP TX DRCMR defined\n"); + ret = -ENODEV; + goto err_free_io; + } + ssp->drcmr_tx = res->start; + + /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id + * starts from 0, do a translation here + */ + ssp->port_id = pdev->id + 1; + ssp->use_count = 0; + ssp->type = type; + + mutex_lock(&ssp_lock); + list_add(&ssp->node, &ssp_list); + mutex_unlock(&ssp_lock); + + platform_set_drvdata(pdev, ssp); + return 0; + +err_free_io: + iounmap(ssp->mmio_base); +err_free_mem: + release_mem_region(res->start, res->end - res->start + 1); +err_free_clk: + clk_put(ssp->clk); +err_free: + kfree(ssp); + return ret; +} + +static int __devexit ssp_remove(struct platform_device *pdev) +{ + struct resource *res; + struct ssp_device *ssp; + + ssp = platform_get_drvdata(pdev); + if (ssp == NULL) + return -ENODEV; + + iounmap(ssp->mmio_base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, res->end - res->start + 1); + + clk_put(ssp->clk); - if (dev->port > PXA_SSP_PORTS || dev->port == 0) { - printk(KERN_WARNING "SSP: tried to close invalid port\n"); - mutex_unlock(&mutex); - return; + mutex_lock(&ssp_lock); + list_del(&ssp->node); + mutex_unlock(&ssp_lock); + + kfree(ssp); + return 0; +} + +static int __devinit pxa25x_ssp_probe(struct platform_device *pdev) +{ + return ssp_probe(pdev, PXA25x_SSP); +} + +static int __devinit pxa25x_nssp_probe(struct platform_device *pdev) +{ + return ssp_probe(pdev, PXA25x_NSSP); +} + +static int __devinit pxa27x_ssp_probe(struct platform_device *pdev) +{ + return ssp_probe(pdev, PXA27x_SSP); +} + +static struct platform_driver pxa25x_ssp_driver = { + .driver = { + .name = "pxa25x-ssp", + }, + .probe = pxa25x_ssp_probe, + .remove = __devexit_p(ssp_remove), +}; + +static struct platform_driver pxa25x_nssp_driver = { + .driver = { + .name = "pxa25x-nssp", + }, + .probe = pxa25x_nssp_probe, + .remove = __devexit_p(ssp_remove), +}; + +static struct platform_driver pxa27x_ssp_driver = { + .driver = { + .name = "pxa27x-ssp", + }, + .probe = pxa27x_ssp_probe, + .remove = __devexit_p(ssp_remove), +}; + +static int __init pxa_ssp_init(void) +{ + int ret = 0; + + ret = platform_driver_register(&pxa25x_ssp_driver); + if (ret) { + printk(KERN_ERR "failed to register pxa25x_ssp_driver"); + return ret; + } + + ret = platform_driver_register(&pxa25x_nssp_driver); + if (ret) { + printk(KERN_ERR "failed to register pxa25x_nssp_driver"); + return ret; + } + + ret = platform_driver_register(&pxa27x_ssp_driver); + if (ret) { + printk(KERN_ERR "failed to register pxa27x_ssp_driver"); + return ret; } - pxa_set_cken(ssp_info[dev->port-1].clock, 0); - if (dev->irq) - free_irq(dev->irq, dev); - release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c); - use_count[dev->port - 1]--; - mutex_unlock(&mutex); + return ret; +} + +static void __exit pxa_ssp_exit(void) +{ + platform_driver_unregister(&pxa25x_ssp_driver); + platform_driver_unregister(&pxa25x_nssp_driver); + platform_driver_unregister(&pxa27x_ssp_driver); } +arch_initcall(pxa_ssp_init); +module_exit(pxa_ssp_exit); + EXPORT_SYMBOL(ssp_write_word); EXPORT_SYMBOL(ssp_read_word); EXPORT_SYMBOL(ssp_flush); diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index d774430d02c0..167412e6bec8 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -17,6 +17,7 @@ .text +#ifdef CONFIG_PXA27x ENTRY(pxa_cpu_standby) ldr r0, =PSSR mov r1, #(PSSR_PH | PSSR_STS) @@ -29,3 +30,85 @@ ENTRY(pxa_cpu_standby) 1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby str r1, [r0] @ make sure PSSR_PH/STS are clear mov pc, lr + +#endif + +#ifdef CONFIG_PXA3xx + +#define MDCNFG 0x0000 +#define MDCNFG_DMCEN (1 << 30) +#define DDR_HCAL 0x0060 +#define DDR_HCAL_HCRNG 0x1f +#define DDR_HCAL_HCPROG (1 << 28) +#define DDR_HCAL_HCEN (1 << 31) +#define DMCIER 0x0070 +#define DMCIER_EDLP (1 << 29) +#define DMCISR 0x0078 +#define RCOMP 0x0100 +#define RCOMP_SWEVAL (1 << 31) + +ENTRY(pm_enter_standby_start) + mov r1, #0xf6000000 @ DMEMC_REG_BASE (MDCNFG) + add r1, r1, #0x00100000 + + /* + * Preload the TLB entry for accessing the dynamic memory + * controller registers. Note that page table lookups will + * fail until the dynamic memory controller has been + * reinitialised - and that includes MMU page table walks. + * This also means that only the dynamic memory controller + * can be reliably accessed in the code following standby. + */ + ldr r2, [r1] @ Dummy read MDCNFG + + mcr p14, 0, r0, c7, c0, 0 + .rept 8 + nop + .endr + + ldr r0, [r1, #DDR_HCAL] @ Clear (and wait for) HCEN + bic r0, r0, #DDR_HCAL_HCEN + str r0, [r1, #DDR_HCAL] +1: ldr r0, [r1, #DDR_HCAL] + tst r0, #DDR_HCAL_HCEN + bne 1b + + ldr r0, [r1, #RCOMP] @ Initiate RCOMP + orr r0, r0, #RCOMP_SWEVAL + str r0, [r1, #RCOMP] + + mov r0, #~0 @ Clear interrupts + str r0, [r1, #DMCISR] + + ldr r0, [r1, #DMCIER] @ set DMIER[EDLP] + orr r0, r0, #DMCIER_EDLP + str r0, [r1, #DMCIER] + + ldr r0, [r1, #DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN + bic r0, r0, #DDR_HCAL_HCRNG + orr r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG + str r0, [r1, #DDR_HCAL] + +1: ldr r0, [r1, #DMCISR] + tst r0, #DMCIER_EDLP + beq 1b + + ldr r0, [r1, #MDCNFG] @ set MDCNFG[DMCEN] + orr r0, r0, #MDCNFG_DMCEN + str r0, [r1, #MDCNFG] +1: ldr r0, [r1, #MDCNFG] + tst r0, #MDCNFG_DMCEN + beq 1b + + ldr r0, [r1, #DDR_HCAL] @ set DDR_HCAL[HCRNG] + orr r0, r0, #2 @ HCRNG + str r0, [r1, #DDR_HCAL] + + ldr r0, [r1, #DMCIER] @ Clear the interrupt + bic r0, r0, #0x20000000 + str r0, [r1, #DMCIER] + + mov pc, lr +ENTRY(pm_enter_standby_end) + +#endif diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index fbfa1920353d..7b7c0179795b 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -59,55 +59,17 @@ unsigned long long sched_clock(void) } +#define MIN_OSCR_DELTA 16 + static irqreturn_t pxa_ost0_interrupt(int irq, void *dev_id) { - int next_match; struct clock_event_device *c = dev_id; - if (c->mode == CLOCK_EVT_MODE_ONESHOT) { - /* Disarm the compare/match, signal the event. */ - OIER &= ~OIER_E0; - OSSR = OSSR_M0; - c->event_handler(c); - } else if (c->mode == CLOCK_EVT_MODE_PERIODIC) { - /* Call the event handler as many times as necessary - * to recover missed events, if any (if we update - * OSMR0 and OSCR0 is still ahead of us, we've missed - * the event). As we're dealing with that, re-arm the - * compare/match for the next event. - * - * HACK ALERT: - * - * There's a latency between the instruction that - * writes to OSMR0 and the actual commit to the - * physical hardware, because the CPU doesn't (have - * to) run at bus speed, there's a write buffer - * between the CPU and the bus, etc. etc. So if the - * target OSCR0 is "very close", to the OSMR0 load - * value, the update to OSMR0 might not get to the - * hardware in time and we'll miss that interrupt. - * - * To be safe, if the new OSMR0 is "very close" to the - * target OSCR0 value, we call the event_handler as - * though the event actually happened. According to - * Nico's comment in the previous version of this - * code, experience has shown that 6 OSCR ticks is - * "very close" but he went with 8. We will use 16, - * based on the results of testing on PXA270. - * - * To be doubly sure, we also tell clkevt via - * clockevents_register_device() not to ask for - * anything that might put us "very close". - */ -#define MIN_OSCR_DELTA 16 - do { - OSSR = OSSR_M0; - next_match = (OSMR0 += LATCH); - c->event_handler(c); - } while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA) - && (c->mode == CLOCK_EVT_MODE_PERIODIC)); - } + /* Disarm the compare/match, signal the event. */ + OIER &= ~OIER_E0; + OSSR = OSSR_M0; + c->event_handler(c); return IRQ_HANDLED; } @@ -133,14 +95,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) unsigned long irqflags; switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - raw_local_irq_save(irqflags); - OSSR = OSSR_M0; - OIER |= OIER_E0; - OSMR0 = OSCR + LATCH; - raw_local_irq_restore(irqflags); - break; - case CLOCK_EVT_MODE_ONESHOT: raw_local_irq_save(irqflags); OIER &= ~OIER_E0; @@ -158,13 +112,14 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) break; case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_PERIODIC: break; } } static struct clock_event_device ckevt_pxa_osmr0 = { .name = "osmr0", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .features = CLOCK_EVT_FEAT_ONESHOT, .shift = 32, .rating = 200, .cpumask = CPU_MASK_CPU0, @@ -214,7 +169,7 @@ static void __init pxa_timer_init(void) ckevt_pxa_osmr0.max_delta_ns = clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0); ckevt_pxa_osmr0.min_delta_ns = - clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1; + clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1; cksrc_pxa_oscr0.mult = clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift); @@ -226,7 +181,7 @@ static void __init pxa_timer_init(void) } #ifdef CONFIG_PM -static unsigned long osmr[4], oier; +static unsigned long osmr[4], oier, oscr; static void pxa_timer_suspend(void) { @@ -235,23 +190,26 @@ static void pxa_timer_suspend(void) osmr[2] = OSMR2; osmr[3] = OSMR3; oier = OIER; + oscr = OSCR; } static void pxa_timer_resume(void) { + /* + * Ensure that we have at least MIN_OSCR_DELTA between match + * register 0 and the OSCR, to guarantee that we will receive + * the one-shot timer interrupt. We adjust OSMR0 in preference + * to OSCR to guarantee that OSCR is monotonically incrementing. + */ + if (osmr[0] - oscr < MIN_OSCR_DELTA) + osmr[0] += MIN_OSCR_DELTA; + OSMR0 = osmr[0]; OSMR1 = osmr[1]; OSMR2 = osmr[2]; OSMR3 = osmr[3]; OIER = oier; - - /* - * OSCR0 is the system timer, which has to increase - * monotonically until it rolls over in hardware. The value - * (OSMR0 - LATCH) is OSCR0 at the most recent system tick, - * which is a handy value to restore to OSCR0. - */ - OSCR = OSMR0 - LATCH; + OSCR = oscr; } #else #define pxa_timer_suspend NULL diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 240fd042083d..1919756900f4 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -184,16 +184,13 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); - err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, IRQF_DISABLED, + err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, + IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC/SD card detect", data); - if (err) { + if (err) printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - return -1; - } - - set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); - return 0; + return err; } static void tosa_mci_setpower(struct device *dev, unsigned int vdd) diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index e4ba43bdf85d..853fc9433750 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -296,11 +296,10 @@ static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, v err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING, "MMC card detect", data); - if (err) { + if (err) printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - return -1; - } - return 0; + + return err; } static void trizeps4_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 743a87b2faa1..7731d50dd86c 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -25,9 +25,13 @@ #include <asm/arch/gpio.h> #include <asm/arch/pxafb.h> #include <asm/arch/zylonite.h> +#include <asm/arch/mmc.h> #include "generic.h" +#define MAX_SLOTS 3 +struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS]; + int gpio_backlight; int gpio_eth_irq; @@ -43,7 +47,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = -1, /* for run-time assignment */ .end = -1, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -156,6 +160,95 @@ static void __init zylonite_init_lcd(void) static inline void zylonite_init_lcd(void) {} #endif +#if defined(CONFIG_MMC) +static int zylonite_mci_ro(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + + return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp); +} + +static int zylonite_mci_init(struct device *dev, + irq_handler_t zylonite_detect_int, + void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + int err, cd_irq, gpio_cd, gpio_wp; + + cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); + gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; + gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; + + /* + * setup GPIO for Zylonite MMC controller + */ + err = gpio_request(gpio_cd, "mmc card detect"); + if (err) + goto err_request_cd; + gpio_direction_input(gpio_cd); + + err = gpio_request(gpio_wp, "mmc write protect"); + if (err) + goto err_request_wp; + gpio_direction_input(gpio_wp); + + err = request_irq(cd_irq, zylonite_detect_int, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: MMC/SD/SDIO: " + "can't request card detect IRQ\n", __func__); + goto err_request_irq; + } + + return 0; + +err_request_irq: + gpio_free(gpio_wp); +err_request_wp: + gpio_free(gpio_cd); +err_request_cd: + return err; +} + +static void zylonite_mci_exit(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + int cd_irq, gpio_cd, gpio_wp; + + cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); + gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; + gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; + + free_irq(cd_irq, data); + gpio_free(gpio_cd); + gpio_free(gpio_wp); +} + +static struct pxamci_platform_data zylonite_mci_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = zylonite_mci_init, + .exit = zylonite_mci_exit, + .get_ro = zylonite_mci_ro, +}; + +static struct pxamci_platform_data zylonite_mci2_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, +}; + +static void __init zylonite_init_mmc(void) +{ + pxa_set_mci_info(&zylonite_mci_platform_data); + pxa3xx_set_mci2_info(&zylonite_mci2_platform_data); + if (cpu_is_pxa310()) + pxa3xx_set_mci3_info(&zylonite_mci_platform_data); +} +#else +static inline void zylonite_init_mmc(void) {} +#endif + static void __init zylonite_init(void) { /* board-processor specific initialization */ @@ -171,6 +264,7 @@ static void __init zylonite_init(void) platform_device_register(&smc91x_device); zylonite_init_lcd(); + zylonite_init_mmc(); } MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 1832bc316501..6ac04c09b0e9 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -53,13 +53,13 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { /* BTUART */ GPIO111_UART2_RTS, - GPIO112_UART2_RXD, + GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL, GPIO113_UART2_TXD, - GPIO114_UART2_CTS, + GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH, /* STUART */ GPIO109_UART3_TXD, - GPIO110_UART3_RXD, + GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL, /* AC97 */ GPIO23_AC97_nACRESET, @@ -70,16 +70,16 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO28_AC97_SYNC, /* Keypad */ - GPIO107_KP_DKIN_0, - GPIO108_KP_DKIN_1, - GPIO115_KP_MKIN_0, - GPIO116_KP_MKIN_1, - GPIO117_KP_MKIN_2, - GPIO118_KP_MKIN_3, - GPIO119_KP_MKIN_4, - GPIO120_KP_MKIN_5, - GPIO2_2_KP_MKIN_6, - GPIO3_2_KP_MKIN_7, + GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH, + GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH, + GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH, + GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH, + GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH, + GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH, + GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH, + GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH, + GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH, + GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH, GPIO121_KP_MKOUT_0, GPIO122_KP_MKOUT_1, GPIO123_KP_MKOUT_2, @@ -88,16 +88,33 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO4_2_KP_MKOUT_5, GPIO5_2_KP_MKOUT_6, GPIO6_2_KP_MKOUT_7, + + /* MMC1 */ + GPIO3_MMC1_DAT0, + GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH, + GPIO5_MMC1_DAT2, + GPIO6_MMC1_DAT3, + GPIO7_MMC1_CLK, + GPIO8_MMC1_CMD, /* CMD0 for slot 0 */ + GPIO15_GPIO, /* CMD1 default as GPIO for slot 0 */ + + /* MMC2 */ + GPIO9_MMC2_DAT0, + GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH, + GPIO11_MMC2_DAT2, + GPIO12_MMC2_DAT3, + GPIO13_MMC2_CLK, + GPIO14_MMC2_CMD, }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { /* FFUART */ - GPIO30_UART1_RXD, + GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL, GPIO31_UART1_TXD, GPIO32_UART1_CTS, GPIO37_UART1_RTS, GPIO33_UART1_DCD, - GPIO34_UART1_DSR, + GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL, GPIO35_UART1_RI, GPIO36_UART1_DTR, @@ -108,7 +125,7 @@ static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { static mfp_cfg_t pxa310_mfp_cfg[] __initdata = { /* FFUART */ - GPIO99_UART1_RXD, + GPIO99_UART1_RXD | MFP_LPM_EDGE_FALL, GPIO100_UART1_TXD, GPIO101_UART1_CTS, GPIO106_UART1_RTS, @@ -116,6 +133,14 @@ static mfp_cfg_t pxa310_mfp_cfg[] __initdata = { /* Ethernet */ GPIO2_nCS3, GPIO102_GPIO, + + /* MMC3 */ + GPIO7_2_MMC3_DAT0, + GPIO8_2_MMC3_DAT1 | MFP_LPM_EDGE_BOTH, + GPIO9_2_MMC3_DAT2, + GPIO10_2_MMC3_DAT3, + GPIO103_MMC3_CLK, + GPIO105_MMC3_CMD, }; #define NUM_LCD_DETECT_PINS 7 @@ -174,6 +199,10 @@ void __init zylonite_pxa300_init(void) /* GPIO pin assignment */ gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20); + + /* MMC card detect & write protect for controller 0 */ + zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0); + zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2); } if (cpu_is_pxa300()) { @@ -184,5 +213,9 @@ void __init zylonite_pxa300_init(void) if (cpu_is_pxa310()) { pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg)); gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102); + + /* MMC card detect & write protect for controller 2 */ + zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30); + zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31); } } diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 94c715808b59..dfa79992b8ab 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -51,11 +51,11 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO17_2_LCD_BIAS, /* FFUART */ - GPIO41_UART1_RXD, + GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL, GPIO42_UART1_TXD, GPIO43_UART1_CTS, GPIO44_UART1_DCD, - GPIO45_UART1_DSR, + GPIO45_UART1_DSR | MFP_LPM_EDGE_FALL, GPIO46_UART1_RI, GPIO47_UART1_DTR, GPIO48_UART1_RTS, @@ -73,16 +73,16 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO33_I2C_SDA, /* Keypad */ - GPIO105_KP_DKIN_0, - GPIO106_KP_DKIN_1, - GPIO113_KP_MKIN_0, - GPIO114_KP_MKIN_1, - GPIO115_KP_MKIN_2, - GPIO116_KP_MKIN_3, - GPIO117_KP_MKIN_4, - GPIO118_KP_MKIN_5, - GPIO119_KP_MKIN_6, - GPIO120_KP_MKIN_7, + GPIO105_KP_DKIN_0 | MFP_LPM_EDGE_BOTH, + GPIO106_KP_DKIN_1 | MFP_LPM_EDGE_BOTH, + GPIO113_KP_MKIN_0 | MFP_LPM_EDGE_BOTH, + GPIO114_KP_MKIN_1 | MFP_LPM_EDGE_BOTH, + GPIO115_KP_MKIN_2 | MFP_LPM_EDGE_BOTH, + GPIO116_KP_MKIN_3 | MFP_LPM_EDGE_BOTH, + GPIO117_KP_MKIN_4 | MFP_LPM_EDGE_BOTH, + GPIO118_KP_MKIN_5 | MFP_LPM_EDGE_BOTH, + GPIO119_KP_MKIN_6 | MFP_LPM_EDGE_BOTH, + GPIO120_KP_MKIN_7 | MFP_LPM_EDGE_BOTH, GPIO121_KP_MKOUT_0, GPIO122_KP_MKOUT_1, GPIO123_KP_MKOUT_2, @@ -95,6 +95,23 @@ static mfp_cfg_t mfp_cfg[] __initdata = { /* Ethernet */ GPIO4_nCS3, GPIO90_GPIO, + + /* MMC1 */ + GPIO18_MMC1_DAT0, + GPIO19_MMC1_DAT1 | MFP_LPM_EDGE_BOTH, + GPIO20_MMC1_DAT2, + GPIO21_MMC1_DAT3, + GPIO22_MMC1_CLK, + GPIO23_MMC1_CMD,/* CMD0 for slot 0 */ + GPIO31_GPIO, /* CMD1 default as GPIO for slot 0 */ + + /* MMC2 */ + GPIO24_MMC2_DAT0, + GPIO25_MMC2_DAT1 | MFP_LPM_EDGE_BOTH, + GPIO26_MMC2_DAT2, + GPIO27_MMC2_DAT3, + GPIO28_MMC2_CLK, + GPIO29_MMC2_CMD, }; #define NUM_LCD_DETECT_PINS 7 @@ -169,5 +186,9 @@ void __init zylonite_pxa320_init(void) /* GPIO pin assignment */ gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO14); gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO9); + + /* MMC card detect & write protect for controller 0 */ + zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1); + zylonite_mmc_slot[0].gpio_wp = mfp_to_gpio(MFP_PIN_GPIO5); } } diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index c7f1b44da40d..61d70218f1e8 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -530,8 +530,6 @@ static unsigned long realview_gettimeoffset(void) */ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); - // ...clear the interrupt writel(1, TIMER0_VA_BASE + TIMER_INTCLR); @@ -542,8 +540,6 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id) update_process_times(user_mode(get_irq_regs())); #endif - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 587864fe25fb..66175471fff3 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -530,7 +530,7 @@ static struct s3c2410fb_mach_info __initdata bast_fb_info = { .displays = bast_lcd_info, .num_displays = ARRAY_SIZE(bast_lcd_info), - .default_display = 4, + .default_display = 1, }; /* Standard BAST devices */ @@ -540,7 +540,6 @@ static struct platform_device *bast_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c, - &s3c_device_iis, &s3c_device_rtc, &s3c_device_nand, &bast_device_nor, diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 9f43f3f124f5..3aade7b78fe5 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -365,7 +365,6 @@ static struct platform_device *vr1000_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c, - &s3c_device_iis, &s3c_device_adc, &serial_device, &vr1000_nor, diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index bcd562ac1d3d..6aec86a5da56 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -60,7 +60,7 @@ usb_simtec_powercontrol(int port, int to) static irqreturn_t usb_simtec_ocirq(int irq, void *pw) { - struct s3c2410_hcd_info *info = (struct s3c2410_hcd_info *)pw; + struct s3c2410_hcd_info *info = pw; if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) { pr_debug("usb_simtec: over-current irq (oc detected)\n"); diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index 8e8fe48ea47f..0b43431d4b75 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -10,6 +10,7 @@ config CPU_S3C2412 select CPU_LLSERIAL_S3C2440 select S3C2412_PM if PM select S3C2412_DMA if S3C2410_DMA + select S3C2410_GPIO help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index f8e011691b31..267f3348301e 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -12,8 +12,9 @@ obj- := obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_CPU_S3C2412) += irq.o obj-$(CONFIG_CPU_S3C2412) += clock.o +obj-$(CONFIG_CPU_S3C2412) += gpio.o obj-$(CONFIG_S3C2412_DMA) += dma.o -obj-$(CONFIG_S3C2412_PM) += pm.o +obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o # Machine support diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 458993601897..2697a65ba727 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -217,7 +217,7 @@ static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) if (parent == &clk_mdivclk) clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL; - else if (parent == &clk_upll) + else if (parent == &clk_mpll) clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL; else return -EINVAL; @@ -234,6 +234,45 @@ static struct clk clk_msysclk = { .set_parent = s3c2412_setparent_msysclk, }; +static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent) +{ + unsigned long flags; + unsigned long clkdiv; + unsigned long dvs; + + /* Note, we current equate fclk andf msysclk for S3C2412 */ + + if (parent == &clk_msysclk || parent == &clk_f) + dvs = 0; + else if (parent == &clk_h) + dvs = S3C2412_CLKDIVN_DVSEN; + else + return -EINVAL; + + clk->parent = parent; + + /* update this under irq lockdown, clkdivn is not protected + * by the clock system. */ + + local_irq_save(flags); + + clkdiv = __raw_readl(S3C2410_CLKDIVN); + clkdiv &= ~S3C2412_CLKDIVN_DVSEN; + clkdiv |= dvs; + __raw_writel(clkdiv, S3C2410_CLKDIVN); + + local_irq_restore(flags); + + return 0; +} + +static struct clk clk_armclk = { + .name = "armclk", + .id = -1, + .parent = &clk_msysclk, + .set_parent = s3c2412_setparent_armclk, +}; + /* these next clocks have an divider immediately after them, * so we can register them with their divider and leave out the * intermediate clock stage @@ -630,11 +669,13 @@ static struct clk *clks[] __initdata = { &clk_erefclk, &clk_urefclk, &clk_mrefclk, + &clk_armclk, }; int __init s3c2412_baseclk_add(void) { unsigned long clkcon = __raw_readl(S3C2410_CLKCON); + unsigned int dvs; struct clk *clkp; int ret; int ptr; @@ -643,6 +684,8 @@ int __init s3c2412_baseclk_add(void) clk_usb_bus.parent = &clk_usbsrc; clk_usb_bus.rate = 0x0; + clk_f.parent = &clk_msysclk; + s3c2412_clk_initparents(); for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { @@ -655,6 +698,15 @@ int __init s3c2412_baseclk_add(void) } } + /* set the dvs state according to what we got at boot time */ + + dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN; + + if (dvs) + clk_armclk.parent = &clk_h; + + printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off"); + /* ensure usb bus clock is within correct rate of 48MHz */ if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) { diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 53c1d5bbce19..1dd864993566 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -30,6 +30,7 @@ #include <asm/arch/regs-mem.h> #include <asm/arch/regs-lcd.h> #include <asm/arch/regs-sdi.h> +#include <asm/plat-s3c24xx/regs-s3c2412-iis.h> #include <asm/plat-s3c24xx/regs-iis.h> #include <asm/plat-s3c24xx/regs-spi.h> @@ -39,106 +40,141 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { [DMACH_XD0] = { .name = "xdreq0", .channels = MAP(S3C2412_DMAREQSEL_XDREQ0), + .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ0), }, [DMACH_XD1] = { .name = "xdreq1", .channels = MAP(S3C2412_DMAREQSEL_XDREQ1), + .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ1), }, [DMACH_SDI] = { .name = "sdi", .channels = MAP(S3C2412_DMAREQSEL_SDI), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + .channels_rx = MAP(S3C2412_DMAREQSEL_SDI), + .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA, + .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA, }, [DMACH_SPI0] = { .name = "spi0", .channels = MAP(S3C2412_DMAREQSEL_SPI0TX), + .channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX), .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), + .channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX), .hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT, .hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_0), + .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0), .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_0), + .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0), .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_0), + .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0), .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART0_SRC2] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_1), + .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1), .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1_SRC2] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_1), + .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1), .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_1), + .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1), .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", .channels = MAP(S3C2412_DMAREQSEL_TIMER), + .channels_rx = MAP(S3C2412_DMAREQSEL_TIMER), }, [DMACH_I2S_IN] = { .name = "i2s-sdi", .channels = MAP(S3C2412_DMAREQSEL_I2SRX), - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + .channels_rx = MAP(S3C2412_DMAREQSEL_I2SRX), + .hw_addr.from = S3C2410_PA_IIS + S3C2412_IISRXD, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels = MAP(S3C2412_DMAREQSEL_I2STX), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .channels_rx = MAP(S3C2412_DMAREQSEL_I2STX), + .hw_addr.to = S3C2410_PA_IIS + S3C2412_IISTXD, }, [DMACH_USB_EP1] = { .name = "usb-ep1", .channels = MAP(S3C2412_DMAREQSEL_USBEP1), + .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP1), }, [DMACH_USB_EP2] = { .name = "usb-ep2", .channels = MAP(S3C2412_DMAREQSEL_USBEP2), + .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP2), }, [DMACH_USB_EP3] = { .name = "usb-ep3", .channels = MAP(S3C2412_DMAREQSEL_USBEP3), + .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP3), }, [DMACH_USB_EP4] = { .name = "usb-ep4", .channels = MAP(S3C2412_DMAREQSEL_USBEP4), + .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP4), }, }; +static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map, + enum s3c2410_dmasrc dir) +{ + unsigned long chsel; + + if (dir == S3C2410_DMASRC_HW) + chsel = map->channels_rx[0]; + else + chsel = map->channels[0]; + + chsel &= ~DMA_CH_VALID; + chsel |= S3C2412_DMAREQSEL_HW; + + writel(chsel, chan->regs + S3C2412_DMA_DMAREQSEL); +} + static void s3c2412_dma_select(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map) { - writel(map->channels[0] | S3C2412_DMAREQSEL_HW, - chan->regs + S3C2412_DMA_DMAREQSEL); + s3c2412_dma_direction(chan, map, chan->source); } static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { .select = s3c2412_dma_select, + .direction = s3c2412_dma_direction, .dcon_mask = 0, .map = s3c2412_dma_mappings, .map_size = ARRAY_SIZE(s3c2412_dma_mappings), diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c new file mode 100644 index 000000000000..8e55c3a2eab8 --- /dev/null +++ b/arch/arm/mach-s3c2412/gpio.c @@ -0,0 +1,60 @@ +/* linux/arch/arm/mach-s3c2412/gpio.c + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/. + * + * S3C2412/S3C2413 specific GPIO support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/interrupt.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/regs-gpio.h> + +#include <asm/hardware.h> + +int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state) +{ + void __iomem *base = S3C24XX_GPIO_BASE(pin); + unsigned long offs = S3C2410_GPIO_OFFSET(pin); + unsigned long flags; + unsigned long slpcon; + + offs *= 2; + + if (pin < S3C2410_GPIO_BANKB) + return -EINVAL; + + if (pin >= S3C2410_GPIO_BANKF && + pin <= S3C2410_GPIO_BANKG) + return -EINVAL; + + if (pin > (S3C2410_GPIO_BANKH + 32)) + return -EINVAL; + + local_irq_save(flags); + + slpcon = __raw_readl(base + 0x0C); + + slpcon &= ~(3 << offs); + slpcon |= state << offs; + + __raw_writel(slpcon, base + 0x0C); + + local_irq_restore(flags); + + return 0; +} + +EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg); diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c index e9d0c769f5da..cc1917bf952a 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c2412/irq.c @@ -33,6 +33,7 @@ #include <asm/arch/regs-irq.h> #include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-power.h> #include <asm/plat-s3c24xx/cpu.h> #include <asm/plat-s3c24xx/irq.h> @@ -153,6 +154,22 @@ static struct irq_chip s3c2412_irq_cfsdi = { .unmask = s3c2412_irq_cfsdi_unmask, }; +static int s3c2412_irq_rtc_wake(unsigned int irqno, unsigned int state) +{ + unsigned long pwrcfg; + + pwrcfg = __raw_readl(S3C2412_PWRCFG); + if (state) + pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ; + else + pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ; + __raw_writel(pwrcfg, S3C2412_PWRCFG); + + return s3c_irq_chip.set_wake(irqno, state); +} + +static struct irq_chip s3c2412_irq_rtc_chip; + static int s3c2412_irq_add(struct sys_device *sysdev) { unsigned int irqno; @@ -173,6 +190,13 @@ static int s3c2412_irq_add(struct sys_device *sysdev) set_irq_flags(irqno, IRQF_VALID); } + /* change RTC IRQ's set wake method */ + + s3c2412_irq_rtc_chip = s3c_irq_chip; + s3c2412_irq_rtc_chip.set_wake = s3c2412_irq_rtc_wake; + + set_irq_chip(IRQ_RTC, &s3c2412_irq_rtc_chip); + return 0; } diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index 8988dac388a9..d4ffb2d98076 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -33,6 +33,8 @@ #include <asm/plat-s3c24xx/s3c2412.h> +extern void s3c2412_sleep_enter(void); + static void s3c2412_cpu_suspend(void) { unsigned long tmp; @@ -43,20 +45,7 @@ static void s3c2412_cpu_suspend(void) tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP; __raw_writel(tmp, S3C2412_PWRCFG); - /* issue the standby signal into the pm unit. Note, we - * issue a write-buffer drain just in case */ - - tmp = 0; - - asm("b 1f\n\t" - ".align 5\n\t" - "1:\n\t" - "mcr p15, 0, %0, c7, c10, 4\n\t" - "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp)); - - /* we should never get past here */ - - panic("sleep resumed to originator?"); + s3c2412_sleep_enter(); } static void s3c2412_pm_prepare(void) @@ -88,7 +77,6 @@ static struct sleep_save s3c2412_sleep[] = { SAVE_ITEM(S3C2412_GPBSLPCON), SAVE_ITEM(S3C2412_GPCSLPCON), SAVE_ITEM(S3C2412_GPDSLPCON), - SAVE_ITEM(S3C2412_GPESLPCON), SAVE_ITEM(S3C2412_GPFSLPCON), SAVE_ITEM(S3C2412_GPGSLPCON), SAVE_ITEM(S3C2412_GPHSLPCON), diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 265cd3f567a3..abf1599c9f97 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -168,6 +168,8 @@ void __init s3c2412_init_clocks(int xtal) fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2); + clk_mpll.rate = fclk; + tmp = __raw_readl(S3C2410_CLKDIVN); /* work out clock scalings */ diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S new file mode 100644 index 000000000000..db32cac4199a --- /dev/null +++ b/arch/arm/mach-s3c2412/sleep.S @@ -0,0 +1,68 @@ +/* linux/arch/arm/mach-s3c2412/sleep.S + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2412 Power Manager low-level sleep support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/hardware.h> +#include <asm/arch/map.h> + +#include <asm/arch/regs-irq.h> + + .text + + .global s3c2412_sleep_enter + +s3c2412_sleep_enter: + mov r0, #0 /* argument for coprocessors */ + ldr r1, =S3C2410_INTPND + ldr r2, =S3C2410_SRCPND + ldr r3, =S3C2410_EINTPEND + + teq r0, r0 + bl s3c2412_sleep_enter1 + teq pc, r0 + bl s3c2412_sleep_enter1 + + .align 5 + + /* this is called twice, first with the Z flag to ensure that the + * instructions have been loaded into the cache, and the second + * time to try and suspend the system. + */ +s3c2412_sleep_enter1: + mcr p15, 0, r0, c7, c10, 4 + mcrne p15, 0, r0, c7, c0, 4 + + /* if we return from here, it is because an interrupt was + * active when we tried to shutdown. Try and ack the IRQ and + * retry, as simply returning causes the system to lock. + */ + + ldrne r9, [ r1 ] + strne r9, [ r1 ] + ldrne r9, [ r2 ] + strne r9, [ r2 ] + ldrne r9, [ r3 ] + strne r9, [ r3 ] + bne s3c2412_sleep_enter1 + + mov pc, r14 diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index 79e2ea4adaf3..184d804934c9 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -111,14 +111,9 @@ static struct clk s3c2440_clk_ac97 = { static int s3c2440_clk_add(struct sys_device *sysdev) { - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; + struct clk *clock_upll; struct clk *clock_h; struct clk *clock_p; - struct clk *clock_upll; - - printk("S3C2440: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); clock_p = clk_get(NULL, "pclk"); clock_h = clk_get(NULL, "hclk"); @@ -129,21 +124,6 @@ static int s3c2440_clk_add(struct sys_device *sysdev) return -EINVAL; } - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - mutex_lock(&clocks_mutex); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - mutex_unlock(&clocks_mutex); - } - s3c2440_clk_cam.parent = clock_h; s3c2440_clk_ac97.parent = clock_p; s3c2440_clk_cam_upll.parent = clock_upll; diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c index 5b9e830ac4d3..2d030d439fe9 100644 --- a/arch/arm/mach-s3c2442/clock.c +++ b/arch/arm/mach-s3c2442/clock.c @@ -115,14 +115,9 @@ static struct clk s3c2442_clk_cam_upll = { static int s3c2442_clk_add(struct sys_device *sysdev) { - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; + struct clk *clock_upll; struct clk *clock_h; struct clk *clock_p; - struct clk *clock_upll; - - printk("S3C2442: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); clock_p = clk_get(NULL, "pclk"); clock_h = clk_get(NULL, "hclk"); @@ -133,21 +128,6 @@ static int s3c2442_clk_add(struct sys_device *sysdev) return -EINVAL; } - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - mutex_lock(&clocks_mutex); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - mutex_unlock(&clocks_mutex); - } - s3c2442_clk_cam.parent = clock_h; s3c2442_clk_cam_upll.parent = clock_upll; diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c index 59703c6fb29b..06206ceb312e 100644 --- a/arch/arm/mach-sa1100/ssp.c +++ b/arch/arm/mach-sa1100/ssp.c @@ -29,9 +29,8 @@ static irqreturn_t ssp_interrupt(int irq, void *dev_id) { unsigned int status = Ser4SSSR; - if (status & SSSR_ROR) { + if (status & SSSR_ROR) printk(KERN_WARNING "SSP: receiver overrun\n"); - } Ser4SSSR = SSSR_ROR; diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index fdf7b016e7ad..c2677368d6af 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -14,6 +14,7 @@ #include <linux/irq.h> #include <linux/timex.h> #include <linux/signal.h> +#include <linux/clocksource.h> #include <asm/mach/time.h> #include <asm/hardware.h> @@ -35,23 +36,6 @@ static int sa1100_set_rtc(void) return 0; } -/* IRQs are disabled before entering here from do_gettimeofday() */ -static unsigned long sa1100_gettimeoffset (void) -{ - unsigned long ticks_to_match, elapsed, usec; - - /* Get ticks before next timer match */ - ticks_to_match = OSMR0 - OSCR; - - /* We need elapsed ticks since last match */ - elapsed = LATCH - ticks_to_match; - - /* Now convert them to usec */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH; - - return usec; -} - #ifdef CONFIG_NO_IDLE_HZ static unsigned long initial_match; static int match_posponed; @@ -62,8 +46,6 @@ sa1100_timer_interrupt(int irq, void *dev_id) { unsigned int next_match; - write_seqlock(&xtime_lock); - #ifdef CONFIG_NO_IDLE_HZ if (match_posponed) { match_posponed = 0; @@ -85,8 +67,6 @@ sa1100_timer_interrupt(int irq, void *dev_id) next_match = (OSMR0 += LATCH); } while ((signed long)(next_match - OSCR) <= 0); - write_sequnlock(&xtime_lock); - return IRQ_HANDLED; } @@ -96,6 +76,20 @@ static struct irqaction sa1100_timer_irq = { .handler = sa1100_timer_interrupt, }; +static cycle_t sa1100_read_oscr(void) +{ + return OSCR; +} + +static struct clocksource cksrc_sa1100_oscr = { + .name = "oscr", + .rating = 200, + .read = sa1100_read_oscr, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + static void __init sa1100_timer_init(void) { unsigned long flags; @@ -109,6 +103,11 @@ static void __init sa1100_timer_init(void) OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ OSMR0 = OSCR + LATCH; /* set initial match */ local_irq_restore(flags); + + cksrc_sa1100_oscr.mult = + clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_sa1100_oscr.shift); + + clocksource_register(&cksrc_sa1100_oscr); } #ifdef CONFIG_NO_IDLE_HZ @@ -182,7 +181,6 @@ struct sys_timer sa1100_timer = { .init = sa1100_timer_init, .suspend = sa1100_timer_suspend, .resume = sa1100_timer_resume, - .offset = sa1100_gettimeoffset, #ifdef CONFIG_NO_IDLE_HZ .dyn_tick = &sa1100_dyn_tick, #endif diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index a0545db2a34f..09d9f33d4072 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -82,9 +82,7 @@ static void __init shark_map_io(void) static irqreturn_t shark_timer_interrupt(int irq, void *dev_id) { - write_seqlock(&xtime_lock); timer_tick(); - write_sequnlock(&xtime_lock); return IRQ_HANDLED; } diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 7868f4dc1d00..76348f060f27 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -171,8 +171,8 @@ config CPU_ARM925T # ARM926T config CPU_ARM926T bool "Support ARM926T processor" - depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI - default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI + depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI + default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI select CPU_32v5 select CPU_ABRT_EV5TJ select CPU_CACHE_VIVT @@ -342,11 +342,33 @@ config CPU_XSC3 select CPU_TLB_V4WBI if MMU select IO_36 +# Feroceon +config CPU_FEROCEON + bool + depends on ARCH_ORION + default y + select CPU_32v5 + select CPU_ABRT_EV5T + select CPU_CACHE_VIVT + select CPU_CP15_MMU + select CPU_COPY_V4WB if MMU + select CPU_TLB_V4WBI if MMU + +config CPU_FEROCEON_OLD_ID + bool "Accept early Feroceon cores with an ARM926 ID" + depends on CPU_FEROCEON && !CPU_ARM926T + default y + help + This enables the usage of some old Feroceon cores + for which the CPU ID is equal to the ARM926 ID. + Relevant for Feroceon-1850 and early Feroceon-2850. + # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A default y if ARCH_MX3 + default y if ARCH_MSM7X00A select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 @@ -538,7 +560,7 @@ comment "Processor Features" config ARM_THUMB bool "Support Thumb user binaries" - depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 + depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 || CPU_FEROCEON default y help Say Y if you want to include kernel support for running user space @@ -600,7 +622,7 @@ config CPU_DCACHE_SIZE config CPU_DCACHE_WRITETHROUGH bool "Force write through D-cache" - depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE + depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FEROCEON) && !CPU_DCACHE_DISABLE default y if CPU_ARM925T help Say Y here to use the data cache in writethrough mode. Unless you diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 762702765fc3..44536a0b995a 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_CPU_SA110) += proc-sa110.o obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o +obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o obj-$(CONFIG_CPU_V6) += proc-v6.o obj-$(CONFIG_CPU_V7) += proc-v7.o diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index a8a7dab757eb..28ad7ab1c0cd 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -12,6 +12,7 @@ #include <linux/signal.h> #include <linux/mm.h> #include <linux/init.h> +#include <linux/kprobes.h> #include <asm/system.h> #include <asm/pgtable.h> @@ -20,6 +21,29 @@ #include "fault.h" + +#ifdef CONFIG_KPROBES +static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr) +{ + int ret = 0; + + if (!user_mode(regs)) { + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); + if (kprobe_running() && kprobe_fault_handler(regs, fsr)) + ret = 1; + preempt_enable(); + } + + return ret; +} +#else +static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr) +{ + return 0; +} +#endif + /* * This is useful to dump out the page tables associated with * 'addr' in mm 'mm'. @@ -215,13 +239,16 @@ out: return fault; } -static int +static int __kprobes do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { struct task_struct *tsk; struct mm_struct *mm; int fault, sig, code; + if (notify_page_fault(regs, fsr)) + return 0; + tsk = current; mm = tsk->mm; @@ -311,7 +338,7 @@ no_context: * interrupt or a critical region, and should only copy the information * from the master page table, nothing more. */ -static int +static int __kprobes do_translation_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S new file mode 100644 index 000000000000..fa0dc7e6f0ea --- /dev/null +++ b/arch/arm/mm/proc-feroceon.S @@ -0,0 +1,506 @@ +/* + * linux/arch/arm/mm/proc-feroceon.S: MMU functions for Feroceon + * + * Heavily based on proc-arm926.S + * Maintainer: Assaf Hoffman <hoffman@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/elf.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/ptrace.h> +#include "proc-macros.S" + +/* + * This is the maximum size of an area which will be invalidated + * using the single invalidate entry instructions. Anything larger + * than this, and we go for the whole cache. + * + * This value should be chosen such that we choose the cheapest + * alternative. + */ +#define CACHE_DLIMIT 16384 + +/* + * the cache line size of the I and D cache + */ +#define CACHE_DLINESIZE 32 + + .text +/* + * cpu_feroceon_proc_init() + */ +ENTRY(cpu_feroceon_proc_init) + mov pc, lr + +/* + * cpu_feroceon_proc_fin() + */ +ENTRY(cpu_feroceon_proc_fin) + stmfd sp!, {lr} + mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, ip + bl feroceon_flush_kern_cache_all + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x1000 @ ...i............ + bic r0, r0, #0x000e @ ............wca. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldmfd sp!, {pc} + +/* + * cpu_feroceon_reset(loc) + * + * Perform a soft reset of the system. Put the CPU into the + * same state as it would be if it had been reset, and branch + * to what would be the reset vector. + * + * loc: location to jump to for soft reset + */ + .align 5 +ENTRY(cpu_feroceon_reset) + mov ip, #0 + mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches + mcr p15, 0, ip, c7, c10, 4 @ drain WB +#ifdef CONFIG_MMU + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs +#endif + mrc p15, 0, ip, c1, c0, 0 @ ctrl register + bic ip, ip, #0x000f @ ............wcam + bic ip, ip, #0x1100 @ ...i...s........ + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + mov pc, r0 + +/* + * cpu_feroceon_do_idle() + * + * Called with IRQs disabled + */ + .align 10 +ENTRY(cpu_feroceon_do_idle) + mov r0, #0 + mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer + mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt + mov pc, lr + +/* + * flush_user_cache_all() + * + * Clean and invalidate all cache entries in a particular + * address space. + */ +ENTRY(feroceon_flush_user_cache_all) + /* FALLTHROUGH */ + +/* + * flush_kern_cache_all() + * + * Clean and invalidate the entire cache. + */ +ENTRY(feroceon_flush_kern_cache_all) + mov r2, #VM_EXEC + mov ip, #0 +__flush_whole_cache: +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache +#else +1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate + bne 1b +#endif + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcrne p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * flush_user_cache_range(start, end, flags) + * + * Clean and invalidate a range of cache entries in the + * specified address range. + * + * - start - start address (inclusive) + * - end - end address (exclusive) + * - flags - vm_flags describing address space + */ +ENTRY(feroceon_flush_user_cache_range) + mov ip, #0 + sub r3, r1, r0 @ calculate total size + cmp r3, #CACHE_DLIMIT + bgt __flush_whole_cache +1: tst r2, #VM_EXEC +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE +#else + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry + mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE +#endif + cmp r0, r1 + blo 1b + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(feroceon_coherent_kern_range) + /* FALLTHROUGH */ + +/* + * coherent_user_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(feroceon_coherent_user_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * flush_kern_dcache_page(void *page) + * + * Ensure no D cache aliasing occurs, either with itself or + * the I cache + * + * - addr - page aligned address + */ +ENTRY(feroceon_flush_kern_dcache_page) + add r1, r0, #PAGE_SZ +1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_inv_range(start, end) + * + * Invalidate (discard) the specified virtual address range. + * May not write back any entries. If 'start' or 'end' + * are not cache line aligned, those lines must be written + * back. + * + * - start - virtual start address + * - end - virtual end address + * + * (same as v4wb) + */ +ENTRY(feroceon_dma_inv_range) +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + tst r0, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r0, c7, c10, 1 @ clean D entry + tst r1, #CACHE_DLINESIZE - 1 + mcrne p15, 0, r1, c7, c10, 1 @ clean D entry +#endif + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_clean_range(start, end) + * + * Clean the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + * + * (same as v4wb) + */ +ENTRY(feroceon_dma_clean_range) +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + bic r0, r0, #CACHE_DLINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b +#endif + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* + * dma_flush_range(start, end) + * + * Clean and invalidate the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(feroceon_dma_flush_range) + bic r0, r0, #CACHE_DLINESIZE - 1 +1: +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry +#else + mcr p15, 0, r0, c7, c10, 1 @ clean D entry +#endif + add r0, r0, #CACHE_DLINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +ENTRY(feroceon_cache_fns) + .long feroceon_flush_kern_cache_all + .long feroceon_flush_user_cache_all + .long feroceon_flush_user_cache_range + .long feroceon_coherent_kern_range + .long feroceon_coherent_user_range + .long feroceon_flush_kern_dcache_page + .long feroceon_dma_inv_range + .long feroceon_dma_clean_range + .long feroceon_dma_flush_range + +ENTRY(cpu_feroceon_dcache_clean_area) +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHE_DLINESIZE + subs r1, r1, #CACHE_DLINESIZE + bhi 1b +#endif + mcr p15, 0, r0, c7, c10, 4 @ drain WB + mov pc, lr + +/* =============================== PageTable ============================== */ + +/* + * cpu_feroceon_switch_mm(pgd) + * + * Set the translation base pointer to be as described by pgd. + * + * pgd: new page tables + */ + .align 5 +ENTRY(cpu_feroceon_switch_mm) +#ifdef CONFIG_MMU + mov ip, #0 +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache +#else +@ && 'Clean & Invalidate whole DCache' +1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate + bne 1b +#endif + mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mcr p15, 0, r0, c2, c0, 0 @ load page table pointer + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs +#endif + mov pc, lr + +/* + * cpu_feroceon_set_pte_ext(ptep, pte, ext) + * + * Set a PTE and flush it out + */ + .align 5 +ENTRY(cpu_feroceon_set_pte_ext) +#ifdef CONFIG_MMU + str r1, [r0], #-2048 @ linux version + + eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY + + bic r2, r1, #PTE_SMALL_AP_MASK + bic r2, r2, #PTE_TYPE_MASK + orr r2, r2, #PTE_TYPE_SMALL + + tst r1, #L_PTE_USER @ User? + orrne r2, r2, #PTE_SMALL_AP_URO_SRW + + tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? + orreq r2, r2, #PTE_SMALL_AP_UNO_SRW + + tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? + movne r2, #0 + +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + eor r3, r2, #0x0a @ C & small page? + tst r3, #0x0b + biceq r2, r2, #4 +#endif + str r2, [r0] @ hardware version + mov r0, r0 +#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH + mcr p15, 0, r0, c7, c10, 1 @ clean D entry +#endif + mcr p15, 0, r0, c7, c10, 4 @ drain WB +#endif + mov pc, lr + + __INIT + + .type __feroceon_setup, #function +__feroceon_setup: + mov r0, #0 + mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 +#ifdef CONFIG_MMU + mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 +#endif + + +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mov r0, #4 @ disable write-back on caches explicitly + mcr p15, 7, r0, c15, c0, 0 +#endif + + adr r5, feroceon_crval + ldmia r5, {r5, r6} + mrc p15, 0, r0, c1, c0 @ get control register v4 + bic r0, r0, r5 + orr r0, r0, r6 +#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN + orr r0, r0, #0x4000 @ .1.. .... .... .... +#endif + mov pc, lr + .size __feroceon_setup, . - __feroceon_setup + + /* + * R + * .RVI ZFRS BLDP WCAM + * .011 0001 ..11 0101 + * + */ + .type feroceon_crval, #object +feroceon_crval: + crval clear=0x00007f3f, mmuset=0x00003135, ucset=0x00001134 + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type feroceon_processor_functions, #object +feroceon_processor_functions: + .word v5t_early_abort + .word cpu_feroceon_proc_init + .word cpu_feroceon_proc_fin + .word cpu_feroceon_reset + .word cpu_feroceon_do_idle + .word cpu_feroceon_dcache_clean_area + .word cpu_feroceon_switch_mm + .word cpu_feroceon_set_pte_ext + .size feroceon_processor_functions, . - feroceon_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv5te" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v5" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_feroceon_name, #object +cpu_feroceon_name: + .asciz "Feroceon" + .size cpu_feroceon_name, . - cpu_feroceon_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + +#ifdef CONFIG_CPU_FEROCEON_OLD_ID + .type __feroceon_old_id_proc_info,#object +__feroceon_old_id_proc_info: + .long 0x41069260 + .long 0xfffffff0 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + .long PMD_TYPE_SECT | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __feroceon_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_feroceon_name + .long feroceon_processor_functions + .long v4wbi_tlb_fns + .long v4wb_user_fns + .long feroceon_cache_fns + .size __feroceon_old_id_proc_info, . - __feroceon_old_id_proc_info +#endif + + .type __feroceon_proc_info,#object +__feroceon_proc_info: + .long 0x56055310 + .long 0xfffffff0 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + .long PMD_TYPE_SECT | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __feroceon_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_feroceon_name + .long feroceon_processor_functions + .long v4wbi_tlb_fns + .long v4wb_user_fns + .long feroceon_cache_fns + .size __feroceon_proc_info, . - __feroceon_proc_info diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 83a5f8b91857..f455233af082 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -29,7 +29,7 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 0360b1f14d11..45a77df668f1 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -212,7 +212,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox) static irqreturn_t mbox_interrupt(int irq, void *p) { - struct omap_mbox *mbox = (struct omap_mbox *)p; + struct omap_mbox *mbox = p; if (is_mbox_irq(mbox, IRQ_TX)) __mbox_tx_interrupt(mbox); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index f7b9ccdaacbc..2af5bd5a1344 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -98,9 +98,10 @@ static void omap_mcbsp_dump_reg(u8 id) static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) { - struct omap_mcbsp * mcbsp_tx = (struct omap_mcbsp *)(dev_id); + struct omap_mcbsp *mcbsp_tx = dev_id; - DBG("TX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2)); + DBG("TX IRQ callback : 0x%x\n", + OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2)); complete(&mcbsp_tx->tx_irq_completion); return IRQ_HANDLED; @@ -108,9 +109,10 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) { - struct omap_mcbsp * mcbsp_rx = (struct omap_mcbsp *)(dev_id); + struct omap_mcbsp *mcbsp_rx = dev_id; - DBG("RX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2)); + DBG("RX IRQ callback : 0x%x\n", + OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2)); complete(&mcbsp_rx->rx_irq_completion); return IRQ_HANDLED; @@ -118,9 +120,10 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data) { - struct omap_mcbsp * mcbsp_dma_tx = (struct omap_mcbsp *)(data); + struct omap_mcbsp *mcbsp_dma_tx = data; - DBG("TX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2)); + DBG("TX DMA callback : 0x%x\n", + OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2)); /* We can free the channels */ omap_free_dma(mcbsp_dma_tx->dma_tx_lch); @@ -131,9 +134,10 @@ static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data) static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data) { - struct omap_mcbsp * mcbsp_dma_rx = (struct omap_mcbsp *)(data); + struct omap_mcbsp *mcbsp_dma_rx = data; - DBG("RX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2)); + DBG("RX DMA callback : 0x%x\n", + OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2)); /* We can free the channels */ omap_free_dma(mcbsp_dma_rx->dma_rx_lch); diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 8e5ccaa1f03c..131d20237dd7 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -23,6 +23,7 @@ obj-y += clock.o obj-$(CONFIG_CPU_S3C244X) += s3c244x.o obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += sleep.o diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c index 79cda0faec86..99a44746f8f2 100644 --- a/arch/arm/plat-s3c24xx/clock.c +++ b/arch/arm/plat-s3c24xx/clock.c @@ -172,6 +172,15 @@ int clk_set_rate(struct clk *clk, unsigned long rate) if (IS_ERR(clk)) return -EINVAL; + /* We do not default just do a clk->rate = rate as + * the clock may have been made this way by choice. + */ + + WARN_ON(clk->set_rate == NULL); + + if (clk->set_rate == NULL) + return -EINVAL; + mutex_lock(&clocks_mutex); ret = (clk->set_rate)(clk, rate); mutex_unlock(&clocks_mutex); @@ -213,6 +222,12 @@ EXPORT_SYMBOL(clk_set_parent); /* base clocks */ +static int clk_default_setrate(struct clk *clk, unsigned long rate) +{ + clk->rate = rate; + return 0; +} + struct clk clk_xtal = { .name = "xtal", .id = -1, @@ -224,6 +239,7 @@ struct clk clk_xtal = { struct clk clk_mpll = { .name = "mpll", .id = -1, + .set_rate = clk_default_setrate, }; struct clk clk_upll = { @@ -239,6 +255,7 @@ struct clk clk_f = { .rate = 0, .parent = &clk_mpll, .ctrlbit = 0, + .set_rate = clk_default_setrate, }; struct clk clk_h = { @@ -247,6 +264,7 @@ struct clk clk_h = { .rate = 0, .parent = NULL, .ctrlbit = 0, + .set_rate = clk_default_setrate, }; struct clk clk_p = { @@ -255,6 +273,7 @@ struct clk clk_p = { .rate = 0, .parent = NULL, .ctrlbit = 0, + .set_rate = clk_default_setrate, }; struct clk clk_usb_bus = { diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index aae1b9cbaf44..ac9ff1666fcc 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -525,7 +525,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, } } else if (chan->state == S3C2410_DMA_IDLE) { if (chan->flags & S3C2410_DMAF_AUTOSTART) { - s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START); + s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, + S3C2410_DMAOP_START); } } @@ -787,7 +788,7 @@ int s3c2410_dma_request(unsigned int channel, pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan); - return 0; + return chan->number | DMACH_LOW_LEVEL; } EXPORT_SYMBOL(s3c2410_dma_request); @@ -1173,6 +1174,7 @@ int s3c2410_dma_devconfig(int channel, chan->source = source; chan->dev_addr = devaddr; + chan->hw_cfg = hwcfg; switch (source) { case S3C2410_DMASRC_HW: @@ -1184,7 +1186,7 @@ int s3c2410_dma_devconfig(int channel, dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0)); chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST); - return 0; + break; case S3C2410_DMASRC_MEM: /* source is memory */ @@ -1195,11 +1197,19 @@ int s3c2410_dma_devconfig(int channel, dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3); chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC); - return 0; + break; + + default: + printk(KERN_ERR "dma%d: invalid source type (%d)\n", + channel, source); + + return -EINVAL; } - printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source); - return -EINVAL; + if (dma_sel.direction != NULL) + (dma_sel.direction)(chan, chan->map, source); + + return 0; } EXPORT_SYMBOL(s3c2410_dma_devconfig); @@ -1227,6 +1237,10 @@ int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst) EXPORT_SYMBOL(s3c2410_dma_getposition); +static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) +{ + return container_of(dev, struct s3c2410_dma_chan, dev); +} /* system device class */ @@ -1234,7 +1248,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition); static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state) { - struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev); + struct s3c2410_dma_chan *cp = to_dma_chan(dev); printk(KERN_DEBUG "suspending dma channel %d\n", cp->number); @@ -1256,6 +1270,24 @@ static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state) static int s3c2410_dma_resume(struct sys_device *dev) { + struct s3c2410_dma_chan *cp = to_dma_chan(dev); + unsigned int no = cp->number | DMACH_LOW_LEVEL; + + /* restore channel's hardware configuration */ + + if (!cp->in_use) + return 0; + + printk(KERN_INFO "dma%d: restoring configuration\n", cp->number); + + s3c2410_dma_config(no, cp->xfer_unit, cp->dcon); + s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr); + + /* re-select the dma source for this channel */ + + if (cp->map != NULL) + dma_sel.select(cp, cp->map); + return 0; } @@ -1445,6 +1477,7 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) found: dmach = &s3c2410_chans[ch]; + dmach->map = ch_map; dma_chan_map[channel] = dmach; /* select the channel */ diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index ec3a09c4d181..ee99dcc7f0bd 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -122,6 +122,19 @@ void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) EXPORT_SYMBOL(s3c2410_gpio_pullup); +int s3c2410_gpio_getpull(unsigned int pin) +{ + void __iomem *base = S3C24XX_GPIO_BASE(pin); + unsigned long offs = S3C2410_GPIO_OFFSET(pin); + + if (pin < S3C2410_GPIO_BANKB) + return -EINVAL; + + return (__raw_readl(base + 0x08) & (1L << offs)) ? 1 : 0; +} + +EXPORT_SYMBOL(s3c2410_gpio_getpull); + void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) { void __iomem *base = S3C24XX_GPIO_BASE(pin); @@ -186,3 +199,19 @@ int s3c2410_gpio_getirq(unsigned int pin) } EXPORT_SYMBOL(s3c2410_gpio_getirq); + +int s3c2410_gpio_irq2pin(unsigned int irq) +{ + if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3) + return S3C2410_GPF0 + (irq - IRQ_EINT0); + + if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7) + return S3C2410_GPF4 + (irq - IRQ_EINT4); + + if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23) + return S3C2410_GPG0 + (irq - IRQ_EINT8); + + return -EINVAL; +} + +EXPORT_SYMBOL(s3c2410_gpio_irq2pin); diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 8fbc88470261..d486f5112569 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -187,7 +187,7 @@ struct irq_chip s3c_irq_level_chip = { .set_wake = s3c_irq_wake }; -static struct irq_chip s3c_irq_chip = { +struct irq_chip s3c_irq_chip = { .name = "s3c", .ack = s3c_irq_ack, .mask = s3c_irq_mask, diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 4fdb3117744f..bf5581a9aeea 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -83,38 +83,39 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_REFRESH), }; -static struct sleep_save gpio_save[] = { - SAVE_ITEM(S3C2410_GPACON), - SAVE_ITEM(S3C2410_GPADAT), - - SAVE_ITEM(S3C2410_GPBCON), - SAVE_ITEM(S3C2410_GPBDAT), - SAVE_ITEM(S3C2410_GPBUP), - - SAVE_ITEM(S3C2410_GPCCON), - SAVE_ITEM(S3C2410_GPCDAT), - SAVE_ITEM(S3C2410_GPCUP), - - SAVE_ITEM(S3C2410_GPDCON), - SAVE_ITEM(S3C2410_GPDDAT), - SAVE_ITEM(S3C2410_GPDUP), - - SAVE_ITEM(S3C2410_GPECON), - SAVE_ITEM(S3C2410_GPEDAT), - SAVE_ITEM(S3C2410_GPEUP), - - SAVE_ITEM(S3C2410_GPFCON), - SAVE_ITEM(S3C2410_GPFDAT), - SAVE_ITEM(S3C2410_GPFUP), - - SAVE_ITEM(S3C2410_GPGCON), - SAVE_ITEM(S3C2410_GPGDAT), - SAVE_ITEM(S3C2410_GPGUP), - - SAVE_ITEM(S3C2410_GPHCON), - SAVE_ITEM(S3C2410_GPHDAT), - SAVE_ITEM(S3C2410_GPHUP), +static struct gpio_sleep { + void __iomem *base; + unsigned int gpcon; + unsigned int gpdat; + unsigned int gpup; +} gpio_save[] = { + [0] = { + .base = S3C2410_GPACON, + }, + [1] = { + .base = S3C2410_GPBCON, + }, + [2] = { + .base = S3C2410_GPCCON, + }, + [3] = { + .base = S3C2410_GPDCON, + }, + [4] = { + .base = S3C2410_GPECON, + }, + [5] = { + .base = S3C2410_GPFCON, + }, + [6] = { + .base = S3C2410_GPGCON, + }, + [7] = { + .base = S3C2410_GPHCON, + }, +}; +static struct sleep_save misc_save[] = { SAVE_ITEM(S3C2410_DCLKCON), }; @@ -486,6 +487,184 @@ static void s3c2410_pm_configure_extint(void) } } +/* offsets for CON/DAT/UP registers */ + +#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON) +#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON) +#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON) + +/* s3c2410_pm_save_gpios() + * + * Save the state of the GPIOs + */ + +static void s3c2410_pm_save_gpios(void) +{ + struct gpio_sleep *gps = gpio_save; + unsigned int gpio; + + for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) { + void __iomem *base = gps->base; + + gps->gpcon = __raw_readl(base + OFFS_CON); + gps->gpdat = __raw_readl(base + OFFS_DAT); + + if (gpio > 0) + gps->gpup = __raw_readl(base + OFFS_UP); + + } +} + +/* Test whether the given masked+shifted bits of an GPIO configuration + * are one of the SFN (special function) modes. */ + +static inline int is_sfn(unsigned long con) +{ + return (con == 2 || con == 3); +} + +/* Test if the given masked+shifted GPIO configuration is an input */ + +static inline int is_in(unsigned long con) +{ + return con == 0; +} + +/* Test if the given masked+shifted GPIO configuration is an output */ + +static inline int is_out(unsigned long con) +{ + return con == 1; +} + +/* s3c2410_pm_restore_gpio() + * + * Restore one of the GPIO banks that was saved during suspend. This is + * not as simple as once thought, due to the possibility of glitches + * from the order that the CON and DAT registers are set in. + * + * The three states the pin can be are {IN,OUT,SFN} which gives us 9 + * combinations of changes to check. Three of these, if the pin stays + * in the same configuration can be discounted. This leaves us with + * the following: + * + * { IN => OUT } Change DAT first + * { IN => SFN } Change CON first + * { OUT => SFN } Change CON first, so new data will not glitch + * { OUT => IN } Change CON first, so new data will not glitch + * { SFN => IN } Change CON first + * { SFN => OUT } Change DAT first, so new data will not glitch [1] + * + * We do not currently deal with the UP registers as these control + * weak resistors, so a small delay in change should not need to bring + * these into the calculations. + * + * [1] this assumes that writing to a pin DAT whilst in SFN will set the + * state for when it is next output. + */ + +static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps) +{ + void __iomem *base = gps->base; + unsigned long gps_gpcon = gps->gpcon; + unsigned long gps_gpdat = gps->gpdat; + unsigned long old_gpcon; + unsigned long old_gpdat; + unsigned long old_gpup = 0x0; + unsigned long gpcon; + int nr; + + old_gpcon = __raw_readl(base + OFFS_CON); + old_gpdat = __raw_readl(base + OFFS_DAT); + + if (base == S3C2410_GPACON) { + /* GPACON only has one bit per control / data and no PULLUPs. + * GPACON[x] = 0 => Output, 1 => SFN */ + + /* first set all SFN bits to SFN */ + + gpcon = old_gpcon | gps->gpcon; + __raw_writel(gpcon, base + OFFS_CON); + + /* now set all the other bits */ + + __raw_writel(gps_gpdat, base + OFFS_DAT); + __raw_writel(gps_gpcon, base + OFFS_CON); + } else { + unsigned long old, new, mask; + unsigned long change_mask = 0x0; + + old_gpup = __raw_readl(base + OFFS_UP); + + /* Create a change_mask of all the items that need to have + * their CON value changed before their DAT value, so that + * we minimise the work between the two settings. + */ + + for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) { + old = (old_gpcon & mask) >> nr; + new = (gps_gpcon & mask) >> nr; + + /* If there is no change, then skip */ + + if (old == new) + continue; + + /* If both are special function, then skip */ + + if (is_sfn(old) && is_sfn(new)) + continue; + + /* Change is IN => OUT, do not change now */ + + if (is_in(old) && is_out(new)) + continue; + + /* Change is SFN => OUT, do not change now */ + + if (is_sfn(old) && is_out(new)) + continue; + + /* We should now be at the case of IN=>SFN, + * OUT=>SFN, OUT=>IN, SFN=>IN. */ + + change_mask |= mask; + } + + /* Write the new CON settings */ + + gpcon = old_gpcon & ~change_mask; + gpcon |= gps_gpcon & change_mask; + + __raw_writel(gpcon, base + OFFS_CON); + + /* Now change any items that require DAT,CON */ + + __raw_writel(gps_gpdat, base + OFFS_DAT); + __raw_writel(gps_gpcon, base + OFFS_CON); + __raw_writel(gps->gpup, base + OFFS_UP); + } + + DBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n", + index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); +} + + +/** s3c2410_pm_restore_gpios() + * + * Restore the state of the GPIOs + */ + +static void s3c2410_pm_restore_gpios(void) +{ + struct gpio_sleep *gps = gpio_save; + int gpio; + + for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) { + s3c2410_pm_restore_gpio(gpio, gps); + } +} + void (*pm_cpu_prep)(void); void (*pm_cpu_sleep)(void); @@ -535,7 +714,8 @@ static int s3c2410_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ - s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save)); + s3c2410_pm_save_gpios(); + s3c2410_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); @@ -585,8 +765,9 @@ static int s3c2410_pm_enter(suspend_state_t state) /* restore the system state */ s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save)); + s3c2410_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); + s3c2410_pm_restore_gpios(); s3c2410_pm_debug_init(); diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c new file mode 100644 index 000000000000..faf3e0f9f4e2 --- /dev/null +++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c @@ -0,0 +1,137 @@ +/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c + * + * Copyright (c) 2004-2005,2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2440/S3C2442 Common clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/device.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/mutex.h> +#include <linux/clk.h> + +#include <asm/hardware.h> +#include <asm/atomic.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/arch/regs-clock.h> + +#include <asm/plat-s3c24xx/clock.h> +#include <asm/plat-s3c24xx/cpu.h> + +static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) +{ + unsigned long camdivn; + unsigned long dvs; + + if (parent == &clk_f) + dvs = 0; + else if (parent == &clk_h) + dvs = S3C2440_CAMDIVN_DVSEN; + else + return -EINVAL; + + clk->parent = parent; + + camdivn = __raw_readl(S3C2440_CAMDIVN); + camdivn &= ~S3C2440_CAMDIVN_DVSEN; + camdivn |= dvs; + __raw_writel(camdivn, S3C2440_CAMDIVN); + + return 0; +} + +static struct clk clk_arm = { + .name = "armclk", + .id = -1, + .set_parent = s3c2440_setparent_armclk, +}; + +static int s3c244x_clk_add(struct sys_device *sysdev) +{ + unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); + unsigned long clkdivn; + struct clk *clock_upll; + int ret; + + printk("S3C244X: Clock Support, DVS %s\n", + (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); + + clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f; + + ret = s3c24xx_register_clock(&clk_arm); + if (ret < 0) { + printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret); + return ret; + } + + clock_upll = clk_get(NULL, "upll"); + if (IS_ERR(clock_upll)) { + printk(KERN_ERR "S3C244X: Failed to get upll clock\n"); + return -ENOENT; + } + + /* check rate of UPLL, and if it is near 96MHz, then change + * to using half the UPLL rate for the system */ + + if (clk_get_rate(clock_upll) > (94 * MHZ)) { + clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; + + mutex_lock(&clocks_mutex); + + clkdivn = __raw_readl(S3C2410_CLKDIVN); + clkdivn |= S3C2440_CLKDIVN_UCLK; + __raw_writel(clkdivn, S3C2410_CLKDIVN); + + mutex_unlock(&clocks_mutex); + } + + return 0; +} + +static struct sysdev_driver s3c2440_clk_driver = { + .add = s3c244x_clk_add, +}; + +static int s3c2440_clk_init(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver); +} + +arch_initcall(s3c2440_clk_init); + +static struct sysdev_driver s3c2442_clk_driver = { + .add = s3c244x_clk_add, +}; + +static int s3c2442_clk_init(void) +{ + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver); +} + +arch_initcall(s3c2442_clk_init); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 0a9a5e7f62e5..7ed58c0c24c2 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Fri May 11 19:53:41 2007 +# Last update: Sat Jan 26 14:45:34 2008 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -266,7 +266,7 @@ stork_egg ARCH_STORK_EGG STORK_EGG 248 wismo SA1100_WISMO WISMO 249 ezlinx ARCH_EZLINX EZLINX 250 at91rm9200 ARCH_AT91RM9200 AT91RM9200 251 -orion ARCH_ORION ORION 252 +adtech_orion ARCH_ADTECH_ORION ADTECH_ORION 252 neptune ARCH_NEPTUNE NEPTUNE 253 hackkit SA1100_HACKKIT HACKKIT 254 pxa_wins30 ARCH_PXA_WINS30 PXA_WINS30 255 @@ -661,7 +661,6 @@ a9200ec MACH_A9200EC A9200EC 645 pnx0105 MACH_PNX0105 PNX0105 646 adcpoecpu MACH_ADCPOECPU ADCPOECPU 647 csb637 MACH_CSB637 CSB637 648 -ml69q6203 MACH_ML69Q6203 ML69Q6203 649 mb9200 MACH_MB9200 MB9200 650 kulun MACH_KULUN KULUN 651 snapper MACH_SNAPPER SNAPPER 652 @@ -953,7 +952,6 @@ fred_jack MACH_FRED_JACK FRED_JACK 939 ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940 nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941 netdcu8 MACH_NETDCU8 NETDCU8 942 -ml675050_cpu_boa MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943 ng_fvx538 MACH_NG_FVX538 NG_FVX538 944 ng_fvs338 MACH_NG_FVS338 NG_FVS338 945 pnx4103 MACH_PNX4103 PNX4103 946 @@ -1148,7 +1146,7 @@ aidx270 MACH_AIDX270 AIDX270 1134 rema MACH_REMA REMA 1135 bps1000 MACH_BPS1000 BPS1000 1136 hw90350 MACH_HW90350 HW90350 1137 -omap_sdp3430 MACH_OMAP_SDP3430 OMAP_SDP3430 1138 +omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138 bluetouch MACH_BLUETOUCH BLUETOUCH 1139 vstms MACH_VSTMS VSTMS 1140 xsbase270 MACH_XSBASE270 XSBASE270 1141 @@ -1214,7 +1212,7 @@ osstbox MACH_OSSTBOX OSSTBOX 1203 kbat9261 MACH_KBAT9261 KBAT9261 1204 ct1100 MACH_CT1100 CT1100 1205 akcppxa MACH_AKCPPXA AKCPPXA 1206 -zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207 +ochaya1020 MACH_OCHAYA1020 OCHAYA1020 1207 hitrack MACH_HITRACK HITRACK 1208 syme1 MACH_SYME1 SYME1 1209 syhl1 MACH_SYHL1 SYHL1 1210 @@ -1299,7 +1297,7 @@ xp179 MACH_XP179 XP179 1290 h4300 MACH_H4300 H4300 1291 goramo_mlr MACH_GORAMO_MLR GORAMO_MLR 1292 mxc30020evb MACH_MXC30020EVB MXC30020EVB 1293 -adsbitsymx MACH_ADSBITSIMX ADSBITSIMX 1294 +adsbitsyg5 MACH_ADSBITSYG5 ADSBITSYG5 1294 adsportalplus MACH_ADSPORTALPLUS ADSPORTALPLUS 1295 mmsp2plus MACH_MMSP2PLUS MMSP2PLUS 1296 em_x270 MACH_EM_X270 EM_X270 1297 @@ -1367,3 +1365,249 @@ db88f5281 MACH_DB88F5281 DB88F5281 1358 csb726 MACH_CSB726 CSB726 1359 tik27 MACH_TIK27 TIK27 1360 mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361 +rirm3 MACH_RIRM3 RIRM3 1362 +pelco_odyssey MACH_PELCO_ODYSSEY PELCO_ODYSSEY 1363 +adx_abox MACH_ADX_ABOX ADX_ABOX 1365 +adx_tpid MACH_ADX_TPID ADX_TPID 1366 +minicheck MACH_MINICHECK MINICHECK 1367 +idam MACH_IDAM IDAM 1368 +mario_mx MACH_MARIO_MX MARIO_MX 1369 +vi1888 MACH_VI1888 VI1888 1370 +zr4230 MACH_ZR4230 ZR4230 1371 +t1_ix_blue MACH_T1_IX_BLUE T1_IX_BLUE 1372 +syhq2 MACH_SYHQ2 SYHQ2 1373 +computime_r3 MACH_COMPUTIME_R3 COMPUTIME_R3 1374 +oratis MACH_ORATIS ORATIS 1375 +mikko MACH_MIKKO MIKKO 1376 +holon MACH_HOLON HOLON 1377 +olip8 MACH_OLIP8 OLIP8 1378 +ghi270hg MACH_GHI270HG GHI270HG 1379 +davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380 +davinci_dm355_evm MACH_DAVINCI_DM350_EVM DAVINCI_DM350_EVM 1381 +blackriver MACH_BLACKRIVER BLACKRIVER 1383 +sandgate_wp MACH_SANDGATEWP SANDGATEWP 1384 +cdotbwsg MACH_CDOTBWSG CDOTBWSG 1385 +quark963 MACH_QUARK963 QUARK963 1386 +csb735 MACH_CSB735 CSB735 1387 +littleton MACH_LITTLETON LITTLETON 1388 +mio_p550 MACH_MIO_P550 MIO_P550 1389 +motion2440 MACH_MOTION2440 MOTION2440 1390 +imm500 MACH_IMM500 IMM500 1391 +homematic MACH_HOMEMATIC HOMEMATIC 1392 +ermine MACH_ERMINE ERMINE 1393 +kb9202b MACH_KB9202B KB9202B 1394 +hs1xx MACH_HS1XX HS1XX 1395 +studentmate2440 MACH_STUDENTMATE2440 STUDENTMATE2440 1396 +arvoo_l1_z1 MACH_ARVOO_L1_Z1 ARVOO_L1_Z1 1397 +dep2410k MACH_DEP2410K DEP2410K 1398 +xxsvideo MACH_XXSVIDEO XXSVIDEO 1399 +im4004 MACH_IM4004 IM4004 1400 +ochaya1050 MACH_OCHAYA1050 OCHAYA1050 1401 +lep9261 MACH_LEP9261 LEP9261 1402 +svenmeb MACH_SVENMEB SVENMEB 1403 +fortunet2ne MACH_FORTUNET2NE FORTUNET2NE 1404 +nxhx MACH_NXHX NXHX 1406 +realview_pb11mp MACH_REALVIEW_PB11MP REALVIEW_PB11MP 1407 +ids500 MACH_IDS500 IDS500 1408 +ors_n725 MACH_ORS_N725 ORS_N725 1409 +hsdarm MACH_HSDARM HSDARM 1410 +sha_pon003 MACH_SHA_PON003 SHA_PON003 1411 +sha_pon004 MACH_SHA_PON004 SHA_PON004 1412 +sha_pon007 MACH_SHA_PON007 SHA_PON007 1413 +sha_pon011 MACH_SHA_PON011 SHA_PON011 1414 +h6042 MACH_H6042 H6042 1415 +h6043 MACH_H6043 H6043 1416 +looxc550 MACH_LOOXC550 LOOXC550 1417 +cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418 +app3xx MACH_APP3XX APP3XX 1419 +sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420 +xscale_palmt700p MACH_XSCALE_PALMT700P XSCALE_PALMT700P 1421 +xscale_palmt700w MACH_XSCALE_PALMT700W XSCALE_PALMT700W 1422 +xscale_palmt750 MACH_XSCALE_PALMT750 XSCALE_PALMT750 1423 +xscale_palmt755p MACH_XSCALE_PALMT755P XSCALE_PALMT755P 1424 +ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425 +sarge MACH_SARGE SARGE 1426 +a696 MACH_A696 A696 1427 +turtle1916 MACH_TURTLE TURTLE 1428 +mx27_3ds MACH_MX27_3DS MX27_3DS 1430 +bishop MACH_BISHOP BISHOP 1431 +pxx MACH_PXX PXX 1432 +redwood MACH_REDWOOD REDWOOD 1433 +omap_2430dlp MACH_OMAP_2430DLP OMAP_2430DLP 1436 +omap_2430osk MACH_OMAP_2430OSK OMAP_2430OSK 1437 +sardine MACH_SARDINE SARDINE 1438 +halibut MACH_HALIBUT HALIBUT 1439 +trout MACH_TROUT TROUT 1440 +goldfish MACH_GOLDFISH GOLDFISH 1441 +gesbc2440 MACH_GESBC2440 GESBC2440 1442 +nomad MACH_NOMAD NOMAD 1443 +rosalind MACH_ROSALIND ROSALIND 1444 +cc9p9215 MACH_CC9P9215 CC9P9215 1445 +cc9p9210 MACH_CC9P9210 CC9P9210 1446 +cc9p9215js MACH_CC9P9215JS CC9P9215JS 1447 +cc9p9210js MACH_CC9P9210JS CC9P9210JS 1448 +nasffe MACH_NASFFE NASFFE 1449 +tn2x0bd MACH_TN2X0BD TN2X0BD 1450 +gwmpxa MACH_GWMPXA GWMPXA 1451 +exyplus MACH_EXYPLUS EXYPLUS 1452 +jadoo21 MACH_JADOO21 JADOO21 1453 +looxn560 MACH_LOOXN560 LOOXN560 1454 +bonsai MACH_BONSAI BONSAI 1455 +adsmilgato MACH_ADSMILGATO ADSMILGATO 1456 +gba MACH_GBA GBA 1457 +h6044 MACH_H6044 H6044 1458 +app MACH_APP APP 1459 +tct_hammer MACH_TCT_HAMMER TCT_HAMMER 1460 +herald MACH_HERMES HERMES 1461 +artemis MACH_ARTEMIS ARTEMIS 1462 +htctitan MACH_HTCTITAN HTCTITAN 1463 +qranium MACH_QRANIUM QRANIUM 1464 +adx_wsc2 MACH_ADX_WSC2 ADX_WSC2 1465 +adx_medinet MACH_ADX_MEDINET ADX_MEDINET 1466 +bboard MACH_BBOARD BBOARD 1467 +cambria MACH_CAMBRIA CAMBRIA 1468 +mt7xxx MACH_MT7XXX MT7XXX 1469 +matrix512 MACH_MATRIX512 MATRIX512 1470 +matrix522 MACH_MATRIX522 MATRIX522 1471 +ipac5010 MACH_IPAC5010 IPAC5010 1472 +sakura MACH_SAKURA SAKURA 1473 +grocx MACH_GROCX GROCX 1474 +pm9263 MACH_PM9263 PM9263 1475 +sim_one MACH_SIM_ONE SIM_ONE 1476 +acq132 MACH_ACQ132 ACQ132 1477 +datr MACH_DATR DATR 1478 +actux1 MACH_ACTUX1 ACTUX1 1479 +actux2 MACH_ACTUX2 ACTUX2 1480 +actux3 MACH_ACTUX3 ACTUX3 1481 +flexit MACH_FLEXIT FLEXIT 1482 +bh2x0bd MACH_BH2X0BD BH2X0BD 1483 +atb2002 MACH_ATB2002 ATB2002 1484 +xenon MACH_XENON XENON 1485 +fm607 MACH_FM607 FM607 1486 +matrix514 MACH_MATRIX514 MATRIX514 1487 +matrix524 MACH_MATRIX524 MATRIX524 1488 +inpod MACH_INPOD INPOD 1489 +jive MACH_JIVE JIVE 1490 +tll_mx21 MACH_TLL_MX21 TLL_MX21 1491 +sbc2800 MACH_SBC2800 SBC2800 1492 +cc7ucamry MACH_CC7UCAMRY CC7UCAMRY 1493 +ubisys_p9_sc15 MACH_UBISYS_P9_SC15 UBISYS_P9_SC15 1494 +ubisys_p9_ssc2d10 MACH_UBISYS_P9_SSC2D10 UBISYS_P9_SSC2D10 1495 +ubisys_p9_rcu3 MACH_UBISYS_P9_RCU3 UBISYS_P9_RCU3 1496 +aml_m8000 MACH_AML_M8000 AML_M8000 1497 +snapper_270 MACH_SNAPPER_270 SNAPPER_270 1498 +omap_bbx MACH_OMAP_BBX OMAP_BBX 1499 +ucn2410 MACH_UCN2410 UCN2410 1500 +sam9_l9260 MACH_SAM9_L9260 SAM9_L9260 1501 +eti_c2 MACH_ETI_C2 ETI_C2 1502 +avalanche MACH_AVALANCHE AVALANCHE 1503 +realview_pb1176 MACH_REALVIEW_PB1176 REALVIEW_PB1176 1504 +dp1500 MACH_DP1500 DP1500 1505 +apple_iphone MACH_APPLE_IPHONE APPLE_IPHONE 1506 +yl9200 MACH_YL9200 YL9200 1507 +rd88f5182 MACH_RD88F5182 RD88F5182 1508 +kurobox_pro MACH_KUROBOX_PRO KUROBOX_PRO 1509 +se_poet MACH_SE_POET SE_POET 1510 +mx31_3ds MACH_MX31_3DS MX31_3DS 1511 +r270 MACH_R270 R270 1512 +armour21 MACH_ARMOUR21 ARMOUR21 1513 +dt2 MACH_DT2 DT2 1514 +vt4 MACH_VT4 VT4 1515 +tyco320 MACH_TYCO320 TYCO320 1516 +adma MACH_ADMA ADMA 1517 +wp188 MACH_WP188 WP188 1518 +corsica MACH_CORSICA CORSICA 1519 +bigeye MACH_BIGEYE BIGEYE 1520 +tll5000 MACH_TLL5000 TLL5000 1522 +hni270 MACH_HNI_X270 HNI_X270 1523 +qong MACH_QONG QONG 1524 +tcompact MACH_TCOMPACT TCOMPACT 1525 +puma5 MACH_PUMA5 PUMA5 1526 +elara MACH_ELARA ELARA 1527 +ellington MACH_ELLINGTON ELLINGTON 1528 +xda_atom MACH_XDA_ATOM XDA_ATOM 1529 +energizer2 MACH_ENERGIZER2 ENERGIZER2 1530 +odin MACH_ODIN ODIN 1531 +actux4 MACH_ACTUX4 ACTUX4 1532 +esl_omap MACH_ESL_OMAP ESL_OMAP 1533 +omap2evm MACH_OMAP2EVM OMAP2EVM 1534 +omap3evm MACH_OMAP3EVM OMAP3EVM 1535 +adx_pcu57 MACH_ADX_PCU57 ADX_PCU57 1536 +monaco MACH_MONACO MONACO 1537 +levante MACH_LEVANTE LEVANTE 1538 +tmxipx425 MACH_TMXIPX425 TMXIPX425 1539 +leep MACH_LEEP LEEP 1540 +raad MACH_RAAD RAAD 1541 +dns323 MACH_DNS323 DNS323 1542 +ap1000 MACH_AP1000 AP1000 1543 +a9sam6432 MACH_A9SAM6432 A9SAM6432 1544 +shiny MACH_SHINY SHINY 1545 +omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546 +csr_bdb2 MACH_CSR_BDB2 CSR_BDB2 1547 +nokia_n810 MACH_NOKIA_N810 NOKIA_N810 1548 +c270 MACH_C270 C270 1549 +sentry MACH_SENTRY SENTRY 1550 +pcm038 MACH_PCM038 PCM038 1551 +anc300 MACH_ANC300 ANC300 1552 +htckaiser MACH_HTCKAISER HTCKAISER 1553 +sbat100 MACH_SBAT100 SBAT100 1554 +modunorm MACH_MODUNORM MODUNORM 1555 +pelos_twarm MACH_PELOS_TWARM PELOS_TWARM 1556 +flank MACH_FLANK FLANK 1557 +sirloin MACH_SIRLOIN SIRLOIN 1558 +brisket MACH_BRISKET BRISKET 1559 +chuck MACH_CHUCK CHUCK 1560 +otter MACH_OTTER OTTER 1561 +davinci_ldk MACH_DAVINCI_LDK DAVINCI_LDK 1562 +phreedom MACH_PHREEDOM PHREEDOM 1563 +sg310 MACH_SG310 SG310 1564 +ts_x09 MACH_TS209 TS209 1565 +at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566 +tion9315 MACH_TION9315 TION9315 1567 +mast MACH_MAST MAST 1568 +pfw MACH_PFW PFW 1569 +yl_p2440 MACH_YL_P2440 YL_P2440 1570 +zsbc32 MACH_ZSBC32 ZSBC32 1571 +omap_pace2 MACH_OMAP_PACE2 OMAP_PACE2 1572 +imx_pace2 MACH_IMX_PACE2 IMX_PACE2 1573 +mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574 +mx37_3ds MACH_MX37_3DS MX37_3DS 1575 +rcc MACH_RCC RCC 1576 +dmp MACH_ARM9 ARM9 1577 +vision_ep9307 MACH_VISION_EP9307 VISION_EP9307 1578 +scly1000 MACH_SCLY1000 SCLY1000 1579 +fontel_ep MACH_FONTEL_EP FONTEL_EP 1580 +voiceblue3g MACH_VOICEBLUE3G VOICEBLUE3G 1581 +tt9200 MACH_TT9200 TT9200 1582 +digi2410 MACH_DIGI2410 DIGI2410 1583 +terastation_pro2 MACH_TERASTATION_PRO2 TERASTATION_PRO2 1584 +linkstation_pro MACH_LINKSTATION_PRO LINKSTATION_PRO 1585 +motorola_a780 MACH_MOTOROLA_A780 MOTOROLA_A780 1587 +motorola_e6 MACH_MOTOROLA_E6 MOTOROLA_E6 1588 +motorola_e2 MACH_MOTOROLA_E2 MOTOROLA_E2 1589 +motorola_e680 MACH_MOTOROLA_E680 MOTOROLA_E680 1590 +ur2410 MACH_UR2410 UR2410 1591 +tas9261 MACH_TAS9261 TAS9261 1592 +davinci_hermes_hd MACH_HERMES_HD HERMES_HD 1593 +davinci_perseo_hd MACH_PERSEO_HD PERSEO_HD 1594 +stargazer2 MACH_STARGAZER2 STARGAZER2 1595 +e350 MACH_E350 E350 1596 +wpcm450 MACH_WPCM450 WPCM450 1597 +cartesio MACH_CARTESIO CARTESIO 1598 +toybox MACH_TOYBOX TOYBOX 1599 +tx27 MACH_TX27 TX27 1600 +ts409 MACH_TS409 TS409 1601 +p300 MACH_P300 P300 1602 +xdacomet MACH_XDACOMET XDACOMET 1603 +dexflex2 MACH_DEXFLEX2 DEXFLEX2 1604 +ow MACH_OW OW 1605 +armebs3 MACH_ARMEBS3 ARMEBS3 1606 +u3 MACH_U3 U3 1607 +smdk2450 MACH_SMDK2450 SMDK2450 1608 +rsi_ews MACH_RSI_EWS RSI_EWS 1609 +tnb MACH_TNB TNB 1610 +toepath MACH_TOEPATH TOEPATH 1611 +kb9263 MACH_KB9263 KB9263 1612 +mt7108 MACH_MT7108 MT7108 1613 +smtr2440 MACH_SMTR2440 SMTR2440 1614 +manao MACH_MANAO MANAO 1615 diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index 791d0238c68f..c85860bad585 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -265,7 +265,11 @@ struct vfp_double { * which returns (double)0.0. This is useful for the compare with * zero instructions. */ +#ifdef CONFIG_VFPv3 +#define VFP_REG_ZERO 32 +#else #define VFP_REG_ZERO 16 +#endif extern u64 vfp_get_double(unsigned int reg); extern void vfp_put_double(u64 val, unsigned int reg); diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 0ac022f800a1..353f9e5c7919 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -99,12 +99,12 @@ vfp_support_entry: DBGSTR1 "save old state %p", r4 cmp r4, #0 beq no_old_VFP_process + VFPFSTMIA r4, r5 @ save the working registers VFPFMRX r5, FPSCR @ current status - VFPFMRX r6, FPINST @ FPINST (always there, rev0 onwards) - tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read? - VFPFMRX r8, FPINST2, NE @ FPINST2 if needed - avoids reading - @ nonexistant reg on rev0 - VFPFSTMIA r4 @ save the working registers + tst r1, #FPEXC_EX @ is there additional state to save? + VFPFMRX r6, FPINST, NE @ FPINST (only if FPEXC.EX is set) + tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read? + VFPFMRX r8, FPINST2, NE @ FPINST2 if needed (and present) stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2 @ and point r4 at the word at the @ start of the register dump @@ -114,13 +114,13 @@ no_old_VFP_process: DBGSTR1 "load state %p", r10 str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer @ Load the saved state back into the VFP - VFPFLDMIA r10 @ reload the working registers while + VFPFLDMIA r10, r5 @ reload the working registers while @ FPEXC is in a safe state ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2 - tst r1, #FPEXC_FPV2 @ is there an FPINST2 to write? - VFPFMXR FPINST2, r8, NE @ FPINST2 if needed - avoids writing - @ nonexistant reg on rev0 - VFPFMXR FPINST, r6 + tst r1, #FPEXC_EX @ is there additional state to restore? + VFPFMXR FPINST, r6, NE @ restore FPINST (only if FPEXC.EX is set) + tstne r1, #FPEXC_FP2V @ is there an FPINST2 to write? + VFPFMXR FPINST2, r8, NE @ FPINST2 if needed (and present) VFPFMXR FPSCR, r5 @ restore status check_for_exception: @@ -136,10 +136,14 @@ check_for_exception: look_for_VFP_exceptions: - tst r1, #FPEXC_EX + @ Check for synchronous or asynchronous exception + tst r1, #FPEXC_EX | FPEXC_DEX bne process_exception + @ On some implementations of the VFP subarch 1, setting FPSCR.IXE + @ causes all the CDP instructions to be bounced synchronously without + @ setting the FPEXC.EX bit VFPFMRX r5, FPSCR - tst r5, #FPSCR_IXE @ IXE doesn't set FPEXC_EX ! + tst r5, #FPSCR_IXE bne process_exception @ Fall into hand on to next handler - appropriate coproc instr @@ -150,10 +154,6 @@ look_for_VFP_exceptions: process_exception: DBGSTR "bounce" - sub r2, r2, #4 - str r2, [sp, #S_PC] @ retry the instruction on exit from - @ the imprecise exception handling in - @ the support code mov r2, sp @ nothing stacked - regdump is at TOS mov lr, r9 @ setup for a return to the user code. @@ -161,7 +161,7 @@ process_exception: @ r0 holds the trigger instruction @ r1 holds the FPEXC value @ r2 pointer to register dump - b VFP9_bounce @ we have handled this - the support + b VFP_bounce @ we have handled this - the support @ code will raise an exception if @ required. If not, the user code will @ retry the faulted instruction @@ -174,12 +174,12 @@ vfp_save_state: @ r0 - save location @ r1 - FPEXC DBGSTR1 "save VFP state %p", r0 + VFPFSTMIA r0, r2 @ save the working registers VFPFMRX r2, FPSCR @ current status - VFPFMRX r3, FPINST @ FPINST (always there, rev0 onwards) - tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read? - VFPFMRX r12, FPINST2, NE @ FPINST2 if needed - avoids reading - @ nonexistant reg on rev0 - VFPFSTMIA r0 @ save the working registers + tst r1, #FPEXC_EX @ is there additional state to save? + VFPFMRX r3, FPINST, NE @ FPINST (only if FPEXC.EX is set) + tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read? + VFPFMRX r12, FPINST2, NE @ FPINST2 if needed (and present) stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2 mov pc, lr #endif @@ -217,8 +217,15 @@ vfp_get_double: fmrrd r0, r1, d\dr mov pc, lr .endr +#ifdef CONFIG_VFPv3 + @ d16 - d31 registers + .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr + mov pc, lr + .endr +#endif - @ virtual register 16 for compare with zero + @ virtual register 16 (or 32 if VFPv3) for compare with zero mov r0, #0 mov r1, #0 mov pc, lr @@ -231,3 +238,10 @@ vfp_put_double: fmdrr d\dr, r0, r1 mov pc, lr .endr +#ifdef CONFIG_VFPv3 + @ d16 - d31 registers + .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr + mov pc, lr + .endr +#endif diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h index 7f343a4beca0..15b95b5ab97e 100644 --- a/arch/arm/vfp/vfpinstr.h +++ b/arch/arm/vfp/vfpinstr.h @@ -52,11 +52,11 @@ #define FEXT_TO_IDX(inst) ((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7) #define vfp_get_sd(inst) ((inst & 0x0000f000) >> 11 | (inst & (1 << 22)) >> 22) -#define vfp_get_dd(inst) ((inst & 0x0000f000) >> 12) +#define vfp_get_dd(inst) ((inst & 0x0000f000) >> 12 | (inst & (1 << 22)) >> 18) #define vfp_get_sm(inst) ((inst & 0x0000000f) << 1 | (inst & (1 << 5)) >> 5) -#define vfp_get_dm(inst) ((inst & 0x0000000f)) +#define vfp_get_dm(inst) ((inst & 0x0000000f) | (inst & (1 << 5)) >> 1) #define vfp_get_sn(inst) ((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7) -#define vfp_get_dn(inst) ((inst & 0x000f0000) >> 16) +#define vfp_get_dn(inst) ((inst & 0x000f0000) >> 16 | (inst & (1 << 7)) >> 3) #define vfp_single(inst) (((inst) & 0x0000f00) == 0xa00) diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index b4e210df92f2..32455c633f1c 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -125,13 +125,13 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) send_sig_info(SIGFPE, &info, current); } -static void vfp_panic(char *reason) +static void vfp_panic(char *reason, u32 inst) { int i; printk(KERN_ERR "VFP: Error: %s\n", reason); printk(KERN_ERR "VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n", - fmrx(FPEXC), fmrx(FPSCR), fmrx(FPINST)); + fmrx(FPEXC), fmrx(FPSCR), inst); for (i = 0; i < 32; i += 2) printk(KERN_ERR "VFP: s%2u: 0x%08x s%2u: 0x%08x\n", i, vfp_get_float(i), i+1, vfp_get_float(i+1)); @@ -147,19 +147,16 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_ pr_debug("VFP: raising exceptions %08x\n", exceptions); if (exceptions == VFP_EXCEPTION_ERROR) { - vfp_panic("unhandled bounce"); + vfp_panic("unhandled bounce", inst); vfp_raise_sigfpe(0, regs); return; } /* - * If any of the status flags are set, update the FPSCR. + * Update the FPSCR with the additional exception flags. * Comparison instructions always return at least one of * these flags set. */ - if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V)) - fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V); - fpscr |= exceptions; fmxr(FPSCR, fpscr); @@ -220,35 +217,64 @@ static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs) /* * Package up a bounce condition. */ -void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) +void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) { - u32 fpscr, orig_fpscr, exceptions, inst; + u32 fpscr, orig_fpscr, fpsid, exceptions; pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc); /* - * Enable access to the VFP so we can handle the bounce. + * At this point, FPEXC can have the following configuration: + * + * EX DEX IXE + * 0 1 x - synchronous exception + * 1 x 0 - asynchronous exception + * 1 x 1 - sychronous on VFP subarch 1 and asynchronous on later + * 0 0 1 - synchronous on VFP9 (non-standard subarch 1 + * implementation), undefined otherwise + * + * Clear various bits and enable access to the VFP so we can + * handle the bounce. */ - fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_FPV2|FPEXC_INV|FPEXC_UFC|FPEXC_OFC|FPEXC_IOC)); + fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_DEX|FPEXC_FP2V|FPEXC_VV|FPEXC_TRAP_MASK)); + fpsid = fmrx(FPSID); orig_fpscr = fpscr = fmrx(FPSCR); /* - * If we are running with inexact exceptions enabled, we need to - * emulate the trigger instruction. Note that as we're emulating - * the trigger instruction, we need to increment PC. + * Check for the special VFP subarch 1 and FPSCR.IXE bit case */ - if (fpscr & FPSCR_IXE) { - regs->ARM_pc += 4; + if ((fpsid & FPSID_ARCH_MASK) == (1 << FPSID_ARCH_BIT) + && (fpscr & FPSCR_IXE)) { + /* + * Synchronous exception, emulate the trigger instruction + */ goto emulate; } - barrier(); + if (fpexc & FPEXC_EX) { + /* + * Asynchronous exception. The instruction is read from FPINST + * and the interrupted instruction has to be restarted. + */ + trigger = fmrx(FPINST); + regs->ARM_pc -= 4; + } else if (!(fpexc & FPEXC_DEX)) { + /* + * Illegal combination of bits. It can be caused by an + * unallocated VFP instruction but with FPSCR.IXE set and not + * on VFP subarch 1. + */ + vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr, regs); + return; + } /* - * Modify fpscr to indicate the number of iterations remaining + * Modify fpscr to indicate the number of iterations remaining. + * If FPEXC.EX is 0, FPEXC.DEX is 1 and the FPEXC.VV bit indicates + * whether FPEXC.VECITR or FPSCR.LEN is used. */ - if (fpexc & FPEXC_EX) { + if (fpexc & (FPEXC_EX | FPEXC_VV)) { u32 len; len = fpexc + (1 << FPEXC_LENGTH_BIT); @@ -262,15 +288,15 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) * FPEXC bounce reason, but this appears to be unreliable. * Emulate the bounced instruction instead. */ - inst = fmrx(FPINST); - exceptions = vfp_emulate_instruction(inst, fpscr, regs); + exceptions = vfp_emulate_instruction(trigger, fpscr, regs); if (exceptions) - vfp_raise_exceptions(exceptions, inst, orig_fpscr, regs); + vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs); /* - * If there isn't a second FP instruction, exit now. + * If there isn't a second FP instruction, exit now. Note that + * the FPEXC.FP2V bit is valid only if FPEXC.EX is 1. */ - if (!(fpexc & FPEXC_FPV2)) + if (fpexc ^ (FPEXC_EX | FPEXC_FP2V)) return; /* @@ -279,10 +305,9 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) */ barrier(); trigger = fmrx(FPINST2); - orig_fpscr = fpscr = fmrx(FPSCR); emulate: - exceptions = vfp_emulate_instruction(trigger, fpscr, regs); + exceptions = vfp_emulate_instruction(trigger, orig_fpscr, regs); if (exceptions) vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs); } @@ -306,16 +331,9 @@ static int __init vfp_init(void) { unsigned int vfpsid; unsigned int cpu_arch = cpu_architecture(); - u32 access = 0; - if (cpu_arch >= CPU_ARCH_ARMv6) { - access = get_copro_access(); - - /* - * Enable full access to VFP (cp10 and cp11) - */ - set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11)); - } + if (cpu_arch >= CPU_ARCH_ARMv6) + vfp_enable(NULL); /* * First check that there is a VFP that we can use. @@ -329,15 +347,9 @@ static int __init vfp_init(void) vfp_vector = vfp_null_entry; printk(KERN_INFO "VFP support v0.3: "); - if (VFP_arch) { + if (VFP_arch) printk("not present\n"); - - /* - * Restore the copro access register. - */ - if (cpu_arch >= CPU_ARCH_ARMv6) - set_copro_access(access); - } else if (vfpsid & FPSID_NODOUBLE) { + else if (vfpsid & FPSID_NODOUBLE) { printk("no double precision support\n"); } else { smp_call_function(vfp_enable, NULL, 1, 1); diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c index 548a32082e4a..4316f5a48a0f 100644 --- a/arch/powerpc/sysdev/mv64x60_dev.c +++ b/arch/powerpc/sysdev/mv64x60_dev.c @@ -361,12 +361,6 @@ static int __init mv64x60_i2c_device_setup(struct device_node *np, int id) else pdata.timeout = 1000; /* 1 second */ - prop = of_get_property(np, "retries", NULL); - if (prop) - pdata.retries = *prop; - else - pdata.retries = 1; - pdev = platform_device_alloc(MV64XXX_I2C_CTLR_NAME, id); if (!pdev) return -ENOMEM; diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c index 2744b8a6f66a..90fe904d3614 100644 --- a/arch/ppc/syslib/mv64x60.c +++ b/arch/ppc/syslib/mv64x60.c @@ -411,7 +411,6 @@ static struct mv64xxx_i2c_pdata mv64xxx_i2c_pdata = { .freq_m = 8, .freq_n = 3, .timeout = 1000, /* Default timeout of 1 second */ - .retries = 1, }; static struct resource mv64xxx_i2c_resources[] = { diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 8d12b26bb6c6..b61f56b6f311 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -643,7 +643,7 @@ config I2C_PCA_ISA config I2C_MV64XXX tristate "Marvell mv64xxx I2C Controller" - depends on MV64X60 && EXPERIMENTAL + depends on (MV64X60 || ARCH_ORION) && EXPERIMENTAL help If you say yes to this option, support will be included for the built-in I2C interface on the Marvell 64xxx line of host bridges. diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index bb7bf68a7fb6..036e6a883e67 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -1,6 +1,6 @@ /* - * Driver for the i2c controller on the Marvell line of host bridges for MIPS - * and PPC (e.g, gt642[46]0, mv643[46]0, mv644[46]0). + * Driver for the i2c controller on the Marvell line of host bridges + * (e.g, gt642[46]0, mv643[46]0, mv644[46]0, and Orion SoC family). * * Author: Mark A. Greer <mgreer@mvista.com> * @@ -14,7 +14,7 @@ #include <linux/spinlock.h> #include <linux/i2c.h> #include <linux/interrupt.h> -#include <linux/mv643xx.h> +#include <linux/mv643xx_i2c.h> #include <linux/platform_device.h> #include <asm/io.h> @@ -86,6 +86,7 @@ struct mv64xxx_i2c_data { u32 cntl_bits; void __iomem *reg_base; u32 reg_base_p; + u32 reg_size; u32 addr1; u32 addr2; u32 bytes_left; @@ -463,17 +464,20 @@ static int __devinit mv64xxx_i2c_map_regs(struct platform_device *pd, struct mv64xxx_i2c_data *drv_data) { - struct resource *r; + int size; + struct resource *r = platform_get_resource(pd, IORESOURCE_MEM, 0); - if ((r = platform_get_resource(pd, IORESOURCE_MEM, 0)) && - request_mem_region(r->start, MV64XXX_I2C_REG_BLOCK_SIZE, - drv_data->adapter.name)) { + if (!r) + return -ENODEV; - drv_data->reg_base = ioremap(r->start, - MV64XXX_I2C_REG_BLOCK_SIZE); - drv_data->reg_base_p = r->start; - } else - return -ENOMEM; + size = r->end - r->start + 1; + + if (!request_mem_region(r->start, size, drv_data->adapter.name)) + return -EBUSY; + + drv_data->reg_base = ioremap(r->start, size); + drv_data->reg_base_p = r->start; + drv_data->reg_size = size; return 0; } @@ -483,8 +487,7 @@ mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data) { if (drv_data->reg_base) { iounmap(drv_data->reg_base); - release_mem_region(drv_data->reg_base_p, - MV64XXX_I2C_REG_BLOCK_SIZE); + release_mem_region(drv_data->reg_base_p, drv_data->reg_size); } drv_data->reg_base = NULL; @@ -529,7 +532,6 @@ mv64xxx_i2c_probe(struct platform_device *pd) drv_data->adapter.owner = THIS_MODULE; drv_data->adapter.class = I2C_CLASS_HWMON; drv_data->adapter.timeout = pdata->timeout; - drv_data->adapter.retries = pdata->retries; drv_data->adapter.nr = pd->id; platform_set_drvdata(pd, drv_data); i2c_set_adapdata(&drv_data->adapter, drv_data); diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c index b1b2e07bf080..99d92f5c93d6 100644 --- a/drivers/input/touchscreen/corgi_ts.c +++ b/drivers/input/touchscreen/corgi_ts.c @@ -74,10 +74,10 @@ extern unsigned int get_clk_frequency_khz(int info); static unsigned long calc_waittime(struct corgi_ts *corgi_ts) { - unsigned long hsync_len = corgi_ts->machinfo->get_hsync_len(); + unsigned long hsync_invperiod = corgi_ts->machinfo->get_hsync_invperiod(); - if (hsync_len) - return get_clk_frequency_khz(0)*1000/hsync_len; + if (hsync_invperiod) + return get_clk_frequency_khz(0)*1000/hsync_invperiod; else return 0; } @@ -114,7 +114,7 @@ static int sync_receive_data_send_cmd(struct corgi_ts *corgi_ts, int doRecive, i if (timer2-timer1 > wait_time) { /* too slow - timeout, try again */ corgi_ts->machinfo->wait_hsync(); - /* get OSCR */ + /* get CCNT */ CCNT(timer1); /* Wait after HSync */ CCNT(timer2); diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c index b7c8e7813865..61aeaf79640d 100644 --- a/drivers/mfd/ucb1x00-assabet.c +++ b/drivers/mfd/ucb1x00-assabet.c @@ -20,7 +20,7 @@ #include "ucb1x00.h" #define UCB1X00_ATTR(name,input)\ -static ssize_t name##_show(struct device *dev, struct device_attribute *attr, +static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \ char *buf) \ { \ struct ucb1x00 *ucb = classdev_to_ucb1x00(dev); \ @@ -38,17 +38,17 @@ UCB1X00_ATTR(batt_temp, UCB_ADC_INP_AD2); static int ucb1x00_assabet_add(struct ucb1x00_dev *dev) { - device_create_file(&dev->ucb->dev, &device_attr_vbatt); - device_create_file(&dev->ucb->dev, &device_attr_vcharger); - device_create_file(&dev->ucb->dev, &device_attr_batt_temp); + device_create_file(&dev->ucb->dev, &dev_attr_vbatt); + device_create_file(&dev->ucb->dev, &dev_attr_vcharger); + device_create_file(&dev->ucb->dev, &dev_attr_batt_temp); return 0; } static void ucb1x00_assabet_remove(struct ucb1x00_dev *dev) { - device_remove_file(&dev->ucb->cdev, &device_attr_batt_temp); - device_remove_file(&dev->ucb->cdev, &device_attr_vcharger); - device_remove_file(&dev->ucb->cdev, &device_attr_vbatt); + device_remove_file(&dev->ucb->dev, &dev_attr_batt_temp); + device_remove_file(&dev->ucb->dev, &dev_attr_vcharger); + device_remove_file(&dev->ucb->dev, &dev_attr_vbatt); } static struct ucb1x00_driver ucb1x00_assabet_driver = { diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 1654a3330340..1ea8482037bb 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -65,6 +65,8 @@ struct pxamci_host { unsigned int dma_len; unsigned int dma_dir; + unsigned int dma_drcmrrx; + unsigned int dma_drcmrtx; }; static void pxamci_stop_clock(struct pxamci_host *host) @@ -131,13 +133,13 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) if (data->flags & MMC_DATA_READ) { host->dma_dir = DMA_FROM_DEVICE; dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG; - DRCMRTXMMC = 0; - DRCMRRXMMC = host->dma | DRCMR_MAPVLD; + DRCMR(host->dma_drcmrtx) = 0; + DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD; } else { host->dma_dir = DMA_TO_DEVICE; dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC; - DRCMRRXMMC = 0; - DRCMRTXMMC = host->dma | DRCMR_MAPVLD; + DRCMR(host->dma_drcmrrx) = 0; + DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD; } dcmd |= DCMD_BURST32 | DCMD_WIDTH1; @@ -375,14 +377,23 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->clkrt == CLKRT_OFF) clk_enable(host->clk); - /* - * clk might result in a lower divisor than we - * desire. check for that condition and adjust - * as appropriate. - */ - if (rate / clk > ios->clock) - clk <<= 1; - host->clkrt = fls(clk) - 1; + if (ios->clock == 26000000) { + /* to support 26MHz on pxa300/pxa310 */ + host->clkrt = 7; + } else { + /* to handle (19.5MHz, 26MHz) */ + if (!clk) + clk = 1; + + /* + * clk might result in a lower divisor than we + * desire. check for that condition and adjust + * as appropriate. + */ + if (rate / clk > ios->clock) + clk <<= 1; + host->clkrt = fls(clk) - 1; + } /* * we write clkrt on the next command @@ -459,7 +470,7 @@ static int pxamci_probe(struct platform_device *pdev) { struct mmc_host *mmc; struct pxamci_host *host = NULL; - struct resource *r; + struct resource *r, *dmarx, *dmatx; int ret, irq; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -519,7 +530,8 @@ static int pxamci_probe(struct platform_device *pdev) * Calculate minimum clock rate, rounding up. */ mmc->f_min = (host->clkrate + 63) / 64; - mmc->f_max = host->clkrate; + mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000 + : host->clkrate; mmc->ocr_avail = host->pdata ? host->pdata->ocr_mask : @@ -529,6 +541,9 @@ static int pxamci_probe(struct platform_device *pdev) if (!cpu_is_pxa21x() && !cpu_is_pxa25x()) { mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; host->cmdat |= CMDAT_SDIO_INT_EN; + if (cpu_is_pxa300() || cpu_is_pxa310()) + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_SD_HIGHSPEED; } host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL); @@ -570,6 +585,20 @@ static int pxamci_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mmc); + dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!dmarx) { + ret = -ENXIO; + goto out; + } + host->dma_drcmrrx = dmarx->start; + + dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (!dmatx) { + ret = -ENXIO; + goto out; + } + host->dma_drcmrtx = dmatx->start; + if (host->pdata && host->pdata->init) host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc); @@ -613,8 +642,8 @@ static int pxamci_remove(struct platform_device *pdev) END_CMD_RES|PRG_DONE|DATA_TRAN_DONE, host->base + MMC_I_MASK); - DRCMRRXMMC = 0; - DRCMRTXMMC = 0; + DRCMR(host->dma_drcmrrx) = 0; + DRCMR(host->dma_drcmrtx) = 0; free_irq(host->irq, host); pxa_free_dma(host->dma); diff --git a/drivers/mmc/host/pxamci.h b/drivers/mmc/host/pxamci.h index 748c7706f237..f6c2e2fcce37 100644 --- a/drivers/mmc/host/pxamci.h +++ b/drivers/mmc/host/pxamci.h @@ -68,7 +68,7 @@ #define PRG_DONE (1 << 1) #define DATA_TRAN_DONE (1 << 0) -#ifdef CONFIG_PXA27x +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #define MMC_I_MASK_ALL 0x00001fff #else #define MMC_I_MASK_ALL 0x0000007f diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9af05a2f4af3..a6728661c416 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -212,7 +212,7 @@ config MII config MACB tristate "Atmel MACB support" - depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 + depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9 select PHYLIB help The Atmel MACB ethernet interface is found on many AT32 and AT91 diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 3286d2a0a870..6a20a5491a96 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -66,6 +66,7 @@ #include <linux/dm9000.h> #include <linux/delay.h> #include <linux/platform_device.h> +#include <linux/irq.h> #include <asm/delay.h> #include <asm/irq.h> @@ -113,7 +114,7 @@ #define writesl outsl #define DM9000_IRQ_FLAGS (IRQF_SHARED | IRQF_TRIGGER_HIGH) #else -#define DM9000_IRQ_FLAGS IRQF_SHARED +#define DM9000_IRQ_FLAGS (IRQF_SHARED | IRQT_RISING) #endif /* diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 7da7589d45dd..4020e9e955b3 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1775,7 +1775,8 @@ static int __init smc_findirq(void __iomem *ioaddr) * o actually GRAB the irq. * o GRAB the region */ -static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr) +static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr, + unsigned long irq_flags) { struct smc_local *lp = netdev_priv(dev); static int version_printed = 0; @@ -1941,7 +1942,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr) } /* Grab the IRQ */ - retval = request_irq(dev->irq, &smc_interrupt, SMC_IRQ_FLAGS, dev->name, dev); + retval = request_irq(dev->irq, &smc_interrupt, irq_flags, dev->name, dev); if (retval) goto err_out; @@ -2123,8 +2124,9 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * static int smc_drv_probe(struct platform_device *pdev) { struct net_device *ndev; - struct resource *res; + struct resource *res, *ires; unsigned int __iomem *addr; + unsigned long irq_flags = SMC_IRQ_FLAGS; int ret; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs"); @@ -2150,12 +2152,17 @@ static int smc_drv_probe(struct platform_device *pdev) SET_NETDEV_DEV(ndev, &pdev->dev); ndev->dma = (unsigned char)-1; - ndev->irq = platform_get_irq(pdev, 0); - if (ndev->irq < 0) { + + ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!ires) { ret = -ENODEV; goto out_free_netdev; } + ndev->irq = ires->start; + if (SMC_IRQ_FLAGS == -1) + irq_flags = ires->flags & IRQF_TRIGGER_MASK; + ret = smc_request_attrib(pdev); if (ret) goto out_free_netdev; @@ -2181,7 +2188,7 @@ static int smc_drv_probe(struct platform_device *pdev) #endif platform_set_drvdata(pdev, ndev); - ret = smc_probe(ndev, addr); + ret = smc_probe(ndev, addr, irq_flags); if (ret != 0) goto out_iounmap; diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 07b7f7120e37..271c28dc9baa 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -54,6 +54,7 @@ #define SMC_outw(v, a, r) writew(v, (a) + (r)) #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) +#define SMC_IRQ_FLAGS (-1) /* from resource */ #elif defined(CONFIG_BLACKFIN) @@ -158,7 +159,7 @@ #define SMC_outw(v, a, r) writew(v, (a) + (r)) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) -#define SMC_IRQ_FLAGS (0) +#define SMC_IRQ_FLAGS (-1) #elif defined(CONFIG_SA1100_ASSABET) @@ -177,6 +178,7 @@ #define SMC_outb(v, a, r) writeb(v, (a) + (r)) #define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l)) #define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) +#define SMC_IRQ_FLAGS (-1) /* from resource */ #elif defined(CONFIG_MACH_LOGICPD_PXA270) @@ -194,7 +196,8 @@ #elif defined(CONFIG_ARCH_INNOKOM) || \ defined(CONFIG_MACH_MAINSTONE) || \ defined(CONFIG_ARCH_PXA_IDP) || \ - defined(CONFIG_ARCH_RAMSES) + defined(CONFIG_ARCH_RAMSES) || \ + defined(CONFIG_ARCH_PCM027) #define SMC_CAN_USE_8BIT 1 #define SMC_CAN_USE_16BIT 1 @@ -210,6 +213,7 @@ #define SMC_outl(v, a, r) writel(v, (a) + (r)) #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) +#define SMC_IRQ_FLAGS (-1) /* from resource */ /* We actually can't write halfwords properly if not word aligned */ static inline void @@ -238,6 +242,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) #define SMC_outb(v, a, r) writeb(v, (a) + (r)) #define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_IRQ_FLAGS (-1) /* from resource */ #elif defined(CONFIG_ARCH_OMAP) @@ -252,17 +257,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_outw(v, a, r) writew(v, (a) + (r)) #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) - -#include <asm/mach-types.h> -#include <asm/arch/cpu.h> - -#define SMC_IRQ_FLAGS (( \ - machine_is_omap_h2() \ - || machine_is_omap_h3() \ - || machine_is_omap_h4() \ - || (machine_is_omap_innovator() && !cpu_is_omap1510()) \ - ) ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING) - +#define SMC_IRQ_FLAGS (-1) /* from resource */ #elif defined(CONFIG_SH_SH4202_MICRODEV) @@ -453,8 +448,7 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r, #define SMC_outl(v, a, r) writel(v, (a) + (r)) #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) - -#define SMC_IRQ_FLAGS (0) +#define SMC_IRQ_FLAGS (-1) /* from resource */ #else diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 874923fcb2f9..e439044d88f2 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -29,6 +29,7 @@ #include <asm/irq.h> #include <asm/system.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> #include <pcmcia/cs_types.h> #include <pcmcia/ss.h> diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 6f1e9a9804bc..2eb38520f0c8 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -337,6 +337,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev) if (IS_ERR(rtc)) return PTR_ERR(rtc); + device_init_wakeup(&pdev->dev, 1); + platform_set_drvdata(pdev, rtc); return 0; @@ -352,9 +354,38 @@ static int sa1100_rtc_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +static int sa1100_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + if (pdev->dev.power.power_state.event != state.event) { + if (state.event == PM_EVENT_SUSPEND && + device_may_wakeup(&pdev->dev)) + enable_irq_wake(IRQ_RTCAlrm); + + pdev->dev.power.power_state = state; + } + return 0; +} + +static int sa1100_rtc_resume(struct platform_device *pdev) +{ + if (pdev->dev.power.power_state.event != PM_EVENT_ON) { + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(IRQ_RTCAlrm); + pdev->dev.power.power_state = PMSG_ON; + } + return 0; +} +#else +#define sa1100_rtc_suspend NULL +#define sa1100_rtc_resume NULL +#endif + static struct platform_driver sa1100_rtc_driver = { .probe = sa1100_rtc_probe, .remove = sa1100_rtc_remove, + .suspend = sa1100_rtc_suspend, + .resume = sa1100_rtc_resume, .driver = { .name = "sa1100-rtc", }, diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index facb67855619..6a48dfa1efe8 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -277,6 +277,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios, if (termios->c_iflag & INPCK) port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; + tty_encode_baud_rate(tty, baud, baud); + /* * Which character status flags should we ignore? */ diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index abf05048c638..aaaea81e412a 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -153,6 +153,7 @@ config SPI_OMAP24XX config SPI_PXA2XX tristate "PXA2xx SSP SPI master" depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL + select PXA_SSP help This enables using a PXA2xx SSP port as a SPI master controller. The driver can be configured to use any SSP port and additional diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 1c2ab541d37d..eb817b8eb024 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -27,6 +27,7 @@ #include <linux/spi/spi.h> #include <linux/workqueue.h> #include <linux/delay.h> +#include <linux/clk.h> #include <asm/io.h> #include <asm/irq.h> @@ -36,6 +37,8 @@ #include <asm/arch/hardware.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/regs-ssp.h> +#include <asm/arch/ssp.h> #include <asm/arch/pxa2xx_spi.h> MODULE_AUTHOR("Stephen Street"); @@ -80,6 +83,9 @@ struct driver_data { /* Driver model hookup */ struct platform_device *pdev; + /* SSP Info */ + struct ssp_device *ssp; + /* SPI framework hookup */ enum pxa_ssp_type ssp_type; struct spi_master *master; @@ -778,6 +784,16 @@ int set_dma_burst_and_threshold(struct chip_data *chip, struct spi_device *spi, return retval; } +static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate) +{ + unsigned long ssp_clk = clk_get_rate(ssp->clk); + + if (ssp->type == PXA25x_SSP) + return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8; + else + return ((ssp_clk / rate - 1) & 0xfff) << 8; +} + static void pump_transfers(unsigned long data) { struct driver_data *drv_data = (struct driver_data *)data; @@ -785,6 +801,7 @@ static void pump_transfers(unsigned long data) struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; struct chip_data *chip = NULL; + struct ssp_device *ssp = drv_data->ssp; void *reg = drv_data->ioaddr; u32 clk_div = 0; u8 bits = 0; @@ -866,12 +883,7 @@ static void pump_transfers(unsigned long data) if (transfer->bits_per_word) bits = transfer->bits_per_word; - if (reg == SSP1_VIRT) - clk_div = SSP1_SerClkDiv(speed); - else if (reg == SSP2_VIRT) - clk_div = SSP2_SerClkDiv(speed); - else if (reg == SSP3_VIRT) - clk_div = SSP3_SerClkDiv(speed); + clk_div = ssp_get_clk_div(ssp, speed); if (bits <= 8) { drv_data->n_bytes = 1; @@ -1074,6 +1086,7 @@ static int setup(struct spi_device *spi) struct pxa2xx_spi_chip *chip_info = NULL; struct chip_data *chip; struct driver_data *drv_data = spi_master_get_devdata(spi->master); + struct ssp_device *ssp = drv_data->ssp; unsigned int clk_div; if (!spi->bits_per_word) @@ -1157,18 +1170,7 @@ static int setup(struct spi_device *spi) } } - if (drv_data->ioaddr == SSP1_VIRT) - clk_div = SSP1_SerClkDiv(spi->max_speed_hz); - else if (drv_data->ioaddr == SSP2_VIRT) - clk_div = SSP2_SerClkDiv(spi->max_speed_hz); - else if (drv_data->ioaddr == SSP3_VIRT) - clk_div = SSP3_SerClkDiv(spi->max_speed_hz); - else - { - dev_err(&spi->dev, "failed setup: unknown IO address=0x%p\n", - drv_data->ioaddr); - return -ENODEV; - } + clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz); chip->speed_hz = spi->max_speed_hz; chip->cr0 = clk_div @@ -1183,15 +1185,15 @@ static int setup(struct spi_device *spi) /* NOTE: PXA25x_SSP _could_ use external clocking ... */ if (drv_data->ssp_type != PXA25x_SSP) - dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n", + dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n", spi->bits_per_word, - (CLOCK_SPEED_HZ) + clk_get_rate(ssp->clk) / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), spi->mode & 0x3); else - dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n", + dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n", spi->bits_per_word, - (CLOCK_SPEED_HZ/2) + clk_get_rate(ssp->clk) / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), spi->mode & 0x3); @@ -1323,14 +1325,14 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) struct pxa2xx_spi_master *platform_info; struct spi_master *master; struct driver_data *drv_data = 0; - struct resource *memory_resource; - int irq; + struct ssp_device *ssp; int status = 0; platform_info = dev->platform_data; - if (platform_info->ssp_type == SSP_UNDEFINED) { - dev_err(&pdev->dev, "undefined SSP\n"); + ssp = ssp_request(pdev->id, pdev->name); + if (ssp == NULL) { + dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id); return -ENODEV; } @@ -1338,12 +1340,14 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); if (!master) { dev_err(&pdev->dev, "can not alloc spi_master\n"); + ssp_free(ssp); return -ENOMEM; } drv_data = spi_master_get_devdata(master); drv_data->master = master; drv_data->master_info = platform_info; drv_data->pdev = pdev; + drv_data->ssp = ssp; master->bus_num = pdev->id; master->num_chipselect = platform_info->num_chipselect; @@ -1351,21 +1355,13 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) master->setup = setup; master->transfer = transfer; - drv_data->ssp_type = platform_info->ssp_type; + drv_data->ssp_type = ssp->type; drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data + sizeof(struct driver_data)), 8); - /* Setup register addresses */ - memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!memory_resource) { - dev_err(&pdev->dev, "memory resources not defined\n"); - status = -ENODEV; - goto out_error_master_alloc; - } - - drv_data->ioaddr = (void *)io_p2v((unsigned long)(memory_resource->start)); - drv_data->ssdr_physical = memory_resource->start + 0x00000010; - if (platform_info->ssp_type == PXA25x_SSP) { + drv_data->ioaddr = ssp->mmio_base; + drv_data->ssdr_physical = ssp->phys_base + SSDR; + if (ssp->type == PXA25x_SSP) { drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE; drv_data->dma_cr1 = 0; drv_data->clear_sr = SSSR_ROR; @@ -1377,15 +1373,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR; } - /* Attach to IRQ */ - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "irq resource not defined\n"); - status = -ENODEV; - goto out_error_master_alloc; - } - - status = request_irq(irq, ssp_int, 0, dev->bus_id, drv_data); + status = request_irq(ssp->irq, ssp_int, 0, dev->bus_id, drv_data); if (status < 0) { dev_err(&pdev->dev, "can not get IRQ\n"); goto out_error_master_alloc; @@ -1418,29 +1406,12 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) goto out_error_dma_alloc; } - if (drv_data->ioaddr == SSP1_VIRT) { - DRCMRRXSSDR = DRCMR_MAPVLD - | drv_data->rx_channel; - DRCMRTXSSDR = DRCMR_MAPVLD - | drv_data->tx_channel; - } else if (drv_data->ioaddr == SSP2_VIRT) { - DRCMRRXSS2DR = DRCMR_MAPVLD - | drv_data->rx_channel; - DRCMRTXSS2DR = DRCMR_MAPVLD - | drv_data->tx_channel; - } else if (drv_data->ioaddr == SSP3_VIRT) { - DRCMRRXSS3DR = DRCMR_MAPVLD - | drv_data->rx_channel; - DRCMRTXSS3DR = DRCMR_MAPVLD - | drv_data->tx_channel; - } else { - dev_err(dev, "bad SSP type\n"); - goto out_error_dma_alloc; - } + DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel; + DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel; } /* Enable SOC clock */ - pxa_set_cken(platform_info->clock_enable, 1); + clk_enable(ssp->clk); /* Load default SSP configuration */ write_SSCR0(0, drv_data->ioaddr); @@ -1479,7 +1450,7 @@ out_error_queue_alloc: destroy_queue(drv_data); out_error_clock_enabled: - pxa_set_cken(platform_info->clock_enable, 0); + clk_disable(ssp->clk); out_error_dma_alloc: if (drv_data->tx_channel != -1) @@ -1488,17 +1459,18 @@ out_error_dma_alloc: pxa_free_dma(drv_data->rx_channel); out_error_irq_alloc: - free_irq(irq, drv_data); + free_irq(ssp->irq, drv_data); out_error_master_alloc: spi_master_put(master); + ssp_free(ssp); return status; } static int pxa2xx_spi_remove(struct platform_device *pdev) { struct driver_data *drv_data = platform_get_drvdata(pdev); - int irq; + struct ssp_device *ssp = drv_data->ssp; int status = 0; if (!drv_data) @@ -1520,28 +1492,21 @@ static int pxa2xx_spi_remove(struct platform_device *pdev) /* Disable the SSP at the peripheral and SOC level */ write_SSCR0(0, drv_data->ioaddr); - pxa_set_cken(drv_data->master_info->clock_enable, 0); + clk_disable(ssp->clk); /* Release DMA */ if (drv_data->master_info->enable_dma) { - if (drv_data->ioaddr == SSP1_VIRT) { - DRCMRRXSSDR = 0; - DRCMRTXSSDR = 0; - } else if (drv_data->ioaddr == SSP2_VIRT) { - DRCMRRXSS2DR = 0; - DRCMRTXSS2DR = 0; - } else if (drv_data->ioaddr == SSP3_VIRT) { - DRCMRRXSS3DR = 0; - DRCMRTXSS3DR = 0; - } + DRCMR(ssp->drcmr_rx) = 0; + DRCMR(ssp->drcmr_tx) = 0; pxa_free_dma(drv_data->tx_channel); pxa_free_dma(drv_data->rx_channel); } /* Release IRQ */ - irq = platform_get_irq(pdev, 0); - if (irq >= 0) - free_irq(irq, drv_data); + free_irq(ssp->irq, drv_data); + + /* Release SSP */ + ssp_free(ssp); /* Disconnect from the SPI framework */ spi_unregister_master(drv_data->master); @@ -1576,6 +1541,7 @@ static int suspend_devices(struct device *dev, void *pm_message) static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state) { struct driver_data *drv_data = platform_get_drvdata(pdev); + struct ssp_device *ssp = drv_data->ssp; int status = 0; /* Check all childern for current power state */ @@ -1588,7 +1554,7 @@ static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state) if (status != 0) return status; write_SSCR0(0, drv_data->ioaddr); - pxa_set_cken(drv_data->master_info->clock_enable, 0); + clk_disable(ssp->clk); return 0; } @@ -1596,10 +1562,11 @@ static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state) static int pxa2xx_spi_resume(struct platform_device *pdev) { struct driver_data *drv_data = platform_get_drvdata(pdev); + struct ssp_device *ssp = drv_data->ssp; int status = 0; /* Enable the SSP clock */ - pxa_set_cken(drv_data->master_info->clock_enable, 1); + clk_disable(ssp->clk); /* Start the queue running */ status = start_queue(drv_data); diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 7580aa5da0f8..7a6499008b89 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -33,6 +33,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_LH7A404 default y if ARCH_S3C2410 default y if PXA27x + default y if PXA3xx default y if ARCH_EP93XX default y if ARCH_AT91 default y if ARCH_PNX4008 diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index f81d08d6538b..77a3759d6fc7 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -308,7 +308,7 @@ config USB_S3C2410_DEBUG config USB_GADGET_AT91 boolean "AT91 USB Device Port" - depends on ARCH_AT91 && !ARCH_AT91SAM9RL + depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 select USB_GADGET_SELECTED help Many Atmel AT91 processors (such as the AT91RM2000) have a diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index ecfe800fd720..ddd4ee1f2413 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -997,7 +997,7 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_lh7a404_driver #endif -#ifdef CONFIG_PXA27x +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #include "ohci-pxa27x.c" #define PLATFORM_DRIVER ohci_hcd_pxa27x_driver #endif diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 23d2fe5a62f4..ff9a79843471 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -22,6 +22,7 @@ #include <linux/device.h> #include <linux/signal.h> #include <linux/platform_device.h> +#include <linux/clk.h> #include <asm/mach-types.h> #include <asm/hardware.h> @@ -32,6 +33,8 @@ #define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 ) +static struct clk *usb_clk; + /* PMM_NPS_MODE -- PMM Non-power switching mode Ports are powered continuously. @@ -80,7 +83,7 @@ static int pxa27x_start_hc(struct device *dev) inf = dev->platform_data; - pxa_set_cken(CKEN_USBHOST, 1); + clk_enable(usb_clk); UHCHR |= UHCHR_FHR; udelay(11); @@ -123,7 +126,7 @@ static void pxa27x_stop_hc(struct device *dev) UHCCOMS |= 1; udelay(10); - pxa_set_cken(CKEN_USBHOST, 0); + clk_disable(usb_clk); } @@ -158,6 +161,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device return -ENOMEM; } + usb_clk = clk_get(&pdev->dev, "USBCLK"); + if (IS_ERR(usb_clk)) + return PTR_ERR(usb_clk); + hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x"); if (!hcd) return -ENOMEM; @@ -201,6 +208,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); + clk_put(usb_clk); return retval; } @@ -225,6 +233,7 @@ void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev) iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); + clk_put(usb_clk); } /*-------------------------------------------------------------------------*/ diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 5b3dbcfcda48..758435f8a6f8 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -889,7 +889,7 @@ config FB_S1D13XXX config FB_ATMEL tristate "AT91/AT32 LCD Controller support" - depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32) + depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 7c30cc8df71e..f8e711147501 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -30,7 +30,7 @@ #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 #define ATMEL_LCDC_DMA_BURST_LEN 8 -#if defined(CONFIG_ARCH_AT91SAM9263) +#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) #define ATMEL_LCDC_FIFO_SIZE 2048 #else #define ATMEL_LCDC_FIFO_SIZE 512 diff --git a/include/asm-arm/arch-at91/at91_lcdc.h b/include/asm-arm/arch-at91/at91_lcdc.h deleted file mode 100644 index ab040a40d37b..000000000000 --- a/include/asm-arm/arch-at91/at91_lcdc.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_lcdc.h - * - * LCD Controller (LCDC). - * Based on AT91SAM9261 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_LCDC_H -#define AT91_LCDC_H - -#define AT91_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */ -#define AT91_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */ -#define AT91_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */ -#define AT91_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */ -#define AT91_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */ -#define AT91_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */ - -#define AT91_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */ -#define AT91_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */ -#define AT91_LCDC_BLENGTH (0x7f << 24) /* Burst Length */ - -#define AT91_LCDC_DMACON 0x1c /* DMA Control Register */ -#define AT91_LCDC_DMAEN (0x1 << 0) /* DMA Enable */ -#define AT91_LCDC_DMARST (0x1 << 1) /* DMA Reset */ -#define AT91_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */ - -#define AT91_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */ -#define AT91_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */ -#define AT91_LCDC_CLKVAL (0x1ff << 12) /* Clock Divider */ -#define AT91_LCDC_LINCNT (0x7ff << 21) /* Line Counter */ - -#define AT91_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */ -#define AT91_LCDC_DISTYPE (3 << 0) /* Display Type */ -#define AT91_LCDC_DISTYPE_STNMONO (0 << 0) -#define AT91_LCDC_DISTYPE_STNCOLOR (1 << 0) -#define AT91_LCDC_DISTYPE_TFT (2 << 0) -#define AT91_LCDC_SCANMOD (1 << 2) /* Scan Mode */ -#define AT91_LCDC_SCANMOD_SINGLE (0 << 2) -#define AT91_LCDC_SCANMOD_DUAL (1 << 2) -#define AT91_LCDC_IFWIDTH (3 << 3) /*Interface Width */ -#define AT91_LCDC_IFWIDTH_4 (0 << 3) -#define AT91_LCDC_IFWIDTH_8 (1 << 3) -#define AT91_LCDC_IFWIDTH_16 (2 << 3) -#define AT91_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */ -#define AT91_LCDC_PIXELSIZE_1 (0 << 5) -#define AT91_LCDC_PIXELSIZE_2 (1 << 5) -#define AT91_LCDC_PIXELSIZE_4 (2 << 5) -#define AT91_LCDC_PIXELSIZE_8 (3 << 5) -#define AT91_LCDC_PIXELSIZE_16 (4 << 5) -#define AT91_LCDC_PIXELSIZE_24 (5 << 5) -#define AT91_LCDC_INVVD (1 << 8) /* LCD Data polarity */ -#define AT91_LCDC_INVVD_NORMAL (0 << 8) -#define AT91_LCDC_INVVD_INVERTED (1 << 8) -#define AT91_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */ -#define AT91_LCDC_INVFRAME_NORMAL (0 << 9) -#define AT91_LCDC_INVFRAME_INVERTED (1 << 9) -#define AT91_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */ -#define AT91_LCDC_INVLINE_NORMAL (0 << 10) -#define AT91_LCDC_INVLINE_INVERTED (1 << 10) -#define AT91_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */ -#define AT91_LCDC_INVCLK_NORMAL (0 << 11) -#define AT91_LCDC_INVCLK_INVERTED (1 << 11) -#define AT91_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */ -#define AT91_LCDC_INVDVAL_NORMAL (0 << 12) -#define AT91_LCDC_INVDVAL_INVERTED (1 << 12) -#define AT91_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */ -#define AT91_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15) -#define AT91_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15) -#define AT91_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */ -#define AT91_LCDC_MEMOR_BIG (0 << 31) -#define AT91_LCDC_MEMOR_LITTLE (1 << 31) - -#define AT91_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */ -#define AT91_LCDC_VFP (0xff << 0) /* Vertical Front Porch */ -#define AT91_LCDC_VBP (0xff << 8) /* Vertical Back Porch */ -#define AT91_LCDC_VPW (0x3f << 16) /* Vertical Synchronization Pulse Width */ -#define AT91_LCDC_VHDLY (0xf << 24) /* Vertical to Horizontal Delay */ - -#define AT91_LCDC_TIM2 0x080c /* LCD Timing Register 2 */ -#define AT91_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */ -#define AT91_LCDC_HPW (0x3f << 8) /* Horizontal Synchronization Pulse Width */ -#define AT91_LCDC_HFP (0x7ff << 21) /* Horizontal Front Porch */ - -#define AT91_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */ -#define AT91_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */ -#define AT91_LCDC_HOZVAL (0x7ff << 21) /* Horizontal Size of LCD Module */ - -#define AT91_LCDC_FIFO 0x0814 /* LCD FIFO Register */ -#define AT91_LCDC_FIFOTH (0xffff) /* FIFO Threshold */ - -#define AT91_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */ -#define AT91_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */ -#define AT91_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */ -#define AT91_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */ -#define AT91_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */ -#define AT91_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */ -#define AT91_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */ -#define AT91_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */ -#define AT91_LCDC_DP1_2_VAL (0xff) -#define AT91_LCDC_DP4_7_VAL (0xfffffff) -#define AT91_LCDC_DP3_5_VAL (0xfffff) -#define AT91_LCDC_DP2_3_VAL (0xfff) -#define AT91_LCDC_DP5_7_VAL (0xfffffff) -#define AT91_LCDC_DP3_4_VAL (0xffff) -#define AT91_LCDC_DP4_5_VAL (0xfffff) -#define AT91_LCDC_DP6_7_VAL (0xfffffff) - -#define AT91_LCDC_PWRCON 0x083c /* Power Control Register */ -#define AT91_LCDC_PWR (1 << 0) /* LCD Module Power Control */ -#define AT91_LCDC_GUARDT (0x7f << 1) /* Delay in Frame Period */ -#define AT91_LCDC_BUSY (1 << 31) /* LCD Busy */ - -#define AT91_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */ -#define AT91_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */ -#define AT91_LCDC_PS_DIV1 (0 << 0) -#define AT91_LCDC_PS_DIV2 (1 << 0) -#define AT91_LCDC_PS_DIV4 (2 << 0) -#define AT91_LCDC_PS_DIV8 (3 << 0) -#define AT91_LCDC_POL (1 << 2) /* Polarity of output Pulse */ -#define AT91_LCDC_POL_NEGATIVE (0 << 2) -#define AT91_LCDC_POL_POSITIVE (1 << 2) -#define AT91_LCDC_ENA (1 << 3) /* PWM generator Control */ -#define AT91_LCDC_ENA_PWMDISABLE (0 << 3) -#define AT91_LCDC_ENA_PWMENABLE (1 << 3) - -#define AT91_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */ -#define AT91_LCDC_CVAL (0xff) /* PWM compare value */ - -#define AT91_LCDC_IER 0x0848 /* Interrupt Enable Register */ -#define AT91_LCDC_IDR 0x084c /* Interrupt Disable Register */ -#define AT91_LCDC_IMR 0x0850 /* Interrupt Mask Register */ -#define AT91_LCDC_ISR 0x0854 /* Interrupt Enable Register */ -#define AT91_LCDC_ICR 0x0858 /* Interrupt Clear Register */ -#define AT91_LCDC_LNI (1 << 0) /* Line Interrupt */ -#define AT91_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */ -#define AT91_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */ -#define AT91_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */ -#define AT91_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */ -#define AT91_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */ - -#define AT91_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h index 33ff5b6798ee..52cd8e5dabc9 100644 --- a/include/asm-arm/arch-at91/at91_pmc.h +++ b/include/asm-arm/arch-at91/at91_pmc.h @@ -25,6 +25,7 @@ #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ +#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ #define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ #define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ @@ -37,7 +38,9 @@ #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ -#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */ +#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ + +#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */ #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ @@ -52,6 +55,10 @@ #define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ #define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ #define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ +#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ +#define AT91_PMC_USBDIV_1 (0 << 28) +#define AT91_PMC_USBDIV_2 (1 << 28) +#define AT91_PMC_USBDIV_4 (2 << 28) #define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ #define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ diff --git a/include/asm-arm/arch-at91/at91_rtt.h b/include/asm-arm/arch-at91/at91_rtt.h index bae1103fbbb2..39a32633b275 100644 --- a/include/asm-arm/arch-at91/at91_rtt.h +++ b/include/asm-arm/arch-at91/at91_rtt.h @@ -13,19 +13,19 @@ #ifndef AT91_RTT_H #define AT91_RTT_H -#define AT91_RTT_MR (AT91_RTT + 0x00) /* Real-time Mode Register */ +#define AT91_RTT_MR 0x00 /* Real-time Mode Register */ #define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */ #define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */ #define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */ #define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */ -#define AT91_RTT_AR (AT91_RTT + 0x04) /* Real-time Alarm Register */ +#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */ #define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */ -#define AT91_RTT_VR (AT91_RTT + 0x08) /* Real-time Value Register */ +#define AT91_RTT_VR 0x08 /* Real-time Value Register */ #define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */ -#define AT91_RTT_SR (AT91_RTT + 0x0c) /* Real-time Status Register */ +#define AT91_RTT_SR 0x0c /* Real-time Status Register */ #define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */ #define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */ diff --git a/include/asm-arm/arch-at91/at91_twi.h b/include/asm-arm/arch-at91/at91_twi.h index ca9a90733456..f9f2e3cd95c5 100644 --- a/include/asm-arm/arch-at91/at91_twi.h +++ b/include/asm-arm/arch-at91/at91_twi.h @@ -21,6 +21,8 @@ #define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */ #define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */ #define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */ +#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */ +#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */ #define AT91_TWI_SWRST (1 << 7) /* Software Reset */ #define AT91_TWI_MMR 0x04 /* Master Mode Register */ @@ -32,6 +34,9 @@ #define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */ #define AT91_TWI_DADR (0x7f << 16) /* Device Address */ +#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */ +#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */ + #define AT91_TWI_IADR 0x0c /* Internal Address Register */ #define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */ @@ -43,9 +48,15 @@ #define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */ #define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */ #define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */ +#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */ +#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */ +#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */ #define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */ #define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */ #define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */ +#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */ +#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */ +#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */ #define AT91_TWI_IER 0x24 /* Interrupt Enable Register */ #define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */ diff --git a/include/asm-arm/arch-at91/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h new file mode 100644 index 000000000000..73e1fcf4a0aa --- /dev/null +++ b/include/asm-arm/arch-at91/at91cap9.h @@ -0,0 +1,121 @@ +/* + * include/asm-arm/arch-at91/at91cap9.h + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2007 Atmel Corporation. + * + * Common definitions. + * Based on AT91CAP9 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91CAP9_H +#define AT91CAP9_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ +#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ +#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ +#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */ +#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */ +#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */ +#define AT91CAP9_ID_US0 8 /* USART 0 */ +#define AT91CAP9_ID_US1 9 /* USART 1 */ +#define AT91CAP9_ID_US2 10 /* USART 2 */ +#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */ +#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */ +#define AT91CAP9_ID_CAN 13 /* CAN */ +#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */ +#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */ +#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */ +#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */ +#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */ +#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */ +#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */ +#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */ +#define AT91CAP9_ID_EMAC 22 /* Ethernet */ +#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */ +#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */ +#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */ +#define AT91CAP9_ID_LCDC 26 /* LCD Controller */ +#define AT91CAP9_ID_DMA 27 /* DMA Controller */ +#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */ +#define AT91CAP9_ID_UHP 29 /* USB Host Port */ +#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ + +/* + * User Peripheral physical base addresses. + */ +#define AT91CAP9_BASE_UDPHS 0xfff78000 +#define AT91CAP9_BASE_TCB0 0xfff7c000 +#define AT91CAP9_BASE_TC0 0xfff7c000 +#define AT91CAP9_BASE_TC1 0xfff7c040 +#define AT91CAP9_BASE_TC2 0xfff7c080 +#define AT91CAP9_BASE_MCI0 0xfff80000 +#define AT91CAP9_BASE_MCI1 0xfff84000 +#define AT91CAP9_BASE_TWI 0xfff88000 +#define AT91CAP9_BASE_US0 0xfff8c000 +#define AT91CAP9_BASE_US1 0xfff90000 +#define AT91CAP9_BASE_US2 0xfff94000 +#define AT91CAP9_BASE_SSC0 0xfff98000 +#define AT91CAP9_BASE_SSC1 0xfff9c000 +#define AT91CAP9_BASE_AC97C 0xfffa0000 +#define AT91CAP9_BASE_SPI0 0xfffa4000 +#define AT91CAP9_BASE_SPI1 0xfffa8000 +#define AT91CAP9_BASE_CAN 0xfffac000 +#define AT91CAP9_BASE_PWMC 0xfffb8000 +#define AT91CAP9_BASE_EMAC 0xfffbc000 +#define AT91CAP9_BASE_ADC 0xfffc0000 +#define AT91CAP9_BASE_ISI 0xfffc4000 +#define AT91_BASE_SYS 0xffffe200 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) +#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) +#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS) +#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) +#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS) +#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) +#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) + +/* + * Internal Memory. + */ +#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */ +#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */ + +#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */ + +#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */ +#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */ +#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ + +#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 + +#endif diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/include/asm-arm/arch-at91/at91cap9_matrix.h new file mode 100644 index 000000000000..a641686b6c3d --- /dev/null +++ b/include/asm-arm/arch-at91/at91cap9_matrix.h @@ -0,0 +1,132 @@ +/* + * include/asm-arm/arch-at91/at91cap9_matrix.h + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2006 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91CAP9 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91CAP9_MATRIX_H +#define AT91CAP9_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ +#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ +#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ +#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */ +#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */ +#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */ +#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */ +#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ +#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ +#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ +#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ +#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ +#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ +#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) +#define AT91_MATRIX_RCB9 (1 << 9) +#define AT91_MATRIX_RCB10 (1 << 10) +#define AT91_MATRIX_RCB11 (1 << 11) + +#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ +#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) +#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) +#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */ +#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) + +#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */ +#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */ +#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */ + +#endif diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h index aacb1e976422..a8e9fec6c735 100644 --- a/include/asm-arm/arch-at91/at91sam9260_matrix.h +++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h @@ -67,7 +67,7 @@ #define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ #define AT91_MATRIX_CS4A_SMC (0 << 4) #define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ #define AT91_MATRIX_CS5A_SMC (0 << 5) #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h index 6fc6e4be624e..72f6e668e414 100644 --- a/include/asm-arm/arch-at91/at91sam9263_matrix.h +++ b/include/asm-arm/arch-at91/at91sam9263_matrix.h @@ -44,7 +44,7 @@ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) #define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) #define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ #define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) diff --git a/include/asm-arm/arch-at91/at91sam9rl_matrix.h b/include/asm-arm/arch-at91/at91sam9rl_matrix.h index b15f11b7c08d..84224174e6a1 100644 --- a/include/asm-arm/arch-at91/at91sam9rl_matrix.h +++ b/include/asm-arm/arch-at91/at91sam9rl_matrix.h @@ -38,7 +38,7 @@ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) #define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) #define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ #define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index 79054965baa6..55b07bd5316c 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -34,6 +34,7 @@ #include <linux/mtd/partitions.h> #include <linux/device.h> #include <linux/i2c.h> +#include <linux/leds.h> #include <linux/spi/spi.h> /* USB Device */ @@ -71,7 +72,7 @@ struct at91_eth_data { }; extern void __init at91_add_device_eth(struct at91_eth_data *data); -#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) +#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) #define eth_platform_data at91_eth_data #endif @@ -101,13 +102,23 @@ extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_de extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices); /* Serial */ +#define ATMEL_UART_CTS 0x01 +#define ATMEL_UART_RTS 0x02 +#define ATMEL_UART_DSR 0x04 +#define ATMEL_UART_DTR 0x08 +#define ATMEL_UART_DCD 0x10 +#define ATMEL_UART_RI 0x20 + +extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); +extern void __init at91_set_serial_console(unsigned portnr); + struct at91_uart_config { unsigned short console_tty; /* tty number of serial console */ unsigned short nr_tty; /* number of serial tty's */ short tty_map[]; /* map UART to tty number */ }; extern struct platform_device *atmel_default_console_device; -extern void __init at91_init_serial(struct at91_uart_config *config); +extern void __init __deprecated at91_init_serial(struct at91_uart_config *config); struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */ @@ -116,6 +127,23 @@ struct atmel_uart_data { }; extern void __init at91_add_device_serial(void); +/* + * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC + * platform devices. Their SSC ID is part of their configuration data, + * along with information about which SSC signals they should use. + */ +#define ATMEL_SSC_TK 0x01 +#define ATMEL_SSC_TF 0x02 +#define ATMEL_SSC_TD 0x04 +#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) + +#define ATMEL_SSC_RK 0x10 +#define ATMEL_SSC_RF 0x20 +#define ATMEL_SSC_RD 0x40 +#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) + +extern void __init at91_add_device_ssc(unsigned id, unsigned pins); + /* LCD Controller */ struct atmel_lcdfb_info; extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data); @@ -126,10 +154,12 @@ struct atmel_ac97_data { }; extern void __init at91_add_device_ac97(struct atmel_ac97_data *data); + /* ISI */ +extern void __init at91_add_device_isi(void); + /* LEDs */ -extern u8 at91_leds_cpu; -extern u8 at91_leds_timer; extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); +extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); /* FIXME: this needs a better location, but gets stuff building again */ extern int at91_suspend_entering_slow_clock(void); diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h index 080cbb401a87..7145166826a2 100644 --- a/include/asm-arm/arch-at91/cpu.h +++ b/include/asm-arm/arch-at91/cpu.h @@ -21,13 +21,13 @@ #define ARCH_ID_AT91SAM9260 0x019803a0 #define ARCH_ID_AT91SAM9261 0x019703a0 #define ARCH_ID_AT91SAM9263 0x019607a0 +#define ARCH_ID_AT91SAM9RL64 0x019b03a0 +#define ARCH_ID_AT91CAP9 0x039A03A0 #define ARCH_ID_AT91SAM9XE128 0x329973a0 #define ARCH_ID_AT91SAM9XE256 0x329a93a0 #define ARCH_ID_AT91SAM9XE512 0x329aa3a0 -#define ARCH_ID_AT91SAM9RL64 0x019b03a0 - #define ARCH_ID_AT91M40800 0x14080044 #define ARCH_ID_AT91R40807 0x44080746 #define ARCH_ID_AT91M40807 0x14080745 @@ -81,6 +81,11 @@ static inline unsigned long at91_arch_identify(void) #define cpu_is_at91sam9rl() (0) #endif +#ifdef CONFIG_ARCH_AT91CAP9 +#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) +#else +#define cpu_is_at91cap9() (0) +#endif /* * Since this is ARM, we will never run on any AVR32 CPU. But these diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S index cc1d850a0788..1005eee6219b 100644 --- a/include/asm-arm/arch-at91/entry-macro.S +++ b/include/asm-arm/arch-at91/entry-macro.S @@ -17,13 +17,13 @@ .endm .macro get_irqnr_preamble, base, tmp + ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h index 8f1cdd38a969..2c826d8247a3 100644 --- a/include/asm-arm/arch-at91/hardware.h +++ b/include/asm-arm/arch-at91/hardware.h @@ -26,6 +26,8 @@ #include <asm/arch/at91sam9263.h> #elif defined(CONFIG_ARCH_AT91SAM9RL) #include <asm/arch/at91sam9rl.h> +#elif defined(CONFIG_ARCH_AT91CAP9) +#include <asm/arch/at91cap9.h> #elif defined(CONFIG_ARCH_AT91X40) #include <asm/arch/at91x40.h> #else diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h index a310698fb4da..f1933b0fa43f 100644 --- a/include/asm-arm/arch-at91/timex.h +++ b/include/asm-arm/arch-at91/timex.h @@ -42,6 +42,11 @@ #define AT91SAM9_MASTER_CLOCK 100000000 #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) +#elif defined(CONFIG_ARCH_AT91CAP9) + +#define AT91CAP9_MASTER_CLOCK 100000000 +#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16) + #elif defined(CONFIG_ARCH_AT91X40) #define AT91X40_MASTER_CLOCK 40000000 diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h index 1ee14a14cba0..9b1864bbd9a8 100644 --- a/include/asm-arm/arch-ep93xx/gpio.h +++ b/include/asm-arm/arch-ep93xx/gpio.h @@ -5,16 +5,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H -#define GPIO_IN 0 -#define GPIO_OUT 1 - -#define EP93XX_GPIO_LOW 0 -#define EP93XX_GPIO_HIGH 1 - -extern void gpio_line_config(int line, int direction); -extern int gpio_line_get(int line); -extern void gpio_line_set(int line, int value); - /* GPIO port A. */ #define EP93XX_GPIO_LINE_A(x) ((x) + 0) #define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) @@ -38,7 +28,7 @@ extern void gpio_line_set(int line, int value); #define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) /* GPIO port C. */ -#define EP93XX_GPIO_LINE_C(x) ((x) + 16) +#define EP93XX_GPIO_LINE_C(x) ((x) + 40) #define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) #define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) #define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) @@ -71,7 +61,7 @@ extern void gpio_line_set(int line, int value); #define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) /* GPIO port F. */ -#define EP93XX_GPIO_LINE_F(x) ((x) + 40) +#define EP93XX_GPIO_LINE_F(x) ((x) + 16) #define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) #define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) #define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) @@ -103,5 +93,49 @@ extern void gpio_line_set(int line, int value); #define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) #define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) +/* maximum value for gpio line identifiers */ +#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) + +/* maximum value for irq capable line identifiers */ +#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) + +/* new generic GPIO API - see Documentation/gpio.txt */ + +static inline int gpio_request(unsigned gpio, const char *label) +{ + if (gpio > EP93XX_GPIO_LINE_MAX) + return -EINVAL; + return 0; +} + +static inline void gpio_free(unsigned gpio) +{ +} + +int gpio_direction_input(unsigned gpio); +int gpio_direction_output(unsigned gpio, int value); +int gpio_get_value(unsigned gpio); +void gpio_set_value(unsigned gpio, int value); + +#include <asm-generic/gpio.h> /* cansleep wrappers */ + +/* + * Map GPIO A0..A7 (0..7) to irq 64..71, + * B0..B7 (7..15) to irq 72..79, and + * F0..F7 (16..24) to irq 80..87. + */ + +static inline int gpio_to_irq(unsigned gpio) +{ + if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ) + return 64 + gpio; + + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return irq - gpio_to_irq(0); +} #endif diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h index 2a8c63638c5e..53d4a68bfc88 100644 --- a/include/asm-arm/arch-ep93xx/irqs.h +++ b/include/asm-arm/arch-ep93xx/irqs.h @@ -67,12 +67,6 @@ #define IRQ_EP93XX_SAI 60 #define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff -/* - * Map GPIO A0..A7 to irq 64..71, B0..B7 to 72..79, and - * F0..F7 to 80..87. - */ -#define IRQ_EP93XX_GPIO(x) (64 + (((x) + (((x) >> 2) & 8)) & 0x1f)) - #define NR_EP93XX_IRQS (64 + 24) #define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x)) diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h index eeeea90cd5a9..9c5d2357aff3 100644 --- a/include/asm-arm/arch-ixp4xx/io.h +++ b/include/asm-arm/arch-ixp4xx/io.h @@ -61,13 +61,13 @@ __ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype) if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff)) return __arm_ioremap(addr, size, mtype); - return (void *)addr; + return (void __iomem *)addr; } static inline void __ixp4xx_iounmap(void __iomem *addr) { - if ((u32)addr >= VMALLOC_START) + if ((__force u32)addr >= VMALLOC_START) __iounmap(addr); } @@ -141,9 +141,9 @@ __ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count) static inline void __ixp4xx_writel(u32 value, volatile void __iomem *p) { - u32 addr = (u32)p; + u32 addr = (__force u32)p; if (addr >= VMALLOC_START) { - __raw_writel(value, addr); + __raw_writel(value, p); return; } @@ -208,11 +208,11 @@ __ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count) static inline unsigned long __ixp4xx_readl(const volatile void __iomem *p) { - u32 addr = (u32)p; + u32 addr = (__force u32)p; u32 data; if (addr >= VMALLOC_START) - return __raw_readl(addr); + return __raw_readl(p); if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data)) return 0xffffffff; @@ -438,7 +438,7 @@ __ixp4xx_ioread32(const void __iomem *addr) return (unsigned int)__ixp4xx_inl(port & PIO_MASK); else { #ifndef CONFIG_IXP4XX_INDIRECT_PCI - return le32_to_cpu(__raw_readl((u32)port)); + return le32_to_cpu((__force __le32)__raw_readl(addr)); #else return (unsigned int)__ixp4xx_readl(addr); #endif @@ -523,7 +523,7 @@ __ixp4xx_iowrite32(u32 value, void __iomem *addr) __ixp4xx_outl(value, port & PIO_MASK); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writel(cpu_to_le32(value), port); + __raw_writel((u32 __force)cpu_to_le32(value), addr); #else __ixp4xx_writel(value, addr); #endif diff --git a/include/asm-arm/arch-ks8695/regs-gpio.h b/include/asm-arm/arch-ks8695/regs-gpio.h index 57fcf9fc82e4..6b95d77aea19 100644 --- a/include/asm-arm/arch-ks8695/regs-gpio.h +++ b/include/asm-arm/arch-ks8695/regs-gpio.h @@ -49,5 +49,7 @@ #define IOPC_TM_FALLING (4) /* Falling Edge Detection */ #define IOPC_TM_EDGE (6) /* Both Edge Detection */ +/* Port Data Register */ +#define IOPD_(x) (1 << (x)) /* Signal Level of GPIO Pin x */ #endif diff --git a/include/asm-arm/arch-msm/board.h b/include/asm-arm/arch-msm/board.h new file mode 100644 index 000000000000..763051f8ba14 --- /dev/null +++ b/include/asm-arm/arch-msm/board.h @@ -0,0 +1,37 @@ +/* linux/include/asm-arm/arch-msm/board.h + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_BOARD_H +#define __ASM_ARCH_MSM_BOARD_H + +#include <linux/types.h> + +/* platform device data structures */ + +struct msm_mddi_platform_data +{ + void (*panel_power)(int on); + unsigned has_vsync_irq:1; +}; + +/* common init routines for use by arch/arm/mach-msm/board-*.c */ + +void __init msm_add_devices(void); +void __init msm_map_common_io(void); +void __init msm_init_irq(void); +void __init msm_init_gpio(void); + +#endif diff --git a/include/asm-arm/arch-msm/debug-macro.S b/include/asm-arm/arch-msm/debug-macro.S new file mode 100644 index 000000000000..393d5272e506 --- /dev/null +++ b/include/asm-arm/arch-msm/debug-macro.S @@ -0,0 +1,40 @@ +/* include/asm-arm/arch-msm7200/debug-macro.S + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <asm/hardware.h> +#include <asm/arch/msm_iomap.h> + + .macro addruart,rx + @ see if the MMU is enabled and select appropriate base address + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, =MSM_UART1_PHYS + ldrne \rx, =MSM_UART1_BASE + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0x0C] + .endm + + .macro waituart,rd,rx + @ wait for TX_READY +1: ldr \rd, [\rx, #0x08] + tst \rd, #0x04 + beq 1b + .endm + + .macro busyuart,rd,rx + .endm diff --git a/include/asm-arm/arch-msm/dma.h b/include/asm-arm/arch-msm/dma.h new file mode 100644 index 000000000000..e4b565b27b35 --- /dev/null +++ b/include/asm-arm/arch-msm/dma.h @@ -0,0 +1,151 @@ +/* linux/include/asm-arm/arch-msm/dma.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_DMA_H + +#include <linux/list.h> +#include <asm/arch/msm_iomap.h> + +struct msm_dmov_cmd { + struct list_head list; + unsigned int cmdptr; + void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result); +/* void (*user_result_func)(struct msm_dmov_cmd *cmd); */ +}; + +void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd); +void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd); +int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr); +/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */ + + + +#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2)) +#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2)) +#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2)) +#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2)) + +/* only security domain 3 is available to the ARM11 + * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM + */ + +#define DMOV_CMD_PTR(ch) DMOV_SD3(0x000, ch) +#define DMOV_CMD_LIST (0 << 29) /* does not work */ +#define DMOV_CMD_PTR_LIST (1 << 29) /* works */ +#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */ +#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */ +#define DMOV_CMD_ADDR(addr) ((addr) >> 3) + +#define DMOV_RSLT(ch) DMOV_SD3(0x040, ch) +#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */ +#define DMOV_RSLT_ERROR (1 << 3) +#define DMOV_RSLT_FLUSH (1 << 2) +#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */ +#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */ + +#define DMOV_FLUSH0(ch) DMOV_SD3(0x080, ch) +#define DMOV_FLUSH1(ch) DMOV_SD3(0x0C0, ch) +#define DMOV_FLUSH2(ch) DMOV_SD3(0x100, ch) +#define DMOV_FLUSH3(ch) DMOV_SD3(0x140, ch) +#define DMOV_FLUSH4(ch) DMOV_SD3(0x180, ch) +#define DMOV_FLUSH5(ch) DMOV_SD3(0x1C0, ch) + +#define DMOV_STATUS(ch) DMOV_SD3(0x200, ch) +#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29)) +#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3) +#define DMOV_STATUS_RSLT_VALID (1 << 1) +#define DMOV_STATUS_CMD_PTR_RDY (1 << 0) + +#define DMOV_ISR DMOV_SD3(0x380, 0) + +#define DMOV_CONFIG(ch) DMOV_SD3(0x300, ch) +#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2) +#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1) +#define DMOV_CONFIG_IRQ_EN (1 << 0) + +/* channel assignments */ + +#define DMOV_NAND_CHAN 7 +#define DMOV_NAND_CRCI_CMD 5 +#define DMOV_NAND_CRCI_DATA 4 + +#define DMOV_SDC1_CHAN 8 +#define DMOV_SDC1_CRCI 6 + +#define DMOV_SDC2_CHAN 8 +#define DMOV_SDC2_CRCI 7 + +#define DMOV_TSIF_CHAN 10 +#define DMOV_TSIF_CRCI 10 + +#define DMOV_USB_CHAN 11 + +/* no client rate control ifc (eg, ram) */ +#define DMOV_NONE_CRCI 0 + + +/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover + * is going to walk a list of 32bit pointers as described below. Each + * pointer points to a *array* of dmov_s, etc structs. The last pointer + * in the list is marked with CMD_PTR_LP. The last struct in each array + * is marked with CMD_LC (see below). + */ +#define CMD_PTR_ADDR(addr) ((addr) >> 3) +#define CMD_PTR_LP (1 << 31) /* last pointer */ +#define CMD_PTR_PT (3 << 29) /* ? */ + +/* Single Item Mode */ +typedef struct { + unsigned cmd; + unsigned src; + unsigned dst; + unsigned len; +} dmov_s; + +/* Scatter/Gather Mode */ +typedef struct { + unsigned cmd; + unsigned src_dscr; + unsigned dst_dscr; + unsigned _reserved; +} dmov_sg; + +/* bits for the cmd field of the above structures */ + +#define CMD_LC (1 << 31) /* last command */ +#define CMD_FR (1 << 22) /* force result -- does not work? */ +#define CMD_OCU (1 << 21) /* other channel unblock */ +#define CMD_OCB (1 << 20) /* other channel block */ +#define CMD_TCB (1 << 19) /* ? */ +#define CMD_DAH (1 << 18) /* destination address hold -- does not work?*/ +#define CMD_SAH (1 << 17) /* source address hold -- does not work? */ + +#define CMD_MODE_SINGLE (0 << 0) /* dmov_s structure used */ +#define CMD_MODE_SG (1 << 0) /* untested */ +#define CMD_MODE_IND_SG (2 << 0) /* untested */ +#define CMD_MODE_BOX (3 << 0) /* untested */ + +#define CMD_DST_SWAP_BYTES (1 << 14) /* exchange each byte n with byte n+1 */ +#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */ +#define CMD_DST_SWAP_WORDS (1 << 16) /* exchange each word n with word n+1 */ + +#define CMD_SRC_SWAP_BYTES (1 << 11) /* exchange each byte n with byte n+1 */ +#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */ +#define CMD_SRC_SWAP_WORDS (1 << 13) /* exchange each word n with word n+1 */ + +#define CMD_DST_CRCI(n) (((n) & 15) << 7) +#define CMD_SRC_CRCI(n) (((n) & 15) << 3) + +#endif diff --git a/include/asm-arm/arch-msm/entry-macro.S b/include/asm-arm/arch-msm/entry-macro.S new file mode 100644 index 000000000000..ee24aece4cb0 --- /dev/null +++ b/include/asm-arm/arch-msm/entry-macro.S @@ -0,0 +1,38 @@ +/* include/asm-arm/arch-msm7200/entry-macro.S + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <asm/arch/msm_iomap.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + @ enable imprecise aborts + cpsie a + mov \base, #MSM_VIC_BASE + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + @ 0xD0 has irq# or old irq# if the irq has been handled + @ 0xD4 has irq# or -1 if none pending *but* if you just + @ read 0xD4 you never get the first irq for some reason + ldr \irqnr, [\base, #0xD0] + ldr \irqnr, [\base, #0xD4] + cmp \irqnr, #0xffffffff + .endm diff --git a/include/asm-arm/arch-msm/hardware.h b/include/asm-arm/arch-msm/hardware.h new file mode 100644 index 000000000000..89af2b70182f --- /dev/null +++ b/include/asm-arm/arch-msm/hardware.h @@ -0,0 +1,18 @@ +/* linux/include/asm-arm/arch-msm/hardware.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_HARDWARE_H + +#endif diff --git a/include/asm-arm/arch-msm/io.h b/include/asm-arm/arch-msm/io.h new file mode 100644 index 000000000000..4645ae26b62a --- /dev/null +++ b/include/asm-arm/arch-msm/io.h @@ -0,0 +1,33 @@ +/* include/asm-arm/arch-msm/io.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __arch_ioremap __msm_ioremap +#define __arch_iounmap __iounmap + +void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype); + +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)addr; +} +#define __io(a) __io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/include/asm-arm/arch-msm/irqs.h b/include/asm-arm/arch-msm/irqs.h new file mode 100644 index 000000000000..565430cfaa7e --- /dev/null +++ b/include/asm-arm/arch-msm/irqs.h @@ -0,0 +1,89 @@ +/* linux/include/asm-arm/arch-msm/irqs.h + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_IRQS_H + +/* MSM ARM11 Interrupt Numbers */ +/* See 80-VE113-1 A, pp219-221 */ + +#define INT_A9_M2A_0 0 +#define INT_A9_M2A_1 1 +#define INT_A9_M2A_2 2 +#define INT_A9_M2A_3 3 +#define INT_A9_M2A_4 4 +#define INT_A9_M2A_5 5 +#define INT_A9_M2A_6 6 +#define INT_GP_TIMER_EXP 7 +#define INT_DEBUG_TIMER_EXP 8 +#define INT_UART1 9 +#define INT_UART2 10 +#define INT_UART3 11 +#define INT_UART1_RX 12 +#define INT_UART2_RX 13 +#define INT_UART3_RX 14 +#define INT_USB_OTG 15 +#define INT_MDDI_PRI 16 +#define INT_MDDI_EXT 17 +#define INT_MDDI_CLIENT 18 +#define INT_MDP 19 +#define INT_GRAPHICS 20 +#define INT_ADM_AARM 21 +#define INT_ADSP_A11 22 +#define INT_ADSP_A9_A11 23 +#define INT_SDC1_0 24 +#define INT_SDC1_1 25 +#define INT_SDC2_0 26 +#define INT_SDC2_1 27 +#define INT_KEYSENSE 28 +#define INT_TCHSCRN_SSBI 29 +#define INT_TCHSCRN1 30 +#define INT_TCHSCRN2 31 + +#define INT_GPIO_GROUP1 (32 + 0) +#define INT_GPIO_GROUP2 (32 + 1) +#define INT_PWB_I2C (32 + 2) +#define INT_SOFTRESET (32 + 3) +#define INT_NAND_WR_ER_DONE (32 + 4) +#define INT_NAND_OP_DONE (32 + 5) +#define INT_PBUS_ARM11 (32 + 6) +#define INT_AXI_MPU_SMI (32 + 7) +#define INT_AXI_MPU_EBI1 (32 + 8) +#define INT_AD_HSSD (32 + 9) +#define INT_ARM11_PMU (32 + 10) +#define INT_ARM11_DMA (32 + 11) +#define INT_TSIF_IRQ (32 + 12) +#define INT_UART1DM_IRQ (32 + 13) +#define INT_UART1DM_RX (32 + 14) +#define INT_USB_HS (32 + 15) +#define INT_SDC3_0 (32 + 16) +#define INT_SDC3_1 (32 + 17) +#define INT_SDC4_0 (32 + 18) +#define INT_SDC4_1 (32 + 19) +#define INT_UART2DM_RX (32 + 20) +#define INT_UART2DM_IRQ (32 + 21) + +/* 22-31 are reserved */ + +#define MSM_IRQ_BIT(irq) (1 << ((irq) & 31)) + +#define NR_MSM_IRQS 64 +#define NR_GPIO_IRQS 122 +#define NR_BOARD_IRQS 64 +#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS) + +#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n)) + +#endif diff --git a/include/asm-arm/arch-msm/memory.h b/include/asm-arm/arch-msm/memory.h new file mode 100644 index 000000000000..b5ce0e9ac86d --- /dev/null +++ b/include/asm-arm/arch-msm/memory.h @@ -0,0 +1,27 @@ +/* linux/include/asm-arm/arch-msm/memory.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* physical offset of RAM */ +#define PHYS_OFFSET UL(0x10000000) + +/* bus address and physical addresses are identical */ +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#endif + diff --git a/include/asm-arm/arch-msm/msm_iomap.h b/include/asm-arm/arch-msm/msm_iomap.h new file mode 100644 index 000000000000..b8955cc26fec --- /dev/null +++ b/include/asm-arm/arch-msm/msm_iomap.h @@ -0,0 +1,104 @@ +/* linux/include/asm-arm/arch-msm/msm_iomap.h + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * The MSM peripherals are spread all over across 768MB of physical + * space, which makes just having a simple IO_ADDRESS macro to slide + * them into the right virtual location rough. Instead, we will + * provide a master phys->virt mapping for peripherals here. + * + */ + +#ifndef __ASM_ARCH_MSM_IOMAP_H +#define __ASM_ARCH_MSM_IOMAP_H + +#include <asm/sizes.h> + +/* Physical base address and size of peripherals. + * Ordered by the virtual base addresses they will be mapped at. + * + * MSM_VIC_BASE must be an value that can be loaded via a "mov" + * instruction, otherwise entry-macro.S will not compile. + * + * If you add or remove entries here, you'll want to edit the + * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your + * changes. + * + */ + +#define MSM_VIC_BASE 0xE0000000 +#define MSM_VIC_PHYS 0xC0000000 +#define MSM_VIC_SIZE SZ_4K + +#define MSM_CSR_BASE 0xE0001000 +#define MSM_CSR_PHYS 0xC0100000 +#define MSM_CSR_SIZE SZ_4K + +#define MSM_GPT_PHYS MSM_CSR_PHYS +#define MSM_GPT_BASE MSM_CSR_BASE +#define MSM_GPT_SIZE SZ_4K + +#define MSM_DMOV_BASE 0xE0002000 +#define MSM_DMOV_PHYS 0xA9700000 +#define MSM_DMOV_SIZE SZ_4K + +#define MSM_UART1_BASE 0xE0003000 +#define MSM_UART1_PHYS 0xA9A00000 +#define MSM_UART1_SIZE SZ_4K + +#define MSM_UART2_BASE 0xE0004000 +#define MSM_UART2_PHYS 0xA9B00000 +#define MSM_UART2_SIZE SZ_4K + +#define MSM_UART3_BASE 0xE0005000 +#define MSM_UART3_PHYS 0xA9C00000 +#define MSM_UART3_SIZE SZ_4K + +#define MSM_I2C_BASE 0xE0006000 +#define MSM_I2C_PHYS 0xA9900000 +#define MSM_I2C_SIZE SZ_4K + +#define MSM_GPIO1_BASE 0xE0007000 +#define MSM_GPIO1_PHYS 0xA9200000 +#define MSM_GPIO1_SIZE SZ_4K + +#define MSM_GPIO2_BASE 0xE0008000 +#define MSM_GPIO2_PHYS 0xA9300000 +#define MSM_GPIO2_SIZE SZ_4K + +#define MSM_HSUSB_BASE 0xE0009000 +#define MSM_HSUSB_PHYS 0xA0800000 +#define MSM_HSUSB_SIZE SZ_4K + +#define MSM_CLK_CTL_BASE 0xE000A000 +#define MSM_CLK_CTL_PHYS 0xA8600000 +#define MSM_CLK_CTL_SIZE SZ_4K + +#define MSM_PMDH_BASE 0xE000B000 +#define MSM_PMDH_PHYS 0xAA600000 +#define MSM_PMDH_SIZE SZ_4K + +#define MSM_EMDH_BASE 0xE000C000 +#define MSM_EMDH_PHYS 0xAA700000 +#define MSM_EMDH_SIZE SZ_4K + +#define MSM_MDP_BASE 0xE0010000 +#define MSM_MDP_PHYS 0xAA200000 +#define MSM_MDP_SIZE 0x000F0000 + +#define MSM_SHARED_RAM_BASE 0xE0100000 +#define MSM_SHARED_RAM_PHYS 0x01F00000 +#define MSM_SHARED_RAM_SIZE SZ_1M + +#endif diff --git a/include/asm-arm/arch-msm/system.h b/include/asm-arm/arch-msm/system.h new file mode 100644 index 000000000000..7c5544bdd0c7 --- /dev/null +++ b/include/asm-arm/arch-msm/system.h @@ -0,0 +1,23 @@ +/* linux/include/asm-arm/arch-msm/system.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <asm/hardware.h> + +void arch_idle(void); + +static inline void arch_reset(char mode) +{ + for (;;) ; /* depends on IPC w/ other core */ +} diff --git a/include/asm-arm/arch-msm/timex.h b/include/asm-arm/arch-msm/timex.h new file mode 100644 index 000000000000..154b23fb3599 --- /dev/null +++ b/include/asm-arm/arch-msm/timex.h @@ -0,0 +1,20 @@ +/* linux/include/asm-arm/arch-msm/timex.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_TIMEX_H + +#define CLOCK_TICK_RATE 1000000 + +#endif diff --git a/include/asm-arm/arch-msm/uncompress.h b/include/asm-arm/arch-msm/uncompress.h new file mode 100644 index 000000000000..e91ed786ffec --- /dev/null +++ b/include/asm-arm/arch-msm/uncompress.h @@ -0,0 +1,36 @@ +/* linux/include/asm-arm/arch-msm/uncompress.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H + +#include "hardware.h" + +static void putc(int c) +{ +} + +static inline void flush(void) +{ +} + +static inline void arch_decomp_setup(void) +{ +} + +static inline void arch_decomp_wdog(void) +{ +} + +#endif diff --git a/include/asm-arm/arch-msm/vmalloc.h b/include/asm-arm/arch-msm/vmalloc.h new file mode 100644 index 000000000000..60f8d910e825 --- /dev/null +++ b/include/asm-arm/arch-msm/vmalloc.h @@ -0,0 +1,22 @@ +/* linux/include/asm-arm/arch-msm/vmalloc.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_VMALLOC_H +#define __ASM_ARCH_MSM_VMALLOC_H + +#define VMALLOC_END (PAGE_OFFSET + 0x10000000) + +#endif + diff --git a/include/asm-arm/arch-orion/debug-macro.S b/include/asm-arm/arch-orion/debug-macro.S new file mode 100644 index 000000000000..e2a80641f214 --- /dev/null +++ b/include/asm-arm/arch-orion/debug-macro.S @@ -0,0 +1,17 @@ +/* + * linux/include/asm-arm/arch-orion/debug-macro.S + * + * Debugging macro include header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + + .macro addruart,rx + mov \rx, #0xf1000000 + orr \rx, \rx, #0x00012000 + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/include/asm-arm/arch-orion/dma.h b/include/asm-arm/arch-orion/dma.h new file mode 100644 index 000000000000..40a8c178f10d --- /dev/null +++ b/include/asm-arm/arch-orion/dma.h @@ -0,0 +1 @@ +/* empty */ diff --git a/include/asm-arm/arch-orion/entry-macro.S b/include/asm-arm/arch-orion/entry-macro.S new file mode 100644 index 000000000000..b76075a7e44b --- /dev/null +++ b/include/asm-arm/arch-orion/entry-macro.S @@ -0,0 +1,31 @@ +/* + * include/asm-arm/arch-orion/entry-macro.S + * + * Low-level IRQ helper macros for Orion platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/arch/orion.h> + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =MAIN_IRQ_CAUSE + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqstat, [\base, #0] @ main cause + ldr \tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask + mov \irqnr, #0 @ default irqnr + @ find cause bits that are unmasked + ands \irqstat, \irqstat, \tmp @ clear Z flag if any + clzne \irqnr, \irqstat @ calc irqnr + rsbne \irqnr, \irqnr, #31 + .endm diff --git a/include/asm-arm/arch-orion/gpio.h b/include/asm-arm/arch-orion/gpio.h new file mode 100644 index 000000000000..d66284f9a14c --- /dev/null +++ b/include/asm-arm/arch-orion/gpio.h @@ -0,0 +1,28 @@ +/* + * include/asm-arm/arch-orion/gpio.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +extern int gpio_request(unsigned pin, const char *label); +extern void gpio_free(unsigned pin); +extern int gpio_direction_input(unsigned pin); +extern int gpio_direction_output(unsigned pin, int value); +extern int gpio_get_value(unsigned pin); +extern void gpio_set_value(unsigned pin, int value); +extern void orion_gpio_set_blink(unsigned pin, int blink); +extern void gpio_display(void); /* debug */ + +static inline int gpio_to_irq(int pin) +{ + return pin + IRQ_ORION_GPIO_START; +} + +static inline int irq_to_gpio(int irq) +{ + return irq - IRQ_ORION_GPIO_START; +} + +#include <asm-generic/gpio.h> /* cansleep wrappers */ diff --git a/include/asm-arm/arch-orion/hardware.h b/include/asm-arm/arch-orion/hardware.h new file mode 100644 index 000000000000..8a12d213fbdc --- /dev/null +++ b/include/asm-arm/arch-orion/hardware.h @@ -0,0 +1,24 @@ +/* + * include/asm-arm/arch-orion/hardware.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __ASM_ARCH_HARDWARE_H__ +#define __ASM_ARCH_HARDWARE_H__ + +#include "orion.h" + +#define PCI_MEMORY_VADDR ORION_PCI_SYS_MEM_BASE +#define PCI_IO_VADDR ORION_PCI_SYS_IO_BASE + +#define pcibios_assign_all_busses() 1 + +#define PCIBIOS_MIN_IO 0x1000 +#define PCIBIOS_MIN_MEM 0x01000000 +#define PCIMEM_BASE PCI_MEMORY_VADDR /* mem base for VGA */ + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-orion/io.h b/include/asm-arm/arch-orion/io.h new file mode 100644 index 000000000000..e0b8c39b9167 --- /dev/null +++ b/include/asm-arm/arch-orion/io.h @@ -0,0 +1,27 @@ +/* + * include/asm-arm/arch-orion/io.h + * + * Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#include "orion.h" + +#define IO_SPACE_LIMIT 0xffffffff +#define IO_SPACE_REMAP ORION_PCI_SYS_IO_BASE + +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)addr; +} + +#define __io(a) __io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/include/asm-arm/arch-orion/irqs.h b/include/asm-arm/arch-orion/irqs.h new file mode 100644 index 000000000000..eea65ca6076a --- /dev/null +++ b/include/asm-arm/arch-orion/irqs.h @@ -0,0 +1,61 @@ +/* + * include/asm-arm/arch-orion/irqs.h + * + * IRQ definitions for Orion SoC + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IRQS_H__ +#define __ASM_ARCH_IRQS_H__ + +#include "orion.h" /* need GPIO_MAX */ + +/* + * Orion Main Interrupt Controller + */ +#define IRQ_ORION_BRIDGE 0 +#define IRQ_ORION_DOORBELL_H2C 1 +#define IRQ_ORION_DOORBELL_C2H 2 +#define IRQ_ORION_UART0 3 +#define IRQ_ORION_UART1 4 +#define IRQ_ORION_I2C 5 +#define IRQ_ORION_GPIO_0_7 6 +#define IRQ_ORION_GPIO_8_15 7 +#define IRQ_ORION_GPIO_16_23 8 +#define IRQ_ORION_GPIO_24_31 9 +#define IRQ_ORION_PCIE0_ERR 10 +#define IRQ_ORION_PCIE0_INT 11 +#define IRQ_ORION_USB1_CTRL 12 +#define IRQ_ORION_DEV_BUS_ERR 14 +#define IRQ_ORION_PCI_ERR 15 +#define IRQ_ORION_USB_BR_ERR 16 +#define IRQ_ORION_USB0_CTRL 17 +#define IRQ_ORION_ETH_RX 18 +#define IRQ_ORION_ETH_TX 19 +#define IRQ_ORION_ETH_MISC 20 +#define IRQ_ORION_ETH_SUM 21 +#define IRQ_ORION_ETH_ERR 22 +#define IRQ_ORION_IDMA_ERR 23 +#define IRQ_ORION_IDMA_0 24 +#define IRQ_ORION_IDMA_1 25 +#define IRQ_ORION_IDMA_2 26 +#define IRQ_ORION_IDMA_3 27 +#define IRQ_ORION_CESA 28 +#define IRQ_ORION_SATA 29 +#define IRQ_ORION_XOR0 30 +#define IRQ_ORION_XOR1 31 + +/* + * Orion General Purpose Pins + */ +#define IRQ_ORION_GPIO_START 32 +#define NR_GPIO_IRQS GPIO_MAX + +#define NR_IRQS (IRQ_ORION_GPIO_START + NR_GPIO_IRQS) + +#endif /* __ASM_ARCH_IRQS_H__ */ diff --git a/include/asm-arm/arch-orion/memory.h b/include/asm-arm/arch-orion/memory.h new file mode 100644 index 000000000000..d954dba87ced --- /dev/null +++ b/include/asm-arm/arch-orion/memory.h @@ -0,0 +1,15 @@ +/* + * include/asm-arm/arch-orion/memory.h + * + * Marvell Orion memory definitions + */ + +#ifndef __ASM_ARCH_MMU_H +#define __ASM_ARCH_MMU_H + +#define PHYS_OFFSET UL(0x00000000) + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#endif diff --git a/include/asm-arm/arch-orion/orion.h b/include/asm-arm/arch-orion/orion.h new file mode 100644 index 000000000000..f787f752e58c --- /dev/null +++ b/include/asm-arm/arch-orion/orion.h @@ -0,0 +1,143 @@ +/* + * include/asm-arm/arch-orion/orion.h + * + * Generic definitions of Orion SoC flavors: + * Orion-1, Orion-NAS, Orion-VoIP, and Orion-2. + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_ORION_H__ +#define __ASM_ARCH_ORION_H__ + +/******************************************************************************* + * Orion Address Map + * Use the same mapping (1:1 virtual:physical) of internal registers and + * PCI system (PCI+PCIE) for all machines. + * Each machine defines the rest of its mapping (e.g. device bus flashes) + ******************************************************************************/ +#define ORION_REGS_BASE 0xf1000000 +#define ORION_REGS_SIZE SZ_1M + +#define ORION_PCI_SYS_MEM_BASE 0xe0000000 +#define ORION_PCIE_MEM_BASE ORION_PCI_SYS_MEM_BASE +#define ORION_PCIE_MEM_SIZE SZ_128M +#define ORION_PCI_MEM_BASE (ORION_PCIE_MEM_BASE + ORION_PCIE_MEM_SIZE) +#define ORION_PCI_MEM_SIZE SZ_128M + +#define ORION_PCI_SYS_IO_BASE 0xf2000000 +#define ORION_PCIE_IO_BASE ORION_PCI_SYS_IO_BASE +#define ORION_PCIE_IO_SIZE SZ_1M +#define ORION_PCIE_IO_REMAP (ORION_PCIE_IO_BASE - ORION_PCI_SYS_IO_BASE) +#define ORION_PCI_IO_BASE (ORION_PCIE_IO_BASE + ORION_PCIE_IO_SIZE) +#define ORION_PCI_IO_SIZE SZ_1M +#define ORION_PCI_IO_REMAP (ORION_PCI_IO_BASE - ORION_PCI_SYS_IO_BASE) +/* Relevant only for Orion-NAS */ +#define ORION_PCIE_WA_BASE 0xf0000000 +#define ORION_PCIE_WA_SIZE SZ_16M + +/******************************************************************************* + * Supported Devices & Revisions + ******************************************************************************/ +/* Orion-1 (88F5181) */ +#define MV88F5181_DEV_ID 0x5181 +#define MV88F5181_REV_B1 3 +/* Orion-NAS (88F5182) */ +#define MV88F5182_DEV_ID 0x5182 +#define MV88F5182_REV_A2 2 +/* Orion-2 (88F5281) */ +#define MV88F5281_DEV_ID 0x5281 +#define MV88F5281_REV_D1 5 +#define MV88F5281_REV_D2 6 + +/******************************************************************************* + * Orion Registers Map + ******************************************************************************/ +#define ORION_DDR_REG_BASE (ORION_REGS_BASE | 0x00000) +#define ORION_DEV_BUS_REG_BASE (ORION_REGS_BASE | 0x10000) +#define ORION_BRIDGE_REG_BASE (ORION_REGS_BASE | 0x20000) +#define ORION_PCI_REG_BASE (ORION_REGS_BASE | 0x30000) +#define ORION_PCIE_REG_BASE (ORION_REGS_BASE | 0x40000) +#define ORION_USB0_REG_BASE (ORION_REGS_BASE | 0x50000) +#define ORION_ETH_REG_BASE (ORION_REGS_BASE | 0x70000) +#define ORION_SATA_REG_BASE (ORION_REGS_BASE | 0x80000) +#define ORION_USB1_REG_BASE (ORION_REGS_BASE | 0xa0000) + +#define ORION_DDR_REG(x) (ORION_DDR_REG_BASE | (x)) +#define ORION_DEV_BUS_REG(x) (ORION_DEV_BUS_REG_BASE | (x)) +#define ORION_BRIDGE_REG(x) (ORION_BRIDGE_REG_BASE | (x)) +#define ORION_PCI_REG(x) (ORION_PCI_REG_BASE | (x)) +#define ORION_PCIE_REG(x) (ORION_PCIE_REG_BASE | (x)) +#define ORION_USB0_REG(x) (ORION_USB0_REG_BASE | (x)) +#define ORION_USB1_REG(x) (ORION_USB1_REG_BASE | (x)) +#define ORION_ETH_REG(x) (ORION_ETH_REG_BASE | (x)) +#define ORION_SATA_REG(x) (ORION_SATA_REG_BASE | (x)) + +/******************************************************************************* + * Device Bus Registers + ******************************************************************************/ +#define MPP_0_7_CTRL ORION_DEV_BUS_REG(0x000) +#define MPP_8_15_CTRL ORION_DEV_BUS_REG(0x004) +#define MPP_16_19_CTRL ORION_DEV_BUS_REG(0x050) +#define MPP_DEV_CTRL ORION_DEV_BUS_REG(0x008) +#define MPP_RESET_SAMPLE ORION_DEV_BUS_REG(0x010) +#define GPIO_OUT ORION_DEV_BUS_REG(0x100) +#define GPIO_IO_CONF ORION_DEV_BUS_REG(0x104) +#define GPIO_BLINK_EN ORION_DEV_BUS_REG(0x108) +#define GPIO_IN_POL ORION_DEV_BUS_REG(0x10c) +#define GPIO_DATA_IN ORION_DEV_BUS_REG(0x110) +#define GPIO_EDGE_CAUSE ORION_DEV_BUS_REG(0x114) +#define GPIO_EDGE_MASK ORION_DEV_BUS_REG(0x118) +#define GPIO_LEVEL_MASK ORION_DEV_BUS_REG(0x11c) +#define DEV_BANK_0_PARAM ORION_DEV_BUS_REG(0x45c) +#define DEV_BANK_1_PARAM ORION_DEV_BUS_REG(0x460) +#define DEV_BANK_2_PARAM ORION_DEV_BUS_REG(0x464) +#define DEV_BANK_BOOT_PARAM ORION_DEV_BUS_REG(0x46c) +#define DEV_BUS_CTRL ORION_DEV_BUS_REG(0x4c0) +#define DEV_BUS_INT_CAUSE ORION_DEV_BUS_REG(0x4d0) +#define DEV_BUS_INT_MASK ORION_DEV_BUS_REG(0x4d4) +#define I2C_BASE ORION_DEV_BUS_REG(0x1000) +#define UART0_BASE ORION_DEV_BUS_REG(0x2000) +#define UART1_BASE ORION_DEV_BUS_REG(0x2100) +#define GPIO_MAX 32 + +/*************************************************************************** + * Orion CPU Bridge Registers + **************************************************************************/ +#define CPU_CONF ORION_BRIDGE_REG(0x100) +#define CPU_CTRL ORION_BRIDGE_REG(0x104) +#define CPU_RESET_MASK ORION_BRIDGE_REG(0x108) +#define CPU_SOFT_RESET ORION_BRIDGE_REG(0x10c) +#define POWER_MNG_CTRL_REG ORION_BRIDGE_REG(0x11C) +#define BRIDGE_CAUSE ORION_BRIDGE_REG(0x110) +#define BRIDGE_MASK ORION_BRIDGE_REG(0x114) +#define MAIN_IRQ_CAUSE ORION_BRIDGE_REG(0x200) +#define MAIN_IRQ_MASK ORION_BRIDGE_REG(0x204) +#define TIMER_CTRL ORION_BRIDGE_REG(0x300) +#define TIMER_VAL(x) ORION_BRIDGE_REG(0x314 + ((x) * 8)) +#define TIMER_VAL_RELOAD(x) ORION_BRIDGE_REG(0x310 + ((x) * 8)) + +#ifndef __ASSEMBLY__ + +/******************************************************************************* + * Helpers to access Orion registers + ******************************************************************************/ +#include <asm/types.h> +#include <asm/io.h> + +#define orion_read(r) __raw_readl(r) +#define orion_write(r, val) __raw_writel(val, r) + +/* + * These are not preempt safe. Locks, if needed, must be taken care by caller. + */ +#define orion_setbits(r, mask) orion_write((r), orion_read(r) | (mask)) +#define orion_clrbits(r, mask) orion_write((r), orion_read(r) & ~(mask)) + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARCH_ORION_H__ */ diff --git a/include/asm-arm/arch-orion/platform.h b/include/asm-arm/arch-orion/platform.h new file mode 100644 index 000000000000..143c38e2fa0b --- /dev/null +++ b/include/asm-arm/arch-orion/platform.h @@ -0,0 +1,25 @@ +/* + * asm-arm/arch-orion/platform.h + * + * Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_PLATFORM_H__ +#define __ASM_ARCH_PLATFORM_H__ + +/* + * Device bus NAND private data + */ +struct orion_nand_data { + struct mtd_partition *parts; + u32 nr_parts; + u8 ale; /* address line number connected to ALE */ + u8 cle; /* address line number connected to CLE */ + u8 width; /* buswidth */ +}; + +#endif diff --git a/include/asm-arm/arch-orion/system.h b/include/asm-arm/arch-orion/system.h new file mode 100644 index 000000000000..17704c68f90e --- /dev/null +++ b/include/asm-arm/arch-orion/system.h @@ -0,0 +1,31 @@ +/* + * include/asm-arm/arch-orion/system.h + * + * Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include <asm/arch/hardware.h> +#include <asm/arch/orion.h> + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + /* + * Enable and issue soft reset + */ + orion_setbits(CPU_RESET_MASK, (1 << 2)); + orion_setbits(CPU_SOFT_RESET, 1); +} + +#endif diff --git a/include/asm-arm/arch-orion/timex.h b/include/asm-arm/arch-orion/timex.h new file mode 100644 index 000000000000..26c2c91eecf0 --- /dev/null +++ b/include/asm-arm/arch-orion/timex.h @@ -0,0 +1,12 @@ +/* + * include/asm-arm/arch-orion/timex.h + * + * Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define ORION_TCLK 166666667 +#define CLOCK_TICK_RATE ORION_TCLK diff --git a/include/asm-arm/arch-orion/uncompress.h b/include/asm-arm/arch-orion/uncompress.h new file mode 100644 index 000000000000..a1a222fb438c --- /dev/null +++ b/include/asm-arm/arch-orion/uncompress.h @@ -0,0 +1,44 @@ +/* + * include/asm-arm/arch-orion/uncompress.h + * + * Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/arch/orion.h> + +#define MV_UART_LSR ((volatile unsigned char *)(UART0_BASE + 0x14)) +#define MV_UART_THR ((volatile unsigned char *)(UART0_BASE + 0x0)) + +#define LSR_THRE 0x20 + +static void putc(const char c) +{ + int j = 0x1000; + while (--j && !(*MV_UART_LSR & LSR_THRE)) + barrier(); + *MV_UART_THR = c; +} + +static void flush(void) +{ +} + +static void orion_early_putstr(const char *ptr) +{ + char c; + while ((c = *ptr++) != '\0') { + if (c == '\n') + putc('\r'); + putc(c); + } +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-orion/vmalloc.h b/include/asm-arm/arch-orion/vmalloc.h new file mode 100644 index 000000000000..23e2a102fe0c --- /dev/null +++ b/include/asm-arm/arch-orion/vmalloc.h @@ -0,0 +1,5 @@ +/* + * include/asm-arm/arch-orion/vmalloc.h + */ + +#define VMALLOC_END 0xf0000000 diff --git a/include/asm-arm/arch-pxa/colibri.h b/include/asm-arm/arch-pxa/colibri.h new file mode 100644 index 000000000000..2ae373fb5675 --- /dev/null +++ b/include/asm-arm/arch-pxa/colibri.h @@ -0,0 +1,19 @@ +#ifndef _COLIBRI_H_ +#define _COLIBRI_H_ + +/* physical memory regions */ +#define COLIBRI_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ +#define COLIBRI_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */ +#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ + +/* virtual memory regions */ +#define COLIBRI_DISK_VIRT 0xF0000000 /* Disk On Chip region */ + +/* size of flash */ +#define COLIBRI_FLASH_SIZE 0x02000000 /* Flash size 32 MB */ + +/* Ethernet Controller Davicom DM9000 */ +#define GPIO_DM9000 114 +#define COLIBRI_ETH_IRQ IRQ_GPIO(GPIO_DM9000) + +#endif /* _COLIBRI_H_ */ diff --git a/include/asm-arm/arch-pxa/corgi.h b/include/asm-arm/arch-pxa/corgi.h index e554caa0d18b..bf856503baf6 100644 --- a/include/asm-arm/arch-pxa/corgi.h +++ b/include/asm-arm/arch-pxa/corgi.h @@ -104,7 +104,6 @@ */ extern struct platform_device corgiscoop_device; extern struct platform_device corgissp_device; -extern struct platform_device corgifb_device; #endif /* __ASM_ARCH_CORGI_H */ diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index b76ee6d1f5b4..c562b972a4a6 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -180,7 +180,8 @@ #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) #elif defined(CONFIG_ARCH_LUBBOCK) || \ defined(CONFIG_MACH_LOGICPD_PXA270) || \ - defined(CONFIG_MACH_MAINSTONE) + defined(CONFIG_MACH_MAINSTONE) || \ + defined(CONFIG_MACH_PCM027) #define NR_IRQS (IRQ_BOARD_END) #else #define NR_IRQS (IRQ_BOARD_START) @@ -227,6 +228,13 @@ #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) +/* phyCORE-PXA270 (PCM027) Interrupts */ +#define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) +#define PCM027_BTDET_IRQ PCM027_IRQ(0) +#define PCM027_FF_RI_IRQ PCM027_IRQ(1) +#define PCM027_MMCDET_IRQ PCM027_IRQ(2) +#define PCM027_PM_5V_IRQ PCM027_IRQ(3) + /* ITE8152 irqs */ /* add IT8152 IRQs beyond BOARD_END */ #ifdef CONFIG_PCI_HOST_ITE8152 diff --git a/include/asm-arm/arch-pxa/littleton.h b/include/asm-arm/arch-pxa/littleton.h new file mode 100644 index 000000000000..79d209b826f4 --- /dev/null +++ b/include/asm-arm/arch-pxa/littleton.h @@ -0,0 +1,6 @@ +#ifndef __ASM_ARCH_ZYLONITE_H +#define __ASM_ARCH_ZYLONITE_H + +#define LITTLETON_ETH_PHYS 0x30000000 + +#endif /* __ASM_ARCH_ZYLONITE_H */ diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h new file mode 100644 index 000000000000..337f51f06b3a --- /dev/null +++ b/include/asm-arm/arch-pxa/magician.h @@ -0,0 +1,111 @@ +/* + * GPIO and IRQ definitions for HTC Magician PDA phones + * + * Copyright (c) 2007 Philipp Zabel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _MAGICIAN_H_ +#define _MAGICIAN_H_ + +#include <asm/arch/pxa-regs.h> + +/* + * PXA GPIOs + */ + +#define GPIO0_MAGICIAN_KEY_POWER 0 +#define GPIO9_MAGICIAN_UNKNOWN 9 +#define GPIO10_MAGICIAN_GSM_IRQ 10 +#define GPIO11_MAGICIAN_GSM_OUT1 11 +#define GPIO13_MAGICIAN_CPLD_IRQ 13 +#define GPIO18_MAGICIAN_UNKNOWN 18 +#define GPIO22_MAGICIAN_VIBRA_EN 22 +#define GPIO26_MAGICIAN_GSM_POWER 26 +#define GPIO27_MAGICIAN_USBC_PUEN 27 +#define GPIO30_MAGICIAN_nCHARGE_EN 30 +#define GPIO37_MAGICIAN_KEY_HANGUP 37 +#define GPIO38_MAGICIAN_KEY_CONTACTS 38 +#define GPIO40_MAGICIAN_GSM_OUT2 40 +#define GPIO48_MAGICIAN_UNKNOWN 48 +#define GPIO56_MAGICIAN_UNKNOWN 56 +#define GPIO57_MAGICIAN_CAM_RESET 57 +#define GPIO83_MAGICIAN_nIR_EN 83 +#define GPIO86_MAGICIAN_GSM_RESET 86 +#define GPIO87_MAGICIAN_GSM_SELECT 87 +#define GPIO90_MAGICIAN_KEY_CALENDAR 90 +#define GPIO91_MAGICIAN_KEY_CAMERA 91 +#define GPIO93_MAGICIAN_KEY_UP 93 +#define GPIO94_MAGICIAN_KEY_DOWN 94 +#define GPIO95_MAGICIAN_KEY_LEFT 95 +#define GPIO96_MAGICIAN_KEY_RIGHT 96 +#define GPIO97_MAGICIAN_KEY_ENTER 97 +#define GPIO98_MAGICIAN_KEY_RECORD 98 +#define GPIO99_MAGICIAN_HEADPHONE_IN 99 +#define GPIO100_MAGICIAN_KEY_VOL_UP 100 +#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101 +#define GPIO102_MAGICIAN_KEY_PHONE 102 +#define GPIO103_MAGICIAN_LED_KP 103 +#define GPIO104_MAGICIAN_LCD_POWER_1 104 +#define GPIO105_MAGICIAN_LCD_POWER_2 105 +#define GPIO106_MAGICIAN_LCD_POWER_3 106 +#define GPIO107_MAGICIAN_DS1WM_IRQ 107 +#define GPIO108_MAGICIAN_GSM_READY 108 +#define GPIO114_MAGICIAN_UNKNOWN 114 +#define GPIO115_MAGICIAN_nPEN_IRQ 115 +#define GPIO116_MAGICIAN_nCAM_EN 116 +#define GPIO119_MAGICIAN_UNKNOWN 119 +#define GPIO120_MAGICIAN_UNKNOWN 120 + +/* + * PXA GPIO alternate function mode & direction + */ + +#define GPIO0_MAGICIAN_KEY_POWER_MD (0 | GPIO_IN) +#define GPIO9_MAGICIAN_UNKNOWN_MD (9 | GPIO_IN) +#define GPIO10_MAGICIAN_GSM_IRQ_MD (10 | GPIO_IN) +#define GPIO11_MAGICIAN_GSM_OUT1_MD (11 | GPIO_OUT) +#define GPIO13_MAGICIAN_CPLD_IRQ_MD (13 | GPIO_IN) +#define GPIO18_MAGICIAN_UNKNOWN_MD (18 | GPIO_OUT) +#define GPIO22_MAGICIAN_VIBRA_EN_MD (22 | GPIO_OUT) +#define GPIO26_MAGICIAN_GSM_POWER_MD (26 | GPIO_OUT) +#define GPIO27_MAGICIAN_USBC_PUEN_MD (27 | GPIO_OUT) +#define GPIO30_MAGICIAN_nCHARGE_EN_MD (30 | GPIO_OUT) +#define GPIO37_MAGICIAN_KEY_HANGUP_MD (37 | GPIO_OUT) +#define GPIO38_MAGICIAN_KEY_CONTACTS_MD (38 | GPIO_OUT) +#define GPIO40_MAGICIAN_GSM_OUT2_MD (40 | GPIO_OUT) +#define GPIO48_MAGICIAN_UNKNOWN_MD (48 | GPIO_OUT) +#define GPIO56_MAGICIAN_UNKNOWN_MD (56 | GPIO_OUT) +#define GPIO57_MAGICIAN_CAM_RESET_MD (57 | GPIO_OUT) +#define GPIO83_MAGICIAN_nIR_EN_MD (83 | GPIO_OUT) +#define GPIO86_MAGICIAN_GSM_RESET_MD (86 | GPIO_OUT) +#define GPIO87_MAGICIAN_GSM_SELECT_MD (87 | GPIO_OUT) +#define GPIO90_MAGICIAN_KEY_CALENDAR_MD (90 | GPIO_OUT) +#define GPIO91_MAGICIAN_KEY_CAMERA_MD (91 | GPIO_OUT) +#define GPIO93_MAGICIAN_KEY_UP_MD (93 | GPIO_IN) +#define GPIO94_MAGICIAN_KEY_DOWN_MD (94 | GPIO_IN) +#define GPIO95_MAGICIAN_KEY_LEFT_MD (95 | GPIO_IN) +#define GPIO96_MAGICIAN_KEY_RIGHT_MD (96 | GPIO_IN) +#define GPIO97_MAGICIAN_KEY_ENTER_MD (97 | GPIO_IN) +#define GPIO98_MAGICIAN_KEY_RECORD_MD (98 | GPIO_IN) +#define GPIO99_MAGICIAN_HEADPHONE_IN_MD (99 | GPIO_IN) +#define GPIO100_MAGICIAN_KEY_VOL_UP_MD (100 | GPIO_IN) +#define GPIO101_MAGICIAN_KEY_VOL_DOWN_MD (101 | GPIO_IN) +#define GPIO102_MAGICIAN_KEY_PHONE_MD (102 | GPIO_IN) +#define GPIO103_MAGICIAN_LED_KP_MD (103 | GPIO_OUT) +#define GPIO104_MAGICIAN_LCD_POWER_1_MD (104 | GPIO_OUT) +#define GPIO105_MAGICIAN_LCD_POWER_2_MD (105 | GPIO_OUT) +#define GPIO106_MAGICIAN_LCD_POWER_3_MD (106 | GPIO_OUT) +#define GPIO107_MAGICIAN_DS1WM_IRQ_MD (107 | GPIO_IN) +#define GPIO108_MAGICIAN_GSM_READY_MD (108 | GPIO_IN) +#define GPIO114_MAGICIAN_UNKNOWN_MD (114 | GPIO_OUT) +#define GPIO115_MAGICIAN_nPEN_IRQ_MD (115 | GPIO_IN) +#define GPIO116_MAGICIAN_nCAM_EN_MD (116 | GPIO_OUT) +#define GPIO119_MAGICIAN_UNKNOWN_MD (119 | GPIO_OUT) +#define GPIO120_MAGICIAN_UNKNOWN_MD (120 | GPIO_OUT) + +#endif /* _MAGICIAN_H_ */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h index a20996649889..bb410313556f 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa300.h +++ b/include/asm-arm/arch-pxa/mfp-pxa300.h @@ -16,6 +16,7 @@ #define __ASM_ARCH_MFP_PXA300_H #include <asm/arch/mfp.h> +#include <asm/arch/mfp-pxa3xx.h> /* GPIO */ #define GPIO46_GPIO MFP_CFG(GPIO46, AF1) diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h index 52deedcaf3bd..576aa46d90fc 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa320.h +++ b/include/asm-arm/arch-pxa/mfp-pxa320.h @@ -16,6 +16,7 @@ #define __ASM_ARCH_MFP_PXA320_H #include <asm/arch/mfp.h> +#include <asm/arch/mfp-pxa3xx.h> /* GPIO */ #define GPIO46_GPIO MFP_CFG(GPIO46, AF0) diff --git a/include/asm-arm/arch-pxa/mfp-pxa3xx.h b/include/asm-arm/arch-pxa/mfp-pxa3xx.h new file mode 100644 index 000000000000..1f6b35c015d0 --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa3xx.h @@ -0,0 +1,252 @@ +#ifndef __ASM_ARCH_MFP_PXA3XX_H +#define __ASM_ARCH_MFP_PXA3XX_H + +#define MFPR_BASE (0x40e10000) +#define MFPR_SIZE (PAGE_SIZE) + +/* MFPR register bit definitions */ +#define MFPR_PULL_SEL (0x1 << 15) +#define MFPR_PULLUP_EN (0x1 << 14) +#define MFPR_PULLDOWN_EN (0x1 << 13) +#define MFPR_SLEEP_SEL (0x1 << 9) +#define MFPR_SLEEP_OE_N (0x1 << 7) +#define MFPR_EDGE_CLEAR (0x1 << 6) +#define MFPR_EDGE_FALL_EN (0x1 << 5) +#define MFPR_EDGE_RISE_EN (0x1 << 4) + +#define MFPR_SLEEP_DATA(x) ((x) << 8) +#define MFPR_DRIVE(x) (((x) & 0x7) << 10) +#define MFPR_AF_SEL(x) (((x) & 0x7) << 0) + +#define MFPR_EDGE_NONE (0) +#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN) +#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN) +#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL) + +/* + * Table that determines the low power modes outputs, with actual settings + * used in parentheses for don't-care values. Except for the float output, + * the configured driven and pulled levels match, so if there is a need for + * non-LPM pulled output, the same configuration could probably be used. + * + * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel + * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) + * + * Input 0 X(0) X(0) X(0) 0 + * Drive 0 0 0 0 X(1) 0 + * Drive 1 0 1 X(1) 0 0 + * Pull hi (1) 1 X(1) 1 0 0 + * Pull lo (0) 1 X(0) 0 1 0 + * Z (float) 1 X(0) 0 0 0 + */ +#define MFPR_LPM_INPUT (0) +#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN) +#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN) +#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N) +#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N) +#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N) +#define MFPR_LPM_MASK (0xe080) + +/* + * The pullup and pulldown state of the MFP pin at run mode is by default + * determined by the selected alternate function. In case that some buggy + * devices need to override this default behavior, the definitions below + * indicates the setting of corresponding MFPR bits + * + * Definition pull_sel pullup_en pulldown_en + * MFPR_PULL_NONE 0 0 0 + * MFPR_PULL_LOW 1 0 1 + * MFPR_PULL_HIGH 1 1 0 + * MFPR_PULL_BOTH 1 1 1 + */ +#define MFPR_PULL_NONE (0) +#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) +#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) +#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) + +/* PXA3xx common MFP configurations - processor specific ones defined + * in mfp-pxa300.h and mfp-pxa320.h + */ +#define GPIO0_GPIO MFP_CFG(GPIO0, AF0) +#define GPIO1_GPIO MFP_CFG(GPIO1, AF0) +#define GPIO2_GPIO MFP_CFG(GPIO2, AF0) +#define GPIO3_GPIO MFP_CFG(GPIO3, AF0) +#define GPIO4_GPIO MFP_CFG(GPIO4, AF0) +#define GPIO5_GPIO MFP_CFG(GPIO5, AF0) +#define GPIO6_GPIO MFP_CFG(GPIO6, AF0) +#define GPIO7_GPIO MFP_CFG(GPIO7, AF0) +#define GPIO8_GPIO MFP_CFG(GPIO8, AF0) +#define GPIO9_GPIO MFP_CFG(GPIO9, AF0) +#define GPIO10_GPIO MFP_CFG(GPIO10, AF0) +#define GPIO11_GPIO MFP_CFG(GPIO11, AF0) +#define GPIO12_GPIO MFP_CFG(GPIO12, AF0) +#define GPIO13_GPIO MFP_CFG(GPIO13, AF0) +#define GPIO14_GPIO MFP_CFG(GPIO14, AF0) +#define GPIO15_GPIO MFP_CFG(GPIO15, AF0) +#define GPIO16_GPIO MFP_CFG(GPIO16, AF0) +#define GPIO17_GPIO MFP_CFG(GPIO17, AF0) +#define GPIO18_GPIO MFP_CFG(GPIO18, AF0) +#define GPIO19_GPIO MFP_CFG(GPIO19, AF0) +#define GPIO20_GPIO MFP_CFG(GPIO20, AF0) +#define GPIO21_GPIO MFP_CFG(GPIO21, AF0) +#define GPIO22_GPIO MFP_CFG(GPIO22, AF0) +#define GPIO23_GPIO MFP_CFG(GPIO23, AF0) +#define GPIO24_GPIO MFP_CFG(GPIO24, AF0) +#define GPIO25_GPIO MFP_CFG(GPIO25, AF0) +#define GPIO26_GPIO MFP_CFG(GPIO26, AF0) +#define GPIO27_GPIO MFP_CFG(GPIO27, AF0) +#define GPIO28_GPIO MFP_CFG(GPIO28, AF0) +#define GPIO29_GPIO MFP_CFG(GPIO29, AF0) +#define GPIO30_GPIO MFP_CFG(GPIO30, AF0) +#define GPIO31_GPIO MFP_CFG(GPIO31, AF0) +#define GPIO32_GPIO MFP_CFG(GPIO32, AF0) +#define GPIO33_GPIO MFP_CFG(GPIO33, AF0) +#define GPIO34_GPIO MFP_CFG(GPIO34, AF0) +#define GPIO35_GPIO MFP_CFG(GPIO35, AF0) +#define GPIO36_GPIO MFP_CFG(GPIO36, AF0) +#define GPIO37_GPIO MFP_CFG(GPIO37, AF0) +#define GPIO38_GPIO MFP_CFG(GPIO38, AF0) +#define GPIO39_GPIO MFP_CFG(GPIO39, AF0) +#define GPIO40_GPIO MFP_CFG(GPIO40, AF0) +#define GPIO41_GPIO MFP_CFG(GPIO41, AF0) +#define GPIO42_GPIO MFP_CFG(GPIO42, AF0) +#define GPIO43_GPIO MFP_CFG(GPIO43, AF0) +#define GPIO44_GPIO MFP_CFG(GPIO44, AF0) +#define GPIO45_GPIO MFP_CFG(GPIO45, AF0) + +#define GPIO47_GPIO MFP_CFG(GPIO47, AF0) +#define GPIO48_GPIO MFP_CFG(GPIO48, AF0) + +#define GPIO53_GPIO MFP_CFG(GPIO53, AF0) +#define GPIO54_GPIO MFP_CFG(GPIO54, AF0) +#define GPIO55_GPIO MFP_CFG(GPIO55, AF0) + +#define GPIO57_GPIO MFP_CFG(GPIO57, AF0) + +#define GPIO63_GPIO MFP_CFG(GPIO63, AF0) +#define GPIO64_GPIO MFP_CFG(GPIO64, AF0) +#define GPIO65_GPIO MFP_CFG(GPIO65, AF0) +#define GPIO66_GPIO MFP_CFG(GPIO66, AF0) +#define GPIO67_GPIO MFP_CFG(GPIO67, AF0) +#define GPIO68_GPIO MFP_CFG(GPIO68, AF0) +#define GPIO69_GPIO MFP_CFG(GPIO69, AF0) +#define GPIO70_GPIO MFP_CFG(GPIO70, AF0) +#define GPIO71_GPIO MFP_CFG(GPIO71, AF0) +#define GPIO72_GPIO MFP_CFG(GPIO72, AF0) +#define GPIO73_GPIO MFP_CFG(GPIO73, AF0) +#define GPIO74_GPIO MFP_CFG(GPIO74, AF0) +#define GPIO75_GPIO MFP_CFG(GPIO75, AF0) +#define GPIO76_GPIO MFP_CFG(GPIO76, AF0) +#define GPIO77_GPIO MFP_CFG(GPIO77, AF0) +#define GPIO78_GPIO MFP_CFG(GPIO78, AF0) +#define GPIO79_GPIO MFP_CFG(GPIO79, AF0) +#define GPIO80_GPIO MFP_CFG(GPIO80, AF0) +#define GPIO81_GPIO MFP_CFG(GPIO81, AF0) +#define GPIO82_GPIO MFP_CFG(GPIO82, AF0) +#define GPIO83_GPIO MFP_CFG(GPIO83, AF0) +#define GPIO84_GPIO MFP_CFG(GPIO84, AF0) +#define GPIO85_GPIO MFP_CFG(GPIO85, AF0) +#define GPIO86_GPIO MFP_CFG(GPIO86, AF0) +#define GPIO87_GPIO MFP_CFG(GPIO87, AF0) +#define GPIO88_GPIO MFP_CFG(GPIO88, AF0) +#define GPIO89_GPIO MFP_CFG(GPIO89, AF0) +#define GPIO90_GPIO MFP_CFG(GPIO90, AF0) +#define GPIO91_GPIO MFP_CFG(GPIO91, AF0) +#define GPIO92_GPIO MFP_CFG(GPIO92, AF0) +#define GPIO93_GPIO MFP_CFG(GPIO93, AF0) +#define GPIO94_GPIO MFP_CFG(GPIO94, AF0) +#define GPIO95_GPIO MFP_CFG(GPIO95, AF0) +#define GPIO96_GPIO MFP_CFG(GPIO96, AF0) +#define GPIO97_GPIO MFP_CFG(GPIO97, AF0) +#define GPIO98_GPIO MFP_CFG(GPIO98, AF0) +#define GPIO99_GPIO MFP_CFG(GPIO99, AF0) +#define GPIO100_GPIO MFP_CFG(GPIO100, AF0) +#define GPIO101_GPIO MFP_CFG(GPIO101, AF0) +#define GPIO102_GPIO MFP_CFG(GPIO102, AF0) +#define GPIO103_GPIO MFP_CFG(GPIO103, AF0) +#define GPIO104_GPIO MFP_CFG(GPIO104, AF0) +#define GPIO105_GPIO MFP_CFG(GPIO105, AF0) +#define GPIO106_GPIO MFP_CFG(GPIO106, AF0) +#define GPIO107_GPIO MFP_CFG(GPIO107, AF0) +#define GPIO108_GPIO MFP_CFG(GPIO108, AF0) +#define GPIO109_GPIO MFP_CFG(GPIO109, AF0) +#define GPIO110_GPIO MFP_CFG(GPIO110, AF0) +#define GPIO111_GPIO MFP_CFG(GPIO111, AF0) +#define GPIO112_GPIO MFP_CFG(GPIO112, AF0) +#define GPIO113_GPIO MFP_CFG(GPIO113, AF0) +#define GPIO114_GPIO MFP_CFG(GPIO114, AF0) +#define GPIO115_GPIO MFP_CFG(GPIO115, AF0) +#define GPIO116_GPIO MFP_CFG(GPIO116, AF0) +#define GPIO117_GPIO MFP_CFG(GPIO117, AF0) +#define GPIO118_GPIO MFP_CFG(GPIO118, AF0) +#define GPIO119_GPIO MFP_CFG(GPIO119, AF0) +#define GPIO120_GPIO MFP_CFG(GPIO120, AF0) +#define GPIO121_GPIO MFP_CFG(GPIO121, AF0) +#define GPIO122_GPIO MFP_CFG(GPIO122, AF0) +#define GPIO123_GPIO MFP_CFG(GPIO123, AF0) +#define GPIO124_GPIO MFP_CFG(GPIO124, AF0) +#define GPIO125_GPIO MFP_CFG(GPIO125, AF0) +#define GPIO126_GPIO MFP_CFG(GPIO126, AF0) +#define GPIO127_GPIO MFP_CFG(GPIO127, AF0) + +#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0) +#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0) +#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0) +#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0) +#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0) +#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) +#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) + +/* + * each MFP pin will have a MFPR register, since the offset of the + * register varies between processors, the processor specific code + * should initialize the pin offsets by pxa3xx_mfp_init_addr() + * + * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" + * structure, which represents a range of MFP pins from "start" to + * "end", with the offset begining at "offset", to define a single + * pin, let "end" = -1 + * + * use + * + * MFP_ADDR_X() to define a range of pins + * MFP_ADDR() to define a single pin + * MFP_ADDR_END to signal the end of pin offset definitions + */ +struct pxa3xx_mfp_addr_map { + unsigned int start; + unsigned int end; + unsigned long offset; +}; + +#define MFP_ADDR_X(start, end, offset) \ + { MFP_PIN_##start, MFP_PIN_##end, offset } + +#define MFP_ADDR(pin, offset) \ + { MFP_PIN_##pin, -1, offset } + +#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } + +/* + * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access + * to the MFPR register + */ +unsigned long pxa3xx_mfp_read(int mfp); +void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); + +/* + * pxa3xx_mfp_config - configure the MFPR registers + * + * used by board specific initialization code + */ +void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num); + +/* + * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin + * index and MFPR register offset + * + * used by processor specific code + */ +void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); +void __init pxa3xx_init_mfp(void); +#endif /* __ASM_ARCH_MFP_PXA3XX_H */ diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h index 03c508d94f0e..02f6157396d3 100644 --- a/include/asm-arm/arch-pxa/mfp.h +++ b/include/asm-arm/arch-pxa/mfp.h @@ -16,9 +16,6 @@ #ifndef __ASM_ARCH_MFP_H #define __ASM_ARCH_MFP_H -#define MFPR_BASE (0x40e10000) -#define MFPR_SIZE (PAGE_SIZE) - #define mfp_to_gpio(m) ((m) % 128) /* list of all the configurable MFP pins */ @@ -217,114 +214,21 @@ enum { }; /* - * Table that determines the low power modes outputs, with actual settings - * used in parentheses for don't-care values. Except for the float output, - * the configured driven and pulled levels match, so if there is a need for - * non-LPM pulled output, the same configuration could probably be used. - * - * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel - * (bit 7) (bit 8) (bit 14d) (bit 13d) - * - * Drive 0 0 0 0 X (1) 0 - * Drive 1 0 1 X (1) 0 0 - * Pull hi (1) 1 X(1) 1 0 0 - * Pull lo (0) 1 X(0) 0 1 0 - * Z (float) 1 X(0) 0 0 0 - */ -#define MFP_LPM_DRIVE_LOW 0x8 -#define MFP_LPM_DRIVE_HIGH 0x6 -#define MFP_LPM_PULL_HIGH 0x7 -#define MFP_LPM_PULL_LOW 0x9 -#define MFP_LPM_FLOAT 0x1 -#define MFP_LPM_PULL_NEITHER 0x0 - -/* - * The pullup and pulldown state of the MFP pin is by default determined by - * selected alternate function. In case some buggy devices need to override - * this default behavior, pxa3xx_mfp_set_pull() can be invoked with one of - * the following definition as the parameter. - * - * Definition pull_sel pullup_en pulldown_en - * MFP_PULL_HIGH 1 1 0 - * MFP_PULL_LOW 1 0 1 - * MFP_PULL_BOTH 1 1 1 - * MFP_PULL_NONE 1 0 0 - * MFP_PULL_DEFAULT 0 X X - * - * NOTE: pxa3xx_mfp_set_pull() will modify the PULLUP_EN and PULLDOWN_EN - * bits, which will cause potential conflicts with the low power mode - * setting, device drivers should take care of this - */ -#define MFP_PULL_BOTH (0x7u) -#define MFP_PULL_HIGH (0x6u) -#define MFP_PULL_LOW (0x5u) -#define MFP_PULL_NONE (0x4u) -#define MFP_PULL_DEFAULT (0x0u) - -#define MFP_AF0 (0) -#define MFP_AF1 (1) -#define MFP_AF2 (2) -#define MFP_AF3 (3) -#define MFP_AF4 (4) -#define MFP_AF5 (5) -#define MFP_AF6 (6) -#define MFP_AF7 (7) - -#define MFP_DS01X (0) -#define MFP_DS02X (1) -#define MFP_DS03X (2) -#define MFP_DS04X (3) -#define MFP_DS06X (4) -#define MFP_DS08X (5) -#define MFP_DS10X (6) -#define MFP_DS12X (7) - -#define MFP_EDGE_BOTH 0x3 -#define MFP_EDGE_RISE 0x2 -#define MFP_EDGE_FALL 0x1 -#define MFP_EDGE_NONE 0x0 - -#define MFPR_AF_MASK 0x0007 -#define MFPR_DRV_MASK 0x1c00 -#define MFPR_RDH_MASK 0x0200 -#define MFPR_LPM_MASK 0xe180 -#define MFPR_PULL_MASK 0xe000 -#define MFPR_EDGE_MASK 0x0070 - -#define MFPR_ALT_OFFSET 0 -#define MFPR_ERE_OFFSET 4 -#define MFPR_EFE_OFFSET 5 -#define MFPR_EC_OFFSET 6 -#define MFPR_SON_OFFSET 7 -#define MFPR_SD_OFFSET 8 -#define MFPR_SS_OFFSET 9 -#define MFPR_DRV_OFFSET 10 -#define MFPR_PD_OFFSET 13 -#define MFPR_PU_OFFSET 14 -#define MFPR_PS_OFFSET 15 - -#define MFPR(af, drv, rdh, lpm, edge) \ - (((af) & 0x7) | (((drv) & 0x7) << 10) |\ - (((rdh) & 0x1) << 9) |\ - (((lpm) & 0x3) << 7) |\ - (((lpm) & 0x4) << 12)|\ - (((lpm) & 0x8) << 10)|\ - ((!(edge)) << 6) |\ - (((edge) & 0x1) << 5) |\ - (((edge) & 0x2) << 3)) - -/* * a possible MFP configuration is represented by a 32-bit integer - * bit 0..15 - MFPR value (16-bit) - * bit 16..31 - mfp pin index (used to obtain the MFPR offset) + * + * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) + * bit 10..12 - Alternate Function Selection + * bit 13..15 - Drive Strength + * bit 16..18 - Low Power Mode State + * bit 19..20 - Low Power Mode Edge Detection + * bit 21..22 - Run Mode Pull State * * to facilitate the definition, the following macros are provided * - * MFPR_DEFAULT - default MFPR value, with + * MFP_CFG_DEFAULT - default MFP configuration value, with * alternate function = 0, - * drive strength = fast 1mA (MFP_DS01X) + * drive strength = fast 3mA (MFP_DS03X) * low power mode = default - * release dalay hold = false (RDH bit) * edge detection = none * * MFP_CFG - default MFPR value with alternate function @@ -334,251 +238,74 @@ enum { * low power mode * MFP_CFG_X - default MFPR value with alternate function, * pin drive strength and low power mode - * - * use - * - * MFP_CFG_PIN - to get the MFP pin index - * MFP_CFG_VAL - to get the corresponding MFPR value */ -typedef uint32_t mfp_cfg_t; - -#define MFP_CFG_PIN(mfp_cfg) (((mfp_cfg) >> 16) & 0xffff) -#define MFP_CFG_VAL(mfp_cfg) ((mfp_cfg) & 0xffff) - -/* - * MFP register defaults to - * drive strength fast 3mA (010'b) - * edge detection logic disabled - * alternate function 0 - */ -#define MFPR_DEFAULT (0x0840) +typedef unsigned long mfp_cfg_t; + +#define MFP_PIN(x) ((x) & 0x3ff) + +#define MFP_AF0 (0x0 << 10) +#define MFP_AF1 (0x1 << 10) +#define MFP_AF2 (0x2 << 10) +#define MFP_AF3 (0x3 << 10) +#define MFP_AF4 (0x4 << 10) +#define MFP_AF5 (0x5 << 10) +#define MFP_AF6 (0x6 << 10) +#define MFP_AF7 (0x7 << 10) +#define MFP_AF_MASK (0x7 << 10) +#define MFP_AF(x) (((x) >> 10) & 0x7) + +#define MFP_DS01X (0x0 << 13) +#define MFP_DS02X (0x1 << 13) +#define MFP_DS03X (0x2 << 13) +#define MFP_DS04X (0x3 << 13) +#define MFP_DS06X (0x4 << 13) +#define MFP_DS08X (0x5 << 13) +#define MFP_DS10X (0x6 << 13) +#define MFP_DS13X (0x7 << 13) +#define MFP_DS_MASK (0x7 << 13) +#define MFP_DS(x) (((x) >> 13) & 0x7) + +#define MFP_LPM_INPUT (0x0 << 16) +#define MFP_LPM_DRIVE_LOW (0x1 << 16) +#define MFP_LPM_DRIVE_HIGH (0x2 << 16) +#define MFP_LPM_PULL_LOW (0x3 << 16) +#define MFP_LPM_PULL_HIGH (0x4 << 16) +#define MFP_LPM_FLOAT (0x5 << 16) +#define MFP_LPM_STATE_MASK (0x7 << 16) +#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) + +#define MFP_LPM_EDGE_NONE (0x0 << 19) +#define MFP_LPM_EDGE_RISE (0x1 << 19) +#define MFP_LPM_EDGE_FALL (0x2 << 19) +#define MFP_LPM_EDGE_BOTH (0x3 << 19) +#define MFP_LPM_EDGE_MASK (0x3 << 19) +#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) + +#define MFP_PULL_NONE (0x0 << 21) +#define MFP_PULL_LOW (0x1 << 21) +#define MFP_PULL_HIGH (0x2 << 21) +#define MFP_PULL_BOTH (0x3 << 21) +#define MFP_PULL_MASK (0x3 << 21) +#define MFP_PULL(x) (((x) >> 21) & 0x3) + +#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\ + MFP_LPM_EDGE_NONE | MFP_PULL_NONE) #define MFP_CFG(pin, af) \ - ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af)) + ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) #define MFP_CFG_DRV(pin, af, drv) \ - ((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_DRV_MASK) |\ - ((MFP_##drv) << 10) | (MFP_##af)) + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) #define MFP_CFG_LPM(pin, af, lpm) \ - ((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_LPM_MASK) |\ - (((MFP_LPM_##lpm) & 0x3) << 7) |\ - (((MFP_LPM_##lpm) & 0x4) << 12) |\ - (((MFP_LPM_##lpm) & 0x8) << 10) |\ - (MFP_##af)) + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) #define MFP_CFG_X(pin, af, drv, lpm) \ - ((MFP_PIN_##pin << 16) |\ - (MFPR_DEFAULT & ~(MFPR_DRV_MASK | MFPR_LPM_MASK)) |\ - ((MFP_##drv) << 10) | (MFP_##af) |\ - (((MFP_LPM_##lpm) & 0x3) << 7) |\ - (((MFP_LPM_##lpm) & 0x4) << 12) |\ - (((MFP_LPM_##lpm) & 0x8) << 10)) - -/* common MFP configurations - processor specific ones defined - * in mfp-pxa3xx.h - */ -#define GPIO0_GPIO MFP_CFG(GPIO0, AF0) -#define GPIO1_GPIO MFP_CFG(GPIO1, AF0) -#define GPIO2_GPIO MFP_CFG(GPIO2, AF0) -#define GPIO3_GPIO MFP_CFG(GPIO3, AF0) -#define GPIO4_GPIO MFP_CFG(GPIO4, AF0) -#define GPIO5_GPIO MFP_CFG(GPIO5, AF0) -#define GPIO6_GPIO MFP_CFG(GPIO6, AF0) -#define GPIO7_GPIO MFP_CFG(GPIO7, AF0) -#define GPIO8_GPIO MFP_CFG(GPIO8, AF0) -#define GPIO9_GPIO MFP_CFG(GPIO9, AF0) -#define GPIO10_GPIO MFP_CFG(GPIO10, AF0) -#define GPIO11_GPIO MFP_CFG(GPIO11, AF0) -#define GPIO12_GPIO MFP_CFG(GPIO12, AF0) -#define GPIO13_GPIO MFP_CFG(GPIO13, AF0) -#define GPIO14_GPIO MFP_CFG(GPIO14, AF0) -#define GPIO15_GPIO MFP_CFG(GPIO15, AF0) -#define GPIO16_GPIO MFP_CFG(GPIO16, AF0) -#define GPIO17_GPIO MFP_CFG(GPIO17, AF0) -#define GPIO18_GPIO MFP_CFG(GPIO18, AF0) -#define GPIO19_GPIO MFP_CFG(GPIO19, AF0) -#define GPIO20_GPIO MFP_CFG(GPIO20, AF0) -#define GPIO21_GPIO MFP_CFG(GPIO21, AF0) -#define GPIO22_GPIO MFP_CFG(GPIO22, AF0) -#define GPIO23_GPIO MFP_CFG(GPIO23, AF0) -#define GPIO24_GPIO MFP_CFG(GPIO24, AF0) -#define GPIO25_GPIO MFP_CFG(GPIO25, AF0) -#define GPIO26_GPIO MFP_CFG(GPIO26, AF0) -#define GPIO27_GPIO MFP_CFG(GPIO27, AF0) -#define GPIO28_GPIO MFP_CFG(GPIO28, AF0) -#define GPIO29_GPIO MFP_CFG(GPIO29, AF0) -#define GPIO30_GPIO MFP_CFG(GPIO30, AF0) -#define GPIO31_GPIO MFP_CFG(GPIO31, AF0) -#define GPIO32_GPIO MFP_CFG(GPIO32, AF0) -#define GPIO33_GPIO MFP_CFG(GPIO33, AF0) -#define GPIO34_GPIO MFP_CFG(GPIO34, AF0) -#define GPIO35_GPIO MFP_CFG(GPIO35, AF0) -#define GPIO36_GPIO MFP_CFG(GPIO36, AF0) -#define GPIO37_GPIO MFP_CFG(GPIO37, AF0) -#define GPIO38_GPIO MFP_CFG(GPIO38, AF0) -#define GPIO39_GPIO MFP_CFG(GPIO39, AF0) -#define GPIO40_GPIO MFP_CFG(GPIO40, AF0) -#define GPIO41_GPIO MFP_CFG(GPIO41, AF0) -#define GPIO42_GPIO MFP_CFG(GPIO42, AF0) -#define GPIO43_GPIO MFP_CFG(GPIO43, AF0) -#define GPIO44_GPIO MFP_CFG(GPIO44, AF0) -#define GPIO45_GPIO MFP_CFG(GPIO45, AF0) - -#define GPIO47_GPIO MFP_CFG(GPIO47, AF0) -#define GPIO48_GPIO MFP_CFG(GPIO48, AF0) - -#define GPIO53_GPIO MFP_CFG(GPIO53, AF0) -#define GPIO54_GPIO MFP_CFG(GPIO54, AF0) -#define GPIO55_GPIO MFP_CFG(GPIO55, AF0) - -#define GPIO57_GPIO MFP_CFG(GPIO57, AF0) - -#define GPIO63_GPIO MFP_CFG(GPIO63, AF0) -#define GPIO64_GPIO MFP_CFG(GPIO64, AF0) -#define GPIO65_GPIO MFP_CFG(GPIO65, AF0) -#define GPIO66_GPIO MFP_CFG(GPIO66, AF0) -#define GPIO67_GPIO MFP_CFG(GPIO67, AF0) -#define GPIO68_GPIO MFP_CFG(GPIO68, AF0) -#define GPIO69_GPIO MFP_CFG(GPIO69, AF0) -#define GPIO70_GPIO MFP_CFG(GPIO70, AF0) -#define GPIO71_GPIO MFP_CFG(GPIO71, AF0) -#define GPIO72_GPIO MFP_CFG(GPIO72, AF0) -#define GPIO73_GPIO MFP_CFG(GPIO73, AF0) -#define GPIO74_GPIO MFP_CFG(GPIO74, AF0) -#define GPIO75_GPIO MFP_CFG(GPIO75, AF0) -#define GPIO76_GPIO MFP_CFG(GPIO76, AF0) -#define GPIO77_GPIO MFP_CFG(GPIO77, AF0) -#define GPIO78_GPIO MFP_CFG(GPIO78, AF0) -#define GPIO79_GPIO MFP_CFG(GPIO79, AF0) -#define GPIO80_GPIO MFP_CFG(GPIO80, AF0) -#define GPIO81_GPIO MFP_CFG(GPIO81, AF0) -#define GPIO82_GPIO MFP_CFG(GPIO82, AF0) -#define GPIO83_GPIO MFP_CFG(GPIO83, AF0) -#define GPIO84_GPIO MFP_CFG(GPIO84, AF0) -#define GPIO85_GPIO MFP_CFG(GPIO85, AF0) -#define GPIO86_GPIO MFP_CFG(GPIO86, AF0) -#define GPIO87_GPIO MFP_CFG(GPIO87, AF0) -#define GPIO88_GPIO MFP_CFG(GPIO88, AF0) -#define GPIO89_GPIO MFP_CFG(GPIO89, AF0) -#define GPIO90_GPIO MFP_CFG(GPIO90, AF0) -#define GPIO91_GPIO MFP_CFG(GPIO91, AF0) -#define GPIO92_GPIO MFP_CFG(GPIO92, AF0) -#define GPIO93_GPIO MFP_CFG(GPIO93, AF0) -#define GPIO94_GPIO MFP_CFG(GPIO94, AF0) -#define GPIO95_GPIO MFP_CFG(GPIO95, AF0) -#define GPIO96_GPIO MFP_CFG(GPIO96, AF0) -#define GPIO97_GPIO MFP_CFG(GPIO97, AF0) -#define GPIO98_GPIO MFP_CFG(GPIO98, AF0) -#define GPIO99_GPIO MFP_CFG(GPIO99, AF0) -#define GPIO100_GPIO MFP_CFG(GPIO100, AF0) -#define GPIO101_GPIO MFP_CFG(GPIO101, AF0) -#define GPIO102_GPIO MFP_CFG(GPIO102, AF0) -#define GPIO103_GPIO MFP_CFG(GPIO103, AF0) -#define GPIO104_GPIO MFP_CFG(GPIO104, AF0) -#define GPIO105_GPIO MFP_CFG(GPIO105, AF0) -#define GPIO106_GPIO MFP_CFG(GPIO106, AF0) -#define GPIO107_GPIO MFP_CFG(GPIO107, AF0) -#define GPIO108_GPIO MFP_CFG(GPIO108, AF0) -#define GPIO109_GPIO MFP_CFG(GPIO109, AF0) -#define GPIO110_GPIO MFP_CFG(GPIO110, AF0) -#define GPIO111_GPIO MFP_CFG(GPIO111, AF0) -#define GPIO112_GPIO MFP_CFG(GPIO112, AF0) -#define GPIO113_GPIO MFP_CFG(GPIO113, AF0) -#define GPIO114_GPIO MFP_CFG(GPIO114, AF0) -#define GPIO115_GPIO MFP_CFG(GPIO115, AF0) -#define GPIO116_GPIO MFP_CFG(GPIO116, AF0) -#define GPIO117_GPIO MFP_CFG(GPIO117, AF0) -#define GPIO118_GPIO MFP_CFG(GPIO118, AF0) -#define GPIO119_GPIO MFP_CFG(GPIO119, AF0) -#define GPIO120_GPIO MFP_CFG(GPIO120, AF0) -#define GPIO121_GPIO MFP_CFG(GPIO121, AF0) -#define GPIO122_GPIO MFP_CFG(GPIO122, AF0) -#define GPIO123_GPIO MFP_CFG(GPIO123, AF0) -#define GPIO124_GPIO MFP_CFG(GPIO124, AF0) -#define GPIO125_GPIO MFP_CFG(GPIO125, AF0) -#define GPIO126_GPIO MFP_CFG(GPIO126, AF0) -#define GPIO127_GPIO MFP_CFG(GPIO127, AF0) - -#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0) -#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0) -#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0) -#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0) -#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0) -#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) -#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) - -/* - * each MFP pin will have a MFPR register, since the offset of the - * register varies between processors, the processor specific code - * should initialize the pin offsets by pxa3xx_mfp_init_addr() - * - * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" - * structure, which represents a range of MFP pins from "start" to - * "end", with the offset begining at "offset", to define a single - * pin, let "end" = -1 - * - * use - * - * MFP_ADDR_X() to define a range of pins - * MFP_ADDR() to define a single pin - * MFP_ADDR_END to signal the end of pin offset definitions - */ -struct pxa3xx_mfp_addr_map { - unsigned int start; - unsigned int end; - unsigned long offset; -}; - -#define MFP_ADDR_X(start, end, offset) \ - { MFP_PIN_##start, MFP_PIN_##end, offset } - -#define MFP_ADDR(pin, offset) \ - { MFP_PIN_##pin, -1, offset } - -#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } - -struct pxa3xx_mfp_pin { - unsigned long mfpr_off; /* MFPRxx register offset */ - unsigned long mfpr_val; /* MFPRxx register value */ -}; - -/* - * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access - * to the MFPR register - */ -unsigned long pxa3xx_mfp_read(int mfp); -void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); - -/* - * pxa3xx_mfp_set_afds - set MFP alternate function and drive strength - * pxa3xx_mfp_set_rdh - set MFP release delay hold on/off - * pxa3xx_mfp_set_lpm - set MFP low power mode state - * pxa3xx_mfp_set_edge - set MFP edge detection in low power mode - * - * use these functions to override/change the default configuration - * done by pxa3xx_mfp_set_config(s) - */ -void pxa3xx_mfp_set_afds(int mfp, int af, int ds); -void pxa3xx_mfp_set_rdh(int mfp, int rdh); -void pxa3xx_mfp_set_lpm(int mfp, int lpm); -void pxa3xx_mfp_set_edge(int mfp, int edge); - -/* - * pxa3xx_mfp_config - configure the MFPR registers - * - * used by board specific initialization code - */ -void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num); - -/* - * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin - * index and MFPR register offset - * - * used by processor specific code - */ -void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); -void __init pxa3xx_init_mfp(void); + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) #endif /* __ASM_ARCH_MFP_H */ diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h index ef4f570381d1..6d1304c9270f 100644 --- a/include/asm-arm/arch-pxa/mmc.h +++ b/include/asm-arm/arch-pxa/mmc.h @@ -17,5 +17,7 @@ struct pxamci_platform_data { }; extern void pxa_set_mci_info(struct pxamci_platform_data *info); +extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info); +extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info); #endif diff --git a/include/asm-arm/arch-pxa/pcm027.h b/include/asm-arm/arch-pxa/pcm027.h new file mode 100644 index 000000000000..7beae1472c3e --- /dev/null +++ b/include/asm-arm/arch-pxa/pcm027.h @@ -0,0 +1,75 @@ +/* + * linux/include/asm-arm/arch-pxa/pcm027.h + * + * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de> + * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * Definitions of CPU card resources only + */ + +/* I2C RTC */ +#define PCM027_RTC_IRQ_GPIO 0 +#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO) +#define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING +#define ADR_PCM027_RTC 0x51 /* I2C address */ + +/* I2C EEPROM */ +#define ADR_PCM027_EEPROM 0x54 /* I2C address */ + +/* Ethernet chip (SMSC91C111) */ +#define PCM027_ETH_IRQ_GPIO 52 +#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO) +#define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING +#define PCM027_ETH_PHYS PXA_CS5_PHYS +#define PCM027_ETH_SIZE (1*1024*1024) + +/* CAN controller SJA1000 (unsupported yet) */ +#define PCM027_CAN_IRQ_GPIO 114 +#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO) +#define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING +#define PCM027_CAN_PHYS 0x22000000 +#define PCM027_CAN_SIZE 0x100 + +/* SPI GPIO expander (unsupported yet) */ +#define PCM027_EGPIO_IRQ_GPIO 27 +#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO) +#define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING +#define PCM027_EGPIO_CS 24 +/* + * TODO: Switch this pin from dedicated usage to GPIO if + * more than the MAX7301 device is connected to this SPI bus + */ +#define PCM027_EGPIO_CS_MODE GPIO24_SFRM_MD + +/* Flash memory */ +#define PCM027_FLASH_PHYS 0x00000000 +#define PCM027_FLASH_SIZE 0x02000000 + +/* onboard LEDs connected to GPIO */ +#define PCM027_LED_CPU 90 +#define PCM027_LED_HEARD_BEAT 91 + +/* + * This CPU module needs a baseboard to work. After basic initializing + * its own devices, it calls baseboard's init function. + * TODO: Add your own basebaord init function and call it from + * inside pcm027_init(). This example here is for the developmen board. + * Refer pcm990-baseboard.c + */ +extern void pcm990_baseboard_init(void); diff --git a/include/asm-arm/arch-pxa/pcm990_baseboard.h b/include/asm-arm/arch-pxa/pcm990_baseboard.h new file mode 100644 index 000000000000..b699d0d7bdb2 --- /dev/null +++ b/include/asm-arm/arch-pxa/pcm990_baseboard.h @@ -0,0 +1,275 @@ +/* + * include/asm-arm/arch-pxa/pcm990_baseboard.h + * + * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de> + * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <asm/arch/pcm027.h> + +/* + * definitions relevant only when the PCM-990 + * development base board is in use + */ + +/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */ +#define PCM990_CTRL_INT_IRQ_GPIO 9 +#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO) +#define PCM990_CTRL_INT_IRQ_EDGE IRQT_RISING +#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */ +#define PCM990_CTRL_BASE 0xea000000 +#define PCM990_CTRL_SIZE (1*1024*1024) + +#define PCM990_CTRL_PWR_IRQ_GPIO 14 +#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO) +#define PCM990_CTRL_PWR_IRQ_EDGE IRQT_RISING + +/* visible CPLD (U7) registers */ +#define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */ +#define PCM990_CTRL_SYSRES 0x0001 /* System RESET REGISTER */ +#define PCM990_CTRL_RESOUT 0x0002 /* RESETOUT Enable REGISTER */ +#define PCM990_CTRL_RESGPIO 0x0004 /* RESETGPIO Enable REGISTER */ + +#define PCM990_CTRL_REG1 0x0002 /* Power REGISTER */ +#define PCM990_CTRL_5VOFF 0x0001 /* Disable 5V Regulators */ +#define PCM990_CTRL_CANPWR 0x0004 /* Enable CANPWR ADUM */ +#define PCM990_CTRL_PM_5V 0x0008 /* Read 5V OK */ + +#define PCM990_CTRL_REG2 0x0004 /* LED REGISTER */ +#define PCM990_CTRL_LEDPWR 0x0001 /* POWER LED enable */ +#define PCM990_CTRL_LEDBAS 0x0002 /* BASIS LED enable */ +#define PCM990_CTRL_LEDUSR 0x0004 /* USER LED enable */ + +#define PCM990_CTRL_REG3 0x0006 /* LCD CTRL REGISTER 3 */ +#define PCM990_CTRL_LCDPWR 0x0001 /* RW LCD Power on */ +#define PCM990_CTRL_LCDON 0x0002 /* RW LCD Latch on */ +#define PCM990_CTRL_LCDPOS1 0x0004 /* RW POS 1 */ +#define PCM990_CTRL_LCDPOS2 0x0008 /* RW POS 2 */ + +#define PCM990_CTRL_REG4 0x0008 /* MMC1 CTRL REGISTER 4 */ +#define PCM990_CTRL_MMC1PWR 0x0001 /* RW MMC1 Power on */ + +#define PCM990_CTRL_REG5 0x000A /* MMC2 CTRL REGISTER 5 */ +#define PCM990_CTRL_MMC2PWR 0x0001 /* RW MMC2 Power on */ +#define PCM990_CTRL_MMC2LED 0x0002 /* RW MMC2 LED */ +#define PCM990_CTRL_MMC2DE 0x0004 /* R MMC2 Card detect */ +#define PCM990_CTRL_MMC2WP 0x0008 /* R MMC2 Card write protect */ + +#define PCM990_CTRL_REG6 0x000C /* Interrupt Clear REGISTER */ +#define PCM990_CTRL_INTC0 0x0001 /* Clear Reg BT Detect */ +#define PCM990_CTRL_INTC1 0x0002 /* Clear Reg FR RI */ +#define PCM990_CTRL_INTC2 0x0004 /* Clear Reg MMC1 Detect */ +#define PCM990_CTRL_INTC3 0x0008 /* Clear Reg PM_5V off */ + +#define PCM990_CTRL_REG7 0x000E /* Interrupt Enable REGISTER */ +#define PCM990_CTRL_ENAINT0 0x0001 /* Enable Int BT Detect */ +#define PCM990_CTRL_ENAINT1 0x0002 /* Enable Int FR RI */ +#define PCM990_CTRL_ENAINT2 0x0004 /* Enable Int MMC1 Detect */ +#define PCM990_CTRL_ENAINT3 0x0008 /* Enable Int PM_5V off */ + +#define PCM990_CTRL_REG8 0x0014 /* Uart REGISTER */ +#define PCM990_CTRL_FFSD 0x0001 /* BT Uart Enable */ +#define PCM990_CTRL_BTSD 0x0002 /* FF Uart Enable */ +#define PCM990_CTRL_FFRI 0x0004 /* FF Uart RI detect */ +#define PCM990_CTRL_BTRX 0x0008 /* BT Uart Rx detect */ + +#define PCM990_CTRL_REG9 0x0010 /* AC97 Flash REGISTER */ +#define PCM990_CTRL_FLWP 0x0001 /* pC Flash Write Protect */ +#define PCM990_CTRL_FLDIS 0x0002 /* pC Flash Disable */ +#define PCM990_CTRL_AC97ENA 0x0004 /* Enable AC97 Expansion */ + +#define PCM990_CTRL_REG10 0x0012 /* GPS-REGISTER */ +#define PCM990_CTRL_GPSPWR 0x0004 /* GPS-Modul Power on */ +#define PCM990_CTRL_GPSENA 0x0008 /* GPS-Modul Enable */ + +#define PCM990_CTRL_REG11 0x0014 /* Accu REGISTER */ +#define PCM990_CTRL_ACENA 0x0001 /* Charge Enable */ +#define PCM990_CTRL_ACSEL 0x0002 /* Charge Akku -> DC Enable */ +#define PCM990_CTRL_ACPRES 0x0004 /* DC Present */ +#define PCM990_CTRL_ACALARM 0x0008 /* Error Akku */ + +#define PCM990_CTRL_P2V(x) ((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE) +#define PCM990_CTRL_V2P(x) ((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS) + +#ifndef __ASSEMBLY__ +# define __PCM990_CTRL_REG(x) \ + (*((volatile unsigned char *)PCM990_CTRL_P2V(x))) +#else +# define __PCM990_CTRL_REG(x) PCM990_CTRL_P2V(x) +#endif + +#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) +#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) +#define PCM990_CTRL0 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0) +#define PCM990_CTRL1 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1) +#define PCM990_CTRL2 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2) +#define PCM990_CTRL3 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) +#define PCM990_CTRL4 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4) +#define PCM990_CTRL5 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) +#define PCM990_CTRL6 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) +#define PCM990_CTRL7 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) +#define PCM990_CTRL8 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8) +#define PCM990_CTRL9 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9) +#define PCM990_CTRL10 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10) +#define PCM990_CTRL11 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11) + + +/* + * IDE + */ +#define PCM990_IDE_IRQ_GPIO 13 +#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO) +#define PCM990_IDE_IRQ_EDGE IRQT_RISING +#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */ +#define PCM990_IDE_PLD_BASE 0xee000000 +#define PCM990_IDE_PLD_SIZE (1*1024*1024) + +/* visible CPLD (U6) registers */ +#define PCM990_IDE_PLD_REG0 0x1000 /* OFFSET IDE REGISTER 0 */ +#define PCM990_IDE_PM5V 0x0004 /* R System VCC_5V */ +#define PCM990_IDE_STBY 0x0008 /* R System StandBy */ + +#define PCM990_IDE_PLD_REG1 0x1002 /* OFFSET IDE REGISTER 1 */ +#define PCM990_IDE_IDEMODE 0x0001 /* R TrueIDE Mode */ +#define PCM990_IDE_DMAENA 0x0004 /* RW DMA Enable */ +#define PCM990_IDE_DMA1_0 0x0008 /* RW 1=DREQ1 0=DREQ0 */ + +#define PCM990_IDE_PLD_REG2 0x1004 /* OFFSET IDE REGISTER 2 */ +#define PCM990_IDE_RESENA 0x0001 /* RW IDE Reset Bit enable */ +#define PCM990_IDE_RES 0x0002 /* RW IDE Reset Bit */ +#define PCM990_IDE_RDY 0x0008 /* RDY */ + +#define PCM990_IDE_PLD_REG3 0x1006 /* OFFSET IDE REGISTER 3 */ +#define PCM990_IDE_IDEOE 0x0001 /* RW Latch on Databus */ +#define PCM990_IDE_IDEON 0x0002 /* RW Latch on Control Address */ +#define PCM990_IDE_IDEIN 0x0004 /* RW Latch on Interrupt usw. */ + +#define PCM990_IDE_PLD_REG4 0x1008 /* OFFSET IDE REGISTER 4 */ +#define PCM990_IDE_PWRENA 0x0001 /* RW IDE Power enable */ +#define PCM990_IDE_5V 0x0002 /* R IDE Power 5V */ +#define PCM990_IDE_PWG 0x0008 /* R IDE Power is on */ + +#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE) +#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS) + +#ifndef __ASSEMBLY__ +# define __PCM990_IDE_PLD_REG(x) \ + (*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x))) +#else +# define __PCM990_IDE_PLD_REG(x) PCM990_IDE_PLD_P2V(x) +#endif + +#define PCM990_IDE0 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0) +#define PCM990_IDE1 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1) +#define PCM990_IDE2 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2) +#define PCM990_IDE3 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3) +#define PCM990_IDE4 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4) + +/* + * Compact Flash + */ +#define PCM990_CF_IRQ_GPIO 11 +#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO) +#define PCM990_CF_IRQ_EDGE IRQT_RISING + +#define PCM990_CF_CD_GPIO 12 +#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO) +#define PCM990_CF_CD_EDGE IRQT_RISING + +#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */ +#define PCM990_CF_PLD_BASE 0xef000000 +#define PCM990_CF_PLD_SIZE (1*1024*1024) +#define PCM990_CF_PLD_P2V(x) ((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE) +#define PCM990_CF_PLD_V2P(x) ((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS) + +/* visible CPLD (U6) registers */ +#define PCM990_CF_PLD_REG0 0x1000 /* OFFSET CF REGISTER 0 */ +#define PCM990_CF_REG0_LED 0x0001 /* RW LED on */ +#define PCM990_CF_REG0_BLK 0x0002 /* RW LED flash when access */ +#define PCM990_CF_REG0_PM5V 0x0004 /* R System VCC_5V enable */ +#define PCM990_CF_REG0_STBY 0x0008 /* R System StandBy */ + +#define PCM990_CF_PLD_REG1 0x1002 /* OFFSET CF REGISTER 1 */ +#define PCM990_CF_REG1_IDEMODE 0x0001 /* RW CF card run as TrueIDE */ +#define PCM990_CF_REG1_CF0 0x0002 /* RW CF card at ADDR 0x28000000 */ + +#define PCM990_CF_PLD_REG2 0x1004 /* OFFSET CF REGISTER 2 */ +#define PCM990_CF_REG2_RES 0x0002 /* RW CF RESET BIT */ +#define PCM990_CF_REG2_RDYENA 0x0004 /* RW Enable CF_RDY */ +#define PCM990_CF_REG2_RDY 0x0008 /* R CF_RDY auf PWAIT */ + +#define PCM990_CF_PLD_REG3 0x1006 /* OFFSET CF REGISTER 3 */ +#define PCM990_CF_REG3_CFOE 0x0001 /* RW Latch on Databus */ +#define PCM990_CF_REG3_CFON 0x0002 /* RW Latch on Control Address */ +#define PCM990_CF_REG3_CFIN 0x0004 /* RW Latch on Interrupt usw. */ +#define PCM990_CF_REG3_CFCD 0x0008 /* RW Latch on CD1/2 VS1/2 usw */ + +#define PCM990_CF_PLD_REG4 0x1008 /* OFFSET CF REGISTER 4 */ +#define PCM990_CF_REG4_PWRENA 0x0001 /* RW CF Power on (CD1/2 = "00") */ +#define PCM990_CF_REG4_5_3V 0x0002 /* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */ +#define PCM990_CF_REG4_3B 0x0004 /* RW 3.0V Backup from VCC (5_3V=0) */ +#define PCM990_CF_REG4_PWG 0x0008 /* R CF-Power is on */ + +#define PCM990_CF_PLD_REG5 0x100A /* OFFSET CF REGISTER 5 */ +#define PCM990_CF_REG5_BVD1 0x0001 /* R CF /BVD1 */ +#define PCM990_CF_REG5_BVD2 0x0002 /* R CF /BVD2 */ +#define PCM990_CF_REG5_VS1 0x0004 /* R CF /VS1 */ +#define PCM990_CF_REG5_VS2 0x0008 /* R CF /VS2 */ + +#define PCM990_CF_PLD_REG6 0x100C /* OFFSET CF REGISTER 6 */ +#define PCM990_CF_REG6_CD1 0x0001 /* R CF Card_Detect1 */ +#define PCM990_CF_REG6_CD2 0x0002 /* R CF Card_Detect2 */ + +#ifndef __ASSEMBLY__ +# define __PCM990_CF_PLD_REG(x) \ + (*((volatile unsigned char *)PCM990_CF_PLD_P2V(x))) +#else +# define __PCM990_CF_PLD_REG(x) PCM990_CF_PLD_P2V(x) +#endif + +#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0) +#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1) +#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2) +#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3) +#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4) +#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5) +#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6) + +/* + * Wolfson AC97 Touch + */ +#define PCM990_AC97_IRQ_GPIO 10 +#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO) +#define PCM990_AC97_IRQ_EDGE IRQT_RISING + +/* + * MMC phyCORE + */ +#define PCM990_MMC0_IRQ_GPIO 9 +#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO) +#define PCM990_MMC0_IRQ_EDGE IRQT_FALLING + +/* + * USB phyCore + */ +#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN) +#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT) diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 1bd398da07da..442494d71f12 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1597,176 +1597,10 @@ #define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ #define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ - /* - * SSP Serial Port Registers - * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different. - * PXA255, PXA26x and PXA27x have extra ports, registers and bits. + * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h */ - /* Common PXA2xx bits first */ -#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ -#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ -#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ -#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ -#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ -#define SSCR0_National (0x2 << 4) /* National Microwire */ -#define SSCR0_ECS (1 << 6) /* External clock select */ -#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ -#if defined(CONFIG_PXA25x) -#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ -#elif defined(CONFIG_PXA27x) -#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ -#define SSCR0_EDSS (1 << 20) /* Extended data size select */ -#define SSCR0_NCS (1 << 21) /* Network clock select */ -#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ -#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ -#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ -#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ -#define SSCR0_ADC (1 << 30) /* Audio clock select */ -#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ -#endif - -#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ -#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ -#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ -#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ -#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ -#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ -#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ -#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ -#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ -#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ - -#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ -#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ -#define SSSR_BSY (1 << 4) /* SSP Busy */ -#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ -#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ -#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ - -#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */ -#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */ -#define SSCR0_NCS (1 << 21) /* Network Clock Select */ -#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ - -/* extra bits in PXA255, PXA26x and PXA27x SSP ports */ -#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ -#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ -#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ -#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ -#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */ -#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */ -#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */ -#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */ -#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */ -#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */ -#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */ -#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */ -#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ -#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ -#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ -#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */ -#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ -#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ - -#define SSSR_BCE (1 << 23) /* Bit Count Error */ -#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */ -#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */ -#define SSSR_EOC (1 << 20) /* End Of Chain */ -#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ -#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ - -#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ -#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ -#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ -#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ -#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ -#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ -#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ -#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ -#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ - -#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ -#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ -#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ - -#define SSCR0_P1 __REG(0x41000000) /* SSP Port 1 Control Register 0 */ -#define SSCR1_P1 __REG(0x41000004) /* SSP Port 1 Control Register 1 */ -#define SSSR_P1 __REG(0x41000008) /* SSP Port 1 Status Register */ -#define SSITR_P1 __REG(0x4100000C) /* SSP Port 1 Interrupt Test Register */ -#define SSDR_P1 __REG(0x41000010) /* (Write / Read) SSP Port 1 Data Write Register/SSP Data Read Register */ - -/* Support existing PXA25x drivers */ -#define SSCR0 SSCR0_P1 /* SSP Control Register 0 */ -#define SSCR1 SSCR1_P1 /* SSP Control Register 1 */ -#define SSSR SSSR_P1 /* SSP Status Register */ -#define SSITR SSITR_P1 /* SSP Interrupt Test Register */ -#define SSDR SSDR_P1 /* (Write / Read) SSP Data Write Register/SSP Data Read Register */ - -/* PXA27x ports */ -#if defined (CONFIG_PXA27x) -#define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */ -#define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */ -#define SSTSA_P1 __REG(0x41000030) /* SSP Port 1 Tx Timeslot Active */ -#define SSRSA_P1 __REG(0x41000034) /* SSP Port 1 Rx Timeslot Active */ -#define SSTSS_P1 __REG(0x41000038) /* SSP Port 1 Timeslot Status */ -#define SSACD_P1 __REG(0x4100003C) /* SSP Port 1 Audio Clock Divider */ -#define SSCR0_P2 __REG(0x41700000) /* SSP Port 2 Control Register 0 */ -#define SSCR1_P2 __REG(0x41700004) /* SSP Port 2 Control Register 1 */ -#define SSSR_P2 __REG(0x41700008) /* SSP Port 2 Status Register */ -#define SSITR_P2 __REG(0x4170000C) /* SSP Port 2 Interrupt Test Register */ -#define SSDR_P2 __REG(0x41700010) /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */ -#define SSTO_P2 __REG(0x41700028) /* SSP Port 2 Time Out Register */ -#define SSPSP_P2 __REG(0x4170002C) /* SSP Port 2 Programmable Serial Protocol */ -#define SSTSA_P2 __REG(0x41700030) /* SSP Port 2 Tx Timeslot Active */ -#define SSRSA_P2 __REG(0x41700034) /* SSP Port 2 Rx Timeslot Active */ -#define SSTSS_P2 __REG(0x41700038) /* SSP Port 2 Timeslot Status */ -#define SSACD_P2 __REG(0x4170003C) /* SSP Port 2 Audio Clock Divider */ -#define SSCR0_P3 __REG(0x41900000) /* SSP Port 3 Control Register 0 */ -#define SSCR1_P3 __REG(0x41900004) /* SSP Port 3 Control Register 1 */ -#define SSSR_P3 __REG(0x41900008) /* SSP Port 3 Status Register */ -#define SSITR_P3 __REG(0x4190000C) /* SSP Port 3 Interrupt Test Register */ -#define SSDR_P3 __REG(0x41900010) /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */ -#define SSTO_P3 __REG(0x41900028) /* SSP Port 3 Time Out Register */ -#define SSPSP_P3 __REG(0x4190002C) /* SSP Port 3 Programmable Serial Protocol */ -#define SSTSA_P3 __REG(0x41900030) /* SSP Port 3 Tx Timeslot Active */ -#define SSRSA_P3 __REG(0x41900034) /* SSP Port 3 Rx Timeslot Active */ -#define SSTSS_P3 __REG(0x41900038) /* SSP Port 3 Timeslot Status */ -#define SSACD_P3 __REG(0x4190003C) /* SSP Port 3 Audio Clock Divider */ -#else /* PXA255 (only port 2) and PXA26x ports*/ -#define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */ -#define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */ -#define SSCR0_P2 __REG(0x41400000) /* SSP Port 2 Control Register 0 */ -#define SSCR1_P2 __REG(0x41400004) /* SSP Port 2 Control Register 1 */ -#define SSSR_P2 __REG(0x41400008) /* SSP Port 2 Status Register */ -#define SSITR_P2 __REG(0x4140000C) /* SSP Port 2 Interrupt Test Register */ -#define SSDR_P2 __REG(0x41400010) /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */ -#define SSTO_P2 __REG(0x41400028) /* SSP Port 2 Time Out Register */ -#define SSPSP_P2 __REG(0x4140002C) /* SSP Port 2 Programmable Serial Protocol */ -#define SSCR0_P3 __REG(0x41500000) /* SSP Port 3 Control Register 0 */ -#define SSCR1_P3 __REG(0x41500004) /* SSP Port 3 Control Register 1 */ -#define SSSR_P3 __REG(0x41500008) /* SSP Port 3 Status Register */ -#define SSITR_P3 __REG(0x4150000C) /* SSP Port 3 Interrupt Test Register */ -#define SSDR_P3 __REG(0x41500010) /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */ -#define SSTO_P3 __REG(0x41500028) /* SSP Port 3 Time Out Register */ -#define SSPSP_P3 __REG(0x4150002C) /* SSP Port 3 Programmable Serial Protocol */ -#endif - -#define SSCR0_P(x) (*(((x) == 1) ? &SSCR0_P1 : ((x) == 2) ? &SSCR0_P2 : ((x) == 3) ? &SSCR0_P3 : NULL)) -#define SSCR1_P(x) (*(((x) == 1) ? &SSCR1_P1 : ((x) == 2) ? &SSCR1_P2 : ((x) == 3) ? &SSCR1_P3 : NULL)) -#define SSSR_P(x) (*(((x) == 1) ? &SSSR_P1 : ((x) == 2) ? &SSSR_P2 : ((x) == 3) ? &SSSR_P3 : NULL)) -#define SSITR_P(x) (*(((x) == 1) ? &SSITR_P1 : ((x) == 2) ? &SSITR_P2 : ((x) == 3) ? &SSITR_P3 : NULL)) -#define SSDR_P(x) (*(((x) == 1) ? &SSDR_P1 : ((x) == 2) ? &SSDR_P2 : ((x) == 3) ? &SSDR_P3 : NULL)) -#define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL)) -#define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL)) -#define SSTSA_P(x) (*(((x) == 1) ? &SSTSA_P1 : ((x) == 2) ? &SSTSA_P2 : ((x) == 3) ? &SSTSA_P3 : NULL)) -#define SSRSA_P(x) (*(((x) == 1) ? &SSRSA_P1 : ((x) == 2) ? &SSRSA_P2 : ((x) == 3) ? &SSRSA_P3 : NULL)) -#define SSTSS_P(x) (*(((x) == 1) ? &SSTSS_P1 : ((x) == 2) ? &SSTSS_P2 : ((x) == 3) ? &SSTSS_P3 : NULL)) -#define SSACD_P(x) (*(((x) == 1) ? &SSACD_P1 : ((x) == 2) ? &SSACD_P2 : ((x) == 3) ? &SSACD_P3 : NULL)) - /* * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h */ @@ -2014,71 +1848,8 @@ #define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ -/* - * Memory controller - */ - -#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ -#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ -#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ -#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ -#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ -#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ -#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ -#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ -#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ -#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ -#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ -#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ -#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ -#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ -#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ -#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ -#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ - -/* - * More handy macros for PCMCIA - * - * Arg is socket number - */ -#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */ -#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */ -#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */ - -/* MECR register defines */ -#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */ -#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */ - -#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */ -#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ -#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ -#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ -#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */ -#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */ -#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */ -#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */ -#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */ -#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */ -#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */ -#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ -#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ -#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ - - #ifdef CONFIG_PXA27x -#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ - -#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ -#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ -#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ -#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ -#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ -#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ -#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ -#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ -#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ - /* * Keypad */ @@ -2135,74 +1906,6 @@ #define KPAS_SO (0x1 << 31) #define KPASMKPx_SO (0x1 << 31) -/* - * UHC: USB Host Controller (OHCI-like) register definitions - */ -#define UHC_BASE_PHYS (0x4C000000) -#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */ -#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */ -#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */ -#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */ -#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */ -#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */ -#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */ -#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */ -#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */ -#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */ -#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */ -#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */ -#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */ -#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */ -#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */ -#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ -#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ -#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ - -#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ -#define UHCRHDA_NOCP (1 << 12) /* No over current protection */ - -#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ -#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ -#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ -#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */ -#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */ - -#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */ -#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ -#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ -#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ -#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ -#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ -#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ -#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ -#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ -#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ - -#define UHCHR __REG(0x4C000064) /* UHC Reset Register */ -#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ -#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ -#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ -#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ -#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ -#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ -#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ -#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ -#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ -#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ -#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ - -#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/ -#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ -#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ -#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ -#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ -#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort - Interrupt Enable*/ -#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ -#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ - -#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */ - /* Camera Interface */ #define CICR0 __REG(0x50000000) #define CICR1 __REG(0x50000004) @@ -2350,6 +2053,77 @@ #endif +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) +/* + * UHC: USB Host Controller (OHCI-like) register definitions + */ +#define UHC_BASE_PHYS (0x4C000000) +#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */ +#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */ +#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */ +#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */ +#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */ +#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */ +#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */ +#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */ +#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */ +#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */ +#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */ +#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */ +#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */ +#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */ +#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */ +#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ +#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ +#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ + +#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ +#define UHCRHDA_NOCP (1 << 12) /* No over current protection */ + +#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ +#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ +#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ +#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */ +#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */ + +#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */ +#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ +#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ +#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ +#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ +#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ +#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ +#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ +#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ +#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ + +#define UHCHR __REG(0x4C000064) /* UHC Reset Register */ +#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ +#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ +#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ +#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ +#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ +#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ +#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ +#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ +#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ +#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ +#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ + +#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/ +#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ +#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ +#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ +#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ +#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort + Interrupt Enable*/ +#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ +#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ + +#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */ + +#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ + /* PWRMODE register M field values */ #define PWRMODE_IDLE 0x1 diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/include/asm-arm/arch-pxa/pxa2xx-regs.h new file mode 100644 index 000000000000..9553b54fa5bc --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa2xx-regs.h @@ -0,0 +1,84 @@ +/* + * linux/include/asm-arm/arch-pxa/pxa2xx-regs.h + * + * Taken from pxa-regs.h by Russell King + * + * Author: Nicolas Pitre + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PXA2XX_REGS_H +#define __PXA2XX_REGS_H + +/* + * Memory controller + */ + +#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ +#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ +#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ +#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ +#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ +#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ +#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ +#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ +#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ +#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ +#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ +#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ +#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ +#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ +#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ +#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ +#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ + +/* + * More handy macros for PCMCIA + * + * Arg is socket number + */ +#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */ +#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */ +#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */ + +/* MECR register defines */ +#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */ +#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */ + +#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */ +#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ +#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ +#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ +#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */ +#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */ +#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */ +#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */ +#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */ +#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */ +#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */ +#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ +#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ +#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ + + +#ifdef CONFIG_PXA27x + +#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ + +#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ +#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ +#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ +#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ +#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ +#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ +#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ +#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ +#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ + +#endif + +#endif diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h index acc7ec7a84a1..3459fb26ce97 100644 --- a/include/asm-arm/arch-pxa/pxa2xx_spi.h +++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h @@ -22,32 +22,8 @@ #define PXA2XX_CS_ASSERT (0x01) #define PXA2XX_CS_DEASSERT (0x02) -#if defined(CONFIG_PXA25x) -#define CLOCK_SPEED_HZ 3686400 -#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00) -#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#elif defined(CONFIG_PXA27x) -#define CLOCK_SPEED_HZ 13000000 -#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#endif - -#define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1))))) -#define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2))))) -#define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3))))) - -enum pxa_ssp_type { - SSP_UNDEFINED = 0, - PXA25x_SSP, /* pxa 210, 250, 255, 26x */ - PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ - PXA27x_SSP, -}; - /* device.platform_data for SSP controller devices */ struct pxa2xx_spi_master { - enum pxa_ssp_type ssp_type; u32 clock_enable; u16 num_chipselect; u8 enable_dma; diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h index 3900a0ca0bc0..66d54119757c 100644 --- a/include/asm-arm/arch-pxa/pxa3xx-regs.h +++ b/include/asm-arm/arch-pxa/pxa3xx-regs.h @@ -14,6 +14,92 @@ #define __ASM_ARCH_PXA3XX_REGS_H /* + * Slave Power Managment Unit + */ +#define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ +#define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ +#define AD3ER __REG(0x40f40008) /* Application Subsystem Wake-Up from D3 Enable */ +#define AD3SR __REG(0x40f4000c) /* Application Subsystem Wake-Up from D3 Status */ +#define AD2D0ER __REG(0x40f40010) /* Application Subsystem Wake-Up from D2 to D0 Enable */ +#define AD2D0SR __REG(0x40f40014) /* Application Subsystem Wake-Up from D2 to D0 Status */ +#define AD2D1ER __REG(0x40f40018) /* Application Subsystem Wake-Up from D2 to D1 Enable */ +#define AD2D1SR __REG(0x40f4001c) /* Application Subsystem Wake-Up from D2 to D1 Status */ +#define AD1D0ER __REG(0x40f40020) /* Application Subsystem Wake-Up from D1 to D0 Enable */ +#define AD1D0SR __REG(0x40f40024) /* Application Subsystem Wake-Up from D1 to D0 Status */ +#define AGENP __REG(0x40f4002c) /* Application Subsystem General Purpose */ +#define AD3R __REG(0x40f40030) /* Application Subsystem D3 Configuration */ +#define AD2R __REG(0x40f40034) /* Application Subsystem D2 Configuration */ +#define AD1R __REG(0x40f40038) /* Application Subsystem D1 Configuration */ + +/* + * Application Subsystem Configuration bits. + */ +#define ASCR_RDH (1 << 31) +#define ASCR_D1S (1 << 2) +#define ASCR_D2S (1 << 1) +#define ASCR_D3S (1 << 0) + +/* + * Application Reset Status bits. + */ +#define ARSR_GPR (1 << 3) +#define ARSR_LPMR (1 << 2) +#define ARSR_WDT (1 << 1) +#define ARSR_HWR (1 << 0) + +/* + * Application Subsystem Wake-Up bits. + */ +#define ADXER_WRTC (1 << 31) /* RTC */ +#define ADXER_WOST (1 << 30) /* OS Timer */ +#define ADXER_WTSI (1 << 29) /* Touchscreen */ +#define ADXER_WUSBH (1 << 28) /* USB host */ +#define ADXER_WUSB2 (1 << 26) /* USB client 2.0 */ +#define ADXER_WMSL0 (1 << 24) /* MSL port 0*/ +#define ADXER_WDMUX3 (1 << 23) /* USB EDMUX3 */ +#define ADXER_WDMUX2 (1 << 22) /* USB EDMUX2 */ +#define ADXER_WKP (1 << 21) /* Keypad */ +#define ADXER_WUSIM1 (1 << 20) /* USIM Port 1 */ +#define ADXER_WUSIM0 (1 << 19) /* USIM Port 0 */ +#define ADXER_WOTG (1 << 16) /* USBOTG input */ +#define ADXER_MFP_WFLASH (1 << 15) /* MFP: Data flash busy */ +#define ADXER_MFP_GEN12 (1 << 14) /* MFP: MMC3/GPIO/OST inputs */ +#define ADXER_MFP_WMMC2 (1 << 13) /* MFP: MMC2 */ +#define ADXER_MFP_WMMC1 (1 << 12) /* MFP: MMC1 */ +#define ADXER_MFP_WI2C (1 << 11) /* MFP: I2C */ +#define ADXER_MFP_WSSP4 (1 << 10) /* MFP: SSP4 */ +#define ADXER_MFP_WSSP3 (1 << 9) /* MFP: SSP3 */ +#define ADXER_MFP_WMAXTRIX (1 << 8) /* MFP: matrix keypad */ +#define ADXER_MFP_WUART3 (1 << 7) /* MFP: UART3 */ +#define ADXER_MFP_WUART2 (1 << 6) /* MFP: UART2 */ +#define ADXER_MFP_WUART1 (1 << 5) /* MFP: UART1 */ +#define ADXER_MFP_WSSP2 (1 << 4) /* MFP: SSP2 */ +#define ADXER_MFP_WSSP1 (1 << 3) /* MFP: SSP1 */ +#define ADXER_MFP_WAC97 (1 << 2) /* MFP: AC97 */ +#define ADXER_WEXTWAKE1 (1 << 1) /* External Wake 1 */ +#define ADXER_WEXTWAKE0 (1 << 0) /* External Wake 0 */ + +/* + * AD3R/AD2R/AD1R bits. R2-R5 are only defined for PXA320. + */ +#define ADXR_L2 (1 << 8) +#define ADXR_R5 (1 << 5) +#define ADXR_R4 (1 << 4) +#define ADXR_R3 (1 << 3) +#define ADXR_R2 (1 << 2) +#define ADXR_R1 (1 << 1) +#define ADXR_R0 (1 << 0) + +/* + * Values for PWRMODE CP15 register + */ +#define PXA3xx_PM_S3D4C4 0x07 /* aka deep sleep */ +#define PXA3xx_PM_S2D3C4 0x06 /* aka sleep */ +#define PXA3xx_PM_S0D2C2 0x03 /* aka standby */ +#define PXA3xx_PM_S0D1C2 0x02 /* aka LCD refresh */ +#define PXA3xx_PM_S0D0C1 0x01 + +/* * Application Subsystem Clock */ #define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/include/asm-arm/arch-pxa/regs-ssp.h new file mode 100644 index 000000000000..991cb688db75 --- /dev/null +++ b/include/asm-arm/arch-pxa/regs-ssp.h @@ -0,0 +1,112 @@ +#ifndef __ASM_ARCH_REGS_SSP_H +#define __ASM_ARCH_REGS_SSP_H + +/* + * SSP Serial Port Registers + * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different. + * PXA255, PXA26x and PXA27x have extra ports, registers and bits. + */ + +#define SSCR0 (0x00) /* SSP Control Register 0 */ +#define SSCR1 (0x04) /* SSP Control Register 1 */ +#define SSSR (0x08) /* SSP Status Register */ +#define SSITR (0x0C) /* SSP Interrupt Test Register */ +#define SSDR (0x10) /* SSP Data Write/Data Read Register */ + +#define SSTO (0x28) /* SSP Time Out Register */ +#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */ +#define SSTSA (0x30) /* SSP Tx Timeslot Active */ +#define SSRSA (0x34) /* SSP Rx Timeslot Active */ +#define SSTSS (0x38) /* SSP Timeslot Status */ +#define SSACD (0x3C) /* SSP Audio Clock Divider */ + +/* Common PXA2xx bits first */ +#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ +#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ +#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ +#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ +#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ +#define SSCR0_National (0x2 << 4) /* National Microwire */ +#define SSCR0_ECS (1 << 6) /* External clock select */ +#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ +#if defined(CONFIG_PXA25x) +#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ +#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ +#elif defined(CONFIG_PXA27x) +#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ +#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ +#define SSCR0_EDSS (1 << 20) /* Extended data size select */ +#define SSCR0_NCS (1 << 21) /* Network clock select */ +#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ +#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ +#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ +#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ +#define SSCR0_ADC (1 << 30) /* Audio clock select */ +#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ +#endif + +#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ +#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ +#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ +#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ +#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ +#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ +#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ +#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ +#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ +#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ + +#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ +#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ +#define SSSR_BSY (1 << 4) /* SSP Busy */ +#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ +#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ +#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ + +#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */ +#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */ +#define SSCR0_NCS (1 << 21) /* Network Clock Select */ +#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ + +/* extra bits in PXA255, PXA26x and PXA27x SSP ports */ +#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ +#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ +#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ +#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ +#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */ +#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */ +#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */ +#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */ +#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */ +#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */ +#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */ +#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */ +#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ +#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ +#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ +#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */ +#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ +#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ + +#define SSSR_BCE (1 << 23) /* Bit Count Error */ +#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */ +#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */ +#define SSSR_EOC (1 << 20) /* End Of Chain */ +#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ +#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ + +#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ +#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ +#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ +#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ +#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ +#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ +#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ +#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ +#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ + +#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ +#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ +#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ + +#endif /* __ASM_ARCH_REGS_SSP_H */ diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/include/asm-arm/arch-pxa/sharpsl.h index 2b0fe773213a..3b1d4a72d4d1 100644 --- a/include/asm-arm/arch-pxa/sharpsl.h +++ b/include/asm-arm/arch-pxa/sharpsl.h @@ -16,7 +16,7 @@ int corgi_ssp_max1111_get(unsigned long data); */ struct corgits_machinfo { - unsigned long (*get_hsync_len)(void); + unsigned long (*get_hsync_invperiod)(void); void (*put_hsync)(void); void (*wait_hsync)(void); }; diff --git a/include/asm-arm/arch-pxa/spitz.h b/include/asm-arm/arch-pxa/spitz.h index 4953dd324d4d..bd14365f7ed5 100644 --- a/include/asm-arm/arch-pxa/spitz.h +++ b/include/asm-arm/arch-pxa/spitz.h @@ -156,5 +156,3 @@ extern struct platform_device spitzscoop_device; extern struct platform_device spitzscoop2_device; extern struct platform_device spitzssp_device; extern struct sharpsl_charger_machinfo spitz_pm_machinfo; - -extern void spitz_lcd_power(int on, struct fb_var_screeninfo *var); diff --git a/include/asm-arm/arch-pxa/ssp.h b/include/asm-arm/arch-pxa/ssp.h index ea200551a75f..a012882c9ee6 100644 --- a/include/asm-arm/arch-pxa/ssp.h +++ b/include/asm-arm/arch-pxa/ssp.h @@ -13,10 +13,37 @@ * PXA255 SSP, NSSP * PXA26x SSP, NSSP, ASSP * PXA27x SSP1, SSP2, SSP3 + * PXA3xx SSP1, SSP2, SSP3, SSP4 */ -#ifndef SSP_H -#define SSP_H +#ifndef __ASM_ARCH_SSP_H +#define __ASM_ARCH_SSP_H + +#include <linux/list.h> + +enum pxa_ssp_type { + SSP_UNDEFINED = 0, + PXA25x_SSP, /* pxa 210, 250, 255, 26x */ + PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ + PXA27x_SSP, +}; + +struct ssp_device { + struct platform_device *pdev; + struct list_head node; + + struct clk *clk; + void __iomem *mmio_base; + unsigned long phys_base; + + const char *label; + int port_id; + int type; + int use_count; + int irq; + int drcmr_rx; + int drcmr_tx; +}; /* * SSP initialisation flags @@ -31,6 +58,7 @@ struct ssp_state { }; struct ssp_dev { + struct ssp_device *ssp; u32 port; u32 mode; u32 flags; @@ -50,4 +78,6 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags); int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed); void ssp_exit(struct ssp_dev *dev); -#endif +struct ssp_device *ssp_request(int port, const char *label); +void ssp_free(struct ssp_device *); +#endif /* __ASM_ARCH_SSP_H */ diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h index 178aa2e073ac..dadf4c20b622 100644 --- a/include/asm-arm/arch-pxa/uncompress.h +++ b/include/asm-arm/arch-pxa/uncompress.h @@ -9,19 +9,21 @@ * published by the Free Software Foundation. */ -#define FFUART ((volatile unsigned long *)0x40100000) -#define BTUART ((volatile unsigned long *)0x40200000) -#define STUART ((volatile unsigned long *)0x40700000) -#define HWUART ((volatile unsigned long *)0x41600000) +#include <linux/serial_reg.h> +#include <asm/arch/pxa-regs.h> + +#define __REG(x) ((volatile unsigned long *)x) #define UART FFUART static inline void putc(char c) { - while (!(UART[5] & 0x20)) + if (!(UART[UART_IER] & IER_UUE)) + return; + while (!(UART[UART_LSR] & LSR_TDRQ)) barrier(); - UART[0] = c; + UART[UART_TX] = c; } /* diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h index f58b59162b82..5f717d64ea7d 100644 --- a/include/asm-arm/arch-pxa/zylonite.h +++ b/include/asm-arm/arch-pxa/zylonite.h @@ -3,9 +3,18 @@ #define ZYLONITE_ETH_PHYS 0x14000000 +#define EXT_GPIO(x) (128 + (x)) + /* the following variables are processor specific and initialized * by the corresponding zylonite_pxa3xx_init() */ +struct platform_mmc_slot { + int gpio_cd; + int gpio_wp; +}; + +extern struct platform_mmc_slot zylonite_mmc_slot[]; + extern int gpio_backlight; extern int gpio_eth_irq; diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S index 9c8cd9abb82b..89076c322726 100644 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ b/include/asm-arm/arch-s3c2410/debug-macro.S @@ -92,11 +92,9 @@ #if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY) #define fifo_full fifo_full_s3c2410 #define fifo_level fifo_level_s3c2410 -#warning 2410only #elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY) #define fifo_full fifo_full_s3c24xx #define fifo_level fifo_level_s3c24xx -#warning generic #endif /* include the reset of the code which will do the work */ diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h index c6e8d8f64938..4f291d9b7d93 100644 --- a/include/asm-arm/arch-s3c2410/dma.h +++ b/include/asm-arm/arch-s3c2410/dma.h @@ -214,6 +214,7 @@ struct s3c2410_dma_chan { unsigned long dev_addr; unsigned long load_timeout; unsigned int flags; /* channel flags */ + unsigned int hw_cfg; /* last hw config */ struct s3c24xx_dma_map *map; /* channel hw maps */ diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h index 6dadf58ff984..29592c3ebf22 100644 --- a/include/asm-arm/arch-s3c2410/hardware.h +++ b/include/asm-arm/arch-s3c2410/hardware.h @@ -50,6 +50,17 @@ extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); extern int s3c2410_gpio_getirq(unsigned int pin); +/* s3c2410_gpio_irq2pin + * + * turn the given irq number into the corresponding GPIO number + * + * returns: + * < 0 = no pin + * >=0 = gpio pin number +*/ + +extern int s3c2410_gpio_irq2pin(unsigned int irq); + #ifdef CONFIG_CPU_S3C2400 extern int s3c2400_gpio_getirq(unsigned int pin); @@ -87,6 +98,18 @@ extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); +/* s3c2410_gpio_getpull + * + * Read the state of the pull-up on a given pin + * + * return: + * < 0 => error code + * 0 => enabled + * 1 => disabled +*/ + +extern int s3c2410_gpio_getpull(unsigned int pin); + extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); extern unsigned int s3c2410_gpio_getpin(unsigned int pin); @@ -99,6 +122,11 @@ extern int s3c2440_set_dsc(unsigned int pin, unsigned int value); #endif /* CONFIG_CPU_S3C2440 */ +#ifdef CONFIG_CPU_S3C2412 + +extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state); + +#endif /* CONFIG_CPU_S3C2412 */ #endif /* __ASSEMBLY__ */ diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h index 996f65488d2d..d858b3eb5547 100644 --- a/include/asm-arm/arch-s3c2410/irqs.h +++ b/include/asm-arm/arch-s3c2410/irqs.h @@ -160,4 +160,7 @@ #define NR_IRQS (IRQ_S3C2440_AC97+1) #endif +/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */ +#define FIQ_START IRQ_EINT0 + #endif /* __ASM_ARCH_IRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h index e39656b7a086..dba9df9d8713 100644 --- a/include/asm-arm/arch-s3c2410/regs-clock.h +++ b/include/asm-arm/arch-s3c2410/regs-clock.h @@ -138,6 +138,8 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) #define S3C2412_CLKDIVN_PDIVN (1<<2) #define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) #define S3C2421_CLKDIVN_ARMDIVN (1<<3) +#define S3C2412_CLKDIVN_DVSEN (1<<4) +#define S3C2412_CLKDIVN_HALFHCLK (1<<5) #define S3C2412_CLKDIVN_USB48DIV (1<<6) #define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8) #define S3C2412_CLKDIVN_UARTDIV_SHIFT (8) diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h index c0748511edbc..1235df70f34e 100644 --- a/include/asm-arm/arch-s3c2410/regs-dsc.h +++ b/include/asm-arm/arch-s3c2410/regs-dsc.h @@ -19,7 +19,7 @@ #define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) #endif -#if defined(CONFIG_CPU_S3C2440) +#if defined(CONFIG_CPU_S3C244X) #define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) #define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index b693158b2d3c..0ad75d716ded 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -1133,12 +1133,16 @@ #define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C) #define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C) #define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C) -#define S3C2412_GPESLPCON S3C2410_GPIOREG(0x4C) #define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C) #define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C) #define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C) /* definitions for each pin bit */ +#define S3C2412_GPIO_SLPCON_LOW ( 0x00 ) +#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 ) +#define S3C2412_GPIO_SLPCON_IN ( 0x02 ) +#define S3C2412_GPIO_SLPCON_PULL ( 0x03 ) + #define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2)) #define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2)) #define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2)) diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h index e4d82341f7ba..312ff93b63c6 100644 --- a/include/asm-arm/arch-s3c2410/regs-mem.h +++ b/include/asm-arm/arch-s3c2410/regs-mem.h @@ -98,16 +98,19 @@ #define S3C2410_BANKCON_Tacp3 (0x1 << 2) #define S3C2410_BANKCON_Tacp4 (0x2 << 2) #define S3C2410_BANKCON_Tacp6 (0x3 << 2) +#define S3C2410_BANKCON_Tacp_SHIFT (2) #define S3C2410_BANKCON_Tcah0 (0x0 << 4) #define S3C2410_BANKCON_Tcah1 (0x1 << 4) #define S3C2410_BANKCON_Tcah2 (0x2 << 4) #define S3C2410_BANKCON_Tcah4 (0x3 << 4) +#define S3C2410_BANKCON_Tcah_SHIFT (4) #define S3C2410_BANKCON_Tcoh0 (0x0 << 6) #define S3C2410_BANKCON_Tcoh1 (0x1 << 6) #define S3C2410_BANKCON_Tcoh2 (0x2 << 6) #define S3C2410_BANKCON_Tcoh4 (0x3 << 6) +#define S3C2410_BANKCON_Tcoh_SHIFT (6) #define S3C2410_BANKCON_Tacc1 (0x0 << 8) #define S3C2410_BANKCON_Tacc2 (0x1 << 8) @@ -117,16 +120,19 @@ #define S3C2410_BANKCON_Tacc8 (0x5 << 8) #define S3C2410_BANKCON_Tacc10 (0x6 << 8) #define S3C2410_BANKCON_Tacc14 (0x7 << 8) +#define S3C2410_BANKCON_Tacc_SHIFT (8) #define S3C2410_BANKCON_Tcos0 (0x0 << 11) #define S3C2410_BANKCON_Tcos1 (0x1 << 11) #define S3C2410_BANKCON_Tcos2 (0x2 << 11) #define S3C2410_BANKCON_Tcos4 (0x3 << 11) +#define S3C2410_BANKCON_Tcos_SHIFT (11) #define S3C2410_BANKCON_Tacs0 (0x0 << 13) #define S3C2410_BANKCON_Tacs1 (0x1 << 13) #define S3C2410_BANKCON_Tacs2 (0x2 << 13) #define S3C2410_BANKCON_Tacs4 (0x3 << 13) +#define S3C2410_BANKCON_Tacs_SHIFT (13) #define S3C2410_BANKCON_SRAM (0x0 << 15) #define S3C2400_BANKCON_EDODRAM (0x2 << 15) diff --git a/include/asm-arm/arch-s3c2410/regs-power.h b/include/asm-arm/arch-s3c2410/regs-power.h index f79987be55e8..13d13b7cfe98 100644 --- a/include/asm-arm/arch-s3c2410/regs-power.h +++ b/include/asm-arm/arch-s3c2410/regs-power.h @@ -23,7 +23,8 @@ #define S3C2412_INFORM2 S3C24XX_PWRREG(0x78) #define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C) -#define S3C2412_PWRCFG_BATF_IGNORE (0<<0) +#define S3C2412_PWRCFG_BATF_IRQ (1<<0) +#define S3C2412_PWRCFG_BATF_IGNORE (2<<0) #define S3C2412_PWRCFG_BATF_SLEEP (3<<0) #define S3C2412_PWRCFG_BATF_MASK (3<<0) diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h index 63891786dfa0..14de4e596f87 100644 --- a/include/asm-arm/arch-s3c2410/system.h +++ b/include/asm-arm/arch-s3c2410/system.h @@ -20,6 +20,9 @@ #include <asm/plat-s3c/regs-watchdog.h> #include <asm/arch/regs-clock.h> +#include <linux/clk.h> +#include <linux/err.h> + void (*s3c24xx_idle)(void); void (*s3c24xx_reset_hook)(void); @@ -59,6 +62,8 @@ static void arch_idle(void) static void arch_reset(char mode) { + struct clk *wdtclk; + if (mode == 's') { cpu_reset(0); } @@ -70,19 +75,28 @@ arch_reset(char mode) __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ + wdtclk = clk_get(NULL, "watchdog"); + if (!IS_ERR(wdtclk)) { + clk_enable(wdtclk); + } else + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + /* put initial values into count and data */ - __raw_writel(0x100, S3C2410_WTCNT); - __raw_writel(0x100, S3C2410_WTDAT); + __raw_writel(0x80, S3C2410_WTCNT); + __raw_writel(0x80, S3C2410_WTDAT); /* set the watchdog to go and reset... */ __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); /* wait for reset to assert... */ - mdelay(5000); + mdelay(500); printk(KERN_ERR "Watchdog reset failed to assert reset\n"); + /* delay to allow the serial port to show the message */ + mdelay(50); + /* we'll take a jump through zero as a poor second */ cpu_reset(0); } diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 6c1c968b2987..759a97b56eed 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -94,6 +94,14 @@ # endif #endif +#if defined(CONFIG_CPU_FEROCEON) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE feroceon +# endif +#endif + #if defined(CONFIG_CPU_V6) //# ifdef _CACHE # define MULTI_CACHE 1 diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h index f31cda5a55ee..392eb5332323 100644 --- a/include/asm-arm/fpstate.h +++ b/include/asm-arm/fpstate.h @@ -17,14 +17,18 @@ /* * VFP storage area has: * - FPEXC, FPSCR, FPINST and FPINST2. - * - 16 double precision data registers - * - an implementation-dependant word of state for FLDMX/FSTMX + * - 16 or 32 double precision data registers + * - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6) * * FPEXC will always be non-zero once the VFP has been used in this process. */ struct vfp_hard_struct { +#ifdef CONFIG_VFPv3 + __u64 fpregs[32]; +#else __u64 fpregs[16]; +#endif #if __LINUX_ARM_ARCH__ < 6 __u32 fpmx_state; #endif @@ -35,6 +39,7 @@ struct vfp_hard_struct { */ __u32 fpinst; __u32 fpinst2; + #ifdef CONFIG_SMP __u32 cpu; #endif diff --git a/include/asm-arm/kprobes.h b/include/asm-arm/kprobes.h new file mode 100644 index 000000000000..4e7bd32288ae --- /dev/null +++ b/include/asm-arm/kprobes.h @@ -0,0 +1,79 @@ +/* + * include/asm-arm/kprobes.h + * + * Copyright (C) 2006, 2007 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef _ARM_KPROBES_H +#define _ARM_KPROBES_H + +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/percpu.h> + +#define ARCH_SUPPORTS_KRETPROBES +#define __ARCH_WANT_KPROBES_INSN_SLOT +#define MAX_INSN_SIZE 2 +#define MAX_STACK_SIZE 64 /* 32 would probably be OK */ + +/* + * This undefined instruction must be unique and + * reserved solely for kprobes' use. + */ +#define KPROBE_BREAKPOINT_INSTRUCTION 0xe7f001f8 + +#define regs_return_value(regs) ((regs)->ARM_r0) +#define flush_insn_slot(p) do { } while (0) +#define kretprobe_blacklist_size 0 + +typedef u32 kprobe_opcode_t; + +struct kprobe; +typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *); + +/* Architecture specific copy of original instruction. */ +struct arch_specific_insn { + kprobe_opcode_t *insn; + kprobe_insn_handler_t *insn_handler; +}; + +struct prev_kprobe { + struct kprobe *kp; + unsigned int status; +}; + +/* per-cpu kprobe control block */ +struct kprobe_ctlblk { + unsigned int kprobe_status; + struct prev_kprobe prev_kprobe; + struct pt_regs jprobe_saved_regs; + char jprobes_stack[MAX_STACK_SIZE]; +}; + +void arch_remove_kprobe(struct kprobe *); + +int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr); +int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr); +int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); + +enum kprobe_insn { + INSN_REJECTED, + INSN_GOOD, + INSN_GOOD_NO_SLOT +}; + +enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t, + struct arch_specific_insn *); +void __init arm_kprobe_decode_init(void); + +#endif /* _ARM_KPROBES_H */ diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h index 2c59406435e5..c78efe316fc8 100644 --- a/include/asm-arm/plat-s3c24xx/dma.h +++ b/include/asm-arm/plat-s3c24xx/dma.h @@ -32,6 +32,7 @@ struct s3c24xx_dma_map { struct s3c24xx_dma_addr hw_addr; unsigned long channels[S3C2410_DMA_CHANNELS]; + unsigned long channels_rx[S3C2410_DMA_CHANNELS]; }; struct s3c24xx_dma_selection { @@ -41,6 +42,10 @@ struct s3c24xx_dma_selection { void (*select)(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map); + + void (*direction)(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map, + enum s3c2410_dmasrc dir); }; extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); diff --git a/include/asm-arm/plat-s3c24xx/irq.h b/include/asm-arm/plat-s3c24xx/irq.h index 8af6d9579b31..45746a995343 100644 --- a/include/asm-arm/plat-s3c24xx/irq.h +++ b/include/asm-arm/plat-s3c24xx/irq.h @@ -15,7 +15,9 @@ #define EXTINT_OFF (IRQ_EINT4 - 4) +/* these are exported for arch/arm/mach-* usage */ extern struct irq_chip s3c_irq_level_chip; +extern struct irq_chip s3c_irq_chip; static inline void s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, diff --git a/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h b/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h new file mode 100644 index 000000000000..25d4058bcfed --- /dev/null +++ b/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h @@ -0,0 +1,72 @@ +/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h + * + * Copyright 2007 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2412 IIS register definition +*/ + +#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H +#define __ASM_ARCH_REGS_S3C2412_IIS_H + +#define S3C2412_IISCON (0x00) +#define S3C2412_IISMOD (0x04) +#define S3C2412_IISFIC (0x08) +#define S3C2412_IISPSR (0x0C) +#define S3C2412_IISTXD (0x10) +#define S3C2412_IISRXD (0x14) + +#define S3C2412_IISCON_LRINDEX (1 << 11) +#define S3C2412_IISCON_TXFIFO_EMPTY (1 << 10) +#define S3C2412_IISCON_RXFIFO_EMPTY (1 << 9) +#define S3C2412_IISCON_TXFIFO_FULL (1 << 8) +#define S3C2412_IISCON_RXFIFO_FULL (1 << 7) +#define S3C2412_IISCON_TXDMA_PAUSE (1 << 6) +#define S3C2412_IISCON_RXDMA_PAUSE (1 << 5) +#define S3C2412_IISCON_TXCH_PAUSE (1 << 4) +#define S3C2412_IISCON_RXCH_PAUSE (1 << 3) +#define S3C2412_IISCON_TXDMA_ACTIVE (1 << 2) +#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) +#define S3C2412_IISCON_IIS_ACTIVE (1 << 0) + +#define S3C2412_IISMOD_MASTER_INTERNAL (0 << 10) +#define S3C2412_IISMOD_MASTER_EXTERNAL (1 << 10) +#define S3C2412_IISMOD_SLAVE (2 << 10) +#define S3C2412_IISMOD_MASTER_MASK (3 << 10) +#define S3C2412_IISMOD_MODE_TXONLY (0 << 8) +#define S3C2412_IISMOD_MODE_RXONLY (1 << 8) +#define S3C2412_IISMOD_MODE_TXRX (2 << 8) +#define S3C2412_IISMOD_MODE_MASK (3 << 8) +#define S3C2412_IISMOD_LR_LLOW (0 << 7) +#define S3C2412_IISMOD_LR_RLOW (1 << 7) +#define S3C2412_IISMOD_SDF_IIS (0 << 5) +#define S3C2412_IISMOD_SDF_MSB (0 << 5) +#define S3C2412_IISMOD_SDF_LSB (0 << 5) +#define S3C2412_IISMOD_SDF_MASK (3 << 5) +#define S3C2412_IISMOD_RCLK_256FS (0 << 3) +#define S3C2412_IISMOD_RCLK_512FS (1 << 3) +#define S3C2412_IISMOD_RCLK_384FS (2 << 3) +#define S3C2412_IISMOD_RCLK_768FS (3 << 3) +#define S3C2412_IISMOD_RCLK_MASK (3 << 3) +#define S3C2412_IISMOD_BCLK_32FS (0 << 1) +#define S3C2412_IISMOD_BCLK_48FS (1 << 1) +#define S3C2412_IISMOD_BCLK_16FS (2 << 1) +#define S3C2412_IISMOD_BCLK_24FS (3 << 1) +#define S3C2412_IISMOD_BCLK_MASK (3 << 1) +#define S3C2412_IISMOD_8BIT (1 << 0) + +#define S3C2412_IISPSR_PSREN (1 << 15) + +#define S3C2412_IISFIC_TXFLUSH (1 << 15) +#define S3C2412_IISFIC_RXFLUSH (1 << 7) +#define S3C2412_IISFIC_TXCOUNT(x) (((x) >> 8) & 0xf) +#define S3C2412_IISFIC_RXCOUNT(x) (((x) >> 0) & 0xf) + + + +#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */ + diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/include/asm-arm/plat-s3c24xx/regs-spi.h index 4a499a138256..ea565b007d04 100644 --- a/include/asm-arm/plat-s3c24xx/regs-spi.h +++ b/include/asm-arm/plat-s3c24xx/regs-spi.h @@ -17,6 +17,21 @@ #define S3C2410_SPCON (0x00) +#define S3C2412_SPCON_RXFIFO_RB2 (0<<14) +#define S3C2412_SPCON_RXFIFO_RB4 (1<<14) +#define S3C2412_SPCON_RXFIFO_RB12 (2<<14) +#define S3C2412_SPCON_RXFIFO_RB14 (3<<14) +#define S3C2412_SPCON_TXFIFO_RB2 (0<<12) +#define S3C2412_SPCON_TXFIFO_RB4 (1<<12) +#define S3C2412_SPCON_TXFIFO_RB12 (2<<12) +#define S3C2412_SPCON_TXFIFO_RB14 (3<<12) +#define S3C2412_SPCON_RXFIFO_RESET (1<<11) /* RxFIFO reset */ +#define S3C2412_SPCON_TXFIFO_RESET (1<<10) /* TxFIFO reset */ +#define S3C2412_SPCON_RXFIFO_EN (1<<9) /* RxFIFO Enable */ +#define S3C2412_SPCON_TXFIFO_EN (1<<8) /* TxFIFO Enable */ + +#define S3C2412_SPCON_DIRC_RX (1<<7) + #define S3C2410_SPCON_SMOD_DMA (2<<5) /* DMA mode */ #define S3C2410_SPCON_SMOD_INT (1<<5) /* interrupt mode */ #define S3C2410_SPCON_SMOD_POLL (0<<5) /* polling mode */ @@ -34,10 +49,19 @@ #define S3C2410_SPSTA (0x04) +#define S3C2412_SPSTA_RXFIFO_AE (1<<11) +#define S3C2412_SPSTA_TXFIFO_AE (1<<10) +#define S3C2412_SPSTA_RXFIFO_ERROR (1<<9) +#define S3C2412_SPSTA_TXFIFO_ERROR (1<<8) +#define S3C2412_SPSTA_RXFIFO_FIFO (1<<7) +#define S3C2412_SPSTA_RXFIFO_EMPTY (1<<6) +#define S3C2412_SPSTA_TXFIFO_NFULL (1<<5) +#define S3C2412_SPSTA_TXFIFO_EMPTY (1<<4) + #define S3C2410_SPSTA_DCOL (1<<2) /* Data Collision Error */ #define S3C2410_SPSTA_MULD (1<<1) /* Multi Master Error */ #define S3C2410_SPSTA_READY (1<<0) /* Data Tx/Rx ready */ - +#define S3C2412_SPSTA_READY_ORG (1<<3) #define S3C2410_SPPIN (0x08) @@ -46,9 +70,13 @@ #define S3C2400_SPPIN_nCS (1<<1) /* SPI Card Select */ #define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */ - #define S3C2410_SPPRE (0x0C) #define S3C2410_SPTDAT (0x10) #define S3C2410_SPRDAT (0x14) +#define S3C2412_TXFIFO (0x18) +#define S3C2412_RXFIFO (0x18) +#define S3C2412_SPFIC (0x24) + + #endif /* __ASM_ARCH_REGS_SPI_H */ diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h index 5599d4e5e708..a4ce457199d3 100644 --- a/include/asm-arm/proc-fns.h +++ b/include/asm-arm/proc-fns.h @@ -185,6 +185,14 @@ # define CPU_NAME cpu_xsc3 # endif # endif +# ifdef CONFIG_CPU_FEROCEON +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_feroceon +# endif +# endif # ifdef CONFIG_CPU_V6 # ifdef CPU_NAME # undef MULTI_CPU diff --git a/include/asm-arm/traps.h b/include/asm-arm/traps.h index d4f34dc83eb0..f1541afcf85c 100644 --- a/include/asm-arm/traps.h +++ b/include/asm-arm/traps.h @@ -15,4 +15,13 @@ struct undef_hook { void register_undef_hook(struct undef_hook *hook); void unregister_undef_hook(struct undef_hook *hook); +static inline int in_exception_text(unsigned long ptr) +{ + extern char __exception_text_start[]; + extern char __exception_text_end[]; + + return ptr >= (unsigned long)&__exception_text_start && + ptr < (unsigned long)&__exception_text_end; +} + #endif diff --git a/include/asm-arm/vfp.h b/include/asm-arm/vfp.h index bd6be9d7f772..5f9a2cb3d452 100644 --- a/include/asm-arm/vfp.h +++ b/include/asm-arm/vfp.h @@ -7,7 +7,11 @@ #define FPSID cr0 #define FPSCR cr1 +#define MVFR1 cr6 +#define MVFR0 cr7 #define FPEXC cr8 +#define FPINST cr9 +#define FPINST2 cr10 /* FPSID bits */ #define FPSID_IMPLEMENTER_BIT (24) @@ -28,6 +32,19 @@ /* FPEXC bits */ #define FPEXC_EX (1 << 31) #define FPEXC_EN (1 << 30) +#define FPEXC_DEX (1 << 29) +#define FPEXC_FP2V (1 << 28) +#define FPEXC_VV (1 << 27) +#define FPEXC_TFV (1 << 26) +#define FPEXC_LENGTH_BIT (8) +#define FPEXC_LENGTH_MASK (7 << FPEXC_LENGTH_BIT) +#define FPEXC_IDF (1 << 7) +#define FPEXC_IXF (1 << 4) +#define FPEXC_UFF (1 << 3) +#define FPEXC_OFF (1 << 2) +#define FPEXC_DZF (1 << 1) +#define FPEXC_IOF (1 << 0) +#define FPEXC_TRAP_MASK (FPEXC_IDF|FPEXC_IXF|FPEXC_UFF|FPEXC_OFF|FPEXC_DZF|FPEXC_IOF) /* FPSCR bits */ #define FPSCR_DEFAULT_NAN (1<<25) @@ -55,20 +72,9 @@ #define FPSCR_IXC (1<<4) #define FPSCR_IDC (1<<7) -/* - * VFP9-S specific. - */ -#define FPINST cr9 -#define FPINST2 cr10 - -/* FPEXC bits */ -#define FPEXC_FPV2 (1<<28) -#define FPEXC_LENGTH_BIT (8) -#define FPEXC_LENGTH_MASK (7 << FPEXC_LENGTH_BIT) -#define FPEXC_INV (1 << 7) -#define FPEXC_UFC (1 << 3) -#define FPEXC_OFC (1 << 2) -#define FPEXC_IOC (1 << 0) +/* MVFR0 bits */ +#define MVFR0_A_SIMD_BIT (0) +#define MVFR0_A_SIMD_MASK (0xf << MVFR0_A_SIMD_BIT) /* Bit patterns for decoding the packaged operation descriptors */ #define VFPOPDESC_LENGTH_BIT (9) diff --git a/include/asm-arm/vfpmacros.h b/include/asm-arm/vfpmacros.h index 27fe028b4e72..cccb3892e73c 100644 --- a/include/asm-arm/vfpmacros.h +++ b/include/asm-arm/vfpmacros.h @@ -15,19 +15,33 @@ .endm @ read all the working registers back into the VFP - .macro VFPFLDMIA, base + .macro VFPFLDMIA, base, tmp #if __LINUX_ARM_ARCH__ < 6 LDC p11, cr0, [\base],#33*4 @ FLDMIAX \base!, {d0-d15} #else LDC p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d0-d15} #endif +#ifdef CONFIG_VFPv3 + VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 + and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field + cmp \tmp, #2 @ 32 x 64bit registers? + ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + addne \base, \base, #32*4 @ step over unused register space +#endif .endm @ write all the working registers out of the VFP - .macro VFPFSTMIA, base + .macro VFPFSTMIA, base, tmp #if __LINUX_ARM_ARCH__ < 6 STC p11, cr0, [\base],#33*4 @ FSTMIAX \base!, {d0-d15} #else STC p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d0-d15} #endif +#ifdef CONFIG_VFPv3 + VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 + and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field + cmp \tmp, #2 @ 32 x 64bit registers? + stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + addne \base, \base, #32*4 @ step over unused register space +#endif .endm diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h index 0dc20261c1ea..44d0bfa1f409 100644 --- a/include/asm-avr32/arch-at32ap/cpu.h +++ b/include/asm-avr32/arch-at32ap/cpu.h @@ -30,5 +30,6 @@ #define cpu_is_at91sam9261() (0) #define cpu_is_at91sam9263() (0) #define cpu_is_at91sam9rl() (0) +#define cpu_is_at91cap9() (0) #endif /* __ASM_ARCH_CPU_H */ diff --git a/include/linux/mv643xx.h b/include/linux/mv643xx.h index d2ae6185f03b..69327b7b4ce4 100644 --- a/include/linux/mv643xx.h +++ b/include/linux/mv643xx.h @@ -15,6 +15,7 @@ #include <asm/types.h> #include <linux/mv643xx_eth.h> +#include <linux/mv643xx_i2c.h> /****************************************/ /* Processor Address Space */ @@ -863,7 +864,6 @@ /* I2C Registers */ /****************************************/ -#define MV64XXX_I2C_CTLR_NAME "mv64xxx_i2c" #define MV64XXX_I2C_OFFSET 0xc000 #define MV64XXX_I2C_REG_BLOCK_SIZE 0x0020 @@ -968,14 +968,6 @@ struct mpsc_pdata { u32 brg_clk_freq; }; -/* i2c Platform Device, Driver Data */ -struct mv64xxx_i2c_pdata { - u32 freq_m; - u32 freq_n; - u32 timeout; /* In milliseconds */ - u32 retries; -}; - /* Watchdog Platform Device, Driver Data */ #define MV64x60_WDT_NAME "mv64x60_wdt" diff --git a/include/linux/mv643xx_i2c.h b/include/linux/mv643xx_i2c.h new file mode 100644 index 000000000000..5db5152e9de5 --- /dev/null +++ b/include/linux/mv643xx_i2c.h @@ -0,0 +1,22 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _MV64XXX_I2C_H_ +#define _MV64XXX_I2C_H_ + +#include <linux/types.h> + +#define MV64XXX_I2C_CTLR_NAME "mv64xxx_i2c" + +/* i2c Platform Device, Driver Data */ +struct mv64xxx_i2c_pdata { + u32 freq_m; + u32 freq_n; + u32 timeout; /* In milliseconds */ +}; + +#endif /*_MV64XXX_I2C_H_*/ diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c index b48c72923a13..88490418f932 100644 --- a/sound/oss/waveartist.c +++ b/sound/oss/waveartist.c @@ -835,7 +835,7 @@ static struct audio_driver waveartist_audio_driver = { static irqreturn_t waveartist_intr(int irq, void *dev_id) { - wavnc_info *devc = (wavnc_info *)dev_id; + wavnc_info *devc = dev_id; int irqstatus, status; spin_lock(&waveartist_lock); |