[SCSI] lpfc 8.3.29: SLI related fixes

SLI related fixes:

- Fix REG_RPI fails on SLI4 HBA putting NPort into NPR state (126230)
- Fix ELS FDISC failing with local reject / invalid RPI. (126350)
- Fix reset port when reset is needed during fw_dump (125807)
- Fix unbounded firmware revision string from port cause panic (126560)
- Fix driver behavior when receiving an ADISC (126654)
- Fix driver not returning when bad ndlp found in abts error event
  handling (126209)
- Add more driver logs in area of SLI4 port error attention and reset
  recovery (126813, 124466)
- Fix failure in handling large CQ/EQ identifiers in an IOV
  environment (126856)
- Fix for driver using duplicate RPIs after lancer port reset (126723)
- Clear vport->fc_myDID in lpfc_els_issue_fdisc to guarentee a
  zero SID (126779, 126897)
- Fix for SLI4 Port delivery for BLS ABORT ACC (126289)

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

11 files changed, 207 insertions, 34 deletions

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index f6697cb0e216..296ad5bc4240 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -353,7 +353,7 @@ lpfc_fwrev_show(struct device *dev, struct device_attribute *attr,
 	struct lpfc_hba   *phba = vport->phba;
 	uint32_t if_type;
 	uint8_t sli_family;
-	char fwrev[32];
+	char fwrev[FW_REV_STR_SIZE];
 	int len;
 
 	lpfc_decode_firmware_rev(phba, fwrev, 1);
@@ -922,11 +922,15 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
 	rc = lpfc_sli4_pdev_status_reg_wait(phba);
 
 	if (rc == -EPERM) {
-		/* no privilage for reset, restore if needed */
-		if (before_fc_flag & FC_OFFLINE_MODE)
-			goto out;
+		/* no privilage for reset */
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"3150 No privilage to perform the requested "
+				"access: x%x\n", reg_val);
 	} else if (rc == -EIO) {
 		/* reset failed, there is nothing more we can do */
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"3153 Fail to perform the requested "
+				"access: x%x\n", reg_val);
 		return rc;
 	}
 
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 6cb360d47ba3..141e4b40bb55 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -3980,7 +3980,7 @@ lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 			case COMN_OPCODE_GET_CNTL_ADDL_ATTRIBUTES:
 				lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
 						"3106 Handled SLI_CONFIG "
-						"subsys_fcoe, opcode:x%x\n",
+						"subsys_comn, opcode:x%x\n",
 						opcode);
 				rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job,
 							nemb_mse, dmabuf);
@@ -3988,7 +3988,7 @@ lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 			default:
 				lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
 						"3107 Reject SLI_CONFIG "
-						"subsys_fcoe, opcode:x%x\n",
+						"subsys_comn, opcode:x%x\n",
 						opcode);
 				rc = -EPERM;
 				break;
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 26924b7a6cde..330dd7192a7f 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -462,3 +462,4 @@ int lpfc_issue_unreg_vfi(struct lpfc_vport *);
 int lpfc_selective_reset(struct lpfc_hba *);
 int lpfc_sli4_read_config(struct lpfc_hba *phba);
 int lpfc_scsi_buf_update(struct lpfc_hba *phba);
+void lpfc_sli4_node_prep(struct lpfc_hba *phba);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 707081d0a226..93e96b3c9097 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1076,7 +1076,7 @@ int
 lpfc_vport_symbolic_node_name(struct lpfc_vport *vport, char *symbol,
 	size_t size)
 {
-	char fwrev[16];
+	char fwrev[FW_REV_STR_SIZE];
 	int n;
 
 	lpfc_decode_firmware_rev(vport->phba, fwrev, 0);
@@ -1834,7 +1834,7 @@ lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
 	uint8_t *fwname;
 
 	if (phba->sli_rev == LPFC_SLI_REV4)
-		sprintf(fwrevision, "%s", vp->rev.opFwName);
+		snprintf(fwrevision, FW_REV_STR_SIZE, "%s", vp->rev.opFwName);
 	else if (vp->rev.rBit) {
 		if (psli->sli_flag & LPFC_SLI_ACTIVE)
 			rev = vp->rev.sli2FwRev;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 7afc757338de..2e7709f680bc 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -7172,7 +7172,7 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			goto out;
 		/* FDISC failed */
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
-				 "0126 FDISC failed. (%d/%d)\n",
+				 "0126 FDISC failed. (x%x/x%x)\n",
 				 irsp->ulpStatus, irsp->un.ulpWord[4]);
 		goto fdisc_failed;
 	}
@@ -7283,6 +7283,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	int rc;
 
 	vport->port_state = LPFC_FDISC;
+	vport->fc_myDID = 0;
 	cmdsize = (sizeof(uint32_t) + sizeof(struct serv_parm));
 	elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp, did,
 				     ELS_CMD_FDISC);
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 7b3dbf316bb3..5f280b5ae3db 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -70,6 +70,7 @@
 /* vendor ID used in SCSI netlink calls */
 #define LPFC_NL_VENDOR_ID (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX)
 
+#define FW_REV_STR_SIZE	32
 /* Common Transport structures and definitions */
 
 union CtRevisionId {
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index e5bfa7f334e3..cc19bc1b5ace 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -715,12 +715,20 @@ struct lpfc_register {
 #define lpfc_eqcq_doorbell_eqci_SHIFT		9
 #define lpfc_eqcq_doorbell_eqci_MASK		0x0001
 #define lpfc_eqcq_doorbell_eqci_WORD		word0
-#define lpfc_eqcq_doorbell_cqid_SHIFT		0
-#define lpfc_eqcq_doorbell_cqid_MASK		0x03FF
-#define lpfc_eqcq_doorbell_cqid_WORD		word0
-#define lpfc_eqcq_doorbell_eqid_SHIFT		0
-#define lpfc_eqcq_doorbell_eqid_MASK		0x01FF
-#define lpfc_eqcq_doorbell_eqid_WORD		word0
+#define lpfc_eqcq_doorbell_cqid_lo_SHIFT	0
+#define lpfc_eqcq_doorbell_cqid_lo_MASK		0x03FF
+#define lpfc_eqcq_doorbell_cqid_lo_WORD		word0
+#define lpfc_eqcq_doorbell_cqid_hi_SHIFT	11
+#define lpfc_eqcq_doorbell_cqid_hi_MASK		0x001F
+#define lpfc_eqcq_doorbell_cqid_hi_WORD		word0
+#define lpfc_eqcq_doorbell_eqid_lo_SHIFT	0
+#define lpfc_eqcq_doorbell_eqid_lo_MASK		0x01FF
+#define lpfc_eqcq_doorbell_eqid_lo_WORD		word0
+#define lpfc_eqcq_doorbell_eqid_hi_SHIFT	11
+#define lpfc_eqcq_doorbell_eqid_hi_MASK		0x001F
+#define lpfc_eqcq_doorbell_eqid_hi_WORD		word0
+#define LPFC_CQID_HI_FIELD_SHIFT		10
+#define LPFC_EQID_HI_FIELD_SHIFT		9
 
 #define LPFC_BMBX			0x0160
 #define lpfc_bmbx_addr_SHIFT		2
@@ -3313,7 +3321,11 @@ struct xmit_bls_rsp64_wqe {
 	uint32_t rsrvd4;
 	struct wqe_did	wqe_dest;
 	struct wqe_common wqe_com; /* words 6-11 */
-	uint32_t rsvd_12_15[4];
+	uint32_t word12;
+#define xmit_bls_rsp64_temprpi_SHIFT  0
+#define xmit_bls_rsp64_temprpi_MASK   0x0000ffff
+#define xmit_bls_rsp64_temprpi_WORD   word12
+	uint32_t rsvd_13_15[3];
 };
 
 struct wqe_rctl_dfctl {
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index d670b1c410ec..f3ad7349f5d1 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1475,8 +1475,12 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 				phba->sli4_hba.u.if_type2.STATUSregaddr,
 				&portstat_reg.word0);
 		/* consider PCI bus read error as pci_channel_offline */
-		if (pci_rd_rc1 == -EIO)
+		if (pci_rd_rc1 == -EIO) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"3151 PCI bus read access failure: x%x\n",
+				readl(phba->sli4_hba.u.if_type2.STATUSregaddr));
 			return;
+		}
 		reg_err1 = readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
 		reg_err2 = readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
 		if (bf_get(lpfc_sliport_status_oti, &portstat_reg)) {
@@ -1526,6 +1530,9 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 			}
 			/* fall through for not able to recover */
 		}
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"3152 Unrecoverable error, bring the port "
+				"offline\n");
 		lpfc_sli4_offline_eratt(phba);
 		break;
 	case LPFC_SLI_INTF_IF_TYPE_1:
@@ -2514,6 +2521,42 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba)
 }
 
 /**
+ * lpfc_sli4_node_prep - Assign RPIs for active nodes.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * Allocate RPIs for all active remote nodes. This is needed whenever
+ * an SLI4 adapter is reset and the driver is not unloading. Its purpose
+ * is to fixup the temporary rpi assignments.
+ **/
+void
+lpfc_sli4_node_prep(struct lpfc_hba *phba)
+{
+	struct lpfc_nodelist  *ndlp, *next_ndlp;
+	struct lpfc_vport **vports;
+	int i;
+
+	if (phba->sli_rev != LPFC_SLI_REV4)
+		return;
+
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL) {
+		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+			if (vports[i]->load_flag & FC_UNLOADING)
+				continue;
+
+			list_for_each_entry_safe(ndlp, next_ndlp,
+						 &vports[i]->fc_nodes,
+						 nlp_listp) {
+				if (NLP_CHK_NODE_ACT(ndlp))
+					ndlp->nlp_rpi =
+						lpfc_sli4_alloc_rpi(phba);
+			}
+		}
+	}
+	lpfc_destroy_vport_work_array(phba, vports);
+}
+
+/**
  * lpfc_online - Initialize and bring a HBA online
  * @phba: pointer to lpfc hba data structure.
  *
@@ -2654,6 +2697,15 @@ lpfc_offline_prep(struct lpfc_hba * phba)
 				}
 				spin_lock_irq(shost->host_lock);
 				ndlp->nlp_flag &= ~NLP_NPR_ADISC;
+
+				/*
+				 * Whenever an SLI4 port goes offline, free the
+				 * RPI.  A new RPI when the adapter port comes
+				 * back online.
+				 */
+				if (phba->sli_rev == LPFC_SLI_REV4)
+					lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
+
 				spin_unlock_irq(shost->host_lock);
 				lpfc_unreg_rpi(vports[i], ndlp);
 			}
@@ -7224,19 +7276,17 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
 					rc = -ENODEV;
 					goto out;
 				}
-				if (bf_get(lpfc_sliport_status_rdy, &reg_data))
-					break;
-				if (bf_get(lpfc_sliport_status_rn, &reg_data)) {
+				if (bf_get(lpfc_sliport_status_rn, &reg_data))
 					reset_again++;
+				if (bf_get(lpfc_sliport_status_rdy, &reg_data))
 					break;
-				}
 			}
 
 			/*
 			 * If the port responds to the init request with
 			 * reset needed, delay for a bit and restart the loop.
 			 */
-			if (reset_again) {
+			if (reset_again && (rdy_chk < 1000)) {
 				msleep(10);
 				reset_again = 0;
 				continue;
@@ -9059,7 +9109,7 @@ lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
 int
 lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw)
 {
-	char fwrev[32];
+	char fwrev[FW_REV_STR_SIZE];
 	struct lpfc_grp_hdr *image = (struct lpfc_grp_hdr *)fw->data;
 	struct list_head dma_buffer_list;
 	int i, rc = 0;
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index e8bb00559943..32b6d72cd98d 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -48,6 +48,10 @@ static int
 lpfc_check_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		 struct lpfc_name *nn, struct lpfc_name *pn)
 {
+	/* First, we MUST have a RPI registered */
+	if (!(ndlp->nlp_flag & NLP_RPI_REGISTERED))
+		return 0;
+
 	/* Compare the ADISC rsp WWNN / WWPN matches our internal node
 	 * table entry for that node.
 	 */
@@ -385,6 +389,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	if (!mbox)
 		goto out;
 
+	/* Registering an existing RPI behaves differently for SLI3 vs SLI4 */
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		lpfc_unreg_rpi(vport, ndlp);
+
 	rc = lpfc_reg_rpi(phba, vport->vpi, icmd->un.rcvels.remoteID,
 			    (uint8_t *) sp, mbox, ndlp->nlp_rpi);
 	if (rc) {
@@ -445,11 +453,42 @@ out:
 	return 0;
 }
 
+/**
+ * lpfc_mbx_cmpl_resume_rpi - Resume RPI completion routine
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to mailbox object
+ *
+ * This routine is invoked to issue a completion to a rcv'ed
+ * ADISC or PDISC after the paused RPI has been resumed.
+ **/
+static void
+lpfc_mbx_cmpl_resume_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_vport *vport;
+	struct lpfc_iocbq *elsiocb;
+	struct lpfc_nodelist *ndlp;
+	uint32_t cmd;
+
+	elsiocb = (struct lpfc_iocbq *)mboxq->context1;
+	ndlp = (struct lpfc_nodelist *) mboxq->context2;
+	vport = mboxq->vport;
+	cmd = elsiocb->drvrTimeout;
+
+	if (cmd == ELS_CMD_ADISC) {
+		lpfc_els_rsp_adisc_acc(vport, elsiocb, ndlp);
+	} else {
+		lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, elsiocb,
+			ndlp, NULL);
+	}
+	kfree(elsiocb);
+}
+
 static int
 lpfc_rcv_padisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		struct lpfc_iocbq *cmdiocb)
 {
 	struct Scsi_Host   *shost = lpfc_shost_from_vport(vport);
+	struct lpfc_iocbq  *elsiocb;
 	struct lpfc_dmabuf *pcmd;
 	struct serv_parm   *sp;
 	struct lpfc_name   *pnn, *ppn;
@@ -475,12 +514,43 @@ lpfc_rcv_padisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 
 	icmd = &cmdiocb->iocb;
 	if (icmd->ulpStatus == 0 && lpfc_check_adisc(vport, ndlp, pnn, ppn)) {
+
+		/*
+		 * As soon as  we send ACC, the remote NPort can
+		 * start sending us data. Thus, for SLI4 we must
+		 * resume the RPI before the ACC goes out.
+		 */
+		if (vport->phba->sli_rev == LPFC_SLI_REV4) {
+			elsiocb = kmalloc(sizeof(struct lpfc_iocbq),
+				GFP_KERNEL);
+			if (elsiocb) {
+
+				/* Save info from cmd IOCB used in rsp */
+				memcpy((uint8_t *)elsiocb, (uint8_t *)cmdiocb,
+					sizeof(struct lpfc_iocbq));
+
+				/* Save the ELS cmd */
+				elsiocb->drvrTimeout = cmd;
+
+				lpfc_sli4_resume_rpi(ndlp,
+					lpfc_mbx_cmpl_resume_rpi, elsiocb);
+				goto out;
+			}
+		}
+
 		if (cmd == ELS_CMD_ADISC) {
 			lpfc_els_rsp_adisc_acc(vport, cmdiocb, ndlp);
 		} else {
-			lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp,
-					 NULL);
+			lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb,
+				ndlp, NULL);
 		}
+out:
+		/* If we are authenticated, move to the proper state */
+		if (ndlp->nlp_type & NLP_FCP_TARGET)
+			lpfc_nlp_set_state(vport, ndlp, NLP_STE_MAPPED_NODE);
+		else
+			lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
+
 		return 1;
 	}
 	/* Reject this request because invalid parameters */
@@ -1229,7 +1299,7 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_vport *vport,
 	}
 
 	if (phba->sli_rev == LPFC_SLI_REV4) {
-		rc = lpfc_sli4_resume_rpi(ndlp);
+		rc = lpfc_sli4_resume_rpi(ndlp, NULL, NULL);
 		if (rc) {
 			/* Stay in state and retry. */
 			ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 42ea367ddba7..1a391e2df3b3 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -293,7 +293,9 @@ lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
 	}
 	bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
 	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
-	bf_set(lpfc_eqcq_doorbell_eqid, &doorbell, q->queue_id);
+	bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell,
+			(q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT));
+	bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id);
 	writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
 	/* PCI read to flush PCI pipeline on re-arming for INTx mode */
 	if ((q->phba->intr_type == INTx) && (arm == LPFC_QUEUE_REARM))
@@ -372,7 +374,9 @@ lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
 		bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
 	bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
 	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_COMPLETION);
-	bf_set(lpfc_eqcq_doorbell_cqid, &doorbell, q->queue_id);
+	bf_set(lpfc_eqcq_doorbell_cqid_hi, &doorbell,
+			(q->queue_id >> LPFC_CQID_HI_FIELD_SHIFT));
+	bf_set(lpfc_eqcq_doorbell_cqid_lo, &doorbell, q->queue_id);
 	writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
 	return released;
 }
@@ -5596,6 +5600,8 @@ lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba)
 		for (i = 0; i < count; i++)
 			phba->sli4_hba.rpi_ids[i] = base + i;
 
+		lpfc_sli4_node_prep(phba);
+
 		/* VPIs. */
 		count = phba->sli4_hba.max_cfg_param.max_vpi;
 		base = phba->sli4_hba.max_cfg_param.vpi_base;
@@ -7555,6 +7561,8 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
 
 	sgl  = (struct sli4_sge *)sglq->sgl;
 	icmd = &piocbq->iocb;
+	if (icmd->ulpCommand == CMD_XMIT_BLS_RSP64_CX)
+		return sglq->sli4_xritag;
 	if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
 		numBdes = icmd->un.genreq64.bdl.bdeSize /
 				sizeof(struct ulp_bde64);
@@ -7756,6 +7764,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
 			if (pcmd && (*pcmd == ELS_CMD_FLOGI ||
 				*pcmd == ELS_CMD_SCR ||
+				*pcmd == ELS_CMD_FDISC ||
 				*pcmd == ELS_CMD_PLOGI)) {
 				bf_set(els_req64_sp, &wqe->els_req, 1);
 				bf_set(els_req64_sid, &wqe->els_req,
@@ -7982,6 +7991,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		xritag = 0;
 		break;
 	case CMD_XMIT_BLS_RSP64_CX:
+		ndlp = (struct lpfc_nodelist *)iocbq->context1;
 		/* As BLS ABTS RSP WQE is very different from other WQEs,
 		 * we re-construct this WQE here based on information in
 		 * iocbq from scratch.
@@ -8008,8 +8018,15 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		}
 		bf_set(xmit_bls_rsp64_seqcnthi, &wqe->xmit_bls_rsp, 0xffff);
 		bf_set(wqe_xmit_bls_pt, &wqe->xmit_bls_rsp.wqe_dest, 0x1);
+
+		/* Use CT=VPI */
+		bf_set(wqe_els_did, &wqe->xmit_bls_rsp.wqe_dest,
+			ndlp->nlp_DID);
+		bf_set(xmit_bls_rsp64_temprpi, &wqe->xmit_bls_rsp,
+			iocbq->iocb.ulpContext);
+		bf_set(wqe_ct, &wqe->xmit_bls_rsp.wqe_com, 1);
 		bf_set(wqe_ctxt_tag, &wqe->xmit_bls_rsp.wqe_com,
-		       iocbq->iocb.ulpContext);
+			phba->vpi_ids[phba->pport->vpi]);
 		bf_set(wqe_qosd, &wqe->xmit_bls_rsp.wqe_com, 1);
 		bf_set(wqe_lenloc, &wqe->xmit_bls_rsp.wqe_com,
 		       LPFC_WQE_LENLOC_NONE);
@@ -8073,8 +8090,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
 
 	if (piocb->sli4_xritag == NO_XRI) {
 		if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
-		    piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN ||
-		    piocb->iocb.ulpCommand == CMD_XMIT_BLS_RSP64_CX)
+		    piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
 			sglq = NULL;
 		else {
 			if (pring->txq_cnt) {
@@ -8384,10 +8400,13 @@ lpfc_sli4_abts_err_handler(struct lpfc_hba *phba,
 {
 	struct lpfc_vport *vport;
 
-	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
+	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
 		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
 				"3115 Node Context not found, driver "
 				"ignoring abts err event\n");
+		return;
+	}
+
 	vport = ndlp->vport;
 	lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 			"3116 Port generated FCP XRI ABORT event on "
@@ -14042,6 +14061,13 @@ lpfc_sli4_seq_abort_rsp_cmpl(struct lpfc_hba *phba,
 {
 	if (cmd_iocbq)
 		lpfc_sli_release_iocbq(phba, cmd_iocbq);
+
+	/* Failure means BLS ABORT RSP did not get delivered to remote node*/
+	if (rsp_iocbq && rsp_iocbq->iocb.ulpStatus)
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"3154 BLS ABORT RSP failed, data:  x%x/x%x\n",
+			rsp_iocbq->iocb.ulpStatus,
+			rsp_iocbq->iocb.un.ulpWord[4]);
 }
 
 /**
@@ -14748,7 +14774,8 @@ lpfc_sli4_remove_rpis(struct lpfc_hba *phba)
  * provided rpi via a bitmask.
  **/
 int
-lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp)
+lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp,
+	void (*cmpl)(struct lpfc_hba *, LPFC_MBOXQ_t *), void *arg)
 {
 	LPFC_MBOXQ_t *mboxq;
 	struct lpfc_hba *phba = ndlp->phba;
@@ -14761,6 +14788,12 @@ lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp)
 
 	/* Post all rpi memory regions to the port. */
 	lpfc_resume_rpi(mboxq, ndlp);
+	if (cmpl) {
+		mboxq->mbox_cmpl = cmpl;
+		mboxq->context1 = arg;
+		mboxq->context2 = ndlp;
+	}
+	mboxq->vport = ndlp->vport;
 	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
 	if (rc == MBX_NOT_FINISHED) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 3f266e2c54e0..c19d139618b7 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -633,7 +633,8 @@ void lpfc_sli4_free_rpi(struct lpfc_hba *, int);
 void lpfc_sli4_remove_rpis(struct lpfc_hba *);
 void lpfc_sli4_async_event_proc(struct lpfc_hba *);
 void lpfc_sli4_fcf_redisc_event_proc(struct lpfc_hba *);
-int lpfc_sli4_resume_rpi(struct lpfc_nodelist *);
+int lpfc_sli4_resume_rpi(struct lpfc_nodelist *,
+			void (*)(struct lpfc_hba *, LPFC_MBOXQ_t *), void *);
 void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *);
 void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *);
 void lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *,