treewide: fix typo of "suppport" in various comments

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

6 files changed, 6 insertions, 6 deletions

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 8b3a9c0e771d..0a88cb5d316d 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1,5 +1,5 @@
 /*
- * kvm_ia64.c: Basic KVM suppport On Itanium series processors
+ * kvm_ia64.c: Basic KVM support On Itanium series processors
  *
  *
  * 	Copyright (C) 2007, Intel Corporation.
diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index 9089d00f1421..14e30515f6aa 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -1671,7 +1671,7 @@ static void e1000_get_wol(struct net_device *netdev,
 	/* apply any specific unsupported masks here */
 	switch (hw->device_id) {
 	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
-		/* KSP3 does not suppport UCAST wake-ups */
+		/* KSP3 does not support UCAST wake-ups */
 		wol->supported &= ~WAKE_UCAST;
 
 		if (adapter->wol & E1000_WUFC_EX)
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index ff306d763e37..71ab320fae82 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -1155,7 +1155,7 @@ int zd_chip_init_hw(struct zd_chip *chip)
 	if (r)
 		goto out;
 	/* Currently we support IEEE 802.11g for full and high speed USB.
-	 * It might be discussed, whether we should suppport pure b mode for
+	 * It might be discussed, whether we should support pure b mode for
 	 * full speed USB.
 	 */
 	r = set_mandatory_rates(chip, 1);
diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
index 6d6eee42ac7d..ef60afa94d0e 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
@@ -296,7 +296,7 @@ int bnx2fc_send_session_ofld_req(struct fcoe_port *port,
 	ofld_req3.flags |= (interface->vlan_enabled <<
 			    FCOE_KWQE_CONN_OFFLOAD3_B_VLAN_FLAG_SHIFT);
 
-	/* C2_VALID and ACK flags are not set as they are not suppported */
+	/* C2_VALID and ACK flags are not set as they are not supported */
 
 
 	/* Initialize offload request 4 structure */
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 89d90b5fb787..6992d35c5e39 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -51,7 +51,7 @@
  * full speed USB controllers, including the at91rm9200 (arm920T, with MMU),
  * at91sam926x (arm926ejs, with MMU), and several no-mmu versions.
  *
- * This driver expects the board has been wired with two GPIOs suppporting
+ * This driver expects the board has been wired with two GPIOs supporting
  * a VBUS sensing IRQ, and a D+ pullup.  (They may be omitted, but the
  * testing hasn't covered such cases.)
  *
diff --git a/sound/pci/emu10k1/emu10k1_patch.c b/sound/pci/emu10k1/emu10k1_patch.c
index e10f027bde03..662a45876a8b 100644
--- a/sound/pci/emu10k1/emu10k1_patch.c
+++ b/sound/pci/emu10k1/emu10k1_patch.c
@@ -123,7 +123,7 @@ snd_emu10k1_sample_new(struct snd_emux *rec, struct snd_sf_sample *sp,
 	offset += size;
 	data += size;
 
-#if 0 /* not suppported yet */
+#if 0 /* not supported yet */
 	/* handle reverse (or bidirectional) loop */
 	if (sp->v.mode_flags & (SNDRV_SFNT_SAMPLE_BIDIR_LOOP|SNDRV_SFNT_SAMPLE_REVERSE_LOOP)) {
 		/* copy loop in reverse */